Escolar Documentos
Profissional Documentos
Cultura Documentos
PART- A (2 Marks)
S.
Questions BT CO’s Year
No.
May/ June 2010,
1. Define Coplanar & concurrent forces. R 1
Nov/ Dec 2010,
Nov/ Dec 2010,
What is the different between a resultant force and equilibrant
2. R 1 May/ June 2012,
force?
Jan 2016
State the necessary and sufficient conditions for static equilibrium May/ June 2012
3. R 1
of a particle in two dimensions. Nov/ Dec 2011
4. What is unit vector? R 1 May/ June 2009
May/ June 2009
5. Distinguish between scalar and vector quantities. R 1
Nov/ Dec 2010
Nov/ Dec 2010
6. State Lame’s theorem. R 1
May/ June 2012
A force acts through the origin. What is the magnitude of the May/ June 2009
7. R 1
force and the angle it makes with X, Y and Z axis? Nov/ Dec 2009
8. State Varignon’s Theorem? R 1 May/ June 2011
Find the magnitude of the resultant of the two concurrent forces
9. of magnitude 60 kN and 40 kN with an included angle of 70 ◦ E 1 May/ June 2011
between them.
A force of magnitude 500N is passing through the origin and a
10. U 1 Nov/ Dec 2011
point A (0.2, 1, 0) m. write the couple form of the force.
May/ June 2009
11. State the principal of transmissibility of forces with simple sketch. R 1
Nov/ Dec 2011
May/ June 2009
12. State the parallelogram law of forces R 1
Nov/ Dec 2012,
Two forces 30N and 40N act at a point ‘O’ .The included angle
13. between them is 60. Find the magnitude and the direction of the R 1 May/ Jun 2016
resultant.
What are the minimum requirements for equilibrium of a particle
14. R 1 May/Jun 2016
in space?
Jan 2016,
15. State the triangular law of forces. R 1
May/June 2007
Find the length of the line joining the origin with the point (2, 1, - Jan 2016,
16. R 1
2). May/June 2014
A Vector F starts at point (2, -1, 2) and passes through the point (-
17. R 1 April / May 2015
1, 3, 5). Find its unit vector.
May/June 2013,
24. Find the unit vector of a force F = 4i – 5j + 8k U 1
April/May 2008.
28. Distinguish between concurrent and coplanar force system. R 1 Nov/Dec 2011.
30. Define vector .What are the characteristics of vectors? R 1 Nov/Dec 2010
Determine the angle between two equal forces F, when their
31. R 1 May/ June 2010.
resultant is R = F / 2
32. Define free body diagram. R 1 April/May 2009
Find the displacement vector when a point moves from position
33. E 1 Nov/Dec 2009
(6, 3, 7) to position (10, -3, 4).
A 100N force acts at the origin in a direction defined by the angles
34. θx= 75◦ and θy = 45◦.Determine θz and the component of the force E 1 Nov/Dec 2006
in the z direction?
A Force of magnitude 750N is direction along AB where A is (0.8 ,
May/June 2006,
35. 0, 1.2) m and B is (1.4, 1.2, 0)m. Write the vector form of the E 1
Nov/Dec 2003.
force.
A force F = (8.25 i + 12.75 j – 18 k) N acts through the origin. What
36. is the magnitude of this force and the angles it makes with x, y, E 1 May/June 2005.
and z axes?
May/June 2005,
37. Mention the different types of forces with example. R 1
Jan 2003.
Two forces of Magnitude 20N and 40N are acting on a
particle.Such that the angle between the two is 135 ◦. If both these
38. E 1 Nov/Dec 2004
forces are acting away from the particle , calculate their resultant
and find its direction.
A force of 500N forms angles 60◦, 45◦ and 120◦ resectively with x,
42. E 1 Nov/Dec 2003.
y axes. Write the force in Vector form.
S.
Questions BT CO’s Year
No.
Two forces P and Q of magnitude 40 N and 60 N respectively act
1. on a bolt A. Determine their resultant if P and Q make 20 and 45 E 1 May/June 2016
respectively with horizontal.
Two forces are applied to a hook support as shown in Fig., below.
Knowing that the magnitude of P is 35 N determine (1) the
required angle α if the resultant R of the two forces applied to the
support is to be horizontal, (2) the corresponding magnitude of R.
Jan 2016,
6. U 1
May/June 2007
7. E 1 Nov/Dec 2015
8. U 1 Nov/Dec 2015
The resultant of the two forces, when they act an angle of 60◦ is
17. 14 N. If the some forces are acting at right angles, their resultant is E 1 May/June 2014
√136 N. Determine the magnitude of the two forces.
A force acts at the origin of a co-ordinate system in a direction
defined by the angles θx = 69.3 and θy = 57.9. Knowing that the y
component of the force is -174 N, Determine
i) the angle θy
18. ii) The other components and the magnitude of the force. U 1 May/June 2014
iii) projection of this force on XZ plane and its magnitude
and
iv) Moment of this force about a point of co-ordinate (2, 3,
4) and its magnitude.
In the Fig., below shown, three wires are joined at D. Two ends A
and B are on the wall and the other end C is on the ground. The
26. wire CD is vertical. A force of 60 kN is applied at ‘D’ and it passes U 1 May/June 2012
through a point E on the ground as shown in Fig., below. Find the
forces in all the three wires.
27. State and prove Lami’s theorem. R 1 Nov/Dec 2011
R 1 Nov/Dec 2011
28.
The five forces shown in Fig., below act at point A. What is the
magnitude of the resultant forces?
U 1 Nov/Dec 2010
30.
R 1
32.
The resultant of force system shown in Fig., below. It’s 520 N along
the negative direction of y axis. Determine P and θ.
U 1 May/June 2010
34
54 E 1 AU Nov 2002
A force F acts as the origin of a coordinate system in a direction
defined by the angles θx = 69.3◦ and θz = 57.9◦ . If the component
of the force F along y direction is -174N, determine.
55. E 1 Nov 2001
1. The angle θy
2. The other components of the force F.
3. The magnitude of the force F.
PART A – 2 MARKS
S.
Questions BT CO’s Year
No.
May/ June 2010,
1. Explain free body diagram. R 1
Nov/Dec 2010
May/June 2008,
2. State Varignon’s theorem R 1
Nov/Dec 2009, 13
List out the steps to be followed to draw the Free Body Diagram of
3. R 1 Dec’11, Jun’12
a rigid body.
State the necessary and sufficient conditions for equilibrium of
4. R 1 Jun’09, Dec’11
rigid bodies in two dimensions
Write the conditions of equilibrium of a system of parallel forces
5. R 1 Dec’10, Jun’12
acting in a plane.
6. State the general condition of equilibrium of particle R 1 May’11
9. E 1 Jan 2016
Nov/Dec2015,
10. State the different types of supports. U 1
April/May 2015,
Find the magnitude and location of the single equivalent force for
a beam AB of length 8 m having a point C at 3 m from A subjected
to the following forces.
11. U 1 April/May 2015.
a) An upward force of 10 N at A.
b) A downward force of 10 N at C.
c) An upward force of 40 N at B.
Nov/Dec 2014,
12. Define Couple. R 1
April/May 2008,
Find the magnitude and location of the single equivalent force of
13. R 1 May/June 2014
the system shown in Fig., below.
Define the term “support reaction”. What are the different
14. R 1 May/June 2014
types of support?
Nov/Dec 2013,
15. What is meant by force-couple system? R 1
May/June 2013,
Write the equation of equilibrium of a rigid body in two May/June2013,
16. R 1
dimensions. April/May 2008,
17. Differentiate particle and rigid body. R 1 Nov/Dec 2012.
18. What is meant by free body diagram of a rigid body? R 1 May/June 2012.
19. What are different types of supports and their reactions? R 1 Nov/ Dec 2011.
State the conditions of equilibrium of rigid bodies in three
20. R 1 Nov/Dec 2010.
dimensions.
A force of magnitude 100 N is passes from A [1, 3, 4] to B [5, 3, 8]
21. m. Calculate its moment about an axis passing from origin to C [3, R 1 May/June 2010.
3, 3].
22. What is single equivalent force? E 1 May/June 2010.
Nov/Dec 2010,
23. How will you resolve a given force into a force and a couple? R 1
May/June 2008.
How will you find moment of a force about a given axis in three
24. U 1 April/May 2008.
dimensions?
25. What is the general condition of equilibrium of a rigid body? R 1 May/June 2007.
S.
Questions BT CO’s Year
No
A bracket is subjected to a force as shown in Fig., below.
Determine (i) an equivalent force couple system at A and B (ii) an
1. E 2 May/June 2016.
equivalent system consisting of 90 kN force at B and another force
at A.
A fixed crane has a mass of 1000 kg and is used to lift a 2400 kg
crate as shown in Fig., below. It is held in place by a pin at A and a
rocker at B. The center of gravity of the crane is located at G.
Determine the reactions at supports A and B.
2. U 2 May/June 2016.
3. E 2 Jan 2016.
Nov/Dec 2015,
4. U 2
Nov/Dec 2003.
6. U 2 May/June 2014.
8. U 2 May/June 2014
9. E 2 Nov/Dec 2013
11. A body is acted upon by a system of forces and a couple as shown E 2 May/June 2013
in Fig., below. Determine the resultant of the system of forces.
Also locate the points of intersection of the system of forces. Also
locate the points of intersection of the resultant with the arm PQ,
QR and RS.
May/June 2012,
16. U 2 May/June 2006,
May/June 2005.
18. What are the different types of loads? Explain with Examples. U 2 Nov/Dec 2011
Nov/Dec 2010,
21. U 2
Nov/Dec 2003.
A system of parallel forces is acting on a rigid bar as shown in Fig.,
below. Reduce the system to
(i) A single force.
(ii) A single force and couple at A
(iii) A single force and couple at B
22. U 2 May/June 2010
Nov/Dec 2010,
23. E 2
April/May 2004.
28. R 2
A uniform bar AB shown in the Fig., below has a mass 50kg and
supports a mass of 200 kg at A. A supporting cable is tied to the
bar at C and the other end is fixed to the vertical wall at D.
Calculate the tension in the supporting cable and the magnitude of
the reaction force at the pin B.
The three forces and a couple shown in Fig., below are applied to
an angle bracket. Find 1) the resultant of this system of forces 2)
44. E 2 Nov 2002
locate the points where the line of acting of the resultant
intersects.
A load P of 3500N is acting on the boom, which is held by a cable
BC as shown in Fig., below. The weight of the boom can be
neglected. a) Draw the free body diagram of the boom. B) Find out
the tension in cable BC. C) Determine the reaction at A.
PART- A (2 Marks)
S.
Questions BT CO’s Year
No
May/ June 2010,
1. Distinguish between centroid and centre of gravity. R 3
Nov/ Dec 2010,
Dec 2009, Dec
2. R 3
State parallel axis theorem with simple sketch. 2010, Jun 2012,
Jun 2009, Dec
3. Define radius of gyration with respect to x-axis of an area. R 3
2010, Jun 2012
4. Define polar moment of inertia of lamina. R 3 Dec 2011
Write the SI units of the mass moment on inertia and of the area
5. R 3 Jun 2010
moment of inertia of a lamina.
May 2011,
6. Define first moment of an area about an axis. R 3
May/June 2014,
May 2011, Dec
7. Define principal axes and principal moment of inertia. R 3
2012,
Jun 2009,
9. State principal axes of inertia? R 3
May/June 2008
May/June 2016,
11. State Pappus and Guldinus theorem R 3
Nov/Dec 2015,
A right angle triangle of base 3m and height 4m is revolved about
12. R 3 Jan 2016
its 4m vertical edge. Compute the volume of the solid generated.
13. Write an expression for the radius of gyration of an area. R 3 Jan 2016.
Write the expression for centroid of hemisphere and circular
14. R 3 Nov/Dec 2015
lumina.
State the theorem of perpendicular axis, as applied to moment of April/May 2015,
15. R 3
inertia. Nov/Dec 2012,
Find the radius of gyration of a rectangular area of M1 about its April/May 2015,
16. R 3
base 9 x 10 cm and area cross-sectional area 300 cm May/June 2013.
What is the radius of gyration of a circle of diameter of about its May/June 2014,
17. R 3
diameter? April/May 2008.
May/June 2014,
18. Define centre of gravity and centroid. R 3
Nov/Dec 2013,
May/June 2013,
20. When will the centroid and centre of mass coincides? R 3
Nov/Dec 2011,
21. What do you mean by the term “radius of gyration”? R 3 Nov/Dec 2012,
May/June 2012,
22. Locate the centroid of a quarter circular area about xx and yy axis. R 3 Nov/Dec 2010.
27. State parallel axis theorem as applied to mass moments of inertia. R 3 April/May 2008
34. Determine the second moment of area of a triangle about its base. R 3 Nov/Dec 2002.
Determine the polar radius of gyration of an annular area with
35. R 3 Nov 2002
outer radius 0.8 m and inner radius 0.5 m
Using the theorem of Pappus, determine the volume of a right
36. R 3 Nov 2002
circular cone, with radius of base ‘r’ and height ‘h’
S.
Questions BT CO’s Year
No
Locate the centroid for area shown in Fig., below.
May/June
1. E 3
2016.
Determine the moment of inertia for the area shown in Fig., below May/June
2. U 3
about the centroidal x and y axis. 2016
A cone of base diameter 200 mm is fitted to a hemisphere of
diameter 200 mm centrally, What should be the height of cone so
3. E 3 Jan 2016
that the centroid of the solid combination lies at the junction
between the cone and hemisphere?
4. U 3 Jan 2016
For the plane area shown in Fig., below locate the centroid of the
area.
5. E 3 Nov/Dec 2015
6. U 3 Nov/Dec 2015
For the plane area shown below, determine the area moment of
inertia and radius of gyration about the X-axis.
May/June
11. E 3 2014, Nov/Dec
2010
For the section in Fig., below the moments of inertia with respect
to the x and y axes have been computed and are known to be Ix =
10.38 mm4, Iy = 6.97 mm4 . Determine
i) The orientation of the principle axes of the section
about O
ii) The values of the principle moments of inertia of the
section about O.
12. U 3 Nov/Dec 2014
Locate the centroid of the area shown in Fig., below .The May/June
13. E 3
dimensions are in mm. 2014
Find the moment of inertia of the built up section shown in Fig.,
below about the axis passing through the centre of gravity parallel
to the top flange plate. All dimensions are in mm.
May/June
14. U 3
2014
May/June
17. E 3
2013
18. A rectangular R.C.C column is centrally cast over a concrete bed U 3 May/June
R.C.C in fig., below column is of section 30 x 45 cm and height 4 m.
the concrete bed is of size 3 x 4.5 m and thickness 30 cm. Find the 2013
mass moment of inertia of the column and bed combination about
its vertical centroidal axis. Mass density of concrete = 2500 kg / m3
May/June
Derive from first principles, the second moment of area of a circle
22. U 3 2012, Nov/Dec
about its diametral axis.
2010
For the section shown in Fig., below, locate the horizontal and
vertical centroidal axis. Dimensions are in mm.
May/June
24. U 3
2012
26. Find the centroid of the area shown in Fig., below U 3 Nov/Dec 2011
Determine the moment of inertia of a rectangle of width b and
27. depth d about (a) its base and (b) an axis passing through the R 3 Nov/Dec 2011
centre of gravity of the rectangle and parallel to the base.
May/June
29. U 3
2010
May/June
30. U 3
2010
Prove that the mass moment of inertia of a right circular cone of May/June
31. R 3
base radius R, height H and mass M about its axis is 3/10 MR2 2010
Determine the moment of inertia of the shaded area shown in Fig., May/June
32. R 3
below. 2010
Find the mass moment of inertia of the rectangular block shown
below about the vertical y axis. A cuboid of 20 x 20 x20 mm has
been remoed from the rectangular block as shown in Fig., below.
The mass density of the material of the block is 7850 Kg/m3
April/May
33. R 3
2008
May/June
35. R 3
2008
Find the second moment of area of the plane lamina shown in Fig.,
below with respect to the given XX-axis
May/June
41. Derive an equation for the mass moment of inertia of cone. E 3
2006
April/May
43. E 3
2003
April/may
44. E 3
2003
Determine the product of inertia of the sectioned area about the X
– Y axes shown in Fig ., below.
PART- A (2 Marks)
S.
Questions BT CO’s Year
No
May/ June
1. Explain the difference between kinematics and kinetics. R 4 2010,
Nov/ Dec 2010,
Dec 2011,
2. State the principle of work and energy. R 4 May/June
2014,
April 2011,
3. R 4
What is D’ Alembert’s principle? Dec 2012
May/June
4. What do you mean by impact of elastic bodies? R 4
2016, Jun 2009
5. State Newton’s law concerning equilibrium of particle. R 4 Jun 2009
A body moves along a straight line so that its displacement from a
Jun’10,
6. fixed point on the line is given by s = 3t2+2t. Find the velocity and U 4
Jun/May12
acceleration at the end of 3 seconds.
A point P moves along a straight line according to the equation x = Apr’11,Dec 10,
7. 4t3-2t-5, where x is in meters. t is in seconds. Determine the U 4 May/June 2005
velocity and acceleration when t = 3sec
A train running at 80 km/h is brought to a standing halt after 50
Dec 2009, Jan
8. seconds. Find the retardation and the distance traveled by the U 4
2016
train before it comes to a halt.
A particle of mass 10kg falls vertically from a height of 100m from Jun’10,
9. ground. What is the change in potential energy when it has U 4 Jun/May 12
reached a height of 50m?
A stone is dropped from the top of a tower. It strikes the ground Dec’11,
10. U 4
after four seconds. Find the height of the tower. May/June 2014
Nov/Dec 2010,
26. Distinguish between rectilinear and curvilinear motion. U 5 April/May
2008
Equation of motion of a body; S= 7t 3 + 3t2 + t + 9. Find the
27. U 5 Nov/Dec 2010
acceleration when t = 3 seconds.
28. What is line of impact? R 5 Nov/Dec 2010
29. Write the equation for tangential and normal accelerations. R 5 Nov/Dec 2010
1. U 5 May/June 2016
The two blocks of mass 20Kg and 40kg are connected by a rope
passing over a friction less pulley as shown in Fig., below.
Assuming coefficient of friction as 0.3 for all contact surfaces. Find
the tension in the string, acceleration of the system. Also compute
the velocity of the system after 4 seconds starting from the rest.
7. U 5 Nov/Dec 2015
A boy drops a stone from the top of well vertically downwards into
10. it. The splash is heard by him after 6 seconds. Find the well depth E 5 April/May 2015
taking sound velocity as 400 m/s.
A car of mass 500 kg moving at a speed of 80 km/hr right collides
with a lorry of mass 1500 kg which is at rest. After the impact, the
11. U 5 April/May 2015
lorry moves at a speed of 36 km/hr to the right. Find the velocity
of the car after impact. Also find the coefficient of restitution.
The two blocks in Fig., below start from rest. The horizontal plane
and the pulley are frictionless and the pulley is assumed to be of
negligible mass. Determine the acceleration of each block and the
tension in each cord.
13. U 5 Nov/Dec 2014
Water drips from a tap fitted to a barrel at the rate of four drops
per seconds as shown in Fig., below. Find the vertical separation
between two consecutive drops after the lower drops has attained
a velocity of 3 m/s.
A stone dropped into well is heard to strike the water after 4 sec. Nov/Dec 2012,
20. U 5
Find the depth of the well if the velocity of the sound is 350 m/sec. Nov 2002
Nov/Dec 2012,
21. Explain the term “Conservation of Energy” R 5
May/June 2008
22. A car is moving with a velocity of 20 m/sec. The car is brought to E 5 Nov/Dec 2012
rest by applying brakes in 4 sec. determine (1) the retardation and
(2) distance travelled by the car after applying brakes.
What is the smallest radius which should be used for a high way
23. curve if the normal component of the accelerations of a car U 5 Nov/Dec 2012
travelling at 72 kmph is not to exceed 0.72 m/sec2?
24. What are the various types of impacts? Discuss any one of them. U 5 Nov/Dec 2012
Three spherical balls of weight 20N, 60N and 120N are moving in
28. the same direction with velocities 12 m/s, 1 m/s and 2 m/s U 5 Nov/Dec 2010
respectively. If the half of the weight 20 N impinges with the ball
of 120 N, Prove that the balls of weights 20 N and 60 N will be
brought to rest after the impact. Assume the balls to be perfectly
smooth.
Two rough planes inclined at 30◦ and 60◦ to the horizontal and the
same height are placed back to back. Masses of 12 kg and 24 kg
36. are placed on the faces and are connected by a string passing over U 5 Nov/Dec 2009
the pulley on the top of planes as shown in Fig., below. If µ = 0.6
find the acceleration.
A car has weight of 15 kN and is travelling horizontally at 20 m/s.
Determine the time needed to stop the car if the coefficient of May/June
37. U 5
friction between the types and the pavement is 0.6.Use principle 2008
of impulse and momentum.
Two men of mass 60 kg and 90 kg dive off from the end of a boat
of mass 400 kg so that their relative velocity with respect to the
boat is 8 m/s. If their boat is initially at rest determine its final
47. velocity for the following conditions: U 5 May/June 2005
(i) If two men dive simultaneously.
(ii) The 60 kg man dives first followed by 90 kg man.
(iii) The 90 kg man dives first followed by 60 kg man.
Two vehicles approach each other in opposite lanes of a straight
horizontal roadway as shown in Fig., below. Find the time and
positions at which the vehicles meet if both continue to move with
constant speed.
48. E 5 April 2005
Two rough planes inclined at 30◦ and 60◦ to horizontal are placed
back to back as shown in Fig., below. Two blocks of weight 50 N
and 100 N are placed on the planes and are connected by a cord
passing over a frictionless pulley. If the coefficient of friction
between the planes and blocks is 0.33, find the resulting
acceleration of the blocks and the tension in the cord.
51. U 5 April/May 2003
Two bodies weighting 300 N and 450 N are hung to the ends of a
rope passing over an ideal pulley. With what acceleration the
heavier body comes down? What is the tension in the string?
A 20kg mass slides down a 25◦ inclined plane from rest as shown in
Fig., below. It hits a spring of constant 1800 N/m. If the coefficient
of kinetic friction is 0.2, determine the maximum compression in
the spring.
61. E 5 June 2001
PART- A (2 Marks)
S.
Questions BT CO’s Year
No
May/ June 2010,
1. State the laws of dry friction. R 6
Nov/ Dec 2010
2. Define coefficient of kinetic friction. R 6 Jun’09, Dec 12
3. What is coulomb friction? R 6 Jun’09
Dec’10,
4. Define: coefficient of static friction. R 6
Apr’11,May/
List out the different types of friction. What is coefficient of static
5. R 6 Dec’09
friction?
6. When do we say that the motion of a body is impending? R 6 Dec’11, Dec’12,
Nov/Dec’13,May/J
7. What is general plane motion? R 4
une ’13,
A rigid body is acted upon by a force of 100 N, the velocity of body
changes from 15 m/s to 25 m/s during a period of 50 s. Find the
8. U 4 Dec’09
mass of body and the distance moved by the body during the time
of interval.
A rigid body rotates about a fixed axis. Write the expression for
9. U 4 Dec’11
angular velocity when the rotation is uniformly accelerated.
How so, at any given instant, the velocity and acceleration of
10. different points of a rigid body vary when it is undergoing U 4 Jun/May 2012
translation?
May/June’16,
11. What is angle of repose? R 5
April/May’15
A motor bike wheel of radius 80 cm is moving along a straight road
12. U 6 May/June’16
with a speed of 60 km/hr. Find the angular speed of the wheel.
State the principal of work and energy for the general plane
13. R 5 Jan’16
motion of rigid bodies.
What is the frictional force generated when a body of mass 10 kg
14. resting on a horizontal plane subjected to a horizontal force p in U 6 Nov/Dec’15
earth gravitational field, if the coefficient of friction is .25.
A body of weight 150 N rest on a horizontal plane. If a horizontal
15. force of 50N can just move it, then what will be the value of E 6 Nov/Dec’15
coefficient of friction?
Nov/Dec’15,
16. What is instantaneous centre of rotation in plane motion? R 5
Nov/Dec’14
A wheel of radius 50cm subjected to a load of 300N rolls on a level
ground at constant speed. If the wheel is pushed by a tractive
17. U 6 April/May’15
force of 60N applied horizontally at the centre of the wheel, find
the coefficient of rolling resistance.
Nov/Dec’14,April/
18. Define coefficient of friction and limiting friction. E 6
May’09
State the coulomb’s law of dry friction State the laws of dry May/June’14,
19. R 6
friction. Nov/Dec’12.
If the co-efficient of friction between all surfaces is 0.2,what is the
20. horizontal force required to get the 500 kg block placed below the U 6 May/June’14
200 kg block for moving to the right?
A body is rotating with an initial angular velocity of 3 rad/s. Its
21. angular velocity increases to 10 rad/s in 5 seconds. Find the U 6 May/June’14
angular acceleration of the body.
Nov/Dec’13,April/
22. Give the causes of rolling resistance. U 6 may’08
A flywheel has a mass moment of inertia of 11 kgm2 about the axis
23. of rotation. It runs at a constant angular velocity of 94.25 rad/s. E 6 May/June’13
Find the kinetic energy of the flywheel.
24. Differentiate static and dynamic friction. R 6 Nov/Dec’12
S.
Questions BT CO’s Year
No
A ladder of weight 390 N and 6m long is placed against a vertical
wall at an angle of 30◦ as shown in Fig., below. The coefficient of
friction between the ladder and the wall is 0.25 and between
ladder and floor is 0.38. Find how high a man of weight 1170 N can
climb sliding.
1. U 6 May/June’16
Nov/Dec’15,
5. Define angle of friction and angle of repose. U 6
Nov/Dec’03.
14. A force of 300N is required just to move a block up a plane inclined U 6 May/June’13
at 20◦ to the horizontal, the force being applied parallel to the
plane Fig., below. If the inclination of the plane is increased to 25◦,
the force required just to move the block up is 340N, ( the force is
acting parallel to the plane). Determine the weight of the block
and the coefficient of friction.
17. Explain the term ”Coefficient of friction” and “limiting friction” R 6 Nov/Dec’12
18. U 6 Nov/Dec’12
Nov/Dec’10,
24. R 6
April/May’04
What should be the value of θ in Fig., below? Which will make the
motion of 900N blocks down the plane to impend? The coefficient
of friction for all contact surfaces is 1/3.
Nov/Dec’10,
25. U 6
May/June’05
34. E 4 May/June’08
The force acting on the block are shown in Fig., below. Determine
whether the block is in equilibrium and find the magnitude and
direction of the friction force. Take µs = 0.35 and µk = 0.25.
35. E 6 May/June’08
Determine the least value of ‘P’ required to cse the motion impend
the system shown in Fig., below. Assume coefficient of friction on
all contact surface as 0.2
42. U 6 May/June’06
46. R 6 April/May’03
STAFF INCHARGES
1.
Dr. Sathishkumar B
2.
MR. Robinson J
3.
Mr. Gandhiram T