Você está na página 1de 45

1800/1900/UMTS

|
DECIBEL ANTENNA
®

( 932LG65VTE-M

PCS Directed Dipole® Antenna


with Variable Downtilt
(TELETILT® Compatible)
XPol Panel Antennas

OV E RV I E W 1710 - 2170 MHz

P olarization diversity provides system planners with two or more antenna arrays
under a single radome, with launching polarizations of +/-45°. This approach
allows the design of high performance cells sites with a minimum number of antennas or
minimum need for Rx or Tx combining equipment.

To meet the needs of this growing application, Andrew offers the broadest selection of
configurations, each ideally optimized for exceptional performance.

Directed Dipole® Technology —


DECIBEL® LG Series Antennas

In high performance digital systems, the ability to tightly contain RF in the


desired sector reduces interference and softer hand-offs, improving
service quality. The DECIBEL® LG antenna series features a patent pending
dipole technology providing the best total RF containment profile.

( Exceptional Azimuth Plane RF Control — Best-in-class


total power (co-pol & cross pol) front-to-back and rapid roll-off,
ideal for CDMA, W-CDMA, and GSM Technology.

( Fixed and Variable Electrical Downtilt — Available with


fixed or variable tilt options, including compatibility with the TELETILT®
remote electrical tilt system.
( 932LG65VTE-B
( Sleek, Low Wind Load Mechanical Design — Designed
in a “half-pipe” radome, this family provides a low wind load in a rugged
mechanical package.

( 932LG65VTE-B
Available with Variable
Electrical Downtilt

( 932LG65VTE-B
Superior Roll-off and Front-to-Back Ratio

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
17
XPol Panel Antennas

1710 - 2170 MHz OV E RV I E W

Broadband —
DECIBEL® UMWD and ADFD Series Antennas

( Broadband 1710-2170 MHz — Using advanced phase shifter technology,


Andrew Corporation has developed an extensive line of antennas with excellent
performance over the entire band.

( UMWD Series — This family provides a complete line of 33˚, 65˚, and 90˚
X-Pol antennas, all with TELETILT® compatible variable electrical downtilt.

( ADFD Series — This series of products combines two UMWD antennas under a
single radome for both air combining technology or for dual band UMTS and GSM
1800 applications.

( UMWD-06516-XD
with ATM200-001 TELETILT® Actuator

( UMWDP-06516-XD
Provides Exceptional Pattern Shaping

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
18
XPol Panel Antennas

OV E RV I E W 1710 - 2170 MHz

GEN3XPOL™ —
Technology for Fixed Tilt Applications

( Technology Leader — The DECIBEL® 92xDG and 93xDG family features an air
dielectric feed system assuring consistent, repeatable RF performance, with strong
upper sidelobe suppression.

( Excellent Diversity Polarization Performance — Each array provides


a minimum port-to-port isolation of 30 dB or better and excellent cross-polar
discrimination, typically >15 dB in the 3 dB down sector.

( Excellent Gain Per Unit Length — Andrew GEN3XPOL™ air dielectric


technology provides for lower internal losses per unit length of the antenna, approxi-
mately 0.5 dB per meter compared to approximately 1 dB per meter for conventional
cable or circuit card transformer designs. Combined with advanced techniques for
grating lobe suppression, these arrays provide more gain in a smaller package.

( Superior IM Performance — GEN3XPOL™ construction eliminates all sources


of PIM in the critical RF current path from the transformer to the radiator. No welding,
soldering, rivets or screws are used in this RF circuit. Andrew conducts 100% PIM
testing on each array. Each array contains a direct ground, eliminating system noise
due to array response from nearby frequency generators.

( Quad Arrays for Air Combining — By combining two GEN3XPOL™ anten-


nas within a single radome, network operators can add additional frequency sets, while
minimizing transmit combining losses associated with traditional combining. Also
available with triple array.

( 932DG65T2E-M

GAIN vs LENGTH* Exceptional Cross Polar


Discrimination
69"
0
61" 330 30

56"
51"
300
60

270 90

18 17.5 18.5 18 -30

dBi dBi dBi dBi


240 -20
120

DECIBEL® Competitor Competitor Competitor


-10
DB932 1 2 3
( Air-Combining Using 210
0
150

180
* Comparison done at 1850 – 1990 MHz Andrew’s GEN3XPOL™
with 65˚ HBW arrays. Quad System

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
19
XPol Panel Antennas

1710 - 2170 MHz M O U N T I N G H A R DWA R E

DB380 Pipe Mounting Kit:


Standard mount supplied with each antenna, fits pipe sizes up to 3.5" in diameter.
( DB380
Antenna-to-Pipe DB390 Pipe Mounting Kit:
Mounting Kit Standard galvanized steel pipe mount supplied with each antenna, fits pipe sizes
1.25" to 4.25" in diameter.

DB5083 Downtilt Mounting Kit:


Optional mechanical downtilt brackets, providing downtilt to the first upper null
on the horizon independent of antenna length.

DB5098 Downtilt Mounting Kit:


Optional mechanical downtilt brackets, providing downtilt to the first upper null
on the horizon independent of antenna length.

DB5084-AZ Variable Azimuth Wall Mount:


Optional brackets for wall mounting provide azimuth rotation from +45˚ to -45˚,
minimizing required clearance from the wall.

DB5094-AZ Variable Azimuth Wall Mount:


Optional brackets for wall mounting provide azimuth rotation from +45˚ to -45˚,
minimizing required clearance from the wall.

600899A-2 Downtilt Mounting Kit:


Adjustable tilt mounting kit available for UMWD 33°/45° nd ADFD series antennas.
Designed to fit 1.3" (33mm) to 4.5" (114mm) O.D. pipe.

600691A-2 Downtilt Mounting Kit:


Downtilt mounting kit for UMWD 65˚/90˚ series antennas. Designed
to fit 1.7" (42mm) to 4.5" (114mm) O.D. pipe.
( DB390
Pipe Mounting Kit

( DB5098
Downtilt Mounting Kit

( DB5083 ( 600899A-2 ( 600691A-2


Downtilt Downtilt Downtilt
Mounting Kit Mounting Kit Mounting Kit
( DB5094-AZ
Variable Azimuth Wall Mount

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
20
XPol Panel Antennas

P R O D U C T P O R T F O L I O B Y H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

The following represents the core products in this family. Additional models may be
available. Contact dbtech@andrew.com or go to www.andrew.com for details.

Horizontal Beamwidth

+/-45° Quad Array Hex Array


Model Series (2 Connectors) (4 Connectors) (6 Connectors)
Length Profile 33° 45° 65° 90° 65° 90° 65° 90°

LG Series Directed Dipole® Gain – dBd (dBi) 16.4 (18.5) 15.9 (18)
51 In. (1.3 M) Tilt Options – Deg. 2, VT VT

UMWD/ADFD Series Gain – dBd (dBi) 12.3 (14.4)


30 In. (0.76 M) Tilt Options – Deg. 0, 2, 4, 6, 8,VT

Gain – dBd (dBi) 16.9 (19) 14.9 (17) 15.2 (17.3) 14.3 (16.4) 15.4 (17.5)
54 In. (1.37 M) Tilt Options – Deg. VT VT 0, 2, 4, 6,VT 0, 2, 4, 6,VT 0, 4, 6,VT

Gain – dBd (dBi) 18 (20.1)


57 In. (1.4 M) Tilt Options – Deg. 0,VT

Gain – dBd (dBi) 17 (19.1) 16.6 (18.7) 15.9 (18)


81 In. (2.1 M) Tilt Options – Deg. 0, 2, 4,VT VT VT

DG Series Gain – dBd (dBi) 14.5 (16.6) 13.2 (15.3) 14.5 (16.6) 12.9 (15)
36 In. (0.91 M) Tilt Options – Deg. 5 5 5 5

Gain – dBd (dBi) 14.9 (17)


40 In. (1.0 M) Tilt Options – Deg. 2

Gain – dBd (dBi) 15.6 (17.7)


48 In. (1.21 M) Tilt Options – Deg. 0,2

Gain – dBd (dBi) 16.9 (19) 14.9 (17) 14.7 (16.8) 16 (18.1) 14.9 (17) 14.9 (17) 13.7 (15.8)
51 In. (1.3 M) Tilt Options – Deg. 2 0, 2, 4, 6,VT 0, 2, 4,VT 0, 2, 4,VT 0, 2, 4,VT VT VT

Gain – dBd (dBi) 15.8 (19.7) 16.3 (18.4)


79 In. (2.0 M) Tilt Options – Deg. 2 2

Notes:

1. Products underlined are in development. Contact Andrew Corporation


for latest updates.
2. Gain values are representative, see detailed specifications for exact figures.

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
21
XPol Panel Antennas

1710 - 2170 MHz P R O D U C T P O R T F O L I O B Y H O R I Z O N TA L B E A M W I D T H

General Specifications
and Ordering Information

Typical Style 1 Model Number Sequence


STANDARD SPECIFICATIONS PATTERN/ARRAY STYLE
DG = GEN3XPOL™ Air Dielectric With USLS, XPol
PIM: ≤ -150 dBc
DF = MaxFill™ With Lower Lobe Null Fill, XPol
(2 tone, 20 Watt)
LG = Directed Dipole®, XPol
Impedance: 50 Ohms
SDG = Hex Array (6 Ports), XPol
Lightning Protection: DC Ground (DB) 9XX DG 65 T5 E - M
QDG = Quad Array (4 Ports) XPol
Frequency Bands
TILT OPTIONS
WARRANTY Connector Option
T# = Degree of Fixed Tilt
5 year warranty on all DB92X/DB93X Series antennas VT = VARI-TILT® Tilt Option
featuring 7-16 DIN connectors. RC = TELETILT® Compatible
3 dB Horizontal BW
CONNECTOR OPTIONS Pattern/Array Style
E = 7-16 DIN - Female (Bottom)
Series Type (92X/93X
A = 7-16 DIN - Female (Back)
Series Type Diversity
R = 7-16 DIN - Female (Top)
Polarized Panel)
N = N Type - Female (Bottom)
Optional, Not Used
On Tilt Models

FREQUENCY BANDS
M = 1850 - 1990 MHz
B = 1710 - 2170 MHz

Typical Style 2 Model Number Sequence

SERIES TYPE
UMWD = Dual Diversity, Wideband UMTS
ADFD = Quad Diversity, Wideband UMTS

PERFORMANCE OPTIONS
G = Gain Optimized
P = Pattern Optimized
UMWD P - 065 16 - X D M
Absence of Character Equals Mounting Hardware
Standard Performance Connector Type

TILT OPTIONS Tilt Option


# = Degree of Fixed Tilt Nominal gain (dBd)
X = Variable Tilt 3 dB Horizontal BW (Deg.)
CONNECTOR TYPE Performance Option
D = 7-16 DIN - Female Series Type (UMWD/ADFD
Series Type Diversity
MOUNTING HARDWARE Polarized Panel)
M = Adjustable Downtilt
Mount Included
Absence
of “M” = Mounting Hardware
Not Included

FREQUENCY BANDS
1710 - 2170 MHz

Specifications are subject to change. Please see our website for the latest information.

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
22
XPol Panel Antennas

3 0 ° & 3 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 30° 35°


FREQUENCY RANGE 1710-2490 MHz 1850-1990 MHz
DUAL ARRAY DUAL ARRAY
16, & 17 dBi / 0° Tilt 19.5 dBi / 2° Tilt

XPol
**MODEL DB992HG28N-B 932DG33T2A-M
TYPE Flat Panel ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-2170 2170-2490 1850-1990
Gain (dBd/dBi) 13.9 / 16 14.9 / 17 17.4 / 19.5
Horizontal Beamwidth (Deg.) 30 25 35
Elevation Beamwidth (Deg.) 30 25 6.5
USLS (dB) 17 18 >15
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0 0 2
VSWR <1.4:1 <2.0:1 <1.33:1
Front-To-Back Ratio (dB) 35 35 35
Isolation (dB) N/A N/A >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 100 50 250
Polarization Horizontal/Vertical Horizontal/Vertical +45°/-45°
Connector Location Bottom Bottom Back
Connector Type N Type - Female N Type - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 12 / 305 12 / 305 53.5 / 1,359
Width (inch/mm) 12 / 305 12 / 305 12.5 / 318
Depth (inch/mm) 5 / 127 5 / 127 3 / 76
Net Weight (lbs/kg) 3 / 1.4 3 / 1.4 19 / 8.6
Max. Flat Plate Area (ft2/m2) 0.75 / 0.07 0.75 / 0.07 2.58 / 0.24
Max. Wind Load at 100 mph (lbf/N) 40 / 178 40 / 178 143 / 636
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material ABS, UV Resistant ABS, UV Resistant Polycarbonate, UV Resistant

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB380
Optional Downtilt Kit DB5098 DB5098 DB5083
Optional Special Mounting DB5094-AZ DB5094-AZ DB5084-AZ
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

DB992HG28N-B (1710-2170 MHz) DB992HG28N-B (2170-2490 MHz) 932DG33T2A-M

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
23
XPol Panel Antennas

1710 - 2170 MHz 3 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 35°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
20.1, 20.4, & 20.6 dBi / 0° to 7° Tilt
**MODEL *UMWD-03319-XDM
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 18 / 20.1 18.3 / 20.4 18.5 / 20.6
Horizontal Beamwidth (Deg.) 35 33 31
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0-7 0-7 0-7
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 30 30 30
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 200 200 200
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 57 / 1,448 57 / 1,448 57 / 1,448
Width (inch/mm) 10.5 / 267 10.5 / 267 10.5 / 267
Depth (inch/mm) 5 / 127 5 / 127 5 / 127
Net Weight (lbs/kg) 29 / 13.1 29 / 13.1 29 / 13.1
Max. Flat Plate Area (ft2/m2) 2.37 / 0.22 2.37 / 0.22 2.37 / 0.22
Max. Wind Load at 100 mph (lbf/N) 132 / 587 132 / 587 132 / 587
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600899A-2 600899A-2 600899A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-03319-XDM (1710-1880 MHz) UMWD-03319-XDM (1850-1990 MHz) UMWD-03319-XDM (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
24
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65° 65° 65° 65°


FREQUENCY RANGE 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz
DUAL ARRAY DUAL ARRAY DUAL ARRAY DUAL ARRAY
16.6 dBi / 5° Tilt 17 dBi / 2° Tilt 17.8 dBi / 0° Tilt 17.7 dBi / 2° Tilt

XPol
**MODEL 928DG65T5E-M 929DG65T2E-M DB931DG65E-M 931DG65T2E-M
TYPE ±45° Diversity Panel ±45° Diversity Panel ±45° Diversity Panel ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1850-1990 1850-1990 1850-1990 1850-1990
Gain (dBd/dBi) 14.5 / 16.6 14.9 / 17 15.7 / 17.8 15.6 / 17.7
Horizontal Beamwidth (Deg.) 65 65 65 65
Elevation Beamwidth (Deg.) 9 6 6 6
USLS (dB) >15 >18 >17 >17
Null Fill (dB) – Below Peak N/A N/A N/A N/A
Beam Tilt (Deg.) 5 2 0 2
VSWR <1.33:1 <1.33:1 <1.33:1 <1.33:1
Front-To-Back Ratio (dB) 32 32 32 32
Isolation (dB) >30 >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 36 / 914 40 / 1,016 48.5 / 1,232 48.5 / 1,232
Width (inch/mm) 7 / 178 7 / 178 7 / 178 7 / 178
Depth (inch/mm) 3 / 76 3 / 76 3 / 76 3 / 76
Net Weight (lbs/kg) 8 / 3.6 8.5 / 3.9 9 / 4.1 9 / 4.1
Max. Flat Plate Area (ft2/m2) 0.54 / 0.05 0.65 / 0.06 0.86 / 0.08 0.86 / 0.08
Max. Wind Load at 100 mph (lbf/N) 32 / 141 36 / 158 45 / 201 46 / 202
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant

P a n e l
V E R T I C A L
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB390 DB390
Optional Downtilt Kit DB5098 DB5098 DB5098 DB5098
Optional Special Mounting DB5094-AZ DB5094-AZ DB5094-AZ DB5094-AZ
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

928DG65T5E-M 929DG65T2E-M DB931DG65E-M 931DG65T2E-M

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
25
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65° 65° 65° 65°


FREQUENCY RANGE 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz
DUAL ARRAY DUAL ARRAY DUAL ARRAY DUAL ARRAY
18.1 dBi / 0° Tilt 18.5 dBi / 2° Tilt 18 dBi / 2° Tilt 17.9 dBi / 4° Tilt
**MODEL DB932DG65E-M 932LG65T2A-M 932DG65T2E-M 932DG65T4E-M
TYPE ±45° Diversity Panel ±45° Directed Dipole ±45° Diversity Panel ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1850-1990 1850-1990 1850-1990 1850-1990
Gain (dBd/dBi) 16 / 18.1 16.4 / 18.5 15.9 / 18 15.8 / 17.9
Horizontal Beamwidth (Deg.) 65 65 65 65
Elevation Beamwidth (Deg.) 7 6.5 7 7
USLS (dB) >18 >18 >18 >18
Null Fill (dB) – Below Peak 25 20 25 25
Beam Tilt (Deg.) 0 2 2 4
VSWR <1.33:1 <1.33:1 <1.33:1 <1.33:1
Front-To-Back Ratio (dB) 32 40 32 32
Isolation (dB) >30 >30 >30 >30
Max. Input Power (Watts) 250 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Back Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 7 / 178 8.5 / 216 7 / 178 7 / 178
Depth (inch/mm) 3 / 76 6.5 / 165 3 / 76 3 / 76
Net Weight (lbs/kg) 9.5 / 4.3 13 / 5.9 9.5 / 4.3 9.5 / 4.3
Max. Flat Plate Area (ft2/m2) 0.86 / 0.08 0.86 / 0.08 0.86 / 0.08 0.86 / 0.08
Max. Wind Load at 100 mph (lbf/N) 50 / 217 50 / 217 50 / 217 50 / 217
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB390 DB390
Optional Downtilt Kit DB5098 DB5098 DB5098 DB5098
Optional Special Mounting DB5094-AZ DB5094-AZ DB5094-AZ DB5094-AZ
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

DB932DG65E-M 932LG65T2A-M 932DG65T2E-M 932DG65T4E-M


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
26
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65° 65° 65° 65°


FREQUENCY RANGE 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz
DUAL ARRAY DUAL ARRAY DUAL ARRAY DUAL ARRAY
17.7 dBi / 6° Tilt 17.7 dBi / 0° to 8° Tilt 17 dBi / 1° to 8° Tilt 17 dBi / 1° to 8° Tilt

XPol
**MODEL 932DG65T6E-M *932LG65VTE-M 932DG65VTE-M *932DG65RCE-M
TYPE ±45° Diversity Panel ±45° Directed Dipole ±45° Diversity Panel ±45° Diversity w/Remote Control
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1850-1990 1850-1990 1850-1990 1850-1990
Gain (dBd/dBi) 15.6 / 17.7 15.6 / 17.7 14.9 / 17 14.9 / 17
Horizontal Beamwidth (Deg.) 65 65 65 65
Elevation Beamwidth (Deg.) 7 7 6.5 6.5
USLS (dB) >16 >18 >15 >15
Null Fill (dB) – Below Peak 25 N/A N/A N/A
Beam Tilt (Deg.) 6 0-8 1-8 1-8
VSWR <1.33:1 <1.4:1 <1.4:1 <1.4:1
Front-To-Back Ratio (dB) 32 40 32 32
Isolation (dB) >30 >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 7 / 178 8.5 / 216 7 / 178 7 / 178
Depth (inch/mm) 3 / 76 7 / 178 3 / 76 3 / 76
Net Weight (lbs/kg) 9.5 / 4.3 20 / 9.1 11 / 5 14 / 6.3
Max. Flat Plate Area (ft2/m2) 0.86 / 0.08 1.13 / 0.11 1.18 / 0.11 1.18 / 0.11
Max. Wind Load at 100 mph (lbf/N) 50 / 217 61 / 271 66 / 294 66 / 294
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant

P a n e l
V E R T I C A L
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB390 DB390
Optional Downtilt Kit DB5098 DB5098 DB5098 DB5098
Optional Special Mounting DB5094-AZ DB5094-AZ DB5094-AZ DB5094-AZ
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

932DG65T6E-M 932LG65VTE-M 932DG65VTE-M 932DG65RCE-M

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
27
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65° 65° 65° 65°


FREQUENCY RANGE 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz
DUAL ARRAY QUAD ARRAY QUAD ARRAY QUAD ARRAY
19.7 dBi / 2° Tilt 16.6 dBi / 5° Tilt 18.1 dBi / 0° Tilt 18 dBi / 2° Tilt
**MODEL 938DG65T2A-M 928QDG65T5EM DB932QDG65EM 932QDG65T2EM
TYPE ±45° Diversity Panel ±45° Diversity Quad ±45° Diversity Quad ±45° Diversity Quad
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1850-1990 1850-1990 1850-1990 1850-1990
Gain (dBd/dBi) 17.6 / 19.7 14.5 / 16.6 16 / 18.1 15.9 / 18
Horizontal Beamwidth (Deg.) 65 65 65 65
Elevation Beamwidth (Deg.) 4 9 7 7
USLS (dB) >15 >15 >18 >18
Null Fill (dB) – Below Peak N/A N/A N/A N/A
Beam Tilt (Deg.) 2 5 0 2
VSWR <1.33:1 <1.33:1 <1.33:1 <1.33:1
Front-To-Back Ratio (dB) 30 32 32 32
Isolation (dB) >30 >30 >30 >30
Max. Input Power (Watts) 250 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45° +45°/-45°
Connector Location Back Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 79 / 2,007 36 / 914 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 7 / 178 13 / 330 13.5 / 343 13.5 / 343
Depth (inch/mm) 3 / 76 3 / 76 3 / 76 3 / 76
Net Weight (lbs/kg) 13.8 / 6.3 18 / 8.2 20.4 / 9.2 20.4 / 9.2
Max. Flat Plate Area (ft2/m2) 1.83 / 0.17 1.72 / 0.16 2.58 / 0.24 2.58 / 0.24
Max. Wind Load at 100 mph (lbf/N) 102 / 454 94 / 418 139 / 620 139 / 620
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390-3 DB380 DB380 DB380
Optional Downtilt Kit DB5098-3 DB5083 DB5083 DB5083
Optional Special Mounting N/A N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

938DG65T2A-M 928QDG65T5EM DB932QDG65EM 932QDG65T2EM


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
28
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65° 65° 65° 65°


FREQUENCY RANGE 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz
QUAD ARRAY QUAD ARRAY QUAD ARRAY HEX ARRAY
18 dBi / 2° Tilt 17.7 dBi / 4° Tilt 17 dBi / 1° to 8° Tilt 17 dBi / 1° to 8° Tilt

XPol
**MODEL 932QDG65T2RM 932QDG65T4EM 932QDG65VTEM 932SDG65VTEM
TYPE ±45° Diversity Quad ±45° Diversity Quad ±45° Diversity Quad ±45° Diversity Panel, Six Port
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1850-1990 1850-1990 1850-1990 1850-1990
Gain (dBd/dBi) 15.9 / 18 15.6 / 17.7 14.9 / 17 14.9 / 17
Horizontal Beamwidth (Deg.) 65 65 65 65
Elevation Beamwidth (Deg.) 6 7 6.5 6.5
USLS (dB) 16 >18 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A N/A
Beam Tilt (Deg.) 2 4 1-8 1-8
VSWR <1.33:1 <1.33:1 <1.4:1 <1.4:1
Front-To-Back Ratio (dB) 32 32 30 30
Isolation (dB) >30 >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45° +45°/-45°
Connector Location Top Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 13.5 / 343 13.5 / 343 14 / 356 20.5 / 521
Depth (inch/mm) 3 / 76 3 / 76 3 / 76 3.5 / 89
Net Weight (lbs/kg) 20.4 / 9.2 20.4 / 9.2 24 / 10.9 36 / 16.3
Max. Flat Plate Area (ft2/m2) 2.58 / 0.24 2.58 / 0.24 2.58 / 0.24 3.77 / 0.35
Max. Wind Load at 100 mph (lbf/N) 139 / 620 139 / 620 144 / 642 205 / 912
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant

P a n e l
V E R T I C A L
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray Light Gray
Std. Mounting Hardware DB380 DB380 DB380 DB380
Optional Downtilt Kit DB5083 DB5083 DB5083 DB5083
Optional Special Mounting N/A N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

932QDG65T2RM 932QDG65T4EM 932QDG65VTEM 932SDG65VTEM

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
29
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
14.4, 14.5, & 14.6 dBi / 0° Tilt
**MODEL UMWD-06513-0D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 12.3 / 14.4 12.4 / 14.5 12.5 / 14.6
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 13.6 12.8 12.2
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0 0 0
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 30.4 / 772 30.4 / 772 30.4 / 772
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 8 / 3.6 8 / 3.6 8 / 3.6
Max. Flat Plate Area (ft2/m2) 0.97 / 0.09 0.97 / 0.09 0.97 / 0.09
Max. Wind Load at 100 mph (lbf/N) 56 / 249 56 / 249 56 / 249
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-06513-0D (1710-1880 MHz) UMWD-06513-0D (1850-1990 MHz) UMWD-06513-0D (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
30
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
14.4, 14.5, & 14.6 dBi / 2° Tilt

XPol
**MODEL UMWD-06513-2D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 12.3 / 14.4 12.4 / 14.5 12.5 / 14.6
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 13.6 12.8 12.2
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 2 2 2
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 30.4 / 772 30.4 / 772 30.4 / 772
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 8 / 3.6 8 / 3.6 8 / 3.6
Max. Flat Plate Area (ft2/m2) 0.97 / 0.09 0.97 / 0.09 0.97 / 0.09
Max. Wind Load at 100 mph (lbf/N) 56 / 249 56 / 249 56 / 249
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-06513-2D (1710-1880 MHz) UMWD-06513-2D (1850-1990 MHz) UMWD-06513-2D (1900-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
31
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
14.3, 14.4, & 14.5 dBi / 4° Tilt
**MODEL UMWD-06513-4D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 12.2 / 14.3 12.3 / 14.4 12.4 / 14.5
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 13.6 12.8 12.2
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 4 4 4
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 30.4 / 772 30.4 / 772 30.4 / 772
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 8 / 3.6 8 / 3.6 8 / 3.6
Max. Flat Plate Area (ft2/m2) 0.97 / 0.09 0.97 / 0.09 0.97 / 0.09
Max. Wind Load at 100 mph (lbf/N) 56 / 249 56 / 249 56 / 249
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-06513-4D (1710-1880 MHz) UMWD-06513-4D (1850-1990 MHz) UMWD-06513-4D (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
32
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
14.3, 14.4, & 14.5 dBi / 6° Tilt

XPol
**MODEL UMWD-06513-6D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 12.2 / 14.3 12.3 / 14.4 12.4 / 14.5
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 13.6 12.8 12.2
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 6 6 6
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 30.4 / 772 30.4 / 772 30.4 / 772
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 8 / 3.6 8 / 3.6 8 / 3.6
Max. Flat Plate Area (ft2/m2) 0.97 / 0.09 0.97 / 0.09 0.97 / 0.09
Max. Wind Load at 100 mph (lbf/N) 56 / 249 56 / 249 56 / 249
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-06513-6D (1710-1880 MHz) UMWD-06513-6D (1850-1990 MHz) UMWD-06513-6D (1900-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
33
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
14.3, 14.4, & 14.5 dBi / 8° Tilt
**MODEL UMWD-06513-8D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 12.2 / 14.3 12.3 / 14.4 12.4 / 14.5
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 13.6 12.8 12.2
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 8 8 8
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >25 >25 >25
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 30.4 / 772 30.4 / 772 30.4 / 772
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 8 / 3.6 8 / 3.6 8 / 3.6
Max. Flat Plate Area (ft2/m2) 0.97 / 0.09 0.97 / 0.09 0.97 / 0.09
Max. Wind Load at 100 mph (lbf/N) 56 / 249 56 / 249 56 / 249
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-06513-8D (1710-1880 MHz) UMWD-06513-8D (1850-1990 MHz) UMWD-06513-8D (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
34
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
14.3, 14.4, & 14.5 dBi / 0° to 14° Tilt

XPol
**MODEL *UMWD-06513-XD
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 12.2 / 14.3 12.3 / 14.4 12.4 / 14.5
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 13.6 12.8 12.2
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0-14 0-14 0-14
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 - 0 to 8° >30 - 0 to 8° >30 - 0 to 8°

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 30.4 / 772 30.4 / 772 30.4 / 772
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 8 / 3.6 8 / 3.6 8 / 3.6
Max. Flat Plate Area (ft2/m2) 0.97 / 0.09 0.97 / 0.09 0.97 / 0.09
Max. Wind Load at 100 mph (lbf/N) 56 / 249 56 / 249 56 / 249
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-06513-XD (1710-1880 MHz) UMWD-06513-XD (1850-1990 MHz) UMWD-06513-XD (1900-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
35
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
17.7, 18, & 18.3 dBi / 0° Tilt
**MODEL DB932DG65E-B
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBd/dBi) 15.6 / 17.7 15.9 / 18 16.2 / 18.3
Horizontal Beamwidth (Deg.) 65 65 65
Elevation Beamwidth (Deg.) 7 6 6
USLS (dB) >15 >15 >15
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0 0 0
VSWR <1.4:1 <1.4:1 <1.4:1
Front-To-Back Ratio (dB) 30 30 30
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 7 / 178 7 / 178 7 / 178
Depth (inch/mm) 3 / 76 3 / 76 3 / 76
Net Weight (lbs/kg) 9.5 / 4.3 9.5 / 4.3 9.5 / 4.3
Max. Flat Plate Area (ft2/m2) 0.86 / 0.08 0.86 / 0.08 0.86 / 0.08
Max. Wind Load at 100 mph (lbf/N) 50 / 217 50 / 217 50 / 217
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Stainless Steel Stainless Steel Stainless Steel
Color Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB390
Optional Downtilt Kit DB5098 DB5098 DB5098
Optional Special Mounting DB5094-AZ DB5094-AZ DB5094-AZ
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

DB932DG65E-B (1710-1880 MHz) DB932DG65E-B (1850-1990 MHz) DB932DG65E-B (1920-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
36
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
17.6, 17.9, & 18.2 dBi / 2° Tilt

XPol
**MODEL 932DG65T2E-B
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1850 1850-1990 1920-2170
Gain (dBd/dBi) 15.5 / 17.6 15.8 / 17.9 16.1 / 18.2
Horizontal Beamwidth (Deg.) 65 63 62
Elevation Beamwidth (Deg.) 7 6.6 6.2
USLS (dB) >15 >15 >15
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 2 2 2
VSWR <1.4:1 <1.4:1 <1.4:1
Front-To-Back Ratio (dB) 30 30 30
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 7 / 178 7 / 178 7 / 178
Depth (inch/mm) 3 / 76 3 / 76 3 / 76
Net Weight (lbs/kg) 9.5 / 4.3 9.5 / 4.3 9.5 / 4.3
Max. Flat Plate Area (ft2/m2) 0.86 / 0.08 0.86 / 0.08 0.86 / 0.08
Max. Wind Load at 100 mph (lbf/N) 50 / 217 50 / 217 50 / 217
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant

P a n e l
V E R T I C A L
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB390
Optional Downtilt Kit DB5098 DB5098 DB5098
Optional Special Mounting DB5094-AZ DB5094-AZ DB5094-AZ
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

932DG65T2E-B (1710-1850 MHz) 932DG65T2E-B (1850-1990 MHz) 932DG65T2E-B (1920-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
37
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
17.5, 17.8, 18.1 dBi / 4° Tilt
**MODEL 932DG65T4E-B
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBd/dBi) 15.4 / 17.5 15.7 / 17.8 16 / 18.1
Horizontal Beamwidth (Deg.) 65 63 62
Elevation Beamwidth (Deg.) 7 6.7 6.4
USLS (dB) >15 >15 >17
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 4 4 4
VSWR <1.4:1 <1.4:1 <1.4:1
Front-To-Back Ratio (dB) 30 30 30
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 7 / 178 7 / 178 7 / 178
Depth (inch/mm) 3 / 76 3 / 76 3 / 76
Net Weight (lbs/kg) 9.5 / 4.3 9.5 / 4.3 9.5 / 4.3
Max. Flat Plate Area (ft2/m2) 0.86 / 0.08 0.86 / 0.08 0.86 / 0.08
Max. Wind Load at 100 mph (lbf/N) 50 / 217 50 / 217 50 / 217
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Stainless Steel Stainless Steel Stainless Steel
Color Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB390
Optional Downtilt Kit DB5098 DB5098 DB5098
Optional Special Mounting DB5094-AZ DB5094-AZ DB5094-AZ
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

932DG65T4E-B (1710-1880 MHz) 932DG65T4E-B (1850-1990 MHz) 932DG65T4E-B (1920-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
38
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
17.4, 17.7 & 18 dBi / 6° Tilt

XPol
**MODEL 932DG65T6E-B
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBd/dBi) 15.3 / 17.4 15.6 / 17.7 15.9 / 18
Horizontal Beamwidth (Deg.) 65 63 62
Elevation Beamwidth (Deg.) 7.2 6.7 6.5
USLS (dB) >15 >15 >17
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 6 6 6
VSWR <1.4:1 <1.4:1 <1.4:1
Front-To-Back Ratio (dB) 30 30 30
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 7 / 178 7 / 178 7 / 178
Depth (inch/mm) 3 / 76 3 / 76 3 / 76
Net Weight (lbs/kg) 9.5 / 4.3 9.5 / 4.3 9.5 / 4.3
Max. Flat Plate Area (ft2/m2) 0.86 / 0.08 0.86 / 0.08 0.86 / 0.08
Max. Wind Load at 100 mph (lbf/N) 50 / 217 50 / 217 50 / 217
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant

P a n e l
V E R T I C A L
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Stainless Steel Stainless Steel Stainless Steel
Color Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB390
Optional Downtilt Kit DB5098 DB5098 DB5098
Optional Special Mounting DB5094-AZ DB5094-AZ DB5094-AZ
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

932DG65T6E-B (1710-1880 MHz) 932DG65T6E-B (1850-1990 MHz) 932DG65T6E-B (1920-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
39
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
17.5, 17.7, & 18 dBi / 0° to 8° Tilt
**MODEL *932LG65VTE-B
TYPE ±45° Directed Dipole
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBd/dBi) 15.4 / 17.5 15.6 / 17.7 15.9 / 18
Horizontal Beamwidth (Deg.) 66 65 63
Elevation Beamwidth (Deg.) 7 6.6 6.2
USLS (dB) >15 >18 >18
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0-8 0-8 0-8
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 40 40 40
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 8.5 / 216 8.5 / 216 8.5 / 216
Depth (inch/mm) 7 / 178 7 / 178 7 / 178
Net Weight (lbs/kg) 20 / 9.1 20 / 9.1 20 / 9.1
Max. Flat Plate Area (ft2/m2) 1.13 / 0.11 1.13 / 0.11 1.13 / 0.11
Max. Wind Load at 100 mph (lbf/N) 61 / 271 61 / 271 61 / 271
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB390
Optional Downtilt Kit DB5098 DB5098 DB5098
Optional Special Mounting DB5094-AZ DB5094-AZ DB5094-AZ
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

932LG65VTE-B (1710-1880 MHz) 932LG65VTE-B (1850-1990 MHz) 932LG65VTE-B (1920-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
40
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
17.3, 17.6, & 17.8 dBi / 0° to 7° Tilt

XPol
**MODEL *UMWDP-06516-XD
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 15.2 / 17.3 15.5 / 17.6 15.7 / 17.8
Horizontal Beamwidth (Deg.) 65 65 65
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) >16 >16 >16
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0-7 0-7 0-7
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 200 200 200
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 54.5 / 1,384 54.5 / 1,384 54.5 / 1,384
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 13.2 / 6 13.2 / 6 13.2 / 6
Max. Flat Plate Area (ft2/m2) 1.83 / 0.17 1.83 / 0.17 1.83 / 0.17
Max. Wind Load at 100 mph (lbf/N) 101 / 449 101 / 449 101 / 449
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWDP-06516-XD (1710-1880 MHz) UMWDP-06516-XD (1850-1990 MHz) UMWDP-06516-XD (1900-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
41
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
18.7, 18.9, & 19.3 dBi / 0° Tilt
**MODEL UMWD-06517-0D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 16.6 / 18.7 16.8 / 18.9 17.2 / 19.3
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 4.5 4.3 4.1
USLS (dB) >18 >19 >19
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0 0 0
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 81 / 2,057 81 / 2,057 81 / 2,057
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 17 / 7.7 17 / 7.7 17 / 7.7
Max. Flat Plate Area (ft2/m2) 2.69 / 0.25 2.69 / 0.25 2.69 / 0.25
Max. Wind Load at 100 mph (lbf/N) 150 / 667 150 / 667 150 / 667
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-06517-0D (1710-1880 MHz) UMWD-06517-0D (1850-1990 MHz) UMWD-06517-0D (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
42
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
18.7 & 19 dBi / 2° Tilt

XPol
**MODEL UMWD-06517-2D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 16.6 / 18.7 16.6 / 18.7 16.9 / 19
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 4.5 4.3 4.1
USLS (dB) >17 >18 >18
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 2 2 2
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 81 / 2,057 81 / 2,057 81 / 2,057
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 17 / 7.7 17 / 7.7 17 / 7.7
Max. Flat Plate Area (ft2/m2) 2.69 / 0.25 2.69 / 0.25 2.69 / 0.25
Max. Wind Load at 100 mph (lbf/N) 150 / 667 150 / 667 150 / 667
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-06517-2D (1710-1880 MHz) UMWD-06517-2D (1850-1990 MHz) UMWD-06517-2D (1900-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
43
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
18.5 & 18.7 dBi / 4° Tilt
**MODEL UMWD-06517-4D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 16.6 / 18.7 16.4 / 18.5 16.6 / 18.7
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 4.5 4.3 4.1
USLS (dB) >15 >16 >16
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 4 4 4
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 81 / 2,057 81 / 2,057 81 / 2,057
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 17 / 7.7 17 / 7.7 17 / 7.7
Max. Flat Plate Area (ft2/m2) 2.69 / 0.25 2.69 / 0.25 2.69 / 0.25
Max. Wind Load at 100 mph (lbf/N) 150 / 667 150 / 667 150 / 667
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-06517-4D (1710-1880 MHz) UMWD-06517-4D (1850-1990 MHz) UMWD-06517-4D (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
44
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
18.7, 18.9, & 19.3 dBi / 0° to 5° Tilt

XPol
**MODEL *UMWD-06517-XD
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 16.6 / 18.7 16.8 / 18.9 17.2 / 19.3
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 4.5 4.3 4.1
USLS (dB) >15 >16 >16
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0-5 0-5 0-5
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 300 300 300
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 81 / 2,057 81 / 2,057 81 / 2,057
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 17 / 7.7 17 / 7.7 17 / 7.7
Max. Flat Plate Area (ft2/m2) 2.69 / 0.25 2.69 / 0.25 2.69 / 0.25
Max. Wind Load at 100 mph (lbf/N) 150 / 667 150 / 667 150 / 667
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-06517-XD (1710-1880 MHz) UMWD-06517-XD (1850-1990 MHz) UMWD-06517-XD (1900-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
45
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
QUAD ARRAY
17.4, 17.5, & 17.6 dBi / 0° Tilt
**MODEL ADFD1820-6565B-0D
TYPE ±45° Diversity Quad
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 15.3 / 17.4 15.4 / 17.5 15.5 / 17.6
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0 0 0
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 30 30 30
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 300 300 300
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 54.4 / 1,382 54.4 / 1,382 54.4 / 1,382
Width (inch/mm) 11.8 / 300 11.8 / 300 11.8 / 300
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 34.5 / 15.6 34.5 / 15.6 34.5 / 15.6
Max. Flat Plate Area (ft2/m2) 2.91 / 0.27 2.91 / 0.27 2.91 / 0.27
Max. Wind Load at 100 mph (lbf/N) 154 / 685 154 / 685 154 / 685
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600899A-2 600899A-2 600899A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

ADFD1820-6565B-0D (1710-1880 MHz) ADFD1820-6565B-0D (1850-1990 MHz) ADFD1820-6565B-0D (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
46
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
QUAD ARRAY
17.5, 17.6, & 17.7 dBi / 4° Tilt

XPol
**MODEL ADFD1820-6565B-4D
TYPE ±45° Diversity Quad
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 15.4 / 17.5 15.5 / 17.6 15.6 / 17.7
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 4 4 4
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 30 30 30
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 300 300 300
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 54.4 / 1,382 54.4 / 1,382 54.4 / 1,382
Width (inch/mm) 11.8 / 300 11.8 / 300 11.8 / 300
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 34.5 / 15.6 34.5 / 15.6 34.5 / 15.6
Max. Flat Plate Area (ft2/m2) 2.91 / 0.27 2.91 / 0.27 2.91 / 0.27
Max. Wind Load at 100 mph (lbf/N) 154 / 685 154 / 685 154 / 685
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600899A-2 600899A-2 600899A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

ADFD1820-6565B-4D (1710-1880 MHz) ADFD1820-6565B-4D (1850-1990 MHz) ADFD1820-6565B-4D (1900-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
47
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
QUAD ARRAY
17.3, 17.4, & 17.5 dBi / 6° Tilt
**MODEL ADFD1820-6565B-6D
TYPE ±45° Diversity Quad
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 15.2 / 17.3 15.3 / 17.4 15.4 / 17.5
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 6 6 6
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 30 30 30
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 300 300 300
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 54.4 / 1,382 54.4 / 1,382 54.4 / 1,382
Width (inch/mm) 11.8 / 300 11.8 / 300 11.8 / 300
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 34.5 / 15.6 34.5 / 15.6 34.5 / 15.6
Max. Flat Plate Area (ft2/m2) 2.91 / 0.27 2.91 / 0.27 2.91 / 0.27
Max. Wind Load at 100 mph (lbf/N) 154 / 685 154 / 685 154 / 685
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600899A-2 600899A-2 600899A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

ADFD1820-6565B-6D (1710-1880 MHz) ADFD1820-6565B-6D (1850-1990 MHz) ADFD1820-6565B-6D (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
48
XPol Panel Antennas

6 5 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
QUAD ARRAY
17.2, 17.4, & 17.6 dBi / 0° to 7° Tilt

XPol
**MODEL *ADFD1820-6565B-XD
TYPE ±45° Diversity Quad
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 15.1 / 17.2 15.3 / 17.4 15.5 / 17.6
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0-7 0-7 0-7
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 30 30 30
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 300 300 300
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 54.4 / 1,382 54.4 / 1,382 54.4 / 1,382
Width (inch/mm) 11.8 / 300 11.8 / 300 11.8 / 300
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 34.5 / 15.6 34.5 / 15.6 34.5 / 15.6
Max. Flat Plate Area (ft2/m2) 2.91 / 0.27 2.91 / 0.27 2.91 / 0.27
Max. Wind Load at 100 mph (lbf/N) 154 / 685 154 / 685 154 / 685
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600899A-2 600899A-2 600899A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

ADFD1820-6565B-XD (1710-1880 MHz) ADFD1820-6565B-XD (1850-1990 MHz) ADFD1820-6565B-XD (1900-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
49
XPol Panel Antennas

1710 - 2170 MHz 6 5 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 65°


FREQUENCY RANGE 1710-2170 MHz
QUAD ARRAY
18.7, 18.8, & 18.9 dBi / 0° to 5° Tilt
**MODEL *ADFD1820-6565C-XD
TYPE ±45° Diversity Quad
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 16.6 / 18.7 16.7 / 18.8 16.8 / 18.9
Horizontal Beamwidth (Deg.) 67 65 63
Elevation Beamwidth (Deg.) 4.5 4.3 4.1
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0-5 0-5 0-5
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 30 30 30
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 300 300 300
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 80 / 2,032 80 / 2,032 80 / 2,032
Width (inch/mm) 12 / 305 12 / 305 12 / 305
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 48 / 21.7 48 / 21.7 48 / 21.7
Max. Flat Plate Area (ft2/m2) 3.77 / 0.35 3.77 / 0.35 3.77 / 0.35
Max. Wind Load at 100 mph (lbf/N) 209 / 930 209 / 930 209 / 930
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600899A-2 600899A-2 600899A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

ADFD1820-6565C-XD (1710-1880 MHz) ADFD1820-6565C-XD (1850-1990 MHz) ADFD1820-6565C-XD (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
50
XPol Panel Antennas

7 0 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 70° 70°


FREQUENCY RANGE 1850-1990 MHz 1920-2170 MHz
DUAL ARRAY DUAL ARRAY
17 dBi / 0° to 8° Tilt 17 dBi / 0° to 8° Tilt

XPol
**MODEL 931DG70VTREM 932DG70VTREU
TYPE ±45° Three Sector ±45° Three Sector
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1850-1990 1920-2170
Gain (dBd/dBi) 14.9 / 17 14.9 / 17
Horizontal Beamwidth (Deg.) 70 70
Elevation Beamwidth (Deg.) 7 6.5
USLS (dB) >15 >15
Null Fill (dB) – Below Peak N/A N/A
Beam Tilt (Deg.) 0-8 0-8
VSWR <1.4:1 <1.4:1
Front-To-Back Ratio (dB) 25 25
Isolation (dB) >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250
Polarization +45°/-45° +45°/-45°
Connector Location Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 59.5 / 1,511 59.5 / 1,511
Width (inch/mm) 6.5 / 165 (Diameter) 6.5 / 165 (Diameter)
Depth (inch/mm) N/A N/A
Net Weight (lbs/kg) 25 / 11.4 25 / 11.4
Max. Flat Plate Area (ft2/m2) 0.86 / 0.08 0.86 / 0.08
Max. Wind Load at 100 mph (lbf/N) 48 / 214 48 / 214
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201
Radome Material PVC PVC

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum
Radiator Material Aluminum Aluminum
Hardware Material Integrated Flange Integrated Flange
Color Light Gray Light Gray
Std. Mounting Hardware 084549-001 084549-001
Optional Downtilt Kit N/A N/A
Optional Special Mounting N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

931DG70VTREM 932DG70VTREU

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
51
XPol Panel Antennas

1710 - 2170 MHz 9 0 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 90° 90° 90° 90°


FREQUENCY RANGE 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz
DUAL ARRAY DUAL ARRAY DUAL ARRAY DUAL ARRAY
15.3 dBi / 5° Tilt 16.8 dBi / 0° Tilt 16.7 dBi / 2° Tilt 16.6 dBi / 4° Tilt
**MODEL 928DG90T5E-M DB932DG90E-M 932DG90T2E-M 932DG90T4E-M
TYPE ±45° Diversity Panel ±45° Diversity Panel ±45° Diversity Panel ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1850-1990 1850-1990 1850-1990 1850-1990
Gain (dBd/dBi) 13.2 / 15.3 14.7 / 16.8 14.6 / 16.7 14.5 / 16.6
Horizontal Beamwidth (Deg.) 90 90 90 90
Elevation Beamwidth (Deg.) 9 7 7 7
USLS (dB) >15 >18 >18 >18
Null Fill (dB) – Below Peak N/A N/A N/A N/A
Beam Tilt (Deg.) 5 0 2 4
VSWR <1.33:1 <1.33:1 <1.33:1 <1.33:1
Front-To-Back Ratio (dB) 30 30 30 25
Isolation (dB) >30 >30 >30 >30
Max. Input Power (Watts) 250 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 36 / 914 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 7 / 178 7 / 178 7 / 178 7 / 178
Depth (inch/mm) 3 / 76 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 8 / 3.6 9.5 / 4.3 9.5 / 4.3 9.5 / 4.3
Max. Flat Plate Area (ft2/m2) 0.54 / 0.05 0.86 / 0.08 0.86 / 0.08 0.86 / 0.08
Max. Wind Load at 100 mph (lbf/N) 32 / 141 50 / 217 50 / 217 50 / 217
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB390 DB390
Optional Downtilt Kit DB5098 DB5098 DB5098 DB5098
Optional Special Mounting DB5094-AZ DB5094-AZ DB5094-AZ DB5094-AZ
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

928DG90T5E-M DB932DG90E-M 932DG90T2E-M 932DG90T4E-M


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
52
XPol Panel Antennas

9 0 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 90° 90° 90° 90°


FREQUENCY RANGE 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz
DUAL ARRAY DUAL ARRAY DUAL ARRAY QUAD ARRAY
16 dBi / 1° to 8° Tilt 16 dBi / 1° to 8° Tilt 18.4 dBi / 2° Tilt 15.3 dBi / 5° Tilt

XPol
**MODEL 932DG90VTE-M *932DG90RCE-M 938DG90T2A-M 928QDG90T5EM
TYPE ±45° Diversity Panel ±45° Diversity w/Remote Control ±45° Diversity Panel ±45° Diversity Quad
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1850-1990 1850-1990 1850-1990 1850-1990
Gain (dBd/dBi) 13.9 / 16 13.9 / 16 16.3 / 18.4 13.2 / 15.3
Horizontal Beamwidth (Deg.) 90 90 90 90
Elevation Beamwidth (Deg.) 6.5 6.5 4 9
USLS (dB) >15 >15 >18 >18
Null Fill (dB) – Below Peak N/A N/A N/A N/A
Beam Tilt (Deg.) 1-8 1-8 2 5
VSWR <1.4:1 <1.4:1 <1.33:1 <1.33:1
Front-To-Back Ratio (dB) 28 30 30 30
Isolation (dB) >30 >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Back Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308 79 / 2,007 36 / 914
Width (inch/mm) 7 / 178 7 / 178 7 / 178 13 / 330
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 11 / 5 11 / 5 13.8 / 6.3 18 / 8.2
Max. Flat Plate Area (ft2/m2) 0.86 / 0.08 0.86 / 0.08 1.83 / 0.17 1.72 / 0.16
Max. Wind Load at 100 mph (lbf/N) 50 / 217 50 / 217 102 / 454 94 / 418
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant

P a n e l
V E R T I C A L
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray Light Gray
Std. Mounting Hardware DB390 DB390 DB390-3 DB380
Optional Downtilt Kit DB5098 DB5098 DB5098-3 DB5083
Optional Special Mounting DB5094-AZ DB5094-AZ N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

932DG90VTE-M 932DG90RCE-M 938DG90T2A-M 928QDG90T5EM

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
53
XPol Panel Antennas

1710 - 2170 MHz 9 0 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 90° 90° 90° 90°


FREQUENCY RANGE 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz 1850-1990 MHz
QUAD ARRAY QUAD ARRAY QUAD ARRAY QUAD ARRAY
16.8 dBi / 0° Tilt 16.8 dBi / 2° Tilt 16.4 dBi / 4° Tilt 16.4 dBi / 4° Tilt
**MODEL DB932QDG90EM 932QDG90T2EM 932QDG90T4EM 932QDG90T4RM
TYPE ±45° Diversity Quad ±45° Diversity Quad ±45° Diversity Quad ±45° Diversity Quad
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1850-1990 1850-1990 1850-1990 1850-1990
Gain (dBd/dBi) 14.7 / 16.8 14.7 / 16.8 14.3 / 16.4 14.3 / 16.4
Horizontal Beamwidth (Deg.) 90 90 90 90
Elevation Beamwidth (Deg.) 7 6.5 7 6.5
USLS (dB) >15 >15 >15 >15
Null Fill (dB) – Below Peak N/A N/A N/A N/A
Beam Tilt (Deg.) 0 2 4 4
VSWR <1.33:1 <1.33:1 <1.33:1 <1.33:1
Front-To-Back Ratio (dB) 30 30 32 25
Isolation (dB) >30 >30 >30 >30
Max. Input Power (Watts) 250 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom Top
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 13.5 / 343 13.5 / 343 13.5 / 343 13.5 / 343
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 19 / 8.6 19 / 8.6 19 / 8.6 19 / 8.6
Max. Flat Plate Area (ft2/m2) 2.48 / 0.23 2.48 / 0.23 2.48 / 0.23 2.48 / 0.23
Max. Wind Load at 100 mph (lbf/N) 138 / 614 138 / 614 138 / 614 138 / 614
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant Polycarbonate, UV Resistant
Reflector Material Pass. Aluminum Pass. Aluminum Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel
Color Light Gray Light Gray Light Gray Light Gray
Std. Mounting Hardware DB380 DB380 DB380 DB380
Optional Downtilt Kit DB5083 DB5083 DB5083 DB5083
Optional Special Mounting N/A N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

DB932QDG90EM 932QDG90T2EM 932QDG90T4EM 932QDG90T4RM


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
54
XPol Panel Antennas

9 0 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 90° 90°


FREQUENCY RANGE 1850-1990 MHz 1850-1990 MHz
QUAD ARRAY HEX ARRAY
16 dBi / 1° to 8° Tilt 15.8 dBi / 1° to 8° Tilt

XPol
**MODEL 932QDG90VTEM 932SDG90VTEM
TYPE ±45° Diversity Quad ±45° Diversity Panel, Six Port
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1850-1990 1850-1990
Gain (dBd/dBi) 13.9 / 16 13.7 / 15.8
Horizontal Beamwidth (Deg.) 90 90
Elevation Beamwidth (Deg.) 6.5 6.5
USLS (dB) >15 >14
Null Fill (dB) – Below Peak N/A N/A
Beam Tilt (Deg.) 1-8 1-8
VSWR <1.33:1 <1.4:1
Front-To-Back Ratio (dB) 32 30
Isolation (dB) >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250
Polarization +45°/-45° +45°/-45°
Connector Location Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 51.5 / 1,308 51.5 / 1,308
Width (inch/mm) 14 / 356 20.5 / 521
Depth (inch/mm) 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 24 / 10.9 36 / 16.3
Max. Flat Plate Area (ft2/m2) 2.58 / 0.24 3.77 / 0.35
Max. Wind Load at 100 mph (lbf/N) 144 / 642 205 / 912
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201
Radome Material Polycarbonate, UV Resistant Polycarbonate, UV Resistant

P a n e l
V E R T I C A L
Reflector Material Pass. Aluminum Pass. Aluminum
Radiator Material Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel
Color Light Gray Light Gray
Std. Mounting Hardware DB380-3 DB380-3
Optional Downtilt Kit DB5083D DB5083D
Optional Special Mounting N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

932QDG90VTEM 932SDG90VTEM

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
55
XPol Panel Antennas

1710 - 2170 MHz 9 0 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 90°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
16.4, 16.3, & 15.9 dBi / 0° Tilt
**MODEL UMWD-09014-0D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 14.3 / 16.4 14.2 / 16.3 13.8 / 15.9
Horizontal Beamwidth (Deg.) 90 90 90
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) >16 >22 >19
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0 0 0
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 54.5 / 1,384 54.5 / 1,384 54.5 / 1,384
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 13.2 / 6.0 13.2 / 6.0 13.2 / 6.0
Max. Flat Plate Area (ft2/m2) 1.83 / 0.17 1.83 / 0.17 1.83 / 0.17
Max. Wind Load at 100 mph (lbf/N) 101 / 449 101 / 449 101 / 449
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-09014-0D (1710-1880 MHz) UMWD-09014-0D (1850-1990 MHz) UMWD-09014-0D (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
56
XPol Panel Antennas

9 0 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 90°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
16.4, 16.2, & 15.7 dBi / 2° Tilt

XPol
**MODEL UMWD-09014-2D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 14.3 / 16.4 14.1 / 16.2 13.6 / 15.7
Horizontal Beamwidth (Deg.) 90 90 90
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) >14 >14 >14
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 2 2 2
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 54.5 / 1,384 54.5 / 1,384 54.5 / 1,384
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 13.2 / 6.0 13.2 / 6.0 13.2 / 6.0
Max. Flat Plate Area (ft2/m2) 1.83 / 0.17 1.83 / 0.17 1.83 / 0.17
Max. Wind Load at 100 mph (lbf/N) 101 / 449 101 / 449 101 / 449
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-09014-2D (1710-1880 MHz) UMWD-09014-2D (1850-1990 MHz) UMWD-09014-2D (1900-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
57
XPol Panel Antennas

1710 - 2170 MHz 9 0 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 90°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
16.4, 16.1, & 15.4 dBi / 4° Tilt
**MODEL UMWD-09014-4D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 14.3 / 16.4 14 / 16.1 13.3 / 15.4
Horizontal Beamwidth (Deg.) 90 90 90
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) N/A N/A N/A
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 4 4 4
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 54.5 / 1,384 54.5 / 1,384 54.5 / 1,384
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 13.2 / 6.0 13.2 / 6.0 13.2 / 6.0
Max. Flat Plate Area (ft2/m2) 1.83 / 0.17 1.83 / 0.17 1.83 / 0.17
Max. Wind Load at 100 mph (lbf/N) 101 / 449 101 / 449 101 / 449
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-09014-4D (1710-1880 MHz) UMWD-09014-4D (1850-1990 MHz) UMWD-09014-4D (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
58
XPol Panel Antennas

9 0 ° H O R I Z O N TA L B E A M W I D T H 1710 - 2170 MHz

HORIZONTAL BEAMWIDTH 90°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
16.2, 15.8, & 14.9 dBi / 6° Tilt

XPol
**MODEL UMWD-09014-6D
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 14.1 / 16.2 13.7 / 15.8 12.8 / 14.9
Horizontal Beamwidth (Deg.) 90 90 90
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) N/A N/A N/A
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 6 6 6
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30

Directed Dipole®
V E R T I C A L
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 54.5 / 1,384 54.5 / 1,384 54.5 / 1,384
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 13.2 / 6.0 13.2 / 6.0 13.2 / 6.0
Max. Flat Plate Area (ft2/m2) 1.83 / 0.17 1.83 / 0.17 1.83 / 0.17
Max. Wind Load at 100 mph (lbf/N) 101 / 449 101 / 449 101 / 449
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome

P a n e l
V E R T I C A L
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-09014-6D (1710-1880 MHz) UMWD-09014-6D (1850-1990 MHz) UMWD-09014-6D (1900-2170 MHz)

O m n i
Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
59
XPol Panel Antennas

1710 - 2170 MHz 9 0 ° H O R I Z O N TA L B E A M W I D T H

HORIZONTAL BEAMWIDTH 90°


FREQUENCY RANGE 1710-2170 MHz
DUAL ARRAY
15.9, 15.6, & 15.2 dBi / 0° to 7° Tilt
**MODEL *UMWD-09014-XD
TYPE ±45° Diversity Panel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 1710-1880 1850-1990 1900-2170
Gain (dBd/dBi) 13.8 / 15.9 13.5 / 15.6 13.1 / 15.2
Horizontal Beamwidth (Deg.) 90 90 90
Elevation Beamwidth (Deg.) 7 6.5 6
USLS (dB) N/A N/A N/A
Null Fill (dB) – Below Peak N/A N/A N/A
Beam Tilt (Deg.) 0-7 0-7 0-7
VSWR <1.5:1 <1.5:1 <1.5:1
Front-To-Back Ratio (dB) 25 25 25
Isolation (dB) >30 >30 >30
Max. Input Power (Watts) 250 250 250
Polarization +45°/-45° +45°/-45° +45°/-45°
Connector Location Bottom Bottom Bottom
Connector Type 7-16 DIN - Female 7-16 DIN - Female 7-16 DIN - Female
MECHANICAL SPECIFICATIONS
Length (inch/mm) 54.5 / 1,384 54.5 / 1,384 54.5 / 1,384
Width (inch/mm) 6.8 / 173 6.8 / 173 6.8 / 173
Depth (inch/mm) 3.5 / 89 3.5 / 89 3.5 / 89
Net Weight (lbs/kg) 13.2 / 6.0 13.2 / 6.0 13.2 / 6.0
Max. Flat Plate Area (ft2/m2) 1.83 / 0.17 1.83 / 0.17 1.83 / 0.17
Max. Wind Load at 100 mph (lbf/N) 101 / 449 101 / 449 101 / 449
Max. Wind Speed (mph/kmh) 125 / 201 125 / 201 125 / 201
Radome Material UV Protected Radome UV Protected Radome UV Protected Radome
Reflector Material Aluminum Aluminum Aluminum
Radiator Material Aluminum Aluminum Aluminum
Hardware Material Galvanized Steel Galvanized Steel Galvanized Steel
Color Off White Off White Off White
Std. Mounting Hardware 600691A-2 600691A-2 600691A-2
Optional Downtilt Kit N/A N/A N/A
Optional Special Mounting N/A N/A N/A
Specifications are subject to change. Please see our website for the latest information.
*TELETILT® compatible.
**When ordering UMWD/ADFD series antennas, add an “M” to the end of the model number to include mounting hardware. The standard mounting hardware for the UMWD/ADFD antennas includes mechanical downtilting.

UMWD-09014-XD (1710-1880 MHz) UMWD-09014-XD (1850-1990 MHz) UMWD-09014-XD (1900-2170 MHz)


Azimuth Pattern
Elevation Pattern

Scale: 10˚ radials, 5 dB per division

ANDREW CORPORATION PHONE 1-800-676-5342 • (214) 631-0310 FAX 1-800-229-4706 • (214) 631-4706 WWW.ANDREW.COM
60

Você também pode gostar