Escolar Documentos
Profissional Documentos
Cultura Documentos
SUPERARC® L-56®
Mild Steel, Copper Coated • AWS ER70S-6 & EH11K BUY AMERICA
Diameter 2 lb (1 kg) Plastic Spool 12.5 lb (5.7 kg) 33 lb (15 kg) 33 lb (15 kg) 44 lb (20 kg)
in (mm) 10 lb (4.5 kg) Master Carton Plastic Spool Plastic Spool Steel Spool Steel Spool
0.025 (0.6) ED030583 ED015790
0.030 (0.8) ED030631 ED023334 ED032926
0.035 (0.9) ED030632 ED028676 ED032927 ED031411 ED025945
0.045 (1.1) ED029042 ED032928 ED031412 ED025946
Diameter 44 lb (20 kg) 60 lb (27.2 kg) 60 lb (27.2 kg) 250 lb (113.4 kg)
in (mm) Fiber Spool Coil Fiber Spool Accu-Trak® Drum
0.030 (0.8)
0.035 (0.9) ED021274, ED033704* EDO21275 ED029914
0.040 (1.0) ED027384
0.045 (1.1) ED021276, ED033703*, ED033328** ED021277, ED036730* ED029915
0.052 (1.3) ED021278, ED033705* EDO21279 ED029916
1/16 (1.6) ED011666, ED033710*
Diameter 500 lb (227 kg) 500 lb (227 kg) 500 lb (227 kg) 1000 lb (454 kg)
in (mm) Accu-Trak® Drum Accu-Pak® Box Infinity-Pak Infinity-Pak
0.030 (0.8) ED030771
0.035 (0.9) ED021056 ED032904 EDO34394 ED036632
0.040 (1.0) ED031937
0.045 (1.1) ED020532, ED036219** ED032906, ED034248** ED036633
0.052 (1.3) ED020533 ED032907
1/16 (1.6) ED029225, ED033707*
Diameter 900 lb (408 kg) 1000 lb (454 kg) 1000 lb (454 kg) 1000 lb (454 kg)
in (mm) Accu-Pak® Box Accu-Trak® Drum Accu-Pak® Box Precise-Trak® Reel
0.035 (0.9) ED032847, ED034429* EDO28827 EDO33271
0.040 (1.0) EDO31032
0.045 (1.1) EDO28828 ED032849, ED033706* ED031616
0.052 (1.3) EDO29084 ED032850, ED033702* ED031617
1/16 (1.6) EDO29085 ED032851
CTWD (Contact Tip to Work Distance). Subtract 1/4 in (6.4 mm) to calculate Electrical Stickout. (6)Procedures in these areas are procedures for short circuiting mode using 100% CO2. When using 75% Argon, 25% CO2
(5)
T E S T RE S U LT S
Test results for mechanical properties, deposit or electrode composition and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed stan-
dards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld
procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding
consumable and procedure before use in the intended application.
CU S TO ME R AS S I S TA N CE P O LI CY
The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their
expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the best of their ability based on informa-
tion provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify the information provided or to evaluate the
engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume any liability with respect to such information or advice. Moreover, the provision
of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty
of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many
variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.