Escolar Documentos
Profissional Documentos
Cultura Documentos
President
.. Company profile
General technical information
2
3
.. Fan introduction
Fan performance curves
6
8
.. Accessories
Guide to fan selection &typical application
21
24
Company Profile
Saudi Fan Industries was established in 1999 as another manufacturing division of steadily
growing organization " Refrigeration House Group" in order to fulfill requirements of local market
for air movement and control equipments.
As a member of Refrigeration House Group, that has market research for ventilation equipments
spread over 25 years, Saudi Fan Industries now has grown into a full swing manufacturing unit to
satisfy the demanding needs of air movement and control equipments for modern residential,
commercial and industrial zones.
Since its establishment, Saudi Fan Industries has acquired modern manufacturing technology in
order to achieve " Total Customer Satisfaction". Not only still it has been investing significant
resources in latest technology but also has created a medium where every one in the organization
can contribute. We have a stringent policy of research, development and making awareness of
technology throughout the organization. Saudi Fan Industries has been implementing ISO 9002
Quality Assurance System. As a result, Saudi Fan Industries’ products are manufactured precisely
and consistently through all production stages under strict quality control procedures.
Saudi Fan Industries strictly acting on the policy of " the high quality product should be delivered
to our valued customers right from the beginning".
Now Saudi Fan Industries is not only the leading supplier of air movement and control equipments
in Kingdom but also a famous name in entire Gulf. It offers a wide range of fans and ventilator
products for residential, commercial, institutional and industrial buildings in applications from
comfort ventilation to manufacturing processes.
Products are available for exhaust, supply, re-circulate, filtered, process and gravity applications.
Fans are available in either direct drive, or belt drive.
Saudi Fan Industries has significant production capacity in order to fulfill market's demand. It also
has a pool of qualified staff, who are fully dedicated to give best advice to our valued customer's
inquiries.
Saudi Fan Industries has technical collaboration with Rosenberg Ventilator GmbH. Who is a Certified
ISO 9001 manufacturer and its products are listed under following ratings:
R
General Technical Information
Rotor These resistence vary at the square of the air volume and can be
described in a specific characteristics curve.
Reference Code
D
E R A E 225 -4 K
E single inlet
R radial fan
impeller diameter
number of poles
K smaller motor
Fan Performance Curves
The performance curves for these fan types have been established in mounting position B (installed on the pressure
side and open on the suction side) and show the total pressure increase pt as a function of the volume flow.
The dynamic pressure pd2 refers to the flange cross-section at the outlet side of the fan. The performance curves refer
to an air density of 1.2 kg/m3.
ERAE 250-4
ERAE 250-4
230 V 60 Hz 1.5
1.0 kW IP 44
4.5 A 01.024
1460 min-1 19 kg
16 uF RE/RTE 5.0
50 RSE 5.5
220 Pa ED 5.0
2 MSE 1
: 02/2002
Accessories
Fan (Blower assembly) shall be as manufactured by Saudi Fan Industries, Saudi Arabia and shall be complete with a
High Efficiency Radial Fan type: ERAE / ERAD with either 50Hz or60 Hz external rotor motor suitable for 127V or 220V-1Ph
or 220V/380V-3 Phase power supply where required.
The complete fan shall be assembled using a compact combination of external rotor motor close coupled to a forward curve
impeller to realize best possible cooling. The external rotor motor shall have a minimum of IP 44 construction per DIN 40050;
the windings` insulation shall have class “B” construction with additional protection against moisture; each external rotor motor
shall be 100% compatible ordinary electronic speed controller by varying speed from 100% to 10% of rated speed
(Note : For 3 phase external rotor motors other methods of motor speed control variable speed driver or multi-tap step down
transformers should be availab le).
Each motor shall have a built-in thermal overload protection.
The casing shall be made from galvanized steel sheets or painted with an epoxy paint against corrosion protection.
The impeller shall be forward curve type and shall be made of galvanized steel.
Both impeller & external rotor motor shall be balanced at 2 levels as per DIN/ISO 1940 G 2.5.
Each fan shall be equipped in to an IP 44 terminal box with a wiring diagram.
Fan shall be UL & AMCA listed.
Typical application
ROOF CAP
SUPPLY AIR
FLOW
For contacts & inquiry Refrigeration House Group
.
P.O.Box.1823 - Al-Khobar.31952
SAUDI ARABIA
Head Office
Tel:(03) 882 1713 - 882 3515 Fax: (03)882 3066
. Manufacturing Divisions
Dammam 2nd Industrial City
National Factory Tel:(03) 812 1282 Fax: (03) 812 1848
Saudi Fan Industries Tel:(03) 812 1866 Fax: (03) 812 1894
. Contracting Division
Klimatechnik Tel: (03) 882 3534 Fax: (03) 882 2807
Riyadh Tel: (01) 465 6198 Fax: (01) 462 8347
. Trading Divisions
Refrigeration House
Al-Khobar Tel: (03) 869 1043 Fax: (03) 898 4161
Jubail Tel: (03) 361 5512 Fax: (03) 361 279
Riyadh Tel: (01) 476 9720 Fax: (01) 476 9518
Jeddah Tel: (02) 665 2276 Fax: (02) 661 2265
Al-Yaf Ind.
MODERN iNDS.C0. Abha Street
PETROL STATION
(TIDE)
S
NOTIONAL
FACTORY Saudi Fan Inds.
ABQAIQ HIGHWAY
Saudi Inds.
Al-Hamarani. Solvrnt C0.
N
-MOO
Dam
HALF ACH
BE
amm
MAIN ENTRANCE
2ND INDS. CITY
DAMMAM
S Saudi Fan Industries
High Efficiency Radial Fans High Efficiency Radial Fans Duct Fans