Escolar Documentos
Profissional Documentos
Cultura Documentos
60HZ / R134a
40~540RT
6CHAC-01A
AIR-COOLED SCREW CHILLER
60HZ / R134a
50~100RT
6CHAC-01A
AIR-COOLED SCREW CHILLER
High Efficiency Model
50~100RT
1. Model Line Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3. Construction Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Features & Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5. Options & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7. ARI capacity ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9. Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
10. Selection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
11. Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
12. Pressure Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
13. Piping Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
14. Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
15. Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
16. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
17. Guide Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Air-Cooled Screw
1. Model Line Up
Nominal Capacity
Model
(Tons)
High Efficiency
50 RCAW0509AAA
70 RCAW0709AAA
80 RCAW0809AAA
90 RCAW0909AAA
100 RCAW1009AAA
CHILLER 60Hz/R134a _ 1
Air-Cooled Screw
2. Nomenclature
Identification Rule
R C A W 100 9 A A A
High Efficiency
Development sequence
Model Type
A : High Efficiency Model
B : Compact Model
Unit Voltage (V / Hz / Ø)
1 : 115 / 60 / 1 2 : 220 / 60 / 1 3 : 208-230 / 60 / 1
5 : 200-220 / 50 / 1 6 : 220-240 / 50 / 1 7 : 100 / 50, 60 / 1
9 : 380 / 60 / 3
A : 220 / 50 / 3 B : 220 / 60 / 3 C : 575 / 60 / 3
D : 440-460 / 60 / 3 E : 265 / 60 / 1 F : 200 / 50, 60 / 1
G : 220-240 / 50, 60 / 1 L : 380-415 / 50, 60 / 3 M : 3,300 / 60 / 3
N : 6,600 / 60 / 3 J : 6,000 / 60 / 3 K :10,000 / 60 / 3
P : 380 / 50 / 3 Q : 400 / 50 / 3 R: 415 / 50 / 3
2 _ CHILLER 60Hz/R134a
Air-Cooled Screw
3. Construction Details
Fan
High Efficiency
Control box
Condenser coil
Power box
Column
Oil separator
Evaporator
Economizer
Compressor
Base frame
CHILLER 60Hz/R134a _ 3
Air-Cooled Screw
4. Features & Benefits
1. Excellent reliability and powerful operation
The cutting-edge design of the series RCAWTM Air-cooled screw chiller accomplishes high performance and reli-
ability for industrial and commercial market.
High Efficiency
LG Air-cooled screw compressors are precisely machined from solid compound metal bar using profound cut-
ting process. Tolerance is maintained within a few microns just like one-tenth hair thickness. Robust compo-
nents with highly skilled assembling process help the compressor last for a long time.
LG condenser production technology is already well-known to worldwide air conditioning manufacturing
industries because of its leading technologies.
The evaporator uses internally grooved tubes having helical angle which enhanced the water side heat transfer
performance. The outside of the tube is of optimum shape which has highly enhanced performance for pooling
boiling and film-wise evaporation with R134-a. The V-shape of condenser allows the largest heat transfer sur-
face area for the same footprint, resulting in largest heat transfer performance when the configuration is opti-
mally designed. The LG V-shape condenser coil was designed using numerical and experimental analysis, hav-
ing optimum air flow path to optimize heat rejection performance. Also, the enhanced condenser fin geometry
allows the optimum heat transfer performance at small air side pressure drop, and this reduces the fan-motor
power consumption. The fin is pre-coated to prevent corrosion at normal conditions and epoxy coated fin con-
denser which is sustainable in harsh conditions, is also available as option.
4 _ CHILLER 60Hz/R134a
Air-Cooled Screw
4. Features & Benefits
Proper oil circulation (triple protection)
Flow switch
- Oil flow switch
- Checking if there is
High Efficiency
water flow
- Checking comp
- Differential winding temperature.
pressure switch
5. Installation, start-up
• Small operating footprint fit most retrofit applications. (Compact model)
• Factory testing for high reliability.
• Factory-installed and tested controls help to reduce start up time and minimized extra cost.
• Display temperatures and pressure for each component spot.
6. Compressor specification
• Semi-hermetic twin-rotor screw compressor.
• Direct-drive, low speed/RPM.
• Only three moving parts, resulting in high reliability.
• The slide valve has a unique profile, optimized for part-load conditions.
• Field serviceable and easy maintenance.
• Precise rotor tip clearance
• A refrigerant dispersing device is set internally to the compressor for motor cooling.
7. Factory Testing
Unit Performance Testing
All LG air-cooled screw chillers are given a complete functional test at the factory. LG computer-based testing
programs completely check the components including sensors, wiring, electronics and microprocessor control
functions.
LG promotes factory performance tests for air-cooled chillers and water-cooled chillers to show that we stand
behind the products which are designed and build up.
The benefits of a performance test include verification of performance, prevention of operational problems, and
assurance of a smooth start-up. Each compressor is run and tested to verify capacity and efficiency. Based on the
CHILLER 60Hz/R134a _ 5
Air-Cooled Screw
4. Features & Benefits
result of this testing, Chiller arrives at the job site fully tested and ready for operation. The LG test facility is
able to simulate real circumstance assuring operation in different climate conditions.
High Efficiency
9. Aerodynamic analysis
Condenser part is appropriately designed by aerodynamic analysis like inlet and outlet uniform airflow design
and dead zone reduction design.
6 _ CHILLER 60Hz/R134a
Air-Cooled Screw
4. Features & Benefits
10. Flooded type evaporator
The flooded type evaporator which have the higher evaporating temperature of refrigerant than direct expansion
can increase the performance. The distributor can make the uniform refrigerant flow.
High Efficiency
11. Eco-friendly refrigerant R134a
System designed with Eco-friendly refrigerant R134a which does not harm the ozone layer & protects the envi-
ronment. The HCFC (R22, R123) series cannot produce any more from 2020 according to the Montreal Protocol
for protection of ozone layer.
CHILLER 60Hz/R134a _ 7
Air-Cooled Screw
5. Options & Accessories
1. Options & Selection
• Communication Interface
Controlled by various control protocols for BMS interface through Modbus port (Standard) or BACnet or
High Efficiency
2. Standard provides
• High Efficiency
High efficiency features include cycle optimization, high efficiency fin and enhanced economizer. These fea-
tures make the unit highly efficient.
• Flow switches
• Wye-Delta starter
• Suction and discharge SVC Valves
8 _ CHILLER 60Hz/R134a
Air-Cooled Screw
6. Controls
Unit controls of the LGE air cooled screw chiller shall include following benefits and features.
1. Sequence of Controls
High Efficiency
When the product starts to run, the condenser fan and the water pump run simultaneously. In the same time,
the magnetic valve 1 is turned on for the minimum low capacity operation.
While the contactor position of condenser fans is checked, water flow is also checked a few seconds later after
water pump run.
In case of having no problem with water flow, startup delay will be activated. Approximately after one minute
delay outlet temperature of chilled water is checked whether the water temperature is reached up enough to
operate the compressor.
When the PLC decides to operate the compressor, compressor starts with wye start and then delta start after a
few seconds. During the starting process of compressor, while the compressor contactor is checking for prob-
lem, the solenoid valve for oil is opened in order to achieve proper oil circulation.
After starting process, normal control starts. The normal control include capacity control, refrigerant mid pres-
sure control for motor cooling, condenser fan control and alarm control.
When the chiller is decided to turn off, compressor load of the compressor is changed to minimum load posi-
tion by changing magnetic valve 1 and turning off magnetic valve 2 and magnetic valve 3. After the delay for
shutdown, the compressor is stopped. When the compressor is stopped, the water pump will still run for a
period in order to protect the compressor from frequent restart and withdraw latent heat from evaporator of
chiller.
CHILLER 60Hz/R134a _ 9
Air-Cooled Screw
6. Controls
Full dot LCD : 4 line text display with backlight
High Efficiency
Through the LCD interface, the operator can monitor the status of chiller operation and control in detail. And
the control configurations also can be performed through the LCD interface. For the monitoring and the config-
uration, 7 menu items are prepared in the LCD display from main menu to parameter setting as shown in the
below picture. In the below picture, amendable menu contents for the configuration are depicted with shaded
color.
10 _ CHILLER 60Hz/R134a
Air-Cooled Screw
7. ARI capacity ratings
7. Versatile Electric and control Options Satisfying Customer’s Requirements are as
given below in a table.
Customer can have various option.
High Efficiency
For example:
Circuit breakers, Capacitor for Power Factor Correction.
These all options are factory installed as per customer requirement.
Please refer table below for more options.
CHILLER 60Hz/R134a _ 11
Air-Cooled Screw
7. ARI capacity ratings
RCAW0709AAA 71.0 249.7 78.0 10.92 3.2 12.8 3.7 170.2 10.7 10.0 29.94
RCAW0809AAA 80.0 281.4 89.5 10.73 3.1 12.5 3.7 191.8 12.1 11.1 33.25
RCAW0909AAA 91.0 320.0 99.0 11.03 3.2 12.9 3.8 218.1 13.8 14.2 42.32
RCAW1009AAA 101.0 355.2 112.0 10.82 3.2 12.7 3.7 242.1 15.3 13.9 41.48
• COP-Coefficient of Performance
• EER-Energy Efficiency Ratio
• IPLV-Integrated Part Load Value
• Cooling Conditions : Ambient temperature is 35°C(95°F), chilled water temperature is 6.7°C(44°F), and chilled water flow is 0.043 l/s per
kW(2.4gpm/ton).
❈ All data in this table is rated in accordance with ARI Standard 550/590.
12 _ CHILLER 60Hz/R134a
Air-Cooled Screw
8. Specifications English Unit
High Efficiency
Number of Independent Refrigerant Circuits 1 1
Refrigerant Charge, R-134a lbs 220 375
Oil Charge gal 4.5 7.9
Weight
Shipping Weight Aluminum Fin Coils lb 6,878 7,452
Copper Fin Coils lb - -
Operating Weight Aluminum Fin Coils lb 7,013 7,632
Copper Fin Coils lb - -
Compressors
Compressor type Semihermetic Twin Screw Semihermetic Twin Screw
Quantity EA 1 1
Condenser
Total Chiller Coil Face Area ft2 153 215
Number of Coils EA 6 8
Number of rows EA 5 5
Fins per inch FPI 12 12
Fans
Number EA 6 8
Fan Motor kW 9.6 12.8
Fan Speed RPM 720 720
Fan Diameter inch 29.5 29.5
Total Chiller Airflow cfm 49,445 65,926
Evaporator
Evaporator type Flooded Flooded
Water Volume gal 16.1 21.7
Maximum Water Side Pressure psig 145 145
Maximum Refrigerant Side Pressure psig 319 319
Minimum Chilled Water Flow Rate gpm 61.1 85.1
Maximum Chilled Water Flow Rate gpm 244.5 340.4
Water Connections
Water Connections Main pipe (Branch) DIN 80 100
Drain (NPT) inch 1 1
Dimensions
Length inch 153.5 198.8
Width inch 78.7 78.7
Height inch 82.7 82.7
NOTES:
1. Cooling conditions: Ambient temperature is 95°F, chilled water temperature outlet is 44°F. Temperature difference is 10°F.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection Main pipes are in compliance with DIN standards.
CHILLER 60Hz/R134a _ 13
Air-Cooled Screw
8. Specifications English Unit
NOTES:
1. Cooling conditions: Ambient temperature is 95°F, chilled water temperature outlet is 44°F. Temperature difference is 10°F.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection Main pipes are in compliance with DIN standards.
14 _ CHILLER 60Hz/R134a
Air-Cooled Screw
8. Specifications SI Unit
High Efficiency
Number of Independent Refrigerant Circuits 1 1
Refrigerant Charge, R-134a kg 100 170
Oil Charge l 17 30
Weight
Shipping Weight Aluminum Fin Coils kg 3,120 3,380
Copper Fin Coils kg - -
Operating Weight Aluminum Fin Coils kg 3,181 3,462
Copper Fin Coils kg - -
Compressors
Compressor type Semihermetic Twin Screw Semihermetic Twin Screw
Quantity EA 1 1
Condenser
Total Chiller Coil Face Area m2 14.2 20.0
Number of Coils EA 6 8
Number of rows EA 5 5
Fins per inch FPI 12 12
Fans
Number EA 6 8
Fan Motor kW 9.6 12.8
Fan Speed RPM 720 720
Fan Diameter mm 750 750
Total Chiller Airflow l/s 23,334 31,112
Evaporator
Evaporator type Flooded Flooded
Water Volume l 61 82
Maximum Water Side Pressure Bar 10 10
Maximum Refrigerant Side Pressure Bar 22 22
Minimum Chilled Water Flow Rate l/s 3.9 5.4
Maximum Chilled Water Flow Rate l/s 15.4 21.5
Water Connections
Water Connections Main pipe (Branch) DIN 80 100
Drain (NPT) mm 32 32
Dimensions
Length mm 3,900 5,050
Width mm 2,000 2,000
Height mm 2,100 2,100
NOTES:
1. Cooling conditions: Ambient temperature is 35°C, chilled water temperature outlet is 6.7°C. Temperature difference is 5.6°C.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection Main pipes are in compliance with DIN standards.
CHILLER 60Hz/R134a _ 15
Air-Cooled Screw
8. Specifications SI Unit
NOTES:
1. Cooling conditions: Ambient temperature is 35°C, chilled water temperature outlet is 6.7°C. Temperature difference is 5.6°C.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection Main pipes are in compliance with DIN standards.
16 _ CHILLER 60Hz/R134a
Air-Cooled Screw
8. Specifications (cont)
High Efficiency
B A C B A
C D D E F
B A B A
Model Total Total
C D C D
C B A C B A
Model Total Total
D E F D E F
CHILLER 60Hz/R134a _ 17
High Efficiency
RCAW0509AAA
NO DESCRIPTION
01 Evaporator
02 Compressor
03 Condenser
04 Power box
Air-Cooled Screw
05 Control box
18 _ CHILLER 60Hz/R134a
06 Fan
07 Fan Motor
08 Receiver
09 Economizer
10 Oil separater
11 Oil filter
12 Filter drier
13 Lower pressure gauge
9. Dimensional Drawings
NOTE
1. Dimensions are in mm(inch).
2. Main Power entry from Bottom side
of Power Box.
RCAW0709AAA, RCAW0809AAA NO DESCRIPTION
01 Evaporator
02 Compressor
03 Condenser
04 Power box
Air-Cooled Screw
05 Control box
06 Fan
07 Fan Motor
08 Receiver
09 Economizer
10 Oil separater
11 Oil filter
12 Filter drier
13 Lower pressure gauge
9. Dimensional Drawings
NOTE
1. Dimensions are in mm(inch).
2. Main Power entry from Bottom side
of Power Box.
CHILLER 60Hz/R134a _ 19
High Efficiency
High Efficiency
NO DESCRIPTION
RCAW0909AAA, RCAW1009AAA 01 Evaporator
02 Compressor
03 Condenser
04 Power box
05 Control box
06 Fan
Air-Cooled Screw
07 Fan Motor
20 _ CHILLER 60Hz/R134a
08 Receiver
09 Economizer
10 Oil separater
11 Oil filter
12 Filter drier
13 Lower pressure gauge
14 High pressure gauge
Chilled water outlet (upper)
9. Dimensional Drawings
15
Chilled water inlet (lower)
16 Lifting holes
NOTE
1. Dimensions are in mm(inch).
2. Main Power entry from Bottom side
of Power Box.
Air-Cooled Screw
10. Selection procedure
LG Chiller selection program helps to select LG air cooled screw chiller quickly and
easily.
To select RCAW series chiller, use the LAT’s Chiller (Computerized ) selection pro-
High Efficiency
gram or follow one of the procedures below.
1) Determine RCAW series unit size and operating conditions required to meet
given capacity at given conditions.
English SI
Given: Given:
Capacity ...................................................100 Tons Capacity...................................................351.7 kW
Leaving Chilled Water Temp (LCWT).................44°F Leaving Chilled Water Temp (LCWT)................6.7°C
Evaporator Water Temp Reduction ...................10°F Evaporator Water Temp Reduction ..................5.6°C
Condenser Entering Air Temp ...........................95°F Condenser Entering Air Temp...........................35°C
Fouling Factor (Evaporator)......0.0001 (ft2·hr·F/ Btu) Fouling Factor (Evaporator) .........0.0186 (m2·°C/kW)
NOTE: For other than 10°F temperature Reduction, NOTE: For other than 5.6°C temperature Reduction,
contact nearest LG office. contact nearest LG office.
2) From Cooling Capacities table and pressure drop curves, determine operating
data for selected unit.
English SI
Unit .......................................................RCAW100 Unit ........................................................RCAW100
Capacity ................................................101.0 Tons Capacity...................................................355.2 kW
Power Input .............................................112.0 kW Power Input ............................................112.0 kW
Evaporator Water Flow ..............................242 gpm Evaporator Water Flow ................................15.3 l/s
Evaporator Pressure Drop.................13.9 ft of water Evaporator Pressure Drop...........................41.5 kPa
CHILLER 60Hz/R134a _ 21
Air-Cooled Screw
11. Performance Data
RCAW0509AAA [IPLV 12.1]
AIR TEMPERATURE ON CONDENSER (°F)
LCWT(°F) 75 80 85 90 95 100
Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER
High Efficiency
40 53.8 49.0 13.16 51.9 50.8 12.26 50.1 52.9 11.36 48.5 55.3 10.53 46.6 58.1 9.63 44.7 61.3 8.74
42 56.1 49.5 13.60 54.2 51.2 12.71 52.4 53.3 11.80 49.9 55.8 10.74 48.8 58.6 9.99 46.7 61.7 9.08
44 58.4 49.8 14.06 56.5 51.6 13.14 54.7 53.6 12.25 52.0 56.2 11.11 51.0 59.0 10.37 48.8 62.3 9.42
45 59.7 50.0 14.34 57.9 51.8 13.42 56.1 53.6 12.56 53.8 56.5 11.41 52.1 59.5 10.51 50.0 62.5 9.60
46 60.7 50.2 14.51 58.8 52.0 13.58 57.0 54.2 12.63 55.1 56.6 11.69 53.1 59.4 10.73 51.0 62.7 9.75
48 63.4 50.4 15.10 61.6 52.3 14.12 59.5 54.5 13.12 57.4 57.0 12.09 55.1 59.9 11.05 53.3 63.1 10.12
50 66.2 50.8 15.64 63.9 52.7 14.54 62.0 54.9 13.57 60.2 57.4 12.58 57.9 60.4 11.51 55.6 63.6 10.48
52 68.9 51.1 16.18 66.6 53.1 15.06 64.8 55.2 14.08 62.5 57.8 12.98 60.2 60.8 11.88 58.0 64.1 10.86
NOTES:
1. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
2. Power inputs include compressors, condenser fans, control power and basic device.
3. Ratings are based on evaporator temperature drop of 10°F(5.6°C).
4. Ambient temperatures 115°F(46.1°C) and greater reflect the high ambient condenser option.
5. Rated in accordance with ARI Standard 550/590.
6. Interpolation between points is permissible. Extrapolation is not permitted.
7. For continual product development, above specification may be changed without notice.
22 _ CHILLER 60Hz/R134a
Air-Cooled Screw
11. Performance Data
RCAW0809AAA [IPLV 12.5]
AIR TEMPERATURE ON CONDENSER (°F)
LCWT(°F) 75 80 85 90 95 100
Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER
High Efficiency
40 84.3 74.4 13.60 81.4 77.1 12.68 78.6 80.3 11.75 76.1 83.9 10.89 73.1 88.2 9.95 70.1 93.0 9.04
42 87.9 75.0 14.06 85.0 77.6 13.14 82.2 80.8 12.20 78.5 84.6 11.13 76.5 88.8 10.33 73.3 93.7 9.39
44 91.5 75.6 14.54 88.6 78.3 13.59 85.8 81.3 12.67 82.3 85.2 11.59 80.0 89.5 10.73 76.6 94.4 9.74
45 93.7 75.8 14.83 90.8 78.5 13.87 87.9 81.3 12.99 84.3 85.8 11.80 81.8 90.3 10.87 78.5 94.8 9.93
46 95.1 76.1 15.00 92.2 78.8 14.05 89.4 82.2 13.05 86.5 85.9 12.09 83.3 90.2 11.09 79.9 95.1 10.09
48 99.5 76.5 15.61 96.6 79.4 14.60 93.4 82.6 13.57 90.1 86.5 12.50 86.5 90.8 11.43 83.5 95.8 10.47
50 103.8 77.0 16.17 100.2 80.0 15.03 97.3 83.2 14.03 94.4 87.1 13.00 90.8 91.6 11.90 87.2 96.5 10.84
52 108.1 77.6 16.73 104.5 80.5 15.57 101.6 83.8 14.55 98.0 87.7 13.42 94.4 92.3 12.28 91.0 97.2 11.23
NOTES:
1. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
2. Power inputs include compressors, condenser fans, control power and basic device.
3. Ratings are based on evaporator temperature drop of 10°F(5.6°C).
4. Ambient temperatures 115°F(46.1°C) and greater reflect the high ambient condenser option.
5. Rated in accordance with ARI Standard 550/590.
6. Interpolation between points is permissible. Extrapolation is not permitted.
7. For continual product development, above specification may be changed without notice.
CHILLER 60Hz/R134a _ 23
Air-Cooled Screw
11. Performance Data
RCAW1009AAA [IPLV 12.7]
AIR TEMPERATURE ON CONDENSER (°F)
LCWT(°F) 75 80 85 90 95 100
Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER
High Efficiency
40 107.8 93.2 13.88 104.1 96.6 12.94 100.4 100.6 11.99 97.3 105.1 11.11 93.5 110.5 10.16 89.6 116.5 9.23
42 112.4 94.0 14.35 108.7 97.3 13.41 105.0 101.2 12.45 100.8 106.0 11.41 97.8 111.3 10.54 93.7 117.3 9.58
44 117.0 94.7 14.83 113.3 98.1 13.87 109.7 101.8 12.93 104.2 106.8 11.72 101.0 112.0 10.82 98.0 118.3 9.94
45 119.8 95.0 15.13 116.1 98.4 14.16 112.4 101.8 13.25 107.8 107.5 12.04 103.9 112.7 11.06 100.3 118.8 10.13
46 121.6 95.4 15.31 117.9 98.7 14.33 114.3 102.9 13.32 110.6 107.6 12.34 106.5 113.0 11.32 102.2 119.1 10.29
48 127.2 95.8 15.93 123.5 99.4 14.90 119.4 103.5 13.85 115.2 108.4 12.76 110.6 113.8 11.66 106.8 120.0 10.68
50 132.7 96.5 16.50 128.1 100.2 15.34 124.4 104.3 14.31 120.7 109.1 13.27 116.1 114.7 12.14 111.5 120.9 11.06
52 138.2 97.2 17.07 133.6 100.9 15.89 129.9 105.0 14.85 125.3 109.8 13.69 120.7 115.6 12.53 116.3 121.8 11.46
NOTES:
1. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
2. Power inputs include compressors, condenser fans, control power and basic device.
3. Ratings are based on evaporator temperature drop of 10°F(5.6°C).
4. Ambient temperatures 115°F(46.1°C) and greater reflect the high ambient condenser option.
5. Rated in accordance with ARI Standard 550/590.
6. Interpolation between points is permissible. Extrapolation is not permitted.
7. For continual product development, above specification may be changed without notice.
24 _ CHILLER 60Hz/R134a
Air-Cooled Screw
12. Pressure Drop
High Efficiency
200
180 90 RT 100 RT
160
140 80 RT
Pressure drop (kPa)
70 RT
120
100 50 RT
80
60
40
20
0
0 5 10 15 20 25 30 35
70
60 90 RT 100 RT
Pressure drop (ft wg)
50
80 RT
40 70 RT
50 RT
30
20
10
0
0 100 200 300 400 500 600
CHILLER 60Hz/R134a _ 25
High Efficiency
No DESCRIPTION
1 Compressor
2 Condensing coil
3 Receiver
4 Oil Filter
5 Oil separater
6 Ejector for Oil Return
7,8 Expansion Devices
9 Filter Drier
Air-Cooled Screw
10 Evaporator
26 _ CHILLER 60Hz/R134a
11 Economizer (Flash gas tank)
1
2 LEGEND
13. Piping Diagrams
SYMBOL DESCRIPTION
OH Oil heater
TS Temperature sensor
HPS High pressure switch
S
LPS LPS Low pressure switch
TS WFS
OLS Oil level sensor
3 5 11 Sight glass
6 9 OS
Oil sol. valve
S Refrigerant sol. valve
7 8
OLS OH Check valve
OS
Service valve
4
Refrigerant pipe Line
Oil Pipe Line
OFS
RCAW0509AAA
R
LEGEND
S
T SYMBOL DESCRIPTION
N
F1~F3 Fuses
Air-Cooled Screw
F3
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 FG
380VAC 3P 4W
CF1 C/Box Heat dissipation fan
R S T
FN1A FN2A FN3A M2 M1 L
VOLTAGE CF2 P/Box Heat dissipation fan
2T1 4T2 6T3 220VAC MONITORING TO MAN CONTROL
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 L1 M3 2T1 4T2 6T3 M UNIT
(5E)
R N R1 Assist relay
L2 40
OLF1A OLF2A OLF3A T2
OLC1 CCH1
4.5A 4.5A 4.5A 107A CB
L3 T3 Oil heater
(3.5-5) (3.5-5) (3.5-5) (100~135)
202 1 2
THC
M1 F2 CCH1
8 9 SV2 Mid pressure air charging sol. v/v
3
U V START/STOP SWITCH M1 M2 M3 Comp. capacity control v/v
X W
Y 4
FAN 1A FAN 2A FAN 3A COMP
Z CF1 M1 Comp. magnetic switch 1
THC
40 11
CF2 M2
TO MAIN CONTROL UNIT
Comp. magnetic switch 2 ( )
47 12 1
M1
+V -V
HP
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 26 27
M2
OLF1B OLF2B OLF3B
4.5A 4.5A 4.5A
ANTI-FREEZING
24VDC-P
24VDC-G
INT69
HIGH-LOW DIFFERENTIAL
REMOTE RUN
OIL FLOW
OLC1
SW1 Mold option switch
40 41
OLF1A101
OLF2A104
OLF2B110
26 27 10 11 12 13 1415 16 17 18 19 27 43 31 32 33 34 35 36 37 3839 42 43 44 45 46 27 47
HP High pressure switch
+24V -24V RTD1 RTD1 RTD2 RTD2 RTD3 RTD3 RTD4 RTD4 RTD5 RTD5 24V-G 24V IO1 IO2 IO3 IO4 IO5 IO6 IO7 IO8 IO9 I10 I11 I12 I13 I14 I15 I16 24V-G 24V
-(2) +(1) -(4) +(3) -(6) +(5) -(8) +(7) -(10) +(9)
Intput (Primary)
Intput (Secondary)
HMI MAIN CONTROL UNIT LP Low pressure switch
UNIT Output (Primary) Output (Secondary)
COM O01 O02 O03 O04 O05 O06 O07 O08 COM O09 O10 O11 O12 O13 O14 O15 O16 O17 O18 O19 O20
4 7
EMRG
97 98
FAULT
CHILLED WATER PUMP
A1 A1 A1 A1 A1 A1 A1 A1 A1
SV1 M1 M2 M3 MV1 MV2 MV3 FN1A FN1B FN2A FN2B FN3A FN3B SV2
A2 A2 A2 A2 A2 A2 A2 A2 A2
Note:
1. Field modifications or additions must be in compliance with national electrical code as well as all applicable codes and specifications.
2. Refer to certified dimension drawing for exact locations of the main power and control power entrance locations.
CHILLER 60Hz/R134a _ 27
High Efficiency
High Efficiency
RCAW0709AAA, RCAW0809AAA
R LEGEND
S
SYMBOL DESCRIPTION
T
N F1~F3 Fuses
F3 CF1 C/Box Heat dissipation fan
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 FG
Air-Cooled Screw
380VAC 3P 4W
R S T
CF2 P/Box Heat dissipation fan
FN1A FN2A FN3A FN4A M2 M1 L
28 _ CHILLER 60Hz/R134a
VOLTAGE
2T1 4T2 6T3 220VAC MONITORING TO MAN CONTROL R1 Assist relay
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 L1 M3 2T1 4T2 6T3 M UNIT
(5E)
R N CCH1
L2 40
OLF1A OLF2A OLF3A OLF4A T2 Oil heater
OLC1
4.5A 4.5A 4.5A 4.5A 107A CB THC
L3 T3
(3.5-5) (3.5-5) (3.5-5) (3.5-5) (100~135) Inner temperature controller
202 1 2
3 3 2
L0 SV2 Mid pressure air charging sol. v/v
M1 F2 CCH1
8 9 M1 M2 M3 Comp. capacity control v/v
3
U V START/STOP SWITCH M1 Comp. magnetic switch 1
X W
Y 4
FAN 1A FAN 2A FAN 3A FAN 4A COMP
Z CF1 M2 Comp. magnetic switch 2 ( )
THC
40 11
CF2 M3 Comp. magnetic switch 3 ( Y )
TO MAIN CONTROL UNIT
47 12 1
R1
FN1A ~ FN4A Fan1A~Fan4 A magnet contactors
2 INTERNAL 2
2 4
PROTECTOR
4 (INT69) FN1B ~ FN4B
4 Fan1B~Fan4B magnet contactors
220VAC
OLF1A ~ OLF4A Fan1A~Fan4 A over current relays
L M
OLF1B ~ OLF4B Fan1B~Fan4B over current relays
L4
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 4 OLC1 Comp over current relay
SMPS N2
2 Emergency switch
FN1B
FN3A
FN3B
+V -V
HP
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 26 27 L0 Power indicator lamp
M2
24VDC-P
24VDC-G
INT69
LP
HIGH-LOW DIFFERENTIAL
26 27 10 11 12 13 1415 16 17 18 19 27 43 31 32 33 34 35 36 37 3839 40 41 42 43 44 45 46 27 47
5E Reverse phase protector
+24V -24V RTD1 RTD1 RTD2 RTD2 RTD3 RTD3 RTD4 RTD4 RTD5 RTD5 24V-G 24V IO1 IO2 IO3 IO4 IO5 IO6 IO7 IO8 IO9 I10 I11 I12 I13 I14 I15 I16 24V-G 24V
-(2) +(1) -(4) +(3) -(6) +(5) -(8) +(7) -(10) +(9)
Intput (Primary)
Intput (Secondary)
HMI MAIN CONTROL UNIT
UNIT Output (Primary) Output (Secondary)
COM O01 O02 O03 O04 O05 O06 O07 O08 COM O09 O10 O11 O12 O13 O14 O15 O16 O17 O18 O19 O20
4 7
EMRG
97 98
FAULT
CHILLED WATER PUMP
A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1
SV1 M1 M2 M3 MV1 MV2 MV3 FN1A FN1B FN2A FN2B FN3A FN3B FN4A FN4B SV2
A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2
Note:
1. Field modifications or additions must be in compliance with national electrical code as well as all applicable codes and specifications.
2. Refer to certified dimension drawing for exact locations of the main power and control power entrance locations.
RCAW0909AAA, RCAW1009AAA
R LEGEND
Air-Cooled Screw
S
T SYMBOL DESCRIPTION
N F1~F3 Fuses
F3
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 FG CF1
380VAC 3P 4W
R S T
C/Box Heat dissipation fan
FN1A FN2A FN3A FN4A FN5A M2 M1 L
VOLTAGE CF2 P/Box Heat dissipation fan
2T1 4T2 6T3 220VAC MONITORING TO MAN CONTROL
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 L1 M3 2T1 4T2 6T3 M UNIT
(5E)
R N R1 Assist relay
L2 40
T2
14. Wiring Diagrams
M1 F2 CCH1
8 9 SV2 Mid pressure air charging sol. v/v
3
U V START/STOP SWITCH M1 M2 M3 Comp. capacity control v/v
X W
Y 4
FAN 1A FAN 2A FAN 3A FAN 4A FAN 5A COMP
Z CF1
M1 Comp. magnetic switch 1
THC
40 11
CF2
TO MAIN CONTROL UNIT
M2 Comp. magnetic switch 2 ( )
47 12 1
INTERNAL 2 R1
2 2 4 M3 Comp. magnetic switch 3 ( Y )
PROTECTOR
4 (INT69)
4
220VAC FN1A ~ FN4A Fan1A~Fan4 A magnet contactors
L M
FN1B ~ FN4B Fan1B~Fan4B magnet contactors
L4
OLF1A ~ OLF4A Fan1A~Fan4 A over current relays
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 4
+V -V
HP
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 26 27 OLC1 Comp over current relay
M2
24VDC-P
24VDC-G
INT69
LP
HIGH-LOW DIFFERENTIAL
SW1
26 27 10 11 12 13 1415 16 17 18 19 27 43 31 32 33 34 35 36 37 3839 40 41 42 43 44 45 46 27 47
+24V -24V RTD1 RTD1 RTD2 RTD2 RTD3 RTD3 RTD4 RTD4 RTD5 RTD5 24V-G 24V IO1 IO2 IO3 IO4 IO5 IO6 IO7 IO8 IO9 I10 I11 I12 I13 I14 I15 I16 24V-G 24V HP High pressure switch
-(2) +(1) -(4) +(3) -(6) +(5) -(8) +(7) -(10) +(9)
Intput (Primary)
Intput (Secondary)
HMI MAIN CONTROL UNIT
UNIT Output (Primary) Output (Secondary)
LP Low pressure switch
COM O01 O02 O03 O04 O05 O06 O07 O08 COM O09 O10 O11 O12 O13 O14 O15 O16 O17 O18 O19 O20
4 7
EMRG
97 98
FAULT
CHILLED WATER PUMP
A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1
SV1 M1 M2 M3 MV1 MV2 MV3 FN1A FN1B FN2A FN2B FN3A FN3B FN4A FN4B FN5A FN5B SV2
A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2
Note:
1. Field modifications or additions must be in compliance with national electrical code as well as all applicable codes and specifications.
2. Refer to certified dimension drawing for exact locations of the main power and control power entrance locations.
CHILLER 60Hz/R134a _ 29
High Efficiency
Air-Cooled Screw
15. Electrical Data
Single point power connection
Unit Voltage Compressor Fan REC
Total
Model Supplied No. LRA RLA No. RLA MCA MOCP Fuse
High Efficiency
V-Hz-Phase RLA
Min. Max EA Amp. Amp. EA Amp. Size
RCAW0509AAA 380-60-3 342 418 1 270 88 6 3.6 110 192 300 250
RCAW0709AAA 380-60-3 342 418 1 343 112 8 3.6 141 246 400 300
RCAW0809AAA 380-60-3 342 418 1 407 126 8 3.6 155 271 450 350
RCAW0909AAA 380-60-3 342 418 1 372 140 10 3.4 174 305 500 400
RCAW1009AAA 380-60-3 342 418 1 482 162 10 3.6 198 348 500 450
Symbols:
LRA: Locked Rotor Amps.
RLA: Rated Load Amps.
MCA : Minimum Circuit Amps. (for wire sizing)
MOCP : Maximum Overcurrent Protection
REC Fuse Size: Recommended Fuse Size
Notes:
1. 380V-3Ø-60Hz rating voltage, voltage maximum tolerance ±10%.
2. Electrical source must be 3phase 4wire for security. Neutral line and earth line must be separately connected.
3. Ground wire must be installed.
4. Use cable applicable to current more than MCA.
5. Use ring type terminal cable.
6. Have all electric work done by a licensed electrician according to "Electrical facility engineering standard"
and "Interior wire regulations."
30 _ CHILLER 60Hz/R134a
Air-Cooled Screw
16. Installation
Installation
Consider the condition of ventilation
• Flooded air cooled chiller should be installed in the ground open air or provided proper ventilation.
High Efficiency
• If install the unit alongside the wall, there must be enough ventilation space.
AIR AIR
Wall
LG
>3,000(118.1)
>800(31.5)
[Unit : mm (inch)]
Note :
When the front or backside of the unit is near to the wall, if the wall is higher than the ground more than
800mm(31.5 inches), the distance between wall and unit should be longer than 3000mm(118.1 inches).
AIR AIR
LG
Wall
>2,000(78.7)
>800(31.5)
[Unit : mm (inch)]
Note :
When the front or backside of the unit is near to the wall, if the wall is higher than the ground less than
800mm(31.5 inches), the distance between wall and unit should be longer than 2000mm(78.7 inches).
AIR AIR
Wall
3 9
0
12
High
-76 MPa 15
>1,600(36) 10
-76
15
LOW
MPa 35
25
30
>800(31.5)
[Unit : mm (inch)]
Note :
When the side is near to the wall, the distance between wall and unit should be longer than
1600mm(63.0 inches).
CHILLER 60Hz/R134a _ 31
Air-Cooled Screw
16. Installation
AIR AIR AIR AIR
LG LG
High Efficiency
>3,000(118.1)
[Unit : mm (inch)]
Note :
The distance between units should be longer than 3000mm(118.1).
BEHIND
>1600(63)
SE RVICE SE RVICE
SIDE CLEARANCE CLEARANCE SIDE
ARE A ARE A
>800(31.5) >1,000(39.4)
>1800(70.9)
[Unit : mm (inch)]
FRON T
32 _ CHILLER 60Hz/R134a
RCAW0509AAA
Air-Cooled Screw
16. Installation
Note :
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done by cus-
tomer.
3. Drain should be located at low level around the foundation for proper draining.
CHILLER 60Hz/R134a _ 33
High Efficiency
High Efficiency
RCAW0709AAA, RCAW0809AAA
Air-Cooled Screw
34 _ CHILLER 60Hz/R134a
16. Installation
Note :
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done
by customer.
3. Drain should be located at low level around the foundation for proper drain-
ing.
RCAW0909AAA, RCAW1009AAA
Air-Cooled Screw
16. Installation
Note :
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily
done by customer.
3. Drain should be located at low level around the foundation for proper
draining.
CHILLER 60Hz/R134a _ 35
High Efficiency
Air-Cooled Screw
17. Guide Specifications
1. General
• LG RCAW series are microprocessor controlled, twin-screw compressor, air-cooled, liquid chillers.
• Each RCAW series chiller is factory-assembled including compressor, motor, evaporator, condenser,
High Efficiency
2. Equipment
2.01 Application Range
• This specification is applied to all the models of air cooled screw chillers RCAW which is made and
sold by LG Electronics Co.
2.04 Evaporator
• Evaporator is (Flooded) Shell & Tube type and made with carbon steel. Also it has Tube changeable structure.
• To increase the efficiency of evaporator, it has the structure to spray refrigerant liquid on heat exchanger tube
surface.
• It has the structure which is easy to be disassembled, because water box cover is attached and fixed with bolt
& nut for maintenance and washing of inner tube.
• Safety valve which spouts refrigerant of evaporator is installed to protect chiller in case when temperature
increases too much because of fire.
• Tube is phosphorus deoxidization bronze pipe which has over 99.9% purity and no joint, outside of it is
attached to special shape Fin, inside of it has inner grooved tube or equivalent product.
• Anti-freezing switch is installed at chilled water outlet to prevent it from being frozen and burst by chilled
36 _ CHILLER 60Hz/R134a
Air-Cooled Screw
17. Guide Specifications
water flow stopping, chilled water temperature decreasing, and drain plug, air bent plug are at body.
• Evaporator is covered with thermal insulation materials for dew condensation prevention and thermal insula-
tion.
High Efficiency
• Design pressure for shell is 300psig(2.1MPa).
• Design working pressure for tube line is 150psig(1.0MPa) or 300psig(optional).
• The evaporator and economizer are insulated with 3/4inch(19mm) insulation(K=0.26).
2.05 Condenser
• Tubes in condenser are made with phosphorus deoxidization bronze pipe which has no joint part
and purity over 99.9%, and made in structure with Al fin to increase heat transfer area. (Cross fin &
tube type)
• Inner pressure test of refrigerant working side is done at 1.5 times of 2.5MPa which is designed
pressure; it should not have any leakage or change.
• Condenser coil which has been passed the inner pressure test are vacuumed to remove all moisture.
• Propeller type is used for fan, it has proper air volume. Also it has proper strength for circulating air
and is operated stably through balance test.
• Fan motor is applied by insulation class F.
• Condenser fans are direct-driven.
CHILLER 60Hz/R134a _ 37
Air-Cooled Screw
17. Guide Specifications
• Temperature check – Sensing overheat of compressor discharge temperature, sensing overheat of
compressor motor wire, and anti-freezing switch.
• Chilled water flow – Chilled water flow switch.
High Efficiency
• Voltage and current – Voltage monitoring system, compressor over-current breaker (Compressor
OCR) and fan motor over-current breaker (fan motor OCR).
38 _ CHILLER 60Hz/R134a
Air-Cooled Screw
17. Guide Specifications
• PLC provides MODBUS RTU communication function; especially Lon Works or BACnet can be
applied to the system on the request of customer by installing exterior type translator.
• Power panel contains electric contactor for compressor and over load relay. Electric contactor for
High Efficiency
compressor is made to minimize the running current of compressor through Y-Δ start.
• Power panel contains electric contactor and over-load relay for each condenser fan.
• Power panel contains power monitoring device to detect power supply condition, and power
monitoring device has over 5 detecting function including reverse voltage, over voltage, low volt-
age, open-phase, and no voltage.
• Auto control system of chiller contains the following functions:
- It performs fan and compressor ON/OFF function and several solenoid valve controlling.
- It provides interlock point of contact for controlling chilled water pump.
- It controls refrigerant volume through the condition of compressor operation and slide valve of
compressor for achieving chilled water outlet setting temperature.
- When chilled water outlet temperature and condenser outlet refrigerant temperature is high, limit
the compressor operation to prevent malfunction.
- Keep proper pressure of condenser through fan control by condenser outlet temperature.
3. Other
• Chiller is made after getting approval on everything about production from ordering company.
About thing that is not in this specification, discuss it with ordering company and get approval.
CHILLER 60Hz/R134a _ 39
Air-Cooled Screw
Appendix
Unit Conversion
Cooling Capacity
High Efficiency
RT Btu/h kcal/h W
1 12,000 3024.2 3516.8
Volume
Length
m cm mm inch
1 100 1,000 39.37
Power
HP W kW
1 746 0.746
Pressure
Temperature
5
C = — (F - 32)
9
Where,
C is Temperature in °C
F is Temperature in °F
40 _ CHILLER 60Hz/R134a
High Efficiency
CHILLER 60Hz/R134a _ 41
High Efficiency
42 _ CHILLER 60Hz/R134a
High Efficiency
CHILLER 60Hz/R134a _ 43
AIR-COOLED SCREW CHILLER
60HZ / R134a
40~540RT
6CHAC-01A
AIR-COOLED SCREW CHILLER
Compact Model
40~540RT
1. Model Line Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3. Construction Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Features & Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5. Options & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6. Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7. ARI capacity ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
10. Selection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
11. Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
12. Pressure Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
13. Piping Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
14. Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
15. Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
16. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
17. Guide Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Air-Cooled Screw
1. Model Line Up
Nominal Capacity
Model
(Tons)
40 RCAW0409BAA
50 RCAW0509BAA
60 RCAW0609BAA
70 RCAW0709BAA
80 RCAW0809BAA
90 RCAW0909BAA
100 RCAW1009BAA
110 RCAW1109BAA
120 RCAW1209BAA
130 RCAW1309BAA
150 RCAW1509BAA
Compact
170 RCAW1709BAA
180 RCAW1809BAA
200 RCAW2009BAA
220 RCAW2209BAA
240 RCAW2409BAA
260 RCAW2609BAA
300 RCAW3009BAA
340 RCAW3409BAA
360 RCAW3609BAA
390 RCAW3909BAA
450 RCAW4509BAA
510 RCAW5109BAA
540 RCAW5409BAA
CHILLER 60Hz/R134a _ 1
Air-Cooled Screw
2. Nomenclature
Identification Rule
R C A W 100 9 B A A
Development sequence
Model Type
A : High Efficiency Model
B : Compact Model
Compact
Unit Voltage (V / Hz / Ø)
1 : 115 / 60 / 1 2 : 220 / 60 / 1 3 : 208-230 / 60 / 1
5 : 200-220 / 50 / 1 6 : 220-240 / 50 / 1 7 : 100 / 50, 60 / 1
9 : 380 / 60 / 3
A : 220 / 50 / 3 B : 220 / 60 / 3 C : 575 / 60 / 3
D : 440-460 / 60 / 3 E : 265 / 60 / 1 F : 200 / 50, 60 / 1
G : 220-240 / 50, 60 / 1 L : 380-415 / 50, 60 / 3 M : 3,300 / 60 / 3
N : 6,600 / 60 / 3 J : 6,000 / 60 / 3 K :10,000 / 60 / 3
P : 380 / 50 / 3 Q : 400 / 50 / 3 R: 415 / 50 / 3
2 _ CHILLER 60Hz/R134a
Air-Cooled Screw
3. Construction Details
Fan
Control box
Condenser coil
Power box
Compact
Column
Oil separator
Evaporator
Economizer
Compressor
Base frame
CHILLER 60Hz/R134a _ 3
Air-Cooled Screw
4. Features & Benefits
1. Excellent reliability and powerful operation
The cutting-edge design of the series RCAWTM Air-cooled screw chiller accomplishes high performance and
reliability for industrial and commercial market.
LG Air-cooled screw compressors are precisely machined from solid compound metal bar using profound cut-
ting process. Tolerance is maintained within a few microns just like one-tenth hair thickness. Robust compo-
nents with highly skilled assembling process help the compressor last for a long time.
LG condenser production technology is already well-known to worldwide air conditioning manufacturing
industries because of its leading technologies.
'RCAW' was designed to be a prime chiller and was born to lead air-cooled chiller market. It is LG technology.
- Checking comp
- Differential winding temperature.
pressure switch
4 _ CHILLER 60Hz/R134a
Air-Cooled Screw
4. Features & Benefits
5. Installation, start-up
• Small operating footprint fit most retrofit applications. (Compact model)
• Factory testing for high reliability.
• Factory-installed and tested controls help to reduce start up time and minimized extra cost.
• Display temperatures and pressure for each component spot.
6. Compressor specification
• Semi-hermetic twin-rotor screw compressor.
• Direct-drive, low speed/RPM.
• Only three moving parts, resulting in high reliability.
• The slide valve has a unique profile, optimized for part-load conditions.
• Field serviceable and easy maintenance.
• Precise rotor tip clearance
• A refrigerant dispersing device is set internally to the compressor for motor cooling.
Compact
7. Factory Testing
Unit Performance Testing
All LG air-cooled screw chillers are given a complete functional test at the factory. LG computer-based testing
programs completely check the components including sensors, wiring, electronics and microprocessor control
functions.
LG promotes factory performance tests for air-cooled chillers and water-cooled chillers to show that we stand
behind the products which are designed and build up.
The benefits of a performance test include verification of performance, prevention of operational problems,
and assurance of a smooth start-up. Each compressor is run and tested to verify capacity and efficiency. The
result of this testing, Chiller arrives at the job site fully tested and ready for operation. The LG test facility is
able to simulate real circumstance assuring operation in differing climates.
CHILLER 60Hz/R134a _ 5
Air-Cooled Screw
4. Features & Benefits
8. Structural strength analysis
Structure is designed to ensure stiffness for various disturbances by steps of structure modeling, meshing, exci-
tation and evaluation.
9. Aerodynamic analysis
Compact
Condenser part is appropriately designed by aerodynamic analysis like inlet and outlet uniform airflow design
and dead zone reduction design.
6 _ CHILLER 60Hz/R134a
Air-Cooled Screw
5. Options & Accessories
1. Options & Selection
• Communication Interface
Controlled by various control protocols for BMS interface through Modbus port (Standard) or BACnet or
LonWorks Port (Factory installed optional)
• Coil Protection & Access Protection
Coated wire mesh covers to protect condenser coil, evaporator and compressor.
• Soft starter(Factory Installed option)
Soft starter is provided for the soft start of compressor by linear voltage increase.
• Isolators(Field Installed option)
Neoprene isolator and Spring isolator are provided as field installed option by LG for vibration damping of
chiller.
• Condenser Corrosion Protection
For protecting the condenser in corrosive environment, epoxy coated option is provided.
Site conditions should be matched with the proper condenser fin coatings
to inhibit coil corrosion and extend equipment life.
Compact
• High Ambient Operation
The high ambient option permits operation at high ambient (up to 125°F/52°C).
• Sound Proof
Compressor sound attenuating blanket (Factory installed) is provided for making it sound proof.
• Power Disconnect Switch
Disconnect switch to isolate the chiller from main power can be provided.
• Power Connection
Power connections are provided as shown in the below table as Standard and Option.
Standard Option
Type Hz Type RT Comp
Point Terminal Point Terminal
40~180 1 single 1 - -
Air
60Hz Compact 200~360 2 single 1 dual 2
cooled
390~540 3 dual 2 - -
• Ice Making
The unit controls are factory set operating in ice making mode for thermal storage applications.
3. Standard provides
• Compact model
More focus on compact design and light weight is done by organizing the components effectively.
• Flow switches
• Wye-Delta starter
• Suction and discharge SVC Valves
CHILLER 60Hz/R134a _ 7
Air-Cooled Screw
6. Controls
Unit controls of the LGE air cooled screw chiller shall include following benefits and features.
1. Sequence of Controls
When the product starts to run, the condenser fan and the water pump run simultaneously. In the same time,
the magnetic valve 1 is turned on for the minimum low capacity operation.
While the contactor position of condenser fans is checked, water flow is also checked a few seconds later after
water pump run.
In case of having no problem with water flow, startup delay will be activated. Approximately after one minute
delay outlet temperature of chilled water is checked whether the water temperature is reached up enough to
operate the compressor.
When the PLC decides to operate the compressor, compressor starts with wye start and then delta start after a
few seconds. During the starting process of compressor, while the compressor contactor is checking for prob-
lem, the solenoid valve for oil is opened in order to achieve proper oil circulation.
After starting process, normal control starts. The normal control include capacity control, refrigerant mid pres-
sure control for motor cooling, condenser fan control and alarm control.
When the chiller is decided to turn off, compressor load of the compressor is changed to minimum load posi-
Compact
tion by changing magnetic valve 1 and turning off magnetic valve 2 and magnetic valve 3. After the delay for
shutdown, the compressor is stopped. When the compressor is stopped, the water pump will still run for a
period in order to protect the compressor from frequent restart and withdraw latent heat from evaporator of
chiller.
8 _ CHILLER 60Hz/R134a
Air-Cooled Screw
6. Controls
Compact
LED
START STOP
CHILLER 60Hz/R134a _ 9
Air-Cooled Screw
6. Controls
connection
Capacitor for Power Factor Correction
Dual point power No capacitor for Power Factor Correction
connection
Electric Capacitor for Power Factor Correction
Circuit Breakers
and Control No capacitor for Power Factor Correction
Single point power
connection
Capacitor for Power Factor Correction
10 _ CHILLER 60Hz/R134a
Air-Cooled Screw
7. ARI capacity ratings
Compact
RCAW1509BAA 146.4 515.0 177.8 9.88 2.9 11.6 3.4 351.0 22.1 14.6 43.77
RCAW1709BAA 165.9 583.4 197.7 10.07 2.9 11.8 3.4 397.6 25.1 15.0 44.83
RCAW1809BAA 175.8 618.2 206.3 10.22 3.0 12.0 3.5 421.4 26.6 15.5 45.73
RCAW2009BAA 193.9 682.0 228.0 10.21 3.0 11.9 3.5 464.8 29.3 12.2 36.51
RCAW2209BAA 214.4 754.0 257.0 10.01 2.9 11.7 3.4 513.9 32.4 13.3 39.75
RCAW2409BAA 229.7 808.0 278.3 9.91 2.9 11.6 3.4 550.7 34.7 13.3 39.68
RCAW2609BAA 249.6 878.0 297.6 10.07 3.0 11.8 3.4 598.4 37.8 13.5 40.21
RCAW3009BAA 292.9 1,030.0 355.6 9.88 2.9 11.6 3.4 702.0 44.3 14.6 43.77
RCAW3409BAA 331.8 1,166.8 395.5 10.07 3.0 11.8 3.4 795.3 50.2 15.0 44.83
RCAW3609BAA 351.6 1,236.5 412.7 10.22 3.0 12.0 3.5 842.8 53.2 15.5 45.73
RCAW3909BAA 374.5 1,317.0 446.4 10.07 3.0 11.8 3.4 897.6 56.6 13.5 40.21
RCAW4509BAA 439.3 1,545.0 533.3 9.88 2.9 11.6 3.4 1053.0 66.4 14.6 43.77
RCAW5109BAA 497.6 1,750.2 593.2 10.07 3.0 11.8 3.4 1192.9 75.3 15.0 44.83
RCAW5409BAA 527.4 1,854.7 619.0 10.22 3.0 12.0 3.5 1264.1 79.8 15.3 45.73
• COP-Coefficient of Performance
• EER-Energy Efficiency Ratio
• IPLV-Integrated Part Load Value
• Cooling Conditions : Ambient temperature is 35°C(95°F), chilled water temperature is 6.7°C(44°F), and chilled water flow is
0.043 l/s per kW(2.4gpm/ton).
❈All data in this table is rated in accordance with ARI Standard 550/590.
CHILLER 60Hz/R134a _ 11
Air-Cooled Screw
8. Specifications English Unit
Air Cooled Screw Chiller Model RCAW0409BAA RCAW0509BAA RCAW0609BAA RCAW0709BAA RCAW0809BAA
General Unit Data
Unit Capacity at ARI Conditions Tons 38.1 47.5 58.0 67.1 77.1
Number of Independent Refrigerant Circuits 1 1 1 1 1
Refrigerant Charge, R-134a lbs 184 224 286 326 367
Oil Charge gal 4.4 5.8 6.7 8.1 9.6
Weight
Shipping Weight Aluminum Fin Coils lb 7,286 7,348 8,989 9,082 9,141
Copper Fin Coils lb 7,755 7,817 9,701 9,794 9,853
Operating Weight Aluminum Fin Coils lb 7,462 7,524 9,187 9,315 9,375
Copper Fin Coils lb 7,932 7,994 9,900 10,027 10,087
Compressors
Compressor type Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw
Quantity EA 1 1 1 1 1
Condenser
Total Chiller Coil Face Area ft2 87 87 131 131 131
Number of Coils EA 4 4 6 6 6
Number of rows EA 6 6 6 6 6
Compact
NOTES:
1. Cooling conditions: Ambient temperature is 95°F, chilled water temperature outlet is 44°F. Temperature difference is 10°F.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection pipes are in compliance with DIN standards.
12 _ CHILLER 60Hz/R134a
Air-Cooled Screw
8. Specifications English Unit
Air Cooled Screw Chiller Model RCAW0909BAA RCAW1009BAA RCAW1109BAA RCAW1209BAA RCAW1309BAA
General Unit Data
Unit Capacity at ARI Conditions Tons 88.4 97.0 107.2 114.9 124.8
Number of Independent Refrigerant Circuits 1 1 1 1 1
Refrigerant Charge, R-134a lbs 428 469 520 551 617
Oil Charge gal 10.5 11.0 12.2 12.8 10.6
Weight
Shipping Weight Aluminum Fin Coils lb 9,763 9,866 10,041 10,206 12,416
Copper Fin Coils lb 10,550 10,653 10,828 10,993 13,446
Operating Weight Aluminum Fin Coils lb 10,030 10,133 10,341 10,506 12,758
Copper Fin Coils lb 10,817 10,920 11,128 11,293 13,788
Compressors
Compressor type Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw
Quantity EA 1 1 1 1 1
Condenser
Total Chiller Coil Face Area ft2 150 150 150 150 199
Number of Coils EA 6 6 6 6 8
Number of rows EA 5 5 6 6 6
Compact
Fins per inch FPI 14 14 14 14 14
Fans
Number EA 6 6 6 6 8
Fan Motor kW 21 21 21 21 28
Fan Speed RPM 1,150 1,150 1,150 1,150 1,150
Fan Diameter inch 35.4 35.4 35.4 35.4 35.4
Total Chiller Airflow cfm 98,887 98,887 98,887 98,887 131,849
Evaporator
Evaporator type Flooded Flooded Flooded Flooded Flooded
Water Volume gal 32 32 36 36 41
Maximum Water Side Pressure psig 145 145 145 145 145
Maximum Refrigerant Side Pressure psig 348 348 348 348 348
Minimum Chilled Water Flow Rate gpm 106.0 116.2 128.5 137.7 149.6
Maximum Chilled Water Flow Rate gpm 423.9 464.8 513.9 550.7 598.4
Water Connections
Water Connections Main pipe (Branch) DIN 100 100 100 100 100
Drain (NPT) inch 1 1 1 1 1
Dimensions
Length inch 157.5 157.5 157.5 157.5 200.8
Width inch 86.6 86.6 86.6 86.6 86.6
Height inch 92.5 92.5 92.5 92.5 92.5
NOTES:
1. Cooling conditions: Ambient temperature is 95°F, chilled water temperature outlet is 44°F. Temperature difference is 10°F.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection pipes are in compliance with DIN standards.
CHILLER 60Hz/R134a _ 13
Air-Cooled Screw
8. Specifications English Unit
Air Cooled Screw Chiller Model RCAW1509BAA RCAW1709BAA RCAW1809BAA RCAW2009BAA RCAW2209BAA
General Unit Data
Unit Capacity at ARI Conditions Tons 146.4 165.9 175.8 193.9 214.4
Number of Independent Refrigerant Circuits 1 1 1 2 2
Refrigerant Charge, R-134a lbs 683 794 816 469 / 469 520 / 520
Oil Charge gal 14.5 16.3 16.9 11.0 / 11.0 12.2 / 12.2
Weight
Shipping Weight Aluminum Fin Coils lb 13,082 15,784 15,959 19,733 20,083
Copper Fin Coils lb 14,112 17,056 17,231 21,307 21,657
Operating Weight Aluminum Fin Coils lb 13,453 16,187 16,391 20,266 20,682
Copper Fin Coils lb 14,482 17,459 17,663 21,840 22,256
Compressors
Compressor type Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw
Quantity EA 1 1 1 2 2
Condenser
Total Chiller Coil Face Area ft2 199 250 250 299 299
Number of Coils EA 8 10 10 6/6 6/6
Compact
Number of rows EA 6 6 6 5 6
Fins per inch FPI 14 14 14 14 14
Fans
Number EA 8 10 10 6/6 6/6
Fan Motor kW 28 35 35 21 / 21 21 / 21
Fan Speed RPM 1,150 1,150 1,150 1,150 1,150
Fan Diameter inch 35.4 35.4 35.4 35.4 35.4
Total Chiller Airflow cfm 131,849 164,812 164,812 197,774 197,774
Evaporator
Evaporator type Flooded Flooded Flooded Flooded Flooded
Water Volume gal 44 48 52 64 72
Maximum Water Side Pressure psig 145 145 145 145 145
Maximum Refrigerant Side Pressure psig 348 348 348 348 348
Minimum Chilled Water Flow Rate gpm 175.5 198.8 210.7 232.4 257.0
Maximum Chilled Water Flow Rate gpm 702.0 795.3 842.8 929.7 1027.8
Water Connections
Water Connections Main pipe (Branch) DIN 150 150 150 100 / 100 100 / 100
Drain (NPT) inch 1 1 1 1/1 1/1
Dimensions
Length inch 200.8 248.0 248.0 304.1 304.1
Width inch 86.6 86.6 86.6 86.6 86.6
Height inch 92.5 92.5 92.5 92.5 92.5
NOTES:
1. Cooling conditions: Ambient temperature is 95°F, chilled water temperature outlet is 44°F. Temperature difference is 10°F.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection pipes are in compliance with DIN standards.
14 _ CHILLER 60Hz/R134a
Air-Cooled Screw
8. Specifications English Unit
Air Cooled Screw Chiller Model RCAW2409BAA RCAW2609BAA RCAW3009BAA RCAW3409BAA RCAW3609BAA
General Unit Data
Unit Capacity at ARI Conditions Tons 229.7 249.6 292.9 331.8 351.6
Number of Independent Refrigerant Circuits 2 2 2 2 2
Refrigerant Charge, R-134a lbs 551 / 551 617 / 617 683 / 683 794 / 794 816 / 816
Oil Charge gal 12.8 / 12.8 10.6 / 10.6 14.5 / 14.5 16.3 / 16.3 16.9 / 16.9
Weight
Shipping Weight Aluminum Fin Coils lb 20,412 24,833 26,164 31,567 31,917
Copper Fin Coils lb 21,986 26,892 28,224 34,111 34,461
Operating Weight Aluminum Fin Coils lb 21,012 25,516 26,905 32,374 32,781
Copper Fin Coils lb 22,586 27,575 28,964 34,918 35,325
Compressors
Compressor type Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw
Quantity EA 2 2 2 2 2
Condenser
Total Chiller Coil Face Area ft2 299 398 398 499 499
Number of Coils EA 6/6 8/8 8/8 10 / 10 10 / 10
Compact
Number of rows EA 6 6 6 6 6
Fins per inch FPI 14 14 14 14 14
Fans
Number EA 6/6 8/8 8/8 10 / 10 10 / 10
Fan Motor kW 21 / 21 28 / 28 28 / 28 35 / 35 35 / 35
Fan Speed RPM 1,150 1,150 1,150 1,150 1,150
Fan Diameter inch 35.4 35.4 35.4 35.4 35.4
Total Chiller Airflow cfm 197,774 263,699 263,699 329,623 329,623
Evaporator
Evaporator type Flooded Flooded Flooded Flooded Flooded
Water Volume gal 72 82 89 97 104
Maximum Water Side Pressure psig 145 145 145 145 145
Maximum Refrigerant Side Pressure psig 348 348 348 348 348
Minimum Chilled Water Flow Rate gpm 275.4 299.2 351.0 397.6 421.4
Maximum Chilled Water Flow Rate gpm 1101.4 1196.9 1404.1 1590.5 1685.5
Water Connections
Water Connections Main pipe (Branch) DIN 100 / 100 100 / 100 150 / 150 150 / 150 150 / 150
Drain (NPT) inch 1/1 1/1 1/1 1/1 1/1
Dimensions
Length inch 304.1 390.7 390.7 485.2 485.2
Width inch 86.6 86.6 86.6 86.6 86.6
Height inch 92.5 92.5 92.5 92.5 92.5
NOTES:
1. Cooling conditions: Ambient temperature is 95°F, chilled water temperature outlet is 44°F. Temperature difference is 10°F.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection pipes are in compliance with DIN standards.
CHILLER 60Hz/R134a _ 15
Air-Cooled Screw
8. Specifications English Unit
Number of rows EA 6 6 6 6
Fins per inch FPI 14 14 14 14
Fans
Number EA 8/8/8 8/8/8 10 / 10 / 10 10 / 10 / 10
Fan Motor kW 28 / 28 / 28 28 / 28 / 28 35 / 35 / 35 35 / 35 / 35
Fan Speed RPM 1,150 1,150 1,150 1,150
Fan Diameter inch 35.4 35.4 35.4 35.4
Total Chiller Airflow cfm 395,548 395,548 494,435 494,435
Evaporator
Evaporator type Flooded Flooded Flooded Flooded
Water Volume gal 123 133 145 155
Maximum Water Side Pressure psig 145 145 145 145
Maximum Refrigerant Side Pressure psig 348 348 348 348
Minimum Chilled Water Flow Rate gpm 448.8 526.5 596.5 632.1
Maximum Chilled Water Flow Rate gpm 1795.3 2106.1 2385.8 2528.3
Water Connections
Water Connections Main pipe (Branch) DIN 100 / 100 / 100 150 / 150 / 150 150 / 150 / 150 150 / 150 / 150
Drain (NPT) inch 1/1/1 1/1/1 1/1/1 1/1/1
Dimensions
Length inch 591.5 591.5 733.3 733.3
Width inch 86.6 86.6 86.6 86.6
Height inch 92.5 92.5 92.5 92.5
NOTES:
1. Cooling conditions: Ambient temperature is 95°F, chilled water temperature outlet is 44°F. Temperature difference is 10°F.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection pipes are in compliance with DIN standards.
16 _ CHILLER 60Hz/R134a
Air-Cooled Screw
8. Specifications SI Unit
Air Cooled Screw Chiller Model RCAW0409BAA RCAW0509BAA RCAW0609BAA RCAW0709BAA RCAW0809BAA
General Unit Data
Unit Capacity at ARI Conditions kW 134 167 204 236 271
Number of Independent Refrigerant Circuits 1 1 1 1 1
Refrigerant Charge, R-134a kg 83 102 130 148 167
Oil Charge l 17 22 25 31 36
Weight
Shipping Weight Aluminum Fin Coils kg 3,305 3,333 4,077 4,119 4,146
Copper Fin Coils kg 3,518 3,546 4,400 4,442 4,469
Operating Weight Aluminum Fin Coils kg 3,385 3,413 4,167 4,225 4,252
Copper Fin Coils kg 3,598 3,626 4,490 4,548 4,575
Compressors
Compressor type Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw
Quantity EA 1 1 1 1 1
Condenser
Total Chiller Coil Face Area m2 8 8 12 12 12
Number of Coils EA 4 4 6 6 6
Number of rows EA 6 6 6 6 6
Compact
Fins per inch FPI 14 14 14 14 14
Fans
Number EA 4 4 6 6 6
Fan Motor kW 7 7 11 11 11
Fan Speed RPM 680 680 680 680 680
Fan Diameter mm 750 750 750 750 750
Total Chiller Airflow l/s 15,555 15,555 23,333 23,333 23,333
Evaporator
Evaporator type Flooded Flooded Flooded Flooded Flooded
Water Volume l 80 80 90 106 106
Maximum Water Side Pressure Bar 10 10 10 10 10
Maximum Refrigerant Side Pressure Bar 24 24 24 24 24
Minimum Chilled Water Flow Rate l/s 2.9 3.6 4.4 5.1 5.8
Maximum Chilled Water Flow Rate l/s 11.5 14.4 17.5 20.3 23.3
Water Connections
Water Connections Main pipe (Branch) DIN 90 90 100 100 100
Drain (NPT) mm 32 32 32 32 32
Dimensions
Length mm 2,700 2,700 3,500 3,500 3,500
Width mm 2,200 2,200 2,200 2,200 2,200
Height mm 2,350 2,350 2,350 2,350 2,350
NOTES:
1. Cooling conditions: Ambient temperature is 35°C, chilled water temperature outlet is 6.7°C. Temperature difference is 5.6°C.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection pipes are in compliance with DIN standards.
CHILLER 60Hz/R134a _ 17
Air-Cooled Screw
8. Specifications SI Unit
Air Cooled Screw Chiller Model RCAW0909BAA RCAW1009BAA RCAW1109BAA RCAW1209BAA RCAW1309BAA
General Unit Data
Unit Capacity at ARI Conditions kW 311 341 377 404 439
Number of Independent Refrigerant Circuits 1 1 1 1 1
Refrigerant Charge, R-134a kg 194 213 236 250 280
Oil Charge l 40 42 46 48 40
Weight
Shipping Weight Aluminum Fin Coils kg 4,429 4,475 4,555 4,629 5,632
Copper Fin Coils kg 4,786 4,832 4,912 4,986 6,099
Operating Weight Aluminum Fin Coils kg 4,550 4,596 4,691 4,765 5,787
Copper Fin Coils kg 4,907 4,953 5,048 5,122 6,254
Compressors
Compressor type Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw
Quantity EA 1 1 1 1 1
Condenser
Total Chiller Coil Face Area m2 14 14 14 14 19
Number of Coils EA 6 6 6 6 8
Number of rows EA 5 5 6 6 6
Compact
NOTES:
1. Cooling conditions: Ambient temperature is 35°C, chilled water temperature outlet is 6.7°C. Temperature difference is 5.6°C.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection pipes are in compliance with DIN standards.
18 _ CHILLER 60Hz/R134a
Air-Cooled Screw
8. Specifications SI Unit
Air Cooled Screw Chiller Model RCAW1509BAA RCAW1709BAA RCAW1809BAA RCAW2009BAA RCAW2209BAA
General Unit Data
Unit Capacity at ARI Conditions kW 515 583 618 682 754
Number of Independent Refrigerant Circuits 1 1 1 2 2
Refrigerant Charge, R-134a kg 310 360 370 213 / 213 236 / 236
Oil Charge l 55 62 64 42 / 42 46 / 46
Weight
Shipping Weight Aluminum Fin Coils kg 5,934 7,159 7,239 8,951 9,109
Copper Fin Coils kg 6,401 7,736 7,816 9,665 9,823
Operating Weight Aluminum Fin Coils kg 6,102 7,342 7,435 9,193 9,381
Copper Fin Coils kg 6,569 7,919 8,012 9,907 10,095
Compressors
Compressor type Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw
Quantity EA 1 1 1 2 2
Condenser
Total Chiller Coil Face Area m2 19 23 23 28 28
Number of Coils EA 8 10 10 6/6 6/6
Number of rows EA 6 6 6 5 6
Compact
Fins per inch FPI 14 14 14 14 14
Fans
Number EA 8 10 10 6/6 6/6
Fan Motor kW 28 35 35 21 / 21 21 / 21
Fan Speed RPM 1,150 1,150 1,150 1,150 1,150
Fan Diameter mm 900 900 900 900 900
Total Chiller Airflow l/s 62,222 77,778 77,778 93,334 93,334
Evaporator
Evaporator type Flooded Flooded Flooded Flooded Flooded
Water Volume l 168 183 196 242 272
Maximum Water Side Pressure Bar 10 10 10 10 10
Maximum Refrigerant Side Pressure Bar 24 24 24 24 24
Minimum Chilled Water Flow Rate l/s 11.1 12.5 13.3 14.7 16.2
Maximum Chilled Water Flow Rate l/s 44.3 50.2 53.2 58.7 64.8
Water Connections
Water Connections Main pipe (Branch) DIN 150 150 150 100 / 100 100/100
Drain (NPT) mm 32 32 32 32 / 32 32 / 32
Dimensions
Length mm 5,100 6,300 6,300 7,725 7,725
Width mm 2,200 2,200 2,200 2,200 2,200
Height mm 2,350 2,350 2,350 2,350 2,350
NOTES:
1. Cooling conditions: Ambient temperature is 35°C, chilled water temperature outlet is 6.7°C. Temperature difference is 5.6°C.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection pipes are in compliance with DIN standards.
CHILLER 60Hz/R134a _ 19
Air-Cooled Screw
8. Specifications SI Unit
Air Cooled Screw Chiller Model RCAW2409BAA RCAW2609BAA RCAW3009BAA RCAW3409BAA RCAW3609BAA
General Unit Data
Unit Capacity at ARI Conditions kW 808 878 1,030 1,167 1,236
Number of Independent Refrigerant Circuits 2 2 2 2 2
Refrigerant Charge, R-134a kg 250 / 250 280 / 280 310 / 310 360 / 360 370 / 370
Oil Charge l 48 / 48 40 / 40 55 / 55 62 / 62 64 / 64
Weight
Shipping Weight Aluminum Fin Coils kg 9,259 11,264 11,868 14,319 14,477
Copper Fin Coils kg 9,973 12,198 12,802 15,473 15,631
Operating Weight Aluminum Fin Coils kg 9,531 11,574 12,204 14,685 14,869
Copper Fin Coils kg 10,245 12,508 13,138 15,839 16,023
Compressors
Compressor type Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw Semihermetic Twin Screw
Quantity EA 2 2 2 2 2
Condenser
Total Chiller Coil Face Area m2 28 37 37 46 46
Number of Coils EA 6/6 8/8 8/8 10 / 10 10 / 10
Number of rows EA 6 6 6 6 6
Compact
NOTES:
1. Cooling conditions: Ambient temperature is 35°C, chilled water temperature outlet is 6.7°C. Temperature difference is 5.6°C.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection pipes are in compliance with DIN standards.
20 _ CHILLER 60Hz/R134a
Air-Cooled Screw
8. Specifications SI Unit
Compact
Fins per inch FPI 14 14 14 14
Fans
Number EA 8/8/8 8/8/8 10 / 10 / 10 10 / 10 / 10
Fan Motor kW 28 / 28 / 28 28 / 28 / 28 35 / 35 / 35 35 / 35 / 35
Fan Speed RPM 1,150 1,150 1,150 1,150
Fan Diameter mm 900 900 900 900
Total Chiller Airflow l/s 186,667 186,667 233,334 233,334
Evaporator
Evaporator type Flooded Flooded Flooded Flooded
Water Volume l 465 504 549 588
Maximum Water Side Pressure Bar 10 10 10 10
Maximum Refrigerant Side Pressure Bar 24 24 24 24
Minimum Chilled Water Flow Rate l/s 28.3 33.2 37.6 39.9
Maximum Chilled Water Flow Rate l/s 113.3 132.9 150.5 159.5
Water Connections
Water Connections Main pipe (Branch) DIN 100 / 100 / 100 150 / 150 / 150 150 / 150 / 150 150 / 150 / 150
Drain (NPT) mm 32 / 32 / 32 32 / 32 / 32 32 / 32 / 32 32 / 32 / 32
Dimensions
Length mm 15,025 15,025 18,625 18,625
Width mm 2,200 2,200 2,200 2,200
Height mm 2,350 2,350 2,350 2,350
NOTES:
1. Cooling conditions: Ambient temperature is 35°C, chilled water temperature outlet is 6.7°C. Temperature difference is 5.6°C.
2. Evaporator connection pipe : Flange connection.
3. Unit conversion 1kW = 860kcal/h, 1RT = 3.517kW.
4. Due to our policy of innovation some specifications may be changed without prior notification.
5. Water Connection pipes are in compliance with DIN standards.
CHILLER 60Hz/R134a _ 21
Air-Cooled Screw
8. Specifications (cont)
C D D E F
B A B A
Model Total Total
C D C D
C B A C B A
Model Total Total
D E F D E F
22 _ CHILLER 60Hz/R134a
Air-Cooled Screw
8. Specifications (cont)
B A B A
Model Total Total
C D C D
C B A C B A
Model Total Total
D E F D E F
Compact
486 1,105 633 1,071 2,436 1,395
CHILLER 60Hz/R134a _ 23
Compact
RCAW0409BAA, RCAW0509BAA
NO DESCRIPTION
01 Evaporator
02 Compressor
03 Condenser
09 11 10 06
04 Power box
05 Control box
Air-Cooled Screw
05
06 Fan
24 _ CHILLER 60Hz/R134a
07 Fan Motor
08 08 Receiver
09 Economizer
04 10 Oil separater
11 Oil filter
12 Filter drier
13 Lower pressure gauge
14 High pressure gauge
Chilled water outlet (upper)
15
9. Dimensional Drawings
NOTE
TOP 1. Dimensions are in mm(inch).
2. Main Power entry from Bottom
side of Power Box.
07 03
AIR AIR AIR AIR
LG
14 08
6
3 9
0
12
High
-76 MPa 15
15
10 25
5
30
LOW
-76 MPa 35
13 01
02
2350(92.5)
2150(84.6)
15
2400(94.5)
2200(86.6)
2700(106.3)
12 16
FRONT SIDE
RCAW0609BAA, RCAW0709BAA, RCAW0809BAA
NO DESCRIPTION
01 Evaporator
02 Compressor
03 Condenser
09 11 10 06 04 Power box
05 Control box
Air-Cooled Screw
05 06 Fan
07 Fan Motor
08 Receiver
08 09 Economizer
10 Oil separater
04 11 Oil filter
12 Filter drier
13 Lower pressure gauge
14 High pressure gauge
Chilled water outlet (upper)
15
Chilled water inlet (lower)
9. Dimensional Drawings
16 Lifting holes
NOTE
1. Dimensions are in mm(inch).
TOP 2. Main Power entry from Bottom
side of Power Box.
07 03
AIR AIR AIR AIR AIR
LG
14 08
6
3 9
0
12
High
-76 MPa 15
15
10 25
5
30
LOW
-76 MPa 35
13
02 01
2350(92.5)
2150(84.6)
15
3200(126) 2200(86.6)
3500(137.8)
12 16
FRONT SIDE
CHILLER 60Hz/R134a _ 25
Compact
Compact
05 06 Fan
26 _ CHILLER 60Hz/R134a
07 Fan Motor
08 08 Receiver
09 Economizer
10 Oil separater
04
11 Oil filter
12 Filter drier
13 Lower pressure gauge
14 High pressure gauge
Chilled water outlet (upper)
15
Chilled water inlet (lower)
9. Dimensional Drawings
16 Lifting holes
NOTE
1. Dimensions are in mm(inch).
TOP 2. Main Power entry from Bottom
side of Power Box.
06 07 03
LG
14 6
08
3 9
0
12
High
-76 MPa 15
15
10 25
5
30
LOW
-76 MPa 35
13 01
2350(92.5)
2150(84.6)
02
15
3700(145.6) 2200(86.6)
4000(157.5)
12 16
FRONT SIDE
RCAW1309BAA, RCAW1509BAA
NO DESCRIPTION
01 Evaporator
02 Compressor
03 Condenser
09 04 Power box
11 10 06
05 Control box
06 Fan
Air-Cooled Screw
05
07 Fan Motor
08 Receiver
08 09 Economizer
10 Oil separater
04 11 Oil filter
12 Filter drier
13 Lower pressure gauge
14 High pressure gauge
Chilled water outlet (upper)
15
Chilled water inlet (lower)
9. Dimensional Drawings
16 Lifting holes
NOTE
1. Dimensions are in mm(inch).
TOP 2. Main Power entry from Bottom
14 side of Power Box.
13 06 07 03
LG
6
08
3 9
0
12
High
-76 MPa 15
15
10 25
5
30
LOW
-76 MPa 35
01
02
2350(92.5)
2150(84.6)
15
4800(189)
2200(86.6)
5100(200.8)
12 16
FRONT SIDE
CHILLER 60Hz/R134a _ 27
Compact
Compact
RCAW1709BAA, RCAW1809BAA
NO DESCRIPTION
01 Evaporator
02 Compressor
03 Condenser
04 Power box
09 11 10 06 05 Control box
06 Fan
Air-Cooled Screw
05 07 Fan Motor
28 _ CHILLER 60Hz/R134a
08 Receiver
09 Economizer
08
10 Oil separater
11 Oil filter
04
12 Filter drier
13 Lower pressure gauge
14 High pressure gauge
Chilled water outlet (upper)
15
Chilled water inlet (lower)
9. Dimensional Drawings
16 Lifting holes
NOTE
1. Dimensions are in mm(inch).
2. Main Power entry from Bottom
TOP side of Power Box.
14
13 06 07 03
LG
3
6
08
9
0
12
High
-76 MPa 15
15
10 25
5
30
LOW
-76 MPa 35
02 01
2350(92.5)
2100(84.6)
15
6000(236.2) 2200(86.6)
6300(248.8)
12 16
FRONT SIDE
RCAW2009BAA, RCAW2209BAA, RCAW2409BAA
NO DESCRIPTION
01 Evaporator
02 Compressor
03 Condenser
09 11 10 06
04 Power box
05 Control box
06 Fan
07 Fan Motor
Air-Cooled Screw
08 Receiver
09 Economizer
04 10 Oil separater
11 Oil filter
12 Filter drier
13 Lower pressure gauge
14 High pressure gauge
Chilled water outlet (upper)
15
Chilled water inlet (lower)
16 Lifting holes
9. Dimensional Drawings
NOTE
TOP 1. Dimensions are in mm(inch).
2. Main Power entry from Bottom
side of Power Box.
14
13 06 07 03
AIR AIR AIR AIR AIR AIR AIR AIR
LG
05
0
3
-76
High
6
15
9
12
0
3
-76
High
6
15
9
12
08
MPa MPa
15 15
10 25 10 25
5 5
30 30
LOW LOW
-76 MPa 35 -76 MPa 35
01
02
2150(84.6)
2350(93.5)
15
12 16
FRONT SIDE
CHILLER 60Hz/R134a _ 29
Compact
Compact
NO DESCRIPTION
RCAW2609BAA, RCAW3009BAA 01 Evaporator
02 Compressor
03 Condenser
04 Power box
05 Control box
06 Fan
09 11 10 06 07 Fan Motor
Air-Cooled Screw
08 Receiver
30 _ CHILLER 60Hz/R134a
09 Economizer
10 Oil separater
11 Oil filter
12 Filter drier
04 13 Lower pressure gauge
14 High pressure gauge
Chilled water outlet (upper)
15
Chilled water inlet (lower)
16 Lifting holes
9. Dimensional Drawings
NOTE
1. Dimensions are in mm(inch).
2. Main Power entry from Bottom
TOP side of Power Box.
14
13 07 03
AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR
LG
05
0
3
6
12
0
3
6
12
08
High High
-76 MPa 15 -76 MPa 15
15 15
10 25 10 25
5 5
30 30
LOW LOW
-76 MPa 35 -76 MPa 35
01
02
2150(84.6)
2350(93.5)
15
12 16
FRONT SIDE
RCAW3409BAA, RCAW3609BAA NO DESCRIPTION
01 Evaporator
02 Compressor
03 Condenser
04 Power box
05 Control box
06 Fan
07 Fan Motor
Air-Cooled Screw
08 Receiver
09 11 10 06 09 Economizer
10 Oil separater
11 Oil filter
12 Filter drier
13 Lower pressure gauge
14 High pressure gauge
04
Chilled water outlet (upper)
15
Chilled water inlet (lower)
16 Lifting holes
9. Dimensional Drawings
NOTE
1. Dimensions are in mm(inch).
2. Main Power entry from Bottom
side of Power Box.
TOP
14
13 06 07 03
AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR
LG
05
0
3
High
6
12
0
3
High
6
12
08
-76 MPa 15 -76 MPa 15
15 15
10 25 10 25
5 5
30 30
LOW LOW
-76 MPa 35 -76 MPa 35
01
02
2150(84.6)
2350(93.5)
15
13 14
CHILLER 60Hz/R134a _ 31
Compact
Compact
09 11 10 06 08 Receiver
32 _ CHILLER 60Hz/R134a
09 Economizer
10 Oil separater
11 Oil filter
12 Filter drier
04
13 Lower pressure gauge
14 High pressure gauge
Chilled water outlet (upper)
15
Chilled water inlet (lower)
16 Lifting holes
9. Dimensional Drawings
NOTE
TOP 1. Dimensions are in mm(inch).
2. Main Power entry from Bottom
side of Power Box.
14
13 06 07 03
AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR
LG
05
6 6 6
3 9 3 9 3 9
-76
High
MPa 15
12
0
-76
High
MPa 15
12
0
-76
High
MPa 15
12
08
15 15 15
10 25 10 25 10 25
5 5 5
30 30 30
02 01
2150(84.6)
2350(93.5)
13 14 15
08 Receiver
09 Economizer
10 Oil separater
09 11 10 06 11 Oil filter
12 Filter drier
13 Lower pressure gauge
14 High pressure gauge
04 Chilled water outlet (upper)
15
Chilled water inlet (lower)
16 Lifting holes
9. Dimensional Drawings
NOTE
1. Dimensions are in mm(inch).
2. Main Power entry from Bottom
TOP side of Power Box.
14
13
06 07 03
AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR
05 LG
08
6 6 6
3 9 3 9 3 9
0 0 0
12 12 12
15 15 15
10 25 10 25 10 25
5 5 5
30 30 30
01
02
2150(84.6)
2350(93.5)
13 14 13 14
15
18000(708.6)
18625(733.3)
FRONT 12 16 SIDE
CHILLER 60Hz/R134a _ 33
Compact
Air-Cooled Screw
10. Selection procedure
LG Chiller selection program helps to select LG air cooled screw chiller quickly and easi-
ly.
To select RCAW series chiller, use the LAT’s Chiller (Computerized) selection program or
follow one of the procedures below.
1) Determine RCAW series unit size and operating conditions required to meet given
capacity at given conditions.
English SI
Given: Given:
Capacity ............................................150 Tons Capacity............................................527.4 kW
Leaving Chilled Water Temp (LCWT)..........44°F Leaving Chilled Water Temp (LCWT).........6.7°C
Compact
Evaporator Water Temp Reduction ............10°F Evaporator Water Temp Reduction ...........5.6°C
Condenser Entering Air Temp ....................95°F Condenser Entering Air Temp....................35°C
2
Fouling Factor .....................0.0001 (ft ·hr·F/ Btu) Fouling Factor .....................0.0186 (m2·°C/kW)
NOTE: For other than 10°F temperature NOTE: For other than 5.6°C temperature
Reduction, contact nearest LG office. Reduction, contact nearest LG office.
2) From Cooling Capacities table and pressure drop curves, determine operating
data for selected unit.
English SI
34 _ CHILLER 60Hz/R134a
Air-Cooled Screw
11. Performance Data
RCAW0409BAA [IPLV 11.8]
AIR TEMPERATURE ON CONDENSER (°F)
LCWT(°F) 75 80 85 90 95 100
Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER
40 39.1 37.7 12.42 38.0 39.1 11.66 37.0 40.7 10.89 35.9 42.6 10.12 34.8 44.8 9.34 33.8 46.8 8.66
42 40.4 38.1 12.75 39.4 39.4 12.01 38.4 41.0 11.25 37.4 42.9 10.46 36.4 45.1 9.69 35.4 47.1 9.02
44 41.9 38.3 13.12 41.0 39.7 12.37 40.0 41.2 11.64 39.1 43.2 10.84 38.1 45.4 10.07 37.1 47.5 9.39
45 42.5 38.5 13.25 41.6 39.9 12.52 40.7 41.2 11.84 39.8 43.5 10.97 38.9 45.8 10.19 38.0 47.9 9.52
46 43.3 38.6 13.44 42.4 40.0 12.71 41.5 41.7 11.94 40.6 43.6 11.17 39.7 45.7 10.41 38.8 47.8 9.73
48 44.6 38.8 13.79 43.7 40.3 13.03 42.9 41.9 12.28 42.0 43.9 11.49 41.2 46.1 10.73 40.3 48.2 10.05
50 46.5 39.1 14.27 45.7 40.6 13.50 44.9 42.2 12.74 44.1 44.2 11.96 43.2 46.5 11.17 42.4 48.6 10.49
52 48.0 39.4 14.65 47.3 40.9 13.88 46.5 42.5 13.12 45.7 44.5 12.34 45.0 46.8 11.52 44.2 48.9 10.84
Compact
48 39.5 50.2 9.43 38.6 52.3 8.87 37.8 54.4 8.34 37.0 56.5 7.85 36.1 58.5 7.40
50 41.6 50.6 9.87 40.8 52.7 9.29 40.0 54.8 8.76 39.2 56.9 8.27 38.4 59.0 7.82
52 43.4 51.0 10.22 42.7 53.1 9.64 41.9 55.2 9.11 41.1 57.3 8.62 40.4 59.4 8.16
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
CHILLER 60Hz/R134a _ 35
Air-Cooled Screw
11. Performance Data
48 60.1 71.6 10.08 58.8 74.6 9.47 57.5 77.5 8.91 56.3 80.5 8.39 55.0 83.4 7.90
50 63.4 72.2 10.54 62.2 75.2 9.92 61.0 78.1 9.36 59.7 81.1 8.84 58.5 84.1 8.35
52 66.1 72.7 10.91 65.0 75.7 10.30 63.8 78.7 9.73 62.6 81.6 9.20 61.5 84.6 8.71
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
36 _ CHILLER 60Hz/R134a
Air-Cooled Screw
11. Performance Data
RCAW0809BAA [IPLV 12.0]
AIR TEMPERATURE ON CONDENSER (°F)
LCWT(°F) 75 80 85 90 95 100
Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER
40 79.0 74.7 12.70 76.9 77.4 11.92 74.7 80.6 11.13 72.6 84.2 10.34 70.5 88.6 9.55 68.3 92.6 8.85
42 81.8 75.3 13.03 79.8 78.0 12.28 77.7 81.1 11.49 75.7 84.9 10.69 73.7 89.2 9.91 71.6 93.3 9.21
44 84.8 75.9 13.40 82.8 78.6 12.65 80.9 81.6 11.90 79.0 85.6 11.07 77.1 89.9 10.29 75.1 93.9 9.60
45 85.9 76.1 13.55 84.1 78.9 12.80 82.3 81.6 12.10 80.5 86.1 11.21 78.7 90.6 10.41 76.8 94.7 9.73
46 87.5 76.4 13.74 85.7 79.1 12.99 83.9 82.5 12.20 82.1 86.2 11.42 80.2 90.5 10.64 78.4 94.6 9.95
48 90.2 76.8 14.09 88.4 79.7 13.32 86.7 82.9 12.55 85.0 86.8 11.75 83.3 91.2 10.96 81.6 95.3 10.27
50 94.0 77.3 14.58 92.3 80.3 13.80 90.7 83.6 13.02 89.1 87.5 12.22 87.5 91.9 11.41 85.8 96.1 10.72
52 97.1 77.9 14.97 95.6 80.9 14.18 94.0 84.1 13.41 92.5 88.0 12.61 90.9 92.6 11.78 89.4 96.8 11.08
Compact
48 79.9 99.4 9.64 78.2 103.5 9.06 76.4 107.6 8.52 74.7 111.7 8.03 73.0 115.8 7.56
50 84.2 100.2 10.08 82.6 104.3 9.50 81.0 108.5 8.96 79.3 112.6 8.46 77.7 116.7 7.99
52 87.8 100.9 10.44 86.3 105.0 9.86 84.7 109.2 9.31 83.2 113.3 8.81 81.6 117.5 8.34
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
CHILLER 60Hz/R134a _ 37
Air-Cooled Screw
11. Performance Data
48 100.5 126.1 9.56 98.3 131.3 8.99 96.2 136.5 8.45 94.0 141.7 7.96 91.9 146.9 7.50
50 106.0 127.1 10.00 103.9 132.4 9.42 101.9 137.6 8.88 99.8 142.8 8.39 97.8 148.1 7.92
52 110.5 128.0 10.36 108.6 133.3 9.77 106.6 138.5 9.23 104.7 143.8 8.73 102.7 149.0 8.27
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
38 _ CHILLER 60Hz/R134a
Air-Cooled Screw
11. Performance Data
Compact
48 119.1 153.9 9.28 116.5 160.2 8.72 114.0 166.6 8.21 111.4 173.0 7.73 108.9 179.3 7.28
50 125.6 155.2 9.71 123.1 161.5 9.15 120.7 167.9 8.62 118.3 174.3 8.14 115.9 180.7 7.69
52 130.9 156.2 10.05 128.6 162.7 9.49 126.3 169.1 8.96 124.0 175.5 8.48 121.7 181.9 8.03
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
CHILLER 60Hz/R134a _ 39
Air-Cooled Screw
11. Performance Data
48 151.8 196.6 9.26 148.5 204.8 8.70 145.3 212.9 8.19 142.0 221.0 7.71 138.8 229.1 7.27
50 160.0 198.2 9.69 157.0 206.4 9.12 153.9 214.6 8.60 150.8 222.7 8.12 147.7 230.9 7.67
52 166.9 199.7 10.03 164.0 207.8 9.47 161.0 216.0 8.94 158.1 224.2 8.46 155.1 232.4 8.01
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
40 _ CHILLER 60Hz/R134a
Air-Cooled Screw
11. Performance Data
Compact
48 182.2 228.2 9.58 178.3 237.6 9.00 174.4 247.1 8.47 170.5 256.5 7.97 166.6 265.9 7.52
50 192.1 230.1 10.02 188.4 239.6 9.44 184.7 249.0 8.90 181.0 258.5 8.40 177.3 268.0 7.94
52 200.4 231.7 10.38 196.8 241.2 9.79 193.3 250.7 9.25 189.8 260.2 8.75 186.2 269.7 8.28
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
CHILLER 60Hz/R134a _ 41
Air-Cooled Screw
11. Performance Data
48 222.2 284.3 9.38 217.5 296.0 8.81 212.7 307.7 8.29 207.9 319.5 7.81 203.2 331.2 7.36
50 234.3 286.6 9.81 229.8 298.4 9.24 225.3 310.2 8.71 220.8 322.0 8.23 216.2 333.8 7.77
52 244.4 288.6 10.16 240.1 300.5 9.59 235.8 312.3 9.06 231.4 324.1 8.57 227.1 336.0 8.11
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
42 _ CHILLER 60Hz/R134a
Air-Cooled Screw
11. Performance Data
Compact
48 258.8 329.1 9.43 253.2 342.7 8.86 247.7 356.3 8.34 242.1 369.9 7.85 236.6 383.5 7.40
50 272.9 331.9 9.86 267.6 345.5 9.29 262.3 359.2 8.76 257.1 372.9 8.27 251.8 386.5 7.82
52 284.6 334.2 10.22 279.6 347.9 9.64 274.5 361.6 9.11 269.5 375.3 8.62 264.5 389.0 8.16
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
CHILLER 60Hz/R134a _ 43
Air-Cooled Screw
11. Performance Data
RCAW3409BAA [IPLV 11.8]
AIR TEMPERATURE ON CONDENSER (°F)
LCWT(°F) 75 80 85 90 95 100
Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER
40 340.3 328.7 12.42 331.1 340.7 11.66 321.8 354.7 10.89 312.6 370.6 10.12 303.4 389.8 9.34 294.1 407.6 8.66
42 352.2 331.5 12.75 343.4 343.1 12.01 334.6 357.0 11.24 325.9 373.8 10.46 317.1 392.6 9.69 308.4 410.4 9.01
44 364.9 333.9 13.11 356.6 345.9 12.37 348.4 359.0 11.64 340.1 376.6 10.83 331.8 395.5 10.07 323.5 413.4 9.39
45 370.0 335.0 13.25 362.2 347.1 12.52 354.3 359.0 11.84 346.5 379.0 10.97 338.6 398.9 10.18 330.8 416.9 9.52
46 376.7 336.3 13.44 368.9 348.3 12.71 361.1 363.0 11.93 353.3 379.4 11.17 345.5 398.4 10.41 337.7 416.4 9.73
48 388.2 337.9 13.78 380.8 350.7 13.03 373.4 365.0 12.27 366.0 382.2 11.49 358.7 401.3 10.72 351.3 419.3 10.05
50 404.6 340.3 14.26 397.6 353.5 13.50 390.6 367.8 12.74 383.6 385.0 11.95 376.6 404.7 11.17 369.6 422.8 10.49
52 418.2 342.7 14.64 411.6 355.9 13.88 404.9 370.2 13.12 398.2 387.4 12.33 391.5 407.7 11.52 384.9 425.9 10.84
48 343.9 437.4 9.43 336.5 455.5 8.86 329.1 473.5 8.34 321.8 491.6 7.85 314.4 509.7 7.40
50 362.6 441.0 9.86 355.6 459.2 9.29 348.6 477.3 8.76 341.6 495.5 8.27 334.6 513.7 7.82
52 378.2 444.1 10.22 371.5 462.3 9.64 364.8 480.5 9.11 358.1 498.7 8.62 351.5 516.9 8.16
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
44 _ CHILLER 60Hz/R134a
Air-Cooled Screw
11. Performance Data
RCAW3909BAA [IPLV 11.8]
AIR TEMPERATURE ON CONDENSER (°F)
LCWT(°F) 75 80 85 90 95 100
Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER Tons Input kW EER
40 384.1 371.0 12.42 373.7 384.6 11.66 363.3 400.3 10.89 352.8 418.3 10.12 342.4 439.9 9.34 332.0 460.1 8.66
42 397.5 374.2 12.75 387.6 387.3 12.01 377.7 403.0 11.24 367.8 421.9 10.46 357.9 443.1 9.69 348.0 463.3 9.01
44 411.9 376.9 13.11 402.6 390.4 12.37 393.2 405.3 11.64 383.8 425.1 10.83 374.5 446.4 10.07 365.1 466.6 9.39
45 417.7 378.2 13.25 408.8 391.8 12.52 399.9 405.3 11.84 391.1 427.8 10.97 382.2 450.3 10.18 373.4 470.6 9.52
46 425.2 379.6 13.44 416.4 393.1 12.71 407.6 409.8 11.93 398.8 428.2 11.17 390.0 449.7 10.41 381.2 470.0 9.73
48 438.2 381.4 13.78 429.8 395.8 13.03 421.5 412.0 12.27 413.2 431.4 11.49 404.8 452.9 10.72 396.5 473.3 10.05
50 456.6 384.1 14.26 448.8 399.0 13.50 440.9 415.2 12.74 433.0 434.5 11.95 425.1 456.8 11.17 417.2 477.3 10.49
52 472.1 386.8 14.64 464.5 401.7 13.88 457.0 417.9 13.12 449.5 437.2 12.33 441.9 460.2 11.52 434.4 480.7 10.84
Compact
48 388.2 493.7 9.43 379.8 514.1 8.86 371.5 534.5 8.34 363.2 554.9 7.85 354.8 575.3 7.40
50 409.3 497.8 9.86 401.4 518.3 9.29 393.5 538.8 8.76 385.6 559.3 8.27 377.7 579.8 7.82
52 426.9 501.3 10.22 419.3 521.8 9.64 411.8 542.4 9.11 404.3 562.9 8.62 396.7 583.5 8.16
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
CHILLER 60Hz/R134a _ 45
Air-Cooled Screw
11. Performance Data
48 515.8 656.1 9.43 504.8 683.2 8.86 493.7 710.3 8.34 482.6 737.4 7.85 471.6 764.5 7.40
50 543.9 661.5 9.86 533.4 688.8 9.29 522.9 716.0 8.76 512.4 743.2 8.27 501.9 770.5 7.82
52 567.3 666.2 10.22 557.3 693.5 9.64 547.2 720.8 9.11 537.2 748.1 8.62 527.2 775.4 8.16
NOTES:
1. Consult LG Electronics representative for performance at temperatures.
2. EER = Energy Efficiency Ratio of Performance (Btu/watt-hour).
3. Power inputs include compressors, condenser fans, Control power and basic devices.
4. Ratings are based on an evaporator temperature drop of 10°F.
5. Ambient temperatures 115°F and greater reflect the high ambient condenser option.
6. For continual product development, Above specification might be changed without notice.
46 _ CHILLER 60Hz/R134a
Air-Cooled Screw
12. Pressure Drop
120
70 RT 80 RT
Pressure drop (kPa)
100 60 RT
50 RT
80 40 RT
60
40
20
Compact
0
0 5 10 15 20 25 30 35
Water flow rate (l/s)
40
70 RT 80 RT
35
60 RT
30 50 RT
40 RT
25
20
15
10
5
0
0 50 100 150 200 250 300 350 400 450 500
Water flow rate (gpm)
CHILLER 60Hz/R134a _ 47
Air-Cooled Screw
12. Pressure Drop
140
120
100
80
60
40
20
Compact
0
0 6 12 18 24 30 36 42 48 54 60
Water flow rate (l/s)
50
40
30
20
10
0
0 100 200 300 400 500 600 700 800 900
48 _ CHILLER 60Hz/R134a
Air-Cooled Screw
12. Pressure Drop
140 200 RT
120
100
80
60
40
20
Compact
0
0 10 20 30 40 50 60 70 80 90 100 110 120
Water flow rate (l/s)
70
360 RT
Pressure drop (ft wg)
60 300 RT 340 RT
260 RT
220 RT 240 RT
50
200 RT
40
30
20
10
0
0 200 400 600 800 1000 1200 1400 1600 1800
Water flow rate (gpm)
CHILLER 60Hz/R134a _ 49
Air-Cooled Screw
12. Pressure Drop
160
140
120
100
80
60
40
20
Compact
0
0 20 40 60 80 100 120 140 160 180
Water flow rate (l/s)
50
40
30
20
10
0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600
50 _ CHILLER 60Hz/R134a
No DESCRIPTION
1 Compressor
2 Condensing coil
3 Receiver
4 Oil Filter
5 Oil separater
6 Ejector for Oil Return
7,8 Expansion Devices
Air-Cooled Screw
9 Filter Drier
1 10 Evaporator
2 11 Economizer (Flash gas tank)
13. Piping Diagrams
LEGEND
SYMBOL DESCRIPTION
S
LPS OH Oil heater
TS WFS
NOTE
CHILLER 60Hz/R134a _ 51
Compact
Compact
RCAW0409BAA, RCAW0509BAA
R
LEGEND
S
T
SYMBO DESCRIPTION
N F1~F3 Fuse
380VAC 3P 4W
F3 CF1 C/BOX Heat dissipation fan
3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 R S T
1L1 1L1 3L2 5L3 FG CF2 P/BOX Heat dissipation fan
L
FN1A FN2A M1 4 37 R1
M2 VOLT AGE Assist relay
220VAC TO MAIN CONTROL
N MONITORING
2T1 4T2 6T3 2T1 4T2 6T3 M3 2T1 4T2 6T3 2T1 4T2 6T3 UNIT CCH1
L1 R 2 (5E) 47 N Oil heater
Air-Cooled Screw
40 THC
OLF1A OLF2A L2 T2 OLC1 CB Inner temperature controller
3.5A 3.5A
52 _ CHILLER 60Hz/R134a
107A
(2.5~5) (2.5~5) L3 T3 (100~135)
1 2 SV1 Oil separator solenoid valve
202
F1 SV2 Mid pressure air charging solenoid valve
3 3 2
L0 MV1 MV2 MV3 Comp capacity control valve(25%,50%,75%)
M1 F2 CCH1
8 9 M1 Comp magnet switch 1
U V START/STOP SWITCH
X W
M3 Comp magnet switch 3 ( Y connection)
FAN 1A FAN 2A Y COMP
4
Z
FN1A~FN2A Fan1A~Fan2 A magnet contactors
CF1
40 THC FN1B~FN2B Fan1B~Fan2B magnet contactors
11
TO MAIN CONTROL UNIT 47 1 CF2
12 INTERNAL OLF1A~OLF2A Fan1A~Fan2 A over current relays
2 2
PROTECTOR
2 R1 OLF1B~OLF2B Fan1B~Fan2B over current relays
(INT69) 4
4
4
220VAC OLC1 Comp over current relay
L N Emergency switch
+V -V
R1
LP Low pressure switch
1L1 3L2 5L3 1L1 3L2 5L3
26 27
HP 5E Reverse phase protector
M1
OIL LEVEL
2T1 4T2 6T3 2T1 4T2 6T3
24VDC-P
24VDC-G
5E
M2
INT69
OLF1B OLF2B
ANTI-FREEZING
FN1A 102 OLF1B 103
FN2A 105
3.5A 3.5A
LP
OLC1
(2.5~5) (2.5~5)
EMERGENCY SWITCH
REMOTE RUN
CHILLED WATER FLOW
OIL FLOW
110 FN2B 111
HIGH-LOW DIFFERENTIAL
OLF1A 101
OLF2A 104
OLF2B
26 27 10 11 12 13 14 15 16 17 18 19 27 47 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 27 47
+24V -24V RTD1 RTD1 RTD2 RTD2 RTD3RTD3 RTD4 RTD4 RTD5 RTD5 24V-G 24V I01 I02 I03 I04 I05 I06 I07 I08 I09 I10 I11 I12 I13 I14 I15 I16 24V-G 24V
-(2) +(1) -(4) +(3) -(6) +(5) -(8) +(7) -(10) +(9) Input (Secondary)
Input (Primary)
HMI
Output (Primary) MAIN CONTROL UNIT Output (Secondary)
UNIT O02 O03 O04 O05 O06 O07 O08 COM O09 O10 O15 O16 O17 O18 O19 O20
COM O01 O11 O12 O13 O14
4 7
M3 M2
EMRG
97 98
CHILLED WATER PUMP
FAULT
A1 A1 A1 A1 A1 A1 A1
A2 A2 A2 A2 A2 A2 A2
Note:
1. Field modifications or additions must be in compliance with national electrical code as well as all applicable codes and specifications.
2. Refer to certified dimension drawing for exact locations of the main power and control power entrance locations.
RCAW0609BAA, RCAW0709BAA, RCAW0809BAA
RCAW0909BAA, RCAW1009BAA, RCAW1109BAA , RCAW1209BAA
R
LEGEND
S
SYMBO DESCRIPTION
T
F1~F3 Fuse
N
380VAC 3P 4W
F3 CF1 C/BOX Heat dissipation fan
L N Emergency switch
4
L 4 SW1 Mold option switch
FN1B
FN3A
+V -V
R1
LP Low pressure switch
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3
26 27 5E Reverse phase protector
HP
M1
OIL LEVEL
2T1 4T2 6T3 2T1 4T2 6T3
24VDC-P
4T2 6T3
24VDC-G
2T1
5E
M2
INT69
OLF2B OLF3B
ANTI-FREEZING
OLF1B
FN1A 102 OLF1B 103
FN2A 105 OLF3A 106
OLC1
EMERGENCY SWITCH
REMOTE RUN
7A 7A 7A
CHILLED WATER FLOW
OIL FLOW
110 FN2B 111 OLF3B 112
HIGH-LOW DIFFERENTIAL
26 27 10 11 12 13 14 15 16 17 18 19 27 47 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 27 47
+24V -24V RTD1 RTD1 RTD2 RTD2 RTD3RTD3 RTD4 RTD4 RTD5 RTD5 24V-G 24V I01 I02 I03 I04 I05 I06 I07 I08 I09 I10 I11 I12 I13 I14 I15 I16 24V-G 24V
-(2) +(1) -(4) +(3) -(6) +(5) -(8) +(7) -(10) +(9) Input (Secondary)
Input (Primary)
HMI
Output (Primary) MAIN CONTROL UNIT Output (Secondary)
UNIT O02 O03 O04 O05 O06 O07 O08 COM O09 O10 O11 O12 O13 O14 O15 O16 O17 O18 O19 O20
COM O01
4 7
M3 M2
EMRG
97 98
CHILLED WATER PUMP
FAULT
A1 A1 A1 A1 A1 A1 A1 A1 A1
SV1 M1 M2 M3 MV1 MV2 MV3 FN1A FN1B FN2A FN2B FN3A FN3B SV2
A2 A2 A2 A2 A2 A2 A2 A2 A2
Note:
1. Field modifications or additions must be in compliance with national electrical code as well as all applicable codes and specifications.
2. Refer to certified dimension drawing for exact locations of the main power and control power entrance locations.
CHILLER 60Hz/R134a _ 53
Compact
Compact
RCAW1309BAA, RCAW1509BAA
R
LEGEND
S
T SYMBO DESCRIPTION
N F1~F3 Fuse
380VAC 3P 4W
F3
CF1 C/BOX Heat dissipation fan
3L2 5L3 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 R S T
1L1 1L1 3L2 1L1 3L2 5L3 FG
L CF2 P/BOX Heat dissipation fan
FN1A FN2A FN3A FN4A M1 4 37
M2 VOLTAGE
Air-Cooled Screw
54 _ CHILLER 60Hz/R134a
R Oil heater
40
OLF1A OLF2A OLF3A OLF4A L2 T2 OLC1 CB THC
7A 7A 7A 4.5A 107A Inner temperature controller
(4~ 10) (4~ 10) (4~ 10) (3.5~ 5) L3 T3 (100~ 135)
1 2
202 SV1 Oil separator solenoid valve
F1
Emergency switch
4
L 4
L0 Power indicator lamp
SMPS
2 N 2 SW1 Mold option switch
FN3B
FN1B
FN3A
+V -V
R1
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 HP High pressure switch
26 27
HP
M1
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 5E Reverse phase protector
24VDC- P
24VDC-G
5E
M2
INT69
7A 7A 7A 7A
LP
OLC1
(4~ 10)
REMOTE RUN
CHILLED WATER FLOW
OIL FLOW
110 FN2B 111 OLF3B 112
113 FN4B
26 27 10 11 12 13 14 15 16 17 18 19 27 47 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 27 47
+24V - 24V RTD1 RTD1 RTD2 RTD2 RTD3RTD3 RTD4 RTD4 RTD5 RTD5 24V- G 24V I01 I02 I03 I04 I05 I06 I07 I08 I09 I10 I11 I12 I13 I14 I15 I16 24V- G 24V
- (2) +(1) - (4) +(3) - (6) +(5) - (8) +(7) - (10) +(9) Inp ut (Second ary)
Inp ut (Primary)
HMI
Output (Primary) MAIN CONTROL UNIT Output (Second ary)
UNIT O02 O03 O04 O05 O06 O07 O08 COM O09 O10 O12 O16 O17 O18 O19 O20
COM O01 O11 O13 O14 O15
4 7
M3 M2
EMRG
97 98
CHILLED WATER PUMP
FAULT
A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1
SV1 M1 M2 M3 MV1 MV2 MV3 FN1A FN1B FN2A FN2B FN3A FN3B FN4A FN4B FN5A FN5B SV2
A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2
Note:
1. Field modifications or additions must be in compliance with national electrical code as well as all applicable codes and specifications.
2. Refer to certified dimension drawing for exact locations of the main power and control power entrance locations.
RCAW1709BAA, RCAW1809BAA
R
LEGEND
S
T SYMBO DESCRIPTION
N F1~F3 Fuse
380VAC 3P 4W
F3
CF1 C/BOX Heat dissipation fan
Air-Cooled Screw
3L2 5L3 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 R S T
1L1 1L1 3L2 1L1 3L2 5L3 FG
L CF2 P/BOX Heat dissipation fan
FN1A FN2A FN3A FN4A FN5A M1 4 37
M2 VOLTAGE
220VAC TO MAIN CONTROL
N MONITORING R1
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 M3 2T1 4T2 6T3 2T1 4T2 6T3 UNIT Assist relay
L1 R 2 (5E) 47 N
40 CCH1
OLF1A OLF2A OLF3A OLF4A OLF5A L2 T2 OLC1 CB Oil heater
7A 7A 7A 7A 7A 107A
(4~ 10) (4~ 10) (4~ 10) (4~ 10) (4~ 10) L3 T3 (100~ 135)
THC
1 2 Inner temperature controller
202
F1
SV1 Oil separator solenoid valve
3 3 2
14. Wiring Diagrams
L0
SV2 Mid pressure air charging solenoid valve
M1 F2 CCH1
8 9
MV1 MV2 MV3 Comp capacity control valve(25%,50%,75%)
3
U V START/ STOP SWITCH
X W M1 Comp magnet switch 1
FAN 1A FAN 2A FAN 3A FAN 4A FAN 5A Y COMP
4
Z M2 Comp magnet switch 2 ( connection)
CF1
40 THC M3 Comp magnet switch 3 ( Y connection)
11
TO MAIN CONTROL UNIT 47 1 CF2
12 INTERNAL FN1A~FN5A Fan1A~Fan5 A magnet contactors
2 2
PROTECTOR
2 R1
(INT69) 4 FN1B~FN5B Fan1B~Fan5B magnet contactors
4
4
220VAC
OLF1A~OLF5A Fan1A~Fan5 A over current relays
L N
OLF1B~OLF5B Fan1B~Fan5B over current relays
4
L 4 OLC1 Comp over current relay
SMPS Emergency switch
2 N 2
FN3B
FN1B
FN5B
FN5A
FN3A
+V -V
R1
3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3
L0 Power indicator lamp
1L1
26 27
HP
M1
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3
24VDC- P
24VDC-G
5E
OLC1
(4~ 10)
REMOTE RUN
CHILLED WATER FLOW
OIL FLOW
110 FN2B 111 OLF3B 112
113 FN4B 114 OLF5B 115
26 27 10 11 12 13 14 15 16 17 18 19 27 47 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 27 47
+24V - 24V RTD1 RTD1 RTD2 RTD2 RTD3RTD3 RTD4 RTD4 RTD5 RTD5 24V- G 24V I01 I02 I03 I04 I05 I06 I07 I08 I09 I10 I11 I12 I13 I14 I15 I16 24V- G 24V
- (2) +(1) - (4) +(3) - (6) +(5) - (8) +(7) - (10) +(9) Inp ut (Second ary)
Inp ut (Primary)
HMI
Output (Primary) MAIN CONTROL UNIT Output (Second ary)
UNIT O02 O03 O04 O05 O06 O07 O08 COM O09 O10 O12 O16 O17 O18 O19 O20
COM O01 O11 O13 O14 O15
4 7
M3 M2
EMRG
97 98
CHILLED WATER PUMP
FAULT
A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1
SV1 M1 M2 M3 MV1 MV2 MV3 FN1A FN1B FN2A FN2B FN3A FN3B FN4A FN4B FN5A FN5B SV2
A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2
Note:
1. Field modifications or additions must be in compliance with national electrical code as well as all applicable codes and specifications.
2. Refer to certified dimension drawing for exact locations of the main power and control power entrance locations.
CHILLER 60Hz/R134a _ 55
Compact
Compact
56 _ CHILLER 60Hz/R134a
R
S
LEGEND
T
N SYMBO DESCRIPTION
380VAC 3P 4W
F3
3L2 5L3 5L3 1L1 1L1 3L2 5L3 1L1 3L2 5L3 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 R S T F1~F3 Fuse
1L1 1L1 3L2 1L1 3L2 5L3 1L1 1L1 3L2 5L3 1L1 3L2 5L3 FG
L
FN6A FN7A FN8A M4 FN1A FN2A FN3A M1 4 37
M5 M2 VOLT AGE
220VAC TO MAIN CONTROL CF1 C/BOX Heat dissipation fan
N MONITORING
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 M6 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 M3 2T1 4T2 6T3 2T1 4T2 6T3 UNIT
L1 L1 R 2 (5E) 47 N
48 40
OLF6A OLF7A OLF8A L2 T2 OLC2 OLF1A OLF2A OLF3A L2 T2 OLC1 CB CF2 P/BOX Heat dissipation fan
7A 7A 7A
14. Wiring Diagrams
107A 7A 7A 7A 107A
(4~10) (4~10) (4~10) (4~10)
L3 T3 (100~135) (4~10) (4~10) L3 T3 (100~135)
1 2
202 202 R1
F1
Assist relay
3 3 2
L0
CCH1
Oil heater
M1 F2 CCH1
8 9
THC
M4
3 Inner temperature controller
U V U V START/STOP SWITCH
X W X W
FAN 6A FAN 7A FAN 8A Y COMP FAN 1A FAN 2A FAN 3A Y COMP
4 SV1
Z Z
Oil separator solenoid valve
CF1
48 40 THC SV2
11 11 Mid pressure air charging solenoid valve
TO MAIN CONTROL UNIT 55 1 55 1 CF2
TO MAIN CONTROL UNIT
12 INTERNAL 12 INTERNAL
2 2 2 2
PROTECTOR PROTECTOR MV1 MV2 MV3
2 2 R1 Comp capacity control valve(25%,50%,75%)
(INT69) (INT69) 4
4 4
4 4
220VAC
L N
M1, M4 Comp magnet switch 1
FN1B
FN3A
FN6B
FN8A
+V -V
R1
28 29 FN1A~FN6A Fan1A~Fan6 A magnet contactors
HP
M4
M1
24VDC-P
FN1B~FN6B Fan1B~Fan6B magnet contactors
24VDC-G
M5
5E
M2
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3
INT69
INT69
ANTI-FREEZING
FN2A 105 OLF3A 106
FN1A 102 OLF1B 103
FN7A 120 OLF8A 121
FN6A 117 OLF6B 118
REMOTE RUN
EMERGENCY SWITCH
OIL FLOW
110 FN2B 111 OLF3B 112
125 FN7B 126 OLF8B 127 FN8B
HIGH-LOW DIFFERENTIAL
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3
OLF2B
OLF7A 119
OLF7B
7A 7A 7A 7A 7A 7A
(4~10)
28 29 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 55 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 29 55
(4~10) (4~10) (4~10) (4~10) (4~10)
+24V -24V RTD1 RTD1 RTD2 RTD2 RTD3RTD3 RTD4 RTD4 RTD5 RTD5 RTD6 RTD6 RTD7 RTD7 RTD8RTD8 RTD9 RTD9 24V-G 24V I01 I02 I03 I04 I05 I06 I07 I08 I09 I10 I11 I12 I13 I14 I15 I16 I17 I18 I19 I20 I21 I22 I23 I24 24V-G 24V OLC1~OLC2 Comp over current relays
-(2) +(1) -(4) +(3) -(6) +(5) -(8) +(7) -(10) +(9) -(12) +(11) -(14) +(13) -(16) +(15) -(18) +(17) Input (Secondary)
Input (Primary)
HMI
Output (Primary) MAIN CONTROL UNIT Output (Secondary)
UNIT O02 O03 O04 O05 O06 O07 O08 COM O09 O10 O11 O12 O14 O15 O16 O17 O18 O19 O20 O21 O22
COM O01 O13
Emergency switch
EMRG 7 71 72 73 74 75 76 77 78 7 79 80 81 82 83 80 80 81 82 83 85
4 7
L0 Power indicator lamp
M3 M2
EMRG
FAN 1B FAN 2B FAN 3B FAN 6B FAN 7B FAN 8B 97 98 SW1 Mold option switch
CHILLED WATER PUMP
FAULT
A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1
SV1 M1 M2 M3 MV1 MV2 MV3 FN1A FN1B FN2A FN2B FN3A FN3B FN4A FN4B FN5A FN5B FN6A FN6B FN7A FN7B FN8A FN8B FN9A FN9B FN10A FN10B SV2 HP High pressure switch
A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2
Note:
1. Field modifications or additions must be in compliance with national electrical code as well as all applicable codes and specifications.
2. Refer to certified dimension drawing for exact locations of the main power and control power entrance locations.
RCAW2609BAA, RCAW3009BAA
Air-Cooled Screw
S LEGEND
T
N SYMBO DESCRIPTION
380VAC 3P 4W
F3
14. Wiring Diagrams
3L2 5L3 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 R S T
1L1 1L1 3L2 1L1 3L2 5L3 1L1 1L1 3L2 5L3 1L1 3L2 5L3 FG F1~F3 Fuse
L
FN6A FN7A FN8A FN9A M4 FN1A FN2A FN3A FN4A M1 4 37
M5 M2 VOLTAGE
220VAC TO MAIN CONTROL
N MONITORING CF1 C/BOX Heat dissipation fan
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 M6 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 M3 2T1 4T2 6T3 2T1 4T2 6T3 UNIT
L1 L1 R 2 (5E) 47 N
48 40
OLF6A OLF7A OLF8A OLF9A L2 T2 OLC2 OLF1A OLF2A OLF3A OLF4A L2 T2 OLC1 CB
7A 7A 7A 7A 7A 7A 7A 7A
CF2 P/BOX Heat dissipation fan
(4~10) 107A 107A
(4~10) (4~10) (4~10) (4~10) (4~10) (4~10) (4~10)
L3 T3 (100~135) L3 T3 (100~135) 2
1
202 202
F1 R1 Assist relay
3 3 2
L0 CCH1
M1 F2 CCH1
Oil heater
8 9
M4 THC
3 Inner temperature controller
U V U V START/STOP SWITCH
X W X W
FAN 6A FAN 7A FAN 8A FAN 9A Y COMP FAN 1A FAN 2A FAN 3A FAN 4A Y COMP
4
Z Z
SV1 Oil separator solenoid valve
CF1
48 40 THC
11 11 SV2
TO MAIN CONTROL UNIT 55 1 55 1 CF2
Mid pressure air charging solenoid valve
TO MAIN CONTROL UNIT
12 INTERNAL 12 INTERNAL
2 2 2 2
PROTECTOR PROTECTOR
2 2 R1 MV1 MV2 MV3
(INT69) (INT69) 4 Comp capacity control valve(25%,50%,75%)
4 4
4 4
220VAC
SMPS
2 N 2 M3, M6 Comp magnet switch 3 ( Y connection)
FN1B
FN6B
FN8A
+V -V
R1
M1
24VDC-P
24VDC-G
M5
5E
M2
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3
FN1B~FN8B Fan1B~Fan8B magnet contactors
INT69
INT69
ANTI-FREEZING
FN1A 102 OLF1B 103
FN6A 117 OLF6B 118
FN9B
OLC1
EMERGENCY SWITCH
REMOTE RUN
OIL FLOW
110 FN2B 111 OLF3B 112 FN3B
113 FN4B
125 FN7B 126 OLF8B 127 FN8B
HIGH-LOW DIFFERENTIAL
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3
OLF1B OLF6B
OLF2A 104 FN2A 105 OLF3A 106 FN3A
OLF6A 116
OLF2B
7A 7A 7A 7A 7A 7A 7A 7A
OLF1B~OLF8B Fan1B~Fan8B over current relays
28 29 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 55 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 29 55
(4~10) (4~10) (4~10) (4~10) (4~10) (4~10) (4~10) (4~10)
+24V -24V RTD1 RTD1 RTD2 RTD2 RTD3RTD3 RTD4 RTD4 RTD5 RTD5 RTD6 RTD6 RTD7 RTD7 RTD8RTD8 RTD9 RTD9 24V-G 24V I01 I02 I03 I04 I05 I06 I07 I08 I09 I10 I11 I12 I13 I14 I15 I16 I17 I18 I19 I20 I21 I22 I23 I24 24V-G 24V
-(2) +(1) -(4) +(3) -(6) +(5) -(8) +(7) -(10) +(9) -(12) +(11) -(14) +(13) -(16) +(15) -(18) +(17)
Input (Primary) Input (Secondary)
OLC1~OLC2 Comp over current relays
HMI
Output (Primary) MAIN CONTROL UNIT Output (Secondary)
UNIT O02 O03 O04 O05 O06 O07 O08 COM O09 O10 O11 O12 O14 O15 O16 O17 O18 O19 O20 O21 O22
COM O01 O13
Emergency switch
EMRG 7 71 72 73 74 75 76 77 78 7 79 80 81 82 83 80 80 81 82 83 85
FAULT
A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1
SV1 M1 M2 M3 MV1 MV2 MV3 FN1A FN1B FN2A FN2B FN3A FN3B FN4A FN4B FN5A FN5B FN6A FN6B FN7A FN7B FN8A FN8B FN9A FN9B FN10A FN10B SV2 HP High pressure switch
A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2
2
LP Low pressure switch
Note:
1. Field modifications or additions must be in compliance with national electrical code as well as all applicable codes and specifications.
2. Refer to certified dimension drawing for exact locations of the main power and control power entrance locations.
CHILLER 60Hz/R134a _ 57
Compact
Compact
RCAW3409BAA, RCAW3609BAA
Air-Cooled Screw
58 _ CHILLER 60Hz/R134a
R
S
LEGEND
T
N
SYMBO DESCRIPTION
380VAC 3P 4W
F3
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 R S T F1~F3 Fuse
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 FG
L
FN6A FN7A FN8A FN9A FN10A M4 FN1A FN2A FN3A FN4A FN5A M1 4 37
M5 M2 VOLT AGE
220VAC TO MAIN CONTROL CF1 C/BOX Heat dissipation fan
N MONITORING
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 M6 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 M3 2T1 4T2 6T3 2T1 4T2 6T3 UNIT
L1 L1 R 2 (5E) 47 N
14. Wiring Diagrams
48 40
OLF6A OLF7A OLF8A OLF9A OLF10A L2 T2 OLC2 OLF1A OLF2A OLF3A OLF4A OLF5A L2 T2 OLC1 CB CF2 P/BOX Heat dissipation fan
7A 7A 7A 7A 7A 7A 7A
107A 7A 7A 7A 107A
(4~10) (4~10) (4~10) (4~10) (4~10) (4~10) (4~10)
L3 T3 (100~135) (4~10) (4~10) (4~10) L3 T3 (100~135)
1 2
202 202 R1
F1
Assist relay
3 3 2
L0
CCH1
Oil heater
M1 F2 CCH1
8 9
THC
M4
3 Inner temperature controller
U V U V START/STOP SWITCH
X W X W
FAN 6A FAN 7A FAN 8A FAN 9A FAN 10A Y COMP FAN 1A FAN 2A FAN 3A FAN 4A FAN 5A Y COMP SV1
4 Oil separator solenoid valve
Z Z
CF1
48 40 THC SV2
11 11 Mid pressure air charging solenoid valve
TO MAIN CONTROL UNIT 55 1 55 1 CF2
TO MAIN CONTROL UNIT
12 INTERNAL 12 INTERNAL
2 2 2 2
PROTECTOR PROTECTOR MV1 MV2 MV3
2 2 R1 Comp capacity control valve(25%,50%,75%)
(INT69) (INT69) 4
4 4
4 4
220VAC
L N
M1, M4 Comp magnet switch 1
4
M2, M5 Comp magnet switch 2 ( connection)
4
L
SMPS
2 N 2 M3, M6 Comp magnet switch 3 ( Y connection)
FN1B
FN5B
FN5A
FN6B
FN10A
+V -V
FN10B
M1
24VDC-P
24VDC-G
M5
5E
1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3 1L1 3L2 5L3
INT69
INT69
ANTI-FREEZING
FN1A 102 OLF1B 103
FN9B 129 OLF10B 130
FN1B FN2B FN3B FN4B FN5B FN6B FN7B FN8B FN9B FN10B
LP
OLC2
OLC1
EMERGENCY SWITCH
REMOTE RUN
OIL FLOW
110 FN2B 111 OLF3B 112 FN3B
113 FN4B 114 OLF5B 115
HIGH-LOW DIFFERENTIAL
2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3 2T1 4T2 6T3
OLF1B OLF2B OLF3B OLF4B OLF5B OLF6B OLF7B OLF8B OLF9B OLF10B
OLF1A 101
OLF2A 104 FN2A 105 OLF3A 106 FN3A
OLF6A 116 FN6A 117 OLF6B 118
OLF2B
7A 7A 7A 7A 7A 7A 7A 7A 7A 7A
OLF1B~OLF10B Fan1B~Fan10B over current relays
28 29 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 55 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 29 55
(4~10) (4~10) (4~10) (4~10) (4~10) (4~10)
+24V -24V RTD1 RTD1 RTD2 RTD2 RTD3RTD3 RTD4 RTD4 RTD5 RTD5 RTD6 RTD6 RTD7 RTD7 RTD8RTD8 RTD9 RTD9 24V-G 24V I01 I02 I03 I04 I05 I06 I07 I08 I09 I10 I11 I12 I13 I14 I15 I16 I17 I18 I19 I20 I21 I22 I23 I24 24V-G 24V
-(2) +(1) -(4) +(3) -(6) +(5) -(8) +(7) -(10) +(9) -(12) +(11) -(14) +(13) -(16) +(15) -(18) +(17) Input (Secondary)
OLC1~OLC2 Comp over current relays
Input (Primary)
(4~10) (4~10) (4~10) (4~10) HMI
Output (Primary) MAIN CONTROL UNIT Output (Secondary)
UNIT O02 O03 O04 O05 O06 O07 O08 COM O09 O10 O11 O12 O14 O15 O16 O17 O18 O19 O20 O21 O22
COM O01 O13
Emergency switch
EMRG 7 71 72 73 74 75 76 77 78 7 79 80 81 82 83 80 80 81 82 83 85
FAULT
SW1 Mold option switch
A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1
SV1 M1 M2 M3 MV1 MV2 MV3 FN1A FN1B FN2A FN2B FN3A FN3B FN4A FN4B FN5A FN5B FN6A FN6B FN7A FN7B FN8A FN8B FN9A FN9B FN10A FN10B SV2
Note:
1. Field modifications or additions must be in compliance with national electrical code as well as all applicable codes and specifications.
2. Refer to certified dimension drawing for exact locations of the main power and control power entrance locations.
Air-Cooled Screw
15. Electrical Data
Single point power connection
Unit Voltage Compressor Fan REC
Total
Model Supplied No. LRA RLA No. RLA MCA MOCP Fuse
V-Hz-Phase RLA
Min. Max EA Amp. Amp. EA Amp. Size
RCAW0409BAA 380-60-3 342 418 1 192 65 4 3 77 122 200 150
RCAW0509BAA 380-60-3 342 418 1 270 83 4 3 95 152 250 200
RCAW0609BAA 380-60-3 342 418 1 343 91 6 3 109 173 250 225
RCAW0709BAA 380-60-3 342 418 1 343 110 6 3 128 205 350 250
RCAW0809BAA 380-60-3 342 418 1 407 133 6 3 151 243 400 300
RCAW0909BAA 380-60-3 342 418 1 372 134 6 6 170 269 450 350
RCAW1009BAA 380-60-3 342 418 1 482 157 6 6 193 306 500 400
RCAW1109BAA 380-60-3 342 418 1 520 181 6 6 217 346 500 450
RCAW1209BAA 380-60-3 342 418 1 535 199 6 6 235 375 600 450
RCAW1309BAA 380-60-3 342 418 1 728 204 8 6 255 403 600 500
RCAW1509BAA 380-60-3 342 418 1 823 253 8 6 301 480 800 600
RCAW1709BAA 380-60-3 342 418 1 1067 270 10 6 330 523 800 700
RCAW1809BAA 380-60-3 342 418 1 1247 289 10 6 349 555 800 700
RCAW2009BAA 380-60-3 342 418 2 482 157 12 6 386 558 700 600
RCAW2209BAA 380-60-3 342 418 2 520 181 12 6 435 630 800 700
Compact
RCAW2409BAA 380-60-3 342 418 2 535 199 12 6 471 683 800 800
RCAW2609BAA 380-60-3 342 418 2 728 204 16 6 504 728 1000 800
RCAW3009BAA 380-60-3 342 418 2 823 253 16 6 602 872 1200 1000
RCAW3409BAA 380-60-3 342 418 2 1067 270 20 6 659 953 1200 1200
RCAW3609BAA 380-60-3 342 418 2 1247 289 20 6 698 1012 1400 1200
RCAW3909BAA 380-60-3 342 418 3 728 204 24 6 756 - - -
RCAW4509BAA 380-60-3 342 418 3 823 253 24 6 903 - - -
RCAW5109BAA 380-60-3 342 418 3 1067 270 30 6 989 - - -
RCAW5409BAA 380-60-3 342 418 3 1247 289 30 6 1048 - - -
Symbols:
LRA: Locked Rotor Amps.
RLA: Rated Load Amps.
MCA : Minimum Circuit Amps. (for wire sizing)
MOCP : Maximum Overcurrent Protection
REC Fuse Size: Recommended Fuse Size
Notes:
1. 380V-3Ø-60Hz rating voltage, voltage maximum tolerance ±10%.
2. Electrical source must be 3phase 4wire for security. Neutral line and earth line must be separately connected.
3. Ground wire must be installed.
4. Use cable applicable to current more than MCA.
5. Use ring type terminal cable.
6. Have all electric work done by a licensed electrician according to "Electrical facility engineering standard" and
"Interior wire regulations."
CHILLER 60Hz/R134a _ 59
Air-Cooled Screw
15. Electrical Data
Dual point power connection
Unit Voltage Compressor Fan REC
Total
Model Supplied No. LRA RLA No. RLA MCA MOCP Fuse
V-Hz-Phase RLA
Min. Max EA Amp. Amp. EA Amp. Size
RCAW0409BAA 380-60-3 342 418 1 192 65 4 3 77 - - -
RCAW0509BAA 380-60-3 342 418 1 270 83 4 3 95 - - -
RCAW0609BAA 380-60-3 342 418 1 343 91 6 3 109 - - -
RCAW0709BAA 380-60-3 342 418 1 343 110 6 3 128 - - -
RCAW0809BAA 380-60-3 342 418 1 407 133 6 3 151 - - -
RCAW0909BAA 380-60-3 342 418 1 372 134 6 6 170 - - -
RCAW1009BAA 380-60-3 342 418 1 482 157 6 6 193 - - -
RCAW1109BAA 380-60-3 342 418 1 520 181 6 6 217 - - -
RCAW1209BAA 380-60-3 342 418 1 535 199 6 6 235 - - -
RCAW1309BAA 380-60-3 342 418 1 728 204 8 6 255 - - -
RCAW1509BAA 380-60-3 342 418 1 823 253 8 6 301 - - -
RCAW1709BAA 380-60-3 342 418 1 1067 270 10 6 330 - - -
RCAW1809BAA 380-60-3 342 418 1 1247 289 10 6 349 - - -
RCAW2009BAA 380-60-3 342 418 2 482 157 12 6 386 306 / 306 500 / 500 400 / 400
RCAW2209BAA 380-60-3 342 418 2 520 181 12 6 435 346 / 346 500 / 500 450 / 450
Compact
RCAW2409BAA 380-60-3 342 418 2 535 199 12 6 471 375 / 375 600 / 600 450 / 450
RCAW2609BAA 380-60-3 342 418 2 728 204 16 6 504 403 / 403 600 / 600 500 / 500
RCAW3009BAA 380-60-3 342 418 2 823 253 16 6 602 480 / 480 800 / 800 600 / 600
RCAW3409BAA 380-60-3 342 418 2 1067 270 20 6 659 523 / 523 800 / 800 700 / 700
RCAW3609BAA 380-60-3 342 418 2 1247 289 20 6 698 555 / 555 800 / 800 700 / 700
RCAW3909BAA 380-60-3 342 418 3 728 204 24 6 756 728 / 403 1000 / 600 800 / 500
RCAW4509BAA 380-60-3 342 418 3 823 253 24 6 903 872 / 480 1200 / 800 1000 / 600
RCAW5109BAA 380-60-3 342 418 3 1067 270 30 6 989 953 / 523 1200 / 800 1200 / 700
RCAW5409BAA 380-60-3 342 418 3 1247 289 30 6 1048 1012 / 555 1400 / 800 1200 / 700
Symbols:
LRA: Locked Rotor Amps.
RLA: Rated Load Amps.
MCA : Minimum Circuit Amps. (for wire sizing)
MOCP : Maximum Overcurrent Protection
REC Fuse Size: Recommended Fuse Size
Notes:
1. 380V-3Ø-60Hz rating voltage, voltage maximum tolerance ±10%.
2. Electrical source must be 3phase 4wire for security. Neutral line and earth line must be separately connected.
3. Ground wire must be installed.
4. Use cable applicable to current more than MCA.
5. Use ring type terminal cable.
6. Have all electric work done by a licensed electrician according to "Electrical facility engineering standard"
and "Interior wire regulations."
60 _ CHILLER 60Hz/R134a
Air-Cooled Screw
16. Installation
Installation
Consider the condition of ventilation
• Flooded air cooled chiller should be installed in the ground open air or provided proper ventilation.
• If install the unit alongside the wall, there must be enough ventilation space.
AIR AIR
Wall
LG
>3,000(118.1)
>800(31.5)
[Unit : mm (inch)]
Note :
Compact
When the front or backside of the unit is near to the wall, if the wall is higher than the ground more than
800mm(31.5 inches), the distance between wall and unit should be longer than 3000mm(118.1 inches).
AIR AIR
LG
Wall
>2,000(78.7)
>800(31.5)
[Unit : mm (inch)]
Note :
When the front or backside of the unit is near to the wall, if the wall is higher than the ground less than
800mm(31.5 inches), the distance between wall and unit should be longer than 2000mm(78.7 inches).
AIR AIR
Wall
3 9
0
12
High
-76 MPa 15
>1,600(36) 10
-76
15
LOW
MPa 35
25
30
>800(31.5)
[Unit : mm (inch)]
Note :
When the side is near to the wall, the distance between wall and unit should be longer than
1600mm(63.0 inches).
CHILLER 60Hz/R134a _ 61
Air-Cooled Screw
16. Installation
AIR AIR AIR AIR
LG LG
>3,000(118.1)
[Unit : mm (inch)]
Note :
The distance between units should be longer than 3000mm(118.1).
Compact
BEHIND
>1600(63)
SE RVICE SE RVICE
SIDE CLEARANCE CLEARANCE SIDE
ARE A ARE A
>800(31.5) >1,000(39.4)
>1800(70.9)
62 _ CHILLER 60Hz/R134a
RCAW0409BAA, RCAW0509BAA
Air-Cooled Screw
16. Installation
Note :
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done by customer.
3. Drain should be located at low level around the foundation for proper draining.
CHILLER 60Hz/R134a _ 63
Compact
Compact
64 _ CHILLER 60Hz/R134a
16. Installation
Note :
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done by customer.
3. Drain should be located at low level around the foundation for proper draining.
RCAW0909BAA, RCAW1009BAA, RCAW1109BAA , RCAW1209BAA
Air-Cooled Screw
16. Installation
Note :
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done by customer.
3. Drain should be located at low level around the foundation for proper draining.
CHILLER 60Hz/R134a _ 65
Compact
Compact
RCAW1309BAA, RCAW1509BAA
Air-Cooled Screw
66 _ CHILLER 60Hz/R134a
16. Installation
Note :
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done by
customer.
3. Drain should be located at low level around the foundation for proper draining.
RCAW1709BAA, RCAW1809BAA
Air-Cooled Screw
16. Installation
Note :
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done by
customer.
3. Drain should be located at low level around the foundation for proper drain-
ing.
CHILLER 60Hz/R134a _ 67
Compact
Compact
6 6
3 9 3 9
0 0
12 12
High High
-76 MPa 15 -76 MPa 15
68 _ CHILLER 60Hz/R134a
15 15
10 25 10 25
5 5
30 30
LOW LOW
-76 MPa 35 -76 MPa 35
16. Installation
7470(294.1)
Mounting Holes 12-Ø26mm(1'')
400(15.8) 200(7.9) 1685(66.3) 1685(66.3) 330(13.0) 1685(66.3) 1685(66.3) Anchor Bolts M20(3/4"),12 EA
Neoprene Pad
2140(84.3)
2400(94.5)
Note :
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
FOUNDATION Recommendation :
130(5.1)
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done by
customer.
3. Drain should be located at low level around the foundation for proper drain-
ing.
RCAW2609BAA, RCAW3009BAA
6 6
3 9 3 9
0 0
12 12
High High
-76 MPa 15 -76 MPa 15
15 15
10 25 10 25
5 5
30 30
LOW LOW
-76 MPa 35 -76 MPa 35
Air-Cooled Screw
16. Installation
9670(380.7)
Mounting Holes 12-Ø26mm(1'')
400(15.8) 200(7.9) 2235(88.0) 2235(88.0) 330(13.0) 2235(88.0) 2235(88.0) Anchor Bolts M20(3/4"),12 EA Neoprene Pad
2400(94.5)
2140(84.3)
Anchor Bolt Installation
Note :
FOUNDATION 1. Ensure that foundation has to be of adequate strength.
130(5.1)
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done by cus-
tomer.
3. Drain should be located at low level around the foundation for proper draining.
CHILLER 60Hz/R134a _ 69
Compact
Compact
RCAW3409BAA, RCAW3609BAA
6 6
3 9 3 9
0 0
12 12
High High
-76 MPa 15 -76 MPa 15
15 15
10 25 10 25
5 5
30 30
LOW LOW
-76 MPa 35 -76 MPa 35
Air-Cooled Screw
70 _ CHILLER 60Hz/R134a
16. Installation
12070(475.2)
Mounting Holes 12-Ø26mm(1'')
400(15.8) 200(7.9) 2835(111.6) 2835(111.6) 330(13.0) 2835(111.6) 2835(111.6) Anchor Bolts M20(3/4"),12 EA
Neoprene Pad
2400(94.5)
2140(84.3)
Anchor Bolt Installation
130(5.1)
Note :
FOUNDATION
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done by customer.
3. Drain should be located at low level around the foundation for proper draining.
RCAW3909BAA, RCAW4509BAA
Air-Cooled Screw
16. Installation
6 6 6
3 9 3 9 3 9
0 0 0
12 12 12
15 15 15
10 25 10 25 10 25
5 5 5
30 30 30
14470(569.7)
2235(88.0) 2235(88.0) 330(13.0) 2235(88.0) 2235(88.0) 330(13.0) 2235(88.0) 2235(88.0) Mounting Holes18-Ø26mm(1'')
400(15.8) 200(7.9)
Anchor Bolts M20(3/4"), 18 EA
Neoprene Pad
2400(94.5)
2140(84.3)
Anchor Bolt Installation
Note :
130(5.1)
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
FOUNDATION 3. Spring isolator can be used (option)
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
2. If foundation height is changed, structual calculation to be necessarily done by customer.
3. Drain should be located at low level around the foundation for proper draining.
CHILLER 60Hz/R134a _ 71
Compact
Compact
RCAW5109BAA, RCAW5409BAA
Air-Cooled Screw
72 _ CHILLER 60Hz/R134a
16. Installation
6 6 6
3 9 3 9 3 9
0 0 0
12 12 12
15 15 15
10 25 10 25 10 25
5 5 5
30 30 30
18070(711.4)
Mounting Holes
18-Ø26mm(1'')
400(15.8) 200(7.9) 2835(116.1) 2835(116.1) 330(13.0) 2835(116.1) 2835(116.1) 330(13.0) 2835(116.1) 2835(116.1)
Anchor Bolts
M20(3/4"), 18 EA
2400(94.5)
2140(84.3)
Note :
130(5.1)
FOUNDATION
1. Ensure that foundation has to be of adequate strength.
2. The slope deviation of foundation plane should not be more than 0.1%.
3. Spring isolator can be used (option)
Neoprene Pad
4. Dimensions are in mm(inch).
Recommendation :
1. LG recommends more than 400 mm concrete foundation height.
But according to installation field condition, it might be changable,
Anchor Bolt Installation 2. If foundation height is changed, structual calculation to be necessarily done by cus-
tomer.
3. Drain should be located at low level around the foundation for proper draining.
Air-Cooled Screw
17. Guide Specifications
1. General
• LG RCAW series are microprocessor controlled, twin-screw compressor, air-cooled, liquid chillers.
• Each RCAW series chiller is factory-assembled including compressor, motor, evaporator, condenser,
and control box.
• The initial charge of refrigerant HFC-134a and oil will be supplied for all units.
• Chillers shall be rated in accordance with ARI Standard 550/590.
• Chillers shall be evacuated and fully charged with refrigerant and oil, and shall be factory opera-
tional run tested.
2. Equipment
2.01 Application Range
• This specification is applied to all the models of air cooled screw chillers RCAW which is made and
sold by LG Electronics Co.
Compact
2.02 General Structure
• Chiller is all in one and is made with convenient structure for installation, operation and mainte-
nance management and also compact to minimize the installation area.
2.04 Evaporator
• Evaporator is (Flooded) Shell & Tube type and made with carbon steel. Also it has Tube changeable structure.
• To increase the efficiency of evaporator, it has the structure to spray refrigerant liquid on heat exchanger tube
surface.
• It has the structure which is easy to be disassembled, because water box cover is attached and fixed with bolt
& nut for maintenance and washing of inner tube.
• Safety valve which spouts refrigerant of evaporator is installed to protect chiller in case when temperature
increases too much because of fire.
• Tube is phosphorus deoxidization bronze pipe which has over 99.9% purity and no joint, outside of it is
attached to special shape Fin, inside of it has inner grooved tube or equivalent product.
CHILLER 60Hz/R134a _ 73
Air-Cooled Screw
17. Guide Specifications
• Anti-freezing switch is installed at chilled water outlet to prevent it from being frozen and burst by chilled
water flow stopping, chilled water temperature decreasing, and drain plug, air bent plug are at body.
• Evaporator is covered with thermal insulation materials for dew condensation prevention and thermal insula-
tion.
• Design pressure for shell is 300psig(2.1MPa).
• Design working pressure for tube line is 150psig(1.0MPa) or 300psig(optional).
• The evaporator and economizer are insulated with 3/4inch(19mm) insulation(K=0.26).
2.05 Condenser
• Tubes in condenser are made with phosphorus deoxidization bronze pipe which has no joint part
and purity over 99.9%, and made in structure with Al fin to increase heat transfer area. (Cross fin &
tube type)
• Inner pressure test of refrigerant working side is done at 1.5 times of 2.5MPa which is designed
pressure; it should not have any leakage or change.
• Condenser coil which has been passed the inner pressure test are vacuumed to remove all moisture.
Compact
• Propeller type is used for fan, it has proper air volume. Also it has proper strength for circulating air
and is operated stably through balance test.
• Fan motor is applied by insulation class F.
• Condenser fans are direct-driven.
74 _ CHILLER 60Hz/R134a
Air-Cooled Screw
17. Guide Specifications
• Temperature check – Sensing overheat of compressor discharge temperature, sensing overheat of
compressor motor wire, and anti-freezing switch.
• Chilled water flow – Chilled water flow switch.
• Voltage and current – Voltage monitoring system, compressor over-current breaker (Compressor
OCR) and fan motor over-current breaker (fan motor OCR).
Compact
• Component parts for auto control are installed in the control panel and power panel, Controller and
power supply device are in the control panel and fan, electric contactor for controlling compressor
and 3 phase power related device are in the power panel.
• Indicator which indicates supply of control power, stop switch for emergency and the control pow-
er’s ON/OFF switch shall be installed in the control panel.
• The PLC (Programmable Logic Controller) is applied to control the chiller enhances the chiller per-
formance and through HMI (Human Machine Interface) that has 4-line LCD in full dot way and 9
soft buttons function, it aids user interface and the function of it contains these below.
- Chiller ON/OFF
- Detect the sensor of chiller and indicate operation information
- Indicate malfunction occurrence and history
- Input and indicate the set temperature and user setting value
- Input and indicate control setting and service setting value
• Temperature sensor information of Chiller is provided through HMI, which contains the following:
- Chilled water inlet temperature
- Chilled water outlet temperature
- Compressor outlet refrigerant temperature
- Condenser outlet refrigerant temperature
- Ambient temperature
• HMI indicates setting of controller and control condition through several LED for operation conve-
nience, and the information of control condition contains these below.
- Schedule operation/Manual operation selection
- Delay-time
- Compressor re-circulating operation
- MODBUS control application setting
- Pre-heating control application setting
- Pre-heating control delay
CHILLER 60Hz/R134a _ 75
Air-Cooled Screw
17. Guide Specifications
• PLC provides MODBUS RTU communication function; especially Lon Works or BACnet can be
applied to the system on the request of customer by installing exterior type translator.
• Power panel contains electric contactor for compressor and over load relay. Electric contactor for
compressor is made to minimize the running current of compressor through Y-Δ start.
• Power panel contains electric contactor and over-load relay for each condenser fan.
• Power panel contains power monitoring device to detect power supply condition, and power
monitoring device has over 5 detecting function including reverse voltage, over voltage, low volt-
age, open-phase, and no voltage.
• Auto control system of chiller contains the following functions:
- It performs fan and compressor ON/OFF function and several solenoid valve controlling.
- It provides interlock point of contact for controlling chilled water pump.
- It controls refrigerant volume through the condition of compressor operation and slide valve of
compressor for achieving chilled water outlet setting temperature.
- When chilled water outlet temperature and condenser outlet refrigerant temperature is high,
limit the compressor operation to prevent malfunction.
Compact
- Keep proper pressure of condenser through fan control by condenser outlet temperature.
3. Other
• Chiller is made after getting approval on everything about production from ordering company.
About thing that is not in this specification, discuss it with ordering company and get approval.
76 _ CHILLER 60Hz/R134a
Air-Cooled Screw
Appendix
Unit Conversion
Cooling Capacity
RT Btu/h kcal/h W
1 12,000 3024.2 3516.8
Volume
Length
Compact
m cm mm inch
1 100 1,000 39.37
Power
HP W kW
1 746 0.746
Pressure
Temperature
5
C = — (F - 32)
9
Where,
C is Temperature in °C
F is Temperature in °F
CHILLER 60Hz/R134a _ 77
Compact
78 _ CHILLER 60Hz/R134a
Compact
CHILLER 60Hz/R134a _ 79
Compact
80 _ CHILLER 60Hz/R134a
P/No.: MFL61764711
Air Conditioner
20 Yeouido-dong, Yeongdeungpo-gu,
Yeouido P.O.Box 335 Seoul,
150-721, Korea.
http://www.lgeaircon.com