Escolar Documentos
Profissional Documentos
Cultura Documentos
DustR-145
Transparent Nano coating spray
Advanced Nano protective invisible barrier coating that prevents the accumulation of dirt
particles, water and any contaminants
Keeps wheels clean longer and cleaning easier
Retains aesthetic look of the surfaces
Protects the surface from harmful road grime and tyres dust, muddy waters etc.,
Easy to use; spray on and allow to dry
Safe for use on all type of surfaces
It can be applied on any substrates like glass, aluminum, copper, mild steel, stainless steel,
plastic, wood, mica, ceramics etc.,
It can also be used for Anti-wetting and self cleaning applications
Technical Properties
Note: These are typical values only cannot be treated as product specification.
DustR-145
Transparent Nano coating spray
Area of Application
Automotive Wind turbine blades
Solar panels Building Construction
Application Procedure
Surface Preparation
Thoroughly clean the surface with water/soap solution or any other cleaning solutions
Rinse surface thoroughly with water and dry it completely
Product Application
Wear respiratory mask and hand gloves as safety precaution
Make sure the surface to be coated must be clean and free from any contaminants (like
dirt, grease, oil, mud, road grime etc.)
Surface to be coated must be in dry condition before application of the product
Shake well the container before use
Spray the product on the dried surface from 10-12 cm of a distance
Allow it to dry for 2 hrs.
Drying time will vary depends on the atmospheric temperature.
Do not touch the coated surface after application as this will hamper the performance of
coating.
Disclaimer: Information contained in this data sheet is based upon the properties and applications of use known to us.
However, generally no legal liability may be deducted from such information.