Escolar Documentos
Profissional Documentos
Cultura Documentos
B. No
3. A baffle plate is fitted inside the oil pan to prevent the oil from splashing when it is subjected to vibration and other movement during vehicle
operation.
A. True
B. False
4. The motion of the cam is transferred to the valves through
A. pistons
B. rocker arms
C. camshaft pulley
D. valve stems
5. Which of the following symptom is caused as a result of brake disc run out ?
A. Ineffectiveness of the brakes
B. becomes foamy
C. turns black
D. none of these
7. The function of an alternator in an automobile is to
A. supply electric power
D. none of these
9. What type of bearing is used for main bearings and connecting rod bearings ?
A. Ballbearings
B. Plain bearings
D. all of these
20. The main function of intake manifold is that it
A. promotes the mixture of air and fuel
B. No
22. In automobiles G.V.W. refers to
A. gross vehicle width
B. 1-3-4-2
C. 1-2-4-3
D. 1-3-2-4
24. In a ventilated disc brake,
A. a duct directs air towards the caliper for cooling while the vehicle is moving
D. disc contains radial vanes between its rubbing surfaces for optimum cooling performance
25. The effect of having excess camber is
A. excessive steering alignment torque
B. hard steering
B. 15:1
C. 13:1
D. 10:1
27. The advantage of double-wishbone suspension design is that a large amount of freedom is available for setting geometry and precise settings
can be made for driving comfort and steerability,
A. Correct
B. Incorrect
28. The co-efficient of rolling resistance for a truck weighing 63 500 N is 0.018. The rolling resistance to the truck is
A. 1.143 N
B. 11.43 N
C. 114.3 N
39. If the resultant of two equal forces has the same magnitude as either of the forces, then the angle between the two forces is
A. 30°
B. 60°
C. 90°
D. 120°
40. A smooth cylinder lying on its convex surface remains in __________ equilibrium.
A. stable
B. unstable
C. neutral
41. Coefficient of friction is the ratio of the limiting friction to the normal reaction between the two bodies.
A. Yes
B. No
42. Moment of inertia of a circular section about an axis perpendicular to the section is
A. πd3/16
B. πd3/32
C. πd4/32
D. πd4/64
43. The time of flight (t) of a projectile on an upward inclined plane is(where u = Velocity of projection, α = Angle of projection, and β = Inclination of the
plane with the horizontal.)
A.
B.
C.
D.
B. m/s
C. m/s2
D. rad/s2
45. Moment of inertia of a triangular section of base (b) and height (h) about an axis passing through its C.G. and parallel to the base, is
A. bh3/4
B. bh3/8
C. bh3/12
D. bh3/36
46. If the masses of both the bodies, as shown in the below figure, are reduced to 50 percent, then tension in the string will be
A. increase
B. decrease
B. No
53. The frequency of oscillation of a torsional pendulum is
A.
B.
C.
D.
B. 45°
C. 60°
D. 90°
55. The mechanical advantage of a lifting machine is the ratio of
A. distance moved by effort to the distance moved by load
B. less than
C. greater than
57. A body will begin to move down an inclined plane if the angle of inclination of the plane is __________ the angle of friction.
A. equal to
B. less than
C. greater than
58. When a particle moves along a circular path with uniform velocity, there will be no tangential acceleration.
A. Correct
B.
C.
D.
B. imperfect
C. deficient
69. Mass moment of inertia of a uni form thin rod of mass M and length (l) about its mid-point and perpendicular to its length is
A.
B.
C.
D.
70. A resultant force is a single force which produces the same effect as produced by all the given forces acting on a body.
A. True
B. False