Você está na página 1de 21

Charisma Victoria D.

 Cayapan
Basics on Geomatics and Satellite Orbits
Final Exam
17 December 2010
A. Reference Systems in the Philippines
B. The Philippine Triangulation Network  PTN
C. From PTN to the Philippine Reference System of 1992  PRS92

A. Types of Geodetic Datums
B. WGS84 and PRS92 Datum Differences
C. Transformation Techniques
D. The Bursa‐Wolfe Seven Parameter Transformation

Page 1
•Location: Southeast Asia
•7,107 islands
•Geographical Extents:
Latitude:  4˚15’ N ‐ 21˚25’ N
Longitude:  112˚15’E ‐ 127˚ E

• Total land area: 300,000 km2

Page 2
Luzon Datum Philippine Reference System of 1992
Luzon Datum of 1911 Modified Luzon Datum
Triangulation Network of the Philippines PRS92 Geodetic Control Network

Page 3
Luzon Datum of 1911
•Reference ellipsoid:
• Clarke Spheroid of 1866
• Semi‐major axis, a   6,378,206.4 
• Semi‐minor axis, b   6,356,583.8 
• Flattening, f   1/294.98

• Datum Origin:
• Fort Balanacan, Marinduque Island
Latitude:   13˚33’41 N
Longitude: 121˚52’03 E
• Reference direction  from south :
To station Baltasar is: α0  009° 12’ 37.000”
• Geoid‐spheroid separation   0

Page 3
Philippine Triangulation Network
•Established by the US Coast and Geodetic
Survey from 1901‐1942

•Network consisted of narrow chains of


quadrilaterals located mostly along the 
coastlines

Page 4
Modified Luzon Datum
•Retained original coordinates and orientation
of origin
•Geoid‐Spheroid separation  0.34m
•PRS92 geodetic control network established
using GPS technology
•Transformation parameters relating the GPS 
datum to the local horizontal geodetic system 

Page 5
based on location/orientation of origin
•Regional/Local Geodetic Datum
• Reference ellipsoid fits the surface of the 
Earth on a certain region or locality
• Origin of the coordinate system is the 
tangent point of the reference ellipsoid
and geoid
•Global Geocentric Geodetic Datum
• Reference ellipsoid fits the shape of the 
Earth globally
• Origin of the coordinate system coincide 
with the center of mass of the Earth

Page 6
World Geodetic System of 1984  WGS84
•Global geocentric geodetic datum
•Reference Ellipsoid:
• WGS84 Ellipsoid 
• Semi‐major axis, a   6,378,137 
• Semi‐minor axis, b   6,356,752.3142 
Flattening, f   1/298.257223563

Philippine Reference System of 1992  PRS92
•Local geodetic datum
•Reference Ellipsoid:
• Clarke Spheroid of 1866

Page 7
1. Seven Parameter  Bursa‐Wolfe  Transformation
• Assumes linear distortion within the network
• Uses 7 parameters  translation, rotation, scale
• Needs at least 3 points with coordinates in both datums and doing least squares 
fit.
2. Molodensky Transformation
• Uses 5 parameters  3 for datum shifts and 2 for differences in semi‐major axes 
and flattening
• Assumes internally consistent network
• Limited accuracy
. Multiple Regression Equation  MRE  Transformation
• Better fit for modelling non‐linear distortion  creates surface of distortion
• Appropriate for transforming continental size land areas
• Not to be extrapolated outside of area of intended use  large distortion over 
short distances
• Requires many points and very complex to derive

Page 8
• Transformation involving  three 
translations  X0, Y0, and Z0 , three 
rotations  Rx, Ry, and Rz  and scale  µ .

• The 3D rotation matrix describes the 
rotation of the coordinate system in 
order to become parallel to another 
coordinate system

Page 9
Depends on:

•Number of common points used to derive the 
parameters  redundancy for 
adjustment/refinement  
•Geometric distribution of the common points 
well distributed over the whole coverage 
area

•Consistency of the network  distortion within 
the network

Page 9
Parameters WGS84 to PRS92 PRS92 to WGS84
Translation X  ΔX 127.62195 ‐127.62195
Translation Y  ΔY 67.24478 ‐67.24478
Translation Z  ΔZ 47.04305 ‐47.04305
Rotation X  Rx ‐3.067062 3.067062
Rotation Y  Ry 4.90291 ‐4.90291
Rotation Z  Rz 1.57790 ‐1.57790
Scale  Sc 1.06002 ‐1.06002

Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
• Increasing trend is to shift from a local/regional geodetic 
datum to a geocentric geodetic datum  or relate to one .

• Datum transformation defines the relationship between the 
two datums.

• Transformation parameters facilitate the data integration 
from one datum to another. 

Page 1
• Assessment of the PRS92 Geodetic Control Network and Development of 
Recommended Guidelines for Primary Geodetic Control, Tidal and Geopotential 
Surveys – Final Report.  Research and Development in Support of the Implementation 
of the Philippine Reference System of 1992.  Training Center for Applied Geodesy and 
Photogrammetry.  University of the Philippines, 2009. 

• The Philippine Geodetic Network.  National Mapping and Resource Information 
Authority, 1992.

• World Geodetic System of 1984 – Its Definition and Relationships with Local Geodetic 
Systems. National Imagery and Mapping Agency Technical Report  TR8350.2 , Third 
Edition, Amendment 1, 9 January 2000.

Page 16

Você também pode gostar