Você está na página 1de 17

ANALISIS KESELAMATAN

TERMOHIDROLIKA TRANSIEN
MENGGUNAKAN EUREKA2RR CODE

(DRAFT)

COACHING PENINGKATAN KEMAMPUAN PETUGAS


KESELAMATAN DAN OPERASI REAKTOR RSG-GAS
TANGSEL, 27 APRIL – 31 JULI 2009

SUKMANTO DIBYO
sukdibyo@batan.go.id

PUSAT PENDIDIKAN DAN PELATIHAN


BATAN 2009

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
Kriteria Safety Untuk Research Reactor

Antisipasi terhadap operasi transients


 Minimum DNBR.
 Maximum fuel meat temperature.
 Fuel plates tidak ter-deformasi oleh thermal stress.
 Pressure in the primary cooling system tidak melebihi design
pressure.

Kondisi Kecelakaan
 Teras harus terendam di air (in any case).
 Teras tidak terjadi rusak parah (damaged severely),
 Pressure in the primary cooling system tidak melebihi design
pressure
 Tidak terjadi radiological risk to the public.

Menghindari nucleate boiling pendingin


(anywhere in the core)

Memberikan margin terhadap burnout fuel plates bahkan hottest


spot di teras (core), menghindari flow instability yang dipengaruhi
oleh partial boiling in the core dan untuk memperoleh neutron flux
yang stabil untuk eksperimen.

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
Computer Codes for Reactor Safety Analysis

 Reactivity initiated accident ( EUREKA2, PARET )


 Loss of coolant accident ( RELAP-5 )
 Transient heat-up calculation of fuel up calculation of fuel
( HEATING-3 )
 Steady-state temperature calculation ( COOLODN )
 Hypothetical accident safety

EUREKA2RR Code
Base on one-dimensional conduction solution in each of up to a
maximum of 20 axial solution sections.

Hydrodynamics solution is one-dimensional node-junction model for


each channel at each junction model at each time nodes.

Heat transfer is considered by natural or forced convection, nucleate,


transition, or stable film convection, nucleate, transition, or stable film
boiling.

Heat transfer and CHF correlations telah dikembangkan untuk research


reactors dengan plate type fuel pada low temperature dan low pressure
conditions.

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
EUREKA-2/RR : A Computer Code

EUREKA-2, adalah paket komputer yang dikembangkan di JAERI (JAEA)


untuk menganalisis reactivity accident terhadap watak transien thermal,
hydrodynamic dan neutronic pada reactor berpendingin air. EUREKA-2
dapat menganalisis transient response pada teras terhadap perubahan
reactivity yang disebabkan oleh control rod withdrawal, perubahan
coolant flow dan/atau perubahan temperature.
Khususnya dapat mensimulasikan watak transien. Paket ini menghitung
secara kopel (coupled) respon neutronic dan thermal-hydrodynamic
untuk multi-regions pada teras reaktor.

EUREKA-2 telah dikembangkan dengan memperbaiki model aliran fluida


dari model nodalisasi dan junction RELAP4/MOD6 code's. EUREKA-2
dapat menganalisis reactivity accidents yang mana temperature
pendingin naik (quickly) dan menghasilkan uap. EUREKA2/RR adalah
versi modifikasi dari EUREKA-2 code dan khusus dikembangkan untuk
research reactors. "Heat Transfer Package (sub-programs untuk
menghitung heat transfer coefficient, ONB temperature, critical heat
flux, etc.)" telah dimasukkan ke dalam EUREKA-2 code ini. Sebagai
informasi, continuous reactivity control system yang dapat
mensimulasikan automatic reactivity control system pada reaktor nuklir,
juga telah dimasukkan ke dalam EUREKA-2 code.

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
Schematic Diagram of Thermal
Hydraulic Test Loop

Electrods Spring

Upper Plenum

Flow Channel

Pressure Tap Thermocouple


Upward
A A'
750 Heater
Insulator Heater
Downward

Lower Plenum 40
A-A' Cross section
30 Thermocouples

Window

GAMBAR TEST-SECTION

ELECTRODS
UPPER
COOLING PLENU
M
WATER
STORAG
E
TANK P
TEST
P
SECTION
ELECTRO-MAGNETIC FLOW
FLOW METER P CHANNEL
750 mm
F
P

BYPASS LINE HEATING


P
ELEMENTS

ROTER FLOW
METERS
PUMP
LOWER
ELECTRODES
PLENUM

GAMBAR 1. TEST LOOP

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
DESKRIPSI MODEL

Input data pada EUREKA-2 terdiri dari title card, comment card, data
card dan terminator card. Untuk itu, kegiatan analisis dapat memakai
komputer PC. Selanjutnya dari data input yang dibuat, EUREKA-2
mampu menganalisis kondisi teras steady-state dan transient condition
oleh RIA, LOFA, coolant channel blockage dsb. Parameter output yang
diinginkan dapat dipilih dari minor edit variables.
Obyek utama dari analisis, difokuskan pada teras reaktor saja. Bagian
bawah teras disebut lower plenum dan bagian atas (air kolam) dinamai
upper plenum.

Berikut ini, data input yang dimasukkan dalam paket,


 Core dimension data
 Time step control dan trip control card
 Coolant channel dimension dan coolant channel condition
 Faktor distribusi daya
 Fuel plate dimension data (heat slab structure)
 Properties of fuel dan cladding material.
 Kinetic / reactivity data

Core fuels terdiri standard fuel elemen dan control fuel elemen, dalam
hal ini beryllium reflector dan dummy elemen tidak diperhatikan sebagai
fuel.

Untuk menyusun data input, maka diperlukan program DISSUE, ICETEA,


predisco dan COOLODN.

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
DISSUE = program untuk menghitung factor distribusi daya dan
feedback reactivity effect (weighting factor for feedback
reactivity). Nilai factor tersebut diambil dari perhitungan
neutronik atau pengukuran.

ICETEA = Program untuk menghitung “Coolant (node) temperature


distribution” yang diinputkan pada EUREKA-2/RR code.

PREDISCO = Program untuk menghitung “Coolant (node) pressure


distribution” yang diinputkan pada EUREKA-2/RR code.

Data GEOMETRI

Data KINETIK

DISSUE3
EUREKA2/RR
ICETEA

PREDISCO

COOLODN2
Output file .lst

GAMBAR.2 SKETSA ILUSTRASI PENGGUNAAN EUREKA2RR

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
The EUREKA-2 program (code) solves the mass and energy balances for
volumes assumed to contain one-dimensional homogeneous fluid with
the vapor and liquid phases in thermodynamic equilibrium.
EUREKA-2 solves the momentum balance at the interfaces or junctions
between control volumes.

GAMBAR 3. CORE AND FUEL

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
Bagaimana Meng-INSTALL EUREKA-2/RR
Code ke PC Anda ?
CARA I=

 Buatlah New Folder dengan nama >byo pada PC anda


 Copy file-file dari CD-ROM folder Cara-1 ke Folder >byo
 Temukan File dengan nama command.com pada drive C: PC anda
(pakai saja fasilitas search atau find). Biasanya Anda dapat
menemukan pada folder C:\windows\system32. Kapasitasnya
sekitar 50 kb. (atau klik start --> klik RUN open cmd Ok. all
program --> accessories --> command promp).
 Copy command.com tersebut ke folder >byo sehingga pada folder
ini anda akan melihat tampilan sebagai berikut ( gunakan view
detail )=

 Catatan .Dat File adalah file input.

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
 Dari Explorer Window di atas  klik command.com tersebut
kemudian akan muncul window berikut (window ini disebut
Command Prompt)

Apabila ingin melihat file yang ada di folder ini ketik dir <enter>.
bkup01m2.dat adalah sample input RSG GAS untuk RSG-GAS SILISIDE
CORE REACTIVITY INSERTION AT START-UP RANGE 0.1MW

Untuk RUN input ini  Pada window ini ketik EUREKA2R bkup01m2
<enter>, berikut yang muncul

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
>>>>

Ketik dir untuk check output files atau lihat dari “Explorer window”
untuk check output files. Anda akan menemukan 3 output files.

bkup01m2.bin : Binary file, which contains all analytical results (all


minor edit variable data), untuk restart dan edit run. file ini dibuat
hanya apabila anda meng-inputkan LDMP dari Card 010001 = -1, -2 or
–3.
bkup01m2.out : EUREKA-2/RR output file.
bkup01m2.lst : EUREKA-2/RR output file yang ditransfer oleh FPR.EXE.
Dengan menggunakan text editor (note pad atau word pad), anda
dapat melihat analytical result.

How to plot EUREKA-2/RR analytical results using


Microsoft EXCEL ?

CARA II=
 Mundurkan kalender PC anda (klik kanan pada layar kanan
bawah) adjust date/time menjadi November 2008 (tanggal
terserah).

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
 Copy file-file dari CD-ROM folder Cara-2 ke Folder >byo/cara2
pada PC anda.
 Siapkan file yang diperlukan pada folder ini yaitu
 EUREKA2.exe
 input.dat misalnya bkup01m2.dat
 STh2OG.TBL
 EUREKAW. Kemudian Klik file EUREKAW ini maka akan
terlihat =

Catatan = Temukan dari load input mencari input.dat ke folder yang akan di run

 Klik load input, lalu START untuk RUN.

melihat file2 hasil run :

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
Buka out file memakai note-pad  ke excel dst.

SETELAH SELESAI KEGIATAN COACHING, JANGAN LUPA


KEMBALIKAN DATE/TIME KOMPUTER ANDA !!!

PUSTAKA-PUSTAKA
 Dibyo S dkk, Verifikasi Perhit. Paket EUREKA-2 Menggunakan Data
Eksperimen Transien Laju Alir RSG-GAS Pertemuan &Presentasi
Ilmiah Penelitian Dasar Iptek Nuklir, PPNY, 1997
 Kaminaga M, Preliminary reactivity insertion accidents analysis of
the multipurpose research reactor RSG-GAS using eureka-2 code,
jaeri-memo 03-176, may 1991
 Kaminaga M, How to install EUREKA-2/RR code and its related
program of DISSUE3, ICETEA1, PREDISCO and COOLOD-N2 to
your PC - Including instruction of How to run the codes-,
International Safety Analysis Seminar NSRA 2008, Japan Atomic
Energy Agency
 Nobuaki Onishi, A Computer Code for Reactor Safety Analysis,
NSRA course lecture 22, jan 2008.

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
LAMPIRAN

Reactor core

Heat Slab
Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------
PUSDIKLAT - BATAN
Cross section of heat slab

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
SUB-CHANNEL OF COOLANT FLOW

Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------


PUSDIKLAT - BATAN
Sukmanto dibyo ------------------------------------------------------------------------------------------------------------------
PUSDIKLAT - BATAN

Você também pode gostar