Escolar Documentos
Profissional Documentos
Cultura Documentos
MINING
EXTRACTION
EQUIPMENT
PART D
Caterpillar ®
Performance
Handbook
Edition 44
800.437.4228
www.hawthornecat.com
© 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
HYDRAULIC MINING SHOVELS
CONTENTS The first digit designates the 6000 Series and is fol-
lowed by another three digits indicating the approxi-
HYDRAULIC MINING SHOVELS mate bucket payload of that model in metric tonnes.
General Introduction. . . . . . . . . . . . . . . . . . . . . . 16-53 Without any extra letters, the specific model is a diesel
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-54 driven hydraulic mining shovel with a backhoe attach-
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-55 ment. If the machine has a front shovel attachment with
Digging Envelopes/Working Range/ diesel drive, the letters “FS,” are added to the four-digit
Digging Forces. . . . . . . . . . . . . . . . . . . . . . . . . 16-65 number, separated by a space character. An electrically
General Dimensions . . . . . . . . . . . . . . . . . . . . . . 16-79 driven hydraulic mining shovel will show an inserted
Ground Pressures . . . . . . . . . . . . . . . . . . . . . . . . 16-84 “AC” after the four-digit number. For instance a 6030 FS
Bucket Selection . . . . . . . . . . . . . . . . . . . . . . . . . 16-87 is a front shovel with a payload of approximately 30 met-
Cycle Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-88 ric tonnes and diesel engines.
Production Overviews . . . . . . . . . . . . . . . . . . . . . 16-90 The following table gives a summary of all versions
currently available.
Diesel Drive Electric Drive
GENERAL INTRODUCTION
Backhoe Front Shovel Backhoe Front Shovel
Hydraulic Mining Shovels 6015 6015 FS N/A N/A
Hydraulic mining shovels are designed to move large 6018 6018 FS 6018 AC 6018 AC FS
volumes of materials, and the majority are employed
6030 6030 FS 6030 AC 6030 AC FS
in the mining industry for loading large Mining and
Off-Highway Trucks. Key design characteristics are 6040 6040 FS 6040 AC 6040 AC FS
high digging forces and quick working cycles for best 6050 6050 FS 6050 AC 6050 AC FS
performance, and a durable design to handle severe 6060 6060 FS 6060 AC 6060 AC FS
working conditions. Hydraulic mining shovels dig and N/A 6090 FS N/A 6090 AC FS
load various commodities, such as gold, copper, iron N/A = Not Available
ore, diamonds and coal, or they remove overburden,
in any climatic condition around the world. Typically Technical Specifications
operated around the clock, Hydraulic Mining Shovels
accumulate up to 6500 hours per year. All data given herewith is subject to change. The spec-
alogs/spec sheets for individual models may have been
Nomenclature updated after publishing of this Performance Handbook
The 6000 Series constitutes the Cat hydraulic mining edition.
shovel product line. The name of each individual model
gives a direct reference to the size of the machine and Contact Details
consists of a four-digit number, plus additional capital If there are any questions or comments regarding the
letters in specific cases, depending on the particular information on hydraulic mining shovels given in this
drive system and attachment configuration. chapter please contact:
Volker.Boernke@cat.com or
Dirk.Tegtmeier@cat.com
16
Edition 44 16-53
16-54 Edition 44
6015 6015
MODEL Standard Attachment Mass Excavation Attachment
Total Flywheel Power: Net 496 kW 665 hp 496 kW 665 hp
Approximate Operating Weight* 105 600 kg 232,810 lb 106 100 kg 233,910 lb
Standard Bucket Capacity (heaped 1:1) 6.0 m³ 7.8 yd³ 7.0 m³ 9.2 yd³
Standard Engine Model: C18 ACERT™ Tier 3 C18 ACERT Tier 3
Number of Engines 1 1
Rated Net Power SAE J1349 496 kW 665 hp 496 kW 665 hp
Rated Engine RPM 1800 1800
Displacement 18.1 L 1105 in³ 18.1 L 1105 in³
No. Cylinders 6 6
Emissions U.S. EPA Flex U.S. EPA Flex
EU Flex EU Flex
Maximum Hydraulic Pump Output at Rated RPM:
Implement 2 × 552 L/min 2 × 146 gpm 2 × 552 L/min 2 × 146 gpm
Swing 287 L/min 76 gpm 287 L/min 76 gpm
Relief Valve Settings:
Implement Circuits (attachment) 30 000 kPa 4350 psi 30 000 kPa 4350 psi
Travel Circuits 30 000 kPa 4350 psi 30 000 kPa 4350 psi
Swing Circuits 35 000 kPa 5080 psi 35 000 kPa 5080 psi
Pilot Circuits 3500 kPa 508 psi 3500 kPa 508 psi
Maximum Swing Speed 5.1 RPM 5.1 RPM
Maximum Drawbar Pull 652 kN 146,575 lbf 652 kN 146,575 lbf
Maximum Travel Speed at Rated RPM:
Low — —
High 2.7 km/h 1.7 mph 2.7 km/h 1.7 mph
Standard Track Pad Width 600 mm 2'0" 600 mm 2'0"
Track Gauge 3800 mm 12'6" 3800 mm 12'6"
Overall Track Length 6010 mm 19'9" 6010 mm 19'9"
Fuel Tank Capacity 1300 L 343 U.S. gal 1300 L 343 U.S. gal
Hydraulic Oil System (includes tank) 1700 L 449 U.S. gal 1700 L 449 U.S. gal
Hydraulic Oil Tank 1300 L 343 U.S. gal 1300 L 343 U.S. gal
Standard Backhhoe Attachment:
Monoboom 7800 mm 25'7" 7300 mm 23'11"
Stick 3300 mm 10'10" 2800 mm 9'2"
Bucket Range 4.6-6.0 m³ 6.0-7.8 yd³ 4.6-7.0 m³ 6.0-9.2 yd³
Maximum Tearout Force 390 kN 87,640 lbf 430 kN 96,630 lbf
Maximum Breakout Force 390 kN 87,640 lbf 410 kN 92,140 lbf
*Operating weights include coolant, lubricants, full fuel tank, standard track pads, standard bucket and operator.
16
Edition 44 16-55
16-56 Edition 44
16
Edition 44 16-57
16-58 Edition 44
16
Edition 44 16-59
16-60 Edition 44
Edition 44 16-61
16-62 Edition 44
16
Edition 44 16-63
16-64 Edition 44
ft m
ft
6015
MODEL Standard Attachment
Working Range
Maximum Digging Depth 7.3 m 23'11"
Maximum Digging Reach 13.5 m 44'3"
Maximum Digging Height 13.0 m 42'8"
Digging Forces
Maximum Tearout Force (arm cylinder) 390 kN 87,640 lbf
Maximum Breakout Force (bucket cylinder) 390 kN 87,640 lbf
16
Edition 44 16-65
ft m
ft
6015
MODEL Mass Excavation Attachment
Working Range
Maximum Digging Depth 6.0 m 19'8"
Maximum Digging Reach 12.6 m 41'4"
Maximum Digging Height 13.0 m 42'8"
Digging Forces
Maximum Tearout Force (arm cylinder) 430 kN 96,630 lbf
Maximum Breakout Force (bucket cylinder) 410 kN 92,140 lbf
16-66 Edition 44
ft m
ft
MODEL 6018
Working Range
Maximum Digging Depth 8.5 m 27'11"
Maximum Digging Reach 15.6 m 51'2"
Maximum Digging Height 13.2 m 43'4"
Digging Forces
Maximum Tearout Force (arm cylinder) 530 kN 119,110 lbf
Maximum Breakout Force (bucket cylinder) 500 kN 112,370 lbf
16
Edition 44 16-67
ft m
ft
MODEL 6030
Working Range
Maximum Digging Depth 6.2 m 20'4"
Maximum Digging Reach 15.1 m 49'6"
Maximum Digging Height 13.8 m 45'3''
Digging Forces
Maximum Tearout Force (arm cylinder) 920 kN 206,750 lbf
Maximum Breakout Force (bucket cylinder) 890 kN 200,010 lbf
16-68 Edition 44
ft m
ft
MODEL 6040
Working Range
Maximum Digging Depth 7.0 m 23'0"
Maximum Digging Reach 17.7 m 58'1"
Maximum Digging Height 16.8 m 55'1"
Digging Forces
Maximum Tearout Force (arm cylinder) 1020 kN 229,220 lbf
Maximum Breakout Force (bucket cylinder) 1120 kN 251,700 lbf
16
Edition 44 16-69
ft m
ft
MODEL 6050
Working Range
Maximum Digging Depth 9.2 m 30'2"
Maximum Digging Reach 19.5 m 64'0"
Maximum Digging Height 16.8 m 55'1"
Digging Forces
Maximum Tearout Force (arm cylinder) 1100 kN 247,220 lbf
Maximum Breakout Force (bucket cylinder) 1210 kN 271,920 lbf
16-70 Edition 44
ft m
ft
MODEL 6060
Working Range
Maximum Digging Depth 8.9 m 29'2"
Maximum Digging Reach 18.9 m 62'0"
Maximum Digging Height 15.9 m 52'2"
Digging Forces
Maximum Tearout Force (arm cylinder) 1220 kN 274,170 lbf
Maximum Breakout Force (bucket cylinder) 1240 kN 278,670 lbf
16
Edition 44 16-71
ft m
ft
MODEL 6015 FS
Working Range
Maximum Digging Height 11.0 m 36'1"
Maximum Digging Reach 10.5 m 34'5"
Maximum Digging Depth 2.2 m 7'3"
Maximum Dumping Height 8.8 m 28'10"
Crowd Distance on Level 3.9 m 12'10"
Digging Forces
Maximum Crowd Force (arm cylinder) 650 kN 146,070 lbf
Maximum Crowd Force at Ground Level (arm cylinder) 480 kN 107,870 lbf
Maximum Breakout Force (bucket cylinder) 490 kN 110,120 lbf
16-72 Edition 44
ft m
ft
MODEL 6018 FS
Working Range
Maximum Digging Height 13.2 m 43'4"
Maximum Digging Reach 12.9 m 42'4"
Maximum Digging Depth 2.3 m 7'7"
Maximum Dumping Height 10.1 m 33'2"
Crowd Distance on Level 4.8 m 15'9"
Digging Forces
Maximum Crowd Force (arm cylinder) 910 kN 204,500 lbf
Maximum Crowd Force at Ground Level (arm cylinder) 810 kN 182,030 lbf
Maximum Breakout Force (bucket cylinder) 730 kN 164,050 lbf
16
Edition 44 16-73
ft m
ft
MODEL 6030 FS
Working Range
Maximum Digging Height 13.9 m 45'7"
Maximum Digging Reach 13.7 m 44'11"
Maximum Digging Depth 2.5 m 8'2"
Maximum Dumping Height 10.7 m 35'1"
Crowd Distance on Level 4.9 m 16'1"
Digging Forces
Maximum Crowd Force (arm cylinder) 1320 kN 296,640 lbf
Maximum Crowd Force at Ground Level (arm cylinder) 1210 kN 271,920 lbf
Maximum Breakout Force (bucket cylinder) 960 kN 215,740 lbf
16-74 Edition 44
ft m
ft
MODEL 6040 FS
Working Range
Maximum Digging Height 14.4 m 47'3"
Maximum Digging Reach 15.4 m 50'6"
Maximum Digging Depth 2.6 m 8'6"
Maximum Dumping Height 10.9 m 35'9"
Crowd Distance on Level 5.1 m 16'9"
Digging Forces
Maximum Crowd Force (arm cylinder) 1730 kN 388,780 lbf
Maximum Crowd Force at Ground Level (arm cylinder) 1200 kN 269,680 lbf
Maximum Breakout Force (bucket cylinder) 1200 kN 269,680 lbf
16
Edition 44 16-75
ft m
ft
MODEL 6050 FS
Working Range
Maximum Digging Height 15.3 m 50'2"
Maximum Digging Reach 16.2 m 53'2"
Maximum Digging Depth 2.4 m 7'10"
Maximum Dumping Height 11.8 m 38'9"
Crowd Distance on Level 5.5 m 19'0"
Digging Forces
Maximum Crowd Force (arm cylinder) 1930 kN 433,730 lbf
Maximum Crowd Force at Ground Level (arm cylinder) 1650 kN 370,800 lbf
Maximum Breakout Force (bucket cylinder) 1530 kN 343,840 lbf
16-76 Edition 44
ft m
ft
MODEL 6060 FS
Working Range
Maximum Digging Height 15.5 m 50'10"
Maximum Digging Reach 16.4 m 53'10"
Maximum Digging Depth 2.7 m 8'10"
Maximum Dumping Height 11.6 m 38'1"
Crowd Distance on Level 5.5 m 18'1"
Digging Forces
Maximum Crowd Force (arm cylinder) 2250 kN 505,640 lbf
Maximum Crowd Force at Ground Level (arm cylinder) 2100 kN 471,930 lbf
Maximum Breakout Force (bucket cylinder) 1740 kN 391,030 lbf
16
Edition 44 16-77
ft m
ft
MODEL 6090 FS
Working Range
Maximum Digging Height 20.2 m 66'3"
Maximum Digging Reach 19.0 m 62'4"
Maximum Digging Depth 2.3 m 7'7"
Maximum Dumping Height 14.5 m 47'7"
Crowd Distance on Level 6.2 m 20'4"
Digging Forces
Maximum Crowd Force (arm cylinder) 3090 kN 694,420 lbf
Maximum Crowd Force at Ground Level (arm cylinder) 3080 kN 692,170 lbf
Maximum Breakout Force (bucket cylinder) 2420 kN 543,850 lbf
16-78 Edition 44
16
Edition 44 16-79
16-80 Edition 44
16
Edition 44 16-81
16-82 Edition 44
16
Edition 44 16-83
GROUND PRESSURE
The ground pressure specifies the specific weight load
transferred to the surface, and can be an indicator for
the stability against subsidence. Though such conditions
typically apply to smaller excavators in heavy earthmov-
ing operations, there could be rare instances where this
may apply in mining applications. Nevertheless, the vast
majority of hydraulic mining shovels are delivered with
standard track shoes.
The value is determined by setting the machine weight
force in relation to the ground contact area of the tracks.
Ground Contact Area
Keys
A = Width of standard track shoe
B = Track length, idler center to sprocket center
C = Overall track length, grouser bar to grouser bar
To define the ground contact area on soft ground the
following formula is applied:
2 × A × (B + (C – B) × 0.35)
16-84 Edition 44
Backhoe Configurations
Track Shoe Width of Operating Ground Ground
MODEL Type Track Shoe [A] Weight Contact Area Pressure
mm in kg lb cm² in² N/cm² psi
6015 Standard 600 23.6 105 600 232,810 61 820 9580 16.7 24.2
Option 1 750 29.5 107 000 235,890 77 280 11,980 13.6 19.7
Option 2 900 35.4 108 500 239,200 92 740 14,370 11.5 16.7
6018 Option 600 23.6 184 000 405,650 72 800 11,280 24.8 36.0
Standard 800 31.5 186 000 410,060 97 070 15,050 18.8 27.3
6030 Option 1 800 31.5 294 000 648,150 104 920 16,260 27.5 39.8
Standard 1000 39.4 296 000 652,560 131 150 20,330 22.1 32.1
Option 2 1200 47.2 298 000 656,970 157 380 24,390 18.6 26.9
6040 Standard 1200 47.2 407 300 897,930 164 500 25,500 24.3 35.3
Option 1 1400 55.1 410 300 904,550 191 930 29,750 21.0 30.4
Option 2 1600 63.0 413 300 911,160 219 340 34,000 18.5 26.7
6050 Standard 1400 55.1 537 000 1,183,870 200 180 31,030 26.3 38.1
Option 1 1600 63.0 540 400 1,191,370 228 770 35,460 23.2 33.6
Option 2 1800 70.9 545 900 1,203,490 257 360 39,890 20.8 30.2
6060 Standard 1400 55.1 570 300 1,257,280 219 500 34,020 25.5 37.0
Option 1 1600 63.0 573 900 1,265,220 250 850 38,880 22.4 32.6
Option 2 1800 70.9 579 800 1,278,230 282 200 43,740 20.2 29.2
NOTE: All measurements are based on the standard machine configuration.
NOTE: All optional track shoes are long lead items.
Edition 44 16-85
16-86 Edition 44
16
Keys
B = Length of strike plane
A = Surface area of side wall beneath strike plane
W = Inside width between side walls
Edition 44 16-87
CYCLE TIMES However, the bucket fill process constitutes the main
fraction of the loading cycle, with a portion between
The cycle time of a hydraulic mining shovel is an
40% and 50% of the total time. This is heavily influenced
important productivity factor, and a key driver for high
by the material parameters, therefore, the different cycle
or low performance. There are two main areas that
times, shown for each model in the attached diagram,
influence cycle times. One factor is the pure technical
only consider the increasing effort to fill the bucket:
capabilities of the hydraulic mining shovel. The engine
output and associated hydraulic power defines the maxi- ● Ideal loading conditions — Loose material, such as dry
mum available oil flow, which consequently determines sand, soil and gravel, or re-handled or tipped material
the speed of the hydraulic cylinders and swing drives, with no effort to achieve a good fill. Bucket can pen-
and ultimately the achievable working speed of the etrate anywhere in the face or pile without resistance.
machine. The other factor is site specific parameters,
● Average loading conditions — Soft overburden with
such as operator skill, bench height (in particular for
hydraulic front shovels), and swing angle, will impact low grade of compaction, and well-shot material with
cycle times considerably. Material fragmentation and good and consistent fragmentation. Operator doesn’t
penetration resistance make a big difference, as well. have to concentrate on loosening or finding the right
spot for penetration.
Large hydraulic mining shovels are used as the prime
● Average digging conditions — Shot rock with par-
mover in most applications. Therefore, the set-up of the
loading area is pre-considered to be favorable for pro- tially interlocked sections, or compacted overburden,
ductive loading conditions when defining cycle times. requiring some effort to loosen the material.
Those are for example: ● Severe digging conditions — Inhomogeneous shot rock
with oversized boulders and interlocking, or unblasted
For backhoe For face shovel
material. Also free digging applications in sediment
machines machines
type of rock. Considerable effort required to break out
Truck position lower level same level
material.
Average swing angle 60°–90° 90°
Bench height similar to 75% of max.
stick length reach height
A complete working cycle of a hydraulic mining shovel
can be separated into four segments:
● Bucket fill
● Swing loaded
● Dump
● Swing empty
16-88 Edition 44
32
30
28
Seconds
26
24
22
20
6015/6015 FS 6018/6018 FS 6030/6030 FS 6040/6040 FS 6050/6050 FS 6060/6060 FS 6090 FS
Key
Severe digging conditions
Edition 44 16-89
PRODUCTION OVERVIEWS
As with any other piece of material handling equip-
ment, the productivity of a hydraulic mining shovel
depends on various aspects. These influencing factors
are either defined by pure machine specifications, such
as bucket capacity, or by application conditions and
operator skills, like bucket fill factor and cycle time. In
addition, there are parameters, which fall neither under
the hydrauilc mining shovel’s physical capabilities, nor
can they be controlled by the shovel operator or the
set-up of the loading area. The major factors in this cat-
egory are truck spotting time and overall job efficiency.
The following tables indicate, for a typical hydraulic
mining shovel/truck combination, the wide range of
productivity figures in t/h (tons/h) under various condi-
tions. The overall job efficiency starts at 83%, which
corresponds to 50 minutes per hour. This efficiency is
generally achievable only during a short period of time,
and could be the relevant factor for a short time produc-
tion test. However, in the long-run, efficiency tends to be
in the 65% to 75% range. The grey highlighted area illus-
trates average productivity figures which can be expected
under typical site conditions.
Furthermore, the size of the truck, and the required
number of passes to load it, has an effect on hydraulic
mining shovel productivity. The larger the truck, the
higher the hydraulic mining shovel’s productivity will be,
because unproductive truck spotting time will be reduced.
16-90 Edition 44
Edition 44 16-91
16-92 Edition 44
Edition 44 16-93
MODEL: 6015 ME and 6015 FS ● Bucket Size: 9.2 yd³ ● Number of Cycles: 4
● Material Density: 3030 lb/yd³ ● Average Loading Conditions
Fill Factor 100% 95%
Load per Bucket 13.9 tons 13.2 tons
Load per Truck 55.8 tons 53.0 tons
Cycle Time 21 sec 23 sec 25 sec 27 sec 21 sec 23 sec 25 sec 27 sec
Job
Efficiency Truck Spotting 0.35 min 0.38 min 0.42 min 0.45 min 0.35 min 0.38 min 0.42 min 0.45 min
30 sec 0.50 min 1752 tons/h 1644 tons/h 1550 tons/h 1465 tons/h 1664 tons/h 1562 tons/h 1472 tons/h 1392 tons/h
83% =
45 sec 0.75 min 1513 tons/h 1432 tons/h 1360 tons/h 1294 tons/h 1437 tons/h 1361 tons/h 1292 tons/h 1230 tons/h
maximum
60 sec 1.00 min 1332 tons/h 1269 tons/h 1212 tons/h 1159 tons/h 1265 tons/h 1205 tons/h 1151 tons/h 1101 tons/h
50 min/hour
75 sec 1.25 min 1189 tons/h 1139 tons/h 1092 tons/h 1050 tons/h 1130 tons/h 1082 tons/h 1038 tons/h 997 tons/h
30 sec 0.50 min 1688 tons/h 1585 tons/h 1494 tons/h 1412 tons/h 1604 tons/h 1506 tons/h 1419 tons/h 1342 tons/h
45 sec 0.75 min 1458 tons/h 1381 tons/h 1311 tons/h 1248 tons/h 1385 tons/h 1312 tons/h 1245 tons/h 1185 tons/h
80%
60 sec 1.00 min 1283 tons/h 1223 tons/h 1168 tons/h 1117 tons/h 1219 tons/h 1162 tons/h 1109 tons/h 1061 tons/h
75 sec 1.25 min 1146 tons/h 1098 tons/h 1053 tons/h 1012 tons/h 1089 tons/h 1043 tons/h 1000 tons/h 961 tons/h
30 sec 0.50 min 1583 tons/h 1486 tons/h 1400 tons/h 1324 tons/h 1504 tons/h 1412 tons/h 1330 tons/h 1258 tons/h
45 sec 0.75 min 1367 tons/h 1294 tons/h 1229 tons/h 1170 tons/h 1299 tons/h 1230 tons/h 1167 tons/h 1111 tons/h
75%
60 sec 1.00 min 1203 tons/h 1146 tons/h 1095 tons/h 1048 tons/h 1143 tons/h 1089 tons/h 1040 tons/h 995 tons/h
75 sec 1.25 min 1074 tons/h 1029 tons/h 987 tons/h 949 tons/h 1021 tons/h 977 tons/h 938 tons/h 901 tons/h
30 sec 0.50 min 1477 tons/h 1387 tons/h 1307 tons/h 1236 tons/h 1403 tons/h 1318 tons/h 1242 tons/h 1174 tons/h
45 sec 0.75 min 1276 tons/h 1208 tons/h 1147 tons/h 1092 tons/h 1212 tons/h 1148 tons/h 1090 tons/h 1037 tons/h
70%
60 sec 1.00 min 1123 tons/h 1070 tons/h 1022 tons/h 978 tons/h 1067 tons/h 1017 tons/h 971 tons/h 929 tons/h
75 sec 1.25 min 1003 tons/h 960 tons/h 921 tons/h 885 tons/h 953 tons/h 912 tons/h 875 tons/h 841 tons/h
30 sec 0.50 min 1372 tons/h 1288 tons/h 1214 tons/h 1147 tons/h 1303 tons/h 1223 tons/h 1153 tons/h 1090 tons/h
45 sec 0.75 min 1185 tons/h 1122 tons/h 1065 tons/h 1014 tons/h 1126 tons/h 1066 tons/h 1012 tons/h 963 tons/h
65%
60 sec 1.00 min 1043 tons/h 994 tons/h 949 tons/h 908 tons/h 991 tons/h 944 tons/h 901 tons/h 862 tons/h
75 sec 1.25 min 931 tons/h 892 tons/h 855 tons/h 822 tons/h 885 tons/h 847 tons/h 813 tons/h 781 tons/h
16-94 Edition 44
Edition 44 16-95
MODEL: 6018 and 6018 FS ● Bucket Size: 13.1 yd³ ● Number of Cycles: 4
● Material Density: 3030 lb/yd³ ● Average Loading Conditions
Fill Factor 100% 95%
Load per Bucket 19.8 tons 18.9 tons
Load per Truck 79.4 tons 75.4 tons
Cycle Time 23 sec 25 sec 27 sec 29 sec 23 sec 25 sec 27 sec 29 sec
Job
Efficiency Truck Spotting 0.38 min 0.42 min 0.45 min 0.48 min 0.38 min 0.42 min 0.45 min 0.48 min
30 sec 0.50 min 2342 tons/h 2207 tons/h 2086 tons/h 1978 tons/h 2225 tons/h 2096 tons/h 1982 tons/h 1879 tons/h
83% =
45 sec 0.75 min 2040 tons/h 1936 tons/h 1843 tons/h 1758 tons/h 1938 tons/h 1840 tons/h 1751 tons/h 1670 tons/h
maximum
60 sec 1.00 min 1807 tons/h 1725 tons/h 1651 tons/h 1582 tons/h 1716 tons/h 1639 tons/h 1568 tons/h 1503 tons/h
50 min/hour
75 sec 1.25 min 1621 tons/h 1555 tons/h 1495 tons/h 1438 tons/h 1540 tons/h 1478 tons/h 1420 tons/h 1367 tons/h
30 sec 0.50 min 2257 tons/h 2127 tons/h 2011 tons/h 1907 tons/h 2144 tons/h 2020 tons/h 1910 tons/h 1812 tons/h
45 sec 0.75 min 1966 tons/h 1866 tons/h 1776 tons/h 1695 tons/h 1868 tons/h 1773 tons/h 1688 tons/h 1610 tons/h
80%
60 sec 1.00 min 1741 tons/h 1663 tons/h 1591 tons/h 1525 tons/h 1654 tons/h 1580 tons/h 1511 tons/h 1449 tons/h
75 sec 1.25 min 1563 tons/h 1499 tons/h 1441 tons/h 1386 tons/h 1485 tons/h 1424 tons/h 1369 tons/h 1317 tons/h
30 sec 0.50 min 2116 tons/h 1994 tons/h 1885 tons/h 1788 tons/h 2010 tons/h 1894 tons/h 1791 tons/h 1698 tons/h
45 sec 0.75 min 1843 tons/h 1750 tons/h 1665 tons/h 1589 tons/h 1751 tons/h 1662 tons/h 1582 tons/h 1509 tons/h
75%
60 sec 1.00 min 1632 tons/h 1559 tons/h 1492 tons/h 1430 tons/h 1551 tons/h 1481 tons/h 1417 tons/h 1358 tons/h
75 sec 1.25 min 1465 tons/h 1406 tons/h 1351 tons/h 1300 tons/h 1392 tons/h 1335 tons/h 1283 tons/h 1235 tons/h
30 sec 0.50 min 1975 tons/h 1861 tons/h 1759 tons/h 1668 tons/h 1876 tons/h 1768 tons/h 1672 tons/h 1585 tons/h
45 sec 0.75 min 1720 tons/h 1633 tons/h 1554 tons/h 1483 tons/h 1634 tons/h 1551 tons/h 1477 tons/h 1409 tons/h
70%
60 sec 1.00 min 1524 tons/h 1455 tons/h 1392 tons/h 1335 tons/h 1447 tons/h 1382 tons/h 1323 tons/h 1268 tons/h
75 sec 1.25 min 1367 tons/h 1312 tons/h 1261 tons/h 1213 tons/h 1299 tons/h 1246 tons/h 1198 tons/h 1153 tons/h
30 sec 0.50 min 1834 tons/h 1728 tons/h 1634 tons/h 1549 tons/h 1742 tons/h 1642 tons/h 1552 tons/h 1472 tons/h
45 sec 0.75 min 1597 tons/h 1516 tons/h 1443 tons/h 1377 tons/h 1517 tons/h 1441 tons/h 1371 tons/h 1308 tons/h
65%
60 sec 1.00 min 1415 tons/h 1351 tons/h 1293 tons/h 1239 tons/h 1344 tons/h 1283 tons/h 1228 tons/h 1177 tons/h
75 sec 1.25 min 1270 tons/h 1218 tons/h 1171 tons/h 1127 tons/h 1206 tons/h 1157 tons/h 1112 tons/h 1070 tons/h
16-96 Edition 44
Edition 44 16-97
16-98 Edition 44
Edition 44 16-99
16-100 Edition 44
Edition 44 16-101
MODEL: 6040 and 6040 FS ● Bucket Size: 28.8 yd³ ● Number of Cycles: 4
● Material Density: 3030 lb/yd³ ● Average Loading Conditions
Fill Factor 100% 95%
Load per Bucket 43.6 tons 41.5 tons
Load per Truck 174.5 tons 165.8 tons
Cycle Time 24 sec 26 sec 28 sec 30 sec 24 sec 26 sec 28 sec 30 sec
Job
Efficiency Truck Spotting 0.40 min 0.43 min 0.47 min 0.50 min 0.40 min 0.43 min 0.47 min 0.50 min
30 sec 0.50 min 4995 tons/h 4715 tons/h 4465 tons/h 4240 tons/h 4745 tons/h 4479 tons/h 4242 tons/h 4028 tons/h
83% =
45 sec 0.75 min 4368 tons/h 4152 tons/h 3957 tons/h 3779 tons/h 4149 tons/h 3944 tons/h 3759 tons/h 3590 tons/h
maximum
60 sec 1.00 min 3880 tons/h 3709 tons/h 3552 tons/h 3408 tons/h 3686 tons/h 3524 tons/h 3375 tons/h 3238 tons/h
50 min/hour
75 sec 1.25 min 3491 tons/h 3351 tons/h 3223 tons/h 3104 tons/h 3316 tons/h 3184 tons/h 3062 tons/h 2949 tons/h
30 sec 0.50 min 4815 tons/h 4545 tons/h 4303 tons/h 4087 tons/h 4574 tons/h 4317 tons/h 4088 tons/h 3882 tons/h
45 sec 0.75 min 4210 tons/h 4002 tons/h 3814 tons/h 3642 tons/h 3999 tons/h 3802 tons/h 3623 tons/h 3460 tons/h
80%
60 sec 1.00 min 3740 tons/h 3575 tons/h 3424 tons/h 3285 tons/h 3553 tons/h 3396 tons/h 3253 tons/h 3121 tons/h
75 sec 1.25 min 3364 tons/h 3230 tons/h 3107 tons/h 2992 tons/h 3196 tons/h 3069 tons/h 2951 tons/h 2842 tons/h
30 sec 0.50 min 4514 tons/h 4261 tons/h 4034 tons/h 3831 tons/h 4288 tons/h 4048 tons/h 3833 tons/h 3640 tons/h
45 sec 0.75 min 3947 tons/h 3752 tons/h 3575 tons/h 3415 tons/h 3749 tons/h 3564 tons/h 3397 tons/h 3244 tons/h
75%
60 sec 1.00 min 3506 tons/h 3352 tons/h 3210 tons/h 3080 tons/h 3331 tons/h 3184 tons/h 3049 tons/h 2926 tons/h
75 sec 1.25 min 3154 tons/h 3028 tons/h 2912 tons/h 2805 tons/h 2996 tons/h 2877 tons/h 2767 tons/h 2665 tons/h
30 sec 0.50 min 4213 tons/h 3977 tons/h 3766 tons/h 3576 tons/h 4002 tons/h 3778 tons/h 3577 tons/h 3397 tons/h
45 sec 0.75 min 3684 tons/h 3502 tons/h 3337 tons/h 3187 tons/h 3499 tons/h 3327 tons/h 3170 tons/h 3028 tons/h
70%
60 sec 1.00 min 3272 tons/h 3128 tons/h 2996 tons/h 2875 tons/h 3109 tons/h 2972 tons/h 2846 tons/h 2731 tons/h
75 sec 1.25 min 2944 tons/h 2827 tons/h 2718 tons/h 2618 tons/h 2797 tons/h 2685 tons/h 2582 tons/h 2487 tons/h
30 sec 0.50 min 3912 tons/h 3693 tons/h 3497 tons/h 3320 tons/h 3716 tons/h 3508 tons/h 3322 tons/h 3154 tons/h
45 sec 0.75 min 3420 tons/h 3252 tons/h 3099 tons/h 2959 tons/h 3249 tons/h 3089 tons/h 2944 tons/h 2811 tons/h
65%
60 sec 1.00 min 3039 tons/h 2905 tons/h 2782 tons/h 2669 tons/h 2887 tons/h 2759 tons/h 2643 tons/h 2536 tons/h
75 sec 1.25 min 2734 tons/h 2625 tons/h 2524 tons/h 2431 tons/h 2597 tons/h 2493 tons/h 2398 tons/h 2309 tons/h
16-102 Edition 44
Edition 44 16-103
16-104 Edition 44
Edition 44 16-105
16-106 Edition 44
Edition 44 16-107
MODEL: 6060 and 6060 FS ● Bucket Size: 44.5 yd³ ● Number of Cycles: 4
● Material Density: 3030 lb/yd³ ● Average Loading Conditions
Fill Factor 100% 95%
Load per Bucket 67.4 tons 64.0 tons
Load per Truck 269.7 tons 256.2 tons
Cycle Time 25 sec 27 sec 29 sec 31 sec 25 sec 27 sec 29 sec 31 sec
Job
Efficiency Truck Spotting 0.42 min 0.45 min 0.48 min 0.52 min 0.42 min 0.45 min 0.48 min 0.52 min
30 sec 0.50 min 7496 tons/h 7087 tons/h 6720 tons/h 6390 tons/h 7121 tons/h 6733 tons/h 6384 tons/h 6070 tons/h
83% =
45 sec 0.75 min 6578 tons/h 6261 tons/h 5973 tons/h 5711 tons/h 6249 tons/h 5948 tons/h 5674 tons/h 5425 tons/h
maximum
60 sec 1.00 min 5860 tons/h 5607 tons/h 5375 tons/h 5162 tons/h 5567 tons/h 5327 tons/h 5107 tons/h 4904 tons/h
50 min/hour
75 sec 1.25 min 5284 tons/h 5077 tons/h 4886 tons/h 4709 tons/h 5020 tons/h 4823 tons/h 4642 tons/h 4474 tons/h
30 sec 0.50 min 7225 tons/h 6831 tons/h 6477 tons/h 6159 tons/h 6863 tons/h 6489 tons/h 6154 tons/h 5851 tons/h
45 sec 0.75 min 6340 tons/h 6035 tons/h 5757 tons/h 5504 tons/h 6023 tons/h 5733 tons/h 5469 tons/h 5229 tons/h
80%
60 sec 1.00 min 5648 tons/h 5405 tons/h 5181 tons/h 4975 tons/h 5366 tons/h 5134 tons/h 4922 tons/h 4727 tons/h
75 sec 1.25 min 5093 tons/h 4894 tons/h 4710 tons/h 4539 tons/h 4838 tons/h 4649 tons/h 4474 tons/h 4312 tons/h
30 sec 0.50 min 6773 tons/h 6404 tons/h 6073 tons/h 5774 tons/h 6434 tons/h 6084 tons/h 5769 tons/h 5485 tons/h
45 sec 0.75 min 5944 tons/h 5657 tons/h 5397 tons/h 5160 tons/h 5647 tons/h 5375 tons/h 5128 tons/h 4902 tons/h
75%
60 sec 1.00 min 5295 tons/h 5067 tons/h 4857 tons/h 4664 tons/h 5031 tons/h 4814 tons/h 4614 tons/h 4431 tons/h
75 sec 1.25 min 4774 tons/h 4588 tons/h 4415 tons/h 4255 tons/h 4536 tons/h 4359 tons/h 4195 tons/h 4043 tons/h
30 sec 0.50 min 6322 tons/h 5977 tons/h 5668 tons/h 5389 tons/h 6005 tons/h 5678 tons/h 5384 tons/h 5120 tons/h
45 sec 0.75 min 5547 tons/h 5280 tons/h 5038 tons/h 4816 tons/h 5270 tons/h 5016 tons/h 4786 tons/h 4575 tons/h
70%
60 sec 1.00 min 4942 tons/h 4729 tons/h 4533 tons/h 4353 tons/h 4695 tons/h 4493 tons/h 4307 tons/h 4136 tons/h
75 sec 1.25 min 4456 tons/h 4282 tons/h 4121 tons/h 3972 tons/h 4233 tons/h 4068 tons/h 3915 tons/h 3773 tons/h
30 sec 0.50 min 5870 tons/h 5550 tons/h 5263 tons/h 5004 tons/h 5577 tons/h 5272 tons/h 5000 tons/h 4754 tons/h
45 sec 0.75 min 5151 tons/h 4903 tons/h 4678 tons/h 4472 tons/h 4894 tons/h 4658 tons/h 4444 tons/h 4249 tons/h
65%
60 sec 1.00 min 4589 tons/h 4391 tons/h 4210 tons/h 4042 tons/h 4360 tons/h 4172 tons/h 3999 tons/h 3840 tons/h
75 sec 1.25 min 4138 tons/h 3976 tons/h 3827 tons/h 3688 tons/h 3931 tons/h 3777 tons/h 3635 tons/h 3504 tons/h
16-108 Edition 44
Edition 44 16-109
16-110 Edition 44