Escolar Documentos
Profissional Documentos
Cultura Documentos
Subject : Offer for PLC Based Automation System & MCC Panels for Pumps
Dear Sir,
This refers to your enquiry regarding the above subject requirement, Based on details provided by you; we are pleased
to submit our Price offer as under:
Sincerely
Nitin Bansal
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
Annexure I
Design Consideration
IO List
Intake QTY DI DO AI AO
PUMP 4 3 2
PT 4 1
FT 4 1
3 2 2
20% SPARE 4 1 2
Annexure II
Product Overview
Benefits
Ethernet port provides web server and e-mail capability.
Built-in LCD with backlight allows you to view controller and I/O status, and provides a simple interface for
messages, bit/integer monitoring and manipulation.
Expand your application capabilities through support of up to seven expansion I/O modules (1762 I/O) with
256 digital I/O.
Target Applications
Material Handling
Packaging Applications
General Industrial Machinery
Printing
Food and Beverage
Pharmaceutical
Water /Wastewater / SCADA Applications
Clutch/Brake control
Position Control — Pick-and-place / Conveyor
Product Design
The Micrologix 1400 system offers higher I/O count, faster high-speed counter/PTO, and enhanced network
capabilities. Micrologix 1400 controllers without embedded analog come with 32 digital I/O count, while analog
versions have 32 digital I/O and 6 analog I/O. All versions can be expanded using up to seven 1762 I/O modules — the
same I/O modules that Micrologix 1100 and 1200 controllers utilize.
The Micrologix 1400 controller houses embedded inputs, outputs, power supply, and communication ports. It also
provides the interface to expansion I/O when required by an application.
Features
Up to six embedded 100 kHz high-speed counters (on controllers with DC inputs).
Two serial ports with DF1/DH-485/Modbus RTU/DNP3/ASCII protocol support.
Embedded 10/100 Mbps Ethernet port with EtherNet/IP, Modbus TCP/IP and DNP3 over IP support
10K words user program memory and 10K words user data memory.
Up to 128 KB for data logging and 64 KB for recipe.
Program with RSLogix 500 or RSLogix Micro programming software.
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
Communication
The Micrologix 1400 controllers provide an isolated RS-232C/RS-485 port, an RJ45 Ethernet port, and a non-isolated
RS-232C port. The ports can be used for the following types of communication.
Communication Description
Communication channel 0 • Use the RS-485 cable (1763-NC01) to
Isolated RS-232C and RS-485 electrical compatibility (on separate pins) interface directly to RS-485 networks.
• DF1 full-duplex, DF1 half-duplex master and
slave, DF1 radio modem.
• DH-485; If you use RS-232C port and
existing cables, an Advanced Interface
Converter (1761-NET-AIC) and external
power is required for networking. DH-485 is
also supported directly using the RS-485
cable (1763-NC01) on this port.
• Modbus RTU master and RTU slave; If you
use RS-232C port and existing cables, an
Advanced Interface Converter (1761-NET-
AIC) and external power is required for
networking. Modbus RTU networking is also
supported directly using the RS-485 cable
(1763-NC01) on this port.
• DNP3 slave.
• ASCII.
Communication channel 1 • 10/100 Mbps port with support for BOOTP,
RJ45 port supports EtherNet/IP for peer-to-peer messaging DHCP, and SNMP capability directly from the
controller.
• Automatically assign IP address through
DHCP or BOOTP, or configure using RSLogix
500 programming software.
• Monitor your IP address through the LCD
Display (or use the write-on nameplate).
• Supports CIP as well as DNP3 over IP and
Modbus TCP/IP.
• Allows controllers to exchange data with
other controllers through messaging; does
not support scanning of I/O on Ethernet
adapters.
Communication channel 2 • DF1 full-duplex, DF1 half-duplex master and
Non-isolated RS-232C port slave, DF1 radio modem.
• DH-485; an Advanced Interface Converter
(1761-NET-AIC) and external power is
required for networking.
• Modbus RTU master and RTU slave; an
Advanced Interface Converter (1761-NET-
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
SCADA SYSTEM:
For plant visualization, we propose the RsViewSE HMI software. There is no limit to the tag
handling capacity of the RsViewSE software.
Each of these Operator stations shall be based on a Commercial grade PC, with dual Ethernet
connectivity.
The HMI station shall present all the necessary plant information in a user-friendly way, in the form
of including dynamic graphics, database, trends (real time and Historical), data logging etc.
Alarms with controller timestamps can be displayed in alarm banners and alarm summaries. Alarm
banner can be “docked” in any part of the operator station display.
Global objects including faceplates can be edited to customize look and feel for the application.
Softstarters
The SMC Flex controller provides microprocessor controlled starting for standard 3-phase squirrel-cage induction or
Wye-Delta (6-lead) motors. Seven standard modes of operation are available within a single controller.
1…1250 A Range
Seven Standard Start Modes
Options Include Pump Control and Braking Control
Features
Built in SCR Bypass/Run Contactor
Built in Electronic Motor Overload Protection
CT on each Phase
Metering
LCD Display
Keypad Programming
Four Programmable Auxiliary Contacts
The SMC Flex controller provides the following modes of operation as standard:
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
Soft Start
Full Voltage Start
Selectable Kickstart
Linear Speed Acceleration
Current Limit Start
Preset Slow Speed
Dual Ramp Start
Soft Stop
Soft Start
This method covers the most general applications. The motor is given an initial torque setting, which is user
adjustable. From the initial torque level, the output voltage to the motor is sleeplessly increased during the
acceleration ramp time, which is user adjustable.
Selectable Kickstart
The kickstart feature provides a boost at startup to break away loads that may require a pulse of high torque to get
started. It is intended to provide a current pulse, for a selected period of time.
rate. The required feedback signal is provided by a DC tachometer coupled to the motor (tachometer supplied by user
0-5V DC, 4.5V DC = 100% speed). Kickstart is available with this mode.
Soft Stop⋆
The Soft Stop option can be used in applications requiring an extended stop time. The voltage ramp down time is use
adjustable from 0 to 120 seconds. The load will stop when the voltage drops to a point where the load torque is
greater than the motor torque.
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
⋆ Not intended to be used as an emergency stop. Refer to the applicable standards for emergency stop requirments.
Pump Control
This option is used to reduce surges during the starting and stopping of a centrifugal pump by smoothly accelerating
and decelerating the motor. The microprocessor analyzes the motor variables and generates commands which control
the motor and reduce the possibility of surges occurring in the system. The pump control module also provides a built-
in anti-backspin timer.
Braking Control
This option provides motor braking for applications that require the motor to stop faster than a coast to rest. Braking
control, with automatic zero speed shut off, is fully integrated into the compact design of the SMC controller. This
design facilitates a clean, straight forward installation and eliminates the requirement for additional hardware such as
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
braking contactors, resistors, timers, and speed sensors. The microprocessor based braking system applies braking
current to a standard squirrel-cage induction motor. The strength of the braking current is programmable from
150…400% of full-load current.
Accu-Stop⋆
This option is used in applications requiring controlled position stopping. During stopping, braking torque is applied to
the motor until it reaches preset slow speed (7% or 15% of rated speed) and holds the motor at this speed until a stop
command is given. Braking torque is then applied until the motor reaches zero speed. Braking current is
programmable from 0…400% of full-load current. Slow Speed Current is programmable from 0…450% of full-load
current. Slow speed can be programmed for either 7% (low) or 15% (high).
Slow Speed with Braking is used on applications that require slow speed (in the forward direction) for positioning or
alignment and also require braking control to stop. Slow speed adjustments are 7% (low) or 15% (high) of rated speed.
Slow speed acceleration current is adjustable from 0…450%. Slow speed running current is adjustable from 0…450% of
full-load current. Braking current is adjustable from 0…400%.
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
Underload Protection
Utilizing the underload protection of the SMC Flex controller, motor operation can be halted if a drop in current is
sensed.
The SMC Flex controller provides an adjustable underload trip setting from 0…99% of the programmed motor full-load
current rating with an adjustable trip delay time of 0…99 seconds.
Undervoltage Protection
The SMC Flex controller’s undervoltage protection will halt motor operation if a drop in the incoming line voltage is
detected.
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
The undervoltage trip level is adjustable as a percentage of the programmed line voltage, from 0…99%. To eliminate
nuisance trips, a programmable undervoltage trip delay time of 0…99 seconds can also be programmed. The line
voltage must remain below the undervoltage trip level during the programmed delay time.
Overvoltage Protection
If a rise in the incoming line voltage is detected, the SMC Flex controller’s overvoltage protection will halt motor
operation.
The overvoltage trip level is adjustable as a percentage of the programmed line voltage, from 0…199%. To eliminate
nuisance trips, a programmable overvoltage trip delay time of 0…99 seconds can also be programmed. The line
voltage must remain above the overvoltage trip level during the programmed delay time.
Metering
Power monitoring parameters include:
Note:The motor thermal capacity usage allows the user to monitor the amount of overload thermal capacity usage
before the SMC Flex controller’s built-in electronic overload trips.
LCD Display
The SMC Flex controller’s three-line 16-character backlit LCD display provides parameter identification using clear,
informative text. Controller set up can be performed quickly and easily without the use of a reference manual.
Parameters are arranged in an organized four-level menu structure for ease of programming and fast access to
parameters.
Keypad Programming
Programming of parameters is accomplished through a five-button keypad on the front of the SMC Flex controller. The
five buttons include up and down arrows, an Enter button, a Select button, and an Escape button. The user needs only
to enter the correct sequence of keystrokes for programming the SMC Flex controller.
Auxiliary Contacts
Four fully programmable hard contacts are furnished as standard with the SMC Flex controller:
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
Network I/O
The SMC Flex can have up to two inputs and four outputs controlled via a communication network. The output
contacts use the auxiliary contacts.
Tach Input
A motor tachometer is required for the Linear Speed Start mode. Please see the Specifications section on page for
tachometer characteristics.
PTC Input
A motor PTC input can be monitored by the SMC Flex. In the event of a fault, the SMC Flex will shut down and indicate
a motor PTC fault.
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
1. Intake :
4. Data Concentrator
5. Services
Exclusion:
Annexure IV
Commercial Terms & Conditions
Prices : The above prices are Ex. works Noida & exclusive of packing, forwarding Freight, insurance
The same will be charged extra as actual.
Sales Tax : 2 % CST will be charged extra against Form ‘C’ or 14% VAT whichever is applicable.
Service Tax : Will be charged extra @12.36% on all the service invoices raised.
Nitin Bansal
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
Dear Sir,
We are pleased to submit our offer against your above subject enquiry for Automation
Hope the offer is in line with your requirement.
ABSTRACT OF COST
Name of Work :- Providing & Fixing PLC based Automation System
d Butterfly Valve
Line Size: 80 mm & 65 mm 2 30000 60000
Make: Belimo/Mascon/Geroge Fisher
Total 16,42,500/-
Dyanamic Engineers Ltd.
Corporate Office: D- 94, First Floor, Sector- 63, Noida-201301 (U.P.)
Phone: +91 0120-4787500, Fax: +91 – 0120-4787505, www.depl.biz
AN ISO 9001: 2008 COMPANY
6. Miscellaneous Charges
a. Over Head, cables & Conveyance charges @7.5% 123187.00
b. Insuarance, carriage & installation @ 3.5% 57487.00
G.Total 18,23,174/-
Or Say 18.23 Lacs
In case of any further technical / commercial clarification Please feel free to contact us.
Thanking you and assuring you of our best services at all times.
Nitin Bansal