Escolar Documentos
Profissional Documentos
Cultura Documentos
MS No Year Accession No
ISO
MS 1 1996 MS 1:1996
MS 26 2009 MS 26-1-2:2009
MS 26 2009 MS 26-1-3:2009
MS 26 2009 MS 26-1-5:2009
MS 26 2009 MS 26-1-6:2009
MS 26 2009 MS 26-1-7:2009
MS 26 2009 MS 26-1-8:2009
MS 28 1985 MS 28:1985
MS 30 1995 MS 30-1:1995
MS 30 1995 MS 30-11:1995
MS 30 1995 MS 30-12:1995
MS 30 1995 MS 30-13:1995
MS 30 1995 MS 30-14:1995
MS 30 1995 MS 30-15:1995
MS 30 1995 MS 30-16:1995
MS 30 1995 MS 30-17:1995
MS 30 1995 MS 30-3:1995
MS 30 1995 MS 30-4:1995
MS 30 1995 MS 30-5:1995
MS 30 1995 MS 30-6:1995
MS 30 1995 MS 30-7:1995
MS 30 1995 MS 30-8:1995
MS 30 1995 MS 30-9:1995
MS 45 2009 MS 45:2009
MS 66 1999 MS 66-1:1999
MS 66 1999 MS 66-2:1999
MS 68 1991 MS 68:1991
MS 69 1995 MS 69:1995
MS 7 1971 MS 7:1971
MS 704 1981 MS 704 : 1981
MS 704 2005 MS 704 : 2005
MS 705 1981 MS 705 : 1981
MS 706 1981 MS 706 : 1981
MS 708 1981 MS 708 : 1981
MS 709 1981 MS 709 : 1981
MS 71 1972 MS 71:1972
MS 712 1981 MS 712 : 1981
MS 73 1972 MS 73:1972
Specification for protective helmets for vehicle users (second revision) Malaysian Standard RACK 1
Specification for rigid poly (vinyl chloride) and related plastic pipe and fitting
Malaysian Standard RACK 1
compounds
Aluminium framed sliding glass doors - specification (First revision) Malaysian Standard RACK 1
Specification for aluminium framed sliding glass doors Part 1: Single glazed
Malaysian Standard RACK 1
doors
Specification for mineral fibre thermal insulation material Malaysian Standard RACK 1
Guide for construction of electrical equipment for protection against electrical
Malaysian Standard RACK 1
shock
Specification for stopvalves for water services (Screwdown pattern) Malaysian Standard RACK 1
Specification for identification of the contents of industrial gas containers Malaysian Standard RACK 1
Unplasticised polyvinyl chloride (PVC-U) conduit for underground
Malaysian Standard RACK 1
telecommunication cables - specification (First revision)
Code of practice for unplasticized PVC pipework for the conveyance of liquid
Malaysian Standard RACK 1
under pressure
Specification for sulphate-resisting Portland cement Malaysian Standard RACK 1
Specification for alternating current switches of rated voltage above one
Malaysian Standard RACK 1
kilovolt
Code of practice for safety in laboratories Part 1: General Malaysian Standard RACK 1
Code of practice for safety in laboratories Part 2: Chemical Malaysian Standard RACK 1
Code of practice for safety in laboratories Part 3: Microbiology Malaysian Standard RACK 1
Code of practice for safety in laboratories Part 4: Ionizing radiations Malaysian Standard RACK 1
Code of practice for safety in laboratories Part 6: Mechanical aspects Malaysian Standard RACK 1
Methods of measuring drying shrinkage of mortar containing hydraulic cement Malaysian Standard RACK 1
Soils for civil engineering purposes - test method - Part 6: Consolidation and
Malaysian Standard RACK 1
permeability tests in hydraulic cells and with pore pressure measurement
Soils for civil engineering purposes - test method - Part 8: Shear strength tests
Malaysian Standard RACK 1
(effective stress)
Specification for adjustable louvre windows (First revision) Malaysian Standard RACK 1
Specification for polyethylene (PE) piping systems for water supply: Part 1:
Malaysian Standard RACK 1
General (Third revision)
Specification for polyethylene (PE) piping systems for water supply: Part 2:
Malaysian Standard RACK 1
Pipes (Third revision)
Specification for asbestos - cement sewer pipes, joints and fittings Malaysian Standard RACK 1
Specification for mortice locks for use in buildings Malaysian Standard RACK 1
Vitrified clay pipes and fittings and pipe joints for drains and sewers : Part 1:
Malaysian Standard RACK 1
Requirements (First revision)
Vitrified clay pipes and fittings and pipe joints for drains and sewers : Part 2:
Malaysian Standard RACK 1
Quality control and sampling
Vitrified clay pipes and fittings and pipe joints for drains and sewers : Part 3:
Malaysian Standard RACK 1
Test methods
Specification for bored locks and latches for building Malaysian Standard RACK 1
Guide to modular coordination in buildings: Part 1: General principles (First
Malaysian Standard RACK 1
revision)
Guide to modular coordination in buildings: Part 10: Coordinating sizes and
Malaysian Standard RACK 1
preferred sizes for reinforced concrete components
Guide to modular coordination in buildings: Part 2: Storey heights and room
Malaysian Standard RACK 1
heights (First revision)
Guide to modular coordination in buildings: Part 4: Coordinating sizes and
Malaysian Standard RACK 1
preferred sized for doorsets (First revision)
Guide to modular coordination in buildings: Part 5: Coordinating sizes and
Malaysian Standard RACK 1
preferred sizes for windowsets
Guide to modular coordination in buildings: Part 6: Coordinating sizes and
Malaysian Standard RACK 1
preferred sizes for rigid flat sheets (First revision)
Guide to modular coordination in buildings: Part 7: Coordinating sizes and
Malaysian Standard RACK 1
preferred sizes for tiles
Guide to modular coordination in buildings: Part 8: Coordinating sizes and
Malaysian Standard RACK 1
preferred sizes for masonry bricks and blocks
Guide to modular coordination in buildings: Part 9: Coordinating sizes and
Malaysian Standard RACK 1
preferred sizes for cabinets
Plastics containers for pharmaceutical use - other than parenteral and
Malaysian Standard RACK 1
ophthalmic preparations - specification (First revision)
Code of practice for the exchange of digital feature coded mapping data Malaysian Standard RACK 1
Code of practice for the installation of buried unplasticised PVC pipework for
Malaysian Standard RACK 1
gravity sewers
Code of practice for laying and field pressure testing of asbestos cement
Malaysian Standard RACK 1
pipelines
Specification for extruded ceramic floor tiles Malaysian Standard RACK 1
Methods of test for ceramic tiles Part 3: Determination of modulus of rupture Malaysian Standard RACK 1
Recharging fire extinguishers Part 1: Specification for procedure and materials Malaysian Standard RACK 1
Code of practice for structural use of concrete Part 1: Design and construction Malaysian Standard RACK 1
Code of practice for structural use of concrete Part 2: Special circumstances Malaysian Standard RACK 1
Code of practice for structural use of concrete Part 3: Design charts for singly
Malaysian Standard RACK 1
reinforced beams, doubly reinforced beams and rectangular columns
Specification for information processing - Programming languages - Minimal
Malaysian Standard RACK 1
basic
Specification for current transformers Malaysian Standard RACK 1
Specification for brushcutters - Safety requirements Malaysian Standard RACK 1
Specification for qualification for welders - fusion welding Part 1: Steels Malaysian Standard RACK 1
Methods for test for the determination of exhaust carbon monoxide at idle speed
Malaysian Standard RACK 1
for motor vehicles
Method of test for the determination of the burning behaviour of interior
Malaysian Standard RACK 1
materials of motor vehicles
Method of test for the measurement of noise emitted by accelerating motor
Malaysian Standard RACK 1
vehicles - engineering method
Method for test for the measurement of noise emitted by stationary motor
Malaysian Standard RACK 1
vehicles
Precast concrete piles - Part 7: Installation of precast concrete piles -
Malaysian Standard RACK 1
requirements
Specification for retroflective sign face materials Malaysian Standard RACK 1
Safety of household and similar electrical appliances: Part 2: Particular
Malaysian Standard RACK 1
requirements for fans (First revision)
Performance and construction of electric circulating fans and regulators (First
Malaysian Standard RACK 1
revision) (IEC 60879: 1986, MOD)
Specification for fibre cement symmetrically corrugated sheet and fittings Malaysian Standard RACK 1
Specification for cold water storage and feed and expansion cisterns (polyolefin
Malaysian Standard RACK 1
or olefin copolymer) and cistern lids
Pulverized-fuel ash Part 1. Specification for pulverized-fuel ash for use as a
Malaysian Standard RACK 1
cementitious component in structural concrete
Specification for portland pulverised fuel ash cement (First revision) Malaysian Standard RACK 1
Specification for general purpose galvanized steel wire strand Malaysian Standard RACK 1
Specification for galvanized steel wire for aluminium conductors, steel-
Malaysian Standard RACK 1
reinforced
Specification for galvanized low carbon steel wire for armouring cables Malaysian Standard RACK 1
Specification for galvanized steel wire for armouring submarine cables Malaysian Standard RACK 1
Specification for fibreglass water tanks effective capacity of less than 2000
Malaysian Standard RACK 1
litres
Malaysian Standard guide to assessment of concrete strength in existing
Malaysian Standard RACK 1
structures
Assessment of in-situ compressive strength in structures and precast concrete
components - complimentary guidance to that given in MS EN 13791 (First Malaysian Standard RACK 1
revision)
Technical specifications for carbon monoxide analyser equipment for motor
Malaysian Standard RACK 1
vehicles
Guidelines for irradiation of foods Part 1: General Malaysian Standard RACK 1
Guidelines for irradiation of foods Part 2: Irradiation of bulb and tuber crops to
Malaysian Standard RACK 1
inhibit sprouting
Guidelines for irradiation of foods Part 1: Irradiation of fresh fruits for insect
Malaysian Standard RACK 1
disinfestation (as a quarantine treatment)
Guidelines for irradiation of foods Part 4: Irradiation of cereal grans for insect
Malaysian Standard RACK 1
disinfestation
Guidelines for irradiation of foods Part 5: Irradiation of dried fish and dried
Malaysian Standard RACK 1
salted fish for insect disinfectation
Guidelines for irradiation of foods Part 6: Irradiation of bananas, mangoes and
Malaysian Standard RACK 1
papayas for shelf life extension (by delay of ripening)
Guidelines for irradiation of foods Part 7: Irradiation of fresh fish and shrimps
stored under refrigeration and for frozen frog legs and shrimps (to control Malaysian Standard RACK 1
microflora)
Guidelines for irradiation of foods Part 8: Irradiation of fresh and frozen red
Malaysian Standard RACK 1
meats and poultry (to control pathogens)
Method of test for flexible cellular materials - combustibility requirements: Part
1: methods of test for the ignitability by smokers' materials of upholstered Malaysian Standard RACK 1
composites for seating
Information processing - guidelines for the documentation of computers based
Malaysian Standard RACK 1
application systems
Information processing systems user documentation and cover information for
Malaysian Standard RACK 1
consumer software packages
Specification for rubber seals - water stops for sealing joints in concrete -
Malaysian Standard RACK 1
specification of materials
Specification for precast reinforced concrete box culverts Part 1: Small culverts
(not exceeding 1800 mm width and 1800 mm depth with a maximum backfill Malaysian Standard RACK 1
depth of 2 m inclusive pavement, if any)
Wall and floor tiling Part 1: Code of practice for the design and installation of
Malaysian Standard RACK 1
internal ceramic wall tiling and mosaics in normal conditions
Wall and floor tiling Part 2: Code of practice for the design and installation of
Malaysian Standard RACK 1
external ceramic wall tiling and mosaics (including terra cotta and faience slabs
Wall and floor tiling Part 3: Code of practice for the design and installation of
Malaysian Standard RACK 1
ceramic floor and mosaics
Wall and floor tiling Part 4: Code of practice for tiling and mosaics in specific
Malaysian Standard RACK 1
conditions
Specification for fibre cement flat sheets Malaysian Standard RACK 1
Specification for fire and burglary resistant office safes Malaysian Standard RACK 1
Code of practice on large prefabricated panels Malaysian Standard RACK 1
Specification for PVC-insulted cables for switchgear and control gear wiring Malaysian Standard RACK 1
Specification for PVC insulation and sheath of electric cables (second revision) Malaysian Standard RACK 1
Specification for Acrtlonitrile Butadiene Styrene (ABS) pipes and fittings for
Malaysian Standard RACK 1
pressure applications Part 4: Guides for installation of ABS pipe systems
Specification for precautions with respect to possible hazards when dealing with
Malaysian Standard RACK 1
electronic equipment and equipment employing similar techniques
Specification for general purpose fude links for domestic and similar purposes
Malaysian Standard RACK 1
(primarily for use in plugs)
Steel wire for reinforcement of concrete products - specification (Fourth
Malaysian Standard RACK 1
revision)
Low voltage switchgear and controlgear assemblies : Part 1: Type-tested and
Malaysian Standard RACK 1
partially type-tested assemblies
Low voltage switchgear and controlgear assemblies : Part 1: Particular
requirements for low voltage switchgear and controlgear assemblies intended to
Malaysian Standard RACK 1
be installaed in places where unskilled persons have access for their use -
distribution boards
Specification for fixed firefighting systems - Hose reels with semi-rigid hose Malaysian Standard RACK 1
Fixed firefighting systems - Hose systems Part 1: Hose reels with semi-rigid
Malaysian Standard RACK 1
hose
Fixed firefighting systems - Hose systems Part 2: Hose systems with lay-flat
Malaysian Standard RACK 1
hose
Steel fabric for the reinforcement of concrete - specification (Fourth revision) Malaysian Standard RACK 1
Hot rolled steel bars for the reinforcement of concrete - specification (Third
Malaysian Standard RACK 1
revision)
Steel for the reinforcement of concrete - weldable reinforcing steel - bar, coil
Malaysian Standard RACK 1
and decoiled product - specification (Fourth revision)
Code of practice on resistibility of telecommunication equipment to
Malaysian Standard RACK 1
overvoltages and overcurrents
Specification for draw off taps with metal bodies for water services Malaysian Standard RACK 1
Metal scaffolding Part 1: Prefabricated scaffolds - Specification for steel frame
Malaysian Standard RACK 1
scaffolding (First revision)
Metal scaffolding Part 2: Tubular (tube and coupler) scaffolds Section 1:
Malaysian Standard RACK 1
Specification for steel tubes
Metal scaffolding Part 2: Tubular (Tube and Coupler) scaffolds - Section 2:
Malaysian Standard RACK 1
Specification for aluminium tubes
Metal scaffolding Part 2: Tubular (Tube and Coupler) scaffolds - Section 2:
Malaysian Standard RACK 1
Specification for aluminium tubes
Metal scaffolding Part 3: Prefabricated scaffolds - Section 1: Specification for
Malaysian Standard RACK 1
steel and aluminium modular system scaffolding
Metal scaffolding Part 3: Prefabricated scaffoldings - Section 2: Particular
methods of structural design for steel and aluminium modular system Malaysian Standard RACK 1
scaffoldings
Metal scaffolding Part 4: Temporary works equipement - Section 1: Scaffolds -
Malaysian Standard RACK 1
performance requirements and general design
Metal scaffolding Part 4: Temporary works equipment - Section 2: Information
Malaysian Standard RACK 1
on materials
Vocabulary on Gas Cylinder Malaysian Standard RACK 1
Specification for quality of vitreous China sanitary appliances (First revision) Malaysian Standard RACK 1
Vocabulary on Fire Protection Part 1: General terms and phenomena of fire Malaysian Standard RACK 1
Vocabulary on Fire Protection Part 2: Structural fire protection Malaysian Standard RACK 1
Vocabulary on Fire Protection Part 3: Fire detection and alarm Malaysian Standard RACK 1
Vocabulary on Fire Protection Part 4: Fire extinction equipment Malaysian Standard Rack 1
Vocabulary on Fire Protection Part 5: Smoke control Malaysian Standard RACK 1
Vocabulary on Fire Protection Part 6: Evacuation and means of escape Malaysian Standard RACK 1
Vocabulary on Fire Protection Part 7: Explosion detection and surpression
Malaysian Standard RACK 1
means
Vocabulary on Fire Protection Part 8: Terms specific to fire fighing rescue
Malaysian Standard RACK 1
services and handling hazardous materials
Cylinder for permanent gases - Inspection at time of filling (ISO 10463: 1993,
Malaysian Standard RACK 1
IDT)
Cylinder for liquefied gases (exclusing acetylene and LPG) - Inspection at time
Malaysian Standard RACK 1
of filling (ISO 11113: 1995, IDT)
Plastics - Polyethylene film and sheeting - Specification (First Revision) Malaysian Standard RACK 1
Plastics - Low density polyethylene films for general use and packaging
Malaysian Standard RACK 1
applications - Specification (First revision)
Multiple payment order message (paymul) for the payment of customs duty
Malaysian Standard RACK 1
(First revision)
Banking status message (BANSTA) for the payment of customs duty (First
Malaysian Standard RACK 1
revision)
Multiple credit advice message (cremul) for the payment of customs duty (First
Malaysian Standard RACK 1
revision)
Multiple debit advice message (debmul) for the payment of customs duty (First
Malaysian Standard RACK 1
revision)
International Movement of Goods Governmental Regulatory (SANCRT) by the
Malaysian Standard RACK 1
Customs (First Revision)
Vocabulary on United Nations Standards Message (UNSM) (First Revision) Malaysian Standard RACK 1
Portable fire extinguishers - Part 5: Fire extinguisher for use on class F fires Malaysian Standard RACK 1
Fire detection and fire alarm systems - Part 5: Heat detector - point detectors Malaysian Standard RACK 1
Air quality - determination of odour concentration by dynamic olfactometry Malaysian Standard RACK 1
Guidelines for developing and implementing early action for site remediation Malaysian Standard RACK 1
Data on shielding from ionizing radiation Part 2: Shielding from X-radiation Malaysian Standard RACK 1
Method for the hydrostatic stretch testing of liquefiable and other compressed
Malaysian Standard RACK 1
gas cylinders
Specification for ISO metric screw threads (First revision) Malaysian Standard RACK 1
Electromagnetic compatibility - Environment - Overvoltages on public eletricity
Malaysian Standard RACK 1
distribution networks
Guidelines for limiting exposure to time-varyinng electric, magnetic and
Malaysian Standard RACK 1
electromagnetic fields - Part 1: For frequency up to 3kHz
Speed hump - specification for materials, design and installation Malaysian Standard RACK 1
Specification for deformed and plain carbon-steel bars for concrete
Malaysian Standard RACK 1
reinforcement
Welding and allied processes - vocabulary- Part 1: Metal welding processes
Malaysian Standard RACK 1
(ISO 857-1: 1998, MOD)
Performance standards in building - definition and calculation of area and space
Malaysian Standard RACK 1
indicators (ISO 9836: 1992, MOD)
Aggregates for mortar: specification Malaysian Standard RACK 1
Masonry units - Specification - Part 2: Calcium silicate masonry units Malaysian Standard RACK 1
Plastics piping systems for hot and cold water installations - polypropylene (PP)
Malaysian Standard RACK 1
- Part 1: General (ISO 15874-1: 2003, AMD. 1: 2007, MOD)
Plastics piping systems for hot and cold water installations - polypropylene (PP)
Malaysian Standard RACK 1
- Part 2: Pipes (ISO 15874-1: 2003, AMD. 1: 2007, MOD)
Plastics piping systems for hot and cold water installations - polypropylene (PP)
Malaysian Standard RACK 1
- Part 3: Fittings (ISO 15874-3: 2003, MOD)
Plastics piping systems for hot and cold water installations - polypropylene (PP)
Malaysian Standard RACK 1
- Part 7: Guidance for the assessment of conformity
Aluminium an aluminium allay - extruded shapes Malaysian Standard RACK 1
Nomenclature and uses of commercial timbers of Malaysia (First revision) Malaysian Standard RACK 1
Rolles carbon steel for cold - finished steel bars Malaysian Standard RACK 1
Demolition of buildings - code of practice (First revision) Malaysian Standard RACK 1
Demolition of buildings - code of practice (First revision) Malaysian Standard RACK 1
Wire rods for core wire of covered electrode Malaysian Standard RACK 1
Fluids for electrotechnical applications - unused mineral insulating oils for
Malaysian Standard RACK 1
transformers and switchgear
Method of specifying thermoplastics injection mouldings - Part 1: General
Malaysian Standard RACK 1
requirements
Performance rating of water-chilling packages using vapor compression cycle Malaysian Standard RACK 1
Guidelines for disposal of laboratory chemical wastes (LCW) Malaysian Standard RACK 1
Traffic control equipment - performance of signal heads Malaysian Standard RACK 1
Oil tempered wire - Part 1: Mechanical springs Malaysian Standard RACK 1
Oil tempered wire - Part 1: Valve springs Malaysian Standard RACK 1
Hard drawn steel wires - Part 1: Principally for static load Malaysian Standard RACK 1
Hard drawn steel wires - Part 2: Principally for dynamic load Malaysian Standard RACK 1
Plastic piping systems for hot and cold water installations - Polyethylene of
raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009, Malaysian Standard RACK 1
MOD)
Plastic piping systems for hot and cold water installations - Polyethylene of
raised temperature resistance (PE-RT) - Part 1: Pipes (ISO 22391-2:2009, Malaysian Standard RACK 1
MOD)
Plastic piping systems for hot and cold water installations - Polyethylene of
raised temperature resistance (PE-RT) - Part 1: Fittings (ISO 22391-3:2009, Malaysian Standard RACK 1
MOD)
Plastic piping systems for hot and cold water installations - Polyethylene of
raised temperature resistance (PE-RT) - Part 7: Guidance for the assesment of Malaysian Standard RACK 1
conformity (ISO/TS 22391-7:2011, MOD)
Urban stormwater management - Part 1: Design acceptance criteria Malaysian Standard RACK 1
Urban stormwater management - Part 10: Gross pollutant traps Malaysian Standard RACK 1
Urban stormwater management - Part 11: Water quality ponds and wetlands Malaysian Standard RACK 1
Urban stormwater management - Part 12: Erosion and sediment control Malaysian Standard RACK 1
Urban stormwater management - Part 2: Quantity design fundamentals Malaysian Standard RACK 1
Urban stormwater management - Part 3: Quantity design fundamentals Malaysian Standard RACK 1
Urban stormwater management - Part 4: Roof and property drainage Malaysian Standard RACK 1
Urban stormwater management - Part 5: On site detention Malaysian Standard RACK 1
Urban stormwater management - Part 6: Rainwater harvesting Malaysian Standard RACK 1
Urban stormwater management - Part 7: Detention ponds Malaysian Standard RACK 1
Plastic piping system for non pressure underground drainage and sewerage -
Structured wall piping systems of unplasticised poly (vinyl chloride) (PVC-U), Malaysian Standard RACK 1
polypropylene (PP) and polyethylene (PE) Part 1: Dimensions
Plastic piping system for non pressure underground drainage and sewerage -
Structured wall piping systems of unplasticised poly (vinyl chloride) (PVC-U),
Malaysian Standard RACK 1
polypropylene (PP) and polyethylene (PE) Part 1: Technical delivery
specifications
Safety and health signage used in the workplace - Specification (First revision) Malaysian Standard RACK 1
Moulded expended perlite block and pipe thermal insulation - specification Malaysian Standard RACK 1
Architecture and asset management of masjid - code of practice Malaysian Standard RACK 1
Code of practice on energy efficiency and conservation for industrial electrical
Malaysian Standard RACK 1
equipment - Part 1: Fans
Code of practice on energy efficiency and conservation for industrial electrical
Malaysian Standard RACK 1
equipment - Part 3: Motors
Production of biogas - code of practice Malaysian Standard RACK 1
Smoke and heat control systems - Part 10: Power supplies Malaysian Standard RACK 1
Smoke and heat control systems - Part 7: Smoke duct sections Malaysian Standard RACK 1
Bead wire - specification Malaysian Standard RACK 1
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 1:
Malaysian Standard RACK 1
Specification (First revision)
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 2:
Malaysian Standard RACK 1
Test methods (First revision)
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 3:
Malaysian Standard RACK 1
Installation for roof covering (First revision)
Methods of testing concrete Part 2 : Methods of testing hardened concrete (First
Malaysian Standard RACK 1
revision)
Compressed air work in tunnelling - code of practice Malaysian Standard RACK 1
Testing of concrete - Part 1: Fresh concrete - Section 2: Slump test (Second
Malaysian Standard RACK 1
revision)
Testing of concrete - Part 1: Fresh concrete - Section 3: Vebe test (Second
Malaysian Standard RACK 1
revision)
Testing of concrete - Part 1: Fresh concrete - Section 5: Flow table test (Second
Malaysian Standard RACK 1
revision)
Testing of concrete - Part 1: Fresh concrete - Section 6: Density (Second
Malaysian Standard RACK 1
revision)
Testing of concrete - Part 1: Fresh concrete - Section 7: Air content - Pressure
Malaysian Standard RACK 1
methods (Second revision)
Testing of concrete - Part 1: Fresh concrete - Section 8: Compacting factor test
Malaysian Standard RACK 1
(second revision)
Specification for PVC-insulted cables for electricity supply Malaysian Standard RACK 1
Specification for steel conduits & fittings with metric threads of ISO form for
electrical installations Part 1: Steel conduits, bends & couplers (internationally Malaysian Standard RACK 1
acceptable sizes)
Specification for steel conduits & fittings with metric threads of ISO form for
electrical installations Part 2: Fittings and components (non-internationally Malaysian Standard RACK 1
acceptable sizes)
Specification for rubber insulation and sheath of electric cables (First revision) Malaysian Standard RACK 1
Methods of testing aggregates Part 17: Methods for determination of soundness Malaysian Standard RACK 1
Methods of testing aggregates Part 3: Methods for sampling (First revision) Malaysian Standard RACK 1
Lead-acid starter batteries for automobiles - specification (Second revision) Malaysian Standard RACK 1
Code of practice for guarding and safe use of metal working power presses Malaysian Standard RACK 1
Code of practice for guarding and safe use of woodworking machinery Malaysian Standard RACK 1
Specification for water for laboratory use Malaysian Standard RACK 1
Specification for covered carbon steel arc welding electrodes (First revision) Malaysian Standard RACK 1
Specification for carbon steel electrodes and roads for use with gas shielded arc
Malaysian Standard RACK 1
welding (First revision)
Specification for general purpose transmission precision roller chains and
Malaysian Standard RACK 1
chainwheels (First revision)
Specification for portland cement (ordinary and rapid-hardening) Part 1:
Malaysian Standard RACK 1
standard specification (First revision)
Specification for portland cement (ordinary and rapid-hardening) Part 2:
Malaysian Standard RACK 1
physical tests (First revision)
Specification for portland cement (ordinary and rapid-hardening) Part 3:
Malaysian Standard RACK 1
Chemical analysis (First revision)
Concrete - Part 1: Specification, performance, production and conformity
Malaysian Standard RACK 1
(Second revision)
Concrete - Part 2: Method of specifying and guidance for the specifier (Second
Malaysian Standard RACK 1
revision)
Concrete - Part 3: Specification for constituent materials and concrete (Second
Malaysian Standard RACK 1
revision)
Specification for asbestos cement symmetrically corrugated sheets (First
Malaysian Standard RACK 1
revision)
Specification for concrete porous pipes for under drainage (First revision) Malaysian Standard RACK 1
Code of practice for structural use of timber: Part 11: Recommended span tables
Malaysian Standard RACK 1
and their calculations: Section 1: Domestic floor joists
Code of practice for structural use of timber: Part 11: Recommended span tables
Malaysian Standard RACK 1
and their calculations: Section 2: Ceiling joists
Code of practice for structural use of timber: Part 11: Recommended span tables
Malaysian Standard RACK 1
and their calculations: Section 3: Ceiling binders
Code of practice for structural use of timber :Part 2: Permissible stress design of
Malaysian Standard RACK 1
solid timber (First revision)
Code of practice for structural use of timber :Part 3: Permissible stress design of
Malaysian Standard RACK 1
glued laminated timber (First revision)
Code of practice for structural use of timber: Part 4: Timber panel products:
Malaysian Standard RACK 1
Section 1: Structural plywood
Code of practice for structural use of timber: Part 4: Timber panel products:
Malaysian Standard RACK 1
Section 2: Marine plywood
Code of practice for structural use of timber: Part 4: Timber panel products:
Malaysian Standard RACK 1
Section 3: Cement bonded particleboard (CBP)
Code of practice for structural use of timber: Part 4: Timber panel products:
Malaysian Standard RACK 1
Section 1: Oriented strand board (OSB)
Code of practice for structural use of timber: Part 5: Timber joints Malaysian Standard RACK 1
Code of practice for structural use of timber: Part 7: Testing (First revision) Malaysian Standard RACK 1
Code of practice for structural use of timber: Part 9: Fire resistance of timber
Malaysian Standard RACK 1
structures: Section 1: Method of calculating fire resistance of timber members
Specification for 13A plugs, socket-outlets, adaptors and connection units Part
Malaysian Standard RACK 1
2: Specification for 13A switched and unswitched socket - outlet (First revision)
Specification for 13A plugs, socket-outlets, adaptors and connection units Part
Malaysian Standard RACK 1
1: Specification for adaptors (First revision)
Specification for low voltage air break switches, air break disconnectors, air
Malaysian Standard RACK 1
break switch disconnectors and fuse combination units
Nomenclature for pistons for internal combustion engines Malaysian Standard RACK 1
Specification for performance requirements of hot-forged rivets Malaysian Standard RACK 1
Instrument transformers - Part 1: Current transformers (First revision) (IEC
Malaysian Standard RACK 1
60044-1: 2003, MOD)
Direct acting indicating analogue electrical measuring instruments and their
accessories - Part 1: Definitions and general requirements common to all parts Malaysian Standard RACK 1
(First revision) (IEC 60051-1: 1997, MOD)
Insulation co-ordination - Part 4: Computational guide to insulation co-
Malaysian Standard RACK 1
ordinational and modelling of electrical networks
Insulation co-ordination - Part 5: Procedures for high-voltage direct current
Malaysian Standard RACK 1
(HVDC) converter stations (IEC/TS 60071-5: 2002, MOD)
Power transformers - Part 11: Dry- type transformers (IEC 60076-11: 2004,
Malaysian Standard RACK 1
MOD)
Power transformers - Part 7: Loading guide for oil -immersed power
Malaysian Standard RACK 1
transformers (First revision) (IEC 60076-7: 2005, MOD)
Code of practice for interior lighting Malaysian Standard RACK 1
Oil-filled electrical equipment - sampling of gases and oil for analysis of free
Malaysian Standard RACK 1
and dissolved gases - Guidance (IEC 60567:2005, MOD)
Electricity metering equipment - Dependability - Part 11: General concepts Malaysian Standard RACK 1
Recommendation for small renewable energy and hybrid systems for rural
Malaysian Standard RACK 1
electrification - Part 1: General introduction to rural electrification
Recommendation for small renewable energy and hybrid systems for rural
Malaysian Standard RACK 1
electrification - Part 2: From requirements to a range of electrification systems
Recommendation for small renewable energy and hybrid systems for rural
Malaysian Standard RACK 1
electrification - Part 3: Project development and management
Recommendation for small renewable energy and hybrid systems for rural
Malaysian Standard RACK 1
electrification - Part 4: System selection and design
Specification for semi-compressed asbestos cement flat sheets Malaysian Standard RACK 1
Power systems management and associated information exchange - Data and
communications security - Part 3: Communication network and system security Malaysian Standard RACK 1
- Profiles including TCP/IP (IEC 62351-3: 2007, MOD)
Power systems management and associated information exchange - Data and
Malaysian Standard RACK 1
communications security - Part 4: Profiles including MMS
Power systems management and associated information exchange - Data and
Malaysian Standard RACK 1
communications security - Part 6: Security for IEC 61850
Photobiological safety of lamps and lamp systems - Part 2: Guidance on
Malaysian Standard RACK 1
manufacturing requirements relating to non laser optical radiation safety
General lighting - LEDs and LED modules - Terms and definitions Malaysian Standard RACK 1
Luminaire performance - Part 1: General requirements Malaysian Standard RACK 1
Luminaire performance - Part 2-1: Particular requirements for LED luminaires Malaysian Standard RACK 1
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 1:
Malaysian Standard RACK 1
Pipes (First revision)
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 2:
Joints and fittings for use with unplasticised PVC pipes: Section 2.1: uPVC Malaysian Standard RACK 1
joints and fittings
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 2:
Joints and fittings for use with unplasticised PVC pipes: Section 2.2: Solvent Malaysian Standard RACK 1
cement
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 3:
Malaysian Standard RACK 1
Guide for installation
Specification for primary cells and batteries: Part 1: General (Second revision) Malaysian Standard RACK 1
Specification for primary cells and batteries: Part 2: Specification sheets Malaysian Standard RACK 1
Specification for containers for lead-acid batteries (First revision) Malaysian Standard RACK 1
Specification for conductors in insulated cables and cords (Second revision) Malaysian Standard RACK 1
Specification for tungsten filament electric lamp for general service Malaysian Standard RACK 1
Specification for hacksaw blades Malaysian Standard RACK 1
Hacksaw blades - specification (First revision) Malaysian Standard RACK 1
Specification for hand hammers Malaysian Standard RACK 1
Specification for cold chisels Malaysian Standard RACK 1
Specification for grey iron pipes and fittings Malaysian Standard RACK 1
Specification for cast iron non-pressure pipes and fittings Malaysian Standard RACK 1
Specification for radio interference limits for electrical appliances Malaysian Standard RACK 1
Specification for asbestos cement pressure pipes Malaysian Standard RACK 1
Specification for radio interference measuring set for the frequency range 0.015
Malaysian Standard RACK 1
MHz to 1000 MHz
Plastics feeding bottles : specification (Second revision) Malaysian Standard RACK 1
Specification for terrazzo floor tiles Malaysian Standard RACK 1
Specification for stranded wire ropes - technical delivery requirements Malaysian Standard RACK 1
Specification for unplasticised PVC pipe for industrial use Malaysian Standard RACK 1
Specification for preferred number series for resistance and capacitors Malaysian Standard RACK 1
Specification for fixed resistors Part 1: Terms and methods of test Malaysian Standard RACK 1
Standard for fixed resistors Part 3: Wirewound resistors Type 1: Selection of
Malaysian Standard RACK 1
methods of test and general requirements
Recommendation for characteristic impedances and dimensions of radio-
Malaysian Standard RACK 1
frequency coaxial cable
Low-frequency communication cables and wires with PVC insulation and PVC
Malaysian Standard RACK 1
sheath : Part 1: General tests and measuring methods
Standard for marking codes for resistors and capacitors Malaysian Standard RACK 1
General rules for power transformers (not exceeding 1KVA rating) for
Malaysian Standard RACK 1
electronic - equipment
Specification for bayonet lamp-caps lampholders and B.C. adaptors
Malaysian Standard RACK 1
(lampholder - plugs)
Specification for ceiling roses Malaysian Standard RACK 1
Industrial V-belts Malaysian Standard RACK 1
Specification for typewriter ribbon, nylon Malaysian Standard RACK 1
Specification for typewriter ribbon, cotton Malaysian Standard RACK 1
Specification for masonry cement Malaysian Standard RACK 1
Masonry cement - specification (First revision) Malaysian Standard RACK 1
Specification for WC flushing cisterns and flush pipes (First revision) Malaysian Standard RACK 1
WC Flushing cisterns - Part 1: Specification (Second revision) Malaysian Standard RACK 1
WC Flushing cisterns - Part 2: Inlet Valves (Second revision) Malaysian Standard RACK 1
WC Flushing cisterns - Part 3: Flushing device (Second revision) Malaysian Standard RACK 1
Specification for small wire ropes Malaysian Standard RACK 1
Code of practice for methods of defining, recording and assessing work injuries Malaysian Standard RACK 1
Specification for precast concrete pipes and fittings for drainage and sewerage
Malaysian Standard RACK 1
Part 1: Specification for pipes and fittings with flexible joints and manholes
Specification for precast concrete pipes and fittings for drainage and sewerage
Malaysian Standard RACK 1
Part 2: Specification for inspection chambers and street gullies
Specification for precast concrete pipes and fittings for drainage and sewerage
Malaysian Standard RACK 1
Part 3: Specification for pipes and fittings with ogee joints
Specification for spike-proof combat boots Malaysian Standard RACK 1
Specification for white Portland cement (First revision) Malaysian Standard RACK 1
Specification for concrete admixtures Part 1: Accelerating admixtures, retarding
Malaysian Standard RACK 1
admixtures and water-reducing admixtures
Specification for direct acting indication electrical measuring instruments and
Malaysian Standard RACK 1
their accessories
Code of practice for the installation of fuel gas piping systems and appliances
Malaysian Standard RACK 1
(First revision)
Code of practice for loading guide for oil-immersed transformers Malaysian Standard RACK 1
Specification for classification of materials for the insulation of electrical
Malaysian Standard RACK 1
machinery and apparatus in relation to their thermal stability in service
Specification for classification of degrees of protection provided by enclosures Malaysian Standard RACK 1
Specification for KELUAR signs (Internally illuminated) (Second revision) Malaysian Standard RACK 1
Specification for water for lead acid batteries Malaysian Standard RACK 1
Mixing water for concrete - specification for sampling, testing and assessing the
suitability of water, including water recovered from processes in the concrete Malaysian Standard RACK 1
industry, as mixing water for concrete (Second revision)
Admixtures for concrete, mortar and grout - Part 3: Admixtures for monsonry
mortar - Definitions, requirements, conformity, marking and labelling (First Malaysian Standard RACK 1
revision)
Admixtures for concrete, mortar and grout - Part 4: Admixtures for prestressing
tendons - Definitions, requirements, conformity, marking and labelling (First Malaysian Standard RACK 1
revision)
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed
concrete - Definitions, requirements, conformity, marking and labelling (First Malaysian Standard RACK 1
revision)
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity
Malaysian Standard RACK 1
control and evaluation of conformity (First revision)
Safety of machinery - principles of risk assessment (ISO 14121: 1999, IDT) Malaysian Standard RACK 2
Safety of machinery - principles of risk assessment (ISO 14121: 1999, IDT) Malaysian Standard RACK 2
Statistical intrepretation of data - Power of tests relating to means and variances Malaysian Standard RACK 2
Cranes - Training of operators - General (ISO 9926-1: 1990, IDT) Malaysian Standard RACK 2
Quality management - Guidelines to quality in project management Malaysian Standard RACK 2
Guidelines for auditing qualilty systems Part 2: Qualification criteria for quality
Malaysian Standard RACK 2
systems auditors
Guidelines for auditing qualilty systems Part 3: Management of audit
Malaysian Standard RACK 2
programmes
Quality assurance requirements for measuring equipment : Part 1: Metrological
Malaysian Standard RACK 2
confirmation system for maesuring equipment
Quality assurance requirements for measuring equipment : Part 2: Guidelines
Malaysian Standard RACK 2
for control of measurement processes
Quality management systems - Guidelines for quality management in projects
Malaysian Standard RACK 2
(First revision) (ISO 10006: 2003, IDT)
Quality management - Guidelines for training (ISO 10015: 199, IDT) Malaysian Standard RACK 2
Financial transaction cards - Security architecture of financial transaction
Malaysian Standard RACK 2
systems using integrated circuit cards Part 6: Cardholder verification
Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1: 1995,
Malaysian Standard RACK 2
IDT)
Ceramic tiles - Part 1: Determination of dimensions and surface quality (ISO
Malaysian Standard RACK 2
10545-2: 1995, IDT)
Ceramic tiles - Part 3: Determination of water absorption, apparent porosity,
Malaysian Standard RACK 2
apparent relative density and bulk density (ISO 10545-3: 1995, IDT)
Environmental management systems - specification with guidanace for use Malaysian Standard RACK 2
Environmental management systems - specification with guidanace for use Malaysian Standard RACK 2
Environmental management - Life cycle assessment - Principles and framework Malaysian Standard RACK 2
Steel for the reinforcement and presstessing of concrete - Test methods - Part 1:
Malaysian Standard RACK 2
Reinforcing bars, wire rod and wire (ISO 15630-1: 2010, IDT)
Steel for the reinforcement and presstessing of concrete - Test methods - Part 2:
Malaysian Standard RACK 2
Welded fabric (ISO 15630-2: 2010, IDT)
Steel for the reinforcement and presstessing of concrete - Test methods - Part 3:
Malaysian Standard RACK 2
Prestressing steel (ISO 15630-3: 2002, IDT)
Guidelines for quality and/or environmental management systems auditing
Malaysian Standard RACK 2
(ISO 190111: 2002,IDT)
Geographic information - quality principles (ISO 19113: 2002, IDT) Malaysian Standard RACK 2
Energy management systems - requirements with guidance for use (ISO 50001:
Malaysian Standard RACK 2
2011, IDT)
Sampling procedures for inspection by attributes - Part 1: Sampling schemes
indexed by acceptance quality limit (AQL) for lot by lot inspection (ISO 2859- Malaysian Standard RACK 2
1: 1999, IDT)
Sampling procedures for inspection by attributes - Part 3: Skip lot sampling
Malaysian Standard RACK 2
procedures (ISO 2859-3: 1991, IDT)
Statistics - Vocabulary and symbols - Part 1: Probability and general statistical
Malaysian Standard RACK 2
terms (ISO 3534-1: 1993, IDT)
Information processing - Basic mode control procedures for data
Malaysian Standard RACK 2
communication systems
Alphanumeric character sets for optical recognition - Part 2: Character set OCR
Malaysian Standard RACK 2
B shapes and dimensions of the printed image
ISO general purpose metric screw threads - tolerances - Part 1: Principles and
Malaysian Standard RACK 2
basic data (ISO 965-1: 1998, IDT)
Specification for hot dip galvanized coatings on iron and steeel articles Malaysian Standard RACK 2
Printing specification for optical characteristic recognition Malaysian Standard RACK 2
Information processing - precision reels for magnetic tape used in interchage
Malaysian Standard RACK 2
instrumentation applications
Data processing - procedures for registration of escape sequences Malaysian Standard RACK 2
Information technology - vocabulary Part 25: Local Area Networks Malaysian Standard RACK 2
Rubber hose, textile reinforced for compressed air - Specification (ISO 2398:
Malaysian Standard RACK 2
1995, IDT)
Statistical interpretation of test results - estimation of the mean - confidence
Malaysian Standard RACK 2
interval
Sampling procedures and charts for inspection by variables for percent
Malaysian Standard RACK 2
nonconforming
Information processing - Dara interchange on 6,30 mm (0.25 in) magnetic tape
Malaysian Standard RACK 2
cartridge, 63 bpmm (1 600 bpi) phase encoded
Information processing - magnetic tape cassette and cartridge labelling and file
Malaysian Standard RACK 2
structure for information interchange
Information technology - Data communication - 37 pole DTE/DCE interface
Malaysian Standard RACK 2
connector and contact number assignments
Information technology - Data communication - 15 pole DTE/DCE interface
Malaysian Standard RACK 2
connector and contact number assignments
Office machines - vocabulary - section 2: Duplicators Malaysian Standard RACK 2
Office machines - vocabulary - section 3: Addressing machines Malaysian Standard RACK 2
Office machines - vocabulary - section 4: Letter opening machines Malaysian Standard RACK 2
Office machines - vocabulary - section 5: Letter folder machines Malaysian Standard RACK 2
Office machines - vocabulary - section 7: Postal franking machines Malaysian Standard RACK 2
Office machines - vocabulary - section 9: Typewriters Malaysian Standard RACK 2
Information processing - Data interchange on 130 mm (5.25 in) flexible disk
cartridge using two- frequency recording at 7 958 ftprad, 1,9 tp, (48 tpi) on one Malaysian Standard RACK 2
side - Part 2: track format
Ergonomic principles in the design of work systems (ISO 6385: 2004, IDT) Malaysian Standard RACK 2
Acceptance control charts (ISO 7966: 1993, IDT) Malaysian Standard RACK 2
Rubber and plastic hoses and hose assemblies - vocabulary (ISO 8330: 1998,
Malaysian Standard RACK 2
IDT)
Information processing - Data interchange on 130 mm (5.25 in) flexible disk
cartridges using modified frequency modulation recording at 7 958ftprad, 3,8 Malaysian Standard RACK 2
tpmm (96 tpi) on both sides - Part 2: Track format A
Information processing - Data interchange on 130 mm (5.25 in) flexible disk
cartridges using modified frequency modulation recording at 7 958ftprad, 3,8 Malaysian Standard RACK 2
tpmm (96 tpi) on both sides - Part 3: Track format B
Sequential sampling plans for inspection by variables for percent
Malaysian Standard RACK 2
nonconforming (known standard deviation)
Information processing - Data interchange on 6,30 mm (0.25 in) magnetic tape
cartridge using GCR recording at 394 ftp MM (10 000 ftpi), 39 cpmm (1 000 Malaysian Standard RACK 2
cpi) - Part 1: Mechanical, physical and magnetic properties
Information processing - Data interchange on 6,30 mm (0.25 in) magnetic tape
cartridge using GCR recording at 394 ftp MM (10 000 ftpi), 39 cpmm (1 000 Malaysian Standard RACK 2
cpi) - Part 2: Streaming mode
Information processing - Data interchange on 130 mm (5.25 in) flexible disk
cartridges using modified frequency modulation recording at 13 262 ftprad, on
Malaysian Standard RACK 2
80 tracks on each side - Part 1: Dimensional, physical and magnetic
characteristics
Information processing - Data interchange on 130 mm (5.25 in) flexible disk
cartridges using modified frequency modulation recording at 13 262 ftprad, on Malaysian Standard RACK 2
80 tracks on each side - Part 2: Track format A for 77 tracks
Information processing - Data interchange on 130 mm (5.25 in) flexible disk
cartridges using modified frequency modulation recording at 13 262 ftprad, on Malaysian Standard RACK 2
80 tracks on each side - Part 3: Track format B for 80 tracks
Information processing - program constructs and conventions for their
Malaysian Standard RACK 2
representation
Risk management - Vocabulary (ISO GUIDE 73: 2009, IDT) Malaysian Standard RACK 2
General requirements for bodies operating assessment and certification /
registration of environmental management systems (EMS) (ISO/IEC GUIDE Malaysian Standard RACK 2
66: 1999 (E), IDT)
General requirements for bodies operating product certification systems
Malaysian Standard RACK 2
(ISO/IEC GUIDE 65: 1999(E), IDT)
General requirements for bodies operating assessment and certification /
Malaysian Standard RACK 2
registration of quality systems (ISO/IEC GUIDE 62: 1996 (E), IDT)
General requirements for assessement and accreditation of certification /
Malaysian Standard RACK 2
registration bodies (ISO/IEC GUIDE 61: 1996 (E), IDT)
Information technology - Keyboard layouts for text and office systems - Part 1:
Malaysian Standard RACK 2
General principles governing keyboard layouts (ISO/IEC 9995-1: 1994, IDT)
Information technology - OSI - Conformance test suite for ISO 9041-1, virtual
Malaysian Standard RACK 2
terminal basic class protocol - Part 1: Test suite structure and test purposes
Information technology - Text and office systems - referenced data transfer Part
Malaysian Standard RACK 2
1: Abstract service definition
Information technology - Text and office systems - referenced data transfer Part
Malaysian Standard RACK 2
2: Protocol specifications
Information technology - Telecommunications and information exchange
between systems - Elements of management information related to OSI Data Malaysian Standard RACK 2
link layer standards
Information technology - software maintenance (ISO/IEC 14764: 1999, IDT) Malaysian Standard RACK 2
Information and documentation - electronic manuscript preparation and markup Malaysian Standard RACK 2
Risk management - Risk assessment techniques (IEC/ISO 31010: 2009,IDT) Malaysian Standard RACK 2
Tubular fluorescent lamps for general lighting service Malaysian Standard RACK 2
Glow starters for fluorescent lamps Malaysian Standard RACK 2
Appliance couplers for household and similar general purposes - Part 1: General
Malaysian Standard RACK 2
requirements
Appliance couplers for household and similar general purposes - Part 2:
Malaysian Standard RACK 2
Interconnection couplers for household and similar equipment
Safety of household and similar electrical appliances Part 2: Particular
Malaysian Standard RACK 2
requirements for clocks
Electrical installations of buildings Part 1: Scope,object and fundamental
Malaysian Standard RACK 2
principles
Electrical installations of buildings Part 2: Definitions - Chapter 21: Guide to
Malaysian Standard RACK 2
general terms
Safety of household and similar electrical appliances Part 2: Particular
Malaysian Standard RACK 2
requirements for battery charges
Electrical installations of buildings Part 3: Assessment of general characteristics Malaysian Standard RACK 2
Common test methods for insulating and sheating materials of electric cables
Part 1: Methods for general application Section 1: Measurement of thickness Malaysian Standard RACK 2
and overall dimensions - tests for determining the mechanical properties
Common test methods for insulating and sheating materials of electric cables
Malaysian Standard RACK 2
Part 1: Methods for general application Section 2: Thermal ageing methods
Common test methods for insulating and sheating materials of electric cables
Part 1: Methods for general application Section 3: Methods for determining the Malaysian Standard RACK 2
density - water absorption tests - shrinkage test
Common test methods for insulating and sheating materials of electric cables
Malaysian Standard RACK 2
Part 1: Methods for general application Section 4: Tests at low temperature
Common test methods for insulating and sheating materials of electric cables
Part 2: Methods specific to elastomeric compaunds Section 1: Ozone resistance Malaysian Standard RACK 2
test - hot set test - mineral oil immersion test
Common test methods for insulating and sheating materials of electric cables
Part 3: Methods specific to PVC compaunds Section 1: Pressure for resistance Malaysian Standard RACK 2
to cracking
Common test methods for insulating and sheating materials of electric cables
Part 3: Methods specific to PVC compaunds Section 2: Loss of mass test - Malaysian Standard RACK 2
thermal stability test
Common test methods for insulating and sheating materials of electric cables
Part 4: Methods specific to polyethylene and polypropylene compaunds Section
1: Resistance to environmental stress cracking - wrapping test after thermal Malaysian Standard RACK 2
ageing in air - measurement of the melt flow index - carbon black and/or
mineral content measurement in PE
Common test methods for insulating and sheating materials of electric cables
Part 5: Methods specific to filling compaunds Section 1: Drop point - separation
Malaysian Standard RACK 2
of oil - lower temparature brittleness - total acid number - absence of corrosive
components - permittivity at 23⁰c - D.C Resistivity at 23 ⁰c and 100 ⁰c
Ballasts for discharge lamps (excluding tubular fluorescent lamps) general and
Malaysian Standard RACK 2
safety requirements
Auxiliaries for lamps - ballasts for discharge lamps (excluding tubular
Malaysian Standard RACK 2
fluorescent lamps) - performance requirements
A.C supplied electronic ballasts for tubular fluorescent lamps general and safety
Malaysian Standard RACK 2
requirements
A.C supplied electronic ballasts for tubular fluorescent lamps - Performance
Malaysian Standard RACK 2
requirements
Low voltage switchgear and controlgear Part 1: General rules Malaysian Standard RACK 2
Low voltage switchgear and controlgear Part 4: Contractors and motor- starters
Malaysian Standard RACK 2
Section 1: Electromechanical contractors and motor starters
Low voltage power supply devices, d.c. output - performance characteristics
Malaysian Standard RACK 2
and safety requirements
High - pressure mercury vapour lamps (IEC 60188: 1974, IDT) Malaysian Standard RACK 2
Conductors of insulated cables (IEC 60228: 1978, First Supplement 228A: 1982
Malaysian Standard RACK 2
and Amendment 1: 1993, IDT)
Edison screw lamholders (IEC 60238: 1998, IDT) Malaysian Standard RACK 2
Tests on cable oversheaths which have a special protective function and are
Malaysian Standard RACK 2
applied by extrusion (IEC 60229: 1982, IDT)
Tests for electric cables under fire conditions - circuit integrity - Part 11:
Apparatus - fire alone at a flame temparature of a least 750⁰c (IEC 60331-11: Malaysian Standard RACK 2
1999,IDT)
Tests for electric cables under fire conditions - circuit integrity - Part 21:
Procedures and requirements - cables of rated voltage up to and including Malaysian Standard RACK 2
0.6/1.0 kV (IEC 60331-21: 1999,IDT)
Tests for electric cables under fire conditions - circuit integrity - Part 23:
Malaysian Standard RACK 2
Procedures and requirements - Electric data cables (IEC 60331-23: 1999,IDT)
Tests for electric cables under fire conditions - circuit integrity - Part 25:
Malaysian Standard RACK 2
Procedures and requirements - Optical fibre cables (IEC 60331-25: 1999,IDT)
Tests on electric cables under fire conditions Part 1: Test on a single vertical
Malaysian Standard RACK 2
insulated wire or cable (IEC 60332-1: 1993,IDT)
Safety of household and similar electrical appliances - Part 2: Particular
Malaysian Standard RACK 2
requirements for air cleaning appliances (First revision)
Safety of household and similar electrical appliances - Part 2: Particular
requirements for humidifiers intended for use with heating, ventilation or air Malaysian Standard RACK 2
conditioning systems (IEC 60335-2-88: 1997, IDT)
Safety of household and similar electrical appliances - Part 2: Particular
Malaysian Standard RACK 2
requirements for electrical heat pumps, air conditioners and dehumidifiers
Safety of household and similar electrical appliances - Part 2: Particular
requirements for portable heating tools and similar appliances (IEC 60335-2-45: Malaysian Standard RACK 2
1996,IDT)
Standard method of measurement of lamp cap temperature rise (IEC 60360:
Malaysian Standard RACK 2
1998, IDT)
Power cables with extruded insulation and their accessories for rated voltages
from 1kV (Um = 1.2 kV) up to 30 Kv (Um = 36 kV) - Part 2: Cables for rated Malaysian Standard RACK 2
voltages from 6 Kv (Um = 7.2 kV) up to 30 Kv (Um = 36 kV)
Power cables with extruded insulation and their accessories for rated voltages
from 1kV (Um = 1.2 kV) up to 30 Kv (Um = 36 kV) - Part 4: Test requirements
Malaysian Standard RACK 2
on accessories for cables with rated voltages from 6 Kv (Um = 7.2 kV) up to 30
Kv (Um = 36 kV)
Degree of protection provided by enclosures (IP Code) (IEC 60529: 1999 and
Malaysian Standard RACK 2
its amendment 1: 1999, IDT)
Luminares Part 2: Particular requirements Section 2: Recessed luminaires Malaysian Standard RACK 2
Luminares Part 2: Particular requirements Section 3: Luminaires for road and
Malaysian Standard RACK 2
street lighting
Luminares Part 2: Particular requirements Section 5: Floodlights Malaysian Standard RACK 2
Luminares Part 2: Particular requirements Section 8: Handlamps Malaysian Standard RACK 2
Luminares Part 2: Particular requirements Section 18: Luminaires for
Malaysian Standard RACK 2
swimming pools and similar applications
Luminares Part 2: Particular requirements Section 20: Lightning chains Malaysian Standard RACK 2
Luminares Part 2: Particular requirements Section 25: Luminaires for use on
clinical areas of hospitals and health care buildings (IEC 60598-2-25: 1994 and Malaysian Standard RACK 2
its corrigendum: 1994, IDT)
Tungsten filament lamps for domestic and similar general lighting purposes
Malaysian Standard RACK 2
performance requirements (IEC 60064: 1994, IDT)
Audio, video and similar electronic apparatus - safety requirements (First
Malaysian Standard RACK 2
revision) (IEC 60065: 2001, IDT)
Auxiliaries for lamps - starting devices (other than glow starters) general and
Malaysian Standard RACK 2
safety requirements (IEC 60926: 1995, and its amendment 1: 1999, IDT)
General requirements for enclosures for accessories for household and similar
Malaysian Standard RACK 2
fixed electrical installations (IEC 60670: 1989 and its amendment 1: 1994, IDT)
High - pressure sodium vapour lamps (IEC 60662: 1980, IDT) Malaysian Standard RACK 2
Heat test source (H.T.S) lamps for carrying out heating tests on luminaires (IEC
Malaysian Standard RACK 2
60634: 1993, IDT)
Filament lamps for road vehicles - dimensional, electrical and luminpus
Malaysian Standard RACK 2
requirements (IEC 60809: 1995 and its amendment 1: 1996, IDT)
Miscellaneous lampholders - Part 1: General requirements and tests (IEC
Malaysian Standard RACK 2
60838-1: 1997, IDT)
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 2: Limits for
harmonic current emissions (equipment input current ≤ 16A per phase) (IEC Malaysian Standard RACK 2
61000-3-2: 1995, IDT)
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 2: Limits for
harmonic current emissions (equipment input current ≤ 16A per phase) (IEC Malaysian Standard RACK 2
61000-3-2: 2001, IDT)
Single capped fluorescent lamps - Safety specifications (IEC 61199: 1999, IDT) Malaysian Standard RACK 2
Assessement of the risk of damage due to lightning (IEC 61662: 1995, IDT) Malaysian Standard RACK 2
Adjustable speed eletrical power drive system - Part 3: EMC product standard
Malaysian Standard RACK 2
including specific test methods (IEC 61800-3: 1996, IDT)
Uninterruptible power system (UPS) Part 2: Electromagnetic compactability
Malaysian Standard RACK 2
(EMC) requirements (IEC 62040-2: 1999, IDT)
Procedure for use in the preparation of maximum lamp outlines (IEC 61126:
Malaysian Standard RACK 2
1992 and its amendment 1: 1996, IDT)
Equipment for general lighting purposes - EMC immunity requirement (IEC
Malaysian Standard RACK 2
61547: 1995, IDT)
Electrical equipment for measurement, control and laboratory use - EMC
requirement - Part 1: General requirements (IEC 61326-1: 1997, its amendment Malaysian Standard RACK 2
1: 1998 and amendment 2: 2000, IDT)
Protection against lighting - Part 1: General principles (First revision) Malaysian
RACK 2
(IEC 62305-1: 2006, IDT) Standard
Protection against lighting - Part 2: Risk management (First revision) Malaysian
RACK 2
(IEC 62305-2: 2006, IDT) Standard
Protection against lighting - Part 3: Physical damage to structures and Malaysian
RACK 2
life hazard (First revision) (IEC 62305-3: 2006, IDT) Standard
Protection against lighting - Part 4: Electrical and electronic systems Malaysian
RACK 2
within structures (First revision) (IEC 62305-4: 2006, IDT) Standard