Escolar Documentos
Profissional Documentos
Cultura Documentos
Conduit Steel
Heavy Gauge Conduit Welded - Screwed
Manufactured in accordance with BS EN 61386 / BS 4568 / BS 31 where applicable. Each 3.75
metre or 3.0 metre length is supplied screwed both ends and complete with one solid coupling.
The conduit is packed and shipped in lifts (also known as Master Bundles). Each lift comprising
the stated number of individual bundles measuring approximately 45-50 centimetres in
diameter and 3.75 or 3.0 metres long. The weight varies according to size and
finish of conduit but approximate weights are shown below for 3.75 metre lengths.
Barton branded to: BS 4568 / Part 1 1970 Class 4. 20mm 8 50 1500 1.11
HOT DIPPED GALVANISED INSIDE & OUTSIDE
3.75 metre lengths. (20 + 25mm also available 25mm 8 40 1200 1.13
in 3.0 metre) LENGTHS
32mm 4 25 375 0.46
BS 31 Class 4 finish HOT DIPPED GALVANISED INSIDE & 1.5” 4 20 300 0.49
OUTSIDE 3.75 metre lengths
2” 4 20 300 0.74
Class 4 corrosion protection is achieved with a hot dip galvanised coating applied inside and
outside after the manufacture and offer a high degree of corrosion protection and a bright
metallic appearance.
Class 2 corrosion protection is achieved with a stove enamelled or electro plated coating
applied inside and outside after the tube manufacture and offers a medium degree of corrosion
protection and a black appearance.
Please Note:
Binding materials used to make up bundles of Conduit are not intended to be
used when lifting this product which should be handled only with approved slings.
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Terminal & Back Outlet Box M187 Through & Back Outlet Box M188
Angle & Back Outlet Box M189 Tee & Back Outlet Box M190
Intersection & Back Outlet Box M191 Tangent Through Box M192
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Branch Two Way (U) Box M195 Branch Three Way (Y) Box M196
Finish Galvanised
Box Qty 10 10
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Size - Metric 20mm 25mm 32mm Size - Metric 20mm 25mm 32mm
Size - Metric 20mm 25mm 32mm Size - Metric 20mm 25mm 32mm
Finish Galvanised
Box Qty 5 5 5
Box Qty 5 4
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Finish Galvanised
Box Qty 10 10
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Boxes - Looping In
With tapped hole in base for earthing screw.
20mm clearance.
63.5mm 63.5mm
29mm 31mm
Size Internal Size Internal
Deep Deep
Diameter Diameter
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Adaptable Boxes
Barton Adaptable Boxes are manufactured from steel and are available with plain sides or knock-outs. The standard finishes are Black
Enamel and Hot Dipped Galvanised. (Pre-galvanized lids). Where boxes are supplied with knock-outs the number and size are as follows:
3" 2 20mm
4" 3 20mm
6" 4 20mm
9" 6 20mm
12" 6 20mm
Flanged lids are fitted as standard to all boxes and are secured by M5 x 8mm mushroom head screws. The complete range is manufactured
in accordance with BS 4568 Part 2. A range of Pre-Galvanised Adaptable Boxes are also available on request.
Size
Pack Qty
mm Inches
75 x 75 x 37.5 3 x 3 x 1.5 10
75 x 75 x 50 3x3x2 10
75 x 75 x 75 3x3x3 6
100 x 75 x 50 4x3x2 10
150 x 75 x 50 6x3x2 6
150 x 75 x 75 6x3x3 6
150 x 50 x 50 6x6x2 6
150 x 50 x 75 6x6x3 4
225 x 75 x 50 9x3x2 6
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Adaptable Boxes
Adaptable Boxes, Plain R261
Size
Pack Qty
mm Inches
225 x 75 x 75 9x3x3 6
300 x 150 x 50 12 x 6 x 2 2
300 x 150 x 75 12 x 6 x 3 2
300 x 225 x 50 12 x 9 x 2 2
300 x 225 x 75 12 x 9 x 3 1
300 x 300 x 50 12 x 12 x 2 2
300 x 300 x 75 12 x 12 x 3 1
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Loose, No Screws
Malleable Iron with
Material
Copper Earthwire
Material Steel
Box Qty 25 25
Cover, Female Dome R289 Cover, Ball & Socket, Earthed R290
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Loose, No Screws
Material Steel
Finish Galvanised
Box Qty 50
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Each box is produced with a specified number and size of knock outs which allow adequate
cable entries for wiring purposes.
Nominal Dimensions:
One Gang - 72mm x 72mm
Two Gang - 132mm x 72mm
Material: Pre-coated galvanised steel Barton switch and socket boxes are manufactured in
accordance with BS 4662.
Switch Boxes 16mm Deep BC42RE Switch & Socket Boxes 25mm Deep BC62RE
1 oval fitted
with rubber
1 fixed 2 fixed
One grommet and One
and 1 20 20mm KO’s and 2 20
Gang 3 oval KO’s Gang
adjustable adjustable
for grommet
entry
Switch & Socket Boxes 25mm Deep BC72RE Switch & Socket Boxes 35mm Deep BC82RE2025
1 fixed 3 fixed
One 16mm x One 20 & 25mm
and 1 5 and 1 20
Gang 20mm KO’s Gang KO’s
adjustable adjustable
Switch & Socket Boxes 35mm Deep BC92RE2025 Switch & Socket Boxes 47mm Deep BC14RE
(For use with double thickness partitioning) (For use with double thickness partitioning)
1 fixed 2 fixed
Two 20 & 25mm One 12 & 20mm
and 1 10 and 2 10
Gang KO's Gang KO's
adjustable adjustable
Fixing Pack
Gang Type of Entry
Lugs Qty
1 fixed
Two 20 & 25mm
and 1 5
Gang KO's
adjustable
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Elbows
Elbow, Solid M121 Elbow, Channel Inspection M123
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Bends
Bends, Normal, Internal Thread R141 Bend, Inspection M145
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Tees
Tee, Solid M131 Tee, Channel Inspection M133
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Reducers
Reducer M471
Material Malleable
Finish Galvanised
Box Qty 50 25
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Hooks
Hook, Male M502
Material Steel
Finish Galvanised
Box Qty 50 50
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Couplings
Coupling, solid R101 Coupling, Inspection M103
Material Steel
Malleable Body with Steel
Material
Cover
Finish Galvanised
Box Qty 25 20
Box Qty 50 50 25
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Saddles
Saddle, Hospital M362 Saddle, Distance M363
Box Qty 25 10
Saddle, Spacer Bar, One Way R431 Clip (Half Saddle) F441
Box Qty 50 25
Box Qty 50 50
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Rings
Ring, Extension R294
Material Steel
Finish Galvanised
Box Qty 25 25 25
Box Qty 10 10 10
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Bushes
Bush, Short Male F531 Bush, Long Male F532
Material Brass
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Box Qty 100 100 100 Box Qty 100 100 100
Material Brass
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Washers
Lead F112 Serrated F116
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Locknuts
Locknut, Hexagon Light R507 Locknut, Hexagon Heavy R509
Box Qty 100 100 100 Box Qty 100 100 100
Material Steel
Box Qty 50 25
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Screws
Zinc Plated, M4 Pan Head F645 Brass, M4 Earth Terminal Studs F657
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Gaskets
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Flexible
STANDARD FLEXIBLE METALLIC CONDUIT (UNPACKED)
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Quality
All galvanised steel used in the manufacture of cable trunking and fittings complies with BSEN
50085-1:2005 & BSEN 50085-2-1:2006
Quick Fix
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Quick-Fix Trunking
(1) Cable Trunking - 3m length complete with lid and couplers. Product Code Example. QF/RABT 22. i.e. Quick-Fix/
Right Angle Bend Top 2” x 2”. All 50 x 50mm Fittings are compatible with 50 x 50mm Lighting Trunking.
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Quick-Fix Trunking
150 x 100 QF/TT 64 QF/TI 64 QF/TO 64 150 x 100 TO 100 x 100mm QF/RED 64/44
150 x 150 QF/TT 66 QF/TI 66 QF/TO 66 150 x 150 TO 100 x 100mm QF/RED 66/44
225 x 100 QF/TT 94 QF/TI 94 QF/TO 94 150 x 150 TO 150 x 100mm QF/RED 66/64
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Quick-Fix Trunking
Loose Separator
Dimensions (mm) Stop End Coupler Flanged Cable Retainer Pin Rack
3m Lengths
Non gusset fittings and accessories are available. Hangers are available with 11 mm or 21mm holes.
Manufactured from pre-galvanised sheet steel to BSEN 50085-1:2005 & BSEN 50085-2-1:2005
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Lighting Trunking
Dimensions (mm) Lighting Trunking - Body Only Metal Lid P.V.C Lid
Dimensions (mm) Right Angle Bend - Top Lid Right Angle Bend - Inside Lid Right Angle Bend - Outside Lid
Dimensions (mm) 45 Degree Bend - Top Lid 45 Degree Bend - Inside Lid 45 Degree Bend - Outside Lid
Product Code Example QF/RABT 22 i.e. Quick-Fix/Right Angle Bend Top 2” x 2”.
Dimensions (mm) Tee Bend - Top Lid Tee Bend - Inside Lid Tee Bend - Outside Lid
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Lighting Trunking
LT/SC 22 LT/SC 22
Product Code Example QF/RABT 22 i.e. Quick-Fix/Right Angle Bend Top 2” x 2”.
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Multi-Compartment Trunking
Available in Quick-Fix Systems
For 2 Compartment Trunking add QF/ -----/2 to the listed numbers on the previous pages.
For 2 Compartment Trunking add QF/ -----/3 to the listed numbers on the previous pages.
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
SD2025
SD32 Complete set comprising stock, die and guide for 32mm
Conduit. Overall Dia. of Die 63.5mm.
Stock - Spare
Overall Dia. of Die
ST42
Stock 42mm
ST64
Stock 63.5mm
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Adaptors
Material: Steel
Size 3/4 Male to 20mm Female Size 20mm Male to 3/4 Female
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Nipples
Nipple, Normal F107 Nipple, 300mm Long F109
www.hublebas.co.uk
BARTON ENGINEERING CATALOGUE
Barton Standards
Barton products are generally manufactured in accordance with the relevant British Standards.
Details of particular standards are given below:
STANDARDS
BS EN 50086-1:1994
BS 31 Imperial Sizes
BS 31 Imperial Sizes
BS 4662
www.hublebas.co.uk