Escolar Documentos
Profissional Documentos
Cultura Documentos
VERTICAL VESSEL
Note: The base shear and top load printed above have been modified
by the user defined Earthquake scalar.
Calculation Steps for Computing the design Base Shear (V) per
UBC 1997
The computed base shear is the minimum of V from 30-4 and 30-5.
this value !
V = 0.56 * Ca * I * W
V = 0.56 * 0.360 * 1.250 * 4429
V = 1116.4 Kgf
Next compute the top load per equation 30-14. The top load is
zero if the period of vibration (T) is less than 0.7 seconds.
Ft=0, as T=0.154s
Compute the load at each level based on equation 30-15 and multiply
by the load case scalar. The sum will be the total adjusted shear.
HORIZONTAL VESSEL
Calculation Steps for Computing the design Base Shear (V) per
UBC 1997
The computed base shear is the minimum of V from 30-4 and 30-5.
V = 2753262.2 Kgf
Compute the load at each level based on equation 30-15 and multiply
by the load case scalar. The sum will be the total adjusted shear.