Escolar Documentos
Profissional Documentos
Cultura Documentos
EVOS® XL Core 1
Attachable Mechanical Stage Attachable Mechanical Stage
Installation Note Installation Note
Follow this procedure to attach the mechanical Follow this procedure to attach the mechanical
stage to the fixed stage. To remove the stage, do stage to the fixed stage. To remove the stage, do
the steps in reverse order. the steps in reverse order.
3. A
lign the mechanical stage so that the 3. A
lign the mechanical stage so that the
two screws under the mechanical stage two screws under the mechanical stage
align with two holes under the fixed 2 align with two holes under the fixed 2
stage.
4 stage.
4
4. Tighten the left screw by hand first. 4. Tighten the left screw by hand first.
5. Use the hex key to tighten the right screw 5. U
se the hex key to tighten the right screw
(behind the focus knob). Then fully tighten (behind the focus knob). Then fully tighten
the left screw with the hex key. the left screw with the hex key.
6. Stand the microscope upright. 1 6. Stand the microscope upright. 1
5 5
install Glass Stage Plate install Glass Stage Plate
1. Move the mechanical stage all the way 2 1. Move the mechanical stage all the way 2
back to expose the stage opening. 6 back to expose the stage opening. 6
2. Insert the glass stage plate (not shown) 2. Insert the glass stage plate (not shown)
into the stage opening. into the stage opening.
EVOS® XL Core EVOS® XL Core
Attachable Mechanical Stage Attachable Mechanical Stage
Installation Note Installation Note
® ®