Escolar Documentos
Profissional Documentos
Cultura Documentos
ARDEX CL11
Commercial Smoothing and Levelling Compound
Features
ARDEX CL11
Commercial Smoothing and Levelling Compound
SPECIFICATION CLAUSE MIXING
All indicated sub-floors will be prepared with ARDEX CL11 The use of an ARDEX mixing paddle with a 10mm chuck, variable
self levelling compound manufactured by ARDEX . Where speed drill ensures thorough mixing with maximum sheer yet
applicable a DPM of ARDEX WPM 300 Hydrepoxy shall be minimum air entrapment and heat build up. The use of ARDEX
installed. All in accordance with the manufacturer’s printed mixing buckets is recommended to reduce the incidence of
literature unmixed powder around the bottom of the bucket.
ARDEX CL11
Commercial Smoothing and Levelling Compound
PRECAUTIONS
ARDEX CL11 contains more than 20% cement and , therefore
in line with current legislation, is classified as irritating to eyes
and skin. For this reason, the following precautions should be
observed:
TECHNICAL DATA
Bulk density of powder approx. 1.0kg/litre
Weight of fresh mortar approx. 2.0kg/litre
o
Working time at 30 C approx. 20 minutes
o
Flow life at 30 C approx. 15 minutes
Initial Set (Vicat) approx. 40 minutes
Final Set (Vicat) approx. 1 hour
NOTE:
The information supplied in our literature or given by our employees is based upon extensive
experience and, together with that supplied by our agents for distributors, is given in good faith in
order to help you. Our company policy is one of continuous Research and Development; we therefore
reserve the right to update this information at any time without prior notice. We also guarantee the
consistent high quality of our products; however, as we have no control over site conditions or the
execution of the work, we accept no liability for any loss or damage which may arise as a result
thereof.