Escolar Documentos
Profissional Documentos
Cultura Documentos
NILOS LINING
NILOS 35
NILOS 35 rubber lining is a highly wear resistant and highly elastic rubber lining product
which is most commonly used in the following applications:
NILOS 35 rubber lining is available with Plain, Tear-Off Fabric or Bonding Layer backing
for extra adhesion.
NILOS 35
NILOS LINING
NILOS 40
NILOS 40 rubber lining provides an excellent combination of wear resistance, high tensile
strength and very good elasticity properties. It is commonly used for:
NILOS 40 rubber lining is available with Plain, Tear-Off Fabric or Bonding Layer backing
for extra adhesion.
NILOS 40
NILOS LINING
NILOS 50
NILOS 50 rubber lining provides very good abrasion and wear resistance in wet appli-
cations. NILOS 50 also has a high resistance to cutting. It is almost commonly used for:
• Wet applications.
• Lining of tanks, chutes and discharge hoppers for round grains.
• As rubber lagging for non-driven pulleys (i.e. tail pulleys) in situations with low belt
traction (assists against caking).
NILOS 50 rubber lining is available with Plain, Tear-Off Fabric or Bonding Layer backing
for extra adhesion.
NILOS 50
NILOS LINING
NILOS 60
NILOS 60 rubber lining provides excellent wear resistance in areas of dry abrasion and
impact. NILOS 60 also provides excellent resistance to weather conditions. It is most
commonly used for:
• Lining for vibration chutes, material transfer points and impact curtains.
• Lining of slides, silos, bunkers as well as truck bodies and filtering buckets.
• Lagging for non-driven pulleys (i.e. tail pulleys) in situations with moderate to high
belt traction.
NILOS 60 rubber lining is available with Plain, Tear-Off Fabric or Bonding Layer backing
for extra adhesion.
NILOS 60
NILOS LINING
NILOS 70
NILOS 70 rubber lining is best suited for situations where high-level wear and abrasion
resistance, high tensile strength as well as high weather resistance is necessary.
• Lining for material transfer points, impact curtains, truck bodies and vibrating
conveyors.
• Lining of chutes, slides and bunkers.
• Cold repairing the surface of conveyor belts.
• Lagging for non-driven pulleys (i.e. tail pulleys) in situations with moderate to high
belt traction.
NILOS 70 rubber lining is available with Plain, Tear-Off Fabric or Bonding Layer backing for
extra adhesion.
NILOS 70
NILOS LINING
4. ROTOCUT
Vulcanizing presses Steel-cord belt cutters
1. for all belt types for hot vulcanizing
and repairs
Pulley lagging
3. plain or diamond-grooved 11. Conveyor belt idlers
Belt rip detection
5. system
Profiled strip
6. pulley lagging
TOPGUM COLD
9. 12. adhesive
Conveyor belts
8. Belt scrapers 14. Splicing sets HOT
13. Cold splicing material for hot vulcanizing
7. Ceramic strip
pulley lagging
15. Tools
for the processing / machining of conveyor belts
16. Services
all around the conveyor belt
Financing
Training courses 18. Leasing, etc.
17. worldwide
...the whole belt from one source.
Fax:
© 07/2010 NILOS_EN_45
Subject to technical alterations
D-40721 Hilden
Reisholzstraße 15
Web: www.nilos.com
NILOS® GmbH & CO. KG
Email: sales@nilos.com
+49-2103-951-219
Phone: +49-2103-951-210