Escolar Documentos
Profissional Documentos
Cultura Documentos
TABLE OF CONTENTS
INDEX
Table of Contents 1
Product Line Reference Guide 2
SWABBING EQUIPMENT
General Swabbing Guidelines 3
Swab Cup - Competitive Comparison Chart 4
Swab Cup - Information 5
Swab Cups - All Rubber 6
Swab Cups - Wire 7
Swab Cups - Casing 8
Swab Mandrels - Single & Double 9
Swab Mandrels - Casing 10
SWABBING ACCESSORIES
Rope Sockets & Wireline Flagging Material 11
TubularJars, Spang Jars & Sinker Bars 12
Safety Tools - Type "C" Releasing Attachment 13
Hydraulic Wireline Oil Savers 14
Hydraulic Wireline Oil Savers - Breakdown 15
Hydraulic Wireline Oil Savers - Star Pump 16
RIG ACCESSORIES
Tubing Strippers - Type TX-JU 17
Tubing Strippers - Type Hall 18
Tubing Spiders - Type TP 60 & Oil Country "G"
TP-60 G 19
Pipe Wipers 20
HANDLING TOOLS
Rod Guides 21
Sucker Rod Stripper & Rubbers 22
Sucker Rod Wrenches 23
Rod Hooks, Rod Elevators & Tong Dies 24
DOWNHOLE TOOLS
TM Mechanical Tubing Anchors 25
"F" Type Cup Testers 26
COMPANY POLICIES
Guarantee, Pricing & Returns 34
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
INDEX INDEX
PRODUCT LINE REFERENCE GUIDE
mplete Texas Products Well Service Division is a manufacturer of oilfield equipment and related products. This catalog features the most complete
ndustry line of swabbing products, accessories and drilling equipment in the industry. Our swab cups and packer cups are redefining the industry
r every performance standards that were once set by our competitors. The wide selection of swabs and cups assure the right combination for every
essory application - from light load, shallow well service to the heaviest loads and deepest wells. The Texas Products WSD line of accessory
equipment for workover rigs is the most durable and dependable in the industry.
2 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
1 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING EQUIPMENT
GENERAL SWABBING GUIDELINES
(4)
SCALE X X
(5)
PARAFFIN X X X X X X X
ROUGH TUBING X X X X
(5)
UNDERSIZED X X X X X X X
NOTES:
(1) All Rubber - refers to the cup construction; all cups have a aluminum or steel insert, but there is no metal in the rubber itself.
(2) Wire Reinforced - refers to cups that have steel wires embedded in the rubber.
(3) Fluid Load - refers to the column of salt water, with no gas help that can be safely lifted.
(4) Sand, Scale or any solids in the swabbing column should only be lifted using cups that will invert the lips of the cup when overloaded.
(5) Paraffin, Lined or Undersized tubing must be swabbed using Undersized cups that are made for the actual I.D. (minimum) of the tubing.
(6) This chart is designed for use with 2 3/8" tubing ONLY. When swabbing larger size tubing, a lighter load must be used. When swabbing
smaller size tubing, the guidelines above for 2 3/8" tubing are good.
Temperature Range
Since swab cups do not have a close fitting metal back-up behind the load, the effective temperature range is lower than the same
polymers when used in other applications. Most swab cups can swab effectively up to 200° F (93° C). Wire reinforced cups can
withstand more temperature than the “all rubber” cups.
Chemical Compatibility
Swab cups withstand the same chemicals as any standard oilfield elastomer. However, like all standard elasotmers solvents such
as Toluene, Xylene, Benzene, etc. will dissolve the rubber and usage in these chemicals is not recommended.
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 3
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING EQUIPMENT SWABBING EQUIPMENT
SWAB CUP - COMPETITVE COMPARISON CHART
Texas Products WSD is a manufacture, sales and service organization with a combined
knowledge of over 150 years of expertise in the oilfield industry. We have agents,
distributors and supply stores all over the world. Texas Products WSD manufactures all of
our swab cups in our facility located in Arlington, Texas (USA) and offer the most complete
line of competivitve, dependable products. Feel free to stop by anytime and take a tour of
our facility
facility.
DS, MISSION---
TYPE BM --- --- --- HSPC-MT LIGHT LOADS, MISSION TYPE
GHT LOADS,TX-MV
WITH SAND SK MV SV PL --- MEDIUM / LIGHT LOADS, WITH SAND
DS TX NUF
TX-NUF LK HPR M PH HSPC MT
HSPC-MT HEAVY LOADS
GEIGY, JET,
DS, WITH SOLIDS
TX-V RV V SD --- LIGHT LOADS, WITH SOLIDS
HSPC-HV
GHT LOADS,---WITH SAND SK --- --- PS --- MEDIUM / LIGHT LOADS, WITH SAND
701-2219 1 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING EQUIPMENT
TEXAS PRODUCTS WSD SWAB CUPS
Below is Texas Products WSD complete line of swab cups. Our swab cups have proven their
strength & durabilty in the field all over the world. Here you can find the best cup to perform any
type of well servicing job.
TX-TA TX-GW
The TX-TA is a medium-duty, all rubber, Introduced by Guiberson in 1940, the GW style
variable lip cup. The TX-TA is made from a swab cup has been perfected by Texas
slightly softer rubber for greater flexibility under Products WSD. The TX-GW seals so well it has
lighter loads. The TX-TA can be run on any become the industry standard for total fluid
swab mandrel and is available with either a removal. The TX-GW is a single lip cup,
steel or an aluminum bushing in all popular reinforced by molded-in steel spring wires, in
i
sizes. t bi
tubing i
size Th TX-GW
cups. The TX GW is i ideal
id l for
f
getting the last drop out of the well and may be
run on any swab mandrel.
TX-NUF TX-TUF
A dictionary defines enough as "sufficient; a The TX-TUF is a flexible rubber cup. Using a
necessary amount". That’s the TX-NUF; it’s unique method of attaching steel spring
sufficient for yyour swabbing
g jjob. The TX-NUF is reinforcingg wires along
g with a molded in valve
a high performance, heavy-duty, all rubber cup. ring. Thus making the TX-TUF very strong for
The unique design of the TX-NUF provides long lifting medium to heavy loads. Flexible enough
life, maximum lift capacity, even under heavy for light loads, allowing it to be used in both
loads and deep swabbing conditions, with a regular and undersized tubing. As the name
dynamic shape that falls very easily. The TX- implies, it’s tough!
NUF cup is made from the finest high strength,
abrasion resistant, low friction rubber. The TX- After many field tests running our TX-TUF cup versus
NUF is offered in a steel or aluminum bushing. Guiberson's "J" swab cup, the TX-TUF cup performs
The TX-NUF is available for both standard and better and lasts longerg at a fraction of the cost.
heavy wall tubing and may be run on any swab Therfore you get longer runs with the TX-TUF saving
mandrel. rig down time and money.
TX-MV TX-J
The TX-MV is a light duty, all rubber cup. The The TX-J is a very durable heavy duty cup with
multiple upturned lips pass easily through tight a long flexible lip to provide a perfect up-stroke
spots and are especially suited for fluid with a seal. The strong steel reinforcing wires are
high ratio of suspended sand because the lips secured by a rigid retaining ring, which keeps
will invert to dump an excessive load. The TX- the wires from snagging, even in the roughest
MV is available with either a steel or an tubing. Available in sizes 4 1/2" thru 5 3/4" .
aluminum bushing and can be run on any swab The TX-J cup is the toughest heavy load cup
mandrel. available.
TX-V TX-JS
The TX-V is a ring type, single lip, flexible, all The TX-JS casing swab cup is a heavy-duty
rubber cup molded on a steel bushing. The TX- cup, designed for lifting maximum loads from
V is ideal for lifting sand-laden fluids and for any depth. Its flexible lip provides a perfect up-
light load swabbing. The flexible TX-V falls stroke seal and automatically compensates for
quickly and automatically dumps excess loads. wear. This is the most dependable and durable
The number of TX-V cups may be varied to heavy load cup available. The TX-JS is similar
meet the swabbing conditions and can be run to the TX-J cup but with added flexibility to
on any swab mandrel
mandrel. provide a seal when lifting lighter loads. loads
Available in sizes 4 1/2" thru 5 3/4".
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 5
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING EQUIPMENT
TUBING SWAB CUPS
0.759
2.063" 3.25-3.40 1.751 1.700 - TP57842 1.720 - -
(1 3/4")
4.50 1.613 1.550 - - - TP87422 1.605
6 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
SWABBING EQUIPMENT
TUBING SWAB CUPS
1.315"
1.70-1.80 1.049 0.970 - - - - - -
(1")
1.660"
2.30-2.40 1.380 1.300 - - - - - -
(1 1/4")
1.900"
2.75-2.90 1.610 1.530 TP29641 1.520 0.688 - - -
(1 1/2")
2.000" 3.40 1.670 - - - - - - -
- - -
2.063" 3.25-3.40 1.751 1.700 TP31594 1.694
0.688 - - -
(1 3/4")
4.50 1.613 1.550 TP29641 1.520 - - -
2 3/8" 4.60-4.70 1.995 1.945 TP10716 2.000 1.094
TP68333 1.910 1.078
(2") 5.10-5.30 1.939 1.890 - - -
6.40-6.50 2.441 2.371 TP69845 2.360 1.350 TP10047 2.490 1.344
2 7/8" 9.35-9.50 2.195 2.130 - - -
TP64746 2.070 1.078
(2 1/2") 9.80-10.40 2.151 2.151 - - -
11.54-11.65 1.995 - TP68333 1.910 1.078 TP10716 2.000 1.094
8.50-10.20 2.979 - - - (TP61943) 2.797
9.20-9.50 2.992 2.920 TP14960 3.020
TP64846 2.890 1.350
3 1/2" 10.20-10.30 2.870 - -
1.344
(3") 12.80-13.30 2.764 - - - -
TP14082 2.770
12.70-12.95 2.750 2.687 - - -
14.90-15.5 2.602 - TP64781 2.570 1.344 - -
9.50 3.548 - - - - -
4" 1.094
10.80-11.95 3.476 3.395 - - - TP14036 3.526
* Undersize cup - for easier/faster falling; plastic line or internal upset tubing
() Trico Special
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 7
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING EQUIPMENT
CASING SWAB CUPS
OD WEIGHT TUBING ID PART CUP OD CUP ID PART PART CUP OD CUP ID PART CUP OD CUP ID
(IN.) (LB/FT) (IN.) NUMBER (IN.) (IN.) NUMBER NUMBER (IN.) (IN.) NUMBER (IN.) (IN.)
9.50 4.090
TP57467
4 1/2" 11.60 4.000 4.062 2.420 TP45597 TP61495 4.060 2.435 TP19841 4.180
TP93480**
12.60 3.958
2.400
13.75 3.958 TP57467 4.062 2.420 TP61495 4.060 2.435 TP19841 4.180
4 1/2" D.P.
16.60 3.826 S - - - - - - TP19840 4.020
4 3/4" 16.00 4.082 TP57467 4.062 2.420 TP45597 TP61495 4.060 2.435 TP19841 4.180
13.00 4.494
S - - - - - - TP19843 4.630
15.00 4.408
5" 2.410
18.00 4.276
S - - - - - - TP19842 4.490
21.00 4.154
13.00 5.044
TP88884* 4.970 2.420
14.00 5.012
TP57470 4.970 2.920 TP45829 TP61496 5.010
15.00 4.974 TP19846 5.140 2.910
2.435
5 1/2" 15.50 4.950 TP88884* 4.970 2.420
17.00 4.892
TP52384 - 4.838
20.00 4.778 S - -
TP19844 5.020 2.900
23.00 4.670 - - - -
14.00 5.290
S - - - - - - TP19847 5.440
5 3/4" 17.00 5.190
22.50 4.990 TP88884* 4.970 2.420 TP45829 TP61496 5.010 2.435 TP19846 5.140 2.910
14.00 5.552
6" S - - - - - - TP19848 5.670
20.00 5.352
20.00 6.049
22.00 5.989 S - - - - - - TP19850 6.240
6 5/8" 24.00 5.921
28.00 5.791
S - - - - - - TP19849 6.030
32.00 5.675
17.00 6.538
- - - TP19853 6.665
20.00 6.456
22.00 6.398 TP57471 6.475 3.545 -
23.00 6.366 - - -
24.00 6.336 TP19852 6.550
3.531
7" 26.00 6.276
- - - - - -
29.00 6.184
32.00 6.094
S - - - - - - TP19850 6.240
35.00 6.004
38.00 5.920
- - - - - - TP19849 6.030
40.00 5.836
26.40 6.969 TP19855 7.150
- - - - - -
29.70 6.875
7 5/8" -
33.70 6.765
- - - - - - TP19854 6.990
39.00 6.625
S - Indicates that this size swab cup is available by special order only.
* - Part number TP88884 is an alternate swab cup which is made to run in 5-1/2" casing on a 4-1/2" size swab mandrel.
** - Part number TP93480 is a heavy duty alternate to TP57467.
8 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
SWABBING EQUIPMENT
SINGLE KNUCKLE SWAB MANDRELS (SKM)
The specially designed SKM swab mandrels by Texas Products WSD can be used to run any of our all-
rubber or wire type swab cups. SKM swab mandrels are available in sizes from 1 1/2" thru 3 1/2". The
lower mandrels deep grooves provide a large external bypass for faster falling. Machined from one solid
piece of bar stock,
stock the relentlessness of the joints prevents separation and disassembly in the well.
well
Texas Products WSD swab mandrels are redefining the industry performance standards that was once
set for this type of swabbing equipment.
SUB
NOGO
LOWER
MANDREL
SWAB CUP
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 9
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING EQUIPMENT SWABBING EQUIPMENT
CASING KNUCKLE SWAB MANDREL (CKM)
The CKM knuckle joint swab was designed for optimum field performance with rapid access to the swab
cups. This three-piece swab mandrel has the heaviest payload of its class running 4 1/2" cups. We offer
a sleeve specifically designed for the CKM swab mandrel in order to run 5 1/2" cups. The only threads
are on the top sub,
sub thus eliminating rig down time to chase pipe threads familiar on other manufacture
manufacture's
s
swabs.
SLEEVE SLEEVE
SLEEVE SLEEVE
10 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
01-2219 1 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING ACCESSORIES
ROPE SOCKETS
Our Rope Socket is designed to provide a strong and simple connection between
the wireline and the sinker bar. The top and bottom of the rope socket have a
grooved fishing neck so that an overshot can grab hold. The swivel rope socket
allows for free 360° turning when the swab is loaded. Available for wireline sizes
1/2", 9/16" and 5/8" diameter.
11
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING ACCESSORIES
SPANG JARS
TUBULAR JARS
SINKER BARS
12 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
SWABBING ACCESSORIES
SAFETY TOOLS - TYPE "C" RELEASING ATTACHMENT
The Type "C" Rreleasing Attachment provides a safe, simple automatic release for
Texas Products WSD Wireline Oil Savers. The Type "C" locks the saver securely to
the tubing, lubricator, or rotating circulation head while tools are in the hole and
needs no adjustment in operation. It releases automatically when the rope socket
contacts the locking dog.
The Type "C" will not trip under pressure, nor will it leak while pulling swabs, core
barrels, or surveying instruments.
SEAL RING
LOWER COUPLING
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 13
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING ACCESSORIES SWABBING ACCESSORIES
HYDRAULIC WIRELINE OIL SAVERS
14 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
17-701-2219 1
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING ACCESSORIES
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 15
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
SWABBING ACCESSORIES SWABBING ACCESSORIES
HYDRAULIC WIRELINE OIL SAVERS
16 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
17-701-2219 1
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
RIG ACCESSORIES
The housing of the type 'TXJU' stripper is machined with a flanged bottom connection for easy
attachment of API flanges. Six 1 1/8" stud bolts transmit tubing load from the packing gland to the
housing. These bolts also provide the means of adjusting the packing rubber, allowing three inches of
travel for adjustment and take-up wear. The rubber may also be adjusted easily by backing off the stud
nuts and setting tubing weight on top of the stripper. The flat top provides a suitable base for any
Guiberson or type
yp "G" Oil Country
y Tubing
g Spider.
p TX-JU
TX JU TUBING STRIPPER
PARTS BREAKDOWN
TYPE TX-JU ENGINEERING DATA
STANDARD METRIC
API NOMINAL FLANGE SIZE & SERIES 6" 152.4 GLAND
3000 PSI 20000 kPa
CASING SIZE (IN. / mm) 5" - 7" 127 - 178
APPROX. WEIGHT ((LB / KG)) 280 127
OVERALL HEIGHT (IN. / mm) 17 1/8" 435
FLANGE OD (IN. / mm) 15" 381
FLANGE THICKNESS (IN. / mm) 1 7/8" 47.6
BOLT CIRCLE DIAMETER (IN. / mm) 12 1/2" 317.5 STUD
BOLT SIZE - 12 REQUIRED (IN. / mm) 1 1/8"
WORKING PRESSURE (PSI / kPa) 1500 10300
TEST PRESSURE (PSI / kPa) 3000 20700
MAX LOAD CAPACITY (TONS / KG) 40 36290
OPENING THRU STRIPPER (IN. / mm) 6 1/8" 155.58 STUD NUT
RJT GASKET API NUMBER R-45 ---
RJT GASKET PITCH DIAMETER (IN. / mm) 8 5/16" 211.14 TOP RUBBER
SUPPORT
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 17
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
RIG ACCESSORIES RIG ACCESSORIES
HALL STRIPPER
STRIPPER RUBBERS
18 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
1 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
RIG ACCESSORIES
TP-60 TUBING SPIDER
The newly re-designed TP-60 Tubing Spider from Texas Products WSD is
ruggedly handsome. It's fast, safe, dependable and requires only one-man to
operate. It is totally interchangeable with both the Guiberson T-60 & Oil Country
Type G Spiders. The TP-60 accomodates pipe sizes ranging from 1" (1.315")
thru 4 1/2" tubing with an even load distribution. With it's positive rotation grip the
TP 60 provides automatic alignment.
TP-60 alignment Making the TP-60
TP 60 Tubing Spider the most
versatile Tubing Spider on the market.
TUBING QTY
PART NUMBER PART DESCRIPTION
SIZE (IN.) REQUIRED
TP-60 TUBING SPIDER ASSEMBLIES
TP62454 2 7/8 SPIDER ASSEMBLY, W/ PLAIN GATE, AIR VALVE, 2 7/8" SLIP BODY (LESS INSERTS) 1
TP67580 2 7/8 SPIDER ASSEMBLY, W/ PLAIN GATE, 2 7/8" SLIP BODY (LESS AIR VALVE & INSERTS) 1
TP62458 3 1/2 SPIDER ASSEMBLY, W/ PLAIN GATE, AIR VALVE, 3 1/2" SLIP BODY (LESS INSERTS) 1
TP67581 3 1/2 SPIDER ASSEMBLY, W/ PLAIN GATE, 3 1/2" SLIP BODY (LESS AIR VALVE & INSERTS) 1
TP83099 4 1/2 SPIDER ASSEMBLY, W/ PLAIN GATE, AIR VALVE, 4 1/2" SLIP BODY (LESS INSERTS) 1
TP83100 4 1/2 SPIDER ASSEMBLY, W/ PLAIN GATE, 4 1/2" SLIP BODY (LESS AIR VALVE & INSERTS) 1
TP-60 REPLACEMENT SLIP BODIES
TP62461 2 7/8 SLIP BODY ASSEMBLY,TYPE TP-60, 1.315" - 2 7/8" (LESS INSERTS) 1
TP62462 3 1/2 SLIP BODY ASSEMBLY,TYPE
, TP-60,, 3 1/2" ((LESS INSERTS)) 1
TP-60 REPLACEMENT INSERT KITS
TP62474 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 1.315" 18
TP62475 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 1.660" 18
TP62476 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 1.990" 18
TP62478 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 2.063" 18
TP42586 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 2 3/8" 18
TP42587 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 2 7/8" 18
TP42588 3 1/2 INSERT KIT, TP-60 SLIP BODY, 3 1/2" X 3 1/2" 18
OIL COUNTRY TYPE G REPLACEMENT SLIP BODIES
TP61003-100
TP61003 100 3 1/2 SLIP BODY ASSEMBLY,
ASSEMBLY OIL COUNTRY TYPE G, G 3 1/2" (LESS INSERTS) 1
TP61039-100 4 1/2 SLIP BODY ASSEMBLY, OIL COUNTRY TYPE G, 4 1/2" (LESS INSERTS) 1
OIL COUNTRY TYPE G REPLACEMENT INSERT KITS
TP61041-103 3 1/2 INSERT KIT, OIL COUNTRY TYPE G SLIP BODY, 3 1/2" X 1.660" 3
TP61041-104 3 1/2 INSERT KIT, OIL COUNTRY TYPE G SLIP BODY, 3 1/2" X 1.990" 3
TP61041-105 3 1/2 INSERT KIT, OIL COUNTRY TYPE G SLIP BODY, 3 1/2" X 2.063" 3
TP61006-101 3 1/2 INSERT KIT, OIL COUNTRY TYPE G SLIP BODY, 3 1/2" X 2 3/8" 3
TP61006-102 3 1/2 INSERT KIT, OIL COUNTRY TYPE G SLIP BODY, 3 1/2" X 2 7/8" 3
TP61006-103 3 1/2 INSERT KIT, OIL COUNTRY TYPE G SLIP BODY, 3 1/2" X 3 1/2" 3
TP61040-101 4 1/2 INSERT KIT,
KIT OIL COUNTRY TYPE G SLIP BODY,BODY 4 1/2" X 3 1/2" 3
TP61040-102 4 1/2 INSERT KIT, OIL COUNTRY TYPE G SLIP BODY, 4 1/2" X 4" 3
TP61040-103 4 1/2 INSERT KIT, OIL COUNTRY TYPE G SLIP BODY, 4 1/2" X 4 1/2" 3
GUIBERSON T-40 REPLACEMENT INSERT KITS
TP62480 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 1.315" 12
TP62481 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 1.660" 12
TP62482 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 1.990" 12
TP62484 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 2.063" 12
TP42597 2 7/8 INSERT KIT, TP-60 SLIP BODY, 2 7/8" X 2 3/8" 12
TP42598 2 7/8 INSERT KIT, TP
TP-60
60 SLIP BODY, 2 7/8
7/8" X 2 7/8
7/8" 12
TP42599 3 1/2 INSERT KIT, TP-60 SLIP BODY, 3 1/2" X 3 1/2" 12
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 19
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
RIG ACCESSORIES RIG ACCESSORIES
LOW PROFILE - PIPE WIPERS
Texas Products WSD low profile pipe wipers remove mud and debris from the pipe while it is
being pulled or run. It's nine inch rubber wiper disc encircles the pipe tightly and covers the
annulus to prevent foreign objects from falling into the well. The wiper disc is contained
within a fabricated steel frame which mounts beneath the spider or rotary table.table Ideal for
workover operations, the assembly is conveniently sized, inexpensive and built to carry the
load.
SINGLE pipe wipers have a hard rubber ring molded near the outer surface to prevent the
wiper from being pulled through the master bushing.
DUAL SOLID pipe wipers are molded with two (2) hard rubber rings for reinforcement. Dual
wipers provide a flexible double lip where oversize tool joints and protectors are used . Their
wide slots allow mud to drain easily.
DUAL Split pipe wipers have two (2) metal rings molded inside to allow the wiper to split and
wrap around drill pipe when using a solid master bushing.
20 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
1 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
HANDLING TOOLS
NYLON ROD GUIDES
Reduce rod wear, tubing wear, and lifting costs with Texas Products WSD Nylon
Rod Guides. They reduce rod wear and tubing wear by acting as wear resistant
bushings that space the rod couplings away from the tubing bore. They reduce
lifting costs by helping the rods fall straight,
straight without buckling,
buckling for a longer
pumping stroke.
In the field, installing our Nylon Guides on the rod is easy. Their diagonal slots
slip over the rod, then snap into place using a 24" (IN.) pipe wrench. The open
jaws of the pipe wrench will span opposite ends of a guide and leverage on the
wrench handle will snap the Guide on to the rod.
Texas Products WSD Rod Guides have more wear surface and last longer than
most competitors in the industry.
industry Our quality assurance program ensures
reliabilty and integrity on all of our Rod Guids. SUCKER ROD
SPECIAL NOTE:
In cold weather our nylon guides can be warmed in boiling water to make them more
pliable. When installing guides in older wells, it is suggested to insert a pony rod below the
lowest guide to raise all couplings and guides above any worn spots in the tubing.
RUBBER GUIDE
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 21
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
HANDLING TOOLS HANDLING TOOLS
SUCKER ROD STRIPPER
Texas Products WSD adjustable Sucker Rod Stripper works when pulling or running rods or
pipe. Packing elements strip oil and paraffin from rods or piping of any size, as they are
being pulled. This action not only promotes a cleaner and safer working environment, but
also saves time and money during pulling operations
CAP
HOUSING HOUSING
STRIPPER RUBBERS
Two types of packing are available for this stripper. The TP-2WR packing, being a medium
hard rubber and is used to strip all sizes of rods whether in combination strings or not. Then
there's the TP-3WR packing, which is a soft rubber and can be ordered in any of the
following three models: TP-3WR for all sucker rods; TP-3WR-1 for 1" pipe, and TP-3WR-2
for 1 1/4" & 1 1/2" pipe.
22 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
1 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
HANDLING TOOLS
TRICO STYLE SUCKER ROD WRENCHES
Texas Products WSD carries Trico style Sucker Rod Wrenches These wrenches are made
of high quality heat treated alloy steel and feature a smooth "snap-up" hammer action to
quickly break the toughest rod or coupling joint.
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 23
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
HANDLING TOOLS HANDLING TOOLS
TRICO STYLE ROD HOOK
The Trico style Rod Hook is designed with a load rating of 25 tons. The specially designed
"snap-in" latch mechanism lets the rod elevator bail hook in without the operator releasing
the latch, while the bail is held securely in place until released.
PARTHOUSING
NUMBERS & INFORMATION
HEAVY-LIFT SHORT SNAP-IN ROD HOOK
SCREW &
PART NUMBER
HANDLE PART DESCRIPTION
24 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
1 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
DOWNHOLE TOOLS
TM MECHANICAL TUBING ACHORS
The TM Anchor/Catcher is a retrievable positive action anchor tool to hold tubing strings in tension or
compression during pump strokes to prevent tubing buckling. This increases pumping efficiency while
reducing rod and tubing wear. This tool also catches the tubing should it part. Stainless steel drag
springs employ low stress value to minimize failure under corrosive conditions.
conditions If the TM
Anchor/Catcher cannot be released with right-hand rotation, it is equipped with a shear release
activated by an upward pull.
SPECIAL FEATURES
* Stainless steel drag springs
* Enclosed slips
* Rotation or shear release
* Safety release value easily adjusted
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 25
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
DOWNHOLE TOOLS DOWNHOLE TOOLS
The cup tester assemblies are rated to the API standard mill test
pressure for casing sizes up to 10,000 psi. Special reinforcing can be
offered on all cup sizes and casing weight ranges to hold up to 15,000
psi. Texas Products WSD has the sizes, pressure ratings and
ti
connections ffor every single
i l one off your jjobs.
b
P Texas Products WSD cup tester assemblies come standard with internal F-TYPE CUP
flush (IF) connections. Other connections are available at an additional
cost. When ordering please specify (1) the casing size & weight per foot
O-RING
or (2) the part number or (3) the OD, ID, and drift diameter.
Anytime
y the "F" type
yp cupp tester is used;; care should be taken to ensure SUB
that the drill pipes load capacity is not exceeded. This can be checked
by adding the weight of the suspended pipe to the vertical load due to
pressure. To find this multiply the cup pressure area (IN.²) by the
pressure. The table below shows the total load capacity for each size
tester. VIEW
INTERIOR ASSEMBLY VIEW INTERIOR VIEW
26 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
1 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
PACKER CUPS & ASSEMBLIES
GENERAL DOWNHOLE ENVIRONMENT COMPATIBILITY
This chart offers a general guideline for the use of various elastomers
in downhole oilfield applications. See the notes below the chart for
some of the specific assumptions and discussion.
AL RUBBER
NOTES (SEE
E (A)
E (B)
ENE
HNBR ((C)
HNBR ((D)
EPDM ((E)
VITON / F
(
NATURA
NEOPRE
NITRILE
NITRILE
HYDRIN
AFLAS
STANDARD OILFIELD SERVICE (2) OK / ? OK OK OK OK OK NR OK OK OK
SOUR SERVICE (H2S) NR NR NR ? (3) OK (3) ? OK OK OK NR
DOWNHOLE-ENVIRONMENT
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 27
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
PACKER CUPS & ASSEMBLIES PACKER CUPS & ASSEMBLIES
GW-SS 2 CUP PACKER TECHNICAL DRAWING
L MANDREL
THIMBLE
SLEEVE
R ADAPTER
28 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
Fax 817-701-2219 1
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
PACKER CUPS & ASSEMBLIES
GW PACKER CUP - PRODUCT LINE
The new and improved streamlined packer cup series was NEW "GW" SERIES RATINGS
established over ten years ago and is now set for a global takeover. CUP 0 - 150° F 250° F 350° F 450° F 550° F
In addition to expanding, improving and streamlining the standard PSI PSI
GW-SS 4500 3250 --- --- ---
packer / swab cups, Texas Products WSD new "GW" series product
line includes: Heavy-Duty, Extra Heavy-Duty and Hi-Temp Steam
cups in all casing sizes. GW-HD 8000 PSI 6500 PSI --- --- ---
GW-HD
8500 PSI 7000 PSI 5000 PSI --- ---
Texas Products WSD is becoming one of the most reputable, sought (HNBR)
after rubber producers in the oilfield. The new "GW" series product
line is the most reliable cup the industry has to offer, while exceeding
GW-ST 4500 PSI 4000 PSI 3250 PSI 2500 PSI 1500 PSI
all of our competitors packer cups. In fact these cups are so reliable
even our competitors have had a taste. GW-SP 6000 PSI 3000 PSI --- --- ---
The question is, how do you improve on a basic product line that has GW-SS
been around since 1941? With a tremendous amount of oilfield The standard "GW" packer cup, molded using a very tough 80
knowledge and experience, along with our design capabilities that durometer proprietary nitrile rubber compound. The "GW-SS" is
our OEM group has. First you review the problems that you have ran reinforced by loop-formed spring steel wires. This cup is for standard,
into in the past, then we systematically eliminate them in the new limited pressure, moderate temperature service.
product.
GW-HD
The new "GW" series packer cups have an improved seal on the I.D. A heavy-duty "GW" packer cup, molded using an extra strong 85
of the cup. In the past many users of the "historical" cups had to durometer proprietary nitrile rubber compound. Rather than wire
incoporate an o-ring on their mandrels to get them to seal. With our reinforcing, the "GW-HD" uses a heavy-duty insert made with a
design improvements that have been made, this new series of cups double row of overlapping spring steel plates to provide the strongest
seal on the mandrel when the assembly is tightened. This has been reinforcement.
tested in an independant laboratory as well as in the field with
outstanding results. GW-HD (HNBR)
The extra heavy-duty "GW" packer cup uses the same heavy-duty
New rubber compounds have been developed which add to the overlapping spring steel plate reinforcement as the "GW-HD".
strength of the new "GW" series. We are very proud of the Molded using an extremely durable 85 durometer proprietary
temperature and pressure ratings that this new series of cups can hydrogenated nitrile rubber compound. The HNBR rubber provides
withstand, especially the new "GW-HD" (HNBR) cups that utilize an better chemical resistance and a higher operating temperature than
extremely rugged HNBR rubber compound standard nitrile. The "GW-HD" (HNBR) can be used in wells with up
to 15% H2S and temperatures up to 350° F.
For each casing size (4 1/2" & larger) the new "GW" series cups
have been designed to function in one weight range larger or smaller GW-ST
than the weight range listed for the cups. This allows for use with A hi-temp steam "GW" packer cup, molded using a special 85
mixed casing weights in the well and/or when casing weight is durometer proprietary EPDM rubber compound. This compound
doubtful in older wells. Even though each cup will function in another utilizes technology developed for the "Hot Rock Geothermal Project"
weight range, this is not recommended as a normal practice due to by the U.S. Department of Energy in New Mexico a few years back
some pressure holding limitations that may exist. when alternate energy sources were first being sought. The "GW-ST"
uses the heavy-duty overlapping spring steel plate reinforcement and
With this being the newest product line on the market today, design the special rubber compound allows this cup to be used in water or
changes to the cups can always be made. The possibliltiy to make steam up to 550° F. This cup must never be used in liquid hydro-
design adjustments to the new "GW" series packer cups is always carbons. EPDM swells dramatically in oil or grease.
there in order to reduce complication of selecting the appropriate cup
for the proper application. Since there wasn't a group of rubber molds
to use already, there are only two cups for any size casing. In some GW-SP
cases the "historical" cups were designed for certain weight ranges The "GW-SP" (special packer) cup, is bacically the smae make and
as "after-thoughts", while in other cases the weight ranges that are configuration as the "GW-SS". However, this cup contains additional
specified for the "historical" cups are not even used in todays oilfield. I.D. seals (o-rings) and a thick cross section for added durability.
However, even with the improvements to the new streamlined "GW"
series, all of these cups are interchangeable with the "historical" GW
GW-SC
series produced by the Guiberson group.
The "GW" swab cup also known as "GW-SC", is the cup to use when
lifting the last drop from a well. In tubing sizes 2 3/8" - 4" the swab
cup and the "GW-SS" cup are the same; with the same wire-loop
reinforcing and the same tough nitrile rubber. In casing size cups 4
1/2" and larger) the "GW-SC" is molded from the same tough nitrile
rubber as the "GW-SS", but there are no wires in the "GW-SC"
casing cups.
PACKER ASSEMBLIES
A "GW" packer assemblies parts list is included in this catalog.
Please reference the "PACKERS" section of this catalog.
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 29
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
PACKER CUPS & ASSEMBLIES PACKER CUPS & ASSEMBLIES
GW SERIES PACKER CUPS - DIMENSIONAL DATA
ENGINEERING DATA AND PART NUMBERS
MAJOR MINOR SLEEVE INSIDE MAJOR MINOR SLEEVE INSIDE
EAL O.D. O.D. O.D.WEIGHT O.D. GW-SSI.D. GWD-HD
HEIGHT GWD-HD GW-ST GW-SC GW-SEAL O.D. O.D. O.D. I.D. HEIGHT
NG) (IN.) (IN.) (IN.)(LB/FT)(IN.) (NITRILE)
(IN.) (NITRILE)
(IN.) (HNBR) (EPDM) (NITRILE) (O-RING) (IN.) (IN.) (IN.) (IN.) (IN.)
2.0502 3/8 1.900 4.60-4.70
1.280 TP10716
1.090 0.960
--- --- --- TP10716 --- 2.050 1.900 1.280 1.090 0.960
2.5002 7/8 2.330 6.40-6.50
1.540 TP10047
1.340 1.320
--- --- TP87307 TP10047 --- 2.500 2.330 1.540 1.340 1.320
3.1253 1/8 3.000 --- 2.125 TP16370 1.937 1.000
--- --- --- --- --- 3.125 3.000 2.125 1.937 1.000
3.050 2.830
9.20-10.20
1.530 TP14960
1.340 1.330
--- --- TP87310 TP14960 --- 3.050 2.830 1.530 1.340 1.330
[LARGE I.D.] TP16146 --- --- --- --- ---
3.0503 1/2 2.830 2.160 1.940 1.330 3.050 2.830 2.160 1.940 1.330
[KOBE] TP61943 --- --- --- ---
2.840 2.510
12.95-13.30
1.530 TP14082
1.340 1.330
--- --- TP87311 TP14082 --- 2.840 2.510 1.530 1.340 1.330
4 9.50-11.60 --- ---
3.630 3.250 2.160 TP14036
1.940 1.330 TP87312 TP14036 --- 3.630 3.250 2.160 1.940 1.330
4 1/2 21.50-23.70 --- ---
4 1/2 9.50-12.60
4.180 5 3.770 2.650 TP30509
23.20-24.10 2.400 1.510
TP54864 TP54864-001 TP87313 TP19841 --- 4.180 3.770 2.650 2.400 1.510
5.5 35.30-38.00
4 1/2 13.50-18.90
4.020 3.510 2.640 TP10430
2.400 1.510
TP54430 TP54430-001 TP87314 TP19840 --- 4.020 3.510 2.640 2.400 1.510
5 1/2 40.50-43.10
5 13.00-15.00
4.630 4.190 2.640 TP25389
2.410 1.560
TP54865 TP54865-001 TP87315 TP19843 --- 4.630 4.190 2.640 2.410 1.560
5 1/2 26.80-29.70
5 18.00-23.20
4.490 3.850 2.640 TP17831
2.410 1.560
TP54866 TP54866-001 --- TP19842 --- 4.490 3.850 2.640 2.410 1.560
5 1/2 32.60-35.30
48 5.140 4.700
13.00-17.00
3.310 TP22625
2.910 TP54753
1.630 TP54753-001 TP87318 TP19846 TP30848 5.140 4.700 3.310 2.910 1.630
5 1/2
46 5.020 4.420
17.00-23.00
3.270 TP19711
2.900 TP54760
1.640 TP54760-001 TP87316 TP19844 TP30846 5.020 4.420 3.270 2.900 1.640
5 3/4 14.00-17.00
47 5.440 4.950 3.270 TP14714
2.910 1.660
TP54714 TP54714-001 TP87335 TP19847 TP30847 5.440 4.950 3.270 2.910 1.660
6 20.00
6 15.00-18.00
5.670 5.190 3.270 TP14721
2.910 1.660
--- --- TP87336 TP19848 --- 5.670 5.190 3.270 2.910 1.660
7 46.40-53.60
6 5/8 20.00-24.00
51 6.240 5.650 4.020 TP19389
3.530 TP54872
1.560 TP54872-001 TP87319 TP19850 TP30851 6.240 5.650 4.020 3.530 1.560
7 32.00-35.00
6 5/8 28.00-32.00
50 6.030 5.500 4.020 TP19277
3.530 1.560
TP54870 TP54870-001 TP87320 TP19849 TP30850 6.030 5.500 4.020 3.530 1.560
7 38.00-42.70
7 17.00-20.00
54 6.650 6.050 4.030 TP17819
3.530 TP54819
1.680 TP54819-001 TP87322 TP19853 TP30854 6.650 6.050 4.030 3.530 1.680
7 5/8 42.80-45.30
7 23.00-29.00
53 6.550 6.000 4.030 TP17462
3.530 1.680
TP54796 TP54796-001 TP87323 TP19852 TP30853 6.550 6.000 4.030 3.530 1.680
7 5/8 47.10-51.20
7.150 6.600
26.40-29.70
4.030 TP19391
3.530 TP54826
1.680 TP54826-001 TP87338 TP19855 --- 7.150 6.600 4.030 3.530 1.680
7 5/8
6.990 6.350
33.70-39.00
4.030 TP23051
3.530 TP54825
1.680 TP54825-001 TP87339 TP19854 --- 6.990 6.350 4.030 3.530 1.680
21 7.486 7.290 26.004.030 TP16009
3.530 TP54827
1.680 TP54827-001 TP87324 --- TP93421 7.486 7.290 4.030 3.530 1.680
8
7.310 7.180 28.204.030 TP16110
3.530 1.680
--- TP54826-006 --- --- --- 7.310 7.180 4.030 3.530 1.680
10 8.230 7.600
28.00-36.00
5.030 TP16111
4.530 1.680
--- --- TP87326 --- TP16110 8.230 7.600 5.030 4.530 1.680
8 5/8
14 8.040 7.300
40.00-49.00
5.030 TP16115
4.530 1.680
--- --- TP87327 --- TP16114 8.040 7.300 5.030 4.530 1.680
9 40.00-45.00
42 8.3808 5/8 7.700 24.005.030 TP159414.530 ---
1.680 --- --- --- TP15942 8.380 7.700 5.030 4.530 1.680
9 5/8 64.90-75.60
70 9.180 8.400
36.00-43.50
5.040 TP10354
4.530 TP54354
1.680 TP54354-001 TP87329 --- TP14970 9.180 8.400 5.040 4.530 1.680
9 5/8
71 8.960 8.160
47.00-53.50
5.030 TP33850
4.530 TP54850
1.630 TP54850-001 TP87330 --- TP14971 8.960 8.160 5.030 4.530 1.630
10.450 9.400
32.75-55.50
5.030 TP13197
4.530 TP54034
1.680 TP54034-001 TP87331 TP19034 --- 10.450 9.400 5.030 4.530 1.680
10 3/4
10.040 9.100
55.50-65.70
5.030 TP13198
4.530 TP54198
1.680 TP54198-001 TP87332 --- --- 10.040 9.100 5.030 4.530 1.680
11.380 10.540
38.00-60.00
5.030 TP14246
4.530 TP54296
1.680 TP54296-001 TP87333 --- --- 11.380 10.540 5.030 4.530 1.680
11 3/4
11.060 10.350
60.00-65.00
5.030 TP14247
4.530 TP54297
1.680 TP54297-001 TP87335 --- --- 11.060 10.350 5.030 4.530 1.680
12.980 13 3/812.200
48.00-72.00
6.030 TP16298
4.530 TP54298
1.750 TP54298-001 TP87334 --- --- 12.980 12.200 6.030 4.530 1.750
15.530 16 14.310 65.00-109.0
8.270 TP16299
4.530 TP54299
2.500 TP54299-001 TP87336 --- --- 15.530 14.310 8.270 4.530 2.500
18.070 18 5/816.380
87.50-94.00
8.270 TP18299
4.530 TP54189
2.500 TP54189-001 TP87337 --- --- 18.070 16.380 8.270 4.530 2.500
19.560 20 17.520 78.60-135.0
--- TP20010
4.530 TP56200
2.000 TP56200-001 TP97355 --- --- 19.560 17.520 --- 4.530 2.000
* FHD-GW: For a Heavy Duty Flurocarbon Cup, replace "-001" with "-003" (ex. TP54864-001 becomes TP54864-003).
P54864-003).
e a smaller ** SEAL-GW:
I.D., but if an o-
Has a smaller I.D. with o-ring for sealing insurance; on cups 10 3/4" & larger they do not have a smaller I.D., but if an o-
ring is desired add a -007 to the base part number (ex. TP14246 becomes TP14246-007
30 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
The "CP" type casing packer cup is a one piece unit designed for use between casing strings.
The "CP" is used to seal liner or the inner casing string and to protect low pressure productive
sands during cementing, acidizing and similar operations. Made from oil resistant compounds
developed in rubber laboratories especially for oilfield use, the "CP" cup is reinforced with spring
steel wires and a steel bushing, molded in as an integral part of the cup. The "CP" cup may be
run facing up or down as required and is easily assembled by slipping it over a joint of inner
casing or liner and securing it with set screws or by welding.
NOTES:
All cups are molded from a tough, oil resistant nitrile rubber, EXCEPT thoserated for "Hi-Temp Steam". Cups designated as "Hi-
T
Temp St
Steam"" are made
d from
f a tough
t h EPDM rubber
bb and d is
i rated
t d for
f up to
t 550° F usage. All "CP" cups may beb run either
ith facing
f i
upward or downward with equal performance. All cups may be secured to the inner pipe string (seals on) using either the set
screws furnished with the cup or by welding. In either case, the o-ring (furnished) should always be installed to produce more
secure sealing between the two pipe strings. Sizes other than those shown in the chart above may be ordered by special request.
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 31
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
PARTS & ACCESSORIES PARTS & ACCESSORIES
GUIBERSON TYPE BOP RUBBERS
EMENT PARTS
KELLY VALVE REPLACEMENT PARTS GATE VALVE REPLACEMENT PARTS
OEM TYPE OEM TYPE
T.I.W. CAMERON
OMSCO SHAFFER
HYDRIL
GRAY
Items listed herein are not categorized in our current catalog. Please contact one of our
sales representatives for a quote and further information.
Texas Products WSD is not affiliated, nor a representative of any of the OEM's listed herein.
The replacement parts described are manufactured by or for Texas Products WSD, and are
not sponsored or authorized by any of the OEM's listed herein.
32 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
01-2219 1 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
PARTS & ACCESSORIES
RING GASKETS
Texas Products WSD carries a large quantity of API soft iron Ring Gaskets that are widely
used in the oil and gas industry. These Ring Gaskets come in 3 different series made of low
carbon steel or stainless steel for use with H2S services. Each Ring Gasket meets API
standards and is adaptable to any flange
standards, flange.
"R"
(OVAL)
PART NUMBERS & INFORMATION
"R" STYLE RING GASKETS
PART FLANGE PSI
RING SIZE
NUMBER SIZE (IN.) RATING
TP280-200 R-20 1 1/2 2/5M
TP280-230 R-23 2 2M
TP280 240
TP280-240 R 24
R-24 2 3/5M "R"
(OCTAGONAL)
TP280-260 R-26 2 1/2 2M
TP280-270 R-27 2 1/2 3/5M
TP280-310 R-31 3 2/3M
TP280-350 R-35 3 5M
TP280-370 R-37 4 2/3M
TP280-390 R-39 4 5M
TP280-410 R-41 5 2/3M
TP280-440 R-44 5 5M "BX"
TP280-450
TP280 450 R-45
R 45 6 2/3M
TP280-456 R-45/46 6 3/5M
TP280-460 R-46 6 5M
TP280-490 R-49 8 2/3M
TP280-495 R-49/50 8 3/5M
TP280-500 R-50 8 5M
TP280-530 R-53 10 2/3M "RX"
TP280-534 R-53/54 10 3/5M
TP280-540 R-54 10 5M
TP280-570 R-57 12 2/3M
TP280-650 R-65 16 2M
TP280-656 R65/66 16 2/3M
TP280-660 R-66 16 3M
TP280-690 R-69 18 2M
TP280-730 R-73 20 2M "COMBO"
TP280-734 R-73/74 20 2/3M
TP280-740 R-74 20 3M
TP280-910 R-91 10 10M
"RX" STYLE RING GASKETS "316 SS" "BX" STYLE RING GASKETS "316 SS"
PART FLANGE PSI PART PART FLANGE PSI PART
RING SIZE RING SIZE
NUMBER SIZE (IN.) RATING NUMBER NUMBER SIZE (IN.) RATING NUMBER
TP285-200 RX-20 1 1/2 2/5M TP287-200 TP295-150 BX-150 1 11/16 10/15M TP297-150
TP285-240 RX-24 2 3/5M TP287-240 TP295-151 BX-151 1 13/16 10M TP297-151
TP285-270 RX-27 2 12 3/5M TP287-270 TP295-152 BX-152 2 1/16 10M TP297-152
TP285-310 RX-31 3 2/3M TP287-310 TP295-153 BX-153 2 9/16 10/15/20M TP297-153
TP285-350 RX-35 3 5M TP287-350 TP295-154 BX-154 3 1/16 10M TP297-154
TP285 370
TP285-370 RX 37
RX-37 4 2/3M TP287 370
TP287-370 TP295 155
TP295-155 BX 155
BX-155 4 1/16 10M TP297 155
TP297-155
TP285-390 RX-39 4 5M TP287-390 TP295-156 BX-156 7 1/16 10M TP297-156
TP285-410 RX-41 5 2/3M TP287-410 TP295-157 BX-157 9 10M TP297-157
TP285-440 RX-44 5 5M TP287-440 TP295-158 BX-158 11 10M TP297-158
TP285-450 RX-45 6 2/3M TP287-450 TP295-159 BX-159 13 5/8 10M TP297-159
TP285-456 RX-45/46 6 3/5M TP287-456 TP295-160 BX-160 13 5/8 5M TP297-160
TP285-460 RX-46 6 5M TP287-460 TP295-161 BX-161 16 3/4 5M TP297-161
TP285-490 RX-49 8 2/3M TP287-490 TP295-162 BX-162 16 3/4 10M TP297-162
TP285-500 RX-50 8 5M TP287-500 TP295-165 BX-165 21 1/4 5M TP297-165
TP285-530 RX-53 10 2/3M TP287-530 TP295-166 BX-166 21 1/4 10M TP297-166
TP285-540 RX-54 10 5M TP287-540
TP285-570 RX-57 12 2/3M TP287-570 BX and RX Ring Gaskets are for extreme pressure service.
TP285-650 RX-65 16 2M TP287-650 Pressure actuates these Gaskets, the higher the pressure, the
TP285-660 RX-66 16 3M TP287-660 tighter the seal.
TP285-730 RX-73 20 2M TP287-730
TP285-740 RX-74 20 3M TP287-740 Combination Gaskets are designed for Ring Joints in which the
mating flanges have different ring grooves.
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 33
Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1
COMPANY POLICIES COMPANY POLICIES
TERMS & CONDITIONS
GUARANTEE
Unless otherwise specifically stated in writing, our guarantee is limited to the following:
e in material or
We agree to repair or replace at our cost all products of our manufacture, that are found by us to be defective in material or
from ourworkmanship,
plan. provided that notice of claim of defects is received by us within one year after date of shipment from our plan.
We shall hold all products claimed to be defective subject to inspection by TPWSD.
tent andGoods
in the or parts thereof which are not wholly or our manufacture are warranted and guaranteed only to the extent and in the
such warranty
manner warranted and guaranteed to us by the manufacturer and then only to the extent we are able to enforce such warranty
or guarantee.
m, and we
Wearehave the option of requiring the return of the defective material, transportation prepaid, to establish the claim, and we are
from usnot
to the
obligated to pay the cost of transporting the goods replaced or repaired by us either from the Buyer to us or from us to the
Buyer.
cture, material,
In no event, shall we be liable for any claims of damages of any kind arising out of alleged defects in manufacture, material,
design or workmanship in the goods sold.
The above provisions set forth are our sole and only obligation or liability in connection with goods sold by us.
PRICES
RETURNS OF MERCHANDISE
ON, TEXAS or to return any and all materials have to be obtained from TEXAS PRODUCTS WSD, INC. ARLINGTON, TEXAS or
Authority
other regional office as designated. The following terms and conditions will apply:
1. List of material submitted for return must show date of purchase and invoice or purchase order.
2. Material, as listed below, is not acceptable for credit:
onditioned only A) a) Material not in new or saleable condition, any material returned not in sellable condition will be reconditioned only
g. if our inspection determines it feasible to do so. An appropriate charge will be made for reconditioning.
B) Material with damaged threads or wrench marks will not be accepted.
C) Material purchased prior to twelve (12) months of date of return.
D) Material purchased from others.
E) Obsolete material.
sed more than F) Material made special or to non-standard specifications Rubber products which have been purchased more than
twelve (12) months prior to date of return.
date or invoice
3. Credit will be based on prices in effect at time of shipment or current prices, whichever is less. If purchase date or invoice
number is not furnished, we reserve the right to determine what price basis credit will be allowed.
5. All transportation charges, inbound and outbound, will be for our customer’s account.
S PRODUCTS
6. After receipt of material credit will be issued. This credit shall be applicable to the future purchase of TEXAS PRODUCTS
d to handle
WSD,theINC. products only. Due to the details involved in processing, a period of 30 to 60 days may be required to handle the
credit. A debit memorandum will not be accepted for return of merchandise.
ed on all7.items
A 25% restocking charge, over and above any reconditioning charge, which may be applicable, will be charged on all items
returned for credit.
CANCELLATION CHARGES
1. Orders for standard TEXAS PRODUCTS WSD, INC. products are subject to a 25% cancellation charge.
2. Orders for non-standard or special materials are subject to a 100% cancellation charge.
34 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219
19 1 Texas Products WSD, 3521 Avenue E East, Arlington, TX., 76011, 817-701-2215, Fax 817-701-2219 1