Você está na página 1de 39

.

GATE-2018 ECE

ANALYSIS OF GATE 2018


Electronics and Communication Engineering

Engineering
Electromagnetic General Aptitude Network Theory
Mathematics
Theory 15% 7%
14%
8% Signals and
Electronic Device Systems
Circuits 7%
12%

Communications Analog Circuits


11% Digital Circuits 8%
11% Control Systems
7%

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 1


.
GATE-2018 ECE

ECE ANALYSIS-2018_10-Feb_Morning
Total
SUBJECT No. of Ques. Topics Asked in Paper(Memory Based) Level of Ques.
Marks
Random Variables; Partial Derivative;
Engineering 1 Marks: 6
Taylor’s Series, polynomials, Eigen Moderate 14
Mathematics 2 Marks: 4
Values, Residue Differential Equation
Basic Components and types of circuits;
1 Marks: 1
Network Theory RC Circuits; RLC Circuits Easy 7
2 Marks: 3
Two Port Networks
Signals and 1 Marks: 3
Linearity, Pole-zero NQ camp, FS, DFT Easy 7
Systems 2 Marks: 2
1 Marks: 1 Feedback Controllers; State Space, Bode
Control Systems Moderate 7
2 Marks: 3 plot TD Analysis
Operational Amplifiers ; Trans Imp
1 Marks: 2
Analog Circuits Amplifier; Small Signal AM Diode; Zener Easy 8
2 Marks: 3
Diode
1 Marks: 3
Digital Circuits FSM, CMOS, LF, MUX, FF, ROM Moderate 11
2 Marks: 4
1 Marks: 3 AM, Binary Channel; Probability of error,
Communications Tough 11
2 Marks: 4 Gaussian Boise HT, RV
Electronic Device 1 Marks: 4 EB; Built in Potential; NMOS, CMOS, IC
Easy 12
Circuits 2 Marks: 4 Fabrications; P-N Junction, Solar cell
Electromagnetic 1 Marks: 2
SMIT, Transmission Lines, WG, OI, SD Easy 8
Theory 2 Marks: 3
1 Marks: 5 Filling Blanks, Geometry Numbers, GP,
General Aptitude Easy 15
2 Marks: 5 Mixt, CI, Probability
Total 65 100
Overall paper is tougher compared to last year. Mathematics is moderate level
Faculty Feedback
and aptitude is easy.

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 2


.
GATE-2018 ECE

GATE 2018 Examination


Electronics and Communication Engineering
Test Date: 10-Feb-2018
Test Time: 9:00 AM 12:00 PM
Subject Name: Electronics and Communication Engineering

General Aptitude
Q.1 - Q.5 Carry One Mark each.
1. “By giving him the last __________ of cake, you will ensure lasting __________ in our house
today”
(A) Peas, Piece (B) Piece, Peace
(C) Peace, Piece (D) Peace, Peas
[Ans. B*]
 Peace is a situation when there is no war or fighting and things are calm and quiet.
 Piece is a part of something.

2. Even though there is a vast scope for its _________ , tourism has remained a/an __________ area.
The words that best fill the blanks in the above sentence are
(A) Improvement, Neglected (B) Rejection, Approved
(C) Fame, Glam (D) Interest, Disinterested
[Ans. A*]
Even though there is a vast scope for its improvement, tourism has remained a neglected
area.

3. If the number 715■423 is divisible by 3 (■ denotes the missing digit in the thousandths
place), then the smallest whole number in the place of ■ is_________.
(A) 0 (B) 2
(C) 5 (D) 6
[Ans. B*]
715 ? 423
We know that the divisibility rule for 3 is sum of all digits should be divisible by 3.
7 + 1 + 5 + 4 + 2 + 3 = 22
So, the next number after sum 22 which are divisible by 3 are 24, 27, 30 etc.
So, 22 + 2 = 24; 22 + 5 = 27
But according to minimum condition 2 is right answer.

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 3


.
GATE-2018 ECE

4. What is the value of 1


(A) 2 (B) 7⁄4
(C) 3⁄2 (D) 4⁄3
[Ans. D*]
This is a infinite Geometric progression with first term (a) = 1
1
nd common ratio (r)
4
a
The formula for finding the sum of infinite . is given by
1 r
1 1 4
1 3 4 3

5. A 1.5 in tall person is standing at a distance of 3 m from a lamp post. The light from the
lamp at the top of the post casts her shadow. The length of the shadow is twice her height.
What is the height of the lamp post in meters?
(A) 1.5 (B) 3
(C) 4.5 (D) 6
[Ans. B*]

Height of lamp
post (h)
1.5
B
E
3 3
ABC and DEC are similar triangles
B B
E E
h 6
1.5 3
h
2
1.5
h 3 meter

Q.6 - Q.10 Carry Two Mark each.


6. A cab was involved in a hit and run accident at night You are given the following data
about the cabs in the city and the accident.
(i) 85% of cabs m the city are green and the remaining cabs are blue.
(ii) A witness identified the cab involved in the accident as blue.
(iii) It is known that a witness can correctly identify the cab colour only 80% of the time.
Which of the following options is closest to the probability that the accident was caused by
a blue cab'?
(A) 12% (B) 15%
(C) 41% (D) 80%
[Ans. C*]

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 4


.
GATE-2018 ECE

Let us suppose total numbers of cabs are 100.


85 are given and rest 15 is blue.
Witness is correct 80% of times in identifying.
Total number of blue cabs identified correctly.
8
(8 of 15) 15 12
1
Witness is incorrect 20% of times
That incorrectness should happen for green
2
(2 of 85) 85 17
1
Witness identifies 12 + 17 = 29 Cabs in total.
equired 12 12
robability 41.3 41
Total 12 17 29

7. Leila aspires to buy a car worth Rs. 10.00.000 after 5 years. What is the minimum amount
in Rupees that she should deposit now in a bank which offers 10% annual rate of interest,
if the interest was compounded annually?
(A) 5,00,000 (B) 6,21,000
(C) 6,66,667 (D) 7,50,000
[Ans. B*]
r
.1 /
1
1
1 (1 )
1
11
1 ( )
1
11
1 ( )
1
1 1
1
11 11
62 921.323 621

8. The Cricket Board has long recognized John's potential as a leader of the team. However.
his on-field temper has always been a matter of concern for them since his junior days.
While this aggression has filled stadia with die-hard fans, it has taken a toll on his own
batting. Until recently, it appeared that he found it difficult to convert his aggression into
big scores. Over the past three seasons though, that picture of John has been replaced by s
cerebral, calculative and successful bats man-captain. After many years, it appears that the
team has finally found a complete captain.
Which of the following statements can be logically inferred from the above paragraph?
(i) Even as a junior cricketer. John was considered a good captain.
(ii) Finding a complete captain is a challenge.
(iii) Fans and the flicker Board have differing views on what they want in a captain
(iv) Over the past three seasons John has accumulated big scores.
(A) (i), (ii) and (iii) only (B) (iii) and (iv) only

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 5


.
GATE-2018 ECE

(C) (ii) and (iv) only (D) (i), (ii), (iii) and (iv)
[Ans. C*]
Statement (i) is not true as nowhere it is mentioned that John was a captain in junior team.
The introductory line emphasizes on the board recognizing John's potential (Latent
quality/possibility) as leader of the team.
Statement (iii) also manipulates the facts mentioned in the argument.
The 3rd statement of the argument while this aggression has filled stadia with die-hard
fans does not indicate fans expectations from John as a caption.
Statement (ii) The concluding statement of the para suggests that finding a completer
captain is a tough task as it took John many years to become a successful and calculative
batsman - captain.
Statement (iv) can be explicitly concluded from the last 4 lines of the para.

9. Two alloys A and B contain gold and copper in the ratios of 2:3 and 3:7 by mass.
respectively. Equal masses of alloys A and B are melted to make an alloy C. The ratio of
gold to copper in alloy C is_________.
(A) 5:10 (B) 7:13
(C) 6:11 (D) 9:13
[Ans. B*]
Alloy A contains Gold and Copper.
Let a : 3x
Which is same as 4x : 6x Alloy B contains Copper 3x : 7x
As masses of Alloy A is equal to Alloy of mass B. i.e.
Gold Copper
i.e., Alloy 1 4x : 6x 1 x (mass)
Alloy 1 3x : 7x 1 x (mass)
Ratio of Gold to Copper is,
old from alloy 1 lod of alloy 2 4x 3x 7x 7
opper from alloy 1 opper of alloy 2 6x 7x 13x 13

10. A coastal region with unparalleled beauty is home to many species of animals. It is dotted
with coral reefs and unspoilt white sandy beaches. It has remained inaccessible to tourists
due to poor connectivity and lack of accommodation. A company has spotted the
opportunity and is planning to develop a luxury resort with helicopter service to the
nearest major city airport. Environmentalists are upset that this would lead to the region
becoming crowded and polluted like any other major beach resorts.
Which one of the following statements can be logically inferred from the information given
in the above paragraph?
(A) The culture and tradition of the local people will be influenced by the tourists.
(B) The region will become crowded and polluted due to tourism.
(C) The coral reefs are on the decline and could soon vanish.
(D) Helicopter connectivity would lead to an increase in. tourists coming to the region.
[Ans. D]

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 6


.
GATE-2018 ECE

Technical
Q.1 - Q.25 Carry One Mark each.
1. The ABCD matrix for a two-port network is defined by:
V B V
[ ] 0 1[ ]
I I
2 2

V 5 V

The parameter B for the given two-port network (in ohms, correct to two decimal places)
is__________.
[Ans. *] Range: 4.3 to 5.3*
V
B |
I
When V (i. e., when port 2 is short circuited)
I 2 2 I

V 5 V

V 7V
I
2 (5 2 ) 24
5 5V
I I
5 2 24
V 24
So, B 4.8
I 5

2. Two identical nMOS transistors and are connected as shown below. The circuit is
used as an amplifier with the input connected between G and S terminals and the output
taken between D and S terminals. V and V are so adjusted that both transistors are in
saturation. The trans conductance of this combination is defined as g while the

output resistance is r , where i current flowing into the drain of . Let


g ,g be me trans conductances and r , r be the output resistances of transistors
and respectively.

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 7


.
GATE-2018 ECE

S
Which of the following statements about estimates for g and r is correct?
(A) g g . g . r and r r r (B) g g g and r r r
(C) g g and r r ,g .r (D) g g . and r r
[Ans. C*]
i

i i

V
S

I I i
g g
V V V
To calculate :
I
V g V r

I V V

V V g V r I r

V I r
(V I xr )
I g V
r
V
I g r I I r r
r
r
V r [1 r g ]I
r
V
r r r r r g r r g
I

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 8


.
GATE-2018 ECE

3. Consider the following amplitude modulated signal:


s(t) cos(2 t) 4 cos(24 t) cos(28 t)
Tlie ratio (accurate to three decimal places) of the power of the message signal to the
power of the carrier signal is _________.
[Ans. 0.25] Range: 0.12 to 0.13*
s(t) cos(2 t) 4 cos(24 t) cos(28 t)
It can be compared with the standard form of the Am signal
s(t) cos,2 (f f )t- cos(2 f t) cos,2 (f f )t-
2 2
By comparison, we get, 4
1
2
2

2
2

(2) 1
.25
(4) 4

4. Let the input be u and the output be y of a system, and the other parameters are real
constants. Identify which among the following systems is not a linear system:
d y d y dy du d u
( ) a a a y b u b b (With initial rest conditions)
dt dt dt dt dt
( )
(B)y(t) ∫e u( )d

( ) y au b, b
( ) y au
[Ans. C*]
y au b, b is a non-linear System

5. The points P, Q and R shown on the Smith chart (normalized impedance chart) in the
following figure represent:

(A) P: Open Circuit. Q: Short Circuit, R: Matched Load


(B) P: Open Circuit, Q: Matched Load, R: Short Circuit

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 9


.
GATE-2018 ECE

(C) P: Short Circuit Q: Marched Load, R: Open Circuit


(D) P: Short Circuit. Q: Open Circuit, R: Matched Load
[Ans. C]
Smith chart is used to find reflection coefficient and VSWR of a Transmission line.
Z
ormalized impedance
Z
Z
jk
Z

,X Ve

1
2

,X ,X

( ,X )

,X Ve

t Z Short circuit
t Z Z atched oad
t Z pen ircuit

k 2k x
6. Consider matrix 0 1 and vector x 0x 1. The number of distinct real values
k k k
of k for which the equation x infinitely many solutions is_________.
[Ans. *] Range: 2 to 2
k 2k x
0 1 x 0x 1
k k k
x
s ‘x’ has infinitely many solutions
( ) 2 | |
k 2k (k k)
k (k 2 (k 1))
k , ,2
istinct values of k 2

7. A discrete-time all-pass system has two of its poles at 0.25 and 2 3 . Which one of the
following statements about the system is TRUE?
(A) It has two more poles at 0.5 3 and 4 .
(B) It is stable only when the impulse response is two-sided.
(C) It has constant phase response over all frequencies.
(D) It has constant phase response over die entire z-plane.
[Ans. B*]

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 10


.
GATE-2018 ECE

Img X
2

1
3
X e
.258

Unit ircle

The ROC should include unit circle to make the system stable. From the given pole pattern
it is clear that, to make the system stable, the ROC should be finite circular strip or finite
annular strip and hence the impulse response of the system should be also two-sided.

( )
8. Taylor series expansion of f(x) ∫ e dt around x = 0 has the form
f(x) a a x a x
The coefficient a (correct to two decimal places) k equal to________.
[Ans. *] Range: 0.01 to 0.01
f(x) a a x a x Taylor series rep

f(x) ∫e dt

et g(t) e expansion around to


g( ) 1

g (t) e ( t) g( )

g (t) ( 1)e e ( t ( t))


g ( ) 1
t
g(t) 1 ( 1) . ..
2
t t x
f(x) ∫ (1 . . . ) dt *t ...+ x . ..
2 6 6
x
f(x) x . .
6
omparing and
a

Method 2:
If f is continuous on (a, b) then

g(x) ∫ f(t)dt a x b

then g (x) f(x)


Where g (x) is continuous on (a, b) and differentiable on (a, b)

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 11


.
GATE-2018 ECE

f(x) ∫e dt

f (x) e
f (x) ( x)e
f ( )
a
2
Coefficient of x term in Taylor series

9. A traffic signal cycles from GREEN to YELLOW, YELLOW to RED and RED to GREEN. In
each cycle. GREEN is turned on for 70 seconds. YELLOW is turned on for 5 seconds and the
RED is turned on far 75 seconds. This traffic light has to be implemented using a finite
state machine (FSM). The only input to this. FSM is a clock of 5 second period. The
minimum number of flip-flops required TO implement this FSM is _________.
[Ans. *] Range: 5 to 5

G Y R

Turn on for 7 sec Turn on for 5 sec Turn on for 75 sec


Given a clock of 5 second period
To get 7 seconds counted number of numbers ‘t ‘ be
5 sec
To get 58 seconds 1 number
5 sec
75 sec
To get 75 seconds 15 number
5 sec
Total 14 1 15 3 numbers
We should design a counter with 30 states
Number of flip-flops=5
2 flipflop 2 4 states
3 flipflop 2 8 states
5 flipflop 2 32 states
n=5

10. Let x(t) be a periodic function with period T = 10. The Fourier series coefficients for this
series are denoted by a that is

X(t) ∑ a e

The same function x(t) can also be considered as a periodic function with period T 4 .
Let bk be the Fourier series coefficients when period is taken as T . I ∑ |a | 16,
the ∑ is equal to
(A) 256 (B) 64
(C) 16 (D) 4
[Ans. C*]

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 12


.
GATE-2018 ECE

Change in only time period or frequency does not change in the value of Fourier series
coefficients
So, b a

∑ |b | ∑ |a | 16

11. Consider a binary channel code in which each code word has a fixed length of 5 bits. The
Hamming distance between any pair of distinct code words in this code is at least 2. The
maximum number of code words such a code can contain is_________.
[Ans. *] Range: 16 to 16
Using singleton bound
k n d 1
Where
d inimum hamming distance between any oair of distinct codewords
n length of original codeword
k length of newly formed code word
k 5 2 1
k 4
Therefore, the maximum number of code words is 2 16

12. A good trans impedance amplifier has


(A) low input impedance and high output impedance,
(B) high input impedance and high output impedance.
(C) high input impedance and low output impedance.
(D) low input impedance and low output impedance.
[Ans. D]
A good trans-impedance amplifier should have low input impedance and low output
impedance.

13. Let M be a real 4 4 matrix. Consider the following statements:


S1: M has 4 linearly independent eigenvectors.
S2: M has 4 distinct eigenvalues.
S3: M is non-singular (invertible).
Which one among the following is TRUE?
(A) S1 implies S2 (B) S1 implies S3
(C) S2 implies S1 (D) S3 implies S2
[Ans. C]
For M 4 4 atrix, if M has 4 linearly independent eigen vectors, then M has 4 distinct
eigen vectors.
Option (C) is correct

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 13


.
GATE-2018 ECE

14. The Nyquist stability criterion and the Routh criterion both are powerful analysis took for
determining the stability of feedback controllers. Identify which of the following
statements is FALSE:
(A) Both the criteria provide information relative to the stable gain range of the system.
(B) The general shape of the Nyquist plot is readily obtained from the Bode magnitude
plot for all minimum-phase systems.
(C) The Routh criterion is not applicable in the condition of transport lag which can be
readily handled by the Nyquist criterion.
(D) The closed-loop frequency response for a unity feedback system cannot be obtained
from the Nyquist plot.
[Ans. D]

15. A p-n step junction diode with a contact potential of 0.65 V has a depletion width of I m at
equilibrium. The forward voltage (in volts, cancel to two decimal places) at which this
width reduces to 0.6 m is __________.
[Ans. *]Range: 0.40 to 0.43
No bias: V .65 W 1 m
Forward bias V =? W .6 m
W √(V V)
W V V .65 V
√ √
W V V .65

.6 .65 V

1 .65
.65 V
.36
.65
V .65(1 .36)
V .416 V

16. Let f(x, y) , where a and b are constants. If at c 1 and y 2, then the
relation between a and b s
b b
( )a (B) a
4 2
( ) a 2b ( )a 4b
[Ans. D]
ax by
(x, y)
xy
f 1 2ax(x) (ax by )
* +
x y x
1 2a(1)(1) (a 4b) a 4b
⁄ * +
(x 1, y 2) 2 1 2

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 14


.
GATE-2018 ECE

1 2by(y) (ax by )
⁄ * +
(x 1, y 2) x y

1 2b(2)(2) (a(1) b(4)) 4b a


* +
1 2 4
f
given ⁄
x (x 1, y 2)

a 4b ab a
2 4
2a 8b 4b a
3a 12b
a 4b

17. In the circuit shown below, the op-amp is ideal and Zener voltage of the diode is 2.5 volt-At
the input, unit step voltage is applied, i.e. V (t) u(t) volts. Also, at t = 0, the voltage
across each of the capacitors is zero.
1

1k 1
1V
V V (t)
t V (t)

The time t, in milliseconds, at which the output voltage V crosses 1 Vis


(A) 2.5 (B) 5
(C) 7.5 (D) 10
[Ans. C*]
or t
1
I
V 1 V
1k 2.5 V
1V
V (t) V
V (t)

1V
I 1m
1k
Till t = 2.5 msec, both V and V will increase and after t = 2.5 msec, V 2.5 V and
V increases with time.
When V (t) 1 V, V 7.5 V
1
So, ∫ (1m )dt 7.5 V
1
1 t 7.5 t 7.5 msec

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 15


.
GATE-2018 ECE

18. A binary source generates symbols X * 1,1+ which are transmitted over a noisy channel.
The probability of transmitting X = 1 is 0.5. Input to the threshold detector is R = X + N.
The probability density function f (n) of the noise N is shown below,
f (n)
.5

n
2 2
If the detection threshold is zero, then the probability of error (correct to two decimal
places) is ___________.
[Ans. *] Range: 0.12 to 0.14
( 1) (X 1) ( 1) (X 1)
X X
1 2
( ( 1) ( 1) ( 1) .125
2 2

19. The logic function f(X,Y) realized by the given circuit is


V

X X
Y Y
f(X, Y)

(A) NOR (B) AND


(C) NAND (D) XOR
[Ans. D*]
From pull-down network,
̅̅̅̅̅̅̅̅
f(X, Y) X ̅Y
̅ XY X Y
f(X, Y) ̅̅̅̅̅̅̅̅
X Y X Y

20. There are two photolithography systems: one with light source of wavelength 156
nm (System 1) and another with light source of wavelength 325 nm (System 2). Both
photolithography systems are otherwise identical. If the minimum feature sizes that can
be realized using System 1! and System 2 are and respectively, the ratio
(correct to two decimal places) is_________.
[Ans. *] Range: 0.47 to 0.51
In the concept of photolithographic systems, minimum feature size wave length

156
.48
325

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 16


.
GATE-2018 ECE

21. A function ( , B, ) defined by three Boolean variables A. Band C when expressed as sum
of products is given by ̅ B ̅ ̅ ̅ B ̅ B ̅ where. ̅ , B
̅, and ̅ are the
complements of the respective variables. The product of sums (POS) form of the function F
is__________.
(A) ( B ). ( ̅
B ) (̅ B )
(B) (̅ B ̅ ̅ ). (̅ B ̅ ) ( ̅ ̅)
B
(C) ( B ). ( ̅ ̅ ) (̅ B ̅ ) (̅ B
B ̅ ) (̅ B ̅ ̅)
(D) ( ̅ ̅
B ). ( ̅ B ) ( ̅
B ) ( B ̅ ) ( B )
[Ans. C]
( , B, ) ∑m( ,2,4)
( , B, ) (1,3,5,6,7)
( B ̅ )( ̅ ̅ )(̅ B ̅ )(̅ B
B ̅ )(̅ B̅ ̅)

22. A lossy transmission line has resistance per unit length . 5 m.The line is distortion
less and has characteristic impedance of 50 . The attenuation constant (in Np/m, correct
to three decimal places) of the line is__________.
[Ans. *] Range: 0.001 to 0.001
Resistance . 5 m
Z 5
. 1 m
z

s √ Z √

23. In a p-n junction diode at equilibrium, which one of the following statements is NOT TRUE?
(A) The hole and electron diffusion current components are in the same direction.
(B) The hole and electron drift content components are in the same direction,
(C) On an average, holes and elections drift in opposite direction.
(D) On an average, electrons drift and diffuse in the same direction.
[Ans. D]
Option (D) is incorrect as draft of electronics is based on applied electric field whereas
diffusion of electrons depend on concentration grandniece.

24. Consider p(s) s a s a s a with all real coefficients. It is known that its
derivative p’(s) has no real roots. The number of real roots of p(s) is
(A) 0 (B) 1
(C) 2 (D) 3
[Ans. B]
(s) s a s a s a
f(x)

If two or more real roots exist for f(s), then p’(s) will at least have ‘1’ real root( (s) )
: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 17
.
GATE-2018 ECE

Real roots of P(s) is 1


Number of real roots = 1, As in cubic polynominal, there exists at least one real root
Option (B) s correct.

25. Let X , X , X and X be independent normal random variables with zero mean and unit
variance. The probability that X is the smallest among the four is_________.
[Ans. *] 0.25 to 0.25
3 1
(X is smallest) .25
4 4

Q.26 - Q.55 Carry Two Mark each.


26. The cutoff frequency of TE mode of an air filled rectangular waveguide having inner
dimensions a cm X b cm (a b) is twice that of the dominant TE mode. When the
waveguide is operated at a frequency which is 25% higher than the cutoff frequency of the
dominant mode, the guide wavelength is found to be 4 cm. The value of b (in cm. correct to
two decanal places) is__________.
[Ans. *]Range: 0.7 to 0.8
Given f ( , ) 2f ( )

c m n
f ( , ) √. / . /
2 a b
c
f( , )
2b
c c
2 0 1 a 2b
2b 2a
s a b TE is dominant mode
iven 4 cm

cos
√1 . /
5
iven f f
4
f 4
f 5

√1 . /
. /
4 3 c
5 f
c c c 8a
f f 5
12 8a
5 5
3
a
2

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 18


.
GATE-2018 ECE

a 3
b
2 4
b .75 cm

27. A band limited low-pass signal x(t) of bandwidth 5 kHz is sampled at a sampling rate f .
The signal x(t) is reconstructed using the reconstruction filter H(f) whose magnitude
response is shown below:
| (f)|

f (k z)
8 6 6 8 S
W W W W W
The minimum sampling rate f (in kHz} for perfect reconstruction of x(t) is_________.
X *] XRange: 13 to
[Ans. X 13 X X
S V V V
Continuous time signal x(t) band limited to 5 kHz
S
To reconstruct U
a Continuous times signal sampling frequency f
f f
f f f
f 8k z
f 5k z
f f 5
8 f 5
f 13 k z

28. A 2 2 ROM array is built with the help of diodes as shown in the circuit below. Here W0
and W1 are signals that select the word lines and B0 and B1 are signals that are output of
the sense amps based on the stored data corresponding to the bit lines during the read
operation.
B B1
Sense mps
W

W1
V

B B
W
[ ]
W
Bits stored in the Rom Array

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 19


.
GATE-2018 ECE

During the read operation, the selected word line goes high and the other word line is in a
high impedance stare. As per the implementation shown in the circuit diagram above,
what are the bits corresponding to (where i — 0 or 1 andj — 0 or 1) stored in the
ROM?
1 1
(A) 0 1 (B) 0 1
1 1
1 1 1
(C) 0 1 (D) 0 1
1
[Ans. A]
B B1
Sense mps
W

W1
V

 When, W V ,B V otherwise B
 When W V ,B V otherwise B
So, B W and B W
B B
ence, W 1
0 1
W 1

29. Let r x y z and z xy yz y 1. Assume that x and y are independent


variables. At (x, y, x) (2, 1,1) the value (correct to two decimal places) of is
[Ans. *] Range: 4.4 to 4.6
iven r x y z
z xy yz y 1
pply partial derivative on wrt x
z z
3z y y
x x
z y
x 3z y
z 1 1
|
x ( , , ) 3(1) 1 2
pply partial derivative wrt on
r z
2x
x x
z 1
| 2(2) ( ) 4.5
x( , , ) 2

30. Red (R). Green (G) and Blue (B) Light Emitting Diodes (LEDs) were fabricated using p-n
junctions of three different inorganic semiconductors having different hand-gaps. The

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 20


.
GATE-2018 ECE

built-in voltages of red. green and blue diodes are V . V and V . respectively. Assume
donor and acceptor doping to be the same ( and . respectively) in the p and n sides of
all the three diodes. Which one of the following relationships about the built-in voltages is
TRUE?
(A) V V V (B) V V V
(C) V V V (D) V V V
[Ans. B*]

1
Energy gap, E
So, E E E
Materials with high energy gap will have built in voltages, when doping concentrations are
same.
So, V V V

31. Let c(t) cos(2 f t) and m(t) cos(2 f t). It is given that f 5f . The signal
c(t) , m(t) isapplied to the input of a non-linear device, whose output V (t) isrelatedto the
input V (t)as V (t) aV (t) bV , where a and b are positive constants. The output of the
non-linear device is passed through an ideal band-pass filter with center frequency f and
bandwidth 3f , to produce an amplitude modulated (AM) wave. If it desired to have the
sideband power of the AM wave to be half of the earlier power, then a/b is
(A) 0.25 (B) 0.5
(C) 1 (D) 2
[Ans. D]
v (t) av (t) bv (t)
a( cos(2 f t) cos(2 f t)) b ( cos(2 f t) cos(2 f t) )
The output of BPF is given by
2b
y (t) a [1 cos(2 f t)] cos(2 f t)
a
Given sideband power is half of the carrier power

1
2 2
2b a
1 2
a b

32. The figure below shows the Bode magnitude and phase plots of a stable transfer function
n
(s)
s d s d s d

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 21


.
GATE-2018 ECE

(dB)
| (j )|

36 dB
2 dB
dB

(j )

18

21

∑ k (s)

Consider the negative unity feedback configuration with gain k in the feed forward path.
The closed loop is stable for k k . The maximum value of k is
[Ans. *] Range: 0.1 to 0.1
n
(s)
s d s d s d
(s) (s)
k (s)

From diagram
| (j ) (j )| 2 dB
a
| (j )| k (j )
To the closed loop system to be stable
ain margin 1
1
1
| (j ) (j )|
| (j )| 1 or log(1) dB
2 log k 2 log k dB
2 log k 2 dB
log k 1
Hence maximum value of k is k for when is stable
k k 1 .1

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 22


.
GATE-2018 ECE

33. An op-amp based circuit is implemented as shown below.


31 k

1k 15V

1V V
15V

In the above circuit, assume the op-amp to be ideal. The voltage (in volts, correct to one
decimal place) at node A. connected to the negative input of the op-amp as indicated in the
figure is___________.
[Ans. *] Range: 0.4 to 0.6
Applying the concept of virtual ground, we get
V V , non inverting amplifier-
31k
V 1V
1k
V 31 V 15V
Which is not possible
Hence. The output voltage of the op-amp is equal to 15V
31 k

1k 15V

1V V 15V
15V

ow applying of node ‘ ’, we get


V ( 15) V 1
31 k 1k
V V 15 1
31k 1k 31 k 1k
1 1 15
V [ ] 1
31 1 31
V .5V

34. For a unity feedback control system with the forward path transfer function
(s)
s(s 2)
The peak resonant magnitude of the closed-loop frequency response is 2.
The corresponding value of the gain K (correct to two decimal places) is
[Ans. *] Range: 14 to 17
k
(s)
s(s 2)

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 23


.
GATE-2018 ECE

Standard G(s) of 2nd order system

(s)
s(s 2 )
√k . .
2 2
1

1
esonant peak
2 √1
2
1
2
2 √1
1
4
. 667, .92
√ . 667 .258
1
3.875
k (3. 75) 15. 2

35. For the circuit given in the figure, the voltage V (in volts) across the capacitor is
1 k

~ 5 sin(5t)V 1 V

1 k
(A) 1.25 √2 sin ,5t .25 - (B) 1.25 √2 sin ,5t .125
(C) 2.5 √2 sin ,5t .25 - (D) 2.5√2 sin ,5t .125 ]
[Ans. C*]
1 1
2
5 1
2 k

~ 5 sin(5t) V
j2 k V

5 5 1 9
V ( j2 )V V
2 j2 √2 45
5
45 V 2.5√2 sin .5t /V
√2 4
2.5√2sin (5t .25 ) V

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 24


.
GATE-2018 ECE

36. A dc current of 26 flows through the circuit shown. The diode in the circuit is fonvard
biased and it has an ideality factor of one. At the quiescent point, the diode has a junction
capacitance of 0.5 nF , Its neutral region resistances can be neglected. Assume that the
room temperature thermal equivalent voltage is 26 mV.

5 sin( t)mV
~ 1
V

For 2 1 rad/s . the amplitude of the small-signal component of diode current (in
A, correct to one decimal place) is_________.
[Ans. *] Range: 6.2 to 6.6*
The small signal equivalent model of the given circuit can be drawn as shown below.

i(t)

r 1
5 sin( t) mV
~
iven that, 2 1 rad sec
.5 n
I 26
V 26 mV
1
V 26 mV
So, r 1k
I 26
1 1
1k
2 1 .5 1
So, total impedance of the circuit will be
1
Z (r ) 1
j
1 (1 ) ( j1 ) j(1 j)
(r ) k
j 1 j1 2
1
(1 j)k (5 j5 )
2
Z 6 j5
|Z| 1 √36 25 1 √61
V 5 mV 5
I 6.4
|Z| 1 √61 √61

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 25


.
GATE-2018 ECE

37. Consider a white Gaussian noise process N(t) with two-sided power spectral density
S (f) .5 W/Hz as input to a filter with impulse response .5e (where t is in
seconds) resulting in output Y(t). The power in Y(t) in watts is
(A) 0.11 (B) 0.22
(C) 0.33 (D) 0.44
[Ans. B]
utput power rea under ouput power spectral density
utput power spectral density S (f)| (f)|

utput power ∫ e df .22
8

38. A random variable X takes values .5 and 0.5 with probabilities and respectively.
The noisy observation of X is Y = X + Z. where 2 has uniform probability density over the
̂ as
interval ( 1,1). X and Z are independent. If the MAP rule based detector outputs X
̂ 2 .5 Y
X
.5 Y
then the value of a (accurate to two decimal places) is___________.
[Ans. *] Range: . . *
1
( )
4
f (z)

1 2

1 1 z
3
( )
4
x
criteria, f (y|x ) (x ) f (y|x ) (x )
x
So, .5
1 3 3
1 1 1 f f ((y|x1 ) ( )
f ((y|x ) ( ) 2 4 8
2 4 8

1.5 1 .5 .5 1 1.5 y

Optimum threshold exists here

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 26


.
GATE-2018 ECE

39. The logic gates shown in the digital circuit below use strong pull-down 11MOS transistors
for LOW logic level art the outputs. When the pull-downs are off. high-value resistors set
the output logic levels to HIGH (i.e. the pull-ups are weak). Note That some nodes are
intentionally shorted to implement “wired logic”. Such shorted nodes will be I only if
the outputs of all the gates whose outputs are shorted are HIGH.
X

X
f(x)
X

The number of distinct values of X X X X (out of the 16 possible values) that give Y = 1
is __________.
[Ans. *] Range: 8 to 8
X X X X⏟

If X , then band on X
if X output is
X 1 output is
So only 8 inputs

40. In the circuit shown below, a positive edge-Triggered D Flip-Flop is used for sampling
input data using clock CK. The XOR gate outputs 3.3 volts for logic HIGH and 0 volts for
logic LOW levels. The data bit and clock periods ate equal and the value of T = 0.15.
where the parameters T and T are shown in the figure. Assume that the Flip-Flop and
the XOR gate are ideal.

D Flip-Flop
CLK

T T T
If the probability of input data bit ( ) transition in each clock period is 0.3. The average
value (in volts, accurate to two decimal places) of the voltage at node X, is _____________.
[Ans. *] Range: 0.82 to 0.86*

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 27


.
GATE-2018 ECE

T T T When input is changed


during clock period
3.3 V
(with probability 0.3)
V
When input is not changed
V during clock period (with
probability 0.7)
T
V ( ) [ .3 3.3 (1 )] , .7 -V
T
.3 3.3 (1 .15)V
.3 3.3 .85 V .8415V

41. The input 4 sinc (2t) is fed to a Hilbert transformer to obtain y(t) as shown hi the figure
below:
Hilbert
4sinc (2t) y(t)
Transform
( )
Here sinc(x) The value (accurate to two decimal places) of ∫ |y(t)| dt is ____.
[Ans. *] Range: 8 to 8
x(t) 4 sinc (2t)
x(t) 4 Sa (2 t)
y(t) ilbert transform of x(t)
y(t) x̂ (t)
Energy of x(t)=Energy of Hilbert transform of x(t)
x(t) E Energy of x(t)
x(t) 4 Sa (2 t)
2
t .T
Sa ( )
2

2 2
x( )
2
4 .T

2 2
1 2 2

1
1 ∫ |y(t)| ∫ (2) d
2

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 28


.
GATE-2018 ECE

4
(2 ( 2 ))
2
4 4
8
2

42. The position of a particle y(f) is described by the differential equation:


d y dy 5y
dt dt 4
The initial conditions are y( ) 1 and | . The position (accurate to two decimal
places) of the particle at t is__________.
[Ans. *] Range: . .
d y dy 5y
dt dt 4
d d
,
dt dt
5
( )y
4
.S . I
Complete solution is complementary function auxiliary equation
5
4
1 √1 4
2
1 2j 1
j
2 2
. e ( cos 1t sin 1(t))
.S y e ( cos t sin t)
iven y( ) 1
1
1
dy 1
e ( ) (cos t sin t) e ( sin t cos t)
dt 2
1
(1) ( )
2
1
2
1
y e (cot sin t)
2
y
e ( 1 )
at x
e .2 7

43. A uniform plane uniform plane wave traveling in free space and having the electric field
⃗E (√2â â ) cos[6√3 1 t 2 (x √2z)] V m

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 29


.
GATE-2018 ECE

is incident on a dielectric medium (relative permittivity > 1. relative permeability-1) as


shown in the figure and there is no reflected wave.
z
ree space
ielectric
Medium ( 1)

The relative permittivity (correct to two decimal places) of the dielectric medium is_______.
[Ans. *] Range: 1.9 to 2.1
z
ree space

√3 x
√2

√2
sin
√3
At zero reflection

tan √ 54.73

tan(54.73) √

√ √2
(1)
2
44. Let X,k- k 1, k 7 be 8-point DFT of a sequence x[n] where X[k] ∑ x,n- e

The value ( orrect to two decimal places)of ∑ x,2n- is _________

[Ans. *] Range: 2.90 to 3.10

∑ x(2n) x( ) x(2) x(4) x(6)

x(k) k 1 for k 7
x( ) 1
x(1) 2
x(2) 3
x(3) 4
x(4) 5
x(5) 6
x(6) 7
: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 30
.
GATE-2018 ECE

x(7) 8

x(k) ∑ x(n) e k

x( ) ∑ x(n) x( ) x(1) x(2) x(3) x(4) x(5) x(6) x(7)

We know that

x( ) ∑ x(n)( 1)
2

x(4) ∑ x(n)( 1)

x( ) x(1) x(2) x(3) x(4) x(5) x(6) x(7)


Sum of and
x(0)+x(4)=2((x(0)+x(2)+x(4)+x(6))
x( ) x(4)
∑ x(en)
2

1 5
∑ x(n) 3
2

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 31


.
GATE-2018 ECE

45. The contour C given below is on the complex plane z x jy, where√ 1 j
y

1 1
X X x

1 dz
The value of the integral ∮ dz is ________
j z 1
[Ans. *] Range: 2 to 2
y

1 1
X X x

1 dz
∮ dz
j z 1
1 dz

j (z 1)(z 1)
11 dz dz
*∮ ∮ +
2 j z 1 z 1
1 dz dz
*∮ ( 1) ∮ +
2 j z 1 z 1
1
,2 j 2 j- 2
2 j

*∮ f(z)dz ∮ f(z)dz+

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 32


.
GATE-2018 ECE

46. Consider the network shown below with 1 , 2 and 3 . The network is
connected to a constant voltage source of 11V.

11 V

The magnitude of the current (in amperes, accurate 10 two decimal places) through the
source is _______.
[Ans. *]Range: 7.9 to 8.1*

11 V

As the network is symmetric,


V V and V V
So, current through resistors is zero and as V V and V V , electrically the circuit
can be reduced as,

I I

11 V 11 V

Total resistances, 2( ) ( ) ( ‖ )
2 2
iven that 1 and 3
1 3 3 2 11
So, 1 ( ‖ ) 1
2 2 4 8
11V 11
I 8
(11⁄8)

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 33


.
GATE-2018 ECE

47. For the circuit given in the figure, the magnitude of the loop current (in amperes, correct
to three decimal places) 0.5 second after closing the switch is__________.
1V 1

1 1

[Ans. *]Range: 0.284 to 0.348


1
oop current, i(t) (1 e ) t
1 1
1 1
sec
1 1 2
1
i(t) (1 e ) t
2
1
at t .5 sec, i(t) (1 e ) .316
2

48. A four-variable Boolean function is realized using 4 x I multiplexers a s shown in the


figure.
I I
4 1
I I
V UX
I I f(x, y)

I S S I S S

round U V round W X
The minimized expression for F(U, V, W,X) is
(A) (UV U ̅V̅)W
̅ (B) (UV ̅V
U ̅)(W
̅X̅ ̅ X)
W
̅ U
(C) (UV ̅ V)W
̅ ̅
(D) (UV ̅ V)(W
U ̅X̅ ̅ X)
W
[Ans. C]
Let output of first MUX is z
Thus (u, v, w, x) w ̅ x̅(z) w ̅ (z)
z u̅v(1) uv̅
w
̅ z(x̅ x) w ̅z w ̅ (u̅v uv̅)

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 34


.
GATE-2018 ECE

49. In the circuit shown below, the (W/L) value for is twice that for . The two nMOS
transistors are otherwise identical. The threshold voltage V for both transistors is 1.0V.
Note that V for must be > 1.0 V.
3.3 V

2. V

Current through the nMOS transistors can be modeled as


W 1
I ( ) ((V V )V V ) for V V V
2
W
I ( ) (V V ) ⁄2 for V V V
The voltage (in volts, accurate the two decimal places) at V is ________.
[Ans. *] Range: 0.41 to 0.435
3.3 V

2. V

S
V

:
V 3.3 V V 2V
V 2 V V V
V 1 ( iven)
V 1

V V V V V V
3.3 V 2 V 1 V 2 1
V V V sV 1
Saturation region V V V
Linear region
(sat)I I ( inear)
I ( ) I ( )
(V V ) V
n cox . / [ ], cox 0 1 *(V V )V +
2 2

0 1 20 1

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 35


.
GATE-2018 ECE

(V V ) V
2 (V V )V
2 2
V
(2 V 1) (1)(V x)
2
V
V 1 2V x V
2
3V
3V 1
2
3V 6V 2
6 √36 4(3)(2) 2√3 1
V 1 1
2(3) 2(3) √3
1
sV 1 V x 1 .423 V
√3

50. A curve passes through the point (x 1, y ) and satisfies the differential equation
. The equation that describes the curve is
y 1 y
( ) ln (1 ) x 1 (B) ln (1 ) x 1
x 2 x
y 1 y
( ) ln .1 / x 1 ( ) ln .1 / x 1
x 2 x
[Ans. A]
dy x y y
dx 2y x
ption ( )
y
ln (1 ) x 1
x
1 2yy (x ) y (2x)
* + 1
.1 / (x )

x 2y x y 2y x
1
(x y ) x x
2y x y 2y x x (x y )
dy x y y
dx 2y 2
ption ( )Satisfies

51. A junction is made between p Si with doping density 1 cm andp Si with


doping density 1 cm .
Given: Boltzmann constant k 1.38 1 , electronic charge q 1.6 1 .
Assume 100 % acceptor ionization.
At room temperature (T 3 ), the magnitude of the built in potential (In volts, correct
to two decimal places) across this junction will be _________.

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 36


.
GATE-2018 ECE

[Ans. *]Range: 0.11 to 0.13

1 1
e
Built in potential
V V ln ( )

1
V ln ( )
1
.259 ln(1 ) .119
V .12 V

52. The state equation and the output equation of a control system are given below
4 1.5 2
ẋ 0 1x 0 1u
4
y ,1.5 .625-x
The transfer function representation of the system is
3s 5 3s 1.875
( ) (B)
s 4s 6 s 4s 6
4s 1.5 6s 5
( ) ( )
s 4s 6 s 4s 6
[Ans. A]
Transfer function = ,SI - .B
(SI ) 0S 1 0
4 1.5
1
S 4
(SI ) 0S 4 1.5
1
4 S
S 4
of ,SI - 0 1
1.5 S 4
S 1.5
di(SI ) 0 1
4 S 4
dj(SI ) 1 S 1.5
(SI ) 0 1
,SI - S 4s 6 4 S 4
1
,SI - B 0S 1.5 2
10 1
4 S 4 (S 4S 6)
2S 1
(SI ) B 0 1
8 (S 4S 6)
2S 1
,SI - B ,1.5 .625- 0 1
8 (S 4S 6)
3S 5
T
S 4S 6

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 37


.
GATE-2018 ECE

53. A solar cell of area 1. cm . operating at 1.0 sun intensity, has a short circuit current of 20
mA and an open circuit voltage of 0.65 V. Assuming room temperature operation and
thermal equivalent voltage of 25mV, the open circuit voltage (in volts, correct to two
decimal places) at 0.2 sun intensity is__________.
[Ans. *]Range: 0.59 to 0.63
For solar cell, short circuit current is the maximum current when load is zero
I intensity
I .2 1
I 1 5

I I e V pen circuit voltage


I
e
I
I
V ln ( ) V V
I
I
V V V ln ( )
I
1
V .65 V ln ( )
5
V .61V

54. The circuit shown in the figure is used to provide regulated voltage (5 V) across the 1k
resistor. Assume that the Zener diode has a constant reverse breakdown voltage for a
current range, smiling from a minimum required Zener current. I 2 m to its
maximum allowable current. The input voltage V may vary by 5% from its nominal value
of 6 V. The resistance of the diode in the breakdown region is negligible.

5V 1k
V

The value of R and the minimum required power dissipation raring of the diode respectively,
are
(A) 186 and 10 mW (B) 100 and 40 mW
(C) 100 and 10 mW (D) 186 and 40 mW
[Ans. B*]
V 6V 5 6V .3V 5.7 V to 6.3 V
5V
I 5m
1k
I ( ) I I ( ) 5m 2m 7m
V V
I
V( ) V
I ( ) 7m

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 38


.
GATE-2018 ECE

5.7 5 7
So, k 1
7 7
6.3 5
W en, 1 ,I ( ) 13 m
1
I ( ) I ( ) I 13 m 5m 8m
( ) VI ( ) (5 8)mW 4 mW

55. The distance (in meters) a wave has to propagate in a medium having a skin depth of 0.1
m so that the amplitude of the wave attenuates by 20 dB is
(A) 0.12 (B) 0.23
(C) 0.46 (D) 2.5
[Ans. B]
E(x) E E
tx (Skill depth )
E E e
1
1 1

E(x) E e
E (dB) E (dB) 2
2 log E 2 logE 2
E
2 log ( ) 2
E
E
E E e
1
e 1
x 8 ln(1 )
x .1 ln(1 )
x .23 m

E (dB)
E (dB)

(e E ) )
dB

skin depth

: 080-617 66 222, info@thegateacademy.com ©Copyright reserved. Web:www.thegateacademy.com 39

Você também pode gostar