Escolar Documentos
Profissional Documentos
Cultura Documentos
SkyEdge Pro
Tools Requied:
1 x PC or Laptop with Ethernet port
1 x Lan cable
Configure your PC with the following settings: (The default IP address of the
Skyedge is 192.168.1.1)
Connect your PC to PortA on the Skyedge Pro using the LAN cable
NB// Make sure that you have been given a VSAT ID by Pacific Teleports prior to configuring the Terminal.
SEB SWB
VSAT ID XXXX VSAT ID XXXX
Workgroup address: 256 Workgroup address: 257
Software group address: 512 Software group address: 513
Streamer PID: 515 Streamer PID: 516
Outbound ID: 5 Outbound ID: 6
Frequency: 1640175 Frequency: 1520175
Data Rate: 1424943 Data Rate: 1424943
Modulation: Advanced QPSK Modulation: Advanced QPSK
Coding Rate: ¾ Coding Rate: ¾
Turbo reduce latency: Minimum Turbo reduce latency: Minimum
Click on OK Click on OK
Click OK Click OK
Once the SkyEdge PRO has restarted, log back into the VSAT to check that your settings have been saved.