i. Engineer's Comments - AAB's Response on Latest Revision
l In response to Engineer's comments raised on the recent technical submial. l l Engineer's Comments l AAB's Response l 1) As applicable. l 1) AAB's General Response to Engineer's Comments: l l Please note that the Design Criteria used in this calcula"on package is exactly the same as l the Code A - Approved General Design Criteria, submied with transmial number l BMSS-TRANSMIT-003815. l l Please note that we are revising this calcula"on package, submied with transmial number l BMSS-TRANSMIT-016176, to reflect the changes in the system design, including, but is not l l limited to, thechange in the thickness and the interlayer of the glass panels, the change in l the imposed loads and other changes in the structural system. l l The calcula"on package has been massively edited and reorganized. In line with this, AAB l shall no longer address the Engineer's Comments point by point, as the comments are now l either addressed, moot or inapplicable. l l However, AAB would like to raise the following points related to the submission of this l calcula"on package: l 1. AAB always aaches Reference Drawin gs, from which complete dimensions of all l details may be obtained. For this reason, AAB does not repeat all these dimensions l within the calcula"on package. l 2. It is AAB prac"ce to present only either the most cri"cal or themost typical of the l l details; those which are less cri"cal or form a small frac"on of the total quan"ty are l verified by AAB internally, and are not included in this calcula"on package. l l l l l l l l l l l l l