Escolar Documentos
Profissional Documentos
Cultura Documentos
Excavator control
New e-EPOS system (Electronic Power Optimizing System)
ᆺ ᆻ
ᆼ
ᆺ Advanced hydraulic circuit seperates the oil flow for travel
and boom function to allow precise and safe operation
DOOSAN DX340LCA ENGINE when handling loads during travel.
ᆻ The circuits for the boom, arm, and bucket have been
Maker & Model DOOSAN DE12TIS
improved to assure smooth and confident control during
Performance Standard DIN 6271, SAE J1349
combination.
Power (Max , Rated) 195 kW (265 PS) @ 1800 rpm (DIN 6271) Hydraulic Pump Swing Drive
ᆼ New technologically advanced control valve and joystick
185 kW (247 HP) @ 1800 rpm (SAE J1349) The Main pump has a capacity of Shocks during rotation are valves have been installed to allow speedy, smooth and
Max. Torque 114 kg.m/ 1400 rpm 2x247ഢ/min reducing cycle time minimized, while increased responsive control.
while a high capacity gear pump torque is available to
Fuel Consumption (Max , Rated) 155 g/ps.h @ RATED SPEED (TIER-II)
improves pilot line efficiency. ensure rapid cycles.
Comfort
3
1. Warning lights
2. Control panel
3. Operation modes
The work rate of the hydraulic excavator is directly linked to Control lever Choice of operating modes
the performace of its operator. DOOSAN designed the DX 340 Very precise control of the equipment increases versatility, safety Power mode - Standard : uses 88% engine power for all work
LCA by putting the operator at the center of the development and facilitates tricky operations requiring great precision. - Power : uses 100% engine power for heavy work
goals. The result is significant ergonomic value that improves Leveling operations and particularly the movement of suspended - Economy : 76% engine power
the efficiency and safety of the operator. loads are made easier and safer. The control levers have additional
electrical buttons for controlling other additional equipment
(for example, grabs, crushers, grippers, etc.)
Control panel
With color LCD display
3. 4.
Reliability & Maintenance
ᆻ Strengthened Arm
In the arm assembly greater strength has been gained Tracks Integrated Track Spring and Idler Improve the pilot hose material Apply CORG type · Captive O-Ring Groove
by using cast elements and reinforcement around the · Narrow groove hold O-ring in more effective way.
The chain is composed of self-lubricating The track spring and the idler have been joined directly · Resins ൺ Rubber
bosses to give it an increased lifetime. · This will prevent leaking by O-Ring damage.
sealed links isolated from all external to achieve high durability and improved maintenance · Decrease curve angle of hose
contamination. The tracks are locked by convenience.
mechanically bolted pins.
separator that removes most moisture Cylinders Quantity Bore x Rod diameter x stroke 2.01m
3
1.80m
3
1610mm 1676mm 1,692kg B C B
from the fuel. Boom 2 150 X 100 X 1,430mm SWING SPEED - 0 to 8.9 rpm
3 3
MAX. SWING TORQUE - 11660 kgf.m (EFF.=0.863) 2.35m 2.35m 1800mm 1760mm 1,870kg D D C
Arm 1 170 X 120 X 1,805mm
Bucket 1 150 X 100 X 1,300mm Based on ISO 10567 and SAE J296, arm length without quick change clamp
3 3
A. Suitable for materials with density of 2,100 kgವm (3,500 lb/yd ) or less
3 3
B. Suitable for materials with density of 1,800 kgವm (3,000 lb/yd ) or less
Weight 3 3
C. Suitable for materials with density of 1,500 kgವm (2,500 lb/yd ) or less
3 3
D. Suitable for materials with density of 1,200 kgವm (2,000 lb/yd ) or less
TRIPLE GROUSER
The protection of the hydraulic system The large capacity forced air cleaner (OPT)850G mm 0.47 kgf/cm2 35.0 ton Arm STD. Arm 3200mm [SAE] 16.3 / 17.3 , [ISO] 16.9 / 17.9 Bucket G.P [SAE] 20.4 / 21.7 , [ISO] 23.1 / 24.5
is more effective,using glass fiber filter removes over 99% of airborne particles, (OPT)900G mm 0.45 kgf/cm2 35.2 ton
technology in the main oil return filter. reducing the risk of engine contamination Short Arm 2600mm [SAE] 20.0 / 21.2 , [ISO] 20.7 / 22.0 H.D [SAE] 21.5 / 22.8 , [ISO] 23.4 / 24.8
(OPT)600DG mm 0.67 kgf/cm2 34.9 ton
and making the cleaning and cartridge
change intervals greater.
Dimensions Working Range
Standard
Dimensions (6,500mm(21'4")Boom, 3,200mm(10'6")Arm, 600mm(24")shoe)
Standard Option 1
Boom : 6,500mm(21'4") Arm : 3,200mm(10'6") Bucket : Without Bucket Shoe : 600mm(24") Boom : 6,500mm(21'4") Arm : 3,200mm(10'6") Bucket : Without Bucket Shoe : 700mm(28")
Standard Track : 3,280mm(10'9") Standard Track : 3,200mm(10'6")
Metric Unit : 1,000kg Metric Unit : 1,000kg
A(m) 1.5 3.0 4.5 6.0 7.5 9.0 Max. Reach A(m) 1.5 3.0 4.5 6.0 7.5 9.0 Max. Reach
B(m) A(m) B(m) A(m)
7.5 * 7.68 7.33 * 7.71 6.97 7.71 7.5 * 7.68 7.38 * 7.71 7.01 7.71
6.0 * 7.78 7.26 * 7.62 5.73 8.59 6.0 * 7.78 7.31 * 7.62 5.77 8.59
4.5 * 11.99 * 11.99 * 9.58 * 9.58 * 8.33 7.02 * 7.68 5.20 7.58 5.06 9.14 4.5 11.99 11.99 * 9.58 * 9.58 * 8.33 7.07 * 7.68 5.24 7.64 5.10 9.14
3.0 * 15.08 * 14.22 * 11.03 * 9.33 * 9.07 6.71 7.64 5.07 7.10 4.70 9.42 3.0 15.08 14.32 11.03 9.40 * 9.07 6.76 7.70 5.11 7.16 4.74 9.42
1.5 * 17.22 * 13.24 * 12.28 * 8.81 * 9.76 6.43 7.49 4.92 6.95 4.57 9.45 1.5 17.22 13.34 12.28 8.88 * 9.76 6.48 7.55 4.96 7.01 4.61 9.45
0 * 17.80 * 12.83 * 12.95 * 8.48 9.62 6.22 7.38 4.82 7.11 4.65 9.23 0 17.80 12.93 12.95 8.55 9.70 6.27 7.44 4.86 7.17 4.69 9.23
-1.5 * 14.10 * 14.10 * 17.27 * 12.76 * 12.91 * 8.35 9.52 6.13 7.64 4.98 8.76 -1.5 14.10 14.10 17.27 12.86 12.91 8.41 9.60 6.18 7.71 5.02 8.76
-3.0 * 16.70 * 16.79 * 21.31 * 21.31 * 15.81 * 12.90 * 12.07 * 8.39 * 9.30 6.18 * 8.45 5.72 7.97 -3.0 16.79 16.79 21.31 21.31 15.81 13.00 12.07 8.45 * 9.30 6.23 * 8.45 5.77 7.97
-4.5 * 17.23 * 17.23 * 13.14 * 13.10 * 9.96 * 8.63 * 8.35 7.36 6.76 -4.5 17.23 17.23 13.14 13.14 * 9.96 8.69 * 8.35 7.42 6.76
1. Lifting Capacities are in Compliance with ISO 10567 1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm. : Rating Over Front 2. Loading Point is The End of The Arm. : Rating Over Front
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities. 3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
: Rating Over Side or 360 Degree : Rating Over Side or 360 Degree
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities. 4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities.
5. The Least Stable Position is Over the Side. 5. The Least Stable Position is Over the Side.
Lifting Capacity
Option 2 Option 3
Boom : 6,500mm(21'4") Arm : 3,200mm(10'6") Bucket : Without Bucket Shoe : 600mm(24") Boom : 6,500mm(21'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 600mm(24")
Narrow Track : 3,000mm(9'8") Standard Track : 3,200mm(10'6")
Metric Unit : 1,000kg Metric Unit : 1,000kg
A(m) 1.5 3.0 4.5 6.0 7.5 9.0 Max. Reach A(m) 3.0 4.5 6.0 7.5 Max. Reach
B(m) A(m) B(m) A(m)
7.5 * 7.68 6.58 * 7.71 6.25 7.71 7.5 * 8.56 8.13 6.98
6.0 * 7.78 6.51 * 7.62 5.12 8.59 6.0 * 9.20 * 9.20 *8.46 7.15 * 8.38 6.47 7.95
4.5 11.99 11.99 * 9.58 8.87 * 8.33 6.27 * 7.68 4.63 7.55 4.51 9.14 4.5 13.37 13.37 10.36 9.77 * 8.90 6.95 * 8.38 5.64 8.53
3.0 15.08 12.46 11.03 8.28 * 9.07 5.98 7.61 4.50 7.08 4.18 9.42 3.0 11.71 9.21 * 9.55 6.68 7.85 5.21 8.83
1.5 17.22 11.53 12.28 7.78 * 9.76 5.70 7.46 4.36 6.93 4.05 9.45 1.5 12.75 8.76 9.84 6.43 7.68 5.07 8.87
0 17.80 11.14 12.95 7.46 9.59 5.50 7.35 4.26 7.08 4.11 9.23 0 17.72 12.89 13.14 8.51 9.67 6.27 7.90 5.18 8.64
-1.5 14.10 14.10 17.27 11.07 12.91 7.33 9.48 5.40 7.61 4.40 8.76 -1.5 16.74 12.93 12.79 8.44 9.62 6.23 8.61 5.62 8.12
-3.0 16.79 16.79 21.31 21.31 15.81 11.20 12.07 7.37 * 9.30 5.45 * 8.45 5.06 7.97 -3.0 18.82 18.82 14.88 13.14 11.54 8.56 * 9.05 6.63 7.26
-4.5 17.23 17.23 13.14 11.52 * 9.96 7.60 * 8.35 6.51 6.76 -4.5 14.37 14.37 11.56 11.56 * 8.64 * 8.64 5.91
1. Lifting Capacities are in Compliance with ISO 10567 1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm. : Rating Over Front 2. Loading Point is The End of The Arm. : Rating Over Front
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities. 3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities. : Rating Over Side or 360 Degree 4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities. : Rating Over Side or 360 Degree
5. The Least Stable Position is Over the Side. 5. The Least Stable Position is Over the Side.
Lifting Capacity
Option 4 Option 5
Boom : 6,500mm(21'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 700mm(28") Boom : 6,500mm(21'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 600mm(24")
Standard Track : 3,200mm(10'6") Narrow Track : 3,000mm(9'8")
Metric Unit : 1,000kg Metric Unit : 1,000kg
A(m) 3.0 4.5 6.0 7.5 Max. Reach A(m) 3.0 4.5 6.0 7.5 Max. Reach
B(m) A(m) B(m) A(m)
7.5 * 8.56 8.19 6.98 7.5 * 8.56 7.29 6.98
6.0 * 9.20 * 9.20 *8.46 7.2 * 8.38 6.52 7.95 6.0 * 9.20 9.19 * 8.46 6.41 * 8.38 5.79 7.95
4.5 13.37 13.37 10.36 9.84 * 8.90 7.0 * 8.38 5.68 8.53 4.5 13.37 13.34 10.36 8.71 * 8.90 6.21 * 8.38 5.03 8.53
3.0 11.71 9.27 * 9.55 6.73 7.92 5.25 8.83 3.0 11.71 8.16 * 9.55 5.94 7.82 4.64 8.83
1.5 12.75 8.82 9.92 6.48 7.75 5.11 8.87 1.5 12.75 7.73 9.81 5.70 7.65 4.50 8.87
0 17.72 12.98 13.14 8.57 9.75 6.32 7.96 5.22 8.64 0 17.72 11.19 13.14 7.48 9.63 5.54 7.87 4.59 8.64
-1.5 16.74 13.03 12.79 8.51 9.70 6.28 8.68 5.67 8.12 -1.5 16.74 11.23 12.79 7.42 9.59 5.51 8.58 4.98 8.12
-3.0 18.82 18.82 14.88 13.23 11.54 8.62 * 9.05 6.69 7.26 -3.0 18.82 18.82 14.88 11.43 11.54 7.53 * 9.05 5.87 7.26
-4.5 14.37 14.37 11.56 11.56 * 8.64 * 8.64 5.91 -4.5 14.37 14.37 11.56 11.56 * 8.64 * 8.06 5.91
1. Lifting Capacities are in Compliance with ISO 10567 1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm. : Rating Over Front 2. Loading Point is The End of The Arm. : Rating Over Front
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities. 3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities. : Rating Over Side or 360 Degree 4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities. : Rating Over Side or 360 Degree
5. The Least Stable Position is Over the Side. 5. The Least Stable Position is Over the Side.
Lifting Capacity
Option 6 Option 7
Boom : 6,200mm(20'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 600mm(24") Boom : 6,200mm(20'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 700mm(28")
Standard Track : 3,200mm(10'6") Standard Track : 3,200mm(10'6")
Metric Unit : 1,000kg Metric Unit : 1,000kg
A(m) 3.0 4.5 6.0 7.5 Max. Reach A(m) 3.0 4.5 6.0 7.5 Max. Reach
B(m) A(m) B(m) A(m)
7.5 * 8.96 * 8.96 * 8.98 8.98 6.58 7.5 * 8.96 * 8.96 * 8.98 * 8.98 6.58
6.0 * 9.33 * 9.33 *8.78 7.17 * 8.78 7.0 7.61 6.0 * 9.33 * 9.33 * 8.78 7.22 * 8.78 7.05 7.61
4.5 13.09 13.09 10.41 9.91 * 9.11 7.02 * 8.78 6.05 8.22 4.5 13.09 13.09 10.41 9.98 * 9.11 7.07 * 8.78 6.09 8.22
3.0 16.08 14.22 11.75 9.39 * 9.71 6.78 8.36 5.57 8.53 3.0 16.08 14.32 11.75 9.45 * 9.71 6.83 8.43 5.61 8.53
1.5 17.89 13.41 12.85 8.94 9.96 6.55 8.18 5.42 8.56 1.5 17.89 13.51 12.85 9.01 10.04 6.60 8.24 5.46 8.56
0 18.06 13.14 13.31 8.68 9.79 6.39 8.43 5.55 8.32 0 18.06 13.24 13.31 8.75 9.87 6.44 8.50 5.60 8.32
-1.5 17.81 17.81 17.13 13.14 12.96 8.61 9.76 6.36 9.26 6.06 7.79 -1.5 17.81 17.81 17.13 13.24 12.96 8.68 9.84 6.41 9.33 6.11 7.79
-3.0 19.66 19.66 15.13 13.34 11.54 8.73 * 9.58 7.26 6.89 -3.0 19.66 19.66 15.13 13.44 11.54 8.79 * 9.58 7.31 6.89
-4.5 14.42 14.42 11.28 11.28 * 9.07 * 9.07 5.44 -4.5 14.42 14.42 11.28 11.28 * 9.07 * 9.07 5.44
1. Lifting Capacities are in Compliance with ISO 10567 1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm. : Rating Over Front 2. Loading Point is The End of The Arm. : Rating Over Front
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities. 3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities. : Rating Over Side or 360 Degree 4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities. : Rating Over Side or 360 Degree
5. The Least Stable Position is Over the Side. 5. The Least Stable Position is Over the Side.
Lifting Capacity
Option 8
Boom : 6,200mm(20'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 600mm(24")
Narrow Track : 3,000mm(9'8")
Metric Unit : 1,000kg
Doosan Infracore
India Pvt.Ltd
Doosan Infracore Europe S.A. Germany Doosan Infracore do Brasil ServiÇos de Suporte Comercial Ltda.
Heinrich von stephan Strasse 2 Langenfeld-Fuhrkamp Alameda Santos 2222 CJ52, 5a andar, Cerqueria Cesar
DE-40764 Germany CEP 01418.200 Sao Paulo Brazil
Tel : 49 2173 2035218 Tel : 55 11 3061 3227
www.doosaninfracore.com/ce/ae/en