Escolar Documentos
Profissional Documentos
Cultura Documentos
Ceiling
and Wall
Panels
Specifier: Christianson O’Brien
Specifier: Loucas Zahos
Specifier: Edge ID
and Spotted Gum. Other species may be For further details on our acoustic tests
available upon request. Screenwood is contact Screenwood customer service.
PEFC certified. Internal systems include
the acoustic scrim fabric SC15 backing. VOC Emissions
All panels are pre-finished prior to Screenwood Internal Panel Systems
delivery and a wide range of finishes have been VOC tested in accordance
are available for internal and external with ASTM D5116 small chamber test. At
Panel Sizes applications. a result of <0.018mg/m2/hr, it exceeds
• Screenwood Ceiling and Wall Panels All of our internal coatings (excluding the GBCA requirements for commercial
are delivered to site pre-finished in Spotted Gum) are low VOC. fitouts.
modules 296mm wide and in lengths Please visit our website to see colours or
from 100mm–3600mm. request a sample at www.screenwood. PEFC and Environmental Certification
• Panels can be cut to specified lengths com.au Environmental considerations are a
with mitre cutting for bulkheads, cornerstone of design and production at
corner and edge trims, and delivered Lighting and Building Services Screenwood.
ready for installation as required. Screenwood Panels are suitable for use Screenwood is PEFC certified and
• For panel lengths longer than with many lighting options including is committed to using timber from
3600mm, Screenwood recommends down lights, strip lighting and pendant sustainably managed forests.
dividing the ceiling or wall in two lighting.
or more bays of panels with an Flush mounting or recessing of lighting Substrate Requirements and
expressed gap of 10mm between fixtures and incorporation of building Installation
panels. Screenwood recommends services such as electrical and sprinklers Screenwood Ceiling and Wall Panels are
avoiding butt joints. can be accommodated by trimming designed as a modular system:
• A shadowline perimeter gap of 20mm panels on site. • For ease of installation and reduction
is recommended where panels are in labour costs over installing the
placed within a coffer or adjacent to a Fire Rating blades individually.
wall. All Screenwood timber products have • Ideal for existing fitouts to refresh a
Screenwood Ceiling Panels can be used been rated a group 3 building material space or conceal building services.
within a coffer or suspended below in accordance with Specification C1.10 of • Can be easily removed for access to
the existing ceiling level. Screenwood’s the Building Code of Australia. Please services after construction.
concealed bracketing system (patent contact our customer service for further • Can be installed by any reputable
pending) is screwed to the ceiling information. builder, ceiling fixer or fitout company.
substrate or suspension system • The standard colour of the
creating a floating ceiling effect without Acoustic Rating Screenwood bracket is black. Using
exposed fixings. For floating ceilings, Screenwood Acoustic Systems are ideal colour matched black screws to
the acoustic lining does not need to be for new and existing fitouts to maximise install the panels further conceals the
included. sound absorption. Designed for use on installation fittings.
walls and ceilings, Screenwood Systems
Timbers, Coatings and Finishes provide high performance sound
Screenwood solutions are available in absorption in speech range and low
Western Red Cedar, Hoop Pine, Hemlock frequencies.
Typical Ceiling Installation Standard Panel Profiles
3020
Ceiling Panel installation to
suspended ceiling system with
SC15 acoustic scrim
Panels butt
together at
BLADE Width 17mm Depth 28mm Spacing 20mm
bracket
MODULE Width 296mm Depth 29mm Length up to 3.6m
3040 *
Panel
connection
to furring
channel End to End Detail BLADE Width 40mm Depth 28mm Spacing 19.2mm
MODULE Width 296mm Depth 29mm Length up to 3.6m
4012 *
10mm gap
recommended when
butt joining is required
BLADE Width 12mm Depth 38mm Spacing 17.6mm
MODULE Width 296mm Depth 39mm Length up to 3.6m
4020 *
Wall to Ceiling Detail Perimeter Detailing
Typical wall panel
to ceiling detail
(Screenwood
ceiling shown)
10mm Shadowline
Shadow gap 20mm
BLADE Width 17mm Depth 38mm Spacing 20mm
MODULE Width 296mm Depth 39mm Length up to 3.6m
SC15 standard black acoustic textile periodic dusting should keep the panels 6030
which can also conceal ceiling spaces. looking their best. Should the panels
Situations such as suspended ceilings require cleaning, we recommend wiping
where the textile is not required can the panels down with a clean damp
be accommodated. cloth. If the panels are subjected to
• If not using SC15 acoustic fabric, it is any moisture, please wipe them down
recommended that the substrate be immediately. Internal coatings should
painted black to give depth concealing not be wet down or hosed as this will
BLADE Width 29mm Depth 60mm Spacing 30.2mm
the substrate and brackets. negatively impact the coating. Oil MODULE Width 296mm Depth 61mm Length up to 3.6m