3900 Series Base Station

V100R011C00
eNodeBFunction Parameter
Reference
Issue 01

Date 2015/09/28

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei
Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of
products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherw
specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties
guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this documen
ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty
any kind, express or implied.

Huawei Technologies Co., Ltd.

Huawei Industrial Base
Bantian, Longgang
Address:
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
 rights reserved.
any form or by any means without prior written consent of Huawei

Technologies Co., Ltd.

ed in this document are the property of their respective holders.

by the contract made between Huawei and the customer. All or part of the
ay not be within the purchase scope or the usage scope. Unless otherwise
mmendations in this document are provided "AS IS" without warranties,
mplied.

notice. Every effort has been made in the preparation of this document to
on, and recommendations in this document do not constitute a warranty of
Purpose

This document describes the MO parameters of eNodeB For the details about the paramete
interconnection, see the BTS3900 Parameter List.

Intended Audience
This document is intended for:
• Network planners
• System engineers
• Field engineers
• Shift operators
• Site maintainers
• Network operators

Parameter Attribute Description

The following table describes the attributes of each parameter.
Parameter Attribute
MO
Parameter ID
Parameter Name

NE

MML Command

Meaning

IsKey
Mandatory
Dynamic Attribute
Feature ID
Feature Name

Value Type

GUI Value Range

Enumeration Number/Bit

Unit
Actual Value Range

Default Value

Recommended Value
Initial Value Source

Impact
Parameter Relationship

Access

Service Interrupted After Modification

Interruption Scope
Interruption Duration (min)
Caution

Validation of Modification

Impact on Radio Network

Performance
Introduced in Version…
Attribute
 Applicable Mode

Change History
For detailed parameter changes, see the release notes.

Issue Date
01 2015/9/28
Draft A 2015/7/30
he MO parameters of eNodeB For the details about the parameters related to northbound interface
TS3900 Parameter List.

scription
es the attributes of each parameter.
Description
Managed object of NE.
A simple character string used for identifying a parameter.
Name of a parameter.
NE Type of a product displayed on the OSS. The value can be BTS3900, BTS3900 WCDMA, or
BTS3900 LTE. BTS3900 indicates a co-MPT base station; BTS3900 WCDMA indicates a UMTS
base station; BTS3900 LTE indicates an LTE base station. These NE types are applicable to the
following base station models: DBS3900, BTS3900, BTS3900A, BTS3900L, BTS3900AL, and
BTS3900C.
Man Machine Language (MML) command related to the parameter.
Function of a parameter, protocol that defines the parameter, whether the parameter is an
advanced parameter.
Advanced parameters are not configured through northbound interfaces. To modify these
parameters, contact Huawei Customer Service Center for technical support.
If parameters meet one of the following conditions, they are treated as advanced parameters:
1. Parameters are temporarily introduced in a new feature or a customized feature to achieve
optimal network performance.
These parameters will have fixed values and will be deleted after the beta test or test at the
customized site.
2. Modifications to these parameters have a great impact on network KPIs or performance.
Normally, modifications of these parameters are not required for features. To achieve optimal
network performance, multiple parameters must be modified because modification of a single
parameter has little effect on the network and even may cause accidents, for example, service
interruption.

Whether the parameter is used to identify an MO instance.

Whether the parameter is mandatory for creating an MO instance.
Whether the parameter is dynamic for an MO. If the parameter is not dynamic, it can be added,
modified, or removed; if the parameter is dynamic, it cannot.
ID of the feature that uses the parameter.
Name of the feature that uses the parameter.
Type of a parameter value. For example, IP Address Type, Compound Type, Enumeration Type,
Interval Type, Bit Field Type, Character String Type, Wildcard Mask Type, Subnet Mask Type,
Password Type, Any Type, BCD Number Type, Struct.
Range of the parameter values displayed on the GUI.
Enumeration number corresponding to the GUI value of a parameter of the enumeration type, or
bit position corresponding to the GUI value of a parameter of the bit field type. N/A is filled if the
parameter value is not enumeration type or bit field type.
Note: For a parameter of the bit field type, bit position lists only the bits in use. Bits not in use are
set to 0 and not described in this document.

Unit of a parameter value displayed on the GUI.

Range of the actual values corresponding to the parameter values displayed on the GUI.
Initial value assigned by the system for a parameter. None indicates that no default value is
available.
For a mandatory parameter, no default value is available.
Generally, it is displayed on the configuration window of an ADD command but not displayed on
the configuration window of a MOD/RMV/DSP/LST/SET command.
Note:
For bit field type parameters, sub-parameter:On (the corresponding bit is set to 1) indicates that
the sub-parameter is selected in the check box on the configuration window. In this case, the
corresponding switch will be turned on, the corresponding object will be selected, or the
corresponding operation will be performed; sub-parameter:Off (the corresponding bit is set to 0)
indicates that the sub-parameter is deselected in the check box on the configuration window. In
this case, the corresponding switch will be turned off, the corresponding object will be deselected,
or the corresponding operation will not be performed.

Parameter values recommended for different scenarios. None indicates that no default value is
available.
Note:
For bit field type parameters, sub-parameter:On (the corresponding bit is set to 1) indicates that
the sub-parameter is selected in the check box on the configuration window. In this case, the
corresponding switch will be turned on, the corresponding object will be selected, or the
corresponding operation will be performed; sub-parameter:Off (the corresponding bit is set to 0)
indicates that the sub-parameter is deselected in the check box on the configuration window. In
this case, the corresponding switch will be turned off, the corresponding object will be deselected,
or the corresponding operation will not be performed.
Source for the initial configuration of a parameter. The initial value source can be:
Radio planning (Internal planning): The parameter value comes from the radio network plan,
facilitating resource management on the NE.
Radio planning (Negotiation with the peer): The parameter value comes from the radio network
plan. The NE negotiates this value with the peer device to ensure successful interworking.
Transport planning (Internal planning): The parameter value comes from the transport network
plan, facilitating resource management on the NE.
Transport planning (Negotiation with the peer): The parameter value comes from the transport
network plan. The NE negotiates this value with the peer device to ensure successful
interworking.
Equipment planning: The parameter value comes from the equipment plan.
Engineering design: The parameter value comes from the algorithm or function design.
Default/recommended value: The parameter value uses the default or recommended value,
where the recommended value is preferential. The default/recommended value can be used in
most scenarios and adjusted for a specific scenario.
N/A: The parameter value is not required.
Parameter impact scope.
Relationship with other parameters. For example, to use this parameter, you need to set related
Whether a parameter has one of the following properties:
Read/Write: The parameter can be added, deleted, or modified.
Read Only: The parameter can be added or deleted only.
Whether the parameter modification interrupts the ongoing services. One of the following
comments is provided:
Yes: The modification interrupts the ongoing services.
No (And no impact on the UE in idle mode): The modification does not interrupt the ongoing
services, and has no impact on the network access of UEs in idle mode.
No (For the UE in idle mode, ...): The modification does not interrupt the ongoing services, but
affects network access of UEs in idle mode...
N/A: This comment is used when a parameter cannot be modified.

Possible interruption scope.

Possible interruption duration (unit: minute).
Cautions to be taken during the modification.
How this parameter takes effect and whether the equipment needs to be restarted after the
modification. The parameter modification does not impact the equipment means that the
parameter takes effect immediately after the modification.
Impact of the parameter on radio network performance.

Product version in which the parameter is introduced.

Whether the parameter is a radio parameter, a transport parameter, or an equipment parameter.
 Indicates the applicable mode of a parameter.
G:The parameter is valid for GSM mode.
U:The parameter is valid for UMTS mode.
L:The parameter is valid for LTE mode.
If the parameter is applicable to multiple modes, the modes are separated by commas. For
example, if the parameter is applicable to GSM and UMTS, the value is G,U.
If a parameter not applicable to a mode is used, the services of the mode will not be affected
irrespective of whether the parameter setting is successful.

nges, see the release notes.

Description
This is the first official release.
Draft A.
rameters related to northbound interface

parameter.

e value can be BTS3900, BTS3900 WCDMA, or

ase station; BTS3900 WCDMA indicates a UMTS
ase station. These NE types are applicable to the
900, BTS3900A, BTS3900L, BTS3900AL, and

ed to the parameter.
he parameter, whether the parameter is an

gh northbound interfaces. To modify these

Center for technical support.
ns, they are treated as advanced parameters:
ew feature or a customized feature to achieve

ll be deleted after the beta test or test at the

eat impact on network KPIs or performance.

e not required for features. To achieve optimal
t be modified because modification of a single
ven may cause accidents, for example, service

O instance.
g an MO instance.
 f the parameter is not dynamic, it can be added,
mic, it cannot.

dress Type, Compound Type, Enumeration Type,

ype, Wildcard Mask Type, Subnet Mask Type,
Struct.
e GUI.
value of a parameter of the enumeration type, or
parameter of the bit field type. N/A is filled if the
ield type.
osition lists only the bits in use. Bits not in use are

.
e parameter values displayed on the GUI.
meter. None indicates that no default value is

available.
indow of an ADD command but not displayed on
LST/SET command.

On (the corresponding bit is set to 1) indicates that

on the configuration window. In this case, the
esponding object will be selected, or the
b-parameter:Off (the corresponding bit is set to 0)
n the check box on the configuration window. In
ed off, the corresponding object will be deselected,
rmed.

cenarios. None indicates that no default value is

On (the corresponding bit is set to 1) indicates that

on the configuration window. In this case, the
esponding object will be selected, or the
b-parameter:Off (the corresponding bit is set to 0)
n the check box on the configuration window. In
ed off, the corresponding object will be deselected,
rmed.
er. The initial value source can be:
meter value comes from the radio network plan,

The parameter value comes from the radio network

r device to ensure successful interworking.
parameter value comes from the transport network
NE.
er): The parameter value comes from the transport
h the peer device to ensure successful

mes from the equipment plan.

mes from the algorithm or function design.
value uses the default or recommended value,
The default/recommended value can be used in
ario.

e, to use this parameter, you need to set related

properties:
ted, or modified.
eted only.
he ongoing services. One of the following

rvices.
The modification does not interrupt the ongoing
cess of UEs in idle mode.
ation does not interrupt the ongoing services, but

cannot be modified.

e equipment needs to be restarted after the

es not impact the equipment means that the
odification.
rmance.

duced.
transport parameter, or an equipment parameter.
, the modes are separated by commas. For
and UMTS, the value is G,U.
, the services of the mode will not be affected
successful.
 MO Parameter ID Parameter Name NE MML Command

ADD
CNOPERATOREXT
ENDEDQCI
LST
CNOPERATOREXT
CnOperatorExtende BTS3900, BTS3900 ENDEDQCI
CnOperatorId CN Operator ID
dQci LTE MOD
CNOPERATOREXT
ENDEDQCI
RMV
CNOPERATOREXT
ENDEDQCI

ADD
CNOPERATOREXT
ENDEDQCI
LST
CNOPERATOREXT
CnOperatorExtende CN Operator BTS3900, BTS3900 ENDEDQCI
ExtendedQci
dQci extended QCI LTE MOD
CNOPERATOREXT
ENDEDQCI
RMV
CNOPERATOREXT
ENDEDQCI

ADD
CNOPERATOREXT
ENDEDQCI
Service-based inter- MOD
CnOperatorExtende ServiceIrHoCfgGro BTS3900, BTS3900
RAT handover CNOPERATOREXT
dQci upId LTE
policy group ID ENDEDQCI
LST
CNOPERATOREXT
ENDEDQCI

ADD
CNOPERATOREXT
ENDEDQCI
Service-based inter- MOD
CnOperatorExtende ServiceIfHoCfgGrou BTS3900, BTS3900
Freq handover CNOPERATOREXT
dQci pId LTE
policy group ID ENDEDQCI
LST
CNOPERATOREXT
ENDEDQCI

LST
CNOPERATORHO
BTS3900, BTS3900 CFG
CnOperatorHoCfg CnOperatorId CN Operator ID
LTE MOD
CNOPERATORHO
CFG
 MOD
CNOPERATORHO
BTS3900, BTS3900 CFG
CnOperatorHoCfg FirstRatPri First RAT Priority
LTE LST
CNOPERATORHO
CFG

MOD
CNOPERATORHO
Second RAT BTS3900, BTS3900 CFG
CnOperatorHoCfg SecondRatPri
Priority LTE LST
CNOPERATORHO
CFG
 MOD
CNOPERATORHO
LTE TDD inter-freq
TddIfHoA2ThdRsrp BTS3900, BTS3900 CFG
CnOperatorHoCfg A2 Threshold
Offset LTE LST
RSRP Offset
CNOPERATORHO
CFG
 MOD
CNOPERATORHO
LTE FDD inter-freq
FddIfHoA2ThdRsrp BTS3900, BTS3900 CFG
CnOperatorHoCfg A2 Threshold
Offset LTE LST
RSRP Offset
CNOPERATORHO
CFG
 MOD
CNOPERATORHO
UTRAN A2
UtranA2ThdRsrpOff BTS3900, BTS3900 CFG
CnOperatorHoCfg Threshold RSRP
set LTE LST
Offset
CNOPERATORHO
CFG
 MOD
CNOPERATORHO
GERAN A2
GeranA2ThdRsrpOf BTS3900, BTS3900 CFG
CnOperatorHoCfg Threshold RSRP
fset LTE LST
Offset
CNOPERATORHO
CFG
 MOD
CNOPERATORHO
SRVCC with PSHO
SrvccWithPsBased BTS3900, BTS3900 CFG
CnOperatorHoCfg Based UTRAN Cell
CellCapSw LTE LST
Capb Switch
CNOPERATORHO
CFG

MOD
CNOPERATORHO
PsInterRatSecondP PS Inter-RAT BTS3900, BTS3900 CFG
CnOperatorHoCfg
ri Second Priority LTE LST
CNOPERATORHO
CFG
 MOD
CNOPERATORHO
PsInterRatHighestP PS Inter-RAT BTS3900, BTS3900 CFG
CnOperatorHoCfg
ri Highest Priority LTE LST
CNOPERATORHO
CFG

MOD
CNOPERATORHO
PsInterRatLowestPr PS Inter-RAT BTS3900, BTS3900 CFG
CnOperatorHoCfg
i Lowest Priority LTE LST
CNOPERATORHO
CFG

ADD
CNOPERATORSPI
DCFG
LST
CNOPERATORSPI
BTS3900, BTS3900 DCFG
CnOperatorSpidCfg CnOperatorId CN Operator ID
LTE MOD
CNOPERATORSPI
DCFG
RMV
CNOPERATORSPI
DCFG
 ADD
CNOPERATORSPI
DCFG
LST
CNOPERATORSPI
BTS3900, BTS3900 DCFG
CnOperatorSpidCfg Spid Spid
LTE MOD
CNOPERATORSPI
DCFG
RMV
CNOPERATORSPI
DCFG

ADD
CNOPERATORSPI
DCFG
MOD
RAT frequency BTS3900, BTS3900
CnOperatorSpidCfg RatFreqPriorityInd CNOPERATORSPI
priority indication LTE
DCFG
LST
CNOPERATORSPI
DCFG

ADD
CNOPERATORSPI
DCFG
MOD
RatFreqPriorityGrou RAT frequency BTS3900, BTS3900
CnOperatorSpidCfg CNOPERATORSPI
pId priority group ID LTE
DCFG
LST
CNOPERATORSPI
DCFG

LST
CNOPERATORSTA
CnOperatorStandar BTS3900, BTS3900 NDARDQCI
CnOperatorId CN Operator ID
dQci LTE MOD
CNOPERATORSTA
NDARDQCI
 LST
CNOPERATORSTA
CnOperatorStandar QoS Class BTS3900, BTS3900 NDARDQCI
Qci
dQci Indication LTE MOD
CNOPERATORSTA
NDARDQCI

MOD
CNOPERATORSTA
Service-based inter-
CnOperatorStandar ServiceIrHoCfgGro BTS3900, BTS3900 NDARDQCI
RAT handover
dQci upId LTE LST
policy group ID
CNOPERATORSTA
NDARDQCI

MOD
CNOPERATORSTA
Service-based inter-
CnOperatorStandar ServiceIfHoCfgGrou BTS3900, BTS3900 NDARDQCI
Freq handover
dQci pId LTE LST
policy group ID
CNOPERATORSTA
NDARDQCI
 MOD
CNOPERATORSTA
Service-based
CnOperatorStandar ServiceHoBearerPo BTS3900, BTS3900 NDARDQCI
Handover Bearer
dQci licy LTE LST
Policy
CNOPERATORSTA
NDARDQCI
 MOD
CNOPERATORSTA
CnOperatorStandar BTS3900, BTS3900 NDARDQCI
LocalQciArp Local QCI ARP
dQci LTE LST
CNOPERATORSTA
NDARDQCI

LST
CSFALLBACKBLIN
CSFallBackBlindHo BTS3900, BTS3900 DHOCFG
CnOperatorId CN Operator ID
Cfg LTE MOD
CSFALLBACKBLIN
DHOCFG
 MOD
CSFALLBACKBLIN
CSFallBackBlindHo Highest priority BTS3900, BTS3900 DHOCFG
InterRatHighestPri
Cfg InterRat LTE LST
CSFALLBACKBLIN
DHOCFG
 MOD
CSFALLBACKBLIN
CSFallBackBlindHo Second priority BTS3900, BTS3900 DHOCFG
InterRatSecondPri
Cfg InterRat LTE LST
CSFALLBACKBLIN
DHOCFG
 MOD
CSFALLBACKBLIN
CSFallBackBlindHo Lowest priority BTS3900, BTS3900 DHOCFG
InterRatLowestPri
Cfg InterRat LTE LST
CSFALLBACKBLIN
DHOCFG

MOD
CSFALLBACKBLIN
CSFallBackBlindHo UTRAN LCS BTS3900, BTS3900 DHOCFG
UtranLcsCap
Cfg capability LTE LST
CSFALLBACKBLIN
DHOCFG

MOD
CSFALLBACKBLIN
CSFallBackBlindHo GERAN LCS BTS3900, BTS3900 DHOCFG
GeranLcsCap
Cfg capability LTE LST
CSFALLBACKBLIN
DHOCFG
 MOD
CSFALLBACKBLIN
CSFallBackBlindHo CDMA2000 LCS BTS3900, BTS3900 DHOCFG
CdmaLcsCap
Cfg capability LTE LST
CSFALLBACKBLIN
DHOCFG

MOD
CSFALLBACKBLIN
CSFB Highest
CSFallBackBlindHo BTS3900, BTS3900 DHOCFG
IdleCsfbHighestPri priority InterRat for
Cfg LTE LST
Idle UE
CSFALLBACKBLIN
DHOCFG
 MOD
CSFALLBACKBLIN
CSFB Second
CSFallBackBlindHo BTS3900, BTS3900 DHOCFG
IdleCsfbSecondPri priority InterRat for
Cfg LTE LST
Idle UE
CSFALLBACKBLIN
DHOCFG
 MOD
CSFALLBACKBLIN
CSFB Lowest
CSFallBackBlindHo BTS3900, BTS3900 DHOCFG
IdleCsfbLowestPri priority InterRat for
Cfg LTE LST
Idle UE
CSFALLBACKBLIN
DHOCFG

MOD
CSFALLBACKBLIN
CSFB to UTRAN
CSFallBackBlindHo UtranCsfbBlindRedi BTS3900, BTS3900 DHOCFG
Blind Redirection
Cfg rRrSw LTE LST
RR Switch
CSFALLBACKBLIN
DHOCFG
 MOD
CSFALLBACKPOLI
CSFallBackPolicyCf CSFB handover BTS3900, BTS3900 CYCFG
CsfbHoPolicyCfg
g policy Configuration LTE LST
CSFALLBACKPOLI
CYCFG

MOD
CSFALLBACKPOLI
CSFB handover
CSFallBackPolicyCf IdleModeCsfbHoPol BTS3900, BTS3900 CYCFG
policy Configuration
g icyCfg LTE LST
for idle ue
CSFALLBACKPOLI
CYCFG

MOD
CSFALLBACKPOLI
Csfb User Arp
CSFallBackPolicyCf CsfbUserArpCfgSwi BTS3900, BTS3900 CYCFG
Configuration
g tch LTE LST
Switch
CSFALLBACKPOLI
CYCFG
 MOD
CSFALLBACKPOLI
CSFallBackPolicyCf Normal Csfb User BTS3900, BTS3900 CYCFG
NormalCsfbUserArp
g Arp LTE LST
CSFALLBACKPOLI
CYCFG

ADD
EUTRANVOIPHOB
LKLIST
LST
EutranVoipHoBlkLis Mobile country BTS3900, BTS3900
Mcc EUTRANVOIPHOB
t code LTE
LKLIST
RMV
EUTRANVOIPHOB
LKLIST

ADD
EUTRANVOIPHOB
LKLIST
LST
EutranVoipHoBlkLis Mobile network BTS3900, BTS3900
Mnc EUTRANVOIPHOB
t code LTE
LKLIST
RMV
EUTRANVOIPHOB
LKLIST
 ADD
EUTRANVOIPHOB
LKLIST
LST
EutranVoipHoBlkLis BTS3900, BTS3900
Tac Tac EUTRANVOIPHOB
t LTE
LKLIST
RMV
EUTRANVOIPHOB
LKLIST

INTERPLMNHOLIS
T
LST
BTS3900, BTS3900
InterPlmnHoList CnOperatorId CN Operator ID INTERPLMNHOLIS
LTE
T
RMV
INTERPLMNHOLIS

ADD
INTERPLMNHOLIS
T
LST
Target Mobile BTS3900, BTS3900
InterPlmnHoList TarMcc INTERPLMNHOLIS
country code LTE
T
RMV
INTERPLMNHOLIS
T
 ADD
INTERPLMNHOLIS
T
LST
Target Mobile BTS3900, BTS3900
InterPlmnHoList TarMnc INTERPLMNHOLIS
network code LTE
T
RMV
INTERPLMNHOLIS
T

ADD
RATFREQPRIORIT
YGROUP
LST
RATFREQPRIORIT
RatFreqPriorityGrou RatFreqPriorityGrou RAT frequency BTS3900, BTS3900 YGROUP
p pId priority group ID LTE MOD
RATFREQPRIORIT
YGROUP
RMV
RATFREQPRIORIT
YGROUP

ADD
RATFREQPRIORIT
YGROUP
LST
RATFREQPRIORIT
RatFreqPriorityGrou BTS3900, BTS3900 YGROUP
RatType RAT Type
p LTE MOD
RATFREQPRIORIT
YGROUP
RMV
RATFREQPRIORIT
YGROUP
 ADD
RATFREQPRIORIT
YGROUP
LST
RATFREQPRIORIT
RatFreqPriorityGrou DL Earfcn or BTS3900, BTS3900 YGROUP
DlEarfcn
p Bandclass LTE MOD
RATFREQPRIORIT
YGROUP
RMV
RATFREQPRIORIT
YGROUP

ADD
RATFREQPRIORIT
YGROUP
MOD
RatFreqPriorityGrou BTS3900, BTS3900
Priority Priority RATFREQPRIORIT
p LTE
YGROUP
LST
RATFREQPRIORIT
YGROUP

ADD
RATFREQPRIORIT
YGROUP
MOD
RatFreqPriorityGrou GERAN Frequency BTS3900, BTS3900
BandIndicator RATFREQPRIORIT
p Indicator LTE
YGROUP
LST
RATFREQPRIORIT
YGROUP

ADD
SERVICEIFDLEAR
FCNGRP
LST
SERVICEIFDLEAR
ServiceIfDlEarfcnGr BTS3900, BTS3900 FCNGRP
CnOperatorId CN Operator ID
p LTE MOD
SERVICEIFDLEAR
FCNGRP
RMV
SERVICEIFDLEAR
FCNGRP
 ADD
SERVICEIFDLEAR
FCNGRP
LST
SERVICEIFDLEAR
ServiceIfDlEarfcnGr ServiceIfHoCfgGrou Service Interfreq Ho BTS3900, BTS3900 FCNGRP
p pId Policy Group Id LTE MOD
SERVICEIFDLEAR
FCNGRP
RMV
SERVICEIFDLEAR
FCNGRP

ADD
SERVICEIFDLEAR
FCNGRP
LST
SERVICEIFDLEAR
ServiceIfDlEarfcnGr Downlink EARFCN BTS3900, BTS3900 FCNGRP
DlEarfcnIndex
p Index LTE MOD
SERVICEIFDLEAR
FCNGRP
RMV
SERVICEIFDLEAR
FCNGRP

ADD
SERVICEIFDLEAR
FCNGRP
MOD
ServiceIfDlEarfcnGr BTS3900, BTS3900
DlEarfcn Downlink EARFCN SERVICEIFDLEAR
p LTE
FCNGRP
LST
SERVICEIFDLEAR
FCNGRP
 ADD
SERVICEIFDLEAR
FCNGRP
MOD
ServiceIfDlEarfcnGr ServiceHoFreqPrior Service Handover BTS3900, BTS3900
SERVICEIFDLEAR
p ity Frequency Priority LTE
FCNGRP
LST
SERVICEIFDLEAR
FCNGRP

ADD
SERVICEIFHOCFG
GROUP
LST
SERVICEIFHOCFG
ServiceIfHoCfgGrou BTS3900, BTS3900 GROUP
CnOperatorId CN Operator ID
p LTE MOD
SERVICEIFHOCFG
GROUP
RMV
SERVICEIFHOCFG
GROUP

ADD
SERVICEIFHOCFG
GROUP
LST
SERVICEIFHOCFG
Service-based inter-
ServiceIfHoCfgGrou ServiceIfHoCfgGrou BTS3900, BTS3900 GROUP
Freq handover
p pId LTE MOD
policy group ID
SERVICEIFHOCFG
GROUP
RMV
SERVICEIFHOCFG
GROUP
 ADD
SERVICEIFHOCFG
GROUP
MOD
ServiceIfHoCfgGrou Inter-Freq handover BTS3900, BTS3900
InterFreqHoState SERVICEIFHOCFG
p state LTE
GROUP
LST
SERVICEIFHOCFG
GROUP

ADD
SERVICEIFHOCFG
GROUP
Service-based MOD
ServiceIfHoCfgGrou BTS3900, BTS3900
A4RptWaitingTimer InterFreq A4 Report SERVICEIFHOCFG
p LTE
Waiting Timer GROUP
LST
SERVICEIFHOCFG
GROUP
 ADD
SERVICEIFHOCFG
GROUP
Service-based MOD
ServiceIfHoCfgGrou BTS3900, BTS3900
A4TimeToTriger InterFreq A4 time to SERVICEIFHOCFG
p LTE
trigger GROUP
LST
SERVICEIFHOCFG
GROUP

ADD
SERVICEIRHOCF
GGROUP
LST
SERVICEIRHOCF
ServiceIrHoCfgGro BTS3900, BTS3900 GGROUP
CnOperatorId CN Operator ID
up LTE MOD
SERVICEIRHOCF
GGROUP
RMV
SERVICEIRHOCF
GGROUP
 ADD
SERVICEIRHOCF
GGROUP
LST
SERVICEIRHOCF
Service-based inter-
ServiceIrHoCfgGro ServiceIrHoCfgGro BTS3900, BTS3900 GGROUP
RAT handover
up upId LTE MOD
policy group ID
SERVICEIRHOCF
GGROUP
RMV
SERVICEIRHOCF
GGROUP

ADD
SERVICEIRHOCF
GGROUP
MOD
ServiceIrHoCfgGro Inter-RAT handover BTS3900, BTS3900
InterRatHoState SERVICEIRHOCF
up state LTE
GGROUP
LST
SERVICEIRHOCF
GGROUP
 ADD
SERVICEIRHOCF
GGROUP
Service-based MOD
ServiceIrHoCfgGro BTS3900, BTS3900
ServiceIrMeasMode Inter-RAT HO SERVICEIRHOCF
up LTE
Measure Mode GGROUP
LST
SERVICEIRHOCF
GGROUP

ADD SPIDCFG
BTS3900, BTS3900 LST SPIDCFG
SpidCfg Spid Spid
LTE MOD SPIDCFG
RMV SPIDCFG

ADD SPIDCFG
BTS3900, BTS3900
SpidCfg DrxStatus Drx status MOD SPIDCFG
LTE
LST SPIDCFG
 ADD SPIDCFG
RAT frequency BTS3900, BTS3900
SpidCfg RatFreqPriorityInd MOD SPIDCFG
priority indication LTE
LST SPIDCFG

ADD SPIDCFG
RatFreqPriorityGrou RAT frequency BTS3900, BTS3900
SpidCfg MOD SPIDCFG
pId priority group ID LTE
LST SPIDCFG

ADD SPIDCFG
BTS3900, BTS3900
SpidCfg PreallocationStatus PreallocationStatus MOD SPIDCFG
LTE
LST SPIDCFG

ADD SPIDCFG
InterFreq Mlb BTS3900, BTS3900
SpidCfg InterFreqMlbSwitch MOD SPIDCFG
Switch LTE
LST SPIDCFG
 ADD SPIDCFG
BTS3900, BTS3900
SpidCfg InterRatMlbSwitch InterRat Mlb Switch MOD SPIDCFG
LTE
LST SPIDCFG

SPID-based ADD SPIDCFG

HoBackToHPLMNS BTS3900, BTS3900
SpidCfg Handover Back To MOD SPIDCFG
witch LTE
HPLMN Switch LST SPIDCFG

ADD SPIDCFG
UL Scheduling BTS3900, BTS3900
SpidCfg UlSchPriorityCoeff MOD SPIDCFG
Priority Coefficient LTE
LST SPIDCFG
 ADD SPIDCFG
DL Scheduling BTS3900, BTS3900
SpidCfg DlSchPriorityCoeff MOD SPIDCFG
Priority Coefficient LTE
LST SPIDCFG

Intra-Freq ADD SPIDCFG

IntraFreqHoA3Offse BTS3900, BTS3900
SpidCfg Handover Offset MOD SPIDCFG
tFactor LTE
Factor LST SPIDCFG
 ADD SPIDCFG
InterFreqHoA2Rsrp Inter-Freq A2 RSRP BTS3900, BTS3900
SpidCfg MOD SPIDCFG
ThdFactor Threshold Factor LTE
LST SPIDCFG
 Inter-Freq A2 ADD SPIDCFG
InterFreqHoA2Rsrq BTS3900, BTS3900
SpidCfg RSRQ Threshold MOD SPIDCFG
ThdFactor LTE
Factor LST SPIDCFG
 ADD SPIDCFG
BTS3900, BTS3900
SpidCfg SpecifiedUserFlag Specified User Flag MOD SPIDCFG
LTE
LST SPIDCFG

ADD
SPIDGRPCFG
BTS3900, BTS3900
SpidGrpCfg SpidGrpId SPID Group ID LST SPIDGRPCFG
LTE
RMV
SPIDGRPCFG
 ADD
SPIDGRPCFG
BTS3900, BTS3900
SpidGrpCfg StartSpid Start SPID LST SPIDGRPCFG
LTE
RMV
SPIDGRPCFG

ADD
SPIDGRPCFG
BTS3900, BTS3900
SpidGrpCfg EndSpid End SPID LST SPIDGRPCFG
LTE
RMV
SPIDGRPCFG

ADD
SPIDHPLMNLIST
BTS3900, BTS3900 LST
SpidHPlmnList StartSpid Start SPID
LTE SPIDHPLMNLIST
RMV
SPIDHPLMNLIST

ADD
SPIDHPLMNLIST
BTS3900, BTS3900 LST
SpidHPlmnList EndSpid End SPID
LTE SPIDHPLMNLIST
RMV
SPIDHPLMNLIST
 ADD
SPIDHPLMNLIST
Mobile Country BTS3900, BTS3900 LST
SpidHPlmnList Mcc
Code LTE SPIDHPLMNLIST
RMV
SPIDHPLMNLIST

ADD
SPIDHPLMNLIST
Mobile Network BTS3900, BTS3900 LST
SpidHPlmnList Mnc
Code LTE SPIDHPLMNLIST
RMV
SPIDHPLMNLIST
 ADD
UTRANNETWORK
CAPCFG
LST
UTRANNETWORK
UtranNetworkCapCf Mobile country BTS3900, BTS3900 CAPCFG
Mcc
g code LTE MOD
UTRANNETWORK
CAPCFG
RMV
UTRANNETWORK
CAPCFG

ADD
UTRANNETWORK
CAPCFG
LST
UTRANNETWORK
UtranNetworkCapCf Mobile network BTS3900, BTS3900 CAPCFG
Mnc
g code LTE MOD
UTRANNETWORK
CAPCFG
RMV
UTRANNETWORK
CAPCFG
 ADD
UTRANNETWORK
CAPCFG
LST
UTRANNETWORK
UtranNetworkCapCf BTS3900, BTS3900 CAPCFG
RncId Rnc Id
g LTE MOD
UTRANNETWORK
CAPCFG
RMV
UTRANNETWORK
CAPCFG
 ADD
UTRANNETWORK
CAPCFG
MOD
UtranNetworkCapCf Network Capability BTS3900, BTS3900
NetworkCapCfg UTRANNETWORK
g Configuration LTE
CAPCFG
LST
UTRANNETWORK
CAPCFG

LST
ENBCNOPQCIRSV
eNBCnOpQciRsvd BTS3900, BTS3900 DPARA
CnOperatorId CN Operator ID
Para LTE MOD
ENBCNOPQCIRSV
DPARA

LST
ENBCNOPQCIRSV
eNBCnOpQciRsvd QoS Class BTS3900, BTS3900 DPARA
Qci
Para Indication LTE MOD
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved Switch BTS3900, BTS3900 DPARA
RsvdSwPara0
Para Parameter 0 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved Switch BTS3900, BTS3900 DPARA
RsvdSwPara1
Para Parameter 1 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved Switch BTS3900, BTS3900 DPARA
RsvdSwPara2
Para Parameter 2 LTE LST
ENBCNOPQCIRSV
DPARA

MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara2
Para Parameter 2 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara3
Para Parameter 3 LTE LST
ENBCNOPQCIRSV
DPARA

MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara4
Para Parameter 4 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara5
Para Parameter 5 LTE LST
ENBCNOPQCIRSV
DPARA

MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara6
Para Parameter 6 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara7
Para Parameter 7 LTE LST
ENBCNOPQCIRSV
DPARA

MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara8
Para Parameter 8 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara9
Para Parameter 9 LTE LST
ENBCNOPQCIRSV
DPARA

MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara10
Para Parameter 10 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara11
Para Parameter 11 LTE LST
ENBCNOPQCIRSV
DPARA

MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara12
Para Parameter 12 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara13
Para Parameter 13 LTE LST
ENBCNOPQCIRSV
DPARA

MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara14
Para Parameter 14 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara15
Para Parameter 15 LTE LST
ENBCNOPQCIRSV
DPARA

MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara16
Para Parameter 16 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara17
Para Parameter 17 LTE LST
ENBCNOPQCIRSV
DPARA

MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara18
Para Parameter 18 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara19
Para Parameter 19 LTE LST
ENBCNOPQCIRSV
DPARA

MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara20
Para Parameter 20 LTE LST
ENBCNOPQCIRSV
DPARA
 MOD
ENBCNOPQCIRSV
eNBCnOpQciRsvd Reserved BTS3900, BTS3900 DPARA
RsvdPara21
Para Parameter 21 LTE LST
ENBCNOPQCIRSV
DPARA

ADD
ENODEBFUNCTIO
N
MOD
ENODEBFUNCTIO
eNodeBFunctionNa eNodeB Function BTS3900, BTS3900 N
eNodeBFunction
me Name LTE RMV
ENODEBFUNCTIO
N
LST
ENODEBFUNCTIO
N
 ADD
ENODEBFUNCTIO
Application BTS3900, BTS3900 N
eNodeBFunction ApplicationRef
Reference LTE LST
ENODEBFUNCTIO
N

ADD
ENODEBFUNCTIO
N
MOD
BTS3900, BTS3900
eNodeBFunction eNodeBId eNodeB ID ENODEBFUNCTIO
LTE
N
LST
ENODEBFUNCTIO
N
ENODEBFUNCTIO
N
MOD
BTS3900, BTS3900
eNodeBFunction UserLabel User Label ENODEBFUNCTIO
LTE
N
LST
ENODEBFUNCTIO

LST
BTS3900, BTS3900
eNodeBFunction NermVersion NeRM Version ENODEBFUNCTIO
LTE
N

LST
BTS3900, BTS3900
eNodeBFunction ProductVersion Product Version ENODEBFUNCTIO
LTE
N

ADD EUAPN
BTS3900, BTS3900 LST EUAPN
EUAPN APN APN
LTE MOD EUAPN
RMV EUAPN

ADD EUAPN
Primary Domain BTS3900, BTS3900
EUAPN PrimaryDNS MOD EUAPN
Name Server LTE
LST EUAPN
 ADD EUAPN
Secondary Domain BTS3900, BTS3900
EUAPN SecondaryDNS MOD EUAPN
Name Server LTE
LST EUAPN

ADD EUAPN
BTS3900, BTS3900
EUAPN IPAddressPoolID Address Pool ID MOD EUAPN
LTE
LST EUAPN

ADD
EUAPNTEMPLATE
LST
BTS3900, BTS3900 EUAPNTEMPLATE
EUAPNTemplate APNTemplateID APN Template ID
LTE MOD
EUAPNTEMPLATE
RMV
EUAPNTEMPLATE

ADD
EUAPNTEMPLATE
BTS3900, BTS3900 MOD
EUAPNTemplate APN APN
LTE EUAPNTEMPLATE
LST
EUAPNTEMPLATE

ADD
EUAPNTEMPLATE
BTS3900, BTS3900 MOD
EUAPNTemplate QCI QoS class identifier
LTE EUAPNTEMPLATE
LST
EUAPNTEMPLATE

ADD
EUAPNTEMPLATE
APN Aggregate
BTS3900, BTS3900 MOD
EUAPNTemplate APNAMBRDL Maximum Bit Rate
LTE EUAPNTEMPLATE
Downlink
LST
EUAPNTEMPLATE
 ADD
EUAPNTEMPLATE
APN Aggregate
BTS3900, BTS3900 MOD
EUAPNTemplate APNAMBRUL Maximum Bit Rate
LTE EUAPNTEMPLATE
Uplink
LST
EUAPNTEMPLATE

ADD
EUAPNTEMPLATE
Allocation and BTS3900, BTS3900 MOD
EUAPNTemplate ARP
Retention Priority LTE EUAPNTEMPLATE
LST
EUAPNTEMPLATE

ADD
EUAPNTEMPLATE
PreemptionCapabili Preemption BTS3900, BTS3900 MOD
EUAPNTemplate
ty Capability LTE EUAPNTEMPLATE
LST
EUAPNTEMPLATE

ADD
EUAPNTEMPLATE
PreemptionVulnera Preemption BTS3900, BTS3900 MOD
EUAPNTemplate
bility Vulnerability LTE EUAPNTEMPLATE
LST
EUAPNTEMPLATE

ADD EUEPCINFO
BTS3900, BTS3900 LST EUEPCINFO
EUEPCInfo LocalEpcId Local EPC ID
LTE MOD EUEPCINFO
RMV EUEPCINFO

ADD EUEPCINFO
BTS3900, BTS3900
EUEPCInfo MmeGroupId MME Group ID MOD EUEPCINFO
LTE
LST EUEPCINFO

ADD EUEPCINFO
BTS3900, BTS3900
EUEPCInfo MMECode MME Code MOD EUEPCINFO
LTE
LST EUEPCINFO
 ADD EUEPCINFO
FullNameForNetwor Full Name for BTS3900, BTS3900
EUEPCInfo MOD EUEPCINFO
k Network LTE
LST EUEPCINFO

ADD EUEPCINFO
ShortNameForNetw Short Name for BTS3900, BTS3900
EUEPCInfo MOD EUEPCINFO
ork Network LTE
LST EUEPCINFO

BTS3900, BTS3900 MOD EUEPCSEC

EUEPCSec CiphAlgo Cipher Algorithm
LTE LST EUEPCSEC

BTS3900, BTS3900 MOD EUEPCSEC

EUEPCSec IntAlgo Integrity Algorithm
LTE LST EUEPCSEC

ADD
EUIPADDRESSPO
OL
LST
EUIPADDRESSPO
BTS3900, BTS3900 OL
EUIPAddressPool IPAddressPoolID IP Address Pool ID
LTE MOD
EUIPADDRESSPO
OL
RMV
EUIPADDRESSPO
OL
 ADD
EUIPADDRESSPO
OL
MOD
BTS3900, BTS3900
EUIPAddressPool StartIPAddress Start IP Address EUIPADDRESSPO
LTE
OL
LST
EUIPADDRESSPO
OL

ADD
EUIPADDRESSPO
OL
MOD
BTS3900, BTS3900
EUIPAddressPool EndIPAddress End IP Address EUIPADDRESSPO
LTE
OL
LST
EUIPADDRESSPO
OL

ADD
EUIPADDRESSPO
OL
MOD
BTS3900, BTS3900
EUIPAddressPool Mask Mask EUIPADDRESSPO
LTE
OL
LST
EUIPADDRESSPO
OL
ACT
EURRNSOFTWAR
E
ADD EURRN
DLD
EURRNSOFTWAR
E
DSP EURRNINFO
BTS3900, BTS3900
EuRrn LocalSubscriberId Local Subscriber ID DSP
LTE
EURRNSOFTWAR
E
LST EURRN
MOD EURRN
RMV EURRN
RST EURRN
RST EURRNPWD
ULD EURRNFILE

ADD EURRN
BTS3900, BTS3900
EuRrn OmIp OM IP MOD EURRN
LTE
LST EURRN

DSP
BTS3900, BTS3900
EuRrn ActiveTime Active Time EURRNSOFTWAR
LTE
E
 ADD EURRN
ExtendedDhcpServ Extended DHCP BTS3900, BTS3900
EuRrn MOD EURRN
erIp Server IP LTE
LST EURRN

ADD EURRN
BTS3900, BTS3900
EuRrn DhcpServerIp DHCP Server IP MOD EURRN
LTE
LST EURRN

DLD
BTS3900, BTS3900 EURRNSOFTWAR
EuRrn DIR Directory Name
LTE E
ULD EURRNFILE

DLD
BTS3900, BTS3900 EURRNSOFTWAR
EuRrn GA Guage Option
LTE E
ULD EURRNFILE
DLD
BTS3900, BTS3900 EURRNSOFTWAR
EuRrn IP FTP Server IP
LTE E
ULD EURRNFILE
DLD
BTS3900, BTS3900 EURRNSOFTWAR
EuRrn PWD Password
LTE E
ULD EURRNFILE
 BTS3900, BTS3900
EuRrn ResetMode Reset Mode RST EURRN
LTE

DSP
BTS3900, BTS3900
EuRrn SoftwareStatus Software Status EURRNSOFTWAR
LTE
E

DSP
BTS3900, BTS3900
EuRrn StorageArea Storage Area EURRNSOFTWAR
LTE
E

EURRNSOFTWAR
E
DLD
BTS3900, BTS3900
EuRrn SV Software Version EURRNSOFTWAR
LTE
E
DSP
EURRNSOFTWAR
DLD
BTS3900, BTS3900 EURRNSOFTWAR
EuRrn USR User Name
LTE E
ULD EURRNFILE

ADD EURRN
SyncEthClockSwitc SyncEth Clock BTS3900, BTS3900
EuRrn MOD EURRN
h Switch LTE
LST EURRN

BTS3900, BTS3900
EuRrn FileType File Type ULD EURRNFILE
LTE

ADD EURRN
BTS3900, BTS3900
EuRrn RelayType Relay Type MOD EURRN
LTE
LST EURRN
 ADD EURRN
BTS3900, BTS3900
EuRrn OmIntfId OM Interface ID MOD EURRN
LTE
LST EURRN

ADD EURRN
BTS3900, BTS3900
EuRrn SeviceIntfId Sevice InterfaceID MOD EURRN
LTE
LST EURRN

ADD EURRN
RRN MAC Aging BTS3900, BTS3900
EuRrn RrnMacAt MOD EURRN
Time LTE
LST EURRN

ADD EURRN
RRN VLAN Tag BTS3900, BTS3900
EuRrn RrnVlanTagSwitch MOD EURRN
Switch LTE
LST EURRN
 ADD EURRN
BTS3900, BTS3900
EuRrn RrnVlanId RRN VLAN ID MOD EURRN
LTE
LST EURRN

ADD EURRN
BTS3900, BTS3900
EuRrn RrnVlanPri RRN VLAN Priority MOD EURRN
LTE
LST EURRN

RRN Information BTS3900, BTS3900

EuRrn RrnInfoReport DSP EURRNINFO
Report LTE
 RRN Information BTS3900, BTS3900
EuRrn RrnInfoParam DSP EURRNINFO
Parameter LTE

ADD EURRN
BTS3900, BTS3900
EuRrn OmIpMask OM IP Mask MOD EURRN
LTE
LST EURRN

ADD EURRNLANIP
BTS3900, BTS3900
EuRrnLanIp LocalSubscriberId Local Subscriber ID LST EURRNLANIP
LTE
RMV EURRNLANIP
 ADD EURRNLANIP
BTS3900, BTS3900
EuRrnLanIp LanIp LAN IP LST EURRNLANIP
LTE
RMV EURRNLANIP

BTS3900, BTS3900 ADD EURRNLANIP

EuRrnLanIp LanMask LAN Mask
LTE LST EURRNLANIP

BTS3900, BTS3900 LST EURRNPORT

EuRrnPort LocalSubscriberId Local Subscriber ID
LTE MOD EURRNPORT

BTS3900, BTS3900 LST EURRNPORT

EuRrnPort PN Port No.
LTE MOD EURRNPORT

BTS3900, BTS3900 MOD EURRNPORT

EuRrnPort PortSwitch Port Switch
LTE LST EURRNPORT

ADD EURRNRT
BTS3900, BTS3900 LST EURRNRT
EuRrnRt RtId Route ID
LTE MOD EURRNRT
RMV EURRNRT

ADD EURRNRT
BTS3900, BTS3900
EuRrnRt LocalSubscriberId Local Subscriber ID MOD EURRNRT
LTE
LST EURRNRT

ADD EURRNRT
BTS3900, BTS3900
EuRrnRt DstIp Destination IP MOD EURRNRT
LTE
LST EURRNRT

ADD EURRNRT
BTS3900, BTS3900
EuRrnRt DstMask Destination Mask MOD EURRNRT
LTE
LST EURRNRT
 ADD EURRNRT
BTS3900, BTS3900
EuRrnRt NextHop Next Hop MOD EURRNRT
LTE
LST EURRNRT

ADD
EUSUBSCRIBER
DEA
EUSUBSCRIBER
BTS3900, BTS3900 LST
EuSubscriber LocalSubscriberId Local Subscriber ID
LTE EUSUBSCRIBER
MOD
EUSUBSCRIBER
RMV
EUSUBSCRIBER

ADD
EUSUBSCRIBER
BTS3900, BTS3900 MOD
EuSubscriber SubscriberType Subscriber Type
LTE EUSUBSCRIBER
LST
EUSUBSCRIBER

ADD
EUSUBSCRIBER
International Mobile BTS3900, BTS3900 MOD
EuSubscriber IMSI
Subscriber ID LTE EUSUBSCRIBER
LST
EUSUBSCRIBER
 ADD
EUSUBSCRIBER
BTS3900, BTS3900 MOD
EuSubscriber RrnId RRN ID
LTE EUSUBSCRIBER
LST
EUSUBSCRIBER

ADD
EUSUBSCRIBER
BTS3900, BTS3900 MOD
EuSubscriber CellId Cell ID
LTE EUSUBSCRIBER
LST
EUSUBSCRIBER

ADD
EUSUBSCRIBER
Individual
BTS3900, BTS3900 MOD
EuSubscriber KI Subscriber
LTE EUSUBSCRIBER
Authentication Key
LST
EUSUBSCRIBER
 ADD
EUSUBSCRIBER
Operator Variant
BTS3900, BTS3900 MOD
EuSubscriber OP Algorithm
LTE EUSUBSCRIBER
Configuration Field
LST
EUSUBSCRIBER

ADD
EUSUBSCRIBER
Uplink Aggregate BTS3900, BTS3900 MOD
EuSubscriber UlAmbr
Maximum Bit Rate LTE EUSUBSCRIBER
LST
EUSUBSCRIBER

ADD
EUSUBSCRIBER
Downlink Aggregate BTS3900, BTS3900 MOD
EuSubscriber DlAmbr
Maximum Bit Rate LTE EUSUBSCRIBER
LST
EUSUBSCRIBER

ADD
EUSUBSCRIBER
SubscriberTemplate Subscriber BTS3900, BTS3900 MOD
EuSubscriber
ID Template ID LTE EUSUBSCRIBER
LST
EUSUBSCRIBER

ADD
EUSUBSCRIBER
Subscriber BTS3900, BTS3900 MOD
EuSubscriber SubscriberDesc
Description LTE EUSUBSCRIBER
LST
EUSUBSCRIBER
 ADD
EUSUBSCRIBERT
EMPLATE
LST
EUSUBSCRIBERT
EUSubscriberTempl SubscriberTemplate Subscirber BTS3900, BTS3900 EMPLATE
ate ID Template ID LTE MOD
EUSUBSCRIBERT
EMPLATE
RMV
EUSUBSCRIBERT
EMPLATE

ADD
EUSUBSCRIBERT
EMPLATE
MOD
EUSubscriberTempl BTS3900, BTS3900
APNTemplateID APN Template ID EUSUBSCRIBERT
ate LTE
EMPLATE
LST
EUSUBSCRIBERT
EMPLATE

ADD
EUSUBSCRIBERT
EMPLATE
MOD
EUSubscriberTempl BTS3900, BTS3900
TemplateName Template Name EUSUBSCRIBERT
ate LTE
EMPLATE
LST
EUSUBSCRIBERT
EMPLATE

ADD
EUSUBSCRIBERT
EMPLATE
Secondary
MOD
EUSubscriberTempl SecondaryAPNTem APNTemplate BTS3900, BTS3900
EUSUBSCRIBERT
ate plateCfgInd Configuration LTE
EMPLATE
Indicator
LST
EUSUBSCRIBERT
EMPLATE

ADD
EUSUBSCRIBERT
EMPLATE
MOD
EUSubscriberTempl SecondaryAPNTem Secondary APN BTS3900, BTS3900
EUSUBSCRIBERT
ate plateID Template ID LTE
EMPLATE
LST
EUSUBSCRIBERT
EMPLATE
 ADD
RELAYEXTENDED
QCI
LST
RELAYEXTENDED
Extended QoS BTS3900, BTS3900 QCI
RelayExtendedQci ExtendedQci
Class Indication LTE MOD
RELAYEXTENDED
QCI
RMV
RELAYEXTENDED
QCI

ADD
RELAYEXTENDED
QCI
MOD
Default Bearer BTS3900, BTS3900
RelayExtendedQci DefaultBearerInd RELAYEXTENDED
Indication LTE
QCI
LST
RELAYEXTENDED
QCI

ADD
RELAYEXTENDED
QCI
MOD
RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900
RelayExtendedQci RELAYEXTENDED
d parameter group ID LTE
QCI
LST
RELAYEXTENDED
QCI
 ADD
RELAYEXTENDED
QCI
MOD
BTS3900, BTS3900
RelayExtendedQci SchType Schedule Type RELAYEXTENDED
LTE
QCI
LST
RELAYEXTENDED
QCI
 ADD
RELAYEXTENDED
QCI
MOD
Uplink Schedule BTS3900, BTS3900
RelayExtendedQci UlSchWeight RELAYEXTENDED
Weight LTE
QCI
LST
RELAYEXTENDED
QCI

ADD
RELAYEXTENDED
QCI
MOD
Downlink Schedule BTS3900, BTS3900
RelayExtendedQci DlSchWeight RELAYEXTENDED
Weight LTE
QCI
LST
RELAYEXTENDED
QCI
 ADD
RELAYEXTENDED
QCI
MOD
BTS3900, BTS3900
RelayExtendedQci DscpLower Dscp Lower RELAYEXTENDED
LTE
QCI
LST
RELAYEXTENDED
QCI

ADD
RELAYEXTENDED
QCI
MOD
BTS3900, BTS3900
RelayExtendedQci DscpUpper Dscp Upper RELAYEXTENDED
LTE
QCI
LST
RELAYEXTENDED
QCI

ADD
RELAYEXTENDED
QCI
MOD
RrnPreAllocationW RRN Pre-allocation BTS3900, BTS3900
RelayExtendedQci RELAYEXTENDED
eight Weight LTE
QCI
LST
RELAYEXTENDED
QCI
 ADD
RELAYEXTENDED
QCI
MOD
BTS3900, BTS3900
RelayExtendedQci PqType PQ Type RELAYEXTENDED
LTE
QCI
LST
RELAYEXTENDED
QCI
 MOD
ANRMEASUREPA
Intrafreq Measure
A3TimeToTrigForA BTS3900, BTS3900 RAM
ANRMeasureParam Time to Trigger for
NR LTE LST
ANR
ANRMEASUREPA
RAM
 MOD
ANRMEASUREPA
Intrafreq Hysteresis BTS3900, BTS3900 RAM
ANRMeasureParam A3HystForANR
for ANR LTE LST
ANRMEASUREPA
RAM
 MOD
ANRMEASUREPA
Intrafreq Measure BTS3900, BTS3900 RAM
ANRMeasureParam A3OffsetForANR
Offset for ANR LTE LST
ANRMEASUREPA
RAM
 MOD
ANRMEASUREPA
Interfreq Measure
A4TimeToTrigForA BTS3900, BTS3900 RAM
ANRMeasureParam Time to Trigger for
NR LTE LST
ANR
ANRMEASUREPA
RAM
 MOD
ANRMEASUREPA
Interfreq Hysteresis BTS3900, BTS3900 RAM
ANRMeasureParam A4HystForANR
for ANR LTE LST
ANRMEASUREPA
RAM
 MOD
ANRMEASUREPA
Interfreq RSRP BTS3900, BTS3900 RAM
ANRMeasureParam A4ThdRsrpForANR
Threshold for ANR LTE LST
ANRMEASUREPA
RAM

MOD
COUNTERCHECK
BTS3900, BTS3900 PARA
CounterCheckPara CounterCheckTimer Counter check timer
LTE LST
COUNTERCHECK
PARA
 MOD
COUNTERCHECK
CounterCheckCoun Counter check BTS3900, BTS3900 PARA
CounterCheckPara
tNum count number LTE LST
COUNTERCHECK
PARA

MOD
COUNTERCHECK
CounterCheckUser Counter check user BTS3900, BTS3900 PARA
CounterCheckPara
RelSwitch Release switch LTE LST
COUNTERCHECK
PARA

MOD
ENODEBCIPHERC
Primary cipher BTS3900, BTS3900 AP
ENodeBCipherCap PrimaryCipherAlgo
algorithm LTE LST
ENODEBCIPHERC
AP
 MOD
ENODEBCIPHERC
Second cipher BTS3900, BTS3900 AP
ENodeBCipherCap SecondCipherAlgo
algorithm LTE LST
ENODEBCIPHERC
AP

MOD
ENODEBCIPHERC
Third cipher BTS3900, BTS3900 AP
ENodeBCipherCap ThirdCipherAlgo
algorithm LTE LST
ENODEBCIPHERC
AP

MOD
ENODEBCIPHERC
Fourth cipher BTS3900, BTS3900 AP
ENodeBCipherCap FourthCipherAlgo
algorithm LTE LST
ENODEBCIPHERC
AP
 MOD
ENODEBCONNSTA
ENodeBConnState S1MessageWaiting S1 Message BTS3900, BTS3900 TETIMER
Timer Timer Waiting Timer LTE LST
ENODEBCONNSTA
TETIMER
 MOD
ENODEBCONNSTA
ENodeBConnState X2MessageWaiting X2 Message BTS3900, BTS3900 TETIMER
Timer Timer Waiting Timer LTE LST
ENODEBCONNSTA
TETIMER
 MOD
ENODEBCONNSTA
ENodeBConnState UuMessageWaiting UU Message BTS3900, BTS3900 TETIMER
Timer Timer Waiting Timer LTE LST
ENODEBCONNSTA
TETIMER

MOD
ENODEBCONNSTA
CDMA2000 1xRTT
ENodeBConnState Cdma1XrttHoUuPre BTS3900, BTS3900 TETIMER
HO Uu Prepare
Timer pareTimer LTE LST
Timer
ENODEBCONNSTA
TETIMER
 MOD
ENODEBCONNSTA
CDMA2000 1xRTT
ENodeBConnState Cdma1XrttHoS1Wa BTS3900, BTS3900 TETIMER
HO S1 Waiting
Timer itingTimer LTE LST
Timer
ENODEBCONNSTA
TETIMER

MOD
ENODEBCONNSTA
ENodeBConnState Cdma1XrttHoCompl CDMA2000 1xRTT BTS3900, BTS3900 TETIMER
Timer eteTimer HO Complete Timer LTE LST
ENODEBCONNSTA
TETIMER

MOD
ENODEBCONNSTA
ENodeBConnState CdmaHrpdHoComp CDMA2000 HRPD BTS3900, BTS3900 TETIMER
Timer leteTimer HO Complete Timer LTE LST
ENODEBCONNSTA
TETIMER
 MOD
ENODEBCONNSTA
CDMA2000 HRPD
ENodeBConnState CdmaHrpdHoS1Wa BTS3900, BTS3900 TETIMER
HO S1 Waiting
Timer itingTimer LTE LST
Timer
ENODEBCONNSTA
TETIMER

MOD
ENODEBCONNSTA
CDMA2000 HRPD
ENodeBConnState CdmaHrpdHoUuPre BTS3900, BTS3900 TETIMER
HO Uu Prepare
Timer pareTimer LTE LST
Timer
ENODEBCONNSTA
TETIMER
 MOD
ENODEBCONNSTA
ENodeBConnState WaitRrcConnSetup RRCConnSetupCm BTS3900, BTS3900 TETIMER
Timer CmpTimer p Waiting Timer LTE LST
ENODEBCONNSTA
TETIMER

MOD
ENODEBCONNSTA
ENodeBConnState SecCmpWaitingTim SecurityModeComp BTS3900, BTS3900 TETIMER
Timer er lete Waiting Timer LTE LST
ENODEBCONNSTA
TETIMER
 MOD
ENODEBCONNSTA
Unprotected
ENodeBConnState UpUeCapInfoWaitin BTS3900, BTS3900 TETIMER
UeCapInfo Waiting
Timer gTimer LTE LST
Timer
ENODEBCONNSTA
TETIMER

MOD
ENODEBCONNSTA
ENodeBConnState FirstForwardPacket First Forward BTS3900, BTS3900 TETIMER
Timer Timer Packet Timer LTE LST
ENODEBCONNSTA
TETIMER
 MOD
ENODEBCONNSTA
ENodeBConnState BTS3900, BTS3900 TETIMER
EndMarkerTimer End Marker Timer
Timer LTE LST
ENODEBCONNSTA
TETIMER

MOD
ENODEBCONNSTA
S1 Message
ENodeBConnState S1MsgWaitingTimer BTS3900, BTS3900 TETIMER
Waiting Timer for
Timer Qci1 LTE LST
Qci1
ENODEBCONNSTA
TETIMER
 MOD
ENODEBCONNSTA
X2 Message
ENodeBConnState X2MessageWaiting BTS3900, BTS3900 TETIMER
Waiting Timer for
Timer TimerQci1 LTE LST
Qci1
ENODEBCONNSTA
TETIMER

MOD
ENODEBCONNSTA
UU Message
ENodeBConnState UuMessageWaiting BTS3900, BTS3900 TETIMER
Waiting Timer for
Timer TimerQci1 LTE LST
Qci1
ENODEBCONNSTA
TETIMER
 MOD
ENODEBCONNSTA
ENodeBConnState Bearer Activity BTS3900, BTS3900 TETIMER
BearerActivityThd
Timer Threshold LTE LST
ENODEBCONNSTA
TETIMER

MOD
ENODEBINTEGRIT
ENodeBIntegrityCa PrimaryIntegrityAlg Primary integrity BTS3900, BTS3900 YCAP
p o algorithm LTE LST
ENODEBINTEGRIT
YCAP

MOD
ENODEBINTEGRIT
ENodeBIntegrityCa SecondIntegrityAlg Second integrity BTS3900, BTS3900 YCAP
p o algorithm LTE LST
ENODEBINTEGRIT
YCAP

MOD
ENODEBINTEGRIT
ENodeBIntegrityCa Third integrity BTS3900, BTS3900 YCAP
ThirdIntegrityAlgo
p algorithm LTE LST
ENODEBINTEGRIT
YCAP
 MOD
ENODEBINTEGRIT
ENodeBIntegrityCa NULL Algorithm BTS3900, BTS3900 YCAP
NullAlgo
p config switch LTE LST
ENODEBINTEGRIT
YCAP

ADD
ENODEBUSIMEIS
VCFG
LST
ENODEBUSIMEIS
eNodeBUSImeisvCf BTS3900, BTS3900 VCFG
ImeisvTac IMEISV TAC
g LTE MOD
ENODEBUSIMEIS
VCFG
RMV
ENODEBUSIMEIS
VCFG

ADD
ENODEBUSIMEIS
VCFG
LST
ENODEBUSIMEIS
eNodeBUSImeisvCf BTS3900, BTS3900 VCFG
ImeisvSvn IMEISV SVN
g LTE MOD
ENODEBUSIMEIS
VCFG
RMV
ENODEBUSIMEIS
VCFG
 ADD
ENODEBUSIMEIS
VCFG
MOD
eNodeBUSImeisvCf Ue Type BTS3900, BTS3900
UeTypeDesc ENODEBUSIMEIS
g Description LTE
VCFG
LST
ENODEBUSIMEIS
VCFG

MOD
ENODEBUSPARA
US Ue Strategy BTS3900, BTS3900 CFG
eNodeBUSParaCfg UsStrategy
Select LTE LST
ENODEBUSPARA
CFG
 MOD
ENODEBUSPARA
Configurate US BTS3900, BTS3900 CFG
eNodeBUSParaCfg UsSPIDConfig
SPID LTE LST
ENODEBUSPARA
CFG

MOD
ENODEBUSPARA
US Ue Inactive BTS3900, BTS3900 CFG
eNodeBUSParaCfg UsUeInactiveTimer
Timer LTE LST
ENODEBUSPARA
CFG

MOD
ENODEBUSPARA
US IP Detect BTS3900, BTS3900 CFG
eNodeBUSParaCfg IPDetectInterval
Interval LTE LST
ENODEBUSPARA
CFG
 MOD
ENODEBUSPARA
US Downlink
UsUeDlPriorityFact BTS3900, BTS3900 CFG
eNodeBUSParaCfg scheduling priority
or LTE LST
factor
ENODEBUSPARA
CFG

MOD
ENODEBUSPARA
US Large Packet
UsLPktUlschPriFact BTS3900, BTS3900 CFG
eNodeBUSParaCfg UlSch Priority
or LTE LST
Factor
ENODEBUSPARA
CFG

MOD
ENODEBUSPARA
US Small Packet
UsSPktUlschPriFac BTS3900, BTS3900 CFG
eNodeBUSParaCfg UlSch Priority
tor LTE LST
Factor
ENODEBUSPARA
CFG
 MOD
ENODEBUSPARA
UsUESTMSIKeepAl US UE S-TMSI BTS3900, BTS3900 CFG
eNodeBUSParaCfg
iveTimer Keep Alive Timer LTE LST
ENODEBUSPARA
CFG
 MOD
ENODEBUSPARA
Big Package BTS3900, BTS3900 CFG
eNodeBUSParaCfg BigPackageIdentify
Identify LTE LST
ENODEBUSPARA
CFG

ADD
ENODEBUSTRAC
EIDCFG
LST
ENODEBUSTRAC
eNodeBUsTraceIdC BTS3900, BTS3900 EIDCFG
UsTraceIdIndex US Trace ID Index
fg LTE MOD
ENODEBUSTRAC
EIDCFG
RMV
ENODEBUSTRAC
EIDCFG
 ADD
ENODEBUSTRAC
EIDCFG
MOD
eNodeBUsTraceIdC BTS3900, BTS3900
UsTraceID US Trace ID ENODEBUSTRAC
fg LTE
EIDCFG
LST
ENODEBUSTRAC
EIDCFG

MOD
BTS3900, BTS3900 PDCPROHCPARA
PdcpRohcPara RohcSwitch ROHC switch
LTE LST
PDCPROHCPARA
 MOD
ROHC Highest BTS3900, BTS3900 PDCPROHCPARA
PdcpRohcPara HighestMode
mode LTE LST
PDCPROHCPARA
 MOD
Compression BTS3900, BTS3900 PDCPROHCPARA
PdcpRohcPara Profiles
profiles LTE LST
PDCPROHCPARA

ADD
PRIVATECABAND
COMB
DSP
PRIVATECABAND
COMB
LST
PrivateCaBandCom Private CA Band BTS3900, BTS3900
PrivateCaCombId PRIVATECABAND
b Combination ID LTE
COMB
MOD
PRIVATECABAND
COMB
RMV
PRIVATECABAND
COMB
 ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
Maximum
PrivateCaBandCom BTS3900, BTS3900 COMB
MaxAggregatedBw Aggregated
b LTE DSP
Bandwidth
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB

ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Bandwidth BTS3900, BTS3900 COMB
BwCombSetId
b Combination Set ID LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB
 ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Combination Band BTS3900, BTS3900 COMB
CombBand1Id
b 1 Band Identity LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB

ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Combination Band BTS3900, BTS3900 COMB
CombBand2Id
b 2 Band Identity LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB
 ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Combination Band BTS3900, BTS3900 COMB
CombBand3Id
b 3 Band Identity LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB

ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Combination Band BTS3900, BTS3900 COMB
CombBand4Id
b 4 Band Identity LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB
 ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Combination Band BTS3900, BTS3900 COMB
CombBand1Bw
b 1 Bandwidth LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB
 ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Combination Band BTS3900, BTS3900 COMB
CombBand2Bw
b 2 Bandwidth LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB
 ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Combination Band BTS3900, BTS3900 COMB
CombBand3Bw
b 3 Bandwidth LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB
 ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Combination Band BTS3900, BTS3900 COMB
CombBand4Bw
b 4 Bandwidth LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB

ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Combination Band BTS3900, BTS3900 COMB
CombBand5Id
b 5 Band Identity LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB
 ADD
PRIVATECABAND
COMB
MOD
PRIVATECABAND
PrivateCaBandCom Combination Band BTS3900, BTS3900 COMB
CombBand5Bw
b 5 Bandwidth LTE DSP
PRIVATECABAND
COMB
LST
PRIVATECABAND
COMB
 DSP
PrivateCaBandCom BTS3900, BTS3900
CombStatus Combination Status PRIVATECABAND
b LTE
COMB

MOD
RRCCONNSTATET
BTS3900, BTS3900 IMER
RrcConnStateTimer T302 Timer302
LTE LST
RRCCONNSTATET
IMER
 MOD
RRCCONNSTATET
T320ForLoadBalan Timer320 for load BTS3900, BTS3900 IMER
RrcConnStateTimer
ce balance LTE LST
RRCCONNSTATET
IMER

MOD
RRCCONNSTATET
Timer304 for BTS3900, BTS3900 IMER
RrcConnStateTimer T304ForEutran
EUTRAN LTE LST
RRCCONNSTATET
IMER
 MOD
RRCCONNSTATET
Timer304 for BTS3900, BTS3900 IMER
RrcConnStateTimer T304ForGeran
GERAN LTE LST
RRCCONNSTATET
IMER

MOD
RRCCONNSTATET
BTS3900, BTS3900 IMER
RrcConnStateTimer T320ForOther Timer320 for other
LTE LST
RRCCONNSTATET
IMER
 MOD
RRCCONNSTATET
BTS3900, BTS3900 IMER
RrcConnStateTimer UeInactiveTimer Ue inactive timer
LTE LST
RRCCONNSTATET
IMER
 MOD
RRCCONNSTATET
BTS3900, BTS3900 IMER
RrcConnStateTimer UlSynTimer Uplink Sync Timer
LTE LST
RRCCONNSTATET
IMER

MOD
RRCCONNSTATET
Filter Repeated
FilterReptRrcConn BTS3900, BTS3900 IMER
RrcConnStateTimer RRCConnReq
ReqTimer LTE LST
Timer
RRCCONNSTATET
IMER
 MOD
RRCCONNSTATET
UeInactivityTimerDy UE Inactivity Timer BTS3900, BTS3900 IMER
RrcConnStateTimer
nDrx Dynamic DRX LTE LST
RRCCONNSTATET
IMER
 MOD
RRCCONNSTATET
Uplink Sync Timer BTS3900, BTS3900 IMER
RrcConnStateTimer UlSynTimerDynDrx
Dynamic DRX LTE LST
RRCCONNSTATET
IMER
 MOD
RRCCONNSTATET
UeInactiveTimerQci Ue Inactive Timer BTS3900, BTS3900 IMER
RrcConnStateTimer
1 for Qci1 LTE LST
RRCCONNSTATET
IMER
 MOD
RRCCONNSTATET
UE Inactive Timer
UeInactTimerDynDr BTS3900, BTS3900 IMER
RrcConnStateTimer for QCI1 Dynamic
xQci1 LTE LST
DRX
RRCCONNSTATET
IMER
 SRB RLC
SrbRlcParaAdaptS BTS3900, BTS3900 MOD SRBCFG
SrbCfg Parameter Adaptive
witch LTE LST SRBCFG
Switch

SrbPollTimerAdjust SRB Polling Timer BTS3900, BTS3900 MOD SRBCFG

SrbCfg
Step Adjust Step LTE LST SRBCFG
 SRB Polling Timer
SrbPollTimerMaxAd BTS3900, BTS3900 MOD SRBCFG
SrbCfg Maximum Adjust
justValue LTE LST SRBCFG
Value
 SRB Polling Timer
SrbPollTimerAdjUse BTS3900, BTS3900 MOD SRBCFG
SrbCfg Adjust User
rNumThd LTE LST SRBCFG
Threshold

ADD
TCEIPMAPPING
LST
BTS3900, BTS3900 TCEIPMAPPING
TceIpMapping TceId TCE ID
LTE MOD
TCEIPMAPPING
RMV
TCEIPMAPPING

ADD
TCEIPMAPPING
BTS3900, BTS3900 MOD
TceIpMapping IPMode IP Mode
LTE TCEIPMAPPING
LST
TCEIPMAPPING
 ADD
TCEIPMAPPING
BTS3900, BTS3900 MOD
TceIpMapping TceIpV4Addr TCE IPv4 Address
LTE TCEIPMAPPING
LST
TCEIPMAPPING

ADD
TCEIPMAPPING
BTS3900, BTS3900 MOD
TceIpMapping TceIpV6Addr TCE IPv6 Address
LTE TCEIPMAPPING
LST
TCEIPMAPPING

MOD
ARP Schedule BTS3900, BTS3900 USERPRIORITY
UserPriority ArpSchSwitch
Switch LTE LST
USERPRIORITY
 MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp1Priority ARP1 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp2Priority ARP2 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp3Priority ARP3 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp4Priority ARP4 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp5Priority ARP5 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp6Priority ARP6 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp7Priority ARP7 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp8Priority ARP8 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp9Priority ARP9 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp10Priority ARP10 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp11Priority ARP11 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp12Priority ARP12 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp13Priority ARP13 Priority
LTE LST
USERPRIORITY
 MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp14Priority ARP14 Priority
LTE LST
USERPRIORITY
MOD
BTS3900, BTS3900 USERPRIORITY
UserPriority Arp15Priority ARP15 Priority
LTE LST
USERPRIORITY

LST
USERQCIPRIORIT
BTS3900, BTS3900 Y
UserQciPriority Qci QoS Class Identifier
LTE MOD
USERQCIPRIORIT
Y

MOD
USERQCIPRIORIT
Gold Uplink
GoldUlSchPriorityF BTS3900, BTS3900 Y
UserQciPriority Schedule Priority
actor LTE LST
Factor
USERQCIPRIORIT
Y

MOD
USERQCIPRIORIT
Gold Downlink
GoldDlSchPriorityF BTS3900, BTS3900 Y
UserQciPriority Schedule Priority
actor LTE LST
Factor
USERQCIPRIORIT
Y
 MOD
USERQCIPRIORIT
Silver Uplink
SilverUlSchPriorityF BTS3900, BTS3900 Y
UserQciPriority Schedule Priority
actor LTE LST
Factor
USERQCIPRIORIT
Y

MOD
USERQCIPRIORIT
Silver Downlink
SilverDlSchPriorityF BTS3900, BTS3900 Y
UserQciPriority Schedule Priority
actor LTE LST
Factor
USERQCIPRIORIT
Y

MOD
USERQCIPRIORIT
Bronze Uplink
BronzeUlSchPriority BTS3900, BTS3900 Y
UserQciPriority Schedule Priority
Factor LTE LST
Factor
USERQCIPRIORIT
Y

MOD
USERQCIPRIORIT
Bronze Downlink
BronzeDlSchPriority BTS3900, BTS3900 Y
UserQciPriority Schedule Priority
Factor LTE LST
Factor
USERQCIPRIORIT
Y
 ADD
X2AUTOSETUPOP
ERATOR
RMV
X2AutoSetupOpera Mobile country BTS3900, BTS3900
Mcc X2AUTOSETUPOP
tor code LTE
ERATOR
LST
X2AUTOSETUPOP
ERATOR

ADD
X2AUTOSETUPOP
ERATOR
RMV
X2AutoSetupOpera Mobile network BTS3900, BTS3900
Mnc X2AUTOSETUPOP
tor code LTE
ERATOR
LST
X2AUTOSETUPOP
ERATOR

BTS3900, BTS3900 LST CAMGTCFG

CaMgtCfg LocalCellId Local cell ID
LTE MOD CAMGTCFG

CarrAggrA2ThdRsr Carrier Aggregation BTS3900, BTS3900 MOD CAMGTCFG

CaMgtCfg
p A2 RSRP threshold LTE LST CAMGTCFG
 CarrAggrA4ThdRsr Carrier Aggregation BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg
p A4 RSRP threshold LTE LST CAMGTCFG

Carrier
BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg CarrierMgtSwitch Management
LTE LST CAMGTCFG
Switch
 CA Active Buffer BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg ActiveBufferLenThd
Length Threshold LTE LST CAMGTCFG

DeactiveBufferLenT CA Deactive Buffer BTS3900, BTS3900 MOD CAMGTCFG

CaMgtCfg
hd Length Threshold LTE LST CAMGTCFG
 ActiveBufferDelayT CA Active Buffer BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg
hd Delay Threshold LTE LST CAMGTCFG

CA Deactive
DeactiveThroughpu BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg Throughput
tThd LTE LST CAMGTCFG
Threshold
 Carrier Aggregation BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg CarrAggrA6Offset
A6 Offset LTE LST CAMGTCFG
 BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg SCellAgingTime SCell Aging Time
LTE LST CAMGTCFG
 CaA6ReportAmoun CA A6 Report BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg
t Amount LTE LST CAMGTCFG
 CA A6 Report BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg CaA6ReportInterval
Interval LTE LST CAMGTCFG
 SCC Deactive CQI BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg SccDeactCqiThd
Threshold LTE LST CAMGTCFG
 SCC Configuration BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg SccCfgInterval
Interval LTE LST CAMGTCFG
 Cell Level CA BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg CellCaAlgoSwitch
Algorithm Switch LTE LST CAMGTCFG

UlCaActiveTimeToT UL CA Time To BTS3900, BTS3900 MOD CAMGTCFG

CaMgtCfg
rigger Trigger LTE LST CAMGTCFG
 CA user AMBR BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg CaAmbrThd
Threshold LTE LST CAMGTCFG
 Measurement Cycle BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg MeasCycleSCell
of SCell LTE LST CAMGTCFG
 Cell Maximum PCC BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg CellMaxPccNumber
Number LTE LST CAMGTCFG
 Offload Threshold
PccUserNumberOffl BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg of PCC User
oadThd LTE LST CAMGTCFG
Number
 A1 RSRP
EnhancedPccAnch Threshold for BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg
orA1ThdRsrp Enhanced PCC LTE LST CAMGTCFG
Anchor
 Additional
BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg AddedMeasCfg Measurement
LTE LST CAMGTCFG
Configuration
 BlindScellSampleN Blind Scell Sample BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg
um Number LTE LST CAMGTCFG

BTS3900, BTS3900 MOD CAMGTCFG

CaMgtCfg OptMode Optimization Mode
LTE LST CAMGTCFG
 BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg SleepPeriod Sleep Period
LTE LST CAMGTCFG
 BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg StatPeriod Statistic Period
LTE LST CAMGTCFG
 Relaxed Backhaul
RelaxedBHSccDea BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg SCC Deactive CQI
ctCqiThd LTE LST CAMGTCFG
Threshold

Relaxed Backhaul
RelaxedBackhaulC BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg Ca Max Component
aMaxCcNum LTE LST CAMGTCFG
Carrier Number

Distribute Cloud BB
DisCloudBBCaMax BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg CA Max Component
CcNum LTE LST CAMGTCFG
Carrier Number
 CA A2 Time To BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg CaA2TimeToTrigger
Trigger LTE LST CAMGTCFG

CA A6 Time To BTS3900, BTS3900 MOD CAMGTCFG

CaMgtCfg CaA6TimeToTrigger
Trigger LTE LST CAMGTCFG
 CA A1 Time To BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg CaA1TimeToTrigger
Trigger LTE LST CAMGTCFG

CA A4 Time To BTS3900, BTS3900 MOD CAMGTCFG

CaMgtCfg CaA4TimeToTrigger
Trigger LTE LST CAMGTCFG
 BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg SccQuietTime SCC Quiet Time
LTE LST CAMGTCFG

FDD TDD Relaxed

FTRelaxedBHCaDL BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg BH CA DL Max CC
MaxCcNum LTE LST CAMGTCFG
Num

FddTddCaDlMaxCc FDD TDD CA DL BTS3900, BTS3900 MOD CAMGTCFG

CaMgtCfg
Num Max CC Number LTE LST CAMGTCFG
 FTCA2CCAnchorP Anchor Policy for BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg
olicy FDD and TDD 2CC LTE LST CAMGTCFG

Anchor Policy for

FTCAMultiCCAnch BTS3900, BTS3900 MOD CAMGTCFG
CaMgtCfg FDD and TDD Multi
orPolicy LTE LST CAMGTCFG
CC
 LST
CELLBFMIMOPAR
BTS3900, BTS3900 ACFG
CellBfMimoParaCfg LocalCellId Local cell ID
LTE MOD
CELLBFMIMOPAR
ACFG

MOD
CELLBFMIMOPAR
BfMimoAdaptiveSwi BfMIMO adaptive BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
tch switch LTE LST
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
Fixed BfMIMO BTS3900, BTS3900 ACFG
CellBfMimoParaCfg FixedBfMimoMode
mode LTE LST
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
BfMimoAdapWithou Bf Mimo Adaptive BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
tTm2 Without Tm2 LTE LST
CELLBFMIMOPAR
ACFG
 MOD
Single to Dual CELLBFMIMOPAR
BfSingleToDualThd Streaming BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
Offset Beamforming LTE LST
Threshold Offset CELLBFMIMOPAR
ACFG
 MOD
TM3 Rank2 To Dual CELLBFMIMOPAR
TM3Rank2ToDualBf Streaming BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
ThdOffset Beamforming LTE LST
Threshold Offset CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
AsUeDualBfToTM3 AS UE Dual BF To BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
Rank2Offset TM3 Rank2 Offset LTE LST
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
AsUeTM3Rank2To AS UE TM3 Rank2 BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
DualBfOffset To Dual BF Offset LTE LST
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
AsUeBfSingleToDu AS UE Single to BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
alOffset Dual BF Offset LTE LST
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
Dual Streaming
DualBfToTM3Rank2 BTS3900, BTS3900 ACFG
CellBfMimoParaCfg Beamforming To
Offset LTE LST
TM3 Rank2 Offset
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
Offset Of In BTS3900, BTS3900 ACFG
CellBfMimoParaCfg OffsetOfInStat
Statistics LTE LST
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
Offset Of Out BTS3900, BTS3900 ACFG
CellBfMimoParaCfg OffsetOfOutStat
Statistics LTE LST
CELLBFMIMOPAR
ACFG
 MOD
Antenna Type- CELLBFMIMOPAR
AntBasedBfMimoAl based BF and BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
goSelect MIMO Algo LTE LST
Selection CELLBFMIMOPAR
ACFG

MOD
CELLBFMIMOPAR
Tm3DirectToDualBf The Switch of Tm3 BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
Switch Direct to DualBF LTE LST
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
SccBfMimoAdaptive Scc Bf Mimo BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
Switch Adaptive Switch LTE LST
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
High and Low
HighLowSpeedUeT BTS3900, BTS3900 ACFG
CellBfMimoParaCfg Speed UE TM
hdOffset LTE LST
Switch Thld Offset
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
TmAccelerationSwit Transmission Mode BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
ch Acceleration Switch LTE LST
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
BfMimoAdapWithT BfMIMO Adaptive BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
m4Switch with TM4 LTE LST
CELLBFMIMOPAR
ACFG

MOD
CELLBFMIMOPAR
TM3 and TM9
Tm3AndTm9ThdOff BTS3900, BTS3900 ACFG
CellBfMimoParaCfg Switching
set LTE LST
Threshold Offset
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
BF to Two Layer
BfTo2LayerMubfTh BTS3900, BTS3900 ACFG
CellBfMimoParaCfg MUBF Threshold
dOffset LTE LST
Offset
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
BF to Four Layer
BfTo4LayerMubfTh BTS3900, BTS3900 ACFG
CellBfMimoParaCfg MUBF Threshold
dOffset LTE LST
Offset
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
Tm3Rank2ToTm9R TM3 Rank2 To TM9 BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
ank4Offset Rank4 Offset LTE LST
CELLBFMIMOPAR
ACFG
 MOD
CELLBFMIMOPAR
Tm9Rank4ToTm3R TM9 Rank4 To TM3 BTS3900, BTS3900 ACFG
CellBfMimoParaCfg
ank2Offset Rank2 Offset LTE LST
CELLBFMIMOPAR
ACFG

LST
CELLCQIADAPTIV
BTS3900, BTS3900 ECFG
CellCqiAdaptiveCfg LocalCellId Local Cell ID
LTE MOD
CELLCQIADAPTIV
ECFG
 MOD
CELLCQIADAPTIV
CQI Period BTS3900, BTS3900 ECFG
CellCqiAdaptiveCfg CqiPeriodAdaptive
Adaptive Switch LTE LST
CELLCQIADAPTIV
ECFG

MOD
CELLCQIADAPTIV
BTS3900, BTS3900 ECFG
CellCqiAdaptiveCfg UserCqiPeriod User CQI period
LTE LST
CELLCQIADAPTIV
ECFG
 MOD
CELLCQIADAPTIV
SimulAckNackAndC SimulAckNackAndC BTS3900, BTS3900 ECFG
CellCqiAdaptiveCfg
qiSwitch QI Config Switch LTE LST
CELLCQIADAPTIV
ECFG
 MOD
CELLCQIADAPTIV
HoAperiodicCqiCfg Handover Aperiodic BTS3900, BTS3900 ECFG
CellCqiAdaptiveCfg
Switch CQI Config Switch LTE LST
CELLCQIADAPTIV
ECFG

LST
CELLDLCOMPALG
BTS3900, BTS3900 O
CellDlCompAlgo LocalCellId LocalCellId
LTE MOD
CELLDLCOMPALG
O
 MOD
CELLDLCOMPALG
BTS3900, BTS3900 O
CellDlCompAlgo DlCompA3Offset DlCompA3Offset
LTE LST
CELLDLCOMPALG
O

LST
CELLDLPCPDSCH
BTS3900, BTS3900 PA
CellDlpcPdschPa LocalCellId Local cell ID
LTE MOD
CELLDLPCPDSCH
PA

MOD
CELLDLPCPDSCH
BTS3900, BTS3900 PA
CellDlpcPdschPa PdschPaAdjSwitch PA adjusting switch
LTE LST
CELLDLPCPDSCH
PA
 MOD
CELLDLPCPDSCH
PA for even power BTS3900, BTS3900 PA
CellDlpcPdschPa PaPcOff
distribution LTE LST
CELLDLPCPDSCH
PA

LST
BTS3900, BTS3900 CELLDRXPARA
CellDrxPara LocalCellId Local cell ID
LTE MOD
CELLDRXPARA
 MOD
FDD enter DRX BTS3900, BTS3900 CELLDRXPARA
CellDrxPara FddEnterDrxThd
threshold LTE LST
CELLDRXPARA
 MOD
FDD exit DRX BTS3900, BTS3900 CELLDRXPARA
CellDrxPara FddExitDrxThd
threshold LTE LST
CELLDRXPARA
 MOD
TDD enter DRX BTS3900, BTS3900 CELLDRXPARA
CellDrxPara TddEnterDrxThdUl
threshold Uplink LTE LST
CELLDRXPARA

MOD
TDD exit DRX BTS3900, BTS3900 CELLDRXPARA
CellDrxPara TddExitDrxThdUl
threshold Uplink LTE LST
CELLDRXPARA
 MOD
TDD enter DRX BTS3900, BTS3900 CELLDRXPARA
CellDrxPara TddEnterDrxThdDl
threshold Downlink LTE LST
CELLDRXPARA

MOD
TDD exit DRX BTS3900, BTS3900 CELLDRXPARA
CellDrxPara TddExitDrxThdDl
threshold Downlink LTE LST
CELLDRXPARA
 MOD
DataAmountStatTi Data amount BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
mer Statistic timer LTE LST
CELLDRXPARA

MOD
DRX Power Saving
TddPowerSaveMea BTS3900, BTS3900 CELLDRXPARA
CellDrxPara Measurement
sSwitch LTE LST
Switch
CELLDRXPARA

MOD
DRX Power Saving
TddPowerSaveStat BTS3900, BTS3900 CELLDRXPARA
CellDrxPara Measurement
Timer LTE LST
Period
CELLDRXPARA
 MOD
DRX Power Saving
TddPowerSavingEn BTS3900, BTS3900 CELLDRXPARA
CellDrxPara Measurement Enter
terDrxThd LTE LST
DRX Threshold
CELLDRXPARA

MOD
DRX Power Saving
TddPowerSavingEx BTS3900, BTS3900 CELLDRXPARA
CellDrxPara Measurement Exit
itDrxThd LTE LST
DRX Threshold
CELLDRXPARA
 MOD
LongDrxCycleUnsy UnSync Long DRX BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
nc Cycle LTE LST
CELLDRXPARA
 MOD
Cqi-Mask Config BTS3900, BTS3900 CELLDRXPARA
CellDrxPara CqiMask
Switch LTE LST
CELLDRXPARA
 MOD
OndurationTimerUn Onduration Timer BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
sync Unsync LTE LST
CELLDRXPARA
 MOD
DrxInactivityTimerU DRX Inactivity BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
nsync Timer Unsync LTE LST
CELLDRXPARA
 MOD
BTS3900, BTS3900 CELLDRXPARA
CellDrxPara DrxPolicyMode DRX Policy Mode
LTE LST
CELLDRXPARA
 MOD
DrxStartOffsetOptS DRX Start Offset BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
witch Optimization Switch LTE LST
CELLDRXPARA
 MOD
DrxRcvDtxProSwitc DRX Receive DTX BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
h Process Switch LTE LST
CELLDRXPARA
 MOD
DRX for
BTS3900, BTS3900 CELLDRXPARA
CellDrxPara DrxForMeasSwitch Measurement
LTE LST
Switch
CELLDRXPARA
 MOD
LongDrxCycleForM Long DRX Cycle for BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
eas Measurement LTE LST
CELLDRXPARA
 MOD
OnDurTimerForMea On Duration Timer BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
s for Measurement LTE LST
CELLDRXPARA
 MOD
DRX Inactivity
DrxInactTimerForM BTS3900, BTS3900 CELLDRXPARA
CellDrxPara Timer for
eas LTE LST
Measurement
CELLDRXPARA
 DRX MOD
DrxReTxTimerForM Retransmission BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
eas Timer for LTE LST
Measurement CELLDRXPARA

MOD
ShortDrxSwForMea Short DRX Switch BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
s for Measurement LTE LST
CELLDRXPARA
 MOD
ShortDrxCycleForM Short DRX Cycle BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
eas for Measurement LTE LST
CELLDRXPARA
 MOD
ShortCycleTimerFor Short Cycle Timer BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
Meas for Measurement LTE LST
CELLDRXPARA
 MOD
DrxSrDetectOptSwit SR Detect Optimize BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
ch Switch LTE LST
CELLDRXPARA
 MOD
DrxStartoffsetAdjust DRX StartOffset BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
SW Adjust Switch LTE LST
CELLDRXPARA
 MOD
Measurement DRX
MeasDrxSpecSchS BTS3900, BTS3900 CELLDRXPARA
CellDrxPara Special Schedule
witch LTE LST
Switch
CELLDRXPARA
 Coverage based MOD
CovGsmMeasDrxCf GSM Measurement BTS3900, BTS3900 CELLDRXPARA
CellDrxPara
gSwitch DRX Configure LTE LST
Switch CELLDRXPARA

LST
BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg LocalCellId Local cell ID
LTE MOD
CELLHOPARACFG
 MOD
BlindHO A1A2
BlindHoA1A2ThdRs BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg RSRP trigger
rp LTE LST
threshold
CELLHOPARACFG
 MOD
BlindHO A1A2
BlindHoA1A2ThdRs BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg RSRQ trigger
rq LTE LST
threshold
CELLHOPARACFG

MOD
High Speed
HighSpeedThreshol BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg Handover
d LTE LST
Threshold
CELLHOPARACFG
 MOD
Handover Mode BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg HoModeSwitch
switch LTE LST
CELLHOPARACFG

MOD
SRVCC Handover BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg SrvccHoOptSwitch
Optimization Switch LTE LST
CELLHOPARACFG
 MOD
Uplink Bad Quality
UlBadQualHoMcsT BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg Handover MCS
hd LTE LST
Threshold
CELLHOPARACFG
 MOD
Uplink Bad Quality
UlBadQualHoIblerT BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg Handover IBLER
hd LTE LST
Threshold
CELLHOPARACFG
 MOD
SpeedEvaluatedPer Speed Evaluated BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg
iod Period LTE LST
CELLHOPARACFG
 MOD
SpeedEvaluatedNu HO Num in Speed BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg
m Evaluated Period LTE LST
CELLHOPARACFG
 LTE To UTRAN MOD
L2UCsfbMRProMod CSFB BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg
e Measurement LTE LST
Processing Mode CELLHOPARACFG

MOD
CSFB
CsfbMRWaitingTim BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg Measurement
er LTE LST
Waiting Timer
CELLHOPARACFG
 MOD
Handover Algo BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg CellHoAlgoSwitch
Switch LTE LST
CELLHOPARACFG
 MOD
Speed Evaluated
SpeedEvaluatedNu BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg Number For Fast
mForFastUe LTE LST
UE
CELLHOPARACFG

MOD
Handover Use UE
HoUseInactiveTime BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg Inactive Timer
rSwitch LTE LST
Switch
CELLHOPARACFG
 MOD
HSCellSleepUserN High Speed Cell BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg
um Sleep User Number LTE LST
CELLHOPARACFG
 MOD
Low Speed Users
LowSpeedUsersSel BTS3900, BTS3900 CELLHOPARACFG
CellHoParaCfg Selection Protect
ProTimer LTE LST
Timer
CELLHOPARACFG

LST
CELLMIMOPARAC
BTS3900, BTS3900 FG
CellMimoParaCfg LocalCellId Local cell ID
LTE MOD
CELLMIMOPARAC
FG
 MOD
CELLMIMOPARAC
MimoAdaptiveSwitc MIMO Adaptive BTS3900, BTS3900 FG
CellMimoParaCfg
h Switch LTE LST
CELLMIMOPARAC
FG
 MOD
CELLMIMOPARAC
BTS3900, BTS3900 FG
CellMimoParaCfg FixedMimoMode Fixed MIMO Mode
LTE LST
CELLMIMOPARAC
FG
 MOD
CELLMIMOPARAC
BTS3900, BTS3900 FG
CellMimoParaCfg InitialMimoType Initial Mimo Type
LTE LST
CELLMIMOPARAC
FG

BTS3900, BTS3900 LST CELLMLBHO

CellMlbHo LocalCellId Local cell ID
LTE MOD CELLMLBHO
 IdleUeSelFreqStrat Idle UE Select BTS3900, BTS3900 MOD CELLMLBHO
CellMlbHo
egy Frequency Strategy LTE LST CELLMLBHO
 MlbHoInProtectMod Mlb Handover-in BTS3900, BTS3900 MOD CELLMLBHO
CellMlbHo
e Protect Mode LTE LST CELLMLBHO
 MlbHoInProtectTim Mlb Handover-in BTS3900, BTS3900 MOD CELLMLBHO
CellMlbHo
er Protect Timer LTE LST CELLMLBHO

InterFreq Mlb
InterFreqMlbHoInA BTS3900, BTS3900 MOD CELLMLBHO
CellMlbHo Handover-in A1
1ThdRsrp LTE LST CELLMLBHO
RSRP Thd
 InterFreq Mlb
InterFreqMlbHoInA BTS3900, BTS3900 MOD CELLMLBHO
CellMlbHo Handover-in A1
1ThdRsrq LTE LST CELLMLBHO
RSRQ Thd

InterFreq Mlb
InterFreqMlbHoInA BTS3900, BTS3900 MOD CELLMLBHO
CellMlbHo Handover-in A2
2ThdRsrp LTE LST CELLMLBHO
RSRP Thd
 InterFreq Mlb
InterFreqMlbHoInA BTS3900, BTS3900 MOD CELLMLBHO
CellMlbHo Handover-in A2
2ThdRsrq LTE LST CELLMLBHO
RSRQ Thd

Inter-RAT MLB BTS3900, BTS3900 MOD CELLMLBHO

CellMlbHo InterRatMlbStrategy
Strategy LTE LST CELLMLBHO
 MlbMatchOtherFeat MLB Match Other BTS3900, BTS3900 MOD CELLMLBHO
CellMlbHo
ureMode Feature Mode LTE LST CELLMLBHO

ADD
CELLOPHOCFG
LST
BTS3900, BTS3900 CELLOPHOCFG
CellOpHoCfg LocalCellId Local cell ID
LTE MOD
CELLOPHOCFG
RMV
CELLOPHOCFG

ADD
CELLOPHOCFG
LST
BTS3900, BTS3900 CELLOPHOCFG
CellOpHoCfg CnOperatorId CN Operator ID
LTE MOD
CELLOPHOCFG
RMV
CELLOPHOCFG
 ADD
CELLOPHOCFG
Highest Priority BTS3900, BTS3900 MOD
CellOpHoCfg InterRatHighestPri
InterRAT LTE CELLOPHOCFG
LST
CELLOPHOCFG

ADD
CELLOPHOCFG
Second Priority BTS3900, BTS3900 MOD
CellOpHoCfg InterRatSecondPri
InterRAT LTE CELLOPHOCFG
LST
CELLOPHOCFG
 ADD
CELLOPHOCFG
Lowest Priority BTS3900, BTS3900 MOD
CellOpHoCfg InterRatLowestPri
InterRAT LTE CELLOPHOCFG
LST
CELLOPHOCFG

ADD
CELLOPHOCFG
CSFB Highest
BTS3900, BTS3900 MOD
CellOpHoCfg IdleCsfbHighestPri Priority InterRAT for
LTE CELLOPHOCFG
Idle UE
LST
CELLOPHOCFG
 ADD
CELLOPHOCFG
CSFB Second
BTS3900, BTS3900 MOD
CellOpHoCfg IdleCsfbSecondPri Priority InterRAT for
LTE CELLOPHOCFG
Idle UE
LST
CELLOPHOCFG

ADD
CELLOPHOCFG
CSFB Lowest
BTS3900, BTS3900 MOD
CellOpHoCfg IdleCsfbLowestPri Priority InterRAT for
LTE CELLOPHOCFG
Idle UE
LST
CELLOPHOCFG
 ADD
CELLPREALLOCG
ROUP
LST
CELLPREALLOCG
BTS3900, BTS3900 ROUP
CellPreallocGroup LocalCellId Local cell ID
LTE MOD
CELLPREALLOCG
ROUP
RMV
CELLPREALLOCG
ROUP

ADD
CELLPREALLOCG
ROUP
LST
CELLPREALLOCG
Preallocation
PreallocationParaG BTS3900, BTS3900 ROUP
CellPreallocGroup Parameter Group
roupId LTE MOD
ID
CELLPREALLOCG
ROUP
RMV
CELLPREALLOCG
ROUP

ADD
CELLPREALLOCG
ROUP
MOD
Preallocation BTS3900, BTS3900
CellPreallocGroup PreallocationSwitch CELLPREALLOCG
Switch LTE
ROUP
LST
CELLPREALLOCG
ROUP
 ADD
CELLPREALLOCG
ROUP
MOD
SmartPreallocation Smart Preallocation BTS3900, BTS3900
CellPreallocGroup CELLPREALLOCG
Switch Switch LTE
ROUP
LST
CELLPREALLOCG
ROUP

ADD
CELLPREALLOCG
ROUP
MOD
PreallocationMinPer Minimal Period of BTS3900, BTS3900
CellPreallocGroup CELLPREALLOCG
iod Preallocation LTE
ROUP
LST
CELLPREALLOCG
ROUP
 ADD
CELLPREALLOCG
ROUP
MOD
Data Size of BTS3900, BTS3900
CellPreallocGroup PreallocationSize CELLPREALLOCG
Preallocation LTE
ROUP
LST
CELLPREALLOCG
ROUP

ADD
CELLPREALLOCG
ROUP
MOD
SmartPreallocation Smart Preallocation BTS3900, BTS3900
CellPreallocGroup CELLPREALLOCG
Duration Duration LTE
ROUP
LST
CELLPREALLOCG
ROUP

LST
CELLSRSADAPTIV
BTS3900, BTS3900 ECFG
CellSrsAdaptiveCfg LocalCellId Local Cell ID
LTE MOD
CELLSRSADAPTIV
ECFG
 MOD
CELLSRSADAPTIV
SRS Period BTS3900, BTS3900 ECFG
CellSrsAdaptiveCfg SrsPeriodAdaptive
Adaptive Switch LTE LST
CELLSRSADAPTIV
ECFG

MOD
CELLSRSADAPTIV
BTS3900, BTS3900 ECFG
CellSrsAdaptiveCfg UserSrsPeriod User SRS Period
LTE LST
CELLSRSADAPTIV
ECFG

LST
CELLUEMEASCON
CellUeMeasControl BTS3900, BTS3900 TROLCFG
LocalCellId Local cell ID
Cfg LTE MOD
CELLUEMEASCON
TROLCFG
 MOD
CELLUEMEASCON
Max Non-Intra Freq
CellUeMeasControl MaxNonIntraMeasO BTS3900, BTS3900 TROLCFG
Measurement
Cfg bjNum LTE LST
Object Number
CELLUEMEASCON
TROLCFG
 MOD
CELLUEMEASCON
Max EUTRAN FDD
CellUeMeasControl MaxEutranFddMea BTS3900, BTS3900 TROLCFG
Measure Freq
Cfg sFreqNum LTE LST
Number
CELLUEMEASCON
TROLCFG
 MOD
CELLUEMEASCON
Max EUTRAN TDD
CellUeMeasControl MaxEutranTddMea BTS3900, BTS3900 TROLCFG
Measure Freq
Cfg sFreqNum LTE LST
Number
CELLUEMEASCON
TROLCFG
 MOD
CELLUEMEASCON
Max UTRAN FDD
CellUeMeasControl MaxUtranFddMeas BTS3900, BTS3900 TROLCFG
Measure Freq
Cfg FreqNum LTE LST
Number
CELLUEMEASCON
TROLCFG
 MOD
CELLUEMEASCON
Max UTRAN TDD
CellUeMeasControl MaxUtranTddMeas BTS3900, BTS3900 TROLCFG
Measure Freq
Cfg FreqNum LTE LST
Number
CELLUEMEASCON
TROLCFG
 MOD
CELLUEMEASCON
Max GERAN
CellUeMeasControl MaxGeranMeasFre BTS3900, BTS3900 TROLCFG
Measure Freq
Cfg qNum LTE LST
Number
CELLUEMEASCON
TROLCFG

LST
CELLULCOMPALG
BTS3900, BTS3900 O
CellUlCompAlgo LocalCellId LocalCellId
LTE MOD
CELLULCOMPALG
O
 MOD
CELLULCOMPALG
BTS3900, BTS3900 O
CellUlCompAlgo UlCompA3Offset UlCompA3Offset
LTE LST
CELLULCOMPALG
O

MOD
CELLULCOMPALG
Sfn UL CoMP BTS3900, BTS3900 O
CellUlCompAlgo SfnUlCompThd
Threshold LTE LST
CELLULCOMPALG
O
 MOD
CELLULCOMPALG
UlCompA3OffsetFo RelaxedBH UL BTS3900, BTS3900 O
CellUlCompAlgo
rRelaxedBH CoMP A3 Offset LTE LST
CELLULCOMPALG
O

LST
BTS3900, BTS3900 CELLULPCDEDIC
CellUlpcDedic LocalCellId Local cell ID
LTE MOD
CELLULPCDEDIC

MOD
Delta-MCS enable BTS3900, BTS3900 CELLULPCDEDIC
CellUlpcDedic DeltaMcsEnabled
or disable indication LTE LST
CELLULPCDEDIC
 Power Offset of MOD
PSrsOffsetDeltaMc SRS When BTS3900, BTS3900 CELLULPCDEDIC
CellUlpcDedic
sDisable DeltaMcsEnabled LTE LST
Off CELLULPCDEDIC

Power Offset of MOD

PSrsOffsetDeltaMc SRS When BTS3900, BTS3900 CELLULPCDEDIC
CellUlpcDedic
sEnable DeltaMcsEnabled LTE LST
On CELLULPCDEDIC
 MOD
RSRP filtering BTS3900, BTS3900 CELLULPCDEDIC
CellUlpcDedic FilterRsrp
coefficient LTE LST
CELLULPCDEDIC

LST
BTS3900, BTS3900 DISTBASEDHO
DistBasedHO LocalCellId Local cell ID
LTE MOD
DISTBASEDHO

MOD
Distance-based
DistBasedMeasObj BTS3900, BTS3900 DISTBASEDHO
DistBasedHO Measurement
Type LTE LST
Object Type
DISTBASEDHO
 MOD
Distance-based
BTS3900, BTS3900 DISTBASEDHO
DistBasedHO DistBasedHOThd Handover
LTE LST
Threshold
DISTBASEDHO

ADD
DRXPARAGROUP
LST
BTS3900, BTS3900 DRXPARAGROUP
DrxParaGroup LocalCellId Local cell ID
LTE MOD
DRXPARAGROUP
RMV
DRXPARAGROUP

ADD
DRXPARAGROUP
LST
DRX parameter BTS3900, BTS3900 DRXPARAGROUP
DrxParaGroup DrxParaGroupId
group ID LTE MOD
DRXPARAGROUP
RMV
DRXPARAGROUP
 ADD
DRXPARAGROUP
BTS3900, BTS3900 MOD
DrxParaGroup EnterDrxSwitch Enter DRX Switch
LTE DRXPARAGROUP
LST
DRXPARAGROUP
 ADD
DRXPARAGROUP
BTS3900, BTS3900 MOD
DrxParaGroup OnDurationTimer On Duration Timer
LTE DRXPARAGROUP
LST
DRXPARAGROUP
 ADD
DRXPARAGROUP
DRX Inactivity BTS3900, BTS3900 MOD
DrxParaGroup DrxInactivityTimer
Timer LTE DRXPARAGROUP
LST
DRXPARAGROUP
 ADD
DRXPARAGROUP
DRX
BTS3900, BTS3900 MOD
DrxParaGroup DrxReTxTimer Retransmission
LTE DRXPARAGROUP
Timer
LST
DRXPARAGROUP
 ADD
DRXPARAGROUP
BTS3900, BTS3900 MOD
DrxParaGroup LongDrxCycle Long DRX Cycle
LTE DRXPARAGROUP
LST
DRXPARAGROUP

ADD
DRXPARAGROUP
Short-cycle DRX
BTS3900, BTS3900 MOD
DrxParaGroup SupportShortDrx supported
LTE DRXPARAGROUP
indication
LST
DRXPARAGROUP
 ADD
DRXPARAGROUP
BTS3900, BTS3900 MOD
DrxParaGroup ShortDrxCycle Short DRX Cycle
LTE DRXPARAGROUP
LST
DRXPARAGROUP
 ADD
DRXPARAGROUP
DRX Short Cycle BTS3900, BTS3900 MOD
DrxParaGroup DrxShortCycleTimer
Timer LTE DRXPARAGROUP
LST
DRXPARAGROUP

ADD
GERANINTERFAR
FCN
LST
GERANINTERFAR
BTS3900, BTS3900 FCN
GeranInterfArfcn LocalCellId Local cell ID
LTE MOD
GERANINTERFAR
FCN
RMV
GERANINTERFAR
FCN
 ADD
GERANINTERFAR
FCN
LST
GERANINTERFAR
Interference
InterfGeranCellBcc BTS3900, BTS3900 FCN
GeranInterfArfcn GERAN BCCH
hArfcn LTE MOD
ARFCN
GERANINTERFAR
FCN
RMV
GERANINTERFAR
FCN

ADD
GERANINTERFAR
FCN
Interference MOD
InterfGeranCarBan BTS3900, BTS3900
GeranInterfArfcn GERAN Frequency GERANINTERFAR
dInd LTE
Band Indicator FCN
LST
GERANINTERFAR
FCN

ADD
INTERRATHOCOM
MGROUP
LST
INTERRATHOCOM
InterRatHoCommGr BTS3900, BTS3900 MGROUP
LocalCellId Local cell ID
oup LTE MOD
INTERRATHOCOM
MGROUP
RMV
INTERRATHOCOM
MGROUP
 ADD
INTERRATHOCOM
MGROUP
LST
INTERRATHOCOM
InterRatHoCommGr InterRatHoCommGr InterRAT handover BTS3900, BTS3900 MGROUP
oup oupId common group ID LTE MOD
INTERRATHOCOM
MGROUP
RMV
INTERRATHOCOM
MGROUP

ADD
INTERRATHOCOM
MGROUP
MOD
InterRatHoCommGr InterRatHoA1A2Hy InterRAT A1A2 BTS3900, BTS3900
INTERRATHOCOM
oup st hysteresis LTE
MGROUP
LST
INTERRATHOCOM
MGROUP
 ADD
INTERRATHOCOM
MGROUP
MOD
InterRatHoCommGr InterRatHoA1A2Tim InterRAT A1A2 time BTS3900, BTS3900
INTERRATHOCOM
oup eToTrig to trigger LTE
MGROUP
LST
INTERRATHOCOM
MGROUP

ADD
INTERRATHOCOM
MGROUP
MOD
InterRatHoCommGr InterRatHoA1ThdR InterRAT A1 RSRP BTS3900, BTS3900
INTERRATHOCOM
oup srp trigger threshold LTE
MGROUP
LST
INTERRATHOCOM
MGROUP
 ADD
INTERRATHOCOM
MGROUP
MOD
InterRatHoCommGr InterRatHoA1ThdR InterRAT A1 RSRQ BTS3900, BTS3900
INTERRATHOCOM
oup srq trigger threshold LTE
MGROUP
LST
INTERRATHOCOM
MGROUP

ADD
INTERRATHOCOM
MGROUP
MOD
InterRatHoCommGr InterRatHoA2ThdR InterRAT A2 RSRP BTS3900, BTS3900
INTERRATHOCOM
oup srp trigger threshold LTE
MGROUP
LST
INTERRATHOCOM
MGROUP

ADD
INTERRATHOCOM
MGROUP
MOD
InterRatHoCommGr InterRatHoA2ThdR InterRAT A2 RSRQ BTS3900, BTS3900
INTERRATHOCOM
oup srq trigger threshold LTE
MGROUP
LST
INTERRATHOCOM
MGROUP
 ADD
INTERRATHOCOM
MGROUP
MOD
InterRatHoCommGr GERAN B2 RSRP BTS3900, BTS3900
GeranB2Thd1Rsrp INTERRATHOCOM
oup Threshold 1 LTE
MGROUP
LST
INTERRATHOCOM
MGROUP

ADD
INTERRATHOCOM
MGROUP
MOD
InterRatHoCommGr GERAN B2 RSRQ BTS3900, BTS3900
GeranB2Thd1Rsrq INTERRATHOCOM
oup Threshold 1 LTE
MGROUP
LST
INTERRATHOCOM
MGROUP
 ADD
INTERRATHOCOM
MGROUP
MOD
InterRatHoCommGr UTRAN B2 RSRP BTS3900, BTS3900
UtranB2Thd1Rsrp INTERRATHOCOM
oup Threshold 1 LTE
MGROUP
LST
INTERRATHOCOM
MGROUP

ADD
INTERRATHOCOM
MGROUP
MOD
InterRatHoCommGr UTRAN B2 RSRQ BTS3900, BTS3900
UtranB2Thd1Rsrq INTERRATHOCOM
oup Threshold 1 LTE
MGROUP
LST
INTERRATHOCOM
MGROUP
 ADD
INTERRATHOCDM
A1XRTTGROUP
LST
INTERRATHOCDM
InterRatHoCdma1x BTS3900, BTS3900 A1XRTTGROUP
LocalCellId Local cell ID
RttGroup LTE MOD
INTERRATHOCDM
A1XRTTGROUP
RMV
INTERRATHOCDM
A1XRTTGROUP

ADD
INTERRATHOCDM
A1XRTTGROUP
LST
InterRAT handover INTERRATHOCDM
InterRatHoCdma1x InterRatHoCdma1x to BTS3900, BTS3900 A1XRTTGROUP
RttGroup RttGroupId CDMA20001xRTT LTE MOD
group ID INTERRATHOCDM
A1XRTTGROUP
RMV
INTERRATHOCDM
A1XRTTGROUP
 ADD
INTERRATHOCDM
A1XRTTGROUP
CDMA20001XRTT MOD
InterRatHoCdma1x InterRatHoCdmaB1 BTS3900, BTS3900
handover INTERRATHOCDM
RttGroup Hyst LTE
hysteresis A1XRTTGROUP
LST
INTERRATHOCDM
A1XRTTGROUP

ADD
INTERRATHOCDM
A1XRTTGROUP
CoverageBased MOD
InterRatHoCdma1x InterRatHoCdmaB1 BTS3900, BTS3900
CDMA20001XRTT INTERRATHOCDM
RttGroup ThdPs LTE
trigger threshold A1XRTTGROUP
LST
INTERRATHOCDM
A1XRTTGROUP
 ADD
INTERRATHOCDM
A1XRTTGROUP
MOD
InterRatHoCdma1x InterRatHoCdmaB1 CDMA20001XRTT BTS3900, BTS3900
INTERRATHOCDM
RttGroup TimeToTrig time to trigger LTE
A1XRTTGROUP
LST
INTERRATHOCDM
A1XRTTGROUP

ADD
INTERRATHOCDM
A1XRTTGROUP
Load Service
MOD
InterRatHoCdma1x LdSvBasedHoCdm Based BTS3900, BTS3900
INTERRATHOCDM
RttGroup aB1ThdPs CDMA20001XRTT LTE
A1XRTTGROUP
trigger threshold
LST
INTERRATHOCDM
A1XRTTGROUP
 ADD
RLFTIMERCONST
GROUP
LST
RLFTIMERCONST
RlfTimerConstGrou BTS3900, BTS3900 GROUP
LocalCellId Local cell ID
p LTE MOD
RLFTIMERCONST
GROUP
RMV
RLFTIMERCONST
GROUP

ADD
RLFTIMERCONST
GROUP
LST
RLFTIMERCONST
RlfTimerConstGrou RlfTimerConstGrou RLF timer and BTS3900, BTS3900 GROUP
p pId constants group ID LTE MOD
RLFTIMERCONST
GROUP
RMV
RLFTIMERCONST
GROUP

ADD
RLFTIMERCONST
GROUP
MOD
RlfTimerConstGrou BTS3900, BTS3900
T301 Timer 301 RLFTIMERCONST
p LTE
GROUP
LST
RLFTIMERCONST
GROUP
 ADD
RLFTIMERCONST
GROUP
MOD
RlfTimerConstGrou BTS3900, BTS3900
T310 Timer 310 RLFTIMERCONST
p LTE
GROUP
LST
RLFTIMERCONST
GROUP

ADD
RLFTIMERCONST
GROUP
MOD
RlfTimerConstGrou BTS3900, BTS3900
T311 Timer 311 RLFTIMERCONST
p LTE
GROUP
LST
RLFTIMERCONST
GROUP

ADD
RLFTIMERCONST
GROUP
MOD
RlfTimerConstGrou BTS3900, BTS3900
N310 Constant N310 RLFTIMERCONST
p LTE
GROUP
LST
RLFTIMERCONST
GROUP
 ADD
RLFTIMERCONST
GROUP
MOD
RlfTimerConstGrou BTS3900, BTS3900
N311 Constant N311 RLFTIMERCONST
p LTE
GROUP
LST
RLFTIMERCONST
GROUP

ADD
CELLEXTENDEDQ
CI
LST
CELLEXTENDEDQ
BTS3900, BTS3900 CI
CellExtendedQci ExtendedQci Extended QCI
LTE MOD
CELLEXTENDEDQ
CI
RMV
CELLEXTENDEDQ
CI

ADD
CELLEXTENDEDQ
CI
LST
CELLEXTENDEDQ
BTS3900, BTS3900 CI
CellExtendedQci LocalCellId Local cell ID
LTE MOD
CELLEXTENDEDQ
CI
RMV
CELLEXTENDEDQ
CI

ADD
CELLEXTENDEDQ
CI
MOD
InterFreqHoGroupI Interfreq handover BTS3900, BTS3900
CellExtendedQci CELLEXTENDEDQ
d group ID LTE
CI
LST
CELLEXTENDEDQ
CI

ADD
CELLEXTENDEDQ
CI
InterRAT handover
MOD
InterRatHoCdma1x to BTS3900, BTS3900
CellExtendedQci CELLEXTENDEDQ
RttGroupId CDMA20001xRTT LTE
CI
group ID
LST
CELLEXTENDEDQ
CI
 ADD
CELLEXTENDEDQ
CI
InterRAT handover
MOD
InterRatHoCdmaHr to BTS3900, BTS3900
CellExtendedQci CELLEXTENDEDQ
pdGroupId CDMA2000HRPD LTE
CI
group ID
LST
CELLEXTENDEDQ
CI

ADD
CELLEXTENDEDQ
CI
MOD
InterRatHoCommGr InterRAT handover BTS3900, BTS3900
CellExtendedQci CELLEXTENDEDQ
oupId common group ID LTE
CI
LST
CELLEXTENDEDQ
CI

ADD
CELLEXTENDEDQ
CI
MOD
InterRatHoGeranGr InterRAT handover BTS3900, BTS3900
CellExtendedQci CELLEXTENDEDQ
oupId to GERAN group ID LTE
CI
LST
CELLEXTENDEDQ
CI

ADD
CELLEXTENDEDQ
CI
MOD
InterRatHoUtranGro InterRAT handover BTS3900, BTS3900
CellExtendedQci CELLEXTENDEDQ
upId to UTRAN Group ID LTE
CI
LST
CELLEXTENDEDQ
CI

ADD
CELLEXTENDEDQ
CI
MOD
IntraFreqHoGroupI Intrafreq handover BTS3900, BTS3900
CellExtendedQci CELLEXTENDEDQ
d group ID LTE
CI
LST
CELLEXTENDEDQ
CI
 ADD
CELLEXTENDEDQ
CI
MOD
DRX parameter BTS3900, BTS3900
CellExtendedQci DrxParaGroupId CELLEXTENDEDQ
group ID LTE
CI
LST
CELLEXTENDEDQ
CI

ADD
CELLEXTENDEDQ
CI
MOD
RlfTimerConstCfgIn RLF timer and BTS3900, BTS3900
CellExtendedQci CELLEXTENDEDQ
d constants indication LTE
CI
LST
CELLEXTENDEDQ
CI

ADD
CELLEXTENDEDQ
CI
MOD
RlfTimerConstGrou RLF timer and BTS3900, BTS3900
CellExtendedQci CELLEXTENDEDQ
pId constants group ID LTE
CI
LST
CELLEXTENDEDQ
CI

ADD
CELLEXTENDEDQ
CI
MOD
Traffic Release BTS3900, BTS3900
CellExtendedQci TrafficRelDelay CELLEXTENDEDQ
Delay LTE
CI
LST
CELLEXTENDEDQ
CI
 LST
CELLSTANDARDQ
BTS3900, BTS3900 CI
CellStandardQci LocalCellId Local cell ID
LTE MOD
CELLSTANDARDQ
CI

LST
CELLSTANDARDQ
QoS Class BTS3900, BTS3900 CI
CellStandardQci Qci
Indication LTE MOD
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
InterFreqHoGroupI Interfreq handover BTS3900, BTS3900 CI
CellStandardQci
d group ID LTE LST
CELLSTANDARDQ
CI

MOD
InterRAT handover CELLSTANDARDQ
InterRatHoCdma1x to BTS3900, BTS3900 CI
CellStandardQci
RttGroupId CDMA20001xRTT LTE LST
group ID CELLSTANDARDQ
CI

MOD
InterRAT handover CELLSTANDARDQ
InterRatHoCdmaHr to BTS3900, BTS3900 CI
CellStandardQci
pdGroupId CDMA2000HRPD LTE LST
group ID CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
InterRatHoCommGr InterRAT handover BTS3900, BTS3900 CI
CellStandardQci
oupId common group ID LTE LST
CELLSTANDARDQ
CI
 MOD
CELLSTANDARDQ
InterRatHoGeranGr InterRAT handover BTS3900, BTS3900 CI
CellStandardQci
oupId to GERAN group ID LTE LST
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
InterRatHoUtranGro InterRAT handover BTS3900, BTS3900 CI
CellStandardQci
upId to UTRAN Group ID LTE LST
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
IntraFreqHoGroupI Intrafreq handover BTS3900, BTS3900 CI
CellStandardQci
d group ID LTE LST
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
DRX parameter BTS3900, BTS3900 CI
CellStandardQci DrxParaGroupId
group ID LTE LST
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
BTS3900, BTS3900 CI
CellStandardQci SriPeriod SRI Period
LTE LST
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
RlfTimerConstCfgIn RLF timer and BTS3900, BTS3900 CI
CellStandardQci
d constants indication LTE LST
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
RlfTimerConstGrou RLF timer and BTS3900, BTS3900 CI
CellStandardQci
pId constants group ID LTE LST
CELLSTANDARDQ
CI
 MOD
CELLSTANDARDQ
Traffic Release BTS3900, BTS3900 CI
CellStandardQci TrafficRelDelay
Delay LTE LST
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
QCI priority for BTS3900, BTS3900 CI
CellStandardQci QciPriorityForHo
handover LTE LST
CELLSTANDARDQ
CI
 MOD
CELLSTANDARDQ
BTS3900, BTS3900 CI
CellStandardQci MlbQciGroupId Mlb Qci Group ID
LTE LST
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
Preallocation
PreallocationParaG BTS3900, BTS3900 CI
CellStandardQci Parameter Group
roupId LTE LST
ID
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
QCI Priority For BTS3900, BTS3900 CI
CellStandardQci QciPriorityForDrx
DRX LTE LST
CELLSTANDARDQ
CI
 MOD
CELLSTANDARDQ
QCI Algorithm BTS3900, BTS3900 CI
CellStandardQci QciAlgoSwitch
Switch LTE LST
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
QCI Eutran
QciEutranFreqRelat BTS3900, BTS3900 CI
CellStandardQci Frequency Relation
ionId LTE LST
ID
CELLSTANDARDQ
CI

MOD
CELLSTANDARDQ
QCI UTRAN
QciUtranFreqRelati BTS3900, BTS3900 CI
CellStandardQci Frequency Relation
onId LTE LST
ID
CELLSTANDARDQ
CI
 MOD
CELLSTANDARDQ
QCI GERAN
QciGeranFreqRelati BTS3900, BTS3900 CI
CellStandardQci Frequency Relation
onId LTE LST
ID
CELLSTANDARDQ
CI

ADD
INTERRATHOCDM
AHRPDGROUP
LST
INTERRATHOCDM
InterRatHoCdmaHr BTS3900, BTS3900 AHRPDGROUP
LocalCellId Local cell ID
pdGroup LTE MOD
INTERRATHOCDM
AHRPDGROUP
RMV
INTERRATHOCDM
AHRPDGROUP

ADD
INTERRATHOCDM
AHRPDGROUP
LST
InterRAT handover INTERRATHOCDM
InterRatHoCdmaHr InterRatHoCdmaHr to BTS3900, BTS3900 AHRPDGROUP
pdGroup pdGroupId CDMA2000HRPD LTE MOD
group ID INTERRATHOCDM
AHRPDGROUP
RMV
INTERRATHOCDM
AHRPDGROUP
 ADD
INTERRATHOCDM
AHRPDGROUP
CDMA2000HRPD MOD
InterRatHoCdmaHr InterRatHoCdmaB1 BTS3900, BTS3900
handover INTERRATHOCDM
pdGroup Hyst LTE
hysteresis AHRPDGROUP
LST
INTERRATHOCDM
AHRPDGROUP

ADD
INTERRATHOCDM
AHRPDGROUP
CoverageBased MOD
InterRatHoCdmaHr InterRatHoCdmaB1 BTS3900, BTS3900
CDMA2000HRPD INTERRATHOCDM
pdGroup ThdPs LTE
trigger threshold AHRPDGROUP
LST
INTERRATHOCDM
AHRPDGROUP
 ADD
INTERRATHOCDM
AHRPDGROUP
MOD
InterRatHoCdmaHr InterRatHoCdmaB1 CDMA2000HRPD BTS3900, BTS3900
INTERRATHOCDM
pdGroup TimeToTrig time to trigger LTE
AHRPDGROUP
LST
INTERRATHOCDM
AHRPDGROUP

ADD
INTERRATHOCDM
AHRPDGROUP
Load Service
MOD
InterRatHoCdmaHr LdSvBasedHoCdm Based BTS3900, BTS3900
INTERRATHOCDM
pdGroup aB1ThdPs CDMA2000HRPD LTE
AHRPDGROUP
trigger threshold
LST
INTERRATHOCDM
AHRPDGROUP
 ADD
INTERRATHOCDM
AHRPDGROUP
Cdma2000 HRPD
MOD
InterRatHoCdmaHr Cdma2000HrpdB2T Optimized BTS3900, BTS3900
INTERRATHOCDM
pdGroup hd1Rsrp handover B2 RSRP LTE
AHRPDGROUP
thld1
LST
INTERRATHOCDM
AHRPDGROUP

ADD
INTERRATHOCDM
AHRPDGROUP
Cdma2000 HRPD
MOD
InterRatHoCdmaHr Cdma2000HrpdB2T Optimized BTS3900, BTS3900
INTERRATHOCDM
pdGroup hd1Rsrq handover B2 RSRQ LTE
AHRPDGROUP
thld1
LST
INTERRATHOCDM
AHRPDGROUP

ADD
INTERRATHOCDM
AHRPDGROUP
Cdma2000 HRPD MOD
InterRatHoCdmaHr Cdma2000HrpdNon BTS3900, BTS3900
Non Optimized HO INTERRATHOCDM
pdGroup B2ThdRsrp LTE
B2 RSRP Thd AHRPDGROUP
LST
INTERRATHOCDM
AHRPDGROUP

ADD
INTERRATHOCDM
AHRPDGROUP
Cdma2000 HRPD MOD
InterRatHoCdmaHr Cdma2000HrpdNon BTS3900, BTS3900
Non Optimized HO INTERRATHOCDM
pdGroup B2ThdRsrq LTE
B2 RSRQ Thd AHRPDGROUP
LST
INTERRATHOCDM
AHRPDGROUP

ADD
QCIEUTRANRELA
TION
LST
QCIEUTRANRELA
QCIEUTRANRELA BTS3900, BTS3900 TION
LocalCellId Local cell ID
TION LTE MOD
QCIEUTRANRELA
TION
RMV
QCIEUTRANRELA
TION
 ADD
QCIEUTRANRELA
TION
LST
QCIEUTRANRELA
QCIEUTRANRELA BTS3900, BTS3900 TION
DlEarfcn Downlink EARFCN
TION LTE MOD
QCIEUTRANRELA
TION
RMV
QCIEUTRANRELA
TION

ADD
QCIEUTRANRELA
TION
LST
QCIEUTRANRELA
QCI Eutran
QCIEUTRANRELA QciEutranFreqRelat BTS3900, BTS3900 TION
Frequency Relation
TION ionId LTE MOD
ID
QCIEUTRANRELA
TION
RMV
QCIEUTRANRELA
TION

ADD
QCIEUTRANRELA
TION
MOD
QCIEUTRANRELA Mobility Target BTS3900, BTS3900
MobilityTargetInd QCIEUTRANRELA
TION Indicator LTE
TION
LST
QCIEUTRANRELA
TION
 ADD
QCIGERANRELATI
ON
LST
QCIGERANRELATI
QCIGERANRELATI BTS3900, BTS3900 ON
LocalCellId Local cell ID
ON LTE MOD
QCIGERANRELATI
ON
RMV
QCIGERANRELATI
ON

ADD
QCIGERANRELATI
ON
LST
QCIGERANRELATI
QCIGERANRELATI BTS3900, BTS3900 ON
BcchGroupId BCCH Group ID
ON LTE MOD
QCIGERANRELATI
ON
RMV
QCIGERANRELATI
ON

ADD
QCIGERANRELATI
ON
LST
QCIGERANRELATI
QCI GERAN
QCIGERANRELATI QciGeranFreqRelati BTS3900, BTS3900 ON
Frequency Relation
ON onId LTE MOD
ID
QCIGERANRELATI
ON
RMV
QCIGERANRELATI
ON
 ADD
QCIGERANRELATI
ON
MOD
QCIGERANRELATI Mobility Target BTS3900, BTS3900
MobilityTargetInd QCIGERANRELATI
ON Indicator LTE
ON
LST
QCIGERANRELATI
ON

ADD
QCIUTRANRELATI
ON
LST
QCIUTRANRELATI
QCIUTRANRELATI BTS3900, BTS3900 ON
LocalCellId Local cell ID
ON LTE MOD
QCIUTRANRELATI
ON
RMV
QCIUTRANRELATI
ON

ADD
QCIUTRANRELATI
ON
LST
QCIUTRANRELATI
QCIUTRANRELATI UTRAN Downlink BTS3900, BTS3900 ON
UtranDlArfcn
ON EARFCN LTE MOD
QCIUTRANRELATI
ON
RMV
QCIUTRANRELATI
ON
 ADD
QCIUTRANRELATI
ON
LST
QCIUTRANRELATI
QCI UTRAN
QCIUTRANRELATI QciUtranFreqRelati BTS3900, BTS3900 ON
Frequency Relation
ON onId LTE MOD
ID
QCIUTRANRELATI
ON
RMV
QCIUTRANRELATI
ON

ADD
QCIUTRANRELATI
ON
MOD
QCIUTRANRELATI Mobility Target BTS3900, BTS3900
MobilityTargetInd QCIUTRANRELATI
ON Indicator LTE
ON
LST
QCIUTRANRELATI
ON

ADD
INTERRATHOGER
ANGROUP
LST
INTERRATHOGER
InterRatHoGeranGr BTS3900, BTS3900 ANGROUP
LocalCellId Local cell ID
oup LTE MOD
INTERRATHOGER
ANGROUP
RMV
INTERRATHOGER
ANGROUP
 ADD
INTERRATHOGER
ANGROUP
LST
INTERRATHOGER
InterRatHoGeranGr InterRatHoGeranGr InterRAT handover BTS3900, BTS3900 ANGROUP
oup oupId to GERAN group ID LTE MOD
INTERRATHOGER
ANGROUP
RMV
INTERRATHOGER
ANGROUP

ADD
INTERRATHOGER
ANGROUP
MOD
InterRatHoGeranGr InterRatHoGeranB1 GERAN handover BTS3900, BTS3900
INTERRATHOGER
oup Hyst hysteresis LTE
ANGROUP
LST
INTERRATHOGER
ANGROUP
 ADD
INTERRATHOGER
ANGROUP
CoverageBased MOD
InterRatHoGeranGr InterRatHoGeranB1 BTS3900, BTS3900
GERAN trigger INTERRATHOGER
oup Thd LTE
threshold ANGROUP
LST
INTERRATHOGER
ANGROUP

ADD
INTERRATHOGER
ANGROUP
MOD
InterRatHoGeranGr InterRatHoGeranB1 GERAN time to BTS3900, BTS3900
INTERRATHOGER
oup TimeToTrig trigger LTE
ANGROUP
LST
INTERRATHOGER
ANGROUP
 ADD
INTERRATHOGER
ANGROUP
Load Service
MOD
InterRatHoGeranGr LdSvBasedHoGera Based Geran BTS3900, BTS3900
INTERRATHOGER
oup nB1Thd EventB1 trigger LTE
ANGROUP
threshold
LST
INTERRATHOGER
ANGROUP

ADD
INTERRATHOUTR
ANGROUP
LST
INTERRATHOUTR
InterRatHoUtranGro BTS3900, BTS3900 ANGROUP
LocalCellId Local cell ID
up LTE MOD
INTERRATHOUTR
ANGROUP
RMV
INTERRATHOUTR
ANGROUP

ADD
INTERRATHOUTR
ANGROUP
LST
INTERRATHOUTR
InterRatHoUtranGro InterRatHoUtranGro InterRAT handover BTS3900, BTS3900 ANGROUP
up upId to UTRAN Group ID LTE MOD
INTERRATHOUTR
ANGROUP
RMV
INTERRATHOUTR
ANGROUP
 ADD
INTERRATHOUTR
ANGROUP
CoverageBased MOD
InterRatHoUtranGro InterRatHoUtranB1 BTS3900, BTS3900
UTRAN ECN0 INTERRATHOUTR
up ThdEcn0 LTE
trigger threshold ANGROUP
LST
INTERRATHOUTR
ANGROUP

ADD
INTERRATHOUTR
ANGROUP
CoverageBased MOD
InterRatHoUtranGro InterRatHoUtranB1 BTS3900, BTS3900
UTRAN RSCP INTERRATHOUTR
up ThdRscp LTE
trigger threshold ANGROUP
LST
INTERRATHOUTR
ANGROUP
 ADD
INTERRATHOUTR
ANGROUP
MOD
InterRatHoUtranGro InterRatHoUtranB1 UTRAN handover BTS3900, BTS3900
INTERRATHOUTR
up Hyst hysteresis LTE
ANGROUP
LST
INTERRATHOUTR
ANGROUP
 ADD
INTERRATHOUTR
ANGROUP
MOD
InterRatHoUtranGro InterRatHoUtranB1 UTRAN time to BTS3900, BTS3900
INTERRATHOUTR
up TimeToTrig trigger LTE
ANGROUP
LST
INTERRATHOUTR
ANGROUP
 ADD
INTERRATHOUTR
ANGROUP
Load Service MOD
InterRatHoUtranGro LdSvBasedHoUtran BTS3900, BTS3900
Based UTRANB1 INTERRATHOUTR
up B1ThdEcn0 LTE
ECN0 threshold ANGROUP
LST
INTERRATHOUTR
ANGROUP

ADD
INTERRATHOUTR
ANGROUP
Load Service
MOD
InterRatHoUtranGro LdSvBasedHoUtran Based UTRAN BTS3900, BTS3900
INTERRATHOUTR
up B1ThdRscp EventB1 RSCP LTE
ANGROUP
trigger threshold
LST
INTERRATHOUTR
ANGROUP
 ADD
CAGROUPSCELLC
FG
LST
CAGROUPSCELLC
BTS3900, BTS3900 FG
CaGroupSCellCfg LocalCellId Local cell ID
LTE MOD
CAGROUPSCELLC
FG
RMV
CAGROUPSCELLC
FG

ADD
CAGROUPSCELLC
FG
LST
CAGROUPSCELLC
BTS3900, BTS3900 FG
CaGroupSCellCfg SCelleNodeBId SCell eNodeB ID
LTE MOD
CAGROUPSCELLC
FG
RMV
CAGROUPSCELLC
FG
 ADD
CAGROUPSCELLC
FG
LST
CAGROUPSCELLC
BTS3900, BTS3900 FG
CaGroupSCellCfg SCellLocalCellId SCell Local Cell ID
LTE MOD
CAGROUPSCELLC
FG
RMV
CAGROUPSCELLC
FG

ADD
CAGROUPSCELLC
FG
MOD
SCell Blind BTS3900, BTS3900
CaGroupSCellCfg SCellBlindCfgFlag CAGROUPSCELLC
Configuration Flag LTE
FG
LST
CAGROUPSCELLC
FG
 ADD
CAGROUPSCELLC
FG
MOD
BTS3900, BTS3900
CaGroupSCellCfg SCellPriority SCell Priority CAGROUPSCELLC
LTE
FG
LST
CAGROUPSCELLC
FG

ADD
CAGROUPSCELLC
FG
MOD
BTS3900, BTS3900
CaGroupSCellCfg SCellA4Offset SCell A4 Offset CAGROUPSCELLC
LTE
FG
LST
CAGROUPSCELLC
FG
 ADD
CAGROUPSCELLC
FG
MOD
BTS3900, BTS3900
CaGroupSCellCfg SCellA2Offset SCell A2 Offset CAGROUPSCELLC
LTE
FG
LST
CAGROUPSCELLC
FG

ADD
CAGROUPSCELLC
FG
MOD
BTS3900, BTS3900
CaGroupSCellCfg SpidGrpId SPID Group ID CAGROUPSCELLC
LTE
FG
LST
CAGROUPSCELLC
FG
 LST CELLMCPARA
BTS3900, BTS3900
CellMcPara LocalCellId Local cell ID MOD
LTE
CELLMCPARA

MOD
BTS3900, BTS3900
CellMcPara A3Offset A3 Offset CELLMCPARA
LTE
LST CELLMCPARA

MOD
BTS3900, BTS3900
CellMcPara Hysteresis Hysteresis CELLMCPARA
LTE
LST CELLMCPARA
 MOD
BTS3900, BTS3900
CellMcPara TimetoTrigger Time to Trigger CELLMCPARA
LTE
LST CELLMCPARA

MOD
Max Report Cell BTS3900, BTS3900
CellMcPara MaxReportCells CELLMCPARA
Number LTE
LST CELLMCPARA
 MOD
BTS3900, BTS3900
CellMcPara ReportAmount Report Amount CELLMCPARA
LTE
LST CELLMCPARA

MOD
BTS3900, BTS3900
CellMcPara ReportInterval Report Interval CELLMCPARA
LTE
LST CELLMCPARA
 MOD
BTS3900, BTS3900
CellMcPara ReportQuantity Reoprt Quantity CELLMCPARA
LTE
LST CELLMCPARA

MOD
BTS3900, BTS3900
CellMcPara TriggerQuantity Trigger Quantity CELLMCPARA
LTE
LST CELLMCPARA
 MOD
BTS3900, BTS3900
CellMcPara A6Offset A6 Offset CELLMCPARA
LTE
LST CELLMCPARA

IntraFreq Period MOD

IntraFreqMaxReport BTS3900, BTS3900
CellMcPara MR Max Report CELLMCPARA
Cells LTE
Cell LST CELLMCPARA
 MOD
IntraFreqTriggerQu IntraFreq Period BTS3900, BTS3900
CellMcPara CELLMCPARA
antity MR Trigger Quantity LTE
LST CELLMCPARA
 MOD
IntraFreqReportQu IntraFreq Period BTS3900, BTS3900
CellMcPara CELLMCPARA
antity MR Report Quantity LTE
LST CELLMCPARA
 InterFreq Period MOD
InterFreqMaxReport BTS3900, BTS3900
CellMcPara MR Max Report CELLMCPARA
Cells LTE
Cell LST CELLMCPARA

MOD
InterFreqTriggerQu InterFreq Period BTS3900, BTS3900
CellMcPara CELLMCPARA
antity MR Trigger Quantity LTE
LST CELLMCPARA
 MOD
InterFreqReportQu InterFreq Period BTS3900, BTS3900
CellMcPara CELLMCPARA
antity MR Report Quantity LTE
LST CELLMCPARA
 A3 Measurement MOD
A3MCAdaptiveSwit BTS3900, BTS3900
CellMcPara Control Adaptive CELLMCPARA
ch LTE
Switch LST CELLMCPARA

ADD
INTERFREQHOGR
OUP
LST
INTERFREQHOGR
BTS3900, BTS3900 OUP
InterFreqHoGroup LocalCellId Local cell ID
LTE MOD
INTERFREQHOGR
OUP
RMV
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
LST
INTERFREQHOGR
InterFreqHoGroupI Interfreq handover BTS3900, BTS3900 OUP
InterFreqHoGroup
d group ID LTE MOD
INTERFREQHOGR
OUP
RMV
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
MOD
InterFreqHoA1A2H Interfreq A1A2 BTS3900, BTS3900
InterFreqHoGroup INTERFREQHOGR
yst hysteresis LTE
OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
MOD
InterFreqHoA1A2Ti Interfreq A1A2 time BTS3900, BTS3900
InterFreqHoGroup INTERFREQHOGR
meToTrig to trigger LTE
OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
A4A5 Based MOD
InterFreqHoA1Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq A1 RSRP INTERFREQHOGR
Rsrp LTE
Threshold OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
A4A5 Based MOD
InterFreqHoA1Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq A1 RSRQ INTERFREQHOGR
Rsrq LTE
Threshold OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
A4A5 Based MOD
InterFreqHoA2Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq A2 RSRP INTERFREQHOGR
Rsrp LTE
Threshold OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
A4A5 Based MOD
InterFreqHoA2Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq A2 RSRQ INTERFREQHOGR
Rsrq LTE
Threshold OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
MOD
Interfreq handover BTS3900, BTS3900
InterFreqHoGroup InterFreqHoA4Hyst INTERFREQHOGR
hysteresis LTE
OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
CoverageBased MOD
InterFreqHoA4Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq RSRP INTERFREQHOGR
Rsrp LTE
threshold OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
CoverageBased MOD
InterFreqHoA4Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq RSRQ INTERFREQHOGR
Rsrq LTE
threshold OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
MOD
InterFreqHoA4Time Interfreq HandOver BTS3900, BTS3900
InterFreqHoGroup INTERFREQHOGR
ToTrig Time to Trigger LTE
OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
Load Based MOD
InterFreqLoadBase BTS3900, BTS3900
InterFreqHoGroup Interfreq RSRP INTERFREQHOGR
dHoA4ThdRsrp LTE
threshold OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
Load Based MOD
InterFreqLoadBase BTS3900, BTS3900
InterFreqHoGroup Interfreq RSRQ INTERFREQHOGR
dHoA4ThdRsrq LTE
threshold OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
Freq Priority Based MOD
FreqPriInterFreqHo BTS3900, BTS3900
InterFreqHoGroup Interfreq A1 RSRP INTERFREQHOGR
A1ThdRsrp LTE
threshold OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
Freq Priority Based MOD
FreqPriInterFreqHo BTS3900, BTS3900
InterFreqHoGroup Interfreq A1 RSRQ INTERFREQHOGR
A1ThdRsrq LTE
threshold OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
MOD
InterFreqHoA3Offse BTS3900, BTS3900
InterFreqHoGroup Interfreq A3 offset INTERFREQHOGR
t LTE
OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
MOD
A3InterFreqHoA1T A3 based interfreq BTS3900, BTS3900
InterFreqHoGroup INTERFREQHOGR
hdRsrp A1 RSRP threshold LTE
OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
MOD
A3InterFreqHoA2T A3 based Interfreq BTS3900, BTS3900
InterFreqHoGroup INTERFREQHOGR
hdRsrp A2 RSRP threshold LTE
OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
Freq Priority Based MOD
FreqPriInterFreqHo BTS3900, BTS3900
InterFreqHoGroup Interfreq A2 RSRP INTERFREQHOGR
A2ThdRsrp LTE
threshold OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
Freq Priority Based MOD
FreqPriInterFreqHo BTS3900, BTS3900
InterFreqHoGroup Interfreq A2 RSRQ INTERFREQHOGR
A2ThdRsrq LTE
threshold OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
InterFreq MLB MOD
InterFreqMlbA1A2T BTS3900, BTS3900
InterFreqHoGroup A1A2 RSRP INTERFREQHOGR
hdRsrp LTE
Threshold OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
MOD
InterFreqHoA5Thd1 Interfreq A5 RSRP BTS3900, BTS3900
InterFreqHoGroup INTERFREQHOGR
Rsrp threshold 1 LTE
OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
MOD
InterFreqHoA5Thd1 Interfreq A5 RSRQ BTS3900, BTS3900
InterFreqHoGroup INTERFREQHOGR
Rsrq threshold 1 LTE
OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
Service-Request MOD
SrvReqHoA4ThdRs BTS3900, BTS3900
InterFreqHoGroup based handover A4 INTERFREQHOGR
rp LTE
RSRP threshold OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
Service-Request MOD
SrvReqHoA4ThdRs BTS3900, BTS3900
InterFreqHoGroup based handover A4 INTERFREQHOGR
rq LTE
RSRQ threshold OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
MLB Inter-Freq MOD
MlbInterFreqHoA5T BTS3900, BTS3900
InterFreqHoGroup Handover A5 INTERFREQHOGR
hd1Rsrp LTE
Threshold1 RSRP OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
MLB Inter-Freq MOD
MlbInterFreqHoA5T BTS3900, BTS3900
InterFreqHoGroup Handover A5 INTERFREQHOGR
hd1Rsrq LTE
Threshold1 RSRQ OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
MOD
UlBadQualHoA4Off Uplink Bad Quality BTS3900, BTS3900
InterFreqHoGroup INTERFREQHOGR
set Handover A4 Offset LTE
OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
A3 Based Interfreq MOD
A3InterFreqHoA1T BTS3900, BTS3900
InterFreqHoGroup A1 RSRQ INTERFREQHOGR
hdRsrq LTE
Threshold OUP
LST
INTERFREQHOGR
OUP
 ADD
INTERFREQHOGR
OUP
A3 Based Interfreq MOD
A3InterFreqHoA2T BTS3900, BTS3900
InterFreqHoGroup A2 RSRQ INTERFREQHOGR
hdRsrq LTE
Threshold OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
Ul High Traffic MOD
UlHeavyTrafficMlbA BTS3900, BTS3900
InterFreqHoGroup Handover A4 INTERFREQHOGR
4ThdRsrp LTE
Threshold of RSRP OUP
LST
INTERFREQHOGR
OUP

ADD
INTERFREQHOGR
OUP
Ul High Traffic MOD
UlHeavyTrafficMlbA BTS3900, BTS3900
InterFreqHoGroup Handover A4 INTERFREQHOGR
4ThdRsrq LTE
Threshold of RSRQ OUP
LST
INTERFREQHOGR
OUP
 ADD
INTRAFREQHOGR
OUP
LST
INTRAFREQHOGR
BTS3900, BTS3900 OUP
IntraFreqHoGroup LocalCellId Local cell ID
LTE MOD
INTRAFREQHOGR
OUP
RMV
INTRAFREQHOGR
OUP

ADD
INTRAFREQHOGR
OUP
LST
INTRAFREQHOGR
IntraFreqHoGroupI Intrafreq handover BTS3900, BTS3900 OUP
IntraFreqHoGroup
d group ID LTE MOD
INTRAFREQHOGR
OUP
RMV
INTRAFREQHOGR
OUP

ADD
INTRAFREQHOGR
OUP
MOD
Intrafreq handover BTS3900, BTS3900
IntraFreqHoGroup IntraFreqHoA3Hyst INTRAFREQHOGR
hysteresis LTE
OUP
LST
INTRAFREQHOGR
OUP
 ADD
INTRAFREQHOGR
OUP
MOD
IntraFreqHoA3Offse Intrafreq handover BTS3900, BTS3900
IntraFreqHoGroup INTRAFREQHOGR
t offset LTE
OUP
LST
INTRAFREQHOGR
OUP

ADD
INTRAFREQHOGR
OUP
MOD
IntraFreqHoA3Time Intrafreq handover BTS3900, BTS3900
IntraFreqHoGroup INTRAFREQHOGR
ToTrig time to trigger LTE
OUP
LST
INTRAFREQHOGR
OUP
 LST
ENBCELLQCIRSV
eNBCellQciRsvdPa BTS3900, BTS3900 DPARA
LocalCellId Local cell ID
ra LTE MOD
ENBCELLQCIRSV
DPARA

LST
ENBCELLQCIRSV
eNBCellQciRsvdPa QoS Class BTS3900, BTS3900 DPARA
Qci
ra Indication LTE MOD
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved Switch BTS3900, BTS3900 DPARA
RsvdSwPara0
ra Parameter 0 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved Switch BTS3900, BTS3900 DPARA
RsvdSwPara1
ra Parameter 1 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved Switch BTS3900, BTS3900 DPARA
RsvdSwPara2
ra Parameter 2 LTE LST
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara2
ra Parameter 2 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara3
ra Parameter 3 LTE LST
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara4
ra Parameter 4 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara5
ra Parameter 5 LTE LST
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara6
ra Parameter 6 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara7
ra Parameter 7 LTE LST
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara8
ra Parameter 8 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara9
ra Parameter 9 LTE LST
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara10
ra Parameter 10 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara11
ra Parameter 11 LTE LST
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara12
ra Parameter 12 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara13
ra Parameter 13 LTE LST
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara14
ra Parameter 14 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara15
ra Parameter 15 LTE LST
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara16
ra Parameter 16 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara17
ra Parameter 17 LTE LST
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara18
ra Parameter 18 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara19
ra Parameter 19 LTE LST
ENBCELLQCIRSV
DPARA

MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara20
ra Parameter 20 LTE LST
ENBCELLQCIRSV
DPARA
 MOD
ENBCELLQCIRSV
eNBCellQciRsvdPa Reserved BTS3900, BTS3900 DPARA
RsvdPara21
ra Parameter 21 LTE LST
ENBCELLQCIRSV
DPARA

ADD
CNOPERATOR
LST
BTS3900, BTS3900 CNOPERATOR
CnOperator CnOperatorId CN Operator ID
LTE MOD
CNOPERATOR
RMV
CNOPERATOR

ADD
CNOPERATOR
BTS3900, BTS3900 MOD
CnOperator CnOperatorName CN Operator name
LTE CNOPERATOR
LST
CNOPERATOR

ADD
CNOPERATOR
BTS3900, BTS3900 MOD
CnOperator CnOperatorType CN Operator type
LTE CNOPERATOR
LST
CNOPERATOR
 ADD
CNOPERATOR
Mobile country BTS3900, BTS3900 MOD
CnOperator Mcc
code LTE CNOPERATOR
LST
CNOPERATOR

ADD
CNOPERATOR
Mobile network BTS3900, BTS3900 MOD
CnOperator Mnc
code LTE CNOPERATOR
LST
CNOPERATOR

ADD
CNOPERATORIPP
ATH
LST
CNOPERATORIPP
BTS3900, BTS3900 ATH
CnOperatorIpPath IpPathId IP path ID
LTE MOD
CNOPERATORIPP
ATH
RMV
CNOPERATORIPP
ATH

ADD
CNOPERATORIPP
ATH
MOD
BTS3900, BTS3900
CnOperatorIpPath CnOperatorId CN Operator ID CNOPERATORIPP
LTE
ATH
LST
CNOPERATORIPP
ATH
 ADD
CNOPERATORTA
LST
Local tracking area BTS3900, BTS3900 CNOPERATORTA
CnOperatorTa TrackingAreaId
ID LTE MOD
CNOPERATORTA
RMV
CNOPERATORTA

ADD
CNOPERATORTA
BTS3900, BTS3900 MOD
CnOperatorTa CnOperatorId CN Operator ID
LTE CNOPERATORTA
LST
CNOPERATORTA

ADD
CNOPERATORTA
BTS3900, BTS3900 MOD
CnOperatorTa Tac Tracking area code
LTE CNOPERATORTA
LST
CNOPERATORTA

ADD
CNOPSHARINGGR
OUP
ADD
SECONDARYOP2
GROUP
LST
CNOPSHARINGGR
OUP
LST
CnOpSharingGroup CN Operator BTS3900, BTS3900
CnOpSharingGroup SECONDARYOP2
Id Sharing Group ID LTE
GROUP
MOD
CNOPSHARINGGR
OUP
RMV
CNOPSHARINGGR
OUP
RMV
SECONDARYOP2
GROUP
 ADD
CNOPSHARINGGR
OUP
MOD
BTS3900, BTS3900
CnOpSharingGroup PrimaryOperatorId Primary Operator ID CNOPSHARINGGR
LTE
OUP
LST
CNOPSHARINGGR
OUP

LST
CNOPSHARINGGR
OUP
ADD
SECONDARYOP2
SecondaryOperator Secondary BTS3900, BTS3900 GROUP
CnOpSharingGroup
List Operator List LTE LST
SECONDARYOP2
GROUP
RMV
SECONDARYOP2
GROUP

ADD
SECONDARYOP2
GROUP
SecondaryOpIdTyp RMV
Secondary BTS3900, BTS3900
CnOpSharingGroup e.SecondaryOperat SECONDARYOP2
Operator Id LTE
orId GROUP
LST
SECONDARYOP2
GROUP

BTS3900, BTS3900 LST EMC

Emc CnOperatorId CN Operator ID
LTE MOD EMC
 Emergency call BTS3900, BTS3900 MOD EMC
Emc EmcEnable
enabled switch LTE LST EMC
 Emergency call
EmcEnableInLimite BTS3900, BTS3900 MOD EMC
Emc enabled switch in
dMode LTE LST EMC
limited mode
 EmcDedicatedBear The ARP of EMC BTS3900, BTS3900 MOD EMC
Emc
erARP dedicated bearer LTE LST EMC
 EmcDefaultBearerA The ARP of EMC BTS3900, BTS3900 MOD EMC
Emc
RP default bearer LTE LST EMC
 MOD
ENODEBCHROUT
eNodeBChrOutput BTS3900, BTS3900 PUTCTRL
OutPutMode CHR Output Mode
Ctrl LTE LST
ENODEBCHROUT
PUTCTRL
 MOD
ENODEBCHROUT
eNodeBChrOutput Sample Rate of BTS3900, BTS3900 PUTCTRL
CallSampleRate
Ctrl Abnormal Call LTE LST
ENODEBCHROUT
PUTCTRL
 MOD
ENODEBCHROUT
eNodeBChrOutput BTS3900, BTS3900 PUTCTRL
MaxStoreCall Max Store Call
Ctrl LTE LST
ENODEBCHROUT
PUTCTRL

MOD
ENODEBCHROUT
eNodeBChrOutput CHRUpLoadingTim CHR UpLoading BTS3900, BTS3900 PUTCTRL
Ctrl eSwitch Time Switch LTE LST
ENODEBCHROUT
PUTCTRL
 MOD
ENODEBSHARING
ENodeBSharingMo ENodeBSharingMo eNodeB sharing BTS3900, BTS3900 MODE
de de mode LTE LST
ENODEBSHARING
MODE

MOD
GLOBALPROCSWI
The Switch of X2 BTS3900, BTS3900 TCH
GlobalProcSwitch X2SonSetupSwitch
setup by SON LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
X2SonLinkSetupTy The method of X2 BTS3900, BTS3900 TCH
GlobalProcSwitch
pe setup by SON LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
BTS3900, BTS3900 TCH
GlobalProcSwitch SriAdaptiveSwitch SRI adaptive switch
LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
BTS3900, BTS3900 TCH
GlobalProcSwitch LcgProfile LCG Profile
LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
RncPoolHoRimSwit RNC POOL HO BTS3900, BTS3900 TCH
GlobalProcSwitch
ch RIM Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
UU Message
UuMsgSimulSendS BTS3900, BTS3900 TCH
GlobalProcSwitch Simultaneous
witch LTE LST
Sending Switch
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
Update eNB
X2BasedUptENode BTS3900, BTS3900 TCH
GlobalProcSwitch Configuration Via
BCfgSwitch LTE LST
X2 Switch
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
X2 Auto Setup
TargetOpBasedX2S BTS3900, BTS3900 TCH
GlobalProcSwitch Switch Via Target
witch LTE LST
Operator
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2SonTNLSelectM X2 Son TNL Select BTS3900, BTS3900 TCH
GlobalProcSwitch
ode Mode LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
Choose UMTS Cell
UtranLoadTransCh BTS3900, BTS3900 TCH
GlobalProcSwitch Load Info Trans
an LTE LST
Channel
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
S1 handover in
S1HoInDataFwdSwi BTS3900, BTS3900 TCH
GlobalProcSwitch data forwarding
tch LTE LST
switch
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
RrcReestProtectTh RRC Reest Protect BTS3900, BTS3900 TCH
GlobalProcSwitch
d Threshold LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
The Timer of X2 BTS3900, BTS3900 TCH
GlobalProcSwitch X2SonDeleteTimer
delete by SON LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
BTS3900, BTS3900 TCH
GlobalProcSwitch RimCodingPolicy RIM Coding Policy
LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
L2GU Handover
L2GUHoWithLCapS BTS3900, BTS3900 TCH
GlobalProcSwitch Required With LTE
witch LTE LST
Cap Switch
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
Different Operator
DiffOpWithSameM BTS3900, BTS3900 TCH
GlobalProcSwitch With Same MMEC
mecSwitch LTE LST
Switch
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
Peer Request
PeerReqBasedX2D BTS3900, BTS3900 TCH
GlobalProcSwitch Based X2 Delete
elSwitch LTE LST
Switch
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
Receive status of
UlPdcpSduRcvStat BTS3900, BTS3900 TCH
GlobalProcSwitch UL PDCP SDUs
SendSwitch LTE LST
sending switch
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
ProtocolMsgOptSwi Protocol Message BTS3900, BTS3900 TCH
GlobalProcSwitch
tch Optimization Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
Delete Ncell
X2BasedDelNcellCf BTS3900, BTS3900 TCH
GlobalProcSwitch Configuration Via
gSwitch LTE LST
X2 Switch
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
BTS3900, BTS3900 TCH
GlobalProcSwitch X2ServedCellType X2 served cell type
LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
eNB Triggered
EnbTrigMmeLoadR BTS3900, BTS3900 TCH
GlobalProcSwitch MME load re-
ebalSwitch LTE LST
balance switch
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
Ue Release
BTS3900, BTS3900 TCH
GlobalProcSwitch UeRelReSynTimes Resynchronization
LTE LST
Times
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
UeRelChkLostSwitc Ue Release Check BTS3900, BTS3900 TCH
GlobalProcSwitch
h Lost Switch LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
UeLinkAbnormalDet UE Link Abnormal BTS3900, BTS3900 TCH
GlobalProcSwitch
ectSwitch Detect Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
S1DefaultPagingDr S1 Default Paging BTS3900, BTS3900 TCH
GlobalProcSwitch
xSelect DRX Value Select LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
Enhanced PHR
EnhancedPhrRptCt BTS3900, BTS3900 TCH
GlobalProcSwitch Report Control
rlSw LTE LST
Switch
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
EutranLoadTransS EUTRAN Load BTS3900, BTS3900 TCH
GlobalProcSwitch
witch Transfer Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
ProtocolSupportSwi Protocol Procedure BTS3900, BTS3900 TCH
GlobalProcSwitch
tch Support Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
CellTrafficTraceMsg Cell Traffic Trace BTS3900, BTS3900 TCH
GlobalProcSwitch
Switch Message Switch LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
Prefer Signal BTS3900, BTS3900 TCH
GlobalProcSwitch PreferSigExtend
Extend Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
MmeSelectProcSwit MME Select BTS3900, BTS3900 TCH
GlobalProcSwitch
ch Procedure Switch LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
S1OfflineCommitSw S1 Offline Commit BTS3900, BTS3900 TCH
GlobalProcSwitch
itch Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
ProtocolCompatibilit Protocol BTS3900, BTS3900 TCH
GlobalProcSwitch
ySw Compatibility Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2 Sctp BTS3900, BTS3900 TCH
GlobalProcSwitch X2SctpEstType
Establishment Type LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2 SON Delete BTS3900, BTS3900 TCH
GlobalProcSwitch X2SonDeleteSwitch
Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2SonDeleteTimerf X2 SON Delete BTS3900, BTS3900 TCH
GlobalProcSwitch
orX2Fault Timer for X2 Fault LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2SonDeleteTimerf X2 SON Delete BTS3900, BTS3900 TCH
GlobalProcSwitch
orX2Usage Timer for X2 Usage LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2 SON Delete Ho
X2SonDeleteHoInN BTS3900, BTS3900 TCH
GlobalProcSwitch In Number
umThd LTE LST
Threshold
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2 SON Delete Ho
X2SonDeleteHoOut BTS3900, BTS3900 TCH
GlobalProcSwitch Out Number
NumThd LTE LST
Threshold
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
VoIP With Gap BTS3900, BTS3900 TCH
GlobalProcSwitch VoipWithGapMode
Mode LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
IntraEnodebHoStati Intra-eNodeB HO BTS3900, BTS3900 TCH
GlobalProcSwitch
cSw Static Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
Maximum Sync-
MaxSyncUserNum BTS3900, BTS3900 TCH
GlobalProcSwitch User Number Per
PerBbi LTE LST
BBI
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2SetupFailureTim X2 Setup Failure BTS3900, BTS3900 TCH
GlobalProcSwitch
etoWait TimetoWait LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2SetupFailureNu X2 Setup Failure BTS3900, BTS3900 TCH
GlobalProcSwitch
mThd Num Threshold LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2SetupFailureNu X2 Setup Failure BTS3900, BTS3900 TCH
GlobalProcSwitch
mTimer Num Timer LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
eX2AutoDeleteSwit eX2 Auto Delete BTS3900, BTS3900 TCH
GlobalProcSwitch
ch Switch LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
eX2AutoDeleteTime eX2 Auto Delete BTS3900, BTS3900 TCH
GlobalProcSwitch
rforFault Timer for eX2 Fault LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2 SON Delete BTS3900, BTS3900 TCH
GlobalProcSwitch X2SonDeleteMode
Mode LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2SonSetupNumTh X2 SON Setup BTS3900, BTS3900 TCH
GlobalProcSwitch
d Num Threshold LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
X2 SON Setup BTS3900, BTS3900 TCH
GlobalProcSwitch X2SonSetupTimer
Timer LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
SecKeyRecfgSwitc Security Key Recfg BTS3900, BTS3900 TCH
GlobalProcSwitch
h after X2 Ho Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
Update eNB
X2BasedUptENode BTS3900, BTS3900 TCH
GlobalProcSwitch Configuration Via
BPolicy LTE LST
X2 Policy
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
MMEDomNameMo MME Domain BTS3900, BTS3900 TCH
GlobalProcSwitch
de Name Mode LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
RRC Connection BTS3900, BTS3900 TCH
GlobalProcSwitch RrcConnPunishThd
Punish Threshold LTE LST
GLOBALPROCSWI
TCH
 MOD
X2-based GLOBALPROCSWI
X2BasedUptNcellCf Neighboring Cell BTS3900, BTS3900 TCH
GlobalProcSwitch
gSwitch Configuration LTE LST
Update Switch GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
Handover Process BTS3900, BTS3900 TCH
GlobalProcSwitch HoProcCtrlSwitch
Control Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
RRC
BTS3900, BTS3900 TCH
GlobalProcSwitch RrcReestOptSwitch Reestablishment
LTE LST
Optimize Switch
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
The Switch of S1-
BTS3900, BTS3900 TCH
GlobalProcSwitch S1MMESonSwitch MME Configuration
LTE LST
by SON
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
PrivateMdtUeSelSw Private MDT UE BTS3900, BTS3900 TCH
GlobalProcSwitch
itch Selection Switch LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
QciUpdParaCheckS QCI Upd Para BTS3900, BTS3900 TCH
GlobalProcSwitch
witch Check Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
Ue Compatibility BTS3900, BTS3900 TCH
GlobalProcSwitch UeCompatSwitch
Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
S1MmePrivFeatureI S1 MME Private BTS3900, BTS3900 TCH
GlobalProcSwitch
nd Feature Indicator LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
SctpAbortSmoothS SCTP Link Abort BTS3900, BTS3900 TCH
GlobalProcSwitch
witch Smooth Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
MaxUserNumPerCe Maximum User BTS3900, BTS3900 TCH
GlobalProcSwitch
ll Number Per Cell LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
CSFB Flow BTS3900, BTS3900 TCH
GlobalProcSwitch CsfbFlowOptSwitch
Optimization Switch LTE LST
GLOBALPROCSWI
TCH

MOD
GLOBALPROCSWI
PRSMutingCtrlSwit PRS Muting Ctrl BTS3900, BTS3900 TCH
GlobalProcSwitch
ch Switch LTE LST
GLOBALPROCSWI
TCH
 MOD
GLOBALPROCSWI
RrcConnReqStatSw Rrc Conn Req Stat BTS3900, BTS3900 TCH
GlobalProcSwitch
itch Switch LTE LST
GLOBALPROCSWI
TCH

ADD
LICENSESHARING
POLICY
LST
LICENSESHARING
LicenseSharingPoli BTS3900, BTS3900 POLICY
CnOperatorId CN Operator ID
cy LTE MOD
LICENSESHARING
POLICY
RMV
LICENSESHARING
POLICY
 ADD
LICENSESHARING
POLICY
The proportion of MOD
LicenseSharingPoli BTS3900, BTS3900
MaxUserNumRate the maximum LICENSESHARING
cy LTE
number of users POLICY
LST
LICENSESHARING
POLICY

ADD
LICENSESHARING
POLICY
The proportion of MOD
LicenseSharingPoli UserNumSharingRa BTS3900, BTS3900
the sharing number LICENSESHARING
cy te LTE
of users POLICY
LST
LICENSESHARING
POLICY

BTS3900, BTS3900
MBMSPara MBSFNAreaId MBSFN Area ID DSP MBMSPARA
LTE

MOD MBMSPARA
Synchronisation BTS3900, BTS3900
MBMSPara SyncPeriod DSP MBMSPARA
Period LTE
LST MBMSPARA

Cell Reservation BTS3900, BTS3900

MBMSPara CellReservationInfo DSP MBMSPARA
Info LTE

BTS3900, BTS3900
MBMSPara LocalCellId Local Cell ID DSP MBMSPARA
LTE
 MBMS Control BTS3900, BTS3900 MOD MBMSPARA
MBMSPara MbmsCtrlSwitch
Switch LTE LST MBMSPARA

ADD
MLBQCIGROUP
LST
BTS3900, BTS3900 MLBQCIGROUP
MlbQciGroup MlbQciGroupId Mlb Qci Group ID
LTE MOD
MLBQCIGROUP
RMV
MLBQCIGROUP

ADD
MLBQCIGROUP
Uplink Minimum BTS3900, BTS3900 MOD
MlbQciGroup UlMinQoSBitRate
Qos Bit Rate LTE MLBQCIGROUP
LST
MLBQCIGROUP

ADD
MLBQCIGROUP
Downlink Minimum BTS3900, BTS3900 MOD
MlbQciGroup DlMinQoSBitRate
Qos Bit Rate LTE MLBQCIGROUP
LST
MLBQCIGROUP
 MMEDOMAINNAM
E
LST
MMEDOMAINNAM
MME Domain BTS3900, BTS3900 E
MMEDomainName MMEDomNameId
Name ID LTE MOD
MMEDOMAINNAM
E
RMV
MMEDOMAINNAM
MMEDOMAINNAM
E
MOD
BTS3900, BTS3900
MMEDomainName CnOperatorId CN Operator ID MMEDOMAINNAM
LTE
E
LST
MMEDOMAINNAM

ADD
MMEDOMAINNAM
E
MOD
MME Domain BTS3900, BTS3900
MMEDomainName MMEDomName MMEDOMAINNAM
Name LTE
E
LST
MMEDOMAINNAM
E

MOD
S1 reestablish min BTS3900, BTS3900 S1REESTTIMER
S1ReestTimer S1ReestMinTimer
timer length LTE LST
S1REESTTIMER

MOD
S1 reestablish max BTS3900, BTS3900 S1REESTTIMER
S1ReestTimer S1ReestMaxTimer
timer length LTE LST
S1REESTTIMER

LST
ENBCNOPRSVDP
BTS3900, BTS3900 ARA
eNBCnOpRsvdPara CnOperatorId CN Operator ID
LTE MOD
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved Switch BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdSwPara0
Parameter 0 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved Switch BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdSwPara1
Parameter 1 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved Switch BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdSwPara2
Parameter 2 LTE LST
ENBCNOPRSVDP
ARA

MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara2
Parameter 2 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara3
Parameter 3 LTE LST
ENBCNOPRSVDP
ARA

MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara4
Parameter 4 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara5
Parameter 5 LTE LST
ENBCNOPRSVDP
ARA

MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara6
Parameter 6 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara7
Parameter 7 LTE LST
ENBCNOPRSVDP
ARA

MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara8
Parameter 8 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara9
Parameter 9 LTE LST
ENBCNOPRSVDP
ARA

MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara10
Parameter 10 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara11
Parameter 11 LTE LST
ENBCNOPRSVDP
ARA

MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara12
Parameter 12 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara13
Parameter 13 LTE LST
ENBCNOPRSVDP
ARA

MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara14
Parameter 14 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara15
Parameter 15 LTE LST
ENBCNOPRSVDP
ARA

MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara16
Parameter 16 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara17
Parameter 17 LTE LST
ENBCNOPRSVDP
ARA

MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara18
Parameter 18 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara19
Parameter 19 LTE LST
ENBCNOPRSVDP
ARA

MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara20
Parameter 20 LTE LST
ENBCNOPRSVDP
ARA
 MOD
ENBCNOPRSVDP
Reserved BTS3900, BTS3900 ARA
eNBCnOpRsvdPara RsvdPara21
Parameter 21 LTE LST
ENBCNOPRSVDP
ARA

CHROUTPUTMOD
E
LST
CHROUTPUTMOD
BTS3900, BTS3900 E
ChrOutputMode ModeNo Mode Number
LTE MOD
CHROUTPUTMOD
E
RMV
CHROUTPUTMOD
ADD
CHROUTPUTMOD
E
MOD
CHR Detail Cause BTS3900, BTS3900
ChrOutputMode ChrDetailCauseVal CHROUTPUTMOD
Value LTE
E
LST
CHROUTPUTMOD
E
 ADD
CHROUTPUTMOD
E
MOD
CHR Hierarchical BTS3900, BTS3900
ChrOutputMode ChrHierOutMode CHROUTPUTMOD
Output Mode LTE
E
LST
CHROUTPUTMOD
E

ADD
CHROUTPUTMOD
E
MOD
CHR Output BTS3900, BTS3900
ChrOutputMode SamplingEnable CHROUTPUTMOD
Sampling Indicator LTE
E
LST
CHROUTPUTMOD
E

ADD ECO
DSP ECO
BTS3900, BTS3900
ECO EcoId ECO ID LST ECO
LTE
MOD ECO
RMV ECO
 ADD ECO
End Point Group BTS3900, BTS3900
ECO EpGroupCfgFlag MOD ECO
Config Flag LTE
LST ECO

ADD ECO
Control Plane End BTS3900, BTS3900
ECO CpEpGroupId MOD ECO
Point Group ID LTE
LST ECO

ADD ECO
User Plane End BTS3900, BTS3900
ECO UpEpGroupId MOD ECO
Point Group ID LTE
LST ECO

ADD ECO
BTS3900, BTS3900
ECO UserLabel User Label MOD ECO
LTE
LST ECO

ECO Interface CP BTS3900, BTS3900

ECO EcoCpBearerId DSP ECO
Bearer ID LTE

ECO Interface CP BTS3900, BTS3900

ECO EcoCpBearerState DSP ECO
Bearer State LTE

ADD
ENODEBPATH
LST ENODEBPATH
BTS3900, BTS3900
eNodeBPath IpPathId IP Path ID MOD
LTE
ENODEBPATH
RMV
ENODEBPATH

ADD
ENODEBPATH
BTS3900, BTS3900
eNodeBPath AppType Application Type MOD
LTE
ENODEBPATH
LST ENODEBPATH
 ADD
ENODEBPATH
BTS3900, BTS3900
eNodeBPath S1InterfaceId S1 Interface ID MOD
LTE
ENODEBPATH
LST ENODEBPATH

ADD
ENODEBPATH
BTS3900, BTS3900
eNodeBPath X2InterfaceId X2 Interface ID MOD
LTE
ENODEBPATH
LST ENODEBPATH

ADD M1
BTS3900, BTS3900 LST M1
M1 M1Id M1 ID
LTE MOD M1
RMV M1

ADD M1
M1 End Point BTS3900, BTS3900
M1 M1EpGroupId MOD M1
Group ID LTE
LST M1

ADD M1
BTS3900, BTS3900
M1 UserLabel User Label MOD M1
LTE
LST M1

ADD M2
DSP M2
BTS3900, BTS3900 LST M2
M2 M2Id M2 ID
LTE MOD M2
RMV M2
RST M2

ADD M2
M2 End Point BTS3900, BTS3900
M2 M2EpGroupId MOD M2
Group ID LTE
LST M2

ADD M2
BTS3900, BTS3900
M2 UserLabel User Label MOD M2
LTE
LST M2

M2 Interface CP BTS3900, BTS3900

M2 M2CpBearerId DSP M2
Bearer ID LTE
 M2 Interface CP BTS3900, BTS3900
M2 M2CpBearerState DSP M2
Bearer State LTE

BTS3900, BTS3900
M2 M2InterfaceState M2 Interface State DSP M2
LTE

M2 Interface BTS3900, BTS3900

M2 M2SessionNum DSP M2
Session Number LTE

BTS3900, BTS3900
M2 MceName MCE Name DSP M2
LTE

BTS3900, BTS3900
M2 GlobalMceId GlobalMceId DSP M2
LTE

M2InterfaceFaultRe M2InterfaceFaultRe BTS3900, BTS3900

M2 DSP M2
ason ason LTE
 M2 Interface BTS3900, BTS3900
M2 M2SessionTMGI DSP M2
Session TMGI LTE

ADD S1
DSP S1
BTS3900, BTS3900
S1 S1Id S1 ID LST S1
LTE
MOD S1
RMV S1

ADD S1
BTS3900, BTS3900
S1 CnOperatorId CN Operator ID MOD S1
LTE
LST S1

ADD S1
Control Plane End BTS3900, BTS3900
S1 CpEpGroupId MOD S1
Point Group ID LTE
LST S1

ADD S1
User Plane End BTS3900, BTS3900
S1 UpEpGroupId MOD S1
Point Group ID LTE
LST S1

ADD S1
BTS3900, BTS3900
S1 MmeRelease MME Release MOD S1
LTE
LST S1
 ADD S1
BTS3900, BTS3900
S1 UserLabel User Label MOD S1
LTE
LST S1

ADD S1
End Point Group BTS3900, BTS3900
S1 EpGroupCfgFlag MOD S1
Config Flag LTE
LST S1

ADD S1
MME Selection BTS3900, BTS3900
S1 Priority MOD S1
Priority LTE
LST S1

ADD S1
CnOpSharingGroup CN Operator BTS3900, BTS3900
S1 MOD S1
Id Sharing Group ID LTE
LST S1
 ADD S1
MME supporting BTS3900, BTS3900
S1 MdtEnable MOD S1
MDT or not LTE
LST S1

BTS3900, BTS3900
S1 S1InterfaceId S1 Interface ID DSP S1
LTE

BTS3900, BTS3900
S1 S1InterfaceState S1 Interface State DSP S1
LTE

S1 Interface Is BTS3900, BTS3900

S1 S1InterfaceIsBlock DSP S1
Block LTE
 S1 Interface CP BTS3900, BTS3900
S1 S1CpBearerId DSP S1
Bearer ID LTE

S1 Interface CP BTS3900, BTS3900

S1 S1CpBearerState DSP S1
Bearer State LTE

ADD
S1INTERFACE
BLK
S1INTERFACE
DSP
S1INTERFACE
BTS3900, BTS3900 MOD
S1Interface S1InterfaceId S1 Interface ID
LTE S1INTERFACE
RMV
S1INTERFACE
RST
S1INTERFACE
UBL
S1INTERFACE

ADD
S1INTERFACE
S1 Interface CP BTS3900, BTS3900 MOD
S1Interface S1CpBearerId
Bearer ID LTE S1INTERFACE
DSP
S1INTERFACE

ADD
S1INTERFACE
BTS3900, BTS3900 MOD
S1Interface CnOperatorId CN Operator ID
LTE S1INTERFACE
DSP
S1INTERFACE
 ADD
S1INTERFACE
BTS3900, BTS3900 MOD
S1Interface MmeRelease MME Release
LTE S1INTERFACE
DSP
S1INTERFACE

ADD
S1INTERFACE
S1 Interface Is BTS3900, BTS3900 MOD
S1Interface S1InterfaceIsBlock
Blocked LTE S1INTERFACE
DSP
S1INTERFACE
 BTS3900, BTS3900 DSP
S1Interface CtrlMode Control Mode
LTE S1INTERFACE

BTS3900, BTS3900 DSP

S1Interface AutoCfgFlag Auto Config Flag
LTE S1INTERFACE
 ADD
S1INTERFACE
MME Selection BTS3900, BTS3900 MOD
S1Interface Priority
Priority LTE S1INTERFACE
DSP
S1INTERFACE

ADD
S1INTERFACE
CnOpSharingGroup CN Operator BTS3900, BTS3900 MOD
S1Interface
Id Sharing Group ID LTE S1INTERFACE
DSP
S1INTERFACE

BTS3900, BTS3900 DSP

S1Interface S1InterfaceState S1 Interface State
LTE S1INTERFACE

BTS3900, BTS3900 DSP

S1Interface S1CpBearerState S1 CP Bearer State
LTE S1INTERFACE
 BTS3900, BTS3900 DSP
S1Interface MmeIsOverLoad MME Is Overloaded
LTE S1INTERFACE

S1InterfaceUserNu S1 Interface User BTS3900, BTS3900 DSP

S1Interface
m Number LTE S1INTERFACE

BTS3900, BTS3900 DSP

S1Interface MmeName MME Name
LTE S1INTERFACE

BTS3900, BTS3900 DSP

S1Interface ServedPlmns Served PLMNs
LTE S1INTERFACE
 BTS3900, BTS3900 DSP
S1Interface ServedGummeis Served GUMMEIs
LTE S1INTERFACE

MME Relative BTS3900, BTS3900 DSP

S1Interface RelativeMmeCap
Capacity LTE S1INTERFACE

S1 Interface Fault BTS3900, BTS3900 DSP

S1Interface S1LinkFaultReason
Reason LTE S1INTERFACE

ADD SO
DSP SO
BTS3900, BTS3900
SO SoId SO ID LST SO
LTE
MOD SO
RMV SO
 ADD SO
End Point Group BTS3900, BTS3900
SO EpGroupCfgFlag MOD SO
Config Flag LTE
LST SO

ADD SO
Control Plane End BTS3900, BTS3900
SO CpEpGroupId MOD SO
Point Group ID LTE
LST SO

ADD SO
User Plane End BTS3900, BTS3900
SO UpEpGroupId MOD SO
Point Group ID LTE
LST SO

ADD SO
BTS3900, BTS3900
SO UserLabel User Label MOD SO
LTE
LST SO

SO Interface CP BTS3900, BTS3900

SO SoCpBearerId DSP SO
Bearer ID LTE

SO Interface CP BTS3900, BTS3900

SO SoCpBearerState DSP SO
Bearer State LTE

ADD ABLMSG
BTS3900, BTS3900
AblMsg RuleIndex Rule Index LST ABLMSG
LTE
RMV ABLMSG

Rule Configuration BTS3900, BTS3900 ADD ABLMSG

AblMsg RuleCfgType
Type LTE LST ABLMSG
 BTS3900, BTS3900 ADD ABLMSG
AblMsg ImeisvTac IMEISV TAC
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg ImeisvSvn IMEISV SVN
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg ImeisvDesc IMEISV Description
LTE LST ABLMSG

Interface Protocol BTS3900, BTS3900 ADD ABLMSG

AblMsg MsgItfType
Name LTE LST ABLMSG
 BTS3900, BTS3900 ADD ABLMSG
AblMsg MsgType Message Type
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg MsgOpType Operate Type
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg MatchCount Match Count
LTE LST ABLMSG
 BTS3900, BTS3900 ADD ABLMSG
AblMsg MatchFieldOffSet1 Match Field Offset 1
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg MatchLen1 Match Length 1
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg MatchContent1 Match Content 1
LTE LST ABLMSG
 BTS3900, BTS3900 ADD ABLMSG
AblMsg MatchFieldOffSet2 Match Field Offset 2
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg MatchLen2 Match Length 2
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg MatchContent2 Match Content 2
LTE LST ABLMSG
 BTS3900, BTS3900 ADD ABLMSG
AblMsg MatchFieldOffSet3 Match Field Offset 3
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg MatchLen3 Match Length 3
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg MatchContent3 Match Content 3
LTE LST ABLMSG
 BTS3900, BTS3900 ADD ABLMSG
AblMsg ModifyCount Modify Count
LTE LST ABLMSG

Modify Field Offset BTS3900, BTS3900 ADD ABLMSG

AblMsg ModifyFieldOffSet1
1 LTE LST ABLMSG
 BTS3900, BTS3900 ADD ABLMSG
AblMsg ModifyLen1 Modify Length 1
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg ModifyContent1 Modify Content 1
LTE LST ABLMSG

Modify Field Offset BTS3900, BTS3900 ADD ABLMSG

AblMsg ModifyFieldOffSet2
2 LTE LST ABLMSG
 BTS3900, BTS3900 ADD ABLMSG
AblMsg ModifyLen2 Modify Length 2
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg ModifyContent2 Modify Content 2
LTE LST ABLMSG

Modify Field Offset BTS3900, BTS3900 ADD ABLMSG

AblMsg ModifyFieldOffSet3
3 LTE LST ABLMSG
 BTS3900, BTS3900 ADD ABLMSG
AblMsg ModifyLen3 Modify Length 3
LTE LST ABLMSG

BTS3900, BTS3900 ADD ABLMSG

AblMsg ModifyContent3 Modify Content 3
LTE LST ABLMSG
 BLK
ENODEBFDDBBR
ES
DSP
ENODEBFDDBBR
eNodeB FDD
eNodeBFddBbResI BTS3900, BTS3900 ES
eNodeBFddBbRes Baseband
d LTE LST
Resource Identifier
ENODEBFDDBBR
ES
UBL
ENODEBFDDBBR
ES

DSP
ENODEBFDDBBR
BTS3900, BTS3900 ES
eNodeBFddBbRes CN Cabinet Number
LTE LST
ENODEBFDDBBR
ES
 DSP
ENODEBFDDBBR
BTS3900, BTS3900 ES
eNodeBFddBbRes SRN Subrack Number
LTE LST
ENODEBFDDBBR
ES

DSP
ENODEBFDDBBR
BTS3900, BTS3900 ES
eNodeBFddBbRes SN Slot Number
LTE LST
ENODEBFDDBBR
ES

DSP
ENODEBFDDBBR
BTS3900, BTS3900 ES
eNodeBFddBbRes Capacity Capacity
LTE LST
ENODEBFDDBBR
ES
 DSP
ENODEBFDDBBR
BTS3900, BTS3900 ES
eNodeBFddBbRes AdmState Administrative State
LTE LST
ENODEBFDDBBR
ES

DSP
BTS3900, BTS3900
eNodeBFddBbRes OpState Operational State ENODEBFDDBBR
LTE
ES
 BLK
ENODEBTDDBBR
ES
DSP
ENODEBTDDBBR
eNodeB TDD
eNodeBTddBbResI BTS3900, BTS3900 ES
eNodeBTddBbRes Baseband
d LTE LST
Resource Identifier
ENODEBTDDBBR
ES
UBL
ENODEBTDDBBR
ES

DSP
ENODEBTDDBBR
BTS3900, BTS3900 ES
eNodeBTddBbRes CN Cabinet Number
LTE LST
ENODEBTDDBBR
ES
 DSP
ENODEBTDDBBR
BTS3900, BTS3900 ES
eNodeBTddBbRes SRN Subrack Number
LTE LST
ENODEBTDDBBR
ES

DSP
ENODEBTDDBBR
BTS3900, BTS3900 ES
eNodeBTddBbRes SN Slot Number
LTE LST
ENODEBTDDBBR
ES

DSP
ENODEBTDDBBR
BTS3900, BTS3900 ES
eNodeBTddBbRes Capacity Capacity
LTE LST
ENODEBTDDBBR
ES
 DSP
ENODEBTDDBBR
BTS3900, BTS3900 ES
eNodeBTddBbRes AdmState Administrative State
LTE LST
ENODEBTDDBBR
ES

DSP
BTS3900, BTS3900
eNodeBTddBbRes OpState Operational State ENODEBTDDBBR
LTE
ES

ADD EX2
DSP EX2
BTS3900, BTS3900
eX2 eX2Id eX2 Object ID LST EX2
LTE
MOD EX2
RMV EX2

ADD EX2
End-Point Group BTS3900, BTS3900
eX2 EpGroupCfgFlag MOD EX2
Configuration Flag LTE
LST EX2
 ADD EX2
Control Plane End- BTS3900, BTS3900
eX2 CpEpGroupId MOD EX2
Point Group ID LTE
LST EX2

ADD EX2
User Plane End- BTS3900, BTS3900
eX2 UpEpGroupId MOD EX2
Point Group ID LTE
LST EX2

ADD EX2
eX2 Interface BTS3900, BTS3900
eX2 BackhaulType MOD EX2
Backhaul Type LTE
LST EX2

ADD EX2
eX2 Object BTS3900, BTS3900
eX2 UserLabel MOD EX2
Description LTE
LST EX2

BTS3900, BTS3900
eX2 eX2InterfaceId eX2 Interface ID DSP EX2
LTE

BTS3900, BTS3900
eX2 eX2InterfaceState eX2 Interface State DSP EX2
LTE

eX2 Interface CP BTS3900, BTS3900

eX2 eX2CpBearerId DSP EX2
Bearer ID LTE

eX2 Interface CP BTS3900, BTS3900

eX2 eX2CpBearerState DSP EX2
Bearer State LTE
LST
MMEFEATURECF
BTS3900, BTS3900 G
MmeFeatureCfg S1InterfaceId S1Interface ID
LTE MOD
MMEFEATURECF
G
 MOD
MMEFEATURECF
MME supporting BTS3900, BTS3900 G
MmeFeatureCfg MdtEnable
MDT or not LTE LST
MMEFEATURECF
G
 LST
BTS3900, BTS3900
MmeFeatureCfg CtrlMode Control Mode MMEFEATURECF
LTE
G

ADD X2
DSP X2
BTS3900, BTS3900
X2 X2Id X2 ID LST X2
LTE
MOD X2
RMV X2

ADD X2
BTS3900, BTS3900
X2 CnOperatorId CN Operator ID MOD X2
LTE
LST X2
 ADD X2
Control Plane End BTS3900, BTS3900
X2 CpEpGroupId MOD X2
Point Group ID LTE
LST X2

ADD X2
User Plane End BTS3900, BTS3900
X2 UpEpGroupId MOD X2
Point Group ID LTE
LST X2

ADD X2
TargetENodeBRele Target eNodeB BTS3900, BTS3900
X2 MOD X2
ase Release LTE
LST X2

ADD X2
BTS3900, BTS3900
X2 UserLabel User Label MOD X2
LTE
LST X2

ADD X2
End Point Group BTS3900, BTS3900
X2 EpGroupCfgFlag MOD X2
Config Flag LTE
LST X2
 ADD X2
CnOpSharingGroup CN Operator BTS3900, BTS3900
X2 MOD X2
Id Sharing Group ID LTE
LST X2

X2 Interface CP BTS3900, BTS3900

X2 X2CpBearerState DSP X2
Bearer State LTE

BTS3900, BTS3900
X2 X2InterfaceId X2 Interface ID DSP X2
LTE

BTS3900, BTS3900
X2 X2InterfaceState X2 Interface State DSP X2
LTE

X2 Interface CP BTS3900, BTS3900

X2 X2CpBearerId DSP X2
Bearer ID LTE

ADD
X2BLACKWHITELI
ST
RMV
Mobile country BTS3900, BTS3900
X2BlackWhiteList Mcc X2BLACKWHITELI
code LTE
ST
LST
X2BLACKWHITELI
ST
 ADD
X2BLACKWHITELI
ST
RMV
Mobile network BTS3900, BTS3900
X2BlackWhiteList Mnc X2BLACKWHITELI
code LTE
ST
LST
X2BLACKWHITELI
ST

ADD
X2BLACKWHITELI
ST
RMV
BTS3900, BTS3900
X2BlackWhiteList ENodeBId eNodeB ID X2BLACKWHITELI
LTE
ST
LST
X2BLACKWHITELI
ST

ADD
X2BLACKWHITELI
X2 Black or White BTS3900, BTS3900 ST
X2BlackWhiteList X2ListType
List Type LTE LST
X2BLACKWHITELI
ST
 ADD
X2INTERFACE
DSP
X2INTERFACE
BTS3900, BTS3900 MOD
X2Interface X2InterfaceId X2Interface ID
LTE X2INTERFACE
RMV
X2INTERFACE
RST
X2INTERFACE

ADD
X2INTERFACE
X2 Interface CP BTS3900, BTS3900 MOD
X2Interface X2CpBearerId
Bearer ID LTE X2INTERFACE
DSP
X2INTERFACE

ADD
X2INTERFACE
BTS3900, BTS3900 MOD
X2Interface CnOperatorId CN Operator ID
LTE X2INTERFACE
DSP
X2INTERFACE

ADD
X2INTERFACE
TargetENodeBRele Target eNodeB BTS3900, BTS3900 MOD
X2Interface
ase release LTE X2INTERFACE
DSP
X2INTERFACE
 BTS3900, BTS3900 DSP
X2Interface CtrlMode Control Mode
LTE X2INTERFACE

BTS3900, BTS3900 DSP

X2Interface AutoCfgFlag Auto Config Flag
LTE X2INTERFACE
 ADD
X2INTERFACE
CnOpSharingGroup CN Operator BTS3900, BTS3900 MOD
X2Interface
Id Sharing Group ID LTE X2INTERFACE
DSP
X2INTERFACE

Neighbor eNodeB BTS3900, BTS3900 DSP

X2Interface NbrENodeBId
ID LTE X2INTERFACE

Neighbor eNodeB BTS3900, BTS3900 DSP

X2Interface NbrENodeBPlmnId
PLMN ID LTE X2INTERFACE

BTS3900, BTS3900 DSP

X2Interface X2InterfaceState X2Interface state
LTE X2INTERFACE
 X2AbnormalReaso X2Interface state BTS3900, BTS3900 DSP
X2Interface
n abnormal reason LTE X2INTERFACE

BTS3900, BTS3900 MOD DRX

Drx DrxAlgSwitch DRX switch
LTE LST DRX

Short-cycle DRX BTS3900, BTS3900 MOD DRX

Drx ShortDrxSwitch
switch LTE LST DRX
 LongDrxCycleSpeci Special long DRX BTS3900, BTS3900 MOD DRX
Drx
al cycle LTE LST DRX
 OnDurationTimerSp Special On BTS3900, BTS3900 MOD DRX
Drx
ecial Duration timer LTE LST DRX
 DrxInactivityTimerS Special DRX BTS3900, BTS3900 MOD DRX
Drx
pecial inactivity timer LTE LST DRX

Special short-cycle
SupportShortDrxSp BTS3900, BTS3900 MOD DRX
Drx DRX supported
ecial LTE LST DRX
indication
 ShortDrxCycleSpeci Special short DRX BTS3900, BTS3900 MOD DRX
Drx
al cycle LTE LST DRX
 DrxShortCycleTimer Special DRX short BTS3900, BTS3900 MOD DRX
Drx
Special cycle timer LTE LST DRX
 LongDrxCycleForA Long DRX Cycle for BTS3900, BTS3900 MOD DRX
Drx
nr ANR LTE LST DRX

LongDRXCycleforI Long DRX Cycle for BTS3900, BTS3900 MOD DRX

Drx
RatAnr Inter-RAT ANR LTE LST DRX
 DrxInactivityTimerF DRX Inactivity BTS3900, BTS3900 MOD DRX
Drx
orAnr Timer For ANR LTE LST DRX
 TDD Mode DRX
TddAnrDrxInactivity BTS3900, BTS3900 MOD DRX
Drx Inactivity Timer for
Timer LTE LST DRX
ANR

ADD
EXTENDEDQCI
LST
Extended QoS BTS3900, BTS3900 EXTENDEDQCI
ExtendedQci ExtendedQci
Class Identifier LTE MOD
EXTENDEDQCI
RMV
EXTENDEDQCI

ADD
EXTENDEDQCI
BTS3900, BTS3900 MOD
ExtendedQci ServiceType Service type
LTE EXTENDEDQCI
LST
EXTENDEDQCI
 ADD
EXTENDEDQCI
Uplink scheduling BTS3900, BTS3900 MOD
ExtendedQci UlschPriorityFactor
priority factor LTE EXTENDEDQCI
LST
EXTENDEDQCI

ADD
EXTENDEDQCI
Downlink
BTS3900, BTS3900 MOD
ExtendedQci DlschPriorityFactor scheduling priority
LTE EXTENDEDQCI
factor
LST
EXTENDEDQCI

ADD
EXTENDEDQCI
BTS3900, BTS3900 MOD
ExtendedQci UlMinGbr Uplink MinGBR
LTE EXTENDEDQCI
LST
EXTENDEDQCI
 ADD
EXTENDEDQCI
BTS3900, BTS3900 MOD
ExtendedQci DlMinGbr Downlink MinGBR
LTE EXTENDEDQCI
LST
EXTENDEDQCI

ADD
EXTENDEDQCI
PreAllocationWeigh Pre-allocation BTS3900, BTS3900 MOD
ExtendedQci
t weight LTE EXTENDEDQCI
LST
EXTENDEDQCI
 ADD
EXTENDEDQCI
InterRatPolicyCfgGr InterRAT policy BTS3900, BTS3900 MOD
ExtendedQci
oupId config group ID LTE EXTENDEDQCI
LST
EXTENDEDQCI

ADD
EXTENDEDQCI
BTS3900, BTS3900 MOD
ExtendedQci PrioritisedBitRate Prioritised bit rate
LTE EXTENDEDQCI
LST
EXTENDEDQCI
 ADD
EXTENDEDQCI
LogicalChannelPrio Logical channel BTS3900, BTS3900 MOD
ExtendedQci
rity priority LTE EXTENDEDQCI
LST
EXTENDEDQCI

ADD
EXTENDEDQCI
RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900 MOD
ExtendedQci
d parameter group ID LTE EXTENDEDQCI
LST
EXTENDEDQCI
ADD
EXTENDEDQCI
BTS3900, BTS3900 MOD
ExtendedQci FreeUserFlag Free user flag
LTE EXTENDEDQCI
LST
EXTENDEDQCI
 ADD
EXTENDEDQCI
BTS3900, BTS3900 MOD
ExtendedQci FlowCtrlType Flow Control Type
LTE EXTENDEDQCI
LST
EXTENDEDQCI

ADD
EXTENDEDQCI
LtePttDedicatedExt PTT Dedicated BTS3900, BTS3900 MOD
ExtendedQci
endedQci extended QCI LTE EXTENDEDQCI
LST
EXTENDEDQCI
 ADD
EXTENDEDQCI
LtePttDownlinkPrior PTT Downlink BTS3900, BTS3900 MOD
ExtendedQci
ity Priority LTE EXTENDEDQCI
LST
EXTENDEDQCI
 ADD
EXTENDEDQCI
BTS3900, BTS3900 MOD
ExtendedQci LtePttUplinkPriority PTT Uplink Priority
LTE EXTENDEDQCI
LST
EXTENDEDQCI

ADD
INTERRATPOLICY
CFGGROUP
LST
INTERRATPOLICY
InterRatPolicyCfgGr InterRatPolicyCfgGr InterRAT policy BTS3900, BTS3900 CFGGROUP
oup oupId config group ID LTE MOD
INTERRATPOLICY
CFGGROUP
RMV
INTERRATPOLICY
CFGGROUP
 ADD
INTERRATPOLICY
CFGGROUP
MOD
InterRatPolicyCfgGr UTRAN handover BTS3900, BTS3900
UtranHoCfg INTERRATPOLICY
oup policy Configuration LTE
CFGGROUP
LST
INTERRATPOLICY
CFGGROUP

ADD
INTERRATPOLICY
CFGGROUP
GERAN GSM MOD
InterRatPolicyCfgGr BTS3900, BTS3900
GeranGsmHoCfg handover policy INTERRATPOLICY
oup LTE
Configuration CFGGROUP
LST
INTERRATPOLICY
CFGGROUP
 ADD
INTERRATPOLICY
CFGGROUP
GERAN GPRS MOD
InterRatPolicyCfgGr GeranGprsEdgeHo BTS3900, BTS3900
EDGE handover INTERRATPOLICY
oup Cfg LTE
policy Configuration CFGGROUP
LST
INTERRATPOLICY
CFGGROUP

ADD
INTERRATPOLICY
CFGGROUP
CDMA2000 1XRTT MOD
InterRatPolicyCfgGr BTS3900, BTS3900
Cdma1xRttHoCfg handover policy INTERRATPOLICY
oup LTE
Configuration CFGGROUP
LST
INTERRATPOLICY
CFGGROUP
 ADD
INTERRATPOLICY
CFGGROUP
CDMA2000 HRPD MOD
InterRatPolicyCfgGr BTS3900, BTS3900
CdmaHrpdHoCfg handover policy INTERRATPOLICY
oup LTE
Configuration CFGGROUP
LST
INTERRATPOLICY
CFGGROUP

ADD
INTERRATPOLICY
CFGGROUP
MOD
InterRatPolicyCfgGr BTS3900, BTS3900
NoHoFlag No handover flag INTERRATPOLICY
oup LTE
CFGGROUP
LST
INTERRATPOLICY
CFGGROUP

ADD
INTERRATPOLICY
CFGGROUP
MOD
InterRatPolicyCfgGr BTS3900, BTS3900
NoFastAnrFlag No fast ANR flag INTERRATPOLICY
oup LTE
CFGGROUP
LST
INTERRATPOLICY
CFGGROUP
 MOD
Delta Offset CQI BTS3900, BTS3900 PUSCHPARAM
PuschParam DeltaOffsetCqiIndex
Index LTE LST
PUSCHPARAM

MOD
Delta Offset RI BTS3900, BTS3900 PUSCHPARAM
PuschParam DeltaOffsetRiIndex
Index LTE LST
PUSCHPARAM
 MOD
DeltaOffsetAckInde Delta Offset BTS3900, BTS3900 PUSCHPARAM
PuschParam
x Acknowledge Index LTE LST
PUSCHPARAM

ADD
RLCPDCPPARAGR
OUP
LST
RLCPDCPPARAGR
RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900 OUP
RlcPdcpParaGroup
d parameter group ID LTE MOD
RLCPDCPPARAGR
OUP
RMV
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
BTS3900, BTS3900
RlcPdcpParaGroup DiscardTimer Discard timer RLCPDCPPARAGR
LTE
OUP
LST
RLCPDCPPARAGR
OUP

ADD
RLCPDCPPARAGR
OUP
MOD
RLC-UM or RLC- BTS3900, BTS3900
RlcPdcpParaGroup RlcMode RLCPDCPPARAGR
AM mode LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
UeMaxRetxThresho MaxretxThreshold BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
ld for UE LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
ENodeBMaxRetxTh MaxRetxThreshold BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
reshold for eNodeB LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
BTS3900, BTS3900
RlcPdcpParaGroup UePollByte PollByte for UE RLCPDCPPARAGR
LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
PollByte for BTS3900, BTS3900
RlcPdcpParaGroup ENodeBPollByte RLCPDCPPARAGR
eNodeB LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
BTS3900, BTS3900
RlcPdcpParaGroup UePollPdu PollPdu for UE RLCPDCPPARAGR
LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
BTS3900, BTS3900
RlcPdcpParaGroup ENodeBPollPdu PollPdu for eNodeB RLCPDCPPARAGR
LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
UePollRetransmitTi Poll retransmit timer BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
mer for UE LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
ENodeBPollRetrans Poll retransmit timer BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
mitTimer for eNodeB LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
UeStatusProhibitTi Status prohibit timer BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
mer for UE LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
ENodeBStatusProhi Status prohibit timer BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
bitTimer for eNodeB LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
UeAmReorderingTi AM reordering timer BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
mer for UE LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
ENodeBAmReorder AM reordering timer BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
ingTimer for eNodeB LTE
OUP
LST
RLCPDCPPARAGR
OUP

ADD
RLCPDCPPARAGR
OUP
MOD
BTS3900, BTS3900
RlcPdcpParaGroup PdcpSnSize UM PDCP-SN size RLCPDCPPARAGR
LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
BTS3900, BTS3900
RlcPdcpParaGroup UlRlcSnSize Uplink RLC-SN size RLCPDCPPARAGR
LTE
OUP
LST
RLCPDCPPARAGR
OUP

ADD
RLCPDCPPARAGR
OUP
MOD
Downlink RLC-SN BTS3900, BTS3900
RlcPdcpParaGroup DlRlcSnSize RLCPDCPPARAGR
size LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
UeUmReorderingTi UM reordering timer BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
mer for UE LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
ENodeBUmReorder UM reordering timer BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
ingTimer for eNodeB LTE
OUP
LST
RLCPDCPPARAGR
OUP

ADD
RLCPDCPPARAGR
OUP
AM PDCP status MOD
BTS3900, BTS3900
RlcPdcpParaGroup PdcpStatusRptReq report required RLCPDCPPARAGR
LTE
indication OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
RlcParaAdaptSwitc RLC Parameter BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
h Adaptive Switch LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
eNodeBPollRtrTime Preset eNodeB Poll BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
rPreset Retransmit Timer LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
Preset eNodeB MOD
eNodeBStatProhTi BTS3900, BTS3900
RlcPdcpParaGroup Status Prohibit RLCPDCPPARAGR
merPreset LTE
Timer OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
UePollRtrTimerPres Preset UE Poll BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
et Retransmit Timer LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
UeStatProhTimerPr Preset UE Status BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
eset Prohibit Timer LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
NonsptUmUeAdapt Nonsupport Um UE BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
Switch Adaptive Switch LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
Discardtimer MOD
UlDlDiscardtimerSw BTS3900, BTS3900
RlcPdcpParaGroup Separate Config RLCPDCPPARAGR
itch LTE
Switch OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
DlPdcpDiscardTime DownLink PDCP BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
r Discard Timer LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
CA UE RLC MOD
CaUeRlcParaAdptiv BTS3900, BTS3900
RlcPdcpParaGroup Parameter Adaptive RLCPDCPPARAGR
eThd LTE
Threshold OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
CaUeReorderingTi CA UE Reordering BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
mer Timer LTE
OUP
LST
RLCPDCPPARAGR
OUP
 ADD
RLCPDCPPARAGR
OUP
MOD
CaUeStatProhTime CA UE Status BTS3900, BTS3900
RlcPdcpParaGroup RLCPDCPPARAGR
r Prohibit Timer LTE
OUP
LST
RLCPDCPPARAGR
OUP

ADD
RLCPDCPPARAGR
OUP
MOD
AM Mode PDCP BTS3900, BTS3900
RlcPdcpParaGroup AmPdcpSnSize RLCPDCPPARAGR
SN Length LTE
OUP
LST
RLCPDCPPARAGR
OUP

LST
BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg SrbId SRB ID
LTE MOD
SRBRLCPDCPCFG
 MOD
UeMaxRetxThresho MaxRetxThreshold BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg
ld for UE LTE LST
SRBRLCPDCPCFG

MOD
ENodeBMaxRetxTh MaxRetxThreshold BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg
reshold for eNodeB LTE LST
SRBRLCPDCPCFG
 MOD
BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg UePollByte PollByte for UE
LTE LST
SRBRLCPDCPCFG
 MOD
PollByte for BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg ENodeBPollByte
eNodeB LTE LST
SRBRLCPDCPCFG
 MOD
BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg UePollPdu PollPdu for UE
LTE LST
SRBRLCPDCPCFG
 MOD
BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg ENodeBPollPdu PollPdu for eNodeB
LTE LST
SRBRLCPDCPCFG
 MOD
UePollRetransmitTi Poll retransmit timer BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg
mer for UE LTE LST
SRBRLCPDCPCFG
 MOD
ENodeBPollRetrans Poll retransmit timer BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg
mitTimer for eNodeB LTE LST
SRBRLCPDCPCFG
 MOD
UeStatusProhibitTi Status prohibit timer BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg
mer for UE LTE LST
SRBRLCPDCPCFG
 MOD
ENodeBStatusProhi Status prohibit timer BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg
bitTimer for eNodeB LTE LST
SRBRLCPDCPCFG
 MOD
UeAmReorderingTi AM reordering timer BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg
mer for UE LTE LST
SRBRLCPDCPCFG
 MOD
ENodeBAmReorder AM reordering timer BTS3900, BTS3900 SRBRLCPDCPCFG
SrbRlcPdcpCfg
ingTimer for eNodeB LTE LST
SRBRLCPDCPCFG

LST
QoS Class BTS3900, BTS3900 STANDARDQCI
StandardQci Qci
Indication LTE MOD
STANDARDQCI
 MOD
BTS3900, BTS3900 STANDARDQCI
StandardQci UlschPriorityFactor Ulsch priority factor
LTE LST
STANDARDQCI

MOD
BTS3900, BTS3900 STANDARDQCI
StandardQci DlschPriorityFactor Dlsch priority factor
LTE LST
STANDARDQCI

MOD
BTS3900, BTS3900 STANDARDQCI
StandardQci UlMinGbr Uplink MinGBR
LTE LST
STANDARDQCI
 MOD
BTS3900, BTS3900 STANDARDQCI
StandardQci DlMinGbr Downlink MinGBR
LTE LST
STANDARDQCI

MOD
PreAllocationWeigh Pre-allocation BTS3900, BTS3900 STANDARDQCI
StandardQci
t weight LTE LST
STANDARDQCI
 MOD
InterRatPolicyCfgGr InterRAT policy BTS3900, BTS3900 STANDARDQCI
StandardQci
oupId config group ID LTE LST
STANDARDQCI

MOD
RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900 STANDARDQCI
StandardQci
d parameter group ID LTE LST
STANDARDQCI

MOD
BTS3900, BTS3900 STANDARDQCI
StandardQci PrioritisedBitRate Prioritised bit rate
LTE LST
STANDARDQCI
 MOD
LogicalChannelPrio Logical channel BTS3900, BTS3900 STANDARDQCI
StandardQci
rity priority LTE LST
STANDARDQCI

MOD
BTS3900, BTS3900 STANDARDQCI
StandardQci FlowCtrlType Flow control type
LTE LST
STANDARDQCI
 LST
ENBQCIRSVDPAR
QoS Class BTS3900, BTS3900 A
eNBQciRsvdPara Qci
Indication LTE MOD
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved Switch BTS3900, BTS3900 A
eNBQciRsvdPara RsvdSwPara0
Parameter 0 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved Switch BTS3900, BTS3900 A
eNBQciRsvdPara RsvdSwPara1
Parameter 1 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved Switch BTS3900, BTS3900 A
eNBQciRsvdPara RsvdSwPara2
Parameter 2 LTE LST
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara2
Parameter 2 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara3
Parameter 3 LTE LST
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara4
Parameter 4 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara5
Parameter 5 LTE LST
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara6
Parameter 6 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara7
Parameter 7 LTE LST
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara8
Parameter 8 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara9
Parameter 9 LTE LST
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara10
Parameter 10 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara11
Parameter 11 LTE LST
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara12
Parameter 12 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara13
Parameter 13 LTE LST
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara14
Parameter 14 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara15
Parameter 15 LTE LST
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara16
Parameter 16 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara17
Parameter 17 LTE LST
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara18
Parameter 18 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara19
Parameter 19 LTE LST
ENBQCIRSVDPAR
A

MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara20
Parameter 20 LTE LST
ENBQCIRSVDPAR
A
 MOD
ENBQCIRSVDPAR
Reserved BTS3900, BTS3900 A
eNBQciRsvdPara RsvdPara21
Parameter 21 LTE LST
ENBQCIRSVDPAR
A

MOD
CQI period adaptive BTS3900, BTS3900 CQIADAPTIVECFG
CqiAdaptiveCfg CqiPeriodAdaptive
switch LTE LST
CQIADAPTIVECFG
 MOD
User CQI period BTS3900, BTS3900 CQIADAPTIVECFG
CqiAdaptiveCfg UserCqiPeriodCfg
config LTE LST
CQIADAPTIVECFG

MOD
SimultaneousAckN
SimulAckNackAndC BTS3900, BTS3900 CQIADAPTIVECFG
CqiAdaptiveCfg ackAndCQI config
qiSwitch LTE LST
switch
CQIADAPTIVECFG
 MOD
PUCCH Periodic
PucchPeriodicCqiO BTS3900, BTS3900 CQIADAPTIVECFG
CqiAdaptiveCfg CQI Optimize
ptSwitch LTE LST
Switch
CQIADAPTIVECFG
 MOD
HoAperiodicCqiCfg Handover Aperiodic BTS3900, BTS3900 CQIADAPTIVECFG
CqiAdaptiveCfg
Switch Cqi Config Switch LTE LST
CQIADAPTIVECFG
 MOD
PUCCH Format 3
SimulAckNackAndC BTS3900, BTS3900 CQIADAPTIVECFG
CqiAdaptiveCfg CQI Reporting
qiFmt3Sw LTE LST
Switch
CQIADAPTIVECFG

MOD
SRSADAPTIVECF
SRS period BTS3900, BTS3900 G
SrsAdaptiveCfg SrsPeriodAdaptive
adaptive switch LTE LST
SRSADAPTIVECF
G
 MOD
SRSADAPTIVECF
User SRS period BTS3900, BTS3900 G
SrsAdaptiveCfg UserSrsPeriodCfg
config LTE LST
SRSADAPTIVECF
G

ADD
UECOMPATOPT
LST
BTS3900, BTS3900 UECOMPATOPT
UeCompatOpt ImeisvTac IMEISV TAC
LTE MOD
UECOMPATOPT
RMV
UECOMPATOPT

ADD
UECOMPATOPT
IMEISV SVN BTS3900, BTS3900 MOD
UeCompatOpt ImeisvSvnCfgInd
Configure Indicator LTE UECOMPATOPT
LST
UECOMPATOPT

ADD
UECOMPATOPT
BTS3900, BTS3900 MOD
UeCompatOpt ImeisvSvn IMEISV SVN
LTE UECOMPATOPT
LST
UECOMPATOPT
 ADD
UECOMPATOPT
Black List Control BTS3900, BTS3900 MOD
UeCompatOpt BlkLstCtrlSwitch
Switch LTE UECOMPATOPT
LST
UECOMPATOPT

ADD
UECOMPATOPT
Ue Type BTS3900, BTS3900 MOD
UeCompatOpt UeTypeDesc
Description LTE UECOMPATOPT
LST
UECOMPATOPT
 ADD
UECOMPATOPT
White List Control BTS3900, BTS3900 MOD
UeCompatOpt WhiteLstCtrlSwitch
Switch LTE UECOMPATOPT
LST
UECOMPATOPT

BTS3900, BTS3900 LST TYPDRBBSR

TypDrbBsr Qci QoS Class Identifier
LTE MOD TYPDRBBSR
 BTS3900, BTS3900 MOD TYPDRBBSR
TypDrbBsr TPerodicBSRTimer Periodic BSR Timer
LTE LST TYPDRBBSR

BSR
BTS3900, BTS3900 MOD TYPDRBBSR
TypDrbBsr RetxBsrTimer Retransmission
LTE LST TYPDRBBSR
Timer
 MOD
GAP measurement BTS3900, BTS3900 HOMEASCOMM
HoMeasComm GapPatternType
pattern LTE LST
HOMEASCOMM

MOD
EutranFilterCoeffRs EUTRAN RSRP BTS3900, BTS3900 HOMEASCOMM
HoMeasComm
rp filter coefficient LTE LST
HOMEASCOMM
 MOD
EutranFilterCoeffRs EUTRAN RSRQ BTS3900, BTS3900 HOMEASCOMM
HoMeasComm
rq filter coefficient LTE LST
HOMEASCOMM

MOD
GERAN filter BTS3900, BTS3900 HOMEASCOMM
HoMeasComm GeranFilterCoeff
coefficient LTE LST
HOMEASCOMM
 MOD
BTS3900, BTS3900 HOMEASCOMM
HoMeasComm SMeasureInd SMeasureInd
LTE LST
HOMEASCOMM
 MOD
BTS3900, BTS3900 HOMEASCOMM
HoMeasComm SMeasure SMeasure
LTE LST
HOMEASCOMM
 MOD
BTS3900, BTS3900 HOMEASCOMM
HoMeasComm SpeedDepParaInd SpeedDependInd
LTE LST
HOMEASCOMM
 MOD
TCRmax in BTS3900, BTS3900 HOMEASCOMM
HoMeasComm TcrMaxConnMode
connected mode LTE LST
HOMEASCOMM
 MOD
TcrMaxHystConnM TCRmaxHyst in BTS3900, BTS3900 HOMEASCOMM
HoMeasComm
ode connected mode LTE LST
HOMEASCOMM
 MOD
NcrMediumConnMo NCR Medium in BTS3900, BTS3900 HOMEASCOMM
HoMeasComm
de connected mode LTE LST
HOMEASCOMM
 MOD
NCR High in BTS3900, BTS3900 HOMEASCOMM
HoMeasComm NcrHighConnMode
connected mode LTE LST
HOMEASCOMM
 TTT Scaling factor MOD
for Medium mobility BTS3900, BTS3900 HOMEASCOMM
HoMeasComm TttSfMedium
state in connected LTE LST
mode HOMEASCOMM
 TTT Scaling factor MOD
for High mobility BTS3900, BTS3900 HOMEASCOMM
HoMeasComm TttSfHigh
state in connected LTE LST
mode HOMEASCOMM

MOD
UtranFilterCoeffRsc UTRAN RSCP filter BTS3900, BTS3900 HOMEASCOMM
HoMeasComm
p coefficient LTE LST
HOMEASCOMM
 MOD
UtranFilterCoeffEcn UTRAN ECN0 filter BTS3900, BTS3900 HOMEASCOMM
HoMeasComm
0 coefficient LTE LST
HOMEASCOMM

MOD
Optimized
OptHoPreFailPunis BTS3900, BTS3900 HOMEASCOMM
HoMeasComm Handover Prepare
hTimer LTE LST
Fail Punish Timer
HOMEASCOMM
 MOD
INTERRATHOCOM
InterRatHoMaxRprt Max report cell BTS3900, BTS3900 M
InterRatHoComm
Cell number LTE LST
INTERRATHOCOM
M

MOD
INTERRATHOCOM
InterRatHoRprtAmo Measurement BTS3900, BTS3900 M
InterRatHoComm
unt report amount LTE LST
INTERRATHOCOM
M
 MOD
INTERRATHOCOM
Geran
InterRatHoGeranRp BTS3900, BTS3900 M
InterRatHoComm measurement
rtInterval LTE LST
report interval
INTERRATHOCOM
M
 MOD
INTERRATHOCOM
InterRatHoUtranB1 Utran measurement BTS3900, BTS3900 M
InterRatHoComm
MeasQuan trigger quantity LTE LST
INTERRATHOCOM
M

MOD
INTERRATHOCOM
UTRAN FDD
InterRatHoUtranRpr BTS3900, BTS3900 M
InterRatHoComm measurement
tInterval LTE LST
report interval
INTERRATHOCOM
M
 MOD
INTERRATHOCOM
CDMA20001XRTT
InterRatHoCdma1x BTS3900, BTS3900 M
InterRatHoComm measurement
RttB1MeasQuan LTE LST
trigger quantity
INTERRATHOCOM
M

MOD
INTERRATHOCOM
CDMA20001XRTT
InterRatCdma1xRtt BTS3900, BTS3900 M
InterRatHoComm measurement
RprtInterval LTE LST
report interval
INTERRATHOCOM
M

MOD
INTERRATHOCOM
CDMA2000HRPD
InterRatHoCdmaHr BTS3900, BTS3900 M
InterRatHoComm measurement
pdB1MeasQuan LTE LST
trigger quantity
INTERRATHOCOM
M
 MOD
INTERRATHOCOM
CDMA2000HRPD
InterRatCdmaHrpd BTS3900, BTS3900 M
InterRatHoComm measurement
RprtInterval LTE LST
report interval
INTERRATHOCOM
M

MOD
INTERRATHOCOM
InterRat A1A2
InterRatHoA1A2Tri BTS3900, BTS3900 M
InterRatHoComm measurement
gQuan LTE LST
trigger quantity
INTERRATHOCOM
M
 MOD
INTERRATHOCOM
InterRatHoEventTy Inter RAT HO BTS3900, BTS3900 M
InterRatHoComm
pe Trigger Event Type LTE LST
INTERRATHOCOM
M

MOD
INTERRATHOCOM
Cdma20001XrttMe CDMA2000 1xRTT BTS3900, BTS3900 M
InterRatHoComm
asTimer Measure Timer LTE LST
INTERRATHOCOM
M

MOD
INTERRATHOCOM
Cdma20001XrttJud CDMA2000 1xRTT BTS3900, BTS3900 M
InterRatHoComm
gePnNum Judge PN Number LTE LST
INTERRATHOCOM
M

MOD
INTERRATHOCOM
CDMA2000 HRPD
Cdma2000HrpdFre BTS3900, BTS3900 M
InterRatHoComm Frequency Select
qSelMode LTE LST
Mode
INTERRATHOCOM
M

MOD
INTERRATHOCOM
CDMA2000 1xRTT
Cdma20001XrttFre BTS3900, BTS3900 M
InterRatHoComm Frequency Select
qSelMode LTE LST
Mode
INTERRATHOCOM
M
 MOD
INTERRATHOCOM
CdmaEcsfbPsConc eCSFB PS BTS3900, BTS3900 M
InterRatHoComm
urrentMode Concurrent Mode LTE LST
INTERRATHOCOM
M

MOD
INTERRATHOCOM
Cdma20001XrttMe eCSFB BTS3900, BTS3900 M
InterRatHoComm
asMode Measurement Mode LTE LST
INTERRATHOCOM
M

MOD
INTERRATHOCOM
Cdma1XrttSectorId eCSFB SectorID BTS3900, BTS3900 M
InterRatHoComm
SelMode Select Mode LTE LST
INTERRATHOCOM
M

MOD
INTERRATHOCOM
CellInfoMaxUtranC Max Utran cell num BTS3900, BTS3900 M
InterRatHoComm
ellNum in redirection LTE LST
INTERRATHOCOM
M

MOD
INTERRATHOCOM
CellInfoMaxGeranC Max Geran cell num BTS3900, BTS3900 M
InterRatHoComm
ellNum in redirection LTE LST
INTERRATHOCOM
M

MOD
INTERRATHOCOM
Max Geran cell num
GeranCellNumForE BTS3900, BTS3900 M
InterRatHoComm in CSFB EMC
mcRedirect LTE LST
redirection
INTERRATHOCOM
M
 MOD
INTERRATHOCOM
Max Utran cell num
UtranCellNumForE BTS3900, BTS3900 M
InterRatHoComm in CSFB EMC
mcRedirect LTE LST
redirection
INTERRATHOCOM
M

MOD
INTERRATHOCOM
CDMA2000 eHRPD
CdmaHrpdSectorId BTS3900, BTS3900 M
InterRatHoComm SectorID Select
SelMode LTE LST
Mode
INTERRATHOCOM
M
 MOD
INTERRATHOCOM
InterRAT Blind
IRatBlindRedirPlmn BTS3900, BTS3900 M
InterRatHoComm Redir PLMN Cfg
CfgSimSw LTE LST
Simplify Sw
INTERRATHOCOM
M

MOD
INTRARATHOCOM
IntraRatHoMaxRprt Max report cell BTS3900, BTS3900 M
IntraRatHoComm
Cell number LTE LST
INTRARATHOCOM
M
 MOD
INTRARATHOCOM
IntraRatHoRprtAmo Measurement BTS3900, BTS3900 M
IntraRatHoComm
unt report amount LTE LST
INTRARATHOCOM
M

MOD
INTRARATHOCOM
IntraFreqHoA3Trig A3 measurement BTS3900, BTS3900 M
IntraRatHoComm
Quan trigger quantity LTE LST
INTRARATHOCOM
M
 MOD
INTRARATHOCOM
IntraFreqHoA3Rprt A3 measurement BTS3900, BTS3900 M
IntraRatHoComm
Quan report quantity LTE LST
INTRARATHOCOM
M

MOD
INTRARATHOCOM
IntraFreqHoRprtInte A3 measurement BTS3900, BTS3900 M
IntraRatHoComm
rval report interval LTE LST
INTRARATHOCOM
M
 MOD
INTRARATHOCOM
InterFreqHoA4Rprt Measurement A4 BTS3900, BTS3900 M
IntraRatHoComm
Quan report quantity LTE LST
INTRARATHOCOM
M

MOD
INTRARATHOCOM
Interfreq
InterFreqHoRprtInte BTS3900, BTS3900 M
IntraRatHoComm measurement
rval LTE LST
report interval
INTRARATHOCOM
M
 MOD
INTRARATHOCOM
InterFreq A1A2
InterFreqHoA1A2Tri BTS3900, BTS3900 M
IntraRatHoComm Measurement
gQuan LTE LST
trigger quantity
INTRARATHOCOM
M

MOD
INTRARATHOCOM
A1A2 Measurement
FreqPriInterFreqHo BTS3900, BTS3900 M
IntraRatHoComm trigger quantity of
A1TrigQuan LTE LST
Freq Priority
INTRARATHOCOM
M
 MOD
INTRARATHOCOM
InterFreqHoA4Trig A4 Measurement BTS3900, BTS3900 M
IntraRatHoComm
Quan Trigger Quantity LTE LST
INTRARATHOCOM
M

MOD
INTRARATHOCOM
Coverage Based
CovBasedIfHoWaiti BTS3900, BTS3900 M
IntraRatHoComm Inter Frequency HO
ngTimer LTE LST
Waiting Timer
INTRARATHOCOM
M

MOD
INTRARATHOCOM
A3 InterFreq A1A2
A3InterFreqHoA1A BTS3900, BTS3900 M
IntraRatHoComm Measurement
2TrigQuan LTE LST
TrigQuan
INTRARATHOCOM
M

LST
BTS3900, BTS3900 CSFALLBACKHO
CSFallBackHo LocalCellId Local cell ID
LTE MOD
CSFALLBACKHO
 MOD
CSFB Utran
CsfbHoUtranTimeT BTS3900, BTS3900 CSFALLBACKHO
CSFallBackHo EventB1 Time To
oTrig LTE LST
Trig
CSFALLBACKHO
 MOD
CSFB Geran
CsfbHoGeranTimeT BTS3900, BTS3900 CSFALLBACKHO
CSFallBackHo EventB1 Time To
oTrig LTE LST
Trig
CSFALLBACKHO
 MOD
CSFB CDMA
CsfbHoCdmaTimeT BTS3900, BTS3900 CSFALLBACKHO
CSFallBackHo EventB1 Time To
oTrig LTE LST
Trig
CSFALLBACKHO
 MOD
CSFB UTRAN
CsfbHoUtranB1Thd BTS3900, BTS3900 CSFALLBACKHO
CSFallBackHo EventB1 RSCP
Rscp LTE LST
Trigger Threshold
CSFALLBACKHO
 MOD
CSFB UTRAN
CsfbHoUtranB1Thd BTS3900, BTS3900 CSFALLBACKHO
CSFallBackHo EventB1 ECN0
Ecn0 LTE LST
Trigger Threshold
CSFALLBACKHO

MOD
CSFB GERAN
CsfbHoGeranB1Th BTS3900, BTS3900 CSFALLBACKHO
CSFallBackHo EventB1 Trigger
d LTE LST
Threshold
CSFALLBACKHO
 MOD
CSFB CDMA2000
CsfbHoCdmaB1Thd BTS3900, BTS3900 CSFALLBACKHO
CSFallBackHo EventB1 Trigger
Ps LTE LST
Threshold
CSFALLBACKHO

MOD
CSFB Adaptive
BTS3900, BTS3900 CSFALLBACKHO
CSFallBackHo BlindHoA1ThdRsrp Blind Ho A1 RSRP
LTE LST
Trigger Threshold
CSFALLBACKHO
 MOD
CsfbProtectionTime CSFB Protection BTS3900, BTS3900 CSFALLBACKHO
CSFallBackHo
r Timer LTE LST
CSFALLBACKHO

BTS3900, BTS3900 LST CELLACBAR

CellAcBar LocalCellId Local cell ID
LTE MOD CELLACBAR
 AC barring
AcBarringInfoCfgIn BTS3900, BTS3900 MOD CELLACBAR
CellAcBar information
d LTE LST CELLACBAR
configure indicator
 AcBarringForEmerg Emergency call BTS3900, BTS3900 MOD CELLACBAR
CellAcBar
ency barring state LTE LST CELLACBAR

AC barring for
AcBarringForMoDat BTS3900, BTS3900 MOD CELLACBAR
CellAcBar mobile data
aCfgInd LTE LST CELLACBAR
configure indicator
 Access probability
AcBarringFactorFor BTS3900, BTS3900 MOD CELLACBAR
CellAcBar factor for originating
Call LTE LST CELLACBAR
call

Mean access
BTS3900, BTS3900 MOD CELLACBAR
CellAcBar AcBarTimeForCall barring time for
LTE LST CELLACBAR
originating call
 AC11 barring state BTS3900, BTS3900 MOD CELLACBAR
CellAcBar AC11BarforCall
for originating call LTE LST CELLACBAR

AC12 barring state BTS3900, BTS3900 MOD CELLACBAR

CellAcBar AC12BarforCall
for originating call LTE LST CELLACBAR
 AC13 barring state BTS3900, BTS3900 MOD CELLACBAR
CellAcBar AC13BarforCall
for originating call LTE LST CELLACBAR

AC14 barring state BTS3900, BTS3900 MOD CELLACBAR

CellAcBar AC14BarforCall
for originating call LTE LST CELLACBAR
 AC15 barring state BTS3900, BTS3900 MOD CELLACBAR
CellAcBar AC15BarforCall
for originating call LTE LST CELLACBAR

AC barring for
AcBarringForMoSig BTS3900, BTS3900 MOD CELLACBAR
CellAcBar mobile signal
CfgInd LTE LST CELLACBAR
configure indicator
 AcBarringFactorFor Access probability BTS3900, BTS3900 MOD CELLACBAR
CellAcBar
Sig factor for signaling LTE LST CELLACBAR

Mean access
BTS3900, BTS3900 MOD CELLACBAR
CellAcBar AcBarTimeForSig barring time for
LTE LST CELLACBAR
signaling
 AC11 barring state BTS3900, BTS3900 MOD CELLACBAR
CellAcBar AC11BarForSig
for signaling LTE LST CELLACBAR

AC12 barring state BTS3900, BTS3900 MOD CELLACBAR

CellAcBar AC12BarForSig
for signaling LTE LST CELLACBAR
 AC13 barring state BTS3900, BTS3900 MOD CELLACBAR
CellAcBar AC13BarForSig
for signaling LTE LST CELLACBAR

AC14 barring state BTS3900, BTS3900 MOD CELLACBAR

CellAcBar AC14BarForSig
for signaling LTE LST CELLACBAR
 AC15 barring state BTS3900, BTS3900 MOD CELLACBAR
CellAcBar AC15BarForSig
for signaling LTE LST CELLACBAR

AC barring for
AcBarForMVoiceCf BTS3900, BTS3900 MOD CELLACBAR
CellAcBar MMTEL voice
gInd LTE LST CELLACBAR
configure indicator
 Access probability
AcBarFactorForMV BTS3900, BTS3900 MOD CELLACBAR
CellAcBar factor for MMTEL
oice LTE LST CELLACBAR
voice

Mean access
AcBarTimeForMVoi BTS3900, BTS3900 MOD CELLACBAR
CellAcBar barring time for
ce LTE LST CELLACBAR
MMTEL voice
 AC 11-15 barring
SpecialACBarForM BTS3900, BTS3900 MOD CELLACBAR
CellAcBar state for MMTEL
Voice LTE LST CELLACBAR
voice

AC barring for
AcBarForMVideoCf BTS3900, BTS3900 MOD CELLACBAR
CellAcBar MMTEL video
gInd LTE LST CELLACBAR
configure indicator
 Access probability
AcBarFactorForMVi BTS3900, BTS3900 MOD CELLACBAR
CellAcBar factor for MMTEL
deo LTE LST CELLACBAR
video

Mean access
AcBarTimeForMVid BTS3900, BTS3900 MOD CELLACBAR
CellAcBar barring time for
eo LTE LST CELLACBAR
MMTEL video
 AC 11-15 barring
SpecialACBarForM BTS3900, BTS3900 MOD CELLACBAR
CellAcBar state for MMTEL
Video LTE LST CELLACBAR
video

AC barring for
AcBarForCsfbCfgIn BTS3900, BTS3900 MOD CELLACBAR
CellAcBar CSFB configure
d LTE LST CELLACBAR
indicator
 AcBarFactorForCsf Access probability BTS3900, BTS3900 MOD CELLACBAR
CellAcBar
b factor for CSFB LTE LST CELLACBAR

Mean access
BTS3900, BTS3900 MOD CELLACBAR
CellAcBar AcBarTimeForCsfb barring time for
LTE LST CELLACBAR
CSFB
 SpecialACBarForCs AC 11-15 barring BTS3900, BTS3900 MOD CELLACBAR
CellAcBar
fb state for CSFB LTE LST CELLACBAR
 VoLTE Preference
BTS3900, BTS3900 MOD CELLACBAR
CellAcBar VoLTEPreferCfgInd Configuration
LTE LST CELLACBAR
Indication

LST CELLACCESS
BTS3900, BTS3900
CellAccess LocalCellId Local cell ID MOD
LTE
CELLACCESS

MOD
BTS3900, BTS3900
CellAccess CellBarred Cell barring state CELLACCESS
LTE
LST CELLACCESS
 Intra-frequency MOD
BTS3900, BTS3900
CellAccess IntraFreqResel reselection CELLACCESS
LTE
indication LST CELLACCESS

MOD
Plmn Broadcast BTS3900, BTS3900
CellAccess BroadcastMode CELLACCESS
Mode LTE
LST CELLACCESS

MOD
Plmn Round BTS3900, BTS3900
CellAccess RoundPeriod CELLACCESS
Broadcast Period LTE
LST CELLACCESS
 MOD
Plmn Round Action BTS3900, BTS3900
CellAccess RoundActionTime CELLACCESS
Time LTE
LST CELLACCESS

Repeat MOD
BTS3900, BTS3900
CellAccess ReptSyncAvoidInd Synchronization CELLACCESS
LTE
Avoid Indication LST CELLACCESS
 Repeat MOD
ReptSyncAvoidTim BTS3900, BTS3900
CellAccess Synchronization CELLACCESS
e LTE
Avoid Time LST CELLACCESS

ADD CELLOP
DSP
CELLBROADCAST
BTS3900, BTS3900
CellOp LocalCellId Local cell ID CNOPERATOR
LTE
LST CELLOP
MOD CELLOP
RMV CELLOP

ADD CELLOP
Local tracking area BTS3900, BTS3900 LST CELLOP
CellOp TrackingAreaId
ID LTE MOD CELLOP
RMV CELLOP
 ADD CELLOP
Cell reserved for BTS3900, BTS3900
CellOp CellReservedForOp MOD CELLOP
operator LTE
LST CELLOP
 ADD CELLOP
Operator uplink RB BTS3900, BTS3900
CellOp OpUlRbUsedRatio MOD CELLOP
used ratio LTE
LST CELLOP
 ADD CELLOP
Operator downlink BTS3900, BTS3900
CellOp OpDlRbUsedRatio MOD CELLOP
RB used ratio LTE
LST CELLOP
 ADD CELLOP
MME configure BTS3900, BTS3900
CellOp MMECfgNum MOD CELLOP
number LTE
LST CELLOP
 ADD CELLOP
First MME group BTS3900, BTS3900
CellOp MMEGI1 MOD CELLOP
identity LTE
LST CELLOP
 ADD CELLOP
BTS3900, BTS3900
CellOp MMEC1 First MME code MOD CELLOP
LTE
LST CELLOP
 ADD CELLOP
Second MME group BTS3900, BTS3900
CellOp MMEGI2 MOD CELLOP
identity LTE
LST CELLOP
 ADD CELLOP
BTS3900, BTS3900
CellOp MMEC2 Second MME code MOD CELLOP
LTE
LST CELLOP
 ADD CELLOP
Third MME group BTS3900, BTS3900
CellOp MMEGI3 MOD CELLOP
identity LTE
LST CELLOP
 ADD CELLOP
BTS3900, BTS3900
CellOp MMEC3 Third MME code MOD CELLOP
LTE
LST CELLOP
 ADD CELLOP
Fourth MME group BTS3900, BTS3900
CellOp MMEGI4 MOD CELLOP
identity LTE
LST CELLOP
 ADD CELLOP
BTS3900, BTS3900
CellOp MMEC4 Fourth MME code MOD CELLOP
LTE
LST CELLOP

ADD CELLOP
Operator Ue BTS3900, BTS3900
CellOp OpUeNumRatio MOD CELLOP
Number Ratio LTE
LST CELLOP
 Operator PTT UL ADD CELLOP
BTS3900, BTS3900
CellOp OpPttUlRbHighThd RB Utilization High MOD CELLOP
LTE
Thd LST CELLOP

Operator PTT UL ADD CELLOP

BTS3900, BTS3900
CellOp OpPttUlRbLowThd RB Utilization Low MOD CELLOP
LTE
Thd LST CELLOP
 Operator PTT DL ADD CELLOP
BTS3900, BTS3900
CellOp OpPttDlRbHighThd RB Utilization High MOD CELLOP
LTE
Thd LST CELLOP

Operator PTT DL ADD CELLOP

BTS3900, BTS3900
CellOp OpPttDlRbLowThd RB Utilization Low MOD CELLOP
LTE
Thd LST CELLOP

DSP
BroadcastCnOperat Broadcast CN BTS3900, BTS3900
CellOp CELLBROADCAST
orId operator ID LTE
CNOPERATOR
 BTS3900, BTS3900 LST CELLRESEL
CellResel LocalCellId Local cell ID
LTE MOD CELLRESEL

Hysteresis value for BTS3900, BTS3900 MOD CELLRESEL

CellResel Qhyst
ranking criteria LTE LST CELLRESEL

Speed-dependent
SpeedDepReselCfg reselection BTS3900, BTS3900 MOD CELLRESEL
CellResel
Ind parameter LTE LST CELLRESEL
configure indicator

The duration for

evaluating criteria BTS3900, BTS3900 MOD CELLRESEL
CellResel TEvaluation
to enter mobility LTE LST CELLRESEL
states
 Additional time
BTS3900, BTS3900 MOD CELLRESEL
CellResel THystNormal hysteresis for
LTE LST CELLRESEL
normal speed

The number of cell

NCellChangeMediu changes to enter BTS3900, BTS3900 MOD CELLRESEL
CellResel
m medium mobility LTE LST CELLRESEL
state
 The number of cell
BTS3900, BTS3900 MOD CELLRESEL
CellResel NCellChangeHigh changes to enter
LTE LST CELLRESEL
high mobility state

Additional
BTS3900, BTS3900 MOD CELLRESEL
CellResel QHystSfMedium hysteresis for
LTE LST CELLRESEL
medium speed

Additional
BTS3900, BTS3900 MOD CELLRESEL
CellResel QHystSfHigh hysteresis for high
LTE LST CELLRESEL
speed
 Threshold for non-
SNonIntraSearchCf intra freq BTS3900, BTS3900 MOD CELLRESEL
CellResel
gInd measurements LTE LST CELLRESEL
configure indicator

Threshold for non-

BTS3900, BTS3900 MOD CELLRESEL
CellResel SNonIntraSearch intra frequency
LTE LST CELLRESEL
measurements
 Serving frequency
BTS3900, BTS3900 MOD CELLRESEL
CellResel ThrshServLow lower priority
LTE LST CELLRESEL
threshold

Cell reselection BTS3900, BTS3900 MOD CELLRESEL

CellResel CellReselPriority
priority LTE LST CELLRESEL
 Minimum required BTS3900, BTS3900 MOD CELLRESEL
CellResel QRxLevMin
RX level LTE LST CELLRESEL

Ue max power
BTS3900, BTS3900 MOD CELLRESEL
CellResel PMaxCfgInd allowed configure
LTE LST CELLRESEL
indicator
 Max transmit power BTS3900, BTS3900 MOD CELLRESEL
CellResel PMax
allowed LTE LST CELLRESEL

Threshold for intra

BTS3900, BTS3900 MOD CELLRESEL
CellResel SIntraSearchCfgInd freq measurements
LTE LST CELLRESEL
configure indicator

Threshold for intra

BTS3900, BTS3900 MOD CELLRESEL
CellResel SIntraSearch frequency
LTE LST CELLRESEL
measurements

Measurement
MeasBandWidthCfg BTS3900, BTS3900 MOD CELLRESEL
CellResel bandwidth
Ind LTE LST CELLRESEL
configure indicator
 Measurement BTS3900, BTS3900 MOD CELLRESEL
CellResel MeasBandWidth
bandwidth LTE LST CELLRESEL

Cell reselection
BTS3900, BTS3900 MOD CELLRESEL
CellResel TReselEutran timer value for
LTE LST CELLRESEL
EUTRAN

Speed state scale

SpeedStateSfCfgIn BTS3900, BTS3900 MOD CELLRESEL
CellResel factor configure
d LTE LST CELLRESEL
indicator
 Scaling factor of
TReselEutranSfMe TReselEutran in BTS3900, BTS3900 MOD CELLRESEL
CellResel
dium medium mobility LTE LST CELLRESEL
state

Scaling factor of
TReselEutranSfHig BTS3900, BTS3900 MOD CELLRESEL
CellResel TReselEutran in
h LTE LST CELLRESEL
high mobility state
 Neighbor Cell BTS3900, BTS3900 MOD CELLRESEL
CellResel NeighCellConfig
Configuration LTE LST CELLRESEL

PresenceAntennaP Presence antenna BTS3900, BTS3900 MOD CELLRESEL

CellResel
ort1 port1 LTE LST CELLRESEL
 RSRQ Threshold
BTS3900, BTS3900 MOD CELLRESEL
CellResel SIntraSearchQ for intra frequency
LTE LST CELLRESEL
measurements

RSRQ Threshold
for non-intra BTS3900, BTS3900 MOD CELLRESEL
CellResel SNonIntraSearchQ
frequency LTE LST CELLRESEL
measurements

Serving frequency
ThrshServLowQCfg lower priority RSRQ BTS3900, BTS3900 MOD CELLRESEL
CellResel
Ind threshold configure LTE LST CELLRESEL
indicator

Serving frequency
BTS3900, BTS3900 MOD CELLRESEL
CellResel ThrshServLowQ lower priority RSRQ
LTE LST CELLRESEL
threshold
 Minimum required
BTS3900, BTS3900 MOD CELLRESEL
CellResel QQualMinCfgInd quality level
LTE LST CELLRESEL
configure indicator

Minimum required BTS3900, BTS3900 MOD CELLRESEL

CellResel QQualMin
quality level LTE LST CELLRESEL
 ADD
CELLRESELCDMA
2000
LST
CELLRESELCDMA
CellReselCdma200 BTS3900, BTS3900 2000
LocalCellId Local cell ID
0 LTE MOD
CELLRESELCDMA
2000
RMV
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
System time MOD
CellReselCdma200 BTS3900, BTS3900
SysTimeCfgInd information CELLRESELCDMA
0 LTE
configure indicator 2000
LST
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
CDMA and EUTRA
MOD
CellReselCdma200 network BTS3900, BTS3900
CdmaEutraSyn CELLRESELCDMA
0 synchronised LTE
2000
indicator
LST
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
CDMA search MOD
CellReselCdma200 SearchWndSizeCfg BTS3900, BTS3900
window size CELLRESELCDMA
0 Ind LTE
configure indicator 2000
LST
CELLRESELCDMA
2000
 ADD
CELLRESELCDMA
2000
MOD
CellReselCdma200 BTS3900, BTS3900
SearchWndSize Search window size CELLRESELCDMA
0 LTE
2000
LST
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
MOD
CellReselCdma200 HRPD parameters BTS3900, BTS3900
HrpdParaCfgInd CELLRESELCDMA
0 configure indicator LTE
2000
LST
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
HRPD cell MOD
CellReselCdma200 HrpdCellReselectP BTS3900, BTS3900
reselection CELLRESELCDMA
0 aramCfgInd LTE
configure indicator 2000
LST
CELLRESELCDMA
2000
 ADD
CELLRESELCDMA
2000
MOD
CellReselCdma200 Cell reselection BTS3900, BTS3900
TreselectionHrpd CELLRESELCDMA
0 timer for HRPD LTE
2000
LST
CELLRESELCDMA
2000
 ADD
CELLRESELCDMA
2000
Speed state scale MOD
CellReselCdma200 SpeedStateSfCfgIn BTS3900, BTS3900
factor configure CELLRESELCDMA
0 d LTE
indicator 2000
LST
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
Scaling factor of
MOD
CellReselCdma200 TReselCdmaHrpdSf TReselCdmaHrpd BTS3900, BTS3900
CELLRESELCDMA
0 High in high mobility LTE
2000
state
LST
CELLRESELCDMA
2000
 ADD
CELLRESELCDMA
2000
Scaling factor of
MOD
CellReselCdma200 TReselCdmaHrpdSf TReselCdmaHrpd BTS3900, BTS3900
CELLRESELCDMA
0 Medium in medium mobility LTE
2000
state
LST
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
MOD
CellReselCdma200 Cdma1XrttParaCfgI 1XRTT parameters BTS3900, BTS3900
CELLRESELCDMA
0 nd configure indicator LTE
2000
LST
CELLRESELCDMA
2000
 ADD
CELLRESELCDMA
2000
1XRTT state of long
MOD
CellReselCdma200 Cdma1XrttLongCod code generation BTS3900, BTS3900
CELLRESELCDMA
0 eStateCfgInd registers configure LTE
2000
indicator
LST
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
1XRTT cell MOD
CellReselCdma200 Cdma1XrttCellRese BTS3900, BTS3900
reselection CELLRESELCDMA
0 lCfgInd LTE
configure indicator 2000
LST
CELLRESELCDMA
2000
 ADD
CELLRESELCDMA
2000
MOD
CellReselCdma200 Cdma1XrttTreselect Cell reselection BTS3900, BTS3900
CELLRESELCDMA
0 ion timer for 1XRTT LTE
2000
LST
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
1XRTT speed state MOD
CellReselCdma200 Cdma1XrttSpeedSt BTS3900, BTS3900
scale factors CELLRESELCDMA
0 ateCfgInd LTE
configure indicator 2000
LST
CELLRESELCDMA
2000
 ADD
CELLRESELCDMA
2000
MOD
CellReselCdma200 Cdma1XrttSfMediu 1XRTT medium BTS3900, BTS3900
CELLRESELCDMA
0 m speed scale factor LTE
2000
LST
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
MOD
CellReselCdma200 1XRTT high speed BTS3900, BTS3900
Cdma1XrttSfHigh CELLRESELCDMA
0 scale factor LTE
2000
LST
CELLRESELCDMA
2000

ADD
CELLRESELCDMA
2000
MOD
CellReselCdma200 SupportDualRxCsfb Dual Rx CSFB BTS3900, BTS3900
CELLRESELCDMA
0 CfgInd configure indicator LTE
2000
LST
CELLRESELCDMA
2000
 ADD
CELLRESELCDMA
2000
Dual Rx CSFB MOD
CellReselCdma200 BTS3900, BTS3900
SupportDualRxCsfb supported CELLRESELCDMA
0 LTE
indication 2000
LST
CELLRESELCDMA
2000

ADD
CELLRESELGERA
N
LST
CELLRESELGERA
BTS3900, BTS3900 N
CellReselGeran LocalCellId Local cell ID
LTE MOD
CELLRESELGERA
N
RMV
CELLRESELGERA
N

ADD
CELLRESELGERA
N
Cell reselection MOD
BTS3900, BTS3900
CellReselGeran TReselGeran timer value for CELLRESELGERA
LTE
GERAN N
LST
CELLRESELGERA
N
 ADD
CELLRESELGERA
N
Speed state scale MOD
SpeedStateSfCfgIn BTS3900, BTS3900
CellReselGeran factor configure CELLRESELGERA
d LTE
indicator N
LST
CELLRESELGERA
N

ADD
CELLRESELGERA
N
Scaling factor of
MOD
TReselGeranSfMed TReselGeran in BTS3900, BTS3900
CellReselGeran CELLRESELGERA
ium medium mobility LTE
N
state
LST
CELLRESELGERA
N

ADD
CELLRESELGERA
N
Scaling factor of MOD
BTS3900, BTS3900
CellReselGeran TReselGeranSfHigh TReselGeran in CELLRESELGERA
LTE
high mobility state N
LST
CELLRESELGERA
N

CELLRESELUTRA
N
LST
CELLRESELUTRA
BTS3900, BTS3900 N
CellReselUtran LocalCellId Local cell ID
LTE MOD
CELLRESELUTRA
N
RMV
CELLRESELUTRA
 ADD
CELLRESELUTRA
N
Cell reselection MOD
BTS3900, BTS3900
CellReselUtran TReselUtran timer value for CELLRESELUTRA
LTE
UTRAN N
LST
CELLRESELUTRA
N

CELLRESELUTRA
N
Speed state scale MOD
SpeedStateSfCfgIn BTS3900, BTS3900
CellReselUtran factor configure CELLRESELUTRA
d LTE
indicator N
LST
CELLRESELUTRA

ADD
CELLRESELUTRA
N
Scaling factor of
MOD
TReselUtranSfMedi TReselUtran in BTS3900, BTS3900
CellReselUtran CELLRESELUTRA
um medium mobility LTE
N
state
LST
CELLRESELUTRA
N
 ADD
CELLRESELUTRA
N
Scaling factor of MOD
BTS3900, BTS3900
CellReselUtran TReselUtranSfHigh TReselUtran in high CELLRESELUTRA
LTE
mobility state N
LST
CELLRESELUTRA
N

BTS3900, BTS3900 LST CELLSEL

CellSel LocalCellId Local cell ID
LTE MOD CELLSEL

Minimum required BTS3900, BTS3900 MOD CELLSEL

CellSel QRxLevMin
RX level LTE LST CELLSEL
 Minimum required BTS3900, BTS3900 MOD CELLSEL
CellSel QRxLevMinOffset
RX level offset LTE LST CELLSEL

Minimum required BTS3900, BTS3900 MOD CELLSEL

CellSel QQualMin
RX quality level LTE LST CELLSEL

Minimum required
QQualMinOffsetCfg RX quality level BTS3900, BTS3900 MOD CELLSEL
CellSel
Ind offset configure LTE LST CELLSEL
indicator
 Minimum required
BTS3900, BTS3900 MOD CELLSEL
CellSel QQualMinOffset RX quality level
LTE LST CELLSEL
offset

BTS3900, BTS3900 LST CELLSIMAP

CellSiMap LocalCellId Local cell ID
LTE MOD CELLSIMAP

SIB mapping SI BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap SiMapSwitch
algorithm switch LTE LST CELLSIMAP
 BTS3900, BTS3900 MOD CELLSIMAP
CellSiMap Sib2Period SIB2 period
LTE LST CELLSIMAP

BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap Sib3Period SIB3 period
LTE LST CELLSIMAP

BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap Sib4Period SIB4 period
LTE LST CELLSIMAP
 BTS3900, BTS3900 MOD CELLSIMAP
CellSiMap Sib5Period SIB5 period
LTE LST CELLSIMAP

BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap Sib6Period SIB6 period
LTE LST CELLSIMAP

BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap Sib7Period SIB7 period
LTE LST CELLSIMAP
 BTS3900, BTS3900 MOD CELLSIMAP
CellSiMap Sib8Period SIB8 period
LTE LST CELLSIMAP

BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap Sib10Period SIB10 period
LTE LST CELLSIMAP

BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap Sib11Period SIB11 period
LTE LST CELLSIMAP
 ETWS PN message BTS3900, BTS3900 MOD CELLSIMAP
CellSiMap EtwsPnDuration
duration time LTE LST CELLSIMAP

EtwsSnOverlapPoli ETWS SN message BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap
cy overlap policy LTE LST CELLSIMAP
 EtwsPnOverlapPoli ETWS PN message BTS3900, BTS3900 MOD CELLSIMAP
CellSiMap
cy overlap policy LTE LST CELLSIMAP

BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap Sib12Period SIB12 period
LTE LST CELLSIMAP
 Effective code rate BTS3900, BTS3900 MOD CELLSIMAP
CellSiMap SiTransEcr
for SI transmission LTE LST CELLSIMAP

BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap Sib13Period SIB13 period
LTE LST CELLSIMAP

BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap Sib15Period SIB15 period
LTE LST CELLSIMAP
 BTS3900, BTS3900 MOD CELLSIMAP
CellSiMap Sib16Period SIB16 period
LTE LST CELLSIMAP

SIB Transmission BTS3900, BTS3900 MOD CELLSIMAP

CellSiMap SibTransCtrlSwitch
Control Switch LTE LST CELLSIMAP
 System Information
BTS3900, BTS3900 MOD CELLSIMAP
CellSiMap SiSchResRatio Scheduling
LTE LST CELLSIMAP
Resource Ratio

LST
BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm LocalCellId Local cell ID
LTE MOD
CELLULPCCOMM
 MOD
BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm PassLossCoeff Path loss coefficient
LTE LST
CELLULPCCOMM

MOD
BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm P0NominalPUCCH P0 nominal PUCCH
LTE LST
CELLULPCCOMM
 MOD
BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm P0NominalPUSCH P0 nominal PUSCH
LTE LST
CELLULPCCOMM

MOD
DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm
at1 format 1 LTE LST
CELLULPCCOMM

MOD
DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm
at1b format 1b LTE LST
CELLULPCCOMM
 MOD
DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm
at2 format 2 LTE LST
CELLULPCCOMM

MOD
DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm
at2a format 2a LTE LST
CELLULPCCOMM

MOD
DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm
at2b format 2b LTE LST
CELLULPCCOMM
 MOD
DeltaPreambleMsg Delta preamble BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm
3 value for msg3 LTE LST
CELLULPCCOMM

MOD
BTS3900, BTS3900 CELLULPCCOMM
CellUlpcComm DeltaMsg2 Delta Message 2
LTE LST
CELLULPCCOMM

LST
ENBCELLOPRSVD
eNBCellOpRsvdPar BTS3900, BTS3900 PARA
LocalCellId Local cell ID
a LTE MOD
ENBCELLOPRSVD
PARA
 LST
ENBCELLOPRSVD
eNBCellOpRsvdPar Local tracking area BTS3900, BTS3900 PARA
TrackingAreaId
a ID LTE MOD
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved Switch BTS3900, BTS3900 PARA
RsvdSwPara0
a Parameter 0 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved Switch BTS3900, BTS3900 PARA
RsvdSwPara1
a Parameter 1 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved Switch BTS3900, BTS3900 PARA
RsvdSwPara2
a Parameter 2 LTE LST
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara2
a Parameter 2 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara3
a Parameter 3 LTE LST
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara4
a Parameter 4 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara5
a Parameter 5 LTE LST
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara6
a Parameter 6 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara7
a Parameter 7 LTE LST
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara8
a Parameter 8 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara9
a Parameter 9 LTE LST
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara10
a Parameter 10 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara11
a Parameter 11 LTE LST
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara12
a Parameter 12 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara13
a Parameter 13 LTE LST
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara14
a Parameter 14 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara15
a Parameter 15 LTE LST
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara16
a Parameter 16 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara17
a Parameter 17 LTE LST
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara18
a Parameter 18 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara19
a Parameter 19 LTE LST
ENBCELLOPRSVD
PARA

MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara20
a Parameter 20 LTE LST
ENBCELLOPRSVD
PARA
 MOD
ENBCELLOPRSVD
eNBCellOpRsvdPar Reserved BTS3900, BTS3900 PARA
RsvdPara21
a Parameter 21 LTE LST
ENBCELLOPRSVD
PARA

EUCELLPRIBBEQ
M
LST
EUCELLPRIBBEQ
BTS3900, BTS3900 M
EuCellPriBBEqm LocalCellId Local cell ID
LTE MOD
EUCELLPRIBBEQ
M
RMV
EUCELLPRIBBEQ
 ADD
EUCELLPRIBBEQ
M
MOD
Primary Baseband BTS3900, BTS3900
EuCellPriBBEqm PriBaseBandEqmId EUCELLPRIBBEQ
Equipment ID LTE
M
LST
EUCELLPRIBBEQ
M

ADD
EUCELLSECTORE
QM
LST
EUCELLSECTORE
QM
BTS3900, BTS3900
eUCellSectorEqm LocalCellId Local cell ID MOD
LTE
EUCELLSECTORE
QM
RMV
EUCELLSECTORE
QM
DSP EURTWP

ADD
EUCELLSECTORE
QM
DSP EURTWP
LST
EUCELLSECTORE
Sector equipment BTS3900, BTS3900
eUCellSectorEqm SectorEqmId QM
ID LTE
MOD
EUCELLSECTORE
QM
RMV
EUCELLSECTORE
QM
 ADD
EUCELLSECTORE
QM
MOD
ReferenceSignalPw Reference signal BTS3900, BTS3900
eUCellSectorEqm EUCELLSECTORE
r power LTE
QM
LST
EUCELLSECTORE
QM

ADD
EUCELLSECTORE
QM
MOD
Baseband BTS3900, BTS3900
eUCellSectorEqm BaseBandEqmId EUCELLSECTORE
equipment ID LTE
QM
LST
EUCELLSECTORE
QM
 BTS3900, BTS3900
eUCellSectorEqm CN RRU Cabinet No. DSP EURTWP
LTE

BTS3900, BTS3900
eUCellSectorEqm SRN RRU Subrack No. DSP EURTWP
LTE

BTS3900, BTS3900
eUCellSectorEqm SN RRU Slot No. DSP EURTWP
LTE

Received total BTS3900, BTS3900

eUCellSectorEqm EuRTWP DSP EURTWP
wideband power LTE

BTS3900, BTS3900
eUCellSectorEqm RXNO RX Channels No. DSP EURTWP
LTE
 ADD
EUCELLSECTORE
QM
MOD
ReferenceSignalPw Reference Signal BTS3900, BTS3900
eUCellSectorEqm EUCELLSECTORE
rMargin Power Margin LTE
QM
LST
EUCELLSECTORE
QM
 ADD
EUCELLSECTORE
QM
MOD
SectorCpriCompres Sector CPRI BTS3900, BTS3900
eUCellSectorEqm EUCELLSECTORE
sion Compression LTE
QM
LST
EUCELLSECTORE
QM

BTS3900, BTS3900
eUCellSectorEqm eNodeBId eNodeB ID DSP EURTWP
LTE

ADD
EUCELLSECTORE
QM
MOD
BTS3900, BTS3900
eUCellSectorEqm AutoCfgFlag Auto Config Flag EUCELLSECTORE
LTE
QM
LST
EUCELLSECTORE
QM
 ADD
EUCELLSECTORE
QM
MOD
BTS3900, BTS3900
eUCellSectorEqm WeightNO Weight Number EUCELLSECTORE
LTE
QM
LST
EUCELLSECTORE
QM

ADD
EUSECTOREQMG
ROUP
ADD
EUSECTOREQMID
2GROUP
LST
EUSECTOREQMG
ROUP
LST
EuSectorEqmGrou BTS3900, BTS3900
LocalCellId Local cell ID EUSECTOREQMID
p LTE
2GROUP
MOD
EUSECTOREQMG
ROUP
RMV
EUSECTOREQMG
ROUP
RMV
EUSECTOREQMID
2GROUP
 ADD
EUSECTOREQMG
ROUP
ADD
EUSECTOREQMID
2GROUP
LST
EUSECTOREQMG
ROUP
LST
EuSectorEqmGrou Sector Equipment BTS3900, BTS3900
SectorEqmGroupId EUSECTOREQMID
p Group ID LTE
2GROUP
MOD
EUSECTOREQMG
ROUP
RMV
EUSECTOREQMG
ROUP
RMV
EUSECTOREQMID
2GROUP

LST
EuSectorEqmGrou Sector Equipment BTS3900, BTS3900
SectorEqmRef EUSECTOREQMID
p Reference LTE
2GROUP

ADD
EUSECTOREQMID
2GROUP
RMV
EuSectorEqmGrou SectorEqmRefType. Sector equipment BTS3900, BTS3900
EUSECTOREQMID
p SectorEqmId ID LTE
2GROUP
LST
EUSECTOREQMID
2GROUP
 ADD
EUSECTOREQMG
ROUP
MOD
EuSectorEqmGrou Baseband BTS3900, BTS3900
BaseBandEqmId EUSECTOREQMG
p equipment ID LTE
ROUP
LST
EUSECTOREQMG
ROUP
 ADD
EUSECTOREQMG
ROUP
MOD
EuSectorEqmGrou ReferenceSignalPw Reference signal BTS3900, BTS3900
EUSECTOREQMG
p r power LTE
ROUP
LST
EUSECTOREQMG
ROUP
 ADD
EUSECTOREQMG
ROUP
MOD
EuSectorEqmGrou SectorGroupCpriCo Sector Group CPRI BTS3900, BTS3900
EUSECTOREQMG
p mpression Compression LTE
ROUP
LST
EUSECTOREQMG
ROUP

ADD
EUSECTOREQMG
ROUP
MOD
EuSectorEqmGrou BTS3900, BTS3900
AutoCfgFlag Auto Config Flag EUSECTOREQMG
p LTE
ROUP
LST
EUSECTOREQMG
ROUP

BTS3900, BTS3900
IbdlInfo LocalCellId Local cell ID DSP IBDLINFO
LTE
 BTS3900, BTS3900
IbdlInfo eNodeBId Connect eNodeB ID DSP IBDLINFO
LTE

RRU/RFU Cabinet BTS3900, BTS3900

IbdlInfo CN DSP IBDLINFO
No. LTE

RRU/RFU Subrack BTS3900, BTS3900

IbdlInfo SRN DSP IBDLINFO
No. LTE

BTS3900, BTS3900
IbdlInfo SN RRU/RFU Slot No. DSP IBDLINFO
LTE

Number of BBP BTS3900, BTS3900

IbdlInfo IBDLNum DSP IBDLINFO
Data Links LTE

BTS3900, BTS3900
IbdlInfo IBDLId BBP Data Link ID DSP IBDLINFO
LTE

BBP Data Link BTS3900, BTS3900

IbdlInfo IBDLStatus DSP IBDLINFO
Status LTE

BTS3900, BTS3900
IbdlInfo OdiId ODI ID DSP IBDLINFO
LTE

BBP Data Link BTS3900, BTS3900

IbdlInfo IBDLInPortId DSP IBDLINFO
Input Port No. LTE

BBP Data Link BTS3900, BTS3900

IbdlInfo IBDLOutPortId DSP IBDLINFO
Output Port No. LTE

IBDLLoopbackDela BBP Data Link BTS3900, BTS3900

IbdlInfo DSP IBDLINFO
y Loopback Delay LTE

BBP Data Link

IBDLLoopbackTime BTS3900, BTS3900
IbdlInfo Loopback Timeout DSP IBDLINFO
outNum LTE
Counter

BTS3900, BTS3900
IbdlInfo BoardCabinetNo Board Cabinet No. DSP IBDLINFO
LTE
 BTS3900, BTS3900
IbdlInfo BoardSubrackNo Board Subrack No. DSP IBDLINFO
LTE

BTS3900, BTS3900
IbdlInfo BoardSlotNo Board Slot No. DSP IBDLINFO
LTE

BTS3900, BTS3900
IbdlInfo BbpDataLinkType BBP Data Link Type DSP IBDLINFO
LTE

TimeAlignmentTime BTS3900, BTS3900 LST TATIMER

LocalCellId Local cell ID
r LTE MOD TATIMER
TimeAlignmentTime TimeAlignmentTime Uplink time BTS3900, BTS3900 MOD TATIMER
r r alignment timer LTE LST TATIMER
 Uplink timing
TimeAlignmentTime TimingAdvCmdOpt BTS3900, BTS3900 MOD TATIMER
advance command
r Switch LTE LST TATIMER
optimization switch
TimeAlignmentTime Timing BTS3900, BTS3900 MOD TATIMER
TimingMeasMode
r Measurement Mode LTE LST TATIMER
TimeAlignmentTime TA Command BTS3900, BTS3900 MOD TATIMER
TACmdSendPeriod
r Sending Period LTE LST TATIMER
TimeAlignmentTime TimingResOptSwitc Timing Resource BTS3900, BTS3900 MOD TATIMER
r h Optimization Switch LTE LST TATIMER

Pucch Timing Offset

TimeAlignmentTime PucchTimeOffsetCo BTS3900, BTS3900 MOD TATIMER
Compensation
r mpVal LTE LST TATIMER
Value
TimeAlignmentTime BTS3900, BTS3900 MOD TATIMER
TaEnhance TA Enhancement
r LTE LST TATIMER

LST
BTS3900, BTS3900 UETIMERCONST
UeTimerConst LocalCellId Local cell ID
LTE MOD
UETIMERCONST
 MOD
BTS3900, BTS3900 UETIMERCONST
UeTimerConst T300 Timer 300
LTE LST
UETIMERCONST

MOD
BTS3900, BTS3900 UETIMERCONST
UeTimerConst T301 Timer 301
LTE LST
UETIMERCONST
 MOD
BTS3900, BTS3900 UETIMERCONST
UeTimerConst T310 Timer 310
LTE LST
UETIMERCONST

MOD
BTS3900, BTS3900 UETIMERCONST
UeTimerConst T311 Timer 311
LTE LST
UETIMERCONST
 MOD
BTS3900, BTS3900 UETIMERCONST
UeTimerConst N311 Constant N311
LTE LST
UETIMERCONST

MOD
BTS3900, BTS3900 UETIMERCONST
UeTimerConst N310 Constant N310
LTE LST
UETIMERCONST

MOD
BTS3900, BTS3900 UETIMERCONST
UeTimerConst T325 Timer 325
LTE LST
UETIMERCONST
 ADD CELL
ADD CELLBAND
BLK CELL
DEA CELL
DSP CELL
DSP
CELLCALIBRATIO
N
DSP
CELLCAMCSTATU
S
DSP
CELLPHYTOPO
DSP
CELLULCOMPCLU
STER
DSP LIOPTRULE
DSP
BTS3900, BTS3900
Cell LocalCellId Local Cell ID PRIBBPADJUST
LTE
LST CELL
LST CELLBAND
MOD CELL
RMV CELL
RMV CELLBAND
RMV CELLNRT
STR
CELLRFLOOPBAC
K
STR
CELLSELFTEST
STR LRTWPRTTST
STR
PRIBBPADJUST
UBL CELL
DSP
LRTWPRTTST
DSP

ADD CELL
BTS3900, BTS3900
Cell CellName Cell Name MOD CELL
LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell CsgInd Csg indicator MOD CELL
LTE
LST CELL

ADD CELL
Uplink cyclic prefix BTS3900, BTS3900
Cell UlCyclicPrefix MOD CELL
length LTE
LST CELL
 ADD CELL
Downlink cyclic BTS3900, BTS3900
Cell DlCyclicPrefix MOD CELL
prefix length LTE
LST CELL
 ADD CELL
ADD CELLBAND
BTS3900, BTS3900 LST CELLBAND
Cell FreqBand Frequency band
LTE MOD CELL
RMV CELLBAND
LST CELL

ADD CELL
Uplink EARFCN BTS3900, BTS3900
Cell UlEarfcnCfgInd MOD CELL
indication LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell UlEarfcn Uplink EARFCN MOD CELL
LTE
LST CELL

ADD CELL
BTS3900, BTS3900
Cell DlEarfcn Downlink EARFCN MOD CELL
LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell UlBandWidth Uplink bandwidth MOD CELL
LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell DlBandWidth Downlink bandwidth MOD CELL
LTE
LST CELL

ADD CELL
MOD CELL
BTS3900, BTS3900 DSP
Cell CellId Cell ID
LTE CELLCAMCSTATU
S
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell PhyCellId Physical cell ID MOD CELL
LTE
LST CELL

ADD CELL
AdditionalSpectrum Additional spectrum BTS3900, BTS3900
Cell MOD CELL
Emission emission LTE
LST CELL
 BTS3900, BTS3900
Cell CellActiveState Cell active state LST CELL
LTE
 BTS3900, BTS3900 BLK CELL
Cell CellAdminState Cell admin state
LTE LST CELL

Cell middle block BTS3900, BTS3900 BLK CELL

Cell CellMidBlkTimer
timer LTE LST CELL
 ADD CELL
Cell FDD TDD BTS3900, BTS3900
Cell FddTddInd MOD CELL
indication LTE
LST CELL
 ADD CELL
SubframeAssignme Subframe BTS3900, BTS3900
Cell MOD CELL
nt assignment LTE
LST CELL
 ADD CELL
SpecialSubframePa Special subframe BTS3900, BTS3900
Cell MOD CELL
tterns patterns LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell CellSpecificOffset Cell specific offset MOD CELL
LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell QoffsetFreq Frequency offset MOD CELL
LTE
LST CELL
 ADD CELL
Root sequence BTS3900, BTS3900
Cell RootSequenceIdx MOD CELL
index LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell HighSpeedFlag High speed flag MOD CELL
LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell PreambleFmt Preamble format MOD CELL
LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell CellRadius Cell radius MOD CELL
LTE
LST CELL
 Customized ADD CELL
CustomizedBandWi BTS3900, BTS3900
Cell bandwidth MOD CELL
dthCfgInd LTE
configure indicator LST CELL
 ADD CELL
CustomizedULBand Customized uplink BTS3900, BTS3900
Cell MOD CELL
Width bandwidth LTE
LST CELL
 ADD CELL
CustomizedDLBand Customized BTS3900, BTS3900
Cell MOD CELL
Width downlink bandwidth LTE
LST CELL

ADD CELL
EmergencyAreaIdC Emergency Area Id BTS3900, BTS3900
Cell MOD CELL
fgInd indicator LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell EmergencyAreaId Emergency Area ID MOD CELL
LTE
LST CELL

Ue max power ADD CELL

BTS3900, BTS3900
Cell UePowerMaxCfgInd allowed configure MOD CELL
LTE
indicator LST CELL

ADD CELL
Max transmit power BTS3900, BTS3900
Cell UePowerMax MOD CELL
allowed LTE
LST CELL
 ADD CELL
Flag of Multi-RRU BTS3900, BTS3900
Cell MultiRruCellFlag MOD CELL
Cell LTE
LST CELL
 ADD CELL
Mode of Multi-RRU BTS3900, BTS3900
Cell MultiRruCellMode MOD CELL
Cell LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell CPRICompression CPRI Compression MOD CELL
LTE
LST CELL
 ADD CELL
Physical Cell BTS3900, BTS3900
Cell SectorEqmNum MOD CELL
Number of SFN Cell LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell AirCellFlag Air Cell Flag MOD CELL
LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell CrsPortNum CRS Port Number MOD CELL
LTE
LST CELL
 ADD CELL
Cell transmission BTS3900, BTS3900
Cell TxRxMode MOD CELL
and reception mode LTE
LST CELL

ADD CELL
BTS3900, BTS3900
Cell UserLabel User label MOD CELL
LTE
LST CELL
 ADD CELL
BTS3900, BTS3900
Cell WorkMode Work mode MOD CELL
LTE
LST CELL

ADD CELL
EuCellStandbyMod BTS3900, BTS3900
Cell Cell Standby Mode MOD CELL
e LTE
LST CELL
 ADD CELL
CRS Antenna Port BTS3900, BTS3900
Cell CrsPortMap MOD CELL
Mapping LTE
LST CELL
 ADD CELL
CpriEthCompressio CPRI Ethernet BTS3900, BTS3900
Cell MOD CELL
nRatio Compression Ratio LTE
LST CELL
 BTS3900, BTS3900
Cell CellState Cell instance state DSP CELL
LTE

DSP CELL
Reason for latest BTS3900, BTS3900
Cell CellLatestAvailState STR
state change LTE
PRIBBPADJUST

CellLatestSetupTim Cell latest setup BTS3900, BTS3900

Cell DSP CELL
e time LTE
 CellLatestSetupTyp Cell latest setup BTS3900, BTS3900
Cell DSP CELL
e operate type LTE

CellLatestRemoveT Cell latest remove BTS3900, BTS3900

Cell DSP CELL
ime time LTE
 CellLatestRemoveT Cell latest remove BTS3900, BTS3900
Cell DSP CELL
ype operate type LTE
 CellPowerSaveStat Cell power save BTS3900, BTS3900
Cell DSP CELL
e state LTE

DSP CELL
Primary BBP BTS3900, BTS3900
Cell MainBbpInfo DSP
information LTE
PRIBBPADJUST
 BTS3900, BTS3900
Cell CellTopoType Cell topology type DSP CELL
LTE

STR
RF module cabinet BTS3900, BTS3900
Cell CabinetNo CELLRFLOOPBAC
number LTE
K

STR
RF module subrack BTS3900, BTS3900
Cell SubrackNo CELLRFLOOPBAC
number LTE
K

STR
RF module slot BTS3900, BTS3900
Cell SlotNo CELLRFLOOPBAC
number LTE
K

SymbolShutdownSt Symbol shutdown BTS3900, BTS3900

Cell DSP CELL
ate state LTE
 Maximum transmit BTS3900, BTS3900
Cell MaxTxPower DSP CELL
power LTE

DSP CELL
DSP
BTS3900, BTS3900 CELLCALIBRATIO
Cell eNodeBId eNodeB ID
LTE N
DSP
CELLPHYTOPO

BTS3900, BTS3900 DSP

Cell BbpCabinetNo BBP Cabinet No.
LTE PRIBBPRESINFO

BTS3900, BTS3900 DSP

Cell BbpSubrackNo BBP Subrack No.
LTE PRIBBPRESINFO

BTS3900, BTS3900 DSP

Cell BbpSlotNo BBP Slot No.
LTE PRIBBPRESINFO

BTS3900, BTS3900
Cell Status Work Status DSP CELL
LTE

DSP
Coordinating Local BTS3900, BTS3900
Cell CoLocalCellId CELLULCOMPCLU
Cell ID LTE
STER
 ADD CELLBAND
BTS3900, BTS3900
Cell CellSlaveBand Cell Slave Band LST CELLBAND
LTE
RMV CELLBAND

ADD CELLBAND
MultiBand.FreqBan BTS3900, BTS3900
Cell Frequency band LST CELLBAND
d LTE
RMV CELLBAND
 ADD CELL
CnOpSharingGroup CN Operator BTS3900, BTS3900
Cell MOD CELL
Id Sharing Group ID LTE
LST CELL

DSP CELL
DSP
RF Module BTS3900, BTS3900 CELLCALIBRATIO
Cell RfModuleInfo
Information LTE N
DSP
CELLPHYTOPO

DSP CELL
Served BBP BTS3900, BTS3900
Cell ServedBbpInfo DSP
Information LTE
CELLPHYTOPO

BTS3900, BTS3900 DSP

Cell OneRruCellNum 1 RRU Cell Number
LTE PRIBBPRESINFO

BTS3900, BTS3900 DSP

Cell TwoRruCellNum 2 RRU Cell Number
LTE PRIBBPRESINFO
 BTS3900, BTS3900 DSP
Cell ThreeRruCellNum 3 RRU Cell Number
LTE PRIBBPRESINFO

BTS3900, BTS3900 DSP

Cell FourRruCellNum 4 RRU Cell Number
LTE PRIBBPRESINFO

BTS3900, BTS3900 DSP

Cell FiveRruCellNum 5 RRU Cell Number
LTE PRIBBPRESINFO

BTS3900, BTS3900 DSP

Cell SixRruCellNum 6 RRU Cell Number
LTE PRIBBPRESINFO

BTS3900, BTS3900 DSP

Cell SevenRruCellNum 7 RRU Cell Number
LTE PRIBBPRESINFO
 eUCellSectorEqm(E
eUCellSectorEqmN BTS3900, BTS3900 DSP
Cell uSectorEqmGroup)
um LTE PRIBBPRESINFO
Number

Number of Cells
BTS3900, BTS3900 STR
Cell OpFailCellNum Where Adjustment
LTE PRIBBPADJUST
Fails

Number of Cells
BTS3900, BTS3900 STR
Cell OpSuccCellNum Where Adjustment
LTE PRIBBPADJUST
Succeeds

ADD CELL
CSI Reference BTS3900, BTS3900
Cell CsiRsPeriod MOD CELL
Signals Period LTE
LST CELL
 ConnectedBbpPortI Connected BBP BTS3900, BTS3900 DSP
Cell
nfo Port Information LTE CELLPHYTOPO

DSP CELL
BTS3900, BTS3900 DSP
Cell TxNo TX Channel No.
LTE CELLCALIBRATIO
N
DSP CELL
BTS3900, BTS3900 DSP
Cell RxNo RX Channel No.
LTE CELLCALIBRATIO
N

BbpPrimarySecond Served Bbp Primary BTS3900, BTS3900 DSP

Cell
aryMode Secondary Mode LTE CELLPHYTOPO
 Intra Frequency ADD CELL
IntraFreqRanSharin BTS3900, BTS3900
Cell RAN Sharing MOD CELL
gInd LTE
Indication LST CELL

ADD CELL
IntraFreq ANR BTS3900, BTS3900
Cell IntraFreqAnrInd MOD CELL
Indication LTE
LST CELL
 ADD CELL
SSP6 DwPTS BTS3900, BTS3900
Cell Ssp6DwPTSMode MOD CELL
Mode LTE
LST CELL

ADD CELL
Cell Scale BTS3900, BTS3900
Cell CellScaleInd MOD CELL
Indication LTE
LST CELL
 ADD CELL
ANR Frequency BTS3900, BTS3900
Cell FreqPriorityForAnr MOD CELL
Priority LTE
LST CELL

DSP
Coordinating Cell BTS3900, BTS3900
Cell CoCellRouteType CELLULCOMPCLU
Route Type LTE
STER

DSP
Coordinating Cell BTS3900, BTS3900
Cell CoCellEnodebId CELLULCOMPCLU
eNodeB ID LTE
STER

Coordinating Sector DSP

BTS3900, BTS3900
Cell CoSectorEqmId Equipment(group) CELLULCOMPCLU
LTE
ID STER

Coordinating Sector DSP

BTS3900, BTS3900
Cell CoSectorEnodebId Equipment(group) CELLULCOMPCLU
LTE
eNB ID STER
 ADD CELL
CellRadiusStartLoc Cell Radius Start BTS3900, BTS3900
Cell MOD CELL
ation Location LTE
LST CELL

Anti Interfere Status

InterfHighSpeedSta BTS3900, BTS3900
Cell in High Speed DSP CELL
tus LTE
Scenario

DSP
CELLCALIBRATIO
Serving Sector
BTS3900, BTS3900 N
Cell SrvSectorEqmId Equipment(group)
LTE DSP
ID
CELLULCOMPCLU
STER
 DSP
CELLCALIBRATIO
Serving Sector
SrvSectorEqmEnod BTS3900, BTS3900 N
Cell Equipment(Group)
eBId LTE DSP
eNB ID
CELLULCOMPCLU
STER

DSP
Coordinating Sector BTS3900, BTS3900
Cell CoSectorEqmType CELLULCOMPCLU
Equipment Type LTE
STER

DSP
CELLCALIBRATIO
ServingSectorEqmT Serving Sector BTS3900, BTS3900 N
Cell
ype Equipment Type LTE DSP
CELLULCOMPCLU
STER

DSP
BTS3900, BTS3900
Cell CalibrationResult Calibration Result CELLCALIBRATIO
LTE
N

DSP
BTS3900, BTS3900
Cell CalibrationTime Calibration Time CELLCALIBRATIO
LTE
N

DSP
BTS3900, BTS3900
Cell CalibrationType Calibration Type CELLCALIBRATIO
LTE
N
 DSP
BTS3900, BTS3900
Cell CalibrationIndex Calibration Inde CELLCALIBRATIO
LTE
N

ADD CELL
BTS3900, BTS3900
Cell SpecifiedCellFlag Specified Cell Flag MOD CELL
LTE
LST CELL
 ADD CELL
MultiCellShareMod Multi Cell Share BTS3900, BTS3900
Cell MOD CELL
e Mode LTE
LST CELL

ADD
SFNAUXRESBIND
LST
Sector equipment BTS3900, BTS3900 SFNAUXRESBIND
SfnAuxResBind SectorEqmId
ID LTE MOD
SFNAUXRESBIND
RMV
SFNAUXRESBIND

ADD
SFNAUXRESBIND
MOD
BTS3900, BTS3900 SFNAUXRESBIND
SfnAuxResBind eNodeBId Main eNodeB ID
LTE RMV
SFNAUXRESBIND
LST
SFNAUXRESBIND
 ADD
SFNAUXRESBIND
MOD
Main eNodeB Local BTS3900, BTS3900 SFNAUXRESBIND
SfnAuxResBind LocalCellId
cell ID LTE RMV
SFNAUXRESBIND
LST
SFNAUXRESBIND

ADD
SFNAUXRESBIND
Baseband BTS3900, BTS3900 MOD
SfnAuxResBind BaseBandEqmId
equipment ID LTE SFNAUXRESBIND
LST
SFNAUXRESBIND
 ADD
SFNAUXRESBIND
ReferenceSignalPw Reference signal BTS3900, BTS3900 MOD
SfnAuxResBind
r power LTE SFNAUXRESBIND
LST
SFNAUXRESBIND

ADD
SFNAUXRESBIND
ReferenceSignalPw Reference Signal BTS3900, BTS3900 MOD
SfnAuxResBind
rMargin Power Margin LTE SFNAUXRESBIND
LST
SFNAUXRESBIND
 ADD
SFNAUXRESBIND
SectorCpriCompres Sector CPRI BTS3900, BTS3900 MOD
SfnAuxResBind
sion Compression LTE SFNAUXRESBIND
LST
SFNAUXRESBIND

ADD
SFNAUXRESBIND
BTS3900, BTS3900 MOD
SfnAuxResBind AutoCfgFlag Auto Config Flag
LTE SFNAUXRESBIND
LST
SFNAUXRESBIND
 ADD
SFNAUXRESGRPB
IND
ADD
SFNAUXSECTORE
QM2GRP
LST
SFNAUXRESGRPB
IND
LST
Sector equipment BTS3900, BTS3900
SfnAuxResGrpBind SectorEqmGroupId SFNAUXSECTORE
Group ID LTE
QM2GRP
MOD
SFNAUXRESGRPB
IND
RMV
SFNAUXRESGRPB
IND
RMV
SFNAUXSECTORE
QM2GRP

ADD
SFNAUXRESGRPB
IND
ADD
SFNAUXSECTORE
QM2GRP
LST
SFNAUXRESGRPB
IND
LST
BTS3900, BTS3900
SfnAuxResGrpBind eNodeBId Main eNodeB ID SFNAUXSECTORE
LTE
QM2GRP
MOD
SFNAUXRESGRPB
IND
RMV
SFNAUXRESGRPB
IND
RMV
SFNAUXSECTORE
QM2GRP
 ADD
SFNAUXRESGRPB
IND
ADD
SFNAUXSECTORE
QM2GRP
LST
SFNAUXRESGRPB
IND
LST
Main eNodeB Local BTS3900, BTS3900
SfnAuxResGrpBind LocalCellId SFNAUXSECTORE
cell ID LTE
QM2GRP
MOD
SFNAUXRESGRPB
IND
RMV
SFNAUXRESGRPB
IND
RMV
SFNAUXSECTORE
QM2GRP

ADD
SFNAUXRESGRPB
IND
MOD
Baseband BTS3900, BTS3900
SfnAuxResGrpBind BaseBandEqmId SFNAUXRESGRPB
equipment ID LTE
IND
LST
SFNAUXRESGRPB
IND
 ADD
SFNAUXRESGRPB
IND
MOD
ReferenceSignalPw Reference signal BTS3900, BTS3900
SfnAuxResGrpBind SFNAUXRESGRPB
r power LTE
IND
LST
SFNAUXRESGRPB
IND

ADD
SFNAUXSECTORE
QM2GRP
SFN Sector LST
BTS3900, BTS3900
SfnAuxResGrpBind SfnSectorEqmRef Equipment SFNAUXSECTORE
LTE
Reference QM2GRP
RMV
SFNAUXSECTORE
QM2GRP

ADD
SFNAUXSECTORE
QM2GRP
RMV
SfnSectorEqmRefT Sector equipment BTS3900, BTS3900
SfnAuxResGrpBind SFNAUXSECTORE
ype.SectorEqmId ID LTE
QM2GRP
LST
SFNAUXSECTORE
QM2GRP
 ADD
SFNAUXRESGRPB
IND
MOD
SectorGroupCpriCo Sector Group CPRI BTS3900, BTS3900
SfnAuxResGrpBind SFNAUXRESGRPB
mpression Compression LTE
IND
LST
SFNAUXRESGRPB
IND

ADD
SFNAUXRESGRPB
IND
MOD
BTS3900, BTS3900
SfnAuxResGrpBind AutoCfgFlag Auto Config Flag SFNAUXRESGRPB
LTE
IND
LST
SFNAUXRESGRPB
IND

ADD
SFNCELLBIND
BTS3900, BTS3900 LST
SfnCellBind LocalCellId Local cell ID
LTE SFNCELLBIND
RMV
SFNCELLBIND
ADD
SFNCELLBIND
Slave site eNodeB BTS3900, BTS3900 RMV
SfnCellBind eNodeBId
ID LTE SFNCELLBIND
LST
SFNCELLBIND
 LST
BTS3900, BTS3900 CELLBACKOFF
CellBackOff LocalCellId Local Cell ID
LTE MOD
CELLBACKOFF

MOD
Inter-Frequency
InterFreqBackoffPrb BTS3900, BTS3900 CELLBACKOFF
CellBackOff Backoff PRB
Thd LTE LST
Threshold
CELLBACKOFF
 MOD
Inter-Frequency
InterFreqBackoffUe BTS3900, BTS3900 CELLBACKOFF
CellBackOff Backoff UE Number
NumThd LTE LST
Threshold
CELLBACKOFF
 MOD
RB Priority MCS
RBPriMcsSelectTrig BTS3900, BTS3900 CELLBACKOFF
CellBackOff Selection Trigger
PrbThd LTE LST
PRB Threshold
CELLBACKOFF
 MOD
RB Priority MCS
RBPriMcsSelectSto BTS3900, BTS3900 CELLBACKOFF
CellBackOff Selection Stop PRB
pPrbThd LTE LST
Threshold
CELLBACKOFF
 MOD
Lowest Efficiency BTS3900, BTS3900 CELLBACKOFF
CellBackOff LowestEffDlMcsThd
DL MCS Threshold LTE LST
CELLBACKOFF

MOD
Low Efficiency DL BTS3900, BTS3900 CELLBACKOFF
CellBackOff LowEffDlMcsThd
MCS Threshold LTE LST
CELLBACKOFF
 MOD
Low Efficiency DL BTS3900, BTS3900 CELLBACKOFF
CellBackOff LowEffDlFactorA
Factor A LTE LST
CELLBACKOFF

MOD
Low Efficiency DL BTS3900, BTS3900 CELLBACKOFF
CellBackOff LowEffDlFactorK
Factor K LTE LST
CELLBACKOFF
 MOD
Lowest Efficiency BTS3900, BTS3900 CELLBACKOFF
CellBackOff LowestEffUlMcsThd
UL MCS Threshold LTE LST
CELLBACKOFF

MOD
Low Efficiency UL BTS3900, BTS3900 CELLBACKOFF
CellBackOff LowEffUlMcsThd
MCS Threshold LTE LST
CELLBACKOFF
 MOD
Low Efficiency UL BTS3900, BTS3900 CELLBACKOFF
CellBackOff LowEffUlFactorA
Factor A LTE LST
CELLBACKOFF

MOD
Low Efficiency UL BTS3900, BTS3900 CELLBACKOFF
CellBackOff LowEffUlFactorK
Factor K LTE LST
CELLBACKOFF
 MOD
UL Heavy Traffic
UlHeavyTrafficTtiPr BTS3900, BTS3900 CELLBACKOFF
CellBackOff TTI Proportion
oporThd LTE LST
Threshold
CELLBACKOFF

MOD
UlTrafficMlbUeNum UL Traffic MLB UE BTS3900, BTS3900 CELLBACKOFF
CellBackOff
Thd Number Threshold LTE LST
CELLBACKOFF
 MOD
UlHeavyTrafficJudg UL Heavy Traffic BTS3900, BTS3900 CELLBACKOFF
CellBackOff
ePeriod Judge Period LTE LST
CELLBACKOFF

BTS3900, BTS3900 LST CELLBF

CellBf LocalCellId Local cell ID
LTE MOD CELLBF

Beamforming
BTS3900, BTS3900 MOD CELLBF
CellBf MaxBfRankPara maximum number
LTE LST CELLBF
of layers

BTS3900, BTS3900
CellBf eNodeBId eNodeB ID None
LTE

RF Module BTS3900, BTS3900

CellBf RfModuleInfo None
Information LTE

BTS3900, BTS3900
CellBf RxNo RX Channel No. None
LTE
 BTS3900, BTS3900
CellBf TxNo TX Channel No. None
LTE

DSP
BTS3900, BTS3900
CellBf RxChCINR Rx Channel CINR CELLCALIBRATIO
LTE
N

DSP
BTS3900, BTS3900
CellBf TxChCINR Tx Channel CINR CELLCALIBRATIO
LTE
N

Dual Layer
DualLayerBFAlgTyp BTS3900, BTS3900 MOD CELLBF
CellBf Beamforming
e LTE LST CELLBF
Algorithm Type

HighOrderMubfMax high-order MUBF BTS3900, BTS3900 MOD CELLBF

CellBf
Layer Max Layer LTE LST CELLBF
 HighOrderMubfPair high-order MUBF BTS3900, BTS3900 MOD CELLBF
CellBf
Rule Pair Rule LTE LST CELLBF

LST
BTS3900, BTS3900 CELLCQIADJALGO
CellCqiAdjAlgo LocalCellId Local cell ID
LTE MOD
CELLCQIADJALGO
 MOD
Initial Downlink BTS3900, BTS3900 CELLCQIADJALGO
CellCqiAdjAlgo InitDlIblerTarget
IBLER Target LTE LST
CELLCQIADJALGO

MOD
BTS3900, BTS3900 CELLCQIADJALGO
CellCqiAdjAlgo InitDeltaCqi Initial Delta Cqi
LTE LST
CELLCQIADJALGO
 MOD
BTS3900, BTS3900 CELLCQIADJALGO
CellCqiAdjAlgo CqiAdjStep CQI Adjust Step
LTE LST
CELLCQIADJALGO

MOD
CqiFilterCoefForMc CQI Filter BTS3900, BTS3900 CELLCQIADJALGO
CellCqiAdjAlgo
s Coefficient for MCS LTE LST
CELLCQIADJALGO

DSP
CELLCSIRSPARAC
FG
LST
BTS3900, BTS3900
CellCsiRsParaCfg LocalCellId Local cell ID CELLCSIRSPARAC
LTE
FG
MOD
CELLCSIRSPARAC
FG
 MOD
CELLCSIRSPARAC
BTS3900, BTS3900 FG
CellCsiRsParaCfg CsiRsSwitch CSI-RS Switch
LTE LST
CELLCSIRSPARAC
FG

MOD
CELLCSIRSPARAC
BTS3900, BTS3900 FG
CellCsiRsParaCfg CsiRsPeriod CSI-RS Period
LTE LST
CELLCSIRSPARAC
FG

DSP
BTS3900, BTS3900
CellCsiRsParaCfg CsiRsState CsiRs State CELLCSIRSPARAC
LTE
FG
 MOD
CELLCSIRSPARAC
CsiRsConfigUserNu CSI-RS Config User BTS3900, BTS3900 FG
CellCsiRsParaCfg
mTh Number Threshold LTE LST
CELLCSIRSPARAC
FG
 MOD
CELLCSIRSPARAC
CSI-RS Unconfig
CsiRsUnconfigUser BTS3900, BTS3900 FG
CellCsiRsParaCfg User Number
NumTh LTE LST
Threshold
CELLCSIRSPARAC
FG
 MOD
CELLCSIRSPARAC
CsiRsConfigUserRa CSI-RS Config User BTS3900, BTS3900 FG
CellCsiRsParaCfg
tioTh Ratio Threshold LTE LST
CELLCSIRSPARAC
FG
 MOD
CELLCSIRSPARAC
CSI-RS Unconfig
CsiRsUnconfigUser BTS3900, BTS3900 FG
CellCsiRsParaCfg User Ratio
RatioTh LTE LST
Threshold
CELLCSIRSPARAC
FG

DSP
CELLCSPCSTATU
S
DSP
BTS3900, BTS3900 CELLDLCOMPSTA
CellCspcPara LocalCellId Local cell ID
LTE TUS
LST
CELLCSPCPARA
MOD
CELLCSPCPARA

MOD
BTS3900, BTS3900 CELLCSPCPARA
CellCspcPara CellCspcSwitch Cell CSPC Switch
LTE LST
CELLCSPCPARA
 MOD
CSPC UE SRS
CspcRapidRptSwitc BTS3900, BTS3900 CELLCSPCPARA
CellCspcPara Config Rapid
h LTE LST
Report Switch
CELLCSPCPARA

MOD
CSPC UE SRS
CspcUeSrsCfgRptP BTS3900, BTS3900 CELLCSPCPARA
CellCspcPara Config Report
eriod LTE LST
Period
CELLCSPCPARA
 MOD
Uplink RSRP
BTS3900, BTS3900 CELLCSPCPARA
CellCspcPara UlRsrpRptPeriod Measurement
LTE LST
Report Period
CELLCSPCPARA

MOD
CSPC CQI Filter BTS3900, BTS3900 CELLCSPCPARA
CellCspcPara CspcCqiFilterCoeff
Coefficient LTE LST
CELLCSPCPARA

MOD
UlRsrpPhyFilterCoe Uplink RSRP PHY BTS3900, BTS3900 CELLCSPCPARA
CellCspcPara
ff Filter Coefficient LTE LST
CELLCSPCPARA

MOD
UlRsrpRrmFilterCo Uplink RSRP RRM BTS3900, BTS3900 CELLCSPCPARA
CellCspcPara
eff Filter Coefficient LTE LST
CELLCSPCPARA
 DSP
BTS3900, BTS3900
CellCspcPara CellCspcStatus Cell CSPC Status CELLCSPCSTATU
LTE
S

DSP
BTS3900, BTS3900
CellCspcPara Remarks Remarks CELLCSPCSTATU
LTE
S

DSP
BTS3900, BTS3900
CellCspcPara MacroOrMicroCell Macro Or Micro Cell CELLCSPCSTATU
LTE
S
 DSP
BTS3900, BTS3900
CellCspcPara CellDlCompStatus Cell DlCoMP Status CELLDLCOMPSTA
LTE
TUS

BTS3900, BTS3900 LST CELLDSS

CellDss LocalCellId Local cell ID
LTE MOD CELLDSS
 HighFreqShareRbN Shared RB Number BTS3900, BTS3900 MOD CELLDSS
CellDss
um in High Frequency LTE LST CELLDSS
 LowFreqShareRbN Shared RB Number BTS3900, BTS3900 MOD CELLDSS
CellDss
um in Low Frequency LTE LST CELLDSS
 BTS3900, BTS3900 MOD CELLDSS
CellDss ReMuteSwitch Mute RE Switch
LTE LST CELLDSS
 UL Narrowband
UlInterfRestrictionM BTS3900, BTS3900 MOD CELLDSS
CellDss Interference
ode LTE LST CELLDSS
Restriction Mode
 BTS3900, BTS3900 MOD CELLDSS
CellDss A3Offset A3 Offset
LTE LST CELLDSS
 BTS3900, BTS3900 MOD CELLDSS
CellDss A6Offset A6 Offset
LTE LST CELLDSS
 Near Area Sinr BTS3900, BTS3900 MOD CELLDSS
CellDss NearAreaSinrThd
Threshold LTE LST CELLDSS
 Middle Area Sinr BTS3900, BTS3900 MOD CELLDSS
CellDss MiddleAreaSinrThd
Threshold LTE LST CELLDSS
 Far Area Sinr BTS3900, BTS3900 MOD CELLDSS
CellDss FarAreaSinrThd
Threshold LTE LST CELLDSS

Interference
InterfNCellConfigM BTS3900, BTS3900 MOD CELLDSS
CellDss Neighbour Cell
ode LTE LST CELLDSS
Configuration Mode
 LST
CELLDYNACBARA
CellDynAcBarAlgoP BTS3900, BTS3900 LGOPARA
LocalCellId Local Cell ID
ara LTE MOD
CELLDYNACBARA
LGOPARA

MOD
CELLDYNACBARA
Dynamic AC
CellDynAcBarAlgoP DynAcBarStatPerio BTS3900, BTS3900 LGOPARA
Barring Control
ara d LTE LST
Statistic Period
CELLDYNACBARA
LGOPARA

MOD
CELLDYNACBARA
Dynamic AC
CellDynAcBarAlgoP DynAcBarTriggerTh BTS3900, BTS3900 LGOPARA
Barring Control
ara d LTE LST
Trigger Threshold
CELLDYNACBARA
LGOPARA
 MOD
CELLDYNACBARA
Dynamic AC
CellDynAcBarAlgoP DynAcBarCancelTh BTS3900, BTS3900 LGOPARA
Barring Control
ara d LTE LST
Cancel Threshold
CELLDYNACBARA
LGOPARA

MOD
CELLDYNACBARA
Ssac Trigger
CellDynAcBarAlgoP SsacTriggerCondS BTS3900, BTS3900 LGOPARA
Condition Satisfied
ara atiPeriods LTE LST
Periods
CELLDYNACBARA
LGOPARA
 MOD
CELLDYNACBARA
Ssac Cancel
CellDynAcBarAlgoP SsacCancelCondS BTS3900, BTS3900 LGOPARA
Condition Satisfied
ara atiPeriods LTE LST
Periods
CELLDYNACBARA
LGOPARA
 MOD
CELLDYNACBARA
CellDynAcBarAlgoP DisasterReferenceI Disaster Reference BTS3900, BTS3900 LGOPARA
ara nd Indication LTE LST
CELLDYNACBARA
LGOPARA

MOD
CELLDYNACBARA
CellDynAcBarAlgoP BTS3900, BTS3900 LGOPARA
DisasterDuration Disaster Duration
ara LTE LST
CELLDYNACBARA
LGOPARA
 MOD
CELLDYNACBARA
MO Trigger
CellDynAcBarAlgoP MoTriggerCondSati BTS3900, BTS3900 LGOPARA
Condition Satisfied
ara Periods LTE LST
Periods
CELLDYNACBARA
LGOPARA

MOD
CELLDYNACBARA
MO Cancel
CellDynAcBarAlgoP MoCancelCondSati BTS3900, BTS3900 LGOPARA
Condition Satisfied
ara Periods LTE LST
Periods
CELLDYNACBARA
LGOPARA

BTS3900, BTS3900 LST CELLEICIC

CellEicic LocalCellId Local cell ID
LTE MOD CELLEICIC
 BTS3900, BTS3900 MOD CELLEICIC
CellEicic AbsPattern Abs pattern
LTE LST CELLEICIC
 EicicMeasureEnabl Eicic Measure BTS3900, BTS3900 MOD CELLEICIC
CellEicic
e Enable LTE LST CELLEICIC
 BTS3900, BTS3900 MOD CELLEICIC
CellEicic A3Offset eICIC A3 Offset
LTE LST CELLEICIC

Abs Adjustment BTS3900, BTS3900 MOD CELLEICIC

CellEicic AbsAdjPeriod
Period LTE LST CELLEICIC
 Sample Number BTS3900, BTS3900 MOD CELLEICIC
CellEicic SampleNumTarget
Target LTE LST CELLEICIC

Attach Cell Add BTS3900, BTS3900 MOD CELLEICIC

CellEicic AttachCellAddThd
Threshold LTE LST CELLEICIC
 BTS3900, BTS3900 MOD CELLEICIC
CellEicic WorkMode Work Mode
LTE LST CELLEICIC

BTS3900, BTS3900 MOD CELLEICIC

CellEicic StatPeriod Statistical Period
LTE LST CELLEICIC
 ADD
CELLFRAMEOFFS
ET
LST
CELLFRAMEOFFS
BTS3900, BTS3900 ET
CellFrameOffset LocalCellId Local Cell ID
LTE MOD
CELLFRAMEOFFS
ET
RMV
CELLFRAMEOFFS
ET

ADD
CELLFRAMEOFFS
ET
MOD
BTS3900, BTS3900
CellFrameOffset FrameOffsetMode Frame Offset Mode CELLFRAMEOFFS
LTE
ET
LST
CELLFRAMEOFFS
ET
 ADD
CELLFRAMEOFFS
ET
MOD
BTS3900, BTS3900
CellFrameOffset FrameOffset Frame Offset CELLFRAMEOFFS
LTE
ET
LST
CELLFRAMEOFFS
ET

LST
BTS3900, BTS3900 CELLIICSPARA
CellIIcsPara LocalCellId Local cell ID
LTE MOD
CELLIICSPARA

MOD
IicsUserAttrA3Offse IICS User Attribute BTS3900, BTS3900 CELLIICSPARA
CellIIcsPara
t A3 offset LTE LST
CELLIICSPARA
 MOD
IICS User Attribute BTS3900, BTS3900 CELLIICSPARA
CellIIcsPara IicsUserAttrThd
threshold LTE LST
CELLIICSPARA

LST
BTS3900, BTS3900 CELLLOWPOWER
CellLowPower LocalCellId Local cell ID
LTE MOD
CELLLOWPOWER

MOD
Low power
BTS3900, BTS3900 CELLLOWPOWER
CellLowPower LowPwrSwitch consumption mode
LTE LST
switch
CELLLOWPOWER
 MOD
Low power
BTS3900, BTS3900 CELLLOWPOWER
CellLowPower LowPwrOrder consumption mode
LTE LST
order
CELLLOWPOWER

MOD
BTS3900, BTS3900 CELLLOWPOWER
CellLowPower StartTime Start time
LTE LST
CELLLOWPOWER

MOD
BTS3900, BTS3900 CELLLOWPOWER
CellLowPower StopTime Stop time
LTE LST
CELLLOWPOWER
 MOD
CellUsedPwrReduc Cell used power BTS3900, BTS3900 CELLLOWPOWER
CellLowPower
eTimeLen reduce time length LTE LST
CELLLOWPOWER

MOD
Reference signal
RsPwrReduceTime BTS3900, BTS3900 CELLLOWPOWER
CellLowPower power reduce time
Len LTE LST
length
CELLLOWPOWER

MOD
RfShutDownTimeLe RF shutdown time BTS3900, BTS3900 CELLLOWPOWER
CellLowPower
n length LTE LST
CELLLOWPOWER
 MOD
Cell used power BTS3900, BTS3900 CELLLOWPOWER
CellLowPower CellUsedPwrRatio
ratio LTE LST
CELLLOWPOWER

MOD
Reference signal BTS3900, BTS3900 CELLLOWPOWER
CellLowPower RsPwrAdjOffset
power adjust offset LTE LST
CELLLOWPOWER
 Time length for MOD
entering the low BTS3900, BTS3900 CELLLOWPOWER
CellLowPower EnterTimeLen
power consumption LTE LST
mode CELLLOWPOWER
 MOD
Back power save BTS3900, BTS3900 CELLLOWPOWER
CellLowPower BakPwrSavPolicy
policy LTE LST
CELLLOWPOWER

ADD
SERVICEAREAID2
LIST
DSP
CELLMBMSCFG
DSP
DYNAMICSERVIC
EAREA
BTS3900, BTS3900 LST
CellMBMSCfg LocalCellId Local cell ID
LTE CELLMBMSCFG
LST
SERVICEAREAID2
LIST
MOD
CELLMBMSCFG
RMV
SERVICEAREAID2
LIST

BTS3900, BTS3900 DSP

CellMBMSCfg MBSFNAreaId MBSFN Area ID
LTE CELLMBMSCFG
 MOD
MBSFN
BTS3900, BTS3900 CELLMBMSCFG
CellMBMSCfg MBSFNSyncAreaId synchronization
LTE LST
Area ID
CELLMBMSCFG

MBMSSessionTMG MBMS Session BTS3900, BTS3900 DSP

CellMBMSCfg
I TMGI LTE CELLMBMSCFG

MOD
BTS3900, BTS3900 CELLMBMSCFG
CellMBMSCfg MBMSSwitch MBMS switch
LTE LST
CELLMBMSCFG

ADD
SERVICEAREAID2
LIST
LST
BTS3900, BTS3900
CellMBMSCfg ServiceAreaIdList Service Area ID List SERVICEAREAID2
LTE
LIST
RMV
SERVICEAREAID2
LIST

ADD
SERVICEAREAID2
LIST
LST
ServiceAreaIdRef.S BTS3900, BTS3900
CellMBMSCfg Service Area ID SERVICEAREAID2
erviceAreaId LTE
LIST
RMV
SERVICEAREAID2
LIST
 MOD
MBMSServiceSwitc MBMS Service BTS3900, BTS3900 CELLMBMSCFG
CellMBMSCfg
h Switch LTE LST
CELLMBMSCFG
 MOD
Neighbor Cell
NCellMbmsCfgSwit BTS3900, BTS3900 CELLMBMSCFG
CellMBMSCfg MBMS Config
ch LTE LST
Switch
CELLMBMSCFG

DSP
DynamicServiceAre Dynamic Service BTS3900, BTS3900
CellMBMSCfg DYNAMICSERVIC
aIdList Area ID List LTE
EAREA

LST
BTS3900, BTS3900 CELLMLBUESEL
CellMlbUeSel LocalCellId Local Cell ID
LTE MOD
CELLMLBUESEL
 MOD
UE Select PRB BTS3900, BTS3900 CELLMLBUESEL
CellMlbUeSel UeSelectPrbPrio
Priority LTE LST
CELLMLBUESEL
 MOD
UE Select QCI BTS3900, BTS3900 CELLMLBUESEL
CellMlbUeSel UeSelectQciPrio
Priority LTE LST
CELLMLBUESEL
 MOD
UE Select ARP BTS3900, BTS3900 CELLMLBUESEL
CellMlbUeSel UeSelectArpPrio
Priority LTE LST
CELLMLBUESEL
 MOD
UE Select DL MCS BTS3900, BTS3900 CELLMLBUESEL
CellMlbUeSel UeSelectDlMcsPrio
Priority LTE LST
CELLMLBUESEL

MOD
Inter-Freq MLB UE
InterFreqMlbUeArp BTS3900, BTS3900 CELLMLBUESEL
CellMlbUeSel Select ARP
Thd LTE LST
Threshold
CELLMLBUESEL
 MOD
Inter-Freq MLB UE
InterFreqMlbUeDlM BTS3900, BTS3900 CELLMLBUESEL
CellMlbUeSel Select DL MCS
csThd LTE LST
Threshold
CELLMLBUESEL

BTS3900, BTS3900 LST CELLMRO

CellMro LocalCellId Local cell ID
LTE MOD CELLMRO
 CIO adjustment
BTS3900, BTS3900 MOD CELLMRO
CellMro CioAdjLimitCfgInd range configuration
LTE LST CELLMRO
indicator
 CIO adjustment BTS3900, BTS3900 MOD CELLMRO
CellMro CioAdjUpperLimit
upper limit LTE LST CELLMRO

CIO adjustment BTS3900, BTS3900 MOD CELLMRO

CellMro CioAdjLowerLimit
lower limit LTE LST CELLMRO
 InterFreqA2RsrpUp Interfreq A2 RSRP BTS3900, BTS3900 MOD CELLMRO
CellMro
Limit Upper Limit LTE LST CELLMRO

InterFreqA2RsrpLo Interfreq A2 RSRP BTS3900, BTS3900 MOD CELLMRO

CellMro
wLimit Lower Limit LTE LST CELLMRO

A3 based Interfreq
A3InterFreqA2Rsrp BTS3900, BTS3900 MOD CELLMRO
CellMro A2 RSRP Upper
UpLimit LTE LST CELLMRO
Limit

A3 based Interfreq
A3InterFreqA2Rsrp BTS3900, BTS3900 MOD CELLMRO
CellMro A2 RSRP Lower
LowLimit LTE LST CELLMRO
Limit
 Interfreq MRO
InterFreqMroAdjPar BTS3900, BTS3900 MOD CELLMRO
CellMro Adjust Parameters
aSel LTE LST CELLMRO
Selection

LST CELLPCALGO
BTS3900, BTS3900
CellPcAlgo LocalCellId Local Cell ID MOD
LTE
CELLPCALGO
 MOD
Srs Power Control BTS3900, BTS3900
CellPcAlgo SrsPcStrategy CELLPCALGO
Strategy LTE
LST CELLPCALGO
 MOD
PucchCloseLoopPc PUCCH Close Loop BTS3900, BTS3900
CellPcAlgo CELLPCALGO
Type Power Control Type LTE
LST CELLPCALGO

MOD
Pucch Power BTS3900, BTS3900
CellPcAlgo PucchPcPeriod CELLPCALGO
Control Period LTE
LST CELLPCALGO
 Pucch Power MOD
PucchPcTargetSinr BTS3900, BTS3900
CellPcAlgo Control Target Sinr CELLPCALGO
Offset LTE
Offset LST CELLPCALGO

MOD
PUSCH RSRP High BTS3900, BTS3900
CellPcAlgo PuschRsrpHighThd CELLPCALGO
Threshold LTE
LST CELLPCALGO
 MOD
PuschIoTCtrlA3Offs Pusch IoT Control BTS3900, BTS3900
CellPcAlgo CELLPCALGO
et A3Offset LTE
LST CELLPCALGO
 MOD
IoTNearPointOptSw IoT NearPoint BTS3900, BTS3900
CellPcAlgo CELLPCALGO
itch Optimization Switch LTE
LST CELLPCALGO
 MOD
IoTNearPointPLThr IoT NearPoint BTS3900, BTS3900
CellPcAlgo CELLPCALGO
eshold PathLoss Threshold LTE
LST CELLPCALGO
 MOD
SRS Power Control BTS3900, BTS3900
CellPcAlgo SrsPcSinrTarget CELLPCALGO
SINR Target LTE
LST CELLPCALGO
 MOD
SRS Power Control BTS3900, BTS3900
CellPcAlgo SrsPcRsrpTarget CELLPCALGO
RSRP Target LTE
LST CELLPCALGO
 MOD
PUSCHPsdCtrlTarg PUSCH PSD BTS3900, BTS3900
CellPcAlgo CELLPCALGO
et Control Target LTE
LST CELLPCALGO
 Close Loop MOD
CloseLoopOptPUS BTS3900, BTS3900
CellPcAlgo Optimization CELLPCALGO
CHType LTE
PUSCH Type LST CELLPCALGO
 PUSCH MOD
PUSCHOptIBLERT BTS3900, BTS3900
CellPcAlgo Optimization IBLER CELLPCALGO
hreshold LTE
Threshold LST CELLPCALGO
 PUSCH PSD MOD
PUSCHPsdCtrlTarg BTS3900, BTS3900
CellPcAlgo Control Target for CELLPCALGO
etForUs LTE
Unlimited Service LST CELLPCALGO
 MOD
IoTCtrlINCorrectSwi IoT Control IN BTS3900, BTS3900
CellPcAlgo CELLPCALGO
tch Correct Switch LTE
LST CELLPCALGO

IoT Control Edge MOD

IoTCtrlEUPLThresh BTS3900, BTS3900
CellPcAlgo UE Pathloss CELLPCALGO
old LTE
Threshold LST CELLPCALGO
 MOD
IoT Control NI BTS3900, BTS3900
CellPcAlgo IoTCtrlNIThreshold CELLPCALGO
Threshold LTE
LST CELLPCALGO
 MOD
NearPointUePusch Near Point PUSCH BTS3900, BTS3900
CellPcAlgo CELLPCALGO
Type User Type LTE
LST CELLPCALGO
 MOD
VoLteSinrHighThdO VoLTE SINR High BTS3900, BTS3900
CellPcAlgo CELLPCALGO
ffset Threshold Offset LTE
LST CELLPCALGO

LST
BTS3900, BTS3900 CELLPRBVALMLB
CellPrbValMlb LocalCellId Loacal Cell ID
LTE MOD
CELLPRBVALMLB
 MOD
PRB Valuation MLB BTS3900, BTS3900 CELLPRBVALMLB
CellPrbValMlb PrbValMlbTrigThd
Trigger Threshold LTE LST
CELLPRBVALMLB
 MOD
PRB Valuation MLB BTS3900, BTS3900 CELLPRBVALMLB
CellPrbValMlb PrbValMlbAdmitThd
Admit Threshold LTE LST
CELLPRBVALMLB

MOD
Mlb UE Selection
MlbUeSelectPrbVal BTS3900, BTS3900 CELLPRBVALMLB
CellPrbValMlb PRB Valuation
Thd LTE LST
Threshold
CELLPRBVALMLB
 MOD
PRB Valuation Filter BTS3900, BTS3900 CELLPRBVALMLB
CellPrbValMlb PrbValFilterFactor
Factor LTE LST
CELLPRBVALMLB

DSP
ROOTSEQCONFLI
CT
BTS3900, BTS3900
CellRachAlgo LocalCellId Local cell ID LST
LTE
CELLRACHALGO
MOD
CELLRACHALGO
 MOD
PRACH False
PrachFalseAlarmDe BTS3900, BTS3900 CELLRACHALGO
CellRachAlgo Alarm Detect
tRadThd LTE LST
Radius Threshold
CELLRACHALGO
 MOD
RachThdBoostRati RACH Threshold BTS3900, BTS3900 CELLRACHALGO
CellRachAlgo
o Boosting Ratio LTE LST
CELLRACHALGO

DSP
Conflict Cell Mobile BTS3900, BTS3900
CellRachAlgo ConflictCellMnc ROOTSEQCONFLI
Network Code LTE
CT
 DSP
BTS3900, BTS3900
CellRachAlgo ConflicteNodeBId Conflict eNodeB ID ROOTSEQCONFLI
LTE
CT

DSP
BTS3900, BTS3900
CellRachAlgo ConflictCellId Conflict Cell ID ROOTSEQCONFLI
LTE
CT

DSP
Conflict Cell Mobile BTS3900, BTS3900
CellRachAlgo ConflictCellMcc ROOTSEQCONFLI
Country Code LTE
CT
 MOD
Prach Interference BTS3900, BTS3900 CELLRACHALGO
CellRachAlgo PrachInterfPeriod
Period LTE LST
CELLRACHALGO

MOD
PrachInterfThreshol Prach Interference BTS3900, BTS3900 CELLRACHALGO
CellRachAlgo
d Threshold LTE LST
CELLRACHALGO
 MOD
PrachInterfHysteres Prach Interference BTS3900, BTS3900 CELLRACHALGO
CellRachAlgo
is Hysteresis LTE LST
CELLRACHALGO

LST CELLRACTHD
BTS3900, BTS3900
CellRacThd LocalCellId Local cell ID MOD
LTE
CELLRACTHD

MOD
Gold service arp BTS3900, BTS3900
CellRacThd GoldServiceArpThd CELLRACTHD
threshold LTE
LST CELLRACTHD
 MOD
SilverServiceArpTh Silver service arp BTS3900, BTS3900
CellRacThd CELLRACTHD
d threshold LTE
LST CELLRACTHD

MOD
QCI1 handover BTS3900, BTS3900
CellRacThd Qci1HoThd CELLRACTHD
admission threshold LTE
LST CELLRACTHD
 MOD
QCI2 handover BTS3900, BTS3900
CellRacThd Qci2HoThd CELLRACTHD
admission threshold LTE
LST CELLRACTHD

MOD
QCI3 handover BTS3900, BTS3900
CellRacThd Qci3HoThd CELLRACTHD
admission threshold LTE
LST CELLRACTHD
 MOD
QCI4 handover BTS3900, BTS3900
CellRacThd Qci4HoThd CELLRACTHD
admission threshold LTE
LST CELLRACTHD

Gold new service MOD

NewGoldServiceOff BTS3900, BTS3900
CellRacThd admission threshold CELLRACTHD
set LTE
offset LST CELLRACTHD
 Silver new service MOD
NewSilverServiceOf BTS3900, BTS3900
CellRacThd admission threshold CELLRACTHD
fset LTE
offset LST CELLRACTHD
 Bronze new service MOD
NewCopperService BTS3900, BTS3900
CellRacThd admission threshold CELLRACTHD
Offset LTE
offset LST CELLRACTHD
 MOD
QCI1 congest BTS3900, BTS3900
CellRacThd Qci1CongThd CELLRACTHD
threshold LTE
LST CELLRACTHD
 MOD
QCI2 congest BTS3900, BTS3900
CellRacThd Qci2CongThd CELLRACTHD
threshold LTE
LST CELLRACTHD
 MOD
QCI3 congest BTS3900, BTS3900
CellRacThd Qci3CongThd CELLRACTHD
threshold LTE
LST CELLRACTHD
 MOD
QCI4 congest BTS3900, BTS3900
CellRacThd Qci4CongThd CELLRACTHD
threshold LTE
LST CELLRACTHD
 MOD
Offset for service BTS3900, BTS3900
CellRacThd CongRelOffset CELLRACTHD
congest relieving LTE
LST CELLRACTHD
 MOD
Uplink RB used BTS3900, BTS3900
CellRacThd UlRbHighThd CELLRACTHD
ratio high threshold LTE
LST CELLRACTHD
 MOD
Uplink RB used BTS3900, BTS3900
CellRacThd UlRbLowThd CELLRACTHD
ratio low threshold LTE
LST CELLRACTHD

Admission Control MOD

AcReservedUserNu BTS3900, BTS3900
CellRacThd Reserved User CELLRACTHD
mber LTE
Number LST CELLRACTHD
 MOD
VolteReservedNum VoLTE Reserved BTS3900, BTS3900
CellRacThd CELLRACTHD
ber Number LTE
LST CELLRACTHD

MOD
VoltePrefAdmission VoLTE Preferential BTS3900, BTS3900
CellRacThd CELLRACTHD
Timer Admission Timer LTE
LST CELLRACTHD

DSP
CELLRFSHUTDO
WN
LST
BTS3900, BTS3900
CellRfShutdown LocalCellId Local cell ID CELLRFSHUTDO
LTE
WN
MOD
CELLRFSHUTDO
WN
 MOD
CELLRFSHUTDO
RF intelligent BTS3900, BTS3900 WN
CellRfShutdown RfShutdownSwitch
shutdown switch LTE LST
CELLRFSHUTDO
WN

MOD
CELLRFSHUTDO
BTS3900, BTS3900 WN
CellRfShutdown StartTime Start time
LTE LST
CELLRFSHUTDO
WN

MOD
CELLRFSHUTDO
BTS3900, BTS3900 WN
CellRfShutdown StopTime Stop time
LTE LST
CELLRFSHUTDO
WN

MOD
CELLRFSHUTDO
Reference signal BTS3900, BTS3900 WN
CellRfShutdown RsPwrAdjOffset
power adjust offset LTE LST
CELLRFSHUTDO
WN
 MOD
CELLRFSHUTDO
Downlink PRB BTS3900, BTS3900 WN
CellRfShutdown DlPrbThd
threshold LTE LST
CELLRFSHUTDO
WN
 MOD
CELLRFSHUTDO
Uplink PRB BTS3900, BTS3900 WN
CellRfShutdown UlPrbThd
threshold LTE LST
CELLRFSHUTDO
WN
 MOD
CELLRFSHUTDO
Downlink PRB BTS3900, BTS3900 WN
CellRfShutdown DlPrbOffset
offset LTE LST
CELLRFSHUTDO
WN
 MOD
CELLRFSHUTDO
BTS3900, BTS3900 WN
CellRfShutdown UlPrbOffset Uplink PRB offset
LTE LST
CELLRFSHUTDO
WN
 MOD
CELLRFSHUTDO
UE Number BTS3900, BTS3900 WN
CellRfShutdown UENumThd
Threshold LTE LST
CELLRFSHUTDO
WN
 Current status DSP
BTS3900, BTS3900
CellRfShutdown CurrentStatus about RF intelligent CELLRFSHUTDO
LTE
shutdown WN
 Latest exiting cause DSP
BTS3900, BTS3900
CellRfShutdown LatestExitingCause about RF intelligent CELLRFSHUTDO
LTE
shutdown WN

GET
CELLRICDATA
LST
BTS3900, BTS3900 CELLRICALGO
CellRicAlgo LocalCellId Local cell ID
LTE MOD
CELLRICALGO
SND
CELLRICPCISEQ
 MOD
RIC algorithm BTS3900, BTS3900 CELLRICALGO
CellRicAlgo RicAlgoSwitch
switch LTE LST
CELLRICALGO

MOD
MuteUpPTSSymNu Mute UpPTS BTS3900, BTS3900 CELLRICALGO
CellRicAlgo
m Symbol Number LTE LST
CELLRICALGO
 MOD
Whether to mute UL BTS3900, BTS3900 CELLRICALGO
CellRicAlgo MuteULSym
symbol LTE LST
CELLRICALGO

LST
CELLSERVICEDIF
BTS3900, BTS3900 FCFG
CellServiceDiffCfg LocalCellId Local cell ID
LTE MOD
CELLSERVICEDIF
FCFG
 MOD
CELLSERVICEDIF
Service
BTS3900, BTS3900 FCFG
CellServiceDiffCfg ServiceDiffSwitch differentiation
LTE LST
switch
CELLSERVICEDIF
FCFG
 MOD
CELLSERVICEDIF
Cell Congestion
CellConStatePrbTh BTS3900, BTS3900 FCFG
CellServiceDiffCfg State PRB
d LTE LST
Threshold
CELLSERVICEDIF
FCFG
 MOD
CELLSERVICEDIF
CellOverloadStateP Cell Overload State BTS3900, BTS3900 FCFG
CellServiceDiffCfg
rbThd PRB Threshold LTE LST
CELLSERVICEDIF
FCFG
 MOD
CELLSERVICEDIF
Cell Congestion
CellConStateUeNu BTS3900, BTS3900 FCFG
CellServiceDiffCfg State UE Number
mThd LTE LST
Threshold
CELLSERVICEDIF
FCFG
 MOD
CELLSERVICEDIF
Cell Overload State
CellOverloadStateU BTS3900, BTS3900 FCFG
CellServiceDiffCfg UE Number
eNumThd LTE LST
Threshold
CELLSERVICEDIF
FCFG
 MOD
CELLSERVICEDIF
QueueServiceWeig BTS3900, BTS3900 FCFG
CellServiceDiffCfg Weight of queue 0
ht0 LTE LST
CELLSERVICEDIF
FCFG
 MOD
CELLSERVICEDIF
QueueServiceWeig BTS3900, BTS3900 FCFG
CellServiceDiffCfg Weight of queue 1
ht1 LTE LST
CELLSERVICEDIF
FCFG
 MOD
CELLSERVICEDIF
QueueServiceWeig BTS3900, BTS3900 FCFG
CellServiceDiffCfg Weight of queue 2
ht2 LTE LST
CELLSERVICEDIF
FCFG

MOD
CELLSERVICEDIF
QueueServiceWeig BTS3900, BTS3900 FCFG
CellServiceDiffCfg Weight of queue 3
ht3 LTE LST
CELLSERVICEDIF
FCFG
 MOD
CELLSERVICEDIF
QueueServiceWeig BTS3900, BTS3900 FCFG
CellServiceDiffCfg Weight of queue 4
ht4 LTE LST
CELLSERVICEDIF
FCFG

MOD
CELLSERVICEDIF
QueueServiceWeig BTS3900, BTS3900 FCFG
CellServiceDiffCfg Weight of queue 5
ht5 LTE LST
CELLSERVICEDIF
FCFG
 MOD
CELLSERVICEDIF
QueueServiceWeig BTS3900, BTS3900 FCFG
CellServiceDiffCfg Weight of queue 6
ht6 LTE LST
CELLSERVICEDIF
FCFG

LST
BTS3900, BTS3900 CELLSHUTDOWN
CellShutdown LocalCellId Local cell ID
LTE MOD
CELLSHUTDOWN

MOD
CellShutdownSwitc Intelligent power-off BTS3900, BTS3900 CELLSHUTDOWN
CellShutdown
h of carriers switch LTE LST
CELLSHUTDOWN
 MOD
BTS3900, BTS3900 CELLSHUTDOWN
CellShutdown StartTime Start time
LTE LST
CELLSHUTDOWN

MOD
BTS3900, BTS3900 CELLSHUTDOWN
CellShutdown StopTime Stop time
LTE LST
CELLSHUTDOWN

MOD
Downlink PRB BTS3900, BTS3900 CELLSHUTDOWN
CellShutdown DlPrbThd
threshold LTE LST
CELLSHUTDOWN

MOD
Downlink PRB BTS3900, BTS3900 CELLSHUTDOWN
CellShutdown DlPrbOffset
offset LTE LST
CELLSHUTDOWN

MOD
Uplink PRB BTS3900, BTS3900 CELLSHUTDOWN
CellShutdown UlPrbThd
threshold LTE LST
CELLSHUTDOWN
 MOD
BTS3900, BTS3900 CELLSHUTDOWN
CellShutdown UlPrbOffset Uplink PRB offset
LTE LST
CELLSHUTDOWN

BTS3900, BTS3900 LST CELLSRLTE

CellSrlte LocalCellId Local cell ID
LTE MOD CELLSRLTE
 BTS3900, BTS3900 MOD CELLSRLTE
CellSrlte SrlteSwitch SRLTE Switch
LTE LST CELLSRLTE
 SRLTE DTX BTS3900, BTS3900 MOD CELLSRLTE
CellSrlte SrlteDtxThrd
Threshold LTE LST CELLSRLTE
 SRLTE Suspend BTS3900, BTS3900 MOD CELLSRLTE
CellSrlte SrlteSuspendTime
Time LTE LST CELLSRLTE

LST
CELLULICICMCPA
BTS3900, BTS3900 RA
CellULIcicMcPara LocalCellId Local cell ID
LTE MOD
CELLULICICMCPA
RA
 MOD
CELLULICICMCPA
Uplink ICIC A3 BTS3900, BTS3900 RA
CellULIcicMcPara A3Offset
offset LTE LST
CELLULICICMCPA
RA

LST
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo LocalCellId Local cell ID
LTE MOD
CELLULSCHALGO
 MOD
Uplink Scheduling BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UlschStrategy
Strategy LTE LST
CELLULSCHALGO
 MOD
adaptive HARQ BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo AdaptHarqSwitch
switch LTE LST
CELLULSCHALGO
 MOD
SinrAdjustTargetIble SINR target IBLER BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
r adjustment LTE LST
CELLULSCHALGO

System Bandwidth MOD

PreAllocationBand Ratio Used By Pre- BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
widthRatio schedule user per LTE LST
TTI CELLULSCHALGO
 MOD
PreAllocationMinPe minimal period of BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
riod pre-allocation LTE LST
CELLULSCHALGO

MOD
data size of pre- BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo PreAllocationSize
allocation LTE LST
CELLULSCHALGO
 MOD
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UlHoppingType Uplink hopping type
LTE LST
CELLULSCHALGO
 MOD
FreeUserUlRbUsed Free Users Uplink BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
Ratio RB Ratio LTE LST
CELLULSCHALGO
 MOD
UL scheduling
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UlSrSchDateLen request user data
LTE LST
length
CELLULSCHALGO

MOD
Semi-persistent
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo SpsRelThd resource implicit
LTE LST
release threshold
CELLULSCHALGO
 MOD
SmartPreAllocation Smart pre-allocation BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
Duration duration LTE LST
CELLULSCHALGO

MOD
UlEpfCapacityFacto Uplink EPF capacity BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
r factor LTE LST
CELLULSCHALGO
 MOD
Uplink Resource
UlRbAllocationStrat BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo Block Allocation
egy LTE LST
Strategy
CELLULSCHALGO
 MOD
Doppler BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo DopMeasLevel
Measurement Level LTE LST
CELLULSCHALGO
 Uplink HARQ MOD
Maximum BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UlHarqMaxTxNum
Transmission LTE LST
Number CELLULSCHALGO
 MOD
SmartPreAllocDura Sparse Smart Pre- BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
ForSparse allocation Duration LTE LST
CELLULSCHALGO
 MOD
Uplink Semi-
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UlSpsInterval persistent
LTE LST
Scheduling Interval
CELLULSCHALGO
 MOD
SriFalseDetThdSwit Sri False Detect BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
ch Threshold Switch LTE LST
CELLULSCHALGO

MOD
No UL Scheduling
NoUlSchTtiNumAfft BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo TTI Number After
erGap LTE LST
GAP
CELLULSCHALGO
 MOD
Uplink Delay-based
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UlDelaySchStrategy Scheduling
LTE LST
Strategy
CELLULSCHALGO
 MOD
Uplink Schedule
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UlSchAbnUeThd Abnormal Ue
LTE LST
Threshold
CELLULSCHALGO
 MOD
Specific Packet BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo SpecificPktSizeThd
Size Threshold LTE LST
CELLULSCHALGO

MOD
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo SrMaskSwitch SR Masking Switch
LTE LST
CELLULSCHALGO
 MOD
PUSCH DTX
PuschDtxSchStrate BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo Scheduling
gy LTE LST
Strategy
CELLULSCHALGO
 MOD
Max Number of UL
UlVoipRlcMaxSegN BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo RLC Segments for
um LTE LST
VoIP
CELLULSCHALGO
 MOD
Uplink Enhanced
UlEnhencedVoipSc BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo Voip Schedule
hSw LTE LST
Switch
CELLULSCHALGO
 MOD
Sinr Threshold of
UlInBasedFssSinrT BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UL FSS by
hld LTE LST
Interference
CELLULSCHALGO
 MOD
UL Coordinated
UlCamcDlRsrpOffs BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo AMC DL RSRP
et LTE LST
Offset
CELLULSCHALGO
 MOD
Statistic Num
StatisticNumThdFor BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo Threshold for TTIB
TtibTrig LTE LST
Trigger
CELLULSCHALGO
 MOD
Statistic Num
StatisticNumThdFor BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo Threshold for TTIB
TtibExit LTE LST
Exit
CELLULSCHALGO
 MOD
HystToExitTtiBundli Hysteresis to Exit BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
ng TTI Bundling LTE LST
CELLULSCHALGO
 MOD
TtiBundlingRlcMax TTIB Max Number BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
SegNum of RLC Segments LTE LST
CELLULSCHALGO

MOD
TTIB Max Number
TtiBundlingHarqMa BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo of HARQ
xTxNum LTE LST
Transmissions
CELLULSCHALGO
 MOD
TtiBundlingTriggerS TTI Bundling BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
trategy Trigger Strategy LTE LST
CELLULSCHALGO
 MOD
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo DopAlgoSwitch Doppler Algo Switch
LTE LST
CELLULSCHALGO
 MOD
EnhancedVmimoS Enhanced VMIMO BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
witch Switch LTE LST
CELLULSCHALGO
 MOD
Ue Num Threshold
UeNumThdInPdcch BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo in PDCCH PUSCH
PuschBal LTE LST
Balance
CELLULSCHALGO
 MOD
Data Threshold in
DataThdInPdcchPu BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo PDCCH and
schBal LTE LST
PUSCH Balance
CELLULSCHALGO
 MOD
HeadOverheadFor Head Overhead For BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
UlSch Uplink Scheduling LTE LST
CELLULSCHALGO

MOD
Minimal Period of
PreAllocMinPeriodF BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo Sparse Pre-
orSparse LTE LST
allocation
CELLULSCHALGO
 MOD
PreallocationSizeFo Data Size of Sparse BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
rSparse Pre-allocation LTE LST
CELLULSCHALGO

MOD
Uplink Interference
UlInterfRandomMod BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo Randomization
e LTE LST
Mode
CELLULSCHALGO
 MOD
SINR Adjustment
SinrAdjTargetIblerfo BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo Target IBLER for
rVoLTE LTE LST
VoLTE
CELLULSCHALGO
 MOD
SFN Uplink Load BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo SfnUlLoadPeriod
Period LTE LST
CELLULSCHALGO

MOD
MaxLayerHOVMIM Max Layer HO- BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
O VMIMO LTE LST
CELLULSCHALGO
 Min UL MOD
UlCompenSchPerio Compensate BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
dinSpurt Scheduling Period LTE LST
in Spurt CELLULSCHALGO
 Min UL MOD
UlCompenSchPerio Compensate BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
dinSilence Scheduling Period LTE LST
in Silence CELLULSCHALGO
 MOD
UlTargetIBlerAdaptT Uplink Target BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
ype IBLER Adapt Type LTE LST
CELLULSCHALGO
 MOD
Aperiodic CSI
AperiodicCsiUlTxM BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo Uplink Transmit
ode LTE LST
Mode
CELLULSCHALGO

MOD
Uplink VoIP BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UlVoipRsvRbStart
Reserved RB Start LTE LST
CELLULSCHALGO
 MOD
Uplink VoIP
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UlVoipRsvRbNum Reserved RB
LTE LST
Number
CELLULSCHALGO
 MOD
UlIBlerAdaptBigTraf IBLER Adapt Big BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
ficSw Packet Switch LTE LST
CELLULSCHALGO

MOD
VmimoOptAlgoSwit Vmimo Optimization BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo
ch Algorithm Switch LTE LST
CELLULSCHALGO
 MOD
UL Coordinated
BTS3900, BTS3900 CELLULSCHALGO
CellUlschAlgo UlCamcInterfTh AMC Interference
LTE LST
Threshold
CELLULSCHALGO

LST
CELLULUNIFIEDO
BTS3900, BTS3900 LC
CellULUnifiedOLC LocalCellId Local Cell ID
LTE MOD
CELLULUNIFIEDO
LC
 MOD
CELLULUNIFIEDO
High RRC Reject
RrcRejectRateHigh BTS3900, BTS3900 LC
CellULUnifiedOLC Rate Thd for UL
Thd LTE LST
Uni-OLC
CELLULUNIFIEDO
LC
 MOD
CELLULUNIFIEDO
Low RRC Reject
RrcRejectRateLowT BTS3900, BTS3900 LC
CellULUnifiedOLC Rate Thd for UL
hd LTE LST
Uni-OLC
CELLULUNIFIEDO
LC
 MOD
CELLULUNIFIEDO
High RRC Request
RrcReqNumHighTh BTS3900, BTS3900 LC
CellULUnifiedOLC Number Thd for UL
d LTE LST
Uni-OLC
CELLULUNIFIEDO
LC
 MOD
CELLULUNIFIEDO
Low RRC Request
RrcReqNumLowTh BTS3900, BTS3900 LC
CellULUnifiedOLC Number Thd for UL
d LTE LST
Uni-OLC
CELLULUNIFIEDO
LC
 MOD
CELLULUNIFIEDO
High UE Number BTS3900, BTS3900 LC
CellULUnifiedOLC UeNumHighThd
Thd for UL Uni-OLC LTE LST
CELLULUNIFIEDO
LC
 MOD
CELLULUNIFIEDO
Low UE Number BTS3900, BTS3900 LC
CellULUnifiedOLC UeNumLowThd
Thd for UL Uni-OLC LTE LST
CELLULUNIFIEDO
LC

LST
ENBCELLRSVDPA
BTS3900, BTS3900 RA
eNBCellRsvdPara LocalCellId Local cell ID
LTE MOD
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved Switch BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdSwPara0
Parameter 0 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved Switch BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdSwPara1
Parameter 1 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved Switch BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdSwPara2
Parameter 2 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved Switch BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdSwPara3
Parameter 3 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara2
Parameter 2 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara4
Parameter 4 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara5
Parameter 5 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara8
Parameter 8 LTE LST
ENBCELLRSVDPA
RA

LST
Reserved BTS3900, BTS3900
eNBCellRsvdPara RsvdPara9 ENBCELLRSVDPA
Parameter 9 LTE
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara10
Parameter 10 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara11
Parameter 11 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara13
Parameter 13 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara22
Parameter 22 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara23
Parameter 23 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara24
Parameter 24 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara25
Parameter 25 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara26
Parameter 26 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara27
Parameter 27 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara28
Parameter 28 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara29
Parameter 29 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara30
Parameter 30 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara31
Parameter 31 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara32
Parameter 32 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara33
Parameter 33 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara34
Parameter 34 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara35
Parameter 35 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara36
Parameter 36 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara37
Parameter 37 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara38
Parameter 38 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara39
Parameter 39 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara40
Parameter 40 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara41
Parameter 41 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara42
Parameter 42 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara43
Parameter 43 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara44
Parameter 44 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara45
Parameter 45 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara46
Parameter 46 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara47
Parameter 47 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara48
Parameter 48 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara49
Parameter 49 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara50
Parameter 50 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara51
Parameter 51 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara52
Parameter 52 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara53
Parameter 53 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara54
Parameter 54 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara55
Parameter 55 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara56
Parameter 56 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara57
Parameter 57 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara58
Parameter 58 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara59
Parameter 59 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara60
Parameter 60 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara61
Parameter 61 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara62
Parameter 62 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara63
Parameter 63 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara64
Parameter 64 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara65
Parameter 65 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara66
Parameter 66 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara67
Parameter 67 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara68
Parameter 68 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdPara69
Parameter 69 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U32 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU32Para1
Parameter 1 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U32 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU32Para2
Parameter 2 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U32 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU32Para3
Parameter 3 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U32 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU32Para4
Parameter 4 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U32 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU32Para5
Parameter 5 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U32 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU32Para6
Parameter 6 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U32 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU32Para7
Parameter 7 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U32 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU32Para8
Parameter 8 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para1
Parameter 1 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para2
Parameter 2 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para3
Parameter 3 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para4
Parameter 4 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para5
Parameter5 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para6
Parameter 6 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para7
Parameter 7 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para8
Parameter 8 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para9
Parameter 9 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para10
Parameter10 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para11
Parameter 11 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para12
Parameter 12 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para13
Parameter 13 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para14
Parameter 14 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para15
Parameter 15 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U16 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU16Para16
Parameter 16 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para1
Parameter 1 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para2
Parameter 2 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para3
Parameter 3 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para4
Parameter 4 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para5
Parameter 5 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para6
Parameter 6 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para7
Parameter 7 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para8
Parameter 8 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para9
Parameter 9 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para10
Parameter 10 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para11
Parameter 11 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para12
Parameter 12 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para13
Parameter 13 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para14
Parameter 14 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para15
Parameter 15 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para16
Parameter 16 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para17
Parameter 17 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para18
Parameter 18 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para19
Parameter 19 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para20
Parameter 20 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para21
Parameter 21 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para22
Parameter 22 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para23
Parameter 23 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para24
Parameter 24 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para25
Parameter 25 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para26
Parameter 26 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para27
Parameter 27 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para28
Parameter 28 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para29
Parameter 29 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para30
Parameter 30 LTE LST
ENBCELLRSVDPA
RA

MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para31
Parameter 31 LTE LST
ENBCELLRSVDPA
RA
 MOD
ENBCELLRSVDPA
Reserved U8 BTS3900, BTS3900 RA
eNBCellRsvdPara RsvdU8Para32
Parameter 32 LTE LST
ENBCELLRSVDPA
RA

LST
INTERRATCELLSH
InterRatCellShutdo BTS3900, BTS3900 UTDOWN
LocalCellId Local cell ID
wn LTE MOD
INTERRATCELLSH
UTDOWN

MOD
INTERRATCELLSH
InterRatCellShutdo ForceShutdownSwit Inter-RAT cell BTS3900, BTS3900 UTDOWN
wn ch shutdown switch LTE LST
INTERRATCELLSH
UTDOWN

MOD
INTERRATCELLSH
InterRatCellShutdo BTS3900, BTS3900 UTDOWN
StartTime Start time
wn LTE LST
INTERRATCELLSH
UTDOWN
 MOD
INTERRATCELLSH
InterRatCellShutdo BTS3900, BTS3900 UTDOWN
StopTime Stop time
wn LTE LST
INTERRATCELLSH
UTDOWN

MOD
INTERRATCELLSH
InterRatCellShutdo UE number BTS3900, BTS3900 UTDOWN
BearNumThd
wn threshold LTE LST
INTERRATCELLSH
UTDOWN
 MOD
INTERRATCELLSH
InterRatCellShutdo Downlink PRB BTS3900, BTS3900 UTDOWN
DlPrbThd
wn threshold LTE LST
INTERRATCELLSH
UTDOWN
 MOD
INTERRATCELLSH
InterRatCellShutdo Uplink PRB BTS3900, BTS3900 UTDOWN
UlPrbThd
wn threshold LTE LST
INTERRATCELLSH
UTDOWN
 MOD
INTERRATCELLSH
InterRatCellShutdo BTS3900, BTS3900 UTDOWN
ShutDownType Shut Down Type
wn LTE LST
INTERRATCELLSH
UTDOWN

MOD
INTERRATCELLSH
InterRatCellShutdo High Priority ARP BTS3900, BTS3900 UTDOWN
HighPriArpThd
wn Threshold LTE LST
INTERRATCELLSH
UTDOWN
 MOD
INTERRATCELLSH
UTRAN Cell
InterRatCellShutdo UtranCellDlLoadTh BTS3900, BTS3900 UTDOWN
Downlink Load
wn d LTE LST
Threshold
INTERRATCELLSH
UTDOWN
 MOD
INTERRATCELLSH
UTRAN Cell
InterRatCellShutdo UtranCellDlLoadOff BTS3900, BTS3900 UTDOWN
Downlink Load
wn set LTE LST
Offset
INTERRATCELLSH
UTDOWN
 MOD
INTERRATCELLSH
InterRatCellShutdo UtranCellUlLoadTh UTRAN Cell Uplink BTS3900, BTS3900 UTDOWN
wn d Load Threshold LTE LST
INTERRATCELLSH
UTDOWN
 MOD
INTERRATCELLSH
InterRatCellShutdo UtranCellUlLoadOff UTRAN Cell Uplink BTS3900, BTS3900 UTDOWN
wn set Load Offset LTE LST
INTERRATCELLSH
UTDOWN
 MOD
INTERRATCELLSH
InterRatCellShutdo GERAN Cell Load BTS3900, BTS3900 UTDOWN
GeranCellLoadThd
wn Threshold LTE LST
INTERRATCELLSH
UTDOWN
 MOD
INTERRATCELLSH
InterRatCellShutdo GeranCellLoadOffs GERAN Cell Load BTS3900, BTS3900 UTDOWN
wn et Offset LTE LST
INTERRATCELLSH
UTDOWN

LST
NCELLSRSMEASP
BTS3900, BTS3900 ARA
NCellSrsMeasPara LocalCellId Local Cell Id
LTE MOD
NCELLSRSMEASP
ARA
 MOD
SRS Auto NCELLSRSMEASP
SrsAutoNCellMeas Neighbour Cell BTS3900, BTS3900 ARA
NCellSrsMeasPara
Switch Measurement LTE LST
Switch NCELLSRSMEASP
ARA

MOD
SRS Auto NCELLSRSMEASP
NCellSrsMeasA3Off Neighbour Cell BTS3900, BTS3900 ARA
NCellSrsMeasPara
set Measurement A3 LTE LST
Offset NCELLSRSMEASP
ARA

LST
RRUJOINTCALPA
BTS3900, BTS3900 RACFG
RruJointCalParaCfg LocalCellId Local cell ID
LTE MOD
RRUJOINTCALPA
RACFG
 MOD
RRUJOINTCALPA
Tx Channel BTS3900, BTS3900 RACFG
RruJointCalParaCfg TxChnCalSwitch
Calibration Switch LTE LST
RRUJOINTCALPA
RACFG

MOD
RRUJOINTCALPA
Tx Channel BTS3900, BTS3900 RACFG
RruJointCalParaCfg TxChnCalTime
Calibration Time LTE LST
RRUJOINTCALPA
RACFG
 MOD
RRUJOINTCALPA
Tx Channel BTS3900, BTS3900 RACFG
RruJointCalParaCfg TxChnCalPeriod
Calibration Period LTE LST
RRUJOINTCALPA
RACFG

MOD
RRUJOINTCALPA
Physical Antenna BTS3900, BTS3900 RACFG
RruJointCalParaCfg TxChnAntSpacing
Horizontal Spacing LTE LST
RRUJOINTCALPA
RACFG
 ADD
SUPERCOMBCELL
LST
BTS3900, BTS3900 SUPERCOMBCELL
SuperCombCell LocalCellId Local Cell ID
LTE MOD
SUPERCOMBCELL
RMV
SUPERCOMBCELL

ADD
SUPERCOMBCELL
BTS3900, BTS3900 MOD
SuperCombCell SfnCellId SFN Cell ID
LTE SUPERCOMBCELL
LST
SUPERCOMBCELL

LST
ULZEROBUFFERZ
BTS3900, BTS3900 ONE
ULZeroBufferZone LocalCellId Local cell ID
LTE MOD
ULZEROBUFFERZ
ONE

MOD
ULZEROBUFFERZ
ULSharedFreqStart UL Shared BTS3900, BTS3900 ONE
ULZeroBufferZone
RB Spectrum Start RB LTE LST
ULZEROBUFFERZ
ONE

MOD
ULZEROBUFFERZ
ULSharedFreqEnd UL Shared BTS3900, BTS3900 ONE
ULZeroBufferZone
RB Spectrum End RB LTE LST
ULZEROBUFFERZ
ONE

MOD
ULZEROBUFFERZ
UL Zero Buffer
ULZeroBufZonePR BTS3900, BTS3900 ONE
ULZeroBufferZone Zone Uplink PRB
BThd LTE LST
Threshold
ULZEROBUFFERZ
ONE
 MOD
ULZEROBUFFERZ
UL Zero Buffer
ULZeroBufZonePR BTS3900, BTS3900 ONE
ULZeroBufferZone Zone Uplink PRB
BOffset LTE LST
Offset
ULZEROBUFFERZ
ONE

MOD
ULZEROBUFFERZ
UL Zero Buffer
ULZeroBufZoneRsr BTS3900, BTS3900 ONE
ULZeroBufferZone Zone Downlink
pThd LTE LST
RSRP Threshold
ULZEROBUFFERZ
ONE

MOD
ULZEROBUFFERZ
UL Zero Buffer
ULZeroBufZoneRsr BTS3900, BTS3900 ONE
ULZeroBufferZone Zone Downlink
pOffset LTE LST
RSRP Offset
ULZEROBUFFERZ
ONE

MOD
ULZEROBUFFERZ
UL Zero Buffer
ULZeroBufZoneB1 BTS3900, BTS3900 ONE
ULZeroBufferZone Zone B1 Remove
RmvOffset LTE LST
Offset
ULZEROBUFFERZ
ONE

MOD
ULZEROBUFFERZ
ULZeroBufZoneUtr UTRAN RSCP BTS3900, BTS3900 ONE
ULZeroBufferZone
anRscpThd Report Threshold LTE LST
ULZEROBUFFERZ
ONE

MOD
ULZEROBUFFERZ
UL Zero Buffer
ULZeroBufZoInterR BTS3900, BTS3900 ONE
ULZeroBufferZone Zone Inter Rat B1
atB1Timer LTE LST
Timer
ULZEROBUFFERZ
ONE
 LST
UPPTSINTERFCF
BTS3900, BTS3900 G
UpPTSInterfCfg LocalCellId Local cell ID
LTE MOD
UPPTSINTERFCF
G

MOD
UPPTSINTERFCF
BTS3900, BTS3900 G
UpPTSInterfCfg TestPeriod Adjust Period
LTE LST
UPPTSINTERFCF
G

MOD
UPPTSINTERFCF
BTS3900, BTS3900 G
UpPTSInterfCfg TestThreshold Test Threshold
LTE LST
UPPTSINTERFCF
G
 MOD
UPPTSINTERFCF
BTS3900, BTS3900 G
UpPTSInterfCfg TestHysteresis Test Hysteresis
LTE LST
UPPTSINTERFCF
G

LST
BTS3900, BTS3900 USERVPFMPARA
UserVpfmPara LocalCellId Local cell ID
LTE MOD
USERVPFMPARA

MOD
Downlink User
BTS3900, BTS3900 USERVPFMPARA
UserVpfmPara DlUserThruputThd0 Throughput
LTE LST
Threshold 0
USERVPFMPARA
 MOD
Downlink User
BTS3900, BTS3900 USERVPFMPARA
UserVpfmPara DlUserThruputThd1 Throughput
LTE LST
Threshold 1
USERVPFMPARA

MOD
Downlink User
BTS3900, BTS3900 USERVPFMPARA
UserVpfmPara DlUserThruputThd2 Throughput
LTE LST
Threshold 2
USERVPFMPARA

MOD
Downlink User
BTS3900, BTS3900 USERVPFMPARA
UserVpfmPara DlUserThruputThd3 Throughput
LTE LST
Threshold 3
USERVPFMPARA
 MOD
Downlink User
BTS3900, BTS3900 USERVPFMPARA
UserVpfmPara DlUserThruputThd4 Throughput
LTE LST
Threshold 4
USERVPFMPARA

MOD
Uplink Access
UlAccessDelayGoo BTS3900, BTS3900 USERVPFMPARA
UserVpfmPara Delay Good
dThd LTE LST
Threshold
USERVPFMPARA

MOD
Uplink Access
UlAccessDelayBad BTS3900, BTS3900 USERVPFMPARA
UserVpfmPara Delay Bad
Thd LTE LST
Threshold
USERVPFMPARA
 MOD
Downlink Access
DlAccessDelayGoo BTS3900, BTS3900 USERVPFMPARA
UserVpfmPara Delay Good
dThd LTE LST
Threshold
USERVPFMPARA
 MOD
Downlink Access
DlAccessDelayBad BTS3900, BTS3900 USERVPFMPARA
UserVpfmPara Delay Bad
Thd LTE LST
Threshold
USERVPFMPARA

LST
WTCPPROXYALG
BTS3900, BTS3900 O
WtcpProxyAlgo LocalCellId Local cell ID
LTE MOD
WTCPPROXYALG
O
 MOD
WTCPPROXYALG
TcpAccelerationSwit TCP Acceleration BTS3900, BTS3900 O
WtcpProxyAlgo
ch Switch LTE LST
WTCPPROXYALG
O

MOD
WTCPPROXYALG
TCP Statistics BTS3900, BTS3900 O
WtcpProxyAlgo TCPStatisticsSwitch
Switch LTE LST
WTCPPROXYALG
O
 MOD
WTCPPROXYALG
Max RTT Statistic BTS3900, BTS3900 O
WtcpProxyAlgo MaxRttStatisticsThd
Threshold LTE LST
WTCPPROXYALG
O

DSP
CELLULCAMCCLU
STER
LST
BTS3900, BTS3900
CellAlgoSwitch LocalCellId Local cell ID CELLALGOSWITC
LTE
H
MOD
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
RACH algorithm BTS3900, BTS3900 H
CellAlgoSwitch RachAlgoSwitch
switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
SoundingRS BTS3900, BTS3900 H
CellAlgoSwitch SrsAlgoSwitch
algorithm switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
PUCCH algorithm BTS3900, BTS3900 H
CellAlgoSwitch PucchAlgoSwitch
switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
AQM algorithm BTS3900, BTS3900 H
CellAlgoSwitch AqmAlgoSwitch
switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
CQI Adjust BTS3900, BTS3900 H
CellAlgoSwitch CqiAdjAlgoSwitch
Algorithm Switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
Dynamic adjust
BTS3900, BTS3900 H
CellAlgoSwitch DynAdjVoltSwitch voltage algorithm
LTE LST
switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
RAC algorithm BTS3900, BTS3900 H
CellAlgoSwitch RacAlgoSwitch
switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Load balancing BTS3900, BTS3900 H
CellAlgoSwitch MlbAlgoSwitch
algorithm switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Downlink power
BTS3900, BTS3900 H
CellAlgoSwitch DlPcAlgoSwitch control algorithm
LTE LST
switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Uplink power
BTS3900, BTS3900 H
CellAlgoSwitch UlPcAlgoSwitch control algorithm
LTE LST
switch
CELLALGOSWITC
H

MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch BfAlgoSwitch BF algorithm switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch DlSchSwitch DL schedule switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Uplink schedule BTS3900, BTS3900 H
CellAlgoSwitch UlSchSwitch
switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
RanShareModeSwit RAN Sharing Mode BTS3900, BTS3900 H
CellAlgoSwitch
ch Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Based on
FreqPriorityHoSwitc BTS3900, BTS3900 H
CellAlgoSwitch Frequency Priority
h LTE LST
HO Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
MUBF Algorithm BTS3900, BTS3900 H
CellAlgoSwitch MuBfAlgoSwitch
Switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
Distance-based BTS3900, BTS3900 H
CellAlgoSwitch DistBasedHoSwitch
Handover Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
AcBar algorithms BTS3900, BTS3900 H
CellAlgoSwitch AcBarAlgoSwitch
switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
SFN UL Scheduling BTS3900, BTS3900 H
CellAlgoSwitch SfnUlSchSwitch
Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
SFN DL Scheduling BTS3900, BTS3900 H
CellAlgoSwitch SfnDlSchSwitch
Switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch IrcSwitch IRC Switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Dynamic DRX BTS3900, BTS3900 H
CellAlgoSwitch DynDrxSwitch
switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
High Mobility
HighMobiTrigIdleMo BTS3900, BTS3900 H
CellAlgoSwitch Triggered Idle Mode
deSwitch LTE LST
Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Interference BTS3900, BTS3900 H
CellAlgoSwitch AvoidInterfSwitch
avoidance switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
GL power share BTS3900, BTS3900 H
CellAlgoSwitch GLPwrShare
switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch EicicSwitch Eicic Switch
LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
PUCCH Resource
PUSCHMaxRBPUC BTS3900, BTS3900 H
CellAlgoSwitch Switch Based on
CHAdjSwitch LTE LST
UL Peak Rate
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Downlink CoMP BTS3900, BTS3900 H
CellAlgoSwitch DlCompSwitch
algorithms switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
PSIC algorithm BTS3900, BTS3900 H
CellAlgoSwitch PsicSwitch
switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Load Balancing BTS3900, BTS3900 H
CellAlgoSwitch MlbHoMode
Handover Policy LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch UplinkCompSwitch UplinkCompSwitch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
AntCalibrationAlgo Antenna calibration BTS3900, BTS3900 H
CellAlgoSwitch
Switch algorithm switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
DynSpectrumShare Dynamic Spectrum BTS3900, BTS3900 H
CellAlgoSwitch
Switch Share Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
SfnLoadBasedAdpt SFN Load-based BTS3900, BTS3900 H
CellAlgoSwitch
Switch Adaptive Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
PUSCH IRC BTS3900, BTS3900 H
CellAlgoSwitch PuschIrcAlgoSwitch
algorithm switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
ReselecPriAdaptSw Reselection Priority BTS3900, BTS3900 H
CellAlgoSwitch
itch Adaptive Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
ANR Function BTS3900, BTS3900 H
CellAlgoSwitch AnrFunctionSwitch
Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
SFN Algorithm BTS3900, BTS3900 H
CellAlgoSwitch SfnAlgoSwitch
Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Prach Interference BTS3900, BTS3900 H
CellAlgoSwitch PrachIntrfRejSwitch
Rejection Switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
Enhanced MIMO BTS3900, BTS3900 H
CellAlgoSwitch EnhMIMOSwitch
Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Interference
BTS3900, BTS3900 H
CellAlgoSwitch InterfRandSwitch Randomize
LTE LST
Algorithm Switch
CELLALGOSWITC
H

MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch RepeaterSwitch Repeater Switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Multi Frequency
MultiFreqPriControl BTS3900, BTS3900 H
CellAlgoSwitch Priority Control
Switch LTE LST
Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Harq Algorithm BTS3900, BTS3900 H
CellAlgoSwitch HarqAlgoSwitch
Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Coverage Based
CovBasedInterFreq BTS3900, BTS3900 H
CellAlgoSwitch Inter Frequency
HoMode LTE LST
Handover Mode
CELLALGOSWITC
H

MOD
CELLALGOSWITC
LteUtcBroadcastSw Lte Utc Broadcast BTS3900, BTS3900 H
CellAlgoSwitch
itch Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
CellSchStrategySwi Cell Schedule BTS3900, BTS3900 H
CellAlgoSwitch
tch Strategy Switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
SSRD Algorithm BTS3900, BTS3900 H
CellAlgoSwitch SsrdAlgoSwitch
Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
SfnUplinkCompSwit SFN Uplink Comp BTS3900, BTS3900 H
CellAlgoSwitch
ch Switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
Low Speed User
LowSpeedInterFreq BTS3900, BTS3900 H
CellAlgoSwitch Inter-frequency
HoSwitch LTE LST
Handover Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch RelaySwitch Relay Switch
LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
Inter-frequency
InterFreqDirectHoS BTS3900, BTS3900 H
CellAlgoSwitch Directional
witch LTE LST
Handover Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Power Derating BTS3900, BTS3900 H
CellAlgoSwitch PwrDeratSwitch
Switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
DetectionAlgoSwitc DetectionAlgoSwitc BTS3900, BTS3900 H
CellAlgoSwitch
h h LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Pucch IRC BTS3900, BTS3900 H
CellAlgoSwitch PucchIRCEnhance
Enhance LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
AcBarAlgoforDynS Ac Bar Algorithm BTS3900, BTS3900 H
CellAlgoSwitch
witch Switch for Dynamic LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch CreSwitch CRE Switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Backoff Algorithm BTS3900, BTS3900 H
CellAlgoSwitch BackoffAlgoSwitch
Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Handover Allowed BTS3900, BTS3900 H
CellAlgoSwitch HoAllowedSwitch
Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Neighbor Cell
BTS3900, BTS3900 H
CellAlgoSwitch NCellClassMgtSw Classification Mgt
LTE LST
Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Specified PCI
SpePCIBasedPolic BTS3900, BTS3900 H
CellAlgoSwitch Based Policy
ySw LTE LST
Switch
CELLALGOSWITC
H
 MOD
Cell Passive Inter- CELLALGOSWITC
CellPIMInterMitigS Modulation BTS3900, BTS3900 H
CellAlgoSwitch
witch Interference LTE LST
Mitigation Switch CELLALGOSWITC
H

MOD
CELLALGOSWITC
PrachJointReceptio Prach Joint BTS3900, BTS3900 H
CellAlgoSwitch
nSwitch Reception Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch FeicicSwitch FeICIC Switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Coordinated AMC BTS3900, BTS3900 H
CellAlgoSwitch CamcSwitch
Switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch RruUeMapSwitch RU Ue Map Switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
High Speed
HighSpeedSchOpt BTS3900, BTS3900 H
CellAlgoSwitch Schedule
Switch LTE LST
Optimized Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Service
BTS3900, BTS3900 H
CellAlgoSwitch ServiceDiffSwitch Differentiated
LTE LST
Switch
CELLALGOSWITC
H

MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch LtePttQoSSwitch PTT QoS Switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
SRS and PUCCH
SrsPucchEnhanced BTS3900, BTS3900 H
CellAlgoSwitch Allocation
Switch LTE LST
Enhanced Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
UEInactiveTimerQC UE Inactive Timer BTS3900, BTS3900 H
CellAlgoSwitch
I1Switch for QCI1 Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
UL JR Antenna
UlJRAntNumComb BTS3900, BTS3900 H
CellAlgoSwitch Number Combined
Sw LTE LST
Switch
CELLALGOSWITC
H

MOD
CELLALGOSWITC
VamPhaseShiftAlgo VAM Phase Shift BTS3900, BTS3900 H
CellAlgoSwitch
Switch Algorithm Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
ANR Algorithm BTS3900, BTS3900 H
CellAlgoSwitch AnrAlgoSwitch
Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Dl256QamAlgoSwit Downlink 256QAM BTS3900, BTS3900 H
CellAlgoSwitch
ch Algorithm Switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
MLB Auto Group
MlbAutoGroupSwitc BTS3900, BTS3900 H
CellAlgoSwitch Configuration
h LTE LST
Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
CA Auto Group
CaAutoGroupSwitc BTS3900, BTS3900 H
CellAlgoSwitch Configuration
h LTE LST
Switch
CELLALGOSWITC
H

MOD
CELLALGOSWITC
AttachCellSelfCfgS Attach Cell Auto BTS3900, BTS3900 H
CellAlgoSwitch
witch Config Switch LTE LST
CELLALGOSWITC
H
 MOD
Downlink Cell CELLALGOSWITC
CellDlCoverEnhanc Coverage BTS3900, BTS3900 H
CellAlgoSwitch
eSwitch Enhancement LTE LST
Switch CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Uplink Schedule BTS3900, BTS3900 H
CellAlgoSwitch UlSchExtSwitch
Extended Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
UL Data
BTS3900, BTS3900 H
CellAlgoSwitch UdcAlgoSwitch Compression
LTE LST
Algorithm Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch VoLTESwitch VoLTE Switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
VoIP Decryption
VoipFailDecSelfRec BTS3900, BTS3900 H
CellAlgoSwitch Failure Self
Switch LTE LST
Recovery Switch
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
DeprioritisationDeliv Deprioritisation BTS3900, BTS3900 H
CellAlgoSwitch
erInd Deliver Indicator LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch CmasSwitch Cmas Switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
PciConflictReportS PCI Conflict Report BTS3900, BTS3900 H
CellAlgoSwitch
witch Switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
MRO algorithm BTS3900, BTS3900 H
CellAlgoSwitch MroSwitch
switch LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Cell Recovery BTS3900, BTS3900 H
CellAlgoSwitch CellRecoverySwitch
Switch LTE LST
CELLALGOSWITC
H

MOD
CELLALGOSWITC
BTS3900, BTS3900 H
CellAlgoSwitch TrafficMlbSwitch Traffic MLB Switch
LTE LST
CELLALGOSWITC
H
 MOD
CELLALGOSWITC
Measurement
MeasOptAlgoSwitc BTS3900, BTS3900 H
CellAlgoSwitch Optimization
h LTE LST
Algorithm Switch
CELLALGOSWITC
H

BTS3900, BTS3900 LST CELLDLICIC

CellDlIcic LocalCellId Local cell ID
LTE MOD CELLDLICIC
 Downlink band BTS3900, BTS3900 MOD CELLDLICIC
CellDlIcic BandMode
division scheme LTE LST CELLDLICIC
 DlIcicUserAttrGfact User Attribution BTS3900, BTS3900 MOD CELLDLICIC
CellDlIcic
orThd Gfactor Threshold LTE LST CELLDLICIC
 DlIcicNoiseUserRsr Noise User RSRP BTS3900, BTS3900 MOD CELLDLICIC
CellDlIcic
pThd Threshold LTE LST CELLDLICIC

LST
BTS3900, BTS3900 CELLDLPCPDCCH
CellDlpcPdcch LocalCellId Local cell ID
LTE MOD
CELLDLPCPDCCH
 MOD
DCI power offset for BTS3900, BTS3900 CELLDLPCPDCCH
CellDlpcPdcch DediDciPwrOffset
dedicated control LTE LST
CELLDLPCPDCCH

LST
BTS3900, BTS3900 CELLDLPCPDSCH
CellDlpcPdsch LocalCellId Local cell ID
LTE MOD
CELLDLPCPDSCH
 MOD
BTS3900, BTS3900 CELLDLPCPDSCH
CellDlpcPdsch CcuPa Center UE PA
LTE LST
CELLDLPCPDSCH
 MOD
BTS3900, BTS3900 CELLDLPCPDSCH
CellDlpcPdsch CeuPa Edge UE PA
LTE LST
CELLDLPCPDSCH

MOD
CellEdgLoadEvalPr Cell Edge Load BTS3900, BTS3900 CELLDLPCPDSCH
CellDlpcPdsch
d Evaluation Period LTE LST
CELLDLPCPDSCH
 MOD
Neighboring Cell
NeighCellEdgLoad BTS3900, BTS3900 CELLDLPCPDSCH
CellDlpcPdsch Edge Load
Thd LTE LST
Threshold
CELLDLPCPDSCH
 Ratio of Cells
MOD
Exceeding
ExceedNCellEdgLo BTS3900, BTS3900 CELLDLPCPDSCH
CellDlpcPdsch Neighboring Cell
adThdRatio LTE LST
Edge Load
CELLDLPCPDSCH
Threshold
 MOD
BFUserPwrBoostPr BF User Power BTS3900, BTS3900 CELLDLPCPDSCH
CellDlpcPdsch
d Boost Period LTE LST
CELLDLPCPDSCH
 MOD
BF Mode User
BFUserAdptPwrA3 BTS3900, BTS3900 CELLDLPCPDSCH
CellDlpcPdsch Adaptive Power A3
Offset LTE LST
offset
CELLDLPCPDSCH

MOD
BF Mode User
BFUserAdptPwrA6 BTS3900, BTS3900 CELLDLPCPDSCH
CellDlpcPdsch Adaptive Power A6
Offset LTE LST
offset
CELLDLPCPDSCH
 LST
BTS3900, BTS3900 CELLDLPCPHICH
CellDlpcPhich LocalCellId Local cell ID
LTE MOD
CELLDLPCPHICH

MOD
Phich Pc Off Power BTS3900, BTS3900 CELLDLPCPHICH
CellDlpcPhich PwrOffset
Offset LTE LST
CELLDLPCPHICH

DSP
CELLCOVENHSTU
S
BTS3900, BTS3900 DSP LBT
CellDlschAlgo LocalCellId Local cell ID
LTE LST
CELLDLSCHALGO
MOD
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
Downlink BTS3900, BTS3900
CellDlschAlgo DlschStrategy CELLCOVENHSTU
scheduling Strategy LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
FreeUserDlRbUsed Free Users BTS3900, BTS3900
CellDlschAlgo CELLCOVENHSTU
Ratio Downlink RB Ratio LTE
S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DSP
maximum number BTS3900, BTS3900
CellDlschAlgo MaxMimoRankPara CELLCOVENHSTU
of MIMO layers LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
Downlink CA BTS3900, BTS3900
CellDlschAlgo CaSchStrategy CELLCOVENHSTU
Schedule Strategy LTE
S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
Reserved resource DSP
NonGbrResourceR BTS3900, BTS3900
CellDlschAlgo ratio for non-GBR CELLCOVENHSTU
atio LTE
services S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
DlEpfCapacityFacto Downlink EPF BTS3900, BTS3900
CellDlschAlgo CELLCOVENHSTU
r capacity factor LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
RB Priority MCS DSP
RBPriMcsSelectRat BTS3900, BTS3900
CellDlschAlgo Select Ratio CELLCOVENHSTU
ioThd LTE
Threshold S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
CellEdgeUserRbAll Cell Edge User RB BTS3900, BTS3900
CellDlschAlgo CELLCOVENHSTU
ocMode Allocation Mode LTE
S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DSP
Downlink ICIC BTS3900, BTS3900
CellDlschAlgo DlIcicSchMode CELLCOVENHSTU
Schedule Mode LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
RBG Resource BTS3900, BTS3900
CellDlschAlgo RbgAllocStrategy CELLCOVENHSTU
Allocation Strategy LTE
S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
Dowlink HARQ
DSP
Maximum BTS3900, BTS3900
CellDlschAlgo DlHarqMaxTxNum CELLCOVENHSTU
Transmission LTE
S
Number
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DSP
NonGbrSchDelayW NonGBR Traffic BTS3900, BTS3900
CellDlschAlgo CELLCOVENHSTU
eight Delay Weight LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
Handover UE Static DSP
BTS3900, BTS3900
CellDlschAlgo HoStaticMcsTimer MCS Scheduling CELLCOVENHSTU
LTE
Timer S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
DlRankOptimizeSwi Downlink Rank BTS3900, BTS3900
CellDlschAlgo CELLCOVENHSTU
tch Optimize Switch LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
Ca Scc Doppler BTS3900, BTS3900
CellDlschAlgo CaSccDopMeas CELLCOVENHSTU
Measurement LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
Downlink Semi- DSP
BTS3900, BTS3900
CellDlschAlgo DlSpsInterval persistent CELLCOVENHSTU
LTE
Scheduling Interval S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
RBPriMcsSelectStr RB Priority MCS BTS3900, BTS3900
CellDlschAlgo CELLCOVENHSTU
ategy Select Strategy LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
DlRankDetectSwitc Downlink Rank BTS3900, BTS3900
CellDlschAlgo CELLCOVENHSTU
h Detect Switch LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
MBSFN Subframe BTS3900, BTS3900
CellDlschAlgo MbsfnSfCfg CELLCOVENHSTU
Configuration LTE
S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
TDD Special DSP
TddSpecSubfSchS BTS3900, BTS3900
CellDlschAlgo Subframe CELLCOVENHSTU
witch LTE
Scheduling Switch S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
Data Threshold In DSP
DataThdInPdcchPd BTS3900, BTS3900
CellDlschAlgo Pdcch And Pdsch CELLCOVENHSTU
schBal LTE
Balance S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
Ue Num Threshold DSP
UeNumThdInPdcch BTS3900, BTS3900
CellDlschAlgo In Pdcch And CELLCOVENHSTU
PdschBal LTE
Pdsch Balance S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
eNodeB DSP
BTS3900, BTS3900
CellDlschAlgo EnbInterfRandMod Interference CELLCOVENHSTU
LTE
Randomize Modular S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
TxD DCI1A BTS3900, BTS3900
CellDlschAlgo TxdDci1aSwitch CELLCOVENHSTU
Scheduling Switch LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
Downlink Schedule DSP
BTS3900, BTS3900
CellDlschAlgo DlSchAbnUeThd Abnormal Ue CELLCOVENHSTU
LTE
Threshold S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
Code Rate for
DSP
Random Access BTS3900, BTS3900
CellDlschAlgo RarAndPagingCR CELLCOVENHSTU
Response and LTE
S
Paging Message
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DSP
CQI Adjustment BTS3900, BTS3900
CellDlschAlgo CqiAdjInitialStep CELLCOVENHSTU
Initial Step LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
CSI-RS Subfame DSP
CsiRsSfSchStrSwit BTS3900, BTS3900
CellDlschAlgo Scheduling CELLCOVENHSTU
ch LTE
Strategy Switch S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
SFN Downlink Load BTS3900, BTS3900
CellDlschAlgo SfnDlLoadPeriod CELLCOVENHSTU
Period LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
FreqSelJudgePerio Frequency Select BTS3900, BTS3900
CellDlschAlgo CELLCOVENHSTU
d Judge Period LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
Downlink Enhanced DSP
DlEnhancedVoipSc BTS3900, BTS3900
CellDlschAlgo Voip Schedule CELLCOVENHSTU
hSw LTE
Switch S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
FD UE Enhanced DSP
FDUEEnhAperCQI BTS3900, BTS3900
CellDlschAlgo Aperiodic CQI CELLCOVENHSTU
TrigPeriod LTE
Trigger Period S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DSP
SFN Downlink High BTS3900, BTS3900
CellDlschAlgo SfnDlHighLoadThd CELLCOVENHSTU
Load Threshold LTE
S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DSP
SFN Downlink Low BTS3900, BTS3900
CellDlschAlgo SfnDlLowLoadThd CELLCOVENHSTU
Load Threshold LTE
S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
Downlink High Load DSP
DlHighLoadSdmaT BTS3900, BTS3900
CellDlschAlgo SDMA Threshold CELLCOVENHSTU
hdOffset LTE
Offset S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DSP
Listen Before Talk BTS3900, BTS3900
CellDlschAlgo LbtSwitch CELLCOVENHSTU
Switch LTE
S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DSP
Noise Interference BTS3900, BTS3900
CellDlschAlgo LbtNiHighThreshold CELLCOVENHSTU
High Threshold LTE
S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DSP
Noise Interference BTS3900, BTS3900
CellDlschAlgo LbtNiLowThreshold CELLCOVENHSTU
Low Threshold LTE
S
LST
CELLDLSCHALGO

DSP
Listen Before Talk BTS3900, BTS3900 CELLCOVENHSTU
CellDlschAlgo LbtDetectTime
Detect Time LTE S
DSP LBT
 DSP
Listen Before Talk BTS3900, BTS3900 CELLCOVENHSTU
CellDlschAlgo LbtTransmitStatus
Transmit Status LTE S
DSP LBT

DSP
Listen Before Talk
BTS3900, BTS3900 CELLCOVENHSTU
CellDlschAlgo LbtNiPower Noise Interfere
LTE S
Power
DSP LBT

MOD
CELLDLSCHALGO
Enhanced Aperiodic DSP
EnAperiodicCqiTrig BTS3900, BTS3900
CellDlschAlgo CQI Trigger CELLCOVENHSTU
Strategy LTE
Strategy S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DL CA UE DSP
DlCaUeCapAllocStr BTS3900, BTS3900
CellDlschAlgo Capability Allocation CELLCOVENHSTU
ategy LTE
Strategy S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DSP
DlCaUserSchSwitc DL CA User BTS3900, BTS3900
CellDlschAlgo CELLCOVENHSTU
h Scheduling Switch LTE
S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DL 256QAM CQI DSP
Dl256QamCqiTblAd BTS3900, BTS3900
CellDlschAlgo Table Adaptive CELLCOVENHSTU
pPeriod LTE
Period S
LST
CELLDLSCHALGO
 MOD
CELLDLSCHALGO
DL 256QAM CQI DSP
Dl256QamCqiTblCf BTS3900, BTS3900
CellDlschAlgo Table Configure CELLCOVENHSTU
gStrategy LTE
Strategy S
LST
CELLDLSCHALGO

MOD
CELLDLSCHALGO
DSP
BenefitMcsThreshol Benefit User MCS BTS3900, BTS3900
CellDlschAlgo CELLCOVENHSTU
d Threshold LTE
S
LST
CELLDLSCHALGO
 Cell Coverage DSP
BTS3900, BTS3900
CellDlschAlgo CellCovEnhStus Enhancement CELLCOVENHSTU
LTE
Status S

MOD
CELLDLSCHALGO
DL SPS MCS DSP
DlSpsMcsDecrease BTS3900, BTS3900
CellDlschAlgo Decrease IBLER CELLCOVENHSTU
IblerThd LTE
Threshold S
LST
CELLDLSCHALGO
 MOD
Downlink AFC Max BTS3900, BTS3900 CELLDLSCHALGO
CellDlschAlgo DlAfcMaxFreq
Frequency LTE LST
CELLDLSCHALGO
 MOD
SRS RSRP Filtering
SrsRsrpFilterCoefF BTS3900, BTS3900 CELLDLSCHALGO
CellDlschAlgo Coefficient for DL
orDlAfc LTE LST
AFC
CELLDLSCHALGO
 DSP
BTS3900, BTS3900
CellDlschAlgo Cause Remarks CELLCOVENHSTU
LTE
S

BTS3900, BTS3900 LST CELLMLB

CellMLB LocalCellId Local cell ID
LTE MOD CELLMLB
 Inter-Frequency
Mobility Load BTS3900, BTS3900 MOD CELLMLB
CellMLB InterFreqMlbThd
Balancing LTE LST CELLMLB
Threshold
 Inter-RAT Mobility
BTS3900, BTS3900 MOD CELLMLB
CellMLB InterRatMlbThd Load Balancing
LTE LST CELLMLB
Threshold
 BTS3900, BTS3900 MOD CELLMLB
CellMLB LoadOffset Load Offset
LTE LST CELLMLB
 Load Difference BTS3900, BTS3900 MOD CELLMLB
CellMLB LoadDiffThd
Threshold LTE LST CELLMLB
 Inter-RAT Mobility
InterRatMlbUeNum BTS3900, BTS3900 MOD CELLMLB
CellMLB Load Balancing UE
Thd LTE LST CELLMLB
Number Threshold

UTRAN Idle Mode

Mobility Load BTS3900, BTS3900 MOD CELLMLB
CellMLB InitValidPeriod
Balancing Initial LTE LST CELLMLB
Valid Period
 Load Transfer BTS3900, BTS3900 MOD CELLMLB
CellMLB LoadTransferFactor
Factor LTE LST CELLMLB

Mobility Load
BTS3900, BTS3900 MOD CELLMLB
CellMLB MlbTriggerMode Balancing Trigger
LTE LST CELLMLB
Mode
 Inter-frequency
InterFreqMlbUeNu Mobility Load BTS3900, BTS3900 MOD CELLMLB
CellMLB
mThd Balancing UE LTE LST CELLMLB
Number Threshold
 Mobility Load
BTS3900, BTS3900 MOD CELLMLB
CellMLB MlbUeNumOffset Balancing UE
LTE LST CELLMLB
Number Offset
 Mobility Load
BTS3900, BTS3900 MOD CELLMLB
CellMLB MlbMaxUeNum Balancing Max UE
LTE LST CELLMLB
Number
 Mobility Load
Balancing UE BTS3900, BTS3900 MOD CELLMLB
CellMLB MlbUeSelectPrbThd
Selection PRB LTE LST CELLMLB
Usage Threshold

Downlink Data- BTS3900, BTS3900 MOD CELLMLB

CellMLB DlDataMlbMode
transfer MLB mode LTE LST CELLMLB
 Inter-Frequency
InterFreqMLBRanS BTS3900, BTS3900 MOD CELLMLB
CellMLB MLB RAN Sharing
hareMode LTE LST CELLMLB
Mode
 Ue Number
BTS3900, BTS3900 MOD CELLMLB
CellMLB UeNumDiffThd Difference
LTE LST CELLMLB
Threshold

BTS3900, BTS3900 MOD CELLMLB

CellMLB HotSpotUeMode Hot Spot UE Mode
LTE LST CELLMLB
 Inter-Frequency
InterFreqIdleMlbMo BTS3900, BTS3900 MOD CELLMLB
CellMLB Idle Load Balancing
de LTE LST CELLMLB
Mode
 MLB Minimum UE BTS3900, BTS3900 MOD CELLMLB
CellMLB MlbMinUeNumThd
Number Threshold LTE LST CELLMLB
 MlbMinUeNumOffs MLB Minimum UE BTS3900, BTS3900 MOD CELLMLB
CellMLB
et Number Offset LTE LST CELLMLB
 InterFreqUeTrsfTyp InterFreq MLB BTS3900, BTS3900 MOD CELLMLB
CellMLB
e Transfer Type LTE LST CELLMLB
 Inter-Freq Idle MLB
InterFreqIdleMlbUe BTS3900, BTS3900 MOD CELLMLB
CellMLB UE Number
NumThd LTE LST CELLMLB
Threshold
 Inter-RAT Idle MLB
InterRatIdleMlbUeN BTS3900, BTS3900 MOD CELLMLB
CellMLB UE Number
umThd LTE LST CELLMLB
Threshold
 Inter-frequency
InterFreqLoadEvalP BTS3900, BTS3900 MOD CELLMLB
CellMLB Load Evaluate
rd LTE LST CELLMLB
Period
 InterRatLoadEvalPr Inter-Rat Load BTS3900, BTS3900 MOD CELLMLB
CellMLB
d Evaluate Period LTE LST CELLMLB
 Load Balancing
BTS3900, BTS3900 MOD CELLMLB
CellMLB FreqSelectStrategy Frequency Select
LTE LST CELLMLB
Strategy
 Load Balancing
LoadBalanceNCell BTS3900, BTS3900 MOD CELLMLB
CellMLB Neighbor Cell
Scope LTE LST CELLMLB
Scope
 InterRatMlbUeNum Inter-RAT Mlb UE BTS3900, BTS3900 MOD CELLMLB
CellMLB
Offset Number Offset LTE LST CELLMLB
 IdleUeSelFreqScop Idle UE Select BTS3900, BTS3900 MOD CELLMLB
CellMLB
e Frequency Scope LTE LST CELLMLB
 InterRatMlbUeSelSt InterRAT MLB UE BTS3900, BTS3900 MOD CELLMLB
CellMLB
rategy Select Strategy LTE LST CELLMLB
 InterRAT MLB UE
InterRatMlbUeSelPr BTS3900, BTS3900 MOD CELLMLB
CellMLB Select PRB
bThd LTE LST CELLMLB
Threshold
 PrbLoadCalcMetho Prb Load BTS3900, BTS3900 MOD CELLMLB
CellMLB
d Calculation Method LTE LST CELLMLB
 MlbUeSelectPunish MLB UE Selection BTS3900, BTS3900 MOD CELLMLB
CellMLB
Timer Punish Timer LTE LST CELLMLB
 MlbHoCellSelectStr Mlb Ho Cell select BTS3900, BTS3900 MOD CELLMLB
CellMLB
ategy Strategy LTE LST CELLMLB
 InterRatMlbTrigger InterRAT MLB BTS3900, BTS3900 MOD CELLMLB
CellMLB
Mode Trigger Mode LTE LST CELLMLB
 InterRAT MLB UE
InterRatMlbUeNum BTS3900, BTS3900 MOD CELLMLB
CellMLB Number Mode
ModeThd LTE LST CELLMLB
Threshold

Number of Periods
PunishJudgePrdNu BTS3900, BTS3900 MOD CELLMLB
CellMLB for Punishment
m LTE LST CELLMLB
Judgement
 Number of Periods
BTS3900, BTS3900 MOD CELLMLB
CellMLB FreqPunishPrdNum for Punishment on
LTE LST CELLMLB
Frequency

Number of Periods
BTS3900, BTS3900 MOD CELLMLB
CellMLB CellPunishPrdNum for Punishment on
LTE LST CELLMLB
Cell

BTS3900, BTS3900 MOD CELLMLB

CellMLB MultiRruMode Multiple RRU Mode
LTE LST CELLMLB
 InterFreqOffloadOff Inter-Freq Offload BTS3900, BTS3900 MOD CELLMLB
CellMLB
set Offset LTE LST CELLMLB
 Inter-Freq UE
InterFrqUeNumOffl BTS3900, BTS3900 MOD CELLMLB
CellMLB Number Offload
oadOffset LTE LST CELLMLB
Offset
 CellCapacityScaleF Cell Capacity Scale BTS3900, BTS3900 MOD CELLMLB
CellMLB
actor Factor LTE LST CELLMLB
 Inter-RAT MLB
InterRatMlbMaxUe Maximum BTS3900, BTS3900 MOD CELLMLB
CellMLB
Num Transferred UE LTE LST CELLMLB
Number
 Inter-RAT MLB
InterRatMlbHoFailP BTS3900, BTS3900 MOD CELLMLB
CellMLB Handover Failure
unish LTE LST CELLMLB
Punish
 EutranLoadJudgeSt EUTRAN Load BTS3900, BTS3900 MOD CELLMLB
CellMLB
rategy Judge Strategy LTE LST CELLMLB

MLB Trigger Judge BTS3900, BTS3900 MOD CELLMLB

CellMLB MlbTrigJudgePeriod
Period LTE LST CELLMLB
 InterFreqMlbStrateg Inter-Freq MLB BTS3900, BTS3900 MOD CELLMLB
CellMLB
y Strategy LTE LST CELLMLB

LST
CELLMLBAUTOGR
BTS3900, BTS3900 OUP
CellMlbAutoGroup LocalCellId Local cell ID
LTE MOD
CELLMLBAUTOGR
OUP
 MOD
CELLMLBAUTOGR
Overlap Indicator BTS3900, BTS3900 OUP
CellMlbAutoGroup OverlapIndAddThd
Addition Threshold LTE LST
CELLMLBAUTOGR
OUP
 MOD
CELLMLBAUTOGR
Overlap Indicator BTS3900, BTS3900 OUP
CellMlbAutoGroup OverlapIndDelThd
Deletion Threshold LTE LST
CELLMLBAUTOGR
OUP
 MOD
CELLMLBAUTOGR
BTS3900, BTS3900 OUP
CellMlbAutoGroup StatPeriod Statistic Period
LTE LST
CELLMLBAUTOGR
OUP

MOD
CELLMLBAUTOGR
BTS3900, BTS3900 OUP
CellMlbAutoGroup SleepPeriod Sleep Period
LTE LST
CELLMLBAUTOGR
OUP
 MOD
CELLMLBAUTOGR
Additional
BTS3900, BTS3900 OUP
CellMlbAutoGroup AddedMeasCfg Measurement
LTE LST
Configuration
CELLMLBAUTOGR
OUP

MOD
CELLMLBAUTOGR
Overlap Indicator
OverlapIndAutoSa BTS3900, BTS3900 OUP
CellMlbAutoGroup Auto Sample
mpleNum LTE LST
Number
CELLMLBAUTOGR
OUP
 MOD
CELLMLBAUTOGR
BTS3900, BTS3900 OUP
CellMlbAutoGroup OptMode Optimization Mode
LTE LST
CELLMLBAUTOGR
OUP

LST
BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg LocalCellId Local cell ID
LTE MOD
CELLUSPARACFG
 MOD
Us Guarantee BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsAlgoSwitch
Algorithm Switch LTE LST
CELLUSPARACFG

MOD
US VoIP Minimal
UsVoIPPreAllocMin BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg Period of
Period LTE LST
Preallocationn
CELLUSPARACFG
 MOD
US Data Minimal
UsDataPreAllocMin BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg Period of
Period LTE LST
Preallocationn
CELLUSPARACFG

MOD
US VoIP Packet
UsVoIPPreAllocSiz BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg Size of
e LTE LST
Preallocation
CELLUSPARACFG

MOD
US Data Packet
UsDataPreAllocSiz BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg Size of
e LTE LST
Preallocation
CELLUSPARACFG
 MOD
US VoIP Smart
UsVoIPSmartPreall BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg Preallocation
ocDura LTE LST
Duration
CELLUSPARACFG

MOD
US Data Smart
UsDataSmartPreall BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg Preallocation
ocDura LTE LST
Duration
CELLUSPARACFG
 MOD
UlUsVoIPIblerTarge US Ul VoIP Ibler BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg
t Target LTE LST
CELLUSPARACFG

MOD
NS Number Thd
NsNumThdForUsH BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg Based on US
o LTE LST
Handover
CELLUSPARACFG

MOD
UsPucchSinrTarget US PUCCH SINR BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg
Offset Target Offset LTE LST
CELLUSPARACFG
 MOD
US PUCCH RSRP
UsPucchRsrpHighT BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg High Threshold
hdOffset LTE LST
Offset
CELLUSPARACFG

MOD
UsDataRatFreqPriG US Data Rat Freq BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg
roupId Priority Group ID LTE LST
CELLUSPARACFG

MOD
UsGuaranteeDurTi US Guarantee BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg
mer Duration Timer LTE LST
CELLUSPARACFG

MOD
US Gap
UsGapMeasuremen BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg Measurement
tPeriod LTE LST
Period
CELLUSPARACFG
 MOD
US A2 RSRP BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsHoA2ThdRsrp
Threshold LTE LST
CELLUSPARACFG

MOD
US A2 RSRQ BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsHoA2ThdRsrq
Threshold LTE LST
CELLUSPARACFG

MOD
UsVoIPRatFreqPriG US VoIP Rat Freq BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg
roupId Priority Group ID LTE LST
CELLUSPARACFG

MOD
NsRatFreqPriGroup NS Rat Freq Priority BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg
Id Group ID LTE LST
CELLUSPARACFG
 MOD
Unlimited Service BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsPaPcOff
PA LTE LST
CELLUSPARACFG

MOD
US PUSCH SINR
UsPuschSinrHighT BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg High Threshold
hdOffset LTE LST
Offset
CELLUSPARACFG
 MOD
NS User RB BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg NsRbRestrictRatio
Restrict Ratio LTE LST
CELLUSPARACFG

MOD
US User Detect BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsDetectTimer
Timer LTE LST
CELLUSPARACFG
 MOD
Unlimited Service BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsDlMinGbr
Downlink MinGBR LTE LST
CELLUSPARACFG
 MOD
Unlimited Service BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsUlMinGbr
Uplink MinGBR LTE LST
CELLUSPARACFG

MOD
US Neighbor BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsNbInterfCtrl
Interference Control LTE LST
CELLUSPARACFG
 MOD
UlUsVoipRsvStartR UL US VoIP BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg
b Reserved Start RB LTE LST
CELLUSPARACFG
 MOD
UL US VoIP BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UlUsVoipRsvEndRb
Reserved End RB LTE LST
CELLUSPARACFG

MOD
PRB Threshold of BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg SfCtrlPrbThd
Subframe Control LTE LST
CELLUSPARACFG

MOD
US VoIP Keep On BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsVoIPKeepOnLen
Length LTE LST
CELLUSPARACFG
 MOD
NS Idle Rat
NsIdleRatFreqPriGr BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg Frequency Priority
oupId LTE LST
Group ID
CELLUSPARACFG

MOD
US Downlink
BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsDlPriorityRatio Scheduling Priority
LTE LST
Ratio
CELLUSPARACFG
 MOD
US Uplink
BTS3900, BTS3900 CELLUSPARACFG
CellUSParaCfg UsUlPriorityRatio Scheduling Priority
LTE LST
Ratio
CELLUSPARACFG

LST
BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo LocalCellId Local cell ID
LTE MOD
CELLPDCCHALGO

MOD
SignalCongregateL BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo ComSigCongregLv
evel LTE LST
CELLPDCCHALGO
 MOD
Cce Ratio Adjust BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo CceRatioAdjSwitch
Switch LTE LST
CELLPDCCHALGO

MOD
SFN Pdcch DCS BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo SfnPdcchDcsThd
Threshold LTE LST
CELLPDCCHALGO
 MOD
PDCCH Initial BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo InitPdcchSymNum
Symbol Number LTE LST
CELLPDCCHALGO
 MOD
PDCCH Virtual BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo VirtualLoadPro
Loading Proportion LTE LST
CELLPDCCHALGO
 MOD
PDCCH Symbol
PdcchSymNumSwit BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo Number Adjust
ch LTE LST
Switch
CELLPDCCHALGO
 MOD
BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo CceUseRatio CCE use ratio
LTE LST
CELLPDCCHALGO

MOD
PDCCH
PdcchAggLvlCLAdj BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo Aggregation Level
ustSwitch LTE LST
CL Switch
CELLPDCCHALGO
 MOD
DPDVirtualLoadSwi DPD Virtual Load BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo
tch Switch LTE LST
CELLPDCCHALGO

MOD
DPDVirtualLoadTyp DPD Virtual Load BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo
e Type LTE LST
CELLPDCCHALGO
 MOD
Aggregation Level
AggLvlSelStrageFo BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo Strategy for Dual
rDualCW LTE LST
Codewords
CELLPDCCHALGO
 MOD
PdcchCapacityImpr PDCCH Capacity BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo
oveSwitch Improve Switch LTE LST
CELLPDCCHALGO

MOD
PdcchMaxCodeRat PDCCH Max Code BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo
e Rate LTE LST
CELLPDCCHALGO
 Uplink and MOD
ULDLPdcchSymNu Downlink PDCCH BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo
m Symbols LTE LST
Configuration CELLPDCCHALGO
 The Strategy Of MOD
PDCCHAggLvlAdap PDCCH BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo
tStrage Aggregation Level LTE LST
Adaptation CELLPDCCHALGO
 MOD
Hysteresis for CFI
HysForCfiBasedPre BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo increase based on
Sch LTE LST
PreSch
CELLPDCCHALGO
 MOD
SFN PDCCH SDMA BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo SfnPdcchSdmaThd
Threshold LTE LST
CELLPDCCHALGO
 MOD
UlPdcchAllocImprov UL PDCCH Alloc BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo
eSwitch Improve Switch LTE LST
CELLPDCCHALGO
 MOD
CCE Max Initial BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo CceMaxInitialRatio
Ratio LTE LST
CELLPDCCHALGO
 MOD
PdcchPowerEnhan PDCCH Power BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo
cedSwitch Enhanced Switch LTE LST
CELLPDCCHALGO

MOD
PDCCH BLER BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo PdcchBlerTarget
Target LTE LST
CELLPDCCHALGO
 HL Net Access MOD
HLNetAccSigAggLv Signal Aggregation BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo
lSelEnhSw Lvl Select Enhance LTE LST
Switch CELLPDCCHALGO
 MOD
EPDCCH Algorithm BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo EpdcchAlgoSwitch
Switch LTE LST
CELLPDCCHALGO

MOD
CCE Usage
CceThdtoEnableEp BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo Threshold To
dcch LTE LST
Enable EPDCCH
CELLPDCCHALGO
 MOD
RB Usage
RbThdtoEnableEpd BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo Threshold To
cch LTE LST
Enable EPDCCH
CELLPDCCHALGO

MOD
CCE Usage
CceThdtoDisableEp BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo Threshold To
dcch LTE LST
Disable EPDCCH
CELLPDCCHALGO

MOD
ECCE Usage
EcceThdtoDisableE BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo Threshold To
pdcch LTE LST
Disable EPDCCH
CELLPDCCHALGO
 MOD
RB Usage
RbThdtoDisableEp BTS3900, BTS3900 CELLPDCCHALGO
CellPdcchAlgo Threshold To
dcch LTE LST
Disable EPDCCH
CELLPDCCHALGO

LST
BTS3900, BTS3900 CELLPUCCHALGO
CellPucchAlgo LocalCellId Local cell ID
LTE MOD
CELLPUCCHALGO
 MOD
SRI Low Load BTS3900, BTS3900 CELLPUCCHALGO
CellPucchAlgo SriLowLoadThd
Threshold LTE LST
CELLPUCCHALGO
 MOD
SRI
BTS3900, BTS3900 CELLPUCCHALGO
CellPucchAlgo SriReCfgInd Reconfiguration
LTE LST
Indicator
CELLPUCCHALGO
 MOD
SRI Algorithm BTS3900, BTS3900 CELLPUCCHALGO
CellPucchAlgo SriAlgoSwitch
Switch LTE LST
CELLPUCCHALGO

LST
CELLCOUNTERPA
CellCounterParaGr BTS3900, BTS3900 RAGROUP
LocalCellId Local cell ID
oup LTE MOD
CELLCOUNTERPA
RAGROUP
 MOD
CELLCOUNTERPA
Cell User Number
CellCounterParaGr CellUserNumPdfTh BTS3900, BTS3900 RAGROUP
PDF Counter
oup d LTE LST
Threshold
CELLCOUNTERPA
RAGROUP
 MOD
CELLCOUNTERPA
CellCounterParaGr Uplink Ibler BTS3900, BTS3900 RAGROUP
UlIblerOptSwitch
oup Optimization Switch LTE LST
CELLCOUNTERPA
RAGROUP
 MOD
CELLCOUNTERPA
CellCounterParaGr CellCounterAlgoSwi Cell Counter BTS3900, BTS3900 RAGROUP
oup tch Algorithm Switch LTE LST
CELLCOUNTERPA
RAGROUP

MOD
CELLCOUNTERPA
Edge User
CellCounterParaGr BTS3900, BTS3900 RAGROUP
EdgeUserA3Offset Distinguish A3
oup LTE LST
Offset
CELLCOUNTERPA
RAGROUP
 MOD
Downlink CELLCOUNTERPA
CellCounterParaGr Throughput PDF BTS3900, BTS3900 RAGROUP
DlThrpPdfThd0
oup Counter Threshold LTE LST
0 CELLCOUNTERPA
RAGROUP

MOD
Downlink CELLCOUNTERPA
CellCounterParaGr Throughput PDF BTS3900, BTS3900 RAGROUP
DlThrpPdfThd1
oup Counter Threshold LTE LST
1 CELLCOUNTERPA
RAGROUP
 MOD
Downlink CELLCOUNTERPA
CellCounterParaGr Throughput PDF BTS3900, BTS3900 RAGROUP
DlThrpPdfThd2
oup Counter Threshold LTE LST
2 CELLCOUNTERPA
RAGROUP

MOD
Downlink CELLCOUNTERPA
CellCounterParaGr Throughput PDF BTS3900, BTS3900 RAGROUP
DlThrpPdfThd3
oup Counter Threshold LTE LST
3 CELLCOUNTERPA
RAGROUP
 MOD
Downlink CELLCOUNTERPA
CellCounterParaGr Throughput PDF BTS3900, BTS3900 RAGROUP
DlThrpPdfThd4
oup Counter Threshold LTE LST
4 CELLCOUNTERPA
RAGROUP

MOD
Downlink CELLCOUNTERPA
CellCounterParaGr Throughput PDF BTS3900, BTS3900 RAGROUP
DlThrpPdfThd5
oup Counter Threshold LTE LST
5 CELLCOUNTERPA
RAGROUP
 MOD
Downlink CELLCOUNTERPA
CellCounterParaGr Throughput PDF BTS3900, BTS3900 RAGROUP
DlThrpPdfThd6
oup Counter Threshold LTE LST
6 CELLCOUNTERPA
RAGROUP

MOD
Downlink CELLCOUNTERPA
CellCounterParaGr Throughput PDF BTS3900, BTS3900 RAGROUP
DlThrpPdfThd7
oup Counter Threshold LTE LST
7 CELLCOUNTERPA
RAGROUP
 MOD
Downlink CELLCOUNTERPA
CellCounterParaGr Throughput PDF BTS3900, BTS3900 RAGROUP
DlThrpPdfThd8
oup Counter Threshold LTE LST
8 CELLCOUNTERPA
RAGROUP

MOD
CELLCOUNTERPA
Uplink Throughput
CellCounterParaGr BTS3900, BTS3900 RAGROUP
UlThrpPdfThd0 PDF Counter
oup LTE LST
Threshold 0
CELLCOUNTERPA
RAGROUP
 MOD
CELLCOUNTERPA
Uplink Throughput
CellCounterParaGr BTS3900, BTS3900 RAGROUP
UlThrpPdfThd1 PDF Counter
oup LTE LST
Threshold 1
CELLCOUNTERPA
RAGROUP

MOD
CELLCOUNTERPA
Uplink Throughput
CellCounterParaGr BTS3900, BTS3900 RAGROUP
UlThrpPdfThd2 PDF Counter
oup LTE LST
Threshold 2
CELLCOUNTERPA
RAGROUP
 MOD
CELLCOUNTERPA
Uplink Throughput
CellCounterParaGr BTS3900, BTS3900 RAGROUP
UlThrpPdfThd3 PDF Counter
oup LTE LST
Threshold 3
CELLCOUNTERPA
RAGROUP

MOD
CELLCOUNTERPA
Uplink Throughput
CellCounterParaGr BTS3900, BTS3900 RAGROUP
UlThrpPdfThd4 PDF Counter
oup LTE LST
Threshold 4
CELLCOUNTERPA
RAGROUP
 MOD
CELLCOUNTERPA
Uplink Throughput
CellCounterParaGr BTS3900, BTS3900 RAGROUP
UlThrpPdfThd5 PDF Counter
oup LTE LST
Threshold 5
CELLCOUNTERPA
RAGROUP

MOD
CELLCOUNTERPA
Uplink Throughput
CellCounterParaGr BTS3900, BTS3900 RAGROUP
UlThrpPdfThd6 PDF Counter
oup LTE LST
Threshold 6
CELLCOUNTERPA
RAGROUP
 MOD
CELLCOUNTERPA
Uplink Throughput
CellCounterParaGr BTS3900, BTS3900 RAGROUP
UlThrpPdfThd7 PDF Counter
oup LTE LST
Threshold 7
CELLCOUNTERPA
RAGROUP

MOD
CELLCOUNTERPA
Uplink Throughput
CellCounterParaGr BTS3900, BTS3900 RAGROUP
UlThrpPdfThd8 PDF Counter
oup LTE LST
Threshold 8
CELLCOUNTERPA
RAGROUP
 MOD
CELLCOUNTERPA
CellCounterParaGr UeAbnormalJudgeT Ue Abnormal Judge BTS3900, BTS3900 RAGROUP
oup hd Thd LTE LST
CELLCOUNTERPA
RAGROUP

TddCellFrameOffse BTS3900, BTS3900

LocalCellId Local cell ID None
t LTE
TddCellFrameOffse BTS3900, BTS3900
FrameOffsetMode Frame Offset Mode None
t LTE

TddCellFrameOffse BTS3900, BTS3900

CellFrameOffset Cell Frame Offset None
t LTE

LST
CELLNOACCESSA
CellNoAccessAlmP BTS3900, BTS3900 LMPARA
LocalCellId Local cell ID
ara LTE MOD
CELLNOACCESSA
LMPARA
 MOD
CELLNOACCESSA
CellNoAccessAlmP NoAccessStartDete No access detect BTS3900, BTS3900 LMPARA
ara ctTime start time LTE LST
CELLNOACCESSA
LMPARA

MOD
CELLNOACCESSA
CellNoAccessAlmP NoAccessStopDete No access detect BTS3900, BTS3900 LMPARA
ara ctTime stop time LTE LST
CELLNOACCESSA
LMPARA
 MOD
CELLNOACCESSA
CellNoAccessAlmP NoAccessDetectTi No access detect BTS3900, BTS3900 LMPARA
ara mer timer LTE LST
CELLNOACCESSA
LMPARA

BTS3900, BTS3900 LST CELLULICIC

CellUlIcic LocalCellId Local cell ID
LTE MOD CELLULICIC

Uplink band division BTS3900, BTS3900 MOD CELLULICIC

CellUlIcic BandMode
scheme LTE LST CELLULICIC

LST
GERANINTERFCF
BTS3900, BTS3900 G
GeranInterfCfg LocalCellId Local cell ID
LTE MOD
GERANINTERFCF
G
 MOD
GERANINTERFCF
Number of DL RBs
DlGeranIntefRbNu BTS3900, BTS3900 G
GeranInterfCfg interfered by
m LTE LST
GERAN
GERANINTERFCF
G

MOD
GERANINTERFCF
SINR threshold for BTS3900, BTS3900 G
GeranInterfCfg DlRbAvailSinrThd
available DL RBs LTE LST
GERANINTERFCF
G
 ADD
CELLRELAYALGO
PARA
LST
CELLRELAYALGO
BTS3900, BTS3900 PARA
CellRelayAlgoPara LocalCellId Local cell ID
LTE MOD
CELLRELAYALGO
PARA
RMV
CELLRELAYALGO
PARA

ADD
CELLRELAYALGO
PARA
MOD
UlRelaySubframeR Uplink Relay BTS3900, BTS3900
CellRelayAlgoPara CELLRELAYALGO
atio Subframe Ratio LTE
PARA
LST
CELLRELAYALGO
PARA
 ADD
CELLRELAYALGO
PARA
MOD
DlRelaySubframeR Downlink Relay BTS3900, BTS3900
CellRelayAlgoPara CELLRELAYALGO
atio Subframe Ratio LTE
PARA
LST
CELLRELAYALGO
PARA

ADD
CELLRELAYALGO
PARA
MOD
RrnPreAllocationMi Rrn Pre-Allocation BTS3900, BTS3900
CellRelayAlgoPara CELLRELAYALGO
nPeriod Minimum Period LTE
PARA
LST
CELLRELAYALGO
PARA
 ADD
CELLRELAYALGO
PARA
MOD
RrnPreAllocationSiz Rrn Pre-Allocation BTS3900, BTS3900
CellRelayAlgoPara CELLRELAYALGO
e Size LTE
PARA
LST
CELLRELAYALGO
PARA

ADD
CELLRELAYALGO
PARA
Uplink SINR MOD
BTS3900, BTS3900
CellRelayAlgoPara UlSinrAdjTargetIbler Adjustment Target CELLRELAYALGO
LTE
IBLER PARA
LST
CELLRELAYALGO
PARA

ADD
CELLRELAYALGO
PARA
Downlink SINR MOD
BTS3900, BTS3900
CellRelayAlgoPara DlSinrAdjTargetIbler Adjustment Target CELLRELAYALGO
LTE
IBLER PARA
LST
CELLRELAYALGO
PARA
 ADD
CELLRELAYALGO
PARA
Uplink Enhanced MOD
UlEnhancedRelayS BTS3900, BTS3900
CellRelayAlgoPara Relay Schedule CELLRELAYALGO
chSw LTE
Switch PARA
LST
CELLRELAYALGO
PARA

ADD
CELLRELAYALGO
PARA
Downlink Enhanced MOD
DlEnhancedRelayS BTS3900, BTS3900
CellRelayAlgoPara Relay Schedule CELLRELAYALGO
chSw LTE
Switch PARA
LST
CELLRELAYALGO
PARA

ADD
CELLSIMULOAD
DSP
CELLSIMULOAD
BTS3900, BTS3900 LST
CellSimuLoad LocalCellId Local cell ID
LTE CELLSIMULOAD
MOD
CELLSIMULOAD
RMV
CELLSIMULOAD
 ADD
CELLSIMULOAD
BTS3900, BTS3900 MOD
CellSimuLoad SimLoadCfgIndex Configure Index
LTE CELLSIMULOAD
LST
CELLSIMULOAD
 ADD
CELLSIMULOAD
SimuLoadTransMo SimuLoad BTS3900, BTS3900 MOD
CellSimuLoad
de transmission mode LTE CELLSIMULOAD
LST
CELLSIMULOAD

ADD
CELLSIMULOAD
BTS3900, BTS3900 MOD
CellSimuLoad SimuloadPMI Simuload PMI
LTE CELLSIMULOAD
LST
CELLSIMULOAD
 ADD
CELLSIMULOAD
Cell Simuload
BTS3900, BTS3900 MOD
CellSimuLoad AutoRmvTime Automatic Remove
LTE CELLSIMULOAD
Remain Time
LST
CELLSIMULOAD

SimuLoad allocated BTS3900, BTS3900 DSP

CellSimuLoad SimuLoadRbNum
RB Number LTE CELLSIMULOAD

Commercial service BTS3900, BTS3900 DSP

CellSimuLoad CommercRbNum
RB number LTE CELLSIMULOAD

SimuLoad allocated BTS3900, BTS3900 DSP

CellSimuLoad SimuLoadPower
power LTE CELLSIMULOAD

Commercial service BTS3900, BTS3900 DSP

CellSimuLoad CommercPower
power LTE CELLSIMULOAD

SimuLoad allocated BTS3900, BTS3900 DSP

CellSimuLoad SimuLoadUserNum
user Number LTE CELLSIMULOAD

Commercial service BTS3900, BTS3900 DSP

CellSimuLoad CommercUserNum
user number LTE CELLSIMULOAD
 Cell Simuload
AutoRmvRemainTi BTS3900, BTS3900 DSP
CellSimuLoad Automatic Remove
me LTE CELLSIMULOAD
Remain Time

ADD
SFNEDGERRUREL
ATION
DSP
SFNEDGERRUREL
ATION
LST
SfnEdgeRruRelatio BTS3900, BTS3900
LocalCellId Local Cell ID SFNEDGERRUREL
n LTE
ATION
MOD
SFNEDGERRUREL
ATION
RMV
SFNEDGERRUREL
ATION

ADD
SFNEDGERRUREL
ATION
LST
SFNEDGERRUREL
ATION
MOD
SfnEdgeRruRelatio Sector Equipment BTS3900, BTS3900
SectorEqmId SFNEDGERRUREL
n ID LTE
ATION
RMV
SFNEDGERRUREL
ATION
DSP
SFNEDGERRUREL
ATION

ADD
SFNEDGERRUREL
ATION
MOD
SFNEDGERRUREL
SfnEdgeRruRelatio Mobile Country BTS3900, BTS3900 ATION
Mcc
n Code LTE DSP
SFNEDGERRUREL
ATION
LST
SFNEDGERRUREL
ATION
 ADD
SFNEDGERRUREL
ATION
MOD
SFNEDGERRUREL
SfnEdgeRruRelatio Mobile Network BTS3900, BTS3900 ATION
Mnc
n Code LTE DSP
SFNEDGERRUREL
ATION
LST
SFNEDGERRUREL
ATION

ADD
SFNEDGERRUREL
ATION
MOD
SFNEDGERRUREL
SfnEdgeRruRelatio BTS3900, BTS3900 ATION
eNodeBId eNodeB ID
n LTE DSP
SFNEDGERRUREL
ATION
LST
SFNEDGERRUREL
ATION

ADD
SFNEDGERRUREL
ATION
MOD
SFNEDGERRUREL
SfnEdgeRruRelatio BTS3900, BTS3900 ATION
NeighborCellId Neighbor Cell ID
n LTE DSP
SFNEDGERRUREL
ATION
LST
SFNEDGERRUREL
ATION

ADD
SFNEDGERRUREL
ATION
MOD
SFNEDGERRUREL
SfnEdgeRruRelatio NeighborSectorEq Neighbor Sector BTS3900, BTS3900 ATION
n mId Equipment ID LTE DSP
SFNEDGERRUREL
ATION
LST
SFNEDGERRUREL
ATION
 BTS3900, BTS3900 LST BCCHCFG
BcchCfg LocalCellId Local cell ID
LTE MOD BCCHCFG

Modification period BTS3900, BTS3900 MOD BCCHCFG

BcchCfg ModifyPeriodCoeff
coefficient LTE LST BCCHCFG

LST
BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg LocalCellId Local cell ID
LTE MOD
CELLCHPWRCFG
 MOD
BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg PcfichPwr PCFICH power
LTE LST
CELLCHPWRCFG
 MOD
BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg PbchPwr PBCH power
LTE LST
CELLCHPWRCFG
 MOD
BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg SchPwr SCH power
LTE LST
CELLCHPWRCFG
 MOD
BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg DbchPwr DBCH power
LTE LST
CELLCHPWRCFG
 MOD
BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg PchPwr PCH power
LTE LST
CELLCHPWRCFG
 MOD
Rach response BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg RaRspPwr
power LTE LST
CELLCHPWRCFG
 MOD
BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg PrsPwr Prs power
LTE LST
CELLCHPWRCFG

MOD
Antenna Output BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg AntOutputPwr
Power LTE LST
CELLCHPWRCFG
 MOD
PMCH Power BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg PmchPwrOffset
Offset LTE LST
CELLCHPWRCFG

MOD
Handover RAR
HoRarPwrEnhance BTS3900, BTS3900 CELLCHPWRCFG
CellChPwrCfg Power Enhanced
dSwitch LTE LST
Switch
CELLCHPWRCFG
 BTS3900, BTS3900 LST PDSCHCFG
PDSCHCfg LocalCellId Local cell ID
LTE MOD PDSCHCFG

ReferenceSignalPw Reference signal BTS3900, BTS3900 MOD PDSCHCFG

PDSCHCfg
r power LTE LST PDSCHCFG
 BTS3900, BTS3900 MOD PDSCHCFG
PDSCHCfg Pb PB
LTE LST PDSCHCFG

ReferenceSignalPw Reference Signal BTS3900, BTS3900 MOD PDSCHCFG

PDSCHCfg
rMargin Power Margin LTE LST PDSCHCFG

DSP RACHCFG
BTS3900, BTS3900
RACHCfg LocalCellId Local cell ID LST RACHCFG
LTE
MOD RACHCFG
 BTS3900, BTS3900 MOD RACHCFG
RACHCfg PwrRampingStep Power ramping step
LTE LST RACHCFG

Preamble initial
PreambInitRcvTarg BTS3900, BTS3900 MOD RACHCFG
RACHCfg received target
etPwr LTE LST RACHCFG
power
 ZeroCorrelationZon Zero correlation BTS3900, BTS3900
RACHCfg DSP RACHCFG
eConf zone config LTE

MessageSizeGroup Message size of BTS3900, BTS3900 MOD RACHCFG

RACHCfg
A select group A LTE LST RACHCFG

PRACH Frequency BTS3900, BTS3900 MOD RACHCFG

RACHCfg PrachFreqOffset
Offset LTE LST RACHCFG
 Indication of
PrachConfigIndexC BTS3900, BTS3900 MOD RACHCFG
RACHCfg PRACH
fgInd LTE LST RACHCFG
Configuration Index

PRACH BTS3900, BTS3900 MOD RACHCFG

RACHCfg PrachConfigIndex
Configuration Index LTE LST RACHCFG
 Maximum number
BTS3900, BTS3900 MOD RACHCFG
RACHCfg PreambleTransMax of preamble
LTE LST RACHCFG
transmission

ContentionResoluti Timer for contention BTS3900, BTS3900 MOD RACHCFG

RACHCfg
onTimer resolution LTE LST RACHCFG
 Maximum number
BTS3900, BTS3900 MOD RACHCFG
RACHCfg MaxHarqMsg3Tx of Msg3 HARQ
LTE LST RACHCFG
transmissions

RandomPreambleR Random Preamble BTS3900, BTS3900 MOD RACHCFG

RACHCfg
atio Ratio LTE LST RACHCFG
 Random Access
RaPreambleGrpAR BTS3900, BTS3900 MOD RACHCFG
RACHCfg preamble Group A
atio LTE LST RACHCFG
Ratio

DSP SRSCFG
BTS3900, BTS3900
SRSCfg LocalCellId Local cell ID LST SRSCFG
LTE
MOD SRSCFG
 SRS subframe BTS3900, BTS3900 MOD SRSCFG
SRSCfg SrsSubframeCfg
configuration LTE LST SRSCFG
 SRS ACK/NACK
BTS3900, BTS3900 MOD SRSCFG
SRSCfg AnSrsSimuTrans simultaneous
LTE LST SRSCFG
transmission
 SRS Configuration BTS3900, BTS3900 MOD SRSCFG
SRSCfg SrsCfgInd
Indicator LTE LST SRSCFG
 TDD SRS BTS3900, BTS3900 MOD SRSCFG
SRSCfg TddSrsCfgMode
Configuration Mode LTE LST SRSCFG
 FDD SRS BTS3900, BTS3900 MOD SRSCFG
SRSCfg FddSrsCfgMode
Configuration Mode LTE LST SRSCFG
 SRS Algorithm BTS3900, BTS3900 MOD SRSCFG
SRSCfg SrsAlgoOptSwitch
Optimization Switch LTE LST SRSCFG

CellSrsBandwidthCf Cell srs bandwidth BTS3900, BTS3900

SRSCfg DSP SRSCFG
g configuration LTE

BTS3900, BTS3900 LST PHICHCFG

PHICHCfg LocalCellId Local cell ID
LTE MOD PHICHCFG
 BTS3900, BTS3900 MOD PHICHCFG
PHICHCfg PhichDuration PHICH duration
LTE LST PHICHCFG

BTS3900, BTS3900 MOD PHICHCFG

PHICHCfg PhichResource PHICH resource
LTE LST PHICHCFG

BTS3900, BTS3900 LST PCCHCFG

PCCHCfg LocalCellId Local cell ID
LTE MOD PCCHCFG
 Default paging BTS3900, BTS3900 MOD PCCHCFG
PCCHCfg DefaultPagingCycle
cycle LTE LST PCCHCFG

BTS3900, BTS3900 MOD PCCHCFG

PCCHCfg Nb NB
LTE LST PCCHCFG
 Paging Sent BTS3900, BTS3900 MOD PCCHCFG
PCCHCfg PagingSentNum
Number LTE LST PCCHCFG
 MaxPagingRecords Maximum Number BTS3900, BTS3900 MOD PCCHCFG
PCCHCfg
Num of Paging Records LTE LST PCCHCFG
 Paging Message BTS3900, BTS3900 MOD PCCHCFG
PCCHCfg PagingStrategy
Sending Strategy LTE LST PCCHCFG

BTS3900, BTS3900 LST PUSCHCFG

PUSCHCfg LocalCellId Local cell ID
LTE MOD PUSCHCFG
 BTS3900, BTS3900 MOD PUSCHCFG
PUSCHCfg Nsb Subband number
LTE LST PUSCHCFG

BTS3900, BTS3900 MOD PUSCHCFG

PUSCHCfg HoppingMode Hopping mode
LTE LST PUSCHCFG
 BTS3900, BTS3900 MOD PUSCHCFG
PUSCHCfg HoppingOffset Hopping offset
LTE LST PUSCHCFG
 GroupHoppingEnab Group hopping BTS3900, BTS3900 MOD PUSCHCFG
PUSCHCfg
led enabled LTE LST PUSCHCFG
 GroupAssignPUSC Group assignment BTS3900, BTS3900 MOD PUSCHCFG
PUSCHCfg
H PUSCH LTE LST PUSCHCFG
 SeqHoppingEnable Sequence hopping BTS3900, BTS3900 MOD PUSCHCFG
PUSCHCfg
d enabled LTE LST PUSCHCFG

BTS3900, BTS3900 MOD PUSCHCFG

PUSCHCfg CyclicShift Cyclic shift
LTE LST PUSCHCFG
 BTS3900, BTS3900 MOD PUSCHCFG
PUSCHCfg Qam64Enabled Qam64 enabled
LTE LST PUSCHCFG

R12 UL 64QAM BTS3900, BTS3900 MOD PUSCHCFG

PUSCHCfg R12Qam64Enabled
Enabled LTE LST PUSCHCFG

DSP PUCCHCFG
BTS3900, BTS3900
PUCCHCfg LocalCellId Local cell ID LST PUCCHCFG
LTE
MOD PUCCHCFG
 BTS3900, BTS3900 MOD PUCCHCFG
PUCCHCfg DeltaShift Delta shift
LTE LST PUCCHCFG

ACK/SRI Channel BTS3900, BTS3900 MOD PUCCHCFG

PUCCHCfg NaSriChNum
Number LTE LST PUCCHCFG
 BTS3900, BTS3900 MOD PUCCHCFG
PUCCHCfg CqiRbNum CQI RB number
LTE LST PUCCHCFG

PucchExtendedRB PUCCH Extended BTS3900, BTS3900 MOD PUCCHCFG

PUCCHCfg
Num RB Number LTE LST PUCCHCFG

Semi-persistent
BTS3900, BTS3900
PUCCHCfg N1PucchAn ACK and SRI Sub DSP PUCCHCFG
LTE
Channel
 Format1ChAllocMo Format1 Channel BTS3900, BTS3900 MOD PUCCHCFG
PUCCHCfg
de Allocation Mode LTE LST PUCCHCFG
 SRI Period BTS3900, BTS3900 MOD PUCCHCFG
PUCCHCfg SriPeriodAdaptive
Adaptive Switch LTE LST PUCCHCFG

Format2ChAllocMo Format2 Channel BTS3900, BTS3900 MOD PUCCHCFG

PUCCHCfg
de Allocation Mode LTE LST PUCCHCFG
 ADD
CDMA20001XRTT
PREREG
LST
CDMA20001XRTT
Cdma20001XrttPre BTS3900, BTS3900 PREREG
LocalCellId Local cell ID
Reg LTE MOD
CDMA20001XRTT
PREREG
RMV
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
LST
CDMA20001XRTT
Cdma20001XrttPre Mobile country BTS3900, BTS3900 PREREG
Mcc
Reg code LTE MOD
CDMA20001XRTT
PREREG
RMV
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
LST
CDMA20001XRTT
Cdma20001XrttPre Mobile network BTS3900, BTS3900 PREREG
Mnc
Reg code LTE MOD
CDMA20001XRTT
PREREG
RMV
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Cdma20001XrttCell CDMA20001XRTT BTS3900, BTS3900
CDMA20001XRTT
Reg Id cell ID LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Cdma20001XrttSec CDMA20001XRTT BTS3900, BTS3900
CDMA20001XRTT
Reg torId sector ID LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre BTS3900, BTS3900
Sid System ID CDMA20001XRTT
Reg LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre BTS3900, BTS3900
Nid Network ID CDMA20001XRTT
Reg LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre BTS3900, BTS3900
MscId MSC ID CDMA20001XRTT
Reg LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Band class include BTS3900, BTS3900
BandClassInclude CDMA20001XRTT
Reg indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre BTS3900, BTS3900
BandClass Band class CDMA20001XRTT
Reg LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
CSFB-registration MOD
Cdma20001XrttPre BTS3900, BTS3900
CsfbRegCfgInd parameters CDMA20001XRTT
Reg LTE
configure indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Multiple system ID BTS3900, BTS3900
MultiSidInd CDMA20001XRTT
Reg storage indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Multiple network ID BTS3900, BTS3900
MultiNidInd CDMA20001XRTT
Reg storage indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Home rgistration BTS3900, BTS3900
HomeRegInd CDMA20001XRTT
Reg indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
System ID roamer MOD
Cdma20001XrttPre BTS3900, BTS3900
ForeignSidRegInd registration CDMA20001XRTT
Reg LTE
indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Network ID roamer MOD
Cdma20001XrttPre BTS3900, BTS3900
ForeignNidRegInd registration CDMA20001XRTT
Reg LTE
indicator PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
Parameter change MOD
Cdma20001XrttPre BTS3900, BTS3900
ParamRegInd registration CDMA20001XRTT
Reg LTE
indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Power up MOD
Cdma20001XrttPre BTS3900, BTS3900
PowerUpRegInd registration CDMA20001XRTT
Reg LTE
indicator PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre BTS3900, BTS3900
RegPeriod Registration period CDMA20001XRTT
Reg LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre BTS3900, BTS3900
RegZone Registration zone CDMA20001XRTT
Reg LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
Number of MOD
Cdma20001XrttPre BTS3900, BTS3900
TotalZone registration zones CDMA20001XRTT
Reg LTE
to be retained PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre BTS3900, BTS3900
ZoneTimer Zone timer length CDMA20001XRTT
Reg LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
Power-down MOD
Cdma20001XrttPre BTS3900, BTS3900
PowerDownInclude registration include CDMA20001XRTT
Reg LTE
indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
AC barring MOD
Cdma20001XrttPre BTS3900, BTS3900
AcBarCfgInd information CDMA20001XRTT
Reg LTE
configure indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Persistence value MOD
Cdma20001XrttPre BTS3900, BTS3900
AcBar0to9 for access overload CDMA20001XRTT
Reg LTE
classes 0 to 9 PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
Persistence value MOD
Cdma20001XrttPre BTS3900, BTS3900
AcBar10 for access overload CDMA20001XRTT
Reg LTE
class 10 PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Persistence value MOD
Cdma20001XrttPre BTS3900, BTS3900
AcBar11 for access overload CDMA20001XRTT
Reg LTE
class 11 PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Persistence value MOD
Cdma20001XrttPre BTS3900, BTS3900
AcBar12 for access overload CDMA20001XRTT
Reg LTE
class 12 PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
Persistence value MOD
Cdma20001XrttPre BTS3900, BTS3900
AcBar13 for access overload CDMA20001XRTT
Reg LTE
class 13 PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Persistence value MOD
Cdma20001XrttPre BTS3900, BTS3900
AcBar14 for access overload CDMA20001XRTT
Reg LTE
class 14 PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Persistence value MOD
Cdma20001XrttPre BTS3900, BTS3900
AcBar15 for access overload CDMA20001XRTT
Reg LTE
class 15 PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
Persistence PREREG
Modifier For Access MOD
Cdma20001XrttPre BTS3900, BTS3900
AcBarMsg barring factor for CDMA20001XRTT
Reg LTE
message PREREG
transmissions LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Persistence
MOD
Cdma20001XrttPre modifier For Access BTS3900, BTS3900
AcBarReg CDMA20001XRTT
Reg barring factor for LTE
PREREG
registrations
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Persistence
MOD
Cdma20001XrttPre modifier For Access BTS3900, BTS3900
AcBarEmg CDMA20001XRTT
Reg barring factor for LTE
PREREG
emergency service
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
Protocol revision MOD
Cdma20001XrttPre BTS3900, BTS3900
ProtocolRevInc level include CDMA20001XRTT
Reg LTE
indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Protocol revision BTS3900, BTS3900
ProtocolRev CDMA20001XRTT
Reg level LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Min protocol MOD
Cdma20001XrttPre BTS3900, BTS3900
MinProtocolRevInc revision level CDMA20001XRTT
Reg LTE
include indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Min protocol BTS3900, BTS3900
MinProtocolRev CDMA20001XRTT
Reg revision level LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Authentication BTS3900, BTS3900
AuthInclude CDMA20001XRTT
Reg include indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Authentication BTS3900, BTS3900
Auth CDMA20001XRTT
Reg indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Max number of
MOD
Cdma20001XrttPre MaxNumAltSoInclu alternative service BTS3900, BTS3900
CDMA20001XRTT
Reg de options include LTE
PREREG
indicator
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Max number of MOD
Cdma20001XrttPre BTS3900, BTS3900
MaxNumAltSo alternative service CDMA20001XRTT
Reg LTE
options PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Preferred ACH MS MOD
Cdma20001XrttPre PrefMsIdTypeInclud BTS3900, BTS3900
ID type include CDMA20001XRTT
Reg e LTE
indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Preferred ACH MS BTS3900, BTS3900
PrefMsIdType CDMA20001XRTT
Reg ID type LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
Mobile country MOD
Cdma20001XrttPre BTS3900, BTS3900
MccInclude code include CDMA20001XRTT
Reg LTE
indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Mobile network BTS3900, BTS3900
MncInclude CDMA20001XRTT
Reg code send indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre ImsiTSupportedIncl IMSI_T supported BTS3900, BTS3900
CDMA20001XRTT
Reg ude include indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre IMSI_T support BTS3900, BTS3900
ImsiTSupported CDMA20001XRTT
Reg indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Forward power
MOD
Cdma20001XrttPre control parameter BTS3900, BTS3900
FpcFchCfgInclude CDMA20001XRTT
Reg of FCH include LTE
PREREG
indicator
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
RC3 initial setpoint MOD
Cdma20001XrttPre BTS3900, BTS3900
FpcFchInitSteptRc3 of forward power CDMA20001XRTT
Reg LTE
control parameter PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
RC4 initial setpoint MOD
Cdma20001XrttPre BTS3900, BTS3900
FpcFchInitSteptRc4 of forward power CDMA20001XRTT
Reg LTE
control parameter PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
RC5 initial setpoint MOD
Cdma20001XrttPre BTS3900, BTS3900
FpcFchInitSteptRc5 of forward power CDMA20001XRTT
Reg LTE
control parameter PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
RC11 initial setpoint MOD
Cdma20001XrttPre FpcFchInitSteptRc1 BTS3900, BTS3900
of forward power CDMA20001XRTT
Reg 1 LTE
control parameter PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
RC12 initial setpoint MOD
Cdma20001XrttPre FpcFchInitSteptRc1 BTS3900, BTS3900
of forward power CDMA20001XRTT
Reg 2 LTE
control parameter PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
Pilot PN sequence
MOD
Cdma20001XrttPre offset index BTS3900, BTS3900
PilotIncrInclude CDMA20001XRTT
Reg increment include LTE
PREREG
indicator
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
Pilot PN sequence MOD
Cdma20001XrttPre BTS3900, BTS3900
PilotIncr offset index CDMA20001XRTT
Reg LTE
increment PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Leap seconds BTS3900, BTS3900
LpSecInclude CDMA20001XRTT
Reg include indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Time zone include BTS3900, BTS3900
LtmOffInclude CDMA20001XRTT
Reg indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre Daylight flag BTS3900, BTS3900
DayltInclude CDMA20001XRTT
Reg include indicator LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
GCSNA layer2 MOD
Cdma20001XrttPre GcsnaL2AckTimerI BTS3900, BTS3900
acknowledge timer CDMA20001XRTT
Reg nclude LTE
include indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre GCSNA layer2 BTS3900, BTS3900
GcsnaL2AckTimer CDMA20001XRTT
Reg acknowledge timer LTE
PREREG
LST
CDMA20001XRTT
PREREG
 ADD
CDMA20001XRTT
PREREG
GCSNA sequence MOD
Cdma20001XrttPre GcsnaSeqContextT BTS3900, BTS3900
context timer CDMA20001XRTT
Reg Include LTE
include indicator PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA20001XRTT
PREREG
MOD
Cdma20001XrttPre GcsnaSeqContextTi GCSNA sequence BTS3900, BTS3900
CDMA20001XRTT
Reg mer context timer LTE
PREREG
LST
CDMA20001XRTT
PREREG

ADD
CDMA2000HRPDN
CELL
LST
CDMA2000HRPDN
Cdma2000HrpdNC BTS3900, BTS3900 CELL
LocalCellId Local cell ID
ell LTE MOD
CDMA2000HRPDN
CELL
RMV
CDMA2000HRPDN
CELL
 ADD
CDMA2000HRPDN
CELL
LST
CDMA2000HRPDN
Cdma2000HrpdNC BTS3900, BTS3900 CELL
SectorId104 SectorID104
ell LTE MOD
CDMA2000HRPDN
CELL
RMV
CDMA2000HRPDN
CELL
 ADD
CDMA2000HRPDN
CELL
LST
CDMA2000HRPDN
Cdma2000HrpdNC BTS3900, BTS3900 CELL
SectorId24 SectorID24
ell LTE MOD
CDMA2000HRPDN
CELL
RMV
CDMA2000HRPDN
CELL

ADD
CDMA2000HRPDN
CELL
LST
CDMA2000HRPDN
Cdma2000HrpdNC BTS3900, BTS3900 CELL
BandClass Band class
ell LTE MOD
CDMA2000HRPDN
CELL
RMV
CDMA2000HRPDN
CELL
 ADD
CDMA2000HRPDN
CELL
LST
CDMA2000HRPDN
Cdma2000HrpdNC BTS3900, BTS3900 CELL
Frequency Frequency
ell LTE MOD
CDMA2000HRPDN
CELL
RMV
CDMA2000HRPDN
CELL

ADD
CDMA2000HRPDN
CELL
MOD
Cdma2000HrpdNC No handover BTS3900, BTS3900
NoHoFlag CDMA2000HRPDN
ell indicator LTE
CELL
LST
CDMA2000HRPDN
CELL

ADD
CDMA2000HRPDN
CELL
MOD
Cdma2000HrpdNC BTS3900, BTS3900
NoRmvFlag No remove indicator CDMA2000HRPDN
ell LTE
CELL
LST
CDMA2000HRPDN
CELL

LST
Cdma2000HrpdNC BTS3900, BTS3900
AnrFlag ANR flag CDMA2000HRPDN
ell LTE
CELL
 ADD
CDMA2000HRPDN
CELL
MOD
Cdma2000HrpdNC BTS3900, BTS3900
LocalCellName Local cell name CDMA2000HRPDN
ell LTE
CELL
LST
CDMA2000HRPDN
CELL

ADD
CDMA2000HRPDN
CELL
MOD
Cdma2000HrpdNC NeighbourCellNam Neighbour cell BTS3900, BTS3900
CDMA2000HRPDN
ell e name LTE
CELL
LST
CDMA2000HRPDN
CELL
 ADD
CDMA2000HRPDN
CELL
MOD
Cdma2000HrpdNC BTS3900, BTS3900
CtrlMode Control Mode CDMA2000HRPDN
ell LTE
CELL
LST
CDMA2000HRPDN
CELL

ADD
CDMA2000HRPDP
REREG
LST
CDMA2000HRPDP
Cdma2000HrpdPre BTS3900, BTS3900 REREG
LocalCellId Local cell ID
Reg LTE MOD
CDMA2000HRPDP
REREG
RMV
CDMA2000HRPDP
REREG
 ADD
CDMA2000HRPDP
REREG
LST
CDMA2000HRPDP
Cdma2000HrpdPre Mobile country BTS3900, BTS3900 REREG
Mcc
Reg code LTE MOD
CDMA2000HRPDP
REREG
RMV
CDMA2000HRPDP
REREG

ADD
CDMA2000HRPDP
REREG
LST
CDMA2000HRPDP
Cdma2000HrpdPre Mobile network BTS3900, BTS3900 REREG
Mnc
Reg code LTE MOD
CDMA2000HRPDP
REREG
RMV
CDMA2000HRPDP
REREG
 ADD
CDMA2000HRPDP
REREG
SIB8 Pre- MOD
Cdma2000HrpdPre Sib8PreRegistration BTS3900, BTS3900
registration allowed CDMA2000HRPDP
Reg Allowed LTE
indicator REREG
LST
CDMA2000HRPDP
REREG

ADD
CDMA2000HRPDP
REREG
PreRegistrationInfo
MOD
Cdma2000HrpdPre McPreRegParaCfgI HRPD configure BTS3900, BTS3900
CDMA2000HRPDP
Reg nd indicator in LTE
REREG
MeasConfig
LST
CDMA2000HRPDP
REREG

ADD
CDMA2000HRPDP
REREG
Pre-registration MOD
Cdma2000HrpdPre McPreRegistrationA BTS3900, BTS3900
allowed indicator in CDMA2000HRPDP
Reg llowed LTE
MeasConfig REREG
LST
CDMA2000HRPDP
REREG

ADD
CDMA2000HRPDP
REREG
MOD
Cdma2000HrpdPre PreRegistrationZon Pre-registration BTS3900, BTS3900
CDMA2000HRPDP
Reg eId zone ID LTE
REREG
LST
CDMA2000HRPDP
REREG
 ADD
CDMA2000HRPDP
REREG
Secondary pre-
MOD
Cdma2000HrpdPre SecondaryPreRegZ registration zone ID BTS3900, BTS3900
CDMA2000HRPDP
Reg oneId0Ind 0 configure LTE
REREG
indicator
LST
CDMA2000HRPDP
REREG

ADD
CDMA2000HRPDP
REREG
Secondary pre- MOD
Cdma2000HrpdPre SecondaryPreRegZ BTS3900, BTS3900
registration zone ID CDMA2000HRPDP
Reg oneId0 LTE
0 REREG
LST
CDMA2000HRPDP
REREG

ADD
CDMA2000HRPDP
REREG
Secondary pre-
MOD
Cdma2000HrpdPre SecondaryPreRegZ registration zone ID BTS3900, BTS3900
CDMA2000HRPDP
Reg oneId1Ind 1 configure LTE
REREG
indicator
LST
CDMA2000HRPDP
REREG
 ADD
CDMA2000HRPDP
REREG
Secondary pre- MOD
Cdma2000HrpdPre SecondaryPreRegZ BTS3900, BTS3900
registration zone ID CDMA2000HRPDP
Reg oneId1 LTE
1 REREG
LST
CDMA2000HRPDP
REREG

ADD
CDMA2000HRPDR
EFCELL
LST
CDMA2000HRPDR
Cdma2000HrpdRef BTS3900, BTS3900 EFCELL
LocalCellId Local cell ID
Cell LTE MOD
CDMA2000HRPDR
EFCELL
RMV
CDMA2000HRPDR
EFCELL

ADD
CDMA2000HRPDR
EFCELL
LST
CDMA2000HRPDR
Cdma2000HrpdRef Mobile country BTS3900, BTS3900 EFCELL
Mcc
Cell code LTE MOD
CDMA2000HRPDR
EFCELL
RMV
CDMA2000HRPDR
EFCELL
 ADD
CDMA2000HRPDR
EFCELL
LST
CDMA2000HRPDR
Cdma2000HrpdRef Mobile network BTS3900, BTS3900 EFCELL
Mnc
Cell code LTE MOD
CDMA2000HRPDR
EFCELL
RMV
CDMA2000HRPDR
EFCELL

ADD
CDMA2000HRPDR
EFCELL
LST
CDMA2000HRPDR
Cdma2000HrpdRef BTS3900, BTS3900 EFCELL
SectorId104 SectorID104
Cell LTE MOD
CDMA2000HRPDR
EFCELL
RMV
CDMA2000HRPDR
EFCELL
 ADD
CDMA2000HRPDR
EFCELL
LST
CDMA2000HRPDR
Cdma2000HrpdRef BTS3900, BTS3900 EFCELL
SectorId24 SectorID24
Cell LTE MOD
CDMA2000HRPDR
EFCELL
RMV
CDMA2000HRPDR
EFCELL
 ADD
CDMA2000HRPDR
EFCELL
MOD
Cdma2000HrpdRef BTS3900, BTS3900
SelectedRatio Selected ratio CDMA2000HRPDR
Cell LTE
EFCELL
LST
CDMA2000HRPDR
EFCELL

ADD
CDMA2000NFREQ
LST
BTS3900, BTS3900 CDMA2000NFREQ
Cdma2000Nfreq LocalCellId Local cell ID
LTE MOD
CDMA2000NFREQ
RMV
CDMA2000NFREQ

ADD
CDMA2000NFREQ
LST
BTS3900, BTS3900 CDMA2000NFREQ
Cdma2000Nfreq BandClass Band class
LTE MOD
CDMA2000NFREQ
RMV
CDMA2000NFREQ
 ADD
CDMA2000NFREQ
LST
BTS3900, BTS3900 CDMA2000NFREQ
Cdma2000Nfreq Frequency Frequency
LTE MOD
CDMA2000NFREQ
RMV
CDMA2000NFREQ

ADD
CDMA2000NFREQ
BTS3900, BTS3900 MOD
Cdma2000Nfreq OffsetFreq Frequency offset
LTE CDMA2000NFREQ
LST
CDMA2000NFREQ

ADD
CDMA2000NFREQ
SearchWindowSize Search window size BTS3900, BTS3900 MOD
Cdma2000Nfreq
CfgInd configure indicator LTE CDMA2000NFREQ
LST
CDMA2000NFREQ
 ADD
CDMA2000NFREQ
BTS3900, BTS3900 MOD
Cdma2000Nfreq SearchWindowSize Search window size
LTE CDMA2000NFREQ
LST
CDMA2000NFREQ

ADD
CDMA2000NFREQ
BTS3900, BTS3900 MOD
Cdma2000Nfreq FrequencyPri Frequency priority
LTE CDMA2000NFREQ
LST
CDMA2000NFREQ

ADD CLUSTER
BTS3900, BTS3900
Cluster ClusterId Cluster ID LST CLUSTER
LTE
RMV CLUSTER
 ADD CLUSTER
BTS3900, BTS3900 DSP
Cluster ClusterType Cluster Type
LTE CLUSTERCELL
LST CLUSTER

ADD
CLUSTERCELL
DSP
CLUSTERCELL
LST
BTS3900, BTS3900
ClusterCell ClusterId Cluster ID CLUSTERCELL
LTE
RMV
CLUSTERCELL
DSP
CELLCAMCSTATU
S

ADD
CLUSTERCELL
LST
CLUSTERCELL
RMV
Mobile country BTS3900, BTS3900
ClusterCell Mcc CLUSTERCELL
code LTE
DSP
CELLCAMCSTATU
S
DSP
CLUSTERCELL
 ADD
CLUSTERCELL
LST
CLUSTERCELL
RMV
Mobile network BTS3900, BTS3900
ClusterCell Mnc CLUSTERCELL
code LTE
DSP
CELLCAMCSTATU
S
DSP
CLUSTERCELL

ADD
CLUSTERCELL
LST
CLUSTERCELL
RMV
BTS3900, BTS3900
ClusterCell eNodeBId eNodeB ID CLUSTERCELL
LTE
DSP
CELLCAMCSTATU
S
DSP
CLUSTERCELL
 ADD
CLUSTERCELL
LST
BTS3900, BTS3900 CLUSTERCELL
ClusterCell CellId Cell ID
LTE RMV
CLUSTERCELL
DSP
CLUSTERCELL

BTS3900, BTS3900 DSP

ClusterCell CellClusterStatus Cell Cluster Status
LTE CLUSTERCELL
 DSP
Cell UL CAMC BTS3900, BTS3900
ClusterCell CellUlCamcStatus CELLCAMCSTATU
Status LTE
S
 ADD
CSPCCELLSRSME
ASNCELL
LST
CspcCellSrsMeasN Mobile country BTS3900, BTS3900
Mcc CSPCCELLSRSME
Cell code LTE
ASNCELL
RMV
CSPCCELLSRSME
ASNCELL

ADD
CSPCCELLSRSME
ASNCELL
LST
CspcCellSrsMeasN Mobile network BTS3900, BTS3900
Mnc CSPCCELLSRSME
Cell code LTE
ASNCELL
RMV
CSPCCELLSRSME
ASNCELL
 ADD
CSPCCELLSRSME
ASNCELL
LST
CspcCellSrsMeasN BTS3900, BTS3900
eNodeBId eNodeB ID CSPCCELLSRSME
Cell LTE
ASNCELL
RMV
CSPCCELLSRSME
ASNCELL

ADD
CSPCCELLSRSME
ASNCELL
LST
CspcCellSrsMeasN BTS3900, BTS3900
CellId Cell ID CSPCCELLSRSME
Cell LTE
ASNCELL
RMV
CSPCCELLSRSME
ASNCELL
 ADD
CSPCCELLSRSME
ASNCELL
LST
CspcCellSrsMeasN Neighbor mobile BTS3900, BTS3900
NCellMcc CSPCCELLSRSME
Cell country code LTE
ASNCELL
RMV
CSPCCELLSRSME
ASNCELL

ADD
CSPCCELLSRSME
ASNCELL
LST
CspcCellSrsMeasN Neighbor mobile BTS3900, BTS3900
NCellMnc CSPCCELLSRSME
Cell network code LTE
ASNCELL
RMV
CSPCCELLSRSME
ASNCELL
 ADD
CSPCCELLSRSME
ASNCELL
LST
CspcCellSrsMeasN Neighbor eNodeB BTS3900, BTS3900
NCellENodeBId CSPCCELLSRSME
Cell ID LTE
ASNCELL
RMV
CSPCCELLSRSME
ASNCELL
 ADD
CSPCCELLSRSME
ASNCELL
LST
CspcCellSrsMeasN BTS3900, BTS3900
NCellId Neighbor Cell ID CSPCCELLSRSME
Cell LTE
ASNCELL
RMV
CSPCCELLSRSME
ASNCELL

ADD
CSPCCLUSTER
BTS3900, BTS3900 LST
CspcCluster CspcClusterId CSPC Cluster ID
LTE CSPCCLUSTER
RMV
CSPCCLUSTER

ADD
CSPCCLUSTERCE
LL
LST
BTS3900, BTS3900
CspcClusterCell CspcClusterId CSPC Cluster ID CSPCCLUSTERCE
LTE
LL
RMV
CSPCCLUSTERCE
LL
 ADD
CSPCCLUSTERCE
LL
LST
Mobile country BTS3900, BTS3900
CspcClusterCell Mcc CSPCCLUSTERCE
code LTE
LL
RMV
CSPCCLUSTERCE
LL

ADD
CSPCCLUSTERCE
LL
LST
Mobile network BTS3900, BTS3900
CspcClusterCell Mnc CSPCCLUSTERCE
code LTE
LL
RMV
CSPCCLUSTERCE
LL
 ADD
CSPCCLUSTERCE
LL
LST
BTS3900, BTS3900
CspcClusterCell eNodeBId eNodeB ID CSPCCLUSTERCE
LTE
LL
RMV
CSPCCLUSTERCE
LL

ADD
CSPCCLUSTERCE
LL
LST
BTS3900, BTS3900
CspcClusterCell CellId Cell ID CSPCCLUSTERCE
LTE
LL
RMV
CSPCCLUSTERCE
LL
 ADD
EUTRANEXTERNA
LCELLPLMN
LST
EutranExternalCell Mobile country BTS3900, BTS3900
Mcc EUTRANEXTERNA
Plmn code LTE
LCELLPLMN
RMV
EUTRANEXTERNA
LCELLPLMN

ADD
EUTRANEXTERNA
LCELLPLMN
LST
EutranExternalCell Mobile network BTS3900, BTS3900
Mnc EUTRANEXTERNA
Plmn code LTE
LCELLPLMN
RMV
EUTRANEXTERNA
LCELLPLMN

ADD
EUTRANEXTERNA
LCELLPLMN
LST
EutranExternalCell BTS3900, BTS3900
eNodeBId eNodeB ID EUTRANEXTERNA
Plmn LTE
LCELLPLMN
RMV
EUTRANEXTERNA
LCELLPLMN
 ADD
EUTRANEXTERNA
LCELLPLMN
LST
EutranExternalCell BTS3900, BTS3900
CellId Cell ID EUTRANEXTERNA
Plmn LTE
LCELLPLMN
RMV
EUTRANEXTERNA
LCELLPLMN

ADD
EUTRANEXTERNA
LCELLPLMN
LST
EutranExternalCell Share mobile BTS3900, BTS3900
ShareMcc EUTRANEXTERNA
Plmn country code LTE
LCELLPLMN
RMV
EUTRANEXTERNA
LCELLPLMN
 ADD
EUTRANEXTERNA
LCELLPLMN
LST
EutranExternalCell Share mobile BTS3900, BTS3900
ShareMnc EUTRANEXTERNA
Plmn network code LTE
LCELLPLMN
RMV
EUTRANEXTERNA
LCELLPLMN

ADD
GERANEXTERNAL
CELLPLMN
LST
GeranExternalCellP BTS3900, BTS3900
GeranCellId GERAN cell ID GERANEXTERNAL
lmn LTE
CELLPLMN
RMV
GERANEXTERNAL
CELLPLMN

ADD
GERANEXTERNAL
CELLPLMN
LST
GeranExternalCellP BTS3900, BTS3900
Lac Location area code GERANEXTERNAL
lmn LTE
CELLPLMN
RMV
GERANEXTERNAL
CELLPLMN

ADD
GERANEXTERNAL
CELLPLMN
LST
GeranExternalCellP Mobile country BTS3900, BTS3900
Mcc GERANEXTERNAL
lmn code LTE
CELLPLMN
RMV
GERANEXTERNAL
CELLPLMN
 ADD
GERANEXTERNAL
CELLPLMN
LST
GeranExternalCellP Mobile network BTS3900, BTS3900
Mnc GERANEXTERNAL
lmn code LTE
CELLPLMN
RMV
GERANEXTERNAL
CELLPLMN

ADD
GERANEXTERNAL
CELLPLMN
LST
GeranExternalCellP Share mobile BTS3900, BTS3900
ShareMcc GERANEXTERNAL
lmn country code LTE
CELLPLMN
RMV
GERANEXTERNAL
CELLPLMN

ADD
GERANEXTERNAL
CELLPLMN
LST
GeranExternalCellP Share mobile BTS3900, BTS3900
ShareMnc GERANEXTERNAL
lmn network code LTE
CELLPLMN
RMV
GERANEXTERNAL
CELLPLMN
 ADD
UTRANEXTERNAL
CELLPLMN
LST
UtranExternalCellPl Mobile country BTS3900, BTS3900
Mcc UTRANEXTERNAL
mn code LTE
CELLPLMN
RMV
UTRANEXTERNAL
CELLPLMN

ADD
UTRANEXTERNAL
CELLPLMN
LST
UtranExternalCellPl Mobile network BTS3900, BTS3900
Mnc UTRANEXTERNAL
mn code LTE
CELLPLMN
RMV
UTRANEXTERNAL
CELLPLMN
 ADD
UTRANEXTERNAL
CELLPLMN
LST
UtranExternalCellPl BTS3900, BTS3900
RncId RNC ID UTRANEXTERNAL
mn LTE
CELLPLMN
RMV
UTRANEXTERNAL
CELLPLMN
 ADD
UTRANEXTERNAL
CELLPLMN
LST
UtranExternalCellPl BTS3900, BTS3900
CellId RNC cell ID UTRANEXTERNAL
mn LTE
CELLPLMN
RMV
UTRANEXTERNAL
CELLPLMN

ADD
UTRANEXTERNAL
CELLPLMN
LST
UtranExternalCellPl Share mobile BTS3900, BTS3900
ShareMcc UTRANEXTERNAL
mn country code LTE
CELLPLMN
RMV
UTRANEXTERNAL
CELLPLMN
 ADD
UTRANEXTERNAL
CELLPLMN
LST
UtranExternalCellPl Share mobile BTS3900, BTS3900
ShareMnc UTRANEXTERNAL
mn network code LTE
CELLPLMN
RMV
UTRANEXTERNAL
CELLPLMN

ADD
CDMA2000HRPDE
XTCELL
LST
CDMA2000HRPDE
Cdma2000HrpdExt BTS3900, BTS3900 XTCELL
SectorId104 SectorID104
Cell LTE MOD
CDMA2000HRPDE
XTCELL
RMV
CDMA2000HRPDE
XTCELL
 ADD
CDMA2000HRPDE
XTCELL
LST
CDMA2000HRPDE
Cdma2000HrpdExt BTS3900, BTS3900 XTCELL
SectorId24 SectorID24
Cell LTE MOD
CDMA2000HRPDE
XTCELL
RMV
CDMA2000HRPDE
XTCELL

ADD
CDMA2000HRPDE
XTCELL
LST
CDMA2000HRPDE
Cdma2000HrpdExt BTS3900, BTS3900 XTCELL
BandClass Band class
Cell LTE MOD
CDMA2000HRPDE
XTCELL
RMV
CDMA2000HRPDE
XTCELL
 ADD
CDMA2000HRPDE
XTCELL
LST
CDMA2000HRPDE
Cdma2000HrpdExt BTS3900, BTS3900 XTCELL
Frequency Frequency
Cell LTE MOD
CDMA2000HRPDE
XTCELL
RMV
CDMA2000HRPDE
XTCELL

ADD
CDMA2000HRPDE
XTCELL
MOD
Cdma2000HrpdExt Mobile country BTS3900, BTS3900
Mcc CDMA2000HRPDE
Cell code LTE
XTCELL
LST
CDMA2000HRPDE
XTCELL

ADD
CDMA2000HRPDE
XTCELL
MOD
Cdma2000HrpdExt Mobile network BTS3900, BTS3900
Mnc CDMA2000HRPDE
Cell code LTE
XTCELL
LST
CDMA2000HRPDE
XTCELL
 ADD
CDMA2000HRPDE
XTCELL
MOD
Cdma2000HrpdExt BTS3900, BTS3900
PnOffset Physical cell ID CDMA2000HRPDE
Cell LTE
XTCELL
LST
CDMA2000HRPDE
XTCELL

ADD
CDMA2000HRPDE
XTCELL
MOD
Cdma2000HrpdExt BTS3900, BTS3900
CellName Cell name CDMA2000HRPDE
Cell LTE
XTCELL
LST
CDMA2000HRPDE
XTCELL
 ADD
CDMA2000HRPDE
XTCELL
MOD
Cdma2000HrpdExt BTS3900, BTS3900
CtrlMode Control Mode CDMA2000HRPDE
Cell LTE
XTCELL
LST
CDMA2000HRPDE
XTCELL

ADD
CDMA20001XRTT
EXTCELL
LST
CDMA20001XRTT
Cdma20001XrttExt Cdma20001XrttCell CDMA20001XRTT BTS3900, BTS3900 EXTCELL
Cell Id cell ID LTE MOD
CDMA20001XRTT
EXTCELL
RMV
CDMA20001XRTT
EXTCELL
 ADD
CDMA20001XRTT
EXTCELL
LST
CDMA20001XRTT
Cdma20001XrttExt Cdma20001XrttSec CDMA20001XRTT BTS3900, BTS3900 EXTCELL
Cell torId sector ID LTE MOD
CDMA20001XRTT
EXTCELL
RMV
CDMA20001XRTT
EXTCELL

ADD
CDMA20001XRTT
EXTCELL
LST
CDMA20001XRTT
Cdma20001XrttExt BTS3900, BTS3900 EXTCELL
BandClass Band class
Cell LTE MOD
CDMA20001XRTT
EXTCELL
RMV
CDMA20001XRTT
EXTCELL

ADD
CDMA20001XRTT
EXTCELL
LST
CDMA20001XRTT
Cdma20001XrttExt BTS3900, BTS3900 EXTCELL
Frequency Frequency
Cell LTE MOD
CDMA20001XRTT
EXTCELL
RMV
CDMA20001XRTT
EXTCELL

ADD
CDMA20001XRTT
EXTCELL
LST
CDMA20001XRTT
Cdma20001XrttExt BTS3900, BTS3900 EXTCELL
Sid System ID
Cell LTE MOD
CDMA20001XRTT
EXTCELL
RMV
CDMA20001XRTT
EXTCELL
 ADD
CDMA20001XRTT
EXTCELL
LST
CDMA20001XRTT
Cdma20001XrttExt BTS3900, BTS3900 EXTCELL
Nid Network ID
Cell LTE MOD
CDMA20001XRTT
EXTCELL
RMV
CDMA20001XRTT
EXTCELL

ADD
CDMA20001XRTT
EXTCELL
MOD
Cdma20001XrttExt Mobile country BTS3900, BTS3900
Mcc CDMA20001XRTT
Cell code LTE
EXTCELL
LST
CDMA20001XRTT
EXTCELL
 ADD
CDMA20001XRTT
EXTCELL
MOD
Cdma20001XrttExt Mobile network BTS3900, BTS3900
Mnc CDMA20001XRTT
Cell code LTE
EXTCELL
LST
CDMA20001XRTT
EXTCELL

ADD
CDMA20001XRTT
EXTCELL
MOD
Cdma20001XrttExt BTS3900, BTS3900
MscId MSC ID CDMA20001XRTT
Cell LTE
EXTCELL
LST
CDMA20001XRTT
EXTCELL
 ADD
CDMA20001XRTT
EXTCELL
MOD
Cdma20001XrttExt BTS3900, BTS3900
PnOffset Physical cell ID CDMA20001XRTT
Cell LTE
EXTCELL
LST
CDMA20001XRTT
EXTCELL

ADD
CDMA20001XRTT
EXTCELL
MOD
Cdma20001XrttExt BTS3900, BTS3900
CellName Cell name CDMA20001XRTT
Cell LTE
EXTCELL
LST
CDMA20001XRTT
EXTCELL

ADD
CDMA20001XRTT
EXTCELL
MOD
Cdma20001XrttExt BTS3900, BTS3900
CtrlMode Control Mode CDMA20001XRTT
Cell LTE
EXTCELL
LST
CDMA20001XRTT
EXTCELL
 ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
Cdma20001XrttNC BTS3900, BTS3900 NCELL
LocalCellId Local cell ID
ell LTE MOD
CDMA20001XRTT
NCELL
RMV
CDMA20001XRTT
NCELL

ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
Cdma20001XrttNC Cdma20001XrttCell CDMA20001XRTT BTS3900, BTS3900 NCELL
ell Id cell ID LTE MOD
CDMA20001XRTT
NCELL
RMV
CDMA20001XRTT
NCELL

ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
Cdma20001XrttNC Cdma20001XrttSec CDMA20001XRTT BTS3900, BTS3900 NCELL
ell torId sector ID LTE MOD
CDMA20001XRTT
NCELL
RMV
CDMA20001XRTT
NCELL

ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
Cdma20001XrttNC BTS3900, BTS3900 NCELL
BandClass Band class
ell LTE MOD
CDMA20001XRTT
NCELL
RMV
CDMA20001XRTT
NCELL
 ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
Cdma20001XrttNC BTS3900, BTS3900 NCELL
Frequency Frequency
ell LTE MOD
CDMA20001XRTT
NCELL
RMV
CDMA20001XRTT
NCELL

ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
Cdma20001XrttNC BTS3900, BTS3900 NCELL
Sid System ID
ell LTE MOD
CDMA20001XRTT
NCELL
RMV
CDMA20001XRTT
NCELL

ADD
CDMA20001XRTT
NCELL
LST
CDMA20001XRTT
Cdma20001XrttNC BTS3900, BTS3900 NCELL
Nid Network ID
ell LTE MOD
CDMA20001XRTT
NCELL
RMV
CDMA20001XRTT
NCELL

ADD
CDMA20001XRTT
NCELL
MOD
Cdma20001XrttNC No handover BTS3900, BTS3900
NoHoFlag CDMA20001XRTT
ell indicator LTE
NCELL
LST
CDMA20001XRTT
NCELL
 ADD
CDMA20001XRTT
NCELL
MOD
Cdma20001XrttNC BTS3900, BTS3900
NoRmvFlag No remove indicator CDMA20001XRTT
ell LTE
NCELL
LST
CDMA20001XRTT
NCELL

LST
Cdma20001XrttNC BTS3900, BTS3900
AnrFlag ANR flag CDMA20001XRTT
ell LTE
NCELL

ADD
CDMA20001XRTT
NCELL
MOD
Cdma20001XrttNC BTS3900, BTS3900
LocalCellName Local cell name CDMA20001XRTT
ell LTE
NCELL
LST
CDMA20001XRTT
NCELL
 ADD
CDMA20001XRTT
NCELL
MOD
Cdma20001XrttNC NeighbourCellNam Neighbour cell BTS3900, BTS3900
CDMA20001XRTT
ell e name LTE
NCELL
LST
CDMA20001XRTT
NCELL
 ADD
CDMA20001XRTT
NCELL
MOD
Cdma20001XrttNC BTS3900, BTS3900
CtrlMode Control Mode CDMA20001XRTT
ell LTE
NCELL
LST
CDMA20001XRTT
NCELL

ADD
CDMA2000BANDC
LASS
LST
CDMA2000BANDC
Cdma2000BandCla BTS3900, BTS3900 LASS
LocalCellId Local cell ID
ss LTE MOD
CDMA2000BANDC
LASS
RMV
CDMA2000BANDC
LASS
 ADD
CDMA2000BANDC
LASS
LST
CDMA2000BANDC
Cdma2000BandCla BTS3900, BTS3900 LASS
BandClass Band class
ss LTE MOD
CDMA2000BANDC
LASS
RMV
CDMA2000BANDC
LASS

ADD
CDMA2000BANDC
LASS
CDMA20001XRTT MOD
Cdma2000BandCla Cdma20001XrttCell BTS3900, BTS3900
cell reselection CDMA2000BANDC
ss ReselInd LTE
indicator LASS
LST
CDMA2000BANDC
LASS

ADD
CDMA2000BANDC
LASS
CDMA20001XRTT MOD
Cdma2000BandCla Cdma20001XrttCell BTS3900, BTS3900
cell reselection CDMA2000BANDC
ss ReselPri LTE
priority LASS
LST
CDMA2000BANDC
LASS
 ADD
CDMA2000BANDC
LASS
CDMA20001XRTT MOD
Cdma2000BandCla Cdma20001XrttThr BTS3900, BTS3900
high priority CDMA2000BANDC
ss eshXHigh LTE
threshold LASS
LST
CDMA2000BANDC
LASS

ADD
CDMA2000BANDC
LASS
CDMA20001XRTT MOD
Cdma2000BandCla Cdma20001XrttThr BTS3900, BTS3900
lower priority CDMA2000BANDC
ss eshXLow LTE
threshold LASS
LST
CDMA2000BANDC
LASS
 ADD
CDMA2000BANDC
LASS
CDMA2000HRPD MOD
Cdma2000BandCla Cdma2000HrpdCell BTS3900, BTS3900
cell reselection CDMA2000BANDC
ss ReselInd LTE
indicator LASS
LST
CDMA2000BANDC
LASS

ADD
CDMA2000BANDC
LASS
CDMA2000HRPD MOD
Cdma2000BandCla Cdma2000HrpdCell BTS3900, BTS3900
cell reselection CDMA2000BANDC
ss ReselPri LTE
priority LASS
LST
CDMA2000BANDC
LASS

ADD
CDMA2000BANDC
LASS
CDMA2000HRPD MOD
Cdma2000BandCla Cdma2000HrpdThr BTS3900, BTS3900
high priority CDMA2000BANDC
ss eshXHigh LTE
threshold LASS
LST
CDMA2000BANDC
LASS
 ADD
CDMA2000BANDC
LASS
CDMA2000HRPD MOD
Cdma2000BandCla Cdma2000HrpdThr BTS3900, BTS3900
lower priority CDMA2000BANDC
ss eshXLow LTE
threshold LASS
LST
CDMA2000BANDC
LASS

ADD
GERANEXTERNAL
CELL
LST
GERANEXTERNAL
Mobile country BTS3900, BTS3900 CELL
GeranExternalCell Mcc
code LTE MOD
GERANEXTERNAL
CELL
RMV
GERANEXTERNAL
CELL

ADD
GERANEXTERNAL
CELL
LST
GERANEXTERNAL
Mobile network BTS3900, BTS3900 CELL
GeranExternalCell Mnc
code LTE MOD
GERANEXTERNAL
CELL
RMV
GERANEXTERNAL
CELL
 ADD
GERANEXTERNAL
CELL
LST
GERANEXTERNAL
BTS3900, BTS3900 CELL
GeranExternalCell GeranCellId GERAN cell ID
LTE MOD
GERANEXTERNAL
CELL
RMV
GERANEXTERNAL
CELL

ADD
GERANEXTERNAL
CELL
LST
GERANEXTERNAL
BTS3900, BTS3900 CELL
GeranExternalCell Lac Location area code
LTE MOD
GERANEXTERNAL
CELL
RMV
GERANEXTERNAL
CELL

ADD
GERANEXTERNAL
CELL
MOD
Routing area code BTS3900, BTS3900
GeranExternalCell RacCfgInd GERANEXTERNAL
configure indicator LTE
CELL
LST
GERANEXTERNAL
CELL

ADD
GERANEXTERNAL
CELL
MOD
BTS3900, BTS3900
GeranExternalCell Rac Routing area code GERANEXTERNAL
LTE
CELL
LST
GERANEXTERNAL
CELL
 ADD
GERANEXTERNAL
CELL
MOD
BTS3900, BTS3900
GeranExternalCell BandIndicator Band indicator GERANEXTERNAL
LTE
CELL
LST
GERANEXTERNAL
CELL

ADD
GERANEXTERNAL
CELL
MOD
BTS3900, BTS3900
GeranExternalCell GeranArfcn GERAN ARFCN GERANEXTERNAL
LTE
CELL
LST
GERANEXTERNAL
CELL

ADD
GERANEXTERNAL
CELL
MOD
NetworkColourCod BTS3900, BTS3900
GeranExternalCell Network color code GERANEXTERNAL
e LTE
CELL
LST
GERANEXTERNAL
CELL
 ADD
GERANEXTERNAL
CELL
MOD
BaseStationColour Base station color BTS3900, BTS3900
GeranExternalCell GERANEXTERNAL
Code code LTE
CELL
LST
GERANEXTERNAL
CELL

ADD
GERANEXTERNAL
CELL
MOD
BTS3900, BTS3900
GeranExternalCell DtmInd DTM indication GERANEXTERNAL
LTE
CELL
LST
GERANEXTERNAL
CELL
 ADD
GERANEXTERNAL
CELL
MOD
BTS3900, BTS3900
GeranExternalCell CellName Cell name GERANEXTERNAL
LTE
CELL
LST
GERANEXTERNAL
CELL

ADD
GERANEXTERNAL
CELL
MOD
CS and PS BTS3900, BTS3900
GeranExternalCell CsPsHOInd GERANEXTERNAL
handover indication LTE
CELL
LST
GERANEXTERNAL
CELL
 ADD
GERANEXTERNAL
CELL
Ultra-Flash CSFB MOD
BTS3900, BTS3900
GeranExternalCell UltraFlashCsfbInd Capability GERANEXTERNAL
LTE
Indication CELL
LST
GERANEXTERNAL
CELL
 ADD
GERANEXTERNAL
CELL
MOD
Roaming Area BTS3900, BTS3900
GeranExternalCell RoamingAreaHoInd GERANEXTERNAL
Handover Indicator LTE
CELL
LST
GERANEXTERNAL
CELL
 ADD
GERANEXTERNAL
CELL
MOD
BTS3900, BTS3900
GeranExternalCell CtrlMode Control Mode GERANEXTERNAL
LTE
CELL
LST
GERANEXTERNAL
CELL

ADD
GERANNCELL
DSP
GERANNCELL
DSP
BTS3900, BTS3900
GeranNcell LocalCellId Local cell ID GERANRIMINFO
LTE
LST GERANNCELL
MOD
GERANNCELL
RMV
GERANNCELL
 ADD
GERANNCELL
DSP
GERANNCELL
LST GERANNCELL
Mobile country BTS3900, BTS3900
GeranNcell Mcc MOD
code LTE
GERANNCELL
RMV
GERANNCELL
DSP
GERANRIMINFO

ADD
GERANNCELL
DSP
GERANNCELL
LST GERANNCELL
Mobile network BTS3900, BTS3900
GeranNcell Mnc MOD
code LTE
GERANNCELL
RMV
GERANNCELL
DSP
GERANRIMINFO

ADD
GERANNCELL
DSP
GERANNCELL
LST GERANNCELL
BTS3900, BTS3900
GeranNcell Lac Location area code MOD
LTE
GERANNCELL
RMV
GERANNCELL
DSP
GERANRIMINFO
ADD
GERANNCELL
DSP
GERANNCELL
LST GERANNCELL
BTS3900, BTS3900
GeranNcell GeranCellId GERAN cell ID MOD
LTE
GERANNCELL
RMV
GERANNCELL
DSP
GERANRIMINFO
 ADD
GERANNCELL
BTS3900, BTS3900
GeranNcell NoRmvFlag No remove indicator MOD
LTE
GERANNCELL
LST GERANNCELL
ADD
GERANNCELL
No handover BTS3900, BTS3900
GeranNcell NoHoFlag MOD
indicator LTE
GERANNCELL
LST GERANNCELL

ADD
GERANNCELL
Blind handover BTS3900, BTS3900
GeranNcell BlindHoPriority MOD
priority LTE
GERANNCELL
LST GERANNCELL

BTS3900, BTS3900
GeranNcell AnrFlag ANR flag LST GERANNCELL
LTE
 ADD
GERANNCELL
BTS3900, BTS3900
GeranNcell LocalCellName Local cell name MOD
LTE
GERANNCELL
LST GERANNCELL

ADD
GERANNCELL
NeighbourCellNam Neighbour cell BTS3900, BTS3900
GeranNcell MOD
e name LTE
GERANNCELL
LST GERANNCELL
 ADD
GERANNCELL
BTS3900, BTS3900
GeranNcell OverlapInd Overlap Indicator MOD
LTE
GERANNCELL
LST GERANNCELL

ADD
Neighbering Cell BTS3900, BTS3900
GeranNcell NCellMeasPriority GERANNCELL
Measure Priority LTE
LST GERANNCELL
 ADD
GERANNCELL
BTS3900, BTS3900
GeranNcell CtrlMode Control Mode MOD
LTE
GERANNCELL
LST GERANNCELL

BTS3900, BTS3900 DSP

GeranNcell eNodeBId eNodeB ID
LTE GERANRIMINFO

GRimBeginningTim BTS3900, BTS3900 DSP

GeranNcell Rim latest start time
e LTE GERANRIMINFO

GLastRimUpdating Rim latest update BTS3900, BTS3900 DSP

GeranNcell
Time time LTE GERANRIMINFO
 ADD
GERANNFREQGR
OUP
LST
GERANNFREQGR
BTS3900, BTS3900 OUP
GeranNfreqGroup LocalCellId Local cell ID
LTE MOD
GERANNFREQGR
OUP
RMV
GERANNFREQGR
OUP

ADD
GERANNFREQGR
OUP
LST
GERANNFREQGR
BTS3900, BTS3900 OUP
GeranNfreqGroup BcchGroupId BCCH group ID
LTE MOD
GERANNFREQGR
OUP
RMV
GERANNFREQGR
OUP

ADD
GERANNFREQGR
OUP
MOD
BTS3900, BTS3900
GeranNfreqGroup GeranVersion GERAN version GERANNFREQGR
LTE
OUP
LST
GERANNFREQGR
OUP

ADD
GERANNFREQGR
OUP
MOD
BTS3900, BTS3900
GeranNfreqGroup StartingArfcn Starting ARFCN GERANNFREQGR
LTE
OUP
LST
GERANNFREQGR
OUP
 ADD
GERANNFREQGR
OUP
MOD
BTS3900, BTS3900
GeranNfreqGroup BandIndicator Band indicator GERANNFREQGR
LTE
OUP
LST
GERANNFREQGR
OUP

ADD
GERANNFREQGR
OUP
Cell reselection MOD
CellReselPriorityCfg BTS3900, BTS3900
GeranNfreqGroup priority configure GERANNFREQGR
Ind LTE
indicator OUP
LST
GERANNFREQGR
OUP
 ADD
GERANNFREQGR
OUP
MOD
Cell reselection BTS3900, BTS3900
GeranNfreqGroup CellReselPriority GERANNFREQGR
priority LTE
OUP
LST
GERANNFREQGR
OUP

ADD
GERANNFREQGR
OUP
MOD
PMAX configure BTS3900, BTS3900
GeranNfreqGroup PmaxGeranCfgInd GERANNFREQGR
indicator LTE
OUP
LST
GERANNFREQGR
OUP
 ADD
GERANNFREQGR
OUP
MOD
BTS3900, BTS3900
GeranNfreqGroup PmaxGeran PMAX GERANNFREQGR
LTE
OUP
LST
GERANNFREQGR
OUP

ADD
GERANNFREQGR
OUP
MOD
Minimum required BTS3900, BTS3900
GeranNfreqGroup QRxLevMin GERANNFREQGR
RX level LTE
OUP
LST
GERANNFREQGR
OUP
 ADD
GERANNFREQGR
OUP
MOD
High priority BTS3900, BTS3900
GeranNfreqGroup ThreshXHigh GERANNFREQGR
threshold LTE
OUP
LST
GERANNFREQGR
OUP
 ADD
GERANNFREQGR
OUP
MOD
Lower priority BTS3900, BTS3900
GeranNfreqGroup ThreshXLow GERANNFREQGR
threshold LTE
OUP
LST
GERANNFREQGR
OUP

ADD
GERANNFREQGR
OUP
MOD
BTS3900, BTS3900
GeranNfreqGroup OffsetFreq Frequency offset GERANNFREQGR
LTE
OUP
LST
GERANNFREQGR
OUP
 ADD
GERANNFREQGR
OUP
MOD
NCC monitoring BTS3900, BTS3900
GeranNfreqGroup NccPermitted GERANNFREQGR
permitted LTE
OUP
LST
GERANNFREQGR
OUP

ADD
GERANNFREQGR
OUP
Frequency Priority MOD
BTS3900, BTS3900
GeranNfreqGroup ConnFreqPriority for Connected GERANNFREQGR
LTE
Mode OUP
LST
GERANNFREQGR
OUP
 ADD
GERANNFREQGR
OUP
MOD
ContinuCoverageIn Continuous BTS3900, BTS3900
GeranNfreqGroup GERANNFREQGR
dication Coverage Indication LTE
OUP
LST
GERANNFREQGR
OUP
 ADD
GERANNFREQGR
OUP
GERAN Freq Group MOD
GeranRanSharingIn BTS3900, BTS3900
GeranNfreqGroup RAN Sharing GERANNFREQGR
d LTE
Indication OUP
LST
GERANNFREQGR
OUP

ADD
GERANNFREQGR
OUP
MOD
BTS3900, BTS3900
GeranNfreqGroup AnrInd ANR Indication GERANNFREQGR
LTE
OUP
LST
GERANNFREQGR
OUP
 ADD
GERANNFREQGR
OUP
MOD
ANR Frequency BTS3900, BTS3900
GeranNfreqGroup FreqPriorityForAnr GERANNFREQGR
Priority LTE
OUP
LST
GERANNFREQGR
OUP

ADD
GERANNFREQGR
OUPARFCN
LST
GeranNfreqGroupA BTS3900, BTS3900
LocalCellId Local cell ID GERANNFREQGR
rfcn LTE
OUPARFCN
RMV
GERANNFREQGR
OUPARFCN

ADD
GERANNFREQGR
OUPARFCN
LST
GeranNfreqGroupA BTS3900, BTS3900
BcchGroupId BCCH group ID GERANNFREQGR
rfcn LTE
OUPARFCN
RMV
GERANNFREQGR
OUPARFCN
 ADD
GERANNFREQGR
OUPARFCN
LST
GeranNfreqGroupA BTS3900, BTS3900
GeranArfcn GERAN ARFCN GERANNFREQGR
rfcn LTE
OUPARFCN
RMV
GERANNFREQGR
OUPARFCN

ADD
INTRAFREQBLKC
ELL
LST
INTRAFREQBLKC
BTS3900, BTS3900 ELL
IntraFreqBlkCell LocalCellId Local cell ID
LTE MOD
INTRAFREQBLKC
ELL
RMV
INTRAFREQBLKC
ELL

ADD
INTRAFREQBLKC
ELL
LST
INTRAFREQBLKC
Start physical cell BTS3900, BTS3900 ELL
IntraFreqBlkCell PhyCellId
ID LTE MOD
INTRAFREQBLKC
ELL
RMV
INTRAFREQBLKC
ELL

ADD
INTRAFREQBLKC
ELL
MOD
BTS3900, BTS3900
IntraFreqBlkCell CellName Cell name INTRAFREQBLKC
LTE
ELL
LST
INTRAFREQBLKC
ELL

ADD
INTRAFREQBLKC
ELL
MOD
Physical cell ID BTS3900, BTS3900
IntraFreqBlkCell PhyCellIdRange INTRAFREQBLKC
range LTE
ELL
LST
INTRAFREQBLKC
ELL
 ADD
EUTRANINTRAFR
EQNCELL
DSP
EUTRANINTRAFR
EQNCELL
LST
EutranIntraFreqNC BTS3900, BTS3900
LocalCellId Local cell ID EUTRANINTRAFR
ell LTE
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
RMV
EUTRANINTRAFR
EQNCELL

ADD
EUTRANINTRAFR
EQNCELL
DSP
EUTRANINTRAFR
EQNCELL
LST
EutranIntraFreqNC Mobile country BTS3900, BTS3900
Mcc EUTRANINTRAFR
ell code LTE
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
RMV
EUTRANINTRAFR
EQNCELL

ADD
EUTRANINTRAFR
EQNCELL
DSP
EUTRANINTRAFR
EQNCELL
LST
EutranIntraFreqNC Mobile network BTS3900, BTS3900
Mnc EUTRANINTRAFR
ell code LTE
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
RMV
EUTRANINTRAFR
EQNCELL
 ADD
EUTRANINTRAFR
EQNCELL
DSP
EUTRANINTRAFR
EQNCELL
LST
EutranIntraFreqNC BTS3900, BTS3900
eNodeBId eNodeB ID EUTRANINTRAFR
ell LTE
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
RMV
EUTRANINTRAFR
EQNCELL

ADD
EUTRANINTRAFR
EQNCELL
DSP
EUTRANINTRAFR
EQNCELL
LST
EutranIntraFreqNC BTS3900, BTS3900
CellId Cell ID EUTRANINTRAFR
ell LTE
EQNCELL
MOD
EUTRANINTRAFR
EQNCELL
RMV
EUTRANINTRAFR
EQNCELL
 ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC BTS3900, BTS3900
CellIndividualOffset Cell individual offset EUTRANINTRAFR
ell LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL

ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC BTS3900, BTS3900
CellQoffset Cell offset EUTRANINTRAFR
ell LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL
 ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC No handover BTS3900, BTS3900
NoHoFlag EUTRANINTRAFR
ell indicator LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL

ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC BTS3900, BTS3900
NoRmvFlag No remove indicator EUTRANINTRAFR
ell LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL

LST
EutranIntraFreqNC BTS3900, BTS3900
AnrFlag ANR flag EUTRANINTRAFR
ell LTE
EQNCELL

ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC BTS3900, BTS3900
LocalCellName Local cell name EUTRANINTRAFR
ell LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL
 ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC NeighbourCellNam Neighbour cell BTS3900, BTS3900
EUTRANINTRAFR
ell e name LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL
 ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC Cell Measure BTS3900, BTS3900
CellMeasPriority EUTRANINTRAFR
ell Priority LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL
 ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC CellRangeExpansio Cell Range BTS3900, BTS3900
EUTRANINTRAFR
ell n Expansion LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL

ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC Neighbor Cell BTS3900, BTS3900
NCellClassLabel EUTRANINTRAFR
ell Classification Label LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL
 ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC BTS3900, BTS3900
CtrlMode Control Mode EUTRANINTRAFR
ell LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL

DSP
EutranIntraFreqNC BTS3900, BTS3900
PhyCellId Physical cell ID EUTRANINTRAFR
ell LTE
EQNCELL
 DSP
EutranIntraFreqNC BTS3900, BTS3900
DlEarfcn Downlink EARFCN EUTRANINTRAFR
ell LTE
EQNCELL

ADD
EUTRANINTRAFR
EQNCELL
MOD
EutranIntraFreqNC BTS3900, BTS3900
AttachCellSwitch Attach Cell Switch EUTRANINTRAFR
ell LTE
EQNCELL
LST
EUTRANINTRAFR
EQNCELL
 ADD
EUTRANINTERNF
REQ
LST
EUTRANINTERNF
BTS3900, BTS3900 REQ
EutranInterNFreq LocalCellId Local cell ID
LTE MOD
EUTRANINTERNF
REQ
RMV
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
LST
EUTRANINTERNF
BTS3900, BTS3900 REQ
EutranInterNFreq DlEarfcn Downlink EARFCN
LTE MOD
EUTRANINTERNF
REQ
RMV
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
Uplink EARFCN BTS3900, BTS3900
EutranInterNFreq UlEarfcnCfgInd EUTRANINTERNF
configure indicator LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
BTS3900, BTS3900
EutranInterNFreq UlEarfcn Uplink EARFCN EUTRANINTERNF
LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
Inter frequency cell MOD
CellReselPriorityCfg BTS3900, BTS3900
EutranInterNFreq resel priority EUTRANINTERNF
Ind LTE
configure indicator REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
Inter frequency cell BTS3900, BTS3900
EutranInterNFreq CellReselPriority EUTRANINTERNF
resel priority LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
EUTRAN BTS3900, BTS3900
EutranInterNFreq EutranReselTime EUTRANINTERNF
reselection time LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
Speed dependent
MOD
SpeedDependSPCf resel parameter BTS3900, BTS3900
EutranInterNFreq EUTRANINTERNF
gInd configuring LTE
REQ
indicator
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
Scaling factor of
MOD
TReselEutranSfMe treseleutran in BTS3900, BTS3900
EutranInterNFreq EUTRANINTERNF
dium medium mobility LTE
REQ
state
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
Scaling factor of MOD
TReselEutranSfHig BTS3900, BTS3900
EutranInterNFreq treseleutran in high EUTRANINTERNF
h LTE
mobility state REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
Measurement BTS3900, BTS3900
EutranInterNFreq MeasBandWidth EUTRANINTERNF
bandwidth LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
BTS3900, BTS3900
EutranInterNFreq QoffsetFreq Frequency offset EUTRANINTERNF
LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
Inter frequency high BTS3900, BTS3900
EutranInterNFreq ThreshXhigh EUTRANINTERNF
priority threshold LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
Inter frequency MOD
BTS3900, BTS3900
EutranInterNFreq ThreshXlow lower priority EUTRANINTERNF
LTE
threshold REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
Minimum required BTS3900, BTS3900
EutranInterNFreq QRxLevMin EUTRANINTERNF
RX level LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
PMAX configure BTS3900, BTS3900
EutranInterNFreq PmaxCfgInd EUTRANINTERNF
indicator LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
BTS3900, BTS3900
EutranInterNFreq Pmax PMAX EUTRANINTERNF
LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
Neighbor Cell BTS3900, BTS3900
EutranInterNFreq NeighCellConfig EUTRANINTERNF
Configuration LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
PresenceAntennaP Presence antenna BTS3900, BTS3900
EutranInterNFreq EUTRANINTERNF
ort1 port1 LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
InterFreqHoEventTy Inter-Freq HO BTS3900, BTS3900
EutranInterNFreq EUTRANINTERNF
pe trigger Event Type LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
Inter frequency high MOD
BTS3900, BTS3900
EutranInterNFreq ThreshXhighQ priority RSRQ EUTRANINTERNF
LTE
threshold REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
Inter frequency low MOD
BTS3900, BTS3900
EutranInterNFreq ThreshXlowQ priority RSRQ EUTRANINTERNF
LTE
threshold REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
Minimum RX signal MOD
BTS3900, BTS3900
EutranInterNFreq QqualMinCfgInd quality configuration EUTRANINTERNF
LTE
indicator REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
Minimum RX signal BTS3900, BTS3900
EutranInterNFreq QqualMin EUTRANINTERNF
quality LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
Frequency Priority MOD
BTS3900, BTS3900
EutranInterNFreq ConnFreqPriority for Connected EUTRANINTERNF
LTE
Mode REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
Mobility Load MOD
BTS3900, BTS3900
EutranInterNFreq MlbTargetInd Balancing Target EUTRANINTERNF
LTE
Indicator REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
Frequency Priority MOD
FreqPriBasedHoMe BTS3900, BTS3900
EutranInterNFreq Based Ho Measure EUTRANINTERNF
asFlag LTE
Flag REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
IdleMlbUERelease Idle MLB UE BTS3900, BTS3900
EutranInterNFreq EUTRANINTERNF
Ratio Release Ratio LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
MLB Frequency BTS3900, BTS3900
EutranInterNFreq MlbFreqPriority EUTRANINTERNF
Priority LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
Frequency Offset MOD
BTS3900, BTS3900
EutranInterNFreq QoffsetFreqConn for Connected EUTRANINTERNF
LTE
Mode REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
Measurement BTS3900, BTS3900
EutranInterNFreq MeasFreqPriority EUTRANINTERNF
Frequency Priority LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
Cov-based Inter- MOD
BTS3900, BTS3900
EutranInterNFreq IfHoThdRsrpOffset Freq HO Thd RSRP EUTRANINTERNF
LTE
Offset REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
Inter-Freq Mlb MOD
BTS3900, BTS3900
EutranInterNFreq IfMlbThdRsrpOffset Threshold RSRP EUTRANINTERNF
LTE
Offset REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
BTS3900, BTS3900
EutranInterNFreq MasterBandFlag Master Band Flag EUTRANINTERNF
LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
Inter Frequency MOD
InterFreqRanSharin BTS3900, BTS3900
EutranInterNFreq RAN Sharing EUTRANINTERNF
gInd LTE
Indication REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
InterFreqHighSpee Inter-frequency BTS3900, BTS3900
EutranInterNFreq EUTRANINTERNF
dFlag Highspeed Flag LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
BTS3900, BTS3900
EutranInterNFreq AnrInd ANR Indication EUTRANINTERNF
LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
BTS3900, BTS3900
EutranInterNFreq VoipPriority Voip Priority EUTRANINTERNF
LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
BTS3900, BTS3900
EutranInterNFreq PsPriority PS Service Priority EUTRANINTERNF
LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
VoLTE HO Target MOD
BTS3900, BTS3900
EutranInterNFreq VolteHoTargetInd Frequency EUTRANINTERNF
LTE
Indication REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
ANR Frequency BTS3900, BTS3900
EutranInterNFreq FreqPriorityForAnr EUTRANINTERNF
Priority LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
Backoff Target BTS3900, BTS3900
EutranInterNFreq BackoffTargetInd EUTRANINTERNF
Indicator LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MLB Inter-Freq MOD
MlbInterFreqHoEve BTS3900, BTS3900
EutranInterNFreq Handover Event EUTRANINTERNF
ntType LTE
Type REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
Mobility Target BTS3900, BTS3900
EutranInterNFreq MobilityTargetInd EUTRANINTERNF
Indicator LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
MlbInterFreqEffiRati MLB Inter-Freq BTS3900, BTS3900
EutranInterNFreq EUTRANINTERNF
o Efficiency Ratio LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
EUTRANINTERNF
REQ
MOD
UlTrafficMlbTargetIn UL Traffic MLB BTS3900, BTS3900
EutranInterNFreq EUTRANINTERNF
d Target Indicator LTE
REQ
LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
UL Traffic MLB BTS3900, BTS3900
EutranInterNFreq UlTrafficMlbPriority EUTRANINTERNF
Priority LTE
REQ
LST
EUTRANINTERNF
REQ

MOD
EUTRANINTERNF
MlbInterFreqHoA3O MLB Inter-Freq BTS3900, BTS3900 REQ
EutranInterNFreq
ffset Handover A3 Offset LTE LST
EUTRANINTERNF
REQ
 ADD
EUTRANINTERNF
REQ
MOD
BTS3900, BTS3900
EutranInterNFreq CtrlMode Control Mode EUTRANINTERNF
LTE
REQ
LST
EUTRANINTERNF
REQ

ADD
INTERFREQBLKC
ELL
LST
INTERFREQBLKC
BTS3900, BTS3900 ELL
InterFreqBlkCell LocalCellId Local cell ID
LTE MOD
INTERFREQBLKC
ELL
RMV
INTERFREQBLKC
ELL
 ADD
INTERFREQBLKC
ELL
LST
INTERFREQBLKC
BTS3900, BTS3900 ELL
InterFreqBlkCell DlEarfcn Downlink EARFCN
LTE MOD
INTERFREQBLKC
ELL
RMV
INTERFREQBLKC
ELL

ADD
INTERFREQBLKC
ELL
LST
INTERFREQBLKC
Start physical cell BTS3900, BTS3900 ELL
InterFreqBlkCell PhyCellId
ID LTE MOD
INTERFREQBLKC
ELL
RMV
INTERFREQBLKC
ELL

ADD
INTERFREQBLKC
ELL
MOD
BTS3900, BTS3900
InterFreqBlkCell CellName Cell name INTERFREQBLKC
LTE
ELL
LST
INTERFREQBLKC
ELL

ADD
INTERFREQBLKC
ELL
MOD
Physical cell ID BTS3900, BTS3900
InterFreqBlkCell PhyCellIdRange INTERFREQBLKC
range LTE
ELL
LST
INTERFREQBLKC
ELL
 ADD
EUTRANINTERFR
EQNCELL
DSP
EUTRANINTERFR
EQNCELL
LST
EutranInterFreqNC BTS3900, BTS3900
LocalCellId Local cell ID EUTRANINTERFR
ell LTE
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
RMV
EUTRANINTERFR
EQNCELL

ADD
EUTRANINTERFR
EQNCELL
DSP
EUTRANINTERFR
EQNCELL
LST
EutranInterFreqNC Mobile country BTS3900, BTS3900
Mcc EUTRANINTERFR
ell code LTE
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
RMV
EUTRANINTERFR
EQNCELL

ADD
EUTRANINTERFR
EQNCELL
DSP
EUTRANINTERFR
EQNCELL
LST
EutranInterFreqNC Mobile network BTS3900, BTS3900
Mnc EUTRANINTERFR
ell code LTE
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
RMV
EUTRANINTERFR
EQNCELL
 ADD
EUTRANINTERFR
EQNCELL
DSP
EUTRANINTERFR
EQNCELL
LST
EutranInterFreqNC BTS3900, BTS3900
eNodeBId eNodeB ID EUTRANINTERFR
ell LTE
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
RMV
EUTRANINTERFR
EQNCELL

ADD
EUTRANINTERFR
EQNCELL
DSP
EUTRANINTERFR
EQNCELL
LST
EutranInterFreqNC BTS3900, BTS3900
CellId Cell ID EUTRANINTERFR
ell LTE
EQNCELL
MOD
EUTRANINTERFR
EQNCELL
RMV
EUTRANINTERFR
EQNCELL
 ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC BTS3900, BTS3900
CellIndividualOffset Cell individual offset EUTRANINTERFR
ell LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL

ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC BTS3900, BTS3900
CellQoffset Cell offset EUTRANINTERFR
ell LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL
 ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC No handover BTS3900, BTS3900
NoHoFlag EUTRANINTERFR
ell indicator LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL

ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC BTS3900, BTS3900
NoRmvFlag No remove indicator EUTRANINTERFR
ell LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL

ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC Blind handover BTS3900, BTS3900
BlindHoPriority EUTRANINTERFR
ell Priority LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL
 LST
EutranInterFreqNC BTS3900, BTS3900
AnrFlag ANR flag EUTRANINTERFR
ell LTE
EQNCELL

ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC BTS3900, BTS3900
LocalCellName Local cell name EUTRANINTERFR
ell LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL

ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC NeighbourCellNam Neighbour cell BTS3900, BTS3900
EUTRANINTERFR
ell e name LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL
 ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC Cell Measure BTS3900, BTS3900
CellMeasPriority EUTRANINTERFR
ell Priority LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL
 ADD
EUTRANINTERFR
EQNCELL
MOD
EUTRANINTERFR
EutranInterFreqNC BTS3900, BTS3900 EQNCELL
OverlapInd Overlap Indicator
ell LTE DSP
EUTRANINTERFR
EQNCELL
LST
EUTRANINTERFR
EQNCELL

ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC BTS3900, BTS3900
OverlapRange Overlap Range EUTRANINTERFR
ell LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL
 ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC Neighbor Cell BTS3900, BTS3900
NCellClassLabel EUTRANINTERFR
ell Classification Label LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL

ADD
EUTRANINTERFR
EQNCELL
MOD
EutranInterFreqNC BTS3900, BTS3900
CtrlMode Control Mode EUTRANINTERFR
ell LTE
EQNCELL
LST
EUTRANINTERFR
EQNCELL
 DSP
EutranInterFreqNC BTS3900, BTS3900
PhyCellId Physical cell ID EUTRANINTERFR
ell LTE
EQNCELL

DSP
EutranInterFreqNC BTS3900, BTS3900
DlEarfcn Downlink EARFCN EUTRANINTERFR
ell LTE
EQNCELL

ADD
EUTRANEXTERNA
LCELL
ADD
EUTRANEXTERNA
LCELLBAND
LST
EUTRANEXTERNA
LCELL
LST
Mobile country BTS3900, BTS3900
EutranExternalCell Mcc EUTRANEXTERNA
code LTE
LCELLBAND
MOD
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELLBAND
 ADD
EUTRANEXTERNA
LCELL
ADD
EUTRANEXTERNA
LCELLBAND
LST
EUTRANEXTERNA
LCELL
LST
Mobile network BTS3900, BTS3900
EutranExternalCell Mnc EUTRANEXTERNA
code LTE
LCELLBAND
MOD
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELLBAND

ADD
EUTRANEXTERNA
LCELL
ADD
EUTRANEXTERNA
LCELLBAND
LST
EUTRANEXTERNA
LCELL
LST
BTS3900, BTS3900
EutranExternalCell eNodeBId eNodeB ID EUTRANEXTERNA
LTE
LCELLBAND
MOD
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELLBAND
 ADD
EUTRANEXTERNA
LCELL
ADD
EUTRANEXTERNA
LCELLBAND
LST
EUTRANEXTERNA
LCELL
LST
BTS3900, BTS3900
EutranExternalCell CellId Cell ID EUTRANEXTERNA
LTE
LCELLBAND
MOD
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELL
RMV
EUTRANEXTERNA
LCELLBAND

ADD
EUTRANEXTERNA
LCELL
MOD
BTS3900, BTS3900
EutranExternalCell DlEarfcn Downlink EARFCN EUTRANEXTERNA
LTE
LCELL
LST
EUTRANEXTERNA
LCELL

ADD
EUTRANEXTERNA
LCELL
MOD
Uplink EARFCN BTS3900, BTS3900
EutranExternalCell UlEarfcnCfgInd EUTRANEXTERNA
indicator LTE
LCELL
LST
EUTRANEXTERNA
LCELL
 ADD
EUTRANEXTERNA
LCELL
MOD
BTS3900, BTS3900
EutranExternalCell UlEarfcn Uplink EARFCN EUTRANEXTERNA
LTE
LCELL
LST
EUTRANEXTERNA
LCELL

ADD
EUTRANEXTERNA
LCELL
MOD
BTS3900, BTS3900
EutranExternalCell PhyCellId Physical cell ID EUTRANEXTERNA
LTE
LCELL
LST
EUTRANEXTERNA
LCELL

ADD
EUTRANEXTERNA
LCELL
MOD
BTS3900, BTS3900
EutranExternalCell Tac Tracking area code EUTRANEXTERNA
LTE
LCELL
LST
EUTRANEXTERNA
LCELL
 ADD
EUTRANEXTERNA
LCELL
MOD
BTS3900, BTS3900
EutranExternalCell CellName Cell name EUTRANEXTERNA
LTE
LCELL
LST
EUTRANEXTERNA
LCELL
 ADD
EUTRANEXTERNA
LCELLBAND
LST
EutranExternalCell External E-UTRAN BTS3900, BTS3900
EutranExternalCell EUTRANEXTERNA
SlaveBand Cell Slave Band LTE
LCELLBAND
RMV
EUTRANEXTERNA
LCELLBAND

ADD
EUTRANEXTERNA
LCELLBAND
LST
MultiBand.FreqBan BTS3900, BTS3900
EutranExternalCell Frequency band EUTRANEXTERNA
d LTE
LCELLBAND
RMV
EUTRANEXTERNA
LCELLBAND
 ADD
EUTRANEXTERNA
LCELL
MOD
Roaming Area BTS3900, BTS3900
EutranExternalCell RoamingAreaHoInd EUTRANEXTERNA
Handover Indicator LTE
LCELL
LST
EUTRANEXTERNA
LCELL
 ADD
EUTRANEXTERNA
LCELL
MOD
BTS3900, BTS3900
EutranExternalCell SpecifiedCellFlag Specified Cell Flag EUTRANEXTERNA
LTE
LCELL
LST
EUTRANEXTERNA
LCELL
 ADD
EUTRANEXTERNA
LCELL
MOD
BTS3900, BTS3900
EutranExternalCell CtrlMode Control Mode EUTRANEXTERNA
LTE
LCELL
LST
EUTRANEXTERNA
LCELL

ADD
CDMA2000BCSCE
LLOP
LST
CDMA2000BCSCE
Cdma2000BcSCell BTS3900, BTS3900 LLOP
LocalCellId Local cell ID
Op LTE MOD
CDMA2000BCSCE
LLOP
RMV
CDMA2000BCSCE
LLOP
 ADD
CDMA2000BCSCE
LLOP
LST
CDMA2000BCSCE
Cdma2000BcSCell BTS3900, BTS3900 LLOP
BandClass Band class
Op LTE MOD
CDMA2000BCSCE
LLOP
RMV
CDMA2000BCSCE
LLOP

ADD
CDMA2000BCSCE
LLOP
LST
CDMA2000BCSCE
Cdma2000BcSCell BTS3900, BTS3900 LLOP
CnOperatorID Cn operator ID
Op LTE MOD
CDMA2000BCSCE
LLOP
RMV
CDMA2000BCSCE
LLOP

ADD
CDMA2000BCSCE
LLOP
CDMA2000 1xRTT MOD
Cdma2000BcSCell Cdma1XrttCellRese BTS3900, BTS3900
dedicated priority CDMA2000BCSCE
Op lPriInd LTE
configure indicator LLOP
LST
CDMA2000BCSCE
LLOP
 ADD
CDMA2000BCSCE
LLOP
CDMA2000 1xRTT MOD
Cdma2000BcSCell Cdma1XrttCellRese BTS3900, BTS3900
Cell Reselection CDMA2000BCSCE
Op lDediPri LTE
Dedicated Priority LLOP
LST
CDMA2000BCSCE
LLOP

ADD
CDMA2000BCSCE
LLOP
CDMA2000 HRPD MOD
Cdma2000BcSCell HrpdCellReselDedi BTS3900, BTS3900
dedicated priority CDMA2000BCSCE
Op PriCfgInd LTE
configure indicator LLOP
LST
CDMA2000BCSCE
LLOP
 ADD
CDMA2000BCSCE
LLOP
CDMA2000 HRPD MOD
Cdma2000BcSCell HrpdCellReselDedi BTS3900, BTS3900
Cell Reselection CDMA2000BCSCE
Op Pri LTE
Dedicated Priority LLOP
LST
CDMA2000BCSCE
LLOP

ADD
EUTRANNFREQR
ANSHARE
LST
EUTRANNFREQR
EutranNFreqRanSh BTS3900, BTS3900 ANSHARE
LocalCellId Local cell ID
are LTE MOD
EUTRANNFREQR
ANSHARE
RMV
EUTRANNFREQR
ANSHARE
 ADD
EUTRANNFREQR
ANSHARE
LST
EUTRANNFREQR
EutranNFreqRanSh BTS3900, BTS3900 ANSHARE
DlEarfcn Downlink EARFCN
are LTE MOD
EUTRANNFREQR
ANSHARE
RMV
EUTRANNFREQR
ANSHARE

ADD
EUTRANNFREQR
ANSHARE
LST
EUTRANNFREQR
EutranNFreqRanSh Mobile country BTS3900, BTS3900 ANSHARE
Mcc
are code LTE MOD
EUTRANNFREQR
ANSHARE
RMV
EUTRANNFREQR
ANSHARE

ADD
EUTRANNFREQR
ANSHARE
LST
EUTRANNFREQR
EutranNFreqRanSh Mobile network BTS3900, BTS3900 ANSHARE
Mnc
are code LTE MOD
EUTRANNFREQR
ANSHARE
RMV
EUTRANNFREQR
ANSHARE
 ADD
EUTRANNFREQR
ANSHARE
Cell reselection MOD
EutranNFreqRanSh CellReselPriorityCfg BTS3900, BTS3900
priority configure EUTRANNFREQR
are Ind LTE
indicator ANSHARE
LST
EUTRANNFREQR
ANSHARE

ADD
EUTRANNFREQR
ANSHARE
MOD
EutranNFreqRanSh Cell reselection BTS3900, BTS3900
CellReselPriority EUTRANNFREQR
are priority LTE
ANSHARE
LST
EUTRANNFREQR
ANSHARE

ADD
EUTRANNFREQS
CELLOP
LST
EUTRANNFREQS
EutranNFreqSCellO BTS3900, BTS3900 CELLOP
LocalCellId Local cell ID
p LTE MOD
EUTRANNFREQS
CELLOP
RMV
EUTRANNFREQS
CELLOP
 ADD
EUTRANNFREQS
CELLOP
LST
EUTRANNFREQS
EutranNFreqSCellO BTS3900, BTS3900 CELLOP
DlEarfcn Downlink EARFCN
p LTE MOD
EUTRANNFREQS
CELLOP
RMV
EUTRANNFREQS
CELLOP

ADD
EUTRANNFREQS
CELLOP
LST
EUTRANNFREQS
EutranNFreqSCellO BTS3900, BTS3900 CELLOP
CnOperatorID Cn operator ID
p LTE MOD
EUTRANNFREQS
CELLOP
RMV
EUTRANNFREQS
CELLOP

ADD
EUTRANNFREQS
CELLOP
Cell reselection MOD
EutranNFreqSCellO CellReselDediPriCf BTS3900, BTS3900
dedicated priority EUTRANNFREQS
p gInd LTE
configure indicator CELLOP
LST
EUTRANNFREQS
CELLOP
 ADD
EUTRANNFREQS
CELLOP
MOD
EutranNFreqSCellO Cell reselection BTS3900, BTS3900
CellReselDediPri EUTRANNFREQS
p dedicated priority LTE
CELLOP
LST
EUTRANNFREQS
CELLOP

ADD
GERANNFGROUP
SCELLOP
LST
GERANNFGROUP
GeranNFGroupSCe BTS3900, BTS3900 SCELLOP
LocalCellId Local cell ID
llOp LTE MOD
GERANNFGROUP
SCELLOP
RMV
GERANNFGROUP
SCELLOP
 ADD
GERANNFGROUP
SCELLOP
LST
GERANNFGROUP
GeranNFGroupSCe BTS3900, BTS3900 SCELLOP
BcchGroupId BCCH group ID
llOp LTE MOD
GERANNFGROUP
SCELLOP
RMV
GERANNFGROUP
SCELLOP

ADD
GERANNFGROUP
SCELLOP
LST
GERANNFGROUP
GeranNFGroupSCe BTS3900, BTS3900 SCELLOP
CnOperatorID Cn operator ID
llOp LTE MOD
GERANNFGROUP
SCELLOP
RMV
GERANNFGROUP
SCELLOP

ADD
GERANNFGROUP
SCELLOP
Cell reselection MOD
GeranNFGroupSCe CellReselDediPriCf BTS3900, BTS3900
dedicated priority GERANNFGROUP
llOp gInd LTE
configure indicator SCELLOP
LST
GERANNFGROUP
SCELLOP
 ADD
GERANNFGROUP
SCELLOP
MOD
GeranNFGroupSCe Cell reselection BTS3900, BTS3900
CellReselDediPri GERANNFGROUP
llOp dedicated priority LTE
SCELLOP
LST
GERANNFGROUP
SCELLOP

GERANRANSHAR
E
LST
GERANRANSHAR
BTS3900, BTS3900 E
GeranRanShare LocalCellId Local cell ID
LTE MOD
GERANRANSHAR
E
RMV
GERANRANSHAR
E
LST
GERANRANSHAR
BTS3900, BTS3900 E
GeranRanShare BcchGroupId BCCH group ID
LTE MOD
GERANRANSHAR
E
RMV
GERANRANSHAR
 ADD
GERANRANSHAR
E
LST
GERANRANSHAR
Mobile country BTS3900, BTS3900 E
GeranRanShare Mcc
code LTE MOD
GERANRANSHAR
E
RMV
GERANRANSHAR
E

ADD
GERANRANSHAR
E
LST
GERANRANSHAR
Mobile network BTS3900, BTS3900 E
GeranRanShare Mnc
code LTE MOD
GERANRANSHAR
E
RMV
GERANRANSHAR
E

ADD
GERANRANSHAR
E
Cell reselection MOD
CellReselPriorityCfg BTS3900, BTS3900
GeranRanShare priority configure GERANRANSHAR
Ind LTE
indicator E
LST
GERANRANSHAR
E
 ADD
GERANRANSHAR
E
MOD
Cell reselection BTS3900, BTS3900
GeranRanShare CellReselPriority GERANRANSHAR
priority LTE
E
LST
GERANRANSHAR
E

UTRANNCELL
DSP
UTRANNCELL
DSP
UTRANRIMINFO
BTS3900, BTS3900 DSP
UtranNCell LocalCellId Local cell ID
LTE UTRANRIMLOADI
NFO
LST UTRANNCELL
MOD
UTRANNCELL
RMV
 ADD
UTRANNCELL
DSP
UTRANNCELL
LST UTRANNCELL
MOD
Mobile country BTS3900, BTS3900 UTRANNCELL
UtranNCell Mcc
code LTE RMV
UTRANNCELL
DSP
UTRANRIMINFO
DSP
UTRANRIMLOADI
NFO

ADD
UTRANNCELL
DSP
UTRANNCELL
LST UTRANNCELL
MOD
Mobile network BTS3900, BTS3900 UTRANNCELL
UtranNCell Mnc
code LTE RMV
UTRANNCELL
DSP
UTRANRIMINFO
DSP
UTRANRIMLOADI
NFO
 ADD
UTRANNCELL
DSP
UTRANNCELL
LST UTRANNCELL
MOD
BTS3900, BTS3900 UTRANNCELL
UtranNCell RncId RNC ID
LTE RMV
UTRANNCELL
DSP
UTRANRIMINFO
DSP
UTRANRIMLOADI
NFO
 ADD
UTRANNCELL
DSP
UTRANNCELL
LST UTRANNCELL
MOD
BTS3900, BTS3900 UTRANNCELL
UtranNCell CellId RNC cell ID
LTE RMV
UTRANNCELL
DSP
UTRANRIMINFO
DSP
UTRANRIMLOADI
NFO

ADD
UTRANNCELL
No handover BTS3900, BTS3900
UtranNCell NoHoFlag MOD
indicator LTE
UTRANNCELL
LST UTRANNCELL

ADD
UTRANNCELL
BTS3900, BTS3900
UtranNCell NoRmvFlag No remove indicator MOD
LTE
UTRANNCELL
LST UTRANNCELL

BTS3900, BTS3900
UtranNCell AnrFlag ANR flag LST UTRANNCELL
LTE
 ADD
UTRANNCELL
Blind handover BTS3900, BTS3900
UtranNCell BlindHoPriority MOD
priority LTE
UTRANNCELL
LST UTRANNCELL

ADD
UTRANNCELL
Cell Measure BTS3900, BTS3900
UtranNCell CellMeasPriority MOD
Priority LTE
UTRANNCELL
LST UTRANNCELL
 ADD
UTRANNCELL
BTS3900, BTS3900
UtranNCell OverlapInd Overlap Indicator MOD
LTE
UTRANNCELL
LST UTRANNCELL
 ADD
Neighbering Cell BTS3900, BTS3900
UtranNCell NCellMeasPriority UTRANNCELL
Measure Priority LTE
LST UTRANNCELL
 ADD
UTRANNCELL
BTS3900, BTS3900
UtranNCell LocalCellName Local cell name MOD
LTE
UTRANNCELL
LST UTRANNCELL

ADD
UTRANNCELL
NeighbourCellNam Neighbour cell BTS3900, BTS3900
UtranNCell MOD
e name LTE
UTRANNCELL
LST UTRANNCELL
 ADD
UTRANNCELL
BTS3900, BTS3900
UtranNCell CtrlMode Control Mode MOD
LTE
UTRANNCELL
LST UTRANNCELL

DSP
UTRANRIMINFO
BTS3900, BTS3900
UtranNCell eNodeBId eNodeB ID DSP
LTE
UTRANRIMLOADI
NFO

URimBeginningTim BTS3900, BTS3900 DSP

UtranNCell Rim latest start time
e LTE UTRANRIMINFO

ULastRimUpdating RIM latest update BTS3900, BTS3900 DSP

UtranNCell
Time time LTE UTRANRIMINFO
 DSP
ULastRimLoadUpd cell load RIM latest BTS3900, BTS3900
UtranNCell UTRANRIMLOADI
atingTime update time LTE
NFO

DSP
URimLoadStartTim Cell load Rim latest BTS3900, BTS3900
UtranNCell UTRANRIMLOADI
e start time LTE
NFO

DSP
UMTS cell load BTS3900, BTS3900
UtranNCell URimLoadStatus UTRANRIMLOADI
status LTE
NFO

ADD
UTRANNFREQSC
ELLOP
LST
UTRANNFREQSC
BTS3900, BTS3900 ELLOP
UtranNFreqSCellOp LocalCellId Local cell ID
LTE MOD
UTRANNFREQSC
ELLOP
RMV
UTRANNFREQSC
ELLOP

ADD
UTRANNFREQSC
ELLOP
LST
UTRANNFREQSC
BTS3900, BTS3900 ELLOP
UtranNFreqSCellOp UtranDlArfcn Downlink UARFCN
LTE MOD
UTRANNFREQSC
ELLOP
RMV
UTRANNFREQSC
ELLOP
 ADD
UTRANNFREQSC
ELLOP
LST
UTRANNFREQSC
BTS3900, BTS3900 ELLOP
UtranNFreqSCellOp CnOperatorID Cn operator ID
LTE MOD
UTRANNFREQSC
ELLOP
RMV
UTRANNFREQSC
ELLOP

ADD
UTRANNFREQSC
ELLOP
Cell reselection MOD
CellReselDediPriCf BTS3900, BTS3900
UtranNFreqSCellOp dedicated priority UTRANNFREQSC
gInd LTE
configure indicator ELLOP
LST
UTRANNFREQSC
ELLOP

ADD
UTRANNFREQSC
ELLOP
MOD
Cell reselection BTS3900, BTS3900
UtranNFreqSCellOp CellReselDediPri UTRANNFREQSC
dedicated priority LTE
ELLOP
LST
UTRANNFREQSC
ELLOP
 UTRANRANSHAR
E
LST
UTRANRANSHAR
BTS3900, BTS3900 E
UtranRanShare LocalCellId Local cell ID
LTE MOD
UTRANRANSHAR
E
RMV
UTRANRANSHAR

ADD
UTRANRANSHAR
E
LST
UTRANRANSHAR
BTS3900, BTS3900 E
UtranRanShare UtranDlArfcn Downlink UARFCN
LTE MOD
UTRANRANSHAR
E
RMV
UTRANRANSHAR
E
 ADD
UTRANRANSHAR
E
LST
UTRANRANSHAR
Mobile country BTS3900, BTS3900 E
UtranRanShare Mcc
code LTE MOD
UTRANRANSHAR
E
RMV
UTRANRANSHAR
E

ADD
UTRANRANSHAR
E
LST
UTRANRANSHAR
Mobile network BTS3900, BTS3900 E
UtranRanShare Mnc
code LTE MOD
UTRANRANSHAR
E
RMV
UTRANRANSHAR
E

ADD
UTRANRANSHAR
E
Cell reselection MOD
CellReselPriorityCfg BTS3900, BTS3900
UtranRanShare priority configure UTRANRANSHAR
Ind LTE
indicator E
LST
UTRANRANSHAR
E
 ADD
UTRANRANSHAR
E
MOD
Cell reselection BTS3900, BTS3900
UtranRanShare CellReselPriority UTRANRANSHAR
priority LTE
E
LST
UTRANRANSHAR
E

ADD
UTRANNFREQ
LST
BTS3900, BTS3900 UTRANNFREQ
UtranNFreq LocalCellId Local cell ID
LTE MOD
UTRANNFREQ
RMV
UTRANNFREQ
 ADD
UTRANNFREQ
LST
BTS3900, BTS3900 UTRANNFREQ
UtranNFreq UtranDlArfcn Downlink UARFCN
LTE MOD
UTRANNFREQ
RMV
UTRANNFREQ

ADD
UTRANNFREQ
BTS3900, BTS3900 MOD
UtranNFreq UtranVersion UTRAN version
LTE UTRANNFREQ
LST
UTRANNFREQ
ADD
UTRANNFREQ
UTRAN cell type BTS3900, BTS3900 MOD
UtranNFreq UtranFddTddType
indicator LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
Uplink UARFCN BTS3900, BTS3900 MOD
UtranNFreq UtranUlArfcnCfgInd
indicator LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
BTS3900, BTS3900 MOD
UtranNFreq UtranUlArfcn Uplink UARFCN
LTE UTRANNFREQ
LST
UTRANNFREQ

ADD
UTRANNFREQ
CellReselPriorityCfg Reselection priority BTS3900, BTS3900 MOD
UtranNFreq
Ind configure indicator LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
Cell reselection BTS3900, BTS3900 MOD
UtranNFreq CellReselPriority
priority LTE UTRANNFREQ
LST
UTRANNFREQ

ADD
UTRANNFREQ
BTS3900, BTS3900 MOD
UtranNFreq PmaxUtran PMAX
LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
BTS3900, BTS3900 MOD
UtranNFreq OffsetFreq Frequency offset
LTE UTRANNFREQ
LST
UTRANNFREQ

ADD
UTRANNFREQ
Minimum required BTS3900, BTS3900 MOD
UtranNFreq Qqualmin
quality level LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
Minimum required BTS3900, BTS3900 MOD
UtranNFreq QRxLevMin
RX level LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
UTRAN high priority BTS3900, BTS3900 MOD
UtranNFreq ThreshXHigh
threshold LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
UTRAN lower BTS3900, BTS3900 MOD
UtranNFreq ThreshXLow
priority threshold LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
UTRAN high priority BTS3900, BTS3900 MOD
UtranNFreq ThreshXHighQ
RSRQ threshold LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
UTRAN low priority BTS3900, BTS3900 MOD
UtranNFreq ThreshXLowQ
RSRQ threshold LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
BTS3900, BTS3900 MOD
UtranNFreq PsPriority PS service priority
LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
BTS3900, BTS3900 MOD
UtranNFreq CsPriority CS service priority
LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
Frequency Priority
BTS3900, BTS3900 MOD
UtranNFreq ConnFreqPriority for Connected
LTE UTRANNFREQ
Mode
LST
UTRANNFREQ
 ADD
UTRANNFREQ
CS and PS mixed BTS3900, BTS3900 MOD
UtranNFreq CsPsMixedPriority
priority LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
ContinuCoverageIn Continuous BTS3900, BTS3900 MOD
UtranNFreq
dication Coverage Indication LTE UTRANNFREQ
LST
UTRANNFREQ

ADD
UTRANNFREQ
MLB Frequency BTS3900, BTS3900 MOD
UtranNFreq MlbFreqPriority
Priority LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
BTS3900, BTS3900 MOD
UtranNFreq MasterBandFlag Master Band Flag
LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
UTRAN Frequency
UtranRanSharingIn BTS3900, BTS3900 MOD
UtranNFreq RAN Sharing
d LTE UTRANNFREQ
Indication
LST
UTRANNFREQ

ADD
UTRANNFREQ
BTS3900, BTS3900 MOD
UtranNFreq AnrInd ANR Indication
LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
SRVCC Service BTS3900, BTS3900 MOD
UtranNFreq SrvccPriority
Priority LTE UTRANNFREQ
LST
UTRANNFREQ

ADD
UTRANNFREQ
UMTS/LTE Shared BTS3900, BTS3900 MOD
UtranNFreq ULSharedFreqInd
Frequency Indicator LTE UTRANNFREQ
LST
UTRANNFREQ
 ADD
UTRANNFREQ
ANR Frequency BTS3900, BTS3900 MOD
UtranNFreq FreqPriorityForAnr
Priority LTE UTRANNFREQ
LST
UTRANNFREQ

ADD
UTRANEXTERNAL
CELL
ADD
UTRANEXTERNAL
CELLBAND
LST
UTRANEXTERNAL
CELL
LST
Mobile country BTS3900, BTS3900
UtranExternalCell Mcc UTRANEXTERNAL
code LTE
CELLBAND
MOD
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELLBAND
 ADD
UTRANEXTERNAL
CELL
ADD
UTRANEXTERNAL
CELLBAND
LST
UTRANEXTERNAL
CELL
LST
Mobile network BTS3900, BTS3900
UtranExternalCell Mnc UTRANEXTERNAL
code LTE
CELLBAND
MOD
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELLBAND

ADD
UTRANEXTERNAL
CELL
ADD
UTRANEXTERNAL
CELLBAND
LST
UTRANEXTERNAL
CELL
LST
BTS3900, BTS3900
UtranExternalCell RncId RNC ID UTRANEXTERNAL
LTE
CELLBAND
MOD
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELLBAND
 ADD
UTRANEXTERNAL
CELL
ADD
UTRANEXTERNAL
CELLBAND
LST
UTRANEXTERNAL
CELL
LST
BTS3900, BTS3900
UtranExternalCell CellId RNC cell ID UTRANEXTERNAL
LTE
CELLBAND
MOD
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELL
RMV
UTRANEXTERNAL
CELLBAND
 ADD
UTRANEXTERNAL
CELL
MOD
BTS3900, BTS3900
UtranExternalCell UtranDlArfcn Downlink UARFCN UTRANEXTERNAL
LTE
CELL
LST
UTRANEXTERNAL
CELL
 ADD
UTRANEXTERNAL
CELL
MOD
Uplink UARFCN BTS3900, BTS3900
UtranExternalCell UtranUlArfcnCfgInd UTRANEXTERNAL
configure indicator LTE
CELL
LST
UTRANEXTERNAL
CELL
 ADD
UTRANEXTERNAL
CELL
MOD
BTS3900, BTS3900
UtranExternalCell UtranUlArfcn Uplink UARFCN UTRANEXTERNAL
LTE
CELL
LST
UTRANEXTERNAL
CELL

ADD
UTRANEXTERNAL
CELL
MOD
UTRAN cell type BTS3900, BTS3900
UtranExternalCell UtranFddTddType UTRANEXTERNAL
indicator LTE
CELL
LST
UTRANEXTERNAL
CELL
 ADD
UTRANEXTERNAL
CELL
MOD
Routing area code BTS3900, BTS3900
UtranExternalCell RacCfgInd UTRANEXTERNAL
configure indicator LTE
CELL
LST
UTRANEXTERNAL
CELL

ADD
UTRANEXTERNAL
CELL
MOD
BTS3900, BTS3900
UtranExternalCell Rac Routing area code UTRANEXTERNAL
LTE
CELL
LST
UTRANEXTERNAL
CELL

ADD
UTRANEXTERNAL
CELL
MOD
Primary scrambling BTS3900, BTS3900
UtranExternalCell PScrambCode UTRANEXTERNAL
code LTE
CELL
LST
UTRANEXTERNAL
CELL

ADD
UTRANEXTERNAL
CELL
MOD
BTS3900, BTS3900
UtranExternalCell Lac Location area code UTRANEXTERNAL
LTE
CELL
LST
UTRANEXTERNAL
CELL
 ADD
UTRANEXTERNAL
CELL
MOD
BTS3900, BTS3900
UtranExternalCell CellName Cell name UTRANEXTERNAL
LTE
CELL
LST
UTRANEXTERNAL
CELL

ADD
UTRANEXTERNAL
CELL
MOD
CS and PS BTS3900, BTS3900
UtranExternalCell CsPsHOInd UTRANEXTERNAL
handover indicator LTE
CELL
LST
UTRANEXTERNAL
CELL
 ADD
UTRANEXTERNAL
CELLBAND
LST
UtranExternalCellSl External UTRAN BTS3900, BTS3900
UtranExternalCell UTRANEXTERNAL
aveBand Cell Slave Band LTE
CELLBAND
RMV
UTRANEXTERNAL
CELLBAND

ADD
UTRANEXTERNAL
CELLBAND
LST
MultiBand.FreqBan BTS3900, BTS3900
UtranExternalCell Frequency band UTRANEXTERNAL
d LTE
CELLBAND
RMV
UTRANEXTERNAL
CELLBAND
 ADD
UTRANEXTERNAL
CELL
MOD
Roaming Area BTS3900, BTS3900
UtranExternalCell RoamingAreaHoInd UTRANEXTERNAL
Handover Indicator LTE
CELL
LST
UTRANEXTERNAL
CELL
 ADD
UTRANEXTERNAL
CELL
MOD
BTS3900, BTS3900
UtranExternalCell CtrlMode Control Mode UTRANEXTERNAL
LTE
CELL
LST
UTRANEXTERNAL
CELL

ADD
BBPCOLLABORAT
EGRP
BLK
BBPCOLLABORAT
EGRP
DSP
BBPCOLLABORAT
EGRP
LST
BbpCollaborateGrpI BBP Collaboration BTS3900, BTS3900
BbpCollaborateGrp BBPCOLLABORAT
d Group ID LTE
EGRP
MOD
BBPCOLLABORAT
EGRP
RMV
BBPCOLLABORAT
EGRP
UBL
BBPCOLLABORAT
EGRP
 ADD
BBPCOLLABORAT
EGRP
MOD
Baseband BTS3900, BTS3900
BbpCollaborateGrp BasebandEqmId BBPCOLLABORAT
Equipment ID LTE
EGRP
LST
BBPCOLLABORAT
EGRP
 DSP
BbpLoadBalanceSt BBP Load Balance BTS3900, BTS3900
BbpCollaborateGrp BBPCOLLABORAT
atus Status LTE
EGRP
 Load Balance DSP
LBUnavailableReas BTS3900, BTS3900
BbpCollaborateGrp Unavailable BBPCOLLABORAT
on LTE
Reason EGRP
 DSP
BbpCollaborateLBT BBP Load Balance BTS3900, BTS3900
BbpCollaborateGrp BBPCOLLABORAT
ype Type LTE
EGRP

DSP
BbpCollaborateCab BTS3900, BTS3900
BbpCollaborateGrp Cabinet No. BBPCOLLABORAT
inetNo LTE
EGRP

DSP
BbpCollaborateSub BTS3900, BTS3900
BbpCollaborateGrp Subrack No. BBPCOLLABORAT
rackNo LTE
EGRP

DSP
BbpCollaborateSlot BTS3900, BTS3900
BbpCollaborateGrp Slot No. BBPCOLLABORAT
No LTE
EGRP
 BLK
BbpCollaborateBloc BBP Collaboration BTS3900, BTS3900
BbpCollaborateGrp BBPCOLLABORAT
kTimer Group Block Timer LTE
EGRP
 ADD
BBPCOLLABORAT
EGRP
MOD
BbpCollaborateTrig BBP Collaboration BTS3900, BTS3900
BbpCollaborateGrp BBPCOLLABORAT
gerThd Trigger Threshold LTE
EGRP
LST
BBPCOLLABORAT
EGRP
 ADD
BBPCOLLABORAT
EGRP
MOD
BbpCollaborateCle BBP Collaboration BTS3900, BTS3900
BbpCollaborateGrp BBPCOLLABORAT
arThd Clear Threshold LTE
EGRP
LST
BBPCOLLABORAT
EGRP
 BLK
BTS3900, BTS3900
BbpCollaborateGrp BlockPriority Block Priority BBPCOLLABORAT
LTE
EGRP

MOD
TrafficFaultyDetect Traffic Faulty Detect BTS3900, BTS3900 ENODEBALMCFG
eNodeBAlmCfg
Period Period LTE LST
ENODEBALMCFG
 MOD
Service Interface
BTS3900, BTS3900 ENODEBALMCFG
eNodeBAlmCfg SrvIntfAlmCfgSw Alarm Configure
LTE LST
Switch
ENODEBALMCFG
 MOD
ENODEBFRAMEO
ENodeBFrameOffs BTS3900, BTS3900 FFSET
TddFrameOffset TDD Frame Offset
et LTE LST
ENODEBFRAMEO
FFSET

MOD
ENODEBFRAMEO
ENodeBFrameOffs BTS3900, BTS3900 FFSET
FddFrameOffset FDD Frame Offset
et LTE LST
ENODEBFRAMEO
FFSET
 MOD
ENODEBRESMOD
eNodeBResModeAl BbpResAutoConfig BBP Resource Auto BTS3900, BTS3900 EALGO
go Sw Config Switch LTE LST
ENODEBRESMOD
EALGO
 MOD
ENODEBRESMOD
TDD BBP Resource
eNodeBResModeAl TddBbpResDeploy BTS3900, BTS3900 EALGO
Auto Deploy
go Algo LTE LST
Algorithm
ENODEBRESMOD
EALGO
 MOD
ENODEBRESMOD
FDD BBP Resource
eNodeBResModeAl FddBbpResDeploy BTS3900, BTS3900 EALGO
Auto Deploy
go Algo LTE LST
Algorithm
ENODEBRESMOD
EALGO

MOD
ENODEBRESMOD
eNodeBResModeAl BbpResAutoRecfgT BBP Resource Auto BTS3900, BTS3900 EALGO
go imer Reconfig Timer LTE LST
ENODEBRESMOD
EALGO
 MOD
ENODEBSONDBC
BTS3900, BTS3900 FG
eNodeBSonDBCfg StartTime Start Time
LTE LST
ENODEBSONDBC
FG

MOD
Cluster Partition
PrtNodeBaseBand BTS3900, BTS3900 EUCOSCHCFG
EuCoSchCfg Node Base Band
EqmId LTE LST
Equipment Id
EUCOSCHCFG
 MOD
Coordinated
BTS3900, BTS3900 EUCOSCHCFG
EuCoSchCfg WorkMode Scheduling Work
LTE LST
Mode
EUCOSCHCFG

MOD
EUCOSCHDLCOM
Coordinated
EuCoSchDLCoMP BTS3900, BTS3900 PCFG
CordInfoEffDelay Information
Cfg LTE LST
Effective Delay
EUCOSCHDLCOM
PCFG
 MOD
EUCOSCHDLCOM
Inter-eNodeB
EuCoSchDLCoMP InterEnbDlCompSw BTS3900, BTS3900 PCFG
DlCoMP Algorithm
Cfg itch LTE LST
Switch
EUCOSCHDLCOM
PCFG

MOD
EUCOSCHDLCOM
Coordinated
EuCoSchDLCoMP BTS3900, BTS3900 PCFG
EuCoSchUeSpec Schedule Ue
Cfg LTE LST
Specification
EUCOSCHDLCOM
PCFG

MOD
EUCOSCHDLCOM
Coordination Infor
EuCoSchDLCoMP CordInfoEffDelayM BTS3900, BTS3900 PCFG
Effective Delay
Cfg ode LTE LST
Mode
EUCOSCHDLCOM
PCFG
 MOD
UL Inter eNodeB
BTS3900, BTS3900 EUULCOSCHCFG
EuUlCoSchCfg UlInterEnbCamcSw Coordinated AMC
LTE LST
Switch
EUULCOSCHCFG
 MOD
BbResCapacityMod BTS3900, BTS3900 FDDRESMODE
FddResMode BbCapabilityMode
e LTE LST
FDDRESMODE
 MOD
SFN Capability BTS3900, BTS3900 FDDRESMODE
FddResMode SfnCapabilityMode
Mode LTE LST
FDDRESMODE
 MOD
Baseband
BbResExclusiveSwi BTS3900, BTS3900 FDDRESMODE
FddResMode Equipment
tch LTE LST
Exclusive Switch
FDDRESMODE

LST
BTS3900, BTS3900 LIOPTATOMRULE
LIOptAtomRule AtomRuleID Atom Rule ID
LTE MOD
LIOPTATOMRULE

Measurement BTS3900, BTS3900 LST

LIOptAtomRule MeasureObjType
Object Type LTE LIOPTATOMRULE
 BTS3900, BTS3900 LST
LIOptAtomRule ConditionType Condition Type
LTE LIOPTATOMRULE

MOD
Threshold for
ThresholdforNumPa BTS3900, BTS3900 LIOPTATOMRULE
LIOptAtomRule Numerical
ra LTE LST
Parameter
LIOPTATOMRULE
 Measurement BTS3900, BTS3900 LST
LIOptAtomRule MeasureObject
Object LTE LIOPTATOMRULE

Intelligent
BTS3900, BTS3900 LST
LIOptFeature IOptFeatureID Optimization
LTE LIOPTFEATURE
Feature ID

Intelligent
BTS3900, BTS3900 LST
LIOptFeature IOptFeatureName Optimization
LTE LIOPTFEATURE
Feature Name

DSP
Intelligent
BTS3900, BTS3900 LIOPTFUNCTION
LIOptFunction IOptFunctionID Optimization
LTE LST
Function ID
LIOPTFUNCTION
 DSP
Intelligent
BTS3900, BTS3900 LIOPTFUNCTION
LIOptFunction IOptFunctionName Optimization
LTE LST
Function Name
LIOPTFUNCTION

DSP
Intelligent
BTS3900, BTS3900 LIOPTFUNCTION
LIOptFunction IOptFeatureID Optimization
LTE LST
Feature ID
LIOPTFUNCTION

Measurement BTS3900, BTS3900 LST

LIOptFunction MeasureObjType
Object Type LTE LIOPTFUNCTION
 BTS3900, BTS3900 DSP
LIOptFunction LocalCellId Local Cell ID
LTE LIOPTFUNCTION

BTS3900, BTS3900 DSP

LIOptFunction Status Status
LTE LIOPTFUNCTION

ACT LIOPTRULE
DEA LIOPTRULE
BTS3900, BTS3900
LIOptRule RuleID Rule ID DSP LIOPTRULE
LTE
LST LIOPTRULE
MOD LIOPTRULE
 BTS3900, BTS3900
LIOptRule LocalCellId Local Cell ID DSP LIOPTRULE
LTE

BTS3900, BTS3900 DSP LIOPTRULE

LIOptRule ActionType Action Type
LTE LST LIOPTRULE
 AtomRuleRelationT Relationship Type BTS3900, BTS3900 DSP LIOPTRULE
LIOptRule
ype of Atom Rule LTE LST LIOPTRULE

MOD LIOPTRULE
BTS3900, BTS3900
LIOptRule Period Period DSP LIOPTRULE
LTE
LST LIOPTRULE

BTS3900, BTS3900 DSP LIOPTRULE

LIOptRule Action Action
LTE LST LIOPTRULE
 Intelligent
BTS3900, BTS3900 DSP LIOPTRULE
LIOptRule IOptFunctionID Optimization
LTE LST LIOPTRULE
Function ID

MOD LIOPTRULE
BTS3900, BTS3900
LIOptRule PenaltyTime Penalty Time DSP LIOPTRULE
LTE
LST LIOPTRULE
 MOD LIOPTRULE
BTS3900, BTS3900
LIOptRule AdaptiveRAT Adaptive RAT DSP LIOPTRULE
LTE
LST LIOPTRULE

BTS3900, BTS3900 DSP LIOPTRULE

LIOptRule ActiveStatus Active Status
LTE LST LIOPTRULE
 BTS3900, BTS3900
LIOptRule ExecutiveStatus Executive Status DSP LIOPTRULE
LTE

LST
LIOPTRULEMEMB
BTS3900, BTS3900 ER
LIOptRuleMember RuleID Rule ID
LTE MOD
LIOPTRULEMEMB
ER

LST
LIOPTRULEMEMB
BTS3900, BTS3900 ER
LIOptRuleMember AtomRuleID Atom Rule ID
LTE MOD
LIOPTRULEMEMB
ER
 MOD
LIOPTRULEMEMB
BTS3900, BTS3900 ER
LIOptRuleMember ActiveStatus Active Status
LTE LST
LIOPTRULEMEMB
ER

ADD
NCELLPLMNLIST
LST
Mobile Country BTS3900, BTS3900 NCELLPLMNLIST
NCellPlmnList Mcc
Code LTE MOD
NCELLPLMNLIST
RMV
NCELLPLMNLIST

ADD
NCELLPLMNLIST
LST
Mobile Network BTS3900, BTS3900 NCELLPLMNLIST
NCellPlmnList Mnc
Code LTE MOD
NCELLPLMNLIST
RMV
NCELLPLMNLIST

ADD
NCELLPLMNLIST
LST
BTS3900, BTS3900 NCELLPLMNLIST
NCellPlmnList RatType Rat Type
LTE MOD
NCELLPLMNLIST
RMV
NCELLPLMNLIST
 ADD
NCELLPLMNLIST
BTS3900, BTS3900 MOD
NCellPlmnList PlmnListType Plmn List Type
LTE NCELLPLMNLIST
LST
NCELLPLMNLIST

ADD
PCCFREQCFG
DSP
PCCSCELLLIST
PCC Downlink BTS3900, BTS3900 LST
PccFreqCfg PccDlEarfcn
EARFCN LTE PCCFREQCFG
MOD
PCCFREQCFG
RMV
PCCFREQCFG
 ADD
PCCFREQCFG
Preferred PCC BTS3900, BTS3900 MOD
PccFreqCfg PreferredPccPriority
Priority LTE PCCFREQCFG
LST
PCCFREQCFG

ADD
PCCFREQCFG
PCC A4 RSRP BTS3900, BTS3900 MOD
PccFreqCfg PccA4RsrpThd
Threshold LTE PCCFREQCFG
LST
PCCFREQCFG
 ADD
PCCFREQCFG
PCC A4 RSRQ BTS3900, BTS3900 MOD
PccFreqCfg PccA4RsrqThd
Threshold LTE PCCFREQCFG
LST
PCCFREQCFG

ADD
PIMCELLGROUP
DSP
PIM Cell Group BTS3900, BTS3900 PIMCELLGROUP
PIMCellGroup PIMCellGroupId
Identity LTE LST
PIMCELLGROUP
RMV
PIMCELLGROUP

ADD
PIMCELLGROUP
BTS3900, BTS3900 DSP
PIMCellGroup Cell1Id Cell1 Local Cell ID
LTE PIMCELLGROUP
LST
PIMCELLGROUP

ADD
PIMCELLGROUP
BTS3900, BTS3900 DSP
PIMCellGroup Cell2Id Cell2 Local Cell ID
LTE PIMCELLGROUP
LST
PIMCELLGROUP
 ADD
PIMCELLGROUP
Cell1 Sector BTS3900, BTS3900 DSP
PIMCellGroup Cell1SectorEqmId
Equipment Identity LTE PIMCELLGROUP
LST
PIMCELLGROUP

ADD
PIMCELLGROUP
Cell2 Sector BTS3900, BTS3900 DSP
PIMCellGroup Cell2SectorEqmId
Equipment Identity LTE PIMCELLGROUP
LST
PIMCELLGROUP

BTS3900, BTS3900 DSP

PIMCellGroup Cell1PIMState Cell1 PIM State
LTE PIMCELLGROUP

BTS3900, BTS3900 DSP

PIMCellGroup Cell2PIMState Cell2 PIM State
LTE PIMCELLGROUP

ADD
SCCFREQCFG
LST
PCC Downlink BTS3900, BTS3900 SCCFREQCFG
SccFreqCfg PccDlEarfcn
EARFCN LTE MOD
SCCFREQCFG
RMV
SCCFREQCFG
 ADD
SCCFREQCFG
LST
SCC Downlink BTS3900, BTS3900 SCCFREQCFG
SccFreqCfg SccDlEarfcn
EARFCN LTE MOD
SCCFREQCFG
RMV
SCCFREQCFG

ADD
SCCFREQCFG
BTS3900, BTS3900 MOD
SccFreqCfg SccPriority SCC Priority
LTE SCCFREQCFG
LST
SCCFREQCFG

ADD
SCCFREQCFG
BTS3900, BTS3900 MOD
SccFreqCfg SccA2Offset SCC A2 Offset
LTE SCCFREQCFG
LST
SCCFREQCFG
 ADD
SCCFREQCFG
BTS3900, BTS3900 MOD
SccFreqCfg SccA4Offset SCC A4 Offset
LTE SCCFREQCFG
LST
SCCFREQCFG

ADD
SCCFREQCFG
SCell Blind
BTS3900, BTS3900 MOD
SccFreqCfg BlindScellAddThd Configuration Flag
LTE SCCFREQCFG
Addition Threshold
LST
SCCFREQCFG
 ADD
SCCFREQCFG
SCell Blind
BTS3900, BTS3900 MOD
SccFreqCfg BlindScellDelThd Configuration Flag
LTE SCCFREQCFG
Deletion Threshold
LST
SCCFREQCFG
 ADD
SCCFREQCFG
SCell Blind
BTS3900, BTS3900 MOD
SccFreqCfg CtrlMode Configuration Flag
LTE SCCFREQCFG
Control Mode
LST
SCCFREQCFG

ADD
SCCFREQCFG
BTS3900, BTS3900 MOD
SccFreqCfg SpidGrpId SPID Group ID
LTE SCCFREQCFG
LST
SCCFREQCFG
 MOD
SERVICEDIFFSET
BTS3900, BTS3900 TING
ServiceDiffSetting QueueWeight0 Queue0 Weight
LTE LST
SERVICEDIFFSET
TING

MOD
SERVICEDIFFSET
BTS3900, BTS3900 TING
ServiceDiffSetting QueueWeight1 Queue1 Weight
LTE LST
SERVICEDIFFSET
TING

MOD
SERVICEDIFFSET
BTS3900, BTS3900 TING
ServiceDiffSetting QueueWeight2 Queue2 Weight
LTE LST
SERVICEDIFFSET
TING

MOD
SERVICEDIFFSET
BTS3900, BTS3900 TING
ServiceDiffSetting QueueWeight3 Queue3 Weight
LTE LST
SERVICEDIFFSET
TING

MOD
SERVICEDIFFSET
BTS3900, BTS3900 TING
ServiceDiffSetting QueueWeight4 Queue4 Weight
LTE LST
SERVICEDIFFSET
TING

MOD
SERVICEDIFFSET
BTS3900, BTS3900 TING
ServiceDiffSetting QueueWeight5 Queue5 Weight
LTE LST
SERVICEDIFFSET
TING

MOD
SERVICEDIFFSET
BTS3900, BTS3900 TING
ServiceDiffSetting QueueWeight6 Queue6 Weight
LTE LST
SERVICEDIFFSET
TING

MOD
SERVICEDIFFSET
BTS3900, BTS3900 TING
ServiceDiffSetting QueueWeight7 Queue7 Weight
LTE LST
SERVICEDIFFSET
TING
 ANR delete cell BTS3900, BTS3900 MOD ANR
ANR DelCellThd
threshold LTE LST ANR

Least Handover BTS3900, BTS3900 MOD ANR

ANR NcellHoStatNum
Num for Statistic LTE LST ANR
 BTS3900, BTS3900 MOD ANR
ANR StatisticPeriod Statistic cycle
LTE LST ANR

Fast ANR PCI BTS3900, BTS3900 MOD ANR

ANR FastAnrRprtAmount
report amount LTE LST ANR

Fast ANR PCI BTS3900, BTS3900 MOD ANR

ANR FastAnrRprtInterval
report interval LTE LST ANR
 FastAnrCheckPerio Fast ANR checking BTS3900, BTS3900 MOD ANR
ANR
d period LTE LST ANR

Fast ANR
BTS3900, BTS3900 MOD ANR
ANR FastAnrRsrpThd measurement
LTE LST ANR
RSRP threshold

IntraRat Fast ANR

FastAnrIntraRatMe BTS3900, BTS3900 MOD ANR
ANR measurement UE
asUeNum LTE LST ANR
number
 InterRat Fast ANR
FastAnrInterRatMe BTS3900, BTS3900 MOD ANR
ANR measurement UE
asUeNum LTE LST ANR
number

IntraRat Fast ANR

FastAnrIntraRatUe BTS3900, BTS3900 MOD ANR
ANR valid measurement
NumThd LTE LST ANR
min UE number

InterRat Fast ANR

FastAnrInterRatUe BTS3900, BTS3900 MOD ANR
ANR valid measurement
NumThd LTE LST ANR
min UE number
 BTS3900, BTS3900 MOD ANR
ANR OptMode Optimization Mode
LTE LST ANR
 StatisticPeriodForN Statistic Cycle For BTS3900, BTS3900 MOD ANR
ANR
RTDel Delete NRT LTE LST ANR
 StatisticNumForNR Statistic Number BTS3900, BTS3900 MOD ANR
ANR
TDel For Delete NRT LTE LST ANR
 ANR Active PCI
ActivePciConflictSw BTS3900, BTS3900 MOD ANR
ANR Conflict Detection
itch LTE LST ANR
Switch

BTS3900, BTS3900 MOD ANR

ANR StartTime Start time
LTE LST ANR
 BTS3900, BTS3900 MOD ANR
ANR StopTime Stop time
LTE LST ANR

UTRAN Fast ANR BTS3900, BTS3900 MOD ANR

ANR FastAnrRscpThd
RSCP threshold LTE LST ANR

GERAN Fast ANR BTS3900, BTS3900 MOD ANR

ANR FastAnrRssiThd
RSSI threshold LTE LST ANR
 CDMA2000 1XRTT
FastAnrCdma1xrttP BTS3900, BTS3900 MOD ANR
ANR Fast ANR Pilot
ilotThd LTE LST ANR
threshold

CDMA2000 HRPD
FastAnrCdmahrpdP BTS3900, BTS3900 MOD ANR
ANR Fast ANR Pilot
ilotThd LTE LST ANR
threshold
 Set not handover BTS3900, BTS3900 MOD ANR
ANR NoHoSetThd
attribute threshold LTE LST ANR
 NcellHoForNRTDel Handover threshold BTS3900, BTS3900 MOD ANR
ANR
Thd for delete NRT LTE LST ANR
 BTS3900, BTS3900 MOD ANR
ANR FastAnrMode Fast ANR Mode
LTE LST ANR
 BTS3900, BTS3900 MOD ANR
ANR EventAnrMode Event ANR Mode
LTE LST ANR
 BTS3900, BTS3900 MOD ANR
ANR CaUeChoseMode CA UE Chose Mode
LTE LST ANR
 AnrControlledHoStr Anr Controlled BTS3900, BTS3900 MOD ANR
ANR
ategy Handover Strategy LTE LST ANR
 SmartPreallocation Smart Preallocation BTS3900, BTS3900 MOD ANR
ANR
Mode Mode LTE LST ANR
 No Handover Set BTS3900, BTS3900 MOD ANR
ANR NoHoSetMode
Mode LTE LST ANR
 UtranEventAnrMod Utran Event ANR BTS3900, BTS3900 MOD ANR
ANR
e Mode LTE LST ANR
 GeranEventAnrMod Geran Event ANR BTS3900, BTS3900 MOD ANR
ANR
e Mode LTE LST ANR
 EventAnrWithVoipM Event ANR With BTS3900, BTS3900 MOD ANR
ANR
ode VoIP Mode LTE LST ANR
 UtranEventAnrCgiTi UTRAN Event ANR BTS3900, BTS3900 MOD ANR
ANR
mer CGI Timer LTE LST ANR

GeranEventAnrCgi GERAN Event ANR BTS3900, BTS3900 MOD ANR

ANR
Timer CGI Timer LTE LST ANR
 BTS3900, BTS3900 MOD ANR
ANR NrtDelMode NRT Delete Mode
LTE LST ANR
 Optimization Mode BTS3900, BTS3900 MOD ANR
ANR OptModeStrategy
Strategy LTE LST ANR
 Utran Handover
UtranNcellHoForNR BTS3900, BTS3900 MOD ANR
ANR Threshold for
TDelThd LTE LST ANR
Delete NRT
 Geran Handover
GeranNcellHoForN BTS3900, BTS3900 MOD ANR
ANR Threshold for
RTDelThd LTE LST ANR
Delete NRT

Neighbor Cell
NcellDelPunishPeri BTS3900, BTS3900 MOD ANR
ANR Deletion Punish
od LTE LST ANR
Period
 EUTRAN Neighbor
EutranNcellDelPun BTS3900, BTS3900 MOD ANR
ANR Cell Deletion
Num LTE LST ANR
Punish Number

UTRAN Neighbor
UtranNcellDelPunN BTS3900, BTS3900 MOD ANR
ANR Cell Deletion
um LTE LST ANR
Punish Number
 Handover Success
HoSucRateForCgiR BTS3900, BTS3900 MOD ANR
ANR Rate for CGI
ead LTE LST ANR
Reading
 Period for
PeriodForNCellRan BTS3900, BTS3900 MOD ANR
ANR Neighboring Cell
king LTE LST ANR
Ranking
 MOD
Statistic Period For
StatPeriodForNcell BTS3900, BTS3900 NCELLCLASSMGT
NCellClassMgt Neighbor Cell
Class LTE LST
Classification
NCELLCLASSMGT
 MOD
Handover Attempt BTS3900, BTS3900 NCELLCLASSMGT
NCellClassMgt HoAttemptThd
Threshold LTE LST
NCELLCLASSMGT
 MOD
Threshold of SCell BTS3900, BTS3900 NCELLCLASSMGT
NCellClassMgt CaSCellCfgThd
Configured LTE LST
NCELLCLASSMGT

ADD BFANT
DSP BFANT
BTS3900, BTS3900 LST BFANT
BfAnt DEVICENO Device No.
LTE MOD BFANT
RMV BFANT
DSP BFANTDB
 ADD BFANT
MOD BFANT
BTS3900, BTS3900
BfAnt Manufactory Manufactory DSP BFANT
LTE
DSP BFANTDB
LST BFANT

ADD BFANT
MOD BFANT
Connect RRU BTS3900, BTS3900
BfAnt CONNCN DSP BFANT
cabinet No. LTE
DSP BFANTDB
LST BFANT
ADD BFANT
MOD BFANT
Connect RRU BTS3900, BTS3900
BfAnt CONNSRN DSP BFANT
subrack No. LTE
DSP BFANTDB
LST BFANT
ADD BFANT
MOD BFANT
Connect RRU slot BTS3900, BTS3900
BfAnt CONNSN DSP BFANT
No. LTE
DSP BFANTDB
LST BFANT

ADD BFANT
MOD BFANT
Antenna model BTS3900, BTS3900
BfAnt MODELNO DSP BFANT
number LTE
DSP BFANTDB
LST BFANT

ADD BFANT
MOD BFANT
BTS3900, BTS3900
BfAnt TILT Tilt DSP BFANT
LTE
DSP BFANTDB
LST BFANT
ADD BFANT
MOD BFANT
BTS3900, BTS3900
BfAnt BEAMWIDTH Beamwidth DSP BFANT
LTE
DSP BFANTDB
LST BFANT
 ADD BFANT
MOD BFANT
BTS3900, BTS3900
BfAnt Band Band DSP BFANT
LTE
DSP BFANTDB
LST BFANT

ADD BFANT
BTS3900, BTS3900
BfAnt TYPE Antenna Type MOD BFANT
LTE
LST BFANT

ADD BFANT
BTS3900, BTS3900
BfAnt BFANTBEARING BFANTBEARING MOD BFANT
LTE
LST BFANT

BTS3900, BTS3900 DSP BFANT

BfAnt POLARMODE Polar Mode
LTE DSP BFANTDB

Element Beamform BTS3900, BTS3900 DSP BFANT

BfAnt ELMTBMWTH
Width LTE DSP BFANTDB

BTS3900, BTS3900 DSP BFANT

BfAnt AntPortNum Number of Port
LTE DSP BFANTDB

Amplitude Offset of
Crs2PortPhyPort1A BTS3900, BTS3900 DSP BFANT
BfAnt Physical Port 1 for
mp LTE DSP BFANTDB
CRS2
 Crs2PortPhyPort1P Phase of Physical BTS3900, BTS3900 DSP BFANT
BfAnt
ha Port 1 for CRS2 LTE DSP BFANTDB

Amplitude Offset of
Crs2PortPhyPort2A BTS3900, BTS3900 DSP BFANT
BfAnt Physical Port 2 for
mp LTE DSP BFANTDB
CRS2

Crs2PortPhyPort2P Phase of Physical BTS3900, BTS3900 DSP BFANT

BfAnt
ha Port 2 for CRS2 LTE DSP BFANTDB

Amplitude Offset of
Crs2PortPhyPort3A BTS3900, BTS3900 DSP BFANT
BfAnt Physical Port 3 for
mp LTE DSP BFANTDB
CRS2
 Crs2PortPhyPort3P Phase of Physical BTS3900, BTS3900 DSP BFANT
BfAnt
ha Port 3 for CRS2 LTE DSP BFANTDB

Amplitude Offset of
Crs2PortPhyPort4A BTS3900, BTS3900 DSP BFANT
BfAnt Physical Port 4 for
mp LTE DSP BFANTDB
CRS2

Crs2PortPhyPort4P Phase of Physical BTS3900, BTS3900 DSP BFANT

BfAnt
ha Port 4 for CRS2 LTE DSP BFANTDB

Amplitude Offset of
Crs4PortPhyPort1A BTS3900, BTS3900 DSP BFANT
BfAnt Physical Port 1 for
mp LTE DSP BFANTDB
CRS4
 Crs4PortPhyPort1P Phase of Physical BTS3900, BTS3900 DSP BFANT
BfAnt
ha Port 1 for CRS4 LTE DSP BFANTDB

Amplitude Offset of
Crs4PortPhyPort2A BTS3900, BTS3900 DSP BFANT
BfAnt Physical Port 2 for
mp LTE DSP BFANTDB
CRS4

Crs4PortPhyPort2P Phase of Physical BTS3900, BTS3900 DSP BFANT

BfAnt
ha Port 2 for CRS4 LTE DSP BFANTDB

BTS3900, BTS3900 DSP BFANT

BfAnt SE Session ID
LTE DSP BFANTDB
 MOD
BTS3900, BTS3900 BLINDNCELLOPT
BlindNcellOpt StatisticPeriod Statistic Period
LTE LST
BLINDNCELLOPT

MOD
Sample Number BTS3900, BTS3900 BLINDNCELLOPT
BlindNcellOpt SampleNumThd
Threshold LTE LST
BLINDNCELLOPT
 MOD
Handover Success BTS3900, BTS3900 BLINDNCELLOPT
BlindNcellOpt HoSuccRateThd
Ratio Threshold LTE LST
BLINDNCELLOPT
 MOD
CSFB Handover
CsfbHoAttempRatio BTS3900, BTS3900 BLINDNCELLOPT
BlindNcellOpt Attemption Ratio
Thd LTE LST
Threshold
BLINDNCELLOPT
 MOD
Blind Handover
BlindHoSuccRateT BTS3900, BTS3900 BLINDNCELLOPT
BlindNcellOpt Success Ratio
hd LTE LST
Threshold
BLINDNCELLOPT
 MOD
BTS3900, BTS3900 BLINDNCELLOPT
BlindNcellOpt OptMode Optimization Mode
LTE LST
BLINDNCELLOPT

ADD
IPSERVICEQOS
LST
Differentiated
BTS3900, BTS3900 IPSERVICEQOS
IpServiceQos Dscp Services Code
LTE MOD
Point
IPSERVICEQOS
RMV
IPSERVICEQOS

ADD
IPSERVICEQOS
BTS3900, BTS3900 MOD
IpServiceQos Description Traffic Description
LTE IPSERVICEQOS
LST
IPSERVICEQOS
 ADD
IPSERVICEQOS
QosPolicyTimeSwit QoS Policy Time BTS3900, BTS3900 MOD
IpServiceQos
ch Switch LTE IPSERVICEQOS
LST
IPSERVICEQOS

ADD
IPSERVICEQOS
First QoS Policy BTS3900, BTS3900 MOD
IpServiceQos FirQosPolicyId
Identity LTE IPSERVICEQOS
LST
IPSERVICEQOS

ADD
IPSERVICEQOS
FirQosPolicyTimeLe First QoS Policy BTS3900, BTS3900 MOD
IpServiceQos
ngth Time Length LTE IPSERVICEQOS
LST
IPSERVICEQOS

ADD
IPSERVICEQOS
Second QoS Policy BTS3900, BTS3900 MOD
IpServiceQos SecQosPolicyId
Identity LTE IPSERVICEQOS
LST
IPSERVICEQOS
 MOD
QOEHOCOMMON
QoEBasedHandove QoE-Based BTS3900, BTS3900 CFG
QoEHoCommonCfg
rStat Handover Stat LTE LST
QOEHOCOMMON
CFG

MOD
QOEHOCOMMON
QoEBasedHandove QoE-Based BTS3900, BTS3900 CFG
QoEHoCommonCfg
rLast Handover Last LTE LST
QOEHOCOMMON
CFG

ADD QOSPOLICY
BTS3900, BTS3900 LST QOSPOLICY
QosPolicy QosPolicyId QoS Policy Identity
LTE MOD QOSPOLICY
RMV QOSPOLICY
 ADD QOSPOLICY
BTS3900, BTS3900
QosPolicy TrafficType Traffic Type MOD QOSPOLICY
LTE
LST QOSPOLICY

ADD QOSPOLICY
Priority Queue BTS3900, BTS3900
QosPolicy PriQueueId MOD QOSPOLICY
Identity LTE
LST QOSPOLICY
 ADD QOSPOLICY
Downlink Service BTS3900, BTS3900
QosPolicy DlSgbr MOD QOSPOLICY
Grant Bit Rate LTE
LST QOSPOLICY

ADD QOSPOLICY
Downlink Service BTS3900, BTS3900
QosPolicy DlSmbr MOD QOSPOLICY
Maximum Bit Rate LTE
LST QOSPOLICY

ADD CAGROUP
BTS3900, BTS3900 LST CAGROUP
CaGroup CaGroupId CA Group Identity
LTE MOD CAGROUP
RMV CAGROUP
 ADD CAGROUP
CA Group Type BTS3900, BTS3900
CaGroup CaGroupTypeInd MOD CAGROUP
Indication LTE
LST CAGROUP

ADD
SSRDCELLGROUP
Primary Local Cell BTS3900, BTS3900 LST
SsrdCellGroup PrimaryLocalCellID
ID LTE SSRDCELLGROUP
RMV
SSRDCELLGROUP

ADD
SSRDCELLGROUP
BTS3900, BTS3900 LST
SsrdCellGroup SsrdLocalCellID Ssrd Local Cell ID
LTE SSRDCELLGROUP
RMV
SSRDCELLGROUP
 ADD
CAGROUPCELL
DSP
CAGROUPCELL
BTS3900, BTS3900 LST
CaGroupCell CaGroupId CA Group Identity
LTE CAGROUPCELL
MOD
CAGROUPCELL
RMV
CAGROUPCELL

ADD
CAGROUPCELL
LST
CAGROUPCELL
BTS3900, BTS3900 MOD
CaGroupCell LocalCellId Local Cell ID
LTE CAGROUPCELL
RMV
CAGROUPCELL
DSP
CAGROUPCELL

ADD
CAGROUPCELL
LST
CAGROUPCELL
BTS3900, BTS3900 MOD
CaGroupCell eNodeBId eNodeB ID
LTE CAGROUPCELL
RMV
CAGROUPCELL
DSP
CAGROUPCELL
 ADD
CAGROUPCELL
PreferredPCellPriori Preferred PCell BTS3900, BTS3900 MOD
CaGroupCell
ty Priority LTE CAGROUPCELL
LST
CAGROUPCELL

ADD
CAGROUPCELL
PCell A4 RSRP BTS3900, BTS3900 MOD
CaGroupCell PCellA4RsrpThd
Threshold LTE CAGROUPCELL
LST
CAGROUPCELL
 ADD
CAGROUPCELL
PCell A4 RSRQ BTS3900, BTS3900 MOD
CaGroupCell PCellA4RsrqThd
Threshold LTE CAGROUPCELL
LST
CAGROUPCELL

Carrier Aggregation
BTS3900, BTS3900 DSP
CaGroupCell TDDDl3ccCaLic for Downlink
LTE CAGROUPCELL
3CC(TDD)

Flexible CA from
TDDFlexCafrmMulti BTS3900, BTS3900 DSP
CaGroupCell Multiple
Carr LTE CAGROUPCELL
Carriers(TDD)

Carrier Aggregation
BTS3900, BTS3900 DSP
CaGroupCell TDDDl4CcCaLic for Downlink
LTE CAGROUPCELL
4CC(TDD)
 Carrier Aggregation
BTS3900, BTS3900 DSP
CaGroupCell TDDUlCaLic for Uplink
LTE CAGROUPCELL
2CC(TDD)

FDD+TDD Carrier
BTS3900, BTS3900 DSP
CaGroupCell FddTddLicTDD Aggregation(LTE
LTE CAGROUPCELL
TDD)

FDD+TDD Carrier
BTS3900, BTS3900 DSP
CaGroupCell FddTddLicFDD Aggregation(LTE
LTE CAGROUPCELL
FDD)

Downlink Carrier BTS3900, BTS3900 DSP

CaGroupCell DlCaForCmccTdd
Aggregation(TDD) LTE CAGROUPCELL
 MOD
Period update BTS3900, BTS3900 CELLIDPRDUPT
CellIdPrdUpt PrdUptSwitch
switch LTE LST
CELLIDPRDUPT

MOD
BTS3900, BTS3900 CELLIDPRDUPT
CellIdPrdUpt ActionTime Action time
LTE LST
CELLIDPRDUPT

MOD
BTS3900, BTS3900 CELLIDPRDUPT
CellIdPrdUpt Period Period
LTE LST
CELLIDPRDUPT

MOD
CSPC Algorithm BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara CspcAlgoSwitch
Switch LTE LST
CSPCALGOPARA
 MOD
CspcRsrpMeasMod CSPC RSRP BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara
e Measurement Mode LTE LST
CSPCALGOPARA

MOD
CSPC Cluster BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara CspcClusterMode
Mode LTE LST
CSPCALGOPARA

MOD
CspcClusterPartPer CSPC Cluster BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara
iod Partition Period LTE LST
CSPCALGOPARA
 MOD
CspcComputeSwitc CSPC Compute BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara
h Switch LTE LST
CSPCALGOPARA

MOD
CspcFullPowerSubf CSPC Full Power BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara
rameRatio Subframe Ratio LTE LST
CSPCALGOPARA
 MOD
CspcPowerConfigD CSPC Power BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara
elay Config Delay LTE LST
CSPCALGOPARA

MOD
CspcScheduleUeS CSPC Schedule UE BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara
pec Specification LTE LST
CSPCALGOPARA
 MOD
CSPC Enable
CspcEnableDlPrbR BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara Downlink PRB
atioThd LTE LST
Ratio Threshold
CSPCALGOPARA

MOD
TDD Cspc BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara TddCspcAlgoSwitch
Algorithm Switch LTE LST
CSPCALGOPARA
 MOD
CspcCapacityFacto CSPC Capacity BTS3900, BTS3900 CSPCALGOPARA
CspcAlgoPara
r Factor LTE LST
CSPCALGOPARA

ADD
ENODEBUSSERV
ERCFG
LST
ENODEBUSSERV
eNodeBUSServerCf BTS3900, BTS3900 ERCFG
UsServerIndex US Server Index
g LTE MOD
ENODEBUSSERV
ERCFG
RMV
ENODEBUSSERV
ERCFG
 ADD
ENODEBUSSERV
ERCFG
MOD
eNodeBUSServerCf BTS3900, BTS3900
UsServerIP US Server IP ENODEBUSSERV
g LTE
ERCFG
LST
ENODEBUSSERV
ERCFG

ADD
ENODEBUSSERV
ERCFG
MOD
eNodeBUSServerCf BTS3900, BTS3900
UsServerPort US Server Port ENODEBUSSERV
g LTE
ERCFG
LST
ENODEBUSSERV
ERCFG
 ADD
ENODEBUSSERV
ERCFG
MOD
eNodeBUSServerCf BTS3900, BTS3900
UsProtocolType US Protocol Type ENODEBUSSERV
g LTE
ERCFG
LST
ENODEBUSSERV
ERCFG

ADD
EUTRANSPEPCIC
ELL
LST
EUTRANSPEPCIC
BTS3900, BTS3900 ELL
EutranSpePciCell DlEarfcn Downlink EARFCN
LTE MOD
EUTRANSPEPCIC
ELL
RMV
EUTRANSPEPCIC
ELL

ADD
EUTRANSPEPCIC
ELL
LST
EUTRANSPEPCIC
Start Physical Cell BTS3900, BTS3900 ELL
EutranSpePciCell StaPhyCellId
ID LTE MOD
EUTRANSPEPCIC
ELL
RMV
EUTRANSPEPCIC
ELL
 ADD
EUTRANSPEPCIC
ELL
MOD
SpePhyCellIdRang Specified Physical BTS3900, BTS3900
EutranSpePciCell EUTRANSPEPCIC
e Cell ID Range LTE
ELL
LST
EUTRANSPEPCIC
ELL

MOD
ENODEBALGOSWI
Handover Algo BTS3900, BTS3900 TCH
ENodeBAlgoSwitch HoAlgoSwitch
switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
Handover Mode BTS3900, BTS3900 TCH
ENodeBAlgoSwitch HoModeSwitch
switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
DlIcic algorithm BTS3900, BTS3900 TCH
ENodeBAlgoSwitch DlIcicSwitch
switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
ANR algorithm BTS3900, BTS3900 TCH
ENodeBAlgoSwitch AnrSwitch
switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch RedirectSwitch Redirection switch
LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
MRO algorithm BTS3900, BTS3900 TCH
ENodeBAlgoSwitch MroSwitch
switch LTE LST
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
MacAssemblyOptS MAC Assembly BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
witch Optimize Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch TpeSwitch TPE switch
LTE LST
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
SpidSelectPlmnAlg SPID-based Select BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
oSwitch PLMN Algo Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch UlIcicFreqSwitch UlIcic freq switch
LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch LcsSwitch LCS switch
LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch TrmSwitch TRM switch
LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
PciConflictAlmSwitc PCI conflict alarm BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
h switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch PowerSaveSwitch Power save switch
LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch RimSwitch RIM switch
LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
ANR Under RAN
RanSharingAnrSwit BTS3900, BTS3900 TCH
ENodeBAlgoSwitch Sharing Algorithm
ch LTE LST
Switch
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
Frequency Layer BTS3900, BTS3900 TCH
ENodeBAlgoSwitch FreqLayerSwtich
Switch LTE LST
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch CmasSwitch Cmas Switch
LTE LST
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
Voice quality
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch VQMAlgoSwitch monitoring algo
LTE LST
switch
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
UeNumPreemptSwi UE number BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
tch preemption switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
Multi-Operator BTS3900, BTS3900 TCH
ENodeBAlgoSwitch MultiOpCtrlSwitch
Control Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch OverBBUsSwitch OverBBUsSwitch
LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
OperatorSpecificAlg Operator Specific BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
oSwitch Algorithm Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
HoSignalingOptSwit Handover Signaling BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
ch Optimized Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
CompatibilityCtrlSwi Compatibility BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
tch Control Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
BlindNcellOptSwitc Blind Ncell BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
h Optimization Switch LTE LST
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
Support RIM by
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch RimOnEcoSwitch eCoordinator
LTE LST
Switch
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
EutranVoipSupport Eutran Voip BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
Switch Support Switch LTE LST
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
CA Algorithm BTS3900, BTS3900 TCH
ENodeBAlgoSwitch CaAlgoSwitch
Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
MLB Algorithm BTS3900, BTS3900 TCH
ENodeBAlgoSwitch MlbAlgoSwitch
Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
Handover Common BTS3900, BTS3900 TCH
ENodeBAlgoSwitch HoCommOptSwitch
Optimized Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
HighLoadNetOptSw High Load Network BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
itch Optimized Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
Scheduling BTS3900, BTS3900 TCH
ENodeBAlgoSwitch SchOptSwitch
Optimization Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
PrachTimeStagSwit PRACH Time BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
ch Stagger Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
High Speed Root
HighSpeedRootSeq BTS3900, BTS3900 TCH
ENodeBAlgoSwitch Sequence Cycle
CSSwitch LTE LST
Shift Switch
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
Droped Packets BTS3900, BTS3900 TCH
ENodeBAlgoSwitch DropPktsStatSwitch
Statistics Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
NCellRankingSwitc Neighboring Cell BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
h Ranking Switch LTE LST
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
EUCompactRANSw Compact RAN BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
itch Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
BbpCollaborateSwit BBP Collaboration BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
ch Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
Root Sequence
RootSeqConflictDet BTS3900, BTS3900 TCH
ENodeBAlgoSwitch Conflict Detect
Switch LTE LST
Switch
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
Intelligent
BTS3900, BTS3900 TCH
ENodeBAlgoSwitch IOptAlgoSwitch Optimization
LTE LST
Algorithm Switch
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
Service HO Multiple
ServiceHoMultiTarg BTS3900, BTS3900 TCH
ENodeBAlgoSwitch Target Frequency
etFreqSw LTE LST
Switch
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
Soft Fault Self- BTS3900, BTS3900 TCH
ENodeBAlgoSwitch SFSSwitch
healing Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
PciConflictDetectS PCI Conflict Detect BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
witch Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
CA Load Balancing BTS3900, BTS3900 TCH
ENodeBAlgoSwitch CaLbAlgoSwitch
Algorithm Switch LTE LST
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
Uplink Scheduling BTS3900, BTS3900 TCH
ENodeBAlgoSwitch UlSchOptSwitch
Optimization Switch LTE LST
ENODEBALGOSWI
TCH
 MOD
ENODEBALGOSWI
CompactRANMultiA Compact RAN BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
PN Multiple APN LTE LST
ENODEBALGOSWI
TCH

MOD
ENODEBALGOSWI
ClkJumpCellReStar Clock Jump BTS3900, BTS3900 TCH
ENodeBAlgoSwitch
tSwitch Process Switch LTE LST
ENODEBALGOSWI
TCH
 InterFreqIdleMlbMo Inter Frequency Idle BTS3900, BTS3900 MOD ENODEBMLB
eNodeBMlb
de MLB Mode LTE LST ENODEBMLB
 InterFreqIdleMlbInt Inter Frequency Idle BTS3900, BTS3900 MOD ENODEBMLB
eNodeBMlb
erval MLB Interval LTE LST ENODEBMLB
 Inter Frequency Idle
InterFreqIdleMlbSta BTS3900, BTS3900 MOD ENODEBMLB
eNodeBMlb MLB Statistic
Thd LTE LST ENODEBMLB
Threshold
 DL CA LB Max
BTS3900, BTS3900 MOD ENODEBMLB
eNodeBMlb DlCaLbMaxCCNum Component Carrier
LTE LST ENODEBMLB
Number

CaUeMinDataVolRa CA UE Minimum BTS3900, BTS3900 MOD ENODEBMLB

eNodeBMlb
tio Data Volume Ratio LTE LST ENODEBMLB
 Uplink Traffic BTS3900, BTS3900 MOD LICRATIO
LicRatio UpLicRatio
License Ratio LTE LST LICRATIO

BTS3900, BTS3900 MOD LICRATIO

LicRatio TrafficSharingType Traffic Sharing Type
LTE LST LICRATIO

ADD
LICRATIOSHAREP
OLICY
LST
LICRATIOSHAREP
BTS3900, BTS3900 OLICY
LicRatioSharePolicy CnOperatorId CN Operator ID
LTE MOD
LICRATIOSHAREP
OLICY
RMV
LICRATIOSHAREP
OLICY
 ADD
LICRATIOSHAREP
OLICY
MOD
BTS3900, BTS3900
LicRatioSharePolicy TrfRatio TrfRatio LICRATIOSHAREP
LTE
OLICY
LST
LICRATIOSHAREP
OLICY

ADD
LICRATIOSHAREP
OLICY
MOD
BTS3900, BTS3900
LicRatioSharePolicy TrfSharingRatio TrfSharingRatio LICRATIOSHAREP
LTE
OLICY
LST
LICRATIOSHAREP
OLICY
 MRO optimization BTS3900, BTS3900 MOD MRO
MRO OptPeriod
period LTE LST MRO

Ncell optimization BTS3900, BTS3900 MOD MRO

MRO NcellOptThd
threshold LTE LST MRO

MRO statistics BTS3900, BTS3900 MOD MRO

MRO StatNumThd
number threshold LTE LST MRO
 Pingpong handover BTS3900, BTS3900 MOD MRO
MRO PingpongTimeThd
threshold LTE LST MRO

Pingpong ratio BTS3900, BTS3900 MOD MRO

MRO PingpongRatioThd
threshold LTE LST MRO
 Abnormal coverage BTS3900, BTS3900 MOD MRO
MRO CoverAbnormalThd
threshold LTE LST MRO

Serving cell RSRP BTS3900, BTS3900 MOD MRO

MRO ServingRsrpThd
threshold LTE LST MRO
 Neighbour cell BTS3900, BTS3900 MOD MRO
MRO NeighborRsrpThd
RSRP threshold LTE LST MRO

UePingPongNumTh UE PingPong BTS3900, BTS3900 MOD MRO

MRO
d Number Threshold LTE LST MRO
 Inter frequency
InterFreqMeasTooL measurement too BTS3900, BTS3900 MOD MRO
MRO
ateHoThd late handover LTE LST MRO
threshold

InterFreqA2RollBac Inter frequency A2 BTS3900, BTS3900 MOD MRO

MRO
kThd rollback threshold LTE LST MRO
 MRO Optimization BTS3900, BTS3900 MOD MRO
MRO MroOptMode
Mode LTE LST MRO

Unnecessary IRAT
UnnecInterRatHoO BTS3900, BTS3900 MOD MRO
MRO Ho Optimize
ptThd LTE LST MRO
Threshold
 Unnecessary
UnnecInterRatHoRs BTS3900, BTS3900 MOD MRO
MRO InterRAT Ho RSRP
rpThd LTE LST MRO
Threshold
 InterRAT A2 RSRP
InterRatA2RsrpMin BTS3900, BTS3900 MOD MRO
MRO Adjustment Lower
Thd LTE LST MRO
Limit

InterRAT MRO
InterRatStatNumTh BTS3900, BTS3900 MOD MRO
MRO Statistics Number
d LTE LST MRO
Threshold
 IntraRatTooEarlyHo IntraRat Too Early BTS3900, BTS3900 MOD MRO
MRO
RatioThd HO Ratio Threshold LTE LST MRO
 IntraRatTooLateHo IntraRat Too Late BTS3900, BTS3900 MOD MRO
MRO
RatioThd HO Ratio Threshold LTE LST MRO
 IntraRatAbnormalR IntraRat Abnormal BTS3900, BTS3900 MOD MRO
MRO
atioThd HO Ratio Threshold LTE LST MRO

InterFreqA2RollBac Inter Frequency A2 BTS3900, BTS3900 MOD MRO

MRO
kPeriod Rollback Period LTE LST MRO
 IntraRat HO Too
IntraRatHoTooEarly BTS3900, BTS3900 MOD MRO
MRO Early Time
TimeThd LTE LST MRO
Threshold
 InterRatAbnormalH InterRat Abnormal BTS3900, BTS3900 MOD MRO
MRO
oRatioThd HO Ratio Threshold LTE LST MRO
 InterRat
InterRatMeasTooLa Measurement Too BTS3900, BTS3900 MOD MRO
MRO
teHoThd Late Ratio LTE LST MRO
Threshold
 Unnecessary
UnnecInterRatHoR BTS3900, BTS3900 MOD MRO
MRO InterRat HO Ratio
atioThd LTE LST MRO
Threshold
 Unnecessary
UnnecInterRatHoM BTS3900, BTS3900 MOD MRO
MRO InterRat HO
easTime LTE LST MRO
Measurement Time

BTS3900, BTS3900 LST SIMULOAD

SimuLoad SimuLoadCfgIndex configuration index
LTE MOD SIMULOAD

BTS3900, BTS3900 MOD SIMULOAD

SimuLoad SimuLoadRbThd RB usage threshold
LTE LST SIMULOAD
 Power usage BTS3900, BTS3900 MOD SIMULOAD
SimuLoad SimuLoadPwrThd
threshold LTE LST SIMULOAD

SimuLoadReportPe BTS3900, BTS3900 MOD SIMULOAD

SimuLoad Report period
riod LTE LST SIMULOAD

SimuLoadStatPerio BTS3900, BTS3900 MOD SIMULOAD

SimuLoad Statistic period
d LTE LST SIMULOAD

Frequency selective BTS3900, BTS3900 MOD SIMULOAD

SimuLoad FreqSelSwitch
switch LTE LST SIMULOAD
 MOD
TCPACKCTRLALG
TCP ACK Control BTS3900, BTS3900 O
TcpAckCtrlAlgo AckCtrlSwitch
Switch LTE LST
TCPACKCTRLALG
O

MOD
TCPACKCTRLALG
BTS3900, BTS3900 O
TcpAckCtrlAlgo DlMaxThroughput DL Max Throughput
LTE LST
TCPACKCTRLALG
O

MOD
TCPACKCTRLALG
Control Timer BTS3900, BTS3900 O
TcpAckCtrlAlgo CtrlTimerLength
Length LTE LST
TCPACKCTRLALG
O
 MOD
TCP MSS Control BTS3900, BTS3900
TcpMssCtrl TcpMssCtrlSwitch TCPMSSCTRL
Switch LTE
LST TCPMSSCTRL

MOD
TCP MSS BTS3900, BTS3900
TcpMssCtrl TcpMssThd TCPMSSCTRL
Threshold LTE
LST TCPMSSCTRL
 BTS3900, BTS3900
TddFrameOffset TimeOffset TDD time offset None
LTE

MOD
Clock-Unavailable
ClkResExcludeSwit BTS3900, BTS3900 TDDRESMODESW
TddResModeSwitch Cell Activation
ch LTE LST
Switch
TDDRESMODESW
 MOD
Baseband
BbResExclusiveSwi BTS3900, BTS3900 TDDRESMODESW
TddResModeSwitch Equipment
tch LTE LST
Exclusive Switch
TDDRESMODESW

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo PortListNum TCP Port Number
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port1 TCP Port 1
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port2 TCP Port 2
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port3 TCP Port 3
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port4 TCP Port 4
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port5 TCP Port 5
LTE LST TPEALGO
 BTS3900, BTS3900 MOD TPEALGO
TpeAlgo Port6 TCP Port 6
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port7 TCP Port 7
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port8 TCP Port 8
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port9 TCP Port 9
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port10 TCP Port 10
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port11 TCP Port 11
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port12 TCP Port 12
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port13 TCP Port 13
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port14 TCP Port 14
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port15 TCP Port 15
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port16 TCP Port 16
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port17 TCP Port 17
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port18 TCP Port 18
LTE LST TPEALGO
 BTS3900, BTS3900 MOD TPEALGO
TpeAlgo Port19 TCP Port 19
LTE LST TPEALGO

BTS3900, BTS3900 MOD TPEALGO

TpeAlgo Port20 TCP Port 20
LTE LST TPEALGO

BTS3900, BTS3900 MOD VQMALGO

VQMAlgo ULDelayJitter UL Delay Jitter
LTE LST VQMALGO
 VQI Good BTS3900, BTS3900 MOD VQMALGO
VQMAlgo VqiGoodThd
Threshold LTE LST VQMALGO

BTS3900, BTS3900 MOD VQMALGO

VQMAlgo VqiPoorThd VQI Poor Threshold
LTE LST VQMALGO
 BTS3900, BTS3900 MOD VQMALGO
VQMAlgo VqiBadThd VQI Bad Threshold
LTE LST VQMALGO

Release Threshold
AmrWbRadioLowQ of Radio Low BTS3900, BTS3900 MOD VQMALGO
VQMAlgo
ualRelThd Quality for Amr LTE LST VQMALGO
Wideband
 Release Threshold
AmrNbRadioLowQu of Radio Low BTS3900, BTS3900 MOD VQMALGO
VQMAlgo
alRelThd Quality for Amr LTE LST VQMALGO
Narrowband
 AmrSilentPeriodNu Period Number of BTS3900, BTS3900 MOD VQMALGO
VQMAlgo
m Silent for Amr LTE LST VQMALGO
 Period Number of
AmrLowQualRelPer BTS3900, BTS3900 MOD VQMALGO
VQMAlgo Low Quality
iodNum LTE LST VQMALGO
Release for Amr

VQI Excellent BTS3900, BTS3900 MOD VQMALGO

VQMAlgo VqiExcellentThd
Threshold LTE LST VQMALGO
 Threshold of Silent BTS3900, BTS3900 MOD VQMALGO
VQMAlgo AmrNbSilentThd
for Amr Narrowband LTE LST VQMALGO
 Release Threshold
AmrWbRcvLowQua of Receive Low BTS3900, BTS3900 MOD VQMALGO
VQMAlgo
lRelThd Quality for Amr LTE LST VQMALGO
Wideband
 Release Threshold
AmrNbRcvLowQual of Receive Low BTS3900, BTS3900 MOD VQMALGO
VQMAlgo
RelThd Quality for Amr LTE LST VQMALGO
Narrowband
 Threshold of Silent BTS3900, BTS3900 MOD VQMALGO
VQMAlgo AmrWbSilentThd
for Amr Wideband LTE LST VQMALGO

SET
ENBLICENSEALM
BTS3900, BTS3900 THD
eNBLicenseAlmThd OPRD OPRD
LTE LST
ENBLICENSEALM
THD

SET
ENBLICENSEALM
BTS3900, BTS3900 THD
eNBLicenseAlmThd OTHD OTHD
LTE LST
ENBLICENSEALM
THD
 SET
ENBLICENSEALM
BTS3900, BTS3900 THD
eNBLicenseAlmThd RPRD RPRD
LTE LST
ENBLICENSEALM
THD

SET
ENBLICENSEALM
BTS3900, BTS3900 THD
eNBLicenseAlmThd RTHD RTHD
LTE LST
ENBLICENSEALM
THD

MOD
Reserved Switch BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdSwPara0
Parameter 0 LTE LST
ENBRSVDPARA
 MOD
Reserved Switch BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdSwPara1
Parameter 1 LTE LST
ENBRSVDPARA
 MOD
Reserved Switch BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdSwPara2
Parameter 2 LTE LST
ENBRSVDPARA
 MOD
Reserved Switch BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdSwPara3
Parameter 3 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara3
Parameter 3 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara4
Parameter 4 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara5
Parameter 5 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara6
Parameter 6 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara10
Parameter 10 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara11
Parameter 11 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara12
Parameter 12 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara13
Parameter 13 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara20
Parameter 20 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara21
Parameter 21 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara22
Parameter 22 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara23
Parameter 23 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara24
Parameter 24 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara25
Parameter 25 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara26
Parameter 26 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara27
Parameter 27 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara28
Parameter 28 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara29
Parameter 29 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara31
Parameter 31 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara32
Parameter 32 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara33
Parameter 33 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara34
Parameter 34 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara35
Parameter 35 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara36
Parameter 36 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara37
Parameter 37 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara38
Parameter 38 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara39
Parameter 39 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara40
Parameter 40 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara41
Parameter 41 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara42
Parameter 42 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara43
Parameter 43 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara44
Parameter 44 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara45
Parameter 45 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara46
Parameter 46 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara47
Parameter 47 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara48
Parameter 48 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara49
Parameter 49 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara50
Parameter 50 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara51
Parameter 51 LTE LST
ENBRSVDPARA
 MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara52
Parameter 52 LTE LST
ENBRSVDPARA

MOD
Reserved BTS3900, BTS3900 ENBRSVDPARA
eNBRsvdPara RsvdPara53
Parameter 53 LTE LST
ENBRSVDPARA

MOD
ENODEBAUTOPO
eNodeBAutoPower AutoPowerOffSwitc RF module sleep BTS3900, BTS3900 WEROFF
Off h switch LTE LST
ENODEBAUTOPO
WEROFF
 MOD
ENODEBAUTOPO
eNodeBAutoPower RF module sleep BTS3900, BTS3900 WEROFF
PowerOffTime
Off start time LTE LST
ENODEBAUTOPO
WEROFF

MOD
ENODEBAUTOPO
eNodeBAutoPower RF module sleep BTS3900, BTS3900 WEROFF
PowerOnTime
Off stop time LTE LST
ENODEBAUTOPO
WEROFF
 DSP
eNodeBAutoPower RF module sleep BTS3900, BTS3900
AutoPoweroffStatus ENODEBAUTOPO
Off status LTE
WEROFF

MOD
ENODEBFLOWCT
Adaptive
eNodeBFlowCtrlPar AdaptUnsyncTimer BTS3900, BTS3900 RLPARA
Unsynchronized
a Len LTE LST
Timer Length
ENODEBFLOWCT
RLPARA
 MOD
Adaptive ENODEBFLOWCT
eNodeBFlowCtrlPar AdaptUnsyncUserN Unsynchronized BTS3900, BTS3900 RLPARA
a umThd User Num LTE LST
Threshold ENODEBFLOWCT
RLPARA
 MOD
ENODEBFLOWCT
eNodeBFlowCtrlPar DynAcBarPolicyMo Dynamic AC BTS3900, BTS3900 RLPARA
a de Barring Policy Mode LTE LST
ENODEBFLOWCT
RLPARA

MOD
ENODEBFLOWCT
eNodeBFlowCtrlPar CPU Load BTS3900, BTS3900 RLPARA
CpuLoadThd
a Threshold LTE LST
ENODEBFLOWCT
RLPARA
 Meaning IsKey Mandatory Dynamic Attribute Feature ID

Indicates the index

YES YES NO LBFD-002032
of the operator.

Indicates the
extended QoS
Class Identifier
(QCI), which is YES YES NO LBFD-002032
required by the
operator for user
differentiation.

Indicates the ID of LOFD-001043 /

the service-based TDLOFD-001043
NO NO NO
inter-RAT handover LOFD-001046 /
policy group. TDLOFD-001046

Indicates the ID of
the service-based
inter-frequency NO NO NO LBFD-00201805
handover policy
group.

Indicates the ID of
YES YES NO None
the operator.
Indicates the
priority of E-UTRAN
TDD or E-UTRAN
FDD in inter-
frequency blind
handover or blind
redirection
scenarios. To
prioritize E-UTRAN
TDD or E-UTRAN LBFD-00201802 /
NO NO NO
FDD, set this TDLBFD-00201802
parameter to
EUTRAN_TDD or
EUTRAN_FDD,
respectively. To
treat E-UTRAN
TDD and E-UTRAN
FDD equally, set
this parameter to
EUTRAN.

Indicates the
priority of E-UTRAN
TDD or E-UTRAN
FDD in inter-
frequency blind
handover or blind
redirection
scenarios. To
prioritize E-UTRAN
TDD or E-UTRAN
FDD, set this
parameter to
LBFD-00201802 /
EUTRAN_TDD or NO NO NO
TDLBFD-00201802
EUTRAN_FDD,
respectively. If the
FirstRatPri
parameter is set to
EUTRAN, the
SecondRatPri
parameter must be
set to NULL,
indicating that E-
UTRAN TDD and
E-UTRAN FDD are
not prioritized.
LTE TDD and LTE
FDD measurement
priorities in
coverage-based
inter-frequency
measurement
scenarios, and the
RSRP threshold of
inter-frequency
event A2 equals the
value of the
A3InterFreqHoA2T
hdRsrp parameter
or the
InterFreqHoA2Thd
Rsrp parameter
plus the value of
the
TddIfHoA2ThdRsrp LBFD-00201802 /
NO NO NO
Offset parameter or TDLBFD-00201802
the
FddIfHoA2ThdRsrp
Offset parameter. If
both the
TddIfHoA2ThdRsrp
Offset and
FddIfHoA2ThdRsrp
Offset parameters
are set to -100,
inter-frequency
event A2 is
delivered directly
without considering
LTE TDD and LTE
FDD measurement
priorities in
coverage-based
inter-frequency
LTE TDD and LTE
FDD measurement
priorities in
coverage-based
inter-frequency
measurement
scenarios, and the
RSRP threshold of
inter-frequency
event A2 equals the
value of the
A3InterFreqHoA2T
hdRsrp parameter
or the
InterFreqHoA2Thd
Rsrp parameter
plus the value of
the
FddIfHoA2ThdRsrp LBFD-00201802 /
NO NO NO
Offset parameter or TDLBFD-00201802
the
TddIfHoA2ThdRsrp
Offset parameter.
If both the
TddIfHoA2ThdRsrp
Offset and
FddIfHoA2ThdRsrp
Offset parameters
are set to -100,
inter-frequency
event A2 is
delivered directly
without considering
LTE TDD and LTE
FDD measurement
priorities in
coverage-based
inter-frequency
UTRAN and
GERAN
measurement
priorities in
coverage-based
inter-RAT
measurement
scenarios, and the
RSRP threshold of
inter-RAT event A2
equals the value of
the
InterRatHoA2ThdR
srp parameter plus
the value of the
UtranA2ThdRsrpOff
set or
GeranA2ThdRsrpOf
fset parameter. LOFD-001019 /
NO NO NO
If both the TDLOFD-001019
UtranA2ThdRsrpOff
set and
GeranA2ThdRsrpOf
fset parameters are
set to -100, inter-
RAT event A2 is
delivered directly
without considering
UTRAN and
GERAN
measurement
priorities in
coverage-based
inter-RAT
measurement
scenarios, and the
RSRP threshold is
the value of the
UTRAN and
GERAN
measurement
priorities in
coverage-based
inter-RAT
measurement
scenarios, and the
RSRP threshold of
inter-RAT event A2
equals the value of
the
InterRatHoA2ThdR
srp parameter plus
the value of the
UtranA2ThdRsrpOff
set or
GeranA2ThdRsrpOf
LOFD-001020 /
fset parameter. NO NO NO
TDLOFD-001020
If both the
UtranA2ThdRsrpOff
set and
GeranA2ThdRsrpOf
fset parameters are
set to -100, inter-
RAT event A2 is
delivered directly
without considering
UTRAN and
GERAN
measurement
priorities in
coverage-based
inter-RAT
measurement
scenarios, and the
RSRP threshold is
Indicates whether
the eNodeB checks
the CS+PS
handover capability
of external UTRAN
cells when initiating
SRVCC for
concurrent CS and
PS services. If this
parameter is set to
ON(On), the
eNodeB does not LOFD-001022 /
NO NO NO
check the capability TDLOFD-001022
indicated by the
setting of the
CsPsHOInd
parameter in the
UtranExternalCell
MOs. If this
parameter is set to
OFF(Off), the
eNodeB needs to
check this
capability.

Indicates the
medium-priority
inter-RAT for data
services. If this
parameter is set to
UTRAN, GERAN,
or CDMA2000, the
medium-priority
RAT for inter-RAT LOFD-001019 /
handovers of data TDLOFD-001019
services is UTRAN, LOFD-001020 /
NO NO NO
GERAN, or TDLOFD-001020
CDMA2000, LOFD-001021 /
respectively. TDLOFD-001021
The value
CDMA2000 is
invalid in the
current version.
Therefore, avoid
setting this
parameter to
CDMA2000.
Indicates the
highest-priority
inter-RAT for data
services. If this
parameter is set to
UTRAN, GERAN,
or CDMA2000, the
highest-priority RAT
for inter-RAT LOFD-001019 /
handovers of data TDLOFD-001019
services is UTRAN, LOFD-001020 /
NO NO NO
GERAN, or TDLOFD-001020
CDMA2000, LOFD-001021 /
respectively. TDLOFD-001021
The value
CDMA2000 is
invalid in the
current version.
Therefore, avoid
setting this
parameter to
CDMA2000.

Indicates the
lowest-priority inter-
RAT for data
services. If this
parameter is set to
UTRAN, GERAN,
or CDMA2000, the
lowest-priority RAT
for inter-RAT LOFD-001019 /
handovers of data TDLOFD-001019
services is UTRAN, LOFD-001020 /
NO NO NO
GERAN, or TDLOFD-001020
CDMA2000, LOFD-001021 /
respectively. TDLOFD-001021
The value
CDMA2000 is
invalid in the
current version.
Therefore, avoid
setting this
parameter to
CDMA2000.

This parameter
LOFD-070210 /
indicates the ID of YES YES NO
TDLOFD-001133
the operator.
 LOFD-001032 /
Indicates the
TDLOFD-001032
dedicated SPID for
LOFD-001044 /
an
TDLOFD-001044
operator.Operators
LOFD-001045 /
can define the
TDLOFD-001045
RatFreqPriorityGrou
LOFD-001054 /
pId MO YES YES NO
TDLOFD-001054
corresponding to
LOFD-00105401 /
the dedicated SPID.
TDLOFD-00105401
Each operator can
LOFD-001059 /
be configured with
TDLOFD-001059
a maximum of 256
LOFD-070210 /
dedicated SPIDs.
TDLOFD-001133

Indicates whether
to set a
RAT/frequency
priority. If this LOFD-001032 /
parameter is set to TDLOFD-001032
CFG, UEs LOFD-001044 /
preferentially camp TDLOFD-001044
NO NO NO
on the RAT or LOFD-001045 /
frequency. If this TDLOFD-001045
parameter is set to LOFD-070210 /
NOT_CFG, UEs do TDLOFD-001133
not preferentially
camp on the RAT or
frequency.

LOFD-001032 /
TDLOFD-001032
LOFD-001044 /
TDLOFD-001044
LOFD-001045 /
TDLOFD-001045
Indicates the ID of a
LOFD-001054 /
RAT/frequency NO NO NO
TDLOFD-001054
priority group.
LOFD-00105401 /
TDLOFD-00105401
LOFD-001059 /
TDLOFD-001059
LOFD-070210 /
TDLOFD-001133

Indicates the index

YES YES NO None
of the operator.
Indicates the QoS
Class Identifier
(QCI) of an EPS
bearer. Different
QCIs represent
different QoS
specifications such
as the packet delay
budget, packet YES YES NO None
error loss rate, and
resource type
(whether the
service is a GBR
service or not). For
details, see Table
6.1.7 in 3GPP TS
23.203.

Indicates the ID of LOFD-001043 /

the service-based TDLOFD-001043
NO NO NO
inter-RAT handover LOFD-001046 /
policy group. TDLOFD-001046

Indicates the ID of
the service-based
inter-frequency NO NO NO LBFD-00201805
handover policy
group.
bearers. If the value
is
SERVICE_HO_QCI
_NOT_ALLOWED(
QCI Bear Not
Allowed), the
eNodeB removes
the bearers with the
corresponding QCI.
If the value is
SERVICE_HO_QCI
_ALLOWED(QCI
Bear Allowed), the
eNodeB does not
remove the bearers
with the
corresponding QCI.
If the TDLBFD-00201805
ServiceBasedInterF TDLOFD-001043
NO NO NO
reqHoSwitch, TDLOFD-001046
UtranServiceHoSwit TDLOFD-070228
ch,
GeranServiceHoSw
itch,
CdmaHrpdServiceH
oSwitch,
Cdma1xRttService
HoSwitch, or
ServiceReqInterFre
qHoSwitch option is
selected, and an
incoming handover
is triggered, the
target eNodeB
reads the
ServiceHoBearerPo
licy parameter value
for each QCI of
Indicates the ARP
of a QCI configured
on the eNodeB. A
specific ARP is
configured on the
eNodeB for each
standardized QCI to
replace the ARP of NO NO NO None
a QCI delivered by
the EPC. If this
parameter is set to
0, the QCI ARP
configured on the
eNodeB does not
take effect.

LOFD-001033 /
TDLOFD-001033
LOFD-001034 /
Indicates the index TDLOFD-001034
YES YES NO
of the operator. TDLOFD-001052
TDLOFD-001053
TDLOFD-001035
TDLOFD-001090
Indicates the
highest-priority RAT LOFD-001033 /
for handovers. It is TDLOFD-001033
UTRAN by default. LOFD-001034 /
If this parameter is TDLOFD-001034
set to UTRAN, LOFD-001035 /
GERAN, or TDLOFD-001035
CDMA2000, the LOFD-001019 /
highest-priority RAT TDLOFD-001019
is UTRAN, GERAN, LOFD-001020 /
NO NO NO
or CDMA2000, TDLOFD-001020
respectively. LOFD-001021
The value TDLOFD-001052
CDMA2000 is TDLOFD-001053
invalid in the TDLOFD-001090
current version. TDLOFD-001043
Therefore, avoid TDLOFD-001072
setting this TDLOFD-001046
parameter to TDLOFD-001073
CDMA2000.
Indicates the
medium-priority
RAT for handovers.
It is GERAN by
default. If this
parameter is set to
LOFD-001033 /
UTRAN, GERAN,
TDLOFD-001033
or CDMA2000, the
LOFD-001034 /
medium-priority
TDLOFD-001034
RAT is UTRAN,
LOFD-001035 /
GERAN, or
TDLOFD-001035
CDMA2000,
LOFD-001019 /
respectively. If this
TDLOFD-001019
parameter is set to
LOFD-001020 /
NULL, no medium- NO NO NO
TDLOFD-001020
priority RAT is
LOFD-001021
specified and only
TDLOFD-001052
the highest-priority
TDLOFD-001053
RAT can be
TDLOFD-001090
selected for
TDLOFD-001043
handovers.
TDLOFD-001072
The value
TDLOFD-001046
CDMA2000 is
TDLOFD-001073
invalid in the
current version.
Therefore, avoid
setting this
parameter to
CDMA2000.
Indicates the
lowest-priority RAT
for handovers. It is
CDMA2000 by
default. If this
parameter is set to
LOFD-001033 /
UTRAN, GERAN,
TDLOFD-001033
or CDMA2000, the
LOFD-001034 /
lowest-priority RAT
TDLOFD-001034
is UTRAN, GERAN,
LOFD-001035 /
or CDMA2000,
TDLOFD-001035
respectively. If this
LOFD-001019 /
parameter is set to
TDLOFD-001019
NULL, no lowest-
LOFD-001020 /
priority RAT is NO NO NO
TDLOFD-001020
specified and only
LOFD-001021
the highest- or
TDLOFD-001052
medium-priority
TDLOFD-001053
RAT can be
TDLOFD-001090
selected for
TDLOFD-001043
handovers.
TDLOFD-001072
The value
TDLOFD-001046
CDMA2000 is
TDLOFD-001073
invalid in the
current version.
Therefore, avoid
setting this
parameter to
CDMA2000.

Indicates the LCS

capability of the
UTRAN. If this
parameter is set to
ON, the UTRAN LOFD-001033 /
NO NO NO
supports LCS. If TDLOFD-001033
this parameter is
set to OFF, the
UTRAN does not
support LCS.

Indicates the LCS

capability of the
GERAN. If this
parameter is set to
ON, the GERAN LOFD-001034 /
NO NO NO
supports LCS. If TDLOFD-001034
this parameter is
set to OFF, the
GERAN does not
support LCS.
Indicates the LCS
capability of the
CDMA2000. If this
parameter is set to
ON, the CDMA2000 LOFD-001035 /
NO NO NO
supports LCS. If TDLOFD-001035
this parameter is
set to OFF, the
CDMA2000 does
not support LCS.

Indicates the
highest-priority RAT
for CSFB initiated
by a UE in idle
mode. It is UTRAN
by default. If this
parameter is set to
UTRAN, GERAN, LOFD-001035 /
or CDMA2000, the TDLOFD-001035
highest-priority RAT LOFD-001088 /
is UTRAN, GERAN, NO NO NO TDLOFD-001088
or CDMA2000, LOFD-001089 /
respectively. TDLOFD-001089
The value TDLOFD-001090
CDMA2000 is
invalid in the
current version.
Therefore, avoid
setting this
parameter to
CDMA2000.
Indicates the
medium-priority
RAT for CSFB
initiated by a UE in
idle mode. It is
GERAN by default.
If this parameter is
set to UTRAN,
GERAN, or
CDMA2000, the
medium-priority
RAT is UTRAN,
GERAN, or
LOFD-001035 /
CDMA2000,
TDLOFD-001035
respectively. If this
LOFD-001088 /
parameter is set to
NO NO NO TDLOFD-001088
NULL, no medium-
LOFD-001089 /
priority RAT is
TDLOFD-001089
specified and only
TDLOFD-001090
the highest-priority
RAT can be
selected for CSFB
initiated by a UE in
idle mode.
The value
CDMA2000 is
invalid in the
current version.
Therefore, avoid
setting this
parameter to
CDMA2000.
Indicates the
lowest-priority RAT
for CSFB initiated
by a UE in idle
mode. It is
CDMA2000 by
default. If this
parameter is set to
UTRAN, GERAN,
or CDMA2000, the
lowest-priority RAT
is UTRAN, GERAN,
or CDMA2000,
LOFD-001035 /
respectively. If this
TDLOFD-001035
parameter is set to
LOFD-001088 /
NULL, no lowest-
NO NO NO TDLOFD-001088
priority RAT is
LOFD-001089 /
specified and only
TDLOFD-001089
the highest- or
TDLOFD-001090
medium-priority
RAT can be
selected for CSFB
initiated by a UE in
idle mode.
The value
CDMA2000 is
invalid in the
current version.
Therefore, avoid
setting this
parameter to
CDMA2000.

Indicates whether
the eNodeB selects
the target frequency
in a round robin
(RR) manner from
frequencies with the
same priority in
LOFD-
blind redirections
001033/TDLOFD-
for CSFB to
001033
UTRAN. If this NO NO NO
LOFD-
parameter is set to
001052/TDLOFD-
ON(On), the
001052
function of target
frequency selection
in an RR manner is
enabled. If this
parameter is set to
OFF(Off), this
function is disabled.
Indicates the CSFB
policy for a UE in
LOFD-001033 /
connected mode. If
TDLOFD-001033
the CSFB steering
LOFD-001034 /
function is disabled,
TDLOFD-001034
this parameter also NO NO NO
LOFD-001088 /
applies to UEs in
TDLOFD-001088
idle mode. The
LOFD-001089 /
policy can be PS
TDLOFD-001089
handover, CCO, or
redirection.

Indicates the CSFB

policy for a UE in LOFD-001088 /
idle mode. The TDLOFD-001088
NO NO NO
policy can be PS LOFD-001089 /
handover, CCO, or TDLOFD-001089
redirection.

Indicates whether
allocation/retention
priorities (ARPs)
can be configured
for CSFB services LBFD-002023
NO NO NO
triggered by /TDLBFD-002023
common calls. For
details about ARPs,
see 3GPP TS
23.401.
Indicates the
allocation/retention
priority (ARP) of a
CSFB service
triggered by a
common call. When
this parameter is LBFD-002023
NO NO NO
set to 1, the service /TDLBFD-002023
priority is the same
as that of an
emergency call. For
details about the
ARP, see 3GPP TS
23.401.

Indicates the mobile

country code (MCC)
of a target eNodeB.
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
(MNC). LBFD-002018 /
YES YES NO
The MCC consists TDLBFD-002018
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of a target
eNodeB.
A public land mobile
network (PLMN) ID
is comprised of a
mobile country
code (MCC) and an
LBFD-002018 /
MNC. YES YES NO
TDLBFD-002018
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the
tracking area code
(TAC), which is
used by the EPC to
determine the area
within which paging
messages are sent.
One tracking area
is comprised of one
or more cells. Two
TAC values LBFD-002018 /
YES YES NO
0x0000(0) and TDLBFD-002018
0xFFFE(65534) are
reserved according
to the protocol and
will not be used in
future versions.
Therefore, do not
use 0 or 65534 as a
TAC value in TAC
planning or
configuration.

Indicates the index

YES YES NO None
of the operator.

LBFD-00201801 /
TDLBFD-00201801
LBFD-00201802 /
TDLBFD-00201802
LBFD-00201804 /
Indicates the mobile TDLBFD-00201804
country code of the YES YES NO LBFD-00201805 /
target PLMN. TDLBFD-00201805
LOFD-001019 /
TDLOFD-001019
LOFD-001020 /
TDLOFD-001020
TDLOFD-001033
 LBFD-00201801 /
TDLBFD-00201801
LBFD-00201802 /
TDLBFD-00201802
LBFD-00201804 /
Indicates the mobile TDLBFD-00201804
network code of the YES YES NO LBFD-00201805 /
target PLMN. TDLBFD-00201805
LOFD-001019 /
TDLOFD-001019
LOFD-001020 /
TDLOFD-001020
TDLOFD-001033

Indicates the ID of
LOFD-00105401 /
the RAT/frequency YES YES NO
TDLOFD-00105401
priority group.

LOFD-00105401 /
Indicates the Radio TDLOFD-00105401
Access Technology YES YES NO TDLOFD-001090
(RAT). LOFD-001021 /
TDLOFD-001021
Indicates the
downlink frequency.
In CDMA2000, this
parameter indicates
the bandclass.
Before configuring
a priority for a LOFD-00105401 /
YES YES NO
frequency specified TDLOFD-00105401
by this parameter,
ensure that an
external or local cell
operating on this
frequency has been
configured.

Indicates the
priority of the intra-
RAT frequency
band or frequency.
The value 0
indicates the lowest
priority. The value
of this parameter
must be determined LOFD-00105401 /
NO NO NO
together with the TDLOFD-00105401
priorities of other
frequencies during
the network
planning. Cell
reselection priorities
in different RATs
cannot be the
same.

Indicates the
LOFD-00105401 /
GERAN frequency NO NO NO
TDLOFD-00105401
band.

LBFD-
Indicates the ID of 00201805/TDLBFD
YES YES NO
the operator. -00201805
TDLOFD-070228
Indicates the ID of
LBFD-
the service-based
00201805/TDLBFD
inter-frequency YES YES NO
-00201805
handover policy
TDLOFD-070228
group.

Indicates the index

of a DL EARFCN in
LBFD-
a DL EARFCN
00201805/TDLBFD
group for service- YES YES NO
-00201805
based inter-
TDLOFD-070228
frequency
handover.

Indicates a DL
EARFCN for
service-based inter-
frequency
handover. Only the
value with
LBFD-
DlEarfcnIndex 0 in
00201805/TDLBFD
the DL EARFCN NO NO NO
-00201805
group is valid for
TDLOFD-070228
LTE FDD cells. All
values of this
parameter are valid
and have the same
priority for LTE TDD
cells.
Indicates the
priority of the
frequency as the
target frequency for
service-based inter-
frequency
handovers. A larger
value indicates a
higher priority.
When evaluating
service-based inter-
frequency
handovers, the LBFD-
eNodeB selects the NO NO NO 00201805/TDLBFD
neighboring E- -00201805
UTRAN frequency
with the highest
priority for
measurements. If
several neighboring
E-UTRAN
frequencies have
the same priority,
these frequencies
are selected as
candidate
frequencies.

Indicates the ID of
YES YES NO LBFD-00201805
the operator.

Indicates the ID of
the service-based
LBFD-00201805 /
inter-frequency YES YES NO
TDLBFD-00201805
handover policy
group.
Indicates whether
to allow service-
based inter-
frequency
handovers of the
policy group to a
specified frequency.
If this parameter is
set to NO_HO,
LBFD-00201805 /
service-based inter- NO NO NO
TDLBFD-00201805
frequency
handovers of this
policy group to a
specified frequency
are not allowed. If
this parameter is
set to PERMIT_HO,
such handovers are
allowed.

Indicates the
service-based inter-
frequency A4
measurement
report waiting timer.
If the inter-
frequency
measurement is
triggered due to
service- or service
request-based
inter-frequency
handover, the time
for a UE performing
inter-frequency
TDLBFD-00201805
measurement must NO NO NO
TDLOFD-070228
be restricted. This
prevents the UE
from performing
repeated GAP
measurements
when it does not
receive
measurement
reports in a period,
ensuring that data
transmission will not
be affected. This
parameter is
dedicated to LTE
TDD cells.
When the UE
detects that the
signal quality in the
serving cell and that
in at least one inter-
frequency
neighboring
cell meet the
entering condition
for a service- or
service request-
based
handover, it does
not immediately
send a
measurement
report to the
eNodeB. Instead,
TDLBFD-00201805
the UE sends a NO NO NO
TDLOFD-070228
report only when
the signal quality
meets the entering
condition
throughout the
hysteresis.
This
parameter helps
decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of incorrect
handovers,
preventing

LOFD-001043 /
Indicates the index TDLOFD-001043
YES YES NO
of the operator. LOFD-001046 /
TDLOFD-001046
Indicates the ID of LOFD-001043 /
the service-based TDLOFD-001043
YES YES NO
inter-RAT handover LOFD-001046 /
policy group. TDLOFD-001046

Indicates whether
service-based inter-
RAT handovers are
forbidden, allowed,
or required for
services with the
QCI. If this
parameter is set to
NO_HO, service-
based inter-RAT LOFD-001043 /
handovers of this TDLOFD-001043
NO NO NO
policy group are LOFD-001046 /
forbidden. If this TDLOFD-001046
parameter is set to
PERMIT_HO, such
handovers are
allowed but not
proactively initiated.
If this parameter is
set to MUST_HO,
such handovers
must be initiated.
service-based inter-
frequency handover
and service-based
inter-RAT handover
measurements are
met, the eNodeB
delivers the
configuration for
service-based inter-
frequency handover
measurement if the
following
requirements are
met:
InterRatHoState of
at least one bearer
of the UE is set to
MUST_HO.
TDLOFD-001043
ServiceIrMeasMode NO NO NO
TDLOFD-001046
is set to
SERVIC_IR_MEAS
_ ORDER. After the
service-based inter-
frequency handover
measurement times
out, the eNodeB
delivers the
configuration for
service-based inter-
RAT handover
measurement. If
any of the
preceding
requirements are
not met, the
eNodeB delivers
the configuration for
LOFD-00105401 /
Indicates the
TDLOFD-00105401
subscriber profile ID YES YES NO
LOFD-001059 /
(SPID).
TDLOFD-001059
Indicates whether
to use normal or
special DRX. If this
parameter is set to
TRUE, ordinary
DRX parameters
are applied to UEs LBFD-002017 /
NO NO NO
with the SPID. If TDLBFD-002017
this parameter is
set to FALSE,
special DRX
parameters are
applied to UEs with
the SPID.
Indicates whether
to set the priority for
the intra-RAT
frequency group. If
this parameter is
set to CFG(CFG),
UEs select the
target frequency
LOFD-00105401 /
based on the NO NO NO
TDLOFD-00105401
priority setting. If
this parameter is
set to
NOT_CFG(NOT_C
FG), UEs do not
select the target
frequency based on
the priority setting.

Indicates the ID of
the intra-RAT LOFD-00105401 /
NO NO NO
frequency priority TDLOFD-00105401
group.

Indicates whether
to support
preallocation. If this
parameter is set to
TRUE and
PreAllocationSwitch
under the
UlSchSwitch
LOFD-001059 /
parameter in the NO NO NO
TDLOFD-001059
CellAlgoSwitch MO
is set to On,
resources can be
preallocated to
UEs. Otherwise,
resources are not
preallocated to
UEs.

Indicates whether
to enable or disable
inter-frequency load
balancing for the
SPID. The values
LOFD-00105401 /
TRUE or FALSE
TDLOFD-00105401
indicate that inter- NO NO NO
LOFD-001032 /
frequency load
TDLOFD-001032
balancing is
allowed or
prohibited for UEs
with the SPID,
respectively.
Indicates whether
to enable or disable
inter-RAT load
sharing for the LOFD-00105401 /
SPID. The values TDLOFD-00105401
TRUE or FALSE LOFD-001044 /
NO NO NO
indicate that inter- TDLOFD-001044
RAT load sharing is LOFD-001045 /
allowed or TDLOFD-001045
prohibited for UEs
with the SPID,
respectively.

Indicates whether
to allow SPID-
based handovers
back to the home
public land mobile
network (HPLMN).
If this parameter is
set to
TRUE(TRUE), a
roaming UE can be
handed over to the
LOFD-00105401 /
HPLMN network NO NO NO
TDLOFD-00105401
when it moves back
to the coverage of
the HPLMN network
based on the SPID.
If this parameter is
set to
FALSE(FALSE),
this UE cannot be
handed over to the
HPLMN network
based on the SPID.

Indicates the
coefficient
corresponding to
the uplink
scheduling priority
factor configured for
UEs with SPIDs.
The uplink
scheduling priority
factor for UEs with
NO NO NO TDLOFD-00105402
SPIDs equals the
value of the
UlschPriorityFactor
parameter in the
StandardQci MO
multiplied by the
value of this
parameter. This
parameter is valid
only for QCIs 6 to 9.
Indicates the
coefficient
corresponding to
the downlink
scheduling priority
factor configured for
UEs with SPIDs.
The downlink
scheduling priority
factor for UEs with
NO NO NO TDLOFD-00105402
SPIDs equals the
value of the
DlschPriorityFactor
parameter in the
StandardQci MO
multiplied by the
value of this
parameter. This
parameter is valid
only for QCIs 6 to 9.

t parameter for
specified-service
UEs. The value of
the
IntraFreqHoA3Offse
t parameter for
specified-service
UEs equals the
value of the
IntraFreqHoA3Offse
t parameter in the
IntraFreqHoGroup
MO plus the value
of this parameter. If
the value of the
IntraFreqHoA3Offse
t parameter for
specified-service
UEs is less than the NO NO NO TDLOFD-00105402
lower limit of or
greater than the
upper limit of the
IntraFreqHoA3Offse
t parameter in the
IntraFreqHoGroup
MO, the lower or
upper limit is
regarded as the
value of the
IntraFreqHoA3Offse
t parameter for
specified-service
UEs.
Specified-service
UEs refer to the
UEs with SPIDs
identified and the
hdRsrp or
InterFreqHoA2Thd
Rsrp parameter for
specified-service
UEs equals the
value of the
A3InterFreqHoA2T
hdRsrp or
InterFreqHoA2Thd
Rsrp parameter in
the
InterFreqHoGroup
MO plus the value
of this parameter. If
the value of the
A3InterFreqHoA2T
hdRsrp or
InterFreqHoA2Thd
Rsrp parameter for NO NO NO TDLOFD-00105402
specified-service
UEs is less than the
lower limit of or
greater than the
upper limit of the
A3InterFreqHoA2T
hdRsrp or
InterFreqHoA2Thd
Rsrp parameter in
the
InterFreqHoGroup
MO, the lower or
upper limit is
regarded as the
value of the
A3InterFreqHoA2T
hdRsrp or
InterFreqHoA2Thd
hdRsrq or
InterFreqHoA2Thd
Rsrq parameter for
specified-service
UEs equals the
value of the
A3InterFreqHoA2T
hdRsrq or
InterFreqHoA2Thd
Rsrq parameter in
the
InterFreqHoGroup
MO plus the value
of this parameter. If
the value of the
A3InterFreqHoA2T
hdRsrq or
InterFreqHoA2Thd
Rsrq parameter for NO NO NO TDLOFD-00105402
specified-service
UEs is less than the
lower limit of or
greater than the
upper limit of the
A3InterFreqHoA2T
hdRsrq or
InterFreqHoA2Thd
Rsrq parameter in
the
InterFreqHoGroup
MO, the lower or
upper limit is
regarded as the
value of the
A3InterFreqHoA2T
hdRsrq or
InterFreqHoA2Thd
Indicates whether a
UE is dedicated to
perform specific
services. This
parameter is
configured to
implement
differentiated
processing. Set this
parameter based
on the operator's
strategy. The value
SPECSERUSER
indicates that a UE NO NO NO TDLOFD-00105402
is dedicated to
perform specific
services. The value
NONE indicates a
common UE. If the
SpecifiedCellFlag
parameter in the
Cell MO is set to
SPECSERCELL(Sp
ecified service cell),
common UEs are
transferred out of
the cell.

TDLOFD-00105401
TDLOFD-001059
Indicates the ID of
TDLAOFD-001002
an SPID group,
TDLAOFD-
which identifies a
00100102
group of UEs YES YES NO
TDLAOFD-070201
whose SPIDs
TDLAOFD-
belong to the same
00100111
group.
MRFD-101231
TDLAOFD-110401
Indicates the start
SPID value. The
value of an SPID
defined in 3GPP TDLOFD-00105401
specifications TDLOFD-001059
ranges from 1 to TDLAOFD-001002
256. However, this TDLAOFD-
parameter can be 00100102
YES YES NO
set to 0. SPID 0 TDLAOFD-070201
indicates the UEs TDLAOFD-
that are not 00100111
configured with MRFD-101231
SPIDs or whose TDLAOFD-090401
SPIDs cannot be
identified by the
eNodeB.

Indicates the end

SPID value. The
value of an SPID
defined in 3GPP TDLOFD-00105401
specifications TDLOFD-001059
ranges from 1 to TDLAOFD-001002
256. However, this TDLAOFD-
parameter can be 00100102
YES YES NO
set to 0. SPID 0 TDLAOFD-070201
indicates the UEs TDLAOFD-
that are not 00100111
configured with MRFD-101231
SPIDs or whose TDLAOFD-110401
SPIDs cannot be
identified by the
eNodeB.

Indicates the start

LOFD-00105401 /
value of the SPID YES YES NO
TDLOFD-00105401
segment.

Indicates the end

LOFD-00105401 /
value of the SPID YES YES NO
TDLOFD-00105401
segment.
Indicates the mobile
country code (MCC)
of the HPLMN to
which SPID-specific
UEs are allowed to
be handed over. A
public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
LOFD-00105401 /
network code YES YES NO
TDLOFD-00105401
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of the
HPLMN to which
SPID-specific UEs
are allowed to be
handed over.
A public land mobile
network (PLMN) ID
is comprised of a
mobile country LOFD-00105401 /
YES YES NO
code (MCC) and an TDLOFD-00105401
MNC.
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the mobile
country code (MCC)
of a target radio
network controller
(RNC).
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
YES YES NO None
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of a target
radio network
controller (RNC).
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
YES YES NO None
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
comprised of the
RNC ID and the
RNC cell ID. In
RNC-ID mode, the
UTRAN cell ID is
represented by the
least significant 12
bits of the RNC ID
and the most
significant 16 bits of
the RNC cell ID.
The formula for
calculating the
UTRAN cell ID is as
follows: UTRAN cell
ID = RNC ID x
65536 + RNC cell
ID. In extended
RNC-ID mode, the YES YES NO None
UTRAN cell ID is
represented by the
least significant 16
bits of the RNC ID
and the most
significant 12 bits of
the RNC cell ID,
and the formula for
calculating the
UTRAN cell ID is as
follows: UTRAN cell
ID = RNC ID x 4096
+ RNC cell ID. The
value range of RNC
ID is (0–65535,
4294967295). A
value in the range
of 0–65535
UTRAN capabilities
are supported by
default.
PsHoCapCfg
indicates whether
PS handovers are
supported. If this
option is on, PS
handovers are
supported. If this LOFD-001022 /
option is off, PS TDLOFD-001022
handovers are not LOFD-001033 /
supported. TDLOFD-001033
SiByRimCapCfg LOFD-001052 /
indicates whether TDLOFD-001052
the capability of LOFD-001068 /
obtaining SI of the TDLOFD-001068
UTRAN through LOFD-001088 /
RIM procedures is TDLOFD-001088
NO NO NO
supported. If the LOFD-001019 /
option is on, TDLOFD-001019
obtaining SI of the LOFD-001043 /
UTRAN through TDLOFD-001043
RIM procedures is LOFD-001072 /
supported. If the TDLOFD-001072
option is off, LOFD-081283 /
obtaining SI of the TDLOFD-081203
UTRAN through LOFD-070202 /
RIM procedures is TDLOFD-081223
not supported.
VoipCapCfg
indicates the VoIP
capability of the
UTRAN. If this
option is on, the
VoIP is supported.
VoIP services
established in the

Indicates the ID of
YES YES NO None
the operator.

Indicates the QoS

class identifier
(QCI) of an evolved
packet system
(EPS) bearer.
Different QCIs
indicate different
QoS requirements, YES YES NO None
such as the packet
delay budget,
packet error loss
rate, and resource
type. For details,
see Table 6.1.7 in
3GPP TS 23.203.
Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 10 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 11 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 12 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 13 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 14 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 15 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 16 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 17 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 18 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 19 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 20 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 21 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the name

of an eNodeB
function, which
YES YES NO None
uniquely identifies
the eNodeB
function.
Indicates the ID of
the application
referenced by an
eNodeB function.
The application NO NO NO None
provides an
operating
environment for the
eNodeB function.
Indicates the
eNodeB ID defined
in the service
protocol interface,
which uniquely
NO NO NO None
identifies an
eNodeB within a
PLMN. For details,
see 3GPP TS
36.300.

Indicates user-
NO NO NO None
defined remarks.

Indicates model
definition version of
eNodeB resources,
including the
management object NO NO NO None
(MO) definition,
attribute definition,
and configuration
rules.
Indicates the
version of the
product. This NO NO NO None
parameter is valid
for version query.
Indicates the
network
identification code.
The value of this
parameter can
contain a maximum
YES YES NO None
of seven dots
(.).Modification to
this parameter
takes effect at the
next network
access of a UE.

This parameter
specifies the IP
NO NO NO None
address of the
primary DNS.
This parameter
specifies the IP
NO NO NO None
address of the
secondary DNS.
Indicates the ID of
the IP address pool
NO YES NO None
corresponding to
the APN.

Indicates the ID of
YES YES NO None
an APN template.

Indicates the APN

bound to the
subscriber
template. The
value of this
parameter can
contain a maximum NO YES NO None
of seven dots
(.).Modification to
this parameter
takes effect at the
next network
access of a UE.
Indicates an EPC-
inside QoS attribute
that is provided for
a service data flow
(SDF) as a
reference to a
specific packet
forwarding behavior
(such as packet
loss rate and
NO YES NO None
packet delay
budget). The packet
forwarding is
performed based
on the QCI-related
parameters that are
pre-configured on
the access network
node (such as the
eNodeB).

Indicates the
downlink aggregate
NO YES NO None
maximum bit rate
(AMBR) of the APN.
Indicates the uplink
aggregate
NO YES NO None
maximum bit rate
(AMBR) of the APN.

Indicates a QoS
attribute that
specifies the
relative importance
compared to other
bearers for
allocation and NO YES NO None
retention of the
bearer. Modification
to this parameter
takes effect at the
next network
access of a UE.

Indicates a QoS
attribute that
specifies whether
bearers can occupy
resources for low-
priority service data NO YES NO None
flows. Modification
to this parameter
takes effect at the
next network
access of a UE.

Indicates a QoS
attribute that
controls whether
resources for
service data flows
can be occupied by
high-priority service NO YES NO None
data flows.
Modification to this
parameter takes
effect at the next
network access of a
UE.

Indicates the local

ID of the EPC- YES YES NO TDLAOFD-080405
inside.

Indicates the ID of
the MME group in NO YES NO TDLAOFD-080405
the EPC-inside.

Indicates the code

of the MME in the NO YES NO TDLAOFD-080405
EPC-inside.
This parameter
specifies the full
NO NO NO None
name of a network
service provider.
This parameter
specifies the
abbreviation for the NO NO NO None
name of a network
service provider.

Indicates the
algorithm that the
EPC-inside
preferentially
selects to encrypt
NAS messages. For
example, if this NO NO NO TDLAOFD-080405
parameter is set to
EEA2, the EEA2
algorithm is
preferentially
selected to encrypt
NAS messages.

Indicates the
algorithm that the
EPC-inside
preferentially
selects to ensure
NAS message
integrity. If this
NO NO NO TDLAOFD-080405
parameter is set
to EIA2, the EIA2
algorithm is
preferentially
selected to ensure
NAS
message integrity.

This parameter
specifies the ID of YES YES NO None
an IP address pool.
Indicates the start
IP address.
Modification to this
parameter takes NO YES NO None
effect at the next
network access of a
UE.

Indicates the end IP

address.
Modification to this
parameter takes NO YES NO None
effect at the next
network access of a
UE.

Indicates the mask

of an address pool.
Modification to this
parameter takes NO YES NO None
effect at the next
network access of a
UE.

This parameter
specifies the local
LAOFD-
ID of a subscriber. It
YES YES NO 080206/TDLAOFD-
uniquely identifies a
080405
subscriber within an
eNodeB.

This parameter
specifies the O&M
IP address of an
RRN. Modification
NO YES NO TDLAOFD-080405
to this parameter
leads to network
exit and reaccess of
the RRN.

This parameter
specifies the time
NO NO YES None
when the software
is activated.
Indicates the
destination IP
address of the
extended DHCP
server. The DHCP LAOFD-
packets sent from NO NO NO 080206/TDLAOFD-
the downstream 080405
eNodeB to an RRN
are relayed to this
destination IP
address.

This parameter
specifies the
destination IP
address of the
DHCP server. The
DHCP packets sent
NO YES NO TDLAOFD-080405
from the
downstream base
station to an RRN
are relayed to this
destination IP
address.

This parameter
specifies the path
where a file is
saved on the FTP
server. If this
parameter is not
set, the default path
configured for the
FTP server is used.
The FTP server and
the operating NO NO YES None
system on which
the FTP server
software runs
determine whether
an absolution or
relative path is
supported and
supported path
formats. For details,
see "Example."
This parameter
specifies whether
NO NO YES None
the RRN reports the
download progress.
This parameter
specifies the IP
NO NO YES None
address of the FTP
server.
This parameter
specifies the
password for NO NO YES None
logging in to the
FTP server.
This parameter
specifies the RRN NO NO YES None
reset mode.

This parameter
specifies the
software NO NO YES None
status:available or
unavailable.

This parameter
specifies the area
NO NO YES None
where the software
is stored.

This parameter
specifies the RRN NO NO YES None
software version.

This parameter
specifies the user
NO NO YES None
name for logging in
to the FTP server.
Indicates whether
the RRN performs
synchronous NO NO NO TDLAOFD-080405
Ethernet clock
broadcast.
Indicates the type
of files stored in an
RRN, which can be
inventory files or log
NO NO YES TDLAOFD-080405
files. This
parameter applies
only to LTE TDD
networks.
Indicates the relay
type of an RRN,
which can be L3
Relay (IP Based) or
L2 Relay (MAC NO NO NO TDLAOFD-080405
Based). This
parameter applies
only to LTE TDD
networks.
Indicates the
interface ID
assigned to the
O&M channel of an
RRN. This
parameter applies
NO NO NO TDLAOFD-080405
only to LTE TDD
networks and is
valid only if the
RelayType
parameter is set to
L2(L2).

Indicates the
interface ID
assigned to the
service channel of
an RRN. This
parameter applies
NO NO NO TDLAOFD-080405
only to LTE TDD
networks and is
valid only if the
RelayType
parameter is set to
L2(L2).

Indicates the aging

time of the dynamic
MAC address of an
RRN. This
parameter is valid
only if the
RelayType
parameter is set to
NO NO NO TDLAOFD-080405
L2(L2). If this
parameter is set to
0, the dynamic
MAC address is not
aged. This
parameter applies
only to LTE TDD
networks.

Indicates whether
the RRN adds a
VLAN tag in the
O&M data. This
parameter applies
only to LTE TDD NO NO NO TDLAOFD-080405
networks and is
valid only if the
RelayType
parameter is set to
L2(L2).
Indicates the value
of VLAN ID in the
VLAN tag contained
in the O&M data of
an RRN. This
parameter applies
only to LTE TDD
networks and is NO NO NO TDLAOFD-080405
valid only if the
RelayType
parameter is set to
L2(L2) and the
RrnVlanTagSwitch
parameter is set to
ON(ON).

Indicates the value

of VLAN Priority in
the VLAN tag
contained in the
O&M data of an
RRN. This
parameter applies
only to LTE TDD
NO NO NO TDLAOFD-080405
networks and is
valid only if the
RelayType
parameter is set to
L2(L2) and the
RrnVlanTagSwitch
parameter is set to
ON(ON).

Indicates an RRN
information report.
This parameter NO NO YES TDLAOFD-080405
applies only to LTE
TDD networks.
BasicInfo,
KeyUpdInfo,
MacTableQuery,
and
MacTableQuery-
XXXX-XXXX-
XXXX-Num.
BasicInfo indicates
that the basic
information of the
RRN is to be
queried,
KeyUpdInfo
indicates that the
OP/K update
records of the RRN
are to be queried,
MacTableQuery
indicates that a NO NO YES TDLAOFD-080405
maximum of 40
valid MAC entries in
the MAC forwarding
table on the RRN
are to be queried,
and
MacTableQuery-
XXXX-XXXX-
XXXX-Num
indicates that a
maximum of N
(specified by Num)
valid MAC entries
from the MAC
address "XXXX-
XXXX-XXXX" in the
MAC forwarding
table on the RRN
Indicates the
subnet mask of the
O&M IP
address of an RRN.
This parameter is
valid only if the
NO NO NO TDLAOFD-080405
RelayType
parameter is set to
L2(L2). This
parameter applies
only to LTE TDD
networks.

Indicates the local

ID of a subscriber. It LAOFD-
uniquely identifies a YES YES NO 080206/TDLAOFD-
subscriber within an 080405
eNodeB.
Indicates the IP
address of the LAN YES YES NO TDLAOFD-080405
port on an RRN.
Indicates the
subnet mask of the
IP address of the NO YES NO TDLAOFD-080405
LAN port on an
RRN.
This parameter
specifies the local
ID of a subscriber. It
YES YES NO TDLAOFD-080405
uniquely identifies a
subscriber within an
eNodeB.
Indicates the
transmission port
YES YES NO TDLAOFD-080405
number on the
RRN.
Indicates the switch
controlling the
NO YES NO TDLAOFD-080405
transmission port
on the RRN.
This parameter
specifies the ID of
YES YES NO TDLAOFD-080405
an IP route on an
RRN.

This parameter
specifies the local
LAOFD-
ID of a subscriber. It
NO YES NO 080206/TDLAOFD-
uniquely identifies a
080405
subscriber within an
eNodeB.

This parameter
specifies the
destination IP
address of the route NO YES NO TDLAOFD-080405
from an RRN to the
downstream base
station.

This parameter
specifies the subnet
mask of the
destination IP
NO YES NO TDLAOFD-080405
address of the route
from an RRN to the
downstream base
station.
This parameter
specifies the next-
hop IP address of
the route from an NO YES NO TDLAOFD-080405
RRN to the
downstream base
station.

This parameter
specifies the local
TDLAOFD-
ID of a subscriber. It
YES YES NO 080405,TDLOFD-
uniquely identifies a
080206
subscriber within an
eNodeB.

This parameter
specifies the type of
a subscriber. The
value UE indicates
a subscriber using
a UE. The value TDLAOFD-
RRN indicates a NO YES NO 080405,TDLOFD-
subscriber using an 080206
RRN. Modification
to this parameter
takes effect at the
next network
access of a UE.

Indicates the
number that
uniquely identifies a
UE. It is stored on
the SIM card of the
UE and sent to the
eNodeB during NO YES NO None
network access.
Modification to this
parameter takes
effect at the next
network access of a
UE.
Indicates the ID that
uniquely identifies
an RRN. It is
equivalent to the
IMSI. This ID is
stored on the RRN,
and sent to the
eNodeB when the NO YES NO TDLAOFD-080405
RRN accesses the
network.
Modification to this
parameter takes
effect at the next
network access of a
UE.

This parameter
specifies the ID of
the cell serving an
RRN. The
combination of this
parameter and the
eNodeB ID forms
the E-UTRAN cell
identifier. The
combination of the
E-UTRAN cell
identifier and the NO YES NO TDLAOFD-080405
PLMN ID forms the
E-UTRAN cell
global identifier
(ECGI). For details,
see 3GPP TS
36.413.
Modification to this
parameter takes
effect at the next
network access of a
UE.

This parameter
specifies a key for
subscriber
authentication
during network TDLAOFD-
access. NO YES NO 080405,TDLOFD-
Modification to this 080206
parameter takes
effect at the next
network access of
the subscriber.
This parameter is
an input parameter
involved in
calculation for
subscriber TDLAOFD-
authentication. NO YES NO 080405,TDLOFD-
Modification to this 080206
parameter takes
effect at the next
network access of
the subscriber.

This parameter
specifies the uplink
AMBR available for
NO NO NO TDLAOFD-080405
all the non-GBR
bearers of a
subscriber.

This parameter
specifies the
downlink AMBR
NO NO NO TDLAOFD-080405
available for all the
non-GBR bearers
of a subscriber.

Indicates the ID of
the subscriber
template bound to a
subscriber.
Modification to this NO YES NO None
parameter takes
effect at the next
network access of a
UE.

This parameter
provides the
description about a
subscriber,
including the
functions and
location.This NO NO NO TDLAOFD-080405
parameter should
be displayed and
configured only if
the parameter
SubscriberType is
configured as RRN.
This parameter
specifies the ID of a
YES YES NO None
subscriber
template.

Indicates the ID of
an APN template.
Modification to this
parameter takes NO YES NO None
effect at the next
network access of a
UE.

This parameter
specifies the name
NO NO NO None
of a subscriber
template.

Indicates whether
the second PDN
connection
configured in the
user template takes NO NO NO None
effect. This
parameter applies
only to LTE TDD
cells.

Indicates the ID of
the secondary APN
template for second NO NO NO None
PDN connection
configuration.
Indicates the
extended QCI of an
E-RAB on an RRN.
After an RRN
successfully
accesses the
network, the YES YES NO TDLAOFD-080405
eNodeB sets up a
bearer with the
extended QCI
specified by this
parameter for the
RRN.

This parameter
specifies whether a
bearer on an RRN
is a default bearer.
NO NO NO TDLAOFD-080405
A maximum of one
default bearer can
be configured for an
RRN.

This parameter
specifies the ID of
NO NO NO TDLAOFD-080405
an RLC/PDCP
parameter group.
Indicates the
scheduling type of
an E-RAB on an
RRN. The value PQ
indicates that the
scheduling for a
bearer is based on
the absolute priority.
The value WFQ LAOFD-
indicates that the NO NO NO 080206/TDLAOFD-
fair scheduling for a 080405
bearer is based on
the value of
UlSchWeight or
DlSchWeight. The
priority of a PQ
bearer is always
higher than that of a
WFQ bearer.
This parameter
indicates the uplink
resource allocation
weighting factor for
a weighted fair
queuing (WFQ)
NO NO NO TDLAOFD-080405
bearer. This
parameter is valid
only when the
SchedulingType
parameter is set to
WFQ.

This parameter
indicates the
downlink resource
allocation weighting
factor for a WFQ LAOFD-
bearer. This NO NO NO 080206/TDLAOFD-
parameter is valid 080405
only when the
SchedulingType
parameter is set to
WFQ.
This parameter
specifies the lower
limit of the DSCP
value contained in NO NO NO TDLAOFD-080405
the IP packets
mapped to a bearer
on an RRN.

This parameter
specifies the upper
limit of the DSCP
value contained in NO NO NO TDLAOFD-080405
the IP packets
mapped to a bearer
on an RRN.

Indicates the
service
preallocation weight
of the RRN. If
priority queuing
(PQ) is configured,
the preallocation
weight of services
corresponding to
the PQ is used.
Otherwise, the
preallocation weight
of services
corresponding to
the largest NO NO NO TDLAOFD-080405
weighted fair
queuing (WFQ) is
used. Preallocation
possibilities are
proportional to
preallocation
weights. When
resources are
limited, the
preallocation weight
affects the
preallocation
possibilities for an
RRN.
Indicates the PQ
bearer type when
the SchType
parameter is set to
PQ(PQ). The value
L3PQ indicates the
PQ bearer of L3
Relay. The value
L2OM indicates the
RRN O&M PQ
bearer of L2 Relay.
The value L2HIGH
indicates the high- NO NO NO TDLAOFD-080405
priority PQ bearer
of L2 Relay. The
value L2LOW
indicates the low-
priority PQ bearer
of L2 Relay. A
maximum of one
bearer of each type
can be configured.
This parameter
applies only to LTE
TDD networks.
When the UE
detects that the
signal quality in the
serving cell and that
in at least one intra-
frequency
neighboring cell
meet the entering
condition, it does
not immediately
send an ANR-
based
measurement
report to the
eNodeB. Instead,
the UE sends a
report only when
the signal quality
meets the entering NO NO NO TDLOFD-002001
condition
throughout the
hysteresis.
This parameter
helps decrease the
number of
occasionally
triggered event
reports and invalid
decisions on
triggering intra-
frequency ANR.
This parameter
must be set to a
value smaller than
or equal to that of
the
IntraFreqHoA3Time
Indicates the
hysteresis for the
ANR-based intra-
frequency
measurement
event. This
parameter is used
to decrease the
number of invalid
decisions on
triggering intra-
frequency ANR due
to radio signal NO NO NO TDLOFD-002001
fluctuations. This
parameter must be
set to a value
smaller than or
equal to that of the
IntraFreqHoA3Hyst
parameter.
In the current
version, this
parameter is
dedicated to LTE
TDD cells.
Indicates the offset
for the signal quality
in an neighboring
cell against that in
the serving cell in
the ANR-based
intra-frequency
measurement. A
large value
indicates that a
neighboring cell
must have a better
quality than the
serving cell for
NO NO NO TDLOFD-002001
reporting the ANR
measurement
report. This
parameter must be
set to a value
smaller than or
equal to that of the
IntraFreqHoA3Offse
t parameter.
In the current
version, this
parameter is
dedicated to LTE
TDD cells.
event.
When the UE
detects that the
signal quality in the
serving cell and that
in at least one inter-
frequency
neighboring cell
meet the entering
condition, it does
not immediately
send an ANR-
based
measurement
report to the
eNodeB. Instead,
the UE sends a
report only when
the signal quality
NO NO NO TDLOFD-002001
meets the entering
condition
throughout the
hysteresis.
This parameter
helps decrease the
number of
occasionally
triggered event
reports and invalid
decisions on
triggering inter-
frequency ANR.
This parameter
must be set to a
value smaller than
or equal to the
InterFreqHoA4Time
ToTrig parameter.
Indicates the
hysteresis for the
ANR-based inter-
frequency
measurement
event. This
parameter is used
to decrease the
number of invalid
decisions on
triggering inter-
frequency ANR due
to radio signal NO NO NO TDLOFD-002001
fluctuations. This
parameter must be
set to a value
smaller than or
equal to the
InterFreqHoA4Hyst
parameter.
In the current
version, this
parameter is
dedicated to LTE
TDD cells.
Indicates the RSRP
threshold for
triggering the ANR-
based inter-
frequency
measurement
event. When the
measured RSRP
value exceeds the
threshold, an ANR-
based inter-
frequency
measurement NO NO NO TDLOFD-002001
report is sent. This
parameter must be
set to a value
smaller than or
equal to that of the
InterFreqHoA4Thd
Rsrp parameter.
In the current
version, this
parameter is
dedicated to LTE
TDD cells.

Indicates the length

of the counter
check timer. When
the timer expires, a
counter check
procedure is
initiated. After the
procedure is
LBFD-002004 /
complete, the timer NO NO NO
TDLBFD-002004
is restarted. A
length of 0 indicates
that the timer is
invalid. In this case,
the eNodeB cannot
initiate periodic
counter check
procedures.
Indicates the
COUNT value for
initiating counter
check procedures.
When the COUNT
value (used at the
PDCP layer) of any
DRB for a UE is a
multiple of the value
of this parameter, LBFD-002004 /
NO NO NO
the eNodeB TDLBFD-002004
initiates a counter
check procedure.
The value 0
indicates that the
eNodeB does not
initiate a counter
check procedure
based on the
COUNT value.

Indicates whether
to release a DRB
when the counter LBFD-002004 /
NO NO NO
check detects an TDLBFD-002004
unexpected result
in the DRB.

Indicates the
highest-priority LOFD-00101001 /
ciphering algorithm TDLOFD-00101001
supported by the LOFD-00101002 /
NO NO NO
eNodeB. The value TDLOFD-00101002
NULL indicates that LOFD-00101003 /
ciphering is not TDLOFD-00101003
applied.
Indicates the
second-priority LOFD-00101001 /
ciphering algorithm TDLOFD-00101001
supported by the LOFD-00101002 /
NO NO NO
eNodeB. The value TDLOFD-00101002
NULL indicates that LOFD-00101003 /
ciphering is not TDLOFD-00101003
applied.

Indicates the third-

priority ciphering LOFD-00101001 /
algorithm supported TDLOFD-00101001
by the eNodeB. The LOFD-00101002 /
NO NO NO
value NULL TDLOFD-00101002
indicates that LOFD-00101003 /
ciphering is not TDLOFD-00101003
applied.

Indicates the fourth-

priority ciphering LOFD-00101001 /
algorithm supported TDLOFD-00101001
by the eNodeB. The LOFD-00101002 /
NO NO NO
value NULL TDLOFD-00101002
indicates that LOFD-00101003 /
ciphering is not TDLOFD-00101003
applied.
Indicates the timer
governing the
period that the
eNodeB waits for a
response message
from the MME when
the eNodeB does
not perform an S1-
based handover for
a UE running non-
QCI1 services. If
the timer expires,
the eNodeB
initiates a UE
context release NO NO NO None
over the S1
interface. If the
eNodeB performs
an S1-based
handover for a UE
running services
with a QCI of 1, the
S1MessageWaiting
Timer parameter
controls the period
that the eNodeB
waits for a
response message
from the MME.
Indicates the timer
governing the
period the local
eNodeB waits for a
response message
from the peer
eNodeB when the
UE is running non-
QCI1 services. If
the eNodeB
performs an X2-
based handover for NO NO NO None
a UE running
services with the
QCI of 1, the
X2MessageWaiting
TimerQci1
parameter controls
the period that the
eNodeB waits for a
response message
from the peer
eNodeB.
Indicates the timer
governing the
period the eNodeB
waits for a
response message
from a UE when the
UE is running non-
NO NO NO None
QCI1 services. If
the timer expires,
the eNodeB
initiates a UE
context release
over the S1
interface.

Indicates the timer

for the eNodeB to
wait for a handover
preparation
completion
message when a
UE is handed over
to a CDMA2000
1xRTT cell. The
eNodeB starts the
LOFD-001090 /
timer after sending NO NO NO
TDLOFD-001090
a Handover From
EUTRA Preparation
Request message
to the UE and stops
the timer after
receiving a UL
Handover
Preparation
Transfer message
from the UE.
Indicates the timer
for the eNodeB to
wait for a Downlink
S1 CDMA2000
Tunneling message
when a UE is
handed over to a
CDMA2000 1xRTT
cell. The eNodeB
starts the timer after
sending an UPLINK LOFD-001090 /
NO NO NO
S1 CDMA2000 TDLOFD-001090
TUNNELING
message to the
MME and stops the
timer after receiving
a Downlink S1
CDMA2000
Tunneling message
containing
CDMA2000 HO
Status.

Indicates the timer

for the eNodeB to
release resources
for a UE after the
UE is handed over
to a CDMA2000
LOFD-001090 /
1xRTT cell. The NO NO NO
TDLOFD-001090
eNodeB starts the
timer after sending
a
MobilityFromEUTR
ACommand
message.
Indicates the timer
for the eNodeB to
release resources
for a UE after the
UE is handed over
to a CDMA2000
LOFD-001021 /
HRPD cell. The NO NO NO
TDLOFD-001021
eNodeB starts the
timer after sending
a
MobilityFromEUTR
ACommand
message.
Indicates the timer
for the eNodeB to
wait for a Downlink
S1 CDMA2000
Tunneling message
when a UE is
handed over to a
CDMA2000 HRPD
cell. The eNodeB
starts the timer after
sending an UPLINK LOFD-001021 /
NO NO NO
S1 CDMA2000 TDLOFD-001021
TUNNELING
message to the
MME and stops the
timer after receiving
a Downlink S1
CDMA2000
Tunneling message
containing
CDMA2000 HO
Status.

Indicates the timer

for the eNodeB to
wait for a handover
preparation
completion
message when a
UE is handed over
to a CDMA2000
HRPD cell. The
eNodeB starts the
LOFD-001021 /
timer after sending NO NO NO
TDLOFD-001021
a Handover From
EUTRA Preparation
Request message
to the UE and stops
the timer after
receiving a UL
Handover
Preparation
Transfer message
from the UE.
Indicates the timer
for the eNodeB to
wait for a RRC NO NO NO None
Connection Setup
Complete.

Indicates the timer

for the eNodeB to
wait for a Security
Mode Complete
message.If the
UuMsgSimulSendS
witch parameter is
set to ON, this
parameter does not NO NO NO None
take effect and the
timer for the
eNodeB to wait for
a Security Mode
Complete message
is specified by the
UuMessageWaiting
Timer parameter.
Indicates the timer
for the eNodeB to
wait for an
unprotected UE NO NO NO None
Capability
Information
message.

Indicates the timer

for the eNodeB to
NO NO NO None
wait for the first
forwarded packet.
Indicates the timer
for the eNodeB to
NO NO NO None
wait for the
endmarker packet.

Indicates the timer

governing the
period that the
eNodeB waits for a
response message
from the MME when
the UE are running LBFD-002007 /
NO NO NO
services with the TDLBFD-002007
QCI of 1. If the
timer expires, the
eNodeB initiates a
UE context release
over the S1
interface.
Indicates the timer
governing the
period the local
eNodeB waits for a
response message
from the peer
eNodeB when the
UE is running
services with the LOFD-002007 /
NO NO NO
QCI of 1. If the TDLOFD-002007
timer expires, the
eNodeB processes
the same as the
timer specified by
the
X2MessageWaiting
Timer parameter
expires.

Indicates the timer

governing the
period the eNodeB
waits for a
response message
from a UE when the
UE is running LBFD-002007 /
NO NO NO
services with the TDLBFD-002007
QCI of 1. If the
timer expires, the
eNodeB initiates a
UE context release
over the S1
interface.
Indicates the
threshold used to
determine bearer
activity. The
eNodeB
consistently
monitors the
consecutive no-
transmission
NO NO NO None
duration for each
bearer. If the
duration for a
bearer is less than
or equal to the
threshold, the
eNodeB determines
that the bearer is
active.

Indicates the
highest-priority
LBFD-002004 /
integrity protection NO NO NO
TDLBFD-002004
algorithm supported
by the eNodeB.

Indicates the
second-priority
LBFD-002004 /
integrity protection NO NO NO
TDLBFD-002004
algorithm supported
by the eNodeB.

Indicates the third-

priority integrity
LBFD-002004 /
protection algorithm NO NO NO
TDLBFD-002004
supported by the
eNodeB.
Indicates whether
the eNodeB can
use the null
algorithm for
integrity protection.
If this switch is
turned off, the null
algorithm cannot be
used for integrity
protection. When
this switch is turned
off, the eNodeB LBFD-002004 /
NO NO NO
selects an integrity TDLBFD-002004
protection algorithm
based on the
algorithm priorities
specified by
PrimaryIntegrityAlg
o,
SecondIntegrityAlg
o, and
ThirdIntegrityAlgo,
but skips the null
algorithm.

Indicates the type

allocation code
(TAC) in the
IMEISV of UEs. The
TAC identifies the
UE model.For YES YES NO None
details about the
definition of
IMEISV, see section
6.2.2 in 3GPP TS
23.003.

Indicates the
software version
number (SVN)
which is an element
of the international
mobile station
equipment identity
and software
YES YES NO None
version (IMEISV)
and specifies the
software version of
UEs. For details
about the definition
of IMEISV, see
section 6.2.2 in
3GPP TS 23.003.
Indicates the
description of the NO NO NO None
model of UE.

SPID for the service

policy applied to
UEs running
unlimited services.
SPID 256 is used
by default.
If the
UsBasedSpecificIP
Add(UsBasedSpeci
ficIPAdd option is
selected, the
eNodeB identifies
UEs running
unlimited services
based on IP
address of the
server dedicated to
UEs running
unlimited services.
NO NO NO None
Operators need to
configure the
parameters related
to the server
dedicated to UEs
running unlimited
services.
If the
UsBasedSpecificTr
aceID(UsBasedSpe
cificTraceID) option
is selected, the
eNodeB identifies a
UE as a UE running
unlimited services if
an end-to-end
tracing task with a
dedicated trace ID
starts for the UE.
Indicates the SPID
for UEs running NO NO NO None
unlimited services.

Indicates the length

of the UE inactivity
timer for UEs. If the
eNodeB detects
that such a UE has
neither received nor
sent data for a
duration exceeding
the value of this
parameter, the
eNodeB releases
NO NO NO None
the RRC
connection for the
UE. If this
parameter is set to
0, the UE inactivity
timer is not used. If
the parameter
setting is changed,
the change applies
to UEs that newly
access the network.

Indicates the packet

interval at which the
eNodeB parses the
IP headers of the NO NO NO None
downlink packets
for UEs running
unlimited services.
Indicates the weight
factor used to
calculate DL
scheduling priorities
for UEs running
unlimited services. NO NO NO None
This parameter is
used to
preferentially
ensure services for
such UEs.

Indicates the weight

factor used to
calculate the
connection priorities
during UL
NO NO NO None
scheduling for
large-packet
services of UEs
running unlimited
services.

Indicates the weight

factor used to
calculate the
connection priorities
during UL
NO NO NO None
scheduling for
small-packet
services of UEs
running unlimited
services.
Indicates the length
of the S-TMSI
keep-alive timer for
UEs running
unlimited services.
When the eNodeB
detects such a UE
based on the IP
address of a
dedicated server,
the eNodeB starts
the S-TMSI keep-
alive timer for the
UE. If the UE
initiates an RRC
connection setup
procedure towards
the eNodeB before NO NO NO None
the timer expires,
the eNodeB treats
the UE as an
unlimited-service
UE. If the UE
initiates the
procedure after the
timer expires, the
eNodeB treats the
UE as a common
UE. For details
about S-TMSIs, see
3GPP TS 36.331. If
this parameter is
set to 0, the timer
mechanism does
not take effect.
Indicates whether
to use the
identification policy
to identify services
with large packets.
If the buffered data
volume to be
transmitted for a UE
exceeds a certain
threshold, the UE is
identified as a UE
running large-
packet services,
which is also
regarded as a UE
running unlimited
services. If this
NO NO NO None
parameter is set to
ON, a UE is
identified as a UE
running unlimited
services when its
buffered data
volume and the
number of
scheduling times
reach certain
thresholds. If this
parameter is set to
OFF, UEs running
unlimited services
are not identified
based on the
identification policy.

Indicates the index

of the trace ID for
YES YES NO None
UEs running
unlimited services.
Indicates the trace
ID for UEs running
unlimited services
(US UEs). This
parameter is valid
only if the
UsBasedSpecificTr
aceID option of the
UsStrategy NO YES NO None
parameter is
selected. If the
UsTraceID
parameter is set to
4294967295, the
eNodeB identifies
UEs with any trace
ID as US UEs.

Indicates whether
to enable ROHC.
Set this parameter
to ON if the LOFD-001017 /
NO NO NO
eNodeB is TDLOFD-001017
expected to support
VoIP or video
services.
and a feedback
channel is not
mandatory.
Therefore, U-Mode
is less reliable than
Bidirectional
Optimistic Mode (O-
Mode) and
Bidirectional
Reliable Mode (R-
Mode), but its
feedback-induced
overhead is
minimum compared
with the overhead
in O-Mode and R-
Mode. In O-Mode,
the decompressor
LOFD-001017 /
can send feedback NO NO NO
TDLOFD-001017
messages to the
compressor to
indicate
decompression
failures or
successful context
updates. O-Mode is
more reliable than
U-Mode and
requires a smaller
amount of feedback
than R-Mode. In R-
Mode, the reliability
of context
synchronization
between the
compressor and the
decompressor is
supported by the
eNodeB.
Under the ROHC
framework, header
compression
algorithms vary with
protocols. Profiles
define the header
compression
protocols (such as
RTP/UDP/IP or
TCP/IP), which are
under the same
ROHC framework,
for specific types of
packet streams.
Each profile has a
unique identifier.
As defined by LTE LOFD-001017 /
NO NO NO
specifications, the TDLOFD-001017
eNodeB supports
the following
profiles: profile
0x0001 (usage:
RTP/UDP/IP;
reference: RFC
3095 and RFC
4815), profile
0x0002 (usage:
UDP/IP; reference:
RFC 3095 and RFC
4815), profile
0x0003 (usage:
ESP/IP; reference:
RFC 3095 and RFC
4815), and profile
0x0004 (usage: IP;
reference: RFC

LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
Indicates the ID of
TDLAOFD-001002
the private CA band
LAOFD-00100202 /
combination. It
TDLAOFD-
uniquely identifies a YES YES NO
00100202
private CA band
LAOFD-070201 /
combination in an
TDLAOFD-070201
eNodeB.
LAOFD-070202
TDLAOFD-
00100111
 LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
Indicates the
TDLAOFD-001002
maximum
LAOFD-00100202 /
aggregated
TDLAOFD-
bandwidth NO YES NO
00100202
supported by the
LAOFD-070201 /
CA band
TDLAOFD-070201
combination.
LAOFD-070202
TDLAOFD-
00100111

Indicates the
protocol-defined ID
LAOFD-00100101
of a CA bandwidth
LAOFD-00100102
combination set. As
LAOFD-00100201 /
defined in 3GPP TS
TDLAOFD-001002
36.101, an
LAOFD-00100202 /
operating frequency
TDLAOFD-
band supports NO YES NO
00100202
different bandwidth
LAOFD-070201 /
combinations,
TDLAOFD-070201
which are identified
LAOFD-070202
by using different
TDLAOFD-
set IDs. For details,
00100111
see section 5.6A.1
in 3GPP TS 36.301.
 LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-001002
Indicates LAOFD-00100202 /
combination band TDLAOFD-
NO NO NO
1. For details, see 00100202
3GPP TS 36.101. LAOFD-070201 /
TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111

LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-001002
Indicates LAOFD-00100202 /
combination band TDLAOFD-
NO NO NO
2. For details, see 00100202
3GPP TS 36.101. LAOFD-070201 /
TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111
 LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
Indicates
TDLAOFD-001002
combination band
LAOFD-00100202 /
3. For details, see
TDLAOFD-
3GPP TS 36.101. If NO NO NO
00100202
the value is 0,
LAOFD-070201 /
combination band 3
TDLAOFD-070201
is invalid.
LAOFD-070202
TDLAOFD-
00100111

LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
Indicates
TDLAOFD-001002
combination band
LAOFD-00100202 /
4. For details, see
TDLAOFD-
3GPP TS 36.101. If NO NO NO
00100202
the value is 0,
LAOFD-070201 /
combination band 4
TDLAOFD-070201
is invalid.
LAOFD-070202
TDLAOFD-
00100111
Indicates the
bandwidth
combination of
combination band
1. If a bandwidth is
selected, the carrier
with the
corresponding
bandwidth in
combination band 1
LAOFD-00100101
is supported in the
LAOFD-00100102
private CA
LAOFD-00100201 /
combination band.
TDLAOFD-001002
Selected
LAOFD-00100202 /
bandwidths must be
TDLAOFD-
identical to NO NO NO
00100202
configured cell
LAOFD-070201 /
bandwidths.
TDLAOFD-070201
Otherwise, the
LAOFD-070202
eNodeB may
TDLAOFD-
mistakenly
00100111
determine that a
bandwidth that a
UE does not
support is
supported in the
private CA
combination band,
causing CA
configuration
failures.
Indicates the
bandwidth
combination of
combination band
2. If a bandwidth is
selected, the carrier
with the
corresponding
bandwidth in
combination band 2
LAOFD-00100101
is supported in the
LAOFD-00100102
private CA
LAOFD-00100201 /
combination band.
TDLAOFD-001002
Selected
LAOFD-00100202 /
bandwidths must be
TDLAOFD-
identical to NO NO NO
00100202
configured cell
LAOFD-070201 /
bandwidths.
TDLAOFD-070201
Otherwise, the
LAOFD-070202
eNodeB may
TDLAOFD-
mistakenly
00100111
determine that a
bandwidth that a
UE does not
support is
supported in the
private CA
combination band,
causing CA
configuration
failures.
Indicates the
bandwidth
combination of
combination band
3. If a bandwidth is
selected, the carrier
with the
corresponding
bandwidth in
combination band 3
LAOFD-00100101
is supported in the
LAOFD-00100102
private CA
LAOFD-00100201 /
combination band.
TDLAOFD-001002
Selected
LAOFD-00100202 /
bandwidths must be
TDLAOFD-
identical to NO NO NO
00100202
configured cell
LAOFD-070201 /
bandwidths.
TDLAOFD-070201
Otherwise, the
LAOFD-070202
eNodeB may
TDLAOFD-
mistakenly
00100111
determine that a
bandwidth that a
UE does not
support is
supported in the
private CA
combination band,
causing CA
configuration
failures.
Indicates the
bandwidth
combination of
combination band
4. If a bandwidth is
selected, the carrier
with the
corresponding
bandwidth in
combination band 4
LAOFD-00100101
is supported in the
LAOFD-00100102
private CA
LAOFD-00100201 /
combination band.
TDLAOFD-001002
Selected
LAOFD-00100202 /
bandwidths must be
TDLAOFD-
identical to NO NO NO
00100202
configured cell
LAOFD-070201 /
bandwidths.
TDLAOFD-070201
Otherwise, the
LAOFD-070202
eNodeB may
TDLAOFD-
mistakenly
00100111
determine that a
bandwidth that a
UE does not
support is
supported in the
private CA
combination band,
causing CA
configuration
failures.

LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
Indicates TDLAOFD-001002
combination band LAOFD-00100202 /
5. For details, see TDLAOFD-
3GPP TS 36.101. If NO NO NO 00100202
the value is 0, LAOFD-070201 /
combination band 5 TDLAOFD-070201
is invalid. LAOFD-070202
TDLAOFD-
00100111
LAOFD-110201
Indicates the
bandwidth
combination of
combination band
5. If a bandwidth is
selected, the carrier
with the
corresponding
bandwidth in
combination band 5 LAOFD-00100101
is supported in the LAOFD-00100102
private CA LAOFD-00100201 /
combination band. TDLAOFD-001002
Selected LAOFD-00100202 /
bandwidths must be TDLAOFD-
identical to NO NO NO 00100202
configured cell LAOFD-070201 /
bandwidths. TDLAOFD-070201
Otherwise, the LAOFD-070202
eNodeB may TDLAOFD-
mistakenly 00100111
determine that a LAOFD-110201
bandwidth that a
UE does not
support is
supported in the
private CA
combination band,
causing CA
configuration
failures.
Indicates whether
the private CA band
combination
conflicts with
solidified CA band
combinations
supported by an
eNodeB. The
solidified CA band
combinations
supported by the
eNodeB include the
solidified private CA
band combinations LAOFD-00100101
and 3GPP-defined LAOFD-00100102
CA band LAOFD-00100201 /
combinations of the TDLAOFD-001002
related protocol LAOFD-00100202 /
version that the TDLAOFD-
NO NO YES
eNodeB complies 00100202
with. If a conflict LAOFD-070201 /
occurs, the eNodeB TDLAOFD-070201
preferentially uses LAOFD-070202
the private CA band TDLAOFD-
combination 00100111
configured in the
PrivateCaBandCom
b MO to match with
the CA capabilities
of UEs. For details
about the solidified
CA band
combinations
supported by the
eNodeB, see carrier
aggregation feature
parameter
description.
Indicates the length
of timer T302.
T302 specifies the
time during which a
UE whose RRC
connection request
is rejected has to
wait before the UE
can initiate a
request again. LBFD-002007 /
NO NO NO
This timer is started TDLBFD-002007
when the UE
receives an
RRCConnectionRej
ect message and
stopped when the
UE enters the
RRC_CONNECTE
D mode or performs
cell reselection.
Indicates the length
of timer T320 for
load balancing.
T320 specifies the
time period during
which the dedicated
priorities (used for
cell reselection)
retain valid. The
time period is
contained in the
RRCConnectionRel
ease message that
is received by the
UE. After T320
NO NO NO None
expires, the
dedicated priorities
become invalid.
This timer is started
when the UE
receives an
RRCConnectionRel
ease message
containing the t320
IE.
This timer is
stopped when the
UE enters the
RRC_CONNECTE
D mode.

Indicates the length

of timer T304 for
intra-RAT handover.
If the UE does not
complete the
handover before
this timer expires,
NO NO NO None
the UE reverts back
to the associated
configuration and
initiates an RRC
connection
reestablishment
procedure.
Indicates the length
of timer T304 for
inter-RAT handover
to GERAN. If the
UE does not
complete the
handover before
this timer expires, NO NO NO None
the UE reverts back
to the associated
configuration and
initiates an RRC
connection re-
establishment
procedure.

Indicates the length

of timer T320 to be
contained in
RRCConnectionRel
ease messages
sent for reasons
other than load
balancing. T320
specifies the time
period during which
the dedicated
priorities (used for
cell reselection) are
valid. After T320
expires, the
dedicated priorities
become invalid. NO NO NO None
This parameter is
invalid for UEs to
be redirected based
on the subscriber
profile ID (SPID).
This timer is started
when the UE
receives an
RRCConnectionRel
ease message
containing the t320
IE. It is stopped
when the UE enters
the
RRC_CONNECTE
D mode.
Indicates the length
of the UE inactivity
timer for UEs that
are running non-
QCI1 services. If
the eNodeB detects
that a UE has
neither received nor
sent data for a
duration exceeding
the value of this
parameter, the LBFD-002007 /
NO NO NO
eNodeB releases TDLBFD-002007
the RRC
connection for the
UE. If this
parameter is set to
0, the UE inactivity
timer is not used. If
the parameter
setting is changed,
the change applies
to UEs that newly
access the network.
Indicates the timer
used to govern the
period in which the
eNodeB maintains
uplink
synchronization for
a UE. After this
timer expires, the
eNodeB does not
send Timing
Advance Command
LBFD-002007 /
to the UE. This NO NO NO
TDLBFD-002007
parameter does not
take effect if it is set
to 0. That is, the
eNodeB will
constantly send
Timing Advance
Command to the
UE to maintain
uplink
synchronization for
the UE.

Indicates the length

of the timer for the
eNodeB to filter
repeated RRC
Connection
LBFD-002007 /
Request messages. NO NO NO
TDLBFD-002007
The actually used
timer length is the
sum of T300 length
and the value of
this parameter.
timer for DRX UEs
when dynamic DRX
is enabled. If the
eNodeB detects
that a UE has
neither received nor
sent data for a
duration exceeding
the value of this
parameter, the
eNodeB releases
the RRC
connection for the
UE. A large value of
this parameter
reduces the amount
of signaling but
increase UE power LOFD-00110501 /
consumption.You TDLOFD-00110501
NO NO NO
are advised to set LOFD-00110502 /
this parameter to a TDLOFD-00110502
value greater than
the value of
UlSynTimerDynDrx.
In power saving
mode, you are
advised to set this
parameter
significantly
different to the
value of the
UlSynTimerDynDrx
parameter, for
example a gap of
10 seconds, to
avoid power
consumption
increase due to the
Indicates the timer
used to govern the
period in which the
eNodeB maintains
uplink
synchronization for
a DRX UE when
dynamic DRX is
enabled. After this
timer expires, the
eNodeB does not
send Timing
Advance Command
to the UE. You are
advised to set this
parameter to a
LOFD-00110501 /
value smaller than
TDLOFD-00110501
the value of NO NO NO
LOFD-00110502 /
UeInactivityTimerDy
TDLOFD-00110502
nDrx.In power
saving mode, you
are advised to set
this parameter
significantly
different to the
value of the
UeInactivityTimerDy
nDrx parameter, for
example a gap of
10 seconds, to
avoid power
consumption
increase due to the
increase of
signaling.
Indicates the length
of the UE inactivity
timer for UEs that
are running
services of QCI 1. If
the eNodeB detects
that a UE has
neither received nor
sent data for a
duration exceeding
the value of this
parameter, the
eNodeB releases
the RRC
connection for the
UE. If this
parameter is set to
0, the UE inactivity
LBFD-002007 /
timer is not used. NO NO NO
TDLBFD-002007
This timer takes
effect during the
setup of bearers
with a QCI of 1.
During a handover
or RRC connection
reestablishment to
a new cell, the
eNodeB determines
whether the timer
takes effect based
on whether the UE
is running services
with a QCI of 1. If
yes, the timer takes
effect; otherwise,
the timer does not
take effect.
Indicates the length
of the UE inactivity
timer for UEs that
enter the DRX state
and perform
services with a QCI
of 1 when dynamic
DRX is enabled. If
the eNodeB detects
that such a UE has
LBFD-
consecutively
NO NO NO 002007/TDLBFD-
neither received or
002007
sent data for a
duration longer than
the timer, the
eNodeB releases
the UE. This
parameter takes
effect only for UEs
that access the
network after the
parameter is set.
Indicates whether
to enable adaptive
configuration of
parameters related
to Radio Link
Control (RLC) on
SRBs. If this
parameter is set to
ON(On), the
eNodeB adaptively
adjusts the SRB
polling PDU
retransmission
timer for the
eNodeB based on LBFD-002008 /
NO NO NO
the timer expiration TDLBFD-002008
information and the
number of
scheduled UEs in
the uplink. This
aims to match the
timer length and the
interval at which
UEs send the
status reports and
reduces the number
of invalid
retransmissions due
to the timer
expiration.

Indicates the
adjustment step of
the SRB polling
PDU retransmission
timer for the
LBFD-002008 /
eNodeB. This NO NO NO
TDLBFD-002008
parameter takes
effect when the
SrbRlcParaAdaptS
witch parameter is
set to ON(On).
Indicates the
maximum
adjustment step of
the SRB polling
PDU retransmission
timer for the LBFD-002008 /
NO NO NO
eNodeB. This TDLBFD-002008
parameter takes
effect when the
SrbRlcParaAdaptS
witch parameter is
set to ON(On).
Indicates the UE
number threshold
for triggering the
SRB RLC
parameter
adaptation. If the
SrbRlcParaAdaptS
witch parameter is
set to ON(On) and
the number of UEs
in a cell is greater LBFD-002008 /
NO NO NO
than the TDLBFD-002008
SrbPollTimerAdjUse
rNumThd
parameter value,
the adaptive
adjustment of the
SRB polling PDU
retransmission
timer for the
eNodeB is
triggered.

Indicates the ID of
YES YES NO None
the TCE for MDT.

Indicates the IP
address version.
IPv4~0 indicates
that the IP version NO NO NO None
is IPv4. IPv6~1
indicates that the IP
version is IPv6.
Indicates the IPv4
NO NO NO None
address of the TCE.

Indicates the IPv6

NO NO NO None
address of the TCE.

Indicates whether
to enable ARP- and
QCI-based user-
differentiated
scheduling.
If
ArpPrioritySchSwitc
h is set to 1, ARP-
and QCI-based
user-differentiated
scheduling is
enabled and the
UlschPriorityFactor
and
DlschPriorityFactor
NO NO NO None
parameters for
standardized QCIs
do not take effect. If
ArpPrioritySchSwitc
h is set to 0, ARP-
and QCI-based
user-differentiated
scheduling is
disabled and the
UlschPriorityFactor
and
DlschPriorityFactor
parameters for
standardized QCIs
take effect.
Indicates the user
NO NO NO None
priority for ARP 1.

Indicates the user

NO NO NO None
priority for ARP 2.

Indicates the user

NO NO NO None
priority for ARP 3.

Indicates the user

NO NO NO None
priority for ARP 4.

Indicates the user

NO NO NO None
priority for ARP 5.

Indicates the user

NO NO NO None
priority for ARP 6.

Indicates the user

NO NO NO None
priority for ARP 7.

Indicates the user

NO NO NO None
priority for ARP 8.

Indicates the user

NO NO NO None
priority for ARP 9.

Indicates the user

NO NO NO None
priority for ARP 10.

Indicates the user

NO NO NO None
priority for ARP 11.

Indicates the user

NO NO NO None
priority for ARP 12.

Indicates the user

NO NO NO None
priority for ARP 13.
Indicates the user
NO NO NO None
priority for ARP 14.

Indicates the user

NO NO NO None
priority for ARP 15.

Indicates the QCI of

an EPS bearer.
Different QCIs
represent different
QoS specifications
such as the packet
delay budget,
packet error loss YES YES NO None
rate, and resource
type (whether the
service is a GBR
service or not). For
details, see Table
6.1.7 in 3GPP TS
23.203.

Indicates the weight

factor used to
calculate the
connection priorities NO NO NO None
during uplink
scheduling for gold
users.

Indicates the weight

factor used to
calculate the
connection priorities NO NO NO None
during downlink
scheduling for gold
users.
Indicates the weight
factor used to
calculate the
connection priorities NO NO NO None
during uplink
scheduling for silver
users.

Indicates the weight

factor used to
calculate the
connection priorities NO NO NO None
during downlink
scheduling for silver
users.

Indicates the weight

factor used to
calculate the
connection priorities NO NO NO None
during uplink
scheduling for
bronze users.

Indicates the weight

factor used to
calculate the
connection priorities NO NO NO None
during downlink
scheduling for
bronze users.
Indicates the mobile
country code (MCC)
LOFD-
of an operator that
YES YES NO 002004/TDLOFD-
the target eNodeB
002004
supporting X2 self-
setup belongs to.

Indicates the mobile

network code
(MNC) of an
operator that the
target eNodeB
supporting X2 self-
LOFD-
setup belongs to.
YES YES NO 002004/TDLOFD-
The value of this
002004
parameter is a
string of two or
three characters,
each of which must
be a digit in the
range of 0 to 9.
Indicates the local
identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

LAOFD-00100101
Indicates the
LAOFD-00100102
Reference Signal
LAOFD-00100201 /
Received Power
TDLAOFD-001002
(RSRP) threshold
LAOFD-00100202 /
for reporting event
TDLAOFD-
A2 in a secondary NO NO NO
00100102
cell. When the
LAOFD-070201 /
RSRP of a UE is
TDLAOFD-070201
lower than this
LAOFD-070202
threshold, event A2
TDLAOFD-
is reported.
00100111
Indicates the LAOFD-00100101
Reference Signal LAOFD-00100102
Received Power LAOFD-00100201 /
(RSRP) threshold TDLAOFD-001002
for a UE to report LAOFD-00100202 /
event A4 of a TDLAOFD-
NO NO NO
secondary cell. 00100102
When the RSRP of LAOFD-070201 /
the UE is greater TDLAOFD-070201
than the threshold, LAOFD-070202
event A4 is TDLAOFD-
reported. 00100111

Indicates whether
to enable carrier
management. If this
parameter is set to
ON(On), the
eNodeB LAOFD-00100101
deactivates the LAOFD-00100102
secondary serving LAOFD-00100201 /
cell (SCell) for a CA TDLAOFD-001002
UE when the traffic LAOFD-00100202 /
volume of the CA TDLAOFD-
NO NO NO
UE is small or the 00100102
channel quality of LAOFD-070201 /
the SCell is poor. If TDLAOFD-070201
this parameter is LAOFD-070202
set to OFF(Off), the TDLAOFD-
SCell is always 00100111
active after being
activated, unless a
radio link failure
(RLF) is detected
on the SCell.
 LAOFD-00100101
LAOFD-00100102
Indicates the
LAOFD-00100201 /
threshold for a CA
TDLAOFD-001002
UE to activate an
LAOFD-00100202 /
SCell. A CA UE can
TDLAOFD-
active an SCell only NO NO NO
00100102
when its buffered
LAOFD-070201 /
data on the eNodeB
TDLAOFD-070201
exceeds this
LAOFD-070202
threshold.
TDLAOFD-
00100111

LAOFD-00100101
Indicates the LAOFD-00100102
threshold for a CA LAOFD-00100201 /
UE to deactivate an TDLAOFD-001002
SCell. A CA UE can LAOFD-00100202 /
deactivate an SCell TDLAOFD-
NO NO NO
only when its 00100102
buffered data on LAOFD-070201 /
the eNodeB is TDLAOFD-070201
smaller than this LAOFD-070202
threshold. TDLAOFD-
00100111
 LAOFD-00100101
LAOFD-00100102
Indicates the
LAOFD-00100201 /
threshold for a CA
TDLAOFD-001002
UE to activate an
LAOFD-00100202 /
SCell. A CA UE can
TDLAOFD-
activate an SCell NO NO NO
00100102
only when its buffer
LAOFD-070201 /
delay on the
TDLAOFD-070201
eNodeB exceeds
LAOFD-070202
this threshold.
TDLAOFD-
00100111

LAOFD-00100101
Indicates the LAOFD-00100102
threshold for a CA LAOFD-00100201 /
UE to deactivate an TDLAOFD-001002
SCell. A CA UE can LAOFD-00100202 /
deactivate an SCell TDLAOFD-
NO NO NO
only when its 00100102
throughput is LAOFD-070201 /
smaller than the TDLAOFD-070201
value of this LAOFD-070202
parameter. TDLAOFD-
00100111
Indicates the offset
for secondary cell
event A6. This TDLAOFD-
offset is the 00100111
difference between TDLAOFD-001002
the quality of a TDLAOFD-
neighboring cell 00100102
and that of the TDLAOFD-070201
NO NO NO
serving cell. A large LAOFD-00100101
value indicates that LAOFD-00100102
a neighboring cell LAOFD-00100201
must have a better LAOFD-00100202
quality than the LAOFD-070201
serving cell for LAOFD-070202
reporting the event
A6.
Indicates the length
of aging time of the
SCells that are
dynamically TDLAOFD-
configured for CA 00100111
UEs in a cell in TDLAOFD-001002
frequency-based TDLAOFD-
CA configuration 00100102
scenarios. If no CA TDLAOFD-070201
NO NO NO
UE is performing LAOFD-00100101
carrier aggregation LAOFD-00100102
between an SCell LAOFD-00100201
and the PCell within LAOFD-00100202
the aging time, the LAOFD-070201
eNodeB cancels LAOFD-070202
the association
between the SCell
and the PCell.
 TDLAOFD-
00100111
Indicates the TDLAOFD-001002
number of periodic TDLAOFD-
measurement 00100102
reports sent after TDLAOFD-070201
NO NO NO
CA event A6 is LAOFD-00100101
triggered. For LAOFD-00100102
details, see 3GPP LAOFD-00100201
TS 36.331. LAOFD-00100202
LAOFD-070201
LAOFD-070202
 TDLAOFD-
00100111
Indicates the
TDLAOFD-001002
interval between
TDLAOFD-
periodic
00100102
measurement
TDLAOFD-070201
reports that are NO NO NO
LAOFD-00100101
sent after CA event
LAOFD-00100102
A6 is triggered. For
LAOFD-00100201
details, see 3GPP
LAOFD-00100202
TS 36.331.
LAOFD-070201
LAOFD-070202
Indicates the
corresponding CQI
threshold of
Release 8 for
deactivating an
SCell based on the
channel quality.
When the channel
quality for a CA UE
is worse than that
indicated by this
threshold in single-
codeword LAOFD-00100101
transmission, the LAOFD-00100102
eNodeB LAOFD-00100201
deactivates the LAOFD-00100202
SCell for the CA LAOFD-070201
UE. If this LAOFD-070202
NO NO NO
parameter is set to TDLAOFD-
0, the eNodeB does 00100111
not deactivate the TDLAOFD-001002
SCell for a CA UE TDLAOFD-
based on channel 00100102
quality of the SCell. TDLAOFD-070201
This parameter
specifies the CQI
threshold for
deactivating the
SCell that the local
cell acts as, and
takes effect only
when the
CarrierMgtSwitch
parameter on the
associated PCell is
set to ON.
Indicates the
minimum interval at
which the eNodeB
attempts to
configure a
secondary serving
cell (SCell) again
for a CA UE whose
LAOFD-00100101
SCell failed to be
LAOFD-00100102
configured. The
LAOFD-00100201
actual interval at
LAOFD-00100102
which the eNodeB
LAOFD-070201
attempts to
LAOFD-070202
configure a NO NO NO
TDLAOFD-
secondary serving
00100111
cell (SCell) again
TDLAOFD-001002
for a CA UE must
TDLAOFD-
be larger than this
00100102
value. The eNodeB
TDLAOFD-070201
makes the attempt
only if the traffic
volume of the UE
always meets the
SCell activation
condition
throughout a certain
time.
component carriers
in the downlink.
This type of
aggregation works
if this option is
selected and at
least three
SccFreqCfg MOs or
four CaGroupCell
MOs are
configured.
InterFddTddCaSwit
ch(InterFddTddCaS
witch): Indicates
whether to enable
aggregation of TDD
and FDD
component carriers.
MRFD-101231
This type of
NO NO NO MRFD-101222
aggregation works
LAOFD-110201
if this option is
selected. In a
combination of FDD
and TDD cells for
CA, either an FDD
cell or a TDD cell
can act as the
PCell.
Tdd2CCDlCaEnhan
ceSwitch(Tdd2CCD
lCaEnhanceSwitch)
: Indicates whether
to enable enhanced
DL ACK
demodulation when
two TDD
component carriers
are aggregated.
Indicates the time-
to-trigger for
activating an SCell
for a UE in the
uplink. If the uplink
traffic volume of a
CA UE is greater
than the
ActiveBufferLenThd
parameter value NO NO NO LAOFD-080202
throughout the
period specified by
the
UlCaActiveTimeToT
rigger parameter,
the eNodeB
initiates the SCell
activation
procedure.
Indicates the
aggregate
LAOFD-00100101
maximum bit rate
LAOFD-00100102
(AMBR) threshold
LAOFD-00100201
for aggregating
LAOFD-00100102
carriers for UEs.
LAOFD-070201
Carriers can only be
LAOFD-070202
aggregated for UEs
LAOFD-080201
whose AMBR NO NO NO
LAOFD-080202
values are greater
LAOFD-080207
than the threshold.
LAOFD-080208
A larger value of
TDLAOFD-
this parameter
00100111
leads to fewer UEs
TDLAOFD-001002
for whom the
TDLAOFD-070201
carriers can be
aggregated.
This reserved
parameter specifies
the sampling period
of the radio TDLAOFD-
resource 00100111
measurement on TDLAOFD-001002
the SCell by the CA TDLAOFD-
UE when the SCell 00100102
is deactivated. If the TDLAOFD-070201
NO NO NO
sampling period is LAOFD-00100101
not configured, the LAOFD-00100102
measurement LAOFD-00100201
configuration LAOFD-00100202
message that the LAOFD-070201
eNodeB sends to LAOFD-070202
the CA UE does not
contain the IE
measCycleSCell.
Indicates the
maximum number
of CA UEs that are
allowed to use the
cell's carrier as the
PCC. If the number
of CA UEs using
the cell's carrier as
the PCC has
reached the
parameter value, no
more CA UEs can LAOFD-00100101
use the carrier as LAOFD-00100102
the PCC. A smaller LAOFD-00100201
parameter value LAOFD-00100202
leads to fewer CA LAOFD-070201
UEs that are LAOFD-070202
allowed to use the LAOFD-080201
NO NO NO
cell's carrier as the LAOFD-080202
PCC. If this LAOFD-080207
parameter is set to LAOFD-080208
0, no CA UE is TDLAOFD-
allowed to use the 00100111
cell's carrier as the TDLAOFD-001002
PCC but CA UEs TDLAOFD-070201
can use the carrier
as the SCC. If the
total value of this
parameter for all
cells on a baseband
processing unit
exceeds the upper
limit of such UEs
served by the unit,
the limit takes
effect.
Indicates the
threshold used to LAOFD-00100101
determine the PCell LAOFD-00100102
high load state for LAOFD-00100201 /
cells. This threshold TDLAOFD-
is used for load- 00100201
based PCC LAOFD-00100202 /
anchoring and is TDLAOFD-
expressed as a 00100102
percentage of UEs LAOFD-070201 /
NO NO NO
that treat the cell as TDLAOFD-070201
their PCell. If the LAOFD-070202
percentage TDLAOFD-
exceeds the 00100111
threshold, the cell is LAOFD-080202
in the PCell high LAOFD-080201
load state. LAOFD-080207
Otherwise, the cell LAOFD-080208
is in the PCell low LAOFD-110201
load state.
 LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-
Indicates the RSRP 00100201
threshold for event LAOFD-00100202 /
A1 used in TDLAOFD-
enhanced PCC 00100102
anchoring. If the LAOFD-070201 /
NO NO NO
measured RSRP TDLAOFD-070201
value exceeds this LAOFD-070202
threshold, an A1 TDLAOFD-
measurement 00100111
report will be sent. LAOFD-080202
LAOFD-080201
LAOFD-080207
LAOFD-080208
LAOFD-110201
perform additional
measurements to
provide more
samples for
collecting statistics.
During automatic
grouping for carrier
aggregation, if the
number of collected
samples is
insufficient, the
eNodeB instructs
UEs to perform
additional
LAOFD-00100101
measurements so
LAOFD-00100102
that the number of
LAOFD-00100201
samples may reach
LAOFD-00100202 /
the preset quantity
TDLAOFD-
threshold.
NO NO NO 00100102
If this parameter is
LAOFD-070201 /
set to
TDLAOFD-070201
ALLOWED(Allowed
LAOFD-070202
), the eNodeB
TDLAOFD-
instructs UEs to
00100111
perform additional
measurements in
an extension period
that automatically
starts when the
number of samples
in a measurement
period does not
reach the preset
target. If this
parameter is set to
NOT_ALLOWED(N
ot Allowed), the
eNodeB does not
Indicates the
minimum required
number of A4 and
A5 report samples
for starting
coverage
evaluation during
automatic grouping
for carrier
aggregation. The
eNodeB starts
coverage
evaluation only if
the number of
NO NO NO LOFD-110219
samples reaches or
exceeds the value
of this parameter.
Based on the
samples, the
eNodeB will
calculate the
coverage overlap
proportion and
adds, changes, or
clears blind SCell
configuration flag
settings for
neighboring cells.

Indicates the
working mode of
automatic grouping
for carrier
aggregation.
If this parameter is
set to FREE, the
eNodeB
automatically adds,
changes, or clears
blind SCell
configuration flag
NO NO NO LOFD-110219
settings for
neighboring cells. If
this parameter is
set to
CONTROLLED, the
eNodeB reports the
optimization advice
on the flag settings
to the U2000, and
operators
determine whether
to take the advice.
Indicates the sleep
period during which
automatic grouping
LAOFD-00100101
for carrier
LAOFD-00100102
aggregation stops
LAOFD-00100201
working. The period
LAOFD-00100202 /
starts when a round
TDLAOFD-
of measurements or
NO NO NO 00100102
configuration is
LAOFD-070201 /
complete. The
TDLAOFD-070201
function resumes
LAOFD-070202
after the sleep
TDLAOFD-
period if the
00100111
network topology
changes during the
sleep period.
aggregation. If the
number of samples
collected in a period
meets the
requirement, the
eNodeB calculates
the coverage
overlap proportion
and adds, changes,
or clears blind SCell
configuration flag
settings for
neighboring cells
within the period. If
the number of
samples collected
in the period does
not meet the
requirement, the NO NO NO LOFD-110219
eNodeB
automatically
extends a second
period and
performs
accumulated
statistics collection.
To ensure the
operating efficiency
of the algorithm, the
eNodeB extends
only one period for
sample collection.
A shorter
measurement
period results in
faster addition,
changes, or
Indicates the
corresponding CQI
threshold of
Release 8 used to
evaluate SCell
deactivation based
on channel quality
LAOFD-00100101
during relaxed-
LAOFD-00100102
backhaul-based
LAOFD-00100201 /
CA. When the
TDLAOFD-001002
channel quality for
LAOFD-00100202 /
a CA UE is worse
TDLAOFD-
than that indicated NO NO NO
00100102
by this threshold in
LAOFD-070201 /
single-codeword
TDLAOFD-070201
transmission, the
LAOFD-070202
eNodeB
TDLAOFD-
deactivates an
00100111
SCell for the UE. If
this parameter is
set to 0, the
eNodeB does not
deactivate SCells
based on channel
quality.

Indicates the
maximum number
of carriers that can
NO NO NO LAOFD-080202
be aggregated in
relaxed backhaul
scenarios.
Indicates the
maximum number
of carriers that can
be aggregated in
the distributed NO NO NO LAOFD-070202
Cloud BB
architecture. This
parameter applies
only to LTE FDD.
 LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-001002
LAOFD-00100202 /
Indicates the time-
TDLAOFD-
to-trigger for CA NO NO NO
00100102
event A2.
LAOFD-070201 /
TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111

LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-001002
LAOFD-00100202 /
Indicates the time-
TDLAOFD-
to-trigger for CA NO NO NO
00100102
event A6.
LAOFD-070201 /
TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111
 LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-001002
LAOFD-00100202 /
Indicates the time-
TDLAOFD-
to-trigger for CA NO NO NO
00100102
event A1.
LAOFD-070201 /
TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111

LAOFD-00100101
Indicates the time-
LAOFD-00100102
to-trigger for CA
LAOFD-00100201 /
event A4. If the
TDLAOFD-001002
measurement result
LAOFD-00100202 /
meets the entering
TDLAOFD-
condition of event NO NO NO
00100102
A4 throughout the
LAOFD-070201 /
time specified by
TDLAOFD-070201
this parameter, the
LAOFD-070202
UE reports CA
TDLAOFD-
event A4.
00100111
periodically do not
receive signals of
the SCell but detect
signals of another
RAT in CA
scenarios. This
causes an increase
in the number of
residual erroneous
blocks in the SCell,
LAOFD-0010010
triggering SCell
LAOFD-00100102
deactivation. This
LAOFD-00100201 /
parameter is added
TDLAOFD-
to ensure that the
00100201
SCell is not
LAOFD-00100202 /
deactivated when
TDLAOFD-
such UEs are
00100102
detecting signals of
LAOFD-070201 /
another RAT in CA NO NO NO
TDLAOFD-070201
scenarios.
LAOFD-070202
The parameter
TDLAOFD-
value must be
00100111
greater than the
LAOFD-080202
duration for such
LAOFD-080201
UEs to detect
LAOFD-080207
signals of another
LAOFD-080208
RAT. If this
LAOFD-090201
parameter is set to
0, the eNodeB
triggers SCell
deactivation once
the eNodeB detects
a residual
erroneous block. If
this parameter is
set to a value
greater than 0, the
Indicates the
maximum number
of carriers that can
be aggregated in MRFD-101222
NO NO NO
the downlink for MRFD-101231
FDD+TDD CA in
relaxed backhaul
scenarios.

Indicates the
maximum number
of FDD and TDD
component carriers
that can be
MRFD-101222
aggregated in the NO NO NO
MRFD-101231
downlink. If this
parameter is set to
2CC(2CC), the
maximum number
is two.
Indicates whether
to prioritize an FDD
and TDD CC in
PCC anchoring for
FDD+TDD 2CC CA.
For FDD+TDD 2CC
CA, if a TDD CC
serves as the PCC
for a UE, the UE
can obtain the
gains brought by
downlink
MRFD-101222
beamforming, NO NO NO
MRFD-101231
increasing downlink
UE throughput.
Therefore, it is
recommended that
this parameter be
set to TDD(TDD). If
this parameter is
set to NULL(NULL),
FDD and TDD CCs
are not prioritized in
PCC anchoring in
FDD+TDD 2CC CA.

Indicates whether
to prioritize an FDD
or TDD CC in PCC
anchoring for
FDD+TDD multi-CC
CA. For FDD+TDD
multi-CC CA, if a
TDD CC serves as
the PCC for a UE,
acknowledgement
bits for downlink
data are limited,
decreasing MRFD-101222
NO NO NO
downlink MRFD-101231
throughput.
Therefore, it is
recommended that
this parameter be
set to FDD(FDD). If
this parameter is
set to NULL(NULL),
FDD and TDD CCs
are not prioritized in
PCC anchoring in
FDD+TDD multi-CC
CA.
Indicates the local
cell ID. It uniquely
YES YES NO None
identifies a cell
within an eNodeB.
values are
described as
follows:
NO_ADAPTIVE: A
fixed beamforming
or MIMO
transmission mode
is
used. That is,
transition between
the beamforming
and MIMO
transmission
mode is not
TDLOFD-001001
supported.
TDLOFD-001003
TxD_BF_ADAPTIV
TDLOFD-001060
E: The transmission
TDLOFD-001049
mode
TDLOFD-001061
changes adaptively
NO NO NO TDLAOFD-
between TM2 and
08140114
TM7 or between
TDLAOFD-
TM2 and TM8,
00100115
depending
TDLAOFD-081409
on the protocol
TDLAOFD-081410
release with which
UEs comply.
MIMO_BF_ADAPTI
VE:
The transmission
mode changes
adaptively between
TM2, TM3, and
TM7,
between TM2, TM3,
and TM8, or
between TM2, TM3,
TM8, and TM9,
depending
beamforming or
MIMO transmission
mode configured for
a multi-antenna
eNodeB. This
parameter is valid
only when
BfMimoAdaptiveSwi
tch is set to
NO_ADAPTIVE.
The values are
described as
follows:
TM2: Transmission TDLOFD-001001
mode 2 is always TDLOFD-001003
used for UEs. TDLOFD-001060
TM3: Transmission TDLOFD-001049
mode 3 is always TDLOFD-001061
used for UEs. NO NO NO TDLAOFD-
TM7: Transmission 08140114
mode 7 is always TDLAOFD-
used for UEs. 00100115
TM8: Transmission TDLAOFD-081409
mode 8 is always TDLAOFD-081410
used for UEs.
TM4: Transmission
mode 4 is always
used for UEs.
TM9 w/o PMI:
Transmission mode
9 without PMI
reporting is always
used for UEs.
TM9 w PMI:
Transmission mode
9 with PMI reporting
is always used for
MIMO_BF_ADAPTI
VE. If this
parameter is set to
ON and the
BfMIMO adaptive
switch parameter is
set to
MIMO_BF_ADAPTI
VE, TM3 is initially
used for handovers,
and then handover
modes are
adaptively selected
between TM3 and
TM7, TM3 and
TM8, or TM3, TM8,
and TM9 based on
the protocols that TDLOFD-001001
UEs comply with. If TDLOFD-001060
NO NO NO
TM9 needs to be TDLOFD-001049
adaptively selected, TDLOFD-001061
the TM9Switch
check box must be
selected. If this
parameter is set to
OFF and the
BfMIMO adaptive
switch parameter is
set to
MIMO_BF_ADAPTI
VE, TM2 is initially
used for handovers,
and then handover
modes are
adaptively selected
between TM2, TM3,
and TM7, TM2,
TM3, and TM8, or
Indicates the offset
of the threshold that
triggers the
transmission mode
switching from
single-stream
TDLOFD-
beamforming mode
NO NO NO 001049/TDLOFD-
to
001061
dual-stream
beamforming mode.
This parameter
applies only to LTE
TDD
cells.
Indicates the offset
of the threshold that
triggers the
transmission mode
switching from TM3 TDLOFD-001001
dual-stream mode NO NO NO TDLOFD-001060
to dual-stream TDLOFD-001061
beamforming mode.
This parameter
applies only to LTE
TDD networks.
Indicates the offset
of the threshold
against which the
transmission mode
of an antenna
selection-enabled
UE switches from
NO NO NO None
dual-stream
beamforming mode
to TM3 dual-stream
mode. This
parameter
applies only to LTE
TDD cells.
Indicates the offset
of the threshold
against which the
transmission mode
of an antenna
selection-enabled
TDLOFD-001001
UE switches from
NO NO NO TDLOFD-001060
TM3 dual-stream
TDLOFD-001061
mode to dual-
stream
beamforming mode.
This parameter
applies only to LTE
TDD cells.
Indicates the offset
of the threshold
against which the
transmission mode
of an antenna
selection-enabled
UE switches from TDLOFD-001001
single-stream NO NO NO TDLOFD-001060
beamforming mode TDLOFD-001061
to dual-stream
beamforming mode.
This
parameter applies
only to LTE TDD
cells.
Indicates the offset
of the threshold that
triggers the
transmission mode
switching from dual-
stream
NO NO NO None
beamforming mode
to TM3
dual-stream mode.
This parameter
applies only to LTE
TDD cells.
Indicates whether
the measured
weight has a gain.
When the
difference between
the measured
weight and the
TDLOFD-001049
instantaneous NO NO NO
TDLOFD-001061
weight
is greater than the
offset, the
measured weight is
used as the
beamforming
weight.
Indicates whether
the instantaneous
weight has a gain.
When
the difference
between the
instantaneous TDLOFD-001049
NO NO NO
weight and the TDLOFD-001061
measured weight
is smaller than the
offset, the
instantaneous
weight is used for
beamforming.
Indicates the
antenna type used
for adaptive
selection of
transmission modes
between
beamforming and
MIMO. This
parameter applies
only to LTE TDD
networks.
If this parameter is
set to 0, 8T8R TDLOFD-001001
cross polarization NO NO NO TDLOFD-001060
antennas are used. TDLOFD-001061
If this parameter is
set to 1, 8T8R
omnidirectional
circular antennas
are used.
If this parameter is
set to 2, other types
of antennas are
used.
Set this parameter
based on the type
of antenna in use.

Indicates whether
to enable
transmission mode
switching from TM3
directly to dual-
stream
beamforming when
adaptation between
MIMO and
beamforming is
enabled. If this
parameter is set to
ON(On), the
TDLOFD-001001
transmission mode
NO NO NO TDLOFD-001060
can change from
TDLOFD-001061
TM3 directly to
dual-stream
beamforming. If this
parameter is set to
OFF(Off), TM3 must
be changed to
single-stream
beamforming and
then to dual-stream
beamforming when
the dual-stream
beamforming mode
is required.
Indicates whether
to enable adaptive
selection of the
transmission mode
of an SCC for CA
UEs.
If this parameter is
set to ON, the
transmission mode
is selected based
on the beamforming
and MIMO
configurations.
If this parameter is TDLAOFD-
set to OFF, the 00100111
transmission mode TDLAOFD-001002
is fixed to TM3 (in TDLAOFD-
non-multi-RRU cell NO NO NO 00100202
scenarios) or TM1 TDLAOFD-070201
(in single-antenna TDLAOFD-081405
scenarios). TDLAOFD-081406
In multi-RRU cell TDLAOFD-081407
scenarios where all
RRUs of the SCC
work in 1T1R mode,
the transmission
mode can be TM1
or TM2 based on
the number of CRS
ports of the cell. In
other multi-RRU cell
scenarios, the
transmission mode
is configured to
TM3.
low-speed UE
switching between
beamforming mode
and MIMO mode
and
that for triggering
high-speed UE
switching between
beamforming mode
and MIMO mode.
This parameter
takes effect only
when adaptation
between
beamforming and
MIMO is enabled.
This parameter can
TDLOFD-001001
be used for
TDLOFD-001060
optimization NO NO NO
TDLOFD-001049
if low-speed UEs
TDLOFD-001061
cannot select an
optimal
transmission mode
by using
the adaptive
selection function. If
this parameter is
set to 0, the
same threshold for
switching between
beamforming and
MIMO modes is
adopted for low-
speed and high-
speed UEs. This
parameter applies
only
Indicates whether
to accelerate
transmission mode
determination for
UEs. If this
parameter is set to
ON(On) when
adaptation between
TDLOFD-001001
beamforming and
TDLOFD-001060
MIMO is enabled,
TDLOFD-001049
the eNodeB
TDLOFD-001061
adaptively reduces
TDLAOFD-
the time for NO NO NO
08140114
determining the
TDLAOFD-
transmission mode
00100115
of UEs based on
TDLAOFD-081409
the signal quality of
TDLAOFD-081410
these UEs. In this
way, the spectral
efficiency improves
when the network is
overloaded. This
parameter applies
only to LTE TDD
networks.
Indicates whether
TM4 can be
selected during the
adaptation between
beamforming and
MIMO when the
BfMimoAdaptiveSwi
tch parameter is set
to
MIMO_BF_ADAPTI
VE(MIMO_BF_ADA
PTIVE). If this
parameter is set to
ON(On), TM4 can TDLOFD-001060
be selected during NO NO NO TDLOFD-001049
the adaptation TDLOFD-001061
between
beamforming and
MIMO. If this
parameter is set to
OFF(Off), TM4
cannot be selected
during the
adaptation between
beamforming and
MIMO. This
parameter applies
only to LTE TDD
networks.

Indicate the offset

of the threshold that
triggers the
transmission mode
switching between
TDLOFD-001001
TM9 with PMI and
TDLAOFD-
TM3 when NO NO NO
00100114
adaptation between
TDLAOFD-081409
TM3, TM8, and
TM9 is enabled in a
cell. This parameter
applies only to LTE
TDD networks.
Indicates the offset
of the threshold that
triggers UE pairing
in dual-stream
MUBF mode for
beamforming UEs.
In omnidirectional
antenna-based or
directional antenna-
based MUBF
pairing scenarios,
TDLOFD-110221
you are advised to NO NO NO
TDLOFD-001077
set this parameter
to the
recommended
value. A value that
is close to the
recommended
value is also
applicable. This
parameter applies
only to LTE TDD
networks.
Indicates the offset
of the threshold that
triggers UE pairing
in four-stream
MUBF mode for
beamforming UEs.
In omnidirectional
antenna-based or
directional antenna-
based high-order
MUBF pairing
scenarios, you are NO NO NO TDLOFD-110221
advised to set this
parameter to the
recommended
value. A value that
is close to the
recommended
value is also
applicable. This
parameter applies
only to LTE TDD
networks.
Indicates the
threshold offset
used for switching
from TM3 dual-
stream mode to
TM9 quadruple-
stream mode. This
parameter controls
TDLOFD-001001
the probability of NO NO NO
TDLAOFD-081409
switching the UE
transmission mode
from TM3 dual-
stream mode to
TM9 quadruple-
stream mode. It
only applies to LTE
TDD networks.
Indicates the
threshold offset
used for switching
from TM9
quadruple-stream
mode to TM3 dual-
stream mode. This
parameter controls
TDLOFD-001001
the probability of NO NO NO
TDLAOFD-081409
switching the UE
transmission mode
from TM9
quadruple-stream
mode to TM3 dual-
stream mode. It
only applies to LTE
TDD networks.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates whether
to enable CQI
reporting period
adaptation. If this
parameter is set to
ON(On), the CQI
reporting period
LBFD-002025
adaptively changes
LOFD-00101502
based on the air NO NO NO
TDLOFD-001049
interface load of the
TDLOFD-001061
cell. If this
parameter is set to
OFF(Off), the CQI
reporting period is
specified by the
UserCqiPeriod
parameter.

Indicates the fixed

CQI reporting
period. This
parameter takes
effect only if the
CqiPeriodAdaptive
LBFD-002025 /
parameter is set to
TDLBFD-002025
OFF(Off). If the NO NO NO
LOFD-00101502 /
UserCqiPeriod
TDLOFD-00101502
parameter is set to
ms2(2ms), the
period is
automatically
changed to 5ms for
the TDD cell.
Indicates whether
CQI and
ACK/NACK can be
simultaneously sent
on the PUCCH. For
details, see the
contents related to
PUCCH formats in
3GPP TS 36.213. If
this parameter is
set to OFF, the
value of LBFD-001006 /
simultaneousAckNa TDLBFD-001006
ckAndCQI becomes LOFD-00101501 /
False, that is, CQI NO NO NO TDLOFD-00101501
and ACK/NACK TDLOFD-001015
cannot be LBFD-002003 /
simultaneously sent TDLBFD-002003
on the PUCCH.
When this
parameter is set to
ON, the value of
simultaneousAckNa
ckAndCQI becomes
True, that is, CQI
and ACK/NACK can
be simultaneously
sent on the
PUCCH.
Indicates the
aperiodic CQI
resource
configurations and
the triggering
condition of
aperiodic CQI
reporting during
handovers. If this
parameter is set to
ON(On), aperiodic
CQI resource
configurations are
included in
handover
commands. When
LBFD-002025 /
no periodic CQI
TDLBFD-002025
resources are NO NO NO
LOFD-00101502 /
configured for a UE,
TDLOFD-00101502
an aperiodic CQI
reporting is
triggered when the
handed-over UE
receives data. If this
parameter is set to
OFF(Off), aperiodic
CQI resource
configurations are
not included in
handover
commands. The
aperiodic CQI
resource is
configured after the
UE is handed over.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the offset
for reporting the DL
CoMP
measurement
event. This offset is
the difference
between the signal
quality of a TDLOFD-001136
neighboring cell TDLAOFD-
NO NO NO
and that of the 00100103
serving cell. A larger TDLAOFD-003002
value indicates that
a neighboring cell
must have better
quality for reporting
the event. For
details, see 3GPP
TS 36.331.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the switch

for adjusting the PA
through power
control on the
PDSCH. If this
parameter is set to LBFD-002016 /
NO NO NO
ON, the PA is TDLBFD-002016
adjusted
dynamically when
the channel quality
is extremely good
or bad.
Indicates the PA to
be used when PA
adjustment for
PDSCH power
LBFD-002016 /
control is disabled, NO NO NO
TDLBFD-002016
DL ICIC is disabled,
and the even power
distribution is used
for the PDSCH.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
operates in FDD
mode. This
threshold is used in
the DRX algorithm.
It is expressed as a
proportion of the
transmission time
intervals (TTIs) with
data transmission
to the total TTIs. If
the measurement
result of UE traffic is
equal to or lower
than this threshold,
the eNodeB
determines that the
UE should remain
in DRX mode or the
UE should be LBFD-002017 /
NO NO NO
triggered to enter TDLBFD-002017
DRX mode. If both
the values of the
FddExitDrxThd and
FddEnterDrxThd
parameters are
small and close to
each other, the UE
frequently enters
and exits the DRX
mode. When both
the
FddEnterDrxThd
parameter and the
FddExitDrxThd
parameter are set
to 1000 and DRX is
enabled, the
eNodeB directly
intervals (TTIs) with
data transmission
to the total TTIs. If
the measurement
result of UE traffic is
higher than this
threshold, the
eNodeB determines
that the UE should
remain in the non-
DRX mode or the
UE should be
triggered to exit the
DRX mode. If the
value of the
FddExitDrxThd
parameter is set to
1000 and the value
LBFD-002017 /
of the NO NO NO
TDLBFD-002017
FddEnterDrxThd
parameter is set to
a value smaller
than 1000, the UE
will not exit the DRX
mode once entering
the DRX mode. If
both the values of
the FddExitDrxThd
and
FddEnterDrxThd
parameters are
small and close to
each other, the UE
frequently enters
and exits the DRX
mode. When both
the
Indicates the uplink
traffic volume
threshold for UEs to
enter DRX mode in
a cell that operates
in LTE TDD mode.
This threshold is
used in the DRX
algorithm. It is
expressed as a
proportion of the
TTIs with uplink
data transmission NO NO NO TDLBFD-002017
to the total TTIs. If
the traffic volume of
a UE is less than or
equal to this
threshold, the
eNodeB determines
that the UE should
retain its DRX state
or enter DRX mode.
This parameter
applies only to LTE
TDD cells.

Indicates the uplink

traffic volume
threshold for UEs to
exit DRX mode in a
cell that operates in
LTE TDD mode.
This threshold is
used in the DRX
algorithm. It is
expressed as a
proportion of the
TTIs with uplink
data transmission
NO NO NO TDLBFD-002017
to the total TTIs. If
the traffic volume of
a UE is greater than
or equal to this
threshold, the
eNodeB decides
that the UE should
retain its non-DRX
state or exit DRX
mode. This
parameter applies
only to LTE TDD
cells.
Indicates the
downlink traffic
volume threshold
for UEs to enter
DRX mode in a cell
that operates in LTE
TDD mode. This
threshold is used in
the DRX algorithm.
It is expressed as a
proportion of the
TTIs with downlink
data transmission NO NO NO TDLBFD-002017
to the total TTIs. If
the traffic volume of
a UE is less than or
equal to this
threshold, the
eNodeB determines
that the UE should
retain its DRX state
or enter DRX mode.
This parameter
applies only to LTE
TDD cells.

Indicates the
downlink traffic
volume threshold
for UEs to exit DRX
mode in a cell that
operates in LTE
TDD mode. This
threshold is used in
the DRX algorithm.
It is expressed as a
proportion of the
TTIs with downlink
data transmission
NO NO NO TDLBFD-002017
to the total TTIs. If
the traffic volume of
a UE is greater than
or equal to this
threshold, the
eNodeB decides
that the UE should
retain its non-DRX
state or exit DRX
mode. This
parameter applies
only to LTE TDD
cells.
Indicates the length
of the UE traffic
measurement
period. The traffic
volume of a UE
during this period is
measured. Based LBFD-002017 /
NO NO NO
on the TDLBFD-002017
measurement
result, the DRX
algorithm decides
whether the UE
should enter or exit
DRX.

Indicates whether
DRX active-time
measurement is
supported in a cell
that operates in LTE
TDD mode. If this
parameter is set to
ON(On), the
eNodeB supports
DRX active-time NO NO NO None
measurement. If
this parameter is
set to OFF(Off), the
eNodeB does not
support DRX active-
time measurement.
This parameter
applies only to LTE
TDD cells.

Indicates the
duration of the UE
active-time
measurement
period for a cell that
operates in LTE
TDD mode. The
eNodeB uses the
measurement result
NO NO NO None
in the DRX
algorithm to
determine whether
the UE
should enter or exit
DRX mode. This
parameter applies
only to LTE
TDD cells.
Indicates the active-
time measurement
threshold for UEs to
enter DRX mode in
a cell that operates
in LTE TDD mode.
This threshold is
used in the DRX
algorithm. If the
measurement result NO NO NO None
of a UE is less than
this threshold, the
eNodeB determines
that the UE should
retain its DRX state
or enter DRX mode.
This parameter
applies only to LTE
TDD cells.

Indicates the active-

time measurement
threshold for UEs to
exit DRX mode in a
cell that operates in
LTE TDD mode.
This threshold is
used in the DRX
algorithm. If the
measurement result
NO NO NO None
of a UE is greater
than this threshold,
the eNodeB
determines that the
UE should retain its
non-DRX state or
exit DRX mode.
This parameter
applies only to LTE
TDD cells.
Indicates the length
of the long DRX
cycle for a UE in
the uplink out-of-
synchronization
state. Set this
parameter to a
value greater than LOFD-001105
NO NO NO
the value of TDLBFD-002017
LongDrxCycle;
otherwise, the
power saving gain
of the DRX for UEs
in the uplink out-of-
synchronization
state decreases.
Indicates whether
the cqi-Mask IE can
be set. The cqi-
Mask IE is an
optional IE
introduced in 3GPP
Release 9. If the
cqi-Mask IE is set to
Setup, the UE can
send
CQI/PMI/RI/PTI
LBFD-002017 /
reports on PUCCH NO NO NO
TDLBFD-002017
only in the
onDuration period
of discontinuous
reception (DRX). If
the cqi-Mask IE is
not set, the UE can
send
CQI/PMI/RI/PTI
reports on PUCCH
in the active period
of DRX.
Indicates the DRX
onduration timer for
LOFD-00110501 /
UEs when the
TDLOFD-00110501
eNodeB does not NO NO NO
LOFD-00110502 /
maintain
TDLOFD-00110502
synchronization for
UEs.
Indicates the DRX
inactivity timer for
UEs when the
LOFD-001105 /
eNodeB does not NO NO NO
TDLOFD-001105
maintain
synchronization for
UEs.
this parameter is
set to DEFAULT,
the eNodeB selects
the group with the
shortest long DRX
cycle and, if an
identical long DRX
cycle length is
mapped to multiple
QCIs, selects the
group mapped to
the highest-ARP
QCI. (The ARP
settings are
delivered from the
EPC.) If this
parameter is set to
QCIPRIORITY, the
LBFD-002017 /
eNodeB selects the NO NO NO
TDLBFD-002017
group mapped to
the highest-priority
QCI and, if no DRX
parameter group is
mapped to the
highest-priority QCI,
does not configure
DRX parameters for
the UE. If this
parameter is set to
3GPPDEFINEDQCI
PRIORITY, the
eNodeB selects the
group with the
shortest long DRX
cycle and, if an
identical long DRX
cycle length is
(SRS) resources, or
periodic channel
quality indicator
(CQI), or neither. If
this parameter is
set to OFF, then
DrxStartOffset
takes the value of
SrsOffset,
CqiOffset, or 0
when a UE is
configured with only
SRS resources, or
periodic CQI, or
neither,
respectively. This
prevents
DrxStartOffset
values from being
NO NO NO LBFD-002017
randomly
distributed within
the range of 0 to
(LongDrxCycle - 1).
If this parameter is
set to ON,
DrxStartOffset
values can be
randomly
distributed within
the range of 0 to
(LongDrxCycle - 1)
for UEs that are
configured with only
SRS resources, or
periodic CQI, or
neither. This
parameter applies
only to LTE FDD
determines whether
to enable the UE to
enter the DRX
sleep time based
on the stop time of
the
DRXInactivityTimer
timer instead of
promptly enabling
the UE to enter the
DRX sleep time. If
the eNodeB detects
the two consecutive
DTXs after the
DRXInactivityTimer
timer stops, the UE
enters the DRX
sleep time. If the
eNodeB detects the NO NO NO LBFD-002017
two consecutive
DTXs before the
DRXInactivityTimer
timer stops, the UE
does not enter the
DRX sleep time.
If this parameter is
set to ON and DRX
is enabled for a UE
in carrier
aggregation (CA)
scenarios, the
eNodeB determines
whether two
consecutive DTXs
occur based on
hybrid automatic
repeat request
Indicates whether
to deliver
measurement-
dedicated DRX
parameters to a UE
when GERAN
measurements are
triggered for CSFB
of the UE. If this
parameter is set to
ON, the eNodeB
delivers both DRX
LOFD-081283 /
parameters and NO NO NO
TDLOFD-081203
gap-assisted
GERAN
measurement
configurations to
the UE. If this
parameter is set to
OFF, the eNodeB
delivers only gap-
assisted GERAN
measurement
configurations to
the UE.
Indicates the length
of the long DRX
LOFD-081283 /
cycle dedicated to NO NO NO
TDLOFD-081203
GERAN
measurement.
Indicates the length
of the On Duration
LOFD-081283 /
Timer dedicated to NO NO NO
TDLOFD-081203
GERAN
measurement.
Indicates the length
of the DRX
Inactivity Timer LOFD-081283 /
NO NO NO
dedicated to TDLOFD-081203
GERAN
measurement.
Indicates the length
of the DRX
Retransmission LOFD-081283 /
NO NO NO
Timer dedicated to TDLOFD-081203
GERAN
measurement.

Indicates whether
to enable the short
DRX cycle LOFD-081283 /
NO NO NO
dedicated to TDLOFD-081203
GERAN
measurement.
Indicates the length
of the short DRX
LOFD-081283 /
cycle dedicated to NO NO NO
TDLOFD-081203
GERAN
measurement.
Indicates the length
of the DRX Short
Cycle Timer LOFD-081283 /
NO NO NO
dedicated to TDLOFD-081203
GERAN
measurement.
Indicates whether
to increase the
probability of falsely
detected SRs when
UEs are in the DRX
state. If this switch
is turned off, there
is a high probability
of falsely detected
SRs when UEs are
in the DRX state. If
this switch is turned
on, there is a low
probability of falsely
detected SRs in the
DRX state, and TDLBFD-002017
UEs enter active NO NO NO TDLOFD-00110501
state only after TDLBFD-070112
falsely detected
SRs are confirmed,
which reduces the
impact of falsely
detected SRs. It is
recommended that
the PuschDtxSwitch
check box under
the UlSchSwitch
parameter is
selected when this
switch is turned on.
This parameter
applies only to LTE
TDD networks.
Indicates whether
to adjust the
DrxStartOffset
value. This
parameter applies
only to LTE TDD
networks. If this
switch is turned on,
DrxStartOffset is
not configured on
the special
subframe to avoid
TDLBFD-002017
the following
NO NO NO TDLOFD-00110501
compatibility issue:
TDLBFD-070112
If the DrxStartOffset
is configured on the
special subframe
for certain UEs and
downlink
scheduling is
performed on the
subframe, these
UEs cannot receive
information
indicating downlink
scheduling.
Indicates whether
to enable special
scheduling for UEs
to which the
eNodeB has
delivered
measurement-
dedicated DRX
parameters. If this
parameter is set to
ON, special
scheduling is
LOFD-001023 /
enabled so that the
TDLOFD-001023
sleep time, during
LOFD-001034 /
which GERAN
TDLOFD-001034
measurements can
LOFD-001053 /
be performed, is
TDLOFD-001053
maximized for UEs NO NO NO
LOFD-081283 /
that are running
TDLOFD-081203
services. As a
LOFD-001020 /
result, the
TDLOFD-001020
measurement
LOFD-001046 /
reporting delay is
TDLOFD-001046
shortened for such
UEs. If this
parameter is set to
OFF, special
scheduling is
disabled. For UEs
with ongoing
services, the sleep
time is so short that
measurement
reporting is
delayed.
Indicates whether
to deliver
measurement-
dedicated DRX
parameters to a UE
when GERAN
measurements are
triggered for a
coverage-based
handover of the UE.
If this parameter is
set to ON, the
TDLOFD-001023 /
eNodeB delivers
LOFD-001023
both DRX NO NO NO
TDLOFD-001020 /
parameters and
LOFD-001020
gap-assisted
GERAN
measurement
configurations to
the UE. If this
parameter is set to
OFF, the eNodeB
delivers only gap-
assisted GERAN
measurement
configurations to
the UE.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the RSRP
threshold for events
A1/A2 that are used
for coverage based
inter-frequency
blind handover and
coverage based
inter-RAT blind
handover. If the
RSRP
measurement result
LBFD-00201802 /
of the serving cell is
TDLBFD-00201802
higher than the sum
LOFD-001019 /
of this threshold
TDLOFD-001019
and the hysteresis NO NO NO
LOFD-001020 /
throughout the
TDLOFD-001020
time-to-trigger,
LOFD-001021 /
event A1 is
TDLOFD-001021
reported. If the
RSRP
measurement result
of the serving cell is
lower than this
threshold minus the
hysteresis
throughout the
time-to-trigger,
event A2 is
reported.
Indicates the RSRQ
threshold for events
A1/A2 that are used
for coverage based
inter-frequency
blind handover and
coverage based
inter-RAT blind
handover. If the
RSRQ
measurement result
LBFD-00201802 /
of the serving cell is
TDLBFD-00201802
higher than the sum
LOFD-001019 /
of this threshold
TDLOFD-001019
and the hysteresis NO NO NO
LOFD-001020 /
throughout the
TDLOFD-001020
time-to-trigger,
LOFD-001021 /
event A1 is
TDLOFD-001021
reported. If the
RSRQ
measurement result
of the serving cell is
lower than this
threshold minus the
hysteresis
throughput the
time-to-trigger,
event A2 is
reported.

Indicates the
threshold that
determines whether
a UE moves at a
high or low speed. LOFD-081228
If the UE moves at NO NO NO LBFD-080205 /
a speed lower than TDLOFD-080205
this threshold, the
UE is a low-speed
UE. Otherwise, it is
a high-speed UE.
Indicates the
handover method
switches based on
which the eNodeB
determines
handover policies.
BlindHoSwitch: This
option controls
whether to enable
blind handovers for LOFD-001033 /
CSFB. If both this LOFD-001034 /
NO NO NO
option and the TDLOFD-001033 /
BlindHoSwitch TDLOFD-001034
option of the
Handover Mode
switch parameter of
the
ENodeBAlgoSwitch
MO are selected,
blind CSFB
handovers for
CSFB are enabled.

Indicates the
switches used to
control whether to
enable optimization
algorithms for
SRVCC-based
handovers.
SRVCCWITHPSCS
RETRYSWITCH(Sr
vccWithPsCsRetryS
witch): Assume that
a PS+CS handover
preparation for
SRVCC fails. If this LOFD-001022 /
NO NO NO
option is selected, TDLOFD-001022
the eNodeB
reinitiates a CS
handover
preparation attempt
in the original target
cell. If this option is
deselected, the
eNodeB does not
reinitiate a CS
handover
preparation attempt
in the original target
cell.
Indicates the MCS
index threshold for
triggering uplink-
quality-based
handovers. If the
uplink MCS index
selected for a UE is
less than the
UlBadQualHoMcsT
hd parameter value,
the eNodeB
measures the
uplink IBLER of the
UE. The eNodeB
determines whether
NO NO NO None
to trigger an uplink-
quality-based
handover for a UE
based on the
measurement
result. If the
selected uplink
MCS index is
greater than the
UlBadQualHoMcsT
hd parameter value,
the uplink-quality-
based handover is
terminated for the
UE.
Indicates the IBLER
threshold for
triggering uplink-
quality-based
handovers. If the
uplink IBLER of a
UE minus the target
IBLER is greater
than the
UlBadQualHoIblerT
hd parameter value,
an uplink-quality-
based handover is
triggered for the
UE. If the uplink
IBLER of a UE
minus the target
IBLER and 10% is
NO NO NO None
greater than the
UlBadQualHoIblerT
hd parameter value,
an uplink-quality-
based blind
handover is
triggered for the
UE. If the uplink
IBLER of a UE
minus the target
IBLER is less than
the
UlBadQualHoIblerT
hd parameter value,
the uplink-quality-
based handover is
terminated for the
UE.
to determine
whether a UE in
RRC_CONNECTE
D mode moves at a
high speed. If the
number of
handovers of a UE
in an evaluation
period specified by
SpeedEvaluatedPer
iod is greater than
SpeedEvaluatedNu
m, the eNodeB
determines that the
UE moves at a high
speed and initiates
a measurement-
based redirection to
a high-speed
NO NO NO None
frequency. If the
number of
handovers of the
UE in the period is
greater than or
equal to
SpeedEvaluatedNu
mForFastUe, the
eNodeB determines
that the UE moves
at a fast speed. In
this situation, if the
UE has GBR
bearers, the
eNodeB initiates a
handover for the
UE to a frequency
for which the
SpeedMobilityTarge
Indicates the
number of
handovers used to
determine whether
a UE in RRC-
CONNECTED
mode moves at a
high speed during a
specified period.
This parameter is
one of the key
parameters used
for redirection of
high-speed UEs,
which are
determined based
on the number of
handovers in a
specified period. If NO NO NO None
the number of
handovers of a UE
is greater than the
value of this
parameter during
the period specified
by the
SpeedEvaluatedPer
iod parameter, the
UE is identified as a
high-speed UE and
triggers a
redirection to a
high-speed
frequency. This
parameter applies
only to LTE TDD
cells.
Indicates how
measurement
reports are handled
in measurement-
based
CSFB to UTRAN. If
this parameter is
set to
HANDOVER_IMME
DIATELY, an
eNodeB
immediately
performs handover
evaluation after
receiving a
measurement
report for CSFB to LOFD-001033 /
NO NO NO
UTRAN. If this TDLOFD-001033
parameter is set to
BASED_ON_SIGN
AL_STRENGTH,
the eNodeB
transfers the UE to
the strongest
cell. If this
parameter is set to
BASED_ON_FREQ
_PRIORITY, the
eNodeB
hands over the UE
to a cell on a
frequency with a
priority as high
as possible.

Indicates the length

of the timer that the
eNodeB waits for
the next
measurement
report after LOFD-001033 /
NO NO NO
receiving the first TDLOFD-001033
measurement
report for
measurement-
based CSFB to
UTRAN.
triggered. If this
option is
deselected, the
eNodeB only
performs an inter-
RAT blind handover
when an
emergency blind
handover is
triggered.
InterFreqSpeedHoS
witch: If this option
is selected, speed-
based inter-
frequency
handovers are
enabled. This
algorithm allows
LBFD-00201802 /
UEs that are NO NO NO
TDLBFD-00201802
running GBR
services and move
at a high speed to
be handed over to
operator-specific
neighboring
frequencies with
better coverage. In
addition, the
eNodeB does not
perform load-based
and other
unnecessary
handovers for these
UEs. If this option is
deselected, speed-
based inter-
frequency
Indicates the
number of
handovers used to
determine whether
a UE in
RRC_CONNECTE
D mode moves at a
high speed during a
specified period. If
the number of
handovers of a UE
within the time
specified by the NO NO NO None
SpeedEvaluatedPer
iod parameter is
greater than or
equal to the value
of this parameter,
the eNodeB
identifies the UE as
a high-speed one
and performs a
speed-based inter-
frequency handover
for the UE.

Indicates whether
the source cell
delivers information
of the elapsed time
of the UE inactivity
timer to the target
cell in a handover
and the target cell
inherits the elapsed
time.
If this parameter is
set to ON(On), the
source cell delivers
information of the
elapsed time of the NO NO NO None
UE inactivity timer
to the target cell in
the handover and
the target cell
inherits the elapsed
time.
If this parameter is
set to OFF(Off), the
source cell does not
deliver information
of the messages
and the target cell
does not inherit the
elapsed time.
Indicates the UE
quantity threshold
for triggering blind
redirection in a
high-speed railway
cell when the train
leaves the cell. This
parameter is used
for interference
coordination in
high-speed railway
scenarios. When
the train leaves a
high-speed railway
cell, the eNodeB
blindly redirects all
the remaining UEs TDLOFD-081218 /
NO NO NO
in this cell to a TDLOFD-081218
nearby low-speed
frequency if the
number of the
remaining UEs is
lower than the
threshold specified
by this parameter.
After the redirection
is complete, the cell
sends a request for
entering the
sleeping mode to
the eCoordinator.
This parameter
applies only to LTE
TDD networks.
Indicates the
protection time
before handing out
low-speed UEs that
support handover
enhancement in
high-speed mobility
scenarios. After
low-speed UEs are
handed out from
high-speed or ultra-
high-speed cells,
low-speed UEs are
no longer handed
out before the
LOFD-081228
protection timer NO NO NO
TDLOFD-080205
expires. In this
manner, UEs will
not be handed out
in batches when the
train pulls up.
If a large number of
low-speed UEs get
out of the train and
stay in the high-
speed cell, a
smaller value of this
parameter
increases the
handing out
efficiency.

Indicates the local

cell ID. It uniquely
YES YES NO None
identifies a cell
within an eNodeB.
for a multi-antenna
eNodeB. The
values are
described as
follows:
NO_ADAPTIVE: A
fixed MIMO
transmission mode
is used. That is,
transition between
MIMO transmission
modes is not
supported.
OL_ADAPTIVE:
The open-loop
adaptive MIMO
transmission mode
LOFD-001001
is used. In this
LOFD-001003
mode, UEs report
NO NO NO LOFD-001060 /
RANK and CQI
TDLOFD-001060
values but do not
TDLOFD-001001
report PMI values
to the eNodeB.
CL_ADAPTIVE:
The closed-loop
adaptive MIMO
transmission mode
is used. In this
mode, UEs report
RANK, CQI, and
PMI values to the
eNodeB.
OC_ADAPTIVE:
UEs switch
between the open-
loop and closed-
loop adaptive
MIMO transmission
Indicates the fixed
MIMO transmission
mode configured by
a multi-antenna
eNodeB for UEs.
This parameter is
valid only when
MimoAdaptiveSwitc
h is set to
NO_ADAPTIVE.
There are four
values.
LOFD-001001
TM2: Transmission
LOFD-001003
mode 2 is
NO NO NO LOFD-001060 /
permanently
TDLOFD-001060
applied to UEs.
TDLOFD-001001
TM3: Transmission
mode 3 is
permanently
applied to UEs.
TM4: Transmission
mode 4 is
permanently
applied to UEs.
TM6: Transmission
mode 6 is
permanently
applied to UEs.
If this parameter is
set to TM2(TM2),
the MIMO
transmission mode
used during initial
network access is
TM2.
If this parameter is
set to
ADAPTIVE(ADAPTI
VE), the MIMO
transmission mode
used during initial
network access is
determined by the
settings of the
MimoAdaptiveSwitc
LOFD-001001 /
h and
TDLOFD-001001
FixedMimoMode
NO NO NO LOFD-001003
parameters. If the
LOFD-001060 /
MimoAdaptiveSwitc
TDLOFD-001060
h parameter is set
to NO_ADAPTIVE,
the initial MIMO
transmission mode
is determined by
the setting of the
FixedMimoMode
parameter. If the
MimoAdaptiveSwitc
h parameter is set
to OL_ADAPTIVE
or OC_ADAPTIVE,
the initial MIMO
transmission mode
is TM3. If the
MimoAdaptiveSwitc
h parameter is set
Indicates the local
ID of the cell, which
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the
frequency selection
policy for load pre-
balancing. The
value
RESELBASED
indicates that the
target frequency is
selected based on
cell-reselection
priorities of
NO NO NO TDLOFD-070215
frequencies. The
value
MLBPRIOBASED
indicates that the
target frequency is
selected based on
MLB priorities of
frequencies. This
parameter applies
only to LTE TDD
cells.
Indicates the
protection mode for
TDLOFD-001032
UEs that are NO NO NO
TDLOFD-070215
transferred to a cell
for MLB.
Indicates the length
of duration in which
UEs that are
transferred to a cell
for MLB are not
allowed to be
transferred for MLB
again. If this
parameter is set to TDLOFD-001032
NO NO NO
0, this protection TDLOFD-070215
timer is not used.
This parameter
takes effect only for
UEs that will be
transferred to this
cell for MLB after
the parameter is
set.

Indicates the RSRP

threshold for inter-
frequency MLB-
based hand-in UEs
TDLOFD-001032
to perform NO NO NO
TDLOFD-070215
measurement event
A1. This parameter
is dedicated to LTE
TDD cells.
Indicates the RSRQ
threshold for inter-
frequency MLB-
based hand-in UEs
TDLOFD-001032
to perform NO NO NO
TDLOFD-070215
measurement event
A1. This parameter
is dedicated to LTE
TDD cells.

Indicates the RSRP

threshold for inter-
frequency MLB-
based hand-in UEs
TDLOFD-001032
to perform NO NO NO
TDLOFD-070215
measurement event
A1. This parameter
is dedicated to LTE
TDD cells.
Indicates the RSRQ
threshold for inter-
frequency MLB-
based hand-in UEs
TDLOFD-001032
to perform NO NO NO
TDLOFD-070215
measurement event
A1. This parameter
is dedicated to LTE
TDD cells.

Indicates the
policies used in
inter-RAT MLB.
If the
UtranRedirectIMMC
I option is selected,
the eNodeB
delivers dedicated LOFD-
cell-reselection NO NO NO 001044/TDLOFD-
priorities of 001044
frequencies for
"MLB to UTRAN by
transferring
RRC_REL UEs"
when redirections
for MLB to UTRAN
are triggered.
eNodeB determines
the admission of
UEs that are
transferred to the
serving cell by
unnecessary
handovers (for
example, service-
based inter-
frequency
handovers) based
on whether an MLB
procedure is
triggered in the
serving cell only if
LOFD-001032 /
this option is
TDLOFD-001032
selected.
LOFD-070215 /
X2RoHoAdmitSwitc
TDLOFD-070215
h: Indicates NO NO NO
LBFD-00201804 /
whether UEs are
TDLBFD-00201804
admitted based on
TDLOFD-070228
the MLB triggering
LOFD-080215
status in S1-based
or X2-based
incoming
handovers with the
cause value of
Resource
Optimisation
Handover over the
S1 or X2 interface
are admitted based
on triggering of
MLB. If this option
is selected, the UEs
are admitted based
on the MLB

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the index

YES YES NO None
of the operator.
 LOFD-001033 /
TDLOFD-001033
LOFD-001034 /
TDLOFD-001034
LOFD-001035 /
TDLOFD-001035
LOFD-001019 /
Indicates the
TDLOFD-001019
highest-priority
LOFD-001020 /
target RAT for
TDLOFD-001020
handovers. It is
LOFD-001021 /
UTRAN by default. NO NO NO
TDLOFD-001021
This parameter can
LOFD-001052 /
be set to UTRAN,
TDLOFD-001052
GERAN, or
LOFD-001053 /
CDMA2000.
TDLOFD-001053
LOFD-001090 /
TDLOFD-001090
LOFD-070202 /
TDLOFD-070202
LOFD-081283 /
TDLOFD-081283

Indicates the LOFD-001033 /

medium-priority TDLOFD-001033
target RAT for LOFD-001034 /
handovers. It is TDLOFD-001034
GERAN by default. LOFD-001035 /
If this parameter is TDLOFD-001035
set to UTRAN, LOFD-001019 /
GERAN, or TDLOFD-001019
CDMA2000, the LOFD-001020 /
medium-priority TDLOFD-001020
target RAT is LOFD-001021 /
NO NO NO
UTRAN, GERAN, TDLOFD-001021
or CDMA2000, LOFD-001052 /
respectively. If this TDLOFD-001052
parameter is set to LOFD-001053 /
NULL, no medium- TDLOFD-001053
priority target RAT LOFD-001090 /
is specified and TDLOFD-001090
only the highest- LOFD-070202 /
priority target RAT TDLOFD-070202
can be selected for LOFD-081283 /
handovers. TDLOFD-081283
Indicates the
LOFD-001033 /
lowest-priority
TDLOFD-001033
target RAT for
LOFD-001034 /
handovers. It is
TDLOFD-001034
CDMA2000 by
LOFD-001035 /
default. If this
TDLOFD-001035
parameter is set to
LOFD-001019 /
UTRAN, GERAN,
TDLOFD-001019
or CDMA2000, the
LOFD-001020 /
lowest-priority
TDLOFD-001020
target RAT is
LOFD-001021 /
UTRAN, GERAN, NO NO NO
TDLOFD-001021
or CDMA2000,
LOFD-001052 /
respectively. If this
TDLOFD-001052
parameter is set to
LOFD-001053 /
NULL, no lowest-
TDLOFD-001053
priority target RAT
LOFD-001090 /
is specified and
TDLOFD-001090
only the highest- or
LOFD-070202 /
medium-priority
TDLOFD-070202
target RAT can be
LOFD-081283 /
selected for
TDLOFD-081283
handovers.

LOFD-001033 /
TDLOFD-001033
LOFD-001034 /
Indicates the
TDLOFD-001034
highest-priority
LOFD-001035 /
target RAT for
TDLOFD-001035
CSFB initiated by
LOFD-001052 /
UEs in idle mode. It
TDLOFD-001052
is UTRAN by NO NO NO
LOFD-001053 /
default. This
TDLOFD-001053
parameter can be
LOFD-001090 /
set to UTRAN,
TDLOFD-001090
GERAN, or
LOFD-070202 /
CDMA2000.
TDLOFD-070202
LOFD-081283 /
TDLOFD-081283
Indicates the
medium-priority
target RAT for
CSFB initiated by
UEs in idle mode. It LOFD-001033 /
is GERAN by TDLOFD-001033
default. If this LOFD-001034 /
parameter is set to TDLOFD-001034
UTRAN, GERAN, LOFD-001035 /
or CDMA2000, the TDLOFD-001035
medium-priority LOFD-001052 /
target RAT is TDLOFD-001052
NO NO NO
UTRAN, GERAN, LOFD-001053 /
or CDMA2000, TDLOFD-001053
respectively. If this LOFD-001090 /
parameter is set to TDLOFD-001090
NULL, no medium- LOFD-070202 /
priority target RAT TDLOFD-070202
is specified and LOFD-081283 /
only the highest- TDLOFD-081283
priority target RAT
can be selected for
CSFB initiated by
UEs in idle mode.

Indicates the
lowest-priority
target RAT for
CSFB initiated by
UEs in idle mode. It
LOFD-001033 /
is CDMA2000 by
TDLOFD-001033
default. If this
LOFD-001034 /
parameter is set to
TDLOFD-001034
UTRAN, GERAN,
LOFD-001035 /
or CDMA2000, the
TDLOFD-001035
lowest-priority
LOFD-001052 /
target RAT is
TDLOFD-001052
UTRAN, GERAN, NO NO NO
LOFD-001053 /
or CDMA2000,
TDLOFD-001053
respectively. If this
LOFD-001090 /
parameter is set to
TDLOFD-001090
NULL, no lowest-
LOFD-070202 /
priority target RAT
TDLOFD-070202
is specified and
LOFD-081283 /
only the highest- or
TDLOFD-081283
medium-priority
target RAT can be
selected for CSFB
initiated by UEs in
idle mode.
Indicates the local
ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the ID of
the parameter
YES YES NO None
group related to
preallocations.

Indicates whether
to enable or disable
preallocation for a
bearer with a
specified
preallocation
parameter group
ID. If this parameter
is set to ON(On),
preallocation is
enabled for this
bearer. If this
LOFD-00101502 /
parameter is set to NO NO NO
TDLOFD-00101502
OFF(Off),
preallocation is
disabled for this
bearer. This switch
is a bearer-level
switch and takes
effect when the cell-
level switch
PreAllocationSwitch
in the
CellAlgoSwitch MO
is turned on.
Indicates whether
smart preallocation
is enabled or
disabled for a
bearer with a
specified
preallocation
parameter group ID
when
PreAllocationSwitch
is turned on. If both
PreAllocationSwitch
and
SmartPreAllocation
Switch are turned
on, and
LOFD-00101502 /
SmartPreAllocation NO NO NO
TDLOFD-00101502
Duration is set to a
value greater than
0, uplink smart
preallocation is
enabled; otherwise,
uplink smart
preallocation is
disabled. This
switch is a bearer-
level switch and
takes effect when
the cell-level switch
PreAllocationSwitch
in the
CellAlgoSwitch MO
is turned on.

Indicates the
minimum interval
between two
preallocations, that
is, the interval
between two times
that a UE is
preallocated must
be larger than this
LOFD-00101502 /
parameter value. NO NO NO
TDLOFD-00101502
When the DRX
algorithm switch is
on and the UE is in
DRX mode, the
actual value of this
parameter cannot
be greater than the
DrxInactivityTimer
parameter value.
Indicates the data
amount LOFD-00101502 /
NO NO NO
preallocated to TDLOFD-00101502
each UE.

Indicates the
LOFD-00101502 /
duration of each NO NO NO
TDLOFD-00101502
smart preallocation.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates whether
to enable SRS
reporting period
adaptation. If this
parameter is set to
ON(On), the SRS
reporting period
adaptively changes LBFD-002003 /
NO NO NO
based on the SRS TDLBFD-002003
algorithm. If this
parameter is set to
OFF(Off), the SRS
reporting period is
specified by the
UserSrsPeriod
parameter.

Indicates the fixed

SRS reporting
period. This
parameter takes LBFD-002003 /
NO NO NO
effect only when the TDLBFD-002003
SrsPeriodAdaptive
parameter is set to
OFF(Off).

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
 LBFD-00201802 /
TDLBFD-00201802
LBFD-00201804 /
TDLBFD-00201804
LBFD-00201805 /
TDLBFD-00201805
TDLOFD-001050
LOFD-001019 /
Indicates the
TDLOFD-001019
maximum number
LOFD-001022 /
of total inter-
TDLOFD-001022
frequency and inter-
LOFD-001043 /
RAT measurement
TDLOFD-001043
objects that can be
NO NO NO LOFD-001072 /
contained in the
TDLOFD-001072
measurement
LOFD-001033 /
control messages
TDLOFD-001033
delivered for UEs in
LOFD-001020 /
RRC_CONNECTE
TDLOFD-001020
D state.
LOFD-001023 /
TDLOFD-001023
LOFD-001046 /
TDLOFD-001046
LOFD-001073 /
TDLOFD-001073
LOFD-001034 /
TDLOFD-001034
Indicates the
maximum number
of E-UTRAN FDD
frequencies
LBFD-00201802 /
(excluding the
TDLBFD-00201802
frequency on which
LBFD-00201804 /
the serving cell
NO NO NO TDLBFD-00201804
works) that can be
LBFD-00201805 /
contained in the
TDLBFD-00201805
measurement
TDLOFD-001050
control messages
delivered to UEs in
RRC_CONNECTE
D state.
Indicates the
maximum number
of E-UTRAN TDD
frequencies
LBFD-00201802 /
(excluding the
TDLBFD-00201802
frequency on which
LBFD-00201804 /
the serving cell
NO NO NO TDLBFD-00201804
works) that can be
LBFD-00201805 /
contained in the
TDLBFD-00201805
measurement
TDLOFD-001050
control messages
delivered to UEs in
RRC_CONNECTE
D state.
Indicates the LOFD-001019 /
maximum number TDLOFD-001019
of UTRAN FDD LOFD-001022 /
frequencies that TDLOFD-001022
can be contained in LOFD-001043 /
NO NO NO
the measurement TDLOFD-001043
control messages LOFD-001072 /
delivered for UEs in TDLOFD-001072
RRC_CONNECTE LOFD-001033 /
D state. TDLOFD-001033
Indicates the LOFD-001019 /
maximum number TDLOFD-001019
of UTRAN TDD LOFD-001022 /
frequencies that TDLOFD-001022
can be contained in LOFD-001043 /
NO NO NO
the measurement TDLOFD-001043
control messages LOFD-001072 /
delivered for UEs in TDLOFD-001072
RRC_CONNECTE LOFD-001033 /
D state. TDLOFD-001033
Indicates the LOFD-001020 /
maximum number TDLOFD-001020
of GERAN LOFD-001023 /
frequencies that TDLOFD-001023
can be contained in LOFD-001046 /
NO NO NO
the measurement TDLOFD-001046
control messages LOFD-001073 /
delivered for UEs in TDLOFD-001073
RRC_CONNECTE LOFD-001034 /
D state. TDLOFD-001034

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the offset
for UL CoMP event
A3. A larger value
indicates that a
neighboring cell
LOFD-001066 /
must have better NO NO NO
TDLOFD-001066
quality for the
reporting of the
event. For details,
see 3GPP TS
36.331.

Indicates the LOFD-003029 /

admission threshold TDLOFD-001075
NO NO NO
for UL CoMP UEs in LOFD-070205 /
an SFN cell. TDLOFD-002008
Indicates the offset
for reporting the UL
CoMP event. This
offset is the
difference between
the signal quality of
a neighboring cell
and that of the
serving cell. A larger NO NO NO LOFD-081219
value indicates that
a neighboring cell
must have better
quality for the
reporting of the
event. For details,
see 3GPP TS
36.331.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates whether a
UE needs to adjust
the transmit power
based on the MCS.
The indication is
sent to the UE
through an RRC
message. The
indication is LBFD-002026 /
NO NO NO
denoted by a bit. Bit TDLBFD-002026
0 indicates that
both Ks and ΔTF
are equal to 0. Bit 1
indicates that Ks is
equal to 1.25 and
ΔTF is calculated.
For details, see
3GPP TS 36.213.
Indicates the power
offset of the
sounding reference
signal to the LBFD-002026 /
NO NO NO
PUSCH when TDLBFD-002026
DeltaMcsEnabled is
set to
UU_DISABLE.

Indicates the power

offset of the
sounding reference
signal to the LBFD-002026 /
NO NO NO
PUSCH when TDLBFD-002026
DeltaMcsEnabled is
set to
UU_ENABLE.
Indicates the alpha
filtering coefficient
used by the UE
LBFD-002026 /
during RSRP NO NO NO
TDLBFD-002026
measurement for
path loss
estimation.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the
measurement
LOFD-001072 /
object type for
TDLOFD-001072
distance-based
LOFD-001073 /
handovers. The NO NO NO
TDLOFD-001073
measurement
LBFD-00201804 /
object type can be
TDLBFD-00201804
E-UTRAN, UTRAN,
or GERAN.
Indicates the
threshold for
distance-based
handovers. If the LBFD-00201804 /
distance between a TDLBFD-00201804
UE and the cell LOFD-001072 /
NO NO NO
center is greater TDLOFD-001072
than this threshold, LOFD-001073 /
a distance-based TDLOFD-001073
handover is
triggered for this
UE.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the ID of
LBFD-002017 /
the DRX parameter YES YES NO
TDLBFD-002017
group.
Indicates whether
bearers to which
the parameter
group applies
support DRX. The
LBFD-002017 /
value ON indicates NO NO NO
TDLBFD-002017
that the bearers
support DRX. The
value OFF indicates
that the bearers do
not support DRX.
Indicates the length
of the On Duration
Timer. Because of
the impact of CQI
reporting intervals
and SRS
LBFD-002017 /
transmission NO NO NO
TDLBFD-002017
intervals, the actual
value of this
parameter assigned
to a UE may be
greater than the
configured value.
Indicates the length
LBFD-002017 /
of the DRX NO NO NO
TDLBFD-002017
inactivity timer.
Indicates the length
of the DRX LBFD-002017 /
NO NO NO
Retransmission TDLBFD-002017
Timer.
advised to
configure this
parameter to a
value that is an
integral multiple of
10. If users hope
that the value
actually assigned to
a UE is equal to or
greater than 80 ms,
set the
TimeAlignmentTime
r parameter to a
value equal to or
greater than 10240
ms. If the
TimingAdvCmdOpt
Switch parameter is
LBFD-002017 /
set to ON, it is NO NO NO
TDLBFD-002017
recommended that
the LongDrxCycle
parameter be set to
a value less than or
equal to 320 ms.
Otherwise, the
uplink time
alignment
performance of UEs
is affected. If the
TimingAdvCmdOpt
Switch parameter is
set to ON, it is
recommended that
the
TimeAlignmentTime
r parameter be set
to sf10240. A

Indicates whether
LBFD-002017 /
short DRX cycles NO NO NO
TDLBFD-002017
are enabled.
Indicates the length
of the short DRX
cycle. According to
3GPP
specifications, the
length of a long
DRX cycle must be
an integer multiple
of that of a short
DRX cycle. In
addition, the actual
value of
LongDrxCycle
assigned to a UE
may be less than LBFD-002017 /
NO NO NO
the configured TDLBFD-002017
value because of
the impact of the
SRS bandwidth and
TA period specified
by the
TimeAlignmentTime
r parameter.
Therefore, the
actual value of
ShortDrxCycle
assigned to a UE
may be less than
the configured
value.
Indicates the length
of the DRX Short
Cycle Timer. If this
parameter is set to
1, the length of this
timer is one short
DRX cycle. If this
parameter is set to
2, the length of this
timer is two short LBFD-002017 /
NO NO NO
DRX cycles. If this TDLBFD-002017
parameter is set to
a large value, a UE
for which short DRX
cycles are enabled
stays in short-cycle
DRX for a long
time. For details,
see 3GPP TS
36.321 5.7.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the
received signal
strength indicator
(RSSI) of the
GERAN BCCH
ARFCN that a UE
needs to measure YES YES NO MRFD-231808
to determine
whether it is
tolerant of the
interference from
the cells working on
this frequency.

Indicates the
GERAN band to
which the absolute
radio frequency
channel number
(ARFCN) that the
UE needs to
measure belongs. If
the GERAN ARFCN
is in the range of
512 to 810, the
value of this
parameter is used
to indicate whether NO NO NO MRFD-231808
the GERAN ARFCN
is in the DCS 1800
MHz band or the
PCS 1900 MHz
band. If the GERAN
ARFCN is in neither
band, this
parameter does not
take effect and can
be set to either
value. For details,
see 3GPP TS
36.331.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
 LOFD-001019 /
TDLOFD-001019
Indicates the ID of
LOFD-001020 /
the common
TDLOFD-001020
parameter group YES YES NO
LOFD-001021 /
related to inter-RAT
TDLOFD-001021
handover.
TDLOFD-001022
TDLOFD-001023

Indicates the
hysteresis of events
A1/A2 for triggering
inter-RAT
measurement. This
parameter is used
LOFD-001019 /
to prevent frequent
TDLOFD-001019
triggering of event
LOFD-001020 /
evaluation caused
TDLOFD-001020
by radio signal NO NO NO
LOFD-001021 /
fluctuation. In this
TDLOFD-001021
way, the probability
TDLOFD-001022
of ping-pong
TDLOFD-001023
handovers or
handover decision
errors is reduced. A
larger value of this
parameter results in
a lower probability.
Indicates the time-
to-trigger of A1/A2
for triggering inter-
RAT measurement.
When detecting that
the signal quality in
the serving cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
LOFD-001019 /
Instead, the UE
TDLOFD-001019
sends a report only
LOFD-001020 /
when the signal
TDLOFD-001020
quality continuously NO NO NO
LOFD-001021 /
meets the entering
TDLOFD-001021
condition during the
TDLOFD-001022
time-to-trigger.
TDLOFD-001023
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong
handovers. In
summary, it helps
prevent
unnecessary
handovers.

Indicates the RSRP

threshold for inter- LOFD-001019 /
RAT measurement TDLOFD-001019
event A1. When the LOFD-001020 /
measured RSRP TDLOFD-001020
NO NO NO
value of the serving LOFD-001021 /
cell exceeds this TDLOFD-001021
threshold, an event TDLOFD-001022
A1 report will be TDLOFD-001023
sent.
Indicates the RSRQ
threshold for inter-
LOFD-001019 /
RAT measurement
TDLOFD-001019
event A1.
LOFD-001020 /
When the
TDLOFD-001020
measured RSRQ NO NO NO
LOFD-001021 /
value of the serving
TDLOFD-001021
cell exceeds this
TDLOFD-001022
threshold, an event
TDLOFD-001023
A1 report will be
sent.

Indicates the RSRP

threshold for inter-
LOFD-001019 /
RAT measurement
TDLOFD-001019
event A2.
LOFD-001020 /
When the
TDLOFD-001020
measured RSRP NO NO NO
LOFD-001021 /
value of the serving
TDLOFD-001021
cell is below this
TDLOFD-001022
threshold, an event
TDLOFD-001023
A2 report will be
sent.

Indicates the RSRQ

threshold for inter-
LOFD-001019 /
RAT measurement
TDLOFD-001019
event A2.
LOFD-001020 /
When the
TDLOFD-001020
measured RSRQ NO NO NO
LOFD-001021 /
value of the serving
TDLOFD-001021
cell is below this
TDLOFD-001022
threshold, an event
TDLOFD-001023
A2 report will be
sent.
Indicates the RSRP
threshold 1 in the
serving cell of event
B2 for triggering E-
UTRAN-to-GERAN
handovers.
When the
measured RSRP in
the serving cell is
LOFD-001020 /
smaller than the NO NO NO
TDLOFD-001020
value of this
parameter and the
RSSI in the
neighboring cell is
larger than the
value of
InterRatHoGeranB1
Thd, the UE reports
the event B2.

Indicates the RSRQ

threshold 1 in the
serving cell of event
B2 for triggering E-
UTRAN-to-GERAN
handovers.
When the
measured RSRQ in
the serving cell is
LOFD-001020 /
smaller than the NO NO NO
TDLOFD-001020
value of this
parameter and the
RSSI in the
neighboring cell is
larger than the
value of
InterRatHoGeranB1
Thd, the UE reports
the event B2.
Indicates the RSRP
threshold 1 in the
serving cell of event
B2 for triggering E-
UTRAN-to-UTRAN
handovers.
When the
measured RSRP in
the serving cell is
smaller than the
value of this
LOFD-001019 /
parameter and the NO NO NO
TDLOFD-001019
RSCP or Ec/N0
threshold in the
neighboring cell is
larger than the
value of
InterRatHoUtranB1
ThdRscp or
InterRatHoUtranB1
ThdEcn0, the UE
reports the event
B2.

Indicates the RSRQ

threshold 1 in the
serving cell of event
B2 for triggering E-
UTRAN-to-UTRAN
handovers.
When the
measured RSRQ in
the serving cell is
smaller than the
value of this
LOFD-001019 /
parameter and the NO NO NO
TDLOFD-001019
RSCP or Ec/N0
threshold in the
neighboring cell is
larger than the
value of
InterRatHoUtranB1
ThdRscp or
InterRatHoUtranB1
ThdEcn0, the UE
reports the event
B2.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the ID of
the parameter
group related to
YES YES NO None
inter-RAT handover
to CDMA2000
1xRTT.
Indicates the
hysteresis for event
B1 for inter-RAT
handover to
CDMA2000 1xRTT.
This parameter is
used to prevent
frequent triggering
of event evaluation
caused by radio
signal fluctuation. In
LOFD-001090 /
this way, the NO NO NO
TDLOFD-001090
probability of ping-
pong handovers or
handover decision
errors is reduced. A
larger value of this
parameter results in
a lower probability
of ping-pong
handovers or
handover decision
errors.

Indicates the pilot

strength threshold
for event B1 related
to coverage-based
inter-RAT handover
to CDMA2000
NO NO NO None
1xRTT. When the
measurement value
exceeds this
threshold, a
measurement
report will be sent.
Indicates the time-
to-trigger for event
B1 related to inter-
RAT handover to
CDMA2000 1xRTT.
When detecting that
the signal quality in
at least one
neighboring cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only LOFD-001090 /
NO NO NO
when the signal TDLOFD-001090
quality continuously
meets the entering
condition during the
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers and the
number of wrong
handovers,
preventing
unnecessary
handovers.

Indicates the pilot

strength threshold
for event B1 related
to load- or service-
based inter-RAT
handover to
LOFD-001021 /
CDMA2000 1xRTT. NO NO NO
TDLOFD-001021
When the
measurement value
exceeds this
threshold, a
measurement
report will be sent.
Indicates the local
cell identity. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the RLF

LBFD-002007 /
timer and constants YES YES NO
TDLBFD-002007
group ID.

Indicates the length

of the timer T301. LBFD-002007 /
NO NO NO
For details, see TDLBFD-002007
3GPP TS 36.331.
Indicates the length
of the timer T310. LBFD-002007 /
NO NO NO
For details, see TDLBFD-002007
3GPP TS 36.331.

Indicates the length

of the timer T311. LBFD-002007 /
NO NO NO
For details, see TDLBFD-002007
3GPP TS 36.331.

Indicates the
maximum number
of successive "out
LBFD-002007 /
of sync" indications NO NO NO
TDLBFD-002007
received from L1.
For details, see
3GPP TS 36.331.
Indicates the
maximum number
of successive "in
LBFD-002007 /
sync" indications NO NO NO
TDLBFD-002007
received from L1.
For details, see
3GPP TS 36.331.

Indicates the
extended QoS
Class Identifier
(QCI), which is YES YES NO LBFD-002032
required by the
operator for service
differentiation.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

LBFD-00201802 /
Indicates the ID of a
TDLBFD-00201802
parameter group
LBFD-00201804 /
related to inter- NO NO NO
TDLBFD-00201804
frequency
LBFD-00201805 /
handover.
TDLBFD-00201805

Indicates the ID of a
parameter group
LOFD-001035
related to inter-RAT NO NO NO
LOFD-001021
handover to
CDMA2000 1xRTT.
Indicates the ID of a
parameter group
related to inter-RAT NO NO NO LOFD-001021
handover to
CDMA2000 HRPD.

LOFD-001019 /
Indicates the ID of a
TDLOFD-001019
group of common
LOFD-001020 /
parameters related NO NO NO
TDLOFD-001020
to inter-RAT
LOFD-001021 /
handover.
TDLOFD-001021

Indicates the ID of a
parameter group
LOFD-001020 /
related to inter-RAT NO NO NO
TDLOFD-001020
handover to
GERAN.

Indicates the ID of a
parameter group
LOFD-001019 /
related to inter-RAT NO NO NO
TDLOFD-001019
handover to
UTRAN.

Indicates the ID of a
parameter group
LBFD-00201801 /
related to intra- NO NO NO
TDLBFD-00201801
frequency
handover.
Indicates the ID of a
LBFD-002017 /
DRX parameter NO NO NO
TDLBFD-002017
group.

Indicates the RLF

LBFD-002007 /
timer and constants NO NO NO
TDLBFD-002007
indication.

Indicates the RLF

LBFD-002007 /
timer and constants NO NO NO
TDLBFD-002007
group ID.

Indicates the
waiting duration for
the eNodeB to
release services
with a specific QCI
after the eNodeB
detects that the
radio link is
abnormal. When
the eNodeB detects
that the radio link is LBFD-002008 /
NO NO NO
abnormal, the TDLBFD-002008
eNodeB waits for
the UE to initiate an
RRC connection
reestablishment
procedure to
restore services. If
the waiting duration
times out, the
eNodeB releases
the services.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the QoS

class identifier
(QCI) of an evolved
packet system
(EPS) bearer.
Different QCIs
LBFD-002025 /
indicate different
TDLBFD-002025
QoS requirements, YES YES NO
LOFD-00101502 /
such as the packet
TDLOFD-00101502
delay budget,
packet error loss
rate, and resource
type. For details,
see Table 6.1.7 in
3GPP TS 23.203.

LBFD-00201802 /
Indicates the ID of a
TDLBFD-00201802
parameter group
LBFD-00201804 /
related to inter- NO NO NO
TDLBFD-00201804
frequency
LBFD-00201805 /
handovers.
TDLBFD-00201805

Indicates the ID of a
LOFD-001035 /
parameter group
TDLOFD-001035
related to inter-RAT NO NO NO
LOFD-001021 /
handover to
TDLOFD-001021
CDMA2000 1xRTT.

Indicates the ID of a
parameter group
LOFD-001021 /
related to inter-RAT NO NO NO
TDLOFD-001021
handover to
CDMA2000 HRPD.

LOFD-001019 /
TDLOFD-001019
Indicates the ID of a LOFD-001020 /
common parameter TDLOFD-001020
NO NO NO
group related to LOFD-001021 /
inter-RAT handover. TDLOFD-001021
TDLOFD-001022
TDLOFD-001023
Indicates the ID of a
parameter group LOFD-001020 /
related to inter-RAT NO NO NO TDLOFD-001020
handover to TDLOFD-001023
GERAN.

Indicates the ID of a
parameter group LOFD-001019 /
related to inter-RAT NO NO NO TDLOFD-001019
handover to TDLOFD-001022
UTRAN.

Indicates the ID of a
parameter group
LBFD-00201801 /
related to intra- NO NO NO
TDLBFD-00201801
frequency
handover.

Indicates the ID of a
LBFD-002017 /
DRX parameter NO NO NO
TDLBFD-002017
group.

Indicates the
interval at which LBFD-002003 /
NO NO NO
scheduling request TDLBFD-002003
indicators are sent.

Indicates the RLF

LBFD-002007 /
timer and constants NO NO NO
TDLBFD-002007
indication.

Indicates the RLF

LBFD-002007 /
timer and constants NO NO NO
TDLBFD-002007
group ID.
Indicates the
waiting duration for
the eNodeB to
release services
with a specific QCI
after the eNodeB
detects that the
radio link is
abnormal. When
the eNodeB detects
that the radio link is LBFD-002008 /
NO NO NO
abnormal, the TDLBFD-002008
eNodeB waits for
the UE to initiate an
RRC connection
reestablishment
procedure to
restore services. If
the waiting duration
times out, the
eNodeB releases
the services.

Indicates the QCI

priority used by
each QCI-based
handover algorithm.
A larger value of
this parameter
indicates a lower
priority. This
parameter applies
to handover
parameter selection
based on QCI
priorities, target
LBFD-00201801
frequency selection
LBFD-00201802
in service-based
LBFD-00201804
inter-frequency NO NO NO
LBFD-00201805
handovers, and
LOFD-001072
inter-RAT handover
LOFD-001073
policy selection. For
a service that
involves all the
preceding selection,
the setting of this
parameter
determines the
handover
parameter, target
frequency, and
handover policy
corresponding to a
QCI.
Indicates the ID of a
mobility load
balancing (MLB)
parameter group for
a QCI. The value
255 is invalid. If this
parameter is set to
a value ranging
from 0 to 9, the ID
must be set in the
associated
NO NO NO TDLOFD-001032
MlbQciGroup MO.
This parameter is
valid only when the
Qci parameter in
the
CellStandardQci
MO is set to 6, 7, 8,
or 9. This
parameter is valid
only for LTE TDD
cells.

Indicates the ID of
the parameter
group related to
preallocations. The LOFD-00101502 /
NO NO NO
value 255 indicates TDLOFD-00101502
an invalid
preallocation
parameter group.

Indicates the QCI-

specific priority for
selecting a DRX
parameter group.A
larger value of this
parameter indicates
a lower priority. If
the bearers for a
UE have multiple
LBFD-002017 /
QCIs and the NO NO NO
TDLBFD-002017
DrxPolicyMode
parameter is set to
QCIPRIORITY(QCI
priority), the
eNodeB selects the
DRX parameter
group for the UE
based on the QCI-
specific priorities.
deselect this option
for the default
bearer. Otherwise,
QCI-based UE
selection policies
for MLB may not
take effect.
INTER_RAT_MLB_
ALLOWED: Inter-
RAT MLB is allowed
to transfer UEs
LOFD-070204
performing services
LOFD-
with the QCI only if
001057/TDLOFD-
this option is
001057
selected.
LOFD-
INTER_RAT_MLB_
001032/TDLOFD-
LOW_PRIO_IND: If
001032
this option is
LOFD-
selected, the NO NO NO
070215/TDLOFD-
eNodeB does not
070215
preferentially select
LOFD-
UEs performing
001044/TDLOFD-
services with the
001044
QCI for inter-RAT
LOFD-
MLB. If this option
001045/TDLOFD-
is deselected, no
001045
policy is applied to
selection of such
UEs for inter-RAT
MLB.
HO_USE_VOIP_FR
EQ_ALLOWED:
The setting of this
option determines
the handover policy
for UEs performing
services with the

LOFD-001032 /
Indicates the ID of TDLOFD-001032
the QCI and E- LOFD-070215 /
NO NO NO
UTRAN frequency TDLOFD-070215
relationship group. LOFD-001057
LOFD-070204

Indicates the ID of
the QCI and LOFD-001044 /
NO NO NO
UTRAN frequency TDLOFD-001044
relationship group.
Indicates the ID of
the QCI and LOFD-001045 /
NO NO NO
GERAN frequency TDLOFD-001045
relationship group.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the ID of
the parameter
group related to LOFD-001021 /
YES YES NO
inter-RAT handover TDLOFD-001021
to CDMA2000
HRPD.
Indicates the
hysteresis for event
B1 related to inter-
RAT handover to
CDMA2000 HRPD.
This parameter is
used to prevent
frequent triggering
of event evaluation
caused by radio
signal fluctuation. In
LOFD-001021 /
this way, the NO NO NO
TDLOFD-001021
probability of ping-
pong handovers or
handover decision
errors is reduced. A
larger value of this
parameter results in
a lower probability
of ping-pong
handovers or
handover decision
errors.

Indicates the pilot

strength threshold
for event B1 related
to load- or service-
based inter-RAT
handover to
LOFD-001021 /
CDMA2000 HRPD. NO NO NO
TDLOFD-001021
When the
measurement value
exceeds this
threshold, a
measurement
report will be sent.
Indicates the time-
to-trigger for event
B1 related to inter-
RAT handover to
CDMA2000 HRPD.
When detecting that
the signal quality in
at least one
neighboring cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only LOFD-001021 /
NO NO NO
when the signal TDLOFD-001021
quality continuously
meets the entering
condition during the
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers and the
number of wrong
handovers,
preventing
unnecessary
handovers.

Indicates the pilot

strength threshold
for event B1 related
to load- or service-
based inter-RAT
handover to
LOFD-001035 /
CDMA2000 HRPD. NO NO NO
TDLOFD-001035
When the
measurement value
exceeds this
threshold, a
measurement
report will be sent.
Indicates the B2
RSRP threshold 1
used during
optimized LOFD-001021 /
NO NO NO
handovers from E- TDLOFD-001021
UTRAN to
CDMA2000
eHRPD.

Indicates the B2
RSRQ threshold 1
used during
optimized LOFD-001021 /
NO NO NO
handovers from E- TDLOFD-001021
UTRAN to
CDMA2000
eHRPD.

Indicates the RSRP

threshold for event
B2 related to
measurement-
based non- LOFD-001021 /
NO NO NO
optimized TDLOFD-001021
handovers from E-
UTRAN to
CDMA2000
eHRPD.

Indicates the RSRQ

threshold for event
B2 related to
measurement-
based non- LOFD-001021 /
NO NO NO
optimized TDLOFD-001021
handovers from E-
UTRAN to
CDMA2000
eHRPD.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
 LOFD-070204
Indicates the LOFD-
downlink (DL) E- 001057/TDLOFD-
UTRA absolute 001057
radio frequency LOFD-
YES YES NO
channel number 001032/TDLOFD-
(EARFCN) 001032
associated with the LOFD-
QCI. 070215/TDLOFD-
070215

LOFD-070204
LOFD-
001057/TDLOFD-
Indicates the ID of 001057
the QCI and E- LOFD-
YES YES NO
UTRAN frequency 001032/TDLOFD-
relationship group. 001032
LOFD-
070215/TDLOFD-
070215

Indicates whether
the neighboring E-
UTRAN frequency
can be a target
frequency in QCI-
specific mobility
management. LOFD-070204
MlbTargetInd(MlbTa LOFD-
rgetInd): The 001057/TDLOFD-
neighboring E- 001057
UTRAN frequency LOFD-
NO NO NO
can be a target 001032/TDLOFD-
frequency in QCI- 001032
specific MLB only if LOFD-
this option is 070215/TDLOFD-
selected. You are 070215
advised to select
this option for the
default bearer.
Otherwise, MLB
may not transfer
UEs.
Indicates the local
ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the ID of
the GERAN
LOFD-001045 /
frequency group YES YES NO
TDLOFD-001045
associated with the
QCI.

Indicates the ID of
the relationship
LOFD-001045 /
group of the QCI YES YES NO
TDLOFD-001045
and the GERAN
frequency group.
Indicates whether
the GERAN
frequency group
can be a target
frequency in QCI-
specific mobility
management.
MlbTargetInd(MlbTa
rgetInd): The
GERAN frequency
LOFD-001045 /
group can be a NO NO NO
TDLOFD-001045
target in QCI-
specific MLB only if
this option is
selected. You are
advised to select
this option for the
default bearer.
Otherwise, MLB
may not transfer
UEs.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the
downlink (DL)
UTRA absolute
LOFD-
radio frequency
YES YES NO 001044/TDLOFD-
channel number
001044
(UARFCN)
associated with the
QCI.
Indicates the ID of
LOFD-
the QCI and
YES YES NO 001044/TDLOFD-
UTRAN frequency
001044
relationship group.

Indicates whether
the UTRAN
frequency can be a
target frequency in
QCI-specific
mobility
management.
MlbTargetInd(MlbTa
rgetInd): The
UTRAN frequency LOFD-
can be a target NO NO NO 001044/TDLOFD-
frequency in QCI- 001044
specific MLB only if
this option is
selected. You are
advised to select
this option for the
default bearer.
Otherwise, MLB
may not transfer
UEs.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the ID of
the parameter LOFD-001020 /
group related to YES YES NO TDLOFD-001020
inter-RAT handover TDLOFD-001023
to GERAN.

Indicates the
hysteresis for event
B1 related to inter-
RAT handover to
GERAN. This
parameter is used
to prevent frequent
triggering of event
evaluation caused
by radio signal
fluctuation. In this LOFD-001020 /
way, the probability NO NO NO TDLOFD-001020
of ping-pong TDLOFD-001023
handovers or
handover decision
errors is reduced. A
larger value of this
parameter results in
a lower probability
of ping-pong
handovers or
handover decision
errors.
Indicates the RSSI
threshold for event
B1 related to
coverage-based
inter-RAT handover
to GERAN.
A UE sends a
measurement
report related to
LOFD-001020 /
event B1 to the NO NO NO
TDLOFD-001020
eNodeB when the
RSSI in at least one
GERAN cell
exceeds this
threshold and other
triggering
conditions are met.
For details, see
3GPP TS 36.331.

Indicates the time-

to-trigger for event
B1 related to inter-
RAT handover to
GERAN. When
detecting that the
signal quality in at
least one
neighboring cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
LOFD-001020 /
sends a report only
NO NO NO TDLOFD-001020
when the signal
TDLOFD-001023
quality continuously
meets the entering
condition during the
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers and the
number of wrong
handovers,
preventing
unnecessary
handovers.
Indicates the RSSI
threshold for event
B1 related to load-
or service-based
inter-RAT handover
to GERAN. LOFD-001046 /
NO NO NO
When the TDLOFD-001046
measured RSSI
value exceeds this
threshold, a
measurement
report will be sent.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the ID of
the parameter LOFD-001019 /
group related to YES YES NO TDLOFD-001019
inter-RAT handover TDLOFD-001022
to UTRAN.
Indicates the Ec/N0
threshold for event
B1 related to
coverage-based
inter-RAT handover
to UTRAN. This
parameter specifies
the requirement for
Ec/N0 of the target
UTRAN cell. For a
cell with large signal
fading variance, set
this parameter to a
large value to
prevent
unnecessary
handovers. For a
cell with small LOFD-001019 /
signal fading NO NO NO TDLOFD-001019
variance, set this TDLOFD-001022
parameter to a
small value to
ensure timely
handovers. A large
value of this
parameter results in
a low probability of
handover to the
UTRAN cell, and a
small value leads to
a high probability.
When the
measurement value
exceeds this
threshold, a
measurement
report will be sent.

Indicates the RSCP

threshold for event
B1 related to
coverage-based
inter-RAT handover
to UTRAN.
This parameter
specifies the LOFD-001019 /
requirement for NO NO NO TDLOFD-001019
RSCP of the target TDLOFD-001022
UTRAN cell.
When the
measurement value
exceeds this
threshold, a
measurement
report will be sent.
Indicates the
hysteresis for event
B1 related to inter-
RAT handover to
UTRAN. This
parameter is used
to prevent frequent
triggering of event
evaluation caused
by radio signal
fluctuation. In this LOFD-001019 /
way, the probability NO NO NO TDLOFD-001019
of ping-pong TDLOFD-001022
handovers or
handover decision
errors is reduced. A
larger value of this
parameter results in
a lower probability
of ping-pong
handovers or
handover decision
errors.
Indicates the time-
to-trigger for event
B1 related to inter-
RAT handover to
UTRAN. When
detecting that the
signal quality in at
least one
neighboring cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
LOFD-001019 /
sends a report only
NO NO NO TDLOFD-001019
when the signal
TDLOFD-001022
quality continuously
meets the entering
condition during the
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers and the
number of wrong
handovers,
preventing
unnecessary
handovers.
Indicates the Ec/N0
threshold for event
B1 related to load-
or service-based
inter-RAT handover
to UTRAN.
This parameter
specifies the
requirement for
Ec/N0 of the target
UTRAN cell. When
the measurement
value exceeds this
threshold, a
measurement
LOFD-001043
report may be sent. NO NO NO
TDLOFD-001022
For a cell with large
signal fading
variance, set this
parameter to a
large value to
prevent
unnecessary
handovers. For a
cell with small
signal fading
variance, set this
parameter to a
small value to
ensure timely
handovers.

Indicates the RSCP

threshold for event
B1 related to load-
or service-based
inter-RAT handover
to UTRAN.
This parameter
specifies the
LOFD-001043
requirement for NO NO NO
TDLOFD-001022
RSCP of the target
UTRAN cell.
When the
measurement value
exceeds this
threshold, a
measurement
report will be sent.
 LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-001002
Indicates the local
LAOFD-00100202 /
ID of the cell, which
TDLAOFD-
uniquely identifies a YES YES NO
00100102
cell within an
LAOFD-070201 /
eNodeB.
TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111

LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-001002
Indicates the ID of
LAOFD-00100202 /
the eNodeB to
TDLAOFD-
which the candidate YES YES NO
00100102
secondary serving
LAOFD-070201 /
cell (SCell) belongs.
TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111
 LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-001002
Indicates the local
LAOFD-00100202 /
cell ID of the
TDLAOFD-
candidate YES YES NO
00100102
secondary serving
LAOFD-070201 /
cell (SCell).
TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111

this parameter
takes effect if the
SccBlindCfgSwitch
option of the
CaAlgoSwitch
parameter is
selected. In
adaptive
configuration mode,
this parameter
takes effect
regardless of the
SccBlindCfgSwitch
LAOFD-00100101
setting.
LAOFD-00100102
If this parameter is
LAOFD-00100201 /
set to
TDLAOFD-001002
TRUE(TRUE), the
LAOFD-00100202 /
eNodeB can
TDLAOFD-
configure this NO NO NO
00100102
candidate SCell as
LAOFD-070201 /
an SCell for CA
TDLAOFD-070201
UEs in a blind
LAOFD-070202
manner, without
TDLAOFD-
delivering A4-
00100111
related
measurement
configurations to
CA UEs.
If this parameter is
set to
FALSE(FALSE), the
eNodeB cannot
configure this
candidate SCell as
an SCell for CA
UEs in a blind
manner. The
Indicates the
priority of the
candidate
secondary serving LAOFD-00100101
cell (SCell). A larger LAOFD-00100102
value of this LAOFD-00100201 /
parameter indicates TDLAOFD-001002
a higher priority and LAOFD-00100202 /
results in a higher TDLAOFD-
NO NO NO
probability of being 00100102
configured as an LAOFD-070201 /
SCell for carrier TDLAOFD-070201
aggregation (CA) LAOFD-070202
UEs.The value 0 TDLAOFD-
indicates that this 00100111
cell cannot be
configured as an
SCell for CA UEs.

This parameter
specifies the offset
to
CarrAggrA4ThdRsr
p. When a CA UE
treats the cell
specified by the
LocalCellId
parameter in the
local eNodeB as its
PCell, the UE
reports event A4
LAOFD-00100101
pertaining to the
LAOFD-00100102
candidate SCell
LAOFD-00100201 /
specified by the
TDLAOFD-001002
SCelleNodeBId and
LAOFD-00100202 /
SCellLocalCellId
TDLAOFD-
parameters to the NO NO NO
00100102
eNodeB if the
LAOFD-070201 /
RSRP for the
TDLAOFD-070201
candidate SCell
LAOFD-070202
exceeds the sum of
TDLAOFD-
the
00100111
CarrAggrA4ThdRsr
p and
SCellA4Offset
parameter values. If
the sum is greater
than –43 dBm or
less than –140
dBm, the threshold
for event A4 takes
the value –43 dBm
or –140 dBm,
respectively.
Indicates the offset
to
CarrAggrA2ThdRsr
p. When a CA UE
treats the cell
specified by the
LocalCellId
parameter in the
local eNodeB as its
PCell, the UE
reports event A2
pertaining to the LAOFD-00100101
candidate SCell LAOFD-00100102
specified by the LAOFD-00100201 /
SCelleNodeBId and TDLAOFD-001002
SCellLocalCellId LAOFD-00100202 /
parameters to the TDLAOFD-
NO NO NO
eNodeB if the 00100102
RSRP for the LAOFD-070201 /
candidate SCell TDLAOFD-070201
exceeds the sum of LAOFD-070202
the TDLAOFD-
CarrAggrA2ThdRsr 00100111
p and
SCellA2Offset
parameter values. If
the sum is greater
than –43 dBm or
less than –140
dBm, the threshold
for event A2 takes
the value –43 dBm
or –140 dBm,
respectively.

Indicates the ID of
an SPID group,
which identifies a
group of UEs
whose SPIDs
belong to the same
group. If this
parameter is set to TDLOFD-00105401
a value ranging TDLOFD-001059
from 0 to 255, the TDLAOFD-001002
eNodeB does not TDLAOFD-
configure certain 00100102
NO NO NO
candidate SCCs of TDLAOFD-070201
UEs that belong to TDLAOFD-
the identified SPID 00100111
group as SCCs for MRFD-101231
CA. If this TDLAOFD-110401
parameter is set to
65535, SCCs are
normally configured
for UEs. This
parameter applies
only to LTE TDD
networks.
Indicates the local
ID of the cell, which
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the offset

for event A3. This
offset is the
difference between
the signal quality of
a neighboring cell
and that of the NO NO NO None
serving cell. A larger
value indicates a
higher requirement
on neighboring cell
quality for reporting
event A3.

Indicates the
hysteresis for
reporting event A3
or A6. This
parameter is used
to prevent frequent
entering or leaving NO NO NO None
of event A3 or A6
and decision errors
due to radio signal
fluctuation. For
details, see 3GPP
TS 36.331.
Indicates the time-
to-trigger for
reporting event A3
or A6. When
detecting that the
signal quality in the
serving cell and that
in at least one
neighboring cell
meet the entering
condition, the UE
does not report the NO NO NO None
event to the
eNodeB
immediately.
Instead, the UE
reports the event
only when the
signal quality
continuously meets
the entering
condition during the
time-to-trigger.

Indicates the
maximum number
of cells to be
included in each
measurement
NO NO NO None
report after event
A3 or A6 is
triggered. For
details, see 3GPP
TS 36.331.
Indicates the
number of periodic
measurement
reports that are
NO NO NO None
sent after event A3
or A6 is triggered.
For details, see
3GPP TS 36.331.

Indicates the
interval between
periodic
measurement
reports that are NO NO NO None
sent after event A3
or A6 is triggered.
For details, see
3GPP TS 36.331.
report after event
A3 or A6 is
triggered, which
can be set to
SAME_AS_TRIG_
QUAN(Same as
Trig Quan) or
BOTH(Both). The
value
SAME_AS_TRIG_
QUAN(Same as
Trig Quan)
indicates that the
type of the value to
be included in the
measurement
report is the same
as that specified by
the TriggerQuantity NO NO NO None
parameter. The
value BOTH(Both)
indicates that both
RSRP and RSRQ
values are included
in the measurement
report. The
measured RSRP
values are stable,
slightly varying with
the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
values vary with the
load and are likely
to reflect the signal

Indicates whether
event A3 or A6 is
triggered based on
RSRP or RSRQ
values. The
measured RSRP
values are stable,
slightly varying with
the load, and
NO NO NO None
therefore there is
little signal
fluctuation. The
measured RSRQ
values vary with the
load and are likely
to reflect the signal
quality of the cell in
real time.
Indicates the offset
for event A6. This
offset is the
difference between
the signal quality of
a neighboring cell
and that of the NO NO NO None
serving cell. A larger
value indicates a
higher requirement
on neighboring cell
quality for reporting
event A6.

Indicates the
maximum number
of intra-frequency
cells to be included
in each intra-
NO NO NO None
frequency periodic
measurement
report. For details,
see 3GPP TS
36.331.
Indicates the
quantity used to
evaluate the
triggering condition
for the intra-
frequency periodic
measurement. The
quantity can be
RSRP or RSRQ.
The measured
RSRP values are
stable, slightly
NO NO NO None
varying with the
load, and therefore
there is little signal
fluctuation. The
measured RSRQ
values vary with the
load and are likely
to reflect the signal
quality of the cell in
real time. For
details, see 3GPP
TS 36.331.
report. It can be
either the same as
the triggering
quantity for intra-
frequency periodic
measurement
reports or both
RSRP and RSRQ.
The value
SAME_AS_TRIG_
QUAN(Same as
Trig Quan)
indicates that the
quantity to be
included in the
measurement
report is the same
as that specified by
the NO NO NO None
IntraFreqTriggerQu
antity parameter.
The value
BOTH(Both)
indicates that both
RSRP and RSRQ
values are included
in the measurement
report. The
measured RSRP
values are stable,
slightly varying with
the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
values vary with the
Indicates the
maximum number
of inter-frequency
cells to be included
in each inter-
NO NO NO None
frequency periodic
measurement
report. For details,
see 3GPP TS
36.331.

Indicates the
quantity used to
evaluate the
triggering condition
for the inter-
frequency periodic
measurement. The
quantity can be
RSRP or RSRQ.
The measured
RSRP values are
stable, slightly
NO NO NO None
varying with the
load, and therefore
there is little signal
fluctuation. The
measured RSRQ
values vary with the
load and are likely
to reflect the signal
quality of the cell in
real time. For
details, see 3GPP
TS 36.331.
report. It can be
either the same as
the triggering
quantity for inter-
frequency periodic
measurement
reports or both
RSRP and RSRQ.
The value
SAME_AS_TRIG_
QUAN(Same as
Trig Quan)
indicates that the
quantity to be
included in the
measurement
report is the same
as that specified by
the NO NO NO None
InterFreqTriggerQu
antity parameter.
The value
BOTH(Both)
indicates that both
RSRP and RSRQ
values are included
in the measurement
report. The
measured RSRP
values are stable,
slightly varying with
the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
values vary with the
Indicates whether
to enable adaptive
A3 measurement
control. This
parameter includes
the following option:
UlCoMPA3RptInterv
alAdapt: If this
option is selected, LOFD-001066 /
parameter TDLOFD-001066
configurations LOFD-070222 /
related to A3 NO NO NO TDLOFD-081208
measurement LOFD-070223 /
report can be TDLOFD-081207
adaptively modified. LOFD-081219
If this option is
deselected,
parameter
configurations
related to A3
measurement
report cannot be
adaptively modified.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the ID of
the parameter
group related to YES YES NO None
inter-frequency
handover.

Indicates the
hysteresis of events
A1/A2 for triggering
inter-frequency
measurement. This
parameter is used
to prevent frequent
triggering of event
evaluation caused
LBFD-00201802 /
by radio signal NO NO NO
TDLBFD-00201802
fluctuation. In this
way, the probability
of ping-pong
handovers or
handover decision
errors is reduced. A
larger value of this
parameter results in
a lower probability.
Indicates the time-
to-trigger of event
A1/A2 for triggering
inter-frequency
measurement.
When detecting that
the signal quality in
the serving cell
meets the triggering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
Instead, the UE
sends a report only
when the signal LBFD-00201802 /
NO NO NO
quality continuously TDLBFD-00201802
meets the entering
condition during the
time-to-trigger. This
parameter helps
decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong
handovers. In
summary, it helps
prevent
unnecessary
handovers.

Indicates the RSRP

threshold for event
A1 of A4/A5 based
inter-frequency
handover.When the LBFD-00201802 /
NO NO NO
measured RSRP TDLBFD-00201802
value exceeds this
threshold, a
measurement
report will be sent.
Indicates the RSRQ
threshold for event
A1 of A4/A5 based
inter-frequency
handover.
LBFD-00201802 /
When the NO NO NO
TDLBFD-00201802
measured RSRQ
value exceeds this
threshold, a
measurement
report will be sent.

Indicates the RSRP

threshold for event
A2 of A4/A5 based
inter-frequency
handover.
LBFD-00201802 /
When the NO NO NO
TDLBFD-00201802
measured RSRP
value is below the
threshold, a
measurement
report will be sent.
Indicates the RSRQ
threshold for event
A2 of A4/A5 based
inter-frequency
handover.
LBFD-00201802 /
When the NO NO NO
TDLBFD-00201802
measured RSRQ
value is below this
threshold, a
measurement
report will be sent.

Indicates the
hysteresis for event
A4. This parameter
is used to prevent
frequent triggering
of event evaluation LBFD-00201802 /
caused by radio TDLBFD-00201802
signal fluctuation. In LBFD-00201804 /
NO NO NO
this way, the TDLBFD-00201804
probability of ping- LBFD-00201805 /
pong handovers or TDLBFD-00201805
handover decision
errors is reduced. A
larger value of this
parameter results in
a lower probability.
Indicates the RSRP
threshold for event
A4 related to
coverage-based
inter-frequency
handover. When
the measured
RSRP value
exceeds this
threshold, event A4 LBFD-00201802 /
is reported. The TDLBFD-00201802
NO NO NO
value of this LBFD-00201804 /
parameter is also TDLBFD-00201804
used as the RSRP
threshold for event
A4 related to
distance-based,
UL-power-based, or
SPID-based inter-
frequency handover
back to the
HPLMN.
Indicates the RSRQ
threshold for event
A4 related to
coverage-based
inter-frequency
handover. When
the measured
RSRQ value
exceeds this
threshold, event A4 LBFD-00201802 /
is reported. The TDLBFD-00201802
NO NO NO
value of this LBFD-00201804 /
parameter is also TDLBFD-00201804
used as the RSRQ
threshold for event
A4 related to
distance-based,
UL-power-based, or
SPID-based inter-
frequency handover
back to the
HPLMN.
Indicates the time-
to-trigger for event
A4 for the inter-
frequency
handover. When
detecting that the
signal quality in at
least one
neighboring cell
meets the entering
condition, the UE
does not send a
measurement
report to the
eNodeB
immediately.
LBFD-00201802 /
Instead, the UE
TDLBFD-00201802
sends a report only
LBFD-00201804 /
when the signal NO NO NO
TDLBFD-00201804
quality continuously
LBFD-00201805 /
meets the entering
TDLBFD-00201805
condition during the
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong
handovers. In
summary, it helps
prevent
unnecessary
handovers.
Indicates the RSRP
threshold for event
A4 related to load-
based inter-
frequency
handovers. When
the measured
RSRP value
exceeds this
threshold, event A4
is reported. This
parameter also LBFD-00201805 /
NO NO NO
specifies the RSRP TDLBFD-00201805
threshold for inter-
frequency event A4
related to
frequency-priority-
based handovers,
service-based
handovers,
handovers of low-
mobility UEs, or
redirection of high-
mobility UEs.
Indicates the RSRQ
threshold for event
A4 related to load-
based inter-
frequency
handovers. When
the measured
RSRQ value
exceeds this
threshold, event A4
is reported. This
parameter also LBFD-00201805 /
NO NO NO
specifies the RSRQ TDLBFD-00201805
threshold for inter-
frequency event A4
related to
frequency-priority-
based handovers,
service-based
handovers,
handovers of low-
mobility UEs, or
redirection of high-
mobility UEs.

Indicates the RSRP

threshold for
frequency-priority-
based inter-
frequency
measurement event
NO NO NO None
A1. When the
measured RSRP
value exceeds this
threshold, an event
A1 report will be
sent.

Indicates the RSRQ

threshold for
frequency-priority-
based inter-
frequency
measurement event
A1. NO NO NO None
When the
measured RSRQ
value exceeds this
threshold, an event
A1 report will be
sent.
Indicates the offset
for event A3
associated with
inter-frequency
handover. This
parameter
determines the
border between the
serving cell and the
neighboring cell. If
the parameter is set
to a large value, an
LBFD-00201802 /
inter-frequency NO NO NO
TDLBFD-00201802
handover is
performed only
when the signal
quality of the
neighboring cell is
significantly better
than that of the
serving cell and
other triggering
conditions are met.
For details, see
3GPP TS 36.331.

Indicates the RSRP

threshold for event
A1 of A3 based
inter-frequency
handover. When
LBFD-00201802 /
the measured NO NO NO
TDLBFD-00201802
RSRP value
exceeds this
threshold, a
measurement
report will be sent.
Indicates the RSRP
threshold for event
A2 of A3 based
inter-frequency
handover. When
LBFD-00201802 /
the measured NO NO NO
TDLBFD-00201802
RSRP value
exceeds this
threshold, a
measurement
report will be sent.

Indicates the RSRP

threshold for
frequency-priority-
based inter-
frequency
measurement event
NO NO NO None
A2.
If the measured
RSRP value is less
than this threshold,
an event A2 report
will be sent.

Indicates the RSRQ

threshold for inter-
frequency
measurement event
A2.
When the NO NO NO None
measured RSRQ
value is below this
threshold, a
measurement
report will be sent.
Indicates the RSRP
threshold for the
A1/A2 event that is
used for location-
based UE priority
selection during
MLB that is based
on the number of
UEs performing
downlink data
transmission. If cell
center users are
preferably selected,
the UEs whose
RSRP values are
higher than this NO NO NO TDLOFD-001033
threshold and
reports A1 events
are selected to
perform MLB. If cell
edge users are
preferably selected,
the UEs whose
RSRP values are
lower than this
threshold and
reports A2 events
are selected to
perform MLB. This
parameter is set
only for TDD cells.

Indicates the RSRP

threshold 1 in the
serving cell of event
A5 for triggering
inter-frequency
handovers.
When the
measured RSRP in
the serving cell is
smaller than the
LBFD-00201802 /
value of this NO NO NO
TDLBFD-00201802
parameter and the
RSRP or RSRQ in
the neighboring cell
is higher than the
value of
InterFreqHoA4Thd
Rsrp or
InterFreqHoA4Thd
Rsrq, the UE
reports event A5.
Indicates the RSRQ
threshold 1 in the
serving cell of event
A5 for triggering
inter-frequency
handovers.
When the
measured RSRQ in
the serving cell is
smaller than the
LBFD-00201802 /
value of this NO NO NO
TDLBFD-00201802
parameter and the
RSRP or RSRQ in
the neighboring cell
is higher than the
value of
InterFreqHoA4Thd
Rsrp or
InterFreqHoA4Thd
Rsrq, the UE
reports event A5.

Indicates the RSRP

threshold of event
A4 for triggering
service-request-
based inter-
frequency
handovers.
If the RSRP
in the neighboring
cell is greater than
this parameter
value, the
UE reports event
A4.
NO NO NO TDLOFD-070228
A small value of this
parameter
increases
the possibility of
triggering a
handover while a
large value of this
parameter reduces
the possibility of
triggering a
handover. This
parameter
applies only to LTE
TDD cells.
Indicates the RSRQ
threshold of event
A4 for triggering
service-request-
based inter-
frequency
handovers.
If the RSRQ
in the neighboring
cell is greater than
this parameter
value, the
UE reports event
A4.
A small value of this NO NO NO TDLOFD-070228
parameter
increases
the possibility of
triggering a
handover while a
large value of this
parameter
reduces the
possibility of
triggering a
handover.
This parameter
applies only to LTE
TDD cells.
Indicates the RSRP
threshold 1 of the
serving cell for
event A5 related to
inter-frequency
measurements for
MLB. If the
measured RSRP of
the serving cell is LOFD-001032 /
lower than the TDLOFD-001032
MlbInterFreqHoA5T NO NO NO LOFD-070215 /
hd1Rsr parameter TDLOFD-070215
value and the LOFD-070204
measured RSRP of
a neighboring cell is
higher than the
InterFreqLoadBase
dHoA4ThdRsrp
parameter value,
the UE reports
event A5.
Indicates the RSRQ
threshold 1 of the
serving cell for
event A5 related to
inter-frequency
measurements for
MLB. If the
measured RSRQ of
the serving cell is LOFD-001032 /
lower than the TDLOFD-001032
MlbInterFreqHoA5T NO NO NO LOFD-070215 /
hd1Rsr parameter TDLOFD-070215
value and the LOFD-070204
measured RSRQ of
a neighboring cell is
higher than the
InterFreqLoadBase
dHoA4ThdRsrq
parameter value,
the UE reports
event A5.
Indicates the offset
of the A4 threshold
of the target cell
related to UL-
quality-based inter-
frequency
handovers to the A4
threshold related to
coverage-based
inter-frequency
handovers. This
offset applies to
RSRP- and RSRQ-
based A4
thresholds. The
actual threshold for
event A4 is equal to
the sum of the
threshold for event NO NO NO None
A4 related to
coverage-based
inter-frequency
handovers and the
UlBadQualHoA4Off
set parameter
value. If the sum is
less than the
3GPP-defined
minimum value or
greater than the
3GPP-defined
maximum value, the
3PGG-defined
minimum or
maximum value is
delivered,
respectively.

Indicates the RSRQ

threshold for event
LBFD-00201802 /
A1 of A3 based NO NO NO
TDLBFD-00201802
inter-frequency
handover.
Indicates the RSRQ
threshold for event
LBFD-00201802 /
A2 of A3 based NO NO NO
TDLBFD-00201802
inter-frequency
handover.

Indicates the RSRP

threshold for
triggering inter-
frequency
measurement event
A4 during
handovers for
uplink heavy traffic-
based MLB. When
the measured NO NO NO TDLOFD-081236
RSRP exceeds the
threshold specified
by this parameter,
inter-frequency
measurement event
A4 is reported. This
parameter applies
only to LTE TDD
networks.

Indicates the RSRQ

threshold for
triggering inter-
frequency
measurement event
A4 during
handovers for
uplink heavy traffic-
based MLB. When
the measured NO NO NO TDLOFD-081236
RSRQ exceeds the
threshold specified
by this parameter,
inter-frequency
measurement event
A4 is reported. This
parameter applies
only to LTE TDD
networks.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the ID of
the parameter
group related to YES YES NO None
intra-frequency
handover.

Indicates the
hysteresis for intra-
frequency handover
event A3. This
parameter
decreases frequent
event triggering due
to radio signal
fluctuations and
reduces the
probability of
handover decision
LBFD-00201801 /
errors and ping- NO NO NO
TDLBFD-00201801
pong handovers. A
larger value of this
parameter results in
a lower probability.
The hysteresis for
event inter-
frequency handover
event A3 is the
same as the value
of this parameter.
For details, see
3GPP TS 36.331.
Indicates the offset
for event A3. If the
parameter is set to
a large value, an
intra-frequency
handover is
performed only
when the signal
LBFD-00201801 /
quality of the NO NO NO
TDLBFD-00201801
neighboring cell is
significantly better
than that of the
serving cell and
other triggering
conditions are met.
For details, see
3GPP TS 36.331.

event A3.
When the UE
detects that the
signal quality in the
serving cell and that
in at least one
neighboring cell
meet the entering
condition, it does
not immediately
send a
measurement
report to the
eNodeB. Instead,
the UE sends a
report only when
the signal quality
meets the entering
LBFD-00201801 /
condition NO NO NO
TDLBFD-00201801
throughout the
time-to-trigger.
This parameter
helps decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of incorrect
handovers,
preventing
unnecessary
handovers. The
time-to-trigger for
inter-frequency
handover event A3
Indicates the local
identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the QoS

class identifier
(QCI) of an evolved
packet system
(EPS) bearer.
Different QCIs
indicate different
QoS requirements, YES YES NO None
such as the packet
delay budget,
packet error loss
rate, and resource
type. For details,
see Table 6.1.7 in
3GPP TS 23.203.

Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 10 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 11 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 12 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 13 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 14 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 15 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 16 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 17 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 18 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 19 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 20 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 21 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

LOFD-001036
LOFD-001037
Indicates the index
YES YES NO LOFD-001086
of the operator.
TDLOFD-001112
LOFD-070206

LOFD-001036 /
TDLOFD-001036
LOFD-001037 /
Indicates the name TDLOFD-001037
NO YES NO
of the operator. LOFD-001086 /
TDLOFD-001086
TDLOFD-001112
LOFD-070206

Indicates the type

of the operator. The
LOFD-001036 /
operator can be the
TDLOFD-001036
primary operator or
LOFD-001037 /
a secondary
TDLOFD-001037
operator. For each NO YES NO
LOFD-001086 /
eNodeB, only one
TDLOFD-001086
primary operator
TDLOFD-001112
but more than one
LOFD-070206
secondary operator
can be configured.
 LOFD-001036 /
TDLOFD-001036
LOFD-001037 /
Indicates the mobile
TDLOFD-001037
country code (MCC) NO YES NO
LOFD-001086 /
of the operator.
TDLOFD-001086
TDLOFD-001112
LOFD-070206

Indicates the mobile

network code LOFD-001036 /
(MNC) of the TDLOFD-001036
operator. The value LOFD-001037 /
of this parameter is TDLOFD-001037
NO YES NO
a string of two or LOFD-001086 /
three characters, TDLOFD-001086
each of which must TDLOFD-001112
be a digit in the LOFD-070206
range from 0 to 9.

Indicates the ID of
YES YES NO None
the IP path.

LOFD-001036 /
Indicates the ID of TDLOFD-001036
NO YES NO
the operator. LOFD-001037 /
TDLOFD-001037
Indicates the
tracking area ID,
which uniquely
identifies an entry
of tracking area
information. This
LOFD-001036 /
parameter is used
TDLOFD-001036
only within the
YES YES NO LOFD-001037 /
eNodeB and is not
TDLOFD-001037
used during the
LOFD-070206
information
exchange with the
EPC. This is
different from the
TAI configured in
the EPC TAL.

LOFD-001036 /
TDLOFD-001036
Indicates the index
NO YES NO LOFD-001037 /
of the operator.
TDLOFD-001037
LOFD-070206

Indicates the
tracking area code
(TAC), which is
LOFD-001036 /
used by the EPC to
TDLOFD-001036
determine the area
NO YES NO LOFD-001037 /
within which paging
TDLOFD-001037
messages are sent.
LOFD-070206
One tracking area
is comprised of one
or more cells.

Indicates the ID of a
carrier-sharing
operator group.
This parameter YES YES NO LOFD-070206
uniquely specifies a
carrier-sharing
operator group.
Indicates the ID of
the primary
operator in a NO YES NO LOFD-070206
carrier-sharing
operator group.

Indicates the list of

secondary
operators in a NO YES NO LOFD-070206
carrier-sharing
operator group.

Indicates the ID of a
secondary operator
YES YES NO LOFD-070206
in a carrier-sharing
operator group.

LOFD-001036 /
Indicates the id of TDLOFD-001036
YES YES NO
the operator. LOFD-001037 /
TDLOFD-001037
Indicates whether
to enable or disable
emergency calls. It
is recommended
that this parameter LBFD-002028 /
NO NO NO
be set to a value in TDLBFD-002028
accordance with the
actual emergency
call capability of the
operator.
Indicates whether
the operator
supports
LBFD-002028 /
emergency calls NO NO NO
TDLBFD-002028
initiated by UEs in
the limited service
state.
Indicates the
Allocation and
Retention Priority
LBFD-002028 /
(ARP) value of the NO NO NO
TDLBFD-002028
dedicated
emergency call
bearer.
Indicates the
Allocation and
Retention Priority LBFD-002028 /
NO NO NO
(ARP) value of the TDLBFD-002028
default emergency
call bearer.
Indicates the mode
of outputting call
history records
(CHRs).ALL_OUTP
UT means both
normal and
abnormal calls are
output. When there
is no storage space
for new CHRs, a
new record will
cover the beginning
one.ABNORMAL_N
ORMAL_SAMPLE
means calls are
output based on the
storage space and NO NO NO None
the proportion of
normalcalls to
abnormal calls.
Ensure that CHR
recording time
meets the
requirement.ABNO
RMAL_ALL_NORM
AL_SAMPLE
means all abnormal
calls are output and
the normal calls are
output based on the
proportion of
normal calls to
abnormal calls.
Indicates the
percentage of
CHRs for abnormal
calls in the CHR
output. For
example, if this
parameter is set to
90, the percentage
of CHRs for
abnormal calls in
the CHR output is
90%, and that of
CHRs for normal
NO NO NO None
calls is 10%. This
parameter is invalid
when the
OutPutMode
parameter is set to
ALL_OUTPUT(All
Output). This
parameter takes
effect immediately
after being set or
modified, and the
CHR output will be
refreshed.
Indicates the
maximum number
of call history
records (CHRs) that
can be stored. For
example, if this
parameter is set to
4000, 4000 CHRs
can be stored. (The
size of a CHR for
one call is about 6
KB, and the storage
space is 24 MB.)
This parameter is
invalid if the
OutPutMode
parameter is set to NO NO NO None
ALL_OUTPUT or
ABNORMAL_ALL_
NORMAL_SAMPLE
. If the OutPutMode
parameter is set to
ABNORMAL_NOR
MAL_SAMPLE, the
value of this
parameter indicates
the expected
number of CHRs
that can be stored,
which should be set
based on the actual
storage space and
the size of a CHR.

Indicates the time

when CHRs are
uploaded. If this
parameter is set to
FIXED_TIME,
CHRs are uploaded
at a fixed time
based on the
NO NO NO None
standard time. If
this parameter is
set to
NON_FIXED_TIME,
CHRs are uploaded
at a specific interval
since system
startup.
Indicates the
eNodeB sharing
mode, which can be
LOFD-001036 /
independent mode,
TDLOFD-001036
RAN sharing with
NO NO NO LOFD-001037 /
common carriers,
TDLOFD-001037
RAN sharing with
LOFD-070206
dedicated carriers,
or hybrid RAN
sharing.

Indicates whether
to enable or disable NO NO NO None
X2 setup by SON.

Indicates the
method of X2 setup
by SON, that is, the
method of
automatically
setting up X2
interfaces. The
value NO NO NO None
X2_OVER_OSS
can be set only for
Huawei eNodeBs,
and the value
X2_OVER_S1 can
be set for eNodeBs
of any vendor.

Indicates whether
to enable
scheduling request
indication (SRI)
adaptation. If this
switch is turned on,
the SRI period
adaptively changes
LBFD-002003 /
based on the SRI NO NO NO
TDLBFD-002003
algorithm. If this
switch is turned off,
the SRI period is
the value of the
SriPeriod parameter
in the
CellStandardQci
MO.
(bearers with a QCI
of 1), GBR services,
and non-GBR
services are
assigned logical
channel groups 0,
1, 2, and 3,
respectively.
If this parameter is
set to
LCG_PROFILE_1,
the control-plane
services and VoIP
services, GBR
services, high-
priority non-GBR
services, and low-
priority non-GBR LBFD-002025 /
services are TDLBFD-002025
NO NO NO
assigned logical LOFD-00101502 /
channel groups 0, TDLOFD-00101502
1, 2, and 3,
respectively. If this
parameter is set to
LCG_PROFILE_2,
the control-plane
services, VoIP
services, high-
priority non-GBR
services, and low-
priority non-GBR
services are
assigned logical
channel groups 0,
1, 2, 3, respectively.
In addition, services
with a QCI of 2 to 4
are also assigned
Indicates whether
to enable or disable
RAN information
management (RIM)
for handovers
within an RNC pool.
An RNC pool can
NO NO NO None
be used for load
balancing between
RNCs. An RNC can
take over a cell that
was controlled by
another RNC in the
pool.
Indicates whether
the eNodeB
simultaneously
sends Uu
messages during
security mode
activation and
reconfiguration. If
LBFD-002007 /
this switch is turned NO NO NO
TDLBFD-002007
on, the eNodeB
simultaneously
sends Uu
messages. If this
switch is turned off,
the eNodeB sends
Uu messages one
by one.
SETUP
RESPONSE, and
ENB
CONFIGURATION
UPDATE.
Turn off the switch if
the eNodeB
configuration data
on a network is to
be modified by
using the
interlocking
modification
function on the
CME and
modifications to the
parameters of a
neighboring
eNodeB will be LOFD-002001 /
NO NO NO
updated on the TDLOFD-002001
local eNodeB
through messages
over the X2
interface. These
parameters include
eNodeBId, CellId,
LocalCellId,
CnOperator,
CnOperatorTa,
CellOp, PhyCellId,
and DlEarfcn. This
prevents the
configuration data
from being lost or
abnormal during the
automatic update.
This switch must be
turned on if the
Indicates whether
to enable the X2
interface self-setup NO NO NO None
function for the
target operator.
Indicates whether
to select transport
network layer (TNL)
parameters based
on the primary
PLMN ID or
selected PLMN ID
that contained in
the SON
configuration
message. This
parameter is used
for X2 self-setup in
RAN sharing
scenarios.
Selecting TNL NO NO NO None
parameters based
on the primary
PLMN ID applies to
X2 self-setup
between eNodeBs
provided by
different suppliers.
For X2 self-setup
between Huawei
eNodeBs, selecting
TNL parameters
based on the
selected PLMN ID
is used in
preference.

Indicates the UMTS

load transmission
channel. The
eNodeB sends
RAN-
INFORMATION-
REQUEST PDUs to
UTRAN cells to
request multiple
reports on the load
NO NO NO None
status of UTRAN
cells only when the
parameter is set to
BASED_ON_RIM.T
he function
specified by the
parameter value
BASED_ON_ECO
is temporarily
unavailable.
data forwarding and
downlink data
forwarding are
separately
determined. The
target eNodeB can
choose to send
both the uplink and
downlink
destination
addresses, not
send the uplink and
downlink
destination
addresses, or send
only the uplink or
downlink
destination address
to the source
NO NO NO None
eNodeB.
If the switch is
turned on, uplink
data forwarding and
downlink data
forwarding are
determined
together. The target
eNodeB can
choose to send
both the uplink and
downlink
destination
addresses, not
send the uplink and
downlink
destination
addresses, or send
only the downlink
eNodeB
compliance with the
same protocols.
After a UE initiates
an RRC connection
reestablishment
procedure due to
reconfigurationFailu
re and the
reestablishment is
complete, the
subsequent RRC
connection
reconfiguration may
fail again. As a
result, the UE
initiates an RRC
connection
reestablishment NO NO NO None
procedure again. If
this repeatedly
happens, the UE
repeatedly initiates
RRC connection
reestablishment. If
this parameter is
set to 0, the
function of RRC
connection
reestablishment
protection is not
used. If this
parameter is set to
a value other than
0, the eNodeB
rejects the RRC
connection
Indicates the time
for which the X2
interface
configuration is
retained on the
local and peer
eNodeBs when the
two eNodeBs do
not have a neighbor
relationship with
each other. If the
local eNodeB
determines that no
neighbor
LOFD-002001 /
relationship is NO NO NO
TDLBFD-002001
configured between
the local and peer
eNodeBs, the local
eNodeB starts the
timer and removes
the X2 interface
configuration after
the timer expires. If
this parameter is
set to 0, the
neighbor
relationship-based
X2 self-removal
function is disabled.

Indicates the
eNodeB coding
scheme for Global
eNodeB ID IE and
Reporting Cell ID IE
in the RIM
message. If the
EPC devices that
exchange RIM
messages with
eNodeBs are NO NO NO None
provided by Huawei
and the peer
devices adopt the
private coding
scheme, set this
parameter to
Private Coding. In
other cases, set this
parameter to
Standard Coding.
Indicates whether
the handover
request message
for a handover from
E-UTRAN to
NO NO NO LOFD-001019
UTRAN or GERAN
contains the UE-
EUTRA-Capability
information element
(IE).
Indicates whether
MMEs of operators
that share the
eNodeB can be
configured with the
same mobility
management entity
code (MMEC). If
this parameter is
set to OFF(Off),
MMEs of operators LOFD-001018 /
NO NO NO
that share the TDLOFD-001018
eNodeB cannot be
configured with the
same MMEC. If this
parameter is set to
ON(On), MMEs of
operators that
share the eNodeB
can be configured
with the same
MMEC.

Indicates whether
to enable the X2
automatic removal
based on a request
from the peer
eNodeB. If this
parameter is set to
ON(On), this
function is enabled.
If this parameter is
set to OFF(Off), this
function is disabled.
When the
NO NO NO None
parameter is set to
ON(On), the local
eNodeB removes
the X2 interface
configuration if the
local eNodeB
receives a RESET
REQUEST
message from the
peer eNodeB and
determines that the
X2 interface is
unavailable.
message contains
the IE Receive
Status Of UL PDCP
SDUs during an S1-
or X2-based
outgoing handover.
When this
parameter is set to
OFF(Off), the SN
STATUS
TRANSFER
message contains
the IE Receive
Status Of UL PDCP
SDUs if the
eNodeB receives
out-of-order uplink
PDCP packets for
bearers in LBFD-002018 /
NO NO NO
acknowledge mode. TDLBFD-002018
When this
parameter is set to
ON(On), the SN
STATUS
TRANSFER
message contains
the IE Receive
Status Of UL PDCP
SDUs if the
following conditions
are met: (1) The
source eNodeB
receives out-of-
order uplink PDCP
packets for bearers
in acknowledge
mode. (2) The
target eNodeB
Measurement
Configuration.
GeranAnrMcOptSwi
tch: This option
controls whether
measurement
configuration
optimization takes
effect when ANR
with GERAN is
enabled. If this
option is LOFD-
deselected, the 001022/TDLOFD-
optimization does 001022
not take effect. That LOFD-
is, when an 001023/TDLOFD-
eNodeB delivers 001023
measurement LOFD-
configuration to NO NO NO 081283/TDLOFD-
UEs to perform CGI 081203
reading for ANR LOFD-
with GERAN, the 001053/TDLOFD-
carrierFreqs IE can 001053
contain multiple LOFD-
GERAN 001020/TDLOFD-
frequencies. If this 001020
option is selected,
the optimization
takes effect, and
the carrierFreqs IE
contains only one
GERAN frequency.
InactDiscardSwitch:
This option
specifies whether to
terminate the
ongoing signaling
neighboring cell
configurations from
neighboring cell
lists (NCLs) and
neighboring relation
tables (NRTs)
based on the ENB
CONFIGURATION
UPDATE message.
If this parameter is
set to ON, this
function is enabled.
If this parameter is
set to OFF, this
function is disabled.
If both the
X2BasedUptENode
BCfgSwitch
parameter and this LOFD-002001 /
NO NO NO
parameter are set TDLOFD-002001
to ON, the eNodeB
removes external
cell and
neighboring cell
configurations from
NCLs and NRTs if
the following
conditions are met:
(1) The ENB
CONFIGURATION
UPDATE message
received over the
X2 interface
contains the IE
"Served Cells To
Delete" (identified
by the IE ID 27); (2)
The No Remove
Indicates the type
of served cells,
which is contained
in protocol-defined
messages
exchanged in X2
Setup and eNB
Configuration
Update procedures.
If this parameter is
set to
NO NO NO None
ACTIVE_CELL(Acti
ve Cell), the serving
cells include all the
activated cells. If
this parameter is
set to
CONFIGURED_CE
LL(Configured Cell),
the serving cells
include all the
configured cells.
Indicates whether
to enable eNodeB-
triggered MME load
rebalancing. When
this parameter is
set to ON(On), the
eNodeB releases
the RRC
connection for a UE
with the cause
value
"loadBalancingTAUr
equired" if the UE
accesses the cell
using an S-TMSI
that is associated
with an overloaded NO NO NO None
MME. This ensures
that the UE can be
routed to a lightly
loaded MME if it
initiates another
access request.
When this
parameter is set to
OFF(Off), the
eNodeB sends an
RRCConnectionRel
ease message with
the cause value
"other" to the UE to
release its RRC
connection.

Indicates after
which times of
resynchronization
failures the UE
release timer is
started in scenarios LBFD-002007 /
NO NO NO
where the RRC TDLBFD-002007
connection is
released for a UE
caused by
resynchronization
failure.
Indicates whether
to perform the radio
link failure (RLF)
detection for a UE
LBFD-002007 /
when the RRC NO NO NO
TDLBFD-002007
connection for the
UE is released
because of UE
inactivity.

Indicates the UE
link fault detection
switch. If this switch
is turned on, link
fault detection is
enabled for LBFD-002007 /
NO NO NO
synchronized UEs. TDLBFD-002007
If this switch is
turned off, link fault
detection is not
enabled for
synchronized UEs.
Indicates the value
of the IE Default
paging DRX
contained in the S1
SETUP REQUEST
and ENB
LBFD-002011 /
CONFIGURATION NO NO NO
TDLBFD-002011
UPDATE messages
that the eNodeB
sends over the S1
interface. For
details, see 3GPP
TS 36.413.

Indicates whether
the
RRCConnectionRe
configuration
message sent from
the source eNodeB
to a UE contains
the power
headroom
configuration during
a handover where
the eNodeB works
as the target
eNodeB. If this
parameter is set to LBFD-002026
NO NO NO
ON(On), the /TDLBFD-002026
RRCConnectionRe
configuration
message must
contain the power
headroom
configuration. If this
parameter is set to
OFF(Off), the power
headroom
configuration is
optional in the
RRCConnectionRe
configuration
message.
RimUtranSwitch(Ri
mUtranSwitch)
option controls
whether to send E-
UTRAN cell load
information through
RAN information
management (RIM)
procedures to the
UTRAN. This option
applies only to LTE
FDD. If the
RimUtranSwitch(Ri
mUtranSwitch)
option is selected,
the eNodeB sends
cell load information
through RIM
LOFD-070203
procedures to the
NO NO NO SEFD-090205
UTRAN and notifies
SEFD-090206
the UTRAN of cell
load changes
through RIM
procedures.
EcoSwitch(EcoSwit
ch): This bit controls
whether to send cell
load information to
the eCoordinator.
This option applies
to both LTE FDD
and LTE TDD. If
EcoSwitch(EcoSwit
ch) is set to on, the
eNodeB sends load
information to the
eCoordinator and
notifies the
Indicates whether
the eNodeB
supports some
protocol-defined
procedures. If
SupportS1UeCapM
atchMsg(SupportS1
UeCapMatchMsg)
is set to ON, the
eNodeB can
process and
respond to the UE
RADIO
CAPABILITY
MATCH REQUEST
message over the
S1 interface. For NO NO NO None
details about the
message, see
3GPP TS 36.413. If
SupportS1UeCapM
atchMsg(SupportS1
UeCapMatchMsg)
is set to OFF, the
eNodeB cannot
process the UE
RADIO
CAPABILITY
MATCH REQUEST
message and
responds with an
error indication
message.
Indicates whether
the eNodeB is
allowed to send a
CellTrafficTrace
message to the
MME over the S1
interface after a cell
tracing task is
started. If this
parameter is set to
ON, the eNodeB
can send the
CellTrafficTrace
message to the
NO NO NO None
MME after the cell
tracing task is
started. If this
parameter is set to
OFF, the eNodeB
does not send the
message in this
scenario. For
details about the
mechanism for
sending the
CellTrafficTrace
message, see
3GPP TS 32.422.

This switch is only

valid when a UMPT
and an LMPT are in
one BBU, with the
UMPT as the main
control board and
the LMPT as the
extended
NO NO NO None
board.The LMPT
can be configured
with a maximum of
18 cells. This switch
should be off if the
eNodeB needs to
be configured more
than 18 cells.
GUMMEIs, rather
than the gummei-
Type IE, to
determine the UE
type. If this option is
selected and a UE
reports the gummei-
Type IE, the
eNodeB uses this
IE to determine the
UE type. If this
option is selected
but a UE does not
report the gummei-
Type IE, the
eNodeB uses the
most significant bits
of MMEGIs
LOFD-001018 /
contained in NO NO NO
TLOFD-001018
GUMMEIs to
determine the UE
type. If a UE reports
the gummei-Type IE
and the relevant
MME complies with
3GPP Release 10
or later, the eNodeB
includes the
gummei-Type IE in
the S1 message
INITIAL UE
MESSAGE.
NNSFENHANCEM
ENTSWITCH:
specifies whether to
enable enhanced
NAS node selection

This parameter
Indicates whether
to enable software
commissioning over
the S1 interface. If
all S1 links are
unavailable in the
initial engineering
stage, this
parameter enables NO NO NO None
cells to be activated
for cell signal
coverage tests. It is
recommended that
this parameter be
used only in the
engineering
commissioning
stage.
DrxConfigMsgSwitc
h: This option
controls whether
the eNodeB
includes the DRX-
Config IE in the
RRC Connection
Setup message.
The messages
contain this IE only
if this option is
selected.
HARQ-Multiplexing-
LAOFD-00100101
Table: This option
LAOFD-00100102
specifies the type of
LAOFD-00100201 /
the HARQ
TDLAOFD-001002
multiplexing table
LAOFD-00100202 /
used by a UE. If
TDLAOFD-
this option is
NO NO NO 00100202
selected, the UE
LAOFD-070201 /
sends HARQ
TDLAOFD-070201
feedback in
LAOFD-070202
multiplexing mode
TDLAOFD-
according to HARQ-
00100111
ACK Multiplexing
TDLBFD-002003
Tables 10.1.3-2,
10.1.3-3, and
10.1.3-4 in 3GPP
TS 36.213. This
option applies only
to LTE TDD.
SCellModCaMeasR
mvSwitch: This
option specifies
whether to delete or
change the A2 and
A6 measurement
configuration for
Indicates the
triggering type for
establishing an
SCTP link for an X2
interface. If this
parameter is set to
BASED_TNL, the
establishment can
be triggered based
on transport
resources. When
the CP bearer is
subscribed, the
eNodeB initiates
the establishment
of an SCTP link
with the peer NO NO NO None
eNodeB. If this
parameter is set to
BASED_X2INTERF
ACE, the SCTP
establishment can
be triggered based
on the X2 interface.
When the
conditions for
setting up an X2
interface are met,
the eNodeB
initiates the
establishment of an
SCTP link with the
peer eNodeB.
BASED_ON_X2FA
ULT(Based on X2
Fault): If this option
is selected, X2
automatic removal
based on X2 fault is
enabled.
BASED_ON_X2US
AGE_WITH_NEGO
(Based on X2
Usage with
Negotiation): If this
option is selected,
X2 automatic
removal based on
X2 usage is
enabled and the
removal requires
LOFD-002001 /
the negotiation NO NO NO
TDLOFD-002001
between the local
and peer eNodeBs.
This option applies
to scenarios where
the X2 interface is
normal and the
peer eNodeB is a
Huawei eNodeB.
BASED_ON_X2US
AGE_WITHOUT_N
EGO: If this option
is selected, X2
automatic removal
based on X2 usage
is enabled and the
removal does not
require the
negotiation
Indicates the length
of the timer for
automatically
removing X2
interfaces based on
X2 fault. If an X2
LOFD-002001 /
interface is faulty NO NO NO
TDLOFD-002001
throughout the time
specified by this
timer, the eNodeB
automatically
removes the X2
interface.
Indicates the length
of the timer for
automatically
removing X2
interfaces based on
X2 usage. If the
number of
handovers from a
peer eNodeB to a
local eNodeB within
the time specified
by this timer is less
than or equal to the
X2SonDeleteHoInN
umThd parameter
value and the LOFD-002001 /
NO NO NO
number of TDLOFD-002001
handovers from the
local eNodeB to the
peer eNodeB within
the time specified
by this timer is also
less than or equal
to the
X2SonDeleteHoOut
NumThd parameter
value, the local
eNodeB
automatically
removes the X2
interface between
the eNodeBs.
Indicates the
threshold of the
number of incoming
handovers for
automatically
removing X2
interfaces based on
X2 usage. If the
number of
handovers from a
peer eNodeB to a
local eNodeB within
the time specified
by the
X2SonDeleteTimerf
orX2Usage
parameter is less
than this parameter
LOFD-002001 /
value and the NO NO NO
TDLOFD-002001
number of
handovers from the
local eNodeB to the
peer eNodeB within
the time specified
by the
X2SonDeleteTimerf
orX2Usage
parameter is also
less than the
X2SonDeleteHoOut
NumThd parameter
value, the local
eNodeB
automatically
removes the X2
interface between
the eNodeBs.
Indicates the
threshold of the
number of outgoing
handovers for
automatically
removing X2
interfaces based on
X2 usage. If the
number of
handovers from a
local eNodeB to a
peer eNodeB within
the time specified
by the
X2SonDeleteTimerf
orX2Usage
parameter is less
than this parameter
LOFD-002001 /
value and the NO NO NO
TDLOFD-002001
number of
handovers from the
peer eNodeB to the
local eNodeB within
the time specified
by the
X2SonDeleteTimerf
orX2Usage
parameter is also
less than the
X2SonDeleteHoInN
umThd parameter
value, the local
eNodeB
automatically
removes the X2
interface between
the eNodeBs.
periodic inter-
frequency/RAT
measurements in
cell tracing. If a UE
enters the
measurement gap
and then VoIP
services are
initiated for this UE,
fast ANR, active
PCI conflict
detection, GSM and
LTE buffer zone
optimization, or
periodic inter-
frequency/RAT LOFD-002001 /
measurements in TDLOFD-002001
cell tracing can LOFD-002002 /
trigger the UE's NO NO NO TDLOFD-002002
exiting from the LOFD-002007 /
gap. TDLOFD-002007
If this parameter is MRFD-231808
set to ENBALE,
VoIP UEs are
allowed to enter the
periodic
measurement gap
during GSM and
LTE buffer zone
optimization and
periodic inter-
frequency/RAT
measurement in cell
tracing. The
parameter setting
does not affect the
entering of the gap
Indicates whether
to optimized the
statistics method of
counters related to
the number of
active UEs in intra-
eNodeB handover
scenarios. If this
switch is on, the
number of active
UEs in the source NO NO NO None
cell are not counted
after the handover
data transfer
completes. If this
switch is off, the
eNodeB measures
the number of
active UEs after the
handover data
transfer completes.
Indicates the
maximum number
of synchronized
UEs supported by a
baseband
processing unit
(BBP). This
parameter currently
applies only to
LBBPd boards in
LTE FDD eNodeBs.
If the
PucchPeriodicCqiO
ptSwitch parameter NO NO NO None
is set to OFF or at
least one cell
established in the
LBBPd is
configured with
extended cyclic
prefix (CP), the
parameter value
MAX_SYNC_USER
_1200 takes effect
irrespective of the
actual parameter
setting.
TimetoWait IE to
inform the peer
eNodeB the time to
wait for sending an
X2 setup request
again. As defined in
3GPP TS 36.423,
the peer eNodeB
shall wait at least
for the time
indicated by the
TimetoWait IE
before reinitiating
the X2 Setup
procedure towards
the same eNodeB.
If this parameter is
set to
TIMETOWAIT_NOT
NO NO NO None
CARRY, the X2
Setup Failure
message does not
contain the
TimetoWait IE. The
values
TIMETOWAIT_1s,
TIMETOWAIT_2s,
TIMETOWAIT_5s,
TIMETOWAIT_10s,
TIMETOWAIT_20s,
and
TIMETOWAIT_60s
indicate that the
waiting time are 1s,
2s, 5s, 10s, 20s,
and 60s,
respectively.
Assume that the
Indicates the
threshold of the
number of X2 setup
failures. If the
number of X2 setup
failures reaches this
threshold within a
period specified by
the
X2SetupFailureNu
mTimer, the
eNodeB that NO NO NO None
initiates the X2
setup no longer
sends any X2 setup
request within the
period. If this
parameter is set to
0, the number of X2
setup failures is not
measured and the
X2 setup request is
not prohibited.
Indicates the length
of a period for
measuring the
number of X2 setup
failures. If the
number of X2 setup
failures reaches the
value of the
X2SetupFailureNu
NO NO NO None
mThd parameter
within a
measurement
period, the eNodeB
that initiates the X2
setup no longer
sends any X2 setup
request within the
period.
Indicates whether
to enable eX2
automatic removal.
If
BASED_ON_EX2F
AULT(Based on
EX2 Fault) is
selected, eX2
automatic removal
NO NO NO None
based on eX2 fault
is enabled. If
BASED_ON_EX2F
AULT(Based on
EX2 Fault) is
deselected, eX2
automatic removal
based on eX2 fault
is disabled.

Indicates the length

of the timer for
automatically
removing eX2
interfaces based on
eX2 fault. If an eX2
interface is faulty NO NO NO None
throughout the time
specified by this
timer, the eNodeB
automatically
removes the eX2
interface.
All free mode), all
enabled X2
automatic removal
functions work in
free mode. In this
mode, the eNodeB
directly removes the
X2 interfaces that
are determined to
be removed. If this
parameter is set to
HUAWEI_FREE_O
THER_CONTROLL
ED(HW free other
controlled), some
functions work in
controlled mode.
These functions
LOFD-002004 /
refer to those NO NO NO
TDLOFD-002004
controlled by the
PeerReqBasedX2D
elSwitch parameter,
and
BASED_ON_X2FA
ULT(Based on X2
Fault) and
BASED_ON_X2US
AGE_WITHOUT_N
EGO(Based on X2
Usage Without
Negotiation) of the
X2SonDeleteSwitch
parameter. In this
mode, the X2
interfaces that need
to be removed are
reported to the
Indicates the
threshold for
triggering X2 self-
setup. If the number
of times an X2
interface needs to
be set up between
the local eNodeB
and a peer eNodeB
LOFD-002004 /
is greater than or NO NO NO
TDLOFD-002004
equal to this
threshold within the
period specified by
the
X2SonSetupTimer
parameter, the X2
interface self-setup
is triggered on the
local eNodeB.
Indicates the length
of the timer for the
local eNodeB
measuring the
number of times an
X2 interface needs
to be automatically
set up. If the
number of times an
X2 interface needs
to be set up
between the local
eNodeB and a peer LOFD-002004 /
NO NO NO
eNodeB is greater TDLOFD-002004
than or equal to the
threshold specified
by the
X2SonSetupNumTh
d parameter within
a period specified
by the
X2SonSetupTimer
parameter, the X2
interface self-setup
is triggered on the
local eNodeB.
Indicates whether
an eNodeB
proactively
reconfigures the
access stratum
(AS) security key
after an X2-based
handover. If this
parameter is set to
OFF(Off), the target
eNodeB uses the
AS security key
received from the
source eNodeB
after the X2-based LOFD-001010 /
NO NO NO
handover. If this TDLOFD-001010
parameter is set to
ON(On), the target
eNodeB calculates
an AS security key
based on the key
received from the
MME after the X2-
based handover
and delivers the
RRCConnectionRe
configuration
message to the UE
to reconfigure the
AS security key.
updates
neighboring cell
configuration based
on the messages
received over the
X2 interface. The
messages include
X2 SETUP
REQUEST, X2
SETUP
RESPONSE, and
ENB
CONFIGURATION
UPDATE. This
parameter provides
the following option:
FreqAddCtrl(FreqA
ddCtrl): This option
controls whether NO NO NO None
the eNodeB adds
neighboring E-
UTRAN frequencies
based on
messages received
over the X2
interface. If this
option is selected,
the eNodeB directly
adds frequencies. If
this option is
deselected, the
eNodeB does not
add any
frequencies when
the PLMN in the
operator
information and the

Indicates the
method of obtaining
the domain name of
an MME for S1-
MME self-setup. If
this parameter is
LOFD-
set to Auto, the
NO NO NO 002004/TDLOFD-
eNodeB constructs
002004
the domain name
based on a TAI. If
this parameter is
set to Customized,
the domain name is
user-defined.
Indicates the
threshold for an
RRC connection
penalty. Certain
UEs may
repeatedly fail to
access networks
because of
compatibility issues.
If the number of
RRC connection
setup requests that
the eNodeB
receives from a UE
within the time LBFD-002007 /
NO NO NO
specified by TDLBFD-002007
T300+FilterReptRrc
ConnReqTimer
exceeds the
threshold (a non-
zero value), the
eNodeB imposes a
penalty on the UE,
rejecting RRC
connection setup
requests from the
UE. If this
parameter is set to
0, the penalty does
not take effect.
deletes neighboring
cell and external
cell configurations
based on received
X2 messages only
if this option is
selected.
ADD_FREQ_CFG_
SW: If this option is
selected, the
eNodeB
automatically adds
new EARFCNs
brought by new or
updated
neighboring cells to
the inter-frequency
EARFCN list of the
local cell based on LOFD-002001 /
NO NO NO
the messages TDLOFD-002001
received over the
X2 interface. If this
option is
deselected, the
eNodeB does not
automatically add
new EARFCNs to
the inter-frequency
EARFCN list of the
local cell based on
messages received
over the X2
interface. In
addition, the
eNodeB does not
add the cells with
new EARFCNs to
the NCL and it
Indicates whether
to control the
handover process.
This parameter
provides the
following option:
HoDataSendCtrlSwi
tch(HoDataSendCtrl
Switch): If this
option is selected,
the eNodeB sends
data packets to a
handover-incoming
UE after sending a
NO NO NO None
random access
response (RAR) in
a non-contention-
based random
access procedure.
If this option is
deselected, the
eNodeB sends data
packets to the UE
after receiving an
Msg3 message in
the non-contention-
based random
access procedure.
reestablishment in
enhanced
scenarios. This
parameter provides
the following
options:
PCI_CONFUSION_
REEST_SWITCH(P
CI_CONFUSION_R
EEST_SWITCH):
controls whether
the eNodeB
supports RRC
connection
reestablishment in
PCI confusion
scenarios. The
eNodeB supports
reestablishment in NO NO NO None
scenarios where
PCIs of neighboring
cells are the same
only if this option is
selected.
S1_HANDOVER_R
EEST_SWITCH(S1
Handover
Reestablishment
Switch): controls
whether the
eNodeB supports
RRC connection
reestablishment in
S1-based
handovers. The
eNodeB supports
reestablishment in
Indicates whether
to enable S1-MME
self-configuration.
This parameter
provides the
following option:
S1MMESonSetupS
witch(S1MMESonS
etupSwitch): S1- LOFD-
MME self-setup is NO NO NO 002004/TDLOFD-
enabled only if this 002004
option is selected.
S1MMESonDeleteS
witch(S1MMESonD
eleteSwitch): S1-
MME self-removal
is enabled only if
this option is
selected.
Indicates whether
to use a private
mechanism for
management-based
MDT data
collection. If this
parameter is set to
ON, the eNodeB
does not use
NO NO NO None
authentication
information to
select UEs. If this
parameter is set to
OFF, the eNodeB
selects UEs in
accordance with
3GPP
specifications.

Indicates whether
to perform
parameter check
when the QCI value
is updated. If this
parameter is set to
TDLBFD-002008
ON, the function of NO NO NO
LBFD-002008
checking QCI-
related parameters
is enabled. If this
parameter is set to
OFF, this function is
disabled.
to enable the
optimization of UE
incompatibility risks
in ultra-flash CSFB.
If this option is
selected, an
eNodeB triggers an
ultra-flash CSFB
procedure based on
the private IE
"SRVCC based
eCSFB operation
possible" that the
MME sends to the
eNodeB. If this
option is
deselected, the
eNodeB does not
trigger an ultra-flash
NO NO NO None
CSFB procedure
based on this IE.
ForbidR8R9UeAcce
ssB41Sw(ForbidR8
R9UeAccessB41Sw
): Indicates whether
to forbid UEs
compliant with
3GPP Release 8
and Release 9 to
access a cell that
works at a
frequency ranging
from 2575 MHz to
2595 MHz within
band 41. If this
option is selected,
all the UEs are
forbidden to access
Indicates the switch
to control the
Huawei-proprietary
functions related to
the S1
interface.UeTypeRe
cogSwitch: This
option controls
whether to allow the
eNodeB to obtain
the IMEISV
information of UEs
from the MME. An
eNodeB applies for
the IMEISV
information
NO NO NO LBFD-081103
delivered from the
MME only if this
option is selected.
For details about
the definition of
IMEISV, see section
6.2.2 in 3GPP TS
23.003.As defined
in section 9.2.3.38
in 3GPP TS 36.413
V12.2.0, the last 4
digits of the SNR in
the IMEISV are
masked by setting
the corresponding
bits to F.
timer expires, the
S1 interface status
does not change.
After the timer
expires, the S1
interface status
does not change if
the SCTP link is
normal and
changes to faulty if
the SCTP link is
faulty. In the
preceding scenario,
if this option is
deselected, the S1
interface status
immediately
changes after the
eNodeB receives LOFD-001018 /
NO NO NO
an ABORT TDLOFD-001018
message from the
MME.
OTHER_S1_SCTP
_ABORT_SMOOTH
_SW(Other S1
SCTP Abort
Smooth Sw): For an
S1 interface that
connects an
eNodeB and a non-
Huawei MME, if this
option is selected,
the eNodeB starts a
smooth timer when
the eNodeB
receives an ABORT
message from the
MME. Before the
parameter applies
only to LTE FDD.
The setting of this
parameter is valid
only if all the
following conditions
are met (otherwise,
the maximum
number is always
1200). 1. The cell is
established on a
UBBPd5, UBBPd6,
or UBBPda board
and is served by an
LTE FDD eNodeB.
2. The
PucchPeriodicCqiO
ptSwitch parameter
is set to ON(On) for
NO NO NO None
the serving
eNodeB. 3. The cell
is configured with
normal CPs, the cell
bandwidth is 10
MHz or larger, and
the cell is a low-
speed and non-
SFN cell. 4. The cell
is an intra-BBP cell.
5. The CPU that
serves the cell does
not serve any SFN
cells.
MAX_USER_1200
and
MAX_USER_1800
indicate that a
maximum of 1200
Indicates whether
to enable CSFB
procedure
optimization. This
parameter provides
the following option:
UTRAN_CSFB_FR
EQ_CHOOSE_OPT
_SW: This option LOFD-
specifies whether to 001033/TDLOFD-
optimize target 001033
frequency selection LOFD-
for CSFB to UTRAN NO NO NO 001052/TDLOFD-
if there are several 001052
target frequencies LOFD-
with the same 070202/TDLOFD-
priority. If this option 081223
is selected, a UE
selects the target
frequency
randomly. If this
option is
deselected, this
optimization
function is disabled.

Indicates whether
the eNodeB reports
the PRS Muting
Configuration IE
when the eNodeB
does not support
the PRS Muting
function. If this
parameter is set to
ON(On), the
eNodeB reports the
PRS Muting
Configuration IE
LOFD-
and the IE value is
NO NO NO 001047/TDLOFD-
in the format of BIT
001047
STRING (4) with all
bits set to 1. If this
parameter is set to
OFF(Off), the
eNodeB does not
report the PRS
Muting
Configuration IE.
For details about
the PRS Muting
Configuration IE,
see 3GPP TS
36.455.
Indicates whether
to enable
measurement to
collect data related
to RRC connection
setup requests.
RrcConnPunishStat
Switch: If this option
is selected, the
L.RRC.ConnReq.M
sg counter is
incremented only
by 1 when a UE
repeatedly sends
an RRC connection
setup request,
NO NO NO None
which triggers the
punishment
mechanism. If this
option is
deselected, the
L.RRC.ConnReq.M
sg counter is
incremented by the
actual number of
times a UE
repeatedly sends
an RRC connection
setup request. This
parameter applies
only to LTE TDD
networks.

LOFD-001036 /
TDLOFD-001036
Indicates the index
YES YES NO LOFD-001037 /
of the operator.
TDLOFD-001037
LOFD-070206
Indicates the
proportion of the
number of UEs in
RRC_CONNECTE
D mode of the LOFD-001036 /
operator when the TDLOFD-001036
eNodeB is shared NO YES NO LOFD-001037 /
among operators. TDLOFD-001037
This parameter LOFD-070206
must be set based
on the contract
signed with
operators.

Indicates the
proportion of users
that the operator
can share with
LOFD-001113
other operators
TDLBFD-004014
when the eNodeB
LOFD-001036 /
is shared among
NO NO NO TDLOFD-001036
operators. This
LOFD-001037 /
parameter must be
TDLOFD-001037
set based on the
LOFD-070206
contract signed with
operators. This
parameter applies
only to LTE FDD.

Indicates the ID of a
Multimedia
Broadcast Single
Frequency Network NO NO YES None
(MBSFN) area to
which a cell
belongs.
Indicates the
synchronization
NO NO NO LOFD-070220
period of the SYNC
protocol.
Indicates whether
the cell is a
reserved cell for
Multimedia NO NO YES None
Broadcast Multicast
Service (MBMS)
services.
This parameter
indicates the local
ID of the cell. It
NO NO YES None
uniquely identifies a
cell within an
eNodeB.
Indicates the
switches to control
eNodeB-level
MBMS services.
This parameter
includes the
following option:
LOFD-070220 /
SessionForMultiMA NO NO NO
TDLOFD-070220
Switch: A single
MBMS session can
be broadcasted in
multiple MBSFN
areas in an eNodeB
only if this option is
selected.

Indicates the ID of a
mobility load
balancing (MLB)
parameter group for
YES YES NO TDLOFD-001032
a QCI. This
parameter is valid
only for LTE TDD
cells.

Indicates the uplink

minimum
guaranteed bit rate.
NO NO NO TDLOFD-001032
This parameter is
valid only for LTE
TDD cells.

Indicates the
downlink minimum
guaranteed bit rate.
NO NO NO TDLOFD-001032
This parameter is
valid only for LTE
TDD cells.
Indicates the index LOFD-
of the MME domain YES YES NO 002004/TDLOFD-
name. 002004

LOFD-
Indicates the ID of
NO YES NO 002004/TDLOFD-
the operator.
002004

Indicates the
domain name of an
MME or an MME
pool. If MMEs are
configured as an LOFD-
MME pool, you are NO YES NO 002004/TDLOFD-
advised to specify 002004
the domain name of
the MME pool to
simplify the
configuration.

Indicates the
minimum length of
NO NO NO None
the S1 re-
establishment timer.

Indicates the
maximum length of
NO NO NO None
the S1 re-
establishment timer.

Indicates the ID of
YES YES NO None
the operator.
Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 10 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 11 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 12 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 13 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 14 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 15 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 16 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 17 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 18 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 19 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 20 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 21 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the
number of a
specific call history
record (CHR) YES YES NO None
hierarchical
classification output
mode.

Indicates the call

history record
(CHR) generating
cause value
NO YES NO None
corresponding to a
specific CHR
hierarchical
classification mode.
Indicates the call
history record
(CHR) hierarchical
output mode. If the
parameter is set to
Level_1_Output,
level-1 CHRs, that
is, only typical
records, are
outputted. If the
parameter is set to
Level_2_Output,
NO YES NO None
level-2 CHRs, that
is, all records, are
outputted. If level-2
CHRs are started to
be outputted, the
number of
outputted records
increases, thereby
decreasing the
duration that the
local logs can be
recorded.

Indicates whether
CHRs are outputted
after being
sampled. If this
parameter is set to
SamplingEnable,
specific CHRs are
outputted after
being sampled. If
this parameter is
set to
SamplingUnable,
the specific CHRs
are all outputted NO YES NO None
without being
sampled. If the
value of this
parameter is
changed from
SamplingEnable to
SamplingUnable,
the amount of
records increases,
thereby decreasing
the duration that the
local logs can be
recorded.

Indicates the ID of
YES YES NO None
the ECO MO.
Indicates whether
to configure the
control-plane end
point group, user-
NO NO NO None
plane end point
group, or both end
point groups for the
ECO MO.

Indicates the ID of
the control-plane
end point group NO YES NO None
used by the ECO
MO.

Indicates the ID of
the user-plane end
NO YES NO None
point group used by
the ECO MO.

Indicates the
descriptions of the NO NO NO None
ECO MO.

Indicates the ID of
the control port
NO NO YES None
(CP) bearer for the
ECO interface.
Indicates the status
of the control port
NO NO YES None
(CP) bearer for the
ECO interface.

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
Indicates the ID of TDLBFD-00300102
YES YES NO
the IP path. LBFD-00300103 /
TDLBFD-00300103
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
Indicates the
TDLBFD-00300102
application type of NO YES NO
LBFD-00300103 /
the IP path.
TDLBFD-00300103
LOFD-001018 /
TDLOFD-001018
Indicates the S1 LBFD-00300101 /
interface ID of the TDLBFD-00300101
IP path. This LBFD-00300102 /
parameter is TDLBFD-00300102
NO YES NO
unavilable in this LBFD-00300103 /
version, it is TDLBFD-00300103
recommended to be LOFD-001018 /
set as 0. TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
Indicates the X2
TDLBFD-00300102
interface ID of the NO YES NO
LBFD-00300103 /
IP path.
TDLBFD-00300103
LOFD-001018 /
TDLOFD-001018

Indicates the M1
YES YES NO LOFD-070220
object ID.

Indicates the ID of
the end point group
NO YES NO LOFD-070220
used by the M1
MO.

Indicates the user-

NO NO NO None
defined information.

Indicates the M2
YES YES NO LOFD-070220
object ID.

Indicates the ID of
the end point group
NO YES NO LOFD-070220
used by the M2
MO.

Indicates the user-

NO NO NO None
defined information.

Indicates the
control port (CP)
NO NO YES None
bearer ID of the M2
interface.
Indicates the
control port bearer
NO NO YES None
status of the M2
interface.

Indicates the M2
NO NO YES None
interface status.

Indicates the
number of sessions NO NO YES None
on the M2 interface.

Indicates the name

of the Multi-
cell/multicast
Coordination Entity
NO NO YES None
(MCE) to which the
eNodeB is
connected over the
M2 interface.

Indicates the global

unique ID of the
Multi-cell/multicast
Coordination Entity
(MCE) connected to
the eNodeB
through the M2
interface. The
global unique ID of NO NO YES None
the MCE is
represented as
"MCC-MNC-MCE
ID". MCC is short
for mobile country
code and MNC is
short for mobile
network code.

Indicates the fault

reason of the M2 NO NO YES None
link.
Indicates the
temporary mobile
group identities
(TMGIs) of all NO NO YES None
incoming sessions
over the M2
interface.

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
Indicates the S1 TDLBFD-00300102
YES YES NO
object ID. LBFD-00300103 /
TDLBFD-00300103
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
Indicates the ID of
TDLBFD-00300102
the operator that NO YES NO
LBFD-00300103 /
owns the S1 object.
TDLBFD-00300103
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
Indicates the ID of
LBFD-00300102 /
the control-plane
TDLBFD-00300102
end point group NO YES NO
LBFD-00300103 /
used by the S1
TDLBFD-00300103
object.
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
Indicates the ID of LBFD-00300102 /
the user-plane end TDLBFD-00300102
NO YES NO
point group used by LBFD-00300103 /
the S1 object. TDLBFD-00300103
LOFD-001018 /
TDLOFD-001018

Indicates the
LBFD-00300101 /
compliance protocol
TDLBFD-00300101
release of the
LBFD-00300102 /
MMEs to which the
TDLBFD-00300102
eNodeB is NO NO NO
LBFD-00300103 /
connected through
TDLBFD-00300103
the S1 interfaces
LBFD-001008 /
under this S1
TDLBFD-070111
object.
 LBFD-00300101 /
TDLBFD-00300101
Indicates the
LBFD-00300102 /
description of the NO NO NO
TDLBFD-00300102
S1 object.
LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
TDLBFD-00300101
Indicates whether
LBFD-00300102 /
to configure the
TDLBFD-00300102
control-plane or NO NO NO
LBFD-00300103 /
user-plane end
TDLBFD-00300103
point group.
LOFD-001018 /
TDLOFD-001018

Indicates the
priority of an MME
to which the
eNodeB is
connected through LBFD-00300101 /
the S1 interface. A TDLBFD-00300101
large parameter LBFD-00300102 /
value indicates a TDLBFD-00300102
NO NO NO
high priority. After LBFD-00300103 /
this parameter is TDLBFD-00300103
set for MMEs, the LOFD-001018 /
eNodeB can select TDLOFD-001018
a high-priority MME
for UEs attempting
to access the
network.

Indicates the ID of a
carrier-sharing
operator group that
shares the S1 MO.
If the eNodeB
works in hybrid
RAN sharing mode,
set this parameter
to a value within the
range from 1 to 5. If
the eNodeB works NO NO NO LOFD-070206
in independent
mode, RAN sharing
with common
carriers mode, or
RAN sharing with
dedicated carriers
mode, retain the
default value 255,
which is an invalid
value.
Indicates whether
the MME at the
other end of the S1
interface supports
Huawei-proprietary
positioning
procedures, which
are included in
minimization of
drive tests (MDT).
The value
DISABLE(disable)
indicates that the
MME does not
support the
procedures and
therefore the
eNodeB cannot NO NO NO None
obtain UE location
information from the
MME through the
procedures. The
value
ENABLE(enable)
indicates the
opposite. For an S1
interface that is
automatically set
up, the MdtEnable
parameter value in
the MmefeatureCfg
MO is obtained
from the MdtEnable
parameter in the S1
MO.

Indicates the S1
NO NO YES None
interface ID.

Indicates the status

NO NO YES None
of the S1 interface.

Indicates whether
the S1 interface is
blocked. An S1
interface is blocked
after the execution
of BLK NO NO YES None
S1INTERFACE and
is unblocked after
the execution of
UBL
S1INTERFACE.
Indicates the ID of
the control port
NO NO YES None
bearer for the S1
interface.
Indicates the status
of the control port
NO NO YES None
(CP) bearer for the
S1 interface.

Indicates the S1
interface ID. If the
S1 interface is set
up based on the
end point
LBFD-00300101 /
configuration mode,
TDLBFD-00300101
the value range is
LBFD-00300102 /
40000 to 65534. If
TDLBFD-00300102
the S1 interface is YES YES NO
LBFD-00300103 /
set up based on the
TDLBFD-00300103
link configuration
LOFD-001018 /
mode using the
TDLOFD-001018
CME or MML
commands, the
recommended
value range is 0 to
39999.

LBFD-00300101 /
TDLBFD-00300101
Indicates the ID of LBFD-00300102 /
the control port TDLBFD-00300102
NO YES NO
bearer for the S1 LBFD-00300103 /
interface. TDLBFD-00300103
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 /
Indicates the ID of
TDLBFD-00300102
the operator that
NO YES NO LBFD-00300103 /
owns the S1
TDLBFD-00300103
interface.
LOFD-001018 /
TDLOFD-001018
LOFD-070206
Indicates the
compliance protocol
release of the MME
to which the
eNodeB is
connected through
the S1 interface.
The eNodeB sends
S1 messages
complying with the
LBFD-00300101 /
protocol release
TDLBFD-00300101
specified by this
LBFD-00300102 /
parameter. The
TDLBFD-00300102
value of this NO NO NO
LBFD-00300103 /
parameter must be
TDLBFD-00300103
the same as the
LBFD-001008 /
MME-complied
TDLBFD-070111
protocol release. If
the parameter value
is different from the
MME-complied
protocol release,
the way in which
the MME handles
these message is
subject to the MME
implementation.

Indicates whether
the S1 interface is
LBFD-00300101 /
blocked. An S1
TDLBFD-00300101
interface is blocked
LBFD-00300102 /
after the execution
TDLBFD-00300102
of BLK NO NO NO
LBFD-00300103 /
S1INTERFACE and
TDLBFD-00300103
is unblocked after
LOFD-001018 /
the execution of
TDLOFD-001018
UBL
S1INTERFACE.
control mode of the
S1 interface, which
determines the
control policies of
operators and the
SON functions on
the S1 interface.
This parameter is
set by the system
and cannot be
modified by users.
If the S1 interface is
set up by operators
by using the CME
or MML commands,
this parameter is
set to LBFD-00300101 /
MANUAL_MODE TDLBFD-00300101
and operators can LBFD-00300102 /
NO NO NO
configure the S1 TDLBFD-00300102
interface. If the S1 LBFD-00300103 /
interface is set up TDLBFD-00300103
automatically based
on the end point
configuration mode,
this parameter is
set to
AUTO_MODE and
operators can reset,
block, and unblock
the S1 interface
and query the
information of the
S1 interface, but
cannot modify the
configuration of the
S1 interface or
delete the S1
Indicates whether
the S1 interface
was created
automatically or
manually. This
parameter is set by
the system and
cannot be modified
by users. The
LBFD-00300101 /
system sets this
TDLBFD-00300101
parameter to
LBFD-00300102 /
AUTO_CREATE NO NO NO
TDLBFD-00300102
when the S1
LBFD-00300103 /
interface is created
TDLBFD-00300103
automatically using
SON and to
MANUAL_CREATE
when the S1
interface is created
manually by using
the CME or running
an MML
commands.
Indicates the
priority of an MME
to which the
eNodeB is
connected through LBFD-00300101 /
the S1 interface. A TDLBFD-00300101
large parameter LBFD-00300102 /
value indicates a TDLBFD-00300102
NO NO NO
high priority. After LBFD-00300103 /
this parameter is TDLBFD-00300103
set for MMEs, the LOFD-001018 /
eNodeB can select TDLOFD-001018
a high-priority MME
for UEs attempting
to access the
network.

Indicates the ID of a
carrier-sharing
operator group that
shares the
S1Interface MO. If
the eNodeB works
in hybrid RAN
sharing mode, set
this parameter to a
value within the
range from 1 to 5. If
NO NO NO LOFD-070206
the eNodeB works
in independent
mode, RAN sharing
with common
carriers mode, or
RAN sharing with
dedicated carriers
mode, retain the
default value 255,
which is an invalid
value.

Indicates the status

NO NO YES None
of the S1 interface.

Indicates the status

of the control port
NO NO YES None
bearer for the S1
interface.
Indicates whether
the MME connected
to the eNodeB over
the S1 interface is
overloaded. This
parameter is valid
after the S1
interface is
established. Before
NO NO YES None
the S1 interface is
established, the
MME load status is
NULL. For details
about the MME
load status after the
S1 interface is
established, see
3GPP TS 36.413.

Indicates the
number of users
NO NO YES None
that have accessed
the S1 interface.

Indicates the name

of the MME to
which the eNodeB
is connected
through the S1
interface. This
parameter is valid
after the S1
interface is
established and the
MME name is
contained in the S1 NO NO YES None
interface
establishing
response message
or the MME
configuration
update message. In
other conditions,
the parameter value
is NULL. For
details, see 3GPP
TS 36.413.

Indicates the IDs of

all served PLMNs of
the MME to which
the eNodeB is
connected. The ID
NO NO YES None
of a served PLMN
consists of the MCC
and MNC. PLMN
IDs are separated
by commas (,).
Indicates the Global
Unique MME
Identifiers
(GUMMEIs) of all
MME to which the
eNodeB is
connected. A
GUMMEI of a NO NO NO None
serving MME
consists of the
MCC, MNC, MME
group ID, and MME
code. GUMMEIs
are separated by
commas (,).

Indicates the
capacity of the
connected MME
relative to that of
other MMEs. A NO NO YES None
larger value of this
parameter indicates
a larger capacity
allowing UE access.

Indicates the
reason of the fault NO NO YES None
on the S1 link.

Indicates the ID of
YES YES NO None
the SO MO.
Indicates whether
to configure the
control-plane end
point group, user-
NO NO NO None
plane end point
group, or both end
point groups for the
SO MO.
Indicates the ID of
the control-plane
end point group NO YES NO None
used by the SO
MO.
Indicates the ID of
the user-plane end
NO YES NO None
point group used by
the SO MO.

Indicates the
description of the NO NO NO None
SO MO.

Indicates the ID of
the control port
NO NO YES None
(CP) bearer for the
SO interface.

Indicates the status

of the CP bearer for NO NO YES None
the SO interface.

Indicates the index

of a rule for the
YES YES NO None
debugging
message.
Indicates the
configuration type
for the rule. The
rule may take effect
on all UEs, UEs
with the specified
TAC, or UEs with
the specified TAC NO NO NO None
and SVN. Do not
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.
Indicates the type
allocation code
(TAC) in the
IMEISVs of UEs.
Each TAC identifies
a UE model. For
details about
IMEISVs, see
section 6.2.2 in
NO NO NO None
3GPP TS 23.003
V10.1.0 or later
releases. Do not
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
software version
number (SVN) in
the IMEISVs of
UEs. Each SVN
identifies a software
version of UEs. For
details about
IMEISVs, see
section 6.2.2 in NO NO NO None
3GPP TS 23.003
V10.1.0 or later
releases. Do not
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the user-

defined description NO NO NO None
of the UE type.

Indicates the
interface protocol
type of the
debugging
message. Do not
change the setting NO YES NO None
of this parameter
without the
guidance from
Huawei Customer
Service Center.
Indicates the
number of the
message
transmitted over
3GPP-specific
interfaces. Do not
NO YES NO None
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
operation
performed by the
eNodeB on a
matched message.
Do not change the NO YES NO None
setting of this
parameter without
the guidance from
Huawei Customer
Service Center.
message. Each
matching item
contains the
matching offset,
matching length,
and matching
content. The value
ZERO indicates
that the eNodeB
discards or modifies
the messages with
a specific ID. The
value ONE
indicates that the
eNodeB discards or
modifies the
messages with the
matching result of
one matching item
NO NO NO None
to be positive. The
value TWO
indicates that the
eNodeB discards or
modifies the
messages with the
matching result of
two matching items
to be positive. The
value THREE
indicates that the
eNodeB discards or
modifies the
messages with the
result of three
matching items to
be positive. Do not
change the setting
of this parameter
Indicates the
matching offset
used when the
eNodeB compares
a debugging
message with a
message received
or to be sent by the NO NO NO None
eNodeB. Do not
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
matching length
used when the
eNodeB compares
a debugging
message with a
message received
or to be sent by the NO NO NO None
eNodeB. Do not
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
matching content
used when the
eNodeB compares
a debugging
message with a
message received
or to be sent by the
eNodeB. The
NO NO NO None
matching content
consists of 0 to 100
hexadecimal digits.
Do not change the
setting of this
parameter without
the guidance from
Huawei Customer
Service Center.
Indicates the
matching offset
used when the
eNodeB compares
a debugging
message with a
message received
or to be sent by the NO NO NO None
eNodeB. Do not
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
matching length
used when the
eNodeB compares
a debugging
message with a
message received
or to be sent by the NO NO NO None
eNodeB. Do not
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
matching content
used when the
eNodeB compares
a debugging
message with a
message received
or to be sent by the
eNodeB. The
NO NO NO None
matching content
consists of 0 to 100
hexadecimal digits.
Do not change the
setting of this
parameter without
the guidance from
Huawei Customer
Service Center.
Indicates the
matching offset
used when the
eNodeB compares
a debugging
message with a
message received
or to be sent by the NO NO NO None
eNodeB. Do not
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
matching length
used when the
eNodeB compares
a debugging
message with a
message received
or to be sent by the NO NO NO None
eNodeB. Do not
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
matching content
used when the
eNodeB compares
a debugging
message with a
message received
or to be sent by the
eNodeB. The
NO NO NO None
matching content
consists of 0 to 100
hexadecimal digits.
Do not change the
setting of this
parameter without
the guidance from
Huawei Customer
Service Center.
modification items
for a debugging
message. Each
modification item
contains the
modification offset,
modification length,
and modification
content. The value
ZERO indicates
that the eNodeB
does not modify the
messages with
positive matching
result. The value
ONE indicates that
the eNodeB makes
one modification to
the messages with
NO NO NO None
positive matching
result. The value
TWO indicates that
the eNodeB makes
two modifications to
the messages with
positive matching
result. The value
THREE indicates
that the eNodeB
makes three
modifications to the
messages with
positive matching
result. Do not
change the setting
of this parameter
without the
guidance from
Indicates the
modification offset
used when the
eNodeB modifies a
message received
or to be sent by the
eNodeB. Do not NO NO NO None
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.
Indicates the
modification length
used when the
eNodeB modifies a
message received
or to be sent by the
eNodeB. Do not NO NO NO None
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
modification content
used when the
eNodeB modifies a
message received
or to be sent by the
eNodeB. The
modification content
NO NO NO None
consists of 0 to 100
hexadecimal digits.
Do not change the
setting of this
parameter without
the guidance from
Huawei Customer
Service Center.

Indicates the
modification offset
used when the
eNodeB modifies a
message received
or to be sent by the
eNodeB. Do not NO NO NO None
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.
Indicates the
modification length
used when the
eNodeB modifies a
message received
or to be sent by the
eNodeB. Do not NO NO NO None
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
modification content
used when the
eNodeB modifies a
message received
or to be sent by the
eNodeB. The
modification content
NO NO NO None
consists of 0 to 100
hexadecimal digits.
Do not change the
setting of this
parameter without
the guidance from
Huawei Customer
Service Center.

Indicates the
modification offset
used when the
eNodeB modifies a
message received
or to be sent by the
eNodeB. Do not NO NO NO None
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.
Indicates the
modification length
used when the
eNodeB modifies a
message received
or to be sent by the
eNodeB. Do not NO NO NO None
change the setting
of this parameter
without the
guidance from
Huawei Customer
Service Center.

Indicates the
modification content
used when the
eNodeB modifies a
message received
or to be sent by the
eNodeB. The
modification content
NO NO NO None
consists of 0 to 100
hexadecimal digits.
Do not change the
setting of this
parameter without
the guidance from
Huawei Customer
Service Center.
Indicates the ID of
an eNodeB FDD
baseband resource.
The ID uniquely
identifies an
eNodeB FDD
baseband resource
within an eNodeB.
If the
LTE_FDD(LTE
FDD) option of the
Base Band Work
Standard parameter
in a BBP MO is YES YES NO None
selected, the
eNodeB
automatically adds
an
eNodeBFddBbRes
MO for this
baseband
processing unit
(BBP) and allocates
a unique eNodeB
FDD baseband
resource ID for the
BBP MO.

Indicates the
number of the
cabinet housing the
baseband
processing unit that
provides the
baseband
resource.When the
eNodeBFddBbRes
MO is automatically NO NO NO None
added, the eNodeB
automatically
assigns a value to
this parameter
based on the
setting of the
Cabinet No.
parameter in the
BBP MO.
Indicates the
number of the
subrack housing
the baseband
processing unit that
provides the
baseband
resource.When the
eNodeBFddBbRes
MO is automatically NO NO NO None
added, the eNodeB
automatically
assigns a value to
this parameter
based on the
setting of the
Subrack No.
parameter in the
BBP MO.

Indicates the
number of the slot
housing the
baseband
processing unit that
provides the
baseband resource.
When the
eNodeBFddBbRes
NO YES NO None
MO is automatically
added, the eNodeB
automatically
assigns a value to
this parameter
based on the
setting of the Slot
No. parameter in
the BBP MO.

Indicates the
capacity of the
baseband resource
used for LTE FDD
services. When the
eNodeBFddBbRes
MO is automatically
added, the eNodeB
NO NO NO None
automatically
assigns a value to
this parameter
based on the
setting of the Base
Band Work
Standard parameter
in the BBP MO.
Indicates the
administrative state
of the baseband
resource.
BLOCKED means
that the baseband
resource cannot be
used to provide LTE NO NO NO None
FDD services.
UNBLOCKED
means that the
baseband resource
can be used to
provide LTE FDD
services.

Indicates the
operational state of
the baseband
resource.
ENABLED means
that the baseband
resource is
available.
DISABLED means
that the baseband
resource is
unavailable. If the
setting of the Base NO NO YES None
Band Work
Standard parameter
for the
corresponding
baseband
processing unit
(BBP) and the BBP
capability are
mismatched, the
setting of this
parameter does not
take effect.
Indicates the ID of
an eNodeB TDD
baseband resource.
The ID uniquely
identifies an
eNodeB TDD
baseband resource
within an eNodeB.
If the
LTE_TDD(LTE
TDD) option of the
Base Band Work
Standard parameter
in a BBP MO is YES YES NO None
selected, the
eNodeB
automatically adds
an
eNodeBTddBbRes
MO for this
baseband
processing unit
(BBP) and allocates
a unique eNodeB
TDD baseband
resource ID for the
BBP MO.

Indicates the
number of the
cabinet housing the
baseband
processing unit that
provides the
baseband resource.
When the
eNodeBTddBbRes
MO is automatically NO NO NO None
added, the eNodeB
automatically
assigns a value to
this parameter
based on the
setting of the
Cabinet No.
parameter in the
BBP MO.
Indicates the
number of the
subrack housing
the baseband
processing unit that
provides the
baseband resource.
When the
eNodeBTddBbRes
MO is automatically NO NO NO None
added, the eNodeB
automatically
assigns a value to
this parameter
based on the
setting of the
Subrack No.
parameter in the
BBP MO.

Indicates the
number of the slot
housing the
baseband
processing unit that
provides the
baseband resource.
When the
eNodeBTddBbRes
NO YES NO None
MO is automatically
added, the eNodeB
automatically
assigns a value to
this parameter
based on the
setting of the Slot
No. parameter in
the BBP MO.

Indicates the
capacity of the
baseband resource
used for LTE TDD
services. When the
eNodeBTddBbRes
MO is automatically
added, the eNodeB
NO NO NO None
automatically
assigns a value to
this parameter
based on the
setting of the Base
Band Work
Standard parameter
in the BBP MO.
Indicates the
administrative state
of the baseband
resource object.
BLOCKED means
that the baseband
resource cannot be
used to provide LTE NO NO NO None
TDD services.
UNBLOCKED
means that the
baseband resource
can be used to
provide LTE TDD
services.

Indicates the
operational state of
the baseband
resource.
ENABLED means
that the baseband
resource is
available.
DISABLED means
that the baseband
resource is
unavailable. If the
setting of the Base NO NO YES None
Band Work
Standard parameter
for the
corresponding
baseband
processing unit
(BBP) and the BBP
capability are
mismatched, the
setting of this
parameter does not
take effect.

Indicates the eX2

YES YES NO None
object ID.

Indicates whether
to configure the
control-plane or
NO NO NO None
user-plane end
point group for the
eX2 object.
Indicates the ID of
the control-plane
end point group NO YES NO None
used by the eX2
object.
Indicates the ID of
the user-plane end
NO YES NO None
point group used by
the eX2 object.
Indicates the
transport type of the
eX2 interface.
SRIO- or 10-GE-
based transport
system connecting
through the USU is
called ideal NO YES NO None
backhaul. IPRAN-
or PTN-based
transport system
shared with the S1
or X2 interface is
called non-ideal
backhaul.

Indicates the
description of the NO NO NO None
eX2 object.

Indicates the eX2

NO NO YES None
interface ID.

Indicates the status

of the eX2 NO NO YES None
interface.

Indicates the
control port (CP)
NO NO YES None
bearer ID of the
eX2 interface.

Indicates the status

of the CP bearer for NO NO YES None
the eX2 interface.

Indicates the ID of
YES YES NO None
an S1 interface.
Indicates whether
the MME at the
other end of the S1
interface supports
Huawei-proprietary
positioning
procedures, which
are included in
minimization of
drive tests (MDT).
The value
DISABLE(disable)
indicates that the
NO NO NO None
MME does not
support the
procedures and
therefore the
eNodeB cannot
obtain UE location
information from the
MME through the
procedures. The
value
ENABLE(enable)
indicates the
opposite.
MmeFeatureCfg
MO, which
determines the
control policies of
operators and the
SON functions on
the MmeFeatureCfg
MO. For an S1
interface that is
manually set up,
the parameter is set
to MANUAL_MODE
in the related
MmeFeatureCfg
MO. Operators, but
not SON functions,
can set this MO.
For an S1 interface
that is automatically NO NO NO None
set up, the
parameter is set to
AUTO_MODE in
the related
MmeFeatureCfg
MO. SON functions
can modify the
configurations of
the MO or remove
the MO, but
operators cannot
set this MO directly.
Operators can
modify the
parameter settings
in this MO only by
modifying the
settings of related
LBFD-00300101 /
TDLBFD-00300101
Indicates the X2 LBFD-00300102 /
YES YES NO
object ID. TDLBFD-00300102
LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
Indicates the ID of TDLBFD-00300101
the operator to LBFD-00300102 /
NO YES NO
which the X2 MO TDLBFD-00300102
belongs. LBFD-00300103 /
TDLBFD-00300103
 LBFD-00300101 /
Indicates the ID of
TDLBFD-00300101
the control-plane
LBFD-00300102 /
end point group NO YES NO
TDLBFD-00300102
used by the X2
LBFD-00300103 /
object.
TDLBFD-00300103

LBFD-00300101 /
Indicates the ID of TDLBFD-00300101
the user-plane end LBFD-00300102 /
NO YES NO
point group used by TDLBFD-00300102
the X2 object. LBFD-00300103 /
TDLBFD-00300103

Indicates the
compliance protocol LBFD-00300101 /
release of the TDLBFD-00300101
neighboring LBFD-00300102 /
eNodeBs to which TDLBFD-00300102
NO NO NO
the local eNodeB LBFD-00300103 /
are connected TDLBFD-00300103
through the X2 LBFD-001008 /
interfaces managed TDLBFD-070111
by the X2 MO.

Indicates the
description of the NO NO NO None
X2 object.

LBFD-00300101 /
Indicates whether
TDLBFD-00300101
to configure the
LBFD-00300102 /
control-plane or NO NO NO
TDLBFD-00300102
user-plane end
LBFD-00300103 /
point group.
TDLBFD-00300103
Indicates the ID of a
carrier-sharing
operator group that
shares the X2 MO.
If the eNodeB
works in hybrid
RAN sharing mode,
set this parameter
to a value within the
range from 1 to 5. If
the eNodeB works NO NO NO LOFD-070206
in independent
mode, RAN sharing
with common
carriers mode, or
RAN sharing with
dedicated carriers
mode, retain the
default value 255,
which is an invalid
value.

Indicates the status

of the CP bearer for NO NO YES None
the X2 interface.

Indicates the X2
NO NO YES None
interface ID.

Indicates the status

NO NO YES None
of the X2 interface.

Indicates the ID of
the CP bearer for NO NO YES None
the X2 interface.
Indicates the mobile
country code of the
neighboring
eNodeB to be
added to the list.
The value of this
YES YES NO None
parameter is a
string of three
characters, each of
which must be a
digit in the range of
0 to 9.
Indicates the mobile
network code of the
neighboring
eNodeB to be
added to the list.
The value of this
YES YES NO None
parameter is a
string of two or
three characters,
each of which must
be a digit in the
range of 0 to 9.

Indicates the ID of
the neighboring
YES YES NO None
eNodeB to be
added to the list.

Indicates whether
the X2 list is a
blacklist or whitelist.
If a neighboring
eNodeB is added to
the X2 blacklist, an
X2 interface
between the local
eNodeB and this
neighboring
eNodeB cannot be
automatically set up
or the X2 interface
set up between the
local eNodeB and NO NO NO None
this neighboring
eNodeB is
abnormal. If a
neighboring
eNodeB is added to
the X2 whitelist or
blacklist, the X2
interface between
the local eNodeB
and this
neighboring
eNodeB cannot be
automatically
removed.
Indicates the X2
interface ID. If the
X2 interface is set
up based on the
end point
configuration mode,
LBFD-00300101 /
the value range is
TDLBFD-00300101
40000 to 65535. If
LBFD-00300102 /
the X2 interface is YES YES NO
TDLBFD-00300102
set up based on the
LBFD-00300103 /
link configuration
TDLBFD-00300103
mode using the
CME or MML
commands, the
recommended
value range is 0 to
39999.

LBFD-00300101 /
Indicates the ID of TDLBFD-00300101
the control port LBFD-00300102 /
NO YES NO
bearer for the X2 TDLBFD-00300102
interface. LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
TDLBFD-00300101
Indicates the ID of
LBFD-00300102 /
the operator that
NO YES NO TDLBFD-00300102
owns the X2
LBFD-00300103 /
interface.
TDLBFD-00300103
LOFD-070206

LBFD-00300101 /
TDLBFD-00300101
Indicates the LBFD-00300102 /
protocol release TDLBFD-00300102
NO NO NO
with which the peer LBFD-00300103 /
eNodeB complies. TDLBFD-00300103
LBFD-001008 /
TDLBFD-070111
control mode of the
X2 interface, which
determines the
control policies of
operators and the
SON functions on
the X2 interface.
This parameter is
set by the system
and cannot be
modified by users.
If the X2 interface is
set up by operators
by using the CME
or MML commands,
this parameter is
LBFD-00300101 /
set to
TDLBFD-00300101
MANUAL_MODE
LBFD-00300102 /
and operators can NO NO NO
TDLBFD-00300102
configure the X2
LBFD-00300103 /
interface. If the X2
TDLBFD-00300103
interface is set up
automatically based
on the end point
configuration mode,
this parameter is
set to
AUTO_MODE and
operators can reset
the X2 interface
and query the
information of the
S1 interface, but
cannot modify the
configuration of the
S1 interface or
delete the S1

Indicates whether
the X2 interface
was created
automatically or
manually. This
parameter is set by
the system and
cannot be modified
by users. The
LBFD-00300101 /
system sets this
TDLBFD-00300101
parameter to
LBFD-00300102 /
AUTO_CREATE NO NO NO
TDLBFD-00300102
when the X2
LBFD-00300103 /
interface is created
TDLBFD-00300103
automatically using
SON and to
MANUAL_CREATE
when the X2
interface is created
manually by using
the CME or running
an MML
commands.
Indicates the ID of a
carrier-sharing
operator group that
shares the X2
Interface MO. If the
eNodeB works in
hybrid RAN sharing
mode, set this
parameter to a
value within the
range from 1 to 5. If
NO NO NO LOFD-070206
the eNodeB works
in independent
mode, RAN sharing
with common
carriers mode, or
RAN sharing with
dedicated carriers
mode, retain the
default value 255,
which is an invalid
value.

Indicates the ID of
the neighboring
eNodeB to which
the local eNodeB is
connected through
the X2 interface.
The combination of NO NO YES None
this parameter and
NbrEnbPlmnId
uniquely identifies
the neighboring
eNodeB around the
globe.

Indicates the PLMN

ID of the
neighboring
eNodeB to which NO NO YES None
the local eNodeB is
connected through
the X2 interface.
Indicates the status
of the X2 interface.
If the status is
normal, the X2
interface has been
NO NO YES None
successfully
established. If the
status is abnormal,
the X2 interface
establishment fails.
Indicates the
reason why the X2
NO NO YES None
interface is
abnormal.

Indicates the DRX

switch. The setting
of this parameter
has no effect on
dynamic DRX. DRX
applies to a CA UE
LBFD-002017 /
only when this NO NO NO
TDLBFD-002017
parameter is set to
ON(On) on both
eNodeBs to which
the PCell and SCell
of the CA UE
belong.

Indicates whether
to enable or disable
short DRX cycles. LBFD-002017 /
NO NO NO
Short DRX cycles TDLBFD-002017
reduce the traffic
delay.
TimeAlignmentTime
r parameter, the
actual value of this
parameter assigned
to a UE may be
less than the
configured value. In
addition, the
configured value
will be rounded
down to an integral
multiple of 10.
Therefore, you are
advised to
configure this
parameter to a
value that is an
integral multiple of
10. If users hope LBFD-002017 /
NO NO NO
that the value TDLBFD-002017
actually assigned to
a UE is equal to or
greater than 80 ms,
set the
TimeAlignmentTime
r parameter to a
value equal to or
greater than 10240
ms. If the
TimingAdvCmdOpt
Switch parameter is
set to ON, it is
recommended that
the
LongDrxCycleSpeci
al parameter be set
to a value smaller
than or equal to 320
Indicates the length
of the On Duration
Timer that applies
only to non-power-
saving UEs whose
RFSP indexes are
contained in the
RFSP index set or
to UEs whose
capability
information
indicates that they
do not support
LBFD-002017 /
power saving. For NO NO NO
TDLBFD-002017
details about this
timer, see 3GPP TS
36.321. Because of
the impact of CQI
reporting intervals
and SRS
transmission
intervals, the actual
value of this
parameter assigned
to a UE may be
greater than the
configured value.
Indicates the length
of the DRX
Inactivity Timer that
applies only to non-
power-saving UEs
whose RFSP
indexes are
contained in the
RFSP index set or LBFD-002017 /
NO NO NO
to UEs whose TDLBFD-002017
capability
information
indicates that they
do not support
power saving. For
details about this
timer, see 3GPP TS
36.321.

Indicates whether
to enable or disable
short DRX cycles
for non-power-
saving UEs whose
RFSP indexes are
contained in the LBFD-002017 /
NO NO NO
RFSP index set or TDLBFD-002017
to UEs whose
capability
information
indicates that they
do not support
power saving.
only to non-power-
saving UEs whose
subscriber profile ID
for RAT/frequency
priority (RFSP)
indexes are
contained in the
RFSP index set or
to UEs whose
capability
information
indicates that they
do not support
power saving.
According to 3GPP
specifications, the
length of a long
DRX cycle must be
an integer multiple LBFD-002017 /
NO NO NO
of that of a short TDLBFD-002017
DRX cycle. In
addition, the actual
value of
LongDrxCycleSpeci
al assigned to a UE
may be less than
the configured
value because of
the impact of the
SRS bandwidth and
TA period specified
by the
TimeAlignmentTime
r parameter.
Therefore, the
actual value of
ShortDrxCycleSpeci
al assigned to a UE
Indicates the length
of the DRX Short
Cycle Timer that
applies only to non-
power-saving UEs
whose RFSP
indexes are
contained in the
RFSP index set or
to UEs whose
capability
information
indicates that they
do not support
LBFD-002017 /
power saving. The NO NO NO
TDLBFD-002017
length of this timer
is expressed in the
number of short
DRX cycles. If this
parameter is set to
1, the length of this
timer is one short
DRX cycle. If this
parameter is set to
2, the length of this
timer is two short
DRX cycles. For
details, see 3GPP
TS 36.321 5.7.
Indicates the long
DRX cycle for intra-
RAT ANR. If intra-
RAT ANR is
enabled, this
parameter is valid
regardless of
whether DRX is
enabled. If a long
DRX cycle is
configured for ANR
measurement, it is
recommended that
this parameter be LBFD-002017 /
NO NO NO
set to a value equal TDLBFD-002017
to or greater than
256 ms to ensure
that the UE can
successfully obtain
the CGI of a cell.
However, if this
parameter is set to
a large value, the
delay of obtaining
the CGI is large,
and therefore the
system delay
increases.

Indicates the long

DRX cycle for inter-
RAT ANR. If inter-
RAT ANR is
enabled, this
parameter is valid
regardless of
whether DRX is
enabled. If there
are multiple inter-
RAT systems, and
all of them require
inter-RAT ANR
LBFD-002017 /
measurements, it is NO NO NO
TDLBFD-002017
recommended that
this parameter be
set to the maximum
value of the long
DRX cycle
configured for inter-
RAT ANR
measurements.
Otherwise, the
success rate for
inter-RAT ANR
measurements may
be affected.
Indicates the length
of the discontinuous
reception (DRX)
inactivity timer for
automatic neighbor
relation (ANR). If
ANR is enabled,
LBFD-002017 /
this parameter NO NO NO
TDLBFD-002017
takes effect
regardless whether
the DRX feature is
enabled. This
parameter applies
only to the LTE
FDD system.
Indicates the length
of the DRX
inactivity timer for
automatic neighbor
relation (ANR). If
ANR is enabled,
this parameter NO NO NO TDLBFD-002017
takes effect
regardless whether
the DRX feature is
enabled. This
parameter applies
only to LTE TDD.

Indicates the
extended QoS
Class Identifier LBFD-002032
(QCI), which is YES YES NO LOFD-00101502 /
required by the TDLOFD-00101502
operator for user
differentiation.

Indicates the
service type LOFD-00101502 /
NO NO NO
corresponding to TDLOFD-00101502
the extended QCI.
Indicates the weight
factor used in the LOFD-00101502 /
calculation of TDLOFD-00101502
NO NO NO
connection priorities LOFD-00301102 /
during uplink TDLOFD-00301102
scheduling.

Indicates the weight

factor used in the
calculation of LOFD-00101502 /
NO NO NO
connection priorities TDLOFD-00101502
during downlink
scheduling.

LOFD-00101502 /
Indicates the uplink
TDLOFD-00101502
minimum
LOFD-00301101
guaranteed bit rate NO NO NO
LOFD-00301102 /
of the non-GBR
TDLOFD-00301102
service.
LOFD-00301103
 LOFD-00101502 /
TDLOFD-00101502
Indicates the
LOFD-00301101 /
downlink minimum
TDLOFD-00301101
guaranteed bit rate NO NO NO
LOFD-00301103 /
of the non-GBR
TDLOFD-00301103
service.
LOFD-003016 /
TDLOFD-003016

Indicates the pre-

allocation weight.
The pre-allocation
weight of a UE is
the pre-allocation
weight of services
carried by the
highest-priority
logical channel. If
services carried by
highest-priority
logical channels
have different pre-
allocation weights,
the UE takes the TDLOFD-001015
highest pre- NO NO NO LOFD-00101502 /
allocation weight. TDLOFD-00101502
When resources
are insufficient, pre-
allocation weights
affect the pre-
allocation
probabilities of
users. The pre-
allocation
probability has a
positive correlation
with the pre-
allocation weight.
This parameter is
QCI-specific.
 LOFD-001019 /
TDLOFD-001019
Indicates the group
LOFD-001020 /
ID of the
TDLOFD-001020
parameters related
NO NO NO LOFD-001021 /
to the inter-RAT
TDLOFD-001021
handover with the
TDLOFD-001022
extended QCI.
TDLOFD-001023
TDLOFD-001035

Indicates the
prioritized bit rate of
the logical channel.
The UE scheduler
guarantees
LOFD-00101502 /
prioritized bit rates
NO NO NO TDLOFD-00101502
of logical channels
TDLOFD-001015
in descending order
of logical channel
priority. For details,
see 3GPP TS
36.321.
Indicates the
priority of the logical
channel. The UE
scheduler
guarantees
prioritized bit rates
of logical channels
in descending order
of logical channel LOFD-00101502 /
priority. Resources NO NO NO TDLOFD-00101502
are allocated in TDLOFD-001015
descending order of
logical channel
priority after the
prioritized bit rates
of all services are
guaranteed. For
details, see 3GPP
TS 36.321.

Indicates the ID of
LBFD-002008 /
an RLC/PDCP NO NO NO
TDLBFD-002008
parameter group.

Indicates whether
the extended QCI is TDLOFD-001015
NO NO NO
specific to free TDLOFD-00101502
users or paid users.
 LOFD-00301101 /
TDLOFD-00301101
LOFD-00301102 /
Indicates whether
TDLOFD-00301102
to enable flow NO NO NO
LOFD-00301103 /
control for the QCI.
TDLOFD-00301103
LOFD-003016 /
TDLOFD-003016

Indicates whether
this extended QCI
is used as the
dedicated QCI for
PTT services. If this
parameter is set to
YES(Yes), the
eNodeB ensures
the service quality
for services with
this extended QCI LOFD-081218 /
NO NO NO
the same as PTT TDLOFD-110230
services. If this
parameter is set to
NO(No), the
eNodeB processes
the data of services
with this extended
QCI the same as
common services
with an extended
QCI.
Indicates the
downlink
scheduling priority
of dedicated
bearers for PTT
services. If the
parameter is set to
EQUAL_PRI_TO_Q
CI1(Priority same
as QCI1), the
downlink
scheduling priority
of PTT services is
the same as VoIP
services (with a QCI
of 1). If this
parameter is set to
LOFD-081218 /
HIGHER_PRI_THA NO NO NO
TDLOFD-110230
N_QCI1(Priority
Higher than QCI1),
the downlink
scheduling priority
of PTT services is
higher than that of
VoIP services (with
a QCI of 1). This
parameter is valid
only if the
LtePttQoSSwitch
parameter is set to
ON(On) and the
LtePttDedicatedExt
endedQci
parameter is set to
YES(Yes).
Indicates the uplink
scheduling priority
of dedicated
bearers for PTT
services. If the
parameter is set to
EQUAL_PRI_TO_Q
CI1(Priority same
as QCI1), the uplink
scheduling priority
of PTT services is
the same as VoIP
services (with a QCI
of 1). If this
parameter is set to
HIGHER_PRI_THA
LOFD-081218 /
N_QCI1(Priority NO NO NO
TDLOFD-110230
Higher than QCI1),
the uplink
scheduling priority
of PTT services is
higher than that of
VoIP services (with
a QCI of 1). This
parameter is valid
only if the
LtePttQoSSwitch
parameter is set to
ON(On) and the
LtePttDedicatedExt
endedQci
parameter is set to
YES(Yes).

LOFD-001022 /
TDLOFD-001022
Indicates the group LOFD-001023 /
ID of the TDLOFD-001023
parameters related LOFD-001019 /
YES YES NO
to the inter-RAT TDLOFD-001019
handover with a LOFD-001020 /
specific QCI. TDLOFD-001020
LOFD-001021 /
TDLOFD-001021
Indicates the policy
of handovers to
UTRAN.
PS_HO: indicates
whether to allow PS
handovers to
LOFD-001022 /
UTRAN.
TDLOFD-001022
SRVCC: indicates NO NO NO
LOFD-001019 /
whether to allow
TDLOFD-001019
transfers to UTRAN
in SRVCC mode.
REDIRECTION:
indicates whether to
allow redirection to
UTRAN.

Indicates the switch

used to enable or
disable the single
radio voice call
continuity (SRVCC)
handover to
GERAN GSM.
If this switch is set LOFD-001023 /
to on, the UE can TDLOFD-001023
NO NO NO
perform the SRVCC LOFD-001020 /
handover to the TDLOFD-001020
GERAN GSM cell.
If this switch is set
to off, the UE
cannot perform the
SRVCC handover
to the GERAN GSM
cell.
Indicates the policy
of handovers to
GPRS/EDGE
networks.
PS_HO:
Indicates whether
PS handovers to
neighboring
GPRS/EDGE cells
are allowed.
CCO_HO:
Indicates whether
CCO to neighboring TDLOFD-001023
GPRS/EDGE cells NO NO NO LOFD-001020 /
is allowed. TDLOFD-001020
SRVCC:
Indicates whether
SRVCC to
neighboring
GPRS/EDGE cells
is allowed.
REDIRECTION:
Indicates whether
redirections to
neighboring
GPRS/EDGE cells
are allowed.

Indicates the switch

used to enable or
disable QCI-specific
SRVCC to
CDMA2000 1xRTT.
If this switch is on,
UEs can perform
SRVCC to NO NO NO None
CDMA2000 1xRTT
cells.
If this switch is off,
UEs cannot perform
SRVCC to
CDMA2000 1xRTT
cells.
Indicates the policy
of handovers to
CDMA2000 HRPD
networks.
NON_OPT_HO:
Indicates whether
to allow non-
optimized
handovers to
LOFD-001021 /
neighboring NO NO NO
TDLOFD-001021
CDMA2000 HRPD
cells.
OPT_HO:
Indicates whether
to allow optimized
handovers to
neighboring
CDMA2000 HRPD
cells.

LOFD-001019 /
TDLOFD-001019
LOFD-001020 /
Indicates whether TDLOFD-001020
to permit or forbid LOFD-001021 /
the inter-RAT NO NO NO TDLOFD-001021
handover under the TDLBFD-00201801
QCI. TDLOFD-001022
TDLOFD-001023
TDLOFD-001033
TDLOFD-001034

Indicates whether
to allow the fast
ANR under the
QCI. The function
specified by this
parameter is an NO NO NO None
extended function
and is reserved.
The current version
does not support
this function.
Indicates the index
mapped to the MCS
offset for channel
quality indicators
(CQIs) transmitted
with data on
PUSCH. For
details, see 3GPP
TS 36.213. Some
values are
reserved, for
NO NO NO None
example, values 0
and 1 are reserved
in 3GPP TS 36.213
Release 9. When
this parameter is
set to a reserved
value, a UE initiates
an RRC connection
reestablishment or
fails to access the
network.

Indicates the index

mapped to the MCS
offset for rank
indications (RIs)
transmitted with
data on PUSCH.
For details, see
3GPP TS 36.213.
Some values are
reserved, for
example, values 13,
NO NO NO None
14, and 15 are
reserved in 3GPP
TS 36.213 Release
9. When this
parameter is set to
a reserved value, a
UE initiates an RRC
connection
reestablishment or
fails to access the
network.
Indicates the index
mapped to the MCS
offset for
acknowledgments
(ACKs) transmitted
with data on
PUSCH. For
details, see 3GPP
TS 36.213. Some
values are
reserved, for
NO NO NO None
example, value 15
is reserved in 3GPP
TS 36.213 Release
9. When this
parameter is set to
a reserved value, a
UE initiates an RRC
connection
reestablishment or
fails to access the
network.

Indicates the ID of
LBFD-002008 /
the RLC/PDCP YES YES NO
TDLBFD-002008
parameter group.
Indicates the length
LBFD-002008 /
of the PDCP NO NO NO
TDLBFD-002008
discard timer.

Indicates the RLC

transmission mode.
LBFD-002008 /
Only the AM and NO NO NO
TDLBFD-002008
UM modes are
available.
Indicates the UE-
specific maximum
number of RLC
ARQ
retransmissions,
namely the
maximum number
of AM PDU LBFD-002008 /
NO NO NO
retransmissions. TDLBFD-002008
When the number
of retransmissions
reaches the value
of this parameter,
RRC connection re-
establishment is
initiated.
Indicates the
eNodeB-specific
maximum number
of RLC ARQ
retransmissions,
which limits the
maximum number
of acknowledged
LBFD-002008 /
mode (AM) PDU NO NO NO
TDLBFD-002008
retransmissions.
When the number
of RLC ARQ
retransmissions
reaches the value
of this parameter,
eNodeB releases
the UE.
Indicates the UE-
specific data
volume threshold of
PDUs to trigger
polling. When the
LBFD-002008 /
transmitted data NO NO NO
TDLBFD-002008
volume reaches the
value of this
parameter, the Poll
flag is set in the
PDU header.
Indicates the
eNodeB-specific
data volume
threshold of PDUs
to trigger polling.
When the LBFD-002008 /
NO NO NO
transmitted data TDLBFD-002008
volume reaches the
value of this
parameter, the Poll
flag is set in the
PDU header.
Indicates the UE-
specific number of
PDUs to trigger
polling. When the
transmitted number LBFD-002008 /
NO NO NO
of PDUs reaches TDLBFD-002008
the value of this
parameter, the Poll
flag is set in the
PDU header.
Indicates the
eNodeB-specific
number of PDUs to
trigger polling.
When the
LBFD-002008 /
transmitted number NO NO NO
TDLBFD-002008
of PDUs reaches
the value of this
parameter, the Poll
flag is set in the
PDU header.
Indicates the length
of the Polling PDU LBFD-002008 /
NO NO NO
retransmission TDLBFD-002008
timer for the UE.
Indicates the length
of the Polling PDU
LBFD-002008 /
retransmission NO NO NO
TDLBFD-002008
timer for the
eNodeB.
Indicates the length
of the UE-specific
timer for prohibiting LBFD-002008 /
NO NO NO
status reporting TDLBFD-002008
from the receiver in
AM.
Indicates the length
of the eNodeB-
specific timer for LBFD-002008 /
NO NO NO
prohibiting status TDLBFD-002008
reporting from the
receiver in AM.
Indicates the length
of the UE-specific
LBFD-002008 /
timer for reordering NO NO NO
TDLBFD-002008
at the receiver in
AM.
Indicates the length
of the eNodeB-
LBFD-002008 /
specific timer for NO NO NO
TDLBFD-002008
reordering at the
receiver in AM.

Indicates the length

of a PDCP
LBFD-002008 /
sequence number NO NO NO
TDLBFD-002008
of a UL DRB in RLC
UM.
Indicates the length
of a UL RLC
sequence number LBFD-002008 /
NO NO NO
in UM. The length is TDLBFD-002008
permanently 10 bits
in AM.

Indicates the length

of a DL RLC
sequence number LBFD-002008 /
NO NO NO
in UM. The length is TDLBFD-002008
permanently 10 bits
in AM.
Indicates the length
of the UE-specific
LBFD-002008 /
timer for reordering NO NO NO
TDLBFD-002008
at the receiver in
UM.
Indicates the length
of the eNodeB-
LBFD-002008 /
specific timer for NO NO NO
TDLBFD-002008
reordering at the
receiver in UM.

Indicates whether a
PDCP status report LBFD-002008 /
NO NO NO
is required upon TDLBFD-002008
handover in AM.
Indicates whether
to enable the
adaptive
configuration of
parameters related
to Radio Link
Control (RLC). If
this parameter is
set to ON(On), the
eNodeB adaptively
configures the
lengths of the
following timers
according to the
number of UEs in
the cell when new
UEs access the LBFD-002008 /
NO NO NO
cell: TDLBFD-002008
(1) The polling PDU
retransmission
timer for the UE
(2) The polling PDU
retransmission
timer for the
eNodeB
(3) The UE-specific
timer for prohibiting
status reporting
from the receiver
(4) The eNodeB-
specific timer for
prohibiting status
reporting from the
receiver
Indicates the length
of the polling PDU
retransmission
timer for the
eNodeB, which is
LBFD-002008 /
used when the NO NO NO
TDLBFD-002008
RlcParaAdaptSwitc
h parameter is set
to ON(On) and the
number of UEs in
the cell is large.
Indicates the length
of the eNodeB-
specific timer for
prohibiting status
reporting from the
receiver, which is LBFD-002008 /
NO NO NO
used when the TDLBFD-002008
RlcParaAdaptSwitc
h parameter is set
to ON(On) and the
number of UEs in
the cell is large.
Indicates the length
of the polling PDU
retransmission
timer for the UE,
which is used when
LBFD-002008 /
the NO NO NO
TDLBFD-002008
RlcParaAdaptSwitc
h parameter is set
to ON(On) and the
number of UEs in
the cell is large.
Indicates the length
of the UE-specific
timer for prohibiting
status reporting
from the receiver,
which is used when LBFD-002008 /
NO NO NO
the TDLBFD-002008
RlcParaAdaptSwitc
h parameter is set
to ON(On) and the
number of UEs in
the cell is large.
Indicates whether
the eNodeB is
compatible with the
UE that does not
support the RLC
transmission in
unacknowledged
mode (UM) mode.
An eNodeB
configures the RLC
transmission mode
to UM mode of QCI
4, 6, 7, 8, or 9, and
a UE that does not
support the RLC
transmission in UM LBFD-002008 /
NO NO NO
mode attempts to TDLBFD-002008
set up bearers of
QCI 4, 6, 7, 8, or 9.
If this switch is
turned on, the
eNodeB finds the
QCI with the RLC
transmission mode
set to
acknowledged
mode (AM) in the
sequence of QCIs
9, 8, 6, and 4 and
sets up the bearers
in the AM mode of
the queried QCI.
Indicates whether
to enable separate
configuration of the LBFD-002008 /
NO NO NO
PDCP discard timer TDLBFD-002008
for the uplink and
downlink.
Indicates the value
of the downlink
PDCP discard timer
in the eNodeB. If
PDCP PDUs have
been buffered for a LBFD-002008 /
NO NO NO
period longer than TDLBFD-002008
the timer value, the
eNodeB discards
the PDUs. This
timer takes effect
only on DRBs.
threshold, the
following
parameters take
effect on non-GBR
bearers in RLC AM
for the CA UE:
UeAmReorderingTi
mer,
ENodeBAmReorder
ingTimer,
UeStatusProhibitTi
mer, and
ENodeBStatusProhi
bitTimer.
When the number
does not exceed
the threshold, the
following
LBFD-002008 /
parameters take NO NO NO
TDLBFD-002008
effect:
-
min(CaUeReorderin
gTimer,
UeAmReorderingTi
mer)
-
min(CaUeReorderin
gTimer,
ENodeBAmReorder
ingTimer)
-
min(CaUeStatProh
Timer,
UeStatusProhibitTi
mer)
-
min(CaUeStatProh
Indicates the length
of the reordering
timer that applies to
non-GBR bearers in
RLC AM for CA UEs
in their PCell when LBFD-002008 /
NO NO NO
the number of UEs TDLBFD-002008
connected to the
cell does not
exceed the value of
CaUeRlcParaAdptiv
eThd.
Indicates the length
of the status
reporting prohibition
timer that applies to
non-GBR bearers in
RLC AM for CA UEs
LBFD-002008 /
in their PCell when NO NO NO
TDLBFD-002008
the number of UEs
connected to the
cell does not
exceed the value of
CaUeRlcParaAdptiv
eThd.

Indicates the length

of a PDCP LBFD-002008 /
NO NO NO
sequence number TDLBFD-002008
in RLC AM.

Indicates whether
the SRB ID of the
SRB RLC/PDCP LBFD-002008 /
YES YES NO
parameter group. TDLBFD-002008
The SRB ID can be
SRB1 or SRB2.
Indicates the UE-
specific maximum
number of RLC
ARQ
retransmissions,
which limits the
maximum number
of AM PDU
retransmissions.
When the number
of RCL ARQ
retransmissions LBFD-002008 /
NO NO NO
reaches this TDLBFD-002008
parameter value,
the RRC
connection
reestablishment is
triggered. If you
need to change the
value of this
parameter, turn to
Huawei technical
support personnel
for assistance.

Indicates the
eNodeB-specific
maximum number
of RLC ARQ
retransmissions,
which limits the
maximum number
of acknowledged
mode (AM) PDU
retransmissions.
When the number
LBFD-002008 /
of RLC ARQ NO NO NO
TDLBFD-002008
retransmissions
reaches the value
of this parameter,
the eNodeB
releases the UE. If
you need to change
the value of this
parameter, turn to
Huawei technical
support personnel
for assistance.
Indicates the UE-
specific data
volume threshold of
PDUs to trigger
polling. When the
data volume of
transmitted PDUs
reaches this
LBFD-002008 /
parameter value, a NO NO NO
TDLBFD-002008
Poll flag is set in the
PDU headers. If
you need to change
the value of this
parameter, turn to
Huawei technical
support personnel
for assistance.
Indicates the
eNodeB-specific
data volume
threshold of PDUs
to trigger polling.
When the data
volume of
transmitted PDUs
reaches this LBFD-002008 /
NO NO NO
parameter value, a TDLBFD-002008
Poll flag is set in the
PDU headers. If
you need to change
the value of this
parameter, turn to
Huawei technical
support personnel
for assistance.
Indicates the UE-
specific number of
PDUs to trigger
polling. When the
number of
transmitted PDUs
reaches this
parameter value, a LBFD-002008 /
NO NO NO
Poll flag is set in the TDLBFD-002008
PDU headers. If
you need to change
the value of this
parameter, turn to
Huawei technical
support personnel
for assistance.
Indicates the
eNodeB-specific
number of PDUs to
trigger polling When
the number of
transmitted PDUs
reaches this
parameter value, a LBFD-002008 /
NO NO NO
Poll flag is set in the TDLBFD-002008
PDU headers. If
you need to change
the value of this
parameter, turn to
Huawei technical
support personnel
for assistance.
Indicates the length
of the Polling PDU
retransmission
timer for the UE. If
you need to change LBFD-002008 /
NO NO NO
the value of this TDLBFD-002008
parameter, turn to
Huawei technical
support personnel
for assistance.
Indicates the length
of the Polling PDU
retransmission
timer for the
eNodeB. If you
LBFD-002008 /
need to change the NO NO NO
TDLBFD-002008
value of this
parameter, turn to
Huawei technical
support personnel
for assistance.
Indicates the length
of the UE-specific
timer for prohibiting
the receiver from
sending status
reports in AM. If you LBFD-002008 /
NO NO NO
need to change the TDLBFD-002008
value of this
parameter, turn to
Huawei technical
support personnel
for assistance.
Indicates the length
of the eNodeB-
specific timer for
prohibiting status
reporting from the
receiver in AM. If LBFD-002008 /
NO NO NO
you need to change TDLBFD-002008
the value of this
parameter, turn to
Huawei technical
support personnel
for assistance.
Indicates the length
of the UE-specific
timer for reordering
at the receiver in
AM. If you need to LBFD-002008 /
NO NO NO
change the value of TDLBFD-002008
this parameter, turn
to Huawei technical
support personnel
for assistance.
Indicates the length
of the eNodeB-
specific timer for
reordering at the
receiver in AM. If
LBFD-002008 /
you need to change NO NO NO
TDLBFD-002008
the value of this
parameter, turn to
Huawei technical
support personnel
for assistance.

Indicates the QoS

Class Identifier
(QCI) of an EPS
bearer. Different
QCIs represent
different QoS
specifications such
LOFD-00101502 /
as the packet delay
TDLOFD-00101502
budget, packet YES YES NO
TDLBFD-002025
error loss rate, and
TDLOFD-001015
resource type
(whether the
service is a GBR
service or not). For
details, see Table
6.1.7 in 3GPP TS
23.203.
Indicates the weight
factor used in the LOFD-00101502 /
calculation of TDLOFD-00101502
NO NO NO
connection priorities LOFD-00301102 /
during uplink TDLOFD-00301102
scheduling.

Indicates the weight

factor used in the
calculation of LOFD-00101502 /
NO NO NO
connection priorities TDLOFD-00101502
during downlink
scheduling.

LOFD-00101502 /
Indicates the uplink TDLOFD-00101502
minimum LOFD-00301101
guaranteed bit rate NO NO NO LOFD-00301102
of the non-GBR LOFD-00301103
service. TDLBFD-002025
TDLOFD-001015
 LOFD-00101502 /
Indicates the
TDLOFD-00101502
downlink minimum
LOFD-00301101
guaranteed bit rate NO NO NO
LOFD-00301103
of the non-GBR
LOFD-003016 /
service.
TDLOFD-003016

Indicates the pre-

allocation weight.
The pre-allocation
weight of a UE is
the pre-allocation
weight of services
carried by the
highest-priority
logical channel. If
services carried by
highest-priority
logical channels
have different pre-
allocation weights,
the UE takes the LOFD-00101502 /
highest pre- NO NO NO TDLOFD-00101502
allocation weight. TDLOFD-001015
When resources
are insufficient, pre-
allocation weights
affect the pre-
allocation
probabilities of
users. The pre-
allocation
probability has a
positive correlation
with the pre-
allocation weight.
This parameter is
QCI-specific.
 LOFD-001019 /
TDLOFD-001019
Indicates the ID of a LOFD-001020 /
parameter group TDLOFD-001020
NO NO NO
related to inter-RAT LOFD-001021 /
handover. TDLOFD-001021
TDLOFD-001022
TDLOFD-001023

LOFD-00101502 /
Indicates the ID of
TDLOFD-00101502
an RLC/PDCP NO NO NO
TDLBFD-002025
parameter group.
TDLOFD-001015

Indicates the
prioritized bit rate of
the logical channel.
The UE scheduler
guarantees LOFD-00101502 /
prioritized bit rates TDLOFD-00101502
NO NO NO
of logical channels TDLBFD-002025
in descending order TDLOFD-001015
of logical channel
priority. For details,
see 3GPP TS
36.321.
Indicates the
priority of the logical
channel. The UE
scheduler
guarantees
prioritized bit rates
of logical channels
in descending order
LOFD-00101502 /
of logical channel
TDLOFD-00101502
priority. Resources NO NO NO
TDLBFD-002025
are allocated in
TDLOFD-001015
descending order of
logical channel
priority after the
prioritized bit rates
of all services are
guaranteed. For
details, see 3GPP
TS 36.321.

LOFD-00301101 /
TDLOFD-00301101
LOFD-00301102 /
Indicates whether
TDLOFD-00301102
to enable flow NO NO NO
LOFD-00301103 /
control for the QCI.
TDLOFD-00301103
LOFD-003016 /
TDLOFD-003016
Indicates the QoS
class identifier
(QCI) of an evolved
packet system
(EPS) bearer.
Different QCIs
indicate different
QoS requirements, YES YES NO None
such as the packet
delay budget,
packet error loss
rate, and resource
type. For details,
see Table 6.1.7 in
3GPP TS 23.203.

Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 10 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 11 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 12 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 13 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 14 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 15 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 16 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 17 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 18 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 19 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 20 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 21 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates whether
to enable or disable
adaptive CQI
reporting. If this
parameter is set to
ON, the CQI period
adaptively changes LBFD-002025
based on the air LOFD-00101502
NO NO NO
interface load of the TDLOFD-001049
cell. If this TDLOFD-001061
parameter is set to
OFF, the CQI period
is the specified by
the
UserCqiPeriodCfg
parameter.
Indicates the fixed
CQI period. A fixed
CQI period is used
when CQI period
adaptation is
LBFD-002025 /
disabled. If the
TDLBFD-002025
UserCqiPeriodCfg NO NO NO
LOFD-00101502 /
parameter is set to
TDLOFD-00101502
2 ms for TDD cells,
the eNodeB
automatically
changes the value
to 5 ms.

Indicates whether
CQI and Ack or
Nack can be
concurrently sent
over the PUCCH.
For details, see the
contents related to
PUCCH format in
3GPP TS36.213.
When this
parameter is set to
OFF, the value of
simultaneousAckNa LBFD-001006 /
ckAndCQI becomes TDLBFD-001006
False, that is, CQI NO NO NO LOFD-00101501 /
and Ack or Nack TDLOFD-00101501
cannot be sent TDLOFD-001015
simultaneously over
the PUCCH. When
this parameter is
set to ON, the value
of
simultaneousAckNa
ckAndCQI becomes
True, that is, CQI
and Ack or Nack
can be sent
simultaneously over
the PUCCH.
Indicates whether
to enable the
optimization on CQI
reporting periods
and PUCCH
resources for CQI
reporting. If this
switch is turned on,
the eNodeB
configures less UEs
with a short CQI
reporting period,
decreasing PUCCH
resources to be
used and
increasing available NO NO NO LBFD-002003
PUSCH resources.
If this switch is
turned off, the
eNodeB configures
more UEs with a
short CQI reporting
period, increasing
PUCCH resources
to be used and
decreasing
available PUSCH
resources, This
parameter applies
only to LTE FDD
cells.
Indicates the
aperiodic CQI
reporting
configurations and
the trigger condition
of aperiodic CQI
reporting during
handovers. When
this switch is turned
on, the aperiodic
CQI reporting
configurations are
included in
handover
commands. If no
periodic CQI LBFD-002025 /
reporting TDLBFD-002025
NO NO NO
configurations is LOFD-00101502 /
configured for a UE, TDLOFD-00101502
an aperiodic CQI
reporting is
triggered after the
UE is handed over
and then has data
to transmit. When
this switch is turned
off, the aperiodic
CQI reporting
configurations are
not included in
handover
commands but are
configured after the
UE is handed over.
Indicates whether
CQI and
ACK/NACK can be
simultaneously
transmitted over the
PUCCH of format 3.
For details about
PUCCH format 3,
see 3GPP TS
36.213. When this
parameter is set to LBFD-001006 /
OFF, the TDLBFD-001006
simultaneous NO NO NO LOFD-00101501 /
transmission is not TDLOFD-00101501
allowed. When this TDLOFD-001015
parameter is set to
ON, the IE
simultaneousAckNa
ckAndCQI-Format3-
r11 takes the value
"Setup", meaning
that the
simultaneous
transmission is
allowed.

Indicates whether
to enable or disable
SRS period
adaptation. If this
parameter is set to
ON, the SRS period
adaptively changes
LBFD-002003 /
based on the SRS NO NO NO
TDLBFD-002003
algorithm. If this
parameter is set to
OFF, the SRS
period is the
specified by the
UserSrsPeriodCfg
parameter.
Indicates the fixed
SRS period. A fixed
SRS period is used LBFD-002003 /
NO NO NO
when SRS period TDLBFD-002003
adaptation is
disabled.

Indicates the type

allocation code
(TAC) in the
IMEISV of
abnormal UEs. The
TAC identifies the
YES YES NO LBFD-081103
UE model.For
details about the
definition of
IMEISV, see section
6.2.2 in 3GPP TS
23.003.
Indicates whether
the SVN is required
to be specified in NO NO NO LBFD-081103
the IMEISV of
abnormal UEs.

Indicates the
software version
number (SVN) in
the IMEISVs of
UEs. Each SVN
identifies a software
version of UEs. For
details about
IMEISVs, see
section 6.2.2 in NO NO NO LBFD-081103
3GPP TS 23.003
V8.21.0 or later
releases. If the
ImeisvSvnCfgInd
parameter is set to
NOT_CFG(NOT_C
FG), the GUI value
of the ImeisvSvn
parameter is NULL.
event-triggered
ANR with
CDMA2000.
DYNAMIC_DRX_S
WITCH_OFF(Dyna
mic DRX Switch
Off): If this option is
selected, dynamic
LOFD-002001
DRX is disabled for
LOFD-002002
defective UEs.
LOFD-001105
CA_SWITCH_OFF(
LAOFD-001001
CA Switch Off): If
LAOFD-001002
this option is
LAOFD-070201
selected, the
LAOFD-001003
following functions
LAOFD-080207
are disabled for
LAOFD-080208
defective UEs:
LAOFD-080202
SCell configuration
LOFD-001048
and PCC
NO NO NO LOFD-001001
anchoring.
LOFD-001003
TTI_BUNDLING_S
LOFD-001060
WITCH_OFF(TTI
LBFD-002031
Bundling Switch
LOFD-001017
Off): If this option is
TDLOFD-002001
selected, TTI
TDLOFD-002002
bundling is disabled
TDLOFD-00110501
for defective UEs.
TDLAOFD-001002
MIMO_TM_MODE_
TDLAOFD-070201
SET(MIMO TM
TDLOFD-001048
Mode Set): If this
LBFD-081103
option is selected,
the
MimoAdaptiveSwitc
h and
InitialMimoType
parameters are set
to OL_ADAPTIVE
and ADAPTIVE,
Indicates the
description of the
NO NO NO LBFD-081103
model of abnormal
UE.
Indicates whether
to whitelist some
features.
RankDetectSwitchO
n: Indicates
whether the LBFD-081103 /
NO NO NO
eNodeB performs TDLBFD-081103
rank detection for
the UE. This
function is enabled
only if this option is
selected.

Indicates the QoS

class identifier
(QCI).
QCI 1 indicates
voice services.
QCI 2 indicates
video (live
streaming) services.
QCI 3 indicates
real-time gaming
services.
QCI 4 indicates
YES YES NO None
video (buffered
streaming) services.
QCI 5 indicates IMS
signaling.
QCI 7 indicates
voice, video, and
interactive gaming
services.
QCIs 6, 8, and 9
indicate video
services and TCP-
based services.
Indicates the length
of the timer for
periodic
transmission of
buffer status reports
(BSRs).
BSRs are sent
periodically or as
triggered by events.
Periodic
NO NO NO None
transmission of
BSRs uses the
timer specified by
this parameter.
When the timer
expires, a BSR is
sent.
After the BSR is
sent, the timer is
restarted.

Indicates the length

of the BSR (Buffer
Status Report)
retransmission NO NO NO None
timer. This timer is
started after a BSR
is sent.
Indicates the
measurement gap
pattern.
The eNodeB
defines
measurement gaps
for UEs in
LBFD-00201802 /
connected mode.
TDLBFD-00201802
During the
LOFD-001019 /
measurement gaps,
TDLOFD-001019
a UE measures the
LOFD-001020 /
signal quality of the
TDLOFD-001020
cells on a specific
LOFD-001021 /
frequency.
TDLOFD-001021
There are two gap
TDLBFD-002018
patterns: pattern 1
TDLBFD-00201804
and pattern 2. In NO NO NO
TDLBFD-00201805
pattern 1, the gap
TDLOFD-001022
width is 6 ms and
TDLOFD-001023
the repetition period
TDLOFD-001033
is 40 ms. In pattern
TDLOFD-001034
2, the gap width is 6
TDLOFD-001035
ms and the
TDLOFD-001043
repetition period is
TDLOFD-001072
80 ms. For details,
TDLOFD-001046
see 3GPP TS
TDLOFD-001073
36.331. Pattern 1
and pattern 2
correspond to Gap
Pattern Id 0 and
Gap Pattern Id 1 in
3GPP TS 36.331,
respectively.

Indicates the upper-

layer filtering
coefficient for
RSRP
measurements on
E-UTRAN. LBFD-00201801 /
A larger value of TDLBFD-00201801
this parameter LBFD-00201802 /
indicates a stronger TDLBFD-00201802
NO NO NO
smoothing effect LBFD-00201804 /
and higher TDLBFD-00201804
resistance to fast LBFD-00201805 /
fading, but it may TDLBFD-00201805
weaken the tracing
capability towards
varying signals. For
details, see 3GPP
TS 36.331.
Indicates the upper-
layer filtering
coefficient for
RSRQ
measurements on
E-UTRAN. LBFD-00201801 /
A larger value of TDLBFD-00201801
this parameter LBFD-00201802 /
indicates a stronger TDLBFD-00201802
NO NO NO
smoothing effect LBFD-00201804 /
and higher TDLBFD-00201804
resistance to fast LBFD-00201805 /
fading, but it may TDLBFD-00201805
weaken the tracing
capability towards
varying signals. For
details, see 3GPP
TS 36.331.

Indicates the L3
filtering coefficient
used for the
measurement
quantity in inter-
RAT measurements
of GERAN. LOFD-001020 /
A great value of this TDLOFD-001020
parameter indicates NO NO NO TDLOFD-001023
a strong smoothing TDLOFD-001034
effect and a high TDLOFD-001053
anti-fast-fading
capability, but a low
signal change
tracing capability.
For details, see
3GPP TS 36.331.
 LBFD-00201801 /
TDLBFD-00201801
LBFD-00201802 /
TDLBFD-00201802
LOFD-001019 /
TDLOFD-001019
LOFD-001020 /
Indicates whether TDLOFD-001020
the measurement LOFD-001021
NO NO NO
threshold needs to TDLBFD-002018
be set. TDLBFD-00201804
TDLBFD-00201805
TDLOFD-001022
TDLOFD-001023
TDLOFD-001043
TDLOFD-001072
TDLOFD-001046
TDLOFD-001073
 LBFD-00201801 /
Indicates the
TDLBFD-00201801
threshold below
LBFD-00201802 /
which
TDLBFD-00201802
measurements on
LBFD-00201804 /
neighboring cells
TDLBFD-00201804
are started. If the
LBFD-00201805 /
signal quality of the
TDLBFD-00201805
serving cell
LOFD-001019 /
exceeds this
TDLOFD-001019
threshold, the UE is NO NO NO
LOFD-001020 /
not required to
TDLOFD-001020
perform intra-
LOFD-001021
frequency, inter-
TDLBFD-002018
frequency, or inter-
TDLBFD-001022
RAT
TDLBFD-001023
measurements,
TDLBFD-001043
leading to reduced
TDLBFD-001072
power
TDLBFD-001046
consumption.
TDLBFD-001073
 LBFD-00201801 /
TDLBFD-00201801
LBFD-00201802 /
TDLBFD-00201802
LOFD-001019 /
Indicates whether
TDLOFD-001019
mobility-based cell
LOFD-001020 /
handover
NO NO NO TDLOFD-001020
measurement
TDLBFD-002018
parameters need to
TDLBFD-00201804
be set.
TDLBFD-00201805
TDLBFD-001043
TDLBFD-001072
TDLBFD-001046
TDLBFD-001073
Indicates the cycle
during which
evaluations of the
UE medium and
high mobility states
in
RRC_CONNECTE LBFD-00201801 /
D mode are TDLBFD-00201801
performed. It is one LBFD-00201802 /
of the key TDLBFD-00201802
parameters in LOFD-001019 /
deciding on a UE's TDLOFD-001019
mobility state. If this LOFD-001020 /
parameter is set to TDLOFD-001020
a small value, NO NO NO TDLBFD-002018
switchings among LBFD-00201804 /
mobility states may TDLBFD-00201804
be frequent and the LBFD-00201805 /
decision precision TDLBFD-00201805
may be relatively TDLOFD-001043
low. If this TDLOFD-001072
parameter is set to TDLOFD-001046
a large value, TDLOFD-001073
switchings among
mobility states are
less frequent and
the decision
precision is
relatively high.
Indicates the cycle
during which
evaluations of the
UE normal mobility
state in
RRC_CONNECTE
LBFD-00201801 /
D mode are
TDLBFD-00201801
performed. It is one
LBFD-00201802 /
of the key
TDLBFD-00201802
parameters in
LOFD-001019 /
deciding on a UE's
TDLOFD-001019
mobility state. If this
LOFD-001020 /
parameter is set to
TDLOFD-001020
a small value,
NO NO NO TDLBFD-002018
switchings among
LBFD-00201804 /
mobility states may
TDLBFD-00201804
be frequent and the
LBFD-00201805 /
decision precision
TDLBFD-00201805
may be relatively
TDLBFD-001043
low. If this
TDLBFD-001072
parameter is set to
TDLBFD-001046
a large value,
TDLBFD-001073
switchings among
mobility states are
less frequent and
the decision
precision is
relatively high.
Indicates the
handover number
threshold used in
the UE medium LBFD-00201801 /
mobility state TDLBFD-00201801
evaluation. If the LBFD-00201802 /
number of TDLBFD-00201802
handovers LOFD-001019 /
performed during a TDLOFD-001019
period of time LOFD-001020 /
specified by the NO NO NO TDLOFD-001020
TcrMaxConnMode TDLBFD-002018
parameter exceeds TDLBFD-00201804
the value of this TDLBFD-00201805
parameter, the UE TDLBFD-001043
is considered to be TDLBFD-001072
in medium mobility TDLBFD-001046
state and its TDLBFD-001073
handover-related
parameters are
adjusted.
Indicates the
handover number
LBFD-00201801 /
threshold used in
TDLBFD-00201801
the UE high mobility
LBFD-00201802 /
state evaluation. If
TDLBFD-00201802
the number of
LOFD-001019 /
handovers
TDLOFD-001019
performed during a
LOFD-001020 /
period of time
TDLOFD-001020
specified by the
NO NO NO TDLBFD-002018
TcrMaxConnMode
LBFD-00201804 /
parameter exceeds
TDLBFD-00201804
the value of this
LBFD-00201805 /
parameter, the UE
TDLBFD-00201805
is considered to be
TDLOFD-001043
in high mobility
TDLOFD-001072
state and its
TDLOFD-001046
handover-related
TDLOFD-001073
parameters are
adjusted.
 LBFD-00201801 /
Indicates the TDLBFD-00201801
scaling factor for LBFD-00201802 /
the time-to-trigger TDLBFD-00201802
defined for medium- LOFD-001019 /
mobility UEs. For a TDLOFD-001019
UE in medium LOFD-001020 /
mobility, the time-to- NO NO NO TDLOFD-001020
trigger used in TDLBFD-002018
event evaluation is TDLBFD-00201804
multiplied by this TDLBFD-00201805
scaling factor, to TDLBFD-001043
facilitate triggering TDLBFD-001072
of the handover. TDLBFD-001046
TDLBFD-001073
 LBFD-00201801 /
Indicates the TDLBFD-00201801
scaling factor for LBFD-00201802 /
the time-to-trigger TDLBFD-00201802
defined for high- LOFD-001019 /
mobility UEs. For a TDLOFD-001019
UE in high mobility, LOFD-001020 /
the time-to-trigger NO NO NO TDLOFD-001020
used in event TDLBFD-002018
evaluation is TDLBFD-00201804
multiplied by this TDLBFD-00201805
scaling factor, to TDLBFD-001043
facilitate triggering TDLBFD-001072
of the handover. TDLBFD-001046
TDLBFD-001073

Indicates the
filtering coefficient
for RSCP
measurements on
UTRAN.
A larger value of
this parameter
LOFD-001019 /
indicates a stronger
TDLOFD-001019
smoothing effect NO NO NO
TDLOFD-001022
and higher
TDLOFD-001033
resistance to fast
fading, but it may
weaken the tracing
capability towards
varying signals. For
details, see 3GPP
TS 36.331.
Indicates the upper-
layer filtering
coefficient for Ec/No
measurements on
UTRAN.
A larger value of
this parameter
LOFD-001019 /
indicates a stronger
TDLOFD-001019
smoothing effect NO NO NO
TDLOFD-001022
and higher
TDLOFD-001033
resistance to fast
fading, but it may
weaken the tracing
capability towards
varying signals. For
details, see 3GPP
TS 36.331.

Indicates the
punishment time for
handover
preparation failures
LBFD-00201805 /
in optimized
TDLBFD-00201805
handovers,
LOFD-001043 /
including
TDLOFD-001043
frequency-priority- NO NO NO
LOFD-001046 /
based handovers,
TDLOFD-001046
service-based
LOFD-00105401 /
handovers, SPID-
TDLOFD-00105401
based handovers
back to the
HPLMN, and QoE-
based handovers.
Indicates the LOFD-001090 /
maximum number TDLOFD-001090
of cells to be LOFD-001019 /
included in the TDLOFD-001019
measurement LOFD-001020 /
report after an inter- TDLOFD-001020
RAT handover LOFD-001021 /
NO NO NO
event or a periodic TDLOFD-001021
inter-RAT TDLBFD-001022
measurement for TDLBFD-001023
ANR purposes is TDLBFD-001043
triggered. For TDLBFD-001072
details, see 3GPP TDLBFD-001046
TS 36.331. TDLBFD-001073

Indicates the
number of
LOFD-001090 /
periodical
TDLOFD-001090
measurement
LOFD-001019 /
reports to be sent
TDLOFD-001019
after an inter-RAT
LOFD-001020 /
handover event is
TDLOFD-001020
triggered. It is used
LOFD-001021 /
to prevent the NO NO NO
TDLOFD-001021
impact of
TDLBFD-001022
measurement
TDLBFD-001023
report loss and
TDLBFD-001043
internal processing
TDLBFD-001072
failure on the
TDLBFD-001046
handover. For
TDLBFD-001073
details, see 3GPP
TS 36.331.
Indicates the
interval at which LOFD-001020 /
periodic TDLOFD-001020
measurement LOFD-001021
reports are sent to TDLOFD-001023
the eNodeB after TDLOFD-001033
NO NO NO
the event for inter- TDLOFD-001034
RAT handover to TDLOFD-001035
GERAN is TDLOFD-001019
triggered. TDLOFD-001046
For details, see TDLOFD-001073
3GPP TS 36.331.
stable, while the
ECN0 values may
vary with the
network load. The
value BOTH applies
only to UEs
complying with
3GPP Release 10.
For UEs complying
with 3GPP Release
8 or 9, the value
BOTH takes the
same effect as the
value RSCP. The
setting does not
take effect for
3GPP Release 8 LOFD-001019 /
and 9 UEs handed TDLOFD-001019
over based on LOFD-001022 /
NO NO NO
QOE, and the value TDLOFD-001022
ECN0 always takes LOFD-001033 /
effect on UEs TDLOFD-001033
complying with
3GPP Release 8 or
9.
If this parameter is
set to RSCP, the
eNodeB delivers
RSCP-based
UTRAN
measurement
configurations to
UEs. If this
parameter is set to
ECN0, the eNodeB
delivers ECN0-
based UTRAN
measurement

Indicates the
interval at which
periodical
measurement LOFD-001019 /
reports are sent TDLOFD-001019
NO NO NO
after the event for TDLOFD-001022
the handover to TDLOFD-001033
UTRAN is triggered.
For details, see
3GPP TS 36.331.
Indicates the
measurement
quantity required for LOFD-001090 /
the inter-RAT TDLOFD-001090
NO NO NO
handover to LOFD-001021 /
CDMA2000 1xRTT. TDLOFD-001021
For details, see
3GPP TS 36.331.

Indicates the
interval at which
periodic
measurement
reports are sent to LOFD-001090 /
the eNodeB after TDLOFD-001090
NO NO NO
the event for inter- LOFD-001021 /
RAT handover to TDLOFD-001021
CDMA2000 1xRTT
is triggered.
For details, see
3GPP TS 36.331.

Indicates the
measurement
quantity required for
the inter-RAT LOFD-001021 /
NO NO NO
handover to TDLOFD-001021
CDMA2000 HRPD.
For details, see
3GPP TS 36.331.
Indicates the
interval at which
periodic
measurement
reports are sent to
the eNodeB after LOFD-001021 /
NO NO NO
the event for inter- TDLOFD-001021
RAT handover to
CDMA2000 HRPD
is triggered.
For details, see
3GPP TS 36.331.

Indicates the trigger

quantity for event
A1/A2 of inter-RAT
measurement. The
quantity can be
RSRP, RSRQ, or
both RSRP and
RSRQ. The
LOFD-001019 /
measured RSRP
TDLOFD-001019
values are stable,
LOFD-001020 /
varying little with
TDLOFD-001020
the load, and NO NO NO
LOFD-001021 /
therefore there is
TDLOFD-001021
little signal
TDLOFD-001022
fluctuation. The
TDLOFD-001023
measured RSRQ
values vary with the
load and are likely
to reflect the signal
quality of the cell in
real time. For
details, see 3GPP
TS 36.331.
Indicates the type
of the inter-RAT LOFD-001019 /
handover event. TDLOFD-001019
The event type can LOFD-001020 /
be B1 or B2. This TDLOFD-001020
NO NO NO
parameter applies LOFD-001021 /
only to coverage- TDLOFD-001021
based handovers. TDLOFD-001022
For details, see TDLOFD-001023
3GPP TS 36.331.

Indicates the timer

for measurements LOFD-001090 /
NO NO NO
on CDMA2000 TDLOFD-001090
1xRTT cells.

Indicates the
number of
CDMA2000 1xRTT
cells whose
LOFD-001090 /
reference signal NO NO NO
TDLOFD-001090
strength is used to
calculate the target
reference signal
strength.

Indicates the mode

LOFD-001111
of selecting a
NO NO NO TDLOFD-001090
CDMA2000 HRPD
TDLOFD-001021
frequency.

Indicates the mode

LOFD-001035 /
of selecting a
NO NO NO TDLOFD-001035
CDMA2000 1xRTT
LOFD-001091
frequency.
Indicates whether
LOFD-001090 /
eCSFB is based on NO NO NO
TDLOFD-001090
redirection.

Indicates the
LOFD-001090 /
measurement mode NO NO NO
TDLOFD-001090
for eCSFB.

Indicates the mode LOFD-001035 /

of selecting a sector NO NO NO TDLOFD-001035
ID during eCSFB. TDLOFD-001090

Indicates the
maximum number
of UTRAN cell
system information LOFD-001019 /
messages that can NO NO NO TDLOFD-001019
be transmitted TDLOFD-001052
during a flash
redirection
procedure.

Indicates the
maximum number
of GERAN cell
system information LOFD-001020 /
messages that can NO NO NO TDLOFD-001020
be transmitted TDLOFD-001053
during a flash
redirection
procedure.

Indicates the
maximum number
of GERAN cell
system information
messages that can LOFD-001034 /
NO NO NO
be transmitted TDLOFD-001034
during a CSFB
emergency
redirection
procedure.
Indicates the
maximum number
of UTRAN cell
system information
LOFD-001033 /
messages that can
NO NO NO TDLOFD-001033
be transmitted
TDLOFD-001052
during a CSFB
emergency
redirection
procedure.

Indicates the
method of selecting
reference cells
during an optimized
handover from the
E-UTRAN to the
CDMA2000 eHRPD
network. One
method is selecting
reference cells LBFD-002018 /
NO NO NO
configured on the TDLBFD-002018
eNodeB. The other
method is selecting
CDMA2000 eHRPD
neighboring cells
with the best signal
quality. The signal
quality is included
in the measurement
report.
Indicates the PLMN
determination
mechanism used in
blind redirections
from E-UTRAN to
UTRAN/GERAN
when the PLMN for
LOFD-
the neighboring
001033/TDLOFD-
frequency (or
001033
frequency group) is
LOFD-
not configured. If
001034/TDLOFD-
this parameter is
001034
set to ON(On), the NO NO NO
LOFD-
PLMN for the
001019/TDLOFD-
neighboring
001019
frequency (or
LOFD-
frequency group) is
001020/TDLOFD-
the serving PLMN
001020
of the UE. If this
parameter is set to
OFF(Off), the
frequency (or
frequency group)
does not belong to
any PLMNs.

Indicates the
maximum number
LBFD-00201801 /
of cells to be
TDLBFD-00201801
included in the
LBFD-00201802 /
measurement
TDLBFD-00201802
report after an intra-
LBFD-00201804 /
RAT inter-frequency
TDLBFD-00201804
or intra-RAT intra-
LBFD-00201805 /
frequency
NO NO NO TDLBFD-00201805
measurement event
TDLBFD-002018
for handover
TDLBFD-001022
purposes or a
TDLBFD-001023
periodic intra-RAT
TDLBFD-001033
measurement for
TDLBFD-001034
ANR purposes is
TDLBFD-001035
triggered. For
TDLBFD-001019
details, see 3GPP
TS 36.331.
Indicates the
number of
periodical LBFD-00201801 /
measurement TDLBFD-00201801
reports to be sent LBFD-00201802 /
after an event for TDLBFD-00201801
the intra- or inter- LBFD-00201804 /
frequency handover TDLBFD-00201801
within the E-UTRAN LBFD-00201804 /
is triggered. NO NO NO TDLBFD-00201801
It is used to prevent TDLBFD-002018
the impact of TDLBFD-001022
measurement TDLBFD-001023
report loss and TDLBFD-001033
internal processing TDLBFD-001034
failure on the TDLBFD-001035
handover. For TDLBFD-001019
details, see 3GPP
TS 36.331.

Indicates the
quantity used to
evaluate the
triggering condition
for the intra-
frequency handover
event. The quantity
can be RSRP or
RSRQ.
The measured
RSRP values are
stable, varying little LBFD-00201801 /
NO NO NO
with the load, and TDLBFD-00201801
therefore there is
little signal
fluctuation. The
measured RSRQ
values vary with the
load and are likely
to reflect the signal
quality of the cell in
real time.
For details, see
3GPP TS 36.331.
measurement
report for the intra-
frequency handover
event. The quantity
can be RSRP,
RSRQ, or both.
The measured
RSRP values are
stable, varying little
with the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
values vary with the
load and are likely
to reflect the signal
quality of the cell in
real time. Even LBFD-00201801 /
NO NO NO
when this TDLBFD-00201801
parameter is set to
BOTH, the eNodeB
triggers a handover
based on the
setting of the
IntraFreqHoA3Trig
Quan
parameter.The
value of this
parameter is also
used as the
quantity to be
included in the
measurement
report between A3-
related inter-
frequency
measurement
Indicates the
interval between
periodic
measurement
reports that are
sent after an intra-
frequency handover
LBFD-00201801 /
is triggered. The
TDLBFD-00201801
value of this NO NO NO
LOFD-001032 /
parameter is also
TDLOFD-001032
used as the interval
between A3-related
inter-frequency
measurement
reports.
For details, see
3GPP TS 36.331.
Indicates the
quantity to be
included in the
measurement
report for inter-
frequency handover
events. The
quantity can be
RSRP, RSRQ, or
both. The measured
RSRP values are
LBFD-00201802 /
stable, slightly
TDLBFD-00201802
varying with the
LBFD-00201804 /
load, and therefore NO NO NO
TDLBFD-00201804
there is little signal
LBFD-00201805 /
fluctuation. The
TDLBFD-00201805
measured RSRQ
values vary with the
load and are likely
to reflect the signal
quality of the cell in
real time. This
parameter applies
to measurements
for event A4/A5. For
details, see 3GPP
TS 36.331.

Indicates the
interval at which
periodical
measurement
reports are sent
NO NO
after an inter-
frequency handover
event is triggered.
For details, see
3GPP TS 36.331.
LBFD-00201802 /
TDLBFD-00201802
LBFD-00201804 /
NO
TDLBFD-00201804
LBFD-00201805 /
TDLBFD-00201805
Indicates whether
RSRP or RSRQ is
measured for
events A1 and A2
that are used for
inter-frequency
handovers based
on event A4 or A5.
RSRP
measurements
slightly vary with the LBFD-00201802 /
NO NO NO
load, and there is TDLBFD-00201802
little signal
fluctuation. By
contrast, RSRQ
measurements vary
with the load and
are likely to reflect
the signal quality of
the cell in real time.
For details, see
3GPP TS 36.331.

Indicates the trigger

quantity for events
A1/A2 of frequency-
priority based inter-
frequency
handover. The
quantity can be
either RSRP or
RSRQ. The
measured RSRP
values are stable,
varying little with
NO NO NO None
the load, and
therefore there is
little signal
fluctuation. The
measured RSRQ
values vary with the
load and are likely
to reflect the signal
quality of the cell in
real time. For
details, see 3GPP
TS 36.331.
Indicates the trigger
quantity for event
A4/A5
LBFD-00201802 /
measurement
TDLBFD-00201802
reports of all inter-
NO NO NO LOFD-00109804 /
frequency
TDLAOFD-
handovers except
00100306
coverage-based
inter-frequency
handover.

Indicates the timer

for the eNodeB to
wait for more
measurement
reports to
determine whether
LBFD-00201802 /
to perform a NO NO NO
TDLBFD-00201802
coverage-based
inter-frequency
handover after the
eNodeB receives a
measurement
report.

Indicates the trigger

quantity for events
A1/A2 of A3 based
inter-frequency
handover. The
quantity can be
either RSRP or
RSRQ. The
measured RSRP
values are stable,
varying little with
the load, and LBFD-00201802 /
NO NO NO
therefore there is TDLBFD-00201802
little signal
fluctuation. The
measured RSRQ
values fluctuate
greatly with the load
and therefore
reflect the signal
quality of the cell in
real time. For
details, see 3GPP
TS 36.331.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
UTRAN. When CS
fallback to UTRAN
is applicable, this
parameter is set for
UEs and used in
the evaluation of
whether to trigger
event B1. When
detecting that the
signal quality in at
least one UTRAN
cell meets the
entering condition,
the UE does not
send a
measurement
report to the
eNodeB
immediately. LOFD-001033 /
NO NO NO
Instead, the UE TDLOFD-001033
sends a report only
when the signal
quality continuously
meets the entering
condition during the
time-to-trigger. This
parameter helps
decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong
handovers, and
thus helps to
prevent
GERAN. When CS
fallback to GERAN
is applicable, this
parameter is set for
UEs and used in
the evaluation of
whether to trigger
event B1. When
detecting that the
signal quality in at
least one GERAN
cell meets the
entering condition,
the UE does not
send a
measurement
report to the
eNodeB
immediately. LOFD-001034 /
NO NO NO
Instead, the UE TDLOFD-001034
sends a report only
when the signal
quality continuously
meets the entering
condition during the
time-to-trigger. This
parameter helps
decrease the
number of
occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong
handovers, and
thus helps to
prevent
CDMA2000. When
CS fallback to
CDMA2000 is
applicable, this
parameter is set for
UEs and used in
the evaluation of
whether to trigger
event B1. When
detecting that the
signal quality in at
least one
CDMA2000 cell
meets the entering
condition, the UE
does not send a
measurement
report to the
LOFD-001090 /
eNodeB
NO NO NO TDLOFD-001090
immediately.
TDLOFD-001088
Instead, the UE
sends a report only
when the signal
quality continuously
meets the entering
condition during the
time-to-trigger. This
parameter helps
reduce the number
of occasionally
triggered event
reports, the
average number of
handovers, and the
number of wrong
handovers, and
hence helps to
prevent
Indicates the RSCP
threshold for event
B1, which is used in
CS fallback to
UTRAN. When CS
fallback to UTRAN
is applicable, this
parameter is set for
UEs and used in
the evaluation
about whether to
trigger event B1.
This parameter
indicates the RSCP
requirement for the
LOFD-001033 /
UTRAN cells to be NO NO NO
TDLOFD-001033
included in the
measurement
report. A UE sends
a measurement
report related to
event B1 to the
eNodeB when the
RSCP in at least
one UTRAN cell
exceeds this
threshold and other
triggering
conditions are met.
For details, see
3GPP TS 36.331.
UTRAN. When CS
fallback to UTRAN
is required, this
parameter is set for
UEs and used in
the evaluation
about whether to
trigger event B1.
This parameter
indicates the Ec/N0
requirement for the
UTRAN cells to be
included in the
measurement
report. A UE sends
a measurement
report related to
event B1 to the
eNodeB when the LOFD-001033 /
NO NO NO
Ec/N0 in at least TDLOFD-001033
one UTRAN cell
exceeds this
threshold and other
triggering
conditions are met.
For a cell with large
signal fading
variance, set this
parameter to a
large value to
prevent
unnecessary
handovers. For a
cell with small
signal fading
variance, set this
parameter to a
small value to
Indicates the RSSI
threshold for event
B1 that is used in
CS fallback to
GERAN. A UE
sends a
measurement
report related to
event B1 to the LOFD-001034 /
NO NO NO
eNodeB when the TDLOFD-001034
RSSI in at least one
GERAN cell
exceeds this
threshold and other
triggering
conditions are met.
For details, see
3GPP TS 36.331.
Indicates the pilot
strength threshold
related to event B1,
which is used in CS
fallback to
CDMA2000. A UE
sends a
measurement
report related to
LOFD-001090 /
event B1 to the
NO NO NO TDLOFD-001090
eNodeB when the
TDLOFD-001088
pilot strength in at
least one
CDMA2000 cell
exceeds this
threshold and other
triggering
conditions are met.
For details, see
3GPP TS 36.331.

Indicates the
reference signal
received power
(RSRP) threshold
for event A1
associated with
CSFB-triggered
adaptive blind
handovers. This
parameter is set for
a UE as a triggering
condition of event
A1 measurement
related to a CSFB-
triggered adaptive LOFD-001052 /
blind handover. This TDLOFD-001052
NO NO NO
parameter specifies LOFD-001053 /
the RSRP threshold TDLOFD-001053
of the serving cell
above which a
CSFB-triggered
adaptive blind
handover is
triggered. If the
RSRP value
measured by a UE
exceeds this
threshold, the UE
submits a
measurement
report related to
event A1.
Indicates the timer
governing the
period in which only LOFD-001033 /
CSFB can be TDLOFD-001033
performed . After LOFD-001033 /
NO NO NO
the timer expires, TDLOFD-001034
the eNodeB LOFD-001033 /
performs a blind TDLOFD-001090
redirection for the
UE.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates whether
to configure the LBFD-002009 /
NO NO NO
access barring TDLBFD-002009
information.
Indicates the
emergency call
barring status of
access class 10,
indicating whether
UEs of access class
10 can initiate
emergency calls.
If this parameter is
set to
BOOLEAN_TRUE,
UEs of access
classes 0 to 9 or
those without IMSIs
cannot initiate
emergency calls. If
this parameter is
set to
BOOLEAN_FALSE, LBFD-002028 /
NO NO NO
UEs of access TDLBFD-002028
classes 0 to 9 and
those without IMSIs
can initiate
emergency calls.
A UE in access
classes 11 to 15
cannot initiate
emergency calls
only when its
access class and
access class 10 are
both barred. If its
access class or
access class 10 is
not barred,
emergency calls
initiated by the UE
are granted access.

Indicates whether
to configure the
access barring LBFD-002009 /
NO NO NO
information for TDLBFD-002009
mobile-originated
calls.
Indicates the
access probability
factor for mobile-
originated calls. A
mobile-originated
call is granted
access if the
random number
generated by the
UE is less than this
access probability
factor; otherwise,
the access request
is rejected.
According to 3GPP
TS 36.331, if any of
the parameters
AC11BarforCall, LBFD-002009 /
NO NO NO
AC12BarforCall, TDLBFD-002009
AC13BarforCall,
AC14BarforCall,
and AC15BarforCall
is set to
BOOLEAN_TRUE,
the eNodeB sends
UEs P00 as the
access probability
factor for mobile-
originated calls in
the system
information block
type 2 (SIB2),
regardless of the
actual setting of the
AcBarringFactorFor
Call parameter.

Indicates the
average access
LBFD-002009 /
barring duration for NO NO NO
TDLBFD-002009
mobile-originated
calls.
Indicates the
mobile-originated
call barring status
of access class 11,
indicating whether
UEs of access class
11 can initiate
mobile-originated
calls.
If this parameter is
set to LBFD-002009 /
NO NO NO
BOOLEAN_TRUE, TDLBFD-002009
UEs of access class
11 cannot initiate
mobile-originated
calls. If this
parameter is set to
BOOLEAN_FALSE,
UEs of access class
11 can initiate
mobile-originated
calls.

Indicates the
mobile-originated
call barring status
of access class 12,
indicating whether
UEs of access class
12 can initiate
mobile-originated
calls.
If this parameter is
set to LBFD-002009 /
NO NO NO
BOOLEAN_TRUE, TDLBFD-002009
UEs of access class
12 cannot initiate
mobile-originated
calls. If this
parameter is set to
BOOLEAN_FALSE,
UEs of access class
12 can initiate
mobile-originated
calls.
Indicates the
mobile-originated
call barring status
of access class 13,
indicating whether
UEs of access class
13 can initiate
mobile-originated
calls.
If this parameter is
set to LBFD-002009 /
NO NO NO
BOOLEAN_TRUE, TDLBFD-002009
UEs of access class
13 cannot initiate
mobile-originated
calls. If this
parameter is set to
BOOLEAN_FALSE,
UEs of access class
13 can initiate
mobile-originated
calls.

Indicates the
mobile-originated
call barring status
of access class 14,
indicating whether
UEs of access class
14 can initiate
mobile-originated
calls.
If this parameter is
set to LBFD-002009 /
NO NO NO
BOOLEAN_TRUE, TDLBFD-002009
UEs of access class
14 cannot initiate
mobile-originated
calls. If this
parameter is set to
BOOLEAN_FALSE,
UEs of access class
14 can initiate
mobile-originated
calls.
Indicates the
mobile-originated
call barring status
of access class 15,
indicating whether
UEs of access class
15 can initiate
mobile-originated
calls.
If this parameter is
set to LBFD-002009 /
NO NO NO
BOOLEAN_TRUE, TDLBFD-002009
UEs of access class
15 cannot initiate
mobile-originated
calls. If this
parameter is set to
BOOLEAN_FALSE,
UEs of access class
15 can initiate
mobile-originated
calls.

Indicates whether
to configure the
LBFD-002009 /
access barring NO NO NO
TDLBFD-002009
information for
signaling.
Indicates the
access probability
factor for signaling.
Signaling from a UE
is granted access if
the random number
generated by the
UE is less than this
access probability
factor; otherwise,
the access request
is rejected.
According to 3GPP
TS 36.331, if any of
the parameters
AC11BarForSig,
LBFD-002009 /
AC12BarForSig, NO NO NO
TDLBFD-002009
AC13BarForSig,
AC14BarForSig,
and AC15BarForSig
is set to
BOOLEAN_TRUE,
the eNodeB sends
UEs P00 as the
access probability
factor for signaling
in the system
information block
type 2 (SIB2),
regardless of the
actual setting of the
AcBarringFactorFor
Sig parameter.

Indicates the
average access LBFD-002009 /
NO NO NO
barring duration for TDLBFD-002009
signaling.
Indicates the
signaling barring
status of access
class 11, indicating
whether UEs of
access class 11 can
initiate signaling
access.
If this parameter is
set to LBFD-002009 /
NO NO NO
BOOLEAN_TRUE, TDLBFD-002009
UEs of access class
11 cannot initiate
signaling access. If
this parameter is
set to
BOOLEAN_FALSE,
UEs of access class
11 can initiate
signaling access.

Indicates the
signaling barring
status of access
class 12, indicating
whether UEs of
access class 12
can initiate
signaling access.
If this parameter is
set to LBFD-002009 /
NO NO NO
BOOLEAN_TRUE, TDLBFD-002009
UEs of access class
12 cannot initiate
signaling access. If
this parameter is
set to
BOOLEAN_FALSE,
UEs of access class
12 can initiate
signaling access.
Indicates the
signaling barring
status of access
class 13, indicating
whether UEs of
access class 13
can initiate
signaling access.
If this parameter is
set to LBFD-002009 /
NO NO NO
BOOLEAN_TRUE, TDLBFD-002009
UEs of access class
13 cannot initiate
signaling access. If
this parameter is
set to
BOOLEAN_FALSE,
UEs of access class
13 can initiate
signaling access.

Indicates the
signaling barring
status of access
class 14, indicating
whether UEs of
access class 14
can initiate
signaling access.
If this parameter is
set to LBFD-002009 /
NO NO NO
BOOLEAN_TRUE, TDLBFD-002009
UEs of access class
14 cannot initiate
signaling access. If
this parameter is
set to
BOOLEAN_FALSE,
UEs of access class
14 can initiate
signaling access.
Indicates the
signaling barring
status of access
class 15, indicating
whether UEs of
access class 15
can initiate
signaling access.
If this parameter is
set to LBFD-002009 /
NO NO NO
BOOLEAN_TRUE, TDLBFD-002009
UEs of access class
15 cannot initiate
signaling access. If
this parameter is
set to
BOOLEAN_FALSE,
UEs of access class
15 can initiate
signaling access.

Indicates whether
to configure the
access barring
LBFD-002009 /
information for NO NO NO
TDLBFD-002009
multimedia
telephony (MMTEL)
voice services.
Indicates the
access probability
factor for
multimedia
telephony (MMTEL)
voice services. An
MMTEL voice
service is granted LBFD-002009 /
NO NO NO
access if the TDLBFD-002009
random number
generated by the
UE is less than this
access probability
factor; otherwise,
the access request
is barred.

Indicates the
average access
barring time of LBFD-002009 /
NO NO NO
multimedia TDLBFD-002009
telephony (MMTEL)
voice services.
telephony (MMTEL)
voice services
initiated by UEs of
AC 11 to AC 15 are
granted access.
AC11BARSTATE: If
this option is
selected, the
MMTEL voice
services initiated by
UEs of AC 11 in idle
mode are barred.
AC12BARSTATE: If
this option is
selected, the
MMTEL voice
services initiated by
UEs of AC 12 in idle
mode are barred. LBFD-002009 /
NO NO NO
AC13BARSTATE: If TDLBFD-002009
this option is
selected, the
MMTEL voice
services initiated by
UEs of AC 13 in idle
mode are barred.
AC14BARSTATE: If
this option is
selected, the
MMTEL voice
services initiated by
UEs of AC 14 in idle
mode are barred.
AC15BARSTATE: If
this option is
selected, the
MMTEL voice
services initiated by

Indicates whether
to configure the
access barring
LBFD-002009 /
information for NO NO NO
TDLBFD-002009
multimedia
telephony (MMTEL)
video services.
Indicates the
access probability
factor for
multimedia
telephony (MMTEL)
video services. An
MMTEL video
service is granted LBFD-002009 /
NO NO NO
access if the TDLBFD-002009
random number
generated by the
UE is less than this
access probability
factor; otherwise,
the access request
is barred.

Indicates the
average access
barring time of LBFD-002009 /
NO NO NO
multimedia TDLBFD-002009
telephony (MMTEL)
video services.
telephony (MMTEL)
video services
initiated by UEs of
AC 11 to AC 15 are
granted access.
AC11BARSTATE: If
this option is
selected, the
MMTEL video
services initiated by
UEs of AC 11 in idle
mode are barred.
AC12BARSTATE: If
this option is
selected, the
MMTEL video
services initiated by
UEs of AC 12 in idle
mode are barred. LBFD-002009 /
NO NO NO
AC13BARSTATE: If TDLBFD-002009
this option is
selected, the
MMTEL video
services initiated by
UEs of AC 13 in idle
mode are barred.
AC14BARSTATE: If
this option is
selected, the
MMTEL video
services initiated by
UEs of AC 14 in idle
mode are barred.
AC15BARSTATE: If
this option is
selected, the
MMTEL video
services initiated by

Indicates whether
to configure the
access barring LBFD-002009 /
NO NO NO
information for CS TDLBFD-002009
fallback (CSFB)
services.
Indicates the
access probability
factor for CS
fallback (CSFB)
services. If the
random number
generated by a UE
LBFD-002009 /
is less than the NO NO NO
TDLBFD-002009
parameter value,
the eNodeB
accepts the CSFB
service access
request; otherwise,
the eNodeB rejects
the access request.

Indicates the
average access
LBFD-002009 /
barring time of CS NO NO NO
TDLBFD-002009
fallback (CSFB)
services.
Indicates whether
CS fallback (CSFB)
services initiated by
UEs of AC 11 to AC
15 are granted
access.
AC11BARSTATE: If
this option is
selected, the CSFB
services initiated by
UEs of AC 11 in idle
mode are barred.
AC12BARSTATE: If
this option is
selected, the CSFB
services initiated by
UEs of AC 12 in idle
mode are barred. LBFD-002009 /
NO NO NO
AC13BARSTATE: If TDLBFD-002009
this option is
selected, the CSFB
services initiated by
UEs of AC 13 in idle
mode are barred.
AC14BARSTATE: If
this option is
selected, the CSFB
services initiated by
UEs of AC 14 in idle
mode are barred.
AC15BARSTATE: If
this option is
selected, the CSFB
services initiated by
UEs of AC 15 in idle
mode are barred.
services, MMTEL
voice services, or
short messages
during access class
control. This
parameter takes
effect only when the
AcBarforVoLTEPref
erSwitch option of
the VoLTESwitch
parameter in the
CellAlgoSwitch MO
is selected.
MMTELVoicePrefer
CfgInd: If this option
is selected,
eNodeBs allow
preferential
LOFD-110219 /
accesses for NO NO NO
TDLOFD-110219
MMTEL voice
services during
access class
control.
MMTELVideoPrefer
CfgInd: If this option
is selected,
eNodeBs allow
preferential
accesses for
MMTEL video
services during
access class
control.
SMSPreferCfgInd:
If this option is
selected, eNodeBs
allow preferential
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates whether
the cell is barred. If
the cell is barred,
the UE cannot LOFD-002012 /
camp on the TDLOFD-002012
NO NO NO
serving cell. During LBFD-002009 /
cell reselection, the TDLBFD-002009
serving cell is not
selected as a
candidate cell.
Indicates whether
the cell can initiate
the intra-frequency
cell reselection
when the cell is
barred.
LBFD-002009 /
NOT_ALLOWED
TDLBFD-002009
means that the UE
NO NO NO LBFD-
cannot initiate the
00201803/TDLBFD
intra-frequency cell
-00201803
reselection, and
ALLOWED means
that the UE can
initiate the intra-
frequency cell
reselection.

certain cells on the

live network are in
RAN sharing with
common carriers
mode or in hybrid
RAN sharing mode
and at least one of
these cells uses the
round robin mode,
NBSLTEPLMNRou
ndSwitch under the
RanSharingAnrSwit
ch parameter must
be selected for
eNodeBs whose
cells are configured
as neighboring cells LOFD-001036 /
for the local cell. TDLOFD-001036
Otherwise, the local NO NO NO LBFD-002009 /
eNodeB may TDLBFD-002009
experience failures LOFD-070206
in handing over
UEs from the local
cell to an ANR-
established
neighboring cell
that is in round
robin mode. If this
parameter is set to
NORMAL_MODE,
the cell does not
broadcast PLMN-
specific information
in round robin
mode. If this
parameter is set to
RR_MODE, the cell
LOFD-001036 /
Indicates the TDLOFD-001036
changing period of NO NO NO LBFD-002009 /
cell PLMN. TDLBFD-002009
LOFD-070206
Indicates the start
time for
LOFD-001036 /
broadcasting
NO NO NO TDLOFD-001036
PLMN-specific
LOFD-070206
information in round
robin mode.

Indicates whether
all synchronization
procedures
repeatedly initiated
by a UE having
compatibility
problems can
trigger the RRC
connection
reconfiguration
procedure. If this
parameter is set to
CFG, all
synchronization
procedures
repeatedly initiated
by a UE having LOFD-001105 /
NO NO NO
compatibility TDLOFD-001105
problems do not
trigger the RRC
connection
reconfiguration
procedure. If this
parameter is set to
NOT_CFG, all
synchronization
procedures
repeatedly initiated
by a UE having
compatibility
problems trigger the
RRC connection
reconfiguration
procedure.
Indicates the period
during which
synchronization
procedures
repeatedly initiated
by a UE having
compatibility
problems do not
trigger the RRC
connection
reconfiguration
LOFD-001105 /
procedure. Multiple NO NO NO
TDLOFD-001105
synchronization
procedures initiated
by a UE having
compatibility
problems within the
period specified by
this parameter
trigger only one
RRC connection
reconfiguration
procedure.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within a base
station.

Indicates the local

tracking area
identity of the cell,
which uniquely
identifies an
operator's record of
tracking area LBFD-002009 /
information within a TDLBFD-002009
YES YES NO
cell. This parameter LBFD-00201803 /
is used only in the TDLBFD-00201803
eNodeB and is
different from the
tracking area
identity configured
in the tracking area
list on the MME.
Indicates whether
the cell is reserved
for operator use.
If this parameter is
set to
CELL_RESERVED
_FOR_OP, the cell
is reserved for
operator use. UEs
of AC11 or AC15 in
their HPLMN or
EHPLMN can
consider this cell as
a candidate cell for
cell selection or
reselection. UEs of
AC11 or AC15
outside their
LBFD-002009 /
HPLMN/EHPLMN NO NO NO
TDLBFD-002009
and UEs of AC0-
9/AC12-14 consider
this cell as a barred
cell during cell
selection or
reselection.
If this parameter is
set to
CELL_NOT_RESE
RVED_FOR_OP,
the cell is not
reserved for
operator use. All
UEs can consider
this cell as a
candidate cell for
cell selection or
reselection.
Indicates the
percentage of
resource blocks
(RBs) occupied by
the operator on the
physical uplink
shared channel
(PUSCH) when
radio access
network (RAN)
sharing is enabled
on the eNodeB and
the cell-level RAN
sharing switch is
turned on. If the
data volume is
sufficient, the LOFD-001036 /
percentage of RBs TDLOFD-001036
occupied by each NO NO NO LBFD-002009 /
operator will reach TDLBFD-002009
the preset value. LOFD-070206
Modifications on
this parameter
affect the
percentage of RBs
occupied by
operators on the
PUSCH. This
parameter takes
effect only in RAN
sharing with
common carriers
mode or in hybrid
RAN sharing mode
with more than one
CellOp MO being
configured.
Indicates the
percentage of
resource blocks
(RBs) occupied by
the operator on the
physical downlink
shared channel
(PDSCH) when
RAN sharing is
enabled on the
eNodeB and the
cell-level RAN
sharing switch is
turned on. If the
data volume is
sufficient, the
LOFD-001036 /
percentage of RBs
TDLOFD-001036
occupied by each
NO NO NO LBFD-002009 /
operator will reach
TDLBFD-002009
the preset value.
LOFD-070206
Modifications on
this parameter
affect the
percentage of RBs
occupied by
operators on the
PDSCH. This
parameter takes
effect only in RAN
sharing with
common carriers
mode or in hybrid
RAN sharing mode
with more than one
CellOp MO being
configured.
number of MMEs
configured for a
cell. This parameter
specifies whether to
support the
TDD/FDD cell
configured with
dedicated MME
scenario.
When this
parameter is set to
0, the TDD/FDD cell
configured with
dedicated MME
scenario is not
supported, and no
MME can be
configured for a
cell. LOFD-001018 /
NO NO NO
When this TDLOFD-001018
parameter is set to
a value between 1
and 4, the
TDD/FDD cell
configured with
dedicated MME
scenario is
supported, and the
number of MMEs
for a cell can be
configured
according to the
parameter value.
An MME is uniquely
specified by the
MME group
identifier (MMEGI)
and MME code
a cell. This
parameter can be
configured only
when the
MMECfgNum
parameter is
greater than or
equal to 1.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link LOFD-001018 /
NO NO NO
between an MME TDLOFD-001018
configured for a cell
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
configured for a cell
cannot establish S1
links to the eNodeB
a cell. This
parameter can be
configured only
when the
MMECfgNum
parameter is
greater than or
equal to 1.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link LOFD-001018 /
NO NO NO
between an MME TDLOFD-001018
configured for a cell
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
configured for a cell
cannot establish S1
links to the eNodeB
configured for a
cell. This parameter
can be configured
only when the
MMECfgNum
parameter is
greater than or
equal to 2.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link LOFD-001018 /
NO NO NO
between an MME TDLOFD-001018
configured for a cell
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
configured for a cell
cannot establish S1
links to the eNodeB
configured for a
cell. This parameter
can be configured
only when the
MMECfgNum
parameter is
greater than or
equal to 2.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link LOFD-001018 /
NO NO NO
between an MME TDLOFD-001018
configured for a cell
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
configured for a cell
cannot establish S1
links to the eNodeB
a cell. This
parameter can be
configured only
when the
MMECfgNum
parameter is
greater than or
equal to 3.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link LOFD-001018 /
NO NO NO
between an MME TDLOFD-001018
configured for a cell
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
configured for a cell
cannot establish S1
links to the eNodeB
a cell. This
parameter can be
configured only
when the
MMECfgNum
parameter is
greater than or
equal to 3.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link LOFD-001018 /
NO NO NO
between an MME TDLOFD-001018
configured for a cell
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
configured for a cell
cannot establish S1
links to the eNodeB
configured for a
cell. This parameter
can be configured
only when the
MMECfgNum
parameter is equal
to 4.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link
LOFD-001018 /
between an MME NO NO NO
TDLOFD-001018
configured for a cell
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
configured for a cell
cannot establish S1
links to the eNodeB
a cell. This
parameter can be
configured only
when the
MMECfgNum
parameter is equal
to 4.
When setting this
parameter, ensure
that the globally
unique MME
identifier
(GUMMEI),
consisting of the
PLMN, MMEGI, and
MMEC, must be
unique.
The S1 link
LOFD-001018 /
between an MME NO NO NO
TDLOFD-001018
configured for a cell
and the eNodeB
supporting the cell
must be available,
and the GUMMEI of
the MME must be
specified in the
ServedGummeis
parameter of the
S1Interface MO.
Otherwise, the cell
cannot broadcast
the PLMN in system
information.
If all MMEs
configured for a cell
cannot establish S1
links to thethe
Indicates eNodeB
percentage of
activated UEs
served by the
operator in a cell
when inter-
frequency load
balancing and RAN
LOFD-001032 /
sharing are NO NO NO
TDLOFD-001032
enabled.
Modifications on
this parameter
affect the
percentage of
activated UEs
served by
operators.
Indicates the upper
usage threshold of
the uplink PRBs
that an operator
allocates to PTT
services in a cell.
Based on the
parameter value,
the eNodeB LOFD-081218 /
NO NO NO
determines whether TDLOFD-110230
to admit PTT
services in the
uplink. If the uplink
PRB usage of PTT
services is greater
than the parameter
value, PTT services
are not admitted.

Indicates the lower

usage threshold of
the uplink PRBs
that an operator
allocates to PTT
services in a cell.
Based on the
parameter value,
the eNodeB LOFD-081218 /
NO NO NO
determines whether TDLOFD-110230
to admit PTT
services in the
uplink. If the uplink
PRB usage of PTT
services is less than
the parameter
value, PTT services
are admitted.
Indicates the upper
usage threshold of
the downlink PRBs
that an operator
allocates to PTT
services in a cell.
Based on the
parameter value,
the eNodeB
determines whether LOFD-081218 /
NO NO NO
to admit PTT TDLOFD-110230
services in the
downlink. If the
downlink PRB
usage of PTT
services is greater
than the value of
this parameter, PTT
services are not
admitted.

Indicates the lower

usage threshold of
the downlink PRBs
that an operator
allocates to PTT
services in a cell.
Based on the
parameter value,
the eNodeB
LOFD-081218 /
determines whether NO NO NO
TDLOFD-110230
to admit PTT
services in the
downlink. If the
downlink PRB
usage of PTT
services is less than
the parameter
value, PTT services
are admitted.

Indicates the
operator index that
is broadcast in the NO NO YES None
cell system
information.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the
hysteresis for cell
reselection when
RSRP values are
used in the
evaluation. This
parameter must be
set based on the
slow fading
characteristic of the
area covered by the
LBFD-00201803 /
cell. The greater the
TDLBFD-00201803
slow fading NO NO NO
LBFD-002009 /
variance is, the
TDLBFD-002009
larger the value of
this parameter must
be set to. A larger
value of the
hysteresis results in
a larger boundary
of the serving cell
and a higher
probability of cell
reselection to
neighboring cells.

Indicates whether
LBFD-00201803 /
to set the
TDLBFD-00201803
parameters related NO NO NO
LBFD-002009 /
to speed-dependent
TDLBFD-002009
cell reselection.

Indicates the
duration in which
the mobility status
of the UE is
evaluated. This
parameter is one of
the key parameters
in deciding on the
LBFD-002009 /
UE mobility. A
TDLBFD-002009
smaller value of this NO NO NO
LBFD-00201803 /
parameter may lead
TDLBFD-00201803
to more frequent
switching among
mobility status and
lower decision
accuracy. A larger
value of this
parameter leads to
the opposite effect.
Indicates the extra
duration required in
the evaluation
before the UE can
enter the normal-
mobility state. This
parameter can
prevent UEs from
frequently switching
from the high- or
medium-mobility
state to the normal-
mobility state, and
is one of the key LBFD-002009 /
parameters in TDLBFD-002009
NO NO NO
deciding on the UE LBFD-00201803 /
mobility. A larger TDLBFD-00201803
value of this
parameter leads to
a lower probability
of transition from
the high- or
medium-mobility
state to the normal-
mobility state but
higher decision
accuracy. A smaller
value of this
parameter leads to
the opposite effect.

Indicates the
threshold of the
number of cell
reselections, which
is used for a UE to
enter the medium
mobility state. This
parameter is one of
the key parameters
in determining the
mobility state of the LBFD-00201803 /
UE. During the UE TDLBFD-00201803
NO NO NO
mobility evaluation, LBFD-002009 /
if the number of cell TDLBFD-002009
reselections is
greater than this
parameter value
and is less than or
equal to the
NCellChangeHigh
parameter value,
the UE enters the
medium mobility
state.
Indicates the
threshold of the
number of cell
reselections, which
is used for a UE to
enter the high
mobility state. This
parameter is one of
LBFD-00201803 /
the key parameters
TDLBFD-00201803
in determining the NO NO NO
LBFD-002009 /
mobility state of the
TDLBFD-002009
UE. During the UE
mobility evaluation,
if the number of cell
reselections is
greater than this
parameter value,
the UE enters the
high mobility state.

Indicates the
scaling factor (or
known as additional
hysteresis) applied LBFD-002009 /
to Qhyst for TDLBFD-002009
NO NO NO
medium-mobility LBFD-00201803 /
UEs. For details, TDLBFD-00201803
see 3GPP TS
36.304 and 3GPP
TS 36.331.

Indicates the
scaling factor (or
known as additional
LBFD-002009 /
hysteresis) applied
TDLBFD-002009
to Qhyst for high- NO NO NO
LBFD-00201803 /
mobility UEs. For
TDLBFD-00201803
details, see 3GPP
TS 36.304 and
3GPP TS 36.331.
Indicates whether
to set the
measurement
triggering threshold
for reselection to
inter-frequency or
inter-RAT cells. If LBFD-00201803 /
this parameter is TDLBFD-00201803
NO NO NO
set to NOT_CFG, LBFD-002009 /
the UE continuously TDLBFD-002009
measures intra-
frequency or inter-
RAT cells,
irrespective of the
signal quality of the
serving cell.

Indicates the
measurement
triggering threshold
for reselection to
inter-frequency or
inter-RAT cells. If
the cell reselection
priority of a
frequency or RAT is
higher than that of
the serving
frequency, the UEs
always start inter-
frequency or inter-
RAT
measurements. If
the cell reselection LBFD-00201803 /
priority of a TDLBFD-00201803
NO NO NO
frequency is lower LBFD-002009 /
than or equal to that TDLBFD-002009
of the serving
frequency or if the
cell reselection
priority of an RAT is
lower than that of
the serving
frequency, the UEs
start inter-frequency
or inter-RAT
measurements only
when the value of
Cell selection RX
level value (dB) is
lower than or equal
to the value of this
parameter.
Indicates the
threshold used in
the evaluation of
reselection to a cell
on a lower priority
E-UTRAN
frequency or on an
inter-RAT
frequency. Cell
reselection to a cell
on a lower priority
LBFD-00201803 /
E-UTRAN
TDLBFD-00201803
frequency or on an NO NO NO
LBFD-002009 /
inter-RAT frequency
TDLBFD-002009
is performed if no
cell on the serving
frequency or on a
higher priority E-
UTRAN frequency
fulfills criteria 1 for
inter-frequency and
inter-RAT
reselections. For
details, see 3GPP
TS 36.304.

Indicates the cell

reselection priority
of the serving
frequency. 0
indicates the lowest
priority. The value
of this parameter
must be determined
LBFD-00201803 /
together with the
TDLBFD-00201803
priorities of other NO NO NO
LBFD-002009 /
frequencies during
TDLBFD-002009
the network
planning.
Frequencies used
for different RATs
must be assigned
different cell
reselection
priorities.
Indicates the
minimum required
RX level used in
intra-frequency E-
UTRAN cell
reselection, which
corresponds to the LBFD-00201803 /
IE q-RxLevMin in TDLBFD-00201803
NO NO NO
SIB3. This value is LBFD-002009 /
included in the cell TDLBFD-002009
reselection criteria
and used in the
evaluation of cell
reselection. For
details, see 3GPP
TS 36.304.

Indicates whether
to configure the
maximum TX power
of the UE in the
intra-frequency LBFD-00201803 /
neighboring cell. If TDLBFD-00201803
NO NO NO
the value of this LBFD-002009 /
parameter is not TDLBFD-002009
specified, the
maximum power is
subject to the UE
capability.
Indicates the
maximum power
that the UE can
apply to
transmission in the
intra-frequency
neighboring cell. It
is used in cell
LBFD-00201803 /
reselection criteria
TDLBFD-00201803
to calculate the NO NO NO
LBFD-002009 /
compensated
TDLBFD-002009
power. If the value
of this parameter is
not specified, the
maximum power is
subject to the UE
capability. For
details, see 3GPP
TS 36.304.

Indicates whether
to set the
LBFD-00201803 /
measurement
TDLBFD-00201803
triggering threshold NO NO NO
LBFD-002009 /
for reselection to
TDLBFD-002009
intra-frequency
cells.

Indicates the
measurement
triggering threshold
for reselection to
intra-frequency
cells.
LBFD-00201803 /
The UEs start intra-
TDLBFD-00201803
frequency NO NO NO
LBFD-002009 /
measurements only
TDLBFD-002009
if the value of Cell
selection RX level
value (dB) is lower
than or equal to the
value of this
parameter.

Indicates whether LBFD-00201803 /

to set the TDLBFD-00201803
NO NO NO
measurement LBFD-002009 /
bandwidth. TDLBFD-002009
Indicates the
measurement
bandwidth on the
serving frequency
on which the UE
camps. It is used in
intra-frequency
measurements for LBFD-00201803 /
cell reselection and TDLBFD-00201803
NO NO NO
those by UEs in LBFD-002009 /
RRC_CONNECTE TDLBFD-002009
D mode. This
parameter is
optional; if it is not
set, the downlink
bandwidth of the
serving cell is used
by default.

Indicates the
evaluation period
for a UE to
determine whether
to perform cell
reselections to a
new E-UTRAN cell.
If the signal quality
of a new E-UTRAN LBFD-00201803 /
cell is better than TDLBFD-00201803
NO NO NO
that of the serving LBFD-002009 /
cell within the TDLBFD-002009
period specified by
this parameter and
a UE camps on the
serving cell for
more than 1s, the
UE initiates cell
reselections to the
new E-UTRAN cell.

Indicates whether
to set the scaling LBFD-00201803 /
parameters for TDLBFD-00201803
NO NO NO
speed-dependent LBFD-002009 /
cell reselection TDLBFD-002009
within E-UTRAN.
Indicates the
scaling factor
applied to
TReselEutra for
medium-mobility
UEs. The actual LBFD-00201803 /
duration of cell TDLBFD-00201803
NO NO NO
reselection for LBFD-002009 /
medium-mobility TDLBFD-002009
UEs to E-UTRAN is
equal to the product
of TReselEutra and
TReselEutranSfMe
dium.

Indicates the
scaling factor
applied to
TReselEutran for
high-mobility UEs.
LBFD-00201803 /
The actual duration
TDLBFD-00201803
of cell reselection of NO NO NO
LBFD-002009 /
high-mobility UEs to
TDLBFD-002009
E-UTRAN is equal
to TReselEutran
multiplied by
TReselEutranSfHig
h.
Indicates the
information related
to MBSFN and TDD
UL/DL
configurations of
intra-frequency
neighboring cells of
the serving cell.
The value 00
indicates that some
neighboring cells
have the same
MBSFN subframe
configuration as the
serving cell.
The value 01
indicates that none
of the neighboring LBFD-00201803 /
cells is configured TDLBFD-00201803
NO NO NO
with MBSFN LBFD-002009 /
subframes. TDLBFD-002009
The value 10
indicates that the
MBSFN subframe
configurations of all
neighboring cells
are the same as or
subsets of that of
the serving cell.
The value 11
indicates that some
neighboring cells
have different UL-
DL configurations
from the serving
TDD cell.
For details, see
3GPP TS 36.331.
Indicates whether
all the intra-
frequency
neighboring cells
are configured with
at least two
antenna ports.
Set this parameter
to
BOOLEAN_TRUE
when all the intra- LBFD-00201803 /
frequency TDLBFD-00201803
NO NO NO
neighboring cells LBFD-002009 /
are configured with TDLBFD-002009
at least two
antenna ports.
Set this parameter
to
BOOLEAN_FALSE
when one of the
intra-frequency
neighboring cells is
configured with only
one antenna port.
Indicates the RSRQ
threshold for
starting intra-
frequency
measurements. It
LBFD-002009 /
determines the
TDLBFD-002009
probability of NO NO NO
LBFD-00201803 /
triggering cell
TDLBFD-00201803
reselection to an
intra-frequency
neighboring cell.
For details, see
3GPP TS 36.304.

Indicates the RSRQ

threshold for
starting inter-
frequency or inter-
RAT
measurements. It
LBFD-002009 /
determines the
TDLBFD-002009
probability of NO NO NO
LBFD-00201803 /
triggering cell
TDLBFD-00201803
reselection to an
inter-frequency or
inter-RAT
neighboring cell.
For details, see
3GPP TS 36.304.

Indicates whether
to set the RSRQ LBFD-002009 /
threshold for TDLBFD-002009
NO NO NO
reselection to cells LBFD-00201803 /
on the serving TDLBFD-00201803
frequency.

Indicates the RSRQ

threshold for cell
reselection to cells
on lower-priority
frequencies. It
determines the
LBFD-002009 /
probability of
TDLBFD-002009
triggering cell NO NO NO
LBFD-00201803 /
reselection to inter-
TDLBFD-00201803
frequency or inter-
RAT neighboring
cells on lower-
priority frequencies.
For details, see
3GPP TS 36.304.
Indicates whether
to set cell
LBFD-002009 /
reselection
TDLBFD-002009
parameters in NO NO NO
LBFD-00201803 /
compliance with
TDLBFD-00201803
3GPP Release 9 in
SIB3.

Indicates the
minimum required
RX signal quality
used in intra-
frequency E-
UTRAN cell
reselection, which LBFD-002009 /
corresponds to the TDLBFD-002009
NO NO NO
IE q-QualMin in LBFD-00201803 /
SIB3. This value is TDLBFD-00201803
included in criteria
R and used in the
evaluation of cell
reselection. For
details, see 3GPP
TS 36.304.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

LBFD-00201803 /
Indicates whether
TDLBFD-00201803
to configure the
LOFD-001035 /
CDMA2000 system
NO NO NO TDLOFD-001035
time information.
LBFD-002009 /
For details, see
TDLBFD-002009
3GPP TS 36.331.
TDLOFD-001090

Indicates the
network
synchronization
status. If this
parameter is set to
BOOLEAN_TRUE,
the E-UTRAN and
LBFD-00201803 /
the CDMA2000
TDLBFD-00201803
RAN are
LOFD-001090 /
synchronized NO NO NO
TDLOFD-001090
without drifts. If this
LBFD-002009 /
parameter is set to
TDLBFD-002009
BOOLEAN_FALSE,
the E-UTRAN and
the CDMA2000
RAN are not
synchronized. For
details, see 3GPP
TS 36.331.

LBFD-00201803 /
TDLBFD-00201803
Indicates whether LOFD-001035 /
to set the search TDLOFD-001035
window size. For NO NO NO LOFD-001021 /
details, see 3GPP TDLOFD-001021
TS 36.331. LBFD-002009 /
TDLBFD-002009
TDLOFD-001090
Indicates the size of LBFD-00201803 /
the CDMA2000 TDLBFD-00201803
search window, and LOFD-001035 /
can be used to TDLOFD-001035
assist in searching NO NO NO LOFD-001021 /
for the neighboring TDLOFD-001021
pilots. For details, LBFD-002009 /
see 3GPP TS TDLBFD-002009
36.331. TDLOFD-001090

Indicates whether
the eNodeB
contains the
information about
CDMA2000 HRPD
in SIB8. If this
parameter is set to
LBFD-00201803 /
CFG, the eNodeB
TDLBFD-00201803
contains the
LOFD-001021 /
parametersHRPD NO NO NO
TDLOFD-001021
field in SIB8. If this
LBFD-002009 /
parameter is set to
TDLBFD-002009
NOT_CFG, the
eNodeB does not
contain the
parametersHRPD
field in SIB8. For
details, see 3GPP
TS 36.331.

LBFD-00201803 /
Indicates whether
TDLBFD-00201803
to set the
LOFD-001021 /
parameters related NO NO NO
TDLOFD-001021
to cell reselection to
LBFD-002009 /
CDMA2000 HRPD.
TDLBFD-002009
Indicates the
evaluation period
for a UE to
determine whether
to reselect a
neighboring
CDMA2000 HRPD
cell to camp on.
During the
evaluation period, if
the signal quality in
LBFD-00201803 /
a neighboring
TDLBFD-00201803
CDMA2000 HRPD
LOFD-001021 /
cell is better than NO NO NO
TDLOFD-001021
that in the serving
LBFD-002009 /
cell and a UE
TDLBFD-002009
camps on the
serving cell for
more than 1s, the
UE attempts to
reselect the
neighboring
CDMA2000 HRPD
cell to camp on. For
details about this
parameter, see
3GPP TS 36.331.
Indicates whether
to set the speed- LBFD-00201803 /
dependent scaling TDLBFD-00201803
parameters related LOFD-001021 /
NO NO NO
to cell reselection to TDLOFD-001021
CDMA2000 HRPD. LBFD-002009 /
For details, see TDLBFD-002009
3GPP TS 36.331.

Indicates the
scaling factor
applied to
TReselCdmaHrpd
for high-mobility
UEs. The actual
LBFD-00201803 /
duration of cell
TDLBFD-00201803
reselection of high-
LOFD-001021 /
mobility UEs to NO NO NO
TDLOFD-001021
CDMA2000 HRPD
LBFD-002009 /
is equal to
TDLBFD-002009
TReselCdmaHrpd
multiplied by
TReselCdmaHrpdSf
High. For details,
see 3GPP TS
36.331.
Indicates the
scaling factor
applied to
TReselCdmaHrpd
for medium-mobility
UEs. The actual
LBFD-00201803 /
duration of cell
TDLBFD-00201803
reselection of
LOFD-001021 /
medium-mobility NO NO NO
TDLOFD-001021
UEs to CDMA2000
LBFD-002009 /
HRPD is equal to
TDLBFD-002009
TReselCdmaHrpd
multiplied by
TReselCdmaHrpdSf
Medium. For
details, see 3GPP
TS 36.331.

Indicates whether
the eNodeB
contains the
information about
CDMA2000 1xRTT
in SIB8. If this
parameter is set to LBFD-00201803 /
CFG, the eNodeB TDLBFD-00201803
contains the LOFD-001035 /
parameters1xRTT NO NO NO LOFD-001035
field in SIB8. If this LBFD-002009 /
parameter is set to TDLBFD-002009
NOT_CFG, the TDLOFD-001090
eNodeB does not
contain the
parameters1xRTT
field in SIB8. For
details, see 3GPP
TS 36.331.
Indicates whether
the information
element (IE)
longCodeState1XR
TT is contained in
system information
message 8 (SIB8).
When this
parameter is set to
CFG(Configure),
the IE
longCodeState1XR LBFD-00201803 /
TT is contained in TDLBFD-00201803
SIB 8. When this LOFD-001090 /
NO NO NO
parameter is set to TDLOFD-001090
NOT_CFG(Not LBFD-002009 /
configure), the IE TDLBFD-002009
longCodeState1XR
TT is not contained
in SIB 8. The
CDMA2000 1xRTT-
specific long code
state is
automatically
generated based on
system time. For
details, see 3GPP
TS 36.331.

LBFD-00201803 /
Indicates whether
TDLBFD-00201803
the parameters
LOFD-001035 /
applicable only for
NO NO NO TDLOFD-001035
cell reselection to
LBFD-002009 /
CDMA2000 1xRTT
TDLBFD-002009
need to be set.
TDLOFD-001090
Indicates the
evaluation period
for a UE to
determine whether
to reselect a
neighboring
CDMA2000 1xRTT
cell to camp on.
During the
evaluation period, if
the signal quality in LBFD-00201803 /
a neighboring TDLBFD-00201803
CDMA2000 1xRTT LOFD-001035 /
cell is better than NO NO NO TDLOFD-001035
that in the serving LBFD-002009 /
cell and a UE TDLBFD-002009
camps on the TDLOFD-001090
serving cell for
more than 1s, the
UE attempts to
reselect the
neighboring
CDMA2000 1xRTT
cell to camp on. For
details about this
parameter, see
3GPP TS 36.331.

LBFD-00201803 /
Indicates whether
TDLBFD-00201803
speed-dependent
LOFD-001035 /
scaling parameters
NO NO NO TDLOFD-001035
need to be set for
LBFD-002009 /
cell reselection to
TDLBFD-002009
CDMA2000 1xRTT.
TDLOFD-001090
Indicates the
scaling factor LBFD-00201803 /
applicable to cell TDLBFD-00201803
reselection of LOFD-001035 /
medium-mobility NO NO NO TDLOFD-001035
UEs to CDMA2000 LBFD-002009 /
1xRTT. For details, TDLBFD-002009
see 3GPP TS TDLOFD-001090
36.331.

Indicates the
LBFD-00201803 /
scaling factor
TDLBFD-00201803
applicable to cell
LOFD-001035 /
reselection of high-
NO NO NO TDLOFD-001035
mobility UEs to
LBFD-002009 /
CDMA2000 1xRTT.
TDLBFD-002009
For details, see
TDLOFD-001090
3GPP TS 36.331.

Indicates whether
to configure the
network capability
of dual-receiver LOFD-
enhanced circuit NO NO NO 001035/TDLOFD-
switched fallback 001035
(CSFB). For details,
see 3GPP TS
36.331.
Indicates whether
the network
supports dual-
receiver enhanced
circuit switched
fallback (CSFB) to
CDMA2000 1xRTT.
If this parameter is LOFD-
set to NO NO NO 001035/TDLOFD-
BOOLEAN_TRUE, 001035
the network
supports dual-
receiver enhanced
CSFB to
CDMA2000 1xRTT.
For details, see
3GPP TS 36.331.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the
evaluation period
for a UE to
determine whether
to reselect a
neighboring
GERAN cell to
camp on. During
the evaluation
period, if the signal
LBFD-00201803 /
quality in a
TDLBFD-00201803
neighboring NO NO NO
LBFD-002009 /
GERAN cell is
TDLBFD-002009
better than that in
the serving cell and
a UE camps on the
serving cell for
more than 1s, the
UE attempts to
reselect the
neighboring
GERAN cell to
camp on.
Indicates whether
to set the speed- LBFD-00201803 /
dependent scaling TDLBFD-00201803
NO NO NO
parameters related LBFD-002009 /
to cell reselection to TDLBFD-002009
GERAN.

Indicates the
scaling factor
applied to
TReselGeran for
medium-mobility
UEs. The actual
LBFD-00201803 /
duration of cell
TDLBFD-00201803
reselection of NO NO NO
LBFD-002009 /
medium-mobility
TDLBFD-002009
UEs to GERAN is
equal to
TReselGeran
multiplied by
TReselGeranSfMed
ium.

Indicates the
scaling factor
applied to
TReselGeran for
high-mobility UEs.
LBFD-00201803 /
The actual duration
TDLBFD-00201803
of cell reselection of NO NO NO
LBFD-002009 /
high-mobility UEs to
TDLBFD-002009
GERAN is equal to
TReselGeran
multiplied by
TReselGeranSfHigh
.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the
evaluation period
for a UE to
determine whether
to reselect a
neighboring UTRAN
cell to camp on.
During the
evaluation period, if
LBFD-002009 /
the signal quality in
TDLBFD-002009
a neighboring NO NO NO
LBFD-00201803 /
UTRAN cell is
TDLBFD-00201803
better than that in
the serving cell and
a UE camps on the
serving cell for
more than 1s, the
UE attempts to
reselect the
neighboring UTRAN
cell to camp on.

Indicates whether
to set the speed- LBFD-00201803 /
dependent scaling TDLBFD-00201803
NO NO NO
parameters related LBFD-002009 /
to cell reselection to TDLBFD-002009
UTRAN.

Indicates the
scaling factor
applied to
TReselUtran for
medium-mobility
UEs. The actual
duration of cell
reselection of
medium-mobility
UEs to UTRAN is
LBFD-00201803 /
equal to
TDLBFD-00201803
TReselUtran NO NO NO
LBFD-002009 /
multiplied by
TDLBFD-002009
TReselUtranSfMedi
um.
The value
T_RESEL_SF_0DO
T25 means a
scaling factor of
0.25,
T_RESEL_SF_0DO
T5 means 0.5, and
so on.
Indicates the
scaling factor
applied to
TReselUtran for
high-mobility UEs.
The actual duration
of cell reselection of
high-mobility UEs to
UTRAN is equal to LBFD-00201803 /
TReselUtran TDLBFD-00201803
NO NO NO
multiplied by LBFD-002009 /
TReselUtranSfHigh. TDLBFD-002009
The value
T_RESEL_SF_0DO
T25 means a
scaling factor of
0.25,
T_RESEL_SF_0DO
T5 means 0.5, and
so on.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the
minimum required
RX level for the cell
to become a
candidate for cell LBFD-00201803 /
selection. This TDLBFD-00201803
NO NO NO
value is included in LBFD-002009 /
criteria S and used TDLBFD-002009
in the evaluation of
cell selection. For
details, see 3GPP
TS 36.304.
Indicates the offset
to the minimum
required RX level.
This value is
included in criteria
S and used in the
evaluation of cell
selection. This
parameter is valid
LBFD-00201803 /
only when the cell
TDLBFD-00201803
selection is NO NO NO
LBFD-002009 /
triggered by
TDLBFD-002009
periodic searches
for higher-priority
PLMNs and the UE
is served by a
Visited Public Land
Mobile Network
(VPLMN). For
details, see 3GPP
TS 36.304.

Indicates the
minimum required
RX signal quality for
the cell to become
a candidate for cell
selection, which
LBFD-002009 /
corresponds to the
TDLBFD-002009
IE q-QualMin in NO NO NO
LBFD-00201803 /
SIB1. This value is
TDLBFD-00201803
included in criteria
S and used in the
evaluation of cell
selection. For
details, see 3GPP
TS 36.304.

Indicates whether
LBFD-002009 /
to set the offset to
TDLBFD-002009
the minimum NO NO NO
LBFD-00201803 /
required RX level
TDLBFD-00201803
for the cell.
Indicates the offset
to the minimum
required RX signal
quality for the cell. It
is included in
criteria S and used
in the evaluation of
cell selection. This
parameter is
LBFD-002009 /
required only when
TDLBFD-002009
the cell selection is NO NO NO
LBFD-00201803 /
triggered by
TDLBFD-00201803
periodic searches
for higher-priority
PLMNs and the UE
is served by a
Visited Public Land
Mobile Network
(VPLMN). For
details, see 3GPP
TS 36.304.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates whether
the mapping from
SIBs to SI
messages is
enabled. If it is
disabled, a fixed
configuration is
used for the
mapping from SIBs
to SI messages and LBFD-002009 /
NO NO NO
the SI window size. TDLBFD-002009
If it is enabled, the
mapping from SIBs
to SI messages and
the SI window size
are determined
based on the
transmission period,
quantity, and data
traffic of SIBs.
Indicates the
transmission period
for system
LBFD-002009 /
information block NO NO NO
TDLBFD-002009
type 2 (SIB2). For
details, see 3GPP
TS 36.331.

Indicates the
transmission period
for system
LBFD-002009 /
information block NO NO NO
TDLBFD-002009
type 3 (SIB3). For
details, see 3GPP
TS 36.331.

Indicates the
transmission period
for system
LBFD-002009 /
information block NO NO NO
TDLBFD-002009
type 4 (SIB4). For
details, see 3GPP
TS 36.331.
Indicates the
transmission period
for system
LBFD-002009 /
information block NO NO NO
TDLBFD-002009
type 5 (SIB5). For
details, see 3GPP
TS 36.331.

Indicates the
transmission period
for system
LBFD-002009 /
information block NO NO NO
TDLBFD-002009
type 6 (SIB6). For
details, see 3GPP
TS 36.331.

Indicates the
transmission period
for system
LBFD-002009 /
information block NO NO NO
TDLBFD-002009
type 7 (SIB7). For
details, see 3GPP
TS 36.331.
Indicates the
transmission period
for system
LBFD-002009 /
information block NO NO NO
TDLBFD-002009
type 8 (SIB8). For
details, see 3GPP
TS 36.331.

Indicates the
transmission period
LBFD-002029 /
for system
TDLBFD-002029
information block NO NO NO
LBFD-002009 /
type 10 (SIB10).
TDLBFD-002009
For details, see
3GPP TS 36.331.

Indicates the
transmission period
LBFD-002029 /
for system
TDLBFD-002029
information block NO NO NO
LBFD-002009 /
type 11 (SIB11). For
TDLBFD-002009
details, see 3GPP
TS 36.331.
Indicates the
duration of the
primary notification
LBFD-002029 /
(PN) broadcast for NO NO NO
TDLBFD-002029
the Earthquake and
Tsunami Warning
System (ETWS).

Indicates the policy

of processing
repeated secondary
notification (SN)
broadcast for the
Earthquake and
Tsunami Warning
System (ETWS). A
repeated SN is a
second SN that has
the same IEs
Message Identifier
and Serial Number
as those in the first LBFD-002029 /
NO NO NO
SN. The value TDLBFD-002029
MERGE indicates
that the cell stops
broadcasting the
first SN and then
broadcasts the
second SN. The
value DISCARD
indicates that the
cell ignores the
second SN and
continues
broadcasting the
first SN.
Indicates the policy
of processing
repeated primary
notification (PN)
broadcast for the
Earthquake and
Tsunami Warning
System (ETWS). A
repeated PN is a
second PN that has
the same Message
Identifier and Serial
Number IEs as
those in the first
LBFD-002029 /
PN. If this NO NO NO
TDLBFD-002029
parameter is set to
MERGE, the
eNodeB stops
broadcasting the
first PN and starts
broadcasting the
second PN. If this
parameter is set to
DISCARD, the
eNodeB discards
the second PN and
continues
broadcasting the
first PN.

Indicates the
transmission period
LOFD-001092 /
for system
TDLOFD-001092
information block NO NO NO
LBFD-002009 /
type 12 (SIB12).
TDLBFD-002009
For details, see
3GPP TS 36.331.
Indicates the code
rate of system
information
LBFD-002009 /
transmission. For NO NO NO
TDLBFD-002009
details about this
parameter, see
3GPP TS 36.331.

Indicates the
transmission period
LBFD-001001 /
for system
TDLBFD-001001
information block NO NO NO
LBFD-002009 /
type 13 (SIB13).
TDLBFD-002009
For details, see
3GPP TS 36.331.

Indicates the
transmission period LOFD-080215
for system LBFD-002009 /
information block NO NO NO TDLBFD-002009
type 15 (SIB15). LOFD-070220 /
For details, see TDLOFD-070220
3GPP TS 36.331.
Indicates the
transmission period LOFD-080215
for system LBFD-002009 /
information block NO NO NO TDLBFD-002009
type 16 (SIB16). LOFD-070220 /
For details, see TDLOFD-070220
3GPP TS 36.331.

Indicates whether
the eNodeB uses a
new mechanism to
send system
information block
(SIB) messages.
The eNodeB uses
the new mechanism
to send SIB
messages only NO NO NO LBFD-002009
when this
parameter is set to
ON. In this case,
the probability of
SIB retransmissions
decreases and
therefore fewer
PDCCH resources
are consumed.
Indicates the
resource proportion
in SI scheduling
and controls
whether SI-based
GAP optimization
takes effect. If this
parameter is set to
0 (corresponding to
the actual value 0),
the parameter value
representing the
resource proportion
in SI scheduling
does not take effect
and SI-based GAP
LBFD-
optimization does
NO NO NO 002009/TDLBFD-
not take effect. If
002009
this parameter is
set to a value within
the range of 40 to
100 (corresponding
to the actual value
within the range of
0.4 to 1.0), the
parameter value
represents the
resource proportion
in SI scheduling,
and SI-based GAP
optimization takes
effect to guarantee
SI demodulation
performance.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the
compensation
LBFD-002026 /
factor for path loss.
TDLBFD-002026
It is used in UL NO NO NO
LBFD-002009 /
power control. For
TDLBFD-002009
details, see 3GPP
TS 36.213.

Indicates the target

UE transmit power
for the PUCCH
expected by the
LBFD-002026 /
eNodeB on
TDLBFD-002026
condition that NO NO NO
LBFD-002009 /
normal
TDLBFD-002009
demodulation can
be performed. For
details, see 3GPP
TS 36.213.
Indicates the
nominal P0 value of
LBFD-002026 /
the PUSCH. It is
TDLBFD-002026
used in UL power NO NO NO
LBFD-002009 /
control. For details,
TDLBFD-002009
see 3GPP TS
36.213.

Indicates the Delta

value LBFD-002026 /
corresponding to TDLBFD-002026
NO NO NO
PUCCH format 1. LBFD-002009 /
For details, see TDLBFD-002009
3GPP TS 36.213.

Indicates the Delta

value LBFD-002026 /
corresponding to TDLBFD-002026
NO NO NO
PUCCH format 1b. LBFD-002009 /
For details, see TDLBFD-002009
3GPP TS 36.213.
Indicates the Delta
value LBFD-002026 /
corresponding to TDLBFD-002026
NO NO NO
PUCCH format 2. LBFD-002009 /
For details, see TDLBFD-002009
3GPP TS 36.213.

Indicates the Delta

value LBFD-002026 /
corresponding to TDLBFD-002026
NO NO NO
PUCCH format 2a. LBFD-002009 /
For details, see TDLBFD-002009
3GPP TS 36.213.

Indicates the Delta

value LBFD-002026 /
corresponding to TDLBFD-002026
NO NO NO
PUCCH format 2b. LBFD-002009 /
For details, see TDLBFD-002009
3GPP TS 36.213.
Indicates the power
offset (delta value)
of message 3
LBFD-002026 /
relative to the
TDLBFD-002026
preamble. This NO NO NO
LBFD-002009 /
power offset has a
TDLBFD-002009
step size of 2. For
details, see 3GPP
TS 36.213.

Indicates the power

offset of Msg3
transmitted during
uplink random
access. This LBFD-
parameter is also NO NO NO 002026/TDLBFD-
used to set the 002026
initial power of the
PUSCH or PUCCH
for closed-loop
power control.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the local
tracking area
identity of the cell,
which uniquely
identifies an
operator's record of
tracking area
information within a YES YES NO None
cell. This parameter
is used only in the
eNodeB and is
different from the
TAI configured in
the TAL on the
MME.

Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 7 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 10 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 11 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 12 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 13 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 14 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 15 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 16 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 17 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 18 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 19 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 20 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 21 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the local

cell identity. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the ID of
the primary
baseband
equipment that
serves a cell.
If the primary
baseband
equipment is not
configured for a
cell, the eNodeB
selects baseband
processing units for
the cell among all
baseband
processing units
NO YES NO None
that have not been
bound to cells.
If this parameter is
normally
configured, the cell
uses specified
primary baseband
equipment. In this
case, the cell can
use only the
baseband
processing units
included in the
primary baseband
equipment.

Indicates the local

cell identity. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the ID of
the sector device
that serves the
cell,it uniquely YES YES NO None
identifies a sector
device within an
eNodeB.
Indicates the
reference signal
power of the cell
sector device. The
value 32767
indicates that this
reference signal
power parameter is
invalid. In this case,
the reference signal
power of the cell
NO NO NO None
equals the value of
the PDSCHCFG
parameter. For
details, see 3GPP
TS 36.213.This
parameter is valid
only when a multi-
RRU cell works in
SFN,MPRU_AGGR
EGATION or cell
combination mode.

Indicates the ID of
the baseband
equipment serving
a cell.
When this
parameter is set to
255, the baseband
equipment serving
a cell is not
specified. In this
scenario, the LTE
baseband
processing units
(LBBPs) serving a
cell are selected
among all LBBPs in
the eNodeB, and
the LBBPs to which NO NO NO None
the cell's serving
RRU is connected
are preferentially
selected.
When this
parameter is set to
a value other than
255, the cell is
served by LBBPs in
the specified
baseband
equipment, and the
LBBPs to which the
cell's serving RRU
is connected are
preferentially
selected.
Indicates the
cabinet number of NO NO YES None
the RRU.

Indicates the
subrack number of NO NO YES None
the RRU.

Indicates the slot

NO NO YES None
number of the RRU.

Indicates the
received total
wideband power
(RTWP) for the
carrier. The normal
value range is from NO NO YES None
-110 dBm to -40
dBm. The RRU
cannot work
properly if the value
is out of range.

Indicates the RX
channel number of
the RRU. An RRU
NO NO YES None
is configured with
multiple RX
channels.
power headroom
for the sector
device serving the
cell. This parameter
takes effect only
when the
MultiRruCellFlag
parameter is set to
BOOLEAN_TRUE
and the
MultiRruCellMode
parameter is set to
SFN or
CELL_COMBINATI
ON.
If this parameter is
set to 0, the
reference signal
power headroom
NO NO NO None
for the sector
device serving the
cell is subject to the
power headroom
configured in the
PDSCHCFG MO
rather than the
parameter setting. If
this parameter is
set to a non-zero
value, the reference
signal power
headroom for the
sector device
serving the cell is
subject to the
parameter setting
rather than the
power headroom
used. The
parameter value
NULL indicates that
this parameter is
invalid. The
performance of
enhanced CPRI
compression is
better than the
performance of
normal CPRI
compression. If the
eNodeB is
equipped with
LBBPd boards and
the CPRI data rate
is 9.8 Gbit/s for LTE
FDD cells or the LOFD-001076 /
CPRI data rate is NO NO NO TDLOFD-001076 /
greater than 4.9 TDLOFD-081214
Gbit/s for LTE TDD
cells, the CPRI
compression type
of cells served by
RRUs in the same
RRU chain or ring
must be the same.
Before changing
the value of this
parameter for a cell
served RRUs in the
same RRU chain or
ring, ensure that all
cells served by the
RRU chain or ring
are deactivated.
Activate the cells

Indicates the ID of
NO NO YES None
the eNodeB.

Indicates whether
to automatically or
manually bind a
baseband
equipment ID to a
cell. To enable
automatic binding,
set this parameter NO NO NO None
to
AUTO_MODE_CF
G. To enable
manual binding, set
this parameter to
MANUAL_MODE_
CFG.
Indicates the weight
number configured
for a piece of sector
equipment in a cell.
If this parameter is
set to 255, the
default weight
number is used.
The value of this
parameter is the
same as that of the
NO NO NO None
DEVICENO
parameter in the
BfAnt MO. If the
corresponding
device number
cannot be queried,
the default weight
number is used.
This parameter
applies only to LTE
TDD networks.

Indicates the local

cell identity. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the group
ID of the sector
devices that serve
the cell,it uniquely YES YES NO None
identifies a group of
sector devices
within a cell.

Indicates the list of

the sector devices NO YES NO None
that serve the cell.

Indicates the ID of
the sector device YES YES NO None
that serves the cell.
Indicates the ID of
the baseband
equipment serving
a cell.
When this
parameter is set to
255, the baseband
equipment serving
a cell is not
specified. In this
scenario, the LTE
baseband
processing units
(LBBPs) serving a
cell are selected
among all LBBPs in
the eNodeB, and
the LBBPs to which NO NO NO None
the cell's serving
RRU is connected
are preferentially
selected.
When this
parameter is set to
a value other than
255, the cell is
served by LBBPs in
the specified
baseband
equipment, and the
LBBPs to which the
cell's serving RRU
is connected are
preferentially
selected.
Indicates the
reference signal
power of a sector
equipment group
for a cell (all sets of
sector equipment in
the sector
equipment group
have the same
reference signal
power). If this
parameter is set to
32767, the
parameter value is
invalid, and the cell
uses the reference
signal power
specified by the NO NO NO None
ReferenceSignalPw
r parameter in the
PDSCHCFG MO.
For details, see
3GPP TS 36.213.
This parameter
takes effect only
when parameter
MultiRruCellFlag is
set to
BOOLEAN_TRUE
and
MultiRruCellMode is
set to
MPRU_AGGREGA
TION or FDD SFN,
respectively.
invalid. The
performance of
enhanced CPRI
compression is
better than the
performance of
normal CPRI
compression. If the
eNodeB is
equipped with
LBBPd boards and
the CPRI data rate
is 9.8 Gbit/s for LTE
FDD cells or the
CPRI data rate is
greater than 4.9
Gbit/s for LTE TDD
cells, the CPRI LOFD-001076 /
compression type NO NO NO TDLOFD-001076 /
of cells served by TDLOFD-081214
RRUs in the same
RRU chain or ring
must be the same.
If this parameter
value is changed,
the cell served by
the sector
equipment group
automatically
resets.
This parameter is
used only when
MultiRruCellMode is
set to SFN or
CELL_COMBINATI
ON. This parameter
can be set based
Indicates whether
to automatically or
manually bind a
baseband
equipment ID to a
cell. To enable
automatic binding,
set this parameter NO NO NO None
to
AUTO_MODE_CF
G. To enable
manual binding, set
this parameter to
MANUAL_MODE_
CFG.

Indicates the local

cell identity of the
cell. It uniquely YES YES NO None
identifies a cell
within an eNodeB.
Indicates the ID of
the eNodeB to
which the NO NO YES None
RRU/RFU
connected.
Indicates the
cabinet number of NO NO YES None
the RRU/RFU.

Indicates the
subrack number of NO NO YES None
the RRU/RFU.

Indicates the slot

number of the NO NO YES None
RRU/RFU.

Indicates the
number of BBP NO NO YES None
data links.

Indicates the BBP

NO NO YES None
data link ID.

Indicates the status

of the BBP data NO NO YES None
link.

Indicates the open

DU interface (ODI) NO NO YES None
ID.

Indicates the input

port number of the NO NO YES None
BBP data link.

Indicates the output

port number of the NO NO YES None
BBP data link.

Indicates the
loopback delay on NO NO YES None
the BBP data link.

Indicates the
number of loopback
NO NO YES None
timeouts on the
BBP data link.
Indicates the
cabinet number of
the board involved NO NO YES None
in data link
transmission.
Indicates the
subrack number of
the board involved NO NO YES None
in data link
transmission.
Indicates the slot
number of the
board involved in NO NO YES None
data link
transmission.
of the BBP data
link. The parameter
value
BIDIRECTIONAL
indicates that a
data link is
bidirectional, that is,
the BBP data can
be transmitted
between the input
port of the BBP
data link (source
port) and the output
port of the BBP
data link (target
port). The
parameter value
FORWARD_DIREC
TION indicates that
NO NO YES None
the BBP data can
be transmitted only
from the input port
of the BBP data link
(source port) to the
output port of the
BBP data link
(target port). The
parameter value
BACKWARD_DIRE
CTION indicates
that the BBP data
can be transmitted
only from the input
port of the BBP
data link (target
port) to the output
port of the BBP
data link (source
Indicates the local
identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the length
of the uplink time
alignment timer for
UEs in the cell. A
NO NO NO None
UE is considered
not time-aligned in
the uplink if the
timer expires.
uplink time
alignment
commands
delivered to
motionless or low-
mobility UEs can be
reduced to save air
interface resources
and reduce power
consumption of
UEs in DRX mode.
This ensures the
uplink time
alignment
performance if the
length of the uplink
time alignment
timer is set to a
large value.
NO NO NO None
If this parameter is
set to ON, it is
recommended that
the
TimeAlignmentTime
r parameter be set
to SF10240. A
smaller value of the
TimeAlignmentTime
r parameter, such
as SF5120, leads to
a higher probability
of becoming out-of-
synchronization in
the uplink for UEs
in DRX mode.
If this parameter is
set to ON, it is
recommended that
uplink timing offsets
are measured
based on the
DMRS for PUSCH
and SRS or based
on the DMRS for
PUSCH and
channel quality
indicator (CQI) in
PUCCH. In
addition, the value
ON of the
TimingAdvCmdOpt
Switch parameter
takes effect
regardless of the
actual parameter
setting. That is, the
eNodeB always
NO NO NO LBFD-070101
sends the Timing
Advance Command
to UEs. In this case,
it is recommended
that the
TimeAlignmentTime
r parameter be set
to SF10240. The
value
ALLMEASMODE
applies only to LTE
FDD cells. The
parameter value
INVALID takes
effect in a cell
regardless of the
actual parameter
setting in any of the
following scenarios:
Indicates the
interval for sending
the Timing Advance
Command to UEs.
This parameter
needs to be set
only when the
TimingAdvCmdOpt
NO NO NO None
Switch parameter is
set to ON. If this
parameter is set to
Invalid, none of
parameter settings
in the MML
Command window
takes effect.
scheduling for
uplink timing.If this
parameter is set to
OFF, the eNodeB
adopts the existing
resource
scheduling policy
for uplink timing,
which consumes a
large amount of
resources used for
delivering Timing
Advance
Commands in large
traffic scenarios.If
this parameter is
set to ON, the
eNodeB adopts the
mechanism of NO NO NO None
optimized resource
scheduling for
uplink timing, which
reduces the number
of unnecessary
Timing Advance
Commands to be
delivered and
reduces resources
allocated for uplink
timing in large traffic
scenarios.This
parameter applies
only to LTE FDD
cells. The
parameter value
ON is
recommended in
Indicates the offset
compensation of
the timing advance
on the PUCCH.
NO NO NO None
This parameter
does not take effect
on cells established
on an LBBPc.
uplink-
synchronization-
induced overloads
over the air
interface decrease.
If this option is
deselected,
enhanced TA is
disabled.
This parameter
does not take effect
in the following
scenarios: 1. The
FddTddInd
parameter in the
Cell MO is set to
CELL_TDD(TDD).
2. The baseband
processing unit type
NO NO NO None
is the LBBPc.
3. The
HoppingMode
parameter in the
PUSCHCfg MO is
set to
INTRA_AND_INTE
R_SUB_FRAME(Int
er And Intra).
4. The
HighSpeedFlag
parameter in the
Cell MO is set to
HIGH_SPEED(High
speed cell flag),
ULTRA_HIGH_SPE
ED(Ultra high
speed cell flag), or
EXTRA_HIGH_SPE
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the timer
value of Timer 300.
For details, see
3GPP TS 36.331.
This timer is started
when the UE sends
RRCConnectionRe
quest.
Before the timer
expires, it is LBFD-002009 /
NO NO NO
stopped if the UE TDLBFD-002009
receives
RRCConnectionSet
up or
RRCConnectionRej
ect.
After the timer
expires, the UE
enters the
RRC_IDLE state.

Indicates the length

of timer 301. For
details, see 3GPP
TS 36.331.
This timer is started
when the UE sends
an RRC Connection
Reestablishment
Request message.
The timer is
stopped if, before it
expires, the UE
receives an RRC
Connection
Reestablishment or LBFD-002009 /
NO NO NO
RRC Connection TDLBFD-002009
Reestablishment
Reject message.
The timer is also
stopped if the
selected cell
becomes an
unsuitable cell. For
the definition of a
suitable cell, see
3GPP TS 36.331.
After the timer
expires, the UE
enters the
RRC_IDLE mode.
Indicates the length
of timer 310. For
details, see 3GPP
TS 36.331.
This timer is started
when the UE
detects any fault at
the physical layer.
The timer is
stopped if the UE
detects one of the
following before the
timer expires: (1)
The physical-layer
fault is rectified; (2)
A handover is
LBFD-002009 /
triggered; (3) The NO NO NO
TDLBFD-002009
UE initiates an RRC
connection
reestablishment
procedure.
After the timer
expires, the UE
enters the
RRC_IDLE mode if
the security mode is
not activated. If the
security mode is
activated, the UE
initiates an RRC
connection
reestablishment
procedure.

Indicates the length

of timer 311. For
details, see 3GPP
TS 36.331.
This timer is started
when the UE starts
the RRC
connection
reestablishment
procedure.
LBFD-002009 /
The timer is NO NO NO
TDLBFD-002009
stopped if, before
the timer expires,
the UE selects an
E-UTRAN or inter-
RAT cell to camp
on.
After the timer
expires, the UE
enters the
RRC_IDLE mode.
Indicates the
maximum number
of successive "in
LBFD-002009 /
sync" indications NO NO NO
TDLBFD-002009
received from L1.
For details, see
3GPP TS 36.331.

Indicates the
maximum number
of successive "out
LBFD-002009 /
of sync" indications NO NO NO
TDLBFD-002009
received from L1.
For details, see
3GPP TS 36.331.

Indicates the length

of the timer T325.
For details about
the timer, see 3GPP
TS 36.331. This
timer starts when a
UE receives the
RRCConnectionRej
ect message
including the
deprioritisationReq LBFD-002007 /
NO NO NO
IE. After the timer TDLBFD-002007
expires, the cell
reselection priorities
of E-UTRAN
frequencies are
restored if these
priorities have been
lowered based on
information in an
RRCConnectionRej
ect message.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the name

NO YES NO None
of the cell.
Indicates whether
the cell is a closed
subscriber group
(CSG) cell. A CSG
cell has restrictions
on UE access. It
broadcasts a
specific CSG ID in
the SIB and only
those UEs of the LBFD-002009 /
group can access TDLBFD-002009
NO NO NO
the CSG cell. LBFD-00201803 /
BOOLEAN_FALSE TDLBFD-00201803
indicates that the
cell is not a CSG
cell, and
BOOLEAN_TRUE
indicates that the
cell is a CSG cell.
Currently, Huawei
eNodeBs do not
support CSG cells.

Indicates the UL
cyclic prefix length
of a cell. A cyclic
prefix can be a
common or
extended cyclic
prefix. An extended
cyclic prefix is
generally used in a
complex
environment with a LBFD-00100401 /
strong multi-path TDLBFD-00100401
effect and long LOFD-001031 /
NO NO NO
delay. In a cell, the TDLOFD-001031
UL cyclic prefix LBFD-002009 /
length can be TDLBFD-002009
different from the
DL one. In addition,
the UL or DL cyclic
prefix length of a
cell must be the
same as that of the
cell using the same
BBP. For details,
see 3GPP TS
36.211.
Indicates the length
of the DL cyclic
prefix of a cell. A DL
cyclic prefix can be
a common or
extended cyclic
prefix. An extended
cyclic prefix is
generally used in a
complex
environment with a
strong multi-path LBFD-00100401 /
effect and long TDLBFD-00100401
NO NO NO
delay. In a cell, the LOFD-001031 /
UL cyclic prefix TDLOFD-001031
length can be
different from the
DL one. In addition,
the UL or DL cyclic
prefix length of a
cell must be the
same as that of the
cell using the same
BBP. For details,
see 3GPP TS
36.211.
Indicates the
LBFD-00201803 /
frequency band in
TDLBFD-00201803
which the cell
LBFD-002009 /
operates. For NO YES NO
TDLBFD-002009
details about this
LBFD-070103 /
parameter, see
TDLBFD-00201806
3GPP TS 36.104.

Indicates whether LBFD-00201803 /

to configure the TDLBFD-00201803
NO NO NO
uplink EARFCN of LBFD-002009 /
the cell. TDLBFD-002009
Indicates the UL
EARFCN of the cell.
It is optional,
depending on the
setting of the UL
EARFCN
configuration LBFD-00201801 /
indicator TDLBFD-00201801
(UlEarfcnCfgInd). If LBFD-00201803 /
NO NO NO
the value of this TDLBFD-00201803
parameter is not LBFD-002009 /
specified, the TDLBFD-002009
default UL EARFCN
is used, which is
calculated based on
the DL EARFCN.
For details, see
3GPP TS 36.104.

LBFD-002009 /
Indicates the DL TDLBFD-002009
EARFCN of the cell. LBFD-00201801 /
NO YES NO
For details, see the TDLBFD-00201801
3GPP TS 36.104. LBFD-00201803 /
TDLBFD-00201803
Indicates the UL
bandwidth of the
cell, which is based
on the number of
resource blocks
(RBs). The value
CELL_BW_N25
indicates a cell
bandwidth of 25
RBs. The value
LOFD-001051
CELL_BW_N50
LBFD-002009 /
indicates a cell NO YES NO
TDLBFD-002009
bandwidth of 50
TDLBFD-001003
RBs. The mapping
between the
parameter value
and the actual cell
bandwidth (that is,
the number of RBs)
can be deduced
similarly. For
details, see 3GPP
TS 36.104.
Indicates the DL
bandwidth of the
cell, which is based
on the number of
resource blocks
(RBs). The value
CELL_BW_N25
indicates a cell
bandwidth of 25
RBs. The value
LOFD-001051
CELL_BW_N50
LBFD-002009 /
indicates a cell NO YES NO
TDLBFD-002009
bandwidth of 50
TDLBFD-001003
RBs. The mapping
between the
parameter value
and the actual cell
bandwidth (that is,
the number of RBs)
can be deduced
similarly. For
details, see 3GPP
TS 36.104.

Indicates the ID of
the E-UTRAN cell.
The combination of
this parameter and
the eNodeB ID
forms the E-UTRAN
cell identity. The LBFD-002009 /
NO YES NO
combination of the TDLBFD-002009
E-UTRAN cell
identity and the
PLMN identity
forms the ECGI. For
details, see 3GPP
TS 36.413.
Indicates the
LOFD-001051
physical cell ID. For
NO YES NO LBFD-002009 /
details, see 3GPP
TDLBFD-002009
TS 36.331.

Indicates the
additional spectrum
emission, which
restricts the LBFD-002009 /
NO NO NO
emission power of TDLBFD-002009
the UEs in the cell.
For details, see the
3GPP TS 36.101.
Indicates the active
state of the cell. It
consists of the NO NO NO None
activated and
deactivated states.
Indicates the
administrative state
of the cell. If this
parameter is set to
CELL_HIGH_BLOC
K, the cell is
deactivated
immediately. If this
parameter is set to
CELL_MIDDLE_BL
OCK, new users
are not allowed to
access the cell and
the cell is
deactivated when it
has no user to
serve during the
period specified by NO NO NO None
the CellMidBlkTimer
parameter, or is
deactivated when
the timer expires
irrespective of
whether it has
users to serve. If
this parameter is
set to
CELL_LOW_BLOC
K, new users are
not allowed to
access the cell and
the cell is
deactivated only
when the cell has
no user to serve.

Indicates the length

of the timer used to
determine whether
to block a middle-
blocking-priority
cell. If
CellAdminState is
set to
CELL_MIDDLE_BL
OCK, new users
are not allowed to NO NO NO None
access the cell and
the cell is
deactivated when
no user accesses
the cell during the
period of time
specified by this
parameter. The cell
is also deactivated
if the timer expires.
Indicates the duplex LBFD-002009
mode of the cell. TDLBFD-001007
CELL_FDD TDLBFD-00100701
indicates the FDD TDLBFD-00100702
NO YES NO
mode, and TDLOFD-001026
CELL_TDD TDLOFD-00102601
indicates the TDD TDLOFD-00102602
mode. TDLOFD-00102603

Indicates the ratio
of UL subframes to
DL subframes in a
NO NO
TDD cell. For
details, see 3GPP
TS 36.211.
LBFD-002009
TDLBFD-001007
TDLBFD-00100701
TDLBFD-00100702
NO
TDLOFD-001026
TDLOFD-00102601
TDLOFD-00102602
TDLOFD-00102603
 LBFD-002009
Indicates the ratio
TDLBFD-001007
of special UL
TDLBFD-00100701
subframes to
TDLBFD-00100702
special DL NO NO NO
TDLOFD-001026
subframes in a TDD
TDLOFD-00102601
cell. For details, see
TDLOFD-00102602
3GPP TS 36.211.
TDLOFD-00102603
Indicates the cell
specific offset for LBFD-00201801 /
the serving cell. It TDLBFD-00201801
affects the TDLBFD-002018
probability of TDLBFD-00201802
triggering TDLBFD-00201804
handovers from the TDLBFD-00201805
NO NO NO
serving cell to its TDLOFD-001019
neighboring cells. A TDLOFD-001043
smaller value of this TDLOFD-001072
parameter leads to TDLOFD-001020
a higher probability. TDLOFD-001046
For details, see TDLOFD-001073
3GPP TS 36.331.
Indicates the
specific frequency LBFD-00201801
offset of the serving LBFD-00201803
cell. This parameter TDLBFD-002018
is contained in the TDLBFD-00201802
measurement TDLBFD-00201804
control information TDLBFD-00201805
NO NO NO
and is related to the TDLOFD-001019
handover difficulty TDLOFD-001043
between the TDLOFD-001072
serving cell and the TDLOFD-001020
neighboring cell. TDLOFD-001046
For details, see TDLOFD-001073
3GPP TS 36.331.
Indicates the first
logical root
sequence, which is
used to generate
the preamble
sequence. Each
logical root
sequence
LBFD-002010 /
corresponds to a NO YES NO
TDLBFD-002010
physical root
sequence. For the
mapping between
logical root
sequences and
physical root
sequences, see
3GPP TS 36.211.
Indicates the speed
flag of the cell. Set
this parameter to
HIGH_SPEED if the
cell is used to
provide coverage
for an ultra-high-
speed railway. Set
this parameter to
LOFD-001007 /
LOW_SPEED in
NO NO NO TDLOFD-001007
other scenarios.
LOFD-001008
TDD cells with a
bandwidth of 5 MHz
or in 8T8R mode
can only be
configured as low
speed cells. TDD
cells don't support
ULTRA_HIGH_SPE
ED mode.
Indicates the
preamble format
LBFD-002010 /
used in the cell. For NO NO NO
TDLBFD-002010
details, see 3GPP
TS 36.211.
Indicates the radius
of the cell, that is,
the farthest
distance that a cell
can cover under the
condition of keeping
certain network
performance. If this LBFD-002010 /
parameter is set to TDLBFD-002010
a value greater than NO NO NO LBFD-002010 /
100 km, the TDLBFD-002010 /
Extended Cell LOFD-081223
Access Radius
Beyond 100km
feature takes effect.
Only FDD cells can
be configured with
a radius more than
100 km.
Indicates whether
to configure a
customized
bandwidth for a cell.
A customized
bandwidth can be
configured only NO NO NO LOFD-001051
when a standard
bandwidth 1.4 MHz,
5 MHz, 10 MHz, 15
MHz, or 20 MHz
has been
configured.
Indicates a
customized uplink
bandwidth
configured for a
cell. A customized
bandwidth can be
configured only NO NO NO LOFD-001051
when a standard
bandwidth 1.4 MHz,
5 MHz, 10 MHz, 15
MHz, or 20 MHz
has been
configured.
Indicates a
customized
downlink bandwidth
configured for a
cell. A customized
bandwidth can be
configured only NO NO NO LOFD-001051
when a standard
bandwidth 1.4 MHz,
5 MHz, 10 MHz, 15
MHz, or 20 MHz
has been
configured.

LBFD-002029 /
TDLBFD-002029
Indicates whether
LOFD-001092 /
to set an NO NO NO
TDLOFD-001092
emergency area ID.
LBFD-002009 /
TDLBFD-002009
Indicates the ID of
the notification area
within which a
warning notification
LBFD-002029 /
is broadcast. The
TDLBFD-002029
area consists of
LOFD-001092 /
one or more cells NO NO NO
TDLOFD-001092
and can be
LBFD-002009 /
customized by
TDLBFD-002009
operators. For
details about this
parameter, see
3GPP TS 36.413.

Indicates whether
to configure the
maximum TX power
of the UE in the LBFD-002026 /
cell. If the value of TDLBFD-002026
NO NO NO
this parameter is LBFD-002009 /
not specified, the TDLBFD-002009
maximum power is
subject to the UE
capability.

Indicates the
maximum transmit
power that a UE
can apply to uplink
transmission in the
cell. It is used in cell
selection criterion S
LBFD-002026 /
to calculate the
TDLBFD-002026
compensated NO NO NO
LBFD-002009 /
power. If the value
TDLBFD-002009
of this parameter is
not specified, the
maximum power is
subject to the UE
capability. For
details, see 3GPP
TS 36.304.
 LOFD-003029 /
TDLOFD-001075
Indicates whether
TDLOFD-002008
to enable or disable
NO NO NO TDLOFD-001098
the multi-RRU cell
TDLOFD-001080
feature.
TDLOFD-001081
TDLOFD-001082
 LOFD-003029 /
TDLOFD-001075
LOFD-070205 /
Indicates the type
TDLOFD-002008
of the multi-RRU NO NO NO
TDLOFD-001098
cell.
TDLOFD-001080
TDLOFD-001081
TDLOFD-001082
NO_COMPRESSIO
N indicates that
CPRI compression
is not used. The
parameter value
NORMAL_COMPR
ESSION indicates
that CPRI
compression is
used. The
parameter value
ENHANCED_COM
PRESSION
indicates that
enhanced CPRI
compression is
used. If the eNodeB
is equipped with LOFD-001076 /
LBBPd boards and NO NO NO TDLOFD-001076 /
the CPRI data rate TDLOFD-081214
is 9.8 Gbit/s for LTE
FDD cells or the
CPRI data rate is
greater than 4.9
Gbit/s for LTE TDD
cells, the CPRI
compression type
of cells served by
RRUs in the same
RRU chain or ring
must be the same.
The LBBPc does
not support CPRI
compression, all
LBBP boards do
not support
enhanced CPRI
Indicates the
number of physical
cells consisting an
SFN cell. In macro
eNodeBs, this
parameter value
equals the number
of sector equipment
sets serving an
SFN cell. In
LampSite eNodeB,
this parameter
value equals the NO NO NO None
number of sector
equipment groups
serving an SFN cell.
In macro and
LampSite eNodeBs,
the parameter value
equals the sum of
the sector
equipment sets and
sector equipment
groups serving an
SFN cell.
Indicates whether
the cell is an air NO NO NO None
cell.
Indicates the
number of ports for
transmitting cell-
specific reference
signal (CRS). As
defined in 3GPP
specifications, this
parameter can be
set to
CRS_PORT_1,
CRS_PORT_2, or
CRS_PORT_4. The
LOFD-001001 /
value
TDLOFD-001001
CRS_PORT_1
LOFD-001003 /
indicates that one NO NO NO
TDLOFD-001003
CRS port (port 0) is
LOFD-001060 /
configured. The
TDLOFD-001060
value
CRS_PORT_2
indicates that two
CRS ports (ports 0
and 1) are
configured. The
value
CRS_PORT_4
indicates that four
CRS ports (ports 0,
1, 2, and 3) are
configured.
Indicates the
transmission and
NO YES NO None
reception mode of
the cell.

Indicates the user

NO NO NO None
label of the cell.
Indicates the work
LAOFD-00100101
mode of the cell.
LAOFD-00100102
The DL_ONLY
LAOFD-00100201
mode applies only NO NO NO
LAOFD-00100202
to the carrier
TDLAOFD-001003
aggregation
TDLAOFD-001002
scenario.

Indicates the active

or standby mode of
the cell. A cell is in
active mode by
default. If this
parameter is set to
STANDBY, an inter-
BBU SFN auxiliary
cell can roll back to LBFD-002009 /
NO NO NO
the standby mode TDLBFD-002009
to provide services
if inter-BBU faults
occur. Only
common cells, SFN
cells or
MPRU_AGGREGA
TION cells support
the standby mode.
configured for a cell
is "m" and the
number of CRS
ports is "n". The
parameter value
4TnP_abcd
indicates that
reference signals
transmitted over
CRS ports a, b, c,
and d are mapped
to TX channels 1, 2,
3, and 4 in an RRU,
respectively (The
TX channel number
here is for
reference only, and LOFD-001001 /
is determined TDLOFD-001001
based on the R0A LOFD-001003 /
NO NO NO
to R0D, or others). TDLOFD-001003
The parameter LOFD-001060 /
value TDLOFD-001060
8TnP_abcdefgh
indicates that
reference signals
transmitted over
CRS ports a to h
are mapped to TX
channels 1 to 8 in
an RRU,
respectively.
Duplicate numbers
of abcd or abcdefgh
indicates that virtual
antenna mapping
(VAM) is applied,
that is, the
reference signals
Indicates the
compression ratio
of data transmitted
on the CPRI port
over Ethernet for an
MPRU aggregation
cell. Data
compression on the
CPRI port over
Ethernet reduces
the bandwidth of
LTE data on the
Ethernet cable
NO NO NO None
between the RHUB
and MPRUs, and
therefore the
Ethernet cable
supports more
carriers of different
RATs. The
parameter values
2_TO_1, 3_TO_1,
and 4_TO_1
indicate ratios of
2:1, 3:1, and 4:1
respectively.
Indicates the state
NO NO YES None
of the cell instance.

Indicates the
reason that causes
the latest state
change of the cell,
NO NO YES None
which can be a cell
activation success
or a cell setup
failure.

Indicates the latest

setup time of the NO NO YES None
cell.
Indicates the latest
setup type of the NO NO YES None
cell.

Indicates the latest

remove time of the NO NO YES None
cell.
Indicates the latest
remove type of the NO NO YES None
cell.
Indicates the
energy
conservation and
emission reduction
mode of the cell.
The energy
conservation and
emission reduction
mode of the cell
can be set to RF
intelligent shutdown NO NO YES None
mode, intelligent
power-off of carriers
mode, low power
consumption mode,
RF module regular
time sleep mode,
inter-RAT cell
shutdown mode, or
dynamic adjust
voltage mode.

Indicates the
cabinet number,
subrack number
NO NO YES None
and slot number of
the primary BBP
that serves the cell.
Indicates the
NO NO YES None
topology of the cell.

Indicates the
cabinet number of
NO NO YES None
the RF module that
serves the cell.
Indicates the
subrack number of
NO NO YES None
the RF module that
serves the cell.
Indicates the slot
number of the RF
NO NO YES None
module that serves
the cell.

Indicates whether
the cell is in the
NO NO YES None
symbol power
saving state.
Indicates the
maximum transmit
power in a single
antenna channel of
the cell in theory.
The value 65535
indicates that this
parameter is invalid,
which can be
changed by NO NO YES None
modifying the
physical downlink
shared channel
(PDSCH)
configuration or the
PA parameter
related to power
control for the
PDSCH.

Indicates the ID of
NO NO YES None
the eNodeB.

Indicates the
cabinet number of
NO NO YES None
the BBP that serves
the cell.
Indicates the
subrack number of
NO NO YES None
the BBP that serves
the cell.

Indicates the slot

number of the BBP NO NO YES None
that serves the cell.

Indicates the work

status of the RF
NO NO YES None
module and BBP
that serves the cell.
Indicates the local
cell identity of the
NO NO YES None
uplink coordinating
cell.
Indicates slave
frequency bands of
a cell. If the
operating frequency
of a cell belongs to
multiple frequency
bands, the
frequency band
with the highest
priority is configured
by the FreqBand
parameter, and
frequency bands
with other priorities
are configured by
the CellSlaveBand
parameter and
added in
LBFD-070103 /
descending order NO YES NO
TDLBFD-00201806
based on frequency
band priorities. The
frequency band
priorities of a cell
are determined in
network planning. It
is recommended
that the frequency
bands supporting
UEs that comply
with 3GPP TS
36.331 V8.16.0,
3GPP TS 36.331
V9.1.0, 3GPP TS
36.331 V10.5.0, or
a later vision be
configured as slave
frequency bands.
Indicates the
frequency band in
which the cell
operates. For YES YES NO None
details about this
parameter, see
3GPP TS 36.104.
Indicates the ID of
the eNodeB
operator group that
shares the cell. This
parameter must be
set to a value within
the range of 0 and
5 if the eNodeB
works in hybrid
RAN sharing mode.
NO NO NO LOFD-070206
This parameter
must be set to 255
(indicating an
invalid value) in
independent RAN
sharing mode, RAN
sharing with
dedicated carriers,
or RAN sharing with
common carriers.

Indicates the
cabinet, subrack,
and slot where the NO NO YES None
RF module serves
the cell is located.

Indicates the
cabinet, subrack,
and slot of the
baseband NO NO YES None
processing unit on
which the cell is set
up is located.

Indicates the
number of cells
(each cell is served
by one RRU)
supported by the NO NO YES None
remaining
resources on the
primary baseband
processing board.

Indicates the
number of cells
(each cell is served
by two RRUs)
supported by the NO NO YES None
remaining
resources on the
primary baseband
processing board.
Indicates the
number of cells
(each cell is served
by three RRUs)
supported by the NO NO YES None
remaining
resources on the
primary baseband
processing board.

Indicates the
number of cells
(each cell is served
by four RRUs)
supported by the NO NO YES None
remaining
resources on the
primary baseband
processing board.

Indicates the
number of cells
(each cell is served
by five RRUs)
supported by the NO NO YES None
remaining
resources on the
primary baseband
processing board.

Indicates the
number of cells
(each cell is served
by six RRUs)
supported by the NO NO YES None
remaining
resources on the
primary baseband
processing board.

Indicates the
number of cells
(each cell is served
by seven RRUs)
supported by the NO NO YES None
remaining
resources on the
primary baseband
processing board.
Indicates the
quantity of
resources occupied
by the cell on the
primary baseband
NO NO YES None
processing board.
The resource
quantity is indicated
by the number of
RRUs.

Indicates the
number of cells for
which the
NO NO YES None
adjustment fails in
the one-click
manner.

Indicates the
number of cells for
which the
NO NO YES None
adjustment is
successful in the
one-click manner.

Indicates the
channel state
information (CSI)
reference signal
measurement
period. This
parameter is valid
only for LTE TDD
cells. Disuse
statement: This
parameter will be
replaced with the
CsiRsPeriod
parameter in the
CellCsiRsParaCfg
MO in
NO NO NO None
V100R010C00. In
this version, the
setting of this
parameter is still
synchronized
between the U2000
and the eNodeB
and can be
delivered to the
eNodeB, but it is no
longer used
internally.
Therefore, avoid
using this
parameter in
interfaces.
Indicates the
information about
the CPRI port on
the baseband
processing board
that is directly
connected to the NO NO YES None
RF unit serving a
cell. The
information includes
the cabinet,
subrack, slot, and
CPRI port numbers.
Indicates the TX
channel information
NO NO YES None
about the RF unit
that serves a cell.
Indicates the RX
channel information
NO NO YES None
about the RF unit
that serves a cell.
Indicates the IDs of
the primary and
secondary
NO NO YES None
baseband
processing boards
that serve a cell.
Indicates whether
an intra-frequency
neighboring cell is a
shared neighboring
cell. If this
parameter is set to
BOOLEAN_TRUE,
the serving
frequency is a
shared frequency,
and the shared
operator
information must be
checked on the
OSS before all
LOFD-
intra-frequency
NO NO NO 002001/TDLOFD-
neighboring cells
002001
are added. If this
parameter is set to
BOOLEAN_FALSE,
the serving
frequency is not a
shared frequency,
and the shared
operator
information does
not need to be
checked on the
OSS before all
intra-frequency
neighboring cells
are added.

Indicates whether
to enable ANR on
intra-frequency
neighboring cells
and external cells.
The value
ALLOWED LOFD-002001 /
NO NO NO
indicates that this TDLOFD-002001
type of ANR is
allowed. The value
NOT_ALLOWED
indicates that this
type of ANR is not
allowed.
Indicates whether
the DwPTS is
LBFD-002009
truncated for
TDLBFD-001007
transmission in
TDLBFD-00100701
TDD mode when
TDLBFD-00100702
SSP6 is used. This NO NO NO
TDLOFD-001026
parameter applies
TDLOFD-00102601
only to scenarios
TDLOFD-00102602
where a TDD cell is
TDLOFD-00102603
configured with
SA2+SSP6.

Indicates whether a
cell is a macro or
micro cell. It is
recommended that
a cell be configured
as a macro cell if its
actual maximum
transmit power is TDLAOFD-002001 /
greater than or NO NO NO LOFD-001099 /
equal to a threshold LAOFD-081233
(for example 10 W)
and configured as a
micro cell in other
cases. The
classification
standard can be
adjusted in practice.
priority 0, neighbor
relationships are
removed from the
NRT not based on
the priority but
based on the
number of
handovers. If the
number of
handovers to a cell
is the smallest, the
neighbor
relationship with
this cell is
preferentially
removed.
If all intra-RAT
frequencies are
LOFD-002001 /
assigned the same NO NO NO
TDLOFD-002001
non-zero priority,
neighbor
relationships are
removed also
based on the
number of
handovers. If there
are removable
neighboring cells
working on the
same frequency as
the new
neighboring cell to
be added, the
neighbor
relationship with a
cell that has the
smallest number of
Indicates the type
of the route
between the NO NO YES None
serving cell and the
coordinating cell.
Indicates the ID of
the eNodeB serving
NO NO YES None
the coordinating
cell.
Indicates the ID of
the coordinating
NO NO YES None
sector
equipment(group).
Indicates the ID of
the eNodeB
equipped with the NO NO YES None
coordinating sector
equipment(group).
Indicates the start
location of the cell
coverage. This
parameter is used
as calculate the
hysteresis in uplink NO NO NO LOFD-081223
timing when the
Extended Cell
Access Radius
Beyond 100km
feature takes effect.

coordination in
high-speed railway
scenarios. The
value of this
parameter can be
InterfHighSpeedSta
tus_NO_OP~0(Disa
ble),
InterfHighSpeedSta
tus_ACT~1(Run),
or
InterfHighSpeedSta
tus_RENEW~2(Res
tore).
When interference
coordination in
high-speed railway
scenarios is
disabled for a cell, NO NO YES None
the value of this
parameter is
InterfHighSpeedSta
tus_NO_OP~0(Disa
ble) in the
command output.
When this function
is being performed
in the cell, the value
of this parameter is
InterfHighSpeedSta
tus_ACT~1(Run).
When resources
are restored to
normal status, the
value of this
parameter is
InterfHighSpeedSta

Indicates the ID of
the serving sector NO NO YES None
equipment(group).
Indicates the ID of
the eNodeB
equipped with the NO NO YES None
serving sector
equipment(group).

Indicates the type

of sector Equipment
NO NO YES None
in the coordinating
cell.

Indicates the type

of sector Equipment NO NO YES None
in the serving cell.

Indicates the cell-

level channel
calibration type. If
channel calibration
fails (such as due to
NO NO YES None
a low SINR) in cells
served by
combined RRUs,
the antenna system
must be adjusted.

Indicates the end

time of a cell-level NO NO YES None
channel calibration.

Indicates the cell-

level channel NO NO YES None
calibration type.
Indicates the cell-
level channel
calibration index.
Results of a
maximum of 10
NO NO YES None
channel calibrations
can be displayed in
the DSP
CELLCALIBRATIO
N command output.

Indicates whether
the local cell is a
specified cell.
Configure this
parameter based
on operators'
policies. If this
parameter is set to
SPECSERCELL(Sp
ecified service cell),
the local cell is a
service-dedicated
cell. In this case,
UEs with SPIDs not
identified and SPID-
NO NO NO None
identified UEs with
the
SpecifiedUserFlag
parameter in the
SpidCfg MO set to
NONE(NONE) will
be transferred to
common cells. This
function is under
license control. If
this parameter is
set to
NONE(Normal cell),
the local cell is a
common cell.
Indicates the co-
RRU mode for
multiple cells. This
NO NO NO None
parameter applies
only to LTE TDD
networks.

Indicates the ID of
the sector device. It
uniquely identifies a TDLOFD-001080
YES YES NO
piece of sector TDLOFD-001082
equipment within an
eNodeB.

Indicates the ID of
YES YES NO None
the main eNodeB.
Indicates the local
cell ID of a cell of
the primary
eNodeB. It uniquely YES YES NO None
identifies a cell
within the primary
eNodeB.

Indicates the ID of
the baseband
equipment serving
a cell.
When this
parameter is set to
255, the baseband
equipment serving
a cell is not
specified. In this
scenario, the LTE
baseband
processing units
(LBBPs) serving a
cell are selected
among all LBBPs in
the eNodeB, and
TDLOFD-001080
the LBBPs to which NO NO NO
TDLOFD-001082
the cell's serving
RRU is connected
are preferentially
selected.
When this
parameter is set to
a value other than
255, the cell is
served by LBBPs in
the specified
baseband
equipment, and the
LBBPs to which the
cell's serving RRU
is connected are
preferentially
selected.
Indicates the
reference signal
power of the single
frequency network
(SFN) auxiliary
eNodeB resource.
The value 32767
indicates that this
reference signal TDLOFD-001080
NO NO NO
power parameter is TDLOFD-001082
invalid. In this case,
the reference signal
power of the cell
refers to the value
of the PDSCHCFG
parameter. For
details, see 3GPP
TS 36.213.

Indicates the
reference signal
power headroom of
each physical
antenna. If this
parameter is set to
0, the parameter
does not take
effect. That is, the
reference signal
power headroom of
the cell equals the
value of Reference
NO NO NO None
Signal Power
Margin in the
PDSCHCFG MO. If
this parameter is
set to a non-zero
value, the reference
signal power
headroom of the
cell equals this
value.This
parameter applies
only to LTE TDD
cells.
invalid. The
performance of
enhanced CPRI
compression is
better than the
performance of
normal CPRI
compression. If the
eNodeB is
equipped with
LBBPd boards and
the CPRI data rate
is 9.8 Gbit/s for LTE
FDD cells or the
CPRI data rate is
greater than 4.9
Gbit/s for LTE TDD
cells, the CPRI
TDLOFD-001076 /
compression type NO NO NO
TDLOFD-081214
of cells served by
RRUs in the same
RRU chain or ring
must be the same.
If this parameter
value is changed,
the cell served by
the sector
equipment group
automatically
resets. This
parameter is used
only when
MultiRruCellMode is
set to SFN or
CELL_COMBINATI
ON. This parameter
can be set based
Indicates whether
to automatically or
manually bind a
baseband
equipment ID to a
cell. To enable LOFD-001076 /
automatic binding, NO NO NO TDLOFD-001076 /
set this parameter TDLOFD-081214
to AUTO_MODE. To
enable manual
binding, set this
parameter to
MANUAL_MODE.
Indicates the ID of
the sector
equipment group
LOFD-081208
that serves the cell. YES YES NO
LOFD-081209
It uniquely identifies
a sector equipment
group within a cell.

Indicates the ID of
YES YES NO None
the main eNodeB.
Indicates the local
cell ID of a cell of
the primary
eNodeB. It uniquely YES YES NO None
identifies a cell
within the primary
eNodeB.

Indicates the ID of
the baseband
equipment serving
a cell.
When this
parameter is set to
255, the baseband
equipment serving
a cell is not
specified. In this
scenario, the LTE
baseband
processing units
(LBBPs) serving a
cell are selected
among all LBBPs in
the eNodeB, and
LOFD-081208
the LBBPs to which NO NO NO
LOFD-081209
the cell's serving
RRU is connected
are preferentially
selected.
When this
parameter is set to
a value other than
255, the cell is
served by LBBPs in
the specified
baseband
equipment, and the
LBBPs to which the
cell's serving RRU
is connected are
preferentially
selected.
Indicates the
reference signal
power of the single
frequency network
(SFN) auxiliary
eNodeB resource.
The value 32767
indicates that this
reference signal LOFD-081208
NO NO NO
power parameter is LOFD-081209
invalid. In this case,
the reference signal
power of the cell
refers to the value
of the PDSCHCfg
parameter. For
details, see 3GPP
TS 36.213.

Indicates the sector

equipment in the
sector equipment
group of an NO YES NO None
auxiliary eNodeB
supporting inter-
BBU SFN cells.

Indicates the ID of
the sector
YES YES NO None
equipment that
serves the cell.
invalid. The
performance of
enhanced CPRI
compression is
better than the
performance of
normal CPRI
compression. If the
eNodeB is
equipped with
LBBPd boards and
the CPRI data rate
is 9.8 Gbit/s for LTE
FDD cells or the
CPRI data rate is
greater than 4.9
Gbit/s for LTE TDD
cells, the CPRI
LOFD-081208
compression type NO NO NO
LOFD-081209
of cells served by
RRUs in the same
RRU chain or ring
must be the same.
If this parameter
value is changed,
the cell served by
the sector
equipment group
automatically
resets.
This parameter is
used only when
MultiRruCellMode is
set to SFN or
CELL_COMBINATI
ON. This parameter
can be set based
Indicates whether
to automatically or
manually bind a
baseband
equipment ID to a
cell. To enable
LOFD-081208
automatic binding, NO NO NO
LOFD-081209
set this parameter
to AUTO_MODE. To
enable manual
binding, set this
parameter to
MANUAL_MODE.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within a
eNodeB.

Indicates the ID of
the auxiliary YES YES NO None
eNodeB.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the PRB

usage threshold for
triggering inter-
frequency MLB for
low-efficiency UEs.
When the UE
quantity-related
trigger conditions
are met and the cell
load is greater than
or equal to the
value of this
parameter plus the
load offset, inter-
frequency MLB for
NO NO NO TDLOFD-081212
low-efficiency UEs
is triggered. When
the UE quantity-
related exit
conditions are met
or the cell load is
lower than the
value of this
parameter, inter-
frequency MLB for
low-efficiency UEs
stops. This
parameter applies
only to LTE TDD
cells.
threshold of the
number of
synchronized UEs
for triggering inter-
frequency MLB for
low-efficiency UEs.
When the PRB
usage-related
trigger conditions
are met and the
number of
synchronized UEs
in the local cell is
greater than or
equal to the value
of this parameter
plus the offset of
the minimum
number of UEs for NO NO NO TDLOFD-081212
MLB, inter-
frequency MLB for
low-efficiency UEs
is triggered. When
the PRB usage-
related exit
conditions are met
or the number of
synchronized UEs
in the local cell is
less than the value
of this parameter,
inter-frequency
MLB for low-
efficiency UEs
stops. This
parameter applies
only to LTE TDD
Indicates the PRB
usage threshold for
triggering RB
priority-based MCS
index selection.
When inter-
frequency MLB for
low-efficiency UEs
is enabled and the
PRB usage of the NO NO NO TDLOFD-081212
cell is less than the
value of this
parameter, RB
priority-based MCS
index selection is
performed. This
parameter applies
only to LTE TDD
cells.
Indicates the PRB
usage threshold for
stopping RB
priority-based MCS
index selection.
When inter-
frequency MLB for
low-efficiency UEs
is enabled and the
PRB usage of the
NO NO NO TDLOFD-081212
cell is greater than
or equal to the
value of this
parameter, RB
priority-based MCS
index selection is
not performed. This
parameter applies
only to LTE TDD
cells.
Indicates the
lowest-efficiency
downlink MCS
index threshold for
selecting low-
efficiency UEs for
MLB. The eNodeB
considers a UE as
a low-efficiency UE
when either of the
following conditions
are met:
The downlink MCS
index of the UE is
less than the value
NO NO NO TDLOFD-081212
of this parameter.
The downlink MCS
index of the UE is
greater than or
equal to the value
of this parameter
and is less than the
the value of the
LowEffDlMcsThd
parameter, and the
PRB usage-related
conditions are met.
This parameter
applies only to LTE
TDD cells.

Indicates the
downlink MCS
index threshold for
selecting low-
efficiency UEs for
MLB. The eNodeB
considers a UE as
a low-efficiency UE
when the PRB
usage-related
conditions are met
and the downlink NO NO NO TDLOFD-081212
MCS index of the
UE is greater than
or equal to the
value of the
LowestEffDlMcsThd
parameter and is
less than the value
of this parameter.
This parameter
applies only to LTE
TDD cells.
Indicates downlink
factor A for
selecting low-
efficiency UEs for
MLB. The eNodeB
considers a UE as
a low-efficiency UE
when the downlink
MCS index is less
than the value of
NO NO NO TDLOFD-081212
the
LowEffDlFactorK
parameter plus the
product of the UE's
PRB usage and the
value of this
parameter. This
parameter applies
only to LTE TDD
cells.

Indicates downlink
factor K for
selecting low-
efficiency UEs for
MLB. The eNodeB
considers a UE as
a low-efficiency UE
when the downlink
MCS index is less
than the value of NO NO NO TDLOFD-081212
this parameter plus
the product of the
UE's PRB usage
and the value of the
LowEffDlFactorA
parameter. This
parameter applies
only to LTE TDD
cells.
Indicates the
lowest-efficiency
uplink MCS index
threshold for
selecting low-
efficiency UEs for
MLB. The eNodeB
considers a UE as
a low-efficiency UE
when either of the
following conditions
are met:
The uplink MCS
index of the UE is
less than the value
of this parameter. NO NO NO TDLOFD-081212
The uplink MCS
index of the UE is
greater than or
equal to the value
of this parameter
and is less than the
uplink MCS index
threshold for low-
efficiency UEs, and
the PRB usage-
related conditions
are met.
This parameter
applies only to LTE
TDD cells.

Indicates the uplink

MCS index
threshold for
selecting low-
efficiency UEs for
MLB. The eNodeB
considers a UE as
a low-efficiency UE
when the PRB
usage-related
conditions are met
and the uplink MCS NO NO NO TDLOFD-081212
index of the UE is
greater than or
equal to the value
of the
LowestEffUlMcsThd
parameter and is
less than the value
of this parameter.
This parameter
applies only to LTE
TDD cells.
Indicates uplink
factor A for
selecting low-
efficiency UEs for
MLB. The eNodeB
considers a UE as
a low-efficiency UE
when the downlink
MCS index is lower
than the value of
NO NO NO TDLOFD-081212
the
LowEffUlFactorK
parameter plus the
product of the UE's
PRB usage and the
value of this
parameter. This
parameter applies
only to LTE TDD
cells.

Indicates uplink
factor K for
selecting low-
efficiency UEs for
MLB. The eNodeB
considers a UE as
a low-efficiency UE
when the uplink
MCS index is less
than the value of NO NO NO TDLOFD-081212
this parameter plus
the product of the
UE's PRB usage
and the value of the
LowEffUlFactorA
parameter. This
parameter applies
only to LTE TDD
cells.
Indicates the
proportion of TTIs
with heavy traffic
within a
measurement
period. This
parameter is used
to identify UEs with
heavy traffic in the
uplink. Within a
determination
period for
identifying UEs with
NO NO NO TDLOFD-081236
heavy traffic in the
uplink, if the
proportion of heavy-
load TTIs exceeds
the threshold
specified by this
parameter, the UE
is identified as a UE
with heavy traffic in
the uplink. This
parameter applies
only to LTE TDD
networks.

Indicates the
threshold of the
number of
synchronized UEs
in the uplink for
triggering uplink
heavy traffic-based
MLB. This
parameter applies
only to LTE TDD
networks.
If the number of
synchronized UEs
in the uplink is
greater than or NO NO NO TDLOFD-081236
equal to the
threshold specified
by this parameter
plus a certain offset,
uplink heavy traffic-
based MLB is
triggered. If the
number of
synchronized UEs
in the uplink is less
than this threshold,
uplink heavy traffic-
based MLB is
stopped.
Indicates the period
for identifying a UE
with heavy traffic in
the uplink. If a UE
meets the uplink
heavy traffic
NO NO NO TDLOFD-081236
determination
condition, MLB is
performed for the
UE. This parameter
applies only to LTE
TDD networks.

Indicates the cell ID

of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the
maximum number
of beamforming
layers, that is, the
rank of
beamforming. The
value
SINGLE_LAYER_B
F indicates single-
stream TDLOFD-001049
NO NO NO
beamforming (that TDLOFD-001061
is, beamforming
with the rank of 1),
and the value
DUAL_LAYER_BF
indicates dual-
stream
beamforming (that
is, beamforming
with the rank of 2).

Indicates the
eNodeB ID. This
NO NO YES None
parameter applies
only to TDD.
Indicates the
cabinet, subrack,
and slot numbers of
an RF module that NO NO YES None
serves a cell. This
parameter applies
only to TDD.

Indicates an RX
channel number of
an RF module that
NO NO YES None
serves a cell. This
parameter applies
only to TDD.
Indicates a TX
channel number of
an RF module that
NO NO YES None
serves a cell. This
parameter applies
only to TDD.
Indicates the CINR
of an RX channel.
This parameter NO NO YES None
applies only to
TDD.
Indicates the CINR
of a TX channel.
This parameter NO NO YES None
applies only to
TDD.
Indicates the weight
type used for dual-
stream
beamforming based
on the type of 8T8R
antennas. This NO NO NO TDLOFD-001061
parameter applies
only to LTE TDD
cells in which 8T8R
physical antennas
are used.

Indicates the
maximum number
of layers of UEs
that can be paired
for high-order multi-
user beamforming.
This parameter is
valid only if the
NO NO NO TDLAOFD-110221
HighOrderMubfSwit
ch check box is
selected under the
MuBfAlgoSwitch
parameter. This
parameter applies
only to LTE TDD
cells.
are as follows:
PRE_MU_PRI_PAI
R_RULE: Indicates
that UEs are paired
based on the
scheduling priority
of UEs before they
are paired. The
impact on the
network depends
on the scheduling
algorithm used by
the UE before
pairing.
POST_MU_PF_PRI
_PAIR_RULE:
Indicates that UEs
are paired by
considering the NO NO NO TDLAOFD-110221
channel quality and
whether the
scheduling priority
of UEs is optimal
after they are
paired. This pairing
rule helps achieve
comparatively
larger system
capacity.
POST_MU_EFF_P
RI_PAIR_RULE:
Indicates that UEs
are paired by
considering
whether the
spectral efficiency is
maximized after
Indicates the local
ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the initial
value of the target
IBLER except the
target IBLER when
the downlink target
IBLER adaption
TDLOFD-
and enhanced
NO NO NO 00101501/LOFD-
downlink target
00101501
IBLER adaption are
enabled. If this
parameter is set to
100, the CQI
adjustment amount
is not updated.

Indicates the initial TDLOFD-

value of the CQI NO NO NO 00101501/LOFD-
adjustment. 00101501
Indicates the
adjustment
TDLOFD-
efficiency of the
NO NO NO 00101501/LOFD-
baseline step in the
00101501
CQI adjustment
algorithm.

Indicates the CQI

filtering coefficient TDLOFD-
in the CQI NO NO NO 00101501/LOFD-
adjustment 00101501
algorithm.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates whether
to configure CSI-
RSs for UEs. If this
parameter is set to
NOT_CFG(Not
configure), the
eNodeB does not
configure CSI-RSs
for UEs. If this
parameter is set to
FIXED_CFG(Fixed
configure), the
eNodeB configures
CSI-RSs for UEs
that support CSI-
RSs. If this LOFD-001001
parameter is set to LOFD-001003
ADAPTIVE_CFG(A LOFD-001060
NO NO NO
DAPTIVE_CFG), TDLAOFD-
the eNodeB 00100114
determines whether TDLAOFD-081409
to configure CSI-
RSs for UEs that
support CSI-RSs
based on the
proportion of TM9
UEs. When
SfnLoadBasedAdpt
Switch is
deselected in a
TDD cell with
adaptive SFN
enabled, neither
FIXED_CFG nor
ADAPTIVE_CFG
takes effect.

LAOFD-080210
Indicates the LAOFD-080205 /
channel state TDLAOFD-
information (CSI) 00100113
NO NO NO
reference signal TDLAOFD-
(RS) measurement 00100114
period. TDLAOFD-080406
TDLAOFD-080407

Indicates whether
the CSI-RS is NO NO YES None
configured.
Indicates the
threshold for the
number of
RRC_CONNECTE
D UEs supporting
LOFD-001001
CSI_RS that is
LOFD-001003
used to evaluate a
LOFD-001060
change from the NO NO NO
TDLAOFD-
CSI-RS
00100114
unconfigured state
TDLAOFD-081409
to the CSI-RS
configured state
when adaptive CSI-
RS configuration is
adopted.
Indicates the
threshold for the
number of
RRC_CONNECTE
D UEs supporting LOFD-001001
CSI_RS that is LOFD-001003
used to evaluate a LOFD-001060
NO NO NO
change from the TDLAOFD-
CSI-RS configured 00100114
state to the CSI-RS TDLAOFD-081409
unconfigured state
when adaptive CSI-
RS configuration is
adopted.
Indicates the
threshold for the
ratio of
RRC_CONNECTE
D UEs supporting
LOFD-001001
CSI_RS that is
LOFD-001003
used to evaluate a
LOFD-001060
change from the NO NO NO
TDLAOFD-
CSI-RS
00100114
unconfigured state
TDLAOFD-081409
to the CSI-RS
configured state
when adaptive CSI-
RS configuration is
adopted.
Indicates the
threshold for the
ratio of
RRC_CONNECTE
D UEs supporting LOFD-001001
CSI_RS that is LOFD-001003
used to evaluate a LOFD-001060
NO NO NO
change from the TDLAOFD-
CSI-RS configured 00100114
state to the CSI-RS TDLAOFD-081409
unconfigured state
when adaptive CSI-
RS configuration is
adopted.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates whether
LOFD-070208
to enable CSPC in NO NO NO
TDLOFD-080203
the cell.
Indicates whether
to report the
changed sounding
reference signal
(SRS)
configurations of
UEs with CSPC
applied in the
serving cell to the NO NO NO LOFD-070208
centralized control
node immediately
after the
configurations are
changed. This
parameter applies
only to LTE FDD
cells.

Indicates the
interval at which the
local cell reports its
UE-specific SRS
configurations to
NO NO NO LOFD-070208
the centralized
control node. This
parameter applies
only to LTE FDD
cells.
Indicates the
interval at which
neighboring cells
report their uplink
reference signal
received power
NO NO NO LOFD-070208
(RSRP)
measurement
results to the local
cell. This parameter
applies only to LTE
FDD cells.

Indicates the
filtering coefficient
for channel quality
indicators (CQIs) in
LOFD-070208
CSPC-based power NO NO NO
TDLOFD-080203
optimization. This
filtering makes the
reported CQIs more
stable.

Indicates the
physical layer
filtering coefficient
for uplink reference
signal received
power (RSRP)
measurements.
NO NO NO LOFD-070208
This filtering
coefficient is used
to report stable
RSRPs after
filtering. This
parameter applies
only to LTE FDD.

Indicates the RRM

filtering coefficient
for uplink reference
signal received
power (RSRP)
measurements.
This filtering NO NO NO LOFD-070208
coefficient is used
to report stable
RSRPs after
filtering. This
parameter applies
only to LTE FDD.
Indicates whether
CSPC has been NO NO YES None
enabled in the cell.

Indicates the
reason why CSPC NO NO YES None
is disabled in a cell.

Indicates the Cell

type is Marco Cell
NO NO YES None
or Micro Cell in
CSPC.
Indicates inter-site
DL CoMP
status.This
NO NO YES None
parameter applies
only to LTE TDD
cells.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the
number of high-
band resource
blocks (RBs) that
the E-UTRAN cell
can share with
GERAN cells in
GSM and LTE
dynamic spectrum
sharing. The gains
that an E-UTRAN
cell can obtain have
a positive
correlation with the
number of RBs that
the E-UTRAN cell
shares with GERAN
cells. Currently, NO NO NO MRFD-090202
GSM and LTE
dynamic spectrum
sharing supports
one third of the E-
UTRAN cell
bandwidth to be
shared with GERAN
cells. However, to
mitigate the
interference from
GERAN cells, it is
recommended that
the shared
bandwidth should
not exceed one fifth
of the E-UTRAN
cell bandwidth.
Indicates the
number of low-band
resource blocks
(RBs) that the E-
UTRAN cell can
share with GERAN
cells in GSM and
LTE dynamic
spectrum sharing.
The gains that an
E-UTRAN cell can
obtain have a
positive correlation
with the number of
RBs that the E-
UTRAN cell shares
with GERAN cells.
NO NO NO MRFD-090202
Currently, GSM and
LTE dynamic
spectrum sharing
supports one third
of the E-UTRAN
cell bandwidth to be
shared with GERAN
cells. However, to
mitigate the
interference from
GERAN cells, it is
recommended that
the shared
bandwidth should
not exceed one fifth
of the E-UTRAN
cell bandwidth.
Indicates whether
PDCCH resource
elements (REs) are
transmitted in the
shared spectrum
when the spectrum
is being occupied
by the GERAN cell
in GSM and LTE
dynamic spectrum
sharing. If this
parameter is set to
ON, PDCCH REs
are not transmitted
in the shared NO NO NO MRFD-090202
spectrum when the
spectrum is being
occupied by the
GERAN cell. If this
parameter is set to
OFF, PDCCH REs
are always
transmitted in the
shared spectrum
regardless of
whether the shared
spectrum is being
occupied by the
GERAN cell.
Dynamic Spectrum
Sharing(LTE FDD)
feature.
The value NONE
indicates that UL
narrowband
interference is not
restricted.
The value
BASEBANDPROC
ESS indicates that
UL narrowband
interference is
restricted through
baseband
processing. The
interference scope
of GSM is
compressed and NO NO NO MRFD-090202
only RBs close to
the GSM spectrum
are affected. As a
result, RBs far away
from the GSM
spectrum and the
LTE spectrum can
work properly and
LTE performance
improves.
The value
ADAPTIVEPROCE
SS indicates UL
narrowband
interference is
restricted through
adaptive
processing. This
Indicates the offset
of a neighboring
cell's signal level
that triggers event
A3 used in GSM
and LTE dynamic
spectrum sharing.
Measurement
reports for this
event A3 are
reported only if the
NO NO NO MRFD-090202
signal level of at
least one
neighboring cell is
better than that of
the local cell by this
offset. If this
parameter is set to
a larger value, the
probability of UEs
reporting this event
A3 is lower.
Indicates the offset
of a neighboring
cell's signal level
that triggers event
A6 used in GSM
and LTE dynamic
spectrum sharing.
Measurement
reports for this
event A6 are
reported only if the
signal quality of at
least one
NO NO NO MRFD-090202
neighboring cell is
better than that of
the secondary
serving cell (SCell)
in carrier
aggregation (CA)
by a quantity of this
offset. If this
parameter is set to
a larger value, the
probability of UEs
reporting this event
A6 is lower.
Indicates the signal
to interference plus
noise ratio (SINR)
threshold used to
determine whether
UEs located at
short distances
away from the
center of the E-
UTRAN cell can
use resource blocks
(RBs) in the shared
spectrum when
GSM and LTE
NO NO NO MRFD-090202
dynamic spectrum
sharing is enabled.
If the SINR of RBs
in the shared
spectrum is greater
than or equal to the
NearAreaSinrThd
parameter value,
the RBs can be
used by UEs
located at short
distances away
from the center of
the E-UTRAN cell.
Indicates the signal
to interference plus
noise ratio (SINR)
threshold used to
determine whether
UEs located at
medium distances
away from the
center of the E-
UTRAN cell can
use resource blocks
(RBs) in the shared
spectrum when
GSM and LTE
NO NO NO MRFD-090202
dynamic spectrum
sharing is enabled.
If the SINR of RBs
in the shared
spectrum is greater
than or equal to the
MiddleAreaSinrThd
parameter value,
the RBs can be
used by UEs
located at medium
distances away
from the center of
the E-UTRAN cell.
Indicates the signal
to interference plus
noise ratio (SINR)
threshold used to
determine whether
UEs located at far
distances away
from the center of
the E-UTRAN cell
can use resource
blocks (RBs) in the
shared spectrum
when GSM and LTE
dynamic spectrum NO NO NO MRFD-090202
sharing is enabled.
If the SINR of RBs
in the shared
spectrum is greater
than or equal to the
FarAreaSinrThd
parameter value,
the RBs can be
used by UEs
located at far
distances away
from the center of
the E-UTRAN cell.

Indicates the mode

of configuring
interfering
neighboring cells
that work on the
same frequency as
the local cell. The
value ECOCONFIG
indicates that
interfering
neighboring cells
are configured by
NO NO NO MRFD-090202
the eCoordinator.
The value
ENODEBAIDCONF
IG indicates that the
eNodeB takes part
in the configuration;
under this setting,
intra-site intra-
frequency cells
must be bound to
the same baseband
processing unit.
Indicates the local
cell ID. It uniquely
YES YES NO None
identifies a cell
within an eNodeB.

Indicates the
statistic period of
dynamic access
class (AC) barring
in a cell, during LOFD-070207 /
NO NO NO
which the TDLOFD-070207
proportion of time
that the cell is in the
congestion state is
exported.

Indicates the
threshold for
triggering dynamic
access class (AC)
barring in the cell.
This threshold
specifies the
proportion of time
that the cell is in the
congestion state. If
the proportion of
time that the cell is LOFD-070207 /
NO NO NO
in the congestion TDLOFD-070207
state is greater than
or equal to this
parameter value
within a statistic
period (specified by
the
DynAcBarStatPerio
d parameter), the
conditions for
triggering dynamic
AC barring are met.
Indicates the
threshold for
canceling dynamic
access class (AC)
barring in the cell.
This threshold
specifies the
proportion of time
that the cell is in the
congestion state. If
the proportion of
time that the cell is LOFD-070207 /
NO NO NO
in the congestion TDLOFD-070207
state is less than or
equal to this
parameter value
within a statistic
period (specified by
the
DynAcBarStatPerio
d parameter), the
conditions for
canceling dynamic
AC barring are met.

Indicates the
number of periods
for triggering
intelligent access
barring on specific
services. If related
triggering
LOFD-008002 /
conditions are met NO NO NO
TDLOFD-008002
in consecutive
periods specified by
this parameter,
intelligent access
barring on specific
services is
triggered.
Indicates the
number of periods
for canceling
intelligent access
barring on specific
services. If related
cancellation
LOFD-008002 /
conditions are met NO NO NO
TDLOFD-008002
in consecutive
periods specified by
this parameter,
intelligent access
barring on specific
services is
canceled.
notifications (PNs)
in the earthquake
and tsunami
warning system
(ETWS) is used in
the disaster state
determination. The
PNs for ETWS do
not include PNs
used for ETWS
tests.
If this switch is on,
PNs in ETWS are
used in the disaster
state determination.
If this switch is off,
PNs in ETWS are
not used in the
LOFD-008002 /
disaster state NO NO NO
TDLOFD-008002
determination.
ETWS_PN_TEST:
Indicates whether
PNs for ETWS tests
are used in the
disaster state
determination.
If this switch is on,
PNs in ETWS tests
are used in the
disaster state
determination.
If this switch is off,
PNs in ETWS tests
are not used in the
disaster state
determination.
CMAS: Indicates
Indicates the
duration that the
cell is in the
disaster state. The
LOFD-008002 /
cell is out of the NO NO NO
TDLOFD-008002
disaster state after
the duration
specified by this
parameter ends.
Indicates the
number of
consecutive periods
for triggering
intelligent access
LOFD-070207 /
class control on NO NO NO
TDLOFD-070207
mobile-originated
(MO) calls or
signaling if related
triggering
conditions are met.

Indicates the
number of
consecutive periods
for canceling
intelligent access
LOFD-070207 /
class control on NO NO NO
TDLOFD-070207
mobile-originated
(MO) calls or
signaling if related
cancellation
conditions are met.

Indicates the local

cell identity. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the ABS
pattern after static
TDM eICIC is
enabled. This
parameter is valid
only when static
TDM eICIC is
enabled. Different
ABS pattern
settings indicate
different ABS
quantities and ABS
sequence numbers
in the same period.
For example, the
NO NO NO LAOFD-002001
value
SUBFRAME_ONE_
PER_FIVE for FDD
indicates one ABS
per 5 ms. The ABS
pattern is a bitmap
with 40 bits. For
details, see the
definition of ABS
Pattern Info in
3GPP TS 36.423.
All cells in the entire
network need to be
configured with the
same ABS pattern.
Indicates whether
UEs are allowed to
send measurement
reports for event A3
during enhanced
inter-cell
interference
coordination
(eICIC). The
parameter value
ENABLE indicates
that UEs are
allowed to send
measurement
NO NO NO LAOFD-002001
reports for event A3
during eICIC. The
parameter value
DISABLE indicates
that UEs are not
allowed to send
measurement
reports for event A3
during eICIC, and in
this case the
eNodeB cannot
determine whether
to enable eICIC in
different scenarios.
Indicates the offset
for event A3 during
enhanced inter-cell
interference
coordination
(eICIC). This offset
is the difference
between the signal
quality of a
neighboring cell
and that of the
serving cell. A larger
LAOFD-
value indicates that
NO NO NO 002001/LAOFD-
a neighboring cell
081233
must have better
signal quality for the
reporting of event
A3. A smaller value
indicates that the
requirement on the
neighboring cell
signal quality for
reporting event A3
can be met easier.
For details, see
3GPP TS 36.331.

Indicates the period

of adjusting the
ABS pattern of a
macro cell in
dynamic eICIC.
This parameter
must be configured
based on the
number of cells and
the load of X2
interfaces. It is
recommended that
NO NO NO LAOFD-081233
the ABS adjustment
period (unit: s) be
equal to the number
of macro cells of
the local eNodeB
multiplied by the
number of micro
cells in the local
macro cell. This
parameter is valid
only for FDD, not
for TDD.
Indicates the
minimum required
number of samples
for starting
automatic
configuration of
macro-micro
associations. A
micro cell collects
the sample
statistics in a
measurement
NO NO NO LOFD-090214
period only when
the number of
sample macro-cell
measurement
reports received by
the micro cell within
the period exceeds
or equals the value
of this parameter.
This parameter
takes effect only in
micro cells.

Indicates the
threshold used to
trigger automatic
configuration of
macro-micro
associations. The
macro-micro
association is
NO NO NO LOFD-090214
updated only if the
percentage of the
strongest macro cell
exceeds or equals
the threshold. This
parameter takes
effect only in micro
cells.
Indicates the
working mode for
automatic
configuration of
macro-micro
associations. If this
parameter is set to
AUTO, macro-micro
associations are
automatically
configured with no
need for manual
confirmation. If this NO NO NO LOFD-090214
parameter is set to
CONTROLLED, the
strongest macro cell
is reported to the
U2000 for manual
confirmation each
time before the
associations can be
configured. This
parameter takes
effect only in micro
cells.

Indicates the
measurement
period for automatic
configuration of
macro-micro
associations. The
micro cell counts
the number of times
each macro cell is
included in
measurement
reports within each
period. To prevent
network
performance NO NO NO LOFD-090214
deterioration for
UEs, the macro-
micro associations
are not updated
immediately when a
measurement
period approaches
its end. Instead, the
update is triggered
at the specified
start time. This
parameter takes
effect only in micro
cells.
Indicates the local
ID of a cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates a cell
frame offset mode.
CustomFrameOffse
t(Cell Frame
Offset): Indicates
that the cell frame
offset is user
defined. An FDD
cell can use only
this mode.
TL_FrameOffset(T-
L Dual Mode frame
offset): Indicates
that the cell frame
offset is
automatically
configured based
on the subframe
configuration type
NO NO NO None
in a TD-
SCDMA_TD-LTE
network.
TL_FrameOffset_S
A2_SSP5(T-L Dual
Mode SA2+SSP5
frame offset):
Indicates that the
cell frame offset is
automatically
configured based
on subframe
configuration type 2
and special
subframe
configuration type 5
in a TD-
SCDMA_TD-LTE
network.
Indicates the offset
of the start time of a
cell frame against a NO NO NO None
reference clock
source.

Indicates the local

cell ID. It uniquely
YES YES NO None
identifies a cell
within an eNodeB.

Indicates the offset

for reporting the
measurement event
for IICS UE
attribute calculation.
This offset is the
difference between
the signal quality of
a neighboring cell NO NO NO None
and that of the
serving cell. A larger
value indicates that
a neighboring cell
must have better
quality for the
reporting of the
event.
Indicates the
threshold of user
attribute
determination in the
UL IICS algorithm.
If a UE-reported
value is greater
than or equal to this
parameter value,
NO NO NO None
the UE has strong
interference to
neighboring cells. If
a UE-reported
value is less than
this parameter
value, the UE has
weak interference
to neighboring cells.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the switch

for the functionality
of the low power
consumption mode.
The cell can enter
LOFD-001040 /
the low power NO NO NO
TDLOFD-001040
consumption mode
only when this
parameter is set to
ON and specific
conditions are met.
Indicates the switch
for forcibly entering
the low power
consumption mode.
When both this
switch and the
functionality switch
are set to ON, the
cell enters the low
power consumption
mode as soon as
the wait time for
entering the mode
elapses, regardless
of whether it is
within the low
power consumption
LOFD-001040 /
period. When the NO NO NO
TDLOFD-001040
functionality switch
is set to ON but this
switch is set to OFF,
the cell enters the
low power
consumption mode
as soon as the wait
time for entering the
mode elapses, if a
mains input out of
range(Specific
Problem: AC
Failure) alarm is
reported within the
low power
consumption
period.

Indicates the start

time of the low LOFD-001040 /
NO NO NO
power consumption TDLOFD-001040
mode.

Indicates the stop

time of the low
power consumption
mode. If the stop
time is earlier than LOFD-001040 /
NO NO NO
or the same as the TDLOFD-001040
start time, the stop
time is assumed to
be a time of the
next day.
Indicates the
duration in which
the transmit power
LOFD-001040 /
for services is NO NO NO
TDLOFD-001040
reduced in the cell
in low power
consumption mode.

Indicates the
duration in which
the reference signal
LOFD-001040 /
transmit power is NO NO NO
TDLOFD-001040
reduced in the cell
in low power
consumption mode.

Indicates the
duration in which
RF channels are LOFD-001040 /
NO NO NO
shut down in the TDLOFD-001040
cell in low power
consumption mode.
Indicates the
percentage of the
transmit power for
services to the total
transmit power for
services when the LOFD-001040 /
NO NO NO
low power TDLOFD-001040
consumption mode
is implemented by
means of reducing
the transmit power
for services.

Indicates the
amount by which
the reference signal
LOFD-001040 /
transmit power is NO NO NO
TDLOFD-001040
reduced in the cell
in low power
consumption mode.
cell stays in normal
mode before
entering the low
power consumption
mode. In low power
consumption mode,
a cell automatically
takes the following
actions in
sequence: 1. lowers
the transmit power
for services; 2.
lowers the transmit
power for reference
signals; 3. shuts
down some RF
channels in the cell;
4. shuts down the
cell. This duration LOFD-001040 /
NO NO NO
smooths the TDLOFD-001040
transition from the
normal mode to the
low power
consumption mode
for the cell. If the
conditions for the
cell to enter the low
power consumption
mode are no longer
met during this
period of time, the
cell will not enter
the low power
consumption mode;
otherwise, it enters
the low power
consumption mode
and takes the
power degradation
are both 120
minutes, and the
maximum duration
of RF channel
intelligent shutdown
is 1440 minutes. If
this parameter is
set to POLICY2, the
duration of service
power degradation,
reference signal
power degradation,
and RF channel
intelligent shutdown
is all 120 minutes. If
this parameter is
set to POLICY1, the
LOFD-001040 /
duration of service NO NO NO
TDLOFD-001040
power degradation,
that of reference
signal power
degradation, and
that of RF channel
intelligent shutdown
are all 0 minutes. If
this parameter is
set to POLICY1,
POLICY2 or
POLICY3, the ratio
of available service
power to total
service power is
50%, the
adjustment offset
for reference signal
power is -1 dB, and

Indicates the local

cell identity. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the ID of
an MBSFN area to LOFD-070220 /
NO NO YES
which a cell TLOFD-070220
belongs.
Indicates the ID of
an MBSFN
LOFD-070220 /
synchronization NO NO NO
TDLOFD-070220
area to which a cell
belongs.

Indicates the TMGI

of an MBMS
session. The TMGI
consists of the
MCC, MNC, and
LOFD-070220 /
ServiceID with each NO NO YES
TLOFD-070220
two parts
connected by a
hyphen (-). TMGIs
are separated by
comma (,).

Indicates the switch

that is used to
enable and disable
the MBMS function.
If this switch is set
to ON, the MBMS
LOFD-070220 /
function is enabled, NO NO NO
TDLOFD-070220
and the cell
supports the MBMS
service. If this
switch is set to OFF,
the MBMS function
is disabled.

Indicates the list of

MBMS service LOFD-070220 /
NO YES NO
areas to which cells TLOFD-070220
belong.

Indicates the ID of
MBMS service area
YES YES NO None
to which a cell
belongs.
service continuity
can be maintained
in inter-frequency
networking by
turning on this
switch.
If this switch is on,
MBMS service
continuity can be
maintained. The
eNodeB broadcasts
SIB15 and
determines whether
to perform inter-
frequency
handovers for
MBMS service
continuity on an
RRC_CONNECTE NO NO NO LOFD-080215
D UE based on the
MBMS Interest
Indication message
sent by the UE. In
addition, the
eNodeB sends the
service area ID
(SAI) of the serving
cell to neighboring
cells over the X2
interface.
If this switch is off,
MBMS service
continuity is
disabled, the
eNodeB does not
broadcast SIB15,
perform inter-
GADAPTIVESWITC
H: Indicates
whether the
neighboring cell
configurations take
effect adaptively. In
the eMBMS feature,
the MBSFN
subframe
configuration for a
cell dynamically
changes based on
the MBMS session
setups. Neighboring
cell configurations
can be dynamically
updated based on
the changes of
LOFD-070220 /
MBSFN subframe NO NO NO
TLOFD-070220
configurations of
neighboring cells.
If this switch is on,
neighboring cell
configurations in
the local cell are
updated and
broadcast
according to the
MBSFN subframe
configurations of
the neighboring
cells transmitted
over X2 interfaces.
If this switch is off,
neighboring cell
configurations use
static parameter
Indicates the
dynamic list of
MBSFN service NO NO YES None
areas to which cells
belong.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the
priority of the UEs'
PRB load used as a
criterion for MLB-
oriented UE
selection. The
parameter value 0
indicates that the
PRB load is not
regarded as a
criterion for MLB-
oriented UE
selection, the
parameter value
255 indicates that
the PRB load is
regarded as a
mandatory criterion
for MLB-oriented
NO NO NO TDLOFD-001032
UE selection, and
the parameter value
ranging from 1 to
254 indicates that
the PRB load is
regarded as a
preferential criterion
for MLB-oriented
UE selection. A
larger value
indicates a higher
priority, and UEs
meeting the
criterion have a
higher priority to be
selected for MLB .
This parameter
applies only to LTE
TDD cells.
Indicates the
priority of the UEs'
QCI as a criterion
for MLB-oriented
UE selection. The
parameter value 0
indicates that the
QCI is not regarded
as a criterion for
MLB-oriented UE
selection, the
parameter value
255 indicates that
the QCI is regarded
as a mandatory
criterion for MLB-
NO NO NO TDLOFD-001032
oriented UE
selection, and the
parameter value
ranging from 1 to
254 indicates that
the QCI is regarded
as a preferential
criterion for MLB-
oriented UE
selection. A larger
value indicates a
higher priority, and
UEs meeting the
criterion have a
higher priority to be
selected for MLB.
Indicates the
priority of the UEs'
ARP as a criterion
for MLB-oriented
UE selection. The
parameter value 0
indicates that the
ARP is not
regarded as a
criterion for MLB-
oriented UE
selection, the
parameter value
255 indicates that
the ARP is regarded
as a mandatory
criterion for MLB- NO NO NO TDLOFD-001032
oriented UE
selection, and the
parameter value
ranging from 1 to
254 indicates that
the ARP is regarded
as a preferential
criterion for MLB-
oriented UE
selection. A larger
value indicates a
higher priority, and
UEs meeting the
criterion have a
higher priority to be
selected for MLB.
Indicates the
priority of the UEs'
downlink MCS as a
criterion for MLB-
oriented UE
selection. The
parameter value 0
indicates that the
downlink MCS is
not regarded as a
criterion for MLB-
oriented UE
selection, the
parameter value
255 indicates that
the downlink MCS
is regarded as a
mandatory criterion
for MLB-oriented
NO NO NO TDLOFD-001032
UE selection, and
the parameter value
ranging from 1 to
254 indicates that
the downlink MCS
is regarded as a
preferential criterion
for MLB-oriented
UE selection. A
larger value
indicates a higher
priority, and UEs
meeting the
criterion have a
higher priority to be
selected for MLB.
This parameter
applies only to LTE
TDD cells.

Indicates the ARP

threshold for
selecting UEs to be
transferred for MLB.
A UE is selected
only if the ARPs of
all the UE's
services is higher
than or equal to this
threshold. The
parameter value 1
NO NO NO TDLOFD-001032
indicates the
highest priority and
the parameter value
15 indicates the
lowest priority. If
this parameter is
set to a large value,
UEs with low
service priorities are
selected to perform
MLB.
Indicates the
downlink MCS
threshold for
selecting UEs to be
transferred for MLB.
A UE is selected
only if the downlink
MCS index of the
UE is greater than
or equal to this
NO NO NO TDLOFD-001032
threshold. If this
parameter is set to
a large value, UEs
with better downlink
channel quality are
selected to perform
MLB. This
parameter applies
only to LTE TDD
cells.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
handover, Ofs and
Ofn are the
frequency-specific
offsets for the
serving frequency
and neighboring
frequency
respectively, Ocs is
the cell-specific
offset for the
serving cell, and
Hys is the
hysteresis for intra-
frequency
handover.
If this parameter is
set to
NOT_CFG(Not
LOFD-002005 /
configure) and the NO NO NO
TDLOFD-002005
Inter-Freq HO
trigger Event Type
parameter is set to
EventA4(EventA4),
the upper and lower
limits of the CIO
adjustment range
for the cell in inter-
frequency MRO are
calculated by using
the following
formulas: Lower
limit = -24, Upper
limit < thresh + 110
- Ofn + Hys, where
thresh is the RSRP
threshold for
triggering a
Indicates the upper
limit of cell
individual offset
(CIO) adjustment
range for the cell in
mobility robustness
LOFD-002005 /
optimization (MRO). NO NO NO
TDLOFD-002005
This parameter
needs to be set
only when the
CioAdjLimitCfgInd
parameter is set to
CFG.

Indicates the lower

limit of cell
individual offset
(CIO) adjustment
range for the cell in
mobility robustness
LOFD-002005 /
optimization (MRO). NO NO NO
TDLOFD-002005
This parameter
needs to be set
only when the
CioAdjLimitCfgInd
parameter is set to
CFG.
Indicates the upper
limit used to adjust
the reference signal
LOFD-002005 /
received power NO NO NO
TDLOFD-002005
(RSRP) threshold
for triggering inter-
frequency event A2.

Indicates the lower

limit used to adjust
the reference signal
LOFD-002005 /
received power NO NO NO
TDLOFD-002005
(RSRP) threshold
for triggering inter-
frequency event A2.

Indicates the upper

limit used to adjust
the reference signal
received power LOFD-002005 /
NO NO NO
(RSRP) threshold TDLOFD-002005
for triggering A3-
oriented inter-
frequency event A2.

Indicates the lower

limit used to adjust
the reference signal
received power LOFD-002005 /
NO NO NO
(RSRP) threshold TDLOFD-002005
for triggering A3-
oriented inter-
frequency event A2.
this switch is on.
A3InterfreqA1Rsrp
Switch: Indicates
whether the RSRP
threshold for
triggering A3-
oriented inter-
frequency event A1
in the inter-
frequency handover
parameter group
can be adjusted.
The RSRP
threshold can be
adjusted only when
this switch is on.
A3InterfreqA2Rsrp
Switch: Indicates
whether the RSRP LOFD-002005 /
NO NO NO
threshold for TDLOFD-002005
triggering A3-
oriented inter-
frequency event A2
in the inter-
frequency handover
parameter group
can be adjusted.
The RSRP
threshold can be
adjusted only when
this switch is on.
InterfreqA3CioSwitc
h: Indicates
whether the cell
individual offset
(CIO) of the inter-
frequency
neighboring cell for
Indicates the local
cell ID. It uniquely
YES YES NO None
identifies a cell
within an eNodeB.
Indicates the SRS
power control
algorithm, which
can be SINR-based
SRS power control
algorithm or the
SRS power control NO NO NO TDLBFD-002026
algorithm based on
the converged
SINR and RSRP.
This parameter is
dedicated to LTE
TDD cells.
Indicates whether
the
P0NominalPUCCH
parameter affects
closed-loop power
control (CL PC) for
the PUCCH. If this
parameter is set to
NOT_USE_P0NOM
INALPUCCH, the
P0NominalPUCCH
parameter does not
affect CL PC for the NO NO NO LBFD-002026
PUCCH. If this
parameter is set to
USE_P0NOMINAL
PUCCH, the
reference signal
received power
(RSRP) cannot
exceed the
P0NominalPUCCH
parameter value in
CL PC for the
PUCCH.

Indicates the period

of power control for NO NO NO LBFD-002026
the PUCCH.
Indicates the offset
to the target signal
to interference plus
NO NO NO LBFD-002026
noise ratio (SINR)
in power control for
the PUCCH.

Indicates the upper

limit of RSRP in
closed-loop power
control for the
PUSCH. This
parameter takes
effect only when
PuschRsrpHighThd NO NO NO LBFD-002026
Switch of the
UlPcAlgoSwitch
parameter in the
CellAlgoSwitch MO
is on. This switch
applies only to LTE
FDD cells.
Indicates the offset
for reporting the
uplink PUSCH IoT-
based power
control
measurement
event. This offset is
the difference
between the signal
quality of a
neighboring cell
and that of the
serving cell. A larger
value indicates that
NO NO NO None
a neighboring cell
must have better
quality for reporting
the event. A smaller
value indicates that
the event can be
reported when a
neighboring cell has
worse quality. For
details, see 3GPP
TS 36.331. This
parameter is
dedicated to LTE
TDD cells.
Indicates whether
to enable IoT near
point optimization.
If this parameter is
set to OFF, the
eNodeB does not
deliver A3
measurements to
optimize the uplink
throughput of UEs
near the cell center
in scenarios with
strong interference
(the IoT value is
greater than 7 dB). NO NO NO TDLOFD-081219
If this parameter is
set to ON, the
eNodeB delivers A3
measurements to
optimize the uplink
throughput of UEs
near the cell center
in scenarios with
strong interference
(the IoT value is
greater than 7 dB).
This parameter
applies only to TDD
cells.
Indicates the path
loss threshold of
UEs to which the
event A3
measurement
configuration is sent
in IoT power
control-related CCU
uplink throughput
optimization when
the IoT is greater
than 7 dB. This
parameter is valid
only for LTE TDD
cells.
If the path loss of a NO NO NO TDLOFD-081219
UE is lower than
this threshold, the
eNodeB sends the
event A3
measurement
configuration to this
UE.
If the path loss of a
UE is higher than
this threshold, the
eNodeB does not
send the event A3
measurement
configuration to this
UE.
Indicates the target
SINR value for SRS
power control. A
large target SINR
value increases the
transmit power of
UEs, which causes
interference on
neighboring cells. A
small target SINR
value decreases
the transmit power
of UEs, which leads
to poor uplink SRS
receive
NO NO NO TDLBFD-002026
performance of the
local cell. If the
inter-cell
interference is
strong, set this
parameter to a
small value. If the
SRS receive
performance of the
local cell is poor, set
this parameter to a
large value. This
parameter applies
only to LTE TDD
cells.
Indicates the target
RSRP value for
SRS power control.
A large target
RSRP value
increases the
transmit power of
UEs, which causes
interference on
neighboring cells. A
small target RSRP
value decreases
the transmit power
of UEs, which leads
to poor uplink SRS
receive NO NO NO TDLBFD-002026
performance of the
local cell. If the
inter-cell
interference is
strong, set this
parameter to a
small value. If the
SRS receive
performance of the
local cell is poor, set
this parameter to a
large value. This
parameter applies
only to LTE TDD
cells.
Indicates the
transmit power
spectral density for
the PUSCH of
normal UEs when
the
SchedulerCtrlPower
Switch(SchedulerCt
rlPowerSwitch)
check box under
the UlSchSwitch
parameter is
selected.
The larger the value
of this parameter,
the higher the TDLOFD-00101502
NO NO NO
transmit power TDLBFD-002026
spectral density for
the PUSCH of
normal UEs. If this
parameter is set to
ADAPTIVE, the
eNodeB
automatically
adjusts the transmit
power spectral
density of these
UEs based on the
network load.This
parameter applies
only to LTE TDD
cells.
for the PUSCH is
enabled.
If this parameter is
set to Normal,
optimized closed-
loop power control
is enabled for all
UEs near the cell
center.
If this parameter is
set to Us, optimized
closed-loop power
control is enabled
only for UEs near
the cell center
running unlimited
services.
If this parameter is
set to ULBigPkt, NO NO NO TDLDBF-002026
optimized closed-
loop power control
is enabled only for
UEs near the cell
center running
services with large
packets in the
uplink.
If this parameter is
set to
UsOrUlBigPkt,
optimized closed-
loop power control
is enabled for UEs
near the cell center
running unlimited
services and those
running services
Indicates the target
BLER to be
approached after
optimized closed-
loop power control
NO NO NO TDLDBF-002026
is enabled for UEs
near the cell center.
This parameter
applies only to LTE
TDD cells.
Indicates the
transmit power
spectral density for
the PUSCH of UEs
running unlimited
services when the
SchedulerCtrlPower
Switch(SchedulerCt
rlPowerSwitch)
check box under
the UlSchSwitch
parameter is
selected.
The larger the value
of this parameter,
the higher the NO NO NO TDLDBF-002026
transmit power
spectral density for
the PUSCH of UEs
running unlimited
services. If this
parameter is set to
SAME AS NS, the
transmit power
spectral density of
these UEs is the
same as that of
Normal UEs. This
parameter applies
only to LTE TDD
cells.
Indicates whether
to enable noise and
interference
correction for
interference-based
NO NO NO TDLOFD-081219
uplink power
control. This
parameter applies
only to LTE TDD
cells.

Indicates the path

loss threshold for
identifying CEUs
used for
interference
coordination in the
NO NO NO TDLOFD-081219
interference-based
uplink power control
function. This
parameter applies
only to LTE TDD
cells.
Indicates the
interference
threshold for
triggering
interference-based
NO NO NO TDLOFD-081219
uplink power
control. This
parameter applies
only to LTE TDD
cells.
Indicates the type
of UEs near the cell
center to which the
PUSCH power
increase applies.
If this parameter is
set to
AllUser(AllUser),
the PUSCH power
increase applies to
all UEs near the cell
NO NO NO LBFD-002026
center.
If this parameter is
set to
UlBigPktUser(UlBig
PktUser), the
PUSCH power
increase applies to
all large-packet UEs
near the cell center.
This option applies
only to LTE FDD.
PhichInnerLoopPcS
witch is enabled.
When the network
is heavily loaded
with a large number
of UEs, setting this
parameter to a
proper value
decreases
interference on
neighboring cells
caused by CCUs
running voice
services in the local
cell, and improves
the quality of voice
services performed
by CEUs in
LBFD-002026 /
neighboring cells. If NO NO NO
TDLBFD-002026
this parameter is
set to 0, the
optimization
scheme does not
apply to UEs
running voice
services. If this
parameter is set to
a value less than 0,
the PUSCH SINR
high threshold of
UEs running voice
services decreases
and the SINR high
threshold decision
value is changed. In
LTE TDD, this
parameter is valid
Indicates the local
cell ID. It uniquely
YES YES NO None
identifies a cell
within an eNodeB.
This parameter
takes effect only
when Mobility Load
Balancing Trigger
Mode is set to
PRB_ONLY(PrbMo
de) or
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode) and Prb
Load Calculation
Method is set to
PRB_VALUATION_
WITH_CTRL or
PRB_VALUATION_
NO_CTRL. If the
number of uplink
synchronized UEs
in a cell is greater
NO NO NO TDLOFD-001032
than or equal to the
sum of the
MlbMinUeNumThd
parameter value
and the
MlbMinUeNumOffs
et parameter value,
and the cell load is
higher than the
threshold, MLB is
triggered. If the
number of uplink
synchronized UEs
in a cell is smaller
than the
MlbMinUeNumThd
parameter value
and the cell load is
lower than the
frequency MLB
based on the PRB
evaluation value in
the target cell. This
parameter takes
effect only when
Mobility Load
Balancing Trigger
Mode is set to
PRB_ONLY(PrbMo
de) or
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode) and Prb
Load Calculation
Method is set to
PRB_VALUATION_
WITH_CTRL or
PRB_VALUATION_ NO NO NO TDLOFD-001032
NO_CTRL. If the
PRB evaluation
value of a
neighboring cell is
smaller than this
threshold, the load
from the cell can be
transferred to the
neighboring cell. If
the PRB evaluation
value of a
neighboring cell is
greater than or
equal to this
threshold, the load
from the cell cannot
be transferred to
the neighboring

Indicates the
threshold of UE-
specific PRB
evaluation for
selecting UEs for
MLB. A UE is
transferred for MLB
based on PRB
evaluation only
NO NO NO TDLOFD-001032
when the downlink
or uplink PRB
evaluation of the
UE is higher than
the value of this
parameter. This
parameter is
dedicated to LTE
TDD cells.
Indicates the
filtering coefficient
used to calculate
the PRB evaluation
value. The filtering
value is calculated
by weighting the
measured PRB
evaluation value
and history filtering
value based on the
filtering coefficient.
If this parameter is NO NO NO TDLOFD-001032
set to a small value,
the filtering value is
close to the history
filtering value. If this
parameter is set to
a large value, the
filtering value is
close to the
measured value.
This parameter
applies only to LTE
TDD cells.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the
threshold of the
distance between a
UE and the eNodeB
for determining
whether a
contention-based
preamble sent by
the UE is a PRACH
false alarm. If this
parameter is set to
0, the eNodeB does
not consider a
preamble as a false
alarm based on the
distance. If this
parameter is set to LBFD-002010 /
NO NO NO
a non-zero value TDLBFD-002010
and the eNodeB
detects that the
distance is longer
than this parameter
value, the preamble
is considered as a
false alarm. The
distance is
calculated based on
the timing advance
(TA) of the
contention-based
preamble that the
eNodeB received
for the first time
from a UE.
Indicates the
percentage by
which the physical
random access
channel (PRACH)
false alarm
detection threshold
increases. For
example, the value
x indicates that the LBFD-002010 /
NO NO NO
system-defined TDLBFD-002010
PRACH false alarm
detection threshold
increases by x%,
and the value -x
indicates that the
system-defined
PRACH false alarm
detection threshold
decreases by x%.

Indicates the MNC

of a conflict cell. A
PLMN ID is
composed of an
MCC and an MNC.
The MCC consists
LOFD-002015 /
of three digits. The NO NO YES
TDLOFD-002015
MNC consists of
two to three digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the
eNodeB ID of a
conflict cell located
in the same PLMN
as the local cell. A
local cell ID and an
eNodeB ID
compose a 28-bit
E-UTRAN cell ID,
where the eNodeB
LOFD-002015 /
ID is represented NO NO YES
TDLOFD-002015
by the 20 most
significant bits. An
E-UTRAN cell ID
and a PLMN ID
compose an E-
UTRAN CGI
(ECGI). For details
about this
parameter, see
3GPP TS 36.413.
Indicates the ID of
the cell that
conflicts with the
local cell. It
uniquely identifies a
cell within an
eNodeB. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell ID in the most LOFD-002015 /
NO NO YES
significant eight bits TDLOFD-002015
and the eNodeB ID.
The E-UTRAN cell
identity and the
PLMN ID forms the
E-UTRAN cell
global identifier
(ECGI). For details
about this
parameter, see
3GPP TS 36.413.

Indicates the MCC

of a conflict cell. A
PLMN ID is
composed of an
MCC and an MNC.
The MCC consists
LOFD-002015 /
of three digits. The NO NO YES
TDLOFD-002015
MNC consists of
two to three digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the period
for an eNodeB to
avoid PRACH
interference. This
parameter is used
to control the speed
of PRACH
frequency domain
position adjustment
to prevent ping-
pong adjustments NO NO NO None
due to interference
fluctuation. This
parameter applies
only to the
TDLOFD-081217
Interference
Detection and
Restraining
Enhancement
feature.

Indicates the
threshold for an
eNodeB to
determine whether
PRACH
interference is
severe. When the
value of PRACH
interference (per
PRB) is greater
than or equal to the
value of this
parameter, an NO NO NO None
eNodeB determines
that PRACH
interference is
severe. This
parameter applies
only to the
TDLOFD-081217
Interference
Detection and
Restraining
Enhancement
feature.
parameter is used
with the Prach
Interference
Threshold
parameter to
determine weak
PRACH
interference and
moderate PRACH
interference. When
the value of
PRACH
interference is less
than the value of
Prach Interference
Threshold minus
the value of Prach
Interference
Hysteresis, the NO NO NO None
eNodeB determines
that PRACH
interference is
weak. When the
value of PRACH
interference is
greater than or
equal to the value
of Prach
Interference
Threshold minus
the value of Prach
Interference
Hysteresis and less
than the value of
Prach Interference
Threshold, the
eNodeB determines
Indicates the local
cell ID. It uniquely
YES YES NO None
identifies a cell
within a BS.

Indicates the
Allocation and
Retention Priority
(ARP) threshold for
the Golden-level
services. A service
is defined as a
Golden-level LBFD-002023 /
NO NO NO
service if its ARP TDLBFD-002023
value is smaller
than or equal to this
threshold. The
service priority has
a negative
correlation with the
ARP value.
Indicates the
Allocation and
Retention Priority
(ARP) threshold for
the Silver-level
services. A service
is defined as a
Silver-level service
if its ARP value is
smaller than or
equal to the value
of this parameter
and is larger than LBFD-002023 /
NO NO NO
the value of TDLBFD-002023
GoldServiceArpThd
. A service is
defined as a
Bronze-level
service if its ARP
value is larger than
the value of this
parameter. The
service priority has
a negative
correlation with the
ARP value.

Indicates the
admission threshold
for the handed-over
service with QCI of
1. This threshold
applies to both UL
and DL.
If the satisfaction
rate of services with
QCI of 1 is above or
equal to this
LBFD-002023 /
threshold, the NO NO NO
TDLBFD-002023
handed-over
service with QCI of
1 can be admitted.
If the satisfaction
rate of services with
QCI of 1 is below
this threshold, the
handed-over
service with QCI of
1 cannot be
admitted.
Indicates the
admission threshold
for the handed-over
service with QCI of
2. This threshold
applies to both UL
and DL.
If the satisfaction
rate of services with
QCI of 2 is above or
equal to this
LBFD-002023 /
threshold, the NO NO NO
TDLBFD-002023
handed-over
service with QCI of
2 can be admitted.
If the satisfaction
rate of services with
QCI of 2 is below
this threshold, the
handed-over
service with QCI of
2 cannot be
admitted.

Indicates the
admission threshold
for the handed-over
service with QCI of
3. This threshold
applies to both UL
and DL.
If the satisfaction
rate of services with
QCI of 3 is above or
equal to this
LBFD-002023 /
threshold, the NO NO NO
TDLBFD-002023
handed-over
service with QCI of
3 can be admitted.
If the satisfaction
rate of services with
QCI of 3 is below
this threshold, the
handed-over
service with QCI of
3 cannot be
admitted.
Indicates the
admission threshold
for the handed-over
service with QCI of
4. This threshold
applies to both UL
and DL.
If the satisfaction
rate of services with
QCI of 4 is above or
equal to this
LBFD-002023 /
threshold, the NO NO NO
TDLBFD-002023
handed-over
service with QCI of
4 can be admitted.
If the satisfaction
rate of services with
QCI of 4 is below
this threshold, the
handed-over
service with QCI of
4 cannot be
admitted.

Indicates the offset

for admission of
new gold-level
services. This
parameter applies
to both downlink
and uplink. New
gold-level services
and handed-over
services with QCI N
are admitted if both
the following
conditions are met:
(1) The satisfaction
rate of services with
QCI N is higher LBFD-002023 /
NO NO NO
than or equal to the TDLBFD-002023
sum of this offset
and the admission
threshold for the
handed-over
services with QCI
N. (2) The
satisfaction rate of
services with any
other QCI is higher
than or equal to the
corresponding
admission threshold
for the handed-over
services with that
QCI.
Indicates the offset
for admission of
new silver-level
services. This
parameter applies
to both downlink
and uplink. New
silver-level services
and handed-over
services with QCI N
are admitted if both
the following
conditions are met:
(1) The satisfaction
rate of services with
QCI N is higher LBFD-002023 /
NO NO NO
than or equal to the TDLBFD-002023
sum of this offset
and the admission
threshold for the
handed-over
services with QCI
N. (2) The
satisfaction rate of
services with any
other QCI is higher
than or equal to the
corresponding
admission threshold
for the handed-over
services with that
QCI.
Indicates the offset
for admission of
new bronze-level
services. This
parameter applies
to both downlink
and uplink. New
bronze-level
services and
handed-over
services with QCI N
are admitted if both
the following
conditions are met:
(1) The satisfaction
rate of services with
LBFD-002023 /
QCI N is higher NO NO NO
TDLBFD-002023
than or equal to the
sum of this offset
and the admission
threshold for the
handed-over
services with QCI
N. (2) The
satisfaction rate of
services with any
other QCI is higher
than or equal to the
corresponding
admission threshold
for the handed-over
services with that
QCI.
Indicates the
congestion
threshold for
services with QCI of
1. This threshold
applies to both UL
and DL.
If the satisfaction
rate of services with
QCI of 1 in the cell
becomes lower
than this threshold,
the services with LBFD-002024 /
NO NO NO
QCI of 1 enter the TDLBFD-002024
congested state.
If the satisfaction
rate of services with
QCI of 1 in the cell
becomes higher
than the sum of this
threshold and the
congestion relief
offset, the services
with QCI of 1 leave
the congested
state.
Indicates the
congestion
threshold for
services with QCI of
2. This threshold
applies to both UL
and DL.
If the satisfaction
rate of services with
QCI of 2 in the cell
becomes lower
than this threshold,
the services with LBFD-002024 /
NO NO NO
QCI of 2 enter the TDLBFD-002024
congested state.
If the satisfaction
rate of services with
QCI of 2 in the cell
becomes higher
than the sum of this
threshold and the
congestion relief
offset, the services
with QCI of 2 leave
the congested
state.
Indicates the
congestion
threshold for
services with QCI of
3. This threshold
applies to both UL
and DL.
If the satisfaction
rate of the services
with QCI of 3 in the
cell becomes lower
than this threshold,
the services with LBFD-002024 /
NO NO NO
QCI of 3 enter the TDLBFD-002024
congested state.
If the satisfaction
rate of services with
QCI of 3 in the cell
becomes higher
than the sum of this
threshold and the
congestion relief
offset, the services
with QCI of 3 leave
the congested
state.
Indicates the
congestion
threshold for
services with QCI of
4. This threshold
applies to both UL
and DL.
If the satisfaction
rate of services with
QCI of 4 in the cell
becomes lower
than this threshold,
the services with LBFD-002024 /
NO NO NO
QCI of 4 enter the TDLBFD-002024
congested state.
If the satisfaction
rate of services with
QCI of 4 in the cell
becomes higher
than the sum of this
threshold and the
congestion relief
offset, the services
with QCI of 4 leave
the congested
state.
Indicates the
congestion release
offset. The service
of a specific QCI
exits the congestion
state if the
satisfaction rate of
the service exceeds
the sum of this
congestion release
offset and the
congestion LBFD-002024 /
NO NO NO
threshold for the TDLBFD-002024
QCI. The service
retains the
congestion state if
the satisfaction rate
is below or equal to
the sum of this
congestion release
offset and the
congestion
threshold for the
QCI.
Indicates the
threshold for
deciding on
whether the UL RB
usage is high. This
threshold applies to
LBFD-002023 /
UL admission
TDLBFD-002023
decision. If the UL NO NO NO
LBFD-002024 /
RB usage reported
TDLBFD-002024
by the MAC layer is
above this
threshold, the UL
RB usage is
assumed to be
high.
Indicates the
threshold for
deciding on
whether the UL RB
usage is low. It
LBFD-002023 /
applies to UL
TDLBFD-002023
admission decision. NO NO NO
LBFD-002024 /
If the UL RB usage
TDLBFD-002024
reported by the
MAC layer is below
this threshold, the
UL RB usage is
assumed to be low.

Indicates the UE
numbers reserved
for UEs initiating
emergency calls
and high-priority
UEs. If this
parameter is set to
0, no UE number is
reserved for UEs
initiating emergency
LBFD-002023 /
calls and high- NO NO NO
TDLBFD-002023
priority UEs. A non-
zero value of this
parameter
represents the
maximum UE
number reserved
for UEs initiating
emergency calls
and high-priority
UEs.
Indicates the
reserved number of
LOFD-090206 /
VoLTE UEs that can NO NO NO
TDLOFD-110219
be preferentially
admitted.

Indicates a timer
used for
determining NO NO NO None
whether a user is a
VoLTE user.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates whether
to enable or disable
RF channel
intelligent shutdown
for the cell. RF
channel intelligent LOFD-001039 /
NO NO NO
shutdown can be TDLOFD-001039
performed in the
cell only when this
parameter is set to
ON and certain
conditions are met.

Indicates the start

time of the cell RF LOFD-001039 /
NO NO NO
channel intelligent TDLOFD-001039
shutdown.

Indicates the stop

time of RF channel
intelligent shutdown
for the cell. If the
stop time is earlier LOFD-001039 /
NO NO NO
than or the same as TDLOFD-001039
the start time, the
stop time is
assumed to be a
time of the next day.

Indicates the value

by which the
reference signal
power is increased
during the RF
channel intelligent
shutdown period.
The reference
signal power
increases by the
LOFD-001039 /
value specified by NO NO NO
TDLOFD-001039
this parameter to
ensure coverage of
the cell. If this
parameter is set to
a value greater than
3, the value 3
applies in effect.
Otherwise,the
configuration value
applies in effect.
less than or equal
to both the uplink
PRB usage
threshold and
downlink PRB
usage threshold,
the cell enters the
RF channel
intelligent shutdown
mode. The cell exits
the RF channel
intelligent shutdown
mode when the cell
load reaches 100%
or when either of
the following
conditions are met:
(1) The current cell
load is greater than
NO NO NO TDLOFD-001039
the sum of the
uplink PRB
threshold and
uplink PRB offset;
(2) The sum of the
downlink PRB
threshold and
downlink PRB
offset.
A smaller value of
this parameter
results in more
difficulty for the cell
to enter the RF
channel intelligent
shutdown mode,
which does not
facilitate eNodeB
power saving. A
to both the uplink
PRB usage
threshold and
downlink PRB
usage threshold,
the cell enters the
RF channel
intelligent shutdown
mode. The cell exits
the RF channel
intelligent shutdown
mode when the cell
load reaches 100%
or when either of
the following
conditions are met:
(1) The current cell
load is greater than
the sum of the NO NO NO TDLOFD-001039
uplink PRB
threshold and
uplink PRB offset;
(2) The sum of the
downlink PRB
threshold and
downlink PRB
offset.
A smaller value of
this parameter
results in more
difficulty for the cell
to enter the RF
channel intelligent
shutdown mode,
which does not
facilitate eNodeB
power saving. A
(PRB) offset for RF
channel intelligent
shutdown.
The cell exits the
RF channel
intelligent shutdown
mode when the cell
load reaches 100%
or when either of
the following
conditions are met:
(1) The current cell
load is greater than
the sum of the
uplink PRB
threshold and
uplink PRB offset;
(2) The sum of the
downlink PRB
NO NO NO TDLOFD-001039
threshold and
downlink PRB
offset.
A smaller value of
this parameter
leads to less
difficulty for the cell
in exiting the RF
channel intelligent
shutdown mode
and a higher
probability of ping-
pong RF channel
shutdown. A larger
value of this
parameter leads to
more difficulty for
the cell in exiting
the RF channel
for RF channel
intelligent
shutdown.
The cell exits the
RF channel
intelligent shutdown
mode when the cell
load reaches 100%
or when either of
the following
conditions are met:
(1) The current cell
load is greater than
the sum of the
uplink PRB
threshold and
uplink PRB offset;
(2) The sum of the
downlink PRB
NO NO NO TDLOFD-001039
threshold and
downlink PRB
offset.
A smaller value of
this parameter
leads to less
difficulty for the cell
in exiting the RF
channel intelligent
shutdown mode
and a higher
probability of ping-
pong RF channel
shutdown. A larger
value of this
parameter leads to
more difficulty for
the cell in exiting
the RF channel
(2) the uplink cell
load is less than or
equal to the pre-
defined uplink
physical resource
block (PRB) usage;
(3) the downlink cell
load is less than or
equal to the pre-
defined downlink
PRB usage. RF
channel intelligent
shutdown is
disabled in the cell
if one of the
following conditions
is met: (1) the
number of UEs in
RRC_CONNECTE
NO NO NO LOFD-001039
D mode is greater
than this parameter
value; (2) the uplink
cell load is greater
than the sum of
uplink PRB usage
and uplink PRB
offset; (3) the
downlink cell load is
greater than the
sum of downlink
PRB usage and
downlink PRB
offset.
If this parameter is
set to a smaller
value, the cell is
harder to enter the
RF channel
Indicates the
current status about
RF channel NO NO YES None
intelligent shutdown
for a cell.
Indicates the latest
exiting cause about
RF channel NO NO YES None
intelligent shutdown
for a cell.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the switch
for the remote
interference
cancellation
algorithm. If this
switch is turned on,
the eNodeB
performs remote
interference
detection and
NO NO NO None
records in call
history record
(CHR) logs if any
interference is
detected. If this
switch is turned off,
the eNodeB does
not perform remote
interference
detection.

Indicates the
number of empty
symbols in an
uplink pilot timeslot
(UpPTS). If this
parameter is set to
a non-zero value N,
then no data is
TDLBFD-001007
transmitted within
TDLBFD-00100701
the N symbols
TDLBFD-00100702
starting from the
NO NO NO TDLOFD-001026
first symbol in the
TDLOFD-00102601
UpPTS. Note that,
TDLOFD-00102602
for any given
TDLOFD-00102603
special subframe
configuration, the
value of this
parameter cannot
be greater than the
total number of
symbols contained
in the UpPTS.
Indicates whether
to empty the last
symbol in each
uplink subframe.If
TDLBFD-001007
this parameter is
TDLBFD-00100701
set to ON(On), the
TDLBFD-00100702
last symbol in each
NO NO NO TDLOFD-001026
uplink subframe is
TDLOFD-00102601
emptied. If this
TDLOFD-00102602
parameter is set to
TDLOFD-00102603
OFF(Off), the last
symbol in each
uplink subframe is
not emptied.

Indicates the local

cell identity. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
reported using the
extended GTP-U
headers to the
EPC. The guideline
can be found in
documents related
to the EPC feature,
which is Wireless
Optimization Based
on Flow Priority.
FPIGTPUSwitch:
Indicates whether
to enable the
service
differentiation
feature using the
extended GTP-U
header containing
the FPI value. The NO NO NO None
guideline can be
found in documents
related to the EPC
feature, which is
Wireless
Optimization Based
on Flow Priority.
DSCPRemarkSwitc
h: Indicates
whether to enable
the DSCP Remark-
based service
differentiation
feature. If
DSCPRemarkSwitc
h is set to On, the
eNodeB guarantees
differentiated quality
Indicates the
threshold for
determining the cell
congestion status
based on the
physical resource
block (PRB) usage.
The eNodeB
generates a cell NO NO NO None
congestion indicator
based on this
parameter and the
CellConStateUeNu
mThd parameter
and then sends the
indicator to the
EPC.
Indicates the
threshold for
determining the cell
overload status
based on the
physical resource
block (PRB) usage.
The eNodeB
generates a cell NO NO NO None
overload indicator
based on this
parameter and the
CellConStateUeNu
mThd parameter
and then sends the
indicator to the
EPC.
Indicates the
threshold for
determining the cell
congestion status
based on the
uplink-synchronized
UE number. The
eNodeB generates
a cell congestion NO NO NO None
indicator based on
this parameter and
the
CellConStatePrbTh
d parameter and
then sends the
indicator to the
EPC.
Indicates the
threshold for
determining the cell
overload status
based on the
uplink-synchronized
UE number. The
eNodeB generates
a cell overload NO NO NO None
indicator based on
this parameter and
the
CellConStatePrbTh
d parameter and
then sends the
indicator to the
EPC.
Indicates the weight
of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
probability of this
UE. The scheduling
probability and
priority of services
in a queue has a NO NO NO None
positive correlation
with the value of
this parameter. This
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) or
DSCPRemarkSwitc
h(DSCPRemarkSwi
tch) is turned on.
When
DSCPRemarkSwitc
h is turned on, this
parameter indicates
the weight of
nonP2P service
queue.
Indicates the weight
of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
probability of this
UE. The scheduling
probability and
priority of services
NO NO NO None
in a queue has a
positive correlation
with the value of
this parameter. This
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) or
DSCPRemarkSwitc
h(DSCPRemarkSwi
tch) is turned on.
When
DSCPRemarkSwitc
h is turned on, this
parameter indicates
the weight of P2P
service queue.
Indicates the weight
of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
NO NO NO None
probability of this
UE. The scheduling
probability and
priority of services
in a queue has a
positive correlation
with the value of
this parameter. This
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) is
turned on.

Indicates the weight

of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
NO NO NO None
probability of this
UE. The scheduling
probability and
priority of services
in a queue has a
positive correlation
with the value of
this parameter. This
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) is
turned on.
Indicates the weight
of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
NO NO NO None
probability of this
UE. The scheduling
probability and
priority of services
in a queue has a
positive correlation
with the value of
this parameter. This
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) is
turned on.

Indicates the weight

of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
NO NO NO None
probability of this
UE. The scheduling
probability and
priority of services
in a queue has a
positive correlation
with the value of
this parameter. This
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) is
turned on.
Indicates the weight
of the queue, which
is used in service
differentiation
scheduling. The
value of this
parameter is used
in calculating the
priority of a UE
during scheduling
and therefore
determines the
scheduling
NO NO NO None
probability of this
UE. The scheduling
probability and
priority of services
in a queue has a
positive correlation
with the value of
this parameter. This
parameter is valid
only if
FPIGTPUSwitch(FP
IGTPUSwitch) is
turned on.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates whether
to enable or disable
intelligent power-off
of carriers in the
same coverage.
Intelligent power-off
of carriers in the
same coverage can
be performed only
when this
parameter is set to
ON and specific LOFD-001042 /
NO NO NO
conditions are met. TDLOFD-001042
For intelligent
power-off of carriers
in the same
coverage, each
basic cell must
have its intelligent
power-off of carriers
switch enabled and
the UL or DL PRB
usage threshold set
to 0.
Indicates the start
time of intelligent
LOFD-001042 /
power-off of carriers NO NO NO
TDLOFD-001042
in the same
coverage.

Indicates the stop

time of intelligent
power-off of carriers
in the same
coverage. If the
LOFD-001042 /
stop time is earlier NO NO NO
TDLOFD-001042
than or the same as
the start time, the
stop time is
assumed to be a
time of the next day.
Indicates the
downlink PRB
threshold for
starting intelligent LOFD-001042 /
NO NO NO
power-off of carriers TDLOFD-001042
in the same
coverage for the
cell.

Indicates the
downlink PRB offset
for stopping
intelligent power-off
of carriers in the
same coverage for
the cell. The
downlink PRB
threshold for
stopping intelligent
power-off of carriers LOFD-001042 /
NO NO NO
in the same TDLOFD-001042
coverage for the
cell is equal to the
sum of the downlink
PRB threshold for
starting intelligent
power-off of carriers
in the same
coverage and the
value of this
parameter.

Indicates the uplink

PRB threshold for
starting intelligent
LOFD-001042 /
power-off of carriers NO NO NO
TDLOFD-001042
in the same
coverage for the
cell.
Indicates the uplink
PRB offset for
stopping intelligent
power-off of carriers
in the same
coverage for the
cell. The uplink
PRB threshold for
stopping intelligent
power-off of carriers
LOFD-001042 /
in the same NO NO NO
TDLOFD-001042
coverage for the
cell is equal to the
sum of the uplink
PRB threshold for
starting intelligent
power-off of carriers
in the same
coverage and the
value of this
parameter.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
channel of another
RAT during
camping or
activation, and then
returned to the LTE
system after
listening. If the
eNodeB schedules
the single radio
LTE-capable UE
when the UE is
absent from the
LTE system and
listens to the paging
channel of another
RAT, RB resources
are wasted. Based
on scheduling
optimization on
NO NO NO LOFD-080212
single radio LTE-
capable UEs, the
eNodeB uses DTX
detection to
distinguish single
radio LTE-capable
UEs that leaves the
LTE system and
listens to the paging
channel of another
RAT, and then stops
scheduling these
UEs.
If this parameter is
set to ON,
scheduling
optimization on
single radio LTE-
capable UEs is
Indicates the
threshold for the
number of
consecutive times
that a single radio
LTE-capable UE
experiences
discontinuous
transmission (DTX),
including DTX times
on the PUSCH and
PDSCH.
If the number of
consecutive times
that a single radio
LTE-capable UE
experiences DTX
reaches this
threshold, the NO NO NO LOFD-080212
eNodeB determines
that the UE is
absent from the
LTE mode and
listens to the paging
channel of another
RAT, and therefore
the eNodeB stops
scheduling the UE
for a period of time
specified by the
SrlteSuspendTime
parameter. This
parameter takes
effect only when the
SrlteSwitch
parameter is set to
ON.
Indicates the period
of time during which
the eNodeB does
not schedule a
single radio LTE-
capable UE
because the UE is
NO NO NO LOFD-080212
absent from the
LTE mode. This
parameter takes
effect only when the
SrlteSwitch
parameter is set to
ON.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the offset
for the UL ICIC
measurement
event. If this
parameter is set to
a large value, the
signal quality of the
neighboring cell LBFD-00202202 /
must be NO NO NO TDLBFD-00202202
significantly better LOFD-00101402
than that of the
serving cell before
a UL ICIC
measurement event
is triggered. For
details, see 3GPP
TS 36.331.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
proportional fair
(PF), round Robin
(RR), and
enhanced
proportional fair
(EPF). The MAX C/I
policy schedules
UEs in descending
order of average
signal to
interference plus
noise ratio (SINR).
The PF policy
schedules UEs in
ascending order of
ratio of the data
rate to the SINR.
The RR policy LBFD-002025 /
schedules each UE TDLBFD-002025
NO NO NO
in sequence, and TDLOFD-001015
therefore each UE TDLOFD-00101502
has an equal
opportunity to be
scheduled. The
EPF policy
schedules UEs in
ascending order of
priority. In EPF, the
priority of an UE is
calculated based on
the following
factors: the data
rate, average SINR,
QoS-satisfying data
rate for each
service, and service
differentiation
requirements of the
SW_OFF, UL data
is retransmitted by
non-adaptive
synchronous
HARQ. If this switch
is set to
ADAPTIVE_HARQ_
SW_ON, UL data is
retransmitted by
adaptive
synchronous
HARQ. If this switch
is set to
ADAPTIVE_HARQ_
SW_SEMION,
adaptive HARQ is
triggered when a LBFD-002006 /
UL grant is TDLBFD-002006
delivered to an NO NO NO TDLBFD-002025
HARQ process that TDLOFD-001015
is previously TDLOFD-00101502
suspended due to
reasons such as
resource collision,
activation of a
measurement gap,
and PDCCH
congestion. Setting
this parameter to
ADAPTIVE_HARQ_
SW_ON helps
reduce resource
consumption due to
retransmission,
increase the cell
throughput, and
prevent
Indicates the target
IBLER of the SINR
adjustment
algorithm. A greater
LBFD-001006 /
parameter value
NO NO NO TDLBFD-001006
indicates a greater
TDLOFD-001006
SINR adjustment
value, and thus a
higher-level MCS is
used.

Indicates the ratio

of the maximum
bandwidth
resources that the
LOFD-00101502 /
uplink scheduler NO NO NO
TDLOFD-00101502
can allocate to
preallocation UEs
to the total system
bandwidth.
Indicates the
minimum interval
between two pre-
allocations. That is,
the actual interval
LOFD-00101502 /
between two pre- NO NO NO
TDLOFD-00101502
allocations of one
UE must be longer
than or equal to the
value of this
parameter.

Indicates the data

amount pre- LOFD-00101502 /
NO NO NO
allocated to each TDLOFD-00101502
user.
Indicates whether
frequency hopping
(FH) is enabled or
disabled and which
FH type is used.
Hopping_OFF:
indicates that FH is
disabled.
Hopping_Type1:
indicates that
adaptive FH is
enabled and FH
type 1 is used. In
this scenario, UEs
in the cell can
determine whether
to use FH based on LBFD-002025 /
the actual situation. TDLBFD-002025
NO NO NO
Hopping_Type2: LOFD-001015 /
indicates that TDLOFD-001015
adaptive FH is
enabled and FH
type 2 is used. In
this scenario, UEs
in the cell can
determine whether
to use FH based on
the actual situation.
Hopping_Type2_R
ANDOM: indicates
that random FH is
enabled and FH
type 2 is used. In
this scenario, all
UEs in the cell use
FH.
Indicates the
percentage of free
shared RBs on the
PUSCH in
scheduling based
on free users and
subscribers. The
other RBs on the
PUSCH are
allocated to
subscribers. When
sufficient capacity is
available, the
percentage of RBs
occupied by free
users and that
TDLBFD-002023
occupied by NO NO NO
TDLBFD-002024
subscribers will
reach the preset
values. Changes in
this parameter
affect the
percentage of RBs
for free users and
that for subscribers.
The value of this
parameter cannot
be changed when
the cell is
active.This
parameter applies
only to LTE TDD
cells.
Indicates the data
length that the UL
scheduler assigns
to UEs that have
sent scheduling
LOFD-00101502 /
requests. Within the NO NO NO
TDLOFD-00101502
data length, the
UEs reports their
buffer status and
transmit certain
data.

Indicates the
threshold for the
number of
consecutive zero-
payload packets
received by the
eNodeB. After
receiving
consecutive zero- LOFD-00101502 /
NO NO NO
payload packets of TDLOFD-00101502
a number that is
equal to the value
of this parameter,
the eNodeB
performs implicit
release of semi-
persistent
resources.
Indicates the
duration of uplink
smart preallocation
triggered by
downlink
scheduling. If
SmartPreAllocation
Switch is set to On LOFD-00101502 /
and this parameter NO NO NO TDLOFD-00101502
is set to 0, neither TDLOFD-001015
smart preallocation
nor preallocation
takes effect. If
SmartPreAllocation
Switch is set to Off,
this parameter is
invalid.

Indicates the
capacity factor for
uplink enhanced
proportional fair
(EPF) scheduling.
When the eNodeB
schedules UEs with
unsatisfied GBR,
this factor affects
the scheduling
priorities of UEs
running services
with the QCI of 1, 2,
3, or 4. When the LOFD-00101502 /
NO NO NO
eNodeB schedules TDLOFD-00101502
UEs running Non-
GBR services, this
factor affects the
scheduling priorities
of UEs running
services with the
QCI of 6, 7, 8, or 9.
In this way, this
factor can be used
to adjust the cell
capacity and
fairness among
UEs.
Indicates the
strategy for
allocating resource
blocks (RBs) in the
uplink of the cell. If
this parameter is
set to
FS_NONFS_ADAP
TIVE, this strategy
adaptively switches
between frequency
selective
scheduling and LOFD-00101502 /
NO NO NO
non-frequency TDLOFD-00101502
selective
scheduling. If this
parameter is set to
FS_INRANDOM_A
DAPTIVE, this
strategy adaptively
switches between
frequency selective
scheduling and
interference-
randomization-
based scheduling.
Indicates the
Doppler
measurement level,
which is used for
selecting a Doppler
measurement
policy. If this
parameter is set to
CLASS_0, the
demodulation
reference signal
(DMRS) whose
signal to
interference plus
noise ratio (SINR) is
LOFD-00101502 /
greater than or NO NO NO
TDLOFD-00101502
equal to 5 dB is
used in Doppler
measurement. If
this parameter is
set to CLASS_1,
the DMRS whose
SINR is greater
than or equal to –5
dB is used in
Doppler
measurement. This
parameter does not
take effect on cells
established on an
LBBPc.
services with a QCI
of 1, the smaller
value between the
parameter value
and 5 is used as
the maximum
number of uplink
HARQ
transmissions.
When the UE does
not run services
with a QCI of 1, the
parameter value is
used as the
maximum number
of uplink HARQ
transmissions. This
parameter has
LBFD-
coupling
NO NO NO 002025/TDLBFD-
relationships with
002025
the
ENodeBAmReorder
ingTimer or the
ENodeBUmReorder
ingTimer parameter.
When the
UlHarqMaxTxNum
parameter is set to
7, it is
recommended that
the
ENodeBAmReorder
ingTimer or
ENodeBAUmReord
eringTimer
parameter be set to
a value greater than
or equal to 50 ms.
Indicates the smart
preallocation
duration for sparse
packets. The larger
value between this
parameter and the
LOFD-00101502 /
SmartPreAllocation NO NO NO
TDLOFD-00101502
Duration parameter
is selected as the
actual smart
preallocation
duration for sparse
packets.
Indicates the semi-
persistent
scheduling period in
the uplink. This
parameter applies
only to LTE TDD
cells. In FDD mode,
the uplink semi-
persistent
scheduling period is
20 ms and cannot
be configured. If
this parameter is
set to ADAPTIVE, NO NO NO TDLOFD-001016
the system
adaptively selects
an uplink semi-
persistent
scheduling period
of 20 ms or 40 ms.
If this parameter is
set to ms20 or
ms40, the downlink
semi-persistent
scheduling period is
20 ms or 40 ms,
respectively.
Indicates whether
to increase the
scheduling request
indicator (SRI) false
detection threshold
for UEs in the
discontinuous
reception (DRX)
state. If this
parameter is set to LBFD-002003 /
NO NO NO
ON, the threshold TDLBFD-002003
increases and the
SRI false detection
probability
decreases. If this
parameter is set to
OFF, both the
threshold and the
probability remain
unchanged.

Indicates the
number of
consecutive
transmission time
intervals (TTIs)
within which the
LOFD-00101502 /
eNodeB does not NO NO NO
TDLOFD-00101502
perform uplink
scheduling after a
measurement gap.
This parameter
applies only to LTE
FDD networks.
adjusted based on
VoIP packet delays
during uplink
dynamic
scheduling, thereby
increasing the
mean opinion score
(MOS) and system
capacity for VoIP
services when the
cell is heavily
loaded with VoIP
services. If this
parameter is set to
VOIP_DELAYSCH_
DIVISION(VoIP
Service-based
Delay Scheduling),
LOFD-00101502 /
VoIP services and
NO NO NO TDLOFD-00101502
non-VoIP services
LOFD-081229
are distinguished
during delay-based
uplink dynamic
scheduling and
VoIP service-
triggered SR
scheduling can be
identified. In this
way, the MOS and
system capacity for
VoIP services
increase when the
cell is heavily
loaded with VoIP
services. The
VOIP_DELAYSCH_
DIVISION(VoIP
Service-based
Indicates the
threshold of
consecutive cyclic
redundancy check
(CRC) errors in the LOFD-00101502 /
uplink above which TDLOFD-00101502
NO NO NO
the eNodeB stops LBFD-002025 /
scheduling the TDLBFD-002025
abnormal UE. The
parameter value
range is from 6 to
120.
Indicates the size
threshold for
determining
whether a packet is
a special packet.
This parameter can
be set based on the
size of special small
packets, such as
heartbeat packets.
This parameter is
used to reduce the
impact of services
with small packets
on the calculation of
performance
counters related to
NO NO NO None
uplink throughput.
Changing this
parameter value
affects values of
counters
L.Thrp.Time.UE.UL.
RmvSpecificTTI
and
L.Thrp.bits.UE.UL.S
pecificTTI. For
details about the
impact, see the
"Measurement
Point" of the
counters in eNodeB
Performance
Counter Reference.

Indicates whether
to enable
scheduling request
(SR) masking in
logical channels for
UEs complying with
3GPP Release 9 or
later when the
SpsSchSwitch
option under the
UlSchSwitch
LOFD-001016 /
parameter is NO NO NO
TDLOFD-001016
selected. If this
parameter is set to
ON(On), SR
masking in logical
channels is
enabled. If this
parameter is set to
OFF(Off), SR
masking in logical
channels is
disabled.
Indicates the
scheduling policy
for the initial
PUSCH
transmission that is
detected as
discontinuous
transmission (DTX)
when
PuschDtxSwitch of
the UlSchSwitch
parameter is on. If
the
PuschDtxSchStrate
gy parameter is set
to NEW_TX, initial
transmission
instead of
LOFD-00101502 /
retransmission is NO NO NO
TDLOFD-00101502
performed when the
initial PUSCH
transmission is
detected as DTX. If
the
PuschDtxSchStrate
gy parameter is set
to
ADAPTIVE_RETX,
adaptive
retransmission is
performed when the
initial PUSCH
transmission is
detected as DTX.
This parameter
does not apply to
LTE TDD.
Indicates whether
to apply upper limit
control on service
data unit (SDU)
segmentation at the
radio link control
(RLC) layer in the
uplink for VoIP
services scheduled
in non-TTI bundling
mode and the
maximum SDU
segments at the
RLC layer.
If this parameter is
set to 0, the upper
limit control on SDU
segmentation at the
RLC layer is LOFD-00101502 /
NO NO NO
disabled in the TDLOFD-00101502
uplink for VoIP
services scheduled
in non-TTI bundling
mode.
If this parameter is
set to a non-zero
value X, upper limit
control on SDU
segmentation at the
RLC layer is
enabled and a
maximum of X SDU
segments that can
be divided for VoIP
services in uplink
dynamic scheduling
in non-TTI bundling
mode.
adopting uplink
dynamic scheduling
when the
scheduling interval
is greater than the
uplink scheduling
interval threshold
for VoLTE UEs.
This ensures timely
uplink scheduling
on VoLTE UEs even
when SR missing
detections occur,
thereby avoiding
packet loss caused
by the expiration of
the PDCP packet
LOFD-00101502 /
discarding timer.
TDLOFD-00101502
UlVoipServStateEn
NO NO NO LOFD-001016
hancedSw:
LOFD-001048
Indicates whether
LOFD-081229
to enable enhanced
determination of
VoLTE service
states (either in talk
spurts or silent
period) in the
uplink. If this option
is deselected,
enhanced
determination is
disabled. If this
option is selected,
enhanced
determination is
enabled. Selecting
this option shortens
the determination
Indicates the signal
to interference plus
noise ratio (SINR)
threshold under
which interference-
based frequency
selective resource
allocation is
enabled in the LOFD-00101502 /
NO NO NO
uplink. This TDLOFD-00101502
parameter takes
effect only when
UlInterfFssSwitch of
the UlSchSwitch
parameter is on.
This parameter
applies only to LTE
FDD networks.
(calculated by the
RSRP of the
neighboring cell
minus the RSRP of
the serving cell). If
this largest
downlink RSRP
difference is greater
than the
UlCamcDlRsrpOffs
et parameter value,
the neighboring cell
is added to the
interference
measurement set.
If UL CoMP is
enabled, this
LOFD-
parameter setting
081206/TDLOFD-
does not take effect NO NO NO
110205
and the co-BBP
TDLOFD-110206
neighboring cell
that has the
strongest RSRP
and is in the
candidate
coordinated cell set
is added to the
interference
measurement set.
For LTE TDD cells:
The interference
measurement sets
of UEs are
maintained based
on this parameter
value after the
downlink RSRP
statistic times
during which the
channel quality of a
UE consistently
meets conditions
for entering
transmission time
interval (TTI)
bundling. Before a
UE enters TTI
bundling, the
eNodeB performs
statistic on the
channel quality of
the UE at the
interval of 20 ms or
longer. If the
number of statistic
times during which LOFD-001048 /
NO NO NO
the channel quality TDLOFD-001048
of the UE
consistently meets
conditions for
entering TTI
bundling is greater
than this parameter
value, the UE
enters TTI bundling.
This parameter
helps delay the time
for entering TTI
bundling and
decrease the
probability of
unnecessary TTI
bundling entering
caused by wireless
signal fluctuation.
statistic times
during which the
channel quality of a
UE consistently
meets conditions
for exiting from
transmission time
interval (TTI)
bundling. Before a
UE exits from TTI
bundling, the
eNodeB performs
statistic on the
channel quality of
the UE at the
interval of 20 ms or
longer. If the
number of statistic
times during which LOFD-001048 /
NO NO NO
the channel quality TDLOFD-001048
of the UE
consistently meets
conditions for
exiting from TTI
bundling is greater
than this parameter
value, the UE exits
TTI bundling. This
parameter helps
delay the time for
UEs to exit from TTI
bundling and
decrease the
probability of
unnecessary exit
from TTI bundling
caused by wireless
signal fluctuation.
Indicates the
hysteresis of the
signal to
interference plus
noise ratio (SINR)
threshold for exiting
from transmission
time interval (TTI)
bundling against
the SINR threshold
for entering TTI LOFD-001048 /
NO NO NO
bundling. The TDLOFD-001048
hysteresis
decreases the
probability of
unnecessary exit
from TTI bundling
caused by wireless
signal fluctuation.
This parameter
applies only to LTE
FDD networks.
control on service
data unit (SDU)
segmentation at the
radio link control
(RLC) layer in the
uplink for services
scheduled in
transmission time
interval (TTI)
bundling mode and
the maximum SDU
segments at the
RLC layer. If this
parameter is set to
0, the upper limit
control on SDU
segmentation at the
RLC layer is
LOFD-001048 /
disabled in the NO NO NO
TDLOFD-001048
uplink for services
scheduled in TTI
bundling mode. If
this parameter is
set to a non-zero
value X, upper limit
control on SDU
segmentation at the
RLC layer is
enabled and a
maximum of X SDU
segments that can
be divided for
services in uplink
dynamic scheduling
in TTI bundling
mode. This
parameter applies

Indicates the
maximum
transmission times
of hybrid automatic
repeat requests
LOFD-001048 /
(HARQs) based on NO NO NO
TDLOFD-001048
transmission time
interval (TTI) in the
uplink. For details,
see 3GPP TS
36.331.
Indicates the policy
of triggering
transmission time
interval (TTI)
bundling when
TtiBundlingSwitch
of the UlSchSwitch
parameter is on.
If this parameter is
set to
SERVICE_VOIP,
the eNodeB triggers
TTI bundling for
UEs running only
VoIP services in the
NO NO NO LOFD-001048
uplink.
If this parameter is
set to
SERVICE_MULTIA
PP, the eNodeB
triggers TTI
bundling for all UEs
running VoIP
services, including
UEs running only
VoIP services and
UEs running both
VoIP services and
data services in the
uplink.
FastReportDopSwit
ch: Indicates
whether to shorten
the period that the
baseband
processing unit
reports Doppler
measurements to
the MAC layer. If
this switch is on,
the Doppler
measurement
reporting period is NO NO NO None
shortened with the
predefined
reporting
conditions. If this
switch is off, the
Doppler
measurements are
reported at the
predefined periods
and with the
predefined
conditions.
pairing UEs to
increase the
transmission rate of
paired UEs. This
parameter applies
only to LTE TDD
cells.
Enhanced VMIMO
relies on the
existing VMIMO.
Enhanced VMIMO
can be enabled
only when the
UlVmimoSwitch
check box in the
Uplink schedule
switch parameter is
selected. The
TDLOFD-001058 /
detailed rules are
NO NO NO TDLOFD-081205 /
as follows:
TDSLBFD-0307
When the
UlVmimoSwitch
check box is
selected and this
parameter is set to
ON, enhanced
VMIMO is enabled.
When the
UlVmimoSwitch
check box is
selected and this
parameter is set to
OFF, VMIMO is
enabled.
When the
UlVmimoSwitch
check box is
deselected and this
Indicates the
threshold for the
number of
synchronized UEs
in a cell above
which the PDCCH
and PUSCH
resource allocation
optimization
mechanism is
activated in large
traffic volume
scenarios. If this LOFD-00101502 /
NO NO NO
parameter is set to TDLOFD-00101502
a value ranging
from 0 to 10000
(indicating a
threshold from 0 UE
to 10,000 UEs), the
mechanism is
activated when the
number of
synchronized UEs
in the cell is greater
than or equal to this
parameter value.
Indicates the traffic
volume threshold of
a UE above which
the UE is
determined as a UE
with large packets
in the PDCCH and
PUSCH resource
allocation
optimization
mechanism when
traffic is heavy. If
this parameter is
set to 0, none of the
UEs is determined LOFD-00101502 /
NO NO NO
as a UE with large TDLOFD-00101502
packets. If this
parameter is set to
a value ranging
from 1 to 1000000
(indicating a
threshold from 1 bit
to 1,000,000 bits), a
UE whose traffic to
be scheduled is
greater than or
equal to this
parameter value is
determined as a UE
with large packets.
RLC initial
transmission is
performed on a
single service and
the MAC layer
sends buffer status
reports (BSRs) or
power headroom
reports (PHRs). The
parameter value
64bit indicates that
the head overhead
is 64 bits. This
parameter can be
set to 64bit in
scenarios where
RLC initial
transmission is
performed on a LOFD-00101502 /
NO NO NO
single service and TDLOFD-00101502
the MAC layer
sends BSRs and
PHRs. The
parameter value
80bit indicates that
the head overhead
is 80 bits. This
parameter can be
set to 80bit in
scenarios where
RLC retransmission
is performed on a
single service and
the MAC layer
sends BSRs and
PHRs. The
parameter value
96bit indicates that

Indicates the
minimum interval
between two
preallocations for a
UE with sparse
packets. This is, the
LOFD-00101502 /
interval between NO NO NO
TDLOFD-00101502
two times that a UE
with sparse packets
is preallocated
cannot be less than
this parameter
value.
Indicates the data
amount
LOFD-00101502 /
preallocated to NO NO NO
TDLOFD-00101502
each UE with
sparse packets.

The parameter
value
THREE_MODE_BA
SED_ON_PCI
indicates that the
following three
interference
randomization
modes are
supported when the
uplink RB usage is
less than or equal
to 60%: (1).
Resources are
allocated from high
frequency bands to
low frequency
bands in cells with
the value 0 after the LOFD-00101502
NO NO NO
PCI-modulo-3 TDLOFD-00101502
operation; (2).
Resources are
allocated from low
frequency bands to
high frequency
bands in cells with
the value 1 after the
PCI-modulo-3
operation; (3).
Resources are
allocated from the
central frequency
bands to high
frequency bands in
cells with the value
2 after the PCI-
modulo-3 operation.
If the uplink RB
Indicates the target
IBLER in the SINR
calibration algorithm
used for dynamic
scheduling of voice
users in non-TTI- LBFD-001006 /
bundling mode. A NO NO NO TDLBFD-001006
larger value of this LBFD-081105
parameter results in
a larger SINR
adjustment and a
higher MCS to be
selected.
Indicates the period
during which the
uplink load of an
SFN cell is
measured. The
isolation threshold
is adjusted based
on the cell load in a
measurement
period. High load
leads to low
isolation threshold,
and UEs are likely
to enter
independent
scheduling mode.
Low load leads to NO NO NO TDLOFD-002008
high isolation
threshold, and UEs
are likely to enter
joint scheduling
mode.
This parameter is
valid only when the
SfnUlSchSwitch
parameter in the
CellAlgoSwitch MO
is set to
ADAPTIVE(Adaptiv
e scheduling). This
parameter applies
only to LTE TDD
cells.

Indicates the
maximum number
of layers of UEs
that can be paired
for high-order NO NO NO TDLOFD-090211
VMIMO. This
parameter applies
only to LTE TDD
cells.
Indicates the
minimum interval of
triggering uplink
compensate
scheduling for
VoLTE UEs in talk
spurts when
UlVoipSchOptSwitc
h is selected.
If this parameter is
set to
INTERVAL_ADAPT
IVE(INTERVAL_AD
APTIVE), the
minimum interval of
LOFD-00101502 /
triggering uplink NO NO NO
TDLOFD-00101502
compensate
scheduling for
VoLTE UEs in talk
spurts is adaptively
adjusted based on
the SR period.
If this parameter is
set to any other
value, the minimum
interval of triggering
uplink compensate
scheduling for
VoLTE UEs in talk
spurts equals to the
GUI value.
Indicates the
minimum interval of
triggering uplink
compensate
scheduling for LOFD-00101502 /
NO NO NO
VoLTE UEs in TDLOFD-00101502
silence periods
when
UlVoipSchOptSwitc
h is selected.
UlIblerAdjustSwitch
option of the
UlSchSwitch
parameter is
selected, SINR-
fluctuation-based
target IBLER
adaptation is
enabled only when
the
SinrFlunIBlerAdapt
Switch option of the
UlIBlerTargetAdaptT
ype parameter is
selected.
SinrJumpIBlerAdapt
Switch: Indicates
SINR-jump-based
target IBLER
NO NO NO LBFD-001006
adaptation. If the
UlIblerAdjustSwitch
option is selected,
SINR-jump-based
target IBLER
adaptation is
enabled only when
this
SinrJumpIBlerAdapt
Switch option is
selected.
When the
UlIblerAdjustSwitch
option of the
UlSchSwitch
parameter is
deselected, the two
options of the
UlIBlerTargetAdaptT
CsiWiUlService(Csi
WiUlService) and
UEs have only
downlink aperiodic
CSI to transmit and
do not have uplink
service data to
transmit, within a
specified period of
time after the
aperiodic CSI is
triggered, these
UEs cannot be
immediately
scheduled on the
PUSCH nor only
downlink aperiodic
CSIs are
transmitted on the
NO NO NO LBFD-060103
PUSCH, but the
downlink aperiodic
CSIs and uplink
service data of
these UEs can be
simultaneously
transmitted on the
PUSCH.
Meanwhile, this
parameter also
controls the CQI
update policy when
the eNodeB
receives CQI of 0
from UEs. If this
parameter is set to
CsiOnly(CsiOnly),
the eNodeB
determines that the
Indicates the start
position of the
reserved RB for
UEs running voice
services in the
uplink in large-traffic
scenarios. This
parameter takes LOFD-00101502 /
NO NO NO
effect only when the TDLOFD-00101502
UlVoipRbRsvSwitch
option of the
UlSchExtSwitch
parameter is
selected. This
option applies only
to LTE FDD.
Indicates the
number of RBs
reserved for UEs
running voice
LOFD-00101502 /
services in the NO NO NO
TDLOFD-00101502
uplink in large-traffic
scenarios. This
option applies only
to LTE FDD.
Indicates whether
large-packet service
identification is
required in IBLER
adaptation. If this
parameter is set to
ON(On), large-
packet service
identification is NO NO NO LBFD-001006
required in IBLER
adaptation. If this
parameter is set to
OFF(Off), large-
packet service
identification is not
required in IBLER
adaptation.

Indicates the
options used to
enable or disable
VMIMO
optimization in the
uplink.
VmimoOptResSwitc TDLOFD-001058
h: Indicates NO NO NO TDLOFD-081205
whether to enable TDSLBFD-0307
uplink VMIMO
resource
optimization. This
option applies only
to LTE TDD
networks.
This parameter is
used to configure
the interference
threshold for UL
coordinated AMC.
UL coordinated
AMC takes effect
only when the NO NO NO LOFD-081206
average uplink
interference is
greater than this
parameter value.
This parameter
applies only to LTE
FDD.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO MRFD-101402
cell within an
eNodeB.
resource-
insufficiency-
induced RRC
connection rejection
rate, which is used
to determine
whether to start
UMTS and LTE
unified overload
control. UMTS and
LTE unified
overload control
starts when both of
the following
conditions are met:
(1) The resource-
insufficiency-
induced RRC
connection rejection
NO NO NO MRFD-101402
rate is greater than
the
RrcRejectRateHigh
Thd parameter
value; (2) The
number of RRC
connection setup
requests is greater
than the
RrcReqNumHighTh
d parameter value.
The actual
threshold equals
the percentage
value of this
parameter divided
by 10. For example,
the GUI value 10
indicates that the
induced RRC
connection rejection
rate, which is used
to determine
whether to stop
UMTS and LTE
unified overload
control. UMTS and
LTE unified
overload control
stops if all of the
following conditions
are met: (1) The
number of
RRC_CONNECTE
D UEs is less than
the UeNumLowThd
parameter value;
(2) The resource- NO NO NO MRFD-101402
insufficiency-
induced RRC
connection rejection
rate is less than the
RrcRejectRateLowT
hd parameter value;
(3) The number of
RRC connection
setup requests is
less than the
RrcReqNumLowTh
d parameter value.
The actual
threshold equals
the percentage
value of this
parameter divided
by 10. For example,
Indicates the
threshold of the
number of RRC
connection setup
requests, which is
used to determine
whether to start
UMTS and LTE
unified overload
control. UMTS and
LTE unified
overload control
starts when both of
the following
conditions are met:
NO NO NO MRFD-101402
(1) The number of
RRC connection
setup requests is
greater than the
RrcReqNumHighTh
d parameter value;
(2)The resource-
insufficiency-
induced RRC
connection rejection
rate is greater than
the
RrcRejectRateHigh
Thd parameter
value.
Indicates the
threshold of the
RRC connection
setup request
number, which is
used to determine
whether to stop
UMTS and LTE
unified overload
control. UMTS and
LTE unified
overload control
stops if all of the
following conditions
are met: (1) The
number of
RRC_CONNECTE NO NO NO MRFD-101402
D UEs is less than
the UeNumLowThd
parameter value;
(2) The resource-
insufficiency-
induced RRC
connection rejection
rate is less than the
RrcRejectRateLowT
hd parameter value;
(3) The number of
RRC connection
setup requests is
less than the
RrcReqNumLowTh
d parameter value.
Indicates the
RRC_CONNECTE
D UE number
threshold used to
determine whether
to start UMTS and
LTE unified
overload control.
NO NO NO MRFD-101402
UMTS and LTE
unified overload
control starts when
the number of
RRC_CONNECTE
D UEs is greater
than this parameter
value.
Indicates the
threshold of the
RRC_CONNECTE
D UE number,
which is used to
determine whether
to stop UMTS and
LTE unified
overload control.
UMTS and LTE
unified overload
control stops if all of
the following
conditions are met:
(1) The number of
RRC_CONNECTE
NO NO NO MRFD-101402
D UEs is less than
the UeNumLowThd
parameter value;
(2) The resource-
insufficiency-
induced RRC
connection rejection
rate is less than the
RrcRejectRateLowT
hd parameter value;
(3) The number of
RRC connection
setup requests is
less than the
RrcReqNumLowTh
d parameter value.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the 32-bit
reserved parameter
3 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 8 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 9 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 10 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 11 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 13 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 22 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 23 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 24 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 25 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 26 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 27 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 28 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 29 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 30 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 31 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 32 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 33 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 34 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 35 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 36 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 37 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 38 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 39 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 40 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 41 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 42 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 43 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 44 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 45 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 46 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 47 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 48 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 49 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 50 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 51 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 52 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 53 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 54 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 55 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 56 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 57 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 58 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 59 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 60 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 61 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 62 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 63 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 64 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 65 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 66 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 67 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 68 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 69 that is
reserved for future
requirements. Note
on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U32

reserved parameter
1 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U32
reserved parameter
2 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U32

reserved parameter
3 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U32
reserved parameter
4 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U32

reserved parameter
5 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U32
reserved parameter
6 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U32

reserved parameter
7 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U32
reserved parameter
8 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U16

reserved parameter
1 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U16
reserved parameter
2 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U16

reserved parameter
3 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U16
reserved parameter
4 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U16

reserved parameter
5 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U16
reserved parameter
6 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U16

reserved parameter
7 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U16
reserved parameter
8 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U16

reserved parameter
9 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U16
reserved parameter
10 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U16

reserved parameter
11 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U16
reserved parameter
12 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U16

reserved parameter
13 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U16
reserved parameter
14 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U16

reserved parameter
15 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U16
reserved parameter
16 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
1 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
2 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
3 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
4 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
5 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
6 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
7 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
8 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
9 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
10 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
11 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
12 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
13 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
14 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
15 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
16 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
17 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
18 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
19 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
20 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
21 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
22 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
23 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
24 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
25 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
26 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
27 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
28 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
29 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
30 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the U8
reserved parameter
31 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the U8
reserved parameter
32 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the switch

used to enable or LOFD-001074
NO NO NO
disable inter-RAT MRFD-231901
joint shutdown.

Indicates the start

time of inter-RAT
cell shutdown. If the
switch for inter-RAT
cell shutdown is
turned on, inter-
LOFD-001074
RAT cell shutdown NO NO NO
MRFD-231901
can be performed
during the period
specified by the
start time and stop
time of inter-RAT
cell shutdown.
Indicates the stop
time of inter-RAT
cell shutdown. If the
stop time is earlier
than or the same as
the start time, the
stop time is
assumed to be the
time of the next day.
If the switch for LOFD-001074
NO NO NO
inter-RAT cell MRFD-231901
shutdown is turned
on, inter-RAT cell
shutdown can be
performed during
the period specified
by the start time
and stop time of
inter-RAT cell
shutdown.
switch is enabled,
the ShutDownType
parameter is set to
BY_UTRAN_WITH
OUT_LOAD, the
shutdown
conditions including
the specified inter-
RAT cell shutdown
duration and uplink
and downlink
resource block (RB)
usages in the E-
UTRAN cell are
met, and the
number of UEs
served by the E-
UTRAN cell is less
than or equal to this NO NO NO LOFD-001074
parameter value.
(2) The inter-RAT
cell shutdown
switch is enabled,
the ShutDownType
parameter is set to
BY_UTRAN_WITH
_LOAD or
BY_UTRAN_AND_
GERAN_WITH_LO
AD, the shutdown
conditions including
the specified inter-
RAT cell shutdown
duration, uplink and
downlink RB
usages in the E-
UTRAN cell,
the specified inter-
RAT cell shutdown
duration and the
number of UEs
served by the E-
UTRAN cell are
met, and uplink and
downlink resource
block (RB) usages
in the E-UTRAN cell
are less than or
equal to the
UlPrbThd and
DlPrbThd
parameter values,
respectively.
(2) The inter-RAT
cell shutdown
switch is enabled, NO NO NO LOFD-001074
the ShutDownType
parameter is set to
BY_UTRAN_WITH
_LOAD or
BY_UTRAN_AND_
GERAN_WITH_LO
AD, the shutdown
conditions including
the specified inter-
RAT cell shutdown
duration, the
number of UEs
served by the E-
UTRAN cell,
allocation/retention
priorities (ARPs) of
services in the E-
UTRAN cell, and
BY_UTRAN_WITH
OUT_LOAD, the
shutdown
conditions including
the specified inter-
RAT cell shutdown
duration and the
number of UEs
served by the E-
UTRAN cell are
met, and uplink and
downlink resource
block (RB) usages
in the E-UTRAN cell
are less than or
equal to the
UlPrbThd and
DlPrbThd
parameter values,
NO NO NO LOFD-001074
respectively.
(2) The inter-RAT
cell shutdown
switch is enabled,
the ShutDownType
parameter is set to
BY_UTRAN_WITH
_LOAD or
BY_UTRAN_AND_
GERAN_WITH_LO
AD, the shutdown
conditions including
the specified inter-
RAT cell shutdown
duration, the
number of UEs
served by the E-
UTRAN cell,
allocation/retention
load status of the E-
UTRAN cell.
If this parameter is
set to
BY_UTRAN_WITH
_LOAD, the
eNodeB obtains the
load status of the
co-coverage
neighboring UTRAN
cell, and shuts
down the carrier of
the E-UTRAN cell
based on the load
status of both the
E-UTRAN cell and
the neighboring
UTRAN cell.
LOFD-001074
If this parameter is NO NO NO
MRFD-231901
set to
BY_GERAN_WITH
_LOAD, the
eNodeB obtains the
load status of the
co-coverage
neighboring
GERAN cell, and
shuts down the
carrier of the E-
UTRAN cell based
on the load status
of both the E-
UTRAN cell and the
neighboring
GERAN cell.
If this parameter is
set to

Indicates the
allocation/retention
priority (ARP)
threshold for high-
priority services. If
the ShutDownType
parameter is set to
BY_UTRAN_WITH
_LOAD or
BY_UTRAN_AND_
NO NO NO MRFD-231901
GERAN_WITH_LO
AD, the eNodeB
does not shut down
the carrier of the E-
UTRAN cell when
the cell has a
service whose ARP
is lower than or
equal to this
parameter value.
shutdown, the
eNodeB hands over
or redirects UEs in
the E-UTRAN cell
to a co-coverage
neighboring UTRAN
cell when related
conditions are met:
The inter-RAT cell
shutdown switch is
enabled, the
ShutDownType
parameter is set to
BY_UTRAN_WITH
_LOAD or
BY_UTRAN_AND_
GERAN_WITH_LO
AD, the shutdown
conditions including
NO NO NO MRFD-231901
the specified inter-
RAT cell shutdown
duration, the
number of UEs
served by the E-
UTRAN cell, uplink
and downlink RB
usages in the E-
UTRAN cell,
allocation/retention
priorities (ARPs) of
services in the E-
UTRAN cell are
met, and uplink and
downlink load of the
neighboring UTRAN
cell are less than
values of
UtranCellUlLoadTh
Indicates the
downlink load offset
of a co-coverage
neighboring UTRAN
cell for enabling the
carrier of the E-
UTRAN cell that
has been shut
down.
A shutdown E-
UTRAN cell is
enabled when the
following conditions
are met: (1) The
ShutDownType NO NO NO MRFD-231901
parameter is set to
BY_UTRAN_WITH
_LOAD or
BY_UTRAN_AND_
GERAN_WITH_LO
AD. (2) The load of
a co-coverage
neighboring UTRAN
cell is larger than or
equal to the sum of
this parameter
value and the
UtranCellDlLoadTh
d parameter value.
eNodeB hands over
or redirects UEs in
the E-UTRAN cell
to a co-coverage
neighboring UTRAN
cell when related
conditions are met:
The inter-RAT cell
shutdown switch is
enabled, the
ShutDownType
parameter is set to
BY_UTRAN_WITH
_LOAD or
BY_UTRAN_AND_
GERAN_WITH_LO
AD, the shutdown
conditions including
the specified inter- NO NO NO MRFD-231901
RAT cell shutdown
duration, the
number of UEs
served by the E-
UTRAN cell, uplink
and downlink RB
usages in the E-
UTRAN cell,
allocation/retention
priorities (ARPs) of
services in the E-
UTRAN cell are
met, and uplink and
downlink load of the
neighboring UTRAN
cell are less than
values of
UtranCellUlLoadTh
Indicates the uplink
load offset of a co-
coverage
neighboring UTRAN
cell for enabling the
carrier of the E-
UTRAN cell that
has been shut
down.
A shutdown E-
UTRAN cell is
enabled when the
following conditions
are met: (1) The
ShutDownType NO NO NO MRFD-231901
parameter is set to
BY_UTRAN_WITH
_LOAD or
BY_UTRAN_AND_
GERAN_WITH_LO
AD. (2) The load of
a co-coverage
neighboring UTRAN
cell is larger than or
equal to the sum of
this parameter
value and the
UtranCellUlLoadTh
d parameter value.
Indicates the load
threshold of a co-
coverage
neighboring
GERAN cell for the
E-UTRAN cell to
enter inter-RAT co-
coverage cell
shutdown mode.
In inter-RAT cell
shutdown, the
eNodeB shuts
down the carrier of
the E-UTRAN cell
when related
conditions are met:
The inter-RAT cell
shutdown switch is
enabled, the
NO NO NO MRFD-231901
ShutDownType
parameter is set to
BY_GERAN_WITH
_LOAD or
BY_UTRAN_AND_
GERAN_WITH_LO
AD, the shutdown
conditions including
the specified inter-
RAT cell shutdown
duration and no UE
served by the E-
UTRAN cell are
met, and the load of
a co-coverage
neighboring
GERAN cell is less
than this parameter
value.
Indicates the load
offset of a co-
coverage
neighboring
GERAN cell for
enabling the carrier
of the E-UTRAN
cell that has been
shut down.
A shutdown E-
UTRAN cell is
enabled when the
following conditions
are met: (1) The
ShutDownType
NO NO NO MRFD-231901
parameter is set to
BY_GERAN_WITH
_LOAD or
BY_UTRAN_AND_
GERAN_WITH_LO
AD. (2) The load of
a co-coverage
neighboring
GERAN cell is
larger than or equal
to the sum of this
parameter value
and the
GeranCellLoadThd
parameter value.

Indicates the local

ID of a cell, which LOFD-070208
uniquely identifies LOFD-110203
the cell within an YES YES NO LOFD-001066
eNodeB. This LOFD-070222
option applies only LOFD-070223
to LTE FDD.
Indicates whether
the local cell
supports SRS
automatic
neighboring cell
measurement. If
this parameter is
set to ON(On),
LOFD-070208
settings of options
LOFD-110203
of
NO NO NO LOFD-001066
UlHetnetCompOnUl
LOFD-070222
RsrpSw and
LOFD-070223
UlHetnetCompMan
ualNcellCfgSw of
the
UplinkCompSwitch
parameter do not
take effect. This
parameter applies
only to LTE FDD.

Indicates the offset

for SRS automatic
neighboring cell
measurement event
A3. This offset is
the difference
between the signal
quality of a
neighboring cell
and that of the LOFD-070208
serving cell. A larger LOFD-110203
value indicates a NO NO NO LOFD-001066
higher requirement LOFD-070222
on neighboring cell LOFD-070223
quality for reporting
event A3
measurement
reports related to
SRS automatic
neighboring cell
measurement. This
option applies only
to LTE FDD.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates whether
TX channel
calibration is
LOFD-001003
enabled in a cell NO NO NO
LOFD-001060
with combined
RRUs and four TX
antennas.

Indicates the local

time to perform
periodic TX channel
calibration in a cell
with combined
RRUs and four TX
antennas. This
parameter works
together with the
LOFD-001003
TxChnCalPeriod NO NO NO
LOFD-001060
parameter to
determine the time
to perform periodic
TX channel
calibration. For
details, see
descriptions of the
TxChnCalPeriod
parameter.
determine the time
to perform periodic
TX channel
calibration. The
following examples
clarify the criteria:
(1) If the
TxChnCalTime
parameter is set to
03:00:00 and the
TxChnCalPeriod
parameter is set to
48 (indicating that
the TX channel
calibration period is
24 hours), periodic
TX channel
calibration is
performed at LOFD-001003
NO NO NO
03:00:00 every day. LOFD-001060
(2) If the
TxChnCalTime
parameter is set to
03:00:00 and the
TxChnCalPeriod
parameter is set to
24 (indicating that
the TX channel
calibration period is
12 hours), periodic
TX channel
calibration is
performed at
03:00:00 and
15:00:00 every day.
(3) If the
TxChnCalTime
parameter is set to

Indicates the
horizontal distance
between two
combined physical
antennas. The LOFD-001003
NO NO NO
horizontal distance LOFD-001060
is used for TX
channel calibration
in a cell with
combined RRUs.
Indicates the local
identity of the cell. It
uniquely identifies a
cell within an YES YES NO LOFD-081221
eNodeB. This
parameter applies
only to FDD cells.

Indicates the SFN

cell ID in a super
combined cell. This
parameter value
must be set based NO YES NO LOFD-081221
on global network
planning. This
parameter applies
only to FDD cells.

Indicates the local

ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the start

location of resource
blocks (RBs) in UL
Refarming Zero NO NO NO MRFD-101221
Bufferzone. This
parameter applies
only to LTE FDD.

Indicates the end

location of resource
blocks (RBs) in UL
Refarming Zero NO NO NO MRFD-101221
Bufferzone. This
parameter applies
only to LTE FDD.

Indicates the uplink

physical resource
block (PRB)
threshold in UL
NO NO NO MRFD-101221
Refarming Zero
Bufferzone. This
parameter applies
only to LTE FDD.
Indicates the uplink
physical resource
block (PRB) offset
in UL Refarming
NO NO NO MRFD-101221
Zero Bufferzone.
This parameter
applies only to LTE
FDD.
Indicates the
reference signal
received power
(RSRP) threshold
used for UE
location NO NO NO MRFD-101221
determination in UL
Refarming Zero
Bufferzone. This
parameter applies
only to LTE FDD.

Indicates the
reference signal
received power
(RSRP) offset used
for UE location
NO NO NO MRFD-101221
determination in UL
Refarming Zero
Bufferzone. This
parameter applies
only to LTE FDD.

Indicates the
threshold for
stopping inter-RAT
event B1
measurements in NO NO NO MRFD-101221
UL Refarming Zero
Bufferzone. This
parameter applies
only to LTE FDD.

Indicates the
received signal
code power (RSCP)
reporting threshold
in UL Refarming NO NO NO MRFD-101221
Zero Bufferzone.
This parameter
applies only to LTE
FDD.
Indicates the period
of inter-RAT event
B1 measurements
in UL Refarming
NO NO NO MRFD-101221
Zero Bufferzone.
This parameter
applies only to LTE
FDD.
Indicates the local
ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the
interval that an
eNodeB adjusts
Sounding
NO NO NO None
resources, this
parameter applies
only to LTE TDD
cells.

interference is
severe. If the
UpPTS interference
is greater than or
equal to the value
of this parameter,
the eNodeB
determines the
interference is
severe. Low
interference and
medium
interference can be
determined based
on the values of this
parameter and the
Test Hysteresis
parameter. If the
UpPTS interference
NO NO NO None
is smaller than the
difference between
the value of Test
Threshold and Test
Hysteresis, the
eNodeB determines
the interference is
low. If the UpPTS
interference is
greater than or
equal to the
difference between
the value of Test
Threshold and Test
Hysteresis and
smaller than the
value of Test
Threshold, the
eNodeB determines
determine the
UpPTS
interference. This
parameter can be
used to reduce the
ping-pong effect
due to interference
fluctuation. Low
interference and
medium
interference can be
determined based
on the values of this
parameter and the
Test Threshold
parameter. If the
UpPTS interference
is smaller than the
difference between
NO NO NO None
the value of Test
Threshold and Test
Hysteresis, the
eNodeB determines
the interference is
low. If the UpPTS
interference is
greater than or
equal to the
difference between
the value of Test
Threshold and Test
Hysteresis and
smaller than the
value of Test
Threshold, the
eNodeB determines
the interference is
medium, this
Indicates the local
ID of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the
downlink user
throughput
threshold 0. If the
downlink user
throughput falls into
the interval [0, NO NO NO None
Downlink User
Throughput
Threshold 0), the
data rate is
considered in the
interval of Index0.
Indicates the
downlink user
throughput
threshold 1. If the
downlink user
throughput falls into
the interval
[Downlink User
NO NO NO None
Throughput
Threshold 0,
Downlink User
Throughput
Threshold 1), the
data rate is
considered in the
interval of Index1.

Indicates the
downlink user
throughput
threshold 2. If the
downlink user
throughput falls into
the interval
[Downlink User
NO NO NO None
Throughput
Threshold 1,
Downlink User
Throughput
Threshold 2), the
data rate is
considered in the
interval of Index2.

Indicates the
downlink user
throughput
threshold 3. If the
downlink user
throughput falls into
the interval
[Downlink User
NO NO NO None
Throughput
Threshold 2,
Downlink User
Throughput
Threshold 3), the
data rate is
considered in the
interval of Index3.
Indicates the
downlink user
throughput
threshold 4. If the
downlink user
throughput falls into
the interval
[Downlink User
NO NO NO None
Throughput
Threshold 3,
Downlink User
Throughput
Threshold 4), the
data rate is
considered in the
interval of Index4.
Indicates the
access delay
threshold of uplink
services initiated by
UEs in idle mode, NO NO NO None
which is used to
determine whether
the access delay is
good.
Indicates the
access delay
threshold of uplink
services initiated by
UEs in idle mode, NO NO NO None
which is used to
determine whether
the access delay is
poor.
Indicates the
access delay
threshold of
downlink services
initiated by UEs in NO NO NO None
idle mode, which is
used to determine
whether the access
delay is good.
Indicates the
access delay
threshold of
downlink services
initiated by UEs in NO NO NO None
idle mode, which is
used to determine
whether the access
delay is poor.

Indicates the local

ID of a cell, which
uniquely identifies YES YES NO None
the cell within an
eNodeB.
Indicates whether
to enable wireless
TCP proxy. If the
operator's network
is an LTE-only
network and data
forwarding
channels have
been configured for
inter-eNodeB
handovers, it is
recommended that
this option be
selected. After this NO NO NO None
function is enabled,
the eNodeB
processes TCP
stream packets of
HTTP services to
increase the
download rate of
TCP streams. If this
option is
deselected, this
function is disabled.
This option applies
only to LTE FDD.

Indicates whether
to enable TCP
measurements. If
this parameter is
set to ON(ON), the
eNodeB starts TCP
measurements NO NO NO None
regardless of the
status of the
wireless TCP proxy
function. This
parameter applies
only to LTE FDD.
Indicates the
threshold for
measuring the
maximum round trip
time (RTT) among
all TCP-related
counters. If the RTT
of TCP packets in
the access network
or ground links is NO NO NO None
greater than this
parameter value,
the RTT is not
considered during
the measurement of
counters related to
RTT delay. This
option applies only
to LTE FDD.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
UEInformationRequ
est message to the
UE complying with
3GPP Release 9
and later and
requires the UE
reporting random
access information.
The eNodeB uses
the reported
random access
information for
RACH resource
adjustment. If this
switch is off, the
query of UE
random access
information is
disabled. The LOFD-002015 /
NO NO NO
eNodeB uses the TDLOFD-002015
self-collected
random access
information for
RACH resource
adjustment.
PRACHFalseAlarm
DetSwitch:
Indicates whether
to enable PRACH
false alarm
detection. If this
switch is on and the
PrachFalseAlarmDe
tRadThd or
RachThdBoostRati
o parameter is not
set to off, PRACH
false alarm
Indicates the switch
used to enable or
disable change in
the cell-specific
SRS subframe
configuration (that
is, the adjustment
on the setting of the
SrsSubframeCfg
parameter).
If the switch is on,
LBFD-002003 /
the algorithm NO NO NO
TDLBFD-002003
dynamically adjusts
the SRS subframe
configuration based
on the usage of cell
resources.
If the switch is off,
the algorithm uses
the initial
configuration and
does not perform
dynamic switching.
LBBPc is used or
the cell bandwidth
is 1.4 or 3 MHz.
When PUCCH
flexible
configuration is
enabled, frequency-
domain uplink ICIC
and uplink
frequency hopping
scheduling cannot
be used. If this
option is selected,
an equal number of
RBs (specified by
the
PucchExtendedRB
Num parameter)
are separately LBFD-002003 /
NO NO NO
added to both ends TDLBFD-002003
of the uplink band
allocated for the
PUCCH. The total
number of
extension PUCCH
RBs equals to the
PucchExtendedRB
Num parameter
value multiplied by
two. If this option is
deselected, this
function does not
take effect. This
option applies only
to LTE FDD.
Dl2CCAckResShar
eSw: Indicates
whether
Indicatestothe
enable
switch
that is used to
enable and disable
the Active Queue
Management
(AQM) algorithm. If
this switch is set to
ON, the AQM
function is enabled
to prevent or control
congestion. The
length of the PDCP LOFD-001027 /
NO NO NO
packet queue is TDLOFD-001027
maintained at a
relatively small
value to help
achieve an
appropriate trade-
off between
throughput and time
latency. If this
switch is set to OFF,
the AQM function is
disabled.
NACK).
DlEnVarIblerTarget
Switch: Indicates
whether to enable
enhanced downlink
target IBLER
adaption. If this
option is selected,
the downlink target
IBLER is adaptively
adjusted based on
CQI fluctuation and
TB size. If this
option is
deselected, the
downlink target
IBLER policy is
controlled by LOFD-00101501 /
DlVarIBLERtargetS TDLOFD-00101501
NO NO NO
witch. LOFD-00101502 /
DlEnVarIblerTarget TDLOFD-00101502
Switch applies only
to LTE FDD.
DlRetxTbsIndexAdj
OptSwitch:
Indicates whether
to enable transport
block size (TBS)
index adjustment
optimization in
retransmissions. If
this option is
selected, TBS index
adjustment
optimization in
retransmissions is
enabled. The TBS
index is lowered for
Indicates the switch
used to enable or
disable dynamic
power adjustment.
If this switch is on,
the power amplifier
(PA) working
voltage is adjusted
based on the load
of the eNodeB,
which reduces NO NO NO LOFD-001025
power consumption
of the PA and
improves energy
efficiency of the
eNodeB. Dynamic
power adjustment
applies only to FDD
cells with a
bandwidth no less
than 5 MHz.
Among services
with different QCIs,
those with a QCI of
1 use the QoS
satisfaction
assessment
method that is
dedicated to VoLTE
services. If a
service with the QCI
of 1 is not a VoLTE
service, the
satisfaction rate
calculated using
this method is lower
than the actual
LBFD-002023 /
value, which affects
TDLBFD-002023
the cell load control.
LBFD-002024 /
Therefore, if not all
NO NO NO TDLBFD-002024
the services with
LOFD-00102901
the QCI of 1 are
LOFD-081218 /
VoLTE services, it is
TDLOFD-110230
recommended that
this option be
deselected.
UlLdcSwitch:
Indicates whether
to implement load
control in the uplink
of a cell. If this
option is selected,
the eNodeB checks
for congestion in
the uplink of the
cell. If the uplink is
congested, load
control is
performed. If this
Indicates whether
to enable MLB to
UTRAN.
GeranMlbSwitch:
Indicates whether
to enable MLB to
GERAN.
UtranIdleMlbSwitch:
Indicates whether
to enable "MLB to
UTRAN by
transferring
RRC_REL UEs."
MlbLoadInfoSwitch:
Indicates whether
the load of an inter- LOFD-001032 /
RAT cell is TDLOFD-001032
considered when LOFD-001044 /
MLB is performed NO NO NO TDLOFD-001044
between an E- LOFD-001045 /
UTRAN cell and an TDLOFD-001045
inter-RAT cell. This LOFD-001057
inter-RAT cell must
be a UTRAN cell in
the current version.
If both the
MlbLoadInfoSwitch
and UtranMlbSwitch
options are
selected, a UTRAN
cell whose load
status has been
obtained and is
normal or medium
can be a candidate
cell for MLB to
UTRAN. If both the
dynamically.
EDlMaxTXPwrSwitc
h: Indicates the
switch for enhanced
maximum TX power
of the cell. If this
switch is off, the
maximum TX power
of the cell is
determined by the
reference signal
(RS) power and the
scaling factor
indexes Pa and Pb.
If this switch is on,
LBFD-002003 /
the maximum TX
TDLBFD-002003
power of the cell
LBFD-002009 /
can be increased to
TDLBFD-002009
improve the RB NO NO NO
LBFD-002016 /
usage in the cell.
TDLBFD-002016
This switch has no
TDLOFD-001049
impact on the TDD
TDLOFD-001061
20M, TDD 15HMz
and 10M cell.
BFModeUserPwrS
witch: Specifies
whether to turn on
the UE power
optimization switch
in BF mode. If the
BFModeUserPwrS
witch check box is
cleared, BF UEs
adopt the existing
power allocation
principle. If the
BFModeUserPwrS
detected. If this
option is selected,
the eNodeB
processes the
measured uplink
SINR even when
PUCCH DTX is
detected, generates
power control
commands based
on the SINR, and
delivers the power
control commands
to UEs.
PuschIoTCtrlSwitch
: Indicates whether
LBFD-002009 /
to enable
TDLBFD-002009
interference control
LBFD-002026 /
in closed-loop NO NO NO
TDLBFD-002026
power control for
LBFD-081101 /
the PUSCH in
TDLBFD-081104
dynamic scheduling
mode. Interference
control in closed-
loop power control
for the PUSCH in
dynamic scheduling
mode is enabled
only when this
option is selected.
SrsPcSwitch:
Indicates whether
to enable SRS
power control
adjustment. SRS
power control
adjustment is
Indicates the switch
that is used to
enable or disable
the beamforming
algorithm. If the
switch is on, UEs in
the cell can be
served by the
beamforming
algorithm. If the
TDLOFD-001049
switch is off, UEs in NO NO NO
TDLOFD-001061
the cell cannot be
served by the
beamforming
algorithm. The
beamforming
algorithm is
disabled by default.
It must be enabled
manually if
required.
reporting is
triggered by invalid
CQI reports in eight
consecutive CQI
reporting periods. If
CRC on aperiodic
CQI reports fails,
aperiodic CQI
reporting is
triggered after eight
LOFD-110205
TTIs regardless of
LOFD-001016 /
the DRX status.
TDLOFD-001016
VoipTbsBasedMcsS
LOFD-00101502 /
elSwitch: Indicates
TDLOFD-00101502
whether the
LOFD-001109 /
modulation and
TDLOFD-001109
coding scheme
LOFD-001070 /
(MCS) index is
TDLOFD-001070
selected based on NO NO NO
TDLOFD-070224
the transport block
LBFD-002025 /
size (TBS) in
TDLBFD-002025
downlink
LBFD-002031 /
scheduling for VoIP
TDLBFD-002031
services. If this
LBFD-070102 /
option is selected,
TDLBFD-070102
the MCS index is
LOFD-081218 /
selected based on
TDLOFD-081215
the TBS in downlink
scheduling for VoIP
services. If this
option is
deselected, the
MCS index is not
selected based on
the TBS in downlink
scheduling for VoIP
services.
scheduler performs
scheduling without
considering power
control restrictions.
If this option is
selected, the uplink
scheduler performs
scheduling without
considering power
control restrictions,
which ensures full
utilization of the
transmit power for
LOFD-001016 /
all UEs. If this
TDLOFD-001016
option is
LOFD-001048 /
deselected, the
TDLOFD-001048
uplink scheduler
LOFD-00101502 /
considers power
TDLOFD-00101502
control restrictions NO NO NO
TDLBFD-002025
while performing
LBFD-070102 /
scheduling, which
TDLBFD-070102
prevents full
LOFD-001002
utilization of the
LOFD-001058
transmit power for
LBFD-001006
UEs at far or
medium distances
from the cell center.
UlMinGbrSwitch:
Indicates whether
to enable uplink
minimum
guaranteed bit rate
(GBR). If this option
is selected, the
minimum GBR of
non-GBR services
is ensured by
Indicates whether
to enable or disable
RAN sharing for
admission and
scheduling. If this LOFD-001036 /
switch is turned on, TDLOFD-001036
NO NO NO
operators share TDLOFD-001112
data channel LOFD-070206
resources
according to the
specified
percentages.
performed in a blind
manner. If this
option is off,
frequency-priority-
based inter-
frequency
handovers are
performed based
on measurements.
This option takes
effect only when the
FreqPriorIFHOSwitc
h option is on.
MlbBasedFreqPriH
oSwitch: Indicates
whether to enable
frequency-priority-
based inter-
frequency NO NO NO None
handovers when
load balancing is
triggered. If this
option is on, the
eNodeB stops
performing
frequency-priority-
based inter-
frequency
handovers on UEs
that newly access
the cell with load
balancing enabled.
If this option is off,
the eNodeB
continues to
perform frequency-
priority-based inter-
user pairing is
disabled.
TM9MuBfSwitch: If
the TM9MuBfSwitch
and MuBfSwitch
options under the
MuBfAlgoSwitch
parameter and the
TM9Switch option
under the
EnhMIMOSwitch
parameter are
selected, downlink
TM9 multi-user
pairing in closed-
loop mode is
enabled for a cell. If
this option is TDLOFD-001077
deselected, TM9 NO NO NO TDLBFD-001001
multi-user pairing in TDLAOFD-110221
closed-loop mode is
disabled.
HighOrderMubfSwit
ch: If this option
and the MuBfSwitch
option are selected,
high-order multi-
user pairing is
enabled in the
downlink for a cell.
If this option is
selected but the
MuBfSwitch option
is deselected, or if
this option is
deselected, high-
order multi-user
Indicates the switch
used to enable or
disable distance-
based handovers. If LBFD-00201804 /
this switch is turned TDLBFD-00201804
on, distance-based LOFD-001072 /
NO NO NO
handovers are TDLOFD-001072
allowed. If this LOFD-001073 /
switch is turned off, TDLOFD-001073
distance-based
handovers are
prohibited.
Indicates the switch
for the access
barring algorithm. If
this parameter is
set to
ACBAR_SWITCH_
DYNAMIC,
intelligent access
barring is enabled.
In this situation, the
access probability
factors for mobile-
originated data and
mobile-originated
signaling are
dynamically
LBFD-002009 /
adjusted based on
TDLBFD-002009
the cell load. If this NO NO NO
LOFD-0700206 /
parameter is set to
TLOFD-0700206
ACBAR_SWITCH_
STATIC, static
access barring is
enabled. In this
situation, the
access probability
factors and average
access barring
durations are
configured in the
access barring
information. If this
parameter is set to
ACBAR_SWITCH_
DISABLE, access
barring is disabled.

Indicates the SFN

uplink scheduling
mode. The uplink
scheduling modes
include the joint
scheduling mode,
NO NO NO None
and the auto-
selection mode
between joint
scheduling and
independent
scheduling.
Indicates the SFN
downlink
scheduling mode.
The downlink
scheduling modes
include the joint
scheduling mode, NO NO NO None
and the auto-
selection mode
between joint
scheduling and
independent
scheduling.

LBBPc boards and

uses one or two RX
antennas,
PrachIrcSwitch of
the IrcSwitch
parameter and the
PrachIntrfRejSwitch
parameter together
control the
interference
rejection technique
applied to the
PRACH. If the
PrachIntrfRejSwitch
parameter is set to
off, interference
rejection is not
applied to the
LOFD-001094 /
PRACH. When the NO NO NO
TDLOFD-001094
PrachIntrfRejSwitch
parameter is set to
on, PrachIrcSwitch
of the IrcSwitch
parameter takes
effect: (1) If
PrachIrcSwitch is
off, MRC is applied
to the PRACH. (2) If
PrachIrcSwitch is
on, MRC/IRC
adaptation is
applied to the
PRACH.
If the eNodeB is
equipped with
LBBPc boards and
uses more than two
this switch is on,
dynamic DRX
applies to newly
admitted UEs to
reduce signaling
overheads or
decrease UE power
consumption. If this
switch is off,
dynamic DRX does
not apply to newly
admitted UEs.
Dynamic DRX
applies to carrier
aggregation (CA)
UEs only when this
switch is on in both
the primary serving LBFD-
cell (PCell) and NO NO NO 002017/TDLBFD-
secondary serving 002017
cell (SCell).
SmartDrxSwitch: If
this switch is on,
smart DRX applies
to newly admitted
UEs that support
mobility speed
reporting. The
eNodeB
dynamically sets
DRX-related
parameters based
on UE mobility
speeds. If this
switch is off, smart
DRX does not apply
to newly admitted

Indicates whether
to enable the high-
mobility-triggered-
idle switch. When
this parameter is
set to ENABLE,
UEs in high mobility
are released and
enter the idle mode,
LOFD-001106
and therefore the NO NO NO
TDLOFD-00110502
signaling impact on
the network caused
by frequent
handovers are
reduced. When this
parameter is set to
DISABLED, UEs in
high mobility are
not released.
2. It is
recommended that
this option be not
selected if the
bandwidth of a cell
is 1.4, 3, 5, or 10
MHz.
3. To avoid
interference from
adjacent GERAN
cells to the PUCCH,
the PUCCH flexible
configuration
(specified by the
PucchFlexCfgSwitc
h option of the
PucchAlgoSwitch
parameter must be
enabled. MRFD-231808
NO NO NO
When the MRFD-101221
TddAvoidUpPTSInt
erfSwitch check box
under this
parameter is
selected, the
UpPTS interference
detection and
avoidance function
is enabled for LTE
TDD cells.
When the
AvoidPrachInterfSw
itch check box
under this
parameter is
selected, the
PRACH
interference
Indicates the switch
used to enable or
disable the GL
dynamic power
sharing algorithm.
This algorithm can
be used when the
GSM and LTE
carriers share the
same power
amplifier. This
improves power
usage and service
quality of LTE UEs
adopting
NO NO NO MRFD-231806
quadrature phase
shift keying (QPSK)
as their modulation
scheme in case that
the GSM and LTE
busy hours appear
at different time
points or that the
traffic is
unbalanced. This
parameter indicates
the switch for the
GL dynamic power
sharing feature at
the LTE side.
Indicates whether
to enable the TDM-
based eICIC
algorithm. The
TDM-based eICIC
algorithm can be
disabled, statically
enabled or
dynamically
enabled. In a
heterogeneous
network (HetNet),
this parameter is
used together with
LAOFD-
the range
NO NO NO 002001/LAOFD-
expansion function
081233
of the micro base
station to expand
the coverage of
micro cells, and
increase the
number of users
absorbed by the
micro cells. To
support TDM-based
eICIC, settings of
this parameter in
macro and micro
cells must be the
same.

Indicates whether
PUCCH resources
are allocated based
on the uplink peak
rate. If this
parameter is set to
ON(On), PUCCH
resources are
flexibly allocated
NO NO NO None
based on the
principle that the
PUCCH is allocated
fewer RBs when
there are only a few
UEs. This
parameter applies
only to LTE TDD
cells.
Indicates the switch
used to enable or
NO NO NO TDLAOFD-081411
disable the DL
CoMP algorithm.
Indicates the option
used to enable or
disable the PSIC
algorithm in a cell.
MumimoPuschPsic
Switch: This option
takes effect in 2x2
UL MU-MIMO
scenarios for LTE
FDD networks. The
PSIC function can
be used for LTE
FDD cells
established on NO NO NO LOFD-001096
UBBPd and LBBPd
boards.
This option takes
effect in 2x4 UL
MU-MIMO and 4x4
UL MU-MIMO
scenarios for LTE
TDD networks. The
PSIC function can
be used only for
LTE TDD cells
established on
UBBPd boards.
blind handover to
an intra-RAT inter-
frequency
neighboring cell for
load balancing.
Otherwise, the
eNodeB does not
perform the blind
handover. If the
InterFreqMlbRedire
ct check box under
this parameter is
selected, the
eNodeB performs a
load-based
redirection to an
LOFD-001032 /
intra-RAT inter-
TDLOFD-001032
frequency
LOFD-001044 / TD
neighboring cell. NO NO NO
LOFD-001044
Otherwise, the
LOFD-001045 /
eNodeB does not
TDLOFD-001045
perform the
redirection.
If the
InterRatMlbRedirect
check box under
this parameter is
selected, the
eNodeB performs a
redirection from an
E-UTRAN cell to a
UTRAN or GERAN
cell. Otherwise, the
eNodeB does not
perform the
redirection.
If the
interference from a
coordinated cell is
hard to mitigate. If
this switch is off, a
UL CoMP UE will
never become a
common UE. This
parameter applies
only to cells
established on the
LBBPc.
UlJointReception3C
ellSwitch indicates
whether three-cell
UL CoMP is
enabled in the
serving cell. If the LOFD-001066 /
UlJointReception3C TDLOFD-001066
ellSwitch option is NO NO NO LOFD-070222
selected for cell A LOFD-070223
and the LAOFD-080203
UlJointReceptionSw
itch option is
selected for cell B,
three-cell UL CoMP
is enabled in cell A
that acts as the
serving cell
regardless of
whether the
UlJointReception3C
ellSwitch option is
selected for cell B
that acts as a
coordinating cell in
an LTE FDD
system. In an LTE
Indicates the switch
used to enable or
disable the antenna
calibration
algorithm. This
parameter applies
only to TDD cells. If
this switch is on,
the virtual antenna
mapping (VAM)
performance of two
groups of 4T cross- NO NO NO TDLOFD-001049
polarized antennas
is improved. If this
switch is off, the
antenna calibration
algorithm is
disabled. It is
recommended that
this switch be on for
two groups of 4T
cross-polarized
antennas.

Indicates whether
to enable dynamic
spectrum sharing in
the E-UTRAN cell.
If the
GLDynSpectrumSh
areSwitch option is
on, GSM and LTE
dynamic spectrum
sharing is enabled.
Parameters
HighFreqShareRbN
um and
LowFreqShareRbN
um must be set NO NO NO MRFD-090202
before GSM and
LTE dynamic
spectrum sharing is
enabled. In GSM
and LTE dynamic
spectrum sharing,
the idle GERAN
spectrum can be
used by the E-
UTRAN cell,
thereby increasing
the bandwidth and
throughput of the E-
UTRAN cell.
Indicates whether
to enable load-
based adaptive
adjustment in the
adaptive
SFN/SDMA feature.
If this switch is
turned on, load-
based adaptive
adjustment is
enabled, which
increases the
proportion of joint-
scheduling UEs and
improves user
experience when
the network load is
light, and increases NO NO NO TDLOFD-002008
the proportion of
independent-
scheduling UEs and
ensures the
spectral efficiency
when the network
load is heavy. If this
switch is turned off,
load-based
adaptive
adjustment in the
adaptive
SFN/SDMA feature
cannot be enabled.
This switch applies
only to LTE TDD
cells.
switch takes effect
only when
MrcIrcAdptSwitch is
on. If
MrcIrcAdaptivefor2
R is on, IRC is
applied to the
PUSCH in 2R
scenarios. If
MrcIrcAdaptivefor2
R is off, MRC/IRC
adaptation is
applied to the
PUSCH in 2R
scenarios.
In 2R cells
established on
LBBPc boards: If
MrcIrcAdptSwitch is LOFD-001012 /
NO NO NO
on, IRC applies to TDLOFD-001012
the PUSCH. If
MrcIrcAdptSwitch is
off, MRC applies to
the PUSCH.
In 2R cells
established on
LBBPd boards: The
setting of
MrcIrcAdaptivefor2
R takes effect only
when
MrcIrcAdptSwitch is
on. If
MrcIrcAdptSwitch
and
MrcIrcAdaptivefor2
R are on, MRC/IRC
adaptation applies
Indicates whether
to enable or disable
adaptive dedicated
cell reselection
priority. If this
parameter is set to
1, the eNodeB
delivers the
dedicated cell
reselection priority
to a UE when the
following conditions
are met: (1) The UE
requests to set up
an RRC connection
with the cause
value being mo- LBFD-00201803 /
NO NO NO
Signalling. (2) The TDLBFD-00201803
MME instructs the
eNodeB to release
the S1 bearer. (3)
The eNodeB fails to
obtain the UE
capability. If this
switch is turned off,
the eNodeB does
not deliver
dedicated cell
reselection priority
to a UE even if the
eNodeB fails to
obtain the UE
capability
information.
to enable intra- and
inter-RAT neighbor
relationship
optimization. This
parameter includes
the following
options:
INTRA_RAT_ANR_
SW: If this option is
selected, intra-RAT
neighbor
relationship
optimization
(including neighbor
relationship addition
and modification)
takes effect. If this
option is LOFD-002001 /
deselected, intra- TDLOFD-002001
NO NO NO
RAT neighbor LOFD-002002 /
relationship TDLOFD-002002
optimization does
not take effect.
INTER_RAT_ANR_
SW: If this option is
selected, inter-RAT
neighbor
relationship
optimization
(including neighbor
relationship addition
and modification)
takes effect. If this
option is
deselected, inter-
RAT neighbor
relationship
optimization does
and reception of
dynamic ACK over
the PUCCH is
disabled when the
adaptive
SFN/SDMA feature
is enabled.
SuperCombCellSwit
ch: Indicates
whether to enable
the super combined
cell feature. If this
option is selected,
the super combined
cell feature is
enabled. If this
option is
deselected, the
TDLOFD-002008
super combined cell NO NO NO
LOFD-081221
feature is disabled.
SfnDl2LoadLevelAd
ptSwitch: Indicates
whether to enable
downlink two-load-
level adaptation in
an SFN cell. This
option applies only
to TDD. If this
option is selected,
downlink two-load-
level adaptation is
enabled when the
adaptive
SFN/SDMA feature
is enabled. If this
option is
deselected,
to suppress
interference on the
PRACH. This
parameter takes
effect only on the
eNodeB uses the
LBBPc and one or
two RX antennas. If
this parameter is
set to OFF, the
interference on the
PRACH is not
suppressed. If this
parameter is set to
ON, the
PrachIrcSwitch
option of the
IrcSwitch parameter
LOFD-
takes effect. If the
NO NO NO 001094/TDLOFD-
PrachIrcSwitch
001094
option of the
IrcSwitch parameter
is cleared,
interference on the
PRACH is
suppressed based
on the maximum
ratio combining
(MRC). If the
PrachIrcSwitch
option of the
IrcSwitch parameter
is selected,
interference on the
PRACH is
suppressed based
on the interference
rejection combining
Indicates whether
to enable enhanced
MIMO. This
parameter now
includes one
switch. TM9Switch: LAOFD-080210
Indicates whether LAOFD-080205 /
accessing UEs are TDLAOFD-
allowed to enter 00100113
NO NO NO
TM9 mode. TDLAOFD-
Accessing UEs are 00100114
allowed to enter the TDLAOFD-080406
TM9 mode only TDLAOFD-080407
when this switch is
on. This parameter
does not apply to
cells established on
the LBBPc.
Indicates the
interference
randomization
algorithm applied to
TDD and FDD
eNodeBs.
If this parameter is
set to OFF, the
interference
randomization
algorithm is
disabled.
If this parameter is
set to
ECO_BASED, the
TDLBFD-070111
eCoordinator-based
NO NO NO TDLOFD-070223
interference
LOFD-00101502
randomization
algorithm is
enabled, which
applies only to TDD
eNodeBs.
If this parameter is
set to
ENB_BASED, the
eNodeB-based
interference
randomization
algorithm is
enabled, which
applies to both TDD
and FDD eNodeBs.

Indicates the type

of reference signal
(RS) power to be
delivered in system
information block
type 2 (SIB2). If the
AntRsPwrSwitch
option is selected,
the RS power
calculated based on
the AntOutputPwr
parameter value is
delivered in SIB2. If NO NO NO LBFD-002016
the
AntRsPwrSwitch
option is not
selected, the RS
power specified by
the
ReferenceSignalPw
r parameter is
delivered in SIB2.
This parameter
applies only to LTE
FDD.
based on the
frequency
measurement
priorities. A higher-
priority frequency is
mapped to a
smaller
MeasObjectID. If
this switch is off, the
eNodeB does not
map neighboring
frequencies to
MeasObjectIDs
based on the
frequency
measurement
LBFD-00201802 /
priorities.
TDLBFD-00201802
VoipMeasFreqPriS
LBFD-00201804 /
witch: Indicates NO NO NO
TDLBFD-00201804
whether the
LBFD-00201805 /
frequency priority
TDLBFD-00201805
specified by the
VoipPriority
parameter takes
effect during
coverage-based
handovers for VoIP
UEs. If this switch is
on, the eNodeB
only delivers the
highest-priority
intra-RAT
frequencies
different from the
serving frequency
based on the
settings of the
Indicates whether
to enable or disable
HARQ-related
algorithms. If the
TddAckFbModeCfg
OptSwitch is on, the
HARQ-ACK
feedback mode is
reconfigured based
NO NO NO TDLBFD-002005
on UE services. If
the
TddAckFbModeCfg
OptSwitch is off, the
HARQ-ACK
feedback mode is
not reconfigured
based on UE
services.
HANDOVERIMME
DIATELY(Handover
Immediately), the
eNodeB
immediately
determines whether
to perform a
coverage-based
inter-frequency
handover when
receiving a
measurement
report. If this
parameter is set to
BASEDONSIGNAL
STRENGTH(Based
on Signal Strength),
the eNodeB waits a
moment and then LBFD-00201802 /
NO NO NO
determines whether TDLBFD-00201802
to perform a
coverage-based
inter-frequency
handover to the
strongest
neighboring cell
indicated by the
received
measurement
reports. If this
parameter is set to
BASEDONFREQP
RIORITY(Based on
Frequency Priority),
the eNodeB waits a
moment and then
determines whether
to perform a
Indicates whether
the eNodeB
broadcasts the
coordinated
universal time
(UTC) in the LTE
system over the air
interface. If this
LOFD-080215
parameter is set to
LBFD-002009 /
1, the eNodeB
NO NO NO TDLBFD-002009
broadcasts the UTC
LOFD-070220 /
in the LTE system
TDLOFD-070220
using system
information block
type 16 (SIB16). If
this parameter is
set to 0, the
eNodeB does not
broadcast the UTC
in the LTE system.
Indicates whether
to enable a specific
scheduling policy in
the uplink and
downlink.
AbnUeSchSwitch:
Indicates whether LOFD-00101502 /
to disable TDLOFD-00101502
NO NO NO
scheduling of LBFD-002025 /
abnormal UEs. If TDLBFD-002025
this switch is on,
abnormal UEs are
not scheduled. If
this switch is off,
abnormal UEs are
scheduled.

Indicates whether
to enable the Soft
Split Resource
Duplex (SSRD)
algorithm.
SsrdDl8TAlgoSwitc
h: If this switch is
on, the soft split
multi-user pairing
NO NO NO TDLOFD-080204
algorithm is
enabled in the
downlink.
If this switch is off,
the soft split multi-
user pairing
algorithm is
disabled in the
downlink.
CoMP is enabled in
an SFN cell.
IntraBaseBandSwit
ch:on and
InterBaseBandSwit
ch:on: Both intra-
BBP UL CoMP and
inter-BBP UL CoMP
are enabled in an
SFN cell.
IntraBaseBandSwit
ch:off and
InterBaseBandSwit
ch:on: This setting
is invalid.
ComCoverUlComp
Switch:on: UL
CoMP is supported
LOFD-003029
when multiple RF NO NO NO
LOFD-070205
modules provide
the same coverage
in an SFN cell.
ComCoverUlComp
Switch:off: UL
CoMP is not
supported when
multiple RF
modules provide
the same coverage
in an SFN cell.
ComCoverUlComp
Switch applies only
to TDD, not FDD.
SfnUplinkComp3Ce
llSwitch: This switch
takes effect when
IntraBaseBandSwit
Indicates whether
to enable the inter-
frequency
directional
handover algorithm
for low-speed UEs.
If this switch is
turned on, the
eNodeB instructs
low-speed UEs in LOFD-081228
NO NO NO
RRC_CONNECTE TDLOFD-080205
D mode in networks
dedicated to high-
speed railways to
measure low-speed
inter-frequency cells
to hand over the
UEs to low-speed
inter-frequency
cells.
Indicates whether
to enable or disable
the relay-related
functions. This
parameter is
dedicated to LTE
TDD cells.
OutOfBandRelayS
witch: Indicates
whether to enable
NO NO NO TDLAOFD-080405
or disable the out-
of-band relay
feature. If this
switch is on, the
out-of-band relay
feature is enabled.
If this switch is off,
the out-of-band
Relay function is
disabled.

Indicates whether
to enable the inter-
frequency
directional
handover algorithm.
If this switch is
turned on, the
eNodeB instructs
UEs in LOFD-081228
NO NO NO
RRC_CONNECTE TDLOFD-080205
D mode in networks
dedicated to high-
speed railways to
measure inter-
frequency cells to
hand over the UEs
to high-speed inter-
frequency cells.
Indicates whether
to apply the power
decrease
mechanism on
reference signal
(RS) power and
physical
synchronization
channel (PSCH)
power. If this
parameter is set
OFF, the physical
NO NO NO None
downlink shared
channel (PDSCH)
transmit power is
lowered, the RS
power and PSCH
power are not
lowered. If this
parameter is set to
ON, all of the
PDSCH power, RS
power, and PSCH
power are lowered.

Indicates whether
channel quality
indicator (CQI)
detection errors can
be identified in the
presence of
interference. If this
switch is on, CQI
detection errors can
NO NO NO None
be identified, and a
historical CQI is
used in the
eNodeB. If this
switch is off, CQI
detection errors
cannot be identified
in the presence of
interference.
which ensures
accurate adaptive
switchover between
maximum ratio
combining (MRC)
and interference
rejection combining
(IRC). This
parameter takes
effect only when
PucchIrcSwitch of
the IrcSwitch
parameter is 1.
When
PucchIrcSwitch is 0,
setting the
PucchIRCEnhance
parameter to ON LOFD-
and turning on NO NO NO 001094/TDLOFD-
PucchIrcSwitch 001094
improves the
PUCCH detection
performance,
compared with the
scenarios where
PucchIrcSwitch is 0
and the
PucchIRCEnhance
parameter is set to
0.
In scenarios with
PucchIrcSwitch
turned on, setting
the
PucchIRCEnhance
parameter to ON
decreases the
video services. This
parameter takes
effect only when the
AcBarAlgoSwitch
parameter in the
CellAlgoSwitch MO
is set to
ACBAR_SWITCH_
DYNAMIC.
DYNAMIC_FOR_M
O: Indicates
whether to enable
intelligent access
barring on UEs
running MO
signaling or MO
data.
LOFD-008002 /
If this switch is on,
TDLOFD-080202
intelligent access NO NO NO
LOFD-070207 /
barring applies to
TDLOFD-081222
UEs running MO
signaling or MO
data.
If this switch is off,
intelligent access
barring does not
apply to UEs
running MO
signaling or MO
data.
DYNAMIC_FOR_S
SAC: Indicates
whether to enable
intelligent access
barring on UEs
running MMTEL
voices services or
CellRangeExpansio
n parameter takes
effect in a HetNet.
If this parameter is
set to OFF and
static or dynamic
eICIC is enabled,
the
CellRangeExpansio
n parameter takes
effect.
If this parameter is
set to ON and
dynamic eICIC is
enabled, the
CellRangeExpansio
n parameter takes
effect according to
LOFD-001099 /
the dynamic eICIC NO NO NO
LAOFD-081233
algorithm; If this
switch is turned on
in other cases (that
is, dynamic eICIC is
disabled, static
eICIC is enabled, or
static eICIC is
disabled), the
CellRangeExpansio
n parameter takes
effect for all UEs
(including R8 and
R9 UEs) in the cell.
For macro and
micro cells in a
HetNet, it is
recommended that
this parameter be
Indicates whether
MLB for low-
efficiency UEs is
enabled. The
InterFreqBackoffSw
itch check box
under this
parameter indicates
whether inter-
frequency MLB for
low-efficiency UEs
is enabled.
When this check
NO NO NO TDLOFD-081212
box is selected,
inter-frequency
MLB for low-
efficiency UEs is
enabled. When this
check box is
deselected, inter-
frequency MLB for
low-efficiency UEs
is disabled.
This parameter
applies only to LTE
TDD cells.
Indicates whether
to enable eNodeB-
level handovers to
be activated in the
cell when related
eNodeB-level
handover switches
are on.
SrvBasedInterFreq
HoSw: Indicates
LBFD-00201805 /
whether to enable NO NO NO
TDLBFD-00201805
service-based inter-
frequency handover
to be activated in
the cell. Service-
based inter-
frequency handover
is allowed to be
activated in the cell
only when this
switch is on.
INTRA_RAT_NCEL
L_CLASS_SW: If
this switch is on,
IntraRatEventAnrS
witch is on, and the
ANR indicator is set
to ALLOWED for
this frequency, the
neighboring cell
classification label
is automatically
marked for a
neighboring cell
based on the
handover times
within a specified
period of time.
NCELL_CLASS_H
LOFD-
O_POLICY_SW: If
NO NO NO 081225/TDLOFD-
this switch is on,
081225
IntraRatEventAnrS
witch is on, the ANR
indicator is set to
ALLOWED for this
frequency, and the
NCellClassLabel
parameter value is
EXTENDED, target
cells for handovers
must be determined
based on E-UTRAN
cell global identifier
(ECGI) reading.
NCELL_CLASS_P
CI_CONFLICT_SW
: If this switch is on,
PCI conflict
detection and
ch is selected, PCI-
based intra-RAT
ANR is enabled to
construct and
optimize
neighboring
relationships
between common
cells and cells with
special PCIs.
PciConflictDetectPo
licySwitch: Indicates
whether to enable
PCI-based PCI
conflict detection. If
this option is
selected and
CONFUSION_DET
LOFD-081207 /
ECT_SWITCH of NO NO NO
TDLOFD-081207
the
PciConflictDetectS
witch parameter is
selected, PCI-
based PCI conflict
detection is
enabled. If the
eNodeB attempts to
configure a cell with
a special PCI that
operates on the
same frequency
and has the same
PCI with any
configured
neighboring cell of
a common cell as
another neighboring
Indicates whether
to enable passive
intermodulation
(PIM) interference
mitigation in the
cell. PIM
interference
mitigation is
performed on cells
generating
intermodulation
interference on
each other if the
following conditions
are met: (1) This
NO NO NO None
parameter is set to
1; (2) The eNodeB
is equipped with an
LPMP; (3) Cells are
added to a PIM
interference
mitigation cell set. If
this parameter is
set to 0, PIM
interference
mitigation is not
performed on cells.
This parameter
applies only to FDD
macro eNodeBs.

Indicates whether
to enable joint
reception on the
PRACH in 16T16R
LTE TDD networks.
If the
PrachJointReceptio
nSwitch parameter
is set to ON, joint
reception on the
PRACH is enabled. NO NO NO None
If the
PrachJointReceptio
nSwitch parameter
is set to OFF, joint
reception on the
PRACH is disabled.
This parameter
applies only to
16T16R LTE TDD
networks.
Indicates whether
to enable the
FeICIC algorithm.
The FeICIC
algorithm can be
disabled and
enabled.In a
heterogeneous
network (HetNet). If
this algorithm is
used together with
the appropriate
range expansion
function of the
micro base station NO NO NO LAOFD-081234
and Dynamic TDM
eICIC algorithm,the
coverage of micro
cells can be
expanded and the
number of users
absorbed by the
micro cells
increased. To
support FeICIC
algorithm , settings
of the EicicSwitch in
macro cells must be
the DYNAMIC.
Indicates whether
to enable
coordinated AMC in
the cell.
This parameter
includes the
following check
boxes:
UlCamcSw:
LOFD-
Indicates whether
081206/TDLOFD-
to enable uplink NO NO NO
110205
coordinated AMC in
TDLOFD-110206
a cell.
UlInterEnbCamcSw
: Indicates whether
to enable uplink
inter-eNodeB
coordinated AMC in
a cell. This check
box applies only to
LTE TDD cells.

Indicates whether
to enable MPMU-
level UE
identification in
LampSite eNodeBs.
If this parameter is
set to ON(On), the
eNodeB generates NO NO NO None
the mapping
between UEs and
MPMUs for MPMU-
level maintenance
and commissioning
based on CHRs
and counters.
eNodeB works with
the eCoordinator to
perform
coordinated
scheduling between
public and
dedicated networks.
If this option is
deselected,
coordinated
scheduling and
interference
resistance in high-
speed railway
scenarios is
disabled. This
parameter applies
only to LTE TDD.
HighSpeedUserRed
NO NO NO TDLOFD-081218
irectSwitch:
Indicates whether
to redirect high-
speed UEs to high-
speed frequencies.
If this option is
selected in a
common cell near
the high-speed
railway, the eNodeB
redirects the UEs
that are handed
over frequently to a
high-speed railway
dedicated network.
In other scenarios,
it is recommended
that this option be
deselected. This
Indicates whether
to enable the
functions related to
service
differentiation.
VideoRateAdaptSwi
tch: If this option is
deselected,
adaptive data rate
adjustment for
video services is
disabled. If this
option is selected,
adaptive data rate LOFD-
adjustment for NO NO NO 081202/LOFD-
video services is 081203
enabled.
DownLoadRateLimi
tSwitch: If this
option is
deselected,
download data rate
control during busy
hours is disabled. If
this option is
selected, download
data rate control
during busy hours
is enabled.

Indicates whether
to enable GBR
assurance for
extended-QCI-
based PTT
services. If this
LOFD-081218
parameter is set to NO NO NO
TDLOFD-110230
ON(On), the cell
ensures the GBR
for PTT voice and
data services
supported by the
dedicated bearer.
Indicates whether
to enable allocation
enhancement for
SRS and PUCCH
resources. When
this parameter is
set to ON,
allocation
enhancement for
SRS and PUCCH
resources is
enabled and
inaccurate resource
LBFD-002003 /
allocation caused NO NO NO
TDLBFD-002003
by the delay of cell
load update no
longer occurs.
When this
parameter is set to
OFF, the general
resource allocation
procedure is used
and inaccurate
resource allocation
caused by the delay
of cell load update
occurs.
Indicates whether
the
UeInactiveTimerQci
1 parameter takes
effect. If
UEInactiveTimerQC
I1Switch is on,
UeInactiveTimerQci
1 takes effect; when
there are QCI 1
services, the UE
inactivity timer LOFD-081229 /
NO NO NO
length is specified TDLOFD-081229
by
UeInactiveTimerQci
1. If
UEInactiveTimerQC
I1Switch is off,
UeInactiveTimerQci
1 does not take
effect and the UE
inactivity timer
length is specified
by UeInactiveTimer.
coordinating cells
are not connected
based on relaxed
backhaul. If this
option is
deselected, UL
CoMP among such
cells is disabled.
This option applies
only to LTE FDD.
Ul2R8RJRSwitch:
Indicates whether
to enable UL CoMP
among cells each
with two RX
LOFD-001066 /
antennas and cells
TDLOFD-001066
each with eight RX
LOFD-070222 /
antennas. If this
TDLOFD-081208
option is selected, NO NO NO
LOFD-070223 /
UL CoMP among
TDLOFD-081207
such cells is
LOFD-003029
enabled. If this
LOFD-070205
option is
deselected, UL
CoMP among such
cells is disabled.
This option applies
only to LTE TDD
cells in cell
combination
scenarios.
Ul4R8RJRSwitch:
Indicates whether
to enable UL CoMP
among cells each
with four RX
antennas and cells
Indicates whether
to enable the phase
shift algorithm for
virtual antenna
mapping in four-
NO NO NO TDLOFD-001001
antenna scenarios
with two CRS ports.
This parameter
applies only to LTE
TDD cells.
Indicates whether
to enable automatic
neighbor relation
(ANR) functions for
the cell. This
parameter provides
the following option:
BACKWARD_ANR_
SW: When
IntraRatEventAnrS
witch or
IntraRatFastAnrSwit
ch under the
AnrSwitch
parameter in the
LOFD-002001 /
ENodeBAlgoSwitch NO NO NO
TDLOFD-002001
MO and
BACKWARD_ANR_
SW are both on for
the target cell of an
ANR procedure, the
cell can add the
source cell to its
NCL and NRT after
obtaining source
cell information. If
BACKWARD_ANR_
SW is off, the target
cell does not add
the source cell to its
NCL or NRT.
Indicates whether
to enable the
downlink 256QAM
algorithm.
Dl256QamSwitch: If
this option is
selected, downlink
256QAM takes
effect, and the
maximum downlink
LBFD-002025 /
modulation mode is
TDLBFD-002025
256QAM for UEs
LOFD-00101502 /
that support NO NO NO
TDLOFD-00101502
downlink 256QAM.
LAOFD-090201 /
If this option is
TDLAOFD-090201
deselected,
downlink 256QAM
does not take effect
and the maximum
downlink
modulation mode is
64QAM. This option
takes effect only in
cells established on
UBBP boards.

Indicates whether
to enable automatic
grouping for MLB. If
automatic grouping
for MLB is enabled,
the eNodeB
identifies the
proportion of
coverage overlap
NO NO NO LOFD-110219
between the
serving and an
inter-frequency
neighboring cell
and automatically
sets or clears the
overlap indicator for
the neighboring
cell.
Indicates whether
to enable automatic
grouping for carrier
aggregation. If
automatic grouping
is enabled, the
eNodeB identifies
the proportion of
overlap between
NO NO NO LOFD-110219
serving and inter-
frequency
neighboring cells
and automatically
sets, modifies, or
clears the blind
SCell configuration
flag for the
neighboring cell.

Indicates whether
to enable automatic
configuration of
macro-micro
associations. If this
parameter is set to
ON, a micro cell
performs
measurements to
determine the
associated macro
cell. The macro-
micro association is
updated at the
specified time. If
NO NO NO LOFD-090214
this parameter is
set to OFF, macro-
micro associations
cannot be
automatically
configured.
Automatic
configuration of
macro-micro
associations
requires that this
parameter be set to
ON for all macro
and micro cells
involved.
Indicates whether
to enable cell
coverage
enhancement.
Turning on this
NO NO NO LOFD-090217
switch can increase
the throughput of
cell edge users and
improve cell
coverage.
is selected, semi-
persistent
scheduling is
applied. If this
option is
deselected,
dynamic scheduling
is applied.
UlVoipRbRsvSwitch
: Indicates whether
to reserve PUSCH
RBs for UEs
running voice
services in the
LOFD-110205
uplink. PUSCH RBs
LOFD-001048 /
are reserved for
TDLOFD-001048
UEs running voice
LOFD-001016 /
services in the
TDLOFD-001016
uplink only when NO NO NO
LOFD-081218 /
this option is
TDLOFD-110230
selected. This
LOFD-00101502 /
option applies only
TDLOFD-00101502
to LTE FDD.
TDLBFD-002025
UlThpEnhSwitch:
Indicates whether
to enable uplink
throughput
enhancement. If
this option is
selected and the
number of UEs is
small, the PUCCH
overhead is
calculated based on
the number of RBs
occupied by the
PUCCH during
Indicates whether
to enable the uplink
data compression
algorithm in a cell.
This parameter
applies only to LTE
TDD networks.
BasicUdcSwitch:
Indicates whether
to enable the uplink
Qualcomm data
compression NO NO NO None
algorithm in a cell. If
this check box is
selected, uplink
Qualcomm data
compression is
enabled. If this
check box is
deselected, uplink
Qualcomm data
compression is
disabled.
ferSwitch: Indicates
whether to allow
preferential
accesses for UEs
initiating VoLTE
services during
access class
control. If this
option is selected,
voice preference
information is
included in SIB2 to
ensure that access
class control does
not apply to UEs
initiating MMTEL
voice services,
MMTEL video
services, IP-based LOFD-110219 /
NO NO NO
short message TDLOFD-110219
services, or short
message services
based on the
setting of the
VoLTEPreferCfgInd
parameter in the
CellAcBar MO. If
this option is
deselected, voice
preference
information is not
included in SIB2,
and access class
control applies to
UEs initiating
MMTEL voice
services, MMTEL
video services, IP-
Indicates whether
to enable self-
rectification on
voice decryption
failures or RLC SN
changes. When
voice decryption
fails due to
disordered PDCP
SNs or packet loss
occurs due to RLC
SN changes,
enabling this
function allows
detection and self-
rectification on
NO NO NO None
voice decryption
failures and RLC-
SN-change-induced
packet loss, and
disabling this
function does not
allow detection and
self-rectification on
voice decryption
failures or RLC-SN-
change-induced
packet loss. The
length of detecting
RLC-SN-change-
induced packet loss
is fixed to 5s.
not include the IE
deprioritisationReq.
If this parameter is
set to
FREQUENCY(FRE
QUENCY), the
RRCConnectionRej
ect message
includes the IE
deprioritisationReq
and the value of the
IE
deprioritisationType
is FREQUENCY. In
this case, after the
UE receives an
RRCConnectionRej
ect message, the
LBFD-002007 /
lowest cell NO NO NO
TDLBFD-002007
reselection priority
is configured for the
serving frequency
and the frequencies
contained in the
RRCConnectionRej
ect messages that
have been received
and include the IE
deprioritisationReq.
If this parameter is
set to
EUTRA(EUTRA),
the
RRCConnectionRej
ect message
includes the IE
deprioritisationReq
Indicates whether
to enable
LOFD-001092 /
commercial mobile NO NO NO
TDLOFD-001092
alert system
(CMAS).
COLLISION_REPO
RT_SW: If this
option is selected,
check results about
whether PCI
collisions occur
between the local
cell and other intra-
eNodeB cells or
between the local
cell and external
cells are reported to
the U2000. If this
option is
deselected, the
check results are
not reported to the
U2000. For details
about PCI LOFD-002007 /
NO NO NO
collisions, see TDLOFD-002007
3GPP TS 36.902.
CONFUSION_REP
ORT_SW: If this
option is selected,
check results about
whether PCI
confusions occur
between candidate
target neighboring
cells whose
neighbor
relationships with
the local cell are
recorded in the
NRTs are reported
to the U2000. If this
option is
deselected, the
frequency handover
scenarios.
IntraFreqReselOptS
witch: If this option
is selected, the
eNodeB
dynamically adjusts
intra-frequency cell
reselection
parameters, which
reduces the number
of unnecessary
handovers and
ensures a steady
handover success
rate. If this option is
deselected, the
eNodeB does not
adjust intra- LOFD-002005 /
NO NO NO
frequency cell TDLOFD-002005
reselection
parameters.
UtranUnnecHoOptS
witch: If this option
is selected, the
eNodeB
dynamically adjusts
parameters about
handovers from E-
UTRAN to UTRAN
to reduce the
number of
unnecessary
handovers from E-
UTRAN to UTRAN,
increase the
probability that UEs
camp in LTE
NoUserCellRecover
ySwitch: This option
controls whether
the eNodeB detects
a cell serves UEs
when reestablishing
the cell. If this
option is selected,
the eNodeB does
not check whether
a cell serves UEs
and performs cell NO NO NO None
reestablishment
directly to improve
cell specifications. If
this option is
deselected, the
eNodeB performs
cell reestablishment
to improve cell
specifications when
the cell does not
serve UEs.

Indicates whether
traffic-based MLB
algorithms are
enabled.
UlHeavyTrafficMlbS
witch: Indicates
whether to enable
uplink heavy traffic-
based MLB. If this
option is selected,
uplink heavy traffic-
based MLB is
enabled, and UEs NO NO NO TDLOFD-081236
with heavy traffic in
the uplink are
handed over to the
target neighboring
cell during MLB. If
this option is
deselected, uplink
heavy traffic-based
MLB is disabled.
This option applies
only to LTE TDD
networks.
related optimization
algorithms are
enabled.
GSM_MEAS_DEL_
INTERFREQ_SW:
Indicates whether
to release inter-
frequency
measurements after
a GSM
measurement is
triggered when the
UE is performing
VoIP services. If the
UE is performing
VoIP services and
this option is
selected, the
LOFD-001023 /
eNodeB releases NO NO NO
TDLOFD-001023
all inter-frequency
measurements
when a GSM
measurement is
triggered. This
reduces the GSM
measurement
reporting delay. If
the UE is
performing VoIP
services and this
option is
deselected, the
eNodeB does not
release inter-
frequency
measurements
when the GSM
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the band
division scheme
used in downlink
ICIC. The band
division in the cell is
adjusted according
to the setting of this
LBFD-00202201 /
parameter so that
NO NO NO TDLBFD-00202201
the edge bands for
LOFD-00101401
neighboring cells do
not overlap. If this
parameter is set to
INVALID, the cell
does not distinguish
center and edge
bands.
eNodeB selects cell
edge users (CEUs)
from the users
whose G factors
are less than this
threshold.
Determine the
parameter value
based on the
distribution of UEs'
modulation and
coding scheme
(MCS) indexes
within an area so
that about one third
users are
determined to be
CEUs. For
example, if an area
NO NO NO LOFD-060201
is covered by 155
cells and the
percentages of
users whose MCS
indexes are less
than 6 and 7 are
about 30% and
40%, respectively,
you can set this
parameter to 1.
(The G factors
corresponding to
MCS indexes 6 and
7 are 0.5 dB and
1.45 dB,
respectively.) The G
factors
corresponding to
MCS indexes 0 to
Indicates the RSRP
threshold used to
determine noise-
limited UEs on the
network. If none of
the neighboring-cell
RSRP values
included in A3
reports sent by a
UE exceeds this
threshold, the
eNodeB does not
consider these A3
reports when
calculating NO NO NO LOFD-060201
interference. In
most cases, the
recommended
RSRP threshold is
-102. In tests on
small-scale
networks, this
parameter can be
set to other values.
(The actual RSRP
value is equal to
-140 plus the GUI
value of this
parameter.)

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the offset
of the DCI power
relative to the LBFD-002003 /
reference signal TDLBFD-002003
NO NO NO
power when the LBFD-002016 /
PDCCH channel TDLBFD-002016
carries dedicated
control information.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
 LBFD-002016 /
Indicates the PA
TDLBFD-002016
value of cell center
NO NO NO LBFD-00202201 /
UEs when DL ICIC
TDLBFD-00202201
is enabled.
LOFD-00101401
 LBFD-002016 /
Indicates the PA
TDLBFD-002016
value of cell edge
NO NO NO LBFD-00202201 /
UEs when DL ICIC
TDLBFD-00202201
is enabled.
LOFD-00101401

Indicates the
interval for
evaluating the cell
edge load when the
BFModeUserAdptP
TDLOFD-001049
wrSwitch check box
NO NO NO TDLOFD-001061
is selected under
TDLBFD-002016
the DlPcAlgoSwitch
parameter. This
parameter applies
only to LTE TDD
networks.
edge load for
determining
whether to increase
the power of
beamforming UEs
in the local cell
when the
BFModeUserAdptP
wrSwitch check box
is selected under
the DlPcAlgoSwitch
parameter. If the
neighboring cell
edge load is greater
than the threshold
specified by this
parameter, the
power of
TDLOFD-001049
corresponding
NO NO NO TDLOFD-001061
beamforming UEs
TDLBFD-002016
in the local cell
edge is not
increased. If the
neighboring cell
edge load is less
than or equal to the
specified threshold
and the number of
neighboring cells
meeting this
condition is less
than or equal to a
specified ratio, the
power of
corresponding
beamforming UEs
in the local cell
edge is increased.
neighboring cells
whose cell edge
load meets the
specified threshold.
This ratio is used to
determine whether
to increase the
power of
beamforming UEs
when the
BFModeUserAdptP
wrSwitch check box
is selected under
the DlPcAlgoSwitch
parameter. If the
ratio of the number
of neighboring cells
meeting the cell
TDLOFD-001049
edge load threshold
NO NO NO TDLOFD-001061
is greater than the
TDLBFD-002016
value of this
parameter, the
power of all
beamforming UEs
in the local cell is
not increased. If the
ratio of the number
of neighboring cells
meeting the cell
edge load threshold
is less than or equal
to the value of this
parameter, the
power of
beamforming UEs
in the local cell is
increased. This
parameter applies
Indicates the period
during which the
increased value of
the beamforming
UE power remains
unchanged when
the TDLOFD-001049
BFModeUserAdptP NO NO NO TDLOFD-001061
wrSwitch check box TDLBFD-002016
is selected under
the DlPcAlgoSwitch
parameter. This
parameter applies
only to LTE TDD
cells.
Indicates the offset
for event A3
reporting when the
BFModeUserAdptP
wrSwitch check box
is selected under
the DlPcAlgoSwitch
parameter. This
offset is the
difference between
the quality of a
neighboring cell TDLOFD-001049
and that of the NO NO NO TDLOFD-001061
serving cell. If this TDLBFD-002016
parameter is set to
a large value, event
A3 is reported only
if the signal quality
of the neighboring
cell is significantly
better than that of
the serving cell.
This parameter
applies only to LTE
TDD networks.

Indicates the offset

for event A6
reporting in CA
scenarios when the
BFModeUserAdptP
wrSwitch check box
is selected under
the DlPcAlgoSwitch
parameter. This
offset is the
difference between
the quality of a
TDLOFD-001049
neighboring cell
NO NO NO TDLOFD-001061
and that of the
TDLBFD-002016
serving cell. If this
parameter is set to
a large value, event
A6 is reported only
if the signal quality
of the neighboring
cell is significantly
better than that of
the serving cell.
This parameter
applies only to LTE
TDD networks.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the power

offset between the
PHICH transmit(TX)
power and the
LBFD-002016 /
reference NO NO NO
TDLBFD-002016
signal(RS) power.
This offset is used
when PHICH power
control is disabled.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
high. The QoS and
fairness among
users, however,
cannot be ensured.
The Max C/I
scheduling policy
can be used to
verify the maximum
capacity of the
system. The RR
scheduling policy is
the fairest
scheduling policy.
When RR is
adopted, the
system capacity is
the smallest.
Therefore, RR is LBFD-002025 /
used only to verify TDLBFD-002025
NO NO NO
the upper bound of TDLOFD-001015
the scheduling TDLOFD-00101502
fairness in the
system. In terms of
the scheduling
effect, the PF
scheduling policy is
between the
previous two
policies. Therefore,
PF can be used to
verify the capacity,
coverage, and
fairness of the
system. The EPF
scheduling policy
supports the
features such as
user QoS, system
Indicates the
percentage of free
shared RBs on the
PDSCH in
scheduling based
on pay-free users
and pay users. The
other RBs on the
PDSCH are
allocated to pay
users. When
sufficient capacity is
available, the
percentage of RBs
occupied by pay-
free users and that
occupied by pay NO NO NO None
users will reach the
preset values.
Changes in this
parameter affect the
percentage of RBs
for pay-free users
and that for pay
users. Modifying
the value of this
parameter for an
active cell will lead
to the re-setup of
the cell.This
parameter applies
only to LTE TDD
cells.

Indicates the
maximum number
LOFD-001001 /
of layers (the rank)
TDLOFD-001001
in the
LOFD-001003 /
implementation of NO NO NO
TDLOFD-001003
multiple-input
LOFD-001060 /
multiple-output
TDLOFD-001060
(MIMO) in DL
scheduling.
be basic scheduling
or differentiated
scheduling. (If CA is
applied in the
uplink, this
parameter also
indicates the uplink
scheduling polity.) If
the CA basic
scheduling policy is
LAOFD-00100101
adopted, the
LAOFD-00100102
eNodeB calculates
LAOFD-00100201 /
the proportional fair
TDLAOFD-001002
(PF) scheduling
LAOFD-00100202 /
priority of each
TDLAOFD-
component carrier
00100102
(CC) for a CA UE
LAOFD-070201 /
using the total data
TDLAOFD-070201
rates on both CCs NO NO NO
LAOFD-070202
of this CA UE. In
TDLAOFD-
this way, CA UEs
00100111
and non-CA UEs
LOFD-001015 /
can be allocated
TDLOFD-001015
similar number of
LOFD-00101501 /
RBs. If the CA
TDLOFD-00101501
differentiated
LOFD-00101502 /
scheduling policy is
TDLOFD-00101502
adopted, the
eNodeB calculates
the PF scheduling
priority of each CC
for a CA UE using
the data rate only
on the primary
component carrier
(PCC) or secondary
component carrier

Indicates the
proportion of
resources reserved
for non-GBR
services. A
proportion of
resources is
reserved
periodically to
prevent non-GBR
services from failing
LOFD-00101502 /
to be allocated NO NO NO
TDLOFD-00101502
resources. During
the periods when
resources are
reserved, resources
are scheduled
preferentially for
non-GBR services.
If this parameter is
set to 0, resources
are not reserved for
non-GBR services.
Indicates the
capacity factor for
downlink enhanced
proportional fair
(EPF) scheduling.
This factor affects
the scheduling
priorities of UEs LOFD-00101502 /
NO NO NO
running services TDLOFD-00101502
with the QCI of 6, 7,
8, or 9, and
accordingly can be
used to adjust the
cell capacity and
fairness among
users.
Indicates the
selection ratio
threshold for the
function of lowering
the modulation and
coding scheme
(MCS) index to
increase the
number of resource
blocks (RBs) with
priority for UEs
running services
with small packets.
If the threshold of LOFD-00101502/
NO NO NO
TTIs within which TDLOFD-00101502
downlink
scheduling is
performed and RBs
are surplus is less
than this parameter
value, the function
is enabled.The
value 0 indicates
that the function is
disabled. The value
100 indicates that
the function is
always enabled.
Indicates the
resource block (RB)
allocation mode for
cell edge users
(CEUs) when
downlink ICIC is
enabled. If this
parameter is set to
ALL_EDGE_USER,
RBs in the current
transmission time
interval (TTI) are LBFD-
firstly allocated to 002025/TDLBFD-
cell center users 002025
NO NO NO
(CCUs) and then LOFD-
allocated to all 00101502/TDLOFD
CEUs. If this -00101502
parameter is set to
PART_EDGE_USE
R, RBs in the
current TTI are
firstly allocated to
CCUs and then
allocated to the
CEUs to which RBs
have not been
allocated within this
TTI.

Indicates the
scheduling policy
used when
downlink ICIC is
enabled. If this
parameter is set to
EDGE_USER_NO_
PRIO, both cell
center users
(CCUs) and cell
edge users (CEUs)
LBFD-
can preempt edge
002025/TDLBFD-
bands, thereby
002025
improving CCUs' NO NO NO
LOFD-
performance. If this
00101502/TDLOFD
parameter is set to
-00101502
EDGE_USER_PRI
O, CCUs are
scheduled at both
the center band and
the edge band only
after CEUs have
been scheduled at
the edge band, and
therefore CEUs'
performance
improves.
Setting this
parameter to
ROUND_UP
wastes a few RBs,
but decreases
scheduling times
and increases
downlink data rate.
When this
parameter is set to
ADAPTIVE: (1) If
the number of
required RBGs is
less than 1, the
actual number of
RBs are allocated
LBFD-
to UEs at the
002025/TDLBFD-
current TTI; (2) If
002025
the number of NO NO NO
LOFD-
required RBGs is
00101502/TDLOFD
greater than N but
-00101502
less than N+1 (N is
greater than or
equal to 1), RBs of
N+1 RBGs are
allocated to UEs in
the current TTI.
Compared with
setting this
parameter to
ROUND_UP,
setting this
parameter to
ADAPTIVE does
not waste RBs
when the number of
required RBGs is

Indicates the
maximum number
of downlink hybrid
LBFD-
automatic repeat
NO NO NO 002025/TDLBFD-
request (HARQ)
002025
transmissions. For
details, see 3GPP
TS 36.331.

Indicates the weight

for scheduling non-
GBR services with NO NO NO LOFD-070208
long scheduling
delay.
Indicates the
duration within
which the eNodeB
performs downlink
scheduling based
on a low modulation
and coding scheme
(MCS) order in
handovers. The
eNodeB starts this
timer after
determining a UE
has entered the
LBFD-002025 /
handover area or
TDLBFD-002025
has been handed NO NO NO
LOFD-00101502 /
over to the target
TDLOFD-00101502
cell. The eNodeB
performs downlink
scheduling based
on a low MCS order
during the running
of this timer. After
the timer expires,
the eNodeB
performs downlink
scheduling based
on a new MCS
order after CQI
adjustment.
Indicates whether
to perform downlink
rank optimization. If
this parameter is
set to OFF, the
eNodeB uses the
rank received from
a UE to schedule
the UE. If the
baseband
processing unit
determines that the
received rank is
unsuitable for UE
scheduling, the
LBFD-002025 /
eNodeB schedules
TDLBFD-002025
the UE based on
LOFD-00101502 /
rank 1. If this
TDLOFD-00101502
parameter is set to NO NO NO
LOFD-001060 /
ON, the eNodeB
TDLOFD-001060
optimizes the
LOFD-001001 /
received rank and
TDLOFD-001001
schedules the UE
based on the
optimized rank. If
the baseband
processing unit
determines that the
received rank is
unsuitable for UE
scheduling, the
eNodeB does not
optimize the
received rank and
schedules the UE
based on the rank
used last time.
Indicates the
method for
measuring the
Doppler frequency
offset that is applied
to frequency
selective
scheduling on the
secondary
component carrier
(SCC) in carrier
LAOFD-00100101 /
aggregation (CA). If
TDLAOFD-
this parameter is
00100101
set to FROMSCC,
LAOFD-00100102 /
the Doppler
TDLAOFD-
frequency offset on
00100102
the SCC is
LAOFD-00100201 /
measured. If this
TDLAOFD-001002
parameter is set to NO NO NO
LAOFD-00100202 /
FROMPCC, the
TDLAOFD-
Doppler frequency
00100102
offset on the
LAOFD-070201 /
primary component
TDLAOFD-070201
carrier (PCC) is
LAOFD-070202
measured no
TDLAOFD-
matter whether the
00100111
SCC is configured
with an uplink
carrier, and then the
Doppler frequency
offset is applied to
frequency selective
scheduling on the
SCC after
converting downlink
frequencies of the
PCC and SCC.
Indicates the semi-
persistent
scheduling period in
the downlink. This
parameter applies
only to LTE TDD
cells. In FDD mode,
the downlink semi-
persistent
scheduling period is
20 ms and cannot
be changed. If this
parameter is set to
NO NO NO TDLOFD-001016
ADAPTIVE, the
system adaptively
selects an uplink
semi-persistent
scheduling period
of 20 ms or 40 ms.
If this parameter is
set to ms20 or
ms40, the downlink
semi-persistent
scheduling period is
20 ms or 40 ms,
respectively.
within a
measurement
period: (1) this
parameter is set to
SINGLEUSER_ST
RATEGY; (2) the
service is the only
service to be
scheduled in the
cell; (3) the
proportion of the
transmission time
intervals (TTIs) in
which RBs are
expected to be
surplus is less than
a specified
threshold. If this LOFD-00101501 /
parameter is set to TDLOFD-00101501
NO NO NO
MULTIUSER_STRA LOFD-00101502 /
TEGY, the policy is TDLOFD-00101502
applied to the last
capability-limited
UE to be
scheduled. If this
parameter is set to
MULTIUSER_STRA
TEGY and the
proportion of TTIs in
which RBs are
expected to be
surplus is less than
a specified
threshold within a
measurement
period, this strategy
is applied to the last
UE to be
all UEs reporting
rank 1 if whitelisted
UEs have not been
configured. (2) The
eNodeB performs
rank 2 detection
only for whitelisted
UEs reporting rank
1 if whitelisted UEs
have been
configured. If the
DetectRank1AdjSwi
tch option is
deselected, the
eNodeB does not
perform rank 1
detection for UEs
reporting rank 2. In
TDLOFD-001001
this case, the
NO NO NO TDLOFD-001060
eNodeB performs
TDLOFD-001061
dual-codeword
scheduling. If the
DetectRank1AdjSwi
tch option is
selected, the
eNodeB performs
rank 1 detection for
UEs reporting rank
2. This version does
not support the
function controlled
by the
DetectRank1AdjSwi
tch option, and the
option setting does
not take effect. If
the
BfDetectRank1AdjS
Indicates whether
to configure
Multimedia
Broadcast multicast
service Single
Frequency Network
(MBSFN)
subframes. The ten
options of this
parameter map to
the ten MBSFN
subframes. If an
option is selected,
LAOFD-080210
the corresponding NO NO NO
LAOFD-080205
subframe is
configured. If an
option is not
selected, the
corresponding
subframe is not
configured. PDSCH
services with
enhanced MIMO
applied can be
scheduled on
configured MBSFN
subframes.

Indicates whether
the TDD special
subframes are used
for downlink
scheduling.
If the parameter is
LBFD-
set to SCH, TDD
002025/TDLBFD-
special subframes
002025
are used for NO NO NO
LOFD-
downlink
00101502/TDLOFD
scheduling.
-00101502
If the parameter is
set to NSCH, TDD
special subframes
are not used for
downlink
scheduling.
Indicates the traffic
volume threshold of
a bearer above
which the bearer is
determined as a
bearer with large
packets in the
PDCCH and
PDSCH resource
allocation
optimization
mechanism when
traffic is heavy. If
this parameter is
set to 0, none of the
bearers is
LOFD-00101502 /
determined as a NO NO NO
TDLOFD-00101502
bearer with large
packets. If this
parameter is set to
a value ranging
from 1 to 1000000
(indicating a
threshold from 1 bit
to 1,000,000 bits), a
bearer whose traffic
to be scheduled is
greater than or
equal to this
parameter value is
determined as a
bearer with large
packets.
Indicates the
threshold for the
number of
synchronized UEs
in a cell above
which the PDCCH
and PDSCH
resource allocation
optimization
mechanism is
activated in large
traffic volume
scenarios. If this LOFD-00101502 /
NO NO NO
parameter is set to TDLOFD-00101502
a value ranging
from 0 to 10000
(indicating a
threshold from 0 UE
to 10,000 UEs), the
mechanism is
activated when the
number of
synchronized UEs
in the cell is greater
than or equal to this
parameter value.
Indicates the
modular for
calculating the first
TDLBFD-070111
resource block (RB)
NO NO NO TDLOFD-070223
to be scheduled
LOFD-00101502
based on
interference
randomization.
Indicates whether
DCI1A downlink
grant scheduling is
used for UEs in
transmit diversity
mode. This
parameter applies
only to LTE TDD
cells. If this
parameter is set to
ON and the UE in
transmit diversity
mode requires TDLBFD-
single-codeword NO NO NO 002025/TDLOFD-
scheduling, the 001015
DCI1A format can
be used for
downlink grant
scheduling, which
increases the
DCI1A coverage
area. If this
parameter is set to
OFF, the downlink
grant scheduling is
performed in default
mode.
Indicates the
threshold of
consecutive
discontinuous
transmissions
LOFD-00101502 /
(DTXs) in the
TDLOFD-00101502
downlink above NO NO NO
LBFD-002025 /
which the eNodeB
TDLBFD-002025
stops scheduling
the abnormal UE.
The parameter
value range is from
6 to 120.
Indicates the code LBFD-
rate for Random 002011/TDLBFD-
Access Response NO NO NO 002011 LBFD-
messages and 002010/TDLBFD-
paging messages. 002010

Indicates the initial

step in which
channel quality
indicators (CQIs)
are adjusted for
UEs that initially
access or are
handed over to the
network. If the
NO NO NO LOFD-00101501
periodically
measured initial
block error rate
(IBLER) exceeds
the fixed IBLER
threshold, the CQI
adjustment step is
changed to its fixed
default value 0.1.
Indicates the
scheduling policy of
subframes
transmitting CSI-
RSs. This
parameter now
includes one
switch.
UnCfgCsiRsUESch
Switch: Indicates
whether UEs that
do not support CSI-
RSs can be
scheduled in
TDLAOFD-
subframes
NO NO NO 00100114
transmitting CSI-
TDLAOFD-081409
RSs. These UEs
can be scheduled in
these subframes
only when this
switch is on. UEs
that do not support
CSI-RSs refer to
the CSI-RSs that
cannot identify the
subframes
transmitting CSI-
RSs. This switch
applies only to LTE
TDD cells.
for measuring
downlink load of a
single frequency
network (SFN) cell.
The eNodeB
determines the
threshold for
isolating UEs
scheduled in
independent
scheduling mode
from UEs
scheduled in joint
scheduling mode
based on the
downlink cell load
measured within
each period. A
heavier cell load NO NO NO LOFD-070205
results in a lower
threshold and a
higher probability
that UEs enter
independent
scheduling mode. A
lighter cell load
results in a higher
threshold and a
higher probability
that UEs enter joint
scheduling mode.
This parameter
takes effect only
when the
SfnDlSchSwitch
parameter is set to
ADAPTIVE(Adaptiv
period for frequency
selective
scheduling. If
FreqSelSwitch of
the DlSchSwitch
parameter is off, the
FreqSelJudgePerio
d parameter setting
does not take
effect. If
FreqSelSwitch of
the DlSchSwitch
parameter is on, a
smaller value of the
FreqSelJudgePerio
d parameter results
that UEs meeting
frequency selective LBFD-060202,
scheduling TDLOFD-
NO NO NO
conditions more 00101502, LOFD-
easily enter the 00101502
frequency selective
scheduling mode
and a higher
probability that the
UEs repeatedly
enter and exit
frequency selective
scheduling mode. A
larger value of the
FreqSelJudgePerio
d parameter results
in the opposite
effects when
FreqSelSwitch of
the DlSchSwitch
parameter is on.
This parameter
scheduling on
VoLTE services in
the downlink. This
parameter includes
options related to
enhanced
scheduling
algorithms for
VoLTE services in
the downlink.
DlVoIPLoadBasedS
chSwitch: Indicates
whether to enable
cell-load-based
adaptive selection
of dynamic
scheduling and
semi-persistent
scheduling for UEs
NO NO NO TDLOFD-00101502
running VoLTE
services. If this
option is
deselected, cell-
load-based
adaptive selection
of dynamic and
semi-persistent
scheduling cannot
be performed for
UEs running VoLTE
services. If this
option is selected,
dynamic and semi-
persistent
scheduling can be
adaptively selected
for UEs running
VoLTE services
Indicates the
aperiodic channel
quality indicator
(CQI) reporting
period of a UE
adopting frequency
diversity (FD)
LBFD-
scheduling. This
060202/LBFD-
parameter can be
060202
set to 5ms, 10ms, NO NO NO
LOFD-
20ms, 40ms, 80ms,
00101502/LOFD-
160ms, and inf. The
00101502
parameter value inf
indicates that the
aperiodic CQI
reporting is not
triggered. This
parameter applies
only to LTE FDD.

Indicates the PRB

usage threshold
used to determine
TDLOFD-002008 /
the change from NO NO NO
LOFD-070205
low load to high
load in the
downlink.

Indicates the PRB

usage threshold
used to determine
TDLOFD-002008 /
the change from NO NO NO
LOFD-070205
high load to low
load in the
downlink.
Indicates the offset
to the high load
TDLOFD-002008 /
threshold in the NO NO NO
LOFD-070205
downlink of an
adaptive SFN cell.

Indicates whether
to enable the LBT
function. This
NO NO NO None
parameter applies
only to LTE TDD
cells.

Indicates the noise

interference
threshold for
disabling downlink
transmission. If the
noise interference
received by the
transmitter is NO NO NO None
greater than this
threshold, downlink
transmission is
disabled. This
parameter applies
only to LTE TDD
cells.

Indicates the noise

interference
threshold for
enabling downlink
transmission. If the
noise interference
received by the
transmitter is less NO NO NO None
than this threshold,
downlink
transmission is
enabled. This
parameter applies
only to LTE TDD
cells.

Indicates the
duration of LBT for
NO NO YES None
detecting noise
interference.
Indicates whether
downlink
transmission is
enabled. This NO NO YES None
parameter applies
only to LTE TDD
cells.

Indicates the noise

interference power
detected by LBT.
NO NO YES None
This parameter
applies only to LTE
TDD cells.
effect only if the
EnAperiodicCqiRpt
Switch option of the
DlSchSwitch
parameter is
selected. If the
EnAperiodicCqiTrig
Strategy parameter
is set to
CQI_PERIOD_BAS
ED(CQI_PERIOD_
BASED), aperiodic
CQI reporting is
triggered only if the
periodic CQI
reporting period is
greater than the
FDUEEnhAperCQI
TrigPeriod LOFD-00101502
NO NO NO
parameter value. If LBFD-002031
the
EnAperiodicCqiTrig
Strategy parameter
is set to
CQI_REPORTINTE
RVAL_BASED(CQI
_REPORTINTERVA
L_BASED),
aperiodic CQI
reporting is
triggered only if the
interval from the
latest CQI reporting
(either periodic or
aperiodic CQI
reporting) is greater
than the
FDUEEnhAperCQI
Indicates the policy
of allocating CA UE
capability in
downlink CA. The
allocation policies
include equal
allocation and
adaptive allocation.
If this parameter is
set to
EQUALLY_DIVIDE
D(EQUALLY_DIVID
ED), the eNodeB
equally allocates LOFD-00101502 /
CA UE capabilities NO NO NO TDLOFD-00101502
among all activated LBFD-070106
carriers. If this
parameter is set to
ADAPTIVELY_DIVI
DED(ADAPTIVELY
_DIVIDED), the
eNodeB adaptively
allocates CA UEs
capabilities among
all activated carriers
based on
bandwidths and the
number of transmit
ports.
Indicates whether
to enable functions
related to downlink
scheduling of CA
UEs.
DlCaUserRbPriMcs
SelSwitch:
Indicates whether
to enable the policy
of increasing the
number of RBs to
lower the MCS
index. If this option LOFD-00101502 /
is selected and the TDLOFD-00101502
CA UEs' traffic NO NO NO LBFD-070106
volume to be LOFD-00101501 /
transmitted is TDLOFD-00101501
greater than or
equal to the
allocated CA UE
capabilities in the
carrier, the policy
applies to CA UEs
that are not very
near the cell center.
If this option is
deselected, the
policy is not applied
to CA UEs.

Indicates the
adaptive handover
period of the CQI
table with the MCS
LBFD-002025 /
of 256QAM. This
TDLBFD-002025
parameter takes
LOFD-00101502 /
effect only when the NO NO NO
TDLOFD-00101502
Dl256QamCqiTblCf
LAOFD-090201 /
gStrategy
TDLAOFD-090201
parameter is set to
ADAPTIVE_CONFI
G(ADAPTIVE_CON
FIG).
configuration policy
of the CQI table
with the MCS of
256QAM. The
configuration
policies include
fixed policy and
adaptive policy.
If this parameter is
set to
FIX_CONFIG(FIX_
CONFIG), the CQI
table with the MCS
of 256QAM is
fixedly configured
for UEs supporting
256QAM in LBFD-002025 /
downlink TDLBFD-002025
scheduling. If this LOFD-00101502 /
NO NO NO
parameter is set to TDLOFD-00101502
ADAPTIVE_CONFI LAOFD-090201 /
G(ADAPTIVE_CON TDLAOFD-090201
FIG), the CQI
tables with MCSs of
256QAM or other
than 256QAM can
be adaptively
configured for UEs
supporting 256QAM
based on channel
quality in downlink
scheduling. This
parameter takes
effect only when the
Dl256QamSwitch
option of the
Dl256QamAlgoSwit
ch parameter is
Indicates the MCS
threshold less than
or equal to which
UEs' transmit power
can be increased to
get performance
gains. This
NO NO NO LOFD-090217
parameter applies
only to LTE FDD
and takes effect
only when the Cell
Coverage
Enhancement
feature is enabled.
Indicates whether
the Cell Coverage
Enhancement
feature is enabled
in a cell. The
parameter value
OFF(Off) indicates
that the Cell
Coverage
Enhancement
NO NO YES None
feature is disabled,
and the parameter
value ON(On)
indicates that the
Cell Coverage
Enhancement
feature is enabled.
This parameter
applies only to LTE
FDD.

Indicates the IBLER

threshold for
lowering the MCS
index and
reactivating
downlink semi-
persistent
scheduling. If the LOFD-
IBLER is greater NO NO NO 001016/TDLOFD-
than or equal to the 001016
specified threshold
in the measurement
period, the MCS
index is lowered
and semi-persistent
scheduling is
reactivated.
adjustment value
during downlink
AFC and better
performance
protection in
abnormal frequency
adjustment
scenarios. If the
value of this
parameter is
greater than the
Doppler frequency
offset
corresponding to
the specific train
speed, downlink
AFC does not
provide any
performance NO NO NO TDLOFD-001007
protection in the
abnormal
scenarios. It is
recommended that
this parameter be
set to a value
slightly smaller than
the Doppler
frequency offset
corresponding to
the maximum train
speed. For
example, when the
frequency band is
2.6 GHz, the
mapping between
the parameter value
and the train speed
Indicates the RSRP
filtering coefficient
for SRSs that are
used during
downlink AFC in
high-speed railway
scenarios. A larger
value of this
parameter leads to
a larger impact of
the RSRP value
measured this time
on the filtered
value. A smaller
value of this NO NO NO TDLOFD-001007
parameter leads to
a larger impact of
the previous RSRP
value on the filtered
value. The setting
of this parameter is
related to the train
speed. A larger
value can be set if
the train travels at a
higher speed. This
parameter applies
only to LTE TDD
networks.
CellCoverEnhance
Status parameter
value is OFF(Off),
this parameter
value is displayed.
The parameter
value
CELL_INST_UNIN
STALL(CELL_INST
_UNINSTALL)
indicates that the
cell is not
established. The
parameter value
SWITCH_OFF(SWI
TCH_OFF)
indicates that the
cell coverage
enhancement
NO NO YES None
switch is off. The
parameter value
NOT_ALLOWED_P
OWER(NOT_ALLO
WED_POWER)
indicates that the
RRU power is not
supported. The
parameter value
NOT_ALLOWED_B
OARD(NOT_ALLO
WED_BOARD)
indicates that the
board does not
support this feature.
The parameter
value
UNKNOWN(UNKN
OWN) indicates that
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
frequency load
balancing. If the
MlbTriggerMode
parameter is set to
PRB_ONLY(PrbMo
de) or
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode), inter-
frequency load
balancing is
triggered when the
number of
synchronized UEs
in the cell is greater
than or equal to the
sum of the
MlbMinUeNumThd
LOFD-001032 /
and NO NO NO
TDLOFD-001032
MlbMinUeNumOffs
et parameter values
and the PRB usage
of the cell is greater
than or equal to the
sum of the
InterFreqMlbThd
and LoadOffset
parameter values.
Load balancing
stops when the
PRB usage of the
cell or the number
of synchronized
UEs falls below the
value of the
InterFreqMlbThd
parameter or the
Indicates the
threshold of the
PRB usage for
triggering inter-RAT
load sharing. Inter-
RAT load sharing is
triggered if the
number of
synchronized UEs
in the cell is greater
than or equal to the
sum of the
InterRatMlbUeNum
Thd and
InterRatMlbUeNum
Offset parameter
values and the PRB LOFD-001044 /
usage of the cell is TDLOFD-001044
NO NO NO
greater than or LOFD-001045 /
equal to the TDLOFD-001045
InterRatMlbThd and
LoadOffset
parameter values.
Inter-RAT load
sharing stops if the
number of
synchronized UEs
in the cell is less
than the
InterRatMlbUeNum
Thd parameter
value or the PRB
usage of the cell is
less than the
InterRatMlbThd
parameter value.
and LoadOffset
parameter values.
Inter-frequency load
balancing is
triggered if the
number of
synchronized UEs
in the cell is greater
than or equal to the
sum of the
MlbMinUeNumThd
and
MlbMinUeNumOffs
et parameter values
and the PRB
valuation in the cell
is greater than or LOFD-001032 /
equal to the sum of TDLOFD-001032
the LOFD-001044 /
NO NO NO
PrbValMlbTrigThd TDLOFD-001044
and LoadOffset LOFD-001045 /
parameter values. TDLOFD-001045
Inter-RAT load
sharing is triggered
if the number of
synchronized UEs
in the cell is greater
than or equal to the
sum of the
InterRatMlbUeNum
Thd and
InterRatMlbUeNum
Offset parameter
values and the PRB
usage of the cell is
greater than or
equal to the
InterRatMlbThd and
Indicates the
threshold of PRB
usage difference
between the
serving cell and a
neighboring cell.
LOFD-001032 /
When the result of
TDLOFD-001032
the PRB usage of
LOFD-001044 /
the serving cell NO NO NO
TDLOFD-001044
minus that of a
LOFD-001045 /
neighboring cell is
TDLOFD-001045
greater than the
parameter value,
this neighboring cell
can be a target cell
for mobility load
balancing (MLB).
parameter values
and the number of
uplink synchronized
UEs in the cell is
greater than or
equal to the sum of
the
InterRatMlbUeNum
Thd and
InterRatMlbUeNum
Offset parameter
values. PRB-usage-
based inter-RAT
load sharing stops if
the number of
uplink synchronized
UEs in the cell is
LOFD-001044 /
less than the
TDLOFD-001044
InterRatMlbUeNum NO NO NO
LOFD-001045 /
Thd parameter
TDLOFD-001045
value or the PRB
usage of the cell is
less than the
InterRatMlbThd
parameter value.
The actual
threshold for the
number of uplink
synchronized UEs
equals the
percentage value of
this parameter
multiplied by 1000.
For example, the
GUI value of 1
indicates that the
threshold for the

Indicates the
standard valid
duration for load
sharing with
universal terrestrial
radio access
network (UTRAN)
for UEs in idle LOFD-001044 /
NO NO NO
mode. The actual TDLOFD-001044
duration increases
on the basis of a
standard valid
duration with the
increase of the
number of uplink-
synchronized UEs.
Indicates the
control factor for the
amount of a single
load transfer. The
value of this
parameter has an LOFD-001032 /
NO NO NO
impact on the TDLOFD-001032
efficiency of MLB
algorithm and the
algorithm to prevent
ping-pong load
transfer.

used as a UE
transfer condition;
the aim of MLB is to
achieve the same
number of UEs per
unit of bandwidth
between cells. If
this parameter is
set to
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode), the
combination of the
triggering variables,
UE transfer
conditions, and
MLB aims for the
values
UE_NUMBER_ONL LOFD-070215 /
NO NO NO
Y(UeNumMode) TDLOFD-070215
and
PRB_ONLY(PrbMo
de) are used.
In MLB without load
information
exchange, If this
parameter is set to
PRB_ONLY(PrbMo
de), PRB usage is
used as a triggering
variable and a UE
transfer condition
and the number of
UEs is used as a
supplementary
triggering variable
and a
supplementary UE
Indicates the
threshold of the
number of
synchronized UEs
for triggering inter-
frequency load
balancing. When
the MlbTriggerMode
parameter is set to
UE_NUMBER_ONL
Y(UeNumMode) or
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode), inter-
frequency load
balancing is
triggered if the
LOFD-070215 /
number of NO NO NO
TDLOFD-070215
synchronized UEs
in the cell is greater
than or equal to the
sum of the
InterFreqMlbUeNu
mThd and
MlbUeNumOffset
parameter values.
Inter-frequency load
balancing stops if
the number of
synchronized UEs
in the cell is less
than the
InterFreqMlbUeNu
mThd parameter
value.
Indicates the offset
of the number of
synchronized UEs
for triggering inter-
frequency load
balancing. User-
number-based
inter-frequency load
balancing is
triggered if the
number of
synchronized UEs
in the cell is greater
than or equal to the
sum of the
InterFreqMlbUeNu
mThd and LOFD-070215 /
NO NO NO
MlbUeNumOffset TDLOFD-070215
parameter values.
User-number-based
inter-frequency load
balancing to
transfer to-be-
released UEs is
triggered if the
number of
synchronized UEs
in the cell is greater
than or equal to the
sum of the
InterFreqIdleMlbUe
NumThd and
MlbUeNumOffset
parameter values.
Indicates the
maximum number
of UEs that can be
transferred to inter-
frequency
neighboring cells
within a load
balancing period
triggered by
different factors.
This parameter is
used to prevent too LOFD-070215 /
NO NO NO
many UEs from TDLOFD-070215
being transferred to
inter-frequency
neighboring cells
within a load
balancing
procedure and the
load in inter-
frequency
neighboring cells
from increasing
significantly.
greater than this
parameter value but
the PRB usage in
the opposite
direction that
triggers MLB is less
than this parameter
value. (2) If the
MlbTriggerMode
parameter is set to
UE_NUMBER_ONL
Y(UeNumMode)
and the value of
this parameter is
set to 100, the
eNodeB selects
UEs without
considering the UE
PRB usage. If the LOFD-070215 /
NO NO NO
value of this TDLOFD-070215
parameter is not set
to 100, the eNodeB
selects UEs whose
PRB usage is less
than or equal to this
parameter value.
(3) If the
MlbTriggerMode
parameter is set to
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode) and the MLB
procedure is
triggered by the
PRB usage, the
eNodeB selects
UEs for MLB in the
same way as that
Indicates the MLB
mode for downlink
data transfer. If this
parameter is set to
UeNumBased, the
downlink data
transfer MLB
algorithm is
enabled. If this LOFD-001032 /
NO NO NO
parameter is set to TDLOFD-001032
NON_TRIGGERED
, the downlink data
transfer MLB
algorithm is
disabled.
This parameter is
dedicated to LTE
TDD cells.
level and operator-
group-level inter-
frequency MLB. If
this parameter is
set to
SHARING(SHARIN
G), operator-level
inter-frequency
MLB is enabled and
the eNodeB
performs inter-
frequency MLB
based on the
reserved resources
of each operator in
RAN sharing mode.
If this parameter is
set to
NON_SHARING(N LOFD-070204 /
NO NO NO
ON_SHARING), the TDLOFD-070204
eNodeB performs
MLB without
distinguishing
operators and
performs cell-level
inter-frequency
MLB. If this
parameter is set to
OVERSHARING(O
VERSHARING), the
eNodeB performs
operator-level inter-
frequency MLB
based on the cell
load and the
operator's load in
RAN sharing mode.
This parameter
Indicates the
proportion threshold
for determining
whether a
neighboring cell can
be a target cell in
load balancing.
Providing that the
number of
synchronized UEs
in the serving cell is
value "A" and that
in a neighboring cell
LOFD-070215 /
is value "B", the NO NO NO
TDLOFD-070215
proportion threshold
is calculated by "A"
dividing the value of
"A" minus "B". If a
calculated
proportion is
greater than this
parameter value,
the neighboring cell
involved in the
calculation can be a
target cell in load
balancing.

Indicates whether
the inter-RAT MLB
LOFD-001044 /
to UTRAN is NO NO NO
TDLOFD-001044
performed only on
UEs in hotspots.
Indicates the inter-
frequency load
balancing mode for
UEs in idle mode. If
the Proportion
check box under
this parameter is
selected, the
eNodeB transfers
normally released
UEs to frequencies
LOFD-
based on the preset
NO NO NO 001032/TDLOFD-
proportions for
001032
neighboring
frequencies of the
serving frequency
so that load
balancing for UEs
in idle mode is
achieved. This
parameter is valid
only when the
Proportion check
box is selected.
for triggering inter-
frequency load
balancing. When
the MlbTriggerMode
parameter is set to
PRB_ONLY(PrbMo
de) or
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode), load
balancing is
triggered if the PRB
usage of the cell is
greater than or
equal to the sum of
InterFreqMlbThd
and LoadOffset
parameter values
LOFD-001032 /
and the number of NO NO NO
TDLOFD-001032
synchronized UEs
in the cell is greater
than or equal to the
sum of the
MlbMinUeNumThd
and
MlbMinUeNumOffs
et parameter
values. Load
balancing stops
when the PRB
usage of the cell or
the number of
synchronized UEs
falls below the
value of the
InterFreqMlbThd
parameter or the
Indicates the offset
of the minimum
number of
synchronized UEs
for triggering inter-
frequency load
balancing. If the
MlbTriggerMode
parameter is set to
PRB_ONLY(PrbMo
de) or
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode), inter-
frequency load
balancing is
LOFD-001032 /
triggered when the NO NO NO
TDLOFD-001032
number of
synchronized UEs
in the cell is greater
than or equal to the
sum of the
MlbMinUeNumThd
and
MlbMinUeNumOffs
et parameter values
and the PRB usage
of the cell is greater
than or equal to the
sum the
InterFreqMlbThd
and LoadOffset
parameter values.
check box is
selected,synchroniz
ed UEs are
transferred for inter-
frequency user-
number-based load
balancing.If the
IdleUE check box is
selected, UEs in
idle mode are
transferred for inter-
frequency user-
number-based load
balancing.If the
PrbMlbSynchronize
dUE check box is
selected,
synchronized UEs
are transferred for LOFD-070215 /
NO NO NO
inter-frequency TDLOFD-070215
PRB-based load
balancing.This
parameter is
dedicated to LTE
TDD cells.If the
PrbMlbIdleUE
check box is
selected, UEs in
idle mode are
transferred for inter-
frequency PRB-
based load
balancing.This
parameter is
dedicated to LTE
TDD cells.If multiple
check boxes are
selected, multiple
number of
synchronized UEs
for triggering inter-
frequency load
balancing to
transfer to-be-
released UEs.
When the
MlbTriggerMode
parameter is set to
UE_NUMBER_ONL
Y(UeNumMode) or
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode), inter-
frequency load
balancing to
transfer to-be-
released UEs is LOFD-070215 /
NO NO NO
triggered if the TDLOFD-070215
number of
synchronized UEs
in the cell is greater
than or equal to the
sum of the
InterFreqIdleMlbUe
NumThd and
MlbUeNumOffset
parameter values.
Inter-frequency load
balancing to
transfer to-be-
released UEs stops
if the number of
synchronized UEs
in the cell is less
than the
InterFreqIdleMlbUe
number of
synchronized UEs
for triggering inter-
RAT load sharing to
transfer to-be-
released UEs. Inter-
RAT load sharing to
transfer to-be-
released UEs is
triggered if the
number of
synchronized UEs
is greater than or
equal to the sum of
the
InterRATIdleMlbUe
LOFD-
NumThd and
001044/TDLOFD-
InterRatMlbUeNum
001044
Offset parameter NO NO NO
LOFD-
values and the PRB
001045/TDLOFD-
usage of the cell is
001045
greater than or
equal to the sum of
the InterRatMlbThd
and LoadOffset
parameter values.
Inter-RAT load
sharing to transfer
to-be-released UEs
stops if the number
of synchronized
UEs is less than the
InterRATIdleMlbUe
NumThd parameter
value or the PRB
usage of the cell is
less than of the
state within an
evaluation period,
inter-frequency load
balancing is
triggered and
certain UEs are
transferred for load
balancing. If the
UtranMlbSwitch or
GeranMlbSwitch
option of the
MlbAlgoSwitch
parameter is
selected, the
InterFreqMlbSwitch
or
InterFreqBlindMlbS
witch option of the
LOFD-070215 /
MlbAlgoSwitch NO NO NO
TDLOFD-070215
parameter is
selected, and the
FreqSelectStrategy
parameter is set to
PRIORITYBASED(
PriorityBased), the
values of the
InterRatLoadEvalPr
d and
InterFreqLoadEvalP
rd parameters must
be the same. If the
two parameters are
set to different
values, the
evaluation period
specified by the
InterRatLoadEvalPr
state within an
evaluation period,
inter-RAT load
sharing is triggered
and certain UEs are
transferred to an
inter-RAT
neighboring cell. If
the UtranMlbSwitch
or GeranMlbSwitch
option of the
MlbAlgoSwitch
parameter is
selected, the
InterFreqMlbSwitch
or
InterFreqBlindMlbS
LOFD-001044 /
witch option of the
TDLOFD-001044
MlbAlgoSwitch NO NO NO
LOFD-001045 /
parameter is
TDLOFD-001045
selected, and the
FreqSelectStrategy
parameter is set to
PRIORITYBASED(
PriorityBased), the
values of the
InterRatLoadEvalPr
d and
InterFreqLoadEvalP
rd parameters must
be the same. If the
two parameters are
set to different
values, the
evaluation period
specified by the
InterRatLoadEvalPr
sharing, and a
maximum of three
frequencies among
all neighboring
frequencies of
candidate cells are
randomly selected
as the target
frequencies in inter-
frequency load
balancing by
transferring UEs
with low spectral
efficiency.
If this parameter is
set to
PRIORITYBASED(
PriorityBased), the
LOFD-070215 /
frequency with the NO NO NO
TDLOFD-070215
highest priority
among all intra-RAT
neighboring
frequencies and the
frequency with the
highest priority
among all inter-RAT
frequencies are
selected as target
frequencies
separately when
inter-frequency load
balancing and inter-
RAT load sharing
are triggered
separately or both
operator-level inter-
frequency load
MlbAlgoSwitch
parameter is not
selected, and the
InterFreqBlindMlbS
witch option of the
MlbAlgoSwitch
parameter is
selected, the
serving cell selects
certain inter-
eNodeB inter-
frequency
neighboring cells as
candidate cells for
inter-frequency load
balancing. If this
parameter is set to
ADAPTIVE(Adaptiv
LOFD-070215 /
e), the NO NO NO
TDLOFD-070215
InterFreqMlbSwitch
option of the
MlbAlgoSwitch
parameter is
selected, and the
InterFreqBlindMlbS
witch option of the
MlbAlgoSwitch
parameter is
selected, the
serving cell selects
certain intra-
eNodeB inter-
frequency
neighboring cells as
candidate cells for
inter-frequency load
balancing when the
the PRB usage of
the cell is greater
than or equal to the
sum of the
InterRatMlbThd and
LoadOffset
parameter values
and the number of
uplink synchronized
UEs in the cell is
greater than or
equal to the sum of
the
InterRatMlbUeNum
Thd and
InterRatMlbUeNum
Offset parameter
values, PRB-usage- LOFD-001044 /
based inter-RAT TDLOFD-001044
NO NO NO
load sharing is LOFD-001045 /
triggered if the TDLOFD-001045
InterRatMlbTrigger
Mode parameter is
set to
IRAT_PRB_ONLY.
When the number
of uplink
synchronized UEs
in the cell is greater
than or equal to the
sum of the
InterRatMlbUeNum
ModeThd and
InterRatMlbUeNum
Offset parameter
values, UE-number-
based inter-RAT
load sharing is
Indicates the
frequency selection
policy for inter-
frequency MLB by
transferring
RRC_IDLE UEs. If
this parameter is
set to
LOADINFOFREQ(L
OADINFOFREQ),
only neighboring E-
UTRAN frequencies
whose load status
has been obtained
can be selected as
target frequencies.
NO NO NO TDLOFD-070215
If this parameter is
set to
ALLFREQ(ALLFRE
Q), all neighboring
E-UTRAN
frequencies can be
selected as target
frequencies,
regardless of
whether load
information about
the frequencies has
been obtained. This
parameter applies
only to LTE TDD
cells.
Indicates the
strategy for
selecting UEs in
inter-RAT MLB
triggered by the
PRB usage. If this
parameter is set to
PRBRATIOHIGHM
ODE(PRBRATIOHI
GHMODE), the
eNodeB transfers
UEs whose PRB
usage is greater
LOFD-001044 /
than 2% but less
TDLOFD-001044
than half of the NO NO NO
LOFD-001045 /
LoadDiffThd
TDLOFD-001045
parameter value. If
this parameter is
set to
PRBRATIOLOWMO
DE(PRBRATIOLO
WMODE), the
eNodeB transfers
UEs whose PRB
usage is less than
or equal to the
InterRatMlbUeSelPr
bThd parameter
value.
Indicates the PRB
usage threshold for
selecting UEs in
inter-RAT load
sharing. If the
InterRatMlbTrigger
Mode parameter is
set to
IRAT_PRB_ONLY
and the
InterRatMlbUeSelSt
rategy parameter is
set to
PRBRATIOLOWMO
DE, UEs whose
PRB usage is less
than or equal to the
LOFD-001044 /
InterRatMlbUeSelPr
TDLOFD-001044
bThd parameter NO NO NO
LOFD-001045 /
value are selected
TDLOFD-001045
for PRB-usage-
based inter-RAT
load sharing. If the
InterRatMlbTrigger
Mode parameter is
set to
IRAT_UE_NUMBE
R_ONLY, UEs
whose PRB usage
is less than or equal
to the
InterRatMlbUeSelPr
bThd parameter
value are selected
for UE-number-
based inter-RAT
load sharing.
BER. The
parameter value
PRB_USAGE
indicates that the
PRB load is
calculated based on
the PRB usage.
The parameter
value
PRB_VALUATION_
WITH_CTRL
indicates that the
PRB load is
calculated based on
the PRB evaluation
for traffic channels
and control
channels. The
parameter value
NO NO NO TDLOFD-001032
PRB_VALUATION_
NO_CTRL indicates
that the PRB load is
calculated based on
the PRB evaluation
only for traffic
channels. If this
parameter is set to
PRB_USAGE, the
PRB usage of
multiple cells is
more likely to reach
the maximum. If this
parameter is set to
PRB_VALUATION_
WITH_CTRL or
PRB_VALUATION_
NO_CTRL, the
transmission rate of
Indicates the length
of the timer for
punishing UEs that
are selected for
MLB but fail to be LOFD-001032 /
NO NO NO
transferred to target TDLOFD-001032
cells. Before the
timer expires, the
UEs cannot be
transferred for MLB.
allowed to initiate a
handover to one of
the secondary
strongest
neighboring cells
when the eNodeB
cannot initiate a
handover to the
strongest
neighboring cell
triggered by load-
information-
exchange-based
inter-frequency load
balancing.
If this parameter is
set to
LOFD-001032 /
PERMIT_NON_ST
TDLOFD-001032
RONGEST_CELL( NO NO NO
LOFD-070215 /
Permit Trying Non-
TDLOFD-070215
Strongest Cell), the
eNodeB is allowed
to initiate a
handover to one of
the secondary
strongest
neighboring cells in
the preceding
scenario. If this
parameter is set to
ONLY_STRONGES
T_CELL(Only Try
Strongest Cell), the
eNodeB can only
initiate a handover
to the strongest
neighboring cell in
UEs. If the PRB
usage of the cell is
greater than or
equal to the sum of
the InterRatMlbThd
and LoadOffset
parameter values
and the number of
uplink synchronized
UEs in the cell is
greater than or
equal to the sum of
the
InterRatMlbUeNum
Thd and
InterRatMlbUeNum
Offset parameter
values, PRB-usage- LOFD-001044 /
based inter-RAT TDLOFD-001044
NO NO NO
load sharing is LOFD-001045 /
triggered. If this TDLOFD-001045
parameter is set to
IRAT_UE_NUMBE
R_ONLY, inter-RAT
load sharing is
triggered only
based on the
number of UEs. If
the number of
uplink synchronized
UEs in the cell is
greater than or
equal to the sum of
the
InterRatMlbUeNum
ModeThd and
InterRatMlbUeNum
Offset parameter
in the cell used to
trigger UE-number-
based inter-RAT
load sharing. If the
number of uplink
synchronized UEs
in the cell is greater
than or equal to the
sum of the
InterRatMlbUeNum
ModeThd and
InterRatMlbUeNum
Offset parameter
values, UE-number-
based inter-RAT
load sharing is
triggered. If the
number of uplink LOFD-001044 /
synchronized UEs TDLOFD-001044
NO NO NO
in the cell is less LOFD-001045 /
than the TDLOFD-001045
InterRatMlbUeNum
ModeThd
parameter value,
UE-number-based
inter-RAT load
sharing stops. If the
InterRatMlbTrigger
Mode parameter is
set to
IRAT_PRB_OR_UE
_NUMBER, it is
recommended that
the
InterRatMlbUeNum
ModeThd
parameter be set to
a value equal to or

Indicates the
LOFD-001032 /
number of load
TDLOFD-001032
balancing periods
LOFD-070215 /
used to determine NO NO NO
TDLOFD-070215
whether to punish a
LOFD-001044 /
frequency during
TDLOFD-001044
load balancing.
Indicates the
number of MLB
punishment periods LOFD-001032 /
for a frequency TDLOFD-001032
during which cells LOFD-070215 /
NO NO NO
operating on this TDLOFD-070215
frequency cannot LOFD-001044 /
be selected as TDLOFD-001044
target cells in load
balancing.

Indicates the
number of MLB LOFD-001032 /
punishment periods TDLOFD-001032
for a cell during LOFD-070215 /
NO NO NO
which the cell TDLOFD-070215
cannot be selected LOFD-001044 /
as the target cell in TDLOFD-001044
load balancing.

Indicates the RRU-

specific load
calculation mode
for load balancing
in a multi-RRU cell.
This parameter
applies only to LTE
TDD cells.
When the
PrbUsage check
box is selected,
RRU-specific load
NO NO NO TDLOFD-081210
calculation mode
for load balancing
in a multi-RRU cell
is used.
When the
PrbUsage check
box is deselected,
RRU-specific load
calculation mode
for load balancing
in a multi-RRU cell
is not used.
inter-frequency load
balancing. Consider
that the
MlbTriggerMode
parameter is set to
PRB_ONLY(PrbMo
de) or
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode). If the PRB
usage in the source
cell is greater than
or equal to the sum
of the
InterFreqMlbThd
parameter value
and the
InterFreqOffloadOff
LOFD-001032 /
set parameter
NO NO NO TDLOFD-001032
value, neighboring
LOFD-070204
cells with which the
source cell does not
exchange load
information can be
selected as the
target cells for load
balancing, and the
source cell cannot
be selected as a
target cell for load
balancing. If the
PRB usage in the
source cell is less
than the value
calculated by the
InterFreqMlbThd
parameter value
plus the
that the
MlbTriggerMode
parameter is set to
UE_NUMBER_ONL
Y(UeNumMode) or
PRB_OR_UE_NUM
BER(PrbOrUeNum
Mode). If the
number of UL-
synchronized UEs
in the source cell is
greater than or
equal to the sum of
the
InterFreqMlbUeNu
mThd parameter
value and the
InterFrqUeNumOffl
LOFD-001032 /
oadOffset
NO NO NO TDLOFD-001032
parameter value,
LOFD-070204
neighboring cells
with which the
source cell does not
exchange load
information can be
selected as the
target cells for load
balancing, and the
source cell cannot
be selected as a
target cell for load
balancing. If the
number of UL-
synchronized UEs
in the source cell is
less than the value
calculated by the
InterFreqMlbUeNu
Indicates the scale
factor used to
determine the load
balancing capability
of a cell. This factor
helps adjust the
load balancing
target in UE-
number-based load
balancing. The load
balancing capability
of a cell equals the LOFD-070215 /
value calculated by NO NO NO TDLOFD-070215
the cell bandwidth LOFD-070204
(number of RBs)
multiplied by the
CellCapacityScaleF
actor parameter
value. Load
balancing with this
parameter taken
effect aims to
achieve even loads
in each cell with the
same bandwidth.
Indicates the
maximum number
of UEs that can be
transferred within
an execution period
of PRB-usage- or
user-number-based
inter-RAT MLB. This
parameter is used LOFD-001044 /
to prevent TDLOFD-001044
NO NO NO
excessive UEs from LOFD-001045 /
being transferred to TDLOFD-001045
inter-RAT
neighboring cells
within an MLB
procedure and the
load in inter-RAT
neighboring cells
from increasing
significantly.
Indicates whether
to impose penalty
on the target cell
when a handover
triggered by inter-
RAT MLB fails.
When this
parameter is set to
YES, the eNodeB
imposes penalty on
the target cell to
which the load- LOFD-001044 /
based handover TDLOFD-001044
NO NO NO
fails. The cell LOFD-001045 /
penalty period is TDLOFD-001045
determined by the
CellPunishPrdNum
parameter. When
this parameter is
set to NO, the
eNodeB does not
impose penalty on
the target cell to
which the load-
based handover
fails.
eNodeB to
determine the cell
load status when a
UTRAN cell
requests the load
status of an E-
UTRAN cell. If the
parameter is set to
L2UMLBTRIGGER
STATUS(L2UMLBT
RIGGERSTATUS),
the eNodeB
determines the cell
load status based
on the trigger
conditions of MLB
to UTRAN by UL-
sync UEs. If the
parameter is set to NO NO NO LOFD-070203
INTERRATMLBUE
NUMTHD(INTERRA
TMLBUENUMTHD)
, the eNodeB
determines the cell
load status based
on the number of
uplink-synchronized
UEs in a cell and
the value of the
Inter-RAT Mobility
Load Balancing UE
Number Threshold
parameter. This
parameter applies
only to LTE FDD
and takes effect
only if the

Indicates the
determination
period used for
triggering or
stopping MLB. If the
cell load is greater
than or equal to the
MLB triggering
threshold for a
consecutive period
specified by this
parameter, MLB is NO NO NO TDLOFD-001032
triggered.
If the cell load is
less than the MLB
stopping threshold
for a consecutive
period specified by
this parameter, MLB
is stopped. This
parameter applies
only to LTE TDD
cells.
Indicates the inter-
frequency MLB
strategy.
WEIGHTEDUENU
M: If this option is
selected, the
number of
synchronized UEs
for MLB is
LOFD-
calculated from the
001032/TDLOFD-
sum of the value of
NO NO NO 001032
the
LOFD-070215 /
DlschPriorityFactor
TDLOFD-070215
parameter
configured for each
synchronized UE. If
this option is
deselected, the
actual number of
synchronized UEs
is calculated for
MLB.

Indicates the local

ID of a cell, which
uniquely identifies YES YES NO None
the cell within an
eNodeB.
Indicates the
threshold for setting
the overlap
indicator. The
eNodeB compares
the measured
proportion of
coverage overlap
between the
serving cell and
each inter-
frequency
neighboring cell
with this threshold.
If the proportion for
an inter-frequency
neighboring cell NO NO NO LOFD-110219
exceeds or equals
this threshold, the
eNodeB sets the
overlap indicator for
the neighboring
cell.
A smaller value of
this parameter
indicates a lower
coverage overlap
requirement for
setting the overlap
indicator. A larger
value of this
parameter results in
the opposite effect.
Indicates the
threshold for
clearing the overlap
indicator. The
eNodeB compares
the measured
proportion of
coverage overlap
between the
serving cell and
each inter-
frequency
neighboring cell
with this threshold.
If the overlap
indicator has been
set for an inter-
NO NO NO LOFD-110219
frequency
neighboring cell
and the proportion
for the cell is less
than the threshold,
the eNodeB clears
the overlap
indicator for the
cell.
A smaller value of
this parameter
results in a lower
probability of
clearing the overlap
indicator. A larger
value results in a
higher probability.
measurement
period for automatic
grouping for MLB. If
the number of
samples collected
in the first period
meets the
requirement, the
eNodeB calculates
the coverage
overlap proportion
and sets or clears
overlap indicators
within the period. If
the number of
samples collected
in the first period
does not meet the
requirement, the
NO NO NO LOFD-110219
eNodeB extends a
second period and
performs
accumulated
statistics collection.
To ensure the work
efficiency of the
algorithm, the
eNodeB extends
only one period for
sample counting.
A shorter
measurement
period results in
faster setting or
clearing of overlap
indicators. A longer
measurement
period results in the

Indicates the sleep

period after one
round of statistics
collection and
configuration for
automatic grouping
for MLB. Automatic
grouping for MLB is
NO NO NO LOFD-110219
not working within
the sleep period.
The function
resumes after the
sleep period if the
network topology
changes during the
sleep period.
in the planned
period are
insufficient for
automatic grouping.
An additional
measurement can
be performed to
increase the
number of samples
if the samples are
not sufficient during
the planned period
when automatic
grouping for MLB is
working.
If this parameter is
set to
ALLOWED(ALLOW
ED), an additional NO NO NO LOFD-110219
measurement is
allowed during the
automatically
extended
measurement
period if the number
of samples does
not meet the
requirement during
the first period. If
this parameter is
set to
NOT_ALLOWED(N
OT_ALLOWED), no
additional
measurement is
allowed during the
automatically

Indicates the
minimum required
number of A4 and
A5 measurement
report samples for
starting automatic
grouping for MLB LOFD-001032 /
NO NO NO
on a network. The TDLOFD-001032
eNodeB determines
whether to start
automatic grouping
for MLB based on
the number of
samples.
Indicates the
working mode of
automatic grouping
for MLB.
If this parameter is
set to
FREE(FREE), the
eNodeB
automatically sets
or clears the
overlap indicator
without manual
NO NO NO LOFD-110219
configuration. If this
parameter is set to
CONTROLLED(CO
NTROLLED), the
eNodeB reports the
advice on setting or
clearing the overlap
indicator to the
U2000. The advice
takes effect only
upon manual
confirmation.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
quality indicator
(CQI) adjustment
for UEs running
unlimited voice
services. When this
option is selected,
the optimization is
enabled,
accelerating the
convergence pace
of initial block error
rate (IBLER) of
voice packets. The
eNodeB optimizes
downlink CQI
adjustment for UEs
running unlimited
voice services only
if this option is
NO NO NO None
selected.
UsCellNotDriveNsS
witch: Indicates
whether to enable
frequency steering
for UEs running
normal services in a
cell that serves UEs
running unlimited
services. The
eNodeB performs
frequency steering
for UEs running
normal services in a
cell that serves UEs
running unlimited
services only if this
option is selected.
NsRbRestrictSwitch
Indicates the
minimum interval
between two
preallocations for
UEs running
unlimited voice
services. When the
discontinuous
reception (DRX) NO NO NO None
algorithm switch is
on and the UE is in
the DRX state, the
actual value of this
parameter does not
exceed the
DrxInactivityTimer
parameter value.
Indicates the
minimum interval
between two
preallocations for
UEs running
unlimited data
services. When the
discontinuous
reception (DRX) NO NO NO None
algorithm switch is
on and the UE is in
the DRX state, the
actual value of this
parameter does not
exceed the
DrxInactivityTimer
parameter value.

Indicates the
amount of data
preallocated to a
NO NO NO None
UE running
unlimited voice
services.

Indicates the
amount of data
preallocated to a
NO NO NO None
UE running
unlimited data
services.
Indicates the
duration of each
smart preallocation
NO NO NO None
for a UE running
unlimited voice
services.

Indicates the
duration of each
smart preallocation
NO NO NO None
for a UE running
unlimited data
services.
Indicates the uplink
target initial block
error rate (IBLER)
NO NO NO None
of UEs running
unlimited voice
services.

Indicates the
minimum number of
UEs running normal
services that is
used in steering
mobility
management for NO NO NO None
such UEs when
steering mobility
management for
UEs running
unlimited services is
enabled.

Indicates the offset

of the target signal
to interference plus
noise ratio (SINR)
on the PUCCH for
UEs running
NO NO NO None
unlimited services
relative to the target
SINR on the
PUCCH for UEs
running normal
services.
Indicates the offset
of the reference
signal received
power (RSRP)
upper limit on the
PUCCH for UEs
NO NO NO None
running unlimited
services to the
RSRP upper limit
on the PUCCH for
UEs running normal
services.

Indicates the ID of
the intra-RAT
frequency priority
NO NO NO None
group for UEs
running unlimited
data services.

Indicates the
duration of service
guarantee for UEs
running unlimited
services during UE
steering when NO NO NO None
steering mobility
management for
UEs running
unlimited services is
enabled.

Indicates the
interval at which the
eNodeB triggers the
A4-related
measurement for a
NO NO NO None
UE running
unlimited services
during inter-
frequency
handovers.
Indicates the
reference signal
received power
(RSRP) threshold
for event A2 that
triggers coverage-
based inter-
frequency
handovers for UEs
running unlimited
services. If the NO NO NO None
measured RSRP
value is less than
this parameter
value, such a UE
sends a
measurement
report. This
parameter applies
only to LTE FDD
cells.
Indicates the
reference signal
received quality
(RSRQ) threshold
for event A2 that
triggers coverage-
based inter-
frequency
handovers for UEs
running unlimited
services. If the NO NO NO None
measured RSRQ
value is less than
this parameter
value, such a UE
sends a
measurement
report. This
parameter applies
only to LTE FDD
cells.
Indicates the ID of
the intra-RAT
frequency priority
NO NO NO None
group for UEs
running unlimited
voice services.

Indicates the ID of
an intra-RAT
frequency priority
group for UEs NO NO NO None
running normal
services in the
connected mode.
Indicates the PA
value allocated to
UEs running
unlimited services
when the PDSCH
power assignment
is even. If this
parameter is set to
NO NO NO None
a value less than
the PA value that is
allocated to UEs
when the PDSCH
power assignment
is even, this
parameter does not
take effect.

Indicates the offset

of the signal to
interference plus
noise ratio (SINR)
upper limit on the
PUSCH for UEs
NO NO NO None
running unlimited
services to the
SINR upper limit on
the PUSCH for UEs
running normal
services.
Indicates the
proportion of
resource blocks
(RBs) that UEs NO NO NO None
running normal
services can use in
a cell.

Indicates the length

of timer for
detecting UEs NO NO NO None
running unlimited
services.
Indicates the
downlink minimum
guaranteed bit rate
of the non-GBR
service for VIP
users. A large value
of this parameter
increases the
downlink service
scheduling priority
for VIP users and
the service rate is
more likely to be
guaranteed. A small
NO NO NO None
value of this
parameter
decreases the
downlink service
scheduling priority
for VIP users and
the service rate is
less likely to be
guaranteed. This
parameter does not
take effect if it is set
to 0. This parameter
applies only to LTE
TDD cells.
Indicates the uplink
minimum
guaranteed bit rate
of the non-GBR
service for VIP
users. A large value
of this parameter
increases the uplink
service scheduling
priority for VIP
users and the
service rate is more
likely to be
guaranteed. A small
NO NO NO None
value of this
parameter
decreases the
uplink service
scheduling priority
for VIP users and
the service rate is
less likely to be
guaranteed. This
parameter does not
take effect if it is set
to 0. This parameter
applies only to LTE
TDD cells.

Indicates the
interference
suppression
threshold in an
intra-frequency
NO NO NO None
neighboring cell of
the local cell
serving UEs
running unlimited
services.
Indicates the start
position of the
reserved RB for
UEs running NO NO NO None
unlimited voice
services in the
uplink.
Indicates the end
position of the
reserved RB for
UEs running NO NO NO None
unlimited voice
services in the
uplink.

Indicates the PRB

threshold for
intelligent subframe
control. The
eNodeB selects
different subframes
for intelligent
NO NO NO None
control based on
the PRB thresholds
for intelligent
subframe control.
This parameter
applies only to LTE
FDD.

Indicates the period

of reserving the
voice indicator for a
UE running
unlimited services
after a voice service
ends. If this
NO NO NO None
parameter is set to
65535, the voice
attribute is always
reserved for a UE
running unlimited
services after a
voice service ends.
Indicates the ID of
an intra-RAT
frequency priority
group for UEs
running normal
services in the idle
mode. If the
UsCellReselSwitch
option of the
UsAlgoSwitch
parameter is
selected, the
NsIdleRatFreqPriGr
oupId parameter
NO NO NO None
setting is delivered
to steer UEs
running normal
services to camp on
frequencies of
different priorities. If
the
UsCellReselSwitch
option is
deselected, the
NsIdleRatFreqPriGr
oupId parameter
does not take
effect.

Indicates the
proportion of the
duration that the
downlink
scheduling weight
factor takes effect
for UEs running
unlimited services.
If this parameter is
set to 1000, the
downlink
scheduling weight
NO NO NO None
factor always takes
effect for UEs
running unlimited
services. If this
parameter is set to
0, the downlink
scheduling weight
factor does not take
effect for UEs
running unlimited
services all the
time.
Indicates the
proportion of the
duration that the
uplink scheduling
weight factor takes
effect for large-
packet UEs running
unlimited services.
If this parameter is
set to 1000, the
uplink scheduling
weight factor
NO NO NO None
always takes effect
for large-packet
UEs running
unlimited services.
If this parameter is
set to 0, the uplink
scheduling weight
factor does not take
effect for large-
packet UEs running
unlimited services
all the time.

Indicates the Local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the CCE

aggregation level LBFD-002003 /
NO NO NO
for common TDLBFD-002003
signaling.
Indicates the CCE
ratio adjustment
switch for the
PDCCH. If this
switch is turned on,
the resource
allocation algorithm
of the PDCCH
dynamically adjusts
the UL and DL CCE LBFD-002003 /
NO NO NO
ratios within each TDLBFD-002003
transmission time
interval (TTI) based
on CCE usages in
UL and DL. If this
switch is turned off,
the UL and DL CCE
ratios are not
dynamically
adjusted.

Indicates the
threshold of
isolation for
determining
whether to enable
PDCCH selective
transmission in
adaptive
SFN/SDMA
scenarios. For a
UE, if the ratio
between the RSRP
of strong signals
NO NO NO TDLOFD-002008
and that of weak
signals from
multiple RRUs in an
SFN cell is greater
than or equal to the
value of this
parameter, the
power of weak
signals is not
transmitted. This
parameter applies
only to LTE TDD
cells.
PDCCH. For LTE
TDD cells, this
parameter indicates
the number of
OFDM symbols
initially occupied by
PDCCH where only
the downlink
scheduling and
controlling
information is
transmitted in
downlink
subframes. If the
switch for dynamic
adjustment of the
number of OFDM
symbols occupied
LBFD-002003 /
by the PDCCH is NO NO NO
TDLBFD-002003
turned on and the
bandwidth is 1.4
MHz or 3 MHz, the
PDCCH occupies 4
or 3 OFDM
symbols,
respectively, and
this parameter is
invalid. If the switch
is turned on and the
bandwidth is 5
MHz, 10 MHz, 15
MHz, or 20 MHz,
the eNodeB adjusts
the number of
OFDM symbols in
the range of 1, 2,
and 3 when this
Indicates the
percentage of the
number of virtually
loaded PDCCH
CCEs when the
PDCCH power
control switch is
turned off, or
indicates the
percentage of the
power of virtually
loaded PDCCH
CCEs when the LBFD-002003 /
NO NO NO
PDCCH power TDLBFD-002003
control switch is
turned on. This
parameter is used
to analyze the
impact of the
parameter values
on PDCCH
demodulation
performance and
provide reference to
intra-frequency
networking in LTE.
parameter is set to
OFF(Off), the
number of OFDM
symbols occupied
by the PDCCH is
fixed and cannot be
dynamically
adjusted. If this
parameter is set to
ON(On), the
number of OFDM
symbols occupied
by the PDCCH is
dynamically
adjusted based on
the required
number of PDCCH
control channel
elements (CCEs). LBFD-002003 /
NO NO NO
The OFDM symbol TDLBFD-002003
adjustment range
can be determined
by referring to the
MML reference of
the
InitPdcchSymNum
parameter. If this
parameter is set to
ECFIADAPTIONON
(Enhanced CFI
Adaption On), the
number of OFDM
symbols occupied
by the PDCCH is
dynamically
adjusted based on
the cell downlink
throughput, and the
Indicates the upper
limit for the CCE
usage within each
transmission time
interval (TTI). When
the switch for
dynamically
adjusting the
number of OFDM
LBFD-002003 /
symbols on the NO NO NO
TDLBFD-002003
PDCCH is turned
on, the parameter
setting is invalid,
that is, the CCE
usage within each
TTI cannot be
limited. This
parameter is valid
only in TDD mode.

Indicates the switch

used to enable or
disable closed-loop
adjustment to the
PDCCH
aggregation level. If
this switch is turned
on, PDCCH
aggregation level is
LBFD-002003 /
adjusted based on NO NO NO
TDLBFD-002003
the block error rate
(BLER) of the
PDCCH. If this
switch is turned off,
PDCCH
aggregation level is
not adjusted based
on the BLER of the
PDCCH.
Indicates whether
to enable virtual
loading for Digital
PreDistortion
NO NO NO None
(DPD).This
parameter is valid
only for LTE TDD
cells.

Indicates the virtual

load type for Digital
PreDistortion
(DPD).This NO NO NO None
parameter is valid
only for LTE TDD
cells.
selection of the
physical downlink
control channel
(PDCCH) in dual-
codeword
scenarios. In
capacity-based
CCE aggregation
level selection of
the PDCCH, set this
parameter to
STRATEGYBASED
ONCAPACITY. In
this situation, the
average CCE
aggregation level of
the PDCCH in dual-
codeword scenarios
decreases, and NO NO NO None
more UEs can be
supported on the
PDCCH. In
coverage-based
CCE aggregation
level selection of
the PDCCH, set this
parameter to
STRATEGYBASED
ONCOVERAGE. In
this situation, both
the average CCE
aggregation level of
the PDCCH in dual-
codeword scenarios
and cell coverage
performance
increase. This
CCEs to the UE by
increasing the
PDCCH power and
decreasing the
PDCCH
aggregation level
for the UE. If this
parameter is set to
OFF(Off), (1) the
initial value for
closed-loop
adjustment on
PDCCH
aggregation level
applies to both
SRBs and DRBs;
(2) if a UE fails to
be allocated with
CCEs, the eNodeB NO NO NO LBFD-002003
does not reallocate
CCEs to the UE by
increasing the
PDCCH power and
decreasing the
PDCCH
aggregation level
for the UE. For LTE
TDD networks, if
this parameter is
set to ON(On), the
eNodeB reallocates
CCEs to a UE, if
the UE fails to be
allocated with
CCEs, by
increasing the
PDCCH transmit

Indicates the
maximum coding
rate on the PDCCH.
The coding rate on
the PDCCH cannot
LBFD-002003 /
exceed this NO NO NO
TDLBFD-002003
parameter value.
Otherwise the
PDCCH
aggregation level
must be increase.
Switch parameter is
set to OFF, this
parameter indicates
the number of
OFDM symbols
occupied by the
PDCCH where the
downlink subframe
indicating the uplink
and downlink
scheduling and
controlling
information is
transmitted. For
downlink subframes
indicating both
uplink and downlink
scheduling and
controlling
NO NO NO TDLBFD-002003
information, if the
PDCCH Symbol
Number Adjust
Switch parameter is
set to ON, the
number of OFDM
symbols occupied
by the PDCCH is as
follows: On the
bandwidth of 5
MHz, the PDCCH
occupies 2 or 3
OFDM symbols. (In
this case, the
configuration of this
parameter is
invalid.) On the
bandwidth of 10
MHz, 15 MHz, or 20
Indicates the
adaptive strategy of
the PDCCH
aggregation level.
The
STRATEGYBASED
ONCOVERAGE
check box is
selected for this
parameter by
default. In this case,
a higher
aggregation level is
applied, and
therefore the cell
that the control
channel serves has
better coverage. LBFD-002003 /
NO NO NO
However, the TDLBFD-002003
number of
scheduling UEs
carried by the
control channel
decreases. If the
STRATEGYBASED
ONCAPACITY
check box is
selected, a lower
aggregation level is
applied, and the
control channel
carries more
scheduling UEs.
This parameter is
dedicated to LTE
TDD cells.
Indicates the
hysteresis of control
format indicator
(CFI) number
increase caused by
uplink preallocation
failures when the
PdcchSymNumSwit
ch parameter is set
to NO NO NO LBFD-002003
ECFIADAPTIONON
. If the
HysForCfiBasedPre
Sch parameter is
set to 0,
preallocation
failures do not
trigger CFI number
increase.
Indicates the
threshold of
isolation for
determining
whether to enable
PDCCH SDMA in
adaptive
SFN/SDMA
scenarios. For a
UE, if the ratio
between the RSRP
of RRUs with strong
signals and that of NO NO NO TDLOFD-002008
RRUs with weak
signals in an SFN
cell is equal to or
greater than the
value of this
parameter, the UE
only use resources
of RRUs with strong
signals while RRUs
with weak signals
can be reused by
other UEs.
Indicates whether
to enable the
mechanism of
increasing the
control channel
element (CCE)
resource allocation
success rate in the
uplink.
ReserveCommonC
CESwitch: Indicates LBFD-002003 /
NO NO NO
whether to reserve TDLBFD-002003
CCE resources in
the common search
space for the
uplink. CCE
resources in the
common search
space are reserved
for the uplink only
when this switch is
on.
Indicates the
maximum ratio of
the uplink and
downlink initial
CCEs on the
PDCCH. If this
parameter is set to
1_2, the maximum
uplink-downlink
initial CCE ratio is
1:2. If this
parameter is set to
a value greater than
1_2, the maximum
uplink-downlink
initial CCE ratio can
be dynamically
LBFD-002003 /
changed to any NO NO NO
TDLBFD-002003
value ranging from
1_2 to the
configured value
based on the load
in the uplink and
downlink. If
subframe
configuration 2 is
adopted for a TDD
cell, it is
recommended that
the
SubframeSchDiffSw
itch check box be
selected to ensure
the PRB usage on
subframes 3 and 8.
Indicates whether
to enable enhanced
PDCCH power
control. If this
switch is turned on,
the eNodeB selects
appropriate PDCCH LBFD-002003 /
NO NO NO
transmit power TDLBFD-002003
based on channel
quality to increase
PDCCH capacity.
This parameter is
valid only for FDD,
not for TDD.

Indicates the target

BLER in PDCCH
LBFD-
link adaptation. The
NO NO NO 070107;TDLBFD-
PDCCH BLER must
002003
converge on this
target BLER.
to enable enhanced
aggregation level
selection of access
signaling on high
load networks. If
this parameter is
set to ON(On), the
eNodeB accurately
estimates the
channel conditions
when a UE
accesses a high
load network where
PDCCH resources
are insufficient, and
selects a PDCCH
aggregation level
for the UE that
better matches the LBFD-002003 /
NO NO NO
UE's actual signal TDLBFD-002003
quality. It is
recommended that
this parameter be
set to ON(On) and
the
PuschDtxSchOptS
witch option of the
UlSchSwitch
parameter in the
CellAlgoSwitch MO
be selected. If this
parameter is set to
OFF(Off), the
eNodeB selects a
high aggregation
level for all access
signaling to ensure
the PDCCH
Indicates whether
to enable
algorithms related
to the EPDCCH.
EpdcchFunctionSwi
tch: Indicates
LBFD-
whether to support
NO NO NO 002003/TDLBFD-
EPDCCH. If this
002003
option is selected,
EPDCCH is
supported. This
parameter applies
only to LTE FDD
cells.

Indicates the CCE

usage threshold for
configuring the
EPDCCH. If the
CCE usage is
greater than this
parameter value, LBFD-002003 /
NO NO NO
the eNodeB TDLBFD-002003
configures
EPDCCH resources
for newly accessed
UEs.This parameter
applies only to LTE
FDD cells.
Indicates the
downlink RB usage
threshold for
configuring
EPDCCH. If the
downlink RB usage
is less than this
parameter value, LBFD-002003 /
NO NO NO
the eNodeB TDLBFD-002003
configures
EPDCCH resources
for newly accessed
UEs. This
parameter applies
only to LTE FDD
cells.

Indicates the CCE

usage threshold for
disabling EPDCCH.
If the CCE usage is
lower than this
parameter value, LBFD-002003 /
NO NO NO
the eNodeB TDLBFD-002003
disables the
EPDCCH. This
parameter applies
only to LTE FDD
cells.

Indicates the ECCE

usage threshold for
disabling EPDCCH.
If the ECCE usage
is lower than this
parameter value, LBFD-002003 /
NO NO NO
the eNodeB TDLBFD-002003
disables the
EPDCCH. This
parameter applies
only to LTE FDD
cells.
Indicates the
downlink RB usage
threshold for
disabling EPDCCH.
If the downlink RB
usage is greater
LBFD-002003 /
than this parameter NO NO NO
TDLBFD-002003
value, the eNodeB
disables the
EPDCCH. This
parameter applies
only to LTE FDD
cells.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the
threshold for the
low load state of the
SRI resources. The
SRI resources enter
the low load state if
the PUCCH LBFD-002003 /
NO NO NO
resource allocation TDLBFD-002003
algorithm detects
that the number of
admitted UEs is
smaller than the
value of this
parameter.
indicator (SRI)
reconfiguration.
This parameter
setting takes effect
only when
PucchSwitch of the
PucchAlgoSwitch
parameter is on and
the
SriAdaptiveSwitch
parameter is set to
ON. If the
SriReCfgInd
parameter is set to
TRUE, the cell
supports SRI
reconfiguration. In
large traffic
scenarios, SRI
NO NO NO LBFD-002003
reconfiguration can
be performed on
UEs with short SRI
periods to decrease
the probability that
the maximum SRI
period (80 ms) is
configured. In this
way, user
experience in the
cell improves. If the
SriReCfgInd
parameter is set to
FALSE, the cell
does not support
SRI reconfiguration.
This parameter
applies only to cells
served by LTE FDD
effect only when
both PUCCH
resource
adjustment and SRI
reporting period
adaptation are
enabled.
SriPeriodCfgOptSW
: Indicates whether
to optimize SRI
reporting period
configuration. If this
option is selected,
SRI reporting
periods are
configured based
only on the SRI
reporting resource
LBFD-002003 /
usage in the cell. NO NO NO
TDLBFD-002003
When CA and
VoLTE are enabled,
many UEs can be
assigned short SRI
reporting periods,
the amount of
PUCCH resource
increases, but the
amount of available
PUSCH resource
decreases. If this
option is
deselected, SRI
reporting periods
are configured
based on the
resource usage for
all of SRI reporting,
Indicates the local
ID of the cell. It
LBFD-001001 /
uniquely identifies a YES YES NO
TDLBFD-001001
cell within an
eNodeB.
8N/10), [8N/10,
9N/10), [9N/10, N),
and [N, infinity).
Each interval
corresponds to a
set of performance
counters. The
number of UEs in
RRC_CONNECTE
D mode is
periodically
sampled, and the
interval in which
falls the number of
UEs in
RRC_CONNECTE
D mode can be
determined. All
performance LBFD-002007 /
NO NO NO
counters TDLBFD-002007
corresponding to
the interval
increase by one if
related conditions
are met. For
detailed
descriptions about
the performance
counters controlled
by this parameter,
see "Description" of
the L.Traffic.User
function subset in
eNodeB
Performance
Counter Reference.
To ensure that all
sampled numbers
Indicates whether
to enable uplink
IBLER optimization.
If this switch is
turned on, the TBs
in the DTX state are
not taken into
account for the
IBLER based on
the PUSCH DTX
detection result.
This switch takes
effect only when
subframe
configuration 2 or 5
is used. If a TDD
cell is established NO NO NO TDLOFD-00101502
on an LBBPc,
PUSCH DTX
detection is not
supported. If this
switch is turned on
when
PuschDtxSchOptS
witch check boxes
are cleared, this
switch does not
take effect. The
uplink IBLER is not
affected. This
switch applies only
to LTE TDD
networks.
Indicates whether
to enable cell-level
algorithms related
to performance
counters. This
parameter includes
the following
options:
BasedA3EdgeUser
Switch: Indicates
whether to enable
A3-based cell edge
user (CEU) NO NO NO None
identification. If this
option is selected,
the eNodeB starts
to identify CEUs
based on A3-
related
measurement
reports and collects
related
performance
counters based on
the identified CEUs.

Indicates the offset

for cell edge user
(CEU) identification
event A3. This
offset is the
difference between
the signal quality of
a neighboring cell
and that of the
serving cell. A larger
value of this
parameter results
that better signal
quality of the
NO NO NO None
neighboring cell is
required for the
reporting of CEU
identification event
A3 and the eNodeB
has a lower
probability of
identifying a UE as
a CEU. A smaller
value of this
parameter results in
a higher probability
that a UE is
identified as a CEU.
Indicates the upper
bound of range 0
(which also serves
as the lower bound
of range 1) of the
downlink
throughput
distribution
measured by
performance
counters. The range
0 is (0,
DlThrpPdfThd0),
and the range 1 is
NO NO NO None
[DlThrpPdfThd0,
DlThrpPdfThd1).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the downlink
throughput
distribution in
Performance
Counter Reference.

Indicates the upper

bound of range 1
(which also serves
as the lower bound
of range 2) of the
downlink
throughput
distribution
measured by
performance
counters. The range
1 is
[DlThrpPdfThd0,
DlThrpPdfThd1),
and the range 2 is NO NO NO None
[DlThrpPdfThd1,
DlThrpPdfThd2).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the downlink
throughput
distribution in
Performance
Counter Reference.
Indicates the upper
bound of range 2
(which also serves
as the lower bound
of range 3) of the
downlink
throughput
distribution
measured by
performance
counters. The range
2 is
[DlThrpPdfThd1,
DlThrpPdfThd2),
and the range 3 is NO NO NO None
[DlThrpPdfThd2,
DlThrpPdfThd3).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the downlink
throughput
distribution in
Performance
Counter Reference.

Indicates the upper

bound of range 3
(which also serves
as the lower bound
of range 4) of the
downlink
throughput
distribution
measured by
performance
counters. The range
3 is
[DlThrpPdfThd2,
DlThrpPdfThd3),
and the range 4 is NO NO NO None
[DlThrpPdfThd3,
DlThrpPdfThd4).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the downlink
throughput
distribution in
Performance
Counter Reference.
Indicates the upper
bound of range 4
(which also serves
as the lower bound
of range 5) of the
downlink
throughput
distribution
measured by
performance
counters. The range
4 is
[DlThrpPdfThd3,
DlThrpPdfThd4),
and the range 5 is NO NO NO None
[DlThrpPdfThd4,
DlThrpPdfThd5).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the downlink
throughput
distribution in
Performance
Counter Reference.

Indicates the upper

bound of range 5
(which also serves
as the lower bound
of range 6) of the
downlink
throughput
distribution
measured by
performance
counters. The range
5 is
[DlThrpPdfThd4,
DlThrpPdfThd5),
and the range 6 is NO NO NO None
[DlThrpPdfThd5,
DlThrpPdfThd6).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the downlink
throughput
distribution in
Performance
Counter Reference.
Indicates the upper
bound of range 6
(which also serves
as the lower bound
of range 7) of the
downlink
throughput
distribution
measured by
performance
counters. The range
6 is
[DlThrpPdfThd5,
DlThrpPdfThd6),
and the range 7 is NO NO NO None
[DlThrpPdfThd6,
DlThrpPdfThd7).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the downlink
throughput
distribution in
Performance
Counter Reference.

Indicates the upper

bound of range 7
(which also serves
as the lower bound
of range 8) of the
downlink
throughput
distribution
measured by
performance
counters. The range
7 is
[DlThrpPdfThd6,
DlThrpPdfThd7),
and the range 8 is NO NO NO None
[DlThrpPdfThd7,
DlThrpPdfThd8).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the downlink
throughput
distribution in
Performance
Counter Reference.
Indicates the upper
bound of range 8
(which also serves
as the lower bound
of range 9) of the
downlink
throughput
distribution
measured by
performance
counters. The range
8 is
[DlThrpPdfThd7,
DlThrpPdfThd8),
and the range 9 is NO NO NO None
[DlThrpPdfThd8,
Infinity). For details
about the
performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the downlink
throughput
distribution in
Performance
Counter Reference.

Indicates the upper

bound of range 0
(which also serves
as the lower bound
of range 1) of the
uplink throughput
distribution
measured by
performance
counters. The range
0 is (0,
UlThrpPdfThd0),
and the range 1 is
[UlThrpPdfThd0, NO NO NO None
UlThrpPdfThd1).
For details about
the performance
counter associated
with this parameter,
see "Description" of
the performance
counters measuring
the uplink
throughput
distribution in
Performance
Counter Reference.
Indicates the upper
bound of range 1
(which also serves
as the lower bound
of range 2) of the
uplink throughput
distribution
measured by
performance
counters. The range
1 is
[UlThrpPdfThd0,
UlThrpPdfThd1),
and the range 2 is
NO NO NO None
[UlThrpPdfThd1,
UlThrpPdfThd2).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the uplink
throughput
distribution in
Performance
Counter Reference.

Indicates the upper

bound of range 2
(which also serves
as the lower bound
of range 3) of the
uplink throughput
distribution
measured by
performance
counters. The range
2 is
[UlThrpPdfThd1,
UlThrpPdfThd2),
and the range 3 is
NO NO NO None
[UlThrpPdfThd2,
UlThrpPdfThd3).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the uplink
throughput
distribution in
Performance
Counter Reference.
Indicates the upper
bound of range 3
(which also serves
as the lower bound
of range 4) of the
uplink throughput
distribution
measured by
performance
counters. The range
3 is
[UlThrpPdfThd2,
UlThrpPdfThd3),
and the range 4 is
NO NO NO None
[UlThrpPdfThd3,
UlThrpPdfThd4).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the uplink
throughput
distribution in
Performance
Counter Reference.

Indicates the upper

bound of range 4
(which also serves
as the lower bound
of range 5) of the
uplink throughput
distribution
measured by
performance
counters. The range
4 is
[UlThrpPdfThd3,
UlThrpPdfThd4),
and the range 5 is
NO NO NO None
[UlThrpPdfThd4,
UlThrpPdfThd5).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the uplink
throughput
distribution in
Performance
Counter Reference.
Indicates the upper
bound of range 5
(which also serves
as the lower bound
of range 6) of the
uplink throughput
distribution
measured by
performance
counters. The range
5 is
[UlThrpPdfThd4,
UlThrpPdfThd5),
and the range 6 is
NO NO NO None
[UlThrpPdfThd5,
UlThrpPdfThd6).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the uplink
throughput
distribution in
Performance
Counter Reference.

Indicates the upper

bound of range 6
(which also serves
as the lower bound
of range 7) of the
uplink throughput
distribution
measured by
performance
counters. The range
6 is
[UlThrpPdfThd5,
UlThrpPdfThd6),
and the range 7 is
NO NO NO None
[UlThrpPdfThd6,
UlThrpPdfThd7).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the uplink
throughput
distribution in
Performance
Counter Reference.
Indicates the upper
bound of range 7
(which also serves
as the lower bound
of range 8) of the
uplink throughput
distribution
measured by
performance
counters. The range
7 is
[UlThrpPdfThd6,
UlThrpPdfThd7),
and the range 8 is
NO NO NO None
[UlThrpPdfThd7,
UlThrpPdfThd8).
For details about
the performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the uplink
throughput
distribution in
Performance
Counter Reference.

Indicates the upper

bound of range 8
(which also serves
as the lower bound
of range 9) of the
uplink throughput
distribution
measured by
performance
counters. The range
8 is
[UlThrpPdfThd7,
UlThrpPdfThd8),
and the range 9 is
NO NO NO None
[UlThrpPdfThd8,
Infinity). For details
about the
performance
counters associated
with this parameter,
see "Description" of
the performance
counters measuring
the uplink
throughput
distribution in
Performance
Counter Reference.
Indicates the uplink
reception error rate
threshold for
identifying
abnormal UEs. If
this parameter is
set to 0, an eNodeB
does not identify
abnormal UEs
based on service
drops. If this
parameter is set to
a non-zero value, NO NO NO None
an eNodeB
identifies the UE as
an abnormal UE
when the uplink
reception error rate
threshold reaches
the threshold
specified by this
parameter. This
parameter applies
only to LTE TDD
networks.

Indicates the local

ID of the cell. It LBFD-001001 /
YES YES NO
uniquely identifies a TDLBFD-001001
cell within a BS.
Indicates the type
of the cell frame
offset.
CustomFrameOffse
t: indicates a user-
defined frame
offset.
TL_FrameOffst:
indicates the frame
offset automatically
set based on the
subframe
configuration in a
TD-SCDMA+LTE
NO NO NO None
TDD dual-mode
network.
TL_FrameOffset_S
A2_SSP5: indicates
the frame offset
automatically set
based on the
subframe
configuration 2 and
special subframe
configuration 5 in a
TD-SCDMA+LTE
TDD dual-mode
network.

Indicates the time

delay of the frame
start time for all
NO NO NO None
TDD E-UTRAN
cells to the time of
the reference clock.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the time
when the cell no-
traffic detection
starts. If the stop
time is earlier than
or the same as the
start time, the end
time is assumed to
be a time of the
NO NO NO LOFD-002010
next day. If the
timer for reporting
the no-traffic alarm
is not set to 0, the
eNodeB performs
the cell no-traffic
detection from the
start time to the
stop time.

Indicates the time

when the cell no-
traffic detection
stops. If the stop
time is earlier than
or the same as the
start time, the stop
time is assumed to
be a time of the
NO NO NO LOFD-002010
next day. If the
timer for reporting
the no-traffic alarm
is not set to 0, the
eNodeB performs
the cell no-traffic
detection from the
start time to the
stop time.
Indicates the length
of the timer for the
cell no-traffic
detection. If there is
no traffic in the cell
within the duration
specified by this
parameter, the
eNodeB reports the
no-access alarm
and resets the cell.
If this parameter is
NO NO NO LOFD-002010
set to 0, the cell no-
traffic detection is
not performed. If
the timer for
reporting the no-
traffic alarm is set to
a non-zero value,
the eNodeB
performs the cell
no-traffic detection
from the start time
to the stop time.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the band

division scheme
used in uplink ICIC.
The band division in
the cell is changed
according to the
setting of this
parameter so that LBFD-00202202 /
the edge bands do NO NO NO TDLBFD-00202202
not overlap LOFD-00101402
between
neighboring cells. If
this parameter is
set to INVALID, the
cell does not
distinguish center
and edge bands.

Indicates the local

identity of the cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the
number of RBs that
are interfered by
GERAN at each
end of the LTE DL
frequency band. If
the numbers of
such RBs are
different at both
ends, the larger
number is used as NO NO NO MRFD-231808
the value of this
parameter.
If this parameter is
set to 3, three RBs
are interfered by
GERAN at each
end of the LTE DL
frequency band and
altogether six RBs
are interfered.

Indicates the SINR

threshold for
determining
whether DL RB
resources of an E-
UTRAN cell using
the LTE frequency
spectrum that
overlaps the GSM
frequency spectrum
are available. If the
result of the local
cell RSRP plus 11.2
and minus the RSSI
of the GERAN cell
that brings the
severest
interference is
NO NO NO None
greater than the
value of this
parameter, UEs can
use these RB
resources.
Otherwise, UEs
cannot use these
RB resources. UEs
measure the local
cell RSRP and the
RSSI of the
GERAN cell that
brings the severest
interference and
report the
measurement
results to the
eNodeB.
Indicates the Local
ID of the cell. It
YES YES NO TDLAOFD-080405
uniquely identifies a
cell within a BS.

subframes in each
radio frame is 10.
For example, the
value 2/10 indicates
that two uplink
subframes in each
radio frame are
used as relay
subframes. In the
LTE TDD system,
the number of
uplink subframes
used for common
UEs is calculated
by subtracting the
number of uplink
subframes used as
relay subframes
from the number of
NO YES NO TDLAOFD-080405
uplink subframes
specified by the
subframe
configuration. Relay
subframes are
preferentially
scheduled for relay
remote nodes
(RRN)s while
common subframes
are preferentially
scheduled for
common UEs. If the
relay subframes are
not used up, they
can be used for
scheduling for
common UEs and if
the common
subframes in each
radio frame is 10.
For example, the
value 2/10 indicates
that two downlink
subframes in each
radio frame are
used as relay
subframes. In the
LTE TDD system,
the number of
downlink subframes
used for common
UEs is calculated
by subtracting the
number of downlink
subframes used as
relay subframes
from the number of
NO YES NO TDLAOFD-080405
downlink subframes
specified by the
subframe
configuration. Relay
subframes are
preferentially
scheduled for relay
remote nodes
(RRNs) while
common subframes
are preferentially
scheduled for
common UEs. If the
relay subframes are
not used up, they
can be used for
scheduling for
common UEs and if
the common

Indicates the
minimum interval
between uplink
preallocations for a
relay remote node
(RRN). The interval
NO NO NO TDLAOFD-080405
between two
preallocations for
the same RRN
cannot be smaller
than the value of
this parameter.
Indicates the uplink
preallocation data
volume of a relay
remote node
(RRN), that is, the NO NO NO TDLAOFD-080405
data volume that
can be transmitted
during an RRN
preallocation.

Indicates the target

IBLER used in the
SINR adjustment
algorithm for uplink
dynamic scheduling
of RRNs. A larger
value of this
parameter leads to
NO NO NO TDLAOFD-080405
a greater SINR
adjustment value,
and therefore a
higher MCS index is
used. This
parameter applies
only to LTE TDD
networks.

Indicates the target

IBLER used in the
SINR adjustment
algorithm for
downlink dynamic
scheduling of
RRNs. A larger
value of this
parameter leads to NO NO NO TDLAOFD-080405
a greater SINR
adjustment value,
and therefore a
higher MCS index is
used. This
parameter applies
only to LTE TDD
networks.
Indicates whether
to enable the
enhanced uplink
scheduling function
related to RRNs.
UlSPSDegradeSwit
ch: If this check box
is selected, the
uplink SPS priority
of normal UEs
becomes lower
NO NO NO TDLAOFD-080405
than the uplink
scheduling priority
of RRNs in uplink
relay subframes. If
this check box is
deselected, the
uplink SPS priority
is not lowered. This
parameter applies
only to LTE TDD
networks.

Indicates whether
to enable the
enhanced downlink
scheduling function
related to RRNs.
DlSPSDegradeSwit
ch: If this check box
is selected,
downlink SPS does
not take effect in NO NO NO TDLAOFD-080405
downlink relay
subframes. If this
check box is
deselected,
downlink SPS is not
affected.
This parameter
applies only to LTE
TDD networks.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the index
of a simulated load
configuration. One
eNodeB can store a
maximum of 10
simulated load
configurations.
They are identified
by indexes ranging
from 0 to 9 and
correspond to RB
usage thresholds
(specified by the
SimuLoadRbThd
parameter) 10% to
100% at a step of
NO NO NO None
10%. For example,
the RB usage
thresholds for
simulated load
configurations 1
and 4 are 20% and
50%, respectively.
Alternatively, you
can also manually
specify the RB
usage threshold for
a simulated load
configuration by
setting the
SimuLoadRbThd
parameter.
Indicates the
transmission mode
adopted by the
simulated load
configuration,
including:
TM1: indicates
transmission mode
1 for the simulated
load configuration.
TM2: indicates
transmission mode
2 for the simulated
load configuration.
TM4: indicates
transmission mode
4 for the simulated
load configuration.
TM7: indicates NO NO NO None
transmission mode
7 for the simulated
load configuration.
TM8: indicates
transmission mode
8 for the simulated
load configuration.
TM9: indicates
transmission mode
9 for the simulated
load configuration.
The values TM4
and TM9 apply to
cells where 4T/8T
MIMO is enabled
and are used to
simulate 4T/8T
scrambling.
Indicates the PMI in
scenarios of
simulated load
NO NO NO None
configuration with
transmission mode
4 or 9.
Indicates the period
of time exceeding
which the cell
simulated load is
automatically
removed. After this
parameter value is
changed, the time
for automatically
removing the cell NO NO NO None
simulated load
restarts. If this
parameter is
changed to a value
the same as the
previous value of
this parameter, the
time does not
restart.
Indicates the
number of RBs
allocated to a
simulated load NO NO YES None
configuration in
downlink
scheduling.
Indicates the
number of RBs
allocated for
NO NO YES None
commercial
services in downlink
scheduling.
Indicates the power
allocated to a
simulated load
NO NO YES None
configuration in
downlink
scheduling.
Indicates the power
allocated for
commercial NO NO YES None
services in downlink
scheduling.
Indicates the
number of UEs
allocated by a
simulated load NO NO YES None
configuration in
downlink
scheduling.
Indicates the
number of users to
be scheduled in
each transmission NO NO YES None
time interval (TTI) in
downlink
scheduling.
Indicates the
remaining time of
automatically NO NO YES None
removing the cell
simulated load.

Indicates the local

identity of the cell. It
uniquely identifies a
cell within an YES YES NO LOFD-081221
eNodeB. This
parameter applies
only to FDD cells.

Indicates the ID of
an edge physical
cell's sector
equipment used by
an SFN cell. It
uniquely identifies a YES YES NO LOFD-081221
set of sector
equipment within an
eNodeB. This
parameter applies
only to FDD cells.

Indicates the MCC

of a neighboring
SFN cell.
A PLMN ID is
composed of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
NO YES NO LOFD-081221
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
This parameter
applies only to FDD
cells.
Indicates the MNC
of a neighboring
SFN cell.
A PLMN ID is
composed of an
MCC and an MNC.
The MCC consists
of three digits.
The MNC consists
NO YES NO LOFD-081221
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
This parameter
applies only to FDD
cells.

Indicates the
eNodeB ID of a
neighboring SFN
NO YES NO LOFD-081221
cell. This parameter
applies only to FDD
cells.

Indicates the ID of a
neighboring SFN
cell. This parameter NO YES NO LOFD-081221
applies only to FDD
cells.

Indicates the ID of
an edge physical
cell's sector
equipment of a
NO YES NO LOFD-081221
neighboring SFN
cell. This parameter
applies only to FDD
cells.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the
modification period
coefficient for the
BCCH. BCCH
modification period
is equal to
Modification period
coefficient multiplies
Default paging
LBFD-002009 /
cycle, where the NO NO NO
TDLBFD-002009
BCCH modification
period and default
paging cycle are
measured in unit of
radio frames, and
the modification
period coefficient is
specified by this
parameter.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the offset
of the PCFICH LBFD-002016 /
transmit power TDLBFD-002016
NO NO NO
relative to the LBFD-002009 /
reference signal TDLBFD-002009
power.
Indicates the offset
of the PBCH LBFD-002016 /
transmit power TDLBFD-002016
NO NO NO
relative to the LBFD-002009 /
reference signal TDLBFD-002009
power.
Indicates the offset
of the transmit
LBFD-002016 /
power for the cell
TDLBFD-002016
synchronization NO NO NO
LBFD-002009 /
signals relative to
TDLBFD-002009
the reference signal
power.
Indicates the offset
of the transmit
power for broadcast LBFD-002016 /
information on the TDLBFD-002016
NO NO NO
PDSCH channel LBFD-002009 /
relative to the TDLBFD-002009
reference signal
power.
Indicates the offset
of the transmit
LBFD-002011
power for the
LBFD-002016 /
paging information
NO NO NO TDLBFD-002016
on the PDSCH
LBFD-002009 /
channel relative to
TDLBFD-002009
the reference signal
power.
Indicates the offset
of the transmit
power for the
LBFD-002016 /
random access
TDLBFD-002016
responses on the NO NO NO
LBFD-002009 /
PDSCH channel
TDLBFD-002009
relative to the
reference signal
power.
Indicates the offset
LBFD-002016 /
of the pilot power
TDLBFD-002016
relative to the NO NO NO
LOFD-001047 /
reference signal
TDLOFD-001047
power.

Indicates the
transmit power for
the entire channel
bandwidth at each
antenna connector.
If the
AntRsPwrSwitch
option of the
RepeaterSwitch
NO NO NO LBFD-002016
parameter is
selected, this
parameter value is
used to calculate
the reference signal
(RS) power to be
delivered in system
information block
type 2 (SIB2).
Indicates the offset
of PMCH power to
the maximum
PDSCH power. The
maximum PDSCH
power is calculated
by using the
following formula:
Max(P_PDSCH_A,
P_PDSCH_B). For
LOFD-
details about
NO NO NO 070220/TDLOFD-
formulas to
070220
calculate
P_PDSCH_A and
P_PDSCH_B, see
section "Basics of
PDSCH Power
Calculation" in
Power Control
Feature Parameter
Description
.
transmit power of
the Random Access
Response (RAR)
message when a
UE is being handed
over to the target
cell and repeatedly
sends dedicated
preambles. If this
parameter is set to
OFF(OFF), the
eNodeB does not
increase the
transmit power of
the RAR message
sent to the UE that
is being handed
over to the target
LBFD-002016 /
cell. If this NO NO NO
TDLBFD-002016
parameter is set to
ON(ON) and a UE
that is being
handed over to the
target cell
repeatedly sends
dedicated
preambles, the
eNodeB increases
the transmit power
of the RAR
message by
another 3 dB each
time on the basis of
the RaRspPwr
parameter value.
The transmit power
of the RAR
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.

Indicates the cell

reference signal
power of each
LBFD-002016 /
physical antenna.
TDLBFD-002016
However, the cell NO NO NO
LBFD-002009 /
reference signal
TDLBFD-002009
power delivered in
SIB2 is that of each
logical antenna.
Indicates the
scaling factor index
of the Energy Per
Resource Element
(EPRE) on the
LBFD-002016 /
PDSCH. This
TDLBFD-002016
scaling factor is NO NO NO
LBFD-002009 /
determined by the
TDLBFD-002009
value of this
parameter and the
antenna port. For
details, see 3GPP
TS 36.213.

Indicates the cell

reference signal
power headroom of
each physical
NO NO NO None
antenna. This
parameter applies
only to LTE TDD
cells.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the step
by which the TX
power for random
access preambles
is increased each
time after a RACH
access failure. If
multiple attempts to
LBFD-002009 /
access the PRACH
TDLBFD-002009
fail, the UE
LBFD-002010 /
increases the TX NO NO NO
TDLBFD-002010
power for random
LBFD-002026 /
access preambles
TDLBFD-002026
by a step specified
by this parameter
each time after an
access failure to
ensure successful
access.
For details, see
3GPP TS 36.321.

Indicates the target

UE transmit power
for the PRACH
expected by the
eNodeB when LBFD-002009 /
PRACH preamble TDLBFD-002009
format 0 is applied LBFD-002010 /
NO NO NO
on condition that TDLBFD-002010
requirements for LBFD-002026 /
preamble detection TDLBFD-002026
performance are
met.
For details, see
3GPP TS 36.321.
Indicates the length
index for the Zadoff-
Chu sequence that
generates the
random access NO NO YES None
preamble.For
details about this
parameter,see
3GPP TS 36.211.

Indicates the
threshold for
determining the
size of Msg3 when
a UE selects a LBFD-002009 /
preamble from TDLBFD-002009
NO NO NO
random access LBFD-002010 /
preamble group A TDLBFD-002010
during a random
access procedure.
For details, see
3GPP TS 36.321.

Indicates the offset

to the starting LBFD-002009 /
position of each TDLBFD-002009
NO NO NO
PRACH in the LBFD-002010 /
frequency domain TDLBFD-002010
of the FDD cell.
Indicates whether
to configure a
PRACH
configuration index
for a cell. If an LTE LBFD-002009 /
TDD cell is TDLBFD-002009
NO NO NO
established on an LOFD-002015 /
LBBPc, the PRACH TDLOFD-002015
configuration index
configured for the
cell does not take
effect.

Indicates the
PRACH
configuration index
of the cell. If cells
LBFD-002009 /
are established on
TDLBFD-002009
an LBBPc in a
LBFD-002010 /
4T4R scenario, the NO NO NO
TDLBFD-002010
PRACH
LOFD-002015 /
configuration
TDLOFD-002015
indexes of different
cells must be
separated in the
time domain.
Indicates the
maximum number
LBFD-002009 /
of preamble
TDLBFD-002009
transmission times. NO NO NO
LBFD-002010 /
For details about
TDLBFD-002010
this parameter, see
3GPP TS 36.321.

Indicates the period

that a UE waits for
message 4 (Msg4)
during a random
access (RA)
procedure. This
timer starts when a
UE initially sends or
resends message 3
(Msg3). If the UE
receives Msg4 or
LBFD-002009 /
the NACK to Msg3
TDLBFD-002009
before the timer NO NO NO
LBFD-002010 /
expires, the timer
TDLBFD-002010
stops. If the UE
does not receive
either message
until the timer
expires, the RA
fails, and the UE
must reinitiate an
RA procedure. For
details about this
parameter, see
3GPP TS 36.321.
Indicates the
maximum number
of HARQ LBFD-002009 /
retransmissions of TDLBFD-002009
NO NO NO
the message 3. For LBFD-002010 /
details about this TDLBFD-002010
parameter, see
3GPP TS 36.321.

Indicates the
proportion of the
number of random
preambles in a cell
to the number of
preambles in the
cell. The number of
random preambles
in a cell is
calculated by this
parameter value
multiplied by the
number of
preambles in the
cell. Preambles in a LBFD-002010 /
NO NO NO
cell can be TDLBFD-002010
classified as
random preambles
and dedicated
preambles, which
are used for
contention-based
random access and
non-contention-
based random
access,
respectively. For
details, see section
5.1.1 in 3GPP TS
36.321.
Indicates the
proportion of the
number of group A
random preambles
in a cell to the
number of random
preambles in the
cell. The number of
group A random
preambles in a cell
is calculated by this
parameter value
multiplied by the
number of random
preambles in the LBFD-002010 /
NO NO NO
cell. Preambles in a TDLBFD-002010
cell can be
classified as
random preambles
and dedicated
preambles, and
random preambles
are classified into
group A random
preambles and
group B random
preambles. For
details, see section
5.1.1 in 3GPP TS
36.321.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
configuration for the
cell. The value SCn,
where n is variable,
represents
configuration n. For
example, the value
SC0 indicates
subframe
configuration 0, and
the value SC1
indicates subframe
configuration 1. If
the cell operates in
FDD mode, the
value SC15 is
reserved. If the cell
operates in TDD
mode, the values
LBFD-002003 /
SC14 and SC15 NO NO NO
TDLBFD-002003
are reserved. The
reserved values
cannot be used. For
the relationship
between the
subframe
configuration index
and the cell-specific
subframe
cycle/offset, see
3GPP TS 36.211. In
FDD mode, this
parameter is
permanently valid.
In TDD mode, this
parameter is valid
only if
TddSrsCfgMode is
Indicates whether
the sounding
reference signal
(SRS) of a UE and
the ACK/NACK or
scheduling request
(SR) on the PUCCH
are allowed to use
the same time
resources for
simultaneous
transmission.
If this parameter is
set to
BOOLEAN_FALSE,
simultaneous
transmission is not LBFD-002003 /
NO NO NO
allowed. In this TDLBFD-002003
situation, the UE
discards the SRS
and only transmits
the ACK/NACK or
SR on the PUCCH.
If this parameter is
set to
BOOLEAN_TRUE,
simultaneous
transmission is
allowed. In this
situation, the UE
transmits truncated
ACK/NACK or SR.
For details, see
3GPP TS 36.211.
signal (SRS)
resources for UEs
in a cell. The value
BOOLEAN_TRUE
indicates that SRS
resources are
available in the cell
and can be
configured for UEs
in the cell. The
value
BOOLEAN_FALSE
indicates that no
SRS resource is
available in the cell,
and therefore no
UE in the cell is
configured with
SRS resources. LBFD-002003 /
NO NO NO
This parameter TDLBFD-002003
does not take effect
on: (1) FDD cell that
is established on an
LBBPc and uses
four or more RX
antennas. (2) FDD
cell that is
established on an
LBBPc and uses
extended cyclic
prefix (CP) in the
uplink. (3) TDD cell
established on an
LBBPc. If this
parameter does not
take effect on a cell
but SRS resources
are available in the
EXPERIENCE_FIR
ST, the TDD SRS
configuration that is
designed to
preferentially
guarantee user
experience (for
example,
beamforming
performance) is
used. CAPS is
short for call
attempt per second.
If this parameter is
set to
EXPERIENCE_EN
HANCED, users
can experience
better downlink
NO NO NO TDLBFD-002003
services than
ACCESS_FIRST
mode. If this
parameter is set to
ACCESS_ENHANC
ED, more UEs can
access the network
than
EXPERIENCE_EN
HANCED
mode.The
parameter value
EXPERIENCE_EN
HANCED and
ACCESS_ENHANC
ED are not
supported by the
LBBPc. If a cell is
established on an
BOOLEAN_TRUE(
True). If the
FddSrsCfgMode
parameter is set to
DEFAULTMODE(D
efault Mode), SRS
resource allocation
is activated by
default after a cell is
established, and
SRS resources are
allocated to UEs
that access the cell.
If this parameter is
set to
ADAPTIVEMODE(A
daptive Mode),
SRS resource
allocation can be
NO NO NO None
adaptively activated
or deactivated
based on the cell
load. After this
parameter is set to
ADAPTIVEMODE(A
daptive Mode),
settings of
parameters
SrsAlgoSwitch,
SrsSubframeCfg,
and UserSrsPeriod
do not take effect.
The parameter
value
ADAPTIVEMODE(A
daptive Mode) is
recommended in
heavy-traffic
SrsSubframeRecfg
OptSwitch:
Indicates whether
to enable SRS
subframe tree
reconfiguration
optimization. This
option applies only
to LTE FDD. If this
option is selected,
SRS subframe tree
reconfiguration
migration path can
be optimized to NO NO NO None
avoid configurations
that may cause
terminal
compatibility
problems. If this
option is
deselected, the
SRS subframe tree
reconfiguration
migration path is
not optimized and
uses the current
policy.

Indicates the cell-

specific SRS
bandwidth. It
corresponds to the
srs-
NO NO YES None
BandwidthConfig
parameter in the
protocol. For
details, see 3GPP
TS 36.211.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the
PHICH duration
type. If this
parameter is set to
NORMAL, the
number of OFDM
symbols occupied
by the PDCCH is
automatically
adjusted. If this
parameter is set to LBFD-002003 /
EXTENDED, the TDLBFD-002003
number of OFDM NO NO NO LOFD-001051
symbols occupied LBFD-002009 /
by the PDCCH is TDLBFD-002009
fixed. Specifically,
this number is fixed
to 3 or 4 for 1.4
MHz cells and 3 for
cells with other
bandwidths. For the
mapping between
the type and the
duration, see 3GPP
TS 36.211.

Indicates a
coefficient that is
used to calculate
the resources used
by the PHICH for LBFD-002003 /
the cell. It TDLBFD-002003
corresponds to the NO NO NO LOFD-001051
Ng parameter in the LBFD-002009 /
protocol. TDLBFD-002009
For details on the
usage of the Ng
parameter, see
3GPP TS 36.211.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the
default paging
period for the cell. It
is also called the
discontinuous
reception (DRX)
period. If the EPC
specifies a DRX
period for a UE, the
UE compares this
period with the
LBFD-002009 /
value of this
TDLBFD-002009
parameter and uses NO NO NO
LBFD-002011 /
the smaller one as
TDLBFD-002011
its DRX period. If
the EPC does not
specify a DRX
period, the UE uses
the value of this
parameter, which is
delivered in the
system information,
as its DRX period.
For details, see
3GPP TS 36.304.

Indicates the
number of paging
occasions (a type of
subframe) within a
paging period. This LBFD-002009 /
parameter value TDLBFD-002009
NO NO NO
also indicates the LBFD-002011 /
number of paging TDLBFD-002011
groups within a
paging period. For
details, see 3GPP
TS 36.304.
Indicates the
number of paging
messages LBFD-002011 /
NO NO NO
transmitted to UEs TDLBFD-002011
over the air
interface.
Indicates the
maximum number
of UEs that can be LBFD-002011 /
NO NO NO
included in a paging TDLBFD-002011
message on each
paging occasion.
Indicates a paging
message sending
policy. There are
two policies: first in
first out (FIFO) and
priority
differentiation. FIFO
means that paging
messages that
TDLBFD-
arrive earlier are
NO NO NO 002011/LBFD-
preferentially sent
002011
in a paging
occasion. Priority
differentiation
means higher-
priority paging
messages are
preferentially sent
in a paging
occasion.

Indicates the local

ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the
number of PUSCH
LBFD-002009 /
sub-bands. NO NO NO
TDLBFD-002009
For details, see
3GPP TS 36.211.

Indicates the
hopping mode of
LBFD-002009 /
the PUSCH. NO NO NO
TDLBFD-002009
For details, see
3GPP TS 36.211.
Indicates the
hopping offset of
LBFD-002009 /
the PUSCH. NO NO NO
TDLBFD-002009
For details, see
3GPP TS 36.211.
Indicates whether
group hopping of
the PUSCH is LBFD-002009 /
NO NO NO
enabled. TDLBFD-002009
For details, see
3GPP TS 36.211.
Indicates the group
assignment of the
LBFD-002009 /
PUSCH. NO NO NO
TDLBFD-002009
For details, see
3GPP TS 36.211.
Indicates whether
sequence hopping
of the PUSCH is LBFD-002009 /
NO NO NO
enabled. TDLBFD-002009
For details, see
3GPP TS 36.211.

Indicates the cyclic

shift of the PUSCH. LBFD-002009 /
NO NO NO
For details, see TDLBFD-002009
3GPP TS 36.211.
Indicates whether
64QAM of the
LOFD-001006 /
PUSCH is enabled. NO NO NO
TDLOFD-001006
For details, see
3GPP TS 36.211.

Indicates whether
the eNodeB
supports UL
64QAM for UEs
complying with
Release 12 and
later. This
parameter is valid
only when the
Qam64Enabled
parameter is set to
BOOLEAN_TRUE(
True). When this
parameter is set to
BOOLEAN_TRUE(
True), the eNodeB
supports UL
64QAM for UEs LOFD-001006 /
NO NO NO
complying with TDLOFD-001006
36.331 V12.7.0 or
later as well as for
UEs complying with
versions earlier
than 36.331
V12.7.0. When this
parameter is set to
BOOLEAN_FALSE(
False), the eNodeB
does not support
UL 64QAM for UEs
complying with
36.331 V12.7.0 or
later. For details
about this
parameter, see
3GPP TS 36.211.
Indicates the local
ID of the cell. It
YES YES NO None
uniquely identifies a
cell within a BS.
Indicates the
interval between
cyclic shifts used for
the PUCCH. The
interval between
cyclic shifts used for
the PUCCH can be
acquired based on
the average delay
spread in the cell,
where the average
delay spread is
acquired based on
the networking
environment. The
parameter value
DS1_DELTA_SHIF LBFD-002003 /
NO NO NO
T is not supported TDLBFD-002003
by the LBBPc. If a
cell is established
on an LBBPc but
this parameter is
set to
DS1_DELTA_SHIFT
, the value of this
parameter is
automatically
changed to
DS2_DELTA_SHIF
T when this
parameter takes
effect. For details,
see 3GPP TS
36.211.

Indicates the
number of resource
indexes allocated to
SRI and semi-
persistent ACK at LBFD-002003 /
NO NO NO
the RRC layer for TDLBFD-002003
the cell. If this
parameter is set to
0, UEs may fail to
access the cell.
Indicates the
number of RBs
LBFD-002003 /
allocated to the CQI NO NO NO
TDLBFD-002003
at the RRC layer of
cell.

Indicates the total

number of RBs at
the two ends of the
system band that
are reserved for the
PUSCH. This
parameter is valid
only when the
PUCCH flexible
configuration switch
(PucchFlexCfgSwitc
h) is turned on. The
parameter setting
must consider the
LBFD-002003 /
number of RBs
NO NO NO TDLBFD-002003
used by the
LOFD-001093
PRACH, SRS, and
PUCCH as well as
the number of RBs
compressed. If the
parameter setting
exceeds the system
bandwidth
capability and
accordingly affects
the preceding RB
resource allocation,
the cell cannot be
established
successfully.

Indicates the
number of code LBFD-001001 /
channels that TDLBFD-001001
NO NO YES
reserved for the cell LBFD-002003 /
semi-persistent TDLBFD-002003
ACKs and SRIs.
PUCCH format
1/1a/1b code
channel resources.
The setting of this
parameter takes
effect only when the
DeltaShift
parameter is set to
DS1_DELTA_SHIF
T(ds1). If the
Format1ChAllocMo
de parameter is set
to
FIXEDMODE(Fixed
Mode), consecutive
PUCCH format
1/1a/1b code
channel resources
LBFD-002003 /
are always NO NO NO
TDLBFD-002003
allocated. If the
Format1ChAllocMo
de parameter is set
to
RANDOMMODE(R
andom Mode),
PUCCH format
1/1a/1b code
channel resources
are randomly
allocated. If this
parameter is set to
OPTISELECTMOD
E(OPTISELECTMO
DE), PUCCH format
1 code channel
resources are
allocated based on
Indicates whether
to enable
scheduling request
indicator (SRI)
period adaptation. If
this parameter is
set to
QCIADAPTIVE(QCI
ADAPTIVE), the
SRI period
adaptively changes
based on the cell
load and bearers
with different QCIs.
If this parameter is LBFD-002003 /
NO NO NO
set to TDLBFD-002003
NOQCIADAPTIVE(
NOQCIADAPTIVE),
the SRI period
adaptively changes
based on only the
cell load. If the
parameter is set to
OFF(OFF), the SRI
period is set to the
value of the
SriPeriod parameter
in the
CellStandardQci
MO.

Indicates the
channel resource
allocation mode for
PUCCH format
2/2a/2b. If this
parameter is set to
FIXEDMODE,
consecutive
channel resources
LBFD-002003 /
are allocated for NO NO NO
TDLBFD-002003
PUCCH format
2/2a/2b. If this
parameter is set to
RANDOMMODE,
channel resource
allocation is
optimized for
PUCCH format
2/2a/2b.
Indicates the ID of
the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the mobile

country code (MCC)
of the CDMA2000
1xRTT cell.
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
network code LOFD-001035 /
(MNC). YES YES NO TDLOFD-001035
The MCC consists TDLOFD-001090
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of the
CDMA2000 1xRTT
cell.
A public land mobile
network (PLMN) ID
is comprised of a
mobile country
LOFD-001035 /
code (MCC) and an
YES YES NO TDLOFD-001035
MNC.
TDLOFD-001090
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the cell ID
of the reference
CDMA2000 1xRTT
cell. The cell ID and
sector ID together
uniquely identify a
CDMA2000 cell in
the mobile
LOFD-001035 /
switching center
NO YES NO TDLOFD-001035
(MSC). In the
TDLOFD-001090
CDMA2000 1xRTT
network, a cell ID
uniquely identifies a
cell within the
mobile switching
center (MSC). A cell
ID consists of 12
bits.

Indicates the sector

ID of the reference
CDMA2000 1xRTT
cell. The cell ID and
sector ID together
uniquely identify a LOFD-001035 /
CDMA2000 cell in NO YES NO TDLOFD-001035
the mobile TDLOFD-001090
switching center
(MSC). A sector ID
is unique in a
CDMA2000 cell and
consists of four bits.

Indicates the
system ID of the
reference
CDMA2000 1xRTT
cell. A system ID is
allocated to each
LOFD-001035 /
local CDMA mobile
NO YES NO TDLOFD-001035
network and is used
TDLOFD-001090
to determine
whether a UE is in
the roaming state.
For details about
this parameter, see
3GPP2 C.S0005.
Indicates the
network ID of the
reference
CDMA2000 1xRTT
cell. A base station
is a cellular system
and a member of
the network. A
network is a subset
of a system that is
identified by a
system ID. A
network in a system
is identified by a
network ID. A
system ID and a
network ID together
LOFD-001035 /
uniquely identify a
NO YES NO TDLOFD-001035
network. System ID
TDLOFD-001090
0 and network ID 0
indicate all base
stations outside a
specified network
and are reserved
values. Network ID
65535 is also
reserved; this ID
indicates that the
roaming status of
UEs is non-roaming
in the whole system
no matter what the
network ID is. For
details, see the
description of NID
in 3GPP2 C.S0005.
the reference
CDMA2000 1xRTT
cell belongs. The
value begins with
0x followed by a
maximum of 6
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
cannot begin with 0,
for example, the
value cannot be
0x0123A. An MSC
ID uniquely
identifies an MSC LOFD-001035 /
and is determined NO NO NO TDLOFD-001035
by the operator. TDLOFD-001090
MSCID is defined in
TIA/EIA-41.5-D and
consists of
MarketID (2 bytes)
and SwitchNo (1
byte). MarketID is
described in
TIA/EIA TSB29 and
can be defined by
the operator. It can
be the SID or
another ID that can
differentiate
operators.
SwitchNo consists
of a group of cell
addresses and
Indicates whether
to configure a band
class for a UE. If
this parameter is
set to CFG, the UE
sends a location
update request to
the CDMA2000
1xRTT system
when the UE finds LOFD-001035 /
that the current NO NO NO TDLOFD-001035
band class is TDLOFD-001090
different from the
band class pre-
registered the last
time. For details,
see the description
of
BAND_CLASSInclu
ded in 3GPP2
C.S0097.
Indicates the band
class that a UE can
pre-register at. If
this parameter is
set to CFG, the UE
sends a location
update request to
the CDMA2000
1xRTT system LOFD-001035 /
when the UE finds NO NO NO TDLOFD-001035
that the current TDLOFD-001090
band class is
different from the
band class pre-
registered the last
time. For details,
see the description
of BAND_CLASS in
3GPP2 C.S0097.

Indicates whether
the CDMA2000
1xRTT CSFB
registration
parameters need to
be set. If this
parameter is set to
CFG, the
CDMA2000 1xRTT
circuit-switched
fallback (CSFB) LOFD-001035 /
registration NO NO NO TDLOFD-001035
parameters need to TDLOFD-001090
be set. If this
parameter is set to
NOT_CFG, the
CDMA2000 1xRTT
CSFB registration
parameters do not
need to be set and
the parameters are
not broadcast in
SIB8.

Indicates whether
multiple system IDs
(SIDs) can be
stored. That is,
whether UEs are
LOFD-001035 /
allowed to store
NO NO NO TDLOFD-001035
SID_NID_LIST that
TDLOFD-001090
contains different
SIDs. For details
about this
parameter, see
3GPP TS 36.331.
Indicates whether
multiple network
IDs (NIDs) can be
stored. That is,
whether UEs are
allowed to store LOFD-001035 /
SID_NID_LIST that NO NO NO TDLOFD-001035
contains the same TDLOFD-001090
SID but different
NIDs. For details
about this
parameter, see
3GPP TS 36.331.

Indicates whether a
non-roaming UE is
allowed to register
at the current
system. If this
parameter is set to
BOOLEAN_TRUE
and
MOB_TERM_HOM
E in the UE is set to
BOOLEAN_TRUE,
the UE can
automatically
register at the
current system.
MOB_TERM_HOM LOFD-001035 /
E indicates whether NO NO NO TDLOFD-001035
a UE can be called TDLOFD-001090
in the home PLMN.
Automatic
registration can be
power-on
registration, power-
off registration,
periodic
registration, zone-
based registration,
or distance-based
registration. For
details, see the
description of
homeReg in 3GPP
TS 36.331.
Indicates whether a
UE roaming from
another system is
allowed to register
at the current
system. If this
parameter is set to
BOOLEAN_TRUE
and LOFD-001035 /
MOB_TERM_FOR_ NO NO NO TDLOFD-001035
SID in the UE is set TDLOFD-001090
to 1, the UE can
automatically
register at the
current system. For
details, see the
description of
foreignSIDReg in
3GPP TS 36.331.

Indicates whether a
UE roaming from
another network is
allowed to register
at the current
network. If this
parameter is set to
LOFD-001035 /
BOOLEAN_TRUE,
NO NO NO TDLOFD-001035
the UE can
TDLOFD-001090
automatically
register at the
current network. For
details, see the
description of
foreignNIDReg in
3GPP TS 36.331.
Indicates whether a
UE can initiate
automatic
registration when
some of its
parameters are
changed or when it
enters a new
system. If this
parameter is set to
LOFD-001035 /
BOOLEAN_TRUE,
NO NO NO TDLOFD-001035
automatic
TDLOFD-001090
registration is
allowed. If this
parameter is set to
BOOLEAN_FALSE,
automatic
registration is not
allowed. For details,
see the description
of parameterReg in
3GPP TS 36.331.

Indicates whether
power-on
registration is
allowed, that is,
whether a UE can
initiate automatic
registration
immediately after
being powered on
and receiving a
system message. If
this parameter is
set to
BOOLEAN_TRUE,
the UE can initiate
automatic
LOFD-001035 /
registration. If this
NO NO NO TDLOFD-001035
parameter is set to
TDLOFD-001090
BOOLEAN_FALSE,
the UEs cannot
initiate automatic
registration. To
prevent frequent
registration due to
immediate power-
off after power-on,
the UE can initiate
registration 20
seconds after it
enters the idle
mode. For details,
see the description
of powerUpReg in
3GPP TS 36.331.
Indicates the
CDMA2000 1xRTT
registration period.
If this parameter is
set to 0, the UE
does not perform
time-based
registration. If this
parameter is set to
LOFD-001035 /
a value in the range
NO NO NO TDLOFD-001035
from 29 to 85, the
TDLOFD-001090
period can be
calculated using the
following formula:
[2^(Registration
period/4)] × 0.08s.
For details, see the
description of
registrationPeriod in
3GPP TS 36.331.

Indicates the
CDMA2000 1xRTT
registration zone.
This parameter, the
system ID, and the
network ID together
uniquely identify a
CDMA2000
registration zone.
This parameter is LOFD-001035 /
used for NO NO NO TDLOFD-001035
registration-zone- TDLOFD-001090
based registration.
Registration zones
are planned based
on actual network
conditions. For
details, see the
description of
registrationZone in
3GPP TS 36.331.
Indicates the total
number of
CDMA2000 1xRTT
registration zones
to be retained. If
this parameter is
set to 0,
registration-zone-
based registration
is disabled. If this
parameter is set to LOFD-001035 /
a value greater than NO NO NO TDLOFD-001035
1, UEs do not TDLOFD-001090
frequently switch
between
registration zones.
However, this
results in delayed
location updates.
For details, see the
description of
totalZone in 3GPP
TS 36.331.
registration zone
code contained in
an SPM message
to a registration
zone list. If the UE
does not receive
any message from
a registration zone
within the timer
length, the UE
deletes this
registration zone
code. This timer
takes effect only if
the number of
retained registration
zones is not 0. This
parameter is used
LOFD-001035 /
for registration-
NO NO NO TDLOFD-001035
zone-based
TDLOFD-001090
registration. The
parameter values 0
to 7 indicate 1, 2, 5,
10, 20, 30, 45, and
60 minutes,
respectively. To
reduce the impact
on paging when the
number of retained
registration zones is
greater than 1, you
are advised to set
this timer to a small
value, for example,
1. If the number of
retained registration
zones is 1, this
timer does not take
Indicates whether a
CDMA2000 1xRTT
UE needs to initiate
registration during LOFD-001035 /
power-off. For NO NO NO TDLOFD-001035
details, see the TDLOFD-001090
description of
powerDownReg-r9
in 3GPP TS 36.331.

Indicates whether
access class LOFD-001035 /
barring for NO NO NO TDLOFD-001035
CDMA2000 1xRTT TDLOFD-001090
is configured.

persistence value
for common call
access overload
classes 0 to 9 and
determines the
threshold P for
performing
continuity checks
by UEs. A UE must
pass the continuity
check to access the
network. For
details, see IS95A-
C6. In each timeslot
after the RS, the
UE performs a
pseudorandom
continuity check
LOFD-001035 /
based on
NO NO NO TDLOFD-001035
parameter P. During
TDLOFD-001090
each timeslot, a
random value RP
ranging from 0 to 1
is generated. If RP
is less than P, the
UE passes the
check. Then, the
UE sends the first
probe of the access
sequence in the
timeslot. If the
check fails, the UE
needs to perform
the check in the
next timeslot. For
details, see the
description of ac-
Barring0to9-r9 in
Indicates the
persistence value
for access overload
class 10. The
persistence values
for emergency call
access overload
LOFD-001035 /
classes 10 to 15
NO NO NO TDLOFD-001035
determine the
TDLOFD-001090
threshold P for
performing
continuity checks
by UEs. For details,
see the description
of ac-Barring10-r9
in 3GPP TS 36.331.

Indicates the
persistence value
for access overload
class 11. The
persistence values
for emergency call
access overload
LOFD-001035 /
classes 10 to 15
NO NO NO TDLOFD-001035
determine the
TDLOFD-001090
threshold P for
performing
continuity checks
by UEs. For details,
see the description
of ac-Barring11-r9
in 3GPP TS 36.331.

Indicates the
persistence value
for access overload
class 12. The
persistence values
for emergency call
access overload
LOFD-001035 /
classes 10 to 15
NO NO NO TDLOFD-001035
determine the
TDLOFD-001090
threshold P for
performing
continuity checks
by UEs. For details,
see the description
of ac-Barring12-r9
in 3GPP TS 36.331.
Indicates the
persistence value
for access overload
class 13. The
persistence values
for emergency call
access overload
LOFD-001035 /
classes 10 to 15
NO NO NO TDLOFD-001035
determine the
TDLOFD-001090
threshold P for
performing
continuity checks
by UEs. For details,
see the description
of ac-Barring13-r9
in 3GPP TS 36.331.

Indicates the
persistence value
for access overload
class 14. The
persistence values
for emergency call
access overload
LOFD-001035 /
classes 10 to 15
NO NO NO TDLOFD-001035
determine the
TDLOFD-001090
threshold P for
performing
continuity checks
by UEs. For details,
see the description
of ac-Barring14-r9
in 3GPP TS 36.331.

Indicates the
persistence value
for access overload
class 15. The
persistence values
for emergency call
access overload
LOFD-001035 /
classes 10 to 15
NO NO NO TDLOFD-001035
determine the
TDLOFD-001090
threshold P for
performing
continuity checks
by UEs. For details,
see the description
of ac-Barring15-r9
in 3GPP TS 36.331.
Indicates the
persistence
amendment value
sent in access
attempt messages.
In the access
attempt indicated LOFD-001035 /
by the message, NO NO NO TDLOFD-001035
the value of (P x 2 - TDLOFD-001090
MSG_PSIST) and
RP will be
compared. For
details, see ac-
BarringMsg-r9 in
3GPP TS 36.331.

Indicates the
autonomously
registered
persistence
LOFD-001035 /
amendment value
NO NO NO TDLOFD-001035
for the access
TDLOFD-001090
barring factor. For
details, see ac-
BarringReg-r9 in
3GPP TS 36.331.

Indicates the
persistence value
for emergency calls
by UEs belonging
to access overload
classes 0 to 9. If
PSISTEMGINCL is
set to 0, AcBarEmg
is invalid. If
PSISTEMGINCL is
set to 1, set
AcBarEmg based
LOFD-001035 /
on whether UEs
NO NO NO TDLOFD-001035
belonging to access
TDLOFD-001090
overload classes 0
to 9 are allowed to
send emergency
call requests on the
access channel. If
allowed, set
AcBarEmg to 0. If
not allowed, set
AcBarEmg to 7. For
details, see ac-
BarringEmg-r9 in
3GPP TS 36.331.
Indicates whether
to configure the
latest CDMA2000
1xRTT protocol LOFD-001035 /
revision supported NO NO NO TDLOFD-001035
by the eNodeB. For TDLOFD-001090
details about this
parameter, see
3GPP2 C.S0097.

Indicates the latest

CDMA2000 1xRTT
protocol revision
supported by the
eNodeB. If the
latest protocol
LOFD-001035 /
revision is required
NO NO NO TDLOFD-001035
by some features,
TDLOFD-001090
change the protocol
revision as
required. For details
about this
parameter, see
3GPP2 C.S0097.

Indicates whether
to configure the
CDMA2000 1xRTT
LOFD-001035 /
minimum protocol
NO NO NO TDLOFD-001035
revision level. For
TDLOFD-001090
details about this
parameter, see
3GPP2 C.S0097.

Indicates the
minimum protocol
revision that UEs
LOFD-001035 /
need to support to
NO NO NO TDLOFD-001035
access the system.
TDLOFD-001090
For details about
this parameter, see
3GPP2 C.S0097.

Indicates whether
to include
LOFD-001035 /
authentication. For
NO NO NO TDLOFD-001035
details about this
TDLOFD-001090
parameter, see
3GPP2 C.S0097.
Indicates whether
to perform
LOFD-001035 /
authentication. For
NO NO NO TDLOFD-001035
details about this
TDLOFD-001090
parameter, see
3GPP2 C.S0097.

Indicates whether
to configure the
maximum number
LOFD-001035 /
of alternative
NO NO NO TDLOFD-001035
service options. For
TDLOFD-001090
details about this
parameter, see
3GPP2 C.S0097.

Indicates the
maximum number
of alternative
service options that
can be included in
the Origination
Message (ORM)
and Page
LOFD-001035 /
Response Message
NO NO NO TDLOFD-001035
(PRM). This
TDLOFD-001090
parameter is valid
for UEs with
MOB_P_REV
greater than or
equal to 6. For
details about this
parameter, see
3GPP2 C.S0097.

Indicates whether
to configure the
preferred access
LOFD-001035 /
channel MS ID
NO NO NO TDLOFD-001035
type. For details
TDLOFD-001090
about this
parameter, see
3GPP2 C.S0097.

Indicates the
preferred access
channel MS ID LOFD-001035 /
type. For details NO NO NO TDLOFD-001035
about this TDLOFD-001090
parameter, see
3GPP2 C.S0097.
Indicates whether
the mobile country
code (MCC) is
delivered. If this
parameter is set to
CFG, the MCC is LOFD-001035 /
delivered at NO NO NO TDLOFD-001035
CDMA2000 1xRTT TDLOFD-001090
parameter
registration. For
details about this
parameter, see
3GPP2 C.S0097.

Indicates whether
the mobile network
code (MNC) is
delivered. If this
parameter is set to
CFG, the MNC is LOFD-001035 /
delivered at NO NO NO TDLOFD-001035
CDMA2000 1xRTT TDLOFD-001090
parameter
registration. For
details about this
parameter, see
3GPP2 C.S0097.

Indicates whether
IMSI_Ts are
LOFD-001035 /
supported. For
NO NO NO TDLOFD-001035
details about this
TDLOFD-001090
parameter, see
3GPP2 C.S0097.
Indicates whether
15-digit IMSI_T are
supported. If
IMSI_T_SUPPORT
ED in ESPM is set
to 1 and the IMSI_T
is correctly set in
the UE, the UE
reports IMSI_T. If
IMSI_T_SUPPORT
ED is set to 1 but LOFD-001035 /
the IMSI_T is not NO NO NO TDLOFD-001035
set in the UE, the TDLOFD-001090
UE may report an
incorrect IMSI.
When you modify
this parameter,
ensure that the true
IMSI is correctly set
for the UE. For
details about this
parameter, see
3GPP2 C.S0097.

Indicates whether
power control
parameters are
carried by UEs from
LOFD-001035 /
the LTE network to
NO NO NO TDLOFD-001035
the CDMA2000
TDLOFD-001090
1xRTT network. For
details about this
parameter, see
3GPP2 C.S0097.

Indicates the initial

setpoint for RC3
used for UE-
performed forward LOFD-001035 /
FCH outer-loop NO NO NO TDLOFD-001035
power control. For TDLOFD-001090
details about this
parameter, see
3GPP2 C.S0097.

Indicates the initial

setpoint for RC4
used for UE-
performed forward LOFD-001035 /
FCH outer-loop NO NO NO TDLOFD-001035
power control. For TDLOFD-001090
details about this
parameter, see
3GPP2 C.S0097.
Indicates the initial
setpoint for RC5
used for UE-
performed forward LOFD-001035 /
FCH outer-loop NO NO NO TDLOFD-001035
power control. For TDLOFD-001090
details about this
parameter, see
3GPP2 C.S0097.

Indicates the initial

setpoint for RC11
used for UE-
performed forward LOFD-001035 /
channel outer-loop NO NO NO TDLOFD-001035
power control. For TDLOFD-001090
details about this
parameter, see
3GPP2 C.S0097.

Indicates the initial

setpoint for RC12
used for UE-
performed forward LOFD-001035 /
FCH outer-loop NO NO NO TDLOFD-001035
power control. For TDLOFD-001090
details about this
parameter, see
3GPP2 C.S0097.

Indicates whether
to configure the
pilot PN sequence
LOFD-001035 /
offset index
NO NO NO TDLOFD-001035
increment. For
TDLOFD-001090
details about this
parameter, see
3GPP2 C.S0097.
Indicates the pilot
pseudo noise (PN)
sequence offset
index increment.
The value of this
parameter is a
greatest common
divisor for pilot PN
sequence offsets of
all adjacent base
LOFD-001035 /
stations. For a
NO NO NO TDLOFD-001035
given pilot PN
TDLOFD-001090
sequence offset
index increment,
the number of PNs
available in the
system is 512
divided by the value
of this parameter.
For details about
this parameter, see
3GPP2 C.S0097.

Indicates whether
the leap second is
included in a pre-
registration
message. When
LOFD-001035 /
this parameter is
NO NO NO TDLOFD-001035
set to CFG, the
TDLOFD-001090
eNodeB
automatically
calculates the leap
second value based
on the system time.

Indicates whether
to configure the
time zone. If this
parameter is set to
CFG, the eNodeB
uses the DST
LOFD-001035 /
information
NO NO NO TDLOFD-001035
configured by
TDLOFD-001090
running the SET TZ
command. For
details, see the
description of
LTM_OFF_Included
in 3GPP2 C.S0097.
Indicates whether
to configure the
daylight saving time
(DST) information.
If this parameter is
set to CFG, the
eNodeB uses the LOFD-001035 /
DST information NO NO NO TDLOFD-001035
configured by TDLOFD-001090
running the SET TZ
command. For
details, see the
description of
DAYLT_Included in
3GPP2 C.S0097.

Indicates whether
to configure the
GCSNA L2
acknowledge timer.
If a timer length LOFD-001035 /
needs to be NO NO NO TDLOFD-001035
specified, set this TDLOFD-001090
parameter to CFG.
For details about
this parameter, see
3GPP2 C.S0097.

Indicates the length

of the GCSNA L2
timer for responding
to the
GCSNA1xCircuitSe
rvice message. It is
recommended that
this parameter be
set to a value less
than or equal to the LOFD-001035 /
GcsnaSeqContextTi NO NO NO TDLOFD-001035
mer parameter TDLOFD-001090
value. Otherwise,
the UE does not
resend the
GCSNA1xCircuitSe
rvice message. For
details, see the
description of
GCSNAL2AckTimer
in 3GPP2 C.S0097.
Indicates whether
to configure the
GCSNA sequence
context timer. If a
timer length needs LOFD-001035 /
to be specified, set NO NO NO TDLOFD-001035
this parameter to TDLOFD-001090
CFG. For details
about this
parameter, see
3GPP2 C.S0097.

Indicates the length

of the timer for
retransmitting the
GCSNA1xCircuitSe
rvice message.
After the timer
expires, the
message will not be
retransmitted. It is
recommended that
this parameter be
LOFD-001035 /
set to a value
NO NO NO TDLOFD-001035
greater than the
TDLOFD-001090
GcsnaL2AckTimer
parameter value.
Otherwise, the UE
does not resend the
GCSNA1xCircuitSe
rvice message. For
details, see the
description of
GCSNASequenceC
ontextTimer in
3GPP2 C.S0097.

Indicates the ID of
the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the value
for SectorID104 of
the neighboring
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of 26
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
cannot begin with 0,
for example, the LOFD-001021 /
YES YES NO
value cannot be TDLOFD-001021
0x0123A.
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
uniquely identifies a
subnetwork in the
global scope and
SECTORID24
uniquely identifies
an EV-DO sector in
the subnetwork.
Indicates the value
for SectorID24 of
the neighboring
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of six
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
cannot begin with 0,
for example, the LOFD-001021 /
YES YES NO
value cannot be TDLOFD-001021
0x0123A.
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
uniquely identifies a
subnetwork in the
global scope and
SECTORID24
uniquely identifies
an EV-DO sector in
the subnetwork.

Indicates the band

class on which the
neighboring
CDMA2000 high
rate packet data LOFD-001021 /
YES YES NO
(HRPD) cell TDLOFD-001021
operates. For
details about this
parameter, see
3GPP TS 36.331.
Indicates the
frequency on which
the neighboring
CDMA2000 high
rate packet data LOFD-001021 /
YES YES NO
(HRPD) cell TDLOFD-001021
operates. For
details about this
parameter, see
3GPP TS 36.331.

Indicates whether
to permit or prohibit
LOFD-001021 /
handovers from the NO NO NO
TDLOFD-001021
local cell to the
neighboring cell.

Indicates whether
to permit or prohibit
LOFD-001021 /
removal of the
NO NO NO TDLOFD-001021
neighboring
LOFD-002002
relationship by
ANR.

Indicates whether
ANR with
neighboring LOFD-001021 /
CDMA2000 high NO NO NO TDLOFD-001021
rate packet data LOFD-002002
(HRPD) cells is
enabled.
Indicates the name LOFD-001021 /
NO NO NO
of the local cell. TDLOFD-001021

Indicates the name

of the neighboring LOFD-001021 /
NO NO NO
CDMA2000 HRPD TDLOFD-001021
cell.
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm. LOFD-001021 /
The MO removal is NO NO NO TDLOFD-001021
successful even if LOFD-002002
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added

Indicates the ID of
the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the mobile
country code (MCC)
of the CDMA2000
high rate packet
data (HRPD) pre-
registration
parameter.
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile LOFD-001021 /
YES YES NO
network code TDLOFD-001021
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of the
CDMA2000 high
rate packet data
(HRPD) pre-
registration
parameter.
A public land mobile
network (PLMN) ID
is comprised of a
LOFD-001021 /
mobile country YES YES NO
TDLOFD-001021
code (MCC) and an
MNC.
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates whether a
UE without valid
pre-registration is
allowed to initiate
high rate packet
data (HRPD) pre-
registration. If this
parameter is set to
BOOLEAN_TRUE,
the UE is allowed to LOFD-001021 /
NO NO NO
initiate the pre- TDLOFD-001021
registration. If this
parameter is set to
BOOLEAN_FALSE,
the UE is not
allowed to initiate
the pre-registration.
For details about
this parameter, see
3GPP TS 36.331.

Indicates whether
the measurement
configuration pre- LOFD-001021 /
NO NO NO
registration TDLOFD-001021
parameter is
configured.

Indicates whether
measurement
LOFD-001021 /
configuration pre- NO NO NO
TDLOFD-001021
registration is
allowed.

Indicates the ID of
the pre-registration
CDMA2000 HRPD
zone. This
parameter is used
to control the re-
registration of the LOFD-001021 /
NO NO NO
UE and is valid only TDLOFD-001021
when pre-
registration is
allowed. For details
about this
parameter, see
3GPP TS 36.331.
Indicates whether
the secondary pre-
registration zone ID
0 is configured. If
this parameter is
set to CFG, the
secondary pre-
registration zone ID
LOFD-001021 /
0 exists. If this NO NO NO
TDLOFD-001021
parameter is set to
NOT_CFG, the
secondary pre-
registration zone ID
0 does not exist.
For details about
this parameter, see
3GPP TS 36.331.

Indicates the
secondary pre-
registration zone ID
0. This parameter is
used to control the LOFD-001021 /
NO NO NO
re-registration of TDLOFD-001021
the UE. For details
about this
parameter, see
3GPP TS 36.331.

Indicates whether
the secondary pre-
registration zone ID
1 is configured. If
this parameter is
set to CFG, the
secondary pre-
registration zone ID
LOFD-001021 /
1 exists. If this NO NO NO
TDLOFD-001021
parameter is set to
NOT_CFG, the
secondary pre-
registration zone ID
1 does not exist.
For details about
this parameter, see
3GPP TS 36.331.
Indicates the
secondary pre-
registration zone ID
1. This parameter is
used to control the LOFD-001021 /
NO NO NO
re-registration of TDLOFD-001021
the UE. For details
about this
parameter, see
3GPP TS 36.331.

Indicates the ID of
the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the mobile

country code (MCC)
of the reference
CDMA2000 high
rate packet data
(HRPD) cell.
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
LOFD-001021 /
network code YES YES NO
TDLOFD-001021
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the mobile
network code
(MNC) of the
reference
CDMA2000 high
rate packet data
(HRPD) cell.
A public land mobile
network (PLMN) ID
is comprised of a
mobile country LOFD-001021 /
YES YES NO
code (MCC) and an TDLOFD-001021
MNC.
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the value
for SectorID104 of
the reference
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of 26
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
cannot begin with 0,
for example, the
value cannot be LOFD-001021 /
YES YES NO
0x0123A. TDLOFD-001021
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
uniquely identifies a
subnetwork in the
global scope and
SECTORID24
uniquely identifies
an EV-DO sector in
the subnetwork. For
details, see
C.S0024.
Indicates the value
for SectorID24 of
the reference
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of six
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
cannot begin with 0,
for example, the
value cannot be LOFD-001021 /
YES YES NO
0x0123A. TDLOFD-001021
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
uniquely identifies a
subnetwork in the
global scope and
SECTORID24
uniquely identifies
an EV-DO sector in
the subnetwork. For
details, see
C.S0024.
the reference
CDMA2000 high
rate packet data
(HRPD) cell that a
UE in the E-UTRAN
cell can pre-register
at. An E-UTRAN
cell may overlap
multiple CDMA2000
HRPD cells, for
example, when
three E-UTRAN
sectors and six
CDMA2000 HRPD
sectors cover the
same area.
Therefore, multiple
CDMA2000 HRPD
LOFD-
sector IDs can be
NO YES NO 001021/TDLOFD-
specified for an E-
001021
UTRAN cell, with
each CDMA2000
HRPD sector ID
configured with a
selection ratio.
During UE pre-
registration,
CDMA2000 HRPD
sector IDs are
selected based on
historical selection
ratios. Considering
the cellular network
structure, a
maximum of six
CDMA2000 HRPD
sector IDs can be
configured for a UE

Indicates the cell ID

of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the
neighboring
CDMA2000 band
class. Signals on a LOFD-001035 /
frequency within the TDLOFD-001035
band class can be YES YES NO LOFD-001021 /
obtained by UEs. TDLOFD-001021
For details, see the TDLOFD-001090
BandclassCDMA20
00 IE defined in
3GPP 36.331 6.3.4.
Indicates the
neighboring
CDMA2000
LOFD-001035 /
frequency of the
TDLOFD-001035
serving cell. For
YES YES NO LOFD-001021 /
details, see the IE
TDLOFD-001021
CDMA2000-
TDLOFD-001090
CarrierInfo in the
3GPP 36.331 6.3.4
protocol.

Indicates the
frequency-specific
offset of the local
cell to the
neighboring
CDMA2000 cell on
the frequency. A
LOFD-001035 /
larger value of this
TDLOFD-001035
parameter leads to
NO NO NO LOFD-001021 /
a higher probability
TDLOFD-001021
of triggering
TDLOFD-001090
measurement
reports. For details,
see the Q-
OffsetRangeInterRA
T IE defined in
section 6.3.4 in
3GPP TS 36.331.

Indicates whether
to set the size of
LOFD-001035 /
the CDMA2000
TDLOFD-001035
search window. If
NO NO NO LOFD-001021 /
this parameter is
TDLOFD-001021
set to NOT_CFG,
TDLOFD-001090
the default size (8)
is used.
Indicates the
search window size
to be used by the
UE for searching for LOFD-001035 /
the pilots of the TDLOFD-001035
neighboring NO NO NO LOFD-001021 /
CDMA2000 cells. TDLOFD-001021
For details, see the TDLOFD-001090
MeasObjectCDMA2
000 IE defined in
3GPP TS 36.331.

factor of the
CDMA2000
frequency.? If the
eNodeB selects
target frequencies
based on frequency
priorities in
handovers to
CDMA2000, this
parameter indicates
the priority of the
CDMA2000
frequency, whose
value has a positive
correlation with the
probability of the
neighboring LOFD-001035 /
CDMA2000 TDLOFD-001035
frequency being NO NO NO LOFD-001021 /
selected as the TDLOFD-001021
target frequency. If TDLOFD-001090
the eNodeB selects
target frequencies
based on scaling
factors in
handovers to
CDMA2000, this
parameter indicates
the scaling factor of
the CDMA2000
frequency, whose
value has a positive
correlation with the
probability of the
neighboring
CDMA2000
frequency being
Indicates the ID of a
cluster in Cloud BB
scenarios. When
static clusters are LOFD-070208
YES YES NO
configured, the TDLOFD-080203
value of this
parameter ranges
from 0 to 999.
Indicates the
feature type of a
cluster, which can
be CSPC, DL
TDLAOFD-081411
CoMP, or CAMC. If
TDLAOFD-110408
this parameter is
NO NO NO LOFD-070208
set to
TDLOFD-080203
DLCOMP(DLCOMP
TDLOFD-110206
) or CAMC(CAMC),
the cluster applies
only to LTE TDD
networks.

Indicates the ID of a
cluster in Cloud BB
scenarios. When
static clusters are LOFD-070208
YES YES NO
configured, the TDLOFD-080203
value of this
parameter ranges
from 0 to 999.

Indicates the mobile

country code (MCC)
of the cluster cell. A
public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
LOFD-070208
(MNC). The MCC YES YES NO
TDLOFD-080203
consists of three
digits. The MNC
consists of two to
three digits. For
example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the mobile
network code
(MNC) of the cluster
cell. A public land
mobile network
(PLMN) ID is
comprised of a
mobile country
code (MCC) and an LOFD-070208
YES YES NO
MNC. The MCC TDLOFD-080203
consists of three
digits. The MNC
consists of two to
three digits. For
example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the
eNodeB identity of
the cluster cell. It
uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity and the
eNodeB identity LOFD-070208
YES YES NO
(represented by the TDLOFD-080203
most significant 20
bits). The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details about
this parameter, see
3GPP TS 36.413.
Indicates the
identity of the local
cell. It uniquely
identifies a cell
within an eNodeB.
The 28-bit E-
UTRAN cell identity
is comprised of the
cell identity
(represented by the
least significant LOFD-070208
YES YES NO
eight bits) and the TDLOFD-080203
eNodeB identity.
The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details about
this parameter, see
3GPP TS 36.413.

Indicates
information about a NO NO YES None
cell in a cluster.
Indicates the status
of uplink CAMC in a
cell. This parameter NO NO YES None
applies only to LTE
TDD cells.
Indicates the mobile
country code (MCC)
of the local CSPC
cell.
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
network code
(MNC). YES YES NO LOFD-070208
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of the local
CSPC cell.
A public land mobile
network (PLMN) ID
is comprised of a
mobile country
code (MCC) and an
MNC. YES YES NO LOFD-070208
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the
eNodeB identity of
the local CSPC cell.
It uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity and the
eNodeB identity
YES YES NO LOFD-070208
(represented by the
most significant 20
bits). The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details about
this parameter, see
3GPP TS 36.413.

Indicates the cell

identity of the local
CSPC cell. It
uniquely identifies a
cell within an
eNodeB. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity
(represented by the
least significant YES YES NO LOFD-070208
eight bits) and the
eNodeB identity.
The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details about
this parameter, see
3GPP TS 36.413.
Indicates the mobile
country code (MCC)
of the neighboring
cell performing
sounding reference
signal (SRS)
measurements on
UEs in the local
CSPC cell.
A public land mobile
network (PLMN) ID
is comprised of an
YES YES NO LOFD-070208
MCC and a mobile
network code
(MNC).
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of the
neighboring cell
performing
sounding reference
signal (SRS)
measurements on
UEs in the local
CSPC cell.
A public land mobile
network (PLMN) ID
is comprised of a YES YES NO LOFD-070208
mobile country
code (MCC) and an
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the
eNodeB identity of
the neighboring cell
performing
sounding reference
signal (SRS)
measurements on
UEs in the local
CSPC cell. It
uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
YES YES NO LOFD-070208
comprised of the
cell identity and the
eNodeB identity
(represented by the
most significant 20
bits). The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details about
this parameter, see
3GPP TS 36.413.
Indicates the
identity of the
neighboring cell
performing
sounding reference
signal (SRS)
measurements on
UEs in the local
CSPC cell under
the same eNodeB.
It uniquely identifies
a cell within an
eNodeB. The 28-bit
E-UTRAN cell
identity is
YES YES NO LOFD-070208
comprised of the
cell identity
(represented by the
least significant
eight bits) and the
eNodeB identity.
The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details about
this parameter, see
3GPP TS 36.413.

Indicates the ID of
the static CSPC
YES YES NO LOFD-070208
cluster in a Cloud
BB scenario.

Indicates the ID of
the static CSPC
YES YES NO LOFD-070208
cluster in Cloud BB
scenarios.
Indicates the mobile
country code (MCC)
of the CSPC cluster
cell. A public land
mobile network
(PLMN) ID is
comprised of an
MCC and a mobile
network code
YES YES NO LOFD-070208
(MNC). The MCC
consists of three
digits. The MNC
consists of two to
three digits. For
example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of the CSPC
cluster cell. A public
land mobile network
(PLMN) ID is
comprised of a
mobile country
code (MCC) and an
YES YES NO LOFD-070208
MNC. The MCC
consists of three
digits. The MNC
consists of two to
three digits. For
example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the
eNodeB identity of
the CSPC cluster
cell. It uniquely
identifies an
eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity and the
eNodeB identity YES YES NO LOFD-070208
(represented by the
most significant 20
bits). The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details about
this parameter, see
3GPP TS 36.413.

Indicates the
identity of the local
CSPC cell. It
uniquely identifies a
cell within an
eNodeB. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity
(represented by the
least significant YES YES NO LOFD-070208
eight bits) and the
eNodeB identity.
The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details about
this parameter, see
3GPP TS 36.413.
Indicates the mobile
country code of the
external cell.
A PLMN ID is
comprised of an
MCC and an MNC. LOFD-001036 /
The MCC consists TDLOFD-001036
of three digits. YES YES NO LOFD-001037 /
The MNC consists TDLOFD-001037
of two to three LOFD-070206
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates the mobile

network code of the
external cell.
A PLMN ID is
comprised of an
MCC and an MNC. LOFD-001036 /
The MCC consists TDLOFD-001036
of three digits. YES YES NO LOFD-001037 /
The MNC consists TDLOFD-001037
of two to three LOFD-070206
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates the
eNodeB identity of
the external E-
UTRAN cell. It
uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity and the
YES YES NO None
eNodeB identity
(represented by the
most significant 20
bits). The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
3GPP TS 36.413.
Indicates the cell
identity of the
external E-UTRAN
cell. It uniquely
identifies a cell
within an eNodeB.
The 28-bit E-
UTRAN cell identity
is comprised of the
cell identity LOFD-001036 /
(represented by the TDLOFD-001036
YES YES NO
least significant LOFD-001037 /
eight bits) and the TDLOFD-001037
eNodeB identity.
The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
3GPP TS 36.413.

Indicates the mobile

country code of the
external E-UTRAN
cell that is shared
among multiple
operators.
A PLMN ID is
LOFD-001036 /
comprised of an
TDLOFD-001036
MCC and an MNC.
YES YES NO LOFD-001037 /
The MCC consists
TDLOFD-001037
of three digits.
LOFD-070206
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.
Indicates the mobile
network code of the
external E-UTRAN
cell that is shared
among multiple
operators.
A PLMN ID is
LOFD-001036 /
comprised of an
TDLOFD-001036
MCC and an MNC.
YES YES NO LOFD-001037 /
The MCC consists
TDLOFD-001037
of three digits.
LOFD-070206
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates the
identity of the LOFD-001036 /
external GERAN TDLOFD-001036
YES YES NO
cell. It uniquely LOFD-001037 /
identifies a GERAN TDLOFD-001037
cell within a PLMN.

LOFD-001036 /
Indicates the LAC
TDLOFD-001036
of the external YES YES NO
LOFD-001037 /
GERAN cell.
TDLOFD-001037

Indicates the mobile

country code of the
external cell.
A PLMN ID is
comprised of an
MCC and an MNC.
LOFD-001036 /
The MCC consists
TDLOFD-001036
of three digits. YES YES NO
LOFD-001037 /
The MNC consists
TDLOFD-001037
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.
Indicates the mobile
network code of the
external cell.
A PLMN ID is
comprised of an
MCC and an MNC.
LOFD-001036 /
The MCC consists
TDLOFD-001036
of three digits. YES YES NO
LOFD-001037 /
The MNC consists
TDLOFD-001037
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates the mobile

country code of the
external GERAN
cell that is shared
among multiple
operators.
A PLMN ID is
comprised of an LOFD-001036 /
MCC and an MNC. TDLOFD-001036
YES YES NO
The MCC consists LOFD-001037 /
of three digits. TDLOFD-001037
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates the mobile

network code of the
external GERAN
cell that is shared
among multiple
operators.
A PLMN ID is
comprised of an LOFD-001036 /
MCC and an MNC. TDLOFD-001036
YES YES NO
The MCC consists LOFD-001037 /
of three digits. TDLOFD-001037
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.
Indicates the mobile
country code of the
external UTRAN
cell.
A PLMN ID is
comprised of an
MCC and an MNC. LOFD-001036 /
The MCC consists TDLOFD-001036
YES YES NO
of three digits. LOFD-001037 /
The MNC consists TDLOFD-001037
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates the mobile

network code of the
external UTRAN
cell.
A PLMN ID is
comprised of an
MCC and an MNC. LOFD-001036 /
The MCC consists TDLOFD-001036
YES YES NO
of three digits. LOFD-001037 /
The MNC consists TDLOFD-001037
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.
mode. The 28-bit
UTRAN cell ID is
comprised of the
RNC ID and the
RNC cell ID. If the
RNC ID is
represented in the
RNC-ID mode, the
28-bit UTRAN cell
ID is comprised of
the RNC ID and the
RNC cell ID that are
represented by the
most significant 12
bits and the least
significant 16 bits,
respectively. In this
case, the formula LOFD-001036 /
for calculating the TDLOFD-001036
YES YES NO
UTRAN cell ID is as LOFD-001037 /
follows: UTRAN cell TDLOFD-001037
ID = RNC ID x
65536 + RNC cell
ID. If the RNC ID is
represented in the
extended RNC-ID
mode, the 28-bit
UTRAN cell ID is
comprised of the
RNC ID and the
RNC cell ID that are
represented by the
most significant 16
bits and the least
significant 12 bits,
respectively. In this
case, the formula
for calculating the
represented in the
RNC-ID or
extended RNC-ID
mode. If the RNC
ID is represented in
the RNC-ID mode,
the 28-bit UTRAN
cell ID is comprised
of the RNC ID and
the RNC cell ID that
are represented by
the most significant
12 bits and the
least significant 16
bits, respectively. In
this case, the
formula for
LOFD-001036 /
calculating the
TDLOFD-001036
UTRAN cell ID is as YES YES NO
LOFD-001037 /
follows: UTRAN cell
TDLOFD-001037
ID = RNC ID x
65536 + RNC cell
ID. If the RNC ID is
represented in the
extended RNC-ID
mode, the 28-bit
UTRAN cell ID is
comprised of the
RNC ID and the
RNC cell ID that are
represented by the
most significant 16
bits and the least
significant 12 bits,
respectively. In this
case, the formula
for calculating the

Indicates the mobile

country code of the
external UTRAN
cell that is shared
among multiple
operators.
A PLMN ID is
comprised of an LOFD-001036 /
MCC and an MNC. TDLOFD-001036
YES YES NO
The MCC consists LOFD-001037 /
of three digits. TDLOFD-001037
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.
Indicates the mobile
network code of the
external UTRAN
cell that is shared
among multiple
operators.
A PLMN ID is
comprised of an LOFD-001036 /
MCC and an MNC. TDLOFD-001036
YES YES NO
The MCC consists LOFD-001037 /
of three digits. TDLOFD-001037
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates the value

for SectorID104 of
the external
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of 26
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
cannot begin with 0,
for example, the LOFD-001021 /
YES YES NO
value cannot be TDLOFD-001021
0x0123A.
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
uniquely identifies a
subnetwork in the
global scope and
SECTORID24
uniquely identifies
an EV-DO sector in
the subnetwork.
Indicates the value
for SectorID24 of
the external
CDMA2000 high
rate packet data
(HRPD) cell. The
value begins with
0x followed by a
maximum of six
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
cannot begin with 0,
for example, the LOFD-001021 /
YES YES NO
value cannot be TDLOFD-001021
0x0123A.
SECTORID128
uniquely identifies
an EV-DO sector in
the global scope
and is comprised of
SECTORID104 and
SECTORID24.
SECTORID104
uniquely identifies a
subnetwork in the
global scope and
SECTORID24
uniquely identifies
an EV-DO sector in
the subnetwork.

Indicates the band

class on which the
external
CDMA2000 high
rate packet data LOFD-001021 /
YES YES NO
(HRPD) cell TDLOFD-001021
operates. For
details about this
parameter, see
3GPP TS 36.331.
Indicates the
frequency on which
the external
CDMA2000 high
rate packet data LOFD-001021 /
YES YES NO
(HRPD) cell TDLOFD-001021
operates. For
details about this
parameter, see
3GPP TS 36.331.

Indicates the mobile

country code (MCC)
of the external
CDMA2000 high
rate packet data
(HRPD) cell.
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
LOFD-001021 /
network code NO YES NO
TDLOFD-001021
(MNC).
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of the
external
CDMA2000 high
rate packet data
(HRPD) cell.
A public land mobile
network (PLMN) ID
is comprised of a
mobile country LOFD-001021 /
NO YES NO
code (MCC) and an TDLOFD-001021
MNC.
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the
pseudo noise (PN)
sequence number
of the external
CDMA2000 high
rate packet data
LOFD-001021 /
(HRPD) cell. This NO YES NO
TDLOFD-001021
number is used as
the physical cell ID
of the cell. For
details, see
C.S0005
PILOT_PN.

Indicates the name

of the external LOFD-001021 /
NO NO NO
CDMA2000 HRPD TDLOFD-001021
cell.
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm. LOFD-001021 /
The MO removal is NO NO NO TDLOFD-001021
successful even if LOFD-002002
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
Indicates the cell ID
of the external
CDMA2000 1xRTT
cell. The cell ID and
sector ID together
uniquely identify a
CDMA2000 cell in
the mobile
switching center LOFD-001090 /
YES YES NO
(MSC). In the TDLOFD-001090
CDMA2000 1xRTT
network, a cell ID
uniquely identifies a
cell within the
mobile switching
center (MSC). A cell
ID consists of 12
bits.
Indicates the sector
ID of the external
CDMA2000 1xRTT
cell. The cell ID and
sector ID together
uniquely identify a
LOFD-001090 /
CDMA2000 cell in YES YES NO
TDLOFD-001090
the mobile
switching center
(MSC). A sector ID
is unique in a
CDMA2000 cell and
consists of four bits.

Indicates the band

class on which the
external
CDMA2000 1x
radio transmission LOFD-001090 /
YES YES NO
technology (1xRTT) TDLOFD-001090
cell operates. For
details about this
parameter, see
3GPP TS 36.331.

Indicates the
frequency on which
the external
CDMA2000 1xRTT LOFD-001090 /
YES YES NO
cell operates. For TDLOFD-001090
details about this
parameter, see
3GPP TS 36.331.

Indicates the
system ID of the
external
CDMA2000 1xRTT
cell. A system ID is
assigned to each
local mobile LOFD-001090 /
YES YES NO
network and is used TDLOFD-001090
to determine
whether a UE is in
the roaming state.
For details about
this parameter, see
3GPP TS 36.331.
Indicates the ID of
the network to
which the external
CDMA2000 1xRTT
cell belongs. A base
station is a cellular
system and a
member of the
network. A network
is a subset of a
system that is
identified by a
system ID. A
network in a system
is identified by a
network ID. A
system ID and a
network ID together
LOFD-001090 /
uniquely identify a YES YES NO
TDLOFD-001090
network. System ID
0 and network ID 0
indicate all base
stations outside a
specified network
and are reserved
values. Network ID
65535 is also
reserved; this ID
indicates that the
roaming status of
UEs is non-roaming
in the whole system
no matter what the
network ID is. For
details, see the
description of NID
in 3GPP2 C.S0005.

Indicates the mobile

country code (MCC)
of the external
CDMA2000 1xRTT
cell.
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
network code LOFD-001090 /
NO YES NO
(MNC). TDLOFD-001090
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
Indicates the mobile
network code
(MNC) of the
external
CDMA2000 1xRTT
cell.
A public land mobile
network (PLMN) ID
is comprised of a
mobile country
LOFD-001090 /
code (MCC) and an NO YES NO
TDLOFD-001090
MNC.
The MCC consists
of three digits.
The MNC consists
of two or three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
the reference
CDMA2000 1xRTT
cell belongs. The
value begins with
0x followed by a
maximum of 6
hexadecimal
characters (0 to 9,
and A to F), for
example, 0x123A.
The hexadecimal
character string
cannot begin with 0,
for example, the
value cannot be
0x0123A. An MSC
ID uniquely
identifies an MSC
LOFD-001090 /
and is determined NO NO NO
TDLOFD-001090
by the operator.
MSCID is defined in
TIA/EIA-41.5-D and
consists of
MarketID (2 bytes)
and SwitchNo (1
byte). MarketID is
described in
TIA/EIA TSB29 and
can be defined by
the operator. It can
be the SID or
another ID that can
differentiate
operators.
SwitchNo consists
of a group of cell
addresses and
Indicates the
pseudo noise (PN)
sequence number
of the external
CDMA2000 1xRTT
cell. This number is LOFD-001090 /
NO YES NO
used as the TDLOFD-001090
physical cell ID of
the cell. For details,
see the description
of PILOT_PN in
3GPP2 C.S0005.

Indicates the name

of the external LOFD-001090 /
NO NO NO
CDMA2000 1xRTT TDLOFD-001090
cell.

MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
LOFD-001090 /
the ANR algorithm.
TDLOFD-001090
The MO removal is NO NO NO
LOFD-002002 /
successful even if
TDLOFD-002002
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
Indicates the ID of
the Local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the cell ID

of the neighboring
CDMA2000 1xRTT
cell. The cell ID and
sector ID together
uniquely identify a
CDMA2000 cell in
the entire network. LOFD-001090 /
YES YES NO
In the CDMA2000 TDLOFD-001090
1xRTT network, a
cell ID uniquely
identifies a cell
within the mobile
switching center
(MSC). A cell ID
consists of 12 bits.

Indicates the sector

ID of the
neighboring
CDMA2000 1xRTT
cell. The cell ID and
sector ID together
LOFD-001090 /
uniquely identify a YES YES NO
TDLOFD-001090
CDMA2000 cell
within the MSC. A
sector ID is unique
in a CDMA2000 cell
and consists of 4
bits.

Indicates the band

class on which the
neighboring
CDMA2000 1xRTT LOFD-001090 /
YES YES NO
cell operates. For TDLOFD-001090
details about this
parameter, see
3GPP TS 36.331.
Indicates the
frequency on which
the neighboring
CDMA2000 1xRTT LOFD-001090 /
YES YES NO
cell operates. For TDLOFD-001090
details about this
parameter, see
3GPP TS 36.331.

Indicates the
system ID of the
neighboring
CDMA2000 1xRTT
cell. A system ID is
assigned to each
local mobile LOFD-001090 /
YES YES NO
network and is used TDLOFD-001090
to determine
whether a UE is in
the roaming state.
For details about
this parameter, see
3GPP TS 36.331.

Indicates the
network ID of the
neighboring
CDMA2000 1xRTT LOFD-001090 /
YES YES NO
cell. For details TDLOFD-001090
about this
parameter, see
3GPP TS 36.331.

Indicates whether
to permit or prohibit
LOFD-001090 /
handovers from the NO NO NO
TDLOFD-001090
local cell to the
neighboring cell.
Indicates whether
to permit or prohibit
LOFD-001090 /
removal of the
NO NO NO TDLOFD-001090
neighboring
LOFD-002002
relationship by
ANR.

Indicates whether
LOFD-001090 /
ANR with
NO NO NO TDLOFD-001090
CDMA2000 1xRTT
LOFD-002002
cells is enabled.

Indicates the name LOFD-001090 /

NO NO NO
of the local cell. TDLOFD-001090
Indicates the name
of the neighboring LOFD-001090 /
NO NO NO
CDMA2000 1xRTT TDLOFD-001090
cell.
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
LOFD-001090 /
the ANR algorithm.
TDLOFD-001090
The MO removal is NO NO NO
LOFD-002002 /
successful even if
TDLOFD-002002
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added

Indicates the cell ID

of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the
neighboring
CDMA2000 band
class. Signals on a LBFD-00201803 /
frequency within the TDLBFD-00201803
band class can be YES YES NO LOFD-001035 /
obtained by UEs. TDLOFD-001035
For details, see the TDLOFD-001090
BandclassCDMA20
00 IE defined in
3GPP 36.331.

Indicates whether
to configure cell
reselection priorities
for CDMA2000 LBFD-00201803 /
1xRTT band class. TDLBFD-00201803
If this parameter is NO NO NO LOFD-001035 /
set to NOT_CFG, TDLOFD-001035
the cell reselection TDLOFD-001090
priorities are not
delivered in the
system information.

Indicates the
absolute priority of
the CDMA2000
1xRTT band class
to be used during
cell reselection. The
value 0 indicates
LBFD-00201803 /
the lowest priority.
TDLBFD-00201803
Frequencies used
NO NO NO LOFD-001035 /
for different RATs
TDLOFD-001035
must be assigned
TDLOFD-001090
different cell
reselection
priorities. The
information is
contained in SIB8.
For details, see
3GPP TS 36.331.
Indicates the RX
signal level required
for a cell on a
frequency in the
higher-priority
CDMA2000 1xRTT
band class to
become a
candidate for cell
reselection. After
measurements are
LBFD-00201803 /
started for cells on
TDLBFD-00201803
a frequency in the
NO NO NO LOFD-001035 /
band class, a cell
TDLOFD-001035
on the frequency
TDLOFD-001090
can become a
candidate for
reselection only if
the RX signal level
of the cell is higher
than the value
specified by this
parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.304 5.2.4.5.

Indicates the RX
signal level required
for a cell on a
frequency in the
lower-priority
CDMA2000 1xRTT
band class to
become a
candidate for cell
reselection.
After
measurements are LBFD-00201803 /
started for cells on TDLBFD-00201803
a frequency in the NO NO NO LOFD-001035 /
band class, a cell TDLOFD-001035
on the frequency TDLOFD-001090
can become a
candidate for
reselection only if
the RX signal level
of the cell is better
than the value
specified by this
parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.304 5.2.4.5.
Indicates whether
to configure cell
reselection priorities
for CDMA2000
LBFD-00201803 /
HRPD band class.
TDLBFD-00201803
If this parameter is NO NO NO
LOFD-001021 /
set to NOT_CFG,
TDLOFD-001021
the cell reselection
priorities are not
delivered in the
system information.

Indicates the
absolute priority of
the CDMA2000
HRPD band class
to be used during
cell reselection. The
value 0 indicates
the lowest priority. LBFD-00201803 /
Frequencies used TDLBFD-00201803
NO NO NO
for different RATs LOFD-001021 /
must be assigned TDLOFD-001021
different cell
reselection
priorities. The
information is
contained in SIB8.
For details, see
3GPP TS 36.331.

Indicates the RX
signal level required
for a cell on a
frequency in the
higher-priority
CDMA2000 HRPD
band class to
become a
candidate for cell
reselection. After
measurements are
started for cells on LBFD-00201803 /
a frequency in the TDLBFD-00201803
NO NO NO
band class, a cell LOFD-001021 /
on the frequency TDLOFD-001021
can become a
candidate for
reselection only if
the RX signal level
of the cell is higher
than the value
specified by this
parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.304 5.2.4.5.
Indicates the RX
signal level required
for a cell on a
frequency in the
lower-priority
CDMA2000 HRPD
band class to
become a
candidate for cell
reselection.
After
measurements are
LBFD-00201803 /
started for cells on
TDLBFD-00201803
a frequency in the NO NO NO
LOFD-001021 /
band class, a cell
TDLOFD-001021
on the frequency
can become a
candidate for
reselection only if
the RX signal level
of the cell is lower
than the value
specified by this
parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.304 5.2.4.5.

Indicates the mobile

country code of the
external cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists LOFD-001020 /
YES YES NO
of three digits. TDLOFD-001020
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.

Indicates the mobile

network code of the
external cell.
The PLMN consists
of the MCC and the
MNC.
The MCC consists LOFD-001020 /
YES YES NO
of three digits. TDLOFD-001020
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.
Indicates the cell ID
of the external
GERAN cell. It
uniquely identifies a
GERAN cell within
LOFD-001020 /
the area specified YES YES NO
TDLOFD-001020
by the location area
identity (LAI). An
LAI consists of the
MCC, MNC, and
LAC.

Indicates the LAC

of the external
LOFD-001023 /
GERAN cell. It
YES YES NO TDLOFD-001023
uniquely identifies a
LOFD-001069
location within a
PLMN.

Indicates whether
to set the routing
area code (RAC) of
the external
GERAN cell. This
LOFD-001020 /
parameter is NO NO NO
TDLOFD-001020
required if the
external GERAN
cell supports packet
switched (PS)
services.

LOFD-001034 /
LOFD-001034
Indicates the
NO NO NO LOFD-001053
routing area code.
LOFD-001020 /
TDLOFD-001020
Indicates the
GERAN band
indicator. If the
GERAN ARFCN is
a value in the range
of 512 to 810, the
LOFD-001020 /
value of this
TDLOFD-001020
parameter is used
LOFD-001023 /
to indicate whether
TDLOFD-001023
the GERAN ARFCN
LOFD-001034 /
is in the 1800 MHz NO YES NO
TDLOFD-001034
band or the 1900
LOFD-001046 /
MHz band. If the
TDLOFD-001046
GERAN ARFCN is
LOFD-001073 /
not in either band,
TDLOFD-001073
this parameter does
not take effect and
can be set to either
value. For details,
see 3GPP TS
36.331.

Indicates the
GERAN BCCH
LOFD-001020 /
ARFCN. For details, NO YES NO
TDLOFD-001020
see 3GPP TS
45.005.

Indicates the
network color code
(NCC) of GERAN. It
is operator-specific
and identifies a
network within the
whole country.The
LOFD-001020 /
base transceiver NO YES NO
TDLOFD-001020
station identity code
(BSIC) consists of
the NCC and the
base station color
code (BCC). For
details, see 3GPP
TS 23.003.
Indicates the base
station color code
(BCC) of an
external GERAN
cell. This parameter
is used to
discriminate
external GERAN
cells working at the LOFD-001020 /
NO YES NO
same TDLOFD-001020
frequency.The base
transceiver station
identity code (BSIC)
consists of the BCC
and the network
color code (NCC).
For details, see
3GPP TS 23.003.
Indicates whether
the cell supports
the dual
transmission mode.
If the cell supports
the dual
transmission mode, LOFD-001020 /
both CS and PS TDLOFD-001020
NO NO NO
services can be LOFD-001046 /
handed over to the TDLOFD-001046
cell at the same
time. Otherwise,
only the CS service
or the PS service
can be handed over
to the cell.
Indicates the name
LOFD-001020 /
of the external NO NO NO
TDLOFD-001020
GERAN cell.

Indicates whether
the external
GERAN cell
supports single
radio voice call
continuity (SRVCC)
for concurrent CS
and PS services. If LOFD-001023 /
NO NO NO
this parameter is TDLOFD-001023
set to
BOOLEAN_FALSE,
the external
GERAN cell does
not support SRVCC
for concurrent CS
and PS services.
Indicates whether
an external GERAN
cell supports ultra-
flash CSFB to
GERAN. If this
parameter is set to
BOOLEAN_TRUE,
the external
GERAN cell
LOFD-081283 /
supports ultra-flash NO NO NO
TDLOFD-081203
CSFB to GERAN. If
this parameter is
set to
BOOLEAN_FALSE,
the external
GERAN cell does
not support ultra-
flash CSFB to
GERAN.
can be selected for
handovers during
roaming. This
parameter is set to
NO(No) by default.
If this parameter is
set to YES(Yes),
this neighboring cell
can be selected for
handovers during
roaming. If this
parameter is set to
NO(No), this
neighboring cell
cannot be selected
for handovers
during roaming.
If the PLMN of the
LOFD-00105401 /
neighboring cell is NO NO NO
TDLOFD-00105401
included in the
SPID-based
handover-allowable
HPLMN list or this
parameter is set to
YES(Yes), this
neighboring cell can
be selected for
handovers.
In the boundaries of
roaming areas and
non-roaming areas,
you are advised to
set this parameter
to YES(Yes) to
ensure that
neighboring cells in
roaming areas can
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
LOFD-002002 /
The MO removal is NO NO NO
TDLOFD-002002
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added

Indicates the cell ID

of the Local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the mobile
country code of the
neighboring
GERAN cell.
The PLMN consists
of the MCC and the
MNC.
LOFD-001020 /
The MCC consists YES YES NO
TDLOFD-001020
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.

Indicates the mobile

network code of the
neighboring
GERAN cell.
The PLMN consists
of the MCC and the
MNC.
LOFD-001020 /
The MCC consists YES YES NO
TDLOFD-001020
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.

LOFD-001023 /
Indicates the LAC
TDLOFD-001023
of the GERAN
LOFD-001053
neighboring cell. It
YES YES NO LOFD-001069
uniquely identifies a
LOFD-
location within a
001020/TDLOFD-
PLMN.
001020

Indicates the cell ID

of the GERAN
neighboring cell. It
uniquely identifies a
GERAN cell within
LOFD-001020 /
the area specified YES YES NO
TDLOFD-001020
by the location area
identity (LAI). An
LAI consists of the
MCC, MNC, and
LAC.
Indicates whether
to permit or prohibit
removal of the
NO NO NO LOFD-002002
neighboring
relationship by
ANR.
Indicates whether
handovers of UEs LOFD-001020 /
NO NO NO
to the neighboring TDLOFD-001020
cell are prohibited.
Indicates the
priority of the
neighboring cell
during blind
handovers. Blind
handover is a
process in which
the eNodeB
instructs a UE to
hand over to a LOFD-001020 /
specified TDLOFD-001020
neighboring cell. NO NO NO TDLOFD-001023
There are 32 TDLOFD-001034
priorities altogether. TDLOFD-001053
The priority has a
positive correlation
with the value of
this parameter.
Note that the value
0 indicates that
blind handovers to
the neighboring cell
are not allowed.
Indicates whether
this neighboring cell
LOFD-002002 /
is automatically NO NO NO
TDLOFD-002002
discovered by the
ANR algorithm.
 LOFD-002001 /
Indicates the name TDLOFD-002001
NO NO NO
of the local cell. LOFD-002002 /
TDLOFD-002002

Indicates the name LOFD-002001 /

of the GERAN NO NO NO TDLOFD-002001
neighboring cell. LOFD-002002
Indicates whether
the neighboring
GERAN cell
overlaps the E-
UTRAN cell. The
default value is NO.
The parameter
value YES indicates
that the neighboring
NO NO NO MRFD-231901
GERAN cell
overlaps the E-
UTRAN cell. The
parameter value
NO indicates that
the neighboring
GERAN cell does
not overlap the E-
UTRAN cell.

Indicates the
measurement
priority of the
neighboring
GERAN cell. A
larger value
indicates a higher
priority. The
measurement
priorities can be
periodically and
automatically
arranged based on LOFD-
the number of times 002002/TDLOFD-
that each 002002
NO NO NO
neighboring LOFD-
GERAN cell is 001053/TDLOFD-
measured. The 001053
neighboring
GERAN cells for
GERAN flash blind
redirections or
GERAN flash-
CSFB-based
redirections can be
selected based on
the measurement
priorities of
neighboring
GERAN cells.
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
LOFD-002002 /
The MO removal is NO NO NO
TDLOFD-002002
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
Indicates the
eNodeB ID defined
in the service
protocol interface,
which uniquely
NO NO YES None
identifies an
eNodeB within a
PLMN. For details,
see 3GPP TS
36.300.
Indicates the start
time of the latest
RIM procedure
NO NO YES None
towards the
neighboring
GERAN cell.
Indicates the time
of the latest RIM
request received by NO NO YES None
the neighboring
GERAN cell.
Indicates the cell ID
of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates a GERAN
carrier frequency
group. In the cell
reselection
procedure, the
GERAN carrier LBFD-00201803 /
frequencies are TDLBFD-00201803
YES YES NO
organized in groups LOFD-001020 /
and the cell TDLOFD-001020
reselection
parameters are
provided per group
of GERAN carrier
frequencies.

Indicates the
standard that is
LOFD-001020 /
supported by the NO YES NO
TDLOFD-001020
current carrier
frequency group.

Indicates the first

ARFCN in the
GERAN carrier
frequency group. If
the GERAN ARFCN LBFD-00201803 /
is not between 512 TDLBFD-00201803
NO YES NO
and 810, one LOFD-001020 /
ARFCN can only in TDLOFD-001020
one frequency
band. For details,
see 3GPP TS
45.005.
Indicates the
GERAN band
indicator. If the
GERAN ARFCN is
between 512 and
810, this parameter
indicates whether
the GERAN ARFCN
is in the 1800 MHz
band or the 1900 LBFD-00201803 /
MHz band. If the TDLBFD-00201803
NO YES NO
GERAN ARFCN is LOFD-001020 /
not in either band, TDLOFD-001020
this parameter does
not take effect and
can be set to either
value and one
ARFCN can only in
one frequency
band. For details,
see 3GPP TS
45.005.

Indicates whether
to set the
reselection priority
of the frequencies
in the GERAN
carrier frequency
group. For details LBFD-00201803 /
NO NO NO
about how UEs TDLBFD-00201803
process frequency
priorities during cell
reselection, see
section 5.2.4.1 of
3GPP TS 36.304
(V12.4.0).
on a frequency in
the GERAN carrier
frequency group
based on the value
of this parameter
and the absolute
priority of the
serving cell. If the
value of this
parameter is larger
than the absolute
priority of the
serving cell, the UE
starts
measurements on
neighboring cells on
the frequencies in
the GERAN carrier
frequency group; LBFD-00201803 /
NO NO NO
then if the signal TDLBFD-00201803
quality of some
neighboring cells
meets the related
conditions, the UE
starts cell
reselection. If the
value of this
parameter is
smaller than the
absolute priority of
the serving cell, the
UE starts the
measurements only
when the signal
quality of the
serving cell is poor;
then if the signal
quality of some
Indicates whether
to set the maximum
power that the UE
can apply to
transmission on a
frequency in the
GERAN carrier LOFD-001020 /
NO NO NO
frequency group. If TDLOFD-001020
the value of this
parameter is not
specified, the
maximum power is
subject to the UE
capability.
Indicates the
maximum power
that the UE can
apply to
transmission on a
frequency in the
GERAN carrier
frequency group. It
is used in cell
reselection criteria LBFD-00201803 /
NO NO NO
to calculate the TDLBFD-00201803
compensated
power. If the value
of this parameter is
not specified, the
maximum power is
subject to the UE
capability. For
details, see 3GPP
TS 36.304.

Indicates the
minimum GERAN
signal level required
for cell reselection
based on criteria S.
Assume that: Srxlev
= Measured RSSI
of a neighboring
cell on a frequency
in the GERAN
carrier frequency
group - Actual value
of this parameter -
Compensated LBFD-00201803 /
NO NO NO
power. If Srxlev is TDLBFD-00201803
consistently greater
than a specific
threshold for cell
reselection, the UE
reselects this
neighboring cell.
For details, see
3GPP TS 36.104.
Note: Actual value
of this parameter =
-115 + 2 x GUI
value of this
parameter
Indicates the RX
level required for a
neighboring cell on
a frequency in the
GERAN carrier
frequency group to
become a
candidate for
reselection if the
priority of the
frequency is higher
than that of the
serving frequency.
After
measurements are LBFD-00201803 /
NO NO NO
started for TDLBFD-00201803
neighboring cells on
a frequency in the
GERAN carrier
frequency group,
the UE reselects to
a cell on the
frequency only if
the RX level of the
cell is better than
the value specified
by this parameter
for a time-to-trigger.
For details, see
3GPP TS 36.104.
Indicates the RX
level required for a
neighboring cell on
a frequency in the
GERAN carrier
frequency group to
become a
candidate for
reselection if the
priority of the
frequency is lower
than that of the
serving frequency.
After
measurements are
started for
neighboring cells on LBFD-00201803 /
NO NO NO
a frequency in the TDLBFD-00201803
GERAN carrier
frequency group,
the UE reselects to
a cell on the
frequency only if
the RX level of the
serving cell is lower
than a specified
threshold and that
of the cell is better
than the value
specified by this
parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.104.

Indicates the
frequency offset of
the group of
neighboring
GERAN carrier
LOFD-001020 /
frequencies. This
TDLOFD-001020
parameter is used
NO NO NO TDLOFD-001023
in the decision of
TDLOFD-001034
the UE to send
TDLOFD-001053
measurement
reports for inter-
RAT handovers. For
details, see 3GPP
TS 36.331.
Indicates whether a
LBFD-00201803 /
BCCH carrier with
TDLBFD-00201803
the specific NCC is
LOFD-001020 /
permitted for NO NO NO
TDLOFD-001020
monitoring. For
TDLOFD-001046
details, see 3GPP
TDLOFD-001073
TS 36.331.

frequency group
priority based on
which the eNodeB
selects a target
frequency group for
blind redirection or
delivers a
frequency group in
measurement
configuration
messages. If a blind
redirection is
triggered and the
target neighboring
cell is not specified,
the eNodeB selects
a target frequency
LOFD-001020 /
group based on the
TDLOFD-001020
setting of this
NO NO NO TDLOFD-001023
parameter. If a
TDLOFD-001034
measurement
TDLOFD-001053
configuration is to
be delivered, the
eNodeB
preferentially
delivers the
frequency group
with the highest
priority. If this
parameter is set to
0 for a frequency
group, this
frequency group is
not selected as the
target frequency
group for a blind
redirection. A larger
value indicates a
Indicates whether
the coverage area
of a GERAN
frequency group is
continuous. The
parameter value
CONTINUOUS
indicates that the
coverage area is
continuous. The
parameter value
NON_CONTINUOU
S indicates that the
coverage area is NO NO NO None
non-continuous.
Only neighboring
GERAN cells
working at the
GERAN frequency
group that has
continuous
coverage are
considered in the
determination of
candidate cells for
blind CSFB to
GERAN.
Indicates whether a
neighboring
GERAN cell on the
GERAN frequency
is a shared
neighboring
GERAN cell. If this
parameter is set to
BOOLEAN_TRUE,
the GERAN
frequency is a
shared frequency,
and the shared
operator
information must be
checked on the
LOFD-
OSS before all
NO NO NO 002002/TDLOFD-
neighboring
002002
GERAN cells are
added. If this
parameter is set to
BOOLEAN_FALSE,
the GERAN
frequency is not a
shared frequency,
and the shared
operator
information does
not need to be
checked on the
OSS before all
neighboring
GERAN cells are
added.

Indicates whether
information about
external cells and
neighbor
relationships with
these cells on
frequencies in the
neighboring
GERAN frequency
group can be
LOFD-002002 /
maintained by ANR. NO NO NO
TDLOFD-002002
If this parameter is
set to ALLOWED,
the information can
be maintained by
ANR. If this
parameter is set to
NOT_ALLOWED,
the information
cannot be
maintained by ANR.
on GERAN
frequency priorities
and removes the
candidate neighbor
relationship with the
cell to which the
number of UEs
handed over from
the local cell is the
smallest.
Consider that all
values of this
parameter for all
GERAN
frequencies are the
same non-zero
value. If the
frequency serving
LOFD-002002 /
the cell whose NO NO NO
TDLOFD-002002
neighbor
relationship is to be
added has
neighboring cells
whose neighbor
relationships can be
removed, the
eNodeB removes
the neighbor
relationship with the
cell that operates
on this frequency
and to which the
number of UEs
handed over from
the local cell is the
smallest. If the
frequency does not

Indicates the cell ID

of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the index LBFD-00201803 /

of the BCCH carrier TDLBFD-00201803
frequency group. It LOFD-001020 /
YES YES NO
identifies a BCCH TDLOFD-001020
carrier frequency LBFD-002009 /
group. TDLBFD-002009
Specifies the
ARFCN of the
GERAN BCCH. If
the GERAN ARFCN LBFD-00201803 /
value is not TDLBFD-00201803
between 512 and LOFD-001020 /
YES YES NO
810, one ARFCN TDLOFD-001020
can only in one LBFD-002009 /
frequency band. TDLBFD-002009
For details about
this parameter, see
3GPP TS 45.005.

Indicates the cell ID

of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the
starting physical cell
LBFD-002009 /
ID of the intra-
TDLBFD-002009
frequency YES YES NO
LBFD-00201801 /
blacklisted cell. For
TDLBFD-00201801
details, see 3GPP
TS 36.331.

Indicates the name LBFD-00201803 /

of the intra- TDLBFD-00201803
NO NO NO
frequency LBFD-00201801 /
blacklisted cell. TDLBFD-00201801

Indicates the
physical cell ID
LBFD-002009 /
range of the intra-
TDLBFD-002009
frequency NO NO NO
LBFD-00201801 /
blacklisted cell. For
TDLBFD-00201801
details, see 3GPP
TS 36.331.
Indicates the cell ID
of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the mobile

country code of the
E-UTRAN
neighboring cell.
The PLMN consists
of the MCC and the
MNC.
LBFD-00201801 /
The MCC consists YES YES NO
TDLBFD-00201801
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.

Indicates the mobile

network code of the
E-UTRAN
neighboring cell.
The PLMN consists
of the MCC and the
MNC.
LBFD-00201801 /
The MCC consists YES YES NO
TDLBFD-00201801
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.
Indicates the
eNodeB identity of
the intra-frequency
neighboring cell. It
uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity and the
YES YES NO None
eNodeB identity
(represented by the
most significant 20
bits). The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
3GPP TS 36.413.

Indicates the local

identity of the intra-
frequency
neighboring cell. It
uniquely identifies a
cell within an
eNodeB. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity
LBFD-00201801 /
(represented by the YES YES NO
TDLBFD-00201801
least significant
eight bits) and the
eNodeB identity.
The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
3GPP TS 36.413.
Indicates the cell
individual offset for
the intra-frequency
neighboring cell,
which is used in
evaluation for
handovers. It
affects the
LBFD-00201801 /
probability of
NO NO NO TDLBFD-00201801
triggering intra-
TDLBFD-002018
frequency
measurement
reports. A larger
value of this
parameter indicates
a higher probability.
For details, see
3GPP TS 36.331.

Indicates the offset

for the intra-
frequency
neighboring cell,
which is used in
evaluation for cell
reselections. A
larger value of this
parameter results in
a lower probability
of cell reselections.
If this parameter is
LBFD-00201801 /
not set to dB0, it is NO NO NO
TDLBFD-00201801
delivered in SIB4.
For details, see
3GPP TS 36.331. If
this parameter is
set to dB0, it is not
delivered in SIB4.
In this situation,
UEs use 0 dB as
the offset for cell
reselections. For
details, see 3GPP
TS 36.304.
Indicates whether
handovers of UEs LBFD-00201801 /
NO NO NO
to the neighboring TDLBFD-00201801
cell are prohibited.

Indicates whether
to permit or prohibit
removal of the
NO NO NO LOFD-002001
neighboring
relationship by
ANR.

Indicates whether
this neighboring cell
is automatically NO NO NO LOFD-002001
discovered by the
ANR algorithm.

LBFD-00201801 /
Indicates the name TDLBFD-00201801
NO NO NO
of the local cell. LOFD-002001 /
TDLOFD-002001
Indicates the name
LBFD-00201801 /
of the intra-
TDLBFD-00201801
frequency NO NO NO
LOFD-002001 /
neighboring E-
TDLOFD-002001
UTRAN cell.
Indicates the
priority of
measurement on
the intra-frequency
neighboring cell.
LBFD-00201801 /
The eNodeB
TDLBFD-00201801
preferentially
LBFD-00201804 /
contains the NO NO NO
TDLBFD-00201804
information about a
LBFD-00201805 /
neighboring cell
TDLBFD-00201805
with this priority set
to HIGH_PRIORITY
while delivering a
measurement
configuration.
Indicates the
maximum cell
coverage offset.
This parameter is
specified to achieve
coverage
expansion of micro
base stations. The
offset that actually
takes effect
depends on UE
capabilities.The
parameter value is
added to or
subtracted from the
handover
parameter cell
individual offset
(CIO) to obtain a LOFD-001099 /
NO NO NO
new CIO, which LAOFD-081233
must meet protocol-
defined constraints.
The updated CIO is
delivered to UEs so
that handovers from
an eNodeB to a
micro base station
can be triggered
more easily or
handovers from a
micro base station
to an eNodeB can
be triggered less
easily. In this
manner, the cell
coverage of a micro
base station is
expanded.
Indicates the
neighboring cell
classification label.
The parameter
values FORMAL
and EXTENDED
represent different
neighboring cell
management
policies. If the
number of LOFD-
handovers to a NO NO NO 081225/TDLOFD-
neighboring cell 081225
reaches a
predefined
threshold, the
parameter is set to
FORMAL for this
neighboring cell;
otherwise, the
parameter is set to
EXTENDED for this
neighboring cell.
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
LBFD-00201804 /
The MO removal is NO NO NO
TDLBFD-00201804
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added

Indicates the
LBFD-00201801 /
physical ID of the
TDLBFD-00201801
neighboring E-
LBFD-00201802 /
UTRAN cell. For NO NO YES
TDLBFD-00201802
details about this
LBFD-00201803 /
parameter, see
TDLBFD-00201803
3GPP TS 36.331.
Indicates the
downlink (DL) E- LOFD-001036 /
UTRA absolute TDLOFD-001036
radio frequency LOFD-001037 /
channel number TDLOFD-001037
(EARFCN) of the NO NO YES TDLBFD-00201801
neighboring E- TDLBFD-00201802
UTRAN cell. For TDLBFD-00201804
details about this TDLBFD-00201805
parameter, see TDLOFD-001050
3GPP TS 36.104.

between macro
cells and micro
cells. In HetNet
networking, the
macro cell and
micro cell that
greatly interfere
each other are
added to one
cluster, and homing
relationships are
configured between
the macro cell and
micro cells in each
cluster. A cluster
consists of one
macro cell and a
maximum of eight
homing micro cells.
NO NO NO LAOFD-081233
If this parameter is
set to ON(On), a
neighboring cell is a
homing cell of the
local cell.
If this parameter is
set to OFF(Off), the
neighboring cell is
not a homing cell of
the local cell.
The homing
relationship
between a macro
cell and a micro cell
takes effect only
when the parameter
settings are the
same in the two
cells.
Indicates the cell ID
of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

LBFD-00201802 /
Indicates the DL TDLBFD-00201802
EARFCN of the LBFD-00201803 /
neighboring cell on TDLBFD-00201803
the neighboring E- YES YES NO LBFD-00201804 /
UTRAN frequency. TDLBFD-00201804
For details, see the LBFD-00201805 /
3GPP TS 36.104. TDLBFD-00201805
TDLOFD-001050

Indicates whether LBFD-00201802 /

to configure the TDLBFD-00201802
uplink E-UTRA LBFD-00201803 /
absolute radio TDLBFD-00201803
frequency channel NO NO NO LBFD-00201804 /
number (EARFCN) TDLBFD-00201804
for the inter- LBFD-00201805 /
frequency TDLBFD-00201805
neighboring cell. TDLOFD-001050
Indicates the uplink
E-UTRA absolute
radio frequency
channel number
(EARFCN) of the
LBFD-00201802 /
inter-frequency
TDLBFD-00201802
neighboring cell. If
LBFD-00201803 /
the value of this
TDLBFD-00201803
parameter is not
NO NO NO LBFD-00201804 /
specified, the
TDLBFD-00201804
default uplink
LBFD-00201805 /
EARFCN is used,
TDLBFD-00201805
which is calculated
TDLOFD-001050
based on the
downlink EARFCN.
For details about
this parameter, see
3GPP TS 36.104.

Indicates whether
to set the
reselection priority
of the neighboring
E-UTRAN
frequency. For
details about how LBFD-00201803 /
NO NO NO
UEs process TDLBFD-00201803
frequency priorities
during cell
reselection, see
section 5.2.4.1 of
3GPP TS 36.304
(V12.4.0).
whether to reselect
a neighboring cell
on the frequency
based on the value
of this parameter
and the absolute
priority of the
serving cell. If the
value of this
parameter is larger
than the absolute
priority of the
serving cell, the UE
starts
measurements on
neighboring cells on
the frequency; then
if the signal quality
of some LBFD-00201803 /
NO NO NO
neighboring cells TDLBFD-00201803
meets the related
conditions, the UE
starts cell
reselection. If the
value of this
parameter is less
than or equal to the
absolute priority of
the serving cell, the
UE starts the
measurements only
when the signal
quality of the
serving cell is poor;
then if the signal
quality of some
neighboring cells
meets the related
Indicates the
evaluation duration
for a UE to
determine whether
to reselect the inter-
frequency
neighboring cell to
camp on. If the
signal quality in an
inter-frequency
neighboring cell is
better than that in
the serving cell for
LBFD-00201803 /
the period specified NO NO NO
TDLBFD-00201803
by this parameter
and a UE camps on
the serving cell for
more than 1s, the
UE attempts to
reselect the inter-
frequency
neighboring cell to
camp on. This
parameter is
contained in SIB5.
For details, see
3GPP TS 36.331.

Indicates whether
to set the speed-
dependent scaling
parameters related
to cell reselection.
LBFD-00201803 /
If this parameter is NO NO NO
TDLBFD-00201803
set to NOT_CFG,
speed-dependent
cell reselections are
not supported by
default.
Indicates the
scaling factor
applied to the cell
reselection duration
for medium-mobility LBFD-00201803 /
NO NO NO
UEs. This TDLBFD-00201803
parameter is
delivered in SIB5.
For details, see
3GPP TS 36.331.

Indicates the
scaling factor
applied to the cell
reselection duration
for high-mobility LBFD-00201803 /
NO NO NO
UEs. This TDLBFD-00201803
parameter is
delivered in SIB5.
For details, see
3GPP TS 36.331.
Indicates the
measurement
bandwidth of the
inter-frequency
neighboring cell on
the frequency. The
setting of this
parameter depends
on the bandwidth
configuration of the LBFD-00201802 /
cell. In E-UTRAN, a TDLBFD-00201802
cell bandwidth is LBFD-00201804 /
NO YES NO
also expressed in TDLBFD-00201804
units of resource LBFD-00201805 /
blocks (RBs). Cell TDLBFD-00201805
bandwidths 1.4
MHz, 3 MHz, 5
MHz, 10 MHz, 15
MHz, and 20 MHz
correspond to 6
RBs, 15 RBs, 25
RBs, 50 RBs, 75
RBs, and 100 RBs,
respectively.

Indicates the
frequency-specific
offset for the
neighboring E-
UTRAN frequency
that applies to UEs
in idle mode. It is
LBFD-00201803 /
contained in system NO NO NO
TDLBFD-00201803
information block
type 5 (SIB5) and
delivered to UEs in
idle mode for cell
reselection. For
details, see 3GPP
TS 36.331.
Indicates the RX
level required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
priority of the
frequency is higher
than that of the
serving frequency.
After
measurements are
LBFD-00201803 /
started for NO NO NO
TDLBFD-00201803
neighboring cells on
the frequency, the
UE reselects to a
neighboring cell on
the frequency only
if the RX level of
the cell is better
than the value
specified by this
parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.331.

Indicates the
minimum RX level
required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
priority of the
frequency is lower
than that of the
serving frequency.
After
measurements are
started for
LBFD-00201803 /
neighboring cells on NO NO NO
TDLBFD-00201803
the frequency, the
UE reselects to a
neighboring cell on
the frequency only
if the RX level of
the serving cell is
lower than a
specified threshold
and that of the cell
is higher than the
value specified by
this parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.331.
Indicates the RX
level required for a
neighboring cell on
the frequency to
become a suitable
cell for selection. It
is included in
criteria S and used
in the evaluation for
cell selection.
During the
evaluation for cell
reselection, the UE
performs the
following
LBFD-00201803 /
calculation: Srxlev = NO NO NO
TDLBFD-00201803
Measured RSRP
value of a
neighboring cell on
the frequency -
Value of this
parameter -
Compensated
power. If Srxlev for
a cell is better than
a threshold for a
time-to-trigger,
reselection to the
cell is started. For
details, see 3GPP
TS 36.304.

Indicates whether
to set the maximum
power that the UE
can apply to
transmission on the
neighboring E-
LBFD-00201803 /
UTRAN frequency. NO NO NO
TDLBFD-00201803
If the value of this
parameter is not
specified, the
maximum power is
subject to the UE
capability.
Indicates the
maximum power
that the UE can
apply to
transmission on the
neighboring E-
UTRAN frequency.
It is used in cell
reselection criteria
LBFD-00201803 /
to calculate the NO NO NO
TDLBFD-00201803
compensated
power. If the value
of this parameter is
not specified, the
maximum power is
subject to the UE
capability. For
details, see 3GPP
TS 36.304.
neighboring cell
configuration of the
local cell.
The value
BitString00
indicates that some
inter-frequency
neighboring cells
have the same
MBSFN subframe
configuration as the
local cell.
The value
BitString01
indicates that none
of the inter- LBFD-00201802 /
frequency TDLBFD-00201802
neighboring cells is LBFD-00201803 /
configured with TDLBFD-00201803
NO NO NO
MBSFN subframes. LBFD-00201804 /
The value TDLBFD-00201804
BitString10 LBFD-00201805 /
indicates that the TDLBFD-00201805
MBSFN subframe
configurations of all
neighboring cells
are the same as or
subsets of that of
the local cell.
The value
BitString11
indicates that some
inter-frequency
neighboring cells
have different UL-
DL subframe
configurations from
the local TDD cell.
Indicates whether
all inter-frequency
neighboring cells on
this frequency are
configured with at
least two antenna
ports.
Set this parameter
to
LBFD-00201802 /
BOOLEAN_TRUE if
TDLBFD-00201802
all inter-frequency
LBFD-00201803 /
neighboring cells on
TDLBFD-00201803
this frequency are NO NO NO
LBFD-00201804 /
configured with at
TDLBFD-00201804
least two antenna
LBFD-00201805 /
ports.
TDLBFD-00201805
Set this parameter
to
BOOLEAN_FALSE
if one inter-
frequency
neighboring cell on
this frequency is
configured with only
one antenna port.

Indicates the event

to trigger coverage-
based inter-
frequency
handovers. This
parameter can be
set to EventA3,
EventA4, or
EventA5. If the
neighboring E-
UTRAN frequency
and the serving LOFD-001032 /
frequency are in the TDLOFD-001032
same frequency NO NO NO LOFD-070215 /
band, event A3 is TDLOFD-070215
recommended as it LOFD-070204
provides better
handover
performance in this
situation. If the
neighboring E-
UTRAN frequency
and the serving
frequency are in
different frequency
bands, event A4 or
A5 is used.
Indicates the
RSRQ-based
minimum RX level
required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
RSRQ-based
priority of the
frequency is higher
than that of the
serving frequency.
After
measurements are LBFD-00201803 /
NO NO NO
started for TDLBFD-00201803
neighboring cells on
the neighboring E-
UTRAN frequency,
the UE reselects to
a neighboring cell
on the frequency
only if the RSRQ-
based RX level of
the cell is higher
than the value
specified by this
parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.331.
Indicates the
RSRQ-based
minimum RX level
required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
RSRQ-based
priority of the
frequency is lower
than that of the
serving frequency.
After
measurements are
started for
neighboring cells on LBFD-00201803 /
NO NO NO
a frequency in the TDLBFD-00201803
GERAN carrier
frequency group,
the UE reselects to
a neighboring cell
on the frequency
only if the RSRQ-
based RX level of
the serving cell is
lower than a
specified threshold
and that of the cell
is higher than the
value specified by
this parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.331.

Indicates whether
LBFD-00201803 /
to set the minimum NO NO NO
TDLBFD-00201803
required RX level.
Indicates the
minimum RX level
of an inter-
frequency
neighboring cell,
which is required for
it to become a
candidate for cell
reselection. It
determines the
LBFD-00201803 /
probability of NO NO NO
TDLBFD-00201803
triggering cell
reselection to inter-
frequency
neighboring cells on
the frequency. The
value of this
parameter is
contained in SIB5.
For details, see
3GPP TS 36.331.

Indicates the
frequency priority
based on which the
eNodeB selects a
target frequency for
blind redirection or
contains a
frequency in a
measurement
configuration. If a
blind redirection is
triggered and the
target neighboring
cell is not specified,
the eNodeB selects
a target frequency
LBFD-00201802 /
based on this
TDLBFD-00201802
priority. If a NO NO NO
LBFD-00201804 /
measurement
TDLBFD-00201804
configuration is to
be delivered, the
eNodeB
preferentially
delivers a
frequency with the
highest priority. If
this priority is set to
0 for a frequency,
this frequency is not
selected as the
target frequency for
a blind redirection.
A larger value
indicates a higher
priority.
Indicates whether
the neighboring
frequency of the
serving frequency
can be a target
frequency in load
balancing. If this
parameter is set to
ALLOWED, the
neighboring
frequency of the
serving frequency
LOFD-001032 /
can be selected as NO NO NO
TDLOFD-001032
a target frequency
in load balancing. If
this parameter is
set to
NOT_ALLOWED,
the neighboring
frequency of the
serving frequency
cannot be selected
as a target
frequency in load
balancing.

Indicates whether
to enable or disable
measurement for
frequency-priority-
based inter-
frequency
handovers to
neighboring
frequencies. In
frequency-priority-
based handovers, if
the eNodeB
delivers frequencies
to be measured
NO NO NO None
based on frequency
configuration, the
frequencies with the
FreqPriBasedHoMe
asFlag parameter
set to ENABLE can
be measured, and
the frequencies with
the
FreqPriBasedHoMe
asFlag parameter
set to DISABLE
cannot be
measured.
CellMlb MO are
selected. The
eNodeB transfers
normally released
UEs to frequencies
based on the preset
proportions among
frequencies, so that
load balancing for
UEs in idle mode is
achieved. The sum
of proportions for
load balancing
among all
frequencies cannot
exceed 100%.
Proportion for load
balancing at the
serving frequency = LOFD-001032 /
NO NO NO
100% – (proportion TDLOFD-001032
at frequency 1 +
proportion at
frequency 2 + … +
proportion at
frequency n).
If the
INTER_FREQ_IDL
E_MLB_SWITCH
option of the
MlbAlgoSwitch
parameter in the
ENodeBAlgoSwitch
MO and the
ADAPTIVE_PROP
ORTION option of
the
InterFreqIdleMlbMo
de parameter in the
Indicates the
priority of the
neighboring E-
UTRAN frequency
for load balancing.
The value 0
indicates the lowest
LOFD-
priority. The
NO NO NO 001032/TDLOFD-
neighboring E-
001032
UTRAN frequency
with the highest
priority is selected
as the target
frequency for inter-
frequency load
balancing.
Indicates the
frequency-specific
offset for the
neighboring E-
UTRAN frequency
that applies to UEs
in connected mode.
LBFD-00201802 /
It is contained in the
TDLBFD-00201802
event A3/A4/A5
LBFD-00201804 /
measurement NO NO NO
TDLBFD-00201804
configuration and
LBFD-00201805 /
delivered to UEs in
TDLBFD-00201805
connected mode.
The offset affects
the probability of
reporting events A3,
A4, and A5. For
details, see 3GPP
TS 36.331.

Indicates the LBFD-00201802 /

frequency TDLBFD-00201802
measurement LBFD-00201804 /
NO NO NO
priority. A larger TDLBFD-00201804
value indicates a LBFD-00201805 /
higher priority. TDLBFD-00201805
Indicates the offset
to the RSRP
threshold for events
A4 and A5 that
trigger coverage-
based inter-
frequency
handovers. In
coverage-based
handovers, the
eNodeB delivers
the RSRP threshold
for event A4 or A5
to UEs, which is
equal to the sum of
the
InterFreqHoA4Thd LBFD-00201802 /
NO NO NO
Rsrp and TDLBFD-00201802
IfHoThdRsrpOffset
parameter values. If
the RSRP threshold
for event A4 or A5
is less than the
minimum RSRP
value, the minimum
value is delivered
instead. If the
RSRP threshold for
event A4 or A5 is
greater than the
maximum RSRP
value, the maximum
value is delivered
instead.
Indicates the offset
to the RSRP
threshold for events
A4 and A5 that
trigger load-based
inter-frequency
handovers. In load-
based inter-
frequency
handovers, the
eNodeB delivers
the RSRP threshold
for event A4 or A5
to UEs, which is
equal to the sum of
the
InterFreqLoadBase LOFD-001032 /
NO NO NO
dHoA4ThdRsrp and TDLOFD-001032
IfMlbThdRsrpOffset
parameter values. If
the RSRP threshold
for event A4 or A5
is less than the
minimum RSRP
value, the minimum
value is delivered
instead. If the
RSRP threshold for
event A4 or A5 is
greater than the
maximum RSRP
value, the maximum
value is delivered
instead.
Indicates whether
the EARFCN is
specific to the
primary frequency
band. Among the
EARFCNs of the
same frequency, if
the
MasterBandFlag
parameter is set to
TRUE for one
EARFCN and
FALSE for other
EARFCNs, the
former EARFCN is
specific to the
primary frequency
band while the
LBFD-070103 /
latter EARFCNs are NO NO NO
TDLBFD-00201806
specific to
secondary
frequency bands. In
this case, only the
EARFCN specific to
the primary
frequency band is
broadcast in system
information block
type 5 (SIB5). If the
MasterBandFlag
parameter is set to
FALSE for all
EARFCNs of the
same frequency,
only the smallest
EARFCN is
broadcast in SIB5.
Indicates whether
an intra-RAT inter-
frequency
neighboring cell is a
shared neighboring
cell. If this
parameter is set to
BOOLEAN_TRUE,
the neighboring E-
UTRAN frequency
is a shared
frequency, and the
shared operator
information must be
checked on the
OSS before all LOFD-
inter-frequency NO NO NO 002001/TDLOFD-
neighboring cells 002001
are added. If this
parameter is set to
BOOLEAN_FALSE,
the neighboring E-
UTRAN frequency
is not a shared
frequency, and the
shared operator
information does
not need to be
checked on the
OSS before all
inter-frequency
neighboring cells
are added.

Indicates whether
an inter-frequency
cell is set to
LOW_SPEED,
HIGH_SPEED,
ULTRA_HIGH_SPE
ED, or
EXTRA_HIGH_SPE LOFD-081228
NO NO NO
ED. This parameter TDLOFD-080205
indicates the
handover direction
when high- or low-
speed handover
algorithm is
enabled for high-
speed railway UEs.
Indicates whether
information about
inter-frequency
neighboring cells
and external cells
configured on the
frequency
associated with the
serving cell can be
maintained by ANR. LOFD-002001 /
NO NO NO
If this parameter is TDLOFD-002001
set to ALLOWED,
the information can
be maintained by
ANR. If this
parameter is set to
NOT_ALLOWED,
the information
cannot be
maintained by ANR.

Indicates the
frequency priority of
providing VoIP
services on the
intra-RAT
neighboring
frequency. A larger
value of this
parameter indicates
a higher priority.
During coverage-
based inter-
frequency
handovers with
VoipMeasFreqPriS
witch being on, the
eNodeB selects LBFD-00201802 /
NO NO NO
and delivers the TDLBFD-00201802
neighboring
frequencies based
on the frequency
priorities when
starting
measurements. The
eNodeB
preferentially
delivers the
frequency with the
highest priorities to
VoIP UEs. If this
parameter is set to
0, this neighboring
frequency is not
prioritized.
Indicates the
priority of a
neighboring E-
UTRAN frequency
for carrying PS
services. A large
value indicates a
high priority. If
PsMeasFreqPriSwit
ch is on, the
eNodeB
preferentially
selects the LBFD-00201802 /
NO NO NO
neighboring E- TDLBFD-00201802
UTRAN frequency
with the highest PS
service priority for
measurement
during a coverage-
based inter-
frequency handover
procedure. If
PsPriority is set to 0
for a frequency, this
frequency is not
prioritized.
This parameter
specifies whether
the neighboring E-
UTRA frequency
can be a target
frequency for
VoLTE UEs in
handovers. If this
parameter is set to
ALLOWED, the
neighboring E-
UTRA frequency
NO NO NO None
can be a target
frequency for
VoLTE UEs in
handovers. If this
parameter is set to
NOT_ALLOWED,
the neighboring E-
UTRA frequency
cannot be a target
frequency for
VoLTE UEs in
handovers.
relationship with the
cell to which the
number of UEs
handed over from
the local cell is the
smallest.
Consider that all
values of this
parameter for all E-
UTRAN frequencies
are the same non-
zero value. If the
frequency serving
the cell whose
neighbor
relationship is to be
added has
neighboring cells
LOFD-002001 /
whose neighbor NO NO NO
TDLOFD-002001
relationships can be
removed, the
eNodeB removes
the neighbor
relationship with the
cell that operates
on this frequency
and to which the
number of UEs
handed over from
the local cell is the
smallest. If the
frequency does not
have neighboring
cells whose
neighbor
relationships can be
removed, the

Indicates whether a
frequency can be
selected as the
target frequency for
inter-frequency
MLB for low-
efficiency UEs.
When this
parameter is set to
ALLOWED, this
frequency can be
selected as the NO NO NO TDLOFD-081212
target frequency. If
this parameter is
set to
NOT_ALLOWED,
this frequency
cannot be selected
as the target
frequency. This
parameter applies
only to LTE TDD
cells.
Indicates the event
type used to trigger
MLB-based inter-
frequency
handovers. MLB-
based inter-
frequency
handovers can be
triggered based on
event A4 or event LOFD-001032 /
A5. If an inter- TDLOFD-001032
frequency NO NO NO LOFD-070215 /
neighboring cell TDLOFD-070215
and the serving cell LOFD-070204
are served by the
same eNodeB, you
are advised to set
this parameter to
EventA4(EventA4);
otherwise, you are
advised to set this
parameter to
EventA5(EventA5).

Indicates whether a
frequency can be
selected as the
target frequency for
mobility
management.
SpeedMobilityTarge
tInd: If this
parameter is set to
1 and
InterFreqSpeedHoS NO NO NO None
witch is on, the
frequency can be
selected as the
target frequency for
a speed-based
inter-frequency
handover. If this
parameter is set to
0, the frequency
cannot.
Indicates the ratio
of cell spectral
efficiency in the
local cell to that in a
neighboring cell.
After the PRB
usage-based MLB
is triggered for the
local cell, the
eNodeB considers
the ratio of cell
spectral efficiency NO NO NO TDLOFD-001032
in the local cell to
that in a
neighboring cell
when determinining
load difference
between the local
and neighboring
cells. This
parameter applies
only to LTE TDD
cells.

Indicates whether
the neighboring E-
UTRAN frequency
can be used as a
target frequency for
uplink traffic-based
MLB. If this
parameter is set to
ALLOWED, this
frequency can be
selected as the
NO NO NO TDLOFD-081236
target frequency. If
this parameter is
set to
NOT_ALLOWED,
this frequency
cannot be selected
as the target
frequency. This
parameter applies
only to LTE TDD
networks.
Indicates the
priority of the
neighboring E-
UTRAN frequency
to be selected as a
target frequency for
uplink traffic-based
MLB. The eNodeB
selects a high-
priority frequency NO NO NO TDLOFD-081236
as the target
frequency for uplink
traffic-based MLB.
The value 0
indicates the lowest
priority. This
parameter applies
only to LTE TDD
networks.

Indicates the offset

of the signal quality
of the neighboring
cell against that of
the serving cell for
MLB-oriented inter-
frequency
handovers triggered
by event A3. If the
parameter is set to
a large value, an
inter-frequency
LOFD-001032 /
handover is NO NO NO
TDLOFD-001032
performed only
when the signal
quality of the
neighboring cell is
significantly better
than that of the
serving cell. For
details, see 3GPP
TS 36.331. This
parameter applies
only to LTE TDD
cells.
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is NO NO NO LOFD-002001
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added

Indicates the cell ID

of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the DL
EARFCN of the LBFD-00201803 /
inter-frequency TDLBFD-00201803
YES YES NO
blacklisted cell. For LBFD-00201802 /
details, see 3GPP TDLBFD-00201802
TS 36.104.

Indicates the
LBFD-00201802 /
starting physical cell
TDLBFD-00201802
ID of the inter-
LBFD-00201804 /
frequency YES YES NO
TDLBFD-00201804
blacklisted cell. For
LBFD-00201805 /
details, see 3GPP
TDLBFD-00201805
TS 36.331.

Indicates the name LBFD-00201803 /

of the inter- TDLBFD-00201803
NO NO NO
frequency LBFD-00201802 /
blacklisted cell. TDLBFD-00201802

Indicates the
LBFD-00201802 /
physical cell ID
TDLBFD-00201802
range of the inter-
LBFD-00201804 /
frequency NO NO NO
TDLBFD-00201804
blacklisted cell. For
LBFD-00201805 /
details, see 3GPP
TDLBFD-00201805
TS 36.331.
Indicates the cell ID
of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the mobile

country code of the
E-UTRAN
neighboring cell.
The PLMN consists
of the MCC and the
MNC.
LBFD-00201802 /
The MCC consists YES YES NO
TDLBFD-00201802
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.

Indicates the mobile

network code of the
E-UTRAN
neighboring cell.
The PLMN consists
of the MCC and the
MNC.
LBFD-00201802 /
The MCC consists YES YES NO
TDLBFD-00201802
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.
Indicates the
eNodeB identity of
the inter-frequency
neighboring cell. It
uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity and the
YES YES NO None
eNodeB identity
(represented by the
most significant 20
bits). The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
3GPP TS 36.413.

Indicates the local

identity of the inter-
frequency
neighboring cell. It
uniquely identifies a
cell within an
eNodeB. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity
(represented by the YES YES NO LBFD-00201802
least significant
eight bits) and the
eNodeB identity.
The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
3GPP TS 36.413.
Indicates the cell
individual offset for
the inter-frequency
neighboring cell,
which is used in
evaluation for
handovers. It LBFD-00201802 /
affects the TDLBFD-00201802
probability of LBFD-00201804 /
NO NO NO
triggering inter- TDLBFD-00201804
frequency LBFD-00201805 /
measurement TDLBFD-00201805
reports. A larger
value of this
parameter indicates
a higher probability.
For details, see
3GPP TS 36.331.

Indicates the offset

for the inter-
frequency
neighboring cell,
which is used in
evaluation for cell
reselections. A
larger value of this
parameter results in
a lower probability
of cell reselections.
If this parameter is
LBFD-00201803 /
not set to dB0, it is NO NO NO
TDLBFD-00201803
delivered in SIB5.
For details, see
3GPP TS 36.331. If
this parameter is
set to dB0, it is not
delivered in SIB5.
In this situation,
UEs use 0 dB as
the offset for cell
reselections. For
details, see 3GPP
TS 36.304.
 LBFD-00201802 /
TDLBFD-00201802
Indicates whether LBFD-00201804 /
handovers of UEs TDLBFD-00201804
NO NO NO
to the neighboring LBFD-00201805 /
cell are prohibited. TDLBFD-00201805
LOFD-002012 /
TDLOFD-002012

Indicates whether
to permit or prohibit LOFD-002001 /
removal of the TDLOFD-002001
NO NO NO
neighboring LOFD-002012 /
relationship by TDLOFD-002012
ANR.

The parameter
values are divided
into three
segments,
indicating the blind-
handover priority,
frequency-based-
handover priority,
and 0. Within the
same segment, a
larger parameter
value indicates a
higher priority. Blind
handover is a
process in which
the eNodeB
instructs a UE to
LBFD-00201802 /
hand over to a
TDLBFD-00201802
specified
NO NO NO LBFD-00201804 /
neighboring cell
TDLBFD-00201804
without
TDLOFD-001050
measurements. If
this parameter
value is set to 0,
blind handovers
and frequency-
based handovers
cannot be
performed. The
parameter values 1
to 16 indicate the
blind-handover
priorities. The
parameter values
17 to 32 indicate
the frequency-
based-handover
priorities for
Indicates whether
this neighboring cell
is automatically NO NO NO LOFD-002001
discovered by the
ANR algorithm.

LBFD-00201802 /
Indicates the name TDLBFD-00201802
NO NO NO
of the local cell. LOFD-002001 /
TDLOFD-002001

Indicates the name LBFD-00201802 /

of the inter- TDLBFD-00201802
NO NO NO
frequency LOFD-002001 /
neighboring cell. TDLOFD-002001
Indicates the
priority of
measurement on
the inter-frequency
neighboring cell. LBFD-00201802 /
The eNodeB TDLBFD-00201802
preferentially LBFD-00201804 /
contains the NO NO NO TDLBFD-00201804
information about a LBFD-00201805 /
neighboring cell TDLBFD-00201805
with this priority set TDLOFD-001050
to HIGH_PRIORITY
while delivering a
measurement
configuration.
Indicates whether
the inter-frequency
neighboring cell is
identified as a
neighboring cell
overlapping the
local E-UTRAN cell.
The default value is
NO. The parameter
value YES indicates
that the inter-
frequency LOFD-001032 /
neighboring cell is TDLOFD-001032
NO NO NO
identified as a LOFD-002001 /
neighboring cell TDLOFD-002001
overlapping the
local E-UTRAN cell.
The parameter
value NO indicates
that the inter-
frequency
neighboring cell is
not identified as a
neighboring cell
overlapping the
local E-UTRAN cell.
Indicates the
overlapping
coverage area of a
target neighboring
cell that is
configured for the
inter-frequency load
balancing NO NO NO TDLBFD-00201802
algorithm, which is
used to decide
location-based
priority user
policies. This
parameter is set
only for TDD cells.
Indicates the
neighboring cell
classification label.
The parameter
values FORMAL
and EXTENDED
represent different
neighboring cell
management
policies. If the
number of LOFD-
handovers to a NO NO NO 081225/TDLOFD-
neighboring cell 081225
reaches a
predefined
threshold, the
parameter is set to
FORMAL for this
neighboring cell;
otherwise, the
parameter is set to
EXTENDED for this
neighboring cell.
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is NO NO NO LOFD-002001
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
Indicates the
LBFD-00201801 /
physical ID of the
TDLBFD-00201801
neighboring E-
LBFD-00201802 /
UTRAN cell. For NO NO YES
TDLBFD-00201802
details about this
LBFD-00201803 /
parameter, see
TDLBFD-00201803
3GPP TS 36.331.

Indicates the
downlink (DL) E- LOFD-001036 /
UTRA absolute TDLOFD-001036
radio frequency LOFD-001037 /
channel number TDLOFD-001037
(EARFCN) of the NO NO YES TDLBFD-00201801
neighboring E- TDLBFD-00201802
UTRAN cell. For TDLBFD-00201804
details about this TDLBFD-00201805
parameter, see TDLOFD-001050
3GPP TS 36.104.

Indicates the mobile

country code of the
external E-UTRAN
cell.
LOFD-001036
The PLMN consists
LOFD-001037
of the MCC and the
TDLBFD-00201801
MNC.
TDLBFD-00201802
The MCC consists YES YES NO
TDLBFD-00201804
of three digits.
TDLBFD-00201805
The MNC consists
TDLOFD-001050
of two to three
LOFD-070206
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.
Indicates the mobile
network code of the
external E-UTRAN
LOFD-001036 /
cell.
TDLOFD-001036
The PLMN consists
LOFD-001037 /
of the MCC and the
TDLOFD-001037
MNC.
TDLBFD-00201801
The MCC consists YES YES NO
TDLBFD-00201802
of three digits.
TDLBFD-00201804
The MNC consists
TDLBFD-00201805
of two to three
TDLOFD-001050
digits.
LOFD-070206
For example, MCC
= 123, MNC = 45,
PLMN = 12345.

Indicates the
eNodeB identity of
the external E-
UTRAN cell. It
uniquely identifies
an eNodeB within a
PLMN. The 28-bit
E-UTRAN cell
identity is
comprised of the
cell identity and the
YES YES NO None
eNodeB identity
(represented by the
most significant 20
bits). The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
3GPP TS 36.413.
Indicates the cell
identity of the
external E-UTRAN
cell. It uniquely
identifies a cell
within an eNodeB.
The 28-bit E-
UTRAN cell identity
is comprised of the
cell identity LBFD-00201801 /
(represented by the TDLBFD-00201801
YES YES NO
least significant LBFD-00201802 /
eight bits) and the TDLBFD-00201802
eNodeB identity.
The cell global
identity (CGI) of an
E-UTRAN cell is
comprised of the E-
UTRAN cell identity
and the PLMN ID.
For details, see
3GPP TS 36.413.

LOFD-001036 /
TDLOFD-001036
LOFD-001037 /
Indicates the DL
TDLOFD-001037
EARFCN of the
TDLBFD-00201801
external E-UTRAN NO YES NO
TDLBFD-00201802
cell. For details, see
TDLBFD-00201804
3GPP TS 36.104.
TDLBFD-00201805
TDLOFD-001050
LOFD-070206

Indicates whether
to configure the
uplink E-UTRA LBFD-00201801 /
absolute radio TDLBFD-00201801
NO NO NO
frequency channel LBFD-00201802 /
number (EARFCN) TDLBFD-00201802
for the external E-
UTRAN cell.
Indicates the uplink
E-UTRA absolute
radio frequency
channel number
LOFD-001036 /
(EARFCN) of the
TDLOFD-001036
external E-UTRAN
LOFD-001037 /
cell. If the value of
TDLOFD-001037
this parameter is
TDLBFD-00201801
not specified, the NO NO NO
TDLBFD-00201802
default uplink
TDLBFD-00201804
EARFCN is used,
TDLBFD-00201805
which is calculated
TDLOFD-001050
based on the
LOFD-070206
downlink EARFCN.
For details about
this parameter, see
3GPP TS 36.104.

Indicates the
physical cell ID of
LBFD-00201801
the external E-
NO YES NO LBFD-00201802
UTRAN cell. For
LBFD-00201803
details, see 3GPP
TS 36.331.

Indicates the
tracking area code
(TAC) of the
external E-UTRAN
cell. Two TAC
values 0x0000(0)
and
LBFD-00201801 /
0xFFFE(65534) are
TDLBFD-00201801
reserved according NO YES NO
LBFD-00201802 /
to the protocol and
TDLBFD-00201802
will not be used in
future versions.
Therefore, do not
use 0 or 65534 as a
TAC value in TAC
planning or
configuration.
 LBFD-00201801 /
Indicates the name
TDLBFD-00201801
of the external E- NO NO NO
LBFD-00201802 /
UTRAN cell.
TDLBFD-00201802
UTRAN cell. If the
operating frequency
of an external E-
UTRAN cell
belongs to multiple
frequency bands,
the downlink
frequency of the
frequency band
with the highest
priority is configured
by the DlEarfcn
parameter, and
frequency bands
with other priorities
are configured by
the
EutranExternalCell
SlaveBand LBFD-070103 /
NO YES NO
parameter and TDLBFD-00201806
added in
descending order
based on frequency
band priorities. The
frequency band
priorities of an
external E-UTRAN
cell are determined
in network planning.
It is recommended
that the frequency
bands supporting
UEs that comply
with 3GPP TS
36.331 V8.16.0,
3GPP TS 36.331
V9.1.0, 3GPP TS
36.331 V10.5.0, or

Indicates the
frequency band in
which the cell
operates. For YES YES NO None
details about this
parameter, see
3GPP TS 36.104.
can be selected for
handovers during
roaming. This
parameter is set to
NO(No) by default.
If this parameter is
set to YES(Yes),
this neighboring cell
can be selected for
handovers during
roaming. If this
parameter is set to
NO(No), this
neighboring cell
cannot be selected
for handovers
during roaming.
If the PLMN of the
LOFD-00105401 /
neighboring cell is NO NO NO
TDLOFD-00105401
included in the
SPID-based
handover-allowable
HPLMN list or this
parameter is set to
YES(Yes), this
neighboring cell can
be selected for
handovers.
In the boundaries of
roaming areas and
non-roaming areas,
you are advised to
set this parameter
to YES(Yes) to
ensure that
neighboring cells in
roaming areas can
Indicates whether
an external cell is a
specified-service
cell. This parameter
is configured based
on the operator's
policies. The value
SPECSERCELL
indicates that an
external cell is a
specified-service
cell and UEs with
unidentified SPIDs
or UEs with
identified SPIDs
and the
SpecifiedUserFlag NO NO NO TDLOFD-090223
parameter set to
NONE cannot be
handed over to this
cell. The value
NONE indicates
that an external cell
is a common cell.
The value of this
parameter must be
the same as that of
the
SpecifiedCellFlag
parameter in the
Cell MO that
corresponds to the
external cell.
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
LOFD-002001 /
The MO removal is NO NO NO
TDLOFD-002001
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added

Indicates the cell ID

of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the
neighboring LOFD-001035 /
CDMA2000 band TDLOFD-001035
class. For details, LOFD-001021 /
YES YES NO
see the TDLOFD-001021
BandclassCDMA20 LOFD-001112 /
00 IE defined in TDLOFD-001112
3GPP 36.331.

LOFD-001035 /
TDLOFD-001035
Indicates the ID of LOFD-001021 /
YES YES NO
the operator. TDLOFD-001021
LOFD-001112 /
TDLOFD-001112

Indicates whether
to configure a
dedicated cell- LOFD-001035 /
reselection priority TDLOFD-001035
NO NO NO
based on the PLMN TDLOFD-001018
ID of the local cell TDLOFD-001112
for the CDMA2000
1xRTT band class.
reselection priority
for a CDMA2000
1xRTT band class
based on the PLMN
ID of the local cell.
The value 0
indicates the lowest
priority. If the
related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set, LOFD-001035 /
the eNodeB TDLOFD-001035
NO NO NO
delivers the cell TDLOFD-001018
reselection priorities TDLOFD-001112
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
CDMA2000 band
class, which is
Indicates whether
to configure
dedicated a cell-
LOFD-001021 /
reselection priority
NO NO NO TDLOFD-001021
based on the PLMN
TDLOFD-001112
ID of the local cell
for the CDMA2000
HRPD band class.
reselection priority
for a CDMA2000
HRPD band class
based on the PLMN
ID of the local cell.
The value 0
indicates the lowest
priority. If the
related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set,
LOFD-001021 /
the eNodeB
NO NO NO TDLOFD-001021
delivers the cell
TDLOFD-001112
reselection priorities
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
CDMA2000 band
class, which is

Indicates the ID of
the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the DL
EARFCN of the
operator that LOFD-001036 /
shares the TDLOFD-001036
YES YES NO
neighboring E- TDLOFD-001112
UTRAN frequency. LOFD-070206
For details, see the
3GPP TS 36.104.

Indicates the mobile

country code (MCC)
of the operator that
shares the
neighboring E-
UTRAN frequency.
A public land mobile
network (PLMN) ID
is comprised of an
LOFD-001036 /
MCC and a mobile
TDLOFD-001036
network code YES YES NO
TDLOFD-001112
(MNC).
LOFD-070206
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of the
operator that
shares the
neighboring E-
UTRAN frequency.
A public land mobile
network (PLMN) ID
is comprised of a LOFD-001036 /
mobile network TDLOFD-001036
YES YES NO
code (MCC) and an TDLOFD-001112
MNC. LOFD-070206
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, the
PLMN ID is 12345.
 LOFD-001036
Indicates whether
TDLBFD-00201803
to configure the cell NO NO NO
TDLOFD-001112
reselection priority.
LOFD-070206

shares the
neighboring E-
UTRAN frequency.
The value 0
indicates the lowest
priority. If the
related SPID
configuration is
specified, the cell
reselection priority
specified in the
SPID configuration
is used. If no
related SPID
configuration is
specified but this
parameter is set,
LOFD-001036
the eNodeB
TDLBFD-00201803
delivers the cell NO NO NO
TDLOFD-001112
reselection priorities
LOFD-070206
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring E-
UTRAN frequency,

Indicates the ID of
the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the DL
EARFCN of the
Operator
Configuration for
LOFD-001112 /
Serving Cell in YES YES NO
TDLOFD-001112
EUTRAN
Frequency. For
details, see the
3GPP TS 36.104.

Indicates the ID of LOFD-001112 /

YES YES NO
the operator. TDLOFD-001112

Indicates whether
to configure a
dedicated cell-
LOFD-001112 /
reselection priority
TDLOFD-001112
based on the PLMN NO NO NO
LBFD-00201803 /
ID of the local cell
TDLBFD-00201803
for the neighboring
E-UTRAN
frequency.
for an E-UTRAN
frequency based on
the PLMN ID of the
local cell. The value
0 indicates the
lowest priority. If the
related SPID
configuration is
specified, the cell
reselection priority
specified in the
SPID configuration
is used. If no
related SPID
configuration is
specified but this
parameter is set,
LOFD-001112 /
the eNodeB
TDLOFD-001112
delivers the cell NO NO NO
LBFD-00201803 /
reselection priorities
TDLBFD-00201803
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring E-
UTRAN frequency,

Indicates the ID of
the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the index
of the GERAN
carrier frequency
LOFD-001112 /
group. It uniquely YES YES NO
TDLOFD-001112
identifies a GERAN
carrier frequency
group.

Indicates the ID of LOFD-001112 /

YES YES NO
the operator. TDLOFD-001112

Indicates whether
to configure a
dedicated cell-
LOFD-001112 /
reselection priority
TDLOFD-001112
based on the PLMN NO NO NO
LBFD-00201803 /
ID of the local cell
TDLBFD-00201803
for the GERAN
carrier frequency
group.
for a GERAN
frequency based on
the PLMN ID of the
local cell. The value
0 indicates the
lowest priority. If the
related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set,
the eNodeB
LOFD-001112 /
delivers the cell
TDLOFD-001112
reselection priorities NO NO NO
LBFD-00201803 /
of all PLMNs
TDLBFD-00201803
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring
GERAN carrier
frequency group,

Indicates the cell

identity of the local
cell. It uniquely YES YES NO None
identifies a cell
within an eNodeB.

Indicates the index

of the GERAN
LOFD-001036 /
carrier frequency
TDLOFD-001036
group. It uniquely YES YES NO
TDLOFD-001112
identifies a GERAN
LOFD-070206
carrier frequency
group.
Indicates the mobile
country code (MCC)
of the operator that
shares the
neighboring
GERAN carrier
frequency group.
A public land mobile
network (PLMN) ID
is comprised of an LOFD-001036 /
MCC and a mobile TDLOFD-001036
YES YES NO
network code TDLOFD-001112
(MNC). LOFD-070206
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of the
operator that
shares the
neighboring
GERAN carrier
frequency group.
A public land mobile
network (PLMN) ID
LOFD-001036 /
is comprised of a
TDLOFD-001036
mobile country YES YES NO
TDLOFD-001112
code (MCC) and an
LOFD-070206
MNC.
The MCC consists
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates whether
to configure the cell LOFD-001036 /
reselection priority TDLOFD-001036
of the operator that LBFD-00201803 /
NO NO NO
shares the TDLBFD-00201803
neighboring TDLOFD-001112
GERAN carrier LOFD-070206
frequency group.
shares the
neighboring
GERAN carrier
frequency group.
The value 0
indicates the lowest
priority. If the
related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set, LOFD-001036 /
the eNodeB TDLOFD-001036
delivers the cell LBFD-00201803 /
NO NO NO
reselection priorities TDLBFD-00201803
of all PLMNs TDLOFD-001112
supported by a UE LOFD-070206
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring
GERAN carrier
frequency group,

Indicates the cell ID

of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Indicates the mobile
country code of the
neighboring UTRAN
cell.
The PLMN consists
of the MCC and the
MNC.
LOFD-001019 /
The MCC consists YES YES NO
TDLOFD-001019
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.

Indicates the mobile

network code of the
neighboring UTRAN
cell.
The PLMN consists
of the MCC and the
MNC.
LOFD-001019 /
The MCC consists YES YES NO
TDLOFD-001019
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.
mode. The 28-bit
UTRAN cell ID is
comprised of the
RNC ID and the
RNC cell ID. If the
RNC ID is
represented in the
RNC-ID mode, the
28-bit UTRAN cell
ID is comprised of
the RNC ID and the
RNC cell ID that are
represented by the
most significant 12
bits and the least
significant 16 bits,
respectively. In this
case, the formula LOFD-001019 /
for calculating the TDLOFD-001019
YES YES NO
UTRAN cell ID is as LOFD-001052 /
follows: UTRAN cell TDLOFD-001052
ID = RNC ID x
65536 + RNC cell
ID. If the RNC ID is
represented in the
extended RNC-ID
mode, the 28-bit
UTRAN cell ID is
comprised of the
RNC ID and the
RNC cell ID that are
represented by the
most significant 16
bits and the least
significant 12 bits,
respectively. In this
case, the formula
for calculating the
represented in the
RNC-ID or
extended RNC-ID
mode. If the RNC
ID is represented in
the RNC-ID mode,
the 28-bit UTRAN
cell ID is comprised
of the RNC ID and
the RNC cell ID that
are represented by
the most significant
12 bits and the
least significant 16
bits, respectively. In
this case, the
formula for
LOFD-001052 /
calculating the
TDLOFD-001052
UTRAN cell ID is as YES YES NO
LOFD-001019 /
follows: UTRAN cell
TDLOFD-001019
ID = RNC ID x
65536 + RNC cell
ID. If the RNC ID is
represented in the
extended RNC-ID
mode, the 28-bit
UTRAN cell ID is
comprised of the
RNC ID and the
RNC cell ID that are
represented by the
most significant 16
bits and the least
significant 12 bits,
respectively. In this
case, the formula
for calculating the
Indicates whether
to allow handover
of UEs to the
LOFD-001019 /
neighboring cell NO NO NO
TDLOFD-001019
that is determined
by the neighboring
relation.
Indicates whether
to permit or prohibit
removal of the LOFD-002002 /
NO NO NO
neighboring TDLOFD-002002
relationship by
ANR.
Indicates whether
this neighboring cell
LOFD-002002 /
is automatically NO NO NO
TDLOFD-002002
discovered by the
ANR algorithm.
Indicates the
priority of the
neighboring cell
during blind
handovers. Blind
handover is a
process in which
the eNodeB
LOFD-001019
instructs a UE to
TDLOFD-001022
hand over to a
TDLOFD-001033
specified
TDLOFD-001052
neighboring cell. NO NO NO
TDLOFD-001019
There are 32
TDLOFD-001043
priorities altogether.
TDLOFD-001072
The priority has a
TDLOFD-001078
positive correlation
with the value of
this parameter.
Note that the value
0 indicates that
blind handovers to
the neighboring cell
are not allowed.

Indicates the
priority of
measurement on
the neighboring
LOFD-001019
UTRAN cell. The
TDLOFD-001022
eNodeB
TDLOFD-001033
preferentially
TDLOFD-001052
contains the NO NO NO
TDLOFD-001019
information about a
TDLOFD-001043
neighboring cell
TDLOFD-001072
with this priority set
TDLOFD-001078
to HIGH_PRIORITY
while delivering a
measurement
configuration.
Indicates whether
the neighboring
UTRAN cell is
manually identified
as a neighboring
cell overlapping the
E-UTRAN cell. The
default value is NO.
The parameter
value YES indicates
that the neighboring
LOFD-001044 /
UTRAN cell is
NO NO NO TDLOFD-001044
manually identified
MRFD-231901
as a neighboring
cell overlapping the
E-UTRAN cell. The
parameter value
NO indicates that
the neighboring
UTRAN cell is not
manually identified
as a neighboring
cell overlapping the
E-UTRAN cell.
Indicates the
measurement
priority of the
neighboring UTRAN
cell. A larger value
indicates a higher LOFD-
priority. The 002002/TDLOFD-
measurement 002002
priorities can be LOFD-
periodically and 001022/TDLOFD-
automatically 001022
arranged based on LOFD-
the number of times 001033/TDLOFD-
that each 001033
neighboring UTRAN LOFD-
cell is measured. NO NO NO 001052/TDLOFD-
The neighboring 001052
UTRAN cells for LOFD-
UTRAN 001019/TDLOFD-
measurement 001019
control, UTRAN LOFD-
flash blind 001043/TDLOFD-
redirections, and 001043
UTRAN flash- LOFD-
CSFB-based 001072/TDLOFD-
redirections can be 001072
selected based on
the measurement
priorities of
neighboring UTRAN
cells.
Indicates the name
NO NO NO LOFD-001019
of the local cell.

Indicates the name

LOFD-001019 /
of the UTRAN NO NO NO
TDLOFD-001019
neighboring cell.
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
The MO removal is NO NO NO LOFD-002002
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added
Indicates the ID of
the eNodeB, which
uniquely identifies NO NO YES None
an eNodeB within a
PLMN.
Indicates the time
of the latest RIM
request received by NO NO YES None
the neighboring
UTRAN cell.

Indicates the latest

updated time of the
system information
that the eNodeB
NO NO YES None
receives from the
neighboring UTRAN
cell through the
RIM procedure.
Indicates the latest
time that the
eNodeB obtains the
load information
NO NO YES None
about the
neighboring UTRAN
cell through an RIM
procedure.

Indicates the latest

time that the
eNodeB initiates an
RIM procedure to
NO NO YES None
obtain the load
information about
the neighboring
UTRAN cell.

Indicates the load

status of the
neighboring UTRAN
cell, which is
NO NO YES None
obtained by the
eNodeB through
the latest RIM
procedure.

Indicates the cell ID

of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.

Indicates the
downlink UARFCN LOFD-001112 /
YES YES NO
of the neighboring TDLOFD-001112
UTRAN frequency.
Indicates the ID of LOFD-001112 /
YES YES NO
the operator. TDLOFD-001112

Indicates whether
to configure a
dedicated cell- LOFD-001112 /
reselection priority TDLOFD-001112
NO NO NO
based on the PLMN LBFD-00201803 /
ID of the local cell TDLBFD-00201803
for the UTRAN
frequency.

reselection priority
for a UTRAN
frequency based on
the PLMN ID of the
local cell. The value
0 indicates the
lowest priority. If the
related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set,
LOFD-001112 /
the eNodeB
TDLOFD-001112
delivers the cell NO NO NO
LBFD-00201803 /
reselection priorities
TDLBFD-00201803
of all PLMNs
supported by a UE
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring UTRAN
frequency, which is
Indicates the cell
identity of the local
cell. It uniquely YES YES NO None
identifies a cell
within an eNodeB.

Normal UARFCNs:
[4357-4458]
Special UARFCNs:
(1007, 1012, 1032,
1037, 1062, 1087)
Band 6:
Normal UARFCNs:
[4387-4413]
Special UARFCNs:
(1037, 1062)
Band 7:
Normal UARFCNs:
[2237-2563]
Special UARFCNs:
(2587, 2612, 2637,
2662, 2687, 2712,
2737, 2762, 2787,
LOFD-001036 /
2812, 2837, 2862,
TDLOFD-001036
2887, 2912) YES YES NO
TDLOFD-001112
Band 8:
LOFD-070206
Normal UARFCNs:
[2937-3088]
Special UARFCNs:
none
Band 9:
Normal UARFCNs:
[9237-9387]
Special UARFCNs:
none
The UARFCN
range in each TDD
frequency band is
shown as follows:
Band 1:
Normal UARFCNs:
[9500-9600] and
[10050-10125]
Indicates the mobile
country code (MCC)
of the neighboring
UTRAN cell.
A public land mobile
network (PLMN) ID
is comprised of an
MCC and a mobile
LOFD-001036 /
network code
TDLOFD-001036
(MNC). YES YES NO
TDLOFD-001112
The MCC consists
LOFD-070206
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates the mobile

network code
(MNC) of the
neighboring UTRAN
cell.
A public land mobile
network (PLMN) ID
is comprised of a
mobile country LOFD-001036 /
code (MCC) and an TDLOFD-001036
YES YES NO
MNC. TDLOFD-001112
The MCC consists LOFD-070206
of three digits.
The MNC consists
of two to three
digits.
For example, if the
MCC is 123 and the
MNC is 45, then the
PLMN ID is 12345.

Indicates whether
LOFD-001036 /
to configure the cell
TDLOFD-001036
reselection priority
LBFD-00201803 /
of the operator that NO NO NO
TDLBFD-00201803
shares the
TDLOFD-001112
neighboring UTRAN
LOFD-070206
frequency.
reselection priority
of the operator that
shares the
neighboring UTRAN
frequency. The
value 0 indicates
the lowest priority. If
the related SPID
configuration is
specified, set this
priority to the one
specified in the
SPID configuration.
If no related SPID
configuration is
specified but this
parameter is set, LOFD-001036 /
the eNodeB TDLOFD-001036
delivers the cell LBFD-00201803 /
NO NO NO
reselection priorities TDLBFD-00201803
of all PLMNs TDLOFD-001112
supported by a UE LOFD-070206
by using the IE
idleModeMobilityCo
ntrolInfo in an RRC
Connection
Release message
to the UE. If no
related SPID
configuration is
specified and this
parameter is not
set, a UE uses the
cell reselection
priority of the
neighboring UTRAN
frequency, which is
broadcast in the
Indicates the cell ID
of the local cell. It
uniquely identifies a YES YES NO None
cell within an
eNodeB.
Normal UARFCNs:
[4357-4458]
Special UARFCNs:
(1007, 1012, 1032,
1037, 1062, 1087)
Band 6:
Normal UARFCNs:
[4387-4413]
Special UARFCNs:
(1037, 1062)
Band 7:
Normal UARFCNs:
[2237-2563]
Special UARFCNs:
(2587, 2612, 2637,
2662, 2687, 2712,
LBFD-00201803 /
2737, 2762, 2787,
TDLBFD-00201803
2812, 2837, 2862,
LOFD-001019 /
2887, 2912)
YES YES NO TDLOFD-001019
Band 8:
LBFD-002009 /
Normal UARFCNs:
TDLBFD-002009
[2937-3088]
TDLOFD-001078
Special UARFCNs:
none
Band 9:
Normal UARFCNs:
[9237-9387]
Special UARFCNs:
none
The UARFCN
range in each TDD
frequency band is
shown as follows:
Band 1:
Normal UARFCNs:
[9500-9600] and
[10050-10125]
Special UARFCNs:
Indicates the
working mode LBFD-00201803 /
supported by the NO NO NO TDLBFD-00201803
UTRAN in the TDLOFD-001078
current UARFCN.
Indicates the
LOFD-001019 /
TDD/FDD mode of
NO NO NO TDLOFD-001019
the inter-RAT
LOFD-002002
UTRAN.
follows if the DL
frequency is a
normal one:
Band 1: UL
UARFCN = DL
UARFCN - 950;
Band 2: UL
UARFCN = DL
UARFCN - 400;
Band 3: UL
UARFCN = DL
UARFCN - 475;
Band 4: UL
UARFCN = DL
UARFCN - 2000;
Band 5: UL
UARFCN = DL LBFD-00201803 /
UARFCN - 225; TDLBFD-00201803
Band 6: UL NO NO NO LOFD-001019 /
UARFCN = DL TDLOFD-001019
UARFCN - 225; TDLOFD-001078
Band 7: UL
UARFCN = DL
UARFCN - 600;
Band 8: UL
UARFCN = DL
UARFCN - 225;
Band 9: UL
UARFCN = DL
UARFCN - 475;
The default UL
UARFCN is
calculated as
follows if the DL
frequency is a
special one:
Band 2: UL
Normal UARFCNs:
[4132-4233]
Special UARFCNs:
(782, 787, 807,
812, 837, 862)
Band 6:
Normal UARFCNs:
[4162-4188]
Special UARFCNs:
(812, 837)
Band 7:
Normal UARFCNs:
[2012-2338]
Special UARFCNs:
(2362, 2387, 2412,
2437, 2462, 2487,
2512, 2537, 2562,
2587, 2612, 2637, LBFD-00201803 /
2662, 2687) TDLBFD-00201803
NO NO NO
Band 8: LOFD-001019 /
Normal UARFCNs: TDLOFD-001019
[2712-2863]
Special UARFCNs:
none
Band 9:
Normal UARFCNs:
[8762-8912]
Special UARFCNs:
none
The UARFCN
range in each TDD
frequency band is
shown as follows:
Band 1:
Normal UARFCNs:
[9500-9600] and
[10050-10125]
Special UARFCNs:
Indicates whether
to set the priority of
a cell assigned with
the UARFCN used
in cell reselection to
UTRAN. For details
LBFD-00201803 /
about how UEs NO NO NO
TDLBFD-00201803
process frequency
priorities during cell
reselection, see
section 5.2.4.1 of
3GPP TS 36.304
(V12.4.0).
the UTRAN
frequency based on
the value of this
parameter and the
absolute priority of
the serving cell.
If the value of this
parameter is larger
than the absolute
priority of the
serving cell, the UE
starts
measurements on
neighboring cells on
the UTRAN
frequency; then if
the signal quality of LBFD-00201803 /
some neighboring TDLBFD-00201803
cells meets the NO NO NO LBFD-002009 /
related conditions, TDLBFD-002009
the UE starts cell TDLOFD-001018
reselection.
If the value of this
parameter is
smaller than the
absolute priority of
the serving cell, the
UE starts the
measurements only
when the signal
quality of the
serving cell is poor;
then if the signal
quality of some
neighboring cells
meets the related
conditions, the UE
Indicates the
maximum power
that the UE can
apply to
transmission on the
UTRAN frequency. LBFD-00201803 /
NO NO NO
It is used in criteria TDLBFD-00201803
S to calculate the
compensated
power. For details,
see 3GPP TS
25.104.
Indicates the
frequency offset of
the cell on the
UTRAN frequency.
LOFD-001019 /
It determines the
TDLOFD-001019
probability of
NO NO NO TDLOFD-001022
triggering
TDLOFD-001033
measurement
TDLOFD-001052
reports for events
B1 and B2. For
details, see 3GPP
TS 36.331.

Indicates the
minimum quality
level required for a
cell on the UTRAN
frequency to
become a
candidate for
reselection. This
parameter is
applied only to
reselection to
LBFD-00201803 /
UTRAN FDD cells. NO NO NO
TDLBFD-00201803
A neighboring cell
on the UTRAN
frequency can
become a
candidate for
reselection only
when the signal
quality of the cell is
better than the
value of this
parameter.
Indicates the RX
level required for a
neighboring cell on
the UTRAN
frequency to
become a
candidate for
selection. It is
included in criteria
S and used in the
evaluation for cell
selection. During
the evaluation for
cell reselection, the
UE performs the
following
LBFD-00201803 /
calculation: Srxlev = NO NO NO
TDLBFD-00201803
Measured RSRP
value of a
neighboring cell on
the frequency -
Value of this
parameter -
Compensated
power. If Srxlev for
a neighboring cell is
better than a
threshold for a time-
to-trigger,
reselection to the
cell is started. For
details, see 3GPP
TS 25.304.
Indicates the
minimum RX level
required for a
neighboring cell on
the UTRAN
frequency to
become a
candidate for
reselection if the
priority of the
frequency is higher
than that of the
serving frequency.
After
measurements are LBFD-00201803 /
NO NO NO
started for TDLBFD-00201803
neighboring cells on
the UTRAN
frequency, the UE
reselects to a
neighboring cell on
the frequency only
if the RX level of
the cell is higher
than the value
specified by this
parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.331.
Indicates the
minimum RX level
required for a
neighboring cell on
the UTRAN
frequency to
become a
candidate for
reselection if the
priority of the
frequency is lower
than that of the
serving frequency.
After
measurements are
started for
LBFD-00201803 /
neighboring cells on NO NO NO
TDLBFD-00201803
the UTRAN
frequency, the UE
reselects to a
neighboring cell on
the frequency only
if the RX level of
the serving cell is
lower than a
specified threshold
and that of the cell
is higher than the
value specified by
this parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.331.
Indicates the
RSRQ-based
minimum RX level
required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
RSRQ-based
priority of the
frequency is higher
than that of the
serving frequency.
After
LBFD-00201803 /
measurements are NO NO NO
TDLBFD-00201803
started for
neighboring cells on
the UTRAN
frequency, the UE
reselects to a
neighboring cell on
the frequency only
if the RSRQ-based
RX level of the cell
is higher than the
value specified by
this parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.331.
Indicates the
RSRQ-based
minimum RX level
required for a
neighboring cell on
the frequency to
become a
candidate for
reselection if the
RSRQ-based
priority of the
frequency is lower
than that of the
serving frequency.
After
measurements are
started for LBFD-00201803 /
NO NO NO
neighboring cells on TDLBFD-00201803
the frequency, the
UE reselects to a
cell on the
frequency only if
the RSRQ-based
RX level of the
serving cell is lower
than a specified
threshold and that
of the cell is higher
than the value
specified by this
parameter for a
time-to-trigger. For
details, see 3GPP
TS 36.331.
neighboring UTRAN
frequency to carry
PS services. In
coverage-based
inter-RAT PS
handovers, if
UtranFreqLayerMea
sSwitch is turned
on, the eNodeB
determines the
UTRAN frequency
to be delivered to a
UE based on PS
service priorities.
The eNodeB
delivers the UTRAN
frequency with the
highest PS priority
LOFD-001019 /
to the UE by
NO NO NO TDLOFD-001019
default.In blind
TDLOFD-001078
handovers to
UTRAN, the target
cell for a blind
handover is
selected based on
PS service
priorities. The cell
on the UTRAN
frequency with the
highest PS priority
is selected by
default.When this
parameter is set to
Priority_0 for a
UTRAN frequency,
the UTRAN
frequency is not
included in PS
frequency to carry
CS services. During
CSFB-based CS
service handovers
with
UtranFreqLayerMea
sSwitch being on,
the eNodeB selects
and delivers the
neighboring UTRAN
frequencies based
on the CS priorities
when starting
measurements. The
eNodeB
preferentially
delivers the UTRAN LOFD-001078 /
frequency with the TDLOFD-001078
highest CS priority NO NO NO TDLOFD-001033
to measure. During TDLOFD-001052
CSFB-based CS TDLOFD-001088
service handovers
with
UtranFreqLayerBlin
dSwitch being on,
the eNodeB selects
the target cells for
blind handovers on
neighboring UTRAN
frequencies based
on the CS priorities
and preferentially
selects the target
cell for blind
handovers on the
neighboring UTRAN
frequency with the
Indicates the
frequency priority
based on which the
eNodeB selects a
target frequency for
blind redirection or
contains a
frequency in a
measurement
configuration. If a
blind redirection is
triggered and the
target neighboring
cell is not specified, LOFD-001019 /
the eNodeB selects TDLOFD-001019
a target frequency TDLBFD-00201803
based on this TDLOFD-001022
priority. If a NO NO NO TDLOFD-001033
measurement TDLOFD-001052
configuration is to TDLOFD-001043
be delivered, the TDLOFD-001072
eNodeB TDLOFD-001078
preferentially
delivers a
frequency with the
highest priority. If
this priority is set to
0 for a frequency,
this frequency is not
selected as the
target frequency for
a blind redirection.
A larger value
indicates a higher
priority.
UTRAN, if
UtranCsfbSteeringS
witch and
UtranFreqLayerMea
sSwitch are turned
on, the eNodeB
determines the
UTRAN frequency
to be delivered to a
UE in
RRC_CONNECTE
D mode based on
the priority specified
by this parameter.
The eNodeB
preferentially
LOFD-001088 /
delivers the UTRAN
TDLOFD-001088
frequency with the
LOFD-001019 /
highest CS+PS
NO NO NO TDLOFD-001019
combined service
TDLOFD-001033
priority to the UE. In
TDLOFD-001052
blind CSFB to
TDLOFD-001078
UTRAN, if
UtranCsfbSteeringS
witch and
UtranFreqLayerBlin
dSwitch are turned
on, the target cell is
selected based on
the priority specified
by this parameter.
The cell on the
UTRAN frequency
with the highest
priority is
preferentially
selected. If this
parameter is set to
Indicates whether
the coverage area
of a UTRAN
frequency is
continuous. The
parameter value
CONTINUOUS
indicates that the
coverage area is
continuous. The
parameter value
NON_CONTINUOU
S indicates that the
NO NO NO None
coverage area is
non-continuous.
Only neighboring
UTRAN cells
working at the
UTRAN frequency
that has continuous
coverage are
considered in the
determination of
candidate cells for
blind CSFB to
UTRAN.

Indicates the
priority of the
neighboring UTRAN
frequency for load
sharing with
UTRAN. The value
0 indicates the LOFD-
lowest priority. The NO NO NO 001032/TDLOFD-
neighboring UTRAN 001032
frequency with the
highest priority is
selected as the
target frequency for
inter-RAT load
sharing.
Indicates whether
the UARFCN is
specific to the
primary frequency
band. Among the
UARFCNs of the
same frequency, if
the
MasterBandFlag
parameter is set to
TRUE for one
UARFCN and
FALSE for other
UARFCNs, the
former UARFCN is
specific to the
primary frequency
band while the
LBFD-070103 /
latter UARFCNs are NO NO NO
TDLBFD-00201806
specific to
secondary
frequency bands. In
this case, only the
UARFCN specific to
the primary
frequency band is
broadcast in system
information block
type 6 (SIB6). If the
MasterBandFlag
parameter is set to
FALSE for all
UARFCNs of the
same frequency,
only the smallest
UARFCN is
broadcast in SIB6.
Indicates whether a
neighboring UTRAN
cell on the UTRAN
frequency is a
shared neighboring
UTRAN cell. If this
parameter is set to
BOOLEAN_TRUE,
the UTRAN
frequency is a
shared frequency,
and the shared
operator
information must be
checked on the
LOFD-
OSS before all
NO NO NO 002002/TDLOFD-
neighboring UTRAN
002002
cells are added. If
this parameter is
set to
BOOLEAN_FALSE,
the UTRAN
frequency is not a
shared frequency,
and the shared
operator
information does
not need to be
checked on the
OSS before all
neighboring UTRAN
cells are added.

Indicates whether
information about
neighboring UTRAN
cells and external
UTRAN cells
configured on the
frequency
associated with the
serving cell can be
maintained by ANR. LOFD-002002 /
NO NO NO
If this parameter is TDLOFD-002002
set to ALLOWED,
the information can
be maintained by
ANR. If this
parameter is set to
NOT_ALLOWED,
the information
cannot be
maintained by ANR.
priority of the
neighboring UTRAN
frequency, this is,
the priority for the
neighboring UTRAN
frequency to carry
SRVCC services.
During coverage-
based inter-RAT
SRVCC-based CS
service handovers
with
UtranFreqLayerMea
sSwitch being on,
the eNodeB selects
and delivers the
neighboring UTRAN
frequencies based
on the SRVCC NO NO NO LOFD-001087
priorities when
starting
measurements. The
eNodeB
preferentially
delivers the UTRAN
frequency with the
highest SRVCC
priority to measure.
If this parameter is
set to Priority_0,
this neighboring
UTRAN frequency
is not prioritized. A
larger number in
the parameter value
indicates that the
neighboring UTRAN

Indicates whether a
UTRAN frequency
is a frequency that
can be shared by
the UMTS and LTE.
If this parameter
value is
BOOLEAN_TRUE,
the UTRAN
frequency is a
NO NO NO None
frequency that can
be shared by the
UMTS and LTE. If
this parameter is
set to
BOOLEAN_FALSE,
the UTRAN
frequency is
dedicated to the
UMTS.
relationships based
on UTRAN
frequency priorities
and removes the
candidate neighbor
relationship with the
cell to which the
number of UEs
handed over from
the local cell is the
smallest.
Consider that all
values of this
parameter for all
UTRAN frequencies
are the same non-
zero value. If the
frequency serving
LOFD-002002 /
the cell whose NO NO NO
TDLOFD-002002
neighbor
relationship is to be
added has
neighboring cells
whose neighbor
relationships can be
removed, the
eNodeB removes
the neighbor
relationship with the
cell that operates
on this frequency
and to which the
number of UEs
handed over from
the local cell is the
smallest. If the
frequency does not

Indicates the mobile

country code of the
external UTRAN
cell.
The PLMN consists
of the MCC and the
MNC.
LOFD-001019 /
The MCC consists YES YES NO
TDLOFD-001019
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.
Indicates the mobile
network code of the
external UTRAN
cell.
The PLMN consists
of the MCC and the
MNC.
LOFD-001019 /
The MCC consists YES YES NO
TDLOFD-001019
of three digits.
The MNC consists
of two to three
digits.
For example, MCC
= 123, MNC = 45,
PLMN = 12345.

mode. The 28-bit

UTRAN cell ID is
comprised of the
RNC ID and the
RNC cell ID. If the
RNC ID is
represented in the
RNC-ID mode, the
28-bit UTRAN cell
ID is comprised of
the RNC ID and the
RNC cell ID that are
represented by the
most significant 12
bits and the least
significant 16 bits,
respectively. In this
case, the formula
for calculating the LOFD-001052 /
YES YES NO
UTRAN cell ID is as TDLOFD-001052
follows: UTRAN cell
ID = RNC ID x
65536 + RNC cell
ID. If the RNC ID is
represented in the
extended RNC-ID
mode, the 28-bit
UTRAN cell ID is
comprised of the
RNC ID and the
RNC cell ID that are
represented by the
most significant 16
bits and the least
significant 12 bits,
respectively. In this
case, the formula
for calculating the
represented in the
RNC-ID or
extended RNC-ID
mode. If the RNC
ID is represented in
the RNC-ID mode,
the 28-bit UTRAN
cell ID is comprised
of the RNC ID and
the RNC cell ID that
are represented by
the most significant
12 bits and the
least significant 16
bits, respectively. In
this case, the
formula for
calculating the
LOFD-001019 /
UTRAN cell ID is as YES YES NO
TDLOFD-001019
follows: UTRAN cell
ID = RNC ID x
65536 + RNC cell
ID. If the RNC ID is
represented in the
extended RNC-ID
mode, the 28-bit
UTRAN cell ID is
comprised of the
RNC ID and the
RNC cell ID that are
represented by the
most significant 16
bits and the least
significant 12 bits,
respectively. In this
case, the formula
for calculating the
[4357-4458]
Special UARFCNs:
(1007, 1012, 1032,
1037, 1062, 1087)
Band 6:
Normal UARFCNs:
[4387-4413]
Special UARFCNs:
(1037, 1062)
Band 7:
Normal UARFCNs:
[2237-2563]
Special UARFCNs:
(2587, 2612, 2637,
2662, 2687, 2712,
2737, 2762, 2787,
2812, 2837, 2862,
2887, 2912)
Band 8: LOFD-001019 /
NO YES NO
Normal UARFCNs: TDLOFD-001019
[2937-3088]
Special UARFCNs:
none
Band 9:
Normal UARFCNs:
[9237-9387]
Special UARFCNs:
none
The UARFCN
range in each TDD
frequency band is
shown as follows:
Band 1:
Normal UARFCNs:
[9500-9600] and
[10050-10125]
Special UARFCNs:
none
follows if the DL
frequency is a
normal one:
Band 1: UL
UARFCN = DL
UARFCN - 950;
Band 2: UL
UARFCN = DL
UARFCN - 400;
Band 3: UL
UARFCN = DL
UARFCN - 475;
Band 4: UL
UARFCN = DL
UARFCN - 2000;
Band 5: UL
UARFCN = DL
UARFCN - 225;
Band 6: UL LOFD-001019 /
NO NO NO
UARFCN = DL TDLOFD-001019
UARFCN - 225;
Band 7: UL
UARFCN = DL
UARFCN - 600;
Band 8: UL
UARFCN = DL
UARFCN - 225;
Band 9: UL
UARFCN = DL
UARFCN - 475;
The default UL
UARFCN is
calculated as
follows if the DL
frequency is a
special one:
Band 2: UL
UARFCN = DL
[4132-4233]
Special UARFCNs:
(782, 787, 807,
812, 837, 862)
Band 6:
Normal UARFCNs:
[4162-4188]
Special UARFCNs:
(812, 837)
Band 7:
Normal UARFCNs:
[2012-2338]
Special UARFCNs:
(2362, 2387, 2412,
2437, 2462, 2487,
2512, 2537, 2562,
2587, 2612, 2637,
2662, 2687)
Band 8:
NO NO NO None
Normal UARFCNs:
[2712-2863]
Special UARFCNs:
none
Band 9:
Normal UARFCNs:
[8762-8912]
Special UARFCNs:
none
The UARFCN
range in each TDD
frequency band is
shown as follows:
Band 1:
Normal UARFCNs:
[9500-9600] and
[10050-10125]
Special UARFCNs:
none

Indicates the duplex

LOFD-001019 /
mode of the NO NO NO
TDLOFD-001019
UTRAN cell.
Indicates whether
to set the routing
area code (RAC) of
the external UTRAN
cell. This parameter
LOFD-001019 /
must be set to NO NO NO
TDLOFD-001019
CFG(Configure) if
the external UTRAN
cell supports packet
switched (PS)
services.

LOFD-001019 /
TDLOFD-001019
LOFD-001034 /
TDLOFD-001034
Indicates the LOFD-001052 /
NO NO NO
routing area code. TDLOFD-001052
TDLOFD-001033
TDLOFD-001043
TDLOFD-001072
TDLOFD-001078

Indicates the
primary DL
scrambles of the LOFD-001019 /
NO YES NO
external UTRAN TDLOFD-001019
cell. For details, see
3GPP TS 25.331.

LOFD-001022 /
Indicates the LAC TDLOFD-001022
of the external NO YES NO LOFD-001068 /
UTRAN cell. TDLOFD-001068
TDLOFD-001078
Indicates the name
LOFD-001019 /
of the external NO NO NO
TDLOFD-001019
UTRAN cell.

Indicates whether
the external UTRAN
cell supports single
radio voice call
continuity (SRVCC)
for concurrent CS LOFD-001022 /
and PS services. If TDLOFD-001022
this parameter is NO NO NO LOFD-001019 /
set to TDLOFD-001019
BOOLEAN_FALSE, TDLOFD-001078
the external UTRAN
cell does not
support SRVCC for
concurrent CS and
PS services.
an external UTRAN
cell. If the operating
frequency of an
external UTRAN
cell belongs to
multiple frequency
bands, the downlink
frequency of the
frequency band
with the highest
priority is configured
by the UtranDlArfcn
parameter, and
frequency bands
with other priorities
are configured by
the
UtranExternalCellSl
aveBand parameter LBFD-070103 /
NO YES NO
and added in TDLBFD-00201806
descending order
based on frequency
band priorities. The
frequency band
priorities of an
external UTRAN
cell are determined
in network planning.
It is recommended
that the frequency
bands supporting
UEs that comply
with 3GPP TS
36.331 V8.16.0,
3GPP TS 36.331
V9.1.0, 3GPP TS
36.331 V10.5.0, or
a later vision be

Indicates the
frequency band in
which the cell
operates. For YES YES NO None
details about this
parameter, see
3GPP TS 36.104.
can be selected for
handovers during
roaming. This
parameter is set to
NO(No) by default.
If this parameter is
set to YES(Yes),
this neighboring cell
can be selected for
handovers during
roaming. If this
parameter is set to
NO(No), this
neighboring cell
cannot be selected
for handovers
during roaming.
If the PLMN of the
LOFD-00105401 /
neighboring cell is NO NO NO
TDLOFD-00105401
included in the
SPID-based
handover-allowable
HPLMN list or this
parameter is set to
YES(Yes), this
neighboring cell can
be selected for
handovers.
In the boundaries of
roaming areas and
non-roaming areas,
you are advised to
set this parameter
to YES(Yes) to
ensure that
neighboring cells in
roaming areas can
MANUAL_MODE,
the ANR-related
MOs can be
modified or
removed by only
the user. A failure
message is
displayed when the
user adds an
existing MO. When
this parameter is
set to
AUTO_MODE, the
ANR-related MOs
can be modified or
removed by the
user or based on
the ANR algorithm.
LOFD-002002 /
The MO removal is NO NO NO
LOFD-002002
successful even if
the MO does not
exist. An MO can
be added both by
the user and based
on the ANR
algorithm. If an
existing MO is to be
added, the MO is
modified when the
user performs the
addition, but it
cannot be added
based on the ANR
algorithm. When
the ANR-related
MOs are
automatically added

Indicates the ID of
the baseband
collaboration group.
It uniquely identifies YES YES NO None
a baseband
collaboration group
in an eNodeB.
Indicates the ID of
the baseband
equipment that is
associated with the
LTE baseband
collaboration group.
During the
establishment of
the LTE baseband
collaboration group,
baseband
processing units
(BBPs) in a BBU NO YES NO None
are added to a set
of baseband
equipment, and the
ID of the baseband
equipment is
associated with the
LTE baseband
collaboration group
ID. In this way, the
BBPs are added to
the LTE baseband
collaboration group.
Balancing Mode
Enabled) indicates
that the BBP is
involved in load
balancing. If this
BBP is a primary
BBP, UEs on this
BBP can be
transferred to the
secondary BBP. If
this BBP is the
secondary BBP, this
BBP can accept
UEs transferred
from primary BBPs.
The value
LOAD_BALANCE_
MODE_CLOSED(L
oad Balancing NO NO YES None
Mode Disabled)
indicates that this
BBP is not allowed
to transfer loads to
another BBP or
accept loads
transferred from
other BBPs.
The value
LOAD_BALANCE_
MODE_UNAVAILA
BLE(Load
Balancing Mode
Unavailable)
indicates that load
balancing is
unavailable for the
BBP.
The value
BBP_CATEGORY_
NOT_SUPPORTED
(BBP Category Not
Supported)
indicates that the
BBP does not
support baseband
collaboration.
The value
BBP_STATUS_AB
NORMAL(BBP
Status Abnormal)
indicates that the
BBP is abnormal
and cannot be
selected for
baseband
collaboration.
NO NO YES None
The value
WORK_MODE_NO
T_SUPPORTED(W
ork Mode Not
Supported)
indicates that the
BBP is a multi-
mode BBP and
does not support
baseband
collaboration.
The value NULL is
displayed when the
BbpLoadBalanceSt
atus parameter
value is not
LOAD_BALANCE_
MODE_UNAVAILA
BLE(Load
Indicates the role of
a BBP in an LTE
baseband
collaboration group.
If the parameter
value is Primary
BBP, the BBP is a
primary BBP. The
primary BBP
transfers certain
UEs to the
secondary BBP. NO NO YES None
If the parameter
value is Secondary
BBP, the BBP is a
secondary BBP and
takes over partial
load of primary
BBPs.
If the parameter
value is NULL, the
BBP is not in the
load sharing state.

Indicates the
number of the
cabinet where a
BBP in the LTE NO NO YES None
baseband
collaboration group
is installed.

Indicates the
number of the
subrack where a
BBP in the LTE NO NO YES None
baseband
collaboration group
is installed.

Indicates the
number of the slot
where a BBP in the
NO NO YES None
LTE baseband
collaboration group
is installed.
Indicates the
waiting time for
blocking an LTE
baseband
collaboration group
when the
BlockPriority
parameter is set to
MIDDLE_PRIORIT
Y_BLOCK(Middle
Priority Block). The
LTE baseband
collaboration group
is blocked
immediately once NO NO NO None
there is no UE
transferred from
LBBPc boards to
the UBBPd within
the timer length. If
there are such UEs
within the timer
length, the UEs are
released after the
timer expires, and
then the LTE
baseband
collaboration group
is blocked.
Indicates the load
threshold of a BBP,
LTE baseband
collaboration on a
NO NO NO None
BBP is enabled
when the load of
the BBP is greater
than this threshold.
Indicates the load
threshold of a BBP,
LTE baseband
collaboration on a
NO NO NO None
BBP is disabled
when the load of
the BBP is lower
than this threshold.
is blocked
immediately and
the UEs transferred
from LBBPc boards
to the UBBPd are
released
immediately. If this
parameter is set to
MIDDLE_PRIORIT
Y_BLOCK(Middle
Priority Block), the
BbpCollaborateBloc
kTimer parameter
needs to be set.
The LTE baseband
collaboration group
is blocked
immediately once
there is no UE
NO NO NO None
transferred from
LBBPc boards to
the UBBPd within
the timer length. If
there are such UEs
within the timer
length, the UEs are
released after the
timer expires, and
then the LTE
baseband
collaboration group
is blocked. If this
parameter is set to
LOW_PRIORITY_B
LOCK(Low Priority
Block), the LTE
baseband
collaboration group
Indicates the length
for detecting
service abnormality
when the devices
are suspected to
experience soft
failures. If service
abnormality persists
LOFD-
within the period of
NO NO NO 002012/TDLOFD-
time specified by
002012
this parameter while
the devices are
suspected to
experience soft
failures, the devices
are considered to
experience soft
failures.
S1(S1): When ALM-
29201 S1 Interface
Fault and ALM-
25888 SCTP Link
Fault about an S1
interface are
generated at the
same time:
- If this option is
selected, ALM-
29201 S1 Interface
Fault is reported
and ALM-25888
SCTP Link Fault is
masked.
- If this option is
deselected, ALM-
25888 SCTP Link
Fault is also NO NO NO None
reported.
X2(X2): When ALM-
29204 X2 Interface
Fault and ALM-
25888 SCTP Link
Fault about an X2
interface are
generated at the
same time:
- If this option is
selected, ALM-
29204 X2 Interface
Fault is reported
and ALM-25888
SCTP Link Fault is
masked.
- If this option is
deselected, ALM-
 TDLBFD-001007
Indicates the offset
TDLBFD-00100701
of the start time of a
TDLBFD-00100702
cell frame against a
TDLOFD-001026
reference clock
NO NO NO TDLOFD-00102601
source. This offset
TDLOFD-00102602
applies to all LTE
TDLOFD-00102603
TDD cells served by
MRFD-101231
an eNodeB.
MRFD-101222

Indicates the offset

of the start time of a
cell frame against a
reference clock MRFD-101231
NO NO NO
source. This offset MRFD-101222
applies to all LTE
FDD cells served by
an eNodeB.
Indicates the policy
of controlling
parameters related
to baseband
equipment IDs
based on the
automatic BBP
resource allocation
algorithm. If this
parameter is set to
ON(On), the
eNodeB
automatically
changes the
NO NO NO None
BASEBANDEQMID
parameter value to
bind baseband
resources serving
cells with the cells
after all cells are
activated. Note that
the automatic BBP
resource allocation
algorithm takes
effect only after a
BaseBandEqm MO
is configured for
each BBP.
baseband resource
allocation policy for
TDD cells. If this
parameter is set to
RESOURCE_PRIM
ARY(RESOURCE_
PRIMARY),
baseband
resources are
primarily allocated
based on the
minimum resource
allocation policy,
ensuring that more
cells can be
allocated baseband
resources. If this
parameter is set to
LOAD_BALANCE(L
NO NO NO None
OAD_BALANCE),
the eNodeB
allocates baseband
resources to cells
based on cell loads
to ensure that a cell
obtains maximum
allowed baseband
resources. If this
parameter is set to
EADAPTIVE(ADAP
TIVE), the eNodeB
automatically
allocates baseband
resources to cells
based on the
number of cells.
This parameter
applies only to LTE
baseband resource
allocation policy for
FDD cells. If this
parameter is set to
RESOURCE_PRIM
ARY(RESOURCE_
PRIMARY),
baseband
resources are
primarily allocated
based on the
minimum resource
allocation policy,
ensuring that more
cells can be
allocated baseband
resources. If this
parameter is set to
LOAD_BALANCE(L NO NO NO None
OAD_BALANCE),
the eNodeB
allocates baseband
resources to cells
based on cell loads
to ensure that a cell
obtains maximum
allowed baseband
resources. If this
parameter is set to
EADAPTIVE(ADAP
TIVE), the eNodeB
automatically
allocates baseband
resources to cells
based on the
number of cells.
This option applies
Indicates the period
of time that a cell
fails to activate on
the bound BBP. If
the period of time is
greater than this
parameter value
when the
BbpResAutoConfig
Sw parameter is set NO NO NO None
to ON(On), the
eNodeB
automatically
allocates available
baseband
resources to the
cell until the cell is
successfully
activated.
Indicates the start
time to write the
changes generated
by the automatic
grouping
configuration
function of SON
into the database,
including
overlapping
indicator changes
of inter-frequency
neighboring cells or
the switch status
NO NO NO LOFD-110219
changes of the cell
to which intra-
frequency
neighboring cells
belong. The results
calculated by the
automatic grouping
configuration
function are written
into the database
after the time in the
system reaches the
start time specified
by this parameter.

Indicates the ID of
the baseband
equipment used by
the centralized
clustering node. If
this parameter is
NO NO NO None
set to 255, the
baseband
equipment used by
the centralized
clustering node is
not specified.
Indicates the
coordinated
scheduling mode of
the baseband
equipment. If this
parameter is set to
COORDINATED_S
CHEDULING_ONLY
, the baseband
equipment supports
only coordinated
scheduling. If this
parameter is set to NO NO NO None
COORDINATED_S
CHEDULING_MIXI
NG, the baseband
equipment supports
both universal
baseband
processing and
coordinated
scheduling, and this
workmode applies
only to LTE TDD
mode.

Indicates the
interval between
the time that the
eNodeB reports
measurement
information and the
NO NO NO TDLAOFD-081411
time that the
coordinated
information
delivered to the
eNodeB takes
effect.
Indicates whether
to enable inter-
eNodeB DL CoMP
in cells under the NO NO NO TDLAOFD-081411
centralized control
node in Cloud BB
scenarios.

Indicates the
number of UEs
scheduled by the NO NO NO TDLAOFD-081411
centralized control
node.

Indicates whether
the interval
between the time
that the eNodeB
reports
measurement
information and the
time that the
NO NO NO TDLAOFD-081411
coordinated
information
delivered to the
eNodeB takes
effect is fixedly
configured or
periodically
measured.
Indicates whether
to enable inter-
eNodeB
coordinated uplink
AMC in the
NO NO NO TDLOFD-110206
centralized Cloud
BB networking. This
parameter applies
only to LTE TDD
networks.
LBBP_LARGE_CA
PACITY applies
only to LBBPd3
boards. Compared
with the parameter
value NORMAL, the
parameter value
LBBP_LARGE_CA
PACITY enables an
LBBPd3 to support
more 2T4R cells
with a bandwidth of
20 MHz per cell but
fewer features for
the cells. Before
setting this
parameter to
LBBP_LARGE_CA
PACITY, disable the
NO NO NO None
following features:
high speed
mobility,ultra high
speed mobility,
extended CP, intra-
subframe frequency
hopping, and
PUCCH-based
uplink timing. All
cells established on
the LBBPd3 are
reactivated after
this parameter is
set to
LBBP_LARGE_CA
PACITY. If PUCCH-
based uplink timing
is enabled and then
this parameter is
Indicates the
operating mode of
single frequency
network (SFN)
cells. This eNodeB-
level parameter
applies to LTE FDD
eNodeBs equipped
with LBBPd or
UBBPd boards.
If this parameter is
set to NORMAL, an
SFN cell with a
bandwidth of 10
MHz supports a
maximum of 400
UEs, and an SFN
cell with a NO NO NO None
bandwidth of 5 MHz
supports a
maximum of 200
UEs.
If this parameter is
set to
LARGECAPABILIT
Y, an SFN cell with
a bandwidth of 10
MHz supports a
maximum of 1200
UEs, and an SFN
cell with a
bandwidth of 5 MHz
supports a
maximum of 600
UEs.
Indicates whether
to prohibit the
eNodeB from
setting up the cell
sector equipment or
sector equipment
group (that is not
bound to a piece of
baseband
equipment) on the
baseband
equipment that has
been bound to
other cell sector
equipment or sector
equipment group. If
this parameter is NO NO NO None
set to ON(On), the
sector equipment or
sector equipment
group that is not
bound to the
baseband
equipment cannot
be set up on this
baseband
equipment if other
sector equipment or
sector equipment
group has been
bound to the
baseband
equipment.

Indicates the ID of
an intelligent LOFD-081205
YES YES NO
optimization atom TDLOFD-081209
rule.

Indicates the
measurement
object type in
intelligent
optimization atom
rules. If this
parameter is set to
Cell, the
LOFD-081205
measurement NO NO NO
TDLOFD-081209
objects are cell-
level atom rules. If
this parameter is
set to eNodeB, the
measurement
objects are
eNodeB-level atom
rules.
Indicates the
relationship
between
measurement
objects and
thresholds in
intelligent
optimization atom
rules. The
parameter values
BIGGERTHAN,
EQUALTO,
SMALLERTHAN,
LOFD-081205
SMALLERTHANOR NO NO NO
TDLOFD-081209
EQUALTO,
BIGGERTHANORE
QUALTO, and
NOTEQUALTO
indicate the
conditions of
greater than, equal
to, smaller than,
smaller than and
equal to, greater
than and equal to,
and not equal to,
respectively.

Indicates the
threshold for
selecting
measurement
LOFD-081205
objects with NO NO NO
TDLOFD-081209
numerical values in
intelligent
optimization atom
rules.
measurement
object of an
intelligent
optimization rule.
USER_SPEC_OCC
UPY_RATE
indicates the
proportion of UL-
sync UEs.
UL_PRB_UTILIZAT
ION_RATE
indicates the uplink
PRB usage.
DL_PRB_UTILIZAT
ION_RATE
indicates the
downlink PRB
usage.
PDCCH_CCE_UTIL LOFD-081205
NO NO NO
IZATION_RATE TDLOFD-081209
indicates the
PDCCH CCE
usage.
ENB_USER_SPEC
_EQU_OCCUPY_R
ATE indicates the
maximum
proportion of UL-
sync UEs in one
cell or all cells
served by a BBP
within an eNodeB.
USER_SPEC_OCC
UPY_RATE(Baseba
nd Board) indicates
the proportion of
UL-sync UEs in all
cells served by a
Indicates the ID of
the intelligent LOFD-081205
YES YES NO
optimization TDLOFD-081209
feature.

Indicates the name

of the intelligent LOFD-081205
NO NO NO
optimization TDLOFD-081209
feature.

Indicates the ID of
the intelligent LOFD-081205
YES YES NO
optimization TDLOFD-081209
function.
Indicates the name
of the intelligent LOFD-081205
NO NO NO
optimization TDLOFD-081209
function.

Indicates the ID of
the intelligent LOFD-081205
NO NO NO
optimization TDLOFD-081209
feature.

Indicates the
measurement
object type in
intelligent
optimization atom
rules. If this
parameter is set to
Cell, the
LOFD-081205
measurement NO NO NO
TDLOFD-081209
objects are cell-
level atom rules. If
this parameter is
set to eNodeB, the
measurement
objects are
eNodeB-level atom
rules.
Indicates the ID of
the cell with which
intelligent
optimization atom
rules are applied.
This parameter can
only be queried by
running the DSP
LIOPTFUNCTION
command.
Information
LOFD-081205
displayed in the NO NO YES
TDLOFD-081209
DSP
LIOPTFUNCTION
command output is
specific to the cell.
This parameter
setting does not
take effect when
the
MeasureObjType
parameter is set to
eNodeB.

Indicates the status

of intelligent
optimization atom
rules. This
parameter can only
be queried by
running the DSP
LIOPTFUNCTION
command. If this
parameter value is
NORMAL, the
LOFD-081205
intelligent NO NO YES
TDLOFD-081209
optimization is in
the normal state. If
this parameter
value is PENALTY,
the intelligent
optimization is
under penalty, and
all related intelligent
optimization
measures cannot
be taken.

Indicates the ID of
LOFD-081205
an intelligent YES YES NO
TDLOFD-081209
optimization rule.
Indicates the ID of
the local cell with
intelligent
optimization rules
applied. This
parameter can only
be queried by
running the DSP
LIOPTRULE
command. In the
DSP LIOPTRULE
command output,
the displayed Local
Cell ID parameter
value presents the
specified cell with
intelligent LOFD-081205
NO NO YES
optimization rules TDLOFD-081209
applied. If the
intelligent
optimization rules
take effect on the
eNodeB level, an
invalid Local Cell ID
parameter value is
displayed in the
command output. If
the value of Local
Cell ID is displayed
as 65535, this
intelligent
optimization rule
takes effect on the
eNodeB level.

Indicates the type

of parameter
adjustment when
the trigger
conditions in an
intelligent
optimization rule
are met. If this
parameter is set to
MODIFY, the
LOFD-081205
intelligent NO NO NO
TDLOFD-081209
optimization rule is
used to modify
parameters. If this
parameter is set to
RESUME, the
intelligent
optimization rule is
used to restore
parameters to the
initial settings.
Indicates the type
of relationships
between atom rules
under an intelligent
optimization rule. If
this parameter is
set to AND,
optimization actions
corresponding to
the intelligent
optimization rule
are triggered only
when all atom rules
under this intelligent
LOFD-081205
optimization rule NO NO NO
TDLOFD-081209
meet related
requirements. If this
parameter is set to
OR, optimization
actions
corresponding to
the intelligent
optimization rule
are triggered when
any atom rule under
this intelligent
optimization rule
meets related
requirements.

Indicates the
evaluation period of LOFD-081205
NO NO NO
an intelligent TDLOFD-081209
optimization rule.

Indicates a
parameter
adjustment action
corresponding to an
intelligent
optimization rule.
Note: When a
network is no
longer heavily
LOFD-081205
loaded, restore the NO NO NO
TDLOFD-081209
parameter value to
the pre-optimization
GUI value. The
corresponding
value of ActionType
is RESUME and the
corresponding
value of Action is
NULL.
Indicates the ID of
the intelligent LOFD-081205
NO NO NO
optimization TDLOFD-081209
function.

Indicates the
penalty duration of
intelligent
optimization rules
under an intelligent
optimization
function. If related
conditions for an
intelligent
optimization rule
under an intelligent
optimization
function are met
and related
adjustment
measures are
taken, the penalty
duration starts. LOFD-081205
NO NO NO
During the penalty TDLOFD-081209
duration, parameter
adjustment cannot
be triggered even if
conditions for an
intelligent
optimization rule
under this intelligent
optimization
function are met. If
this parameter is
set to 0, no penalty
is imposed on
intelligent
optimization rules
under an intelligent
optimization
function.
Indicates the duplex
mode to which an
intelligent
optimization rule
applies. If this
parameter is set to
FDD, the intelligent
optimization rule
applies to FDD. If
this parameter is LOFD-081205
NO NO NO
set to TDD, the TDLOFD-081209
intelligent
optimization rule
applies to TDD. If
this parameter is
set to BOTH, the
intelligent
optimization rule
applies to both FDD
and TDD.

Indicates whether
an intelligent
optimization rule is
activated. If the
parameter value is
set to ACTIVATED,
the intelligent
optimization rule is
LOFD-081205
activated. If the NO NO NO
TDLOFD-081209
parameter value is
set to
DEACTIVATED, the
intelligent
optimization rule is
deactivated and
does not take
effect.
Indicates the state
of parameter
adjustment
corresponding to an
intelligent
optimization rule.
This parameter can
only be queried by
running the DSP
LIOPTRULE
command. If this
parameter value is
UN-EXECUTED, LOFD-081205
NO NO YES
parameter TDLOFD-081209
adjustment is not
performed. If this
parameter value is
EXECUTING,
parameter
adjustment is being
performed. If this
parameter is
EXECUTED,
parameter
adjustment has
been performed.

Indicates the ID of
the intelligent
optimization rule to
LOFD-081205
which the intelligent YES YES NO
TDLOFD-081209
optimization rule
members
associated.

Indicates the ID of
the intelligent
optimization atom
rule to which the LOFD-081205
YES YES NO
intelligent TDLOFD-081209
optimization rule
members
associated.
Indicates whether
an intelligent
optimization rule
member is
activated. If this
parameter is set to
ACTIVATED, the
intelligent
optimization atom
rules apply to the
evaluation of the
associated LOFD-081205
NO NO NO
intelligent TDLOFD-081209
optimization rule. If
this parameter is
set to
DEACTIVATED, the
intelligent
optimization atom
rules do not apply
to the evaluation of
the associated
intelligent
optimization rule.

Indicates the listed

mobile country
code (MCC) of a
neighboring cell. An
MCC is a string of YES YES NO None
three decimal digits,
each of which must
be a digit ranging
from 0 to 9.

Indicates the listed

mobile network
code (MNC) of the
listed PLMN of a
neighboring cell. An
MNC is a string of YES YES NO None
two or three
decimal digits, each
of which must be a
digit ranging from 0
to 9.

Indicates the RAT

of the neighboring
YES YES NO None
cell corresponding
to the PLMN.
cannot be
configured as a
neighboring cell or
an external cell by
ANR. If this
parameter is set to
GREY_LIST(GREY
_LIST), the cell
corresponding to a
gray-listed PLMN
can be added as a
neighboring cell
and an external cell
by ANR, and the
ANR marks a
PLMN gray list label
on the neighboring
cell. If this
parameter is set to
NO NO NO None
WHITE_LIST(WHIT
E_LIST), the cell
corresponding to a
white-listed PLMN
can be added as a
neighboring cell
and an external cell
by ANR, and the
ANR marks a
PLMN white list
label on the
neighboring cell.
This parameter is
allowed to be set to
only two values for
all E-UTRAN,
UTRAN, or GERAN
cells whose PLMNs
are in the PLMN

Indicates the
LAOFD-00100101
downlink E-UTRA
LAOFD-00100102
absolute radio
LAOFD-00100201
frequency channel YES YES NO
LAOFD-00100202
number (EARFCN)
LAOFD-070201
of the candidate
LAOFD-070202
PCC.
Indicates the
priority with which
the candidate PCC
is selected as the
PCC. The priority
level has a positive
correlation with the
parameter value.
This parameter is LAOFD-00100101
valid only if the LAOFD-00100102
IdleModePccAncho LAOFD-00100201
NO NO NO
rSwitch(IdleModePc LAOFD-00100202
cAnchorSwitch), LAOFD-070201
PccAnchorSwitch(P LAOFD-070202
ccAnchorSwitch), or
EnhancedPccAnch
orSwitch(Enhanced
PccAnchorSwitch)
option of the
CaAlgoSwitch
parameter is
selected.

Indicates the
reference signal
LAOFD-00100101
received power
LAOFD-00100102
(RSRP) threshold
LAOFD-00100201
for triggering event NO NO NO
LAOFD-00100202
A4 during higher-
LAOFD-070201
priority carrier
LAOFD-070202
evaluation for PCC
selection.
Indicates the
reference signal
received quality
(RSRQ) threshold
for triggering event
A4 during higher-
priority carrier
evaluation for PCC
LAOFD-00100101
selection in
LAOFD-00100102
scenarios where CA
LAOFD-00100201
is configured based NO NO NO
LAOFD-00100202
on frequencies. If
LAOFD-070201
the measured
LAOFD-070202
RSRQ of an inter-
frequency
neighboring cell in
the CA group is
greater than this
parameter value,
the CA UE reports
event A4.

Indicates the
identity of a passive
intermodulation
(PIM) cell group. It
uniquely identifies a
PIM cell group
within an eNodeB.
A PIM cell group
consists of two cells
sharing an antenna
system. If the LPMP YES YES NO None
is used to perform
PIM interference
rejection, two cells
sharing an antenna
system must be
added to a PIM cell
group.
This parameter
applies only to FDD
macro eNodeBs.

Indicates the local

identity of cell 1 in
the passive NO YES NO None
intermodulation
(PIM) cell group.

Indicates the local

identity of cell 2 in
the passive NO YES NO None
intermodulation
(PIM) cell group.
Indicates the sector
equipment identity
of cell 1 in the
NO YES NO None
passive
intermodulation
(PIM) cell group.

Indicates the sector

equipment identity
of cell 2 in the
NO YES NO None
passive
intermodulation
(PIM) cell group.
Indicates the PIM
state of cell 1 in the
passive NO NO YES None
intermodulation
(PIM) cell group.
Indicates the PIM
state of cell 2 in the
passive NO NO YES None
intermodulation
(PIM) cell group.

Indicates the LAOFD-00100101

downlink E-UTRA LAOFD-00100102
absolute radio LAOFD-00100201
YES YES NO
frequency channel LAOFD-00100202
number (EARFCN) LAOFD-070201
of the PCC. LAOFD-070202
 LAOFD-00100101
Indicates the LAOFD-00100102
downlink EARFCN LAOFD-00100201
YES YES NO
of the candidate LAOFD-00100202
SCC. LAOFD-070201
LAOFD-070202

Indicates the
priority with which
the candidate SCC
LAOFD-00100101
works as an SCC
LAOFD-00100102
for that PCC. A
LAOFD-00100201
smaller value of this NO NO NO
LAOFD-00100202
parameter indicates
LAOFD-070201
a lower priority, and
LAOFD-070202
a larger value
indicates a higher
priority.

Indicates the offset

of the actual
threshold for CA
event A2relative to
the value of the
CarrAggrA2ThdRsr
LAOFD-00100101
p parameter in the
LAOFD-00100102
CaMgtCfg MO. If
LAOFD-00100201
the actual threshold NO NO NO
LAOFD-00100202
is greater than -43
LAOFD-070201
dBm, the value of
LAOFD-070202
-43 dBm takes
effect. If the actual
threshold is less
than -140 dBm, the
value of -140 dBm
takes effect.
Indicates the offset
of the actual
threshold for CA
event A4 relative to
the value of the
CarrAggrA4ThdRsr
LAOFD-00100101
p parameter in the
LAOFD-00100102
CaMgtCfg MO. If
LAOFD-00100201
the actual threshold NO NO NO
LAOFD-00100202
is greater than -43
LAOFD-070201
dBm, the value of
LAOFD-070202
-43 dBm takes
effect. If the actual
threshold is less
than -140 dBm, the
value of -140 dBm
takes effect.

of blind SCell
configuration for a
cell. The automatic
grouping for carrier
aggregation
function compares
the measured
coverage overlap
proportion of an
inter-frequency
neighboring cell
and the serving cell
with this parameter
value. If the
coverage overlap
proportion is
greater than or
equal to this
parameter value, NO NO NO LOFD-110219
the inter-frequency
neighboring cell can
be configured as an
SCell for the UE in
a blind manner and
a flag used to
identify the support
of blind SCell
configuration is
added or modified
for the inter-
frequency
neighboring cell.
A smaller value of
this parameter
indicates a lower
coverage overlap
requirement for
threshold for
removing a flag
used to identify the
support of blind
SCell configuration
from a cell. The
automatic grouping
for carrier
aggregation
function compares
the measured
coverage overlap
proportion of an
inter-frequency
neighboring cell
and the serving cell
with this parameter
value. If a flag used
to identify the NO NO NO LOFD-110219
support of blind
SCell configuration
is added for the
inter-frequency
neighboring cell
and the coverage
overlap proportion
is less than this
parameter value,
the flag is
removable.
A smaller value of
this parameter
results in a lower
probability of
clearing the flag. A
larger value results
in a higher
Indicates the
control policy of the
flag used to identify
whether a cell can
be configured as an
SCell in a blind
manner.
If this parameter is
set to AUTO(Auto),
the automatic
grouping of carrier
aggregation
function can add,
modify, or remove
NO NO NO LOFD-110219
the flags used to
identify whether
cells operating on
an SCC can be
configured as
SCells in a blind
manner.
If this parameter is
set to
MANUAL(Manual),
the flags can only
be manually added,
modified, or
removed.

Indicates the ID of
an SPID group,
which identifies a
group of UEs
whose SPIDs
belong to the same
group. If this
parameter is set to TDLOFD-00105401
a value ranging TDLOFD-001059
from 0 to 255, the TDLAOFD-001002
eNodeB does not TDLAOFD-
configure certain 00100102
NO NO NO
candidate SCCs of TDLAOFD-070201
UEs that belong to TDLAOFD-
the identified SPID 00100111
group as SCCs for MRFD-101231
CA. If this TDLAOFD-110401
parameter is set to
65535, SCCs are
normally configured
for UEs. This
parameter applies
only to LTE TDD
networks.
Indicates queue
scheduling weight
LOFD-
0. A larger
NO NO NO 081202/LOFD-
parameter value
081203
indicates a higher
priority.

Indicates queue
scheduling weight
LOFD-
1. A larger
NO NO NO 081202/LOFD-
parameter value
081203
indicates a higher
priority.

Indicates queue
scheduling weight
LOFD-
2. A larger
NO NO NO 081202/LOFD-
parameter value
081203
indicates a higher
priority.

Indicates queue
scheduling weight
LOFD-
3. A larger
NO NO NO 081202/LOFD-
parameter value
081203
indicates a higher
priority.

Indicates queue
scheduling weight
LOFD-
4. A larger
NO NO NO 081202/LOFD-
parameter value
081203
indicates a higher
priority.

Indicates queue
scheduling weight
LOFD-
5. A larger
NO NO NO 081202/LOFD-
parameter value
081203
indicates a higher
priority.

Indicates queue
scheduling weight
LOFD-
6. A larger
NO NO NO 081202/LOFD-
parameter value
081203
indicates a higher
priority.

Indicates queue
scheduling weight
LOFD-
7. A larger
NO NO NO 081202/LOFD-
parameter value
081203
indicates a higher
priority.
cell by ANR based
on the handover
success rate. The
threshold is the
percentage of the
number of
successful
handovers to the
total number of
handovers from the
local cell to the
neighboring cell.
For example, an
external cell is
configured as a
neighboring cell for
all cells under an
eNodeB, this
LOFD-002001 /
neighboring cell NO NO NO
TDLOFD-002001
permits automatic
removal of the
neighboring
relationship by ANR
and the ctrlmode is
Auto_Mode. If the
success rate of
handovers from
each cell under the
eNodeB to this
neighboring cell is
lower than or equal
to this threshold
after a
measurement
period, the
corresponding
external
Indicatescell
theand
total
number of
handovers to a
neighboring cell
above which ANR
determines whether
to remove the
neighbor
relationship with
LOFD-002001 /
this cell from the NO NO NO
TDLOFD-002001
NRT or set the
NoHoFlag
parameter for this
cell to
FORBID_HO_ENU
M(Forbid Ho) on the
basis of the
handover success
rate.
Indicates the length
of a measurement
period. Based on
the handover
success rate
collected within a
measurement
period, ANR
determines whether
LOFD-002001 /
to remove a NO NO NO
TDLOFD-002001
neighbor
relationship with a
neighboring cell
from the NRT or set
the NoHoFlag
parameter for the
neighboring cell to
FORBID_HO_ENU
M(Forbid Ho).

Indicates the
LOFD-002001 /
number of periodic
TDLOFD-002001
measurement NO NO NO
LOFD-002002 /
reports sent for fast
TDLOFD-002002
ANR.

Indicates the
interval at which LOFD-002001 /
periodic TDLOFD-002001
NO NO NO
measurement LOFD-002002 /
reports are sent for TDLOFD-002002
fast ANR.
Indicates the fast
ANR checking
timer. When the LOFD-002001 /
timer is expired, the TDLOFD-002001
NO NO NO
eNodeB LOFD-002002 /
automatically TDLOFD-002002
checks whether to
disable fast ANR.

Indicates the
reference signal
received power
(RSRP) threshold
for intra-RAT fast
ANR. If the signal
quality in a
neighboring E- LOFD-002001 /
NO NO NO
UTRAN cell TDLOFD-002001
reported by the UE
is lower than the
threshold, the cell is
not automatically
added as an
external cell of the
eNodeB.
Indicates the
maximum allowed
number of UEs that
perform intra-RAT
measurements for
fast ANR. After the
number of UEs
performing intra-
LOFD-002001 /
RAT measurements NO NO NO
TDLOFD-002001
for fast ANR
reaches the
maximum number,
intra-RAT
measurements for
fast ANR will not be
performed on other
UEs.
Indicates the
maximum allowed
number of UEs that
perform inter-RAT
measurements for
fast ANR. After the
number of UEs
performing inter-
LOFD-002002 /
RAT measurements NO NO NO
TDLOFD-002002
for fast ANR
reaches the
maximum number,
inter-RAT
measurements for
fast ANR will not be
performed on other
UEs.

Indicates the
threshold above
which the eNodeB
enters the
monitoring state for
intra-RAT fast ANR. LOFD-002001 /
NO NO NO
The threshold is TDLOFD-002001
expressed as the
number of UEs that
have performed
measurements for
intra-RAT fast ANR.

Indicates the
threshold above
which the eNodeB
enters the
monitoring state for
inter-RAT fast ANR. LOFD-002002 /
NO NO NO
The threshold is TDLOFD-002002
expressed as the
number of UEs that
have performed
measurements for
inter-RAT fast ANR.
relationships. If this
parameter is set to
FREE(FREE), the
eNodeB
automatically
optimizes neighbor
relationships using
ANR.
If this parameter is
set to
CONTROLLED(CO
NTROLLED), the
eNodeB reports the
neighbor
relationships to be
optimized to the
U2000 and the
optimization is LOFD-002001 /
subject to manual TDLOFD-002001
NO NO NO
confirmation. LOFD-002002 /
Options TDLOFD-002002
EutranCtrlOptMode,
UtranCtrlOptMode,
and
GeranCtrlOptMode
of the
OptModeStrategy
parameter controls
whether to report
neighbor
relationships with E-
UTRAN cells,
UTRAN cells, and
GERAN cells,
respectively. No
options are
designed to control
whether to report
the neighboring cell
when the number of
neighbor
relationships in the
NRT has reached
the maximum and a
new neighbor
relationship needs
to be added to the
NRT by ANR.
This parameter is
also used for the
determination of
external cell
removal from a
neighboring cell list
(NCL). Within four
LOFD-002001 /
consecutive
TDLOFD-002001
measurement NO NO NO
LOFD-002002 /
periods, if the
TDLOFD-002002
neighbor
relationship
corresponding to an
external cell is not
added to the NRT,
and the local
eNodeB is not
configured with an
X2 interface with
the peer eNodeB
that serves this
external cell, this
external cell is
removed from the
NCL.
This parameter is
also used for the
whether to
periodically remove
redundant neighbor
relationships from
the NRT.
Consider that the
number of neighbor
relationships in the
NRT has reached
its maximum, and a
new neighbor
relationship needs
to be added by
ANR. If the total
number of
handovers (of all
types) from the
local cell to all LOFD-002001 /
neighboring cells in TDLOFD-002001
NO NO NO
the last LOFD-002002 /
measurement TDLOFD-002002
period specified by
the
StatisticPeriodForN
RTDel parameter
reaches this
parameter value,
the eNodeB
removes a neighbor
relationship from
the NRT.
In periodic
redundant neighbor
relationship
removal, the
eNodeB removes
redundant neighbor
relationships if the
Indicates the switch
used to enable or
disable proactive
PCI conflict
detection. Within a
specified duration
after this switch is
turned on, the
eNodeB delivers
measurement
configurations for LOFD-002007 /
NO NO NO
proactive PCI TDLOFD-002007
conflict detection to
UEs that meet
specific
requirements. Then,
the eNodeB starts
the detection based
on the
measurement
reports from the
UEs.

Indicates the start

time of the active
PCI conflict
detection. If the
stop time is earlier LOFD-002007 /
NO NO NO
than or the same as TDLOFD-002007
the start time, the
stop time is
assumed to be the
time of the next day.
Indicates the stop
time of the active
PCI conflict
detection. If the
stop time is earlier LOFD-002007 /
NO NO NO
than or the same as TDLOFD-002007
the start time, the
stop time is
assumed to be the
time of the next day.

Indicates the
received signal
code power (RSCP)
threshold for fast
ANR with UTRAN.
If the signal quality
in a neighboring
LOFD-002002 /
UTRAN cell NO NO NO
TDLOFD-002002
reported by the UE
is lower than the
threshold, the cell is
not automatically
added as an
external cell of the
eNodeB.

Indicates the
received signal
strength indicator
(RSSI) threshold for
fast ANR with
GERAN. If the
signal quality in a
neighboring LOFD-002002 /
NO NO NO
GERAN cell TDLOFD-002002
reported by the UE
is lower than the
threshold, the cell is
not automatically
added as an
external cell of the
eNodeB.
Indicates the pilot
strength threshold
for fast ANR with
CDMA2000 1xRTT.
If the signal quality
in a neighboring
CDMA2000 1xRTT LOFD-002002 /
NO NO NO
cell reported by the TDLOFD-002002
UE is lower than
the threshold, the
cell is not
automatically added
as an external cell
of the eNodeB.

Indicates the pilot

strength threshold
for fast ANR with
CDMA2000 HRPD.
If the signal quality
in a neighboring
CDMA2000 HRPD LOFD-002002 /
NO NO NO
cell reported by the TDLOFD-002002
UE is lower than
the threshold, the
cell is not
automatically added
as an external cell
of the eNodeB.
threshold based on
which intra-RAT
ANR automatically
sets the NoHoFlag
of a neighboring
cell to
FORBID_HO_ENU
M(Forbid Ho) when
the handover
success rate is
equal to or less
than the
NoHoSetThd
parameter value.
The threshold is the
percentage of the
number of
successful
handovers to the LOFD-002001 /
NO NO NO
total number of TDLOFD-002001
handovers from the
local cell to the
neighboring cell. If
the handover
success rate is
equal to or less
than the threshold
within a
measurement
period specified by
the StatisticPeriod
parameter, intra-
RAT ANR
automatically sets
the NoHoFlag of
the neighboring cell
to
FORBID_HO_ENU
neighbor
relationship from an
E-UTRAN NRT.
When the NRT
reaches its capacity
and ANR needs to
add a new neighbor
relationship to the
NRT, ANR removes
an old neighbor
relationship with a
cell from the NRT if
the number of
handovers to this
cell is less than the
threshold.
If this parameter is
set to 0, ANR
LOFD-002001 /
removes the NO NO NO
TDLOFD-002001
neighbor
relationship with a
cell from an NRT
not based on the
number of
handovers to this
cell but based on
the number of
measurement
reports on this cell.
If this parameter is
set to another
value, ANR can
remove the
neighbor
relationship with a
cell from an NRT if
the number of
set to
NCL_MODE(NCL
Mode), fast ANR
only adds a
detected cell that
meets certain
conditions to an
NCL.
If this parameter is
set to
NCL_NRT_MODE(
NCL and NRT
Mode), fast ANR
adds a detected cell
that meets certain
conditions to an
NCL and then adds LOFD-002001 /
the neighboring TDLOFD-002001
relationship with the NO NO NO LOFD-
detected cell that is 002002/TDLOFD-
in the NCL to the 002002
NRT of the source
cell.
If this parameter is
set to
NRT_MODE(NRT_
MODE), fast ANR
adds a detected cell
that meets certain
conditions and with
which the neighbor
relationship is not in
an NRT of the
source cell to an
NCL and adds the
neighbor
relationship with the
Indicates the policy
based on which
intra-RAT event-
triggered ANR adds
a neighbor
relationship to an
NRT.
If this parameter is
set to
BASED_NCL, intra-
RAT event-triggered
ANR can add a
neighbor
LOFD-002001 /
relationship to an NO NO NO
TDLOFD-002001
NRT based on the
NCL.
If this parameter is
set to
NOT_BASED_NCL,
intra-RAT event-
triggered ANR adds
a neighbor
relationship to an
NRT based on the
CGI reported from
the UE but not
based on the NCL.
UEs to perform cell
global identification
(CGI) reading for
ANR except event-
triggered ANR
based on CA
measurements. If
this parameter is
set to
CA_UE_CAP(CA
UE Capability), the
eNodeB does not
select the CA UEs
that support the CA
bands in the CA
band combinations
supported by the
eNodeB.
LOFD-002001 /
If this parameter is NO NO NO
TDLOFD-002001
set to
CA_UE_CARRIER_
NUM(CA UE Carrier
Number), the
eNodeB does not
select the CA UEs
that are each
served by more
than one carrier.
If this parameter is
set to
ANR_UE_CAP(AN
R UE Capability),
the eNodeB does
not select the UEs
that do not support
ANR, that is, the
eNodeB does not
to a newly detected
neighboring cell,
with which the
neighbor
relationship is to be
processed by the
OSS. When the LOFD-001022 /
OptMode TDLOFD-001022
parameter in the LOFD-001023 /
ANR MO is set to TDLOFD-001023
CONTROLLED, the LOFD-001033 /
eNodeB reports the TDLOFD-001033
newly detected LOFD-001034 /
neighboring cell to TDLOFD-001034
the OSS for manual LOFD-001035 /
process. If this TDLOFD-001035
parameter is set to LOFD-001019 /
PERMIT_HO, the TDLOFD-001019
eNodeB can initiate LOFD-001020 /
NO NO NO
handovers to the TDLOFD-001020
newly detected LOFD-001021 /
neighboring cell TDLOFD-001021
before the LOFD-001032 /
corresponding TDLOFD-001032
neighbor LOFD-001044 /
relationship is TDLOFD-001044
manually LOFD-001045 /
processed. If this TDLOFD-001045
parameter is set to LOFD-002001 /
FORBID_HO, the TDLOFD-002001
eNodeB cannot LOFD-002002 /
initiate handovers TDLOFD-002002
to the newly
detected
neighboring cell
before the
corresponding
neighbor
Indicates whether
smart preallocation
takes effect during
ANR-triggered cell
global identification
(CGI) reading.
Consider that
SmartPreAllocation
Switch of the
UlSchSwitch
parameter is on.
LOFD-002001 /
Setting this NO NO NO
TDLOFD-002001
parameter to
DISABLE indicates
that smart
preallocation does
not take effect.
Setting this
parameter to
ENABLE indicates
that smart
preallocation takes
effect.
FORBID_HO_ENU
M for an intra-RAT
neighboring cell if
the neighboring cell
meets the
requirements on the
number of
handover attempts
from the local cell to
the neighboring cell
and the handover
success rate within
a specified
measurement
period. When this
parameter is set to
NO_CHECK, the
eNodeB directly
sets the No LOFD-002001 /
NO NO NO
handover indicator TDLOFD-002001
parameter to
FORBID_HO_ENU
M for this
neighboring cell.
When this
parameter is set to
PCI_CHECK, the
eNodeB first
instructs the UE to
read the CGI of the
neighboring cell
with the aim to
detect unknown
neighboring cells
with the same PCI
and then
determines whether
to set the No
Indicates the policy
based on which
inter-RAT event-
triggered ANR with
UTRAN adds a
neighbor
relationship to an
NRT.
If this parameter is
set to
BASED_NCL(BASE
D_NCL), this type
of ANR adds
LOFD-002002 /
neighbor NO NO NO
TDLOFD-002002
relationships to
NRTs based on
NCLs.
If this parameter is
set to
NOT_BASED_NCL(
NOT_BASED_NCL)
, this type of ANR
adds neighbor
relationships to
NRTs based on
CGIs reported by
UEs.
Indicates the policy
based on which
inter-RAT event-
triggered ANR with
GERAN adds a
neighbor
relationship to an
NRT.
If this parameter is
set to
BASED_NCL(BASE
D_NCL), this type
of ANR adds
LOFD-002002 /
neighbor NO NO NO
TDLOFD-002002
relationships to
NRTs based on
NCLs.
If this parameter is
set to
NOT_BASED_NCL(
NOT_BASED_NCL)
, this type of ANR
adds neighbor
relationships to
NRTs based on
CGIs reported by
UEs.
performing VoLTE
services to perform
ANR-related
measurements.
This parameter
includes the
following options:
UTRAN_EVENT_A
NR_WITH_VOIP_M
ODE: An eNodeB
can select UEs with
bearers with a QCI
of 1 to perform
measurements for
event-triggered
ANR with UTRAN
only if this option is
selected.
LOFD-
GERAN_EVENT_A
NO NO NO 002002/TDLOFD-
NR_WITH_VOIP_M
002002
ODE: An eNodeB
can select UEs with
bearers with a QCI
of 1 to perform
measurements for
event-triggered
ANR with GERAN
only if this option is
selected.
CDMA_EVENT_AN
R_WITH_VOIP_MO
DE: An eNodeB can
select UEs with
bearers with a QCI
of 1 to perform
measurements for
event-triggered
ANR with
Indicates the length
of the timer of CGI LOFD-
reading for event- NO NO NO 002002/TDLOFD-
triggered ANR with 002002
UTRAN.

Indicates the length

of the timer of CGI LOFD-
reading for event- NO NO NO 002002/TDLOFD-
triggered ANR with 002002
GERAN.
and removes the
GERAN cells from
the specific NCL
and NRT.
EUTRAN_DELCEL
LERRORNCELL: If
this switch is on,
the eNodeB
periodically
determines
inappropriate
neighboring E-
UTRAN cells to
which the success
rate of handovers
from a local cell is
less than the
LOFD-002001 /
specified threshold,
TDLOFD-002001
and removes the E- NO NO NO
LOFD-002002 /
UTRAN cells from
TDLOFD-002002
the specific NCL
and NRT.
When event-
triggered ANR and
automatic neighbor
relationship removal
for the specific RAT
are enabled, the
following automatic
removal mechanism
takes effect without
switch control: The
eNodeB periodically
determines
inappropriate
neighboring E-
UTRAN cells to
optimized to the
U2000, and the
optimization is
subject to manual
confirmation on the
U2000. If this option
is deselected, the
eNodeB
automatically
processes the
neighbor
relationships with E-
UTRAN cells to the
U2000.
UtranCtrlOptMode:
Indicates whether
to report neighbor
LOFD-002001 /
relationships with
TDLOFD-002001
UTRAN cells. If this NO NO NO
LOFD-002002 /
option is selected,
TDLOFD-002002
the eNodeB reports
neighbor
relationships with
UTRAN cells to be
optimized to the
U2000, and the
optimization is
subject to manual
confirmation on the
U2000. If this option
is deselected, the
eNodeB
automatically
processes the
neighbor
relationships with
UTRAN cells.
neighbor
relationship from a
UTRAN NRT. When
the NRT reaches its
capacity and ANR
needs to add a new
neighbor
relationship to the
NRT, ANR removes
an old neighbor
relationship with a
cell from the NRT if
the number of
handovers to this
cell is less than the
threshold.
If this parameter is
set to 0, ANR
LOFD-002002 /
removes the NO NO NO
TDLOFD-002002
neighbor
relationship with a
cell from an NRT
not based on the
number of
handovers to this
cell but based on
the number of
measurement
reports on this cell.
If this parameter is
set to another
value, ANR can
remove the
neighbor
relationship with a
cell from an NRT if
the number of
neighbor
relationship from a
GERAN NRT. When
the NRT reaches its
capacity and ANR
needs to add a new
neighbor
relationship to the
NRT, ANR removes
an old neighbor
relationship with a
cell from the NRT if
the number of
handovers to this
cell is less than the
threshold.
If this parameter is
set to 0, ANR
LOFD-002002 /
removes the NO NO NO
TDLOFD-002002
neighbor
relationship with a
cell from an NRT
not based on the
number of
handovers to this
cell but based on
the number of
measurement
reports on this cell.
If this parameter is
set to another
value, ANR can
remove the
neighbor
relationship with a
cell from an NRT if
the number of
Indicates the
penalty statistics
period during which
a deleted neighbor
relationship with an
E-UTRAN or
UTRAN cell can be
added to the
neighboring relation
LOFD-002001 /
table (NRT) again if
TDLOFD-002001
the number of times NO NO NO
LOFD-002002 /
neighboring E-
TDLOFD-002002
UTRAN or UTRAN
cell addition is
triggered is greater
than or equal to the
value of the
EutranNcellDelPun
Num or
UtranNcellDelPunN
um parameter.
Indicates the
number of times
penalty statistics
about neighboring
E-UTRAN cell
deletion are
collected. When a
neighbor
relationship with an
E-UTRAN cell is LOFD-002001 /
NO NO NO
deleted, it can be TDLOFD-002001
added to the NRT
again if the number
of times
neighboring E-
UTRAN cell
addition is triggered
is greater than or
equal to the value
of this parameter.
Indicates the
number of times
penalty statistics
about neighboring
UTRAN cell
deletion are
collected. When a
neighbor
relationship with a
UTRAN cell is LOFD-002002 /
NO NO NO
deleted, it can be TDLOFD-002002
added to the NRT
again if the number
of times
neighboring UTRAN
cell addition is
triggered is greater
than or equal to the
value of this
parameter.
Indicates the
handover success
rate threshold for
reading the CGI of
a neighboring cell.
If the handover
success rate from
the local cell to a
neighboring cell is LOFD-002001 /
NO NO NO
less than or equal TDLOFD-002001
to this parameter
value, the function
of automatically
setting the no HO
attribute instructs
UEs to read the
CGI of the
neighboring cell.
optimization on
neighboring
measurement
priorities. The
neighboring
measurement
priorities are
LOFD-
arranged based on
002002/TDLOFD-
the number of times
002002
that each
LOFD-
neighboring cell is
001022/TDLOFD-
measured within
001022
the optimization
LOFD-
period. Suggestions
001033/TDLOFD-
on neighboring cell
001033
measurement
LOFD-
priority arrangement
001052/TDLOFD-
are exported after
001052
the optimization NO NO NO
LOFD-
period. The period
001053/TDLOFD-
is one week by
001053
default.
LOFD-
Neighboring cell
001019/TDLOFD-
selection in
001019
handovers cannot
LOFD-
be performed
001043/TDLOFD-
based on the
001043
arranged
LOFD-
neighboring cell
001072/TDLOFD-
measurement
001072
priorities within the
time after the
optimization period
ends but before the
arranged
neighboring cell
measurement
specified
measurement
period is measured
within this period.
The measurement
period is used to
evaluate neighbor
cell classification
results.
Within a specified
measurement
period, if the
number of
handovers from the
source cell to a
neighboring cell
reaches the
HoAttemptThd
LOFD-
parameter value or
NO NO NO 081225/TDLOFD-
the number of times
081225
that a neighboring
cell is configured as
an SCell for a CA
UE reaches the
CaSCellCfgThd
parameter value,
the
NCellClassLabel
parameter value of
the neighboring cell
is changed from
EXTENDED(EXTE
NDED) to
FORMAL(FORMAL
). Within four
consecutive
specified
measurement
Indicates the
handover number
threshold for
neighboring cell
classification
management.
Within a specified
measurement
period, if the
number of
handovers from the
source cell to a
neighboring cell
LOFD-
reaches this
NO NO NO 081225/TDLOFD-
threshold, the
081225
neighboring cell is
labeled as
FORMAL. Within
four consecutive
specified
measurement
periods, if the
number cannot
reach this
threshold, the
neighboring cell is
labeled as
EXTENDED.
Indicates the
threshold of times
that a target
neighboring cell is
successfully
configured as an
SCell for a CA UE
in neighboring cell
classification
management. If the
number of times
that a target
neighboring cell is
successfully
configured as an
LOFD-
SCell for a CA UE
NO NO NO 081225/TDLOFD-
reaches this
081225
threshold within a
specified
measurement
period, the
neighboring cell is
labeled as
FORMAL. If the
number cannot
reach this threshold
within a specified
measurement
period, the
neighboring cell is
labeled as
EXTENDED.

Indicates the device

number of the BF
antenna, it uniquely YES YES NO None
identifies a RET
within an eNodeB.
Indicates the
manufacturer of the NO NO NO None
BF antenna.

Indicates the
cabinet number of
LOFD-001024 /
the RRU NO NO NO
TDLOFD-001024
connecting to the
BF antenna.
Indicates the
subrack number of
LOFD-001024 /
the RRU NO YES NO
TDLOFD-001024
connecting to the
BF antenna.

Indicates the slot

number of the RRU LOFD-001024 /
NO NO NO
connecting to the TDLOFD-001024
BF antenna.

Indicates the model

of the BF antenna.
Set this parameter
to RAE if the
LOFD-001024 /
antenna weight NO NO NO
TDLOFD-001024
must be queried
based on the RAE.
RAE is case-
insensitive.

Indicates the
configured tilt of the NO NO NO None
BF antenna.

Indicates the
beamwidth formed NO NO NO None
after beamforming.
Indicates the
frequency band in
NO NO NO None
which the BF
antenna operates.

Indicates the type

NO NO NO None
of the BF antenna.

Indicates the
degrees that an
intelligent antenna
deflects the beam
in the horizontal
azimuth from the
mechanical azimuth
based on the
weight. (The
NO NO NO None
mechanical azimuth
of the antenna is
used as a normal,
clockwise deflection
is a positive
number, and
counterclockwise
deflection is a
negative number.)

Indicates the
polarization mode NO NO YES None
of the BF antenna.

Indicates the
beamwidth of the NO NO YES None
antenna element.

Indicates the
number of physical
antenna ports to
NO NO YES None
which the BF
antenna is
connected.

Indicates the
amplitude offset at
physical antenna
port 1 when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
two ports. Each port
may consist of
multiple physical
antenna ports.
Indicates the phase
offset at physical
antenna port 1
when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
two ports. Each port
may consist of
multiple physical
antenna ports.

Indicates the
amplitude offset at
physical antenna
port 2 when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
two ports. Each port
may consist of
multiple physical
antenna ports.

Indicates the phase

offset at physical
antenna port 2
when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
two ports. Each port
may consist of
multiple physical
antenna ports.

Indicates the
amplitude offset at
physical antenna
port 3 when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
two ports. Each port
may consist of
multiple physical
antenna ports.
Indicates the phase
offset at physical
antenna port 3
when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
two ports. Each port
may consist of
multiple physical
antenna ports.

Indicates the
amplitude offset at
physical antenna
port 4 when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
two ports. Each port
may consist of
multiple physical
antenna ports.

Indicates the phase

offset at physical
antenna port 4
when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
two ports. Each port
may consist of
multiple physical
antenna ports.

Indicates the
amplitude offset at
physical antenna
port 1 when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
four ports. Each
port may consist of
multiple physical
antenna ports.
Indicates the phase
offset at physical
antenna port 1
when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
four ports. Each
port may consist of
multiple physical
antenna ports.

Indicates the
amplitude offset at
physical antenna
port 2 when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
four ports. Each
port may consist of
multiple physical
antenna ports.

Indicates the phase

offset at physical
antenna port 2
when the BF
antenna is used
and cell-specific
NO NO YES None
reference signals
are transmitted from
four ports. Each
port may consist of
multiple physical
antenna ports.

Indicates the ID of
the file transfer NO NO YES None
session.
Indicates the
statistic period for
blind neighboring
cell optimization.
Information about
CSFB-triggered
measurement-
based handovers or
CSFB-triggered
blind handovers is LOFD-002002 /
NO NO NO
collected within the TDLOFD-002002
statistic period, and
suggestions on
blind neighboring
cell optimization are
exported after the
statistic period. The
statistic period is
seven days by
default.

of neighboring cells
for blind handovers,
if the number of
CSFB-triggered
measurement-
based handover
attempts from the
E-UTRAN cell to
neighboring cells
working at a
frequency (or
frequency group)
within a
measurement
period is greater
than this parameter
value, neighboring
cells working at the
LOFD-002002 /
frequency (or NO NO NO
TDLOFD-002002
frequency group)
can be selected as
candidate cells in
blind handovers. In
blind neighboring
cell optimization, if
the number of
CSFB-triggered
blind handover
attempts from the
E-UTRAN cell to a
neighboring cell
that has been
selected as a
candidate cell in
blind handovers
within a
measurement
Indicates the
handover success
rate threshold for
determining
whether a
neighboring cell can
be selected as a
candidate cell in
blind handovers. If
the success rate of
measurement-
based handovers
LOFD-002002 /
for a UE from the E- NO NO NO
TDLOFD-002002
UTRAN cell to a
neighboring cell is
greater than or
equal to this
parameter value
within a
measurement
period, the
neighboring cell can
be selected as a
candidate cell in
blind handovers.
Indicates the
CSFB-triggered
measurement-
based handover
attempt threshold
for determining
whether a
neighboring cell can
be selected as a
candidate cell in
blind handovers. In
a measurement
period, the ratio of
the CSFB-triggered
measurement-
based handover
attempts from the
E-UTRAN cell to a
LOFD-002002 /
neighboring cell to NO NO NO
TDLOFD-002002
all CSFB-triggered
measurement-
based handover
attempts from the
E-UTRAN cell to all
neighboring cells
working on the
corresponding
frequency (or
frequency group) is
measured. If the
ratio is greater than
or equal to this
threshold, the
neighboring cell can
be selected as a
candidate cell in
blind handovers.
Indicates the blind
handover success
rate threshold for
determining
whether a
neighboring cell
selected as a
candidate cell in
blind handovers
can remain as a
candidate cell in
blind handovers. If
the blind handover
success rate of
handing over a UE
LOFD-002002 /
from the E-UTRAN NO NO NO
TDLOFD-002002
cell to the
neighboring cell
that has been
selected as a
candidate cell in
blind handovers is
less than or equal
to this parameter
value within a
measurement
period, the
neighboring cell
cannot remain as a
candidate cell in
blind handovers.
Indicates the mode
for optimizing
neighboring cells
for blind handovers.
If this parameter is
set to FREE, the
eNodeB
automatically
changes the
priorities of
neighboring cells in
blind handovers. If
this parameter is
set to
LOFD-002002 /
CONTROLLED, the NO NO NO
TDLOFD-002002
eNodeB only
reports the
configuration of and
optimization on
neighboring cells
for blind handovers
to the U2000, and
the U2000 delivers
the configuration of
and optimization on
the neighboring cell
after users confirm
the configuration
and optimization.

Indicates a
differentiated
services code point
(DSCP) for IP
LOFD-
packets. Different
YES YES NO 081202/LOFD-
types of traffic can
081203
be assigned
different DSCPs
within the range of
1 to 63.

LOFD-
Indicates a service
NO NO NO 081202/LOFD-
description.
081203
Indicates whether
to provide rates in
two phases for QoS
purposes. This
switch is required
only for video, not
for other services. If
this switch is turned
on for video, the
eNodeB provides LOFD-
an initial NO NO NO 081202/LOFD-
acceleration in the 081203
first phase and a
normal rate
guarantee in the
second phase. If
this switch is turned
off, the eNodeB
provides a normal
rate guarantee from
the start.

Indicates the QoS

in the first phase if
the QoS Policy
Time Switch is LOFD-
turned on for video, NO YES NO 081202/LOFD-
or the QoS across 081203
the entire process if
this switch is turned
off.
Indicates the time
length of the first
phase in which the LOFD-
eNodeB provides NO NO NO 081202/LOFD-
an initial 081203
acceleration for
video.

Indicates the QoS

in the second LOFD-
phase after the NO NO NO 081202/LOFD-
initial acceleration 081203
for video.
Indicates the value
N in the P/N rule for
QoE-based
handover decision.
If the throughput is
unsatisfactory for P MRFD-101401 /
NO NO NO
consecutive times MRFD-101401
during the
measurement
period N, QoE-
based handover is
triggered.

Indicates the value

P in the P/N rule for
QoE-based
handover decision.
If the throughput is
unsatisfactory for P
NO NO NO MRFD-101401
consecutive times
during the
measurement
period N, QoE-
based handover is
triggered.

Indicates the ID of a LOFD-

user-defined QoS YES YES NO 081202/LOFD-
policy. 081203
Indicates a traffic
type for service
differentiation.
LOFD-
Currently, there are
NO NO NO 081202/LOFD-
three types of
081203
traffic: VIDEO,
DOWNLOAD, and
OTHER.

Indicates the ID of a
prioritized queue.
The eNodeB can
provide
differentiated
services for a
LOFD-
maximum of eight
NO NO NO 081202/LOFD-
prioritized queues.
081203
Multiple DSCPs can
be mapped to one
queue, but one
DSCP cannot be
mapped to multiple
queues.
Indicates a
guaranteed bit rate
LOFD-
for downlink
NO NO NO 081202/LOFD-
services. The value
081203
0 indicates an
invalid rate.

Indicates the
maximum bit rate of
downlink services.
This parameter
must be set to a
value greater than 0
if the TrafficType
LOFD-
parameter value is
NO NO NO 081202/LOFD-
DOWNLOAD. This
081203
parameter does not
need to be set and
the default value 0
takes effect if the
TrafficType
parameter value is
VIDEO or OTHER.

LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
Indicates the TDLAOFD-001002
identity of the CA LAOFD-00100202 /
group. It uniquely TDLAOFD-
YES YES NO
identifies a CA 00100102
group within an LAOFD-070201 /
eNodeB. TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111
 LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-001002
LAOFD-00100202 /
TDLAOFD-
Indicates the type
NO NO NO 00100102
of the CA group.
LAOFD-070201 /
TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111
LAOFD-081236

Indicates the local

cell ID of a primary
cell. It uniquely YES YES NO None
identifies a cell
within an eNodeB.

Indicates the local

cell ID of a split cell.
It uniquely identifies YES YES NO None
a cell within an
eNodeB.
 LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
Indicates the TDLAOFD-001002
identity of the CA LAOFD-00100202 /
group. It uniquely TDLAOFD-
YES YES NO
identifies a CA 00100102
group within an LAOFD-070201 /
eNodeB. TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111

Indicates the local

cell ID. It uniquely
YES YES NO None
identifies a cell
within an eNodeB.

LAOFD-00100101
LAOFD-00100102
LAOFD-00100201 /
TDLAOFD-001002
LAOFD-00100202 /
Indicates the ID of
TDLAOFD-
the eNodeB serving YES YES NO
00100102
the cell.
LAOFD-070201 /
TDLAOFD-070201
LAOFD-070202
TDLAOFD-
00100111
Indicates the
priority of the cell
being treated as a
primary serving cell
(PCell). A larger
parameter value LAOFD-00100101
represents a higher LAOFD-00100102
priority level. This LAOFD-00100201 /
parameter is valid TDLAOFD-001002
only if the LAOFD-00100202 /
IdleModePccAncho TDLAOFD-
NO NO NO
rSwitch(IdleModePc 00100102
cAnchorSwitch), LAOFD-070201 /
PccAnchorSwitch(P TDLAOFD-070201
ccAnchorSwitch), or LAOFD-070202
EnhancedPccAnch TDLAOFD-
orSwitch(Enhanced 00100111
PccAnchorSwitch)
option of the
CaAlgoSwitch
parameter is
selected.

Indicates the LAOFD-00100101

reference signal LAOFD-00100102
received power LAOFD-00100201 /
(RSRP) threshold TDLAOFD-001002
for triggering event LAOFD-00100202 /
A4 during higher- TDLAOFD-
NO NO NO
priority cell 00100102
evaluation for PCell LAOFD-070201 /
selection in TDLAOFD-070201
scenarios where CA LAOFD-070202
is configured based TDLAOFD-
on CA groups. 00100111
Indicates the
reference signal
received quality
(RSRQ) threshold
for triggering event LAOFD-00100101
A4 during higher- LAOFD-00100102
priority cell LAOFD-00100201 /
evaluation for PCell TDLAOFD-001002
selection in LAOFD-00100202 /
scenarios where CA TDLAOFD-
NO NO NO
is configured based 00100102
on CA groups. If the LAOFD-070201 /
measured RSRQ of TDLAOFD-070201
an inter-frequency LAOFD-070202
neighboring cell in TDLAOFD-
the CA group is 00100111
greater than this
parameter value,
the CA UE reports
event A4.

Indicates whether
the license "Carrier
Aggregation for
Downlink
3CC(TDD)" is used NO NO YES None
by the cell specified
by the eNodeB ID
and Local Cell ID
parameters.

Indicates whether
the license "Flexible
CA from Multiple
Carriers(TDD)" is
used by the cell NO NO YES None
specified by the
eNodeB ID and
Local Cell ID
parameters.

Indicates whether
the license "Carrier
Aggregation for
Downlink
4CC(TDD)" is used NO NO YES None
by the cell specified
by the eNodeB ID
and Local Cell ID
parameters.
Indicates whether
the license "Carrier
Aggregation for
Uplink 2CC(TDD)"
is used by the cell NO NO YES None
specified by the
eNodeB ID and
Local Cell ID
parameters.

Indicates whether
the license
"FDD+TDD Carrier
Aggregation(LTE
TDD)" is used by NO NO YES None
the cell specified by
the eNodeB ID and
Local Cell ID
parameters.

Indicates whether
the license
"FDD+TDD Carrier
Aggregation(LTE
FDD)" is used by NO NO YES None
the cell specified by
the eNodeB ID and
Local Cell ID
parameters.

Indicates whether
the license
"Downlink Carrier
Aggregation(TDD)"
is used by the cell
specified by the
NO NO YES None
eNodeB ID and
Local Cell ID
parameters. This
parameter applies
only to LTE TDD
cells.
Indicates the switch
for the algorithm for
periodically
updating cell IDs. If
this parameter is
set to
BOOLEAN_TRUE,
cell IDs are
periodically LBFD-002009 /
NO NO NO
updated, inserted TDLBFD-002009
into the system
information, and
broadcast to the
associated UEs
once the time at
which the algorithm
begins to take
effect is reached.

Indicates the time

at which the
algorithm for
periodically
updating cell IDs
begins to take
effect. If the switch
for the algorithm is
turned on, cell IDs
LBFD-002009 /
are periodically NO NO NO
TDLBFD-002009
updated, inserted
into the system
information, and
broadcast to the
associated UEs
once the time
specified by this
parameter is
reached.

Indicates the period LBFD-002009 /

NO NO NO
of updating cell IDs. TDLBFD-002009

Indicates whether
to enable CSPC in
cells under the
centralized control LOFD-070208
NO NO NO
node in Cloud BB TDLOFD-080203
scenarios.This
switch applies only
to LTE FDD.
Indicates the
measurement mode
of the reference
signal received
power (RSRP) used
in CSPC. The
uplink RSRP is
LOFD-070208
measured based on NO NO NO
TDLOFD-080203
the uplink sounding
reference signal
(SRS)
measurement. This
parameter applies
only to LTE FDD
cells.

Indicates the mode

of grouping cells
into clusters for
CSPC. If this
parameter is set to
STATIC_CONFIG,
cells must be
manually grouped
into clusters for
CSPC based on
site scenarios. If
this parameter is
LOFD-070208
set to NO NO NO
TDLOFD-080203
DYNAMIC_PARTITI
ON_CONFIG, the
centralized control
node periodically
groups cells into
clusters for CSPC
based on site
scenarios. The
DYNAMIC_PARTITI
ON_CONFIG value
does not take effect
currently.

Indicates the
interval at which
cells are grouped
into clusters for
CSPC. The interval
can be configured
based on site
scenarios. This LOFD-070208
NO NO NO
parameter currently TDLOFD-080203
does not take effect
because dynamic
clustering is not
supported. This
parameter applies
only to LTE FDD
cells.
Indicates whether
the centralized
control node
performs power
calculation for
power optimization.
If this parameter is
set to ON, the
centralized control
node performs
power calculation
based on
LOFD-070208
measurement NO NO NO
TDLOFD-080203
information
received from
eNodeBs. If this
parameter is set to
OFF, the centralized
control node does
not perform power
calculation after
receiving
measurement
information from
eNodeBs.

Indicates the
percentage of full-
NO NO NO LOFD-070208
power subframes
within one second.
Indicates the
interval between
the time that an
eNodeB reports
measurement
information to the
centralized control LOFD-070208
NO NO NO
node and the time TDLOFD-080203
that the power
configuration
delivered by the
centralized control
node takes effect
on the eNodeB.

Indicates the
maximum number LOFD-070208
NO NO NO
of UEs that can be TDLOFD-080203
selected for CSPC.
Indicates the
physical resource
block (PRB) usage
threshold for
enabling
coordinated
scheduling-based
power control
(CSPC). CSPC is
enabled when the
highest PRB usage
among all cells in a
CSPC cluster is
greater than this NO NO NO LOFD-070208
parameter value. To
prevent CSPC from
being enabled and
disabled frequently
in the cluster, the
PRB usage
threshold for
disabling CSPC is
lower than this
parameter value.
This parameter
applies only to LTE
FDD.

Indicates whether
to enable CSPC in
cells under the
centralized control
node in Cloud BB NO NO NO TDLOFD-080203
scenarios.This
parameter applies
only to LTE TDD
cells.
Indicates the
acceptable capacity
loss proportion in a
network with CSPC
enabled. This
parameter affects
the gain for cell
edge UEs. Set this
parameter in
heavily-loaded
networks to adjust
cell downlink
throughput and the
downlink
throughput gain of
cell edge UEs. If
this parameter is
set to 100, network
capacity loss is not
NO NO NO LOFD-070208
considered, and the
downlink
throughput gain of
cell edge UEs
reaches the
maximum. If this
parameter is set to
0, it is preferential
to guarantee that
capacity loss does
not occur in heavily-
loaded networks.
However, the
downlink
throughput gain of
cell edge UEs
decreases. This
parameter applies
only to LTE FDD.

Indicates the index

of the server which
allows UEs who
gain access to then YES YES NO None
be determined as
UEs running
unlimited services.
Indicates the IP
address of the
server which allows
UEs who gain
access to then be
determined as UEs
running unlimited
services. Server-IP-
address-based
unlimited-service-
supported UE
identification can be NO YES NO None
performed based
on any of the
following method:
(1) Server IP
address; (2) Server
IP address + server
protocol type; (3)
Server IP address +
server protocol type
+ server port
number.

Indicates whether
to check the port
number of the
server which allows
UEs who gain
access to then be
determined as UEs
running unlimited
NO NO NO None
services. The value
0 indicates that the
port number of the
server that a UE
running unlimited
services accesses
does not need to be
checked.
Indicates whether
to check the
protocol type of the
server which allows
UEs who gain
access to then be
determined as UEs
running unlimited
services. If this
parameter is set to
None, the eNodeB
does not check the
protocol type of
downlink packets. If NO NO NO None
this parameter is
set to UDP, the
eNodeB checks
whether the
protocol type of
downlink packets is
UDP. If this
parameter is set to
TCP, the eNodeB
checks whether the
protocol type of
downlink packets is
TCP.

Indicates the
downlink (DL) E-
UTRA absolute
radio frequency
channel number LOFD-081207 /
YES YES NO
(EARFCN) of the E- TDLOFD-081207
UTRAN cell with a
specific physical
cell identifiers
(PCIs).

Indicates the start

physical cell
LOFD-081207 /
identifier (PCI) of E- YES YES NO
TDLOFD-081207
UTRAN cells with
specific PCIs.
Indicates the
number of specific
LOFD-081207 /
physical cell NO NO NO
TDLOFD-081207
identifiers (PCIs) of
E-UTRAN cells.

TDLBFD-00201802
option is selected,
LBFD-00201804 /
service-based inter-
TDLBFD-00201804
frequency
LBFD-00201805 /
handovers are
TDLBFD-00201805
enabled and UEs
LOFD-001033 /
using a specific
TDLOFD-001033
type of services can
LOFD-001034 /
be handed over to
TDLOFD-001034
inter-frequency
LOFD-001035 /
cells. If this option
TDLOFD-001035
is deselected,
LOFD-001052 /
service-based inter-
TDLOFD-001052
frequency
LOFD-001053 /
handovers are
TDLOFD-001053
disabled.
LOFD-001088 /
UlQualityInterFreqH
TDLOFD-001088
oSwitch: If this
LOFD-001089 /
option is selected,
TDLOFD-001089
UL-quality-based NO NO NO
LOFD-001090 /
inter-frequency
TDLOFD-001090
handovers are
LOFD-001019 /
enabled and UEs
TDLOFD-001019
can be handed over
LOFD-001020 /
to inter-frequency
TDLOFD-001020
cells to ensure
LOFD-001043 /
service continuity
TDLOFD-001043
when the UL signal
LOFD-001046 /
quality is poor. If
TDLOFD-001046
this option is
LOFD-001072 /
deselected, UL-
TDLOFD-001072
quality-based inter-
LOFD-001073 /
frequency
TDLOFD-001073
handovers are
TDLBFD-002018
disabled.
TDLOFD-001022
CsfbAdaptiveBlindH
TDLOFD-070228
oSwitch: This option
LOFD-081283 /
takes effect only
TDLOFD-081203
h: If this switch is
on, redirection to
UTRAN is enabled.
If this switch is
turned off,
redirection to
UTRAN is disabled.
GeranRedirectSwitc
h: If this switch is
LOFD-001022 /
on, redirection to
TDLOFD-001022
GERAN is enabled.
LOFD-001023 /
If this switch is off,
TDLOFD-001023
redirection to
LOFD-001033 /
GERAN is disabled.
TDLOFD-001033
CdmaHrpdRedirect
LOFD-001034 /
Switch: If this switch
TDLOFD-001034
is on, redirection to
LOFD-001019 /
CDMA2000 HRPD
TDLOFD-001019
is enabled. If this NO NO NO
LOFD-001020 /
switch is off,
TDLOFD-001020
redirection to
LOFD-001021 /
CDMA2000 HRPD
TDLOFD-001021
is disabled.
TDLOFD-001052
Cdma1xRttRedirect
TDLOFD-001088
Switch: If this switch
TDLOFD-001043
is on, redirection to
TDLOFD-001072
CDMA2000 1xRTT
TDLOFD-001046
is enabled. If this
TDLOFD-001073
switch is off,
redirection to
CDMA2000 1xRTT
is disabled.
BlindHoSwitch: If
this switch is on,
blind handovers for
CSFB are enabled.
If this switch is off,
Indicates whether
to enable downlink
(DL) inter-cell
interference
coordination (ICIC)
algorithms. This
parameter includes
the following
switches:
DlIcicSwitch_OFF_
LBFD-00202201 /
ENUM: Indicates
NO NO NO TDLBFD-00202201
that DL ICIC is
LOFD-00101401
disabled.
DlIcicDynamicSwitc
h_ON_ENUM:
Indicates that
dynamic DL ICIC is
enabled.
DlIcicStaticSwitch_
ON_ENUM:
Indicates that static
DL ICIC is enabled.
CDMA2000 cells.
CdmaEventAnrSwit
ch: If this option is
selected, event-
triggered ANR with
CDMA2000 is
enabled. This type
of ANR sets up and
optimizes inter-RAT
neighbor
relationships with
CDMA2000 cells as
triggered by events
for handovers to
CDMA2000
networks.
MlbBasedEventAnr
Switch: Indicates LOFD-002001 /
whether to enable TDLOFD-002001
NO NO NO
MLB-based event- LOFD-002002 /
triggered ANR. If TDLOFD-002002
MlbBasedEventAnr
Switch is
deselected, the
eNodeB does not
set up or optimize
neighbor
relationships based
on MLB
measurements. If
MlbBasedEventAnr
Switch and
IntraRatEventAnrS
witch are both
selected, the
eNodeB can
automatically set up
and optimize inter-
selected, load-
based redirection
can be performed.
GeranFlashRedirect
Switch: If this option
and the
GeranRedirectSwitc
h option are
selected, fast
redirection to
GERAN can be
performed.
UtranFlashRedirect
Switch: If this option LBFD-002023 /
and the TDLBFD-002023
UtranRedirectSwitc LBFD-002024 /
h option are TDLBFD-002024
selected, fast LOFD-00102901 /
redirection to TDLOFD-00102901
NO NO NO
UTRAN can be LOFD-001019 /
performed. TDLOFD-001019
LoadRedirectFreqO LOFD-001020 /
ptSwitch: Indicates TDLOFD-001020
whether to optimize LOFD-001021 /
the target frequency TDLOFD-001021
for the cell
redirection triggered
by admission
congestion or load
control. If this
option is selected,
the target
redirection
frequency is
selected from the
neighboring
frequencies whose
cell reselection
frequency handover
scenarios.
IntraFreqReselOptS
witch: If this switch
is on, the eNodeB
dynamically adjusts
intra-frequency cell
reselection
parameters, which
reduces the number
of unnecessary
handovers and
ensures a steady
handover success
rate. If this switch is
off, the eNodeB
does not adjust
intra-frequency cell
reselection LOFD-002005 /
NO NO NO
parameters. TDLOFD-002005
UtranUnnecHoOptS
witch: If this switch
is on, the eNodeB
dynamically adjusts
parameters about
handovers from E-
UTRAN to UTRAN
to reduce the
number of
unnecessary
handovers from E-
UTRAN to UTRAN,
increase the
probability that UEs
camp in LTE
networks, and
improve user
experience. If this
Indicates whether
to enable
optimization on
downlink packet
assembly at the
MAC layer when
cell loads are
unbalanced in
NO NO NO LOFD-00101502
heavy traffic
scenarios. The
optimization is
enabled only when
this switch is on.
This parameter
applies only to LTE
FDD.
Indicates the switch
for the TCP Proxy
Enhancer (TPE)
algorithm. The TPE
algorithm uses ACK
splitting to increase
the data rate of
TCP services at the
initial stage. If this
LOFD-001026
switch is on, the NO NO NO
TDLOFD-001028
TPE algorithm is
enabled and
applies only to UEs
that newly access
or reaccess the
network. If this
switch is off, the
TPE algorithm is
disabled.

Indicates whether
to support SPID-
based mobility
management in
connected mode. If
this parameter is
set to ON(On),
SPID-based
mobility LOFD-00105401 /
NO NO NO
management in TDLOFD-00105401
connected mode is
supported. If this
parameter is set to
OFF(Off), SPID-
based mobility
management in
connected mode is
not supported.
Indicates the switch
used to enable or
disable UL ICIC in
the frequency
domain. If this
switch is set to OFF,
UL ICIC in the
frequency domain
is disabled in the
eNodeB cells. If this
switch is set to
STATIC, static UL
ICIC in the
frequency domain LBFD-00202202 /
is enabled in the NO NO NO TDLBFD-00202202
eNodeB cells. If this LOFD-00101402
switch is set to
DYNAMIC, dynamic
UL ICIC in the
frequency domain
is enabled in the
eNodeB
cells,Dynamic ICIC
and static ICIC will
not take effect
when the UL
adaptive ICIC
switch of the cell is
turned on.
Indicates the
location services
(LCS) switch.
OtdoaSwitch: If the
switch is on,
observed time
difference of arrival-
based (OTDOA-
based) positioning
is enabled. If the
switch is off,
OTDOA-based
positioning is
disabled.EcidInterFr LOFD-001047 /
NO NO NO
eqMeasSwitch: If TDLOFD-001047
this option is
selected, the
function of RSRP
and RSRQ
measurements of
inter-frequency
neighboring cells
for E-CID-based
positioning is
enabled. If this
option is
deselected, this
function is disabled.
In this case, uplink
congestion may
occur in the
eNodeB, but
fairness and
differentiation for
combined services
are ensured.
A UE is considered
to have combined
services if the UE
has two or more
flow-controllable
non-GBR bearers.
Fairness and
differentiation for
combined services
of a UE are
LOFD-00301102 /
ensured if the NO NO NO
TDLOFD-00301102
uplink scheduling
algorithm allocates
bandwidths to these
flow-controllable
non-GBR bearers
based on weighting
factors for uplink
scheduling priorities
(UlschPriorityFactor
). If this switch is
on, the scheduling
algorithm is notified
to limit the number
of resource blocks
(RBs) allocated to
the UE in the case
of uplink
congestion.
Indicates whether
to display PCI
conflict alarms in
the alarm console.
Consider that this
parameter is set to
on. If
COLLISION_DETE
CT_SWITCH of the
PciConflictDetectS
witch parameter in
the
ENodeBAlgoSwitch
MO is on and PCI
collision occurs,
PCI collision alarms
are displayed in the
alarm console. If
CONFUSION_DET LOFD-002007 /
NO NO NO
ECT_SWITCH of TDLOFD-002007
the
PciConflictDetectS
witch parameter in
the
ENodeBAlgoSwitch
MO is on and PCI
confusion occurs,
PCI confusion
alarms are
displayed in the
alarm console. If
the
PciConflictAlmSwitc
h parameter is set
to off, PCI conflict
alarms are not
displayed in the
alarm console.
conservation
function. eNodeB-
level energy
conservation can
be implemented
based on symbol
power saving.
symbol power
saving applies to
LTE-only and LTE
Multi-mode base
stations. If this
function is enabled,
the eNodeB shuts
down PAs on the
corresponding RF
unit when it detects
that OFDM symbols
LOFD-001070 /
within the NO NO NO
TDLOFD-001070
subframes do not
contain any
downlink data to
transmit. This
reduces static
power consumption
and hence
conserves energy
for the eNodeB. If
the symbol saving
applies to LTE
Multi-Mode stations,
it should cooperate
with the energy
saving features of
other RAT which
share the same
resource with LTE
driven multiple
reports from
UTRAN cells. If this
switch is on, the
eNodeB can send
RAN-
INFORMATION-
REQUEST protocol
data units (PDUs)
to UTRAN cells to
request multiple
event-driven
reports. If this
switch is off, the
eNodeB cannot
send RAN-
LOFD-001034 /
INFORMATION-
TDLOFD-001034
REQUEST PDUs to
LOFD-001052 /
UTRAN cells to NO NO NO
TDLOFD-001052
request multiple
LOFD-001053 /
event-driven
TDLOFD-001053
reports.
GERAN_RIM_SWI
TCH: Indicates the
switch used to
enable or disable
the RIM procedure
that requests event-
driven multiple
reports from
GERAN cells. If this
switch is on, the
eNodeB can send
RAN-
INFORMATION-
REQUEST PDUs to
CERAN cells to
NBSLTEPLMNRou
ndSwitch overrides
NBSLTERANSharin
gSwitch.
NBSLTERANSharin
gSwitch: If this
switch is on, some
neighboring
eNodeBs provide
cells that work in
RAN sharing mode.
In this situation, if
IntraRatEventAnrS
witch or
IntraRatFastAnrSwit LOFD-002001 /
ch is on for the local TDLOFD-002001
eNodeB, the local LOFD-002002 /
eNodeB will ask the TDLOFD-002002
U2000 for the NO NO NO LOFD-001036 /
PLMN list for a cell TDLOFD-001036
after the UE reports LOFD-001037 /
the CGI of the cell TDLOFD-001037
during ANR LOFD-070206
measurements. If
the UE has
reported the
PLMNlist, the local
eNodeB will not ask
the U2000 for the
PLMN list.
NBSUTRANRANSh
aringSwitch: If this
switch is on, some
neighboring
NodeBs provide
cells that work in
UTRAN sharing
UtranFreqLayerBlin
dSwitch, and
UtranSrvccSwitch.
The setting of
UtranSrvccSwitch
takes effect only
when
UtranFreqLayerMea
sSwitch is on. If
UtranFreqLayerMea
sSwitch is on, the
UTRAN hierarchy-
based
measurement
algorithm takes
effect for
LOFD-001087
measurements
LOFD-001078 /
related to coverage-
TDLOFD-001078
based and CSFB-
NO NO NO TDLOFD-001022
triggered handovers
TDLOFD-001033
from E-UTRAN to
TDLOFD-001052
UTRAN. If
TDLOFD-001088
UtranFreqLayerBlin
dSwitch is on, the
UTRAN hierarchy-
based blind-
handover algorithm
takes effect for
coverage-based
and CSFB-triggered
blind handovers
from E-UTRAN to
UTRAN. If
UtranSrvccSwitch is
on, the UTRAN
SRVCC hierarchy-
based
measurement
Indicates the switch
used to enable or
disable the
LOFD-001092 /
eNodeB-level NO NO NO
TDLOFD-001092
commercial mobile
alert system
(CMAS).

Indicates the switch

used to enable or
disable the voice NO NO NO None
quality monitoring
algorithm.
users.
IntraOpUeNumPree
mptSwitch: This
parameter indicates
the switch used to
enable or disable
the intra-operator
preemption based
on the number of
users. If this switch
is on, when a user
cannot access the
network because of
the user number
restriction, the user
can preempt
resources of other
lower-priority users
served by the same LOFD-00102901 /
NO NO NO
operator. If this TDLOFD-00102901
switch is off,
preemption is not
allowed.
InterOpUeNumPree
mptSwitch: This
parameter indicates
the switch used to
enable or disable
the inter-operator
preemption based
on the number of
users. If this switch
is on, the inter-
operator
preemption based
on the number of
users is allowed. If
this switch is off, the
Indicates the switch
used to control
whether operators
can adopt different
policies. This
parameter is a bit-
filed-type
parameter. By
specifying the bit
fields under this
parameter,
operators can adopt
different policies on
the corresponding LOFD-001022
RAT. LOFD-001087
UtranSepOpMobility LOFD-001033
Switch is a switch LOFD-001052
used to control LOFD-001068
NO NO NO
whether operators LOFD-001088
can adopt different LOFD-001019
mobility policies on LOFD-001043
their UTRANs. If LOFD-001072
this switch is on, LOFD-001078
operators can adopt
different policies
(for example, PS
handover capability
and RIM-based
system information
reading capability)
on their UTRANs. If
this switch is off,
operators cannot
adopt different
policies on their
UTRANs.
UsSwitch:
Indicates whether
to enable inter-BBU
carrier aggregation
(CA) in scenarios
where CA is
configured based
on frequencies.
Inter-BBU CA is
enabled in the
preceding
scenarios only
when this switch is
LOFD-070223
on. This switch
LAOFD-00100101
takes effect only
LAOFD-00100102
when
LAOFD-001002 /
FreqCfgSwitch of
TDLAOFD-001002
the CaAlgoSwitch
LAOFD-00100202 /
parameter in the
NO NO NO TDLAOFD-
ENodeBAlgoSwitch
00100202
MO is on. Inter-BBU
LAOFD-070201 /
CA is enabled only
TDLAOFD-070201
when this switch is
LAOFD-070202
on.
TDLAOFD-
UlJROverRelaxedB
00100111
HSw: Indicates
whether to enable
the relaxed-
backhaul-based
inter-BBU
coordinating
algorithm.
UlJROverRelaxedB
HSw:
Indicates whether
to enable uplink
coordinated multi-
point (UL CoMP)
Indicates whether
to enable operator-
customized
algorithms.
LcsInterRatMeasSw
itch: Indicates the
switch used to
enable or disable
the eNodeB to
respond to the
inter-RAT
measurement
request sent from
the evolved serving
mobile location LOFD-001047 /
NO NO NO
center (E-SMLC). If TDLOFD-001047
this switch is on,
the eNodeB is
allowed to respond
to an inter-RAT
measurement
request sent from
the E-SMLC. If this
switch is off, the
eNodeB is not
allowed to respond
to an inter-RAT
measurement
request sent from
the E-SMLC.
settings of
InterFreqMlbSwitch
of the
MlbAlgoSwitch
parameter on the
target cell.
AddA2MeasIfQciAd
jSwitch: Indicates
whether an eNodeB
delivers inter-
frequency or inter-
RAT A2-related
measurement
configuration to the LBFD-00201802 /
UE when the QCI of TDLBFD-00201802
services running on LOFD-001019 /
the UE changes in TDLOFD-001019
a coverage-based LOFD-001020 /
handover. If this TDLOFD-001020
NO NO NO
switch is on, the LBFD-00201801 /
eNodeB performs TDLBFD-00201801
the following each LBFD-00201804 /
time the QCI is TDLBFD-00201804
changed: (1) LBFD-00201805 /
Updates the TDLBFD-00201805
delivered handover-
related parameters;
(2) Determines
whether inter-
frequency or inter-
RAT measurement
configurations need
to be delivered; (3)
Delivers the
configurations if
they are required
and have not been
delivered before, or
based inter-
frequency handover
protection when a
VoLTE exception
occurs. If this option
is selected and the
eNodeB does not
support VoLTE, the
eNodeB can set up
bearers for QCI-1
services and other
services when both
LBFD-00201802 /
of the following
TDLBFD-00201802
conditions are met:
LBFD-00201805 /
(1) The EPC
TDLBFD-00201805
delivers information
LBFD-002031 /
about bearers with
TDLBFD-002031
QCI 1 and other
LOFD-001019 /
QCIs; (2) The UE NO NO NO
TDLOFD-001019
exits the idle state;
LOFD-001020 /
(3) After the QCI-1
TDLOFD-001020
service bearers are
TDLOFD-001022
set up, the UE is
TDLOFD-001023
handed over to an
LAOFD-00100201 /
inter-frequency
TDLAOFD-001002
network. This option
applies only to LTE
TDD.
ApCqiAndAckAbnC
trlSwitch: Indicates
whether to enable a
workaround of
problems that may
occur when
aperiodic CQI
reports in 3-1
reporting mode and
Indicates the switch
used to enable or
LOFD-
disable neighboring
NO NO NO 002002/TDLOFD-
GERAN or UTRAN
002002
cell optimization for
blind handovers.

Indicates whether
the RAN
information MRFD-090211
management (RIM) LOFD-
procedure is 001052/TDLOFD-
initiated by the 001052
eCoordinator. If this LOFD-
parameter is set to 001019/TDLOFD-
ON, the RIM NO NO NO 001019
procedure is LOFD-
initiated by the 001044/TDLOFD-
eCoordinator. If this 001044
parameter is set to LOFD-
OFF, the RIM 001033/TDLOFD-
procedure is 001033
initiated by the core
network.
Indicates whether
the VoIP services
are enabled in the
E-UTRAN cell. This
parameter is used
for determining
whether the NO NO NO None
establishment,
handover in,
admission, and
reestablishment of
VoIP services is
allowed.
AdpCaSwitch:
Indicates whether
to enable adaptive
CA, which
incorporates blind
SCell configuration
into frequency-
based CA. Adaptive
CA is enabled only
when this option is
LAOFD-00100101
selected.
LAOFD-00100102
CaHoControlSwitch
LAOFD-00100201 /
:
TDLAOFD-
Indicates whether
00100201
unnecessary intra-
LAOFD-00100202 /
RAT handovers to
TDLAOFD-
non-macro cells are
00100102
prohibited. CA UEs
LAOFD-070201 /
can be handed over NO NO NO
TDLAOFD-070201
to non-macro cells
LAOFD-070202
during unnecessary
TDLAOFD-
intra-RAT
00100111
handovers only if
LAOFD-080202
this option is
LAOFD-080201
deselected.
LAOFD-080207
DistributeCloudbbC
LAOFD-080208
aSwitch:
LAOFD-110201
Indicates whether
to enable inter-
eNodeB CA based
on distributed Cloud
BB or not.
This type of CA is
enabled only when
this option is
selected.
SccSmartCfgSwitch
level mobility load
balancing.
INTER_FREQ_IDL
E_MLB_SWITCH:
Indicates whether
to enable eNodeB-
level inter-
frequency load
balancing for UEs
in idle mode. If the
INTER_FREQ_IDL
E_MLB_SWITCH
option of this
parameter and the
ADAPTIVE_PROP
ORTION option of
the
InterFreqIdleMlbMo
de parameter are LOFD-001032 /
NO NO NO
selected, the TDLOFD-001032
eNodeB timely
adjusts the
proportions of UEs
to be released
among frequencies
based on the
current proportions
of UEs in
connected mode
among frequencies
and the preset
proportions of UEs
in idle mode among
frequencies,
ensuring that the
actual proportions
of UEs in idle mode
among frequencies
tSwitch: Indicates
whether to consider
the transmission of
SRIs when
configuring
measurement gaps
for UEs in DRX
mode. If this option
is selected, the
eNodeB considers
the collaboration. If
this option is
deselected, the LBFD-00201802 /
eNodeB does not. TDLBFD-00201802
LaiCsfbBlindNCellS LOFD-001019 /
elSwitch: Indicates TDLOFD-001019
the policy of LOFD-001020 /
determining a target TDLOFD-001020
cell for LAI-based LBFD-00201804 /
NO NO NO
CSFB in a blind TDLBFD-00201804
manner (not based LBFD-00201805 /
on measurements). TDLBFD-00201805
If this switch is on, LBFD-00201805 /
the eNodeB TDLBFD-00201805
preferentially LOFD-001033 /
selects the TDLOFD-001033
neighboring cell
with the highest
blind handover
priority; if multiple
cells have the same
priority, the eNodeB
selects a cell with
the same LAI as the
source cell. If this
switch is off, the
eNodeB
preferentially
can be initiated by
the RLC layer
based on the
number of UEs in
the cell. If this
switch is OFF, the
eNodeB does not
adaptively configure
the maximum
number of special
signaling
retransmissions LOFD-001019 /
based on the TDLOFD-001019
number of UEs in LOFD-001020 /
the cell. TDLOFD-001020
FlowCtrlTriBackoffS LOFD-001043 /
witch: Indicates TDLOFD-001043
whether to enable LOFD-001046 /
flow-control- NO NO NO TDLOFD-001046
triggered backoff. LOFD-001072 /
Consider that the TDLOFD-001072
network is heavily LOFD-001073 /
loaded and Msg3 TDLOFD-001073
flow control starts. If LOFD-001078
this option is ON, LOFD-002015 /
flow-control- TDLOFD-002015
triggered backoff is
enabled, and UEs
that fail random
accesses are
postponed to
reinitiate random
access requests,
thereby relieving
RACH congestion.
If this option is OFF,
flow-control-
LOADNOTBALANC
ESCHSWITCH:
Indicates whether
to enable MAC
scheduling
optimization for
cells with
unbalanced inter- LOFD-00101502 /
NO NO NO
cell or intra-cell TDLOFD-00101502
(uplink and
downlink) loads in
heavy traffic
scenarios. The
optimization is
enabled only when
this switch is on.
when this
parameter is set to
ON. This parameter
does not apply to
the eNodeB
equipped with
LBBPc boards nor
LTE TDD.
Note that the
PRACH subframe
configuration is
determined based
on both the default
PRACH subframe
configuration and
the
PrachConfigIndexC
fgInd parameter. If
the NO NO NO LBFD-002010
PrachConfigIndexC
fgInd parameter is
set to CFG, the
actual PRACH
subframe
configuration is
specified by the
PrachConfigIndex
parameter. If the
PrachConfigIndexC
fgInd parameter is
set to NOT_CFG,
the default PRACH
subframe
configuration
functions as the
actual PRACH
subframe
Indicates whether
cyclic shift (CS) is
used in preamble
generation in high-
speed mobility
scenarios. If this
parameter is set to
on, CS is used in
preamble
generation in high-
speed mobility
scenarios, and the
number of root LOFD-001007 /
NO NO NO
sequences required TDLOFD-001007
in the cell is
relatively small. If
this parameter is
set to off, CS is not
used in preamble
generation in high-
speed mobility
scenarios, and the
number of root
sequences required
in the cell is
relatively large.

TransDropPktsStat
Switch: Indicates
whether to enable
collection on
packets dropped
during transmission.
Collection on
packets dropped
during transmission
is enabled only
when
TransDropPktsStat
Switch is on. If the NO NO NO None
status of
TransDropPktsStat
Switch is changed
from off to on, the
change applies only
to newly accessed
UEs. Collection on
packets dropped
during transmission
is disabled when
TransDropPktsStat
Switch is off.
of the following
switches:
GERAN_SWITCH:
Indicates whether
the eNodeB
prioritizes
measurement
priorities of LOFD-
neighboring 002002/TDLOFD-
GERAN cells based 002002
on the number of LOFD-
each neighboring 001022/TDLOFD-
GERAN cell is 001022
measured within a LOFD-
period of time. The 001033/TDLOFD-
eNodeB prioritizes 001033
measurement LOFD-
priorities only when 001052/TDLOFD-
this switch is on. 001052
NO NO NO
UTRAN_SWITCH: LOFD-
Indicates whether 001053/TDLOFD-
the eNodeB 001053
prioritizes LOFD-
measurement 001019/TDLOFD-
priorities of 001019
neighboring UTRAN LOFD-
cells based on the 001043/TDLOFD-
number of each 001043
neighboring UTRAN LOFD-
cell is measured 001072/TDLOFD-
within a period of 001072
time. The eNodeB
prioritizes
measurement
priorities of
neighboring UTRAN
cells based on the
number of each

This parameter is
unavailable in this NO NO NO None
version.
Indicates whether
to enable load
balancing between
baseband
processing units
(BBPs) in a
baseband
collaboration group.
L2LoadBalanceSwit
ch: If this switch is
on, lightly-loaded
BBPs can share
loads in heavily-
loaded BBPs to NO NO NO None
decrease the CPU
usage in the heavily
loaded BBPs,
thereby avoiding
BBP overload. If
this switch is off,
load balancing
between BBPs is
disabled. At
present, only the
UBBPd can share
loads on the
LBBPc.
Indicates whether
to enable root
sequence conflict
detection. If this
parameter is set to
ON, the eNodeB
checks whether the
PRACH root
sequence of the
local cell conflict
with that of its intra-
frequency
neighboring cell. If
such a conflict
LOFD-002015 /
occurs, the alarm NO NO NO
TDLOFD-002015
about the conflict is
displayed in the
alarm console. If
this parameter is
set to OFF, the
eNodeB does not
check whether such
a conflict exists,
and the alarm about
such conflicts is not
displayed in the
alarm console even
if such a conflict
occurs.
Indicates whether
to enable intelligent
optimization
algorithms. This
parameter includes
the following
switches:
ACHSwitch: If this
switch is on, the
eNodeB periodically
determines whether
to adjust
parameters based
on the predefined LOFD-081205
NO NO NO
adaptive parameter TDLOFD-081209
adjustment rules
and adjusts
parameters if the
predefined adaptive
parameter
adjustment rules
are met. Therefore,
network
performance
reaches the
optimum in
congestion
scenarios.

Indicates whether
services in a
service group can
be transferred to
different E-UTRAN
frequencies by
service-based
handovers. This
parameter applies
only to LTE FDD. If
this parameter is
set to ON, services
in a service group NO NO NO None
can be transferred
to different E-
UTRAN frequencies
specified in the
ServiceIfDlEarfcnGr
p MO. If this
parameter is set to
OFF, services in a
service group can
be transferred only
to the frequency
with an index of 0.
tch/RFResetSwitch:
If
BaseBandResetSwi
tch/RFResetSwitch
is on, the eNodeB
determines whether
a soft failure occurs
based on the board
self-check result on
the BBP/RRU,
number of random
access messages,
and uplink and
downlink
throughput. If the
fault affects
services, the
LBBPc/RRU is
reset to recover LOFD-002012 /
NO NO NO
services. TDLOFD-002012
BBPResetDelaySwi
tch/RFResetDelayS
witch: If
BBPResetDelaySwi
tch/RFResetDelayS
witch is on, the
LBBPc/RRU is
reset at 02:00 in the
morning to recover
services after soft
faults are detected
and service
exceptions occur. If
BBPResetDelaySwi
tch/RFResetDelayS
witch is off, the
LBBPc/RRU is
reset immediately
to ON, PCI collision
information is
displayed on the
alarm console if a
PCI collision
occurs. If the
COLLISION_DETE
CT_SWITCH option
of the
ENodeBAlgoSwitch
.PciConflictDetectS
witch parameter is
deselected or the
ENodeBAlgoSwitch
.PciConflictAlmSwit
ch parameter is set
to OFF, PCI
collision information
LOFD-002007 /
is not displayed on NO NO NO
TDLOFD-002007
the alarm console.
For details about
PCI collisions, see
3GPP TS 36.902.If
the
CONFUSION_DET
ECT_SWITCH
option of the
ENodeBAlgoSwitch
.PciConflictDetectS
witch parameter is
selected and the
ENodeBAlgoSwitch
.PciConflictAlmSwit
ch parameter is set
to ON, PCI
confusion
information is
Indicates whether
to enable or disable
load balancing
algorithms in CA
scenarios, The
DlCaLbAlgoSwitch
check box under
this parameter
controls load
adjustment among
different carriers
after the load
balancing algorithm
is enabled in
downlink CA
scenarios. This
parameter applies NO NO NO TDLOFD-081219
only to LTE TDD
cells.
If the
DlCaLbAlgoSwitch
check box is on, the
load balancing
algorithm is
enabled in downlink
CA scenarios. If the
DlCaLbAlgoSwitch
check box is off, the
load balancing
algorithm is
disabled in
downlink CA
scenarios.

Indicates whether
to advance uplink
scheduling. The
parameter value
ON(On) is
recommended to
advance uplink
scheduling when
the network is
heavily loaded. The NO NO NO LOFD-00101502
parameter value
OFF(Off) is
recommended not
to advance uplink
scheduling when
the network is
lightly loaded. This
parameter applies
only to LTE FDD.
This parameter is
unavailable in this NO NO NO None
version.

Indicates whether
the eNodeB
reestablishes cells if
a clock transient
occurs. If this
parameter is set to
ON(On), the
eNodeB
reestablishes cells if NO NO NO None
a clock transient
occurs. If this
parameter is set to
OFF(Off), the
eNodeB does not
reestablish cells if a
clock transient
occurs.
in idle
mode.ADAPTIVE_
PROPORTION:
Indicates whether
the eNodeB adjusts
the proportions of
UEs in idle mode
among frequencies
during eNodeB-
level inter-
frequency load
balancing for UEs
in idle mode.If the
ADAPTIVE_PROP
ORTION option of
this parameter and
the
INTER_FREQ_IDL
E_MLB_SWITCH NO NO NO None
option of the
MlbAlgoSwitch
parameter are
selected, the
eNodeB timely
adjusts the
proportions of UEs
to be released
among frequencies
based on the
current proportions
of UEs among
frequencies and the
preset proportions
of UEs among
frequencies,
ensuring that the
proportions of UEs
in a cell during
eNodeB-level inter-
frequency load pre-
balancing. If both
INTER_FREQ_IDL
E_MLB_SWITCH of
the MlbAlgoSwitch
parameter in the
ENodeBAlgoSwitch
MO and
ADAPTIVE_PROP
ORTION of the
InterFreqIdleMlbMo
de parameter in the
eNodeBMlb MO are
on, the eNodeB
collects the number
of uplink
synchronized UEs NO NO NO None
at an interval
specified by the
InterFreqIdleMlbInt
erval parameter. At
the end of a
measurement
period, the eNodeB
adaptively adjusts
the proportions in
which to-be-
released UEs camp
on cells operating
at different
frequencies. If the
InterFreqIdleMlbInt
erval parameter is
set to off, the
eNodeB does not
on cells operating in
different
frequencies based
on the actual
statistic results
during eNodeB-
level inter-
frequency load pre-
balancing. If both
INTER_FREQ_IDL
E_MLB_SWITCH of
the MlbAlgoSwitch
parameter in the
ENodeBAlgoSwitch
MO and
ADAPTIVE_PROP
ORTION of the
InterFreqIdleMlbMo
de parameter in the NO NO NO None
eNodeBMlb MO are
on, the eNodeB
performs periodic
statistics on the
average number of
uplink synchronized
UEs in a cell. If the
sum of the average
number of uplink
synchronized UEs
in all cells is greater
than or equal to this
parameter value,
the eNodeB
updates the
proportion in which
to-be-released UEs
camp on cells
Indicates the
maximum number
of carriers
aggregated for a
CA UE whose load
is to be transferred
for load balancing.
If this parameter is
set to 2CC, load of
CA UEs using two
component carriers
(CCs) can be NO NO NO TDLOFD-081219
transferred for load
balancing. If this
parameter is set to
3CC, load of CA
UEs using two CCs
and three CCs can
be transferred for
load balancing.
This parameter
applies only to LTE
TDD cells.

Indicates the
minimum data
volume ratio
between two CCs
of a CA UE whose
load is to be
transferred. For
example, if this
parameter is set to
20, the minimum
ratio of the data
volume on a heavily
loaded CC to that
on a lightly loaded
CC is 1/5. If this NO NO NO TDLOFD-081219
parameter is set to
0, the minimum
ratio of the data
volume on a heavily
loaded CC to that
on a lightly loaded
CC is 0/1, that is, all
data on the heavily
loaded CC can be
transferred to the
lightly loaded CC.
This parameter
applies only to LTE
TDD cells.
Indicates the
proportion of the UL
licensed traffic to
the total licensed
traffic of the
LOFD-001036 /
eNodeB. The total
TDLOFD-001036
licensed traffic is
NO NO NO LOFD-001037 /
the sum of UL and
TDLOFD-001037
DL licensed traffic.
LOFD-070206
If this parameter is
set to 100%, there
is no DL licensed
traffic, affecting
service admission.

Indicates the mode

of traffic sharing
between the
operators in RAN
sharing scenarios.
If this parameter is
set to SHARING, all
the operators share
the total traffic of
the eNodeB without
proportional limits. If
this parameter is
LOFD-001036 /
set to DEDICATE
TDLOFD-001036
and the
NO NO NO LOFD-001037 /
ENodeBSharingMo
TDLOFD-001037
de parameter is not
LOFD-070206
set to
INDEPENDENT, all
the operators share
the total traffic of
the eNodeB based
on specific
proportions.
However, the
vacant traffic of an
operator can be
used by other
operators.

LOFD-001036 /
TDLOFD-001036
Indicates the ID of
YES YES NO LOFD-001037 /
the operator.
TDLOFD-001037
LOFD-070206
Indicates the
proportion of traffic
used by the
operator when the
eNodeB is shared
among operators.
LOFD-001036 /
This parameter
TDLOFD-001036
must be set based
NO NO NO LOFD-001037 /
on the contract
TDLOFD-001037
signed by
LOFD-070206
operators. If this
parameter is set to
0, services except
emergency calls of
this operator are
not admitted.

Indicates the
proportion of traffic
that the operator
LOFD-001036 /
can share with
NO NO NO TDLOFD-001036
other operators
LOFD-070206
when the eNodeB
is shared among
operators.
Indicates the period
of measurement for
MRO. During the
period, the number
of handovers is
measured and
abnormal scenarios
(including
premature LOFD-002005 /
NO NO NO
handover, delayed TDLOFD-002005
handover, and ping-
pong handover) are
identified. After the
period elapses, the
eNodeB makes a
decision on
parameter
adjustment.

Indicates the
handover success
rate threshold for
enabling mobility-
related parameter
optimization. If the
handover success
LOFD-002005 /
rate is greater than NO NO NO
TDLOFD-002005
this parameter
value, mobility-
related parameters
are optimized to
reduce the number
of ping-pong
handovers.

Indicates the
threshold of the
number of
handovers
(including outgoing
handover attempts
and delayed
handovers)
required for
enabling
optimization of
LOFD-002005 /
intra-RAT mobility- NO NO NO
TDLOFD-002005
related parameters.
Optimization of
intra-RAT mobility-
related parameters
is started when the
number of
handovers from the
local cell to an intra-
RAT neighboring
cell reaches this
threshold.
Indicates the time
threshold for ping-
pong handover. If a
UE is handed over
back to the source
cell after staying in
the target cell for a
LOFD-002005 /
period shorter than NO NO NO
TDLOFD-002005
this threshold, the
eNodeB decides
that a ping-pong
handover occurs
based on the
history information
about this UE.

Indicates the
threshold for the
percentage of intra-
RAT ping-pong
handovers. If the
percentage of intra-
RAT ping-pong
handovers is
greater than this
LOFD-002005 /
parameter value, NO NO NO
TDLOFD-002005
parameters are
adjusted to reduce
the number of ping-
pong handovers. If
the percentage is
less than or equal
to this parameter
value, parameters
are not adjusted.
Indicates the
threshold for the
percentage of
coverage-induced
abnormal
handovers to all
abnormal
handovers from the
serving cell to a
neighboring cell. If
the percentage is
LOFD-002005 /
greater than or NO NO NO
TDLOFD-002005
equal to this
threshold when a
mobility robustness
optimization (MRO)
period approaches
its end, the eNodeB
does not adjust
MRO-related
parameters of the
neighboring cell
within this period.

received power
(RSRP) threshold
for the serving cell.
The threshold is
used to identify
abnormal coverage
in a serving cell. If a
UE successfully
reestablishes an
RRC connection or
reaccess the
serving cell after a
radio link failure
(RLF) or a
handover failure,
the UE sends the
eNodeB an RLF
report, which
LOFD-002005 /
includes the RSRP NO NO NO
TDLOFD-002005
values of the
serving cell and
neighboring cell. If
the RSRP value of
the serving cell is
less than this
parameter value
and the RSRP
value of the
neighboring cell is
less than the
NeighborRsrpThd
parameter value,
this RLF or
handover failure is
induced by
abnormal coverage
rather than
(RSRP) threshold
for neighboring
cells. The threshold
is used to identify
coverage-induced
abnormal
handovers from the
serving cell to the
neighboring cell. If
a UE successfully
reestablishes an
RRC connection or
reaccess the
serving cell after a
radio link failure
(RLF) or a
handover failure,
the UE sends the
LOFD-002005 /
eNodeB an RLF NO NO NO
TDLOFD-002005
report, which
includes the RSRP
values of the
serving cell and
neighboring cell. If
the RSRP value of
the serving cell is
less than the
ServingRsrpThd
parameter value
and the RSRP
value of the
neighboring cell is
less than this
parameter value,
this RLF is induced
by abnormal
coverage rather
Indicates the
threshold for the
number of pingpong
handovers. If the
number of LOFD-002005 /
NO NO NO
consecutive ping- TDLOFD-002005
pong handovers
reaches the
threshold, the UE is
a ping-pong UE.
Indicates the
percentage
threshold of
delayed handovers
caused by low
threshold of the
event A2 and
delayed inter-
frequency
measurements to
the sum of
premature LOFD-002005 /
NO NO NO
handovers and TDLOFD-002005
delayed handovers.
If the actual
percentage is
greater than this
parameter value,
the threshold for
triggering inter-
frequency event A2
is adjusted by the
inter-frequency
MRO.

Indicates the
threshold of event
A2 rollback
triggered by inter-
frequency MRO. If
the percentage of
too late handovers
caused by late
LOFD-002005 /
inter-frequency NO NO NO
TDLOFD-002005
measurement to the
sum of too early
handovers and too
late handovers is
less than the
threshold, the event
A2 rollback is
triggered.
Indicates the mode
in which MRO takes
effect. If this
parameter is set to
FREE, the eNodeB
automatically
optimizes handover
and reselection
parameters. If this
parameter is set to
CONTROLLED, the
eNodeB only
LOFD-002005 /
reports the NO NO NO
TDLOFD-002005
handover or
reselection
parameters to be
optimized to the
U2000, and the
U2000 delivers the
optimization on
handover or cell
reselection
parameters after
users confirm the
optimization.

Indicates the
threshold for the
inter-RAT handover
success rate used
to evaluate MRO
against
unnecessary inter-
LOFD-002005 /
RAT handovers. If NO NO NO
TDLOFD-002005
the inter-RAT
handover success
rate is greater than
or equal to this
parameter value,
this type of MRO is
triggered.
Indicates the
reference signal
received power
(RSRP) threshold
used to determine
whether an inter-
RAT handover is an
unnecessary
handover. After an
inter-RAT handover,
if the RSRP value
of the source E-
UTRAN cell LOFD-002005 /
NO NO NO
measured by the TDLOFD-002005
UE in the target cell
is consecutively
greater than or
equal to this
parameter value
within the specified
period of time, the
eNodeB considers
that the inter-RAT
handover is an
unnecessary
handover.
Indicates the
minimum value
within the range for
inter-RAT A2 event
threshold LOFD-002005 /
NO NO NO
adjustment. In the TDLOFD-002005
current version, this
parameter applies
only to LTE TDD
cells.

Indicates the
threshold of the
number of
handovers
(including outgoing
handover attempts
and delayed
handovers)
required for
enabling
optimization of
LOFD-002005 /
inter-RAT mobility- NO NO NO
TDLOFD-002005
related parameters.
Optimization of
inter-RAT mobility-
related parameters
is started when the
number of
handovers from the
local cell to inter-
RAT neighboring
cells reaches this
threshold.
the premature intra-
RAT handovers is
higher than this
threshold and the
current cell
individual offset
(CIO) is greater
than the CIO
adjustment
threshold, mobility
parameters need to
be adjusted. If the
proportion of the
premature intra-
RAT handovers is
less than or equal
to this parameter
value, mobility
LOFD-002005 /
parameters do not NO NO NO
TDLOFD-002005
need to be
adjusted. If both
this parameter and
the
IntraRatTooLateHo
RatioThd parameter
are set to 50% or
smaller values, the
conditions for
optimizing both
premature and
delayed intra-RAT
handovers may be
met. In this case,
delayed intra-RAT
handovers, which
increase the service
drop rate at a
handovers. If the
proportion of the
delayed intra-RAT
handovers is higher
than this threshold
and the current cell
individual offset
(CIO) is less than
the CIO adjustment
threshold, mobility
parameters need to
be adjusted. If the
proportion of
delayed intra-RAT
handovers is less
than or equal to this
parameter value,
mobility parameters
do not need to be LOFD-002005 /
NO NO NO
adjusted. If both TDLOFD-002005
this parameter and
the
IntraRatTooEarlyHo
RatioThd parameter
are set to 50% or
smaller values, the
conditions for
optimizing both
premature and
delayed intra-RAT
handovers may be
met. In this case,
delayed intra-RAT
handovers, which
increase the service
drop rate at a
higher probability
than premature
Indicates the
threshold of the
proportion of
abnormal intra-RAT
handovers. If the
proportion of
abnormal
handovers is higher
than the threshold,
MRO against
abnormal intra-RAT
handovers is
LOFD-002005 /
enabled. If the NO NO NO
TDLOFD-002005
proportion of the
abnormal
handovers is lower
than or equal to the
threshold, MRO
against abnormal
intra-RAT
handovers is not
enabled. Abnormal
handovers include
both premature and
delayed handovers.

Indicates the
number of MRO
periods for lowering
the reference signal
received power
(RSRP) threshold. If
the conditions for
lowering the RSRP
threshold in inter-
frequency A2- LOFD-002005 /
NO NO NO
related delayed TDLOFD-002005
handovers are met
for the consecutive
number of MRO
periods specified by
this parameter, the
RSRP threshold for
triggering inter-
frequency event A2
is lowered.
value, the eNodeB
considers that the
cell is unstable.
A larger value of
parameter results in
a higher probability
that intra-RAT MRO
determines intra-
RAT handovers as
premature
handovers and
adjusts parameters
to reduce the
number of
premature
handovers. This
decreases the
number of
LOFD-002005 /
handovers and the NO NO NO
TDLOFD-002005
probability of
delayed handovers.
A smaller value of
this parameter
results in a higher
probability that
intra-RAT MRO
determines intra-
RAT handovers as
delayed handovers
and adjusts
parameters to
reduce the number
of delayed
handovers. This
increases the
number of
handovers.
Indicates the
threshold for
triggering
optimization against
abnormal inter-RAT
handovers. If the
ratio of abnormal
inter-RAT
handovers is
greater than or
equal to this
threshold, the
eNodeB determines
whether to adjust
mobility LOFD-002005 /
NO NO NO
parameters. If the TDLOFD-002005
ratio of abnormal
inter-RAT
handovers is less
than this threshold,
the eNodeB does
not determine
whether to adjust
mobility
parameters.
Abnormal
handovers include
delayed handovers
and premature
handovers.
Indicates the
percentage
threshold of
delayed inter-RAT
handovers caused
by delayed inter-
RAT measurements
to the sum of
abnormal inter-RAT
handovers
(including
premature
LOFD-002005 /
handovers and NO NO NO
TDLOFD-002005
delayed
handovers). If the
actual percentage
of delayed A2-
related inter-RAT
handovers is
greater than this
parameter value,
optimization on the
threshold for inter-
RAT event A2 is
triggered.
Indicates the
threshold for the
percentage of
unnecessary inter-
RAT handovers
used to evaluate
inter-RAT MRO
against
LOFD-002005 /
unnecessary NO NO NO
TDLOFD-002005
handovers. If the
percentage of
unnecessary inter-
RAT handovers is
greater than this
parameter value,
this type of MRO is
triggered.
Indicates the
measurement time
used to determine
whether an inter-
RAT handover is an
unnecessary
handover. After an
inter-RAT handover,
if the reference
signal received
power (RSRP)
value of the source
E-UTRAN cell LOFD-002005 /
NO NO NO
measured by the TDLOFD-002005
UE in the target cell
is consecutively
greater than a
preset threshold
within the period of
time specified by
this parameter, the
eNodeB considers
that the inter-RAT
handover is an
unnecessary
handover.

Indicates the index

of a simulated load
configuration. One
BS can store 10
YES YES NO None
simulated load
configurations,
which are identified
by the indexes.
Indicates the RB
usage threshold of
a simulated load
configuration. If the
RB usage of a cell
NO NO NO None
is below this
threshold, the
simulated load
scheduling is
performed.
Indicates the power
usage threshold of
a simulated load
configuration. If the
power usage of a
NO NO NO None
cell is below this
threshold, the
simulated load
scheduling is
performed.

Indicates the
reporting period for
simulated load. The
NO NO NO None
value 0 indicates
that simulated load
is not reported.

Indicates the
measurement
period for simulated
load. The value 0 NO NO NO None
indicates that
simulated load is
not measured.
Indicates the switch
that is used to
control whether to
enable and disable
the frequency-
selective
scheduling in
simulated load
configuration. If the
NO NO NO None
switch is set to ON,
the frequency-
selective
scheduling is
enabled. If the
switch is set to OFF,
the frequency-
diversity scheduling
is used.
Indicates whether
to enable or disable LOFD-001026 /
NO NO NO
the TCP ACK TDLOFD-001028
control algorithm.

Indicates the
maximum downlink
throughput in the
TCP ACK control
algorithm. If this
LOFD-001026 /
parameter is set to NO NO NO
TDLOFD-001028
0, the downlink
throughput in the
TCP ACK control
algorithm is not
under control.

Indicates the timer

length for the TCP
ACK control
algorithm. This
timer can be used
to control traffic of LOFD-001026 /
NO NO NO
the ACKs to uplink TDLOFD-001028
TCP packets,
therefore
preventing traffic
bursts in the
downlink.
Indicates the switch
used to enable or
disable the TCP
MSS function. If this
switch is turned off,
TCP packets are
transparently
LOFD-001026 /
transmitted without NO NO NO
TDLOFD-001028
being processed. If
this switch is turned
on, the value of the
MSS field in each
packet for TCP link
setups can be
modified.

Indicates the
threshold for the
value of the MSS
field in packets for
TCP link setups. If
the TCP MSS
function is enabled,
the eNodeB first
checks the MSS
field in each packet
for TCP link setups.
If the value of the
MSS field is greater
than the predefined
threshold, the LOFD-001026 /
NO NO NO
eNodeB changes TDLOFD-001028
the value of the
MSS field to the
predefined
threshold. Then, the
eNodeB
recalculates the
TCP checksum and
retransmits the
packet with
modified fields. For
other packets, the
eNodeB
transparently
transmits them.
Indicates the time
TDLBFD-001007
delay of the frame
TDLBFD-00100701
start time for all
TDLBFD-00100702
TDD E-UTRAN
NO NO NO TDLOFD-001026
cells under the
TDLOFD-00102601
eNodeB to the time
TDLOFD-00102602
of the reference
TDLOFD-00102603
clock.

Indicates the switch

for forcibly
activating a TDD
cell. If this
parameter is set to
ON, a TDD cell can
be activated when
no clock resource is
available. If this
parameter is set to
LBFD-002008 /
OFF, a TDD cell NO NO NO
TDLBFD-002008
cannot be activated
when no clock
resource is
available. This
parameter cannot
be set to ON when
there are inter-BBU
services because
the services will be
affected.
Indicates whether
to prohibit the
eNodeB from
setting up a cell or
sector (that is not
bound to baseband
equipment) on the
baseband
equipment that has
been bound to
another cell or
NO NO NO None
sector. If this
parameter is set to
ON and the
baseband
equipment is bound
to a cell or sector, a
cell or sector that is
not bound to the
baseband
equipment cannot
be set up on it.

Indicates the
number of ports LOFD-001026 /
NO NO NO
that enable TCP TDLOFD-001028
acceleration.

Indicates port 1 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 2 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 3 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 4 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 5 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.
Indicates port 6 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 7 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 8 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 9 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 10 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 11 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 12 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 13 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 14 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 15 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 16 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 17 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 18 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.
Indicates port 19 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates port 20 to
LOFD-001026 /
which TPE is to be NO NO NO
TDLOFD-001028
applied.

Indicates the
maximum UL voice
packet delay
variation allowed on
the Uu interface. If
the actual delay
variation of a UL
voice packet
exceeds this limit,
this packet is NO NO NO None
regarded as lost
during the
evaluation of voice
quality indicator
(VQI). The delay
variation is
measured at the
eNodeB PDCP
layer.
Indicates the voice
quality indicator
(VQI) threshold for
determining the
voice quality is
good. If the VQI
evaluation value is
greater than the
VqiGoodThd
parameter value
and less than or
equal to the
VqiExcellentThd
parameter value, NO NO NO None
the voice quality is
considered as
good. If the VQI
evaluation value is
less than or equal
to the VqiGoodThd
parameter value
and greater than
the VqiPoorThd
parameter value,
the voice quality is
considered as
accepted.

Indicates the voice

quality indicator
(VQI) threshold for
determining the
voice quality is
poor. If the VQI
evaluation value is
greater than the
VqiBadThd
parameter value
and less than or
equal to the
VqiPoorThd
parameter value, NO NO NO None
the voice quality is
considered as poor.
If the VQI
evaluation value is
less than or equal
to the VqiGoodThd
parameter value
and greater than
the VqiPoorThd
parameter value,
the voice quality is
considered as
accepted.
Indicates the voice
quality indicator
(VQI) threshold
equal to or below NO NO NO None
which the voice
quality is
considered as bad.

Indicates the
threshold of
adaptive multirate
wideband (AMR-
WB) voice services
that are normally
released due to
packet loss over the
air interface.
Consider that the
VQMAlgoSwitch
parameter in the
ENodeBAlgoSwitch
MO is set to
NO NO NO None
VQM_ALGO_SWIT
CH_ON. If the
packet loss rate in
the uplink or
downlink over the
air interface of the
UE performing an
AMR-WB voice
service exceeds
this threshold, the
UE is regarded to
initially hang up the
voice service due to
poor voice quality.
Indicates the
threshold of
adaptive multirate
narrowband (AMR-
NB) voice services
that are normally
released due to
packet loss over the
air interface.
Consider that the
VQMAlgoSwitch
parameter in the
ENodeBAlgoSwitch
MO is set to
NO NO NO None
VQM_ALGO_SWIT
CH_ON. If the
packet loss rate in
the uplink or
downlink over the
air interface of the
UE performing an
AMR-NB voice
service exceeds
this threshold, the
UE is regarded to
initially hang up the
voice service due to
poor voice quality.
Indicates the
number of periods
that is used to
evaluate whether a
voice service is
muted due to poor
voice quality. If an
AMR wideband
(AMR-WB) or AMR
narrowband (AMR- NO NO NO None
NB) voice service
performed by a UE
is muted in
consecutive periods
specified by this
parameter, the UE
is regarded to
normally hang up
the voice service.
Indicates the
number of periods
that is used to
evaluate whether a
voice service is
released due to
poor voice quality. If
the voice quality of
an AMR wideband
(AMR-WB) or AMR
NO NO NO None
narrowband (AMR-
NB) voice service is
poor in consecutive
periods specified by
this parameter, the
UE is regarded to
normally hang up
the voice service
due to poor voice
quality.

Indicates the voice

quality indicator
(VQI) threshold
above which the NO NO NO None
voice quality is
considered as
excellent.
Indicates the
threshold of
adaptive multirate
narrowband (AMR-
NB) voice services
are muted due to
packet loss.
Consider that the
VQMAlgoSwitch
parameter in the
ENodeBAlgoSwitch
MO is set to
NO NO NO None
VQM_ALGO_SWIT
CH_ON. If the
packet loss rate in
the uplink or
downlink of the UE
performing an AMR-
NB voice service
exceeds this
threshold, voice
mute is regarded to
occur during
communication.
Indicates the
threshold of
adaptive multirate
wideband (AMR-
WB) voice services
that are normally
released due to
poor voice quality
caused by receive
packet loss.
Consider that the
VQMAlgoSwitch
parameter in the
ENodeBAlgoSwitch
NO NO NO None
MO is set to
VQM_ALGO_SWIT
CH_ON. If the
packet loss rate in
the uplink or
downlink of the UE
performing an AMR-
WB voice service
exceeds this
threshold, the UE is
regarded to initially
hang up the voice
service due to poor
voice quality.
Indicates the
threshold of
adaptive multirate
narrowband (AMR-
NB) voice services
that are normally
released due to
poor voice quality
caused by receive
packet loss.
Consider that the
VQMAlgoSwitch
parameter in the
ENodeBAlgoSwitch
NO NO NO None
MO is set to
VQM_ALGO_SWIT
CH_ON. If the
packet loss rate in
the uplink or
downlink of the UE
performing an AMR-
NB voice service
exceeds this
threshold, the UE is
regarded to initially
hang up the voice
service due to poor
voice quality.
Indicates the
threshold of
adaptive multirate
wideband (AMR-
WB) voice services
that are muted due
to packet loss.
Consider that the
VQMAlgoSwitch
parameter in the
ENodeBAlgoSwitch
MO is set to
NO NO NO None
VQM_ALGO_SWIT
CH_ON. If the
packet loss rate in
the uplink or
downlink of the UE
performing an AMR-
WB voice service
exceeds this
threshold, voice
mute is regarded to
occur during
communication.

Indicates the
License Alarm
Detect Period. The
eNodeB detects
license control
items every other LBFD-004014 /
NO NO NO
interval and reports TDLBFD-004014
a license-related
alarm if the
corresponding
reporting condition
is met.

Indicates the
License Alarm
Occur Threshold. A
license alarm is
generated if the
proportion of the LBFD-004014 /
NO NO NO
actually used value TDLBFD-004014
to the allocated
value of the license
control item
exceeds this
threshold.
Indicates the
License Alarm
Recover Period.
During this interval,
the eNodeB detects
LBFD-004014 /
license control NO NO NO
TDLBFD-004014
items and clears
license alarms if the
condition for
clearing license
alarms is met.

Indicates the
License Alarm
Recover Threshold.
A license alarm is
cleared if the
proportion of the LBFD-004014 /
NO NO NO
actually used value TDLBFD-004014
to the allocated
value of the license
control item is
below this
threshold.

Indicates reserved
32-bit switch
parameter 0 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 1 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
32-bit switch
parameter 2 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates the 32-bit
reserved parameter
3 that is reserved
for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
NO NO NO None
patch versions and
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 3 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 4 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 5 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 6 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 10 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 11 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 12 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 13 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 20 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 21 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 22 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 23 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 24 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 25 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 26 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 27 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 28 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 29 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 31 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 32 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 33 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 34 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 35 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 36 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 37 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 38 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 39 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 40 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 41 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 42 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 43 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 44 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 45 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 46 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 47 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 48 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 49 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 50 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 51 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.
Indicates reserved
parameter 52 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates reserved
parameter 53 that is
reserved for future
requirements.
Note on parameter
replacement:
Reserved
parameters are
temporarily used in
patch versions and NO NO NO None
will be replaced with
new parameters.
For example, the ID
of a new parameter
can signify the
parameter function.
Therefore, avoid
using this
parameter.

Indicates the switch

for RF module
regular time sleep.
Cells are
unavailable after
the eNodeB enters LOFD-001025 /
NO NO NO
RF module regular TDLOFD-001025
time sleep. After the
eNodeB exit RF
module regular time
sleep, it is in the
normal state.
Indicates the time
LOFD-001025 /
for enter RF module NO NO NO
TDLOFD-001025
regular time sleep.

Indicates the time

LOFD-001025 /
for exit RF module NO NO NO
TDLOFD-001025
regular time sleep.
Indicates whether
the eNodeB is RF
module regular time
sleep. If this
parameter is RF
module regular time
NO NO YES None
sleep mode, all
cells are
unavailable. If this
parameter is
normal, the eNodeB
runs normally.

Indicates whether
an adaptive
asynchronization
UE is selected
when the adaptive
asynchronization
function is enabled.
If a UE does not
transmit or receive
data for a period of
time that is longer
than the
AdaptUnsyncTimer
Len parameter NO NO NO None
value, the UE is a
candidate adaptive
asynchronization
UE. When this
parameter value is
larger than or equal
to the
UeInactiveTimer
parameter value,
the adaptive
asynchronization
function does not
take effect.
Indicates the
threshold of the
ratio of uplink-
synchronized UEs
in a cell or a
baseband
processing unit. If
the ratio of uplink-
synchronized UEs
in a cell or a
baseband
processing unit
exceeds this
threshold, the
eNodeB adaptively NO NO NO None
enables some UEs
that do not transmit
or receive data for a
period of time
greater than the
AdaptUnsyncTimer
Len parameter
value to enter the
asynchronization
state. As a result,
PUCCH resources
can be released
and used by other
UEs.
for determining
whether cells are
congested in
intelligent access
control or service-
based dynamic
access control.
If this parameter is
set to
FLOWCONTROL(F
LOWCONTROL),
cell congestion is
determined based
on the flow control
state.
If this parameter is
set to
LOFD-070207 /
CPULOAD(CPULO
TDLOFD-070207
AD), cell congestion NO NO NO
LOFD-008002 /
is determined
TDLOFD-008002
based on the
configured CPU
load threshold. If
the CPU load of a
main control board
or baseband
processing unit
serving the cells is
greater than or
equal to the
configured CPU
load threshold, the
cells are congested.
The CPU load
threshold is
specified by the
CpuLoadThd
Indicates the CPU
load threshold of a
board. If the CPU
load of a main
control board or
baseband
processing unit
serving the cells is
greater than or
equal to this
parameter value, LOFD-070207 /
the cells are TDLOFD-070207
NO NO NO
congested. If the LOFD-008002 /
CPU load is less TDLOFD-008002
than this parameter
value, the cells are
not congested. This
parameter takes
effect only when the
DynAcBarPolicyMo
de parameter is set
to
CPULOAD(CPULO
AD).
 Enumeration
Feature Name Value Type GUI Value Range Unit
Number/Bit

Extended-QCI Interval Type 0~5 N/A None

Extended-QCI Interval Type 10~254 N/A None

Service based inter-

RAT handover to
UTRAN
Interval Type 0~9 N/A None
Service based inter-
RAT handover to
GERAN

Service Based
Inter-frequency Interval Type 0~9 N/A None
Handover

None Interval Type 0~5 N/A None

 EUTRAN_TDD, EUTRAN_TDD~1,
Coverage Based
Enumeration Type EUTRAN_FDD, EUTRAN_FDD~2, None
Inter-frequency
EUTRAN EUTRAN~3

EUTRAN_TDD, EUTRAN_TDD~1,
Coverage Based
Enumeration Type EUTRAN_FDD, EUTRAN_FDD~2, None
Inter-frequency
NULL NULL~4
Coverage Based
Interval Type -100,-20~20 N/A dBm
Inter-frequency
Coverage Based
Inter-frequency Interval Type -100,-20~20 N/A dBm
Handover
PS Inter-RAT
Mobility between E-
Interval Type -100,-20~20 N/A dBm
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
Interval Type -100,-20~20 N/A dBm
UTRAN and
GERAN
SRVCC to UTRAN /
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
SRVCC to UTRAN

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT UTRAN(UTRAN), UTRAN~0,
Mobility between E- GERAN(GERAN), GERAN~1,
Enumeration Type None
UTRAN and CDMA2000(CDMA CDMA2000~2,
GERAN 2000), NULL(NULL) NULL~3
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT UTRAN(UTRAN),
UTRAN~0,
Mobility between E- GERAN(GERAN),
Enumeration Type GERAN~1, None
UTRAN and CDMA2000(CDMA
CDMA2000~2
GERAN 2000)
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
UTRAN and UTRAN(UTRAN), UTRAN~0,
UTRAN GERAN(GERAN), GERAN~1,
Enumeration Type None
PS CDMA2000(CDMA CDMA2000~2,
Inter-RAT Mobility 2000), NULL(NULL) NULL~3
between E-UTRAN
and GERAN

Multi Operators
Interval Type 0~5 N/A None
SPID Policy
Intra-LTE Load
Balancing
Inter-RAT Load
Sharing to UTRAN
Inter-RAT Load
Sharing to GERAN
Flexible User
Interval Type 1~256 N/A None
Steering
Camp & Handover
Based on SPID
UL Pre-allocation
Based on SPID
Multi Operators
SPID Policy

Intra-LTE Load
Balancing
Inter-RAT Load
Sharing to UTRAN NOT_CFG(NOT_C NOT_CFG~0,
Enumeration Type None
Inter-RAT Load FG), CFG(CFG) CFG~1
Sharing to GERAN
Multi Operators
SPID Policy

Intra-LTE Load
Balancing
Inter-RAT Load
Sharing to UTRAN
Inter-RAT Load
Sharing to GERAN
Flexible User
Interval Type 0~255 N/A None
Steering
Camp & Handover
Based on SPID
UL Pre-allocation
Based on SPID
Multi Operators
SPID Policy

None Interval Type 0~5 N/A None

 QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3), QCI1~1, QCI2~2,
QCI4(QCI 4), QCI3~3, QCI4~4,
None Enumeration Type QCI5(QCI 5), QCI5~5, QCI6~6, None
QCI6(QCI 6), QCI7~7, QCI8~8,
QCI7(QCI 7), QCI9~9
QCI8(QCI 8),
QCI9(QCI 9)

Service based inter-

RAT handover to
UTRAN
Interval Type 0~9 N/A None
Service based inter-
RAT handover to
GERAN

Service Based
Inter-frequency Interval Type 0~9 N/A None
Handover
Service Based
Inter-frequency
Handover
Service based inter- SERVICE_HO_QCI
RAT handover to _ALLOWED(QCI SERVICE_HO_QCI
UTRAN Bear Allowed), _ALLOWED~0,
Service based inter- Enumeration Type SERVICE_HO_QCI SERVICE_HO_QCI None
RAT handover to _NOT_ALLOWED( _NOT_ALLOWED~
GERAN QCI Bear Not 1
Service-Request Allowed)
Based Inter-
frequency
Handover
None Interval Type 0~15 N/A None

CS Fallback to
UTRAN
CS Fallback to
GERAN
Flash CS Fallback
to UTRAN
Flash CS Fallback Interval Type 0~5 N/A None
to GERAN
CS Fallback to
CDMA2000 1xRTT
Enhanced CS
Fallback to
CDMA2000 1xRTT
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 UTRAN~0,
UTRAN, GERAN,
Flash CS Fallback Enumeration Type GERAN~1, None
CDMA2000
to UTRAN CDMA2000~2
Flash CS Fallback
to GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN~0,
CDMA2000
UTRAN, GERAN, GERAN~1,
Flash CS Fallback Enumeration Type None
CDMA2000, NULL CDMA2000~2,
to UTRAN
NULL~3
Flash CS Fallback
to GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN~0,
CDMA2000
UTRAN, GERAN, GERAN~1,
Flash CS Fallback Enumeration Type None
CDMA2000, NULL CDMA2000~2,
to UTRAN
NULL~3
Flash CS Fallback
to GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN

CS Fallback to
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
UTRAN

CS Fallback to
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
GERAN
CS Fallback to
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
CS Fallback
Steering to UTRAN UTRAN~0,
UTRAN, GERAN,
CS Fallback Enumeration Type GERAN~1, None
CDMA2000
Steering to GERAN CDMA2000~2
Enhanced CS
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
CS Fallback
UTRAN~0,
Steering to UTRAN
UTRAN, GERAN, GERAN~1,
CS Fallback Enumeration Type None
CDMA2000, NULL CDMA2000~2,
Steering to GERAN
NULL~3
Enhanced CS
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
CS Fallback
UTRAN~0,
Steering to UTRAN
UTRAN, GERAN, GERAN~1,
CS Fallback Enumeration Type None
CDMA2000, NULL CDMA2000~2,
Steering to GERAN
NULL~3
Enhanced CS
Fallback to
CDMA2000 1xRTT

CS Fallback to
UTRAN
Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None
Flash CS Fallback
to UTRAN
CS Fallback to
UTRAN
CS Fallback to
REDIRECTION~0,
GERAN REDIRECTION,
Bit Field Type CCO_HO~1, None
CS Fallback CCO_HO, PS_HO
PS_HO~2
Steering to UTRAN
CS Fallback
Steering to GERAN

CS Fallback
REDIRECTION~0,
Steering to UTRAN REDIRECTION,
Bit Field Type CCO_HO~1, None
CS Fallback CCO_HO, PS_HO
PS_HO~2
Steering to GERAN

Admission Control Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

Admission Control Interval Type 1~15 N/A None

Mobility
String Type 3 characters N/A None
Management

Mobility
String Type 2~3 characters N/A None
Management
Mobility
Interval Type 0~65535 N/A None
Management

None Interval Type 0~5 N/A None

Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
String Type 3 characters N/A None
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
CS Fallback to
UTRAN
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
String Type 2~3 characters N/A None
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
CS Fallback to
UTRAN

Camp & Handover

Interval Type 0~255 N/A None
Based on SPID

Camp & Handover

Based on SPID EUTRAN~0,
Enhanced CS UTRAN~1,
EUTRAN, UTRAN,
Fallback to GERAN~2,
GERAN,
CDMA2000 1xRTT Enumeration Type CDMA20001XRTT~ None
CDMA20001XRTT,
PS Inter-RAT 3,
CDMA2000HRPD
Mobility between E- CDMA2000HRPD~
UTRAN and 4
CDMA2000
Camp & Handover 0~46589,54436~65
Interval Type N/A None
Based on SPID 535

Camp & Handover

Interval Type 0~7 N/A None
Based on SPID

Camp & Handover GSM_dcs1800, GSM_dcs1800~0,

Enumeration Type None
Based on SPID GSM_pcs1900 GSM_pcs1900~1

Service Based
Inter-frequency
Handover
Service-Request Interval Type 0~5 N/A None
Based Inter-
frequency
Handover
Service Based
Inter-frequency
Handover
Service-Request Interval Type 0~9 N/A None
Based Inter-
frequency
Handover

Service Based
Inter-frequency
Handover
Service-Request Interval Type 0~7 N/A None
Based Inter-
frequency
Handover

Service Based
Inter-frequency
Handover
0~46589,54436~65
Service-Request Interval Type N/A None
535
Based Inter-
frequency
Handover
Service Based
Inter-frequency Interval Type 0~7 N/A None
Handover

Service Based
Inter-frequency Interval Type 0~5 N/A None
Handover

Service Based
Inter-frequency Interval Type 0~9 N/A None
Handover
Service Based
NO_HO, NO_HO~0,
Inter-frequency Enumeration Type None
PERMIT_HO PERMIT_HO~1
Handover

Service Based
Inter-frequency
Handover
Service-Request Interval Type 10~20000 N/A ms
Based Inter-
frequency
Handover
 0ms(0ms),
40ms(40ms), 0ms~0, 40ms~1,
64ms(64ms), 64ms~2, 80ms~3,
80ms(80ms), 100ms~4,
100ms(100ms), 128ms~5,
128ms(128ms), 160ms~6,
Service Based 160ms(160ms), 256ms~7,
Inter-frequency 256ms(256ms), 320ms~8,
Enumeration Type ms
Handover 320ms(320ms), 480ms~9,
Service-Request 480ms(480ms), 512ms~10,
512ms(512ms), 640ms~11,
640ms(640ms), 1024ms~12,
1024ms(1024ms), 1280ms~13,
1280ms(1280ms), 2560ms~14,
2560ms(2560ms), 5120ms~15
5120ms(5120ms)

Service based inter-

RAT handover to
UTRAN
Interval Type 0~5 N/A None
Service based inter-
RAT handover to
GERAN
Service based inter-
RAT handover to
UTRAN
Interval Type 0~9 N/A None
Service based inter-
RAT handover to
GERAN

Service based inter-

RAT handover to
NO_HO, NO_HO~0,
UTRAN
Enumeration Type PERMIT_HO, PERMIT_HO~1, None
Service based inter-
MUST_HO MUST_HO~2
RAT handover to
GERAN
Service based inter-
RAT handover to SERVIC_IR_MEAS SERVIC_IR_MEAS
UTRAN _NO_ORDER, _NO_ORDER~0,
Enumeration Type None
Service based inter- SERVICE_IR_MEA SERVICE_IR_MEA
RAT handover to S_ORDER S_ORDER~1
GERAN

Camp & Handover

Based on SPID
Interval Type 1~256 N/A None
UL Pre-allocation
Based on SPID

FALSE(FALSE),
DRX Enumeration Type FALSE~0, TRUE~1 None
TRUE(TRUE)
Camp & Handover NOT_CFG(NOT_C NOT_CFG~0,
Enumeration Type None
Based on SPID FG), CFG(CFG) CFG~1

Camp & Handover

Interval Type 0~255 N/A None
Based on SPID

UL Pre-allocation FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
Based on SPID TRUE(TRUE)

Camp & Handover

Based on SPID FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
Intra-LTE Load TRUE(TRUE)
Balancing
Camp & Handover
Based on SPID
Inter-RAT Load FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
Sharing to UTRAN TRUE(TRUE)
Inter-RAT Load
Sharing to GERAN

Camp & Handover FALSE(FALSE),

Enumeration Type FALSE~0, TRUE~1 None
Based on SPID TRUE(TRUE)

WBB Subscriber
Identification and
Interval Type 1~10 N/A None
Specified QoS
Guarantee
WBB Subscriber
Identification and
Interval Type 1~10 N/A None
Specified QoS
Guarantee

WBB Subscriber
Identification and
Interval Type -20~20 N/A 0.5dB
Specified QoS
Guarantee
WBB Subscriber
Identification and
Interval Type -20~20 N/A dBm
Specified QoS
Guarantee
WBB Subscriber
Identification and
Interval Type -20~20 N/A dBm
Specified QoS
Guarantee
WBB Subscriber
NONE(NONE),
Identification and NONE~0,
Enumeration Type SPECSERUSER(S None
Specified QoS SPECSERUSER~1
PECSERUSER)
Guarantee

Camp & Handover

Based on SPID
UL Pre-allocation
Based on SPID
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
CA for Downlink
2CC From Multiple Interval Type 0~255 N/A None
Carriers
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Inter-eNodeB CA
Based on
Coordinated BBU
FDD+TDD Carrier
Aggregation
Camp & Handover
Based on SPID
UL Pre-allocation
Based on SPID
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
CA for Downlink
2CC From Multiple Interval Type 0~256 N/A None
Carriers
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Inter-eNodeB CA
Based on
Coordinated BBU
FDD+TDD Carrier
Aggregation

Camp & Handover

Based on SPID
UL Pre-allocation
Based on SPID
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
CA for Downlink
2CC From Multiple Interval Type 0~256 N/A None
Carriers
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Inter-eNodeB CA
Based on
Coordinated BBU
FDD+TDD Carrier
Aggregation

Camp Interval Type 1~256 N/A None

Camp Interval Type 1~256 N/A None

Camp String Type 3 characters N/A None

Camp String Type 2~3 characters N/A None

None String Type 3 characters N/A None

None String Type 2~3 characters N/A None

 0~65535,42949672
None Interval Type N/A None
95
SRVCC to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN
CS Fallback with
LAI to UTRAN
CS Fallback PsHoCapCfg(PsHo
Steering to UTRAN CapCfg),
PS Inter-RAT SiByRimCapCfg(Si PsHoCapCfg~0,
Mobility between E- ByRimCapCfg), SiByRimCapCfg~1,
UTRAN and Bit Field Type VoipCapCfg(VoipCa VoipCapCfg~2, None
UTRAN pCfg), UltraFlashCsfbCap
Service based inter- UltraFlashCsfbCap Cfg~3
RAT handover to Cfg(UltraFlashCsfb
UTRAN CapCfg)
Distance based
Inter-RAT handover
to UTRAN
Ultra-Flash CSFB to
GERAN
Ultra-Flash CSFB to
UTRAN

None Interval Type 0~5 N/A None

None Interval Type 1~9 N/A None

 arameter0_bit10), ~6,
RsvdSwPara0_bit1 RsvdSwPara0_bit8
1(ReservedSwitchP ~7,
arameter0_bit11), RsvdSwPara0_bit9
RsvdSwPara0_bit1 ~8,
2(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit12), 0~9,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
3(ReservedSwitchP 1~10,
arameter0_bit13), RsvdSwPara0_bit1
RsvdSwPara0_bit1 2~11,
4(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit14), 3~12,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
5(ReservedSwitchP 4~13,
arameter0_bit15), RsvdSwPara0_bit1
RsvdSwPara0_bit1 5~14,
6(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit16), 6~15,
None Bit Field Type None
RsvdSwPara0_bit1 RsvdSwPara0_bit1
7(ReservedSwitchP 7~16,
arameter0_bit17), RsvdSwPara0_bit1
RsvdSwPara0_bit1 8~17,
8(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit18), 9~18,
RsvdSwPara0_bit1 RsvdSwPara0_bit2
9(ReservedSwitchP 0~19,
arameter0_bit19), RsvdSwPara0_bit2
RsvdSwPara0_bit2 1~20,
0(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit20), 2~21,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
1(ReservedSwitchP 3~22,
arameter0_bit21), RsvdSwPara0_bit2
RsvdSwPara0_bit2 4~23,
2(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit22), 5~24,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
 arameter1_bit10), ~6,
RsvdSwPara1_bit1 RsvdSwPara1_bit8
1(ReservedSwitchP ~7,
arameter1_bit11), RsvdSwPara1_bit9
RsvdSwPara1_bit1 ~8,
2(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit12), 0~9,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
3(ReservedSwitchP 1~10,
arameter1_bit13), RsvdSwPara1_bit1
RsvdSwPara1_bit1 2~11,
4(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit14), 3~12,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
5(ReservedSwitchP 4~13,
arameter1_bit15), RsvdSwPara1_bit1
RsvdSwPara1_bit1 5~14,
6(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit16), 6~15,
None Bit Field Type None
RsvdSwPara1_bit1 RsvdSwPara1_bit1
7(ReservedSwitchP 7~16,
arameter1_bit17), RsvdSwPara1_bit1
RsvdSwPara1_bit1 8~17,
8(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit18), 9~18,
RsvdSwPara1_bit1 RsvdSwPara1_bit2
9(ReservedSwitchP 0~19,
arameter1_bit19), RsvdSwPara1_bit2
RsvdSwPara1_bit2 1~20,
0(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit20), 2~21,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
1(ReservedSwitchP 3~22,
arameter1_bit21), RsvdSwPara1_bit2
RsvdSwPara1_bit2 4~23,
2(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit22), 5~24,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
 arameter2_bit10), ~6,
RsvdSwPara2_bit1 RsvdSwPara2_bit8
1(ReservedSwitchP ~7,
arameter2_bit11), RsvdSwPara2_bit9
RsvdSwPara2_bit1 ~8,
2(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit12), 0~9,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
3(ReservedSwitchP 1~10,
arameter2_bit13), RsvdSwPara2_bit1
RsvdSwPara2_bit1 2~11,
4(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit14), 3~12,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
5(ReservedSwitchP 4~13,
arameter2_bit15), RsvdSwPara2_bit1
RsvdSwPara2_bit1 5~14,
6(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit16), 6~15,
None Bit Field Type None
RsvdSwPara2_bit1 RsvdSwPara2_bit1
7(ReservedSwitchP 7~16,
arameter2_bit17), RsvdSwPara2_bit1
RsvdSwPara2_bit1 8~17,
8(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit18), 9~18,
RsvdSwPara2_bit1 RsvdSwPara2_bit2
9(ReservedSwitchP 0~19,
arameter2_bit19), RsvdSwPara2_bit2
RsvdSwPara2_bit2 1~20,
0(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit20), 2~21,
RsvdSwPara2_bit2 RsvdSwPara2_bit2
1(ReservedSwitchP 3~22,
arameter2_bit21), RsvdSwPara2_bit2
RsvdSwPara2_bit2 4~23,
2(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit22), 5~24,
RsvdSwPara2_bit2 RsvdSwPara2_bit2

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None String Type 1~64 characters N/A None

None Interval Type 1~255 N/A None

None Interval Type 0~1048575 N/A None

None String Type 0~256 characters N/A None

None String Type 0~64 characters N/A None

None String Type 0~128 characters N/A None

None String Type 1~100 characters N/A None

None IP Address Type Valid IP address N/A None

None IP Address Type Valid IP address N/A None

None Interval Type 1~15 N/A None

None Interval Type 0~65535 N/A None

None String Type 1~100 characters N/A None

None Interval Type 5~254 N/A None

None Interval Type 1~4294967295 N/A bit/s

None Interval Type 1~4294967295 N/A bit/s

None Interval Type 1~15 N/A None

DISABLED(DISABL
ED), DISABLED~0,
None Enumeration Type None
ENABLED(ENABLE ENABLED~1
D)

DISABLED(DISABL
ED), DISABLED~0,
None Enumeration Type None
ENABLED(ENABLE ENABLED~1
D)

Out of Band Relay

Interval Type 0~255 N/A None
introduction

Out of Band Relay

Interval Type 32768~65535 N/A None
introduction

Out of Band Relay

Interval Type 0~255 N/A None
introduction
None String Type 0~64 characters N/A None

None String Type 0~64 characters N/A None

EEA0(NULL),
Out of Band Relay EEA0~0, EEA1~1,
Bit Field Type EEA1(SNOW 3G), None
introduction EEA2~2
EEA2(AES)

Out of Band Relay EIA1(SNOW 3G),

Bit Field Type EIA1~0, EIA2~1 None
introduction EIA2(AES)

None Interval Type 1~15 N/A None

None IP Address Type Valid IP address N/A None

None IP Address Type Valid IP address N/A None

None Subnet Mask Type Valid Mask address N/A None

Out of Band Relay

Interval Type 0~65535 N/A None
introduction

Out of Band Relay

IP Address Type Valid IP address N/A None
introduction

None Compound Type None N/A None

Out of Band Relay
IP Address Type Valid IP address N/A None
introduction

Out of Band Relay

IP Address Type Valid IP address N/A None
introduction

None String Type 0~127 characters N/A None

None Enumeration Type Y(Y), N(N) Y~0, N~1 None

None IP Address Type Valid IP address N/A None

None Password Type 1~31 characters N/A None

 NormalReset(Norm
alReset), NormalReset~0,
None Enumeration Type None
PoweroffReset(Pow PoweroffReset~1
eroffReset)

Available(Available)
, Available~0,
None Enumeration Type None
Unavilable(Unavilab Unavilable~1
le)

MainArea(Main
Area),
MainArea~0,
StandbyArea(Stand
None Enumeration Type StandbyArea~1, None
by Area),
DownloadArea~2
DownloadArea(Dow
nload Area)

None String Type 0~63 characters N/A None

None String Type 1~31 characters N/A None

Out of Band Relay

Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
introduction

INVENTORY(INVE
Out of Band Relay INVENTORY~0,
Enumeration Type NTORY), None
introduction LOG~1
LOG(LOG)

Out of Band Relay

Enumeration Type L3(L3), L2(L2) L3~0, L2~1 None
introduction
Out of Band Relay
Interval Type 1~32 N/A None
introduction

Out of Band Relay

Interval Type 1~32 N/A None
introduction

Out of Band Relay

Interval Type 0~3825 N/A s
introduction

Out of Band Relay

Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None
introduction
Out of Band Relay
Interval Type 1~4094 N/A None
introduction

Out of Band Relay

Interval Type 0~7 N/A None
introduction

Out of Band Relay

String Type 0~900 characters N/A None
introduction
Out of Band Relay
String Type 0~128 characters N/A None
introduction

Out of Band Relay

IP Address Type Valid IP address N/A None
introduction

Out of Band Relay

Interval Type 0~65535 N/A None
introduction
Out of Band Relay
IP Address Type Valid IP address N/A None
introduction

Out of Band Relay

IP Address Type Valid IP address N/A None
introduction

Out of Band Relay

Interval Type 0~65535 N/A None
introduction

Out of Band Relay

Interval Type 0~1 N/A None
introduction

Out of Band Relay

Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
introduction

Out of Band Relay

Interval Type 0~65535 N/A None
introduction

Out of Band Relay

Interval Type 0~65535 N/A None
introduction

Out of Band Relay

IP Address Type Valid IP address N/A None
introduction

Out of Band Relay

IP Address Type Valid IP address N/A None
introduction
Out of Band Relay
IP Address Type Valid IP address N/A None
introduction

Out of Band Relay

introduction,WBB Interval Type 0~65535 N/A None
access with solo NE

Out of Band Relay

UE(UE),
introduction,WBB Enumeration Type UE~0, RRN~1 None
RRN(RRN)
access with solo NE

None Password Type 15 characters N/A None

Out of Band Relay
String Type 15 characters N/A None
introduction

Out of Band Relay

Interval Type 0~255 N/A None
introduction

Out of Band Relay

introduction,WBB Password Type 32 characters N/A None
access with solo NE
Out of Band Relay
introduction,WBB String Type 32 characters N/A None
access with solo NE

Out of Band Relay

Interval Type 1~4294967295 N/A bit/s
introduction

Out of Band Relay

Interval Type 1~4294967295 N/A bit/s
introduction

None Interval Type 0~65535 N/A None

Out of Band Relay

String Type 0~79 characters N/A None
introduction
None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None String Type 0~16 characters N/A None

DISABLED(DISABL
ED), DISABLED~0,
None Enumeration Type None
ENABLED(ENABLE ENABLED~1
D)

None Interval Type 0~65535 N/A None

Out of Band Relay
Interval Type 10~254 N/A None
introduction

Out of Band Relay

Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
introduction

Out of Band Relay

Interval Type 0~39 N/A None
introduction
Out of Band Relay PQ(PQ),
Enumeration Type PQ~0, WFQ~1 None
introduction WFQ(WFQ)
Out of Band Relay
Interval Type 1~100 N/A None
introduction

Out of Band Relay

Interval Type 1~100 N/A None
introduction
Out of Band Relay
Interval Type 0~63 N/A None
introduction

Out of Band Relay

Interval Type 0~63 N/A None
introduction

Out of Band Relay

Interval Type 0~10 N/A None
introduction
 L3PQ(L3PQ),
L3PQ~0, L2OM~1,
Out of Band Relay L2OM(L2OM),
Enumeration Type L2HIGH~2, None
introduction L2HIGH(L2HIGH),
L2LOW~3
L2LOW(L2LOW)
 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
128ms, 160ms, 256ms~7,
Automatic
256ms, 320ms, 320ms~8,
Neighbour Relation Enumeration Type ms
480ms, 512ms, 480ms~9,
(ANR)
640ms, 1024ms, 512ms~10,
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15
Automatic
Neighbour Relation Interval Type 0~30 N/A 0.5dB
(ANR)
Automatic
Neighbour Relation Interval Type -30~30 N/A 0.5dB
(ANR)
 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
128ms, 160ms, 256ms~7,
Automatic
256ms, 320ms, 320ms~8,
Neighbour Relation Enumeration Type ms
480ms, 512ms, 480ms~9,
(ANR)
640ms, 1024ms, 512ms~10,
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15
Automatic
Neighbour Relation Interval Type 0~30 N/A 0.5dB
(ANR)
Automatic
Neighbour Relation Interval Type -141~-43 N/A dBm
(ANR)

Integrity Protection Interval Type 0,10~600 N/A s

Integrity Protection Interval Type 0,128~4294967295 N/A None

Integrity Protection Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

NULL(NULL
Algorithm),
Encryption: AES Snow3G(SNOW 3G
NULL~0,
Encryption: SNOW Algorithm),
Enumeration Type Snow3G~1, AES~2, None
3G AES(AES
ZUC~3
Encryption: ZUC Algorithm),
ZUC(ZUC
Algorithm)
 NULL(NULL
Algorithm),
Encryption: AES Snow3G(SNOW 3G
NULL~0,
Encryption: SNOW Algorithm),
Enumeration Type Snow3G~1, AES~2, None
3G AES(AES
ZUC~3
Encryption: ZUC Algorithm),
ZUC(ZUC
Algorithm)

NULL(NULL
Algorithm),
Encryption: AES Snow3G(SNOW 3G
NULL~0,
Encryption: SNOW Algorithm),
Enumeration Type Snow3G~1, AES~2, None
3G AES(AES
ZUC~3
Encryption: ZUC Algorithm),
ZUC(ZUC
Algorithm)

NULL(NULL
Algorithm),
Encryption: AES Snow3G(SNOW 3G
NULL~0,
Encryption: SNOW Algorithm),
Enumeration Type Snow3G~1, AES~2, None
3G AES(AES
ZUC~3
Encryption: ZUC Algorithm),
ZUC(ZUC
Algorithm)
None Interval Type 1~200 N/A s
None Interval Type 1~200 N/A s
None Interval Type 1~200 N/A s

Enhanced CS
Fallback to Interval Type 1~65535 N/A ms
CDMA2000 1xRTT
Enhanced CS
Fallback to Interval Type 1~65535 N/A ms
CDMA2000 1xRTT

Enhanced CS
Fallback to Interval Type 1~65535 N/A ms
CDMA2000 1xRTT

PS Inter-RAT
Mobility between E-
Interval Type 1~65535 N/A ms
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
Interval Type 1~65535 N/A ms
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
Interval Type 1~65535 N/A ms
UTRAN and
CDMA2000
None Interval Type 3~15 N/A s

None Interval Type 1~200 N/A s

None Interval Type 1~200 N/A s

None Interval Type 0~1000 N/A ms

None Interval Type 0~1000 N/A ms

RRC Connection
Interval Type 1~200 N/A s
Management
RRC Connection
Interval Type 1~200 N/A s
Management

RRC Connection
Interval Type 1~200 N/A s
Management
None Interval Type 0~80 N/A 50ms

NULL(NULL
Algorithm),
Snow3G(SNOW 3G
NULL~0,
Algorithm),
Integrity Protection Enumeration Type Snow3G~1, AES~2, None
AES(AES
ZUC~3
Algorithm),
ZUC(ZUC
Algorithm)

NULL(NULL
Algorithm),
Snow3G(SNOW 3G
NULL~0,
Algorithm),
Integrity Protection Enumeration Type Snow3G~1, AES~2, None
AES(AES
ZUC~3
Algorithm),
ZUC(ZUC
Algorithm)

NULL(NULL
Algorithm),
Snow3G(SNOW 3G
NULL~0,
Algorithm),
Integrity Protection Enumeration Type Snow3G~1, AES~2, None
AES(AES
ZUC~3
Algorithm),
ZUC(ZUC
Algorithm)
 Disable(Disable
NULL Algorithm), Disable~0,
Integrity Protection Enumeration Type None
Enable(Enable Enable~1
NULL Algorithm)

None Interval Type 0~99999999 N/A None

None Interval Type 0~99,255 N/A None

None String Type 0~80 characters N/A None

UsBasedSpecificSP
ID(UsBasedSpecific
SPID), UsBasedSpecificSP
UsBasedSpecificIP ID~0,
Add(UsBasedSpeci UsBasedSpecificIP
None Bit Field Type ficIPAdd), Add~1, None
UsBasedSpecificTr UsBasedSpecificTr
aceID(UsBasedSpe aceID~2,
cificTraceID), UsBasedIMEISV~3
UsBasedIMEISV(U
sBasedIMEISV)
None Interval Type 1~256 N/A None

None Interval Type 0~3600 N/A None

None Interval Type 0~3600 N/A None

None Interval Type 1~1000 N/A None

None Interval Type 1~1000 N/A None

None Interval Type 1~1000 N/A None

None Interval Type 0~120 N/A min
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

None Interval Type 0~23 N/A None

None Interval Type 0~4294967295 N/A None

RObust Header
Compression Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
(ROHC)
 U_MODE(Unidirecti
onal Mode),
O_MODE(Bi-
RObust Header U_MODE~1,
directional
Compression Enumeration Type O_MODE~2, None
Optimistic Mode),
(ROHC) R_MODE~3
R_MODE(Bi-
Directional Reliable
Mode)
 Profile0x0001(Profil
e0x0001),
Profile0x0002(Profil Profile0x0001~0,
RObust Header
e0x0002), Profile0x0002~1,
Compression Bit Field Type None
Profile0x0003(Profil Profile0x0003~2,
(ROHC)
e0x0003), Profile0x0004~3
Profile0x0004(Profil
e0x0004)

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~31 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 20~300 N/A MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~31 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 1~256 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 1~256 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~256 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~256 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in Bandwidth_1_4M(1.
20MHz 4M),
Carrier Aggregation Bandwidth_3M(3M), Bandwidth_1_4M~0
for Downlink 2CC in Bandwidth_5M(5M), , Bandwidth_3M~1,
40MHz Bandwidth_10M(10 Bandwidth_5M~2,
Bit Field Type None
Support of UE M), Bandwidth_10M~3,
Category 6 Bandwidth_15M(15 Bandwidth_15M~4,
Flexible CA from M), Bandwidth_20M~5
Multiple Carriers Bandwidth_20M(20
Inter-eNodeB CA M)
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in Bandwidth_1_4M(1.
20MHz 4M),
Carrier Aggregation Bandwidth_3M(3M), Bandwidth_1_4M~0
for Downlink 2CC in Bandwidth_5M(5M), , Bandwidth_3M~1,
40MHz Bandwidth_10M(10 Bandwidth_5M~2,
Bit Field Type None
Support of UE M), Bandwidth_10M~3,
Category 6 Bandwidth_15M(15 Bandwidth_15M~4,
Flexible CA from M), Bandwidth_20M~5
Multiple Carriers Bandwidth_20M(20
Inter-eNodeB CA M)
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in Bandwidth_1_4M(1.
20MHz 4M),
Carrier Aggregation Bandwidth_3M(3M), Bandwidth_1_4M~0
for Downlink 2CC in Bandwidth_5M(5M), , Bandwidth_3M~1,
40MHz Bandwidth_10M(10 Bandwidth_5M~2,
Bit Field Type None
Support of UE M), Bandwidth_10M~3,
Category 6 Bandwidth_15M(15 Bandwidth_15M~4,
Flexible CA from M), Bandwidth_20M~5
Multiple Carriers Bandwidth_20M(20
Inter-eNodeB CA M)
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in Bandwidth_1_4M(1.
20MHz 4M),
Carrier Aggregation Bandwidth_3M(3M), Bandwidth_1_4M~0
for Downlink 2CC in Bandwidth_5M(5M), , Bandwidth_3M~1,
40MHz Bandwidth_10M(10 Bandwidth_5M~2,
Bit Field Type None
Support of UE M), Bandwidth_10M~3,
Category 6 Bandwidth_15M(15 Bandwidth_15M~4,
Flexible CA from M), Bandwidth_20M~5
Multiple Carriers Bandwidth_20M(20
Inter-eNodeB CA M)
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6 Interval Type 0~256 N/A None
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 4CC
and 5CC
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Bandwidth_1_4M(1.
Carrier Aggregation
4M),
for Downlink 2CC in
Bandwidth_3M(3M), Bandwidth_1_4M~0
40MHz
Bandwidth_5M(5M), , Bandwidth_3M~1,
Support of UE
Bandwidth_10M(10 Bandwidth_5M~2,
Category 6 Bit Field Type None
M), Bandwidth_10M~3,
Flexible CA from
Bandwidth_15M(15 Bandwidth_15M~4,
Multiple Carriers
M), Bandwidth_20M~5
Inter-eNodeB CA
Bandwidth_20M(20
based on
M)
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 4CC
and 5CC
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz NOT_CONFILCT(N
Carrier Aggregation ot conflict), NOT_CONFILCT~0
for Downlink 2CC in CONFILCT_WITH_ ,
40MHz PRIVATE(Conflict CONFILCT_WITH_
Enumeration Type None
Support of UE with Private), PRIVATE~1,
Category 6 CONFILCT_WITH_ CONFILCT_WITH_
Flexible CA from 3GPP(Conflict with 3GPP~2
Multiple Carriers 3GPP)
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

RRC Connection
Interval Type 1~16 N/A s
Management
 min5(5), min10(10),
min5~0, min10~1,
min20(20),
min20~2, min30~3,
min30(30),
None Enumeration Type min60~4, min
min60(60),
min120~5,
min120(120),
min180~6
min180(180)

ms50(50),
ms50~0, ms100~1,
ms100(100),
ms150~2,
ms150(150),
ms200~3,
None Enumeration Type ms200(200), ms
ms500~4,
ms500(500),
ms1000~5,
ms1000(1000),
ms2000~6
ms2000(2000)
 ms100(100), ms100~0,
ms200(200), ms200~1,
ms500(500), ms500~2,
None Enumeration Type ms1000(1000), ms1000~3, ms
ms2000(2000), ms2000~4,
ms4000(4000), ms4000~5,
ms8000(8000) ms8000~6

min5(5), min10(10),
min5~0, min10~1,
min20(20),
min20~2, min30~3,
min30(30),
None Enumeration Type min60~4, min
min60(60),
min120~5,
min120(120),
min180~6
min180(180)
RRC Connection
Interval Type 0~3600 N/A s
Management
RRC Connection
Interval Type 0~3600 N/A s
Management

RRC Connection
Interval Type 0~15 N/A s
Management
Dynamic DRX
High-Mobility- Interval Type 10~3600 N/A s
Triggered Idle Mode
Dynamic DRX
High-Mobility- Interval Type 5~3600 N/A s
Triggered Idle Mode
RRC Connection
Interval Type 0~3600 N/A s
Management
RRC Connection
Interval Type 10~3600 N/A s
Management
Radio Bearer
Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None
Management

Radio Bearer
Interval Type 1~49 N/A None
Management
 m50(50ms), m45~8, m50~9,
m55(55ms), m55~10, m60~11,
m60(60ms), m65~12, m70~13,
m65(65ms), m75~14, m80~15,
m70(70ms), m85~16, m90~17,
m75(75ms), m95~18, m100~19,
m80(80ms), m105~20,
m85(85ms), m110~21,
m90(90ms), m115~22,
m95(95ms), m120~23,
m100(100ms), m125~24,
m105(105ms), m130~25,
m110(110ms), m135~26,
m115(115ms), m140~27,
m120(120ms), m145~28,
m125(125ms), m150~29,
m130(130ms), m155~30,
m135(135ms), m160~31,
Radio Bearer
Enumeration Type m140(140ms), m165~32, None
Management
m145(145ms), m170~33,
m150(150ms), m175~34,
m155(155ms), m180~35,
m160(160ms), m185~36,
m165(165ms), m190~37,
m170(170ms), m195~38,
m175(175ms), m200~39,
m180(180ms), m205~40,
m185(185ms), m210~41,
m190(190ms), m215~42,
m195(195ms), m220~43,
m200(200ms), m225~44,
m205(205ms), m230~45,
m210(210ms), m235~46,
m215(215ms), m240~47,
m220(220ms), m245~48,
m225(225ms), m250~49,
m230(230ms), m300~50,
Radio Bearer
Interval Type 0~5000 N/A None
Management

None Interval Type 0~255 N/A None

IPv4(IPv4 Address),
None Enumeration Type IPv4~0, IPv6~1 None
IPv6(IPv6 Address)
None IP Address Type Valid IP address N/A None

None IP Address Type Valid IP address N/A None

ArpPrioritySchSwitc
ArpPrioritySchSwitc
None Bit Field Type h(ArpPrioritySchSwi None
h~0
tch)
 GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3
 GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
None Enumeration Type SILVER(Silver), SILVER~2, None
BRONZE(Bronze) BRONZE~3

QCI6(QCI6),
QCI7(QCI7), QCI6~6, QCI7~7,
None Enumeration Type None
QCI8(QCI8), QCI8~8, QCI9~9
QCI9(QCI9)

None Interval Type 1~1000 N/A None

None Interval Type 1~1000 N/A None

None Interval Type 1~1000 N/A None

None Interval Type 1~1000 N/A None

None Interval Type 1~1000 N/A None

None Interval Type 1~1000 N/A None

Self-configuration String Type 3 characters N/A None

Self-configuration String Type 2~3 characters N/A None

None Interval Type 0~255 N/A None

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type -140~-43 N/A dBm
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type -140~-43 N/A dBm
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~30 N/A kB
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 1~10 N/A kB
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~300 N/A ms
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 10~1000 N/A kbit/s
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
Flexible CA from
Multiple Carriers
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz Interval Type -30~30 N/A 0.5dB
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
Flexible CA from
Multiple Carriers
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz Interval Type 1~65535 N/A min
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
Flexible CA from
Multiple Carriers
Intra-Band Carrier
Aggregation for
r1(1), r2(2), r4(4),
Downlink 2CC in r1~0, r2~1, r4~2,
r8(8), r16(16),
20MHz Enumeration Type r8~3, r16~4, r32~5, None
r32(32), r64(64),
Inter-Band Carrier r64~6, Infinity~7
Infinity(Infinity)
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
120ms~0,
Flexible CA from
240ms~1,
Multiple Carriers
480ms~2,
Intra-Band Carrier
120ms, 240ms, 640ms~3,
Aggregation for
480ms, 640ms, 1024ms~4,
Downlink 2CC in
1024ms, 2048ms, 2048ms~5,
20MHz Enumeration Type None
5120ms, 10240ms, 5120ms~6,
Inter-Band Carrier
1min, 6min, 12min, 10240ms~7,
Aggregation for
30min, 60min 1min~8, 6min~9,
Downlink 2CC in
12min~10,
20MHz
30min~11,
Carrier Aggregation
60min~12
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers Interval Type 0~15 N/A None
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
Flexible CA from
Multiple Carriers
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers Interval Type 5~60 N/A s
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
Flexible CA from
Multiple Carriers
 CaDl3CCSwitch(Ca
Dl3CCSwitch),
CaUl2CCSwitch(Ca
Ul2CCSwitch),
CaDl4CCSwitch(Ca CaDl3CCSwitch~0,
FDD+TDD Carrier
Dl4CCSwitch), CaUl2CCSwitch~1,
Aggregation(LTE
InterFddTddCaSwit CaDl4CCSwitch~2,
TDD)
ch(InterFddTddCaS InterFddTddCaSwit
FDD+TDD Carrier
witch), ch~3,
Aggregation(LTE Bit Field Type None
Tdd2CCDlCaEnhan Tdd2CCDlCaEnhan
FDD)
ceSwitch(Tdd2CCD ceSwitch~4,
Carrier Aggregation
lCaEnhanceSwitch) CaDl5CCSwitch~5,
for Downlink 4CC
, CaInstantlyJudgeS
and 5CC
CaDl5CCSwitch(Ca witch~6
Dl5CCSwitch),
CaInstantlyJudgeS
witch(CaInstantlyJu
dgeSwitch)

Carrier Aggregation
Interval Type 0~2000 N/A ms
for Uplink 2CC
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Carrier Aggregation
for 2CC based on
Coordinated BBU
IP RAN based Inter
Site CA (Carrier
Interval Type 0~65535 N/A Mbps
Aggregation for
2CC based on inter
site)
Carrier Aggregation
for Uplink 2CC
Carrier Aggregation
for Downlink 3CC in
40MHz
Carrier Aggregation
for Downlink 3CC in
60MHz
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Flexible CA from
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
Flexible CA from
Multiple Carriers
NOT_CFG~0,
Intra-Band Carrier
160ms~1,
Aggregation for
NOT_CFG, 160ms, 256ms~2,
Downlink 2CC in
256ms, 320ms, 320ms~3,
20MHz Enumeration Type None
512ms, 640ms, 512ms~4,
Inter-Band Carrier
1024ms, 1280ms 640ms~5,
Aggregation for
1024ms~6,
Downlink 2CC in
1280ms~7
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
IP RAN based Inter
Site CA (Carrier
Interval Type 0~65535 N/A None
Aggregation for
2CC based on inter
site)
Carrier Aggregation
for Uplink 2CC
Carrier Aggregation
for Downlink 3CC in
40MHz
Carrier Aggregation
for Downlink 3CC in
60MHz
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Flexible CA from
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Interval Type 0~100 N/A %
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Uplink 2CC
Inter-eNodeB CA
based on relaxed
backhaul
Carrier Aggregation
for Downlink 3CC in
40MHz
Carrier Aggregation
for Downlink 3CC in
60MHz
Carrier Aggregation
for Downlink 4CC
and 5CC
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Interval Type -140~-43 N/A dBm
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Uplink 2CC
Inter-eNodeB CA
based on relaxed
backhaul
Carrier Aggregation
for Downlink 3CC in
40MHz
Carrier Aggregation
for Downlink 3CC in
60MHz
Carrier Aggregation
for Downlink 4CC
and 5CC
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
NOT_ALLOWED(N
40MHz
ot allowed), NOT_ALLOWED~0
Support of UE Enumeration Type None
ALLOWED(Allowed , ALLOWED~1
Category 6
)
CA for Downlink
2CC From Multiple
Carriers
Carrier Aggregation
for 2CC based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Auto Neighbor
Group Interval Type 1~65535 N/A None
Configuration

Auto Neighbor FREE(FREE),

FREE~0,
Group Enumeration Type CONTROLLED(CO None
CONTROLLED~1
Configuration NTROLLED)
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE Interval Type 0~65535 N/A min
Category 6
CA for Downlink
2CC From Multiple
Carriers
Carrier Aggregation
for 2CC based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Auto Neighbor
Group Interval Type 1~65535 N/A min
Configuration
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~15 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

2CC(2CC),
Inter-eNodeB CA
3CC(3CC), 2CC~0, 3CC~1,
based on relaxed Enumeration Type None
4CC(4CC), 4CC~2, 5CC~3
backhaul
5CC(5CC)

2CC(2CC),
Carrier Aggregation
3CC(3CC), 2CC~0, 3CC~1,
for 2CC based on Enumeration Type None
4CC(4CC), 4CC~2, 5CC~3
Coordinated BBU
5CC(5CC)
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
0ms(0), 40ms(40),
Inter-Band Carrier 0ms~0, 40ms~1,
64ms(64),
Aggregation for 64ms~2, 80ms~3,
80ms(80),
Downlink 2CC in 100ms~4,
100ms(100),
20MHz 128ms~5,
128ms(128),
Carrier Aggregation 160ms~6,
160ms(160),
for Downlink 2CC in 256ms~7,
256ms(256),
40MHz 320ms~8,
Enumeration Type 320ms(320), ms
Support of UE 480ms~9,
480ms(480),
Category 6 512ms~10,
512ms(512),
Flexible CA from 640ms~11,
640ms(640),
Multiple Carriers 1024ms~12,
1024ms(1024),
Inter-eNodeB CA 1280ms~13,
1280ms(1280),
based on 2560ms~14,
2560ms(2560),
Coordinated BBU 5120ms~15
5120ms(5120)
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
0ms(0), 40ms(40),
Inter-Band Carrier 0ms~0, 40ms~1,
64ms(64),
Aggregation for 64ms~2, 80ms~3,
80ms(80),
Downlink 2CC in 100ms~4,
100ms(100),
20MHz 128ms~5,
128ms(128),
Carrier Aggregation 160ms~6,
160ms(160),
for Downlink 2CC in 256ms~7,
256ms(256),
40MHz 320ms~8,
Enumeration Type 320ms(320), ms
Support of UE 480ms~9,
480ms(480),
Category 6 512ms~10,
512ms(512),
Flexible CA from 640ms~11,
640ms(640),
Multiple Carriers 1024ms~12,
1024ms(1024),
Inter-eNodeB CA 1280ms~13,
1280ms(1280),
based on 2560ms~14,
2560ms(2560),
Coordinated BBU 5120ms~15
5120ms(5120)
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
0ms(0), 40ms(40),
Inter-Band Carrier 0ms~0, 40ms~1,
64ms(64),
Aggregation for 64ms~2, 80ms~3,
80ms(80),
Downlink 2CC in 100ms~4,
100ms(100),
20MHz 128ms~5,
128ms(128),
Carrier Aggregation 160ms~6,
160ms(160),
for Downlink 2CC in 256ms~7,
256ms(256),
40MHz 320ms~8,
Enumeration Type 320ms(320), ms
Support of UE 480ms~9,
480ms(480),
Category 6 512ms~10,
512ms(512),
Flexible CA from 640ms~11,
640ms(640),
Multiple Carriers 1024ms~12,
1024ms(1024),
Inter-eNodeB CA 1280ms~13,
1280ms(1280),
based on 2560ms~14,
2560ms(2560),
Coordinated BBU 5120ms~15
5120ms(5120)
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
0ms(0), 40ms(40),
Inter-Band Carrier 0ms~0, 40ms~1,
64ms(64),
Aggregation for 64ms~2, 80ms~3,
80ms(80),
Downlink 2CC in 100ms~4,
100ms(100),
20MHz 128ms~5,
128ms(128),
Carrier Aggregation 160ms~6,
160ms(160),
for Downlink 2CC in 256ms~7,
256ms(256),
40MHz 320ms~8,
Enumeration Type 320ms(320), ms
Support of UE 480ms~9,
480ms(480),
Category 6 512ms~10,
512ms(512),
Flexible CA from 640ms~11,
640ms(640),
Multiple Carriers 1024ms~12,
1024ms(1024),
Inter-eNodeB CA 1280ms~13,
1280ms(1280),
based on 2560ms~14,
2560ms(2560),
Coordinated BBU 5120ms~15
5120ms(5120)
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
CA for Downlink
2CC From Multiple
Carriers
Carrier Aggregation
for 2CC based on
Coordinated BBU Interval Type 0~255 N/A ms
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Uplink 2CC
Inter-eNodeB CA
based on relaxed
backhaul
Carrier Aggregation
for Downlink 3CC in
40MHz
Carrier Aggregation
for Downlink 3CC in
60MHz
Carrier Aggregation
for Downlink 4CC
and 5CC

FDD+TDD Carrier
Aggregation(LTE
FDD) DL0CC(DL0CC), DL0CC~0,
Enumeration Type None
FDD+TDD Carrier DL2CC(DL2CC) DL2CC~1
Aggregation(LTE
TDD)

FDD+TDD Carrier
Aggregation(LTE
2CC(2CC),
FDD) 2CC~0, 3CC~1,
Enumeration Type 3CC(3CC), None
FDD+TDD Carrier 4CC~2
4CC(4CC)
Aggregation(LTE
TDD)
FDD+TDD Carrier
Aggregation(LTE
FDD(FDD),
FDD) FDD~0, TDD~1,
Enumeration Type TDD(TDD), None
FDD+TDD Carrier NULL~2
NULL(NULL)
Aggregation(LTE
TDD)

FDD+TDD Carrier
Aggregation(LTE
FDD(FDD),
FDD) FDD~0, TDD~1,
Enumeration Type TDD(TDD), None
FDD+TDD Carrier NULL~2
NULL(NULL)
Aggregation(LTE
TDD)
None Interval Type 0~255 N/A None

DL 2x2 MIMO
DL 4x2 MIMO
DL 4x4 MIMO
NO_ADAPTIVE(NO
Single
_ADAPTIVE),
Streaming NO_ADAPTIVE~0,
TxD_BF_ADAPTIV
Beamforming TxD_BF_ADAPTIV
E(TxD_BF_ADAPTI
Dual Streaming Enumeration Type E~1, None
VE),
Beamforming MIMO_BF_ADAPTI
MIMO_BF_ADAPTI
DL 4x2 VE~2
VE(MIMO_BF_ADA
MIMO based on
PTIVE)
TM9
DL 8x2 MIMO
based on TM9
DL 2x2 MIMO
DL 4x2 MIMO
DL 4x4 MIMO
Single Streaming TM2(TM2),
Beamforming TM3(TM3),
Dual Streaming TM7(TM7), TM2~0, TM3~1,
Beamforming TM8(TM8), TM7~2, TM8~3,
DL 4x2 MIMO Enumeration Type TM4(TM4), TM4~4, None
based on TM9 TM9w/oPMI(TM9w/ TM9w/oPMI~5,
DL 8x2 MIMO oPMI), TM9wPMI~6
based on TM9 TM9wPMI(TM9wP
DL 4x4 MIMO MI)
based on TM9
DL 8x4 MIMO
based on TM9
DL 2x2 MIMO
DL 4x4 MIMO
Single Streaming
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Beamforming
Dual Streaming
Beamforming
Single Streaming
Beamforming/Dual
Interval Type -337~345 N/A 0.01bit/RE
Streaming
Beamforming
DL 2x2 MIMO
DL 4x4 MIMO
Interval Type -70~50 N/A 0.1bit/RE
Dual streaming
Beamforming
None Interval Type -70~50 N/A 0.1bit/RE
DL 2x2 MIMO
DL 4x4 MIMO
Interval Type -70~50 N/A 0.1bit/RE
Dual streaming
Beamforming
DL 2x2 MIMO
DL 4x4 MIMO
Interval Type -70~50 N/A 0.1bit/RE
Dual streaming
Beamforming
None Interval Type -70~50 N/A 0.1bit/RE
Single Streaming
Beamforming
Interval Type -128~128 N/A 0.1dB
Dual Streaming
Beamforming
Single Streaming
Beamforming
Interval Type -128~128 N/A 0.1dB
Dual Streaming
Beamforming
DL 2x2 MIMO
DL 4x4 MIMO
Enumeration Type 0(0), 1(1), 2(2) 0~0, 1~1, 2~2 None
Dual streaming
Beamforming

DL 2x2 MIMO
DL 4x4 MIMO
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Dual streaming
Beamforming
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
Flexible CA from Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Multiple Carriers
Carrier Aggregation
for Downlink 3CC
TDLAOFD-081406
CA for Downlink
3CC from Multiple
Carriers
Carrier Aggregation
for Uplink 2CC
DL 2x2 MIMO
DL 4x4 MIMO
Single Streaming Interval Type 0~70 N/A 0.1bit/RE
Beamforming
Dual S
DL 2x2 MIMO
DL 4x4 MIMO
Single Streaming
Beamforming
Dual Streaming
Beamforming
DL 4x2 MIMO
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
based on TM9
DL 8x2 MIMO
based on TM9
DL 4x4 MIMO
based on TM9
DL 8x4 MIMO
based on TM9
DL 4x4 MIMO
Single Streaming
Beamforming Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Dual Streaming
Beamforming

DL 2x2 MIMO
DL 2-Layer MIMO
Based on TM9 Interval Type -30~50 N/A 0.1bit/RE
DL 4-Layer MIMO
Based on TM9
MU-Beamforming
(DL 4-Layer) Interval Type -500~500 N/A 0.01bit/RE
MU-Beamforming
MU-Beamforming
Interval Type -500~500 N/A 0.01bit/RE
(DL 4-Layer)
DL 2*2 MIMO
DL 4-Layer MIMO Interval Type -120~120 N/A 0.1bit/RE
Based on TM9
DL 2*2 MIMO
DL 4-Layer MIMO Interval Type -120~120 N/A 0.1bit/RE
Based on TM9

None Interval Type 0~255 N/A None

Basic Scheduling
Dynamic
Scheduling
Single Streaming Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Beamforming
Dual Streaming
Beamforming

ms2(2ms),
ms2~2, ms5~5,
ms5(5ms),
ms10~10,
Basic Scheduling ms10(10ms),
ms20~20,
Dynamic Enumeration Type ms20(20ms), ms
ms40~40,
Scheduling ms40(40ms),
ms80~80,
ms80(80ms),
ms160~160
ms160(160ms)
AMC
CQI Adjustment
Enhanced
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Scheduling
Physical Channel
Management
Basic Scheduling
Dynamic Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Scheduling

None Interval Type 0~255 N/A None

DL CoMP
Introduction
Package
Intra-eNodeB DL
CoMP in DCS Interval Type -30~30 N/A 0.5dB
Mode
Intra-eNodeB DL
CoMP in Adaptive
Mode

None Interval Type 0~255 N/A None

Dynamic Downlink
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Power Allocation
 DB_6_P_A(-6 dB),
DB_4DOT77_P_A(- DB_6_P_A~0,
4.77 dB), DB_4DOT77_P_A~
DB_3_P_A(-3 dB), 1, DB_3_P_A~2,
Dynamic Downlink DB_1DOT77_P_A(- DB_1DOT77_P_A~
Enumeration Type dB
Power Allocation 1.77 dB), 3, DB0_P_A~4,
DB0_P_A(0 dB), DB1_P_A~5,
DB1_P_A(1 dB), DB2_P_A~6,
DB2_P_A(2 dB), DB3_P_A~7
DB3_P_A(3 dB)

None Interval Type 0~255 N/A None

DRX Interval Type 0~1000 N/A per mill
DRX Interval Type 1~1000 N/A per mill
DRX Interval Type 0~1999 N/A per mill

DRX Interval Type 1~2000 N/A per mill

DRX Interval Type 0~1999 N/A per mill

DRX Interval Type 1~2000 N/A per mill

DRX Interval Type 2~300 N/A 20ms

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

None Interval Type 2~300 N/A 20ms

None Interval Type 0~1999 N/A per mill

None Interval Type 0~1999 N/A per mill

 SF10(10
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF10~0, SF20~1,
SF80(80
SF32~2, SF40~3,
subframes),
SF64~4, SF80~5,
SF128(128
SF128~6,
subframes),
SF160~7,
SF160(160
SF256~8,
Dynamic DRX subframes),
Enumeration Type SF320~9, subframe
DRX SF256(256
SF512~10,
subframes),
SF640~11,
SF320(320
SF1024~12,
subframes),
SF1280~13,
SF512(512
SF2048~14,
subframes),
SF2560~15
SF640(640
subframes),
SF1024(1024
subframes),
SF1280(1280
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)
DRX Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
 PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
PSF1~0, PSF2~1,
subframes), PSF8(8
PSF3~2, PSF4~3,
PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF10(10 PDCCH
PSF20~8,
Dynamic DRX subframes),
PSF30~9,
High-Mobility- Enumeration Type PSF20(20 PDCCH subframe
PSF40~10,
Triggered Idle Mode subframes),
PSF50~11,
PSF30(30 PDCCH
PSF60~12,
subframes),
PSF80~13,
PSF40(40 PDCCH
PSF100~14,
subframes),
PSF200~15
PSF50(50 PDCCH
subframes),
PSF60(60 PDCCH
subframes),
PSF80(80 PDCCH
subframes),
PSF100(100
PDCCH
subframes),
PSF200(200
PDCCH subframes)
 PSF200(200
PDCCH
subframes),
PSF300(300
PDCCH
subframes),
PSF500(500
PSF200~0,
PDCCH
PSF300~1,
subframes),
PSF500~2,
PSF750(750
Dynamic DRX Enumeration Type PSF750~3, subframe
PDCCH
PSF1280~4,
subframes),
PSF1920~5,
PSF1280(1280
PSF2560~6
PDCCH
subframes),
PSF1920(1920
PDCCH
subframes),
PSF2560(2560
PDCCH subframes)
 DEFAULT(Default),
QCIPRIORITY(QCI DEFAULT~0,
priority), QCIPRIORITY~1,
DRX Enumeration Type None
3GPPDEFINEDQCI 3GPPDEFINEDQCI
PRIORITY(3GPP PRIORITY~2
Defined Qci priority)
DRX Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
DRX Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Ultra-Flash CS
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Fallback to GERAN
 SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes), SF128~6,
SF320(320 SF160~7,
subframes), SF256~8,
SF512(512 SF320~9,
Ultra-Flash CS subframes), SF512~10,
Enumeration Type subframe
Fallback to GERAN SF640(640 SF640~11,
subframes), SF1024~12,
SF1024(1024 SF1280~13,
subframes), SF2048~14,
SF1280(1280 SF2560~15
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)
 PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
PSF1~0, PSF2~1,
subframes), PSF8(8
PSF3~2, PSF4~3,
PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF10(10 PDCCH
PSF20~8,
subframes),
Ultra-Flash CS PSF30~9,
Enumeration Type PSF20(20 PDCCH subframe
Fallback to GERAN PSF40~10,
subframes),
PSF50~11,
PSF30(30 PDCCH
PSF60~12,
subframes),
PSF80~13,
PSF40(40 PDCCH
PSF100~14,
subframes),
PSF200~15
PSF50(50 PDCCH
subframes),
PSF60(60 PDCCH
subframes),
PSF80(80 PDCCH
subframes),
PSF100(100
PDCCH
subframes),
PSF200(200
PDCCH subframes)
 subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
PSF1~0, PSF2~1,
subframes),
PSF3~2, PSF4~3,
PSF30(30 PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF40(40 PDCCH
PSF20~8,
subframes),
PSF30~9,
PSF50(50 PDCCH
PSF40~10,
subframes),
PSF50~11,
PSF60(60 PDCCH
Ultra-Flash CS PSF60~12,
Enumeration Type subframes), subframe
Fallback to GERAN PSF80~13,
PSF80(80 PDCCH
PSF100~14,
subframes),
PSF200~15,
PSF100(100
PSF300~16,
PDCCH
PSF500~17,
subframes),
PSF750~18,
PSF200(200
PSF1280~19,
PDCCH
PSF1920~20,
subframes),
PSF2560~21
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280
 PSF1(1 PDCCH
subframes), PSF2(2
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF6(6
PSF1~0, PSF2~1,
PDCCH
PSF4~2, PSF6~3,
Ultra-Flash CS subframes), PSF8(8
Enumeration Type PSF8~4, PSF16~5, subframe
Fallback to GERAN PDCCH
PSF24~6,
subframes),
PSF33~7
PSF16(16 PDCCH
subframes),
PSF24(24 PDCCH
subframes),
PSF33(33 PDCCH
subframes)

Ultra-Flash CS
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Fallback to GERAN
 SF2(2 subframes),
SF5(5 subframes),
SF8(8 subframes),
SF10(10
subframes),
SF16(16
subframes),
SF20(20
subframes),
SF32(32 SF2~0, SF5~1,
subframes), SF8~2, SF10~3,
SF40(40 SF16~4, SF20~5,
subframes), SF32~6, SF40~7,
SF64(64 SF64~8, SF80~9,
Ultra-Flash CS
Enumeration Type subframes), SF128~10, subframe
Fallback to GERAN
SF80(80 SF160~11,
subframes), SF256~12,
SF128(128 SF320~13,
subframes), SF512~14,
SF160(160 SF640~15
subframes),
SF256(256
subframes),
SF320(320
subframes),
SF512(512
subframes),
SF640(640
subframes)
Ultra-Flash CS
Interval Type 1~16 N/A None
Fallback to GERAN
DRX
Dynamic DRX Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Smart DRX
DRX
Dynamic DRX Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Smart DRX
SRVCC to GERAN
CS Fallback to
GERAN
Flash CS Fallback
to GERAN
Flash CS Fallback
to GERAN Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Ultra-Flash CS
Fallback to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN
PS Inter-RAT
Mobility between E- Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
UTRAN and
GERAN

None Interval Type 0~255 N/A None

Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT Interval Type -140~-43 N/A dBm
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT Interval Type -40~-6 N/A 0.5dB
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000

Handover
Enhancement at
Speed Mobility
Interval Type 30~350 N/A km/h
Handover
Enhancement at
Speed Mobility
CS Fallback to
UTRAN / CS
Fallback to
BlindHoSwitch(Blin
GERAN / CS Bit Field Type BlindHoSwitch~0 None
dHoSwitch)
Fallback to
UTRAN / CS
Fallback to GERAN

SRVCCWITHPSCS
SRVCC to UTRAN / RETRYSWITCH(Sr SRVCCWITHPSCS
Bit Field Type None
SRVCC to UTRAN vccWithPsCsRetryS RETRYSWITCH~0
witch)
None Interval Type 0~28 N/A None
None Interval Type 0~100 N/A %
 HS_30S(30s), HS_30S~0,
HS_60S(60s), HS_60S~1,
HS_120S(120s), HS_120S~2,
HS_180S(180s), HS_180S~3,
None Enumeration Type HS_240S(240s), HS_240S~4, None
HS_10S(10s), HS_10S~5,
HS_15S(15s), HS_15S~6,
HS_20S(20s), HS_20S~7,
HS_45S(45s) HS_45S~8
None Interval Type 1~16 N/A None
 HANDOVER_IMME
DIATELY(HANDOV
ER_IMMEDIATELY)
, HANDOVER_IMME
BASED_ON_SIGN DIATELY~0,
CS Fallback to AL_STRENGTH(BA BASED_ON_SIGN
Enumeration Type None
UTRAN SED_ON_SIGNAL_ AL_STRENGTH~1,
STRENGTH), BASED_ON_FREQ
BASED_ON_FREQ _PRIORITY~2
_PRIORITY(BASE
D_ON_FREQ_PRI
ORITY)

CS Fallback to
Interval Type 60~1000 N/A ms
UTRAN
 InterFreqCoverHoS InterFreqCoverHoS
witch, witch~0,
EmcInterFreqBlind EmcInterFreqBlind
Coverage Based
HoSwitch, HoSwitch~1,
Inter-frequency Bit Field Type None
InterFreqSpeedHoS InterFreqSpeedHoS
Handover
witch, witch~2,
IfCoverPreBlindHoS IfCoverPreBlindHoS
witch witch~3
None Interval Type 1~16 N/A None

HoUseInactiveTime
HoUseInactiveTime
None Bit Field Type rSwitch(HoUseInact None
rSwitch~0
iveTimerSwitch)
Interference
Coordination in
Interval Type 0~50 N/A None
High-Speed
Railway Scenarios
Handover
Enhancement at
Speed Mobility
Handover Interval Type 1~60 N/A min
Enhancement at
Ultra High Speed
Mobility

None Interval Type 0~255 N/A None

 NO_ADAPTIVE(NO
_ADAPTIVE),
DL 2x2 MIMO OL_ADAPTIVE(OL NO_ADAPTIVE~0,
DL 4x2 MIMO _ADAPTIVE), OL_ADAPTIVE~1,
Enumeration Type None
DL 4X4 MIMO CL_ADAPTIVE(CL_ CL_ADAPTIVE~2,
DL 2x2 MIMO ADAPTIVE), OC_ADAPTIVE~3
OC_ADAPTIVE(OC
_ADAPTIVE)
DL 2x2 MIMO TM2(TM2),
DL 4x2 MIMO TM3(TM3), TM2~0, TM3~1,
Enumeration Type None
DL 4X4 MIMO TM4(TM4), TM4~2, TM6~3
DL 2x2 MIMO TM6(TM6)
DL 2x2 MIMO TM2(TM2),
TM2~0,
DL 4x2 MIMO Enumeration Type ADAPTIVE(ADAPTI None
ADAPTIVE~1
DL 4X4 MIMO VE)

None Interval Type 0~255 N/A None

 RESELBASED(RE
Intra-LTE User RESELBASED~0,
SELPRIOBASED),
Number Load Enumeration Type MLBPRIOBASED~ None
MLBPRIOBASED(
Balancing 1
MLBPRIOBASED)
 PROTECTTIMERM
Intra-LTE Load
ODE(PROTECTTI PROTECTTIMERM
Balancing
MER MODE), ODE~0,
Intra-LTE User Bit Field Type None
SPECEVENTA1A2 SPECEVENTA1A2
Number Load
MODE(SPECEVEN MODE~1
Balancing
TA1A2 MODE)
Intra-LTE Load
Balancing
Intra-LTE User Interval Type 0~3600 N/A s
Number Load
Balancing

Intra-LTE Load
Balancing
Intra-LTE User Interval Type -140~-43 N/A dBm
Number Load
Balancing
Intra-LTE Load
Balancing
Intra-LTE User Interval Type -40~-6 N/A 0.5dB
Number Load
Balancing

Intra-LTE Load
Balancing
Intra-LTE User Interval Type -140~-43 N/A dBm
Number Load
Balancing
Intra-LTE Load
Balancing
Intra-LTE User Interval Type -40~-6 N/A 0.5dB
Number Load
Balancing

UtranRedirectIMMC
Inter-RAT Load UtranRedirectIMMC
Bit Field Type I(UtranRedirectIMM None
Sharing to UTRAN I~0
CI)
Intra-LTE Load
Balancing
Intra-LTE User
Number Load
Balancing
HoAdmitSwitch(Ho
Service Based
AdmitSwitch), HoAdmitSwitch~0,
Inter-frequency
Bit Field Type X2RoHoAdmitSwitc X2RoHoAdmitSwitc None
Handover
h(X2RoHoAdmitSwi h~1
Service-Request
tch)
Based Inter-
frequency
Handover
eMBMS Service
Continuity

None Interval Type 0~255 N/A None

None Interval Type 0~5 N/A None

CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN UTRAN~0,
UTRAN, GERAN,
PS Inter-RAT Enumeration Type GERAN~1, None
CDMA2000
Mobility between E- CDMA2000~2
UTRAN and
CDMA2000
Flash CS Fallback
to UTRAN
Flash CS Fallback
to GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT
Ultra-Flash CSFB to
UTRAN
Ultra-Flash CSFB to
GERAN

CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN~0,
GERAN
UTRAN, GERAN, GERAN~1,
PS Inter-RAT Enumeration Type None
CDMA2000, NULL CDMA2000~2,
Mobility between E-
NULL~3
UTRAN and
CDMA2000
Flash CS Fallback
to UTRAN
Flash CS Fallback
to GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT
Ultra-Flash CSFB to
UTRAN
Ultra-Flash CSFB to
GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN~0,
GERAN
UTRAN, GERAN, GERAN~1,
PS Inter-RAT Enumeration Type None
CDMA2000, NULL CDMA2000~2,
Mobility between E-
NULL~3
UTRAN and
CDMA2000
Flash CS Fallback
to UTRAN
Flash CS Fallback
to GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT
Ultra-Flash CSFB to
UTRAN
Ultra-Flash CSFB to
GERAN

CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
Flash CS Fallback
to UTRAN UTRAN~0,
UTRAN, GERAN,
Flash CS Fallback Enumeration Type GERAN~1, None
CDMA2000
to GERAN CDMA2000~2
Enhanced CS
Fallback to
CDMA2000 1xRTT
Ultra-Flash CSFB to
UTRAN
Ultra-Flash CSFB to
GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
Flash CS Fallback
UTRAN~0,
to UTRAN
UTRAN, GERAN, GERAN~1,
Flash CS Fallback Enumeration Type None
CDMA2000, NULL CDMA2000~2,
to GERAN
NULL~3
Enhanced CS
Fallback to
CDMA2000 1xRTT
Ultra-Flash CSFB to
UTRAN
Ultra-Flash CSFB to
GERAN

CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
Flash CS Fallback
UTRAN~0,
to UTRAN
UTRAN, GERAN, GERAN~1,
Flash CS Fallback Enumeration Type None
CDMA2000, NULL CDMA2000~2,
to GERAN
NULL~3
Enhanced CS
Fallback to
CDMA2000 1xRTT
Ultra-Flash CSFB to
UTRAN
Ultra-Flash CSFB to
GERAN
None Interval Type 0~255 N/A None

None Interval Type 0~9 N/A None

Dynamic
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Scheduling
Dynamic
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Scheduling

Dynamic
Interval Type 1~40 N/A ms
Scheduling
Dynamic
Interval Type 45~1500 N/A byte
Scheduling

Dynamic
Interval Type 0~2000 N/A ms
Scheduling

None Interval Type 0~255 N/A None

Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management

ms5(5ms),
ms10(10ms),
ms5~1, ms10~2,
ms20(20ms),
Physical Channel ms20~3, ms40~4,
Enumeration Type ms40(40ms), ms
Management ms80~5, ms160~6,
ms80(80ms),
ms320~7
ms160(160ms),
ms320(320ms)

None Interval Type 0~255 N/A None

Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
Service based
Inter-RAT handover
Interval Type 1~32 N/A None
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
CS Fallback to
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN
Service based inter-
RAT handover to
GERAN
Distance based
inter-RAT handover
to GERAN
CS Fallback to
GERAN
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Interval Type 1~8 N/A None
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Interval Type 1~8 N/A None
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
Service based
Inter-RAT handover Interval Type 1~16 N/A None
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
CS Fallback to
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
Service based
Inter-RAT handover Interval Type 1~16 N/A None
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
CS Fallback to
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN
Service based inter-
RAT handover to Interval Type 1~64 N/A None
GERAN
Distance based
inter-RAT handover
to GERAN
CS Fallback to
GERAN

None Interval Type 0~255 N/A None

Intra-eNodeB UL
Interval Type -30~30 N/A 0.5dB
CoMP

SFN
Adaptive Interval Type -15~15 N/A dB
SFN/SDMA
UL CoMP based on
Interval Type -30~30 N/A 0.5dB
relaxed backhaul

None Interval Type 0~255 N/A None

UU_DISABLE(Disa
Uplink Power ble), UU_DISABLE~0,
Enumeration Type None
Control UU_ENABLE(Enabl UU_ENABLE~1
e)
 -105,-90,-75,-60,-
Uplink Power 45,-30,-
Interval Type N/A 0.1dB
Control 15,0,15,30,45,60,75
,90,105,120

-30,-20,-
Uplink Power 10,0,10,20,30,40,50
Interval Type N/A 0.1dB
Control ,60,70,80,90,100,11
0,120
 COEFF(UU_FC1_F
ILTER_COEFF),
UU_FC2_FILTER_
COEFF(UU_FC2_F
UU_FC0_FILTER_
ILTER_COEFF),
COEFF~0,
UU_FC3_FILTER_
UU_FC1_FILTER_
COEFF(UU_FC3_F
COEFF~1,
ILTER_COEFF),
UU_FC2_FILTER_
UU_FC4_FILTER_
COEFF~2,
COEFF(UU_FC4_F
UU_FC3_FILTER_
ILTER_COEFF),
COEFF~3,
UU_FC5_FILTER_
UU_FC4_FILTER_
COEFF(UU_FC5_F
COEFF~4,
ILTER_COEFF),
UU_FC5_FILTER_
UU_FC6_FILTER_
COEFF~5,
COEFF(UU_FC6_F
UU_FC6_FILTER_
ILTER_COEFF),
COEFF~6,
UU_FC7_FILTER_
Uplink Power UU_FC7_FILTER_
Enumeration Type COEFF(UU_FC7_F None
Control COEFF~7,
ILTER_COEFF),
UU_FC8_FILTER_
UU_FC8_FILTER_
COEFF~8,
COEFF(UU_FC8_F
UU_FC9_FILTER_
ILTER_COEFF),
COEFF~9,
UU_FC9_FILTER_
UU_FC11_FILTER_
COEFF(UU_FC9_F
COEFF~10,
ILTER_COEFF),
UU_FC13_FILTER_
UU_FC11_FILTER_
COEFF~11,
COEFF(UU_FC11_
UU_FC15_FILTER_
FILTER_COEFF),
COEFF~12,
UU_FC13_FILTER_
UU_FC17_FILTER_
COEFF(UU_FC13_
COEFF~13,
FILTER_COEFF),
UU_FC19_FILTER_
UU_FC15_FILTER_
COEFF~14
COEFF(UU_FC15_
FILTER_COEFF),
UU_FC17_FILTER_
COEFF(UU_FC17_

None Interval Type 0~255 N/A None

Distance based
Inter-RAT handover
to UTRAN
Distance based EUTRAN~0,
EUTRAN, GERAN,
Inter-RAT handover Bit Field Type GERAN~1, None
UTRAN
to GERAN UTRAN~2
Distance Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Distance based
Inter-RAT handover Interval Type 1~1000 N/A 100m
to UTRAN
Distance based
Inter-RAT handover
to GERAN

None Interval Type 0~255 N/A None

DRX Interval Type 0~9 N/A None

DRX Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
 PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
PSF1~0, PSF2~1,
subframes), PSF8(8
PSF3~2, PSF4~3,
PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF10(10 PDCCH
PSF20~8,
subframes),
PSF30~9,
DRX Enumeration Type PSF20(20 PDCCH subframe
PSF40~10,
subframes),
PSF50~11,
PSF30(30 PDCCH
PSF60~12,
subframes),
PSF80~13,
PSF40(40 PDCCH
PSF100~14,
subframes),
PSF200~15
PSF50(50 PDCCH
subframes),
PSF60(60 PDCCH
subframes),
PSF80(80 PDCCH
subframes),
PSF100(100
PDCCH
subframes),
PSF200(200
PDCCH subframes)
 subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
PSF1~0, PSF2~1,
subframes),
PSF3~2, PSF4~3,
PSF30(30 PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF40(40 PDCCH
PSF20~8,
subframes),
PSF30~9,
PSF50(50 PDCCH
PSF40~10,
subframes),
PSF50~11,
PSF60(60 PDCCH
PSF60~12,
DRX Enumeration Type subframes), subframe
PSF80~13,
PSF80(80 PDCCH
PSF100~14,
subframes),
PSF200~15,
PSF100(100
PSF300~16,
PDCCH
PSF500~17,
subframes),
PSF750~18,
PSF200(200
PSF1280~19,
PDCCH
PSF1920~20,
subframes),
PSF2560~21
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280
 PSF1(1 PDCCH
subframes), PSF2(2
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF6(6
PSF1~0, PSF2~1,
PDCCH
PSF4~2, PSF6~3,
subframes), PSF8(8
DRX Enumeration Type PSF8~4, PSF16~5, subframe
PDCCH
PSF24~6,
subframes),
PSF33~7
PSF16(16 PDCCH
subframes),
PSF24(24 PDCCH
subframes),
PSF33(33 PDCCH
subframes)
 SF10(10
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF10~0, SF20~1,
SF80(80
SF32~2, SF40~3,
subframes),
SF64~4, SF80~5,
SF128(128
SF128~6,
subframes),
SF160~7,
SF160(160
SF256~8,
subframes),
DRX Enumeration Type SF320~9, subframe
SF256(256
SF512~10,
subframes),
SF640~11,
SF320(320
SF1024~12,
subframes),
SF1280~13,
SF512(512
SF2048~14,
subframes),
SF2560~15
SF640(640
subframes),
SF1024(1024
subframes),
SF1280(1280
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)

UU_DISABLE(Disa
ble), UU_DISABLE~0,
DRX Enumeration Type None
UU_ENABLE(Enabl UU_ENABLE~1
e)
 SF2(2 subframes),
SF5(5 subframes),
SF8(8 subframes),
SF10(10
subframes),
SF16(16
subframes),
SF20(20
subframes),
SF32(32 SF2~0, SF5~1,
subframes), SF8~2, SF10~3,
SF40(40 SF16~4, SF20~5,
subframes), SF32~6, SF40~7,
SF64(64 SF64~8, SF80~9,
DRX Enumeration Type subframes), SF128~10, subframe
SF80(80 SF160~11,
subframes), SF256~12,
SF128(128 SF320~13,
subframes), SF512~14,
SF160(160 SF640~15
subframes),
SF256(256
subframes),
SF320(320
subframes),
SF512(512
subframes),
SF640(640
subframes)
DRX Interval Type 1~16 N/A None

None Interval Type 0~255 N/A None

GSM and LTE
Bufferzone Interval Type 0~1023 N/A None
Optimization

GSM and LTE

GSM_dcs1800, GSM_dcs1800~0,
Bufferzone Enumeration Type None
GSM_pcs1900 GSM_pcs1900~1
Optimization

None Interval Type 0~255 N/A None

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type 0~9 N/A None
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type 0~30 N/A 0.5dB
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
PS Inter-RAT 0ms~0, 40ms~1,
Mobility between E- 64ms~2, 80ms~3,
UTRAN and 100ms~4,
UTRAN 0ms, 40ms, 64ms, 128ms~5,
PS Inter-RAT 80ms, 100ms, 160ms~6,
Mobility between E- 128ms, 160ms, 256ms~7,
UTRAN and 256ms, 320ms, 320ms~8,
Enumeration Type ms
GERAN 480ms, 512ms, 480ms~9,
PS Inter-RAT 640ms, 1024ms, 512ms~10,
Mobility between E- 1280ms, 2560ms, 640ms~11,
UTRAN and 5120ms 1024ms~12,
CDMA2000 1280ms~13,
SRVCC to UTRAN 2560ms~14,
SRVCC to GERAN 5120ms~15

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type -140~-43 N/A dBm
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type -40~-6 N/A 0.5dB
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type -140~-43 N/A dBm
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type -40~-6 N/A 0.5dB
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
PS Inter-RAT
Mobility between E-
Interval Type -140~-43 N/A dBm
UTRAN and
GERAN

PS Inter-RAT
Mobility between E-
Interval Type -40~-6 N/A 0.5dB
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
Interval Type -140~-43 N/A dBm
UTRAN and
UTRAN

PS Inter-RAT
Mobility between E-
Interval Type -40~-6 N/A 0.5dB
UTRAN and
UTRAN
None Interval Type 0~255 N/A None

None Interval Type 0~9 N/A None

Enhanced CS
Fallback to Interval Type 0~30 N/A 0.5dB
CDMA2000 1xRTT

None Interval Type -63~0 N/A 0.5dB

 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
128ms, 160ms, 256ms~7,
Enhanced CS
256ms, 320ms, 320ms~8,
Fallback to Enumeration Type None
480ms, 512ms, 480ms~9,
CDMA2000 1xRTT
640ms, 1024ms, 512ms~10,
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15

PS Inter-RAT
Mobility between E-
Interval Type -63~0 N/A 0.5dB
UTRAN and
CDMA2000
None Interval Type 0~255 N/A None

RRC Connection
Interval Type 0~9 N/A None
Management

MS100_T301(100m
s),
MS200_T301(200m
s),
MS300_T301(300m MS100_T301~0,
s), MS200_T301~1,
MS400_T301(400m MS300_T301~2,
RRC Connection s), MS400_T301~3,
Enumeration Type ms
Management MS600_T301(600m MS600_T301~4,
s), MS1000_T301~5,
MS1000_T301(100 MS1500_T301~6,
0ms), MS2000_T301~7
MS1500_T301(150
0ms),
MS2000_T301(200
0ms)
 MS0_T310(0ms),
MS50_T310(50ms),
MS100_T310(100m
MS0_T310~0,
s),
MS50_T310~1,
MS200_T310(200m
MS100_T310~2,
RRC Connection s),
Enumeration Type MS200_T310~3, ms
Management MS500_T310(500m
MS500_T310~4,
s),
MS1000_T310~5,
MS1000_T310(100
MS2000_T310~6
0ms),
MS2000_T310(200
0ms)

MS1000_T311(100
0ms),
MS3000_T311(300
0ms),
MS1000_T311~0,
MS5000_T311(500
MS3000_T311~1,
0ms),
MS5000_T311~2,
RRC Connection MS10000_T311(10
Enumeration Type MS10000_T311~3, ms
Management 000ms),
MS15000_T311~4,
MS15000_T311(15
MS20000_T311~5,
000ms),
MS30000_T311~6
MS20000_T311(20
000ms),
MS30000_T311(30
000ms)

n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,

RRC Connection
Enumeration Type n4(4), n6(6), n8(8), n4~3, n6~4, n8~5, None
Management
n10(10), n20(20) n10~6, n20~7
 n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,
RRC Connection
Enumeration Type n4(4), n5(5), n6(6), n4~3, n5~4, n6~5, None
Management
n8(8), n10(10) n8~6, n10~7

Extended-QCI Interval Type 10~254 N/A None

None Interval Type 0~255 N/A None

Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency Interval Type 0~9 N/A None
Handover
Service Based
Inter-frequency
Handover

CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Interval Type 0~9 N/A None
Mobility between E-
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
Interval Type 0~9 N/A None
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
Interval Type 0~9 N/A None
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
Interval Type 0~9 N/A None
UTRAN and
GERAN

PS Inter-RAT
Mobility between E-
Interval Type 0~9 N/A None
UTRAN and
UTRAN

Coverage Based
Intra-frequency Interval Type 0~9 N/A None
Handover
DRX Interval Type 0~9 N/A None

RRC Connection NOT_CFG(NOT_C NOT_CFG~0,

Enumeration Type None
Management FG), CFG(CFG) CFG~1

RRC Connection
Interval Type 0~9 N/A None
Management

Radio Bearer
Interval Type 0~65000 N/A ms
Management
None Interval Type 0~255 N/A None

QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3), QCI1~1, QCI2~2,
Basic Scheduling QCI4(QCI 4), QCI3~3, QCI4~4,
Dynamic Enumeration Type QCI5(QCI 5), QCI5~5, QCI6~6, None
Scheduling QCI6(QCI 6), QCI7~7, QCI8~8,
QCI7(QCI 7), QCI9~9
QCI8(QCI 8),
QCI9(QCI 9)

Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency Interval Type 0~9 N/A None
Handover
Service Based
Inter-frequency
Handover
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Interval Type 0~9 N/A None
Mobility between E-
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
Interval Type 0~9 N/A None
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type 0~9 N/A None
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~9 N/A None
GERAN
SRVCC to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~9 N/A None
UTRAN
SRVCC to UTRAN

Coverage Based
Intra-frequency Interval Type 0~9 N/A None
Handover

DRX Interval Type 0~9 N/A None

ms5(SRI 5ms),
ms10(SRI 10ms), ms5~0, ms10~1,
Physical Channel
Enumeration Type ms20(SRI 20ms), ms20~2, ms40~3, None
Management
ms40(SRI 40ms), ms80~4
ms80(SRI 80ms)

RRC Connection NOT_CFG(NOT_C NOT_CFG~0,

Enumeration Type None
Management FG), CFG(CFG) CFG~1

RRC Connection
Interval Type 0~9 N/A None
Management
Radio Bearer
Interval Type 0~65000 N/A ms
Management

Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Interval Type 1~9 N/A None
Service Based
Inter-frequency
Handover
Distance based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to GERAN
Intra-LTE Load
Interval Type 0~9,255 N/A None
Balancing

Dynamic
Interval Type 0~9,255 N/A None
Scheduling

DRX Interval Type 1~9 N/A None

 INTER_FREQ_MLB
_ALLOWED(INTER
_FREQ_MLB_ALL
Operator Load
OWED),
Based Intra-LTE
INTER_FREQ_MLB INTER_FREQ_MLB
MLB
_LOW_PRIO_IND(I _ALLOWED~0,
Load Balancing
NTER_FREQ_MLB INTER_FREQ_MLB
based on Transport
_LOW_PRIO_IND), _LOW_PRIO_IND~
QoS
INTER_RAT_MLB_ 1,
Intra-LTE Load
ALLOWED(INTER_ INTER_RAT_MLB_
Balancing Bit Field Type None
RAT_MLB_ALLOW ALLOWED~2,
Intra-LTE User
ED), INTER_RAT_MLB_
Number Load
INTER_RAT_MLB_ LOW_PRIO_IND~3
Balancing
LOW_PRIO_IND(IN ,
Inter-RAT Load
TER_RAT_MLB_L HO_USE_VOIP_FR
Sharing to UTRAN
OW_PRIO_IND), EQ_ALLOWED~4
Inter-RAT Load
HO_USE_VOIP_FR
Sharing to GERAN
EQ_ALLOWED(HO
_USE_VOIP_FREQ
_ALLOWED)

Intra-LTE Load
Balancing
Intra-LTE User
Number Load
Balancing
Load Balancing Interval Type 0~9 N/A None
based on Transport
QoS
Operator Load
Based Intra-LTE
MLB

Inter-RAT Load
Interval Type 0~9 N/A None
Sharing to UTRAN
Inter-RAT Load
Interval Type 0~9 N/A None
Sharing to GERAN

None Interval Type 0~255 N/A None

PS Inter-RAT
Mobility between E-
Interval Type 0~9 N/A None
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
Interval Type 0~30 N/A 0.5dB
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
Interval Type -63~0 N/A 0.5dB
UTRAN and
CDMA2000
 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
PS Inter-RAT 128ms, 160ms, 256ms~7,
Mobility between E- 256ms, 320ms, 320ms~8,
Enumeration Type ms
UTRAN and 480ms, 512ms, 480ms~9,
CDMA2000 640ms, 1024ms, 512ms~10,
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15

CS Fallback to
Interval Type -63~0 N/A 0.5dB
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
Interval Type -140~-43 N/A dBm
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
Interval Type -40~-6 N/A 0.5dB
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
Interval Type -140~-43 N/A dBm
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
Interval Type -40~-6 N/A 0.5dB
UTRAN and
CDMA2000

None Interval Type 0~255 N/A None

Operator Load
Based Intra-LTE
MLB
Load Balancing
based on Transport
0~46589,54436~65
QoS Interval Type N/A None
535
Intra-LTE Load
Balancing
Intra-LTE User
Number Load
Balancing

Operator Load
Based Intra-LTE
MLB
Load Balancing
based on Transport
QoS Interval Type 0~9 N/A None
Intra-LTE Load
Balancing
Intra-LTE User
Number Load
Balancing

Operator Load
Based Intra-LTE
MLB
Load Balancing
based on Transport
MlbTargetInd(MlbTa
QoS Bit Field Type MlbTargetInd~0 None
rgetInd)
Intra-LTE Load
Balancing
Intra-LTE User
Number Load
Balancing
None Interval Type 0~255 N/A None

Inter-RAT Load
Interval Type 0~31 N/A None
Sharing to GERAN

Inter-RAT Load
Interval Type 0~9 N/A None
Sharing to GERAN
Inter-RAT Load MlbTargetInd(MlbTa
Bit Field Type MlbTargetInd~0 None
Sharing to GERAN rgetInd)

None Interval Type 0~255 N/A None

Inter-RAT Load
Interval Type 0~16383 N/A None
Sharing to UTRAN
Inter-RAT Load
Interval Type 0~9 N/A None
Sharing to UTRAN

Inter-RAT Load MlbTargetInd(MlbTa

Bit Field Type MlbTargetInd~0 None
Sharing to UTRAN rgetInd)

None Interval Type 0~255 N/A None

PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~9 N/A None
GERAN
SRVCC to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~30 N/A 0.5dB
GERAN
SRVCC to GERAN
PS Inter-RAT
Mobility between E-
Interval Type -110~-48 N/A dBm
UTRAN and
GERAN

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
PS Inter-RAT
128ms, 160ms, 256ms~7,
Mobility between E-
256ms, 320ms, 320ms~8,
UTRAN and Enumeration Type ms
480ms, 512ms, 480ms~9,
GERAN
640ms, 1024ms, 512ms~10,
SRVCC to GERAN
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15
Service based inter-
RAT handover to Interval Type -110~-48 N/A dBm
GERAN

None Interval Type 0~255 N/A None

PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~9 N/A None
UTRAN
SRVCC to UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and Interval Type -48~0 N/A 0.5dB
UTRAN
SRVCC to UTRAN

PS Inter-RAT
Mobility between E-
UTRAN and Interval Type -120~-25 N/A dBm
UTRAN
SRVCC to UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~30 N/A 0.5dB
UTRAN
SRVCC to UTRAN
 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
PS Inter-RAT
128ms, 160ms, 256ms~7,
Mobility between E-
256ms, 320ms, 320ms~8,
UTRAN and Enumeration Type ms
480ms, 512ms, 480ms~9,
UTRAN
640ms, 1024ms, 512ms~10,
SRVCC to UTRAN
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15
Service based inter-
RAT handover to
Interval Type -48~0 N/A 0.5dB
UTRAN
SRVCC to UTRAN

Service based inter-

RAT handover to
Interval Type -120~-25 N/A dBm
UTRAN
SRVCC to UTRAN
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~255 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~1048575 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~255 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
Support of UE TRUE(TRUE)
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~7 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type -35~62 N/A dBm
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type -31~66 N/A dBm
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Camp & Handover

Based on SPID
UL Pre-allocation
Based on SPID
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
CA for Downlink
2CC From Multiple Interval Type 0~255,65535 N/A None
Carriers
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Inter-eNodeB CA
Based on
Coordinated BBU
FDD+TDD Carrier
Aggregation
None Interval Type 0~255 N/A None

None Interval Type -30~30 N/A 0.5dB

None Interval Type 0~30 N/A 0.5dB

 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
128ms, 160ms, 256ms~7,
256ms, 320ms, 320ms~8,
None Enumeration Type ms
480ms, 512ms, 480ms~9,
640ms, 1024ms, 512ms~10,
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15

None Interval Type 1~8 N/A None

 r1(1), r2(2), r4(4),
r1~0, r2~1, r4~2,
r8(8), r16(16),
None Enumeration Type r8~3, r16~4, r32~5, None
r32(32), r64(64),
r64~6, Infinity~7
Infinity(Infinity)

120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3,
480ms, 640ms, 1024ms~4,
1024ms, 2048ms, 2048ms~5,
None Enumeration Type None
5120ms, 10240ms, 5120ms~6,
1min, 6min, 12min, 10240ms~7,
30min, 60min 1min~8, 6min~9,
12min~10,
30min~11,
60min~12
 SAME_AS_TRIG_
SAME_AS_TRIG_
None Enumeration Type QUAN(Same as None
QUAN~0, BOTH~1
Trig Quan), BOTH

None Enumeration Type RSRP, RSRQ RSRP~0, RSRQ~1 None

None Interval Type -30~30 N/A 0.5dB

None Interval Type 1~8 N/A None

 RSRP(RSRP),
None Enumeration Type RSRP~0, RSRQ~1 None
RSRQ(RSRQ)
 SAME_AS_TRIG_
QUAN(Same as SAME_AS_TRIG_
None Enumeration Type None
Trig Quan), QUAN~0, BOTH~1
BOTH(Both)
None Interval Type 1~8 N/A None

RSRP(RSRP),
None Enumeration Type RSRP~0, RSRQ~1 None
RSRQ(RSRQ)
 SAME_AS_TRIG_
QUAN(Same as SAME_AS_TRIG_
None Enumeration Type None
Trig Quan), QUAN~0, BOTH~1
BOTH(Both)
Intra-eNodeB UL
CoMP
Intra-eNodeB UL
CoMP Phase II UlCoMPA3RptInterv UlCoMPA3RptInterv
Bit Field Type None
UL CoMP based on alAdapt alAdapt~0
Coordinated BBU
UL CoMP based on
relaxed backhaul

None Interval Type 0~255 N/A None

None Interval Type 0~9 N/A None

Coverage Based
Inter-frequency Interval Type 0~30 N/A 0.5dB
Handover
 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
128ms, 160ms, 256ms~7,
Coverage Based
256ms, 320ms, 320ms~8,
Inter-frequency Enumeration Type ms
480ms, 512ms, 480ms~9,
Handover
640ms, 1024ms, 512ms~10,
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15

Coverage Based
Inter-frequency Interval Type -140~-43 N/A dBm
Handover
Coverage Based
Inter-frequency Interval Type -40~-6 N/A 0.5dB
Handover

Coverage Based
Inter-frequency Interval Type -140~-43 N/A dBm
Handover
Coverage Based
Inter-frequency Interval Type -40~-6 N/A 0.5dB
Handover

Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency Interval Type 0~30 N/A 0.5dB
Handover
Service Based
Inter-frequency
Handover
Coverage Based
Inter-frequency
Handover
Interval Type -140~-43 N/A dBm
Distance Based
Inter-frequency
Handover

Coverage Based
Inter-frequency
Handover
Interval Type -40~-6 N/A 0.5dB
Distance Based
Inter-frequency
Handover
 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
Coverage Based
0ms, 40ms, 64ms, 128ms~5,
Inter-frequency
80ms, 100ms, 160ms~6,
Handover
128ms, 160ms, 256ms~7,
Distance Based
256ms, 320ms, 320ms~8,
Inter-frequency Enumeration Type ms
480ms, 512ms, 480ms~9,
Handover
640ms, 1024ms, 512ms~10,
Service Based
1280ms, 2560ms, 640ms~11,
Inter-frequency
5120ms 1024ms~12,
Handover
1280ms~13,
2560ms~14,
5120ms~15

Service Based
Inter-frequency Interval Type -140~-43 N/A dBm
Handover
Service Based
Inter-frequency Interval Type -40~-6 N/A 0.5dB
Handover

None Interval Type -140~-43 N/A dBm

None Interval Type -40~-6 N/A 0.5dB

Coverage Based
Inter-frequency Interval Type -30~30 N/A 0.5dB
Handover

Coverage Based
Inter-frequency Interval Type -140~-43 N/A dBm
Handover
Coverage Based
Inter-frequency Interval Type -140~-43 N/A dBm
Handover

None Interval Type -140~-43 N/A dBm

None Interval Type -40~-6 N/A 0.5dB

Enhanced Intra-LTE
Interval Type -141~-43 N/A dBm
Load Balancing

Coverage Based
Inter-frequency Interval Type -140~-43 N/A dBm
Handover
Coverage Based
Inter-frequency Interval Type -40~-6 N/A 0.5dB
Handover

Service-Request
Based Inter-
Interval Type -140~-43 N/A dBm
frequency
Handover
Service-Request
Based Inter-
Interval Type -40~-6 N/A 0.5dB
frequency
Handover
Intra-LTE Load
Balancing
Intra-LTE User
Number Load
Interval Type -140~-43 N/A dBm
Balancing
Operator Load
Based Intra-LTE
MLB
Intra-LTE Load
Balancing
Intra-LTE User
Number Load
Interval Type -40~-6 N/A 0.5dB
Balancing
Operator Load
Based Intra-LTE
MLB
None Interval Type -20~20 N/A None

Coverage Based
Inter-frequency Interval Type -40~-6 N/A 0.5dB
Handover
Coverage Based
Inter-frequency Interval Type -40~-6 N/A 0.5dB
Handover

Uplink Traffic-based
Interval Type -140~-43 N/A dBm
MLB to LTE FDD

Uplink Traffic-based
Interval Type -40~-6 N/A 0.5dB
MLB to LTE FDD
None Interval Type 0~255 N/A None

None Interval Type 0~9 N/A None

Coverage Based
Intra-frequency Interval Type 0~30 N/A 0.5dB
Handover
Coverage Based
Intra-frequency Interval Type -30~30 N/A 0.5dB
Handover

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
128ms, 160ms, 256ms~7,
Coverage Based
256ms, 320ms, 320ms~8,
Intra-frequency Enumeration Type ms
480ms, 512ms, 480ms~9,
Handover
640ms, 1024ms, 512ms~10,
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15
None Interval Type 0~255 N/A None

None Interval Type 1~9 N/A None

arameter0_bit10), ~6,
RsvdSwPara0_bit1 RsvdSwPara0_bit8
1(ReservedSwitchP ~7,
arameter0_bit11), RsvdSwPara0_bit9
RsvdSwPara0_bit1 ~8,
2(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit12), 0~9,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
3(ReservedSwitchP 1~10,
arameter0_bit13), RsvdSwPara0_bit1
RsvdSwPara0_bit1 2~11,
4(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit14), 3~12,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
5(ReservedSwitchP 4~13,
arameter0_bit15), RsvdSwPara0_bit1
RsvdSwPara0_bit1 5~14,
6(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit16), 6~15,
None Bit Field Type None
RsvdSwPara0_bit1 RsvdSwPara0_bit1
7(ReservedSwitchP 7~16,
arameter0_bit17), RsvdSwPara0_bit1
RsvdSwPara0_bit1 8~17,
8(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit18), 9~18,
RsvdSwPara0_bit1 RsvdSwPara0_bit2
9(ReservedSwitchP 0~19,
arameter0_bit19), RsvdSwPara0_bit2
RsvdSwPara0_bit2 1~20,
0(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit20), 2~21,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
1(ReservedSwitchP 3~22,
arameter0_bit21), RsvdSwPara0_bit2
RsvdSwPara0_bit2 4~23,
2(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit22), 5~24,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
 arameter1_bit10), ~6,
RsvdSwPara1_bit1 RsvdSwPara1_bit8
1(ReservedSwitchP ~7,
arameter1_bit11), RsvdSwPara1_bit9
RsvdSwPara1_bit1 ~8,
2(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit12), 0~9,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
3(ReservedSwitchP 1~10,
arameter1_bit13), RsvdSwPara1_bit1
RsvdSwPara1_bit1 2~11,
4(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit14), 3~12,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
5(ReservedSwitchP 4~13,
arameter1_bit15), RsvdSwPara1_bit1
RsvdSwPara1_bit1 5~14,
6(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit16), 6~15,
None Bit Field Type None
RsvdSwPara1_bit1 RsvdSwPara1_bit1
7(ReservedSwitchP 7~16,
arameter1_bit17), RsvdSwPara1_bit1
RsvdSwPara1_bit1 8~17,
8(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit18), 9~18,
RsvdSwPara1_bit1 RsvdSwPara1_bit2
9(ReservedSwitchP 0~19,
arameter1_bit19), RsvdSwPara1_bit2
RsvdSwPara1_bit2 1~20,
0(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit20), 2~21,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
1(ReservedSwitchP 3~22,
arameter1_bit21), RsvdSwPara1_bit2
RsvdSwPara1_bit2 4~23,
2(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit22), 5~24,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
 arameter2_bit10), ~6,
RsvdSwPara2_bit1 RsvdSwPara2_bit8
1(ReservedSwitchP ~7,
arameter2_bit11), RsvdSwPara2_bit9
RsvdSwPara2_bit1 ~8,
2(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit12), 0~9,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
3(ReservedSwitchP 1~10,
arameter2_bit13), RsvdSwPara2_bit1
RsvdSwPara2_bit1 2~11,
4(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit14), 3~12,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
5(ReservedSwitchP 4~13,
arameter2_bit15), RsvdSwPara2_bit1
RsvdSwPara2_bit1 5~14,
6(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit16), 6~15,
None Bit Field Type None
RsvdSwPara2_bit1 RsvdSwPara2_bit1
7(ReservedSwitchP 7~16,
arameter2_bit17), RsvdSwPara2_bit1
RsvdSwPara2_bit1 8~17,
8(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit18), 9~18,
RsvdSwPara2_bit1 RsvdSwPara2_bit2
9(ReservedSwitchP 0~19,
arameter2_bit19), RsvdSwPara2_bit2
RsvdSwPara2_bit2 1~20,
0(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit20), 2~21,
RsvdSwPara2_bit2 RsvdSwPara2_bit2
1(ReservedSwitchP 3~22,
arameter2_bit21), RsvdSwPara2_bit2
RsvdSwPara2_bit2 4~23,
2(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit22), 5~24,
RsvdSwPara2_bit2 RsvdSwPara2_bit2

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier
RAN Sharing by
More Operators Interval Type 0~5 N/A None
MOCN Flexible
Priority Based
Camping
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
RAN Sharing with
Dedicated Carrier
RAN Sharing by
More Operators String Type 1~32 characters N/A None
MOCN Flexible
Priority Based
Camping
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
RAN Sharing with
CNOPERATOR_PR
Dedicated Carrier
IMARY(Primary CNOPERATOR_PR
RAN Sharing by
Operator), IMARY~0,
More Operators Enumeration Type None
CNOPERATOR_SE CNOPERATOR_SE
MOCN Flexible
CONDARY(Second CONDARY~1
Priority Based
ary Operator)
Camping
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
RAN Sharing with
Dedicated Carrier
RAN Sharing by
More Operators String Type 3 characters N/A None
MOCN Flexible
Priority Based
Camping
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
RAN Sharing with
Dedicated Carrier
RAN Sharing by
More Operators String Type 2~3 characters N/A None
MOCN Flexible
Priority Based
Camping
Hybrid RAN
Sharing

None Interval Type 0~65535 N/A None

RAN Sharing with

Common Carrier
Interval Type 0~5 N/A None
RAN Sharing with
Dedicated Carrier
RAN Sharing with
Common Carrier
RAN Sharing with
Interval Type 0~65535 N/A None
Dedicated Carrier
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
RAN Sharing with
Interval Type 0~5 N/A None
Dedicated Carrier
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
RAN Sharing with
Interval Type 1~65533,65535 N/A None
Dedicated Carrier
Hybrid RAN
Sharing

Hybrid RAN
Interval Type 0~5 N/A None
Sharing
Hybrid RAN
Interval Type 0~5 N/A None
Sharing

Hybrid RAN SecondaryOpIdTyp

0~5 N/A None
Sharing e[]

Hybrid RAN
Interval Type 0~5 N/A None
Sharing

RAN Sharing with

Common Carrier
Interval Type 0~5 N/A None
RAN Sharing with
Dedicated Carrier
Emergency Call Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Emergency Call Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Emergency Call Interval Type 1~15 N/A None
Emergency Call Interval Type 1~15 N/A None
 ALL_OUTPUT(All
Output),
ABNORMAL_NOR ALL_OUTPUT~0,
MAL_SAMPLE(Abn ABNORMAL_NOR
ormal Normal MAL_SAMPLE~1,
None Enumeration Type None
Sample), ABNORMAL_ALL_
ABNORMAL_ALL_ NORMAL_SAMPLE
NORMAL_SAMPLE ~2
(Abnormal All
Normal Sample)
None Interval Type 0~100 N/A %
None Interval Type 0~65535 N/A None

FIXED_TIME(Fixed
FIXED_TIME~0,
Time),
None Enumeration Type NON_FIXED_TIME None
NON_FIXED_TIME
~1
(Non-Fixed Time)
 INDEPENDENT(Ind
ependent Operator
Mode),
SHARED_FREQ(S
RAN Sharing with INDEPENDENT~0,
hared Frequency
Common Carrier SHARED_FREQ~1,
Sharing Mode),
RAN Sharing with SEPARATED_FRE
Enumeration Type SEPARATED_FRE None
Dedicated Carrier Q~2,
Q(Separate
Hybrid RAN HYBRID_SHARED
Frequency Sharing
Sharing ~3
Mode),
HYBRID_SHARED(
Hybrid RAN
Sharing)

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

X2_OVER_OSS(X2
SonLink is set up
over OSS), X2_OVER_OSS~0,
None Enumeration Type None
X2_OVER_S1(X2S X2_OVER_S1~1
onLink is set up
over S1)

Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
 LCG_PROFILE_0~
0,
Basic Scheduling LCG_PROFILE_0,
LCG_PROFILE_1~
Dynamic Enumeration Type LCG_PROFILE_1, None
1,
Scheduling LCG_PROFILE_2
LCG_PROFILE_2~
2

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

RRC Connection
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management

Automatic
Neighbour Relation Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
(ANR)

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

 SELECTED_PLMNI
SELECTED_PLMNI
D~1,
None Enumeration Type D, None
PRIMARY_PLMNID
PRIMARY_PLMNID
~2

NULL~0,
NULL, BASED_ON_RIM~
None Enumeration Type BASED_ON_RIM, 1, None
BASED_ON_ECO BASED_ON_ECO~
2
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
None Interval Type 0~6000 N/A None
Automatic
Neighbour Relation Interval Type 0~50400 N/A min
(ANR)

PrivateCoding, PrivateCoding~0,
None Enumeration Type None
StandardCoding StandardCoding~1
PS Inter-RAT
Mobility between E-
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
UTRAN and
UTRAN
S1-Flex Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

Mobility
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
 RrcSetupOptSwitch
~0,
RrcSetupOptSwitch
IucsRrcRecfgMcCo
,
mbSwitch~1,
IucsRrcRecfgMcCo
RcrpRrcRecfgMcCo
mbSwitch,
mbSwitch~2,
RcrpRrcRecfgMcCo
RrcRecfgMcOptSwi
mbSwitch,
tch~3,
RrcRecfgMcOptSwi
IdleCsfbRedirectOp
tch,
SRVCC to UTRAN tSwitch~4,
IdleCsfbRedirectOp
SRVCC to GERAN UlNasBufferSwitch~
tSwitch,
Ultra-Flash CSFB to 5,
UlNasBufferSwitch,
GERAN IratMeasCfgTransS
IratMeasCfgTransS
Flash CS Fallback witch~6,
Bit Field Type witch, None
to GERAN GeranAnrMcOptSwi
GeranAnrMcOptSwi
PS Inter-RAT tch~7,
tch,
Mobility between E- InactDiscardSwitch
InactDiscardSwitch,
UTRAN and ~8,
SRVCCHoBasedUe
GERAN SRVCCHoBasedUe
CapSwitch,
CapSwitch~9,
L2GPLMNChooseO
L2GPLMNChooseO
ptSwitch,
ptSwitch~10,
HoInRrcRecfgMcCo
HoInRrcRecfgMcCo
mbSwitch,
mbSwitch~11,
UeCapEnquiryCom
UeCapEnquiryCom
bSwitch,
bSwitch~12,
UeTraceOptSwitch
UeTraceOptSwitch~
13
Automatic
Neighbour Relation Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
(ANR)

ACTIVE_CELL(Acti
ACTIVE_CELL~0,
ve Cell),
None Enumeration Type CONFIGURED_CE None
CONFIGURED_CE
LL~1
LL(Configured Cell)
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

r1(1), r2(2), r3(3), r1~0, r2~1, r3~2,

RRC Connection
Enumeration Type r4(4), r5(5), r4~3, r5~4, None
Management
Infinity(Infinity) Infinity~5
RRC Connection
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management

RRC Connection
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
 v32(v32), v64(v64),
v32~0, v64~1,
Paging Enumeration Type v128(v128), None
v128~2, v256~3
v256(v256)

Uplink Power
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Control
RIM Based LTE
Target Cell
Selection
RimUtranSwitch(Ri
Intelligent WiFi
mUtranSwitch), RimUtranSwitch~0,
Detection and Bit Field Type None
EcoSwitch(EcoSwit EcoSwitch~1
Selection-LTE FDD
ch)
Intelligent WiFi
Detection and
Selection-LTE TDD
 SupportS1UeCapM
SupportS1UeCapM
None Bit Field Type atchMsg(SupportS1 None
atchMsg~0
UeCapMatchMsg)
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

 MMESELECTALGO
SWITCHFORGUUE
(MMESELECTALG
MMESELECTALGO
OSWITCHFORGU
SWITCHFORGUUE
UE),
~0,
GUMMEITYPESWI
S1-Flex Bit Field Type GUMMEITYPESWI None
TCH(GUMMEITYP
TCH~1,
ESWITCH),
NNSFENHANCEM
NNSFENHANCEM
ENTSWITCH~2
ENTSWITCH(NNS
FENHANCEMENT
SWITCH)

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz CaGapMeasPriOffS
CaGapMeasPriOffS
Inter-Band Carrier witch~0,
witch,
Aggregation for CaHoReqWithR9Co
CaHoReqWithR9Co
Downlink 2CC in nfigSwitch~1,
nfigSwitch,
20MHz NasSecProcSwitch
NasSecProcSwitch,
Carrier Aggregation ~2,
AntennaFullConfigS
for Downlink 2CC in AntennaFullConfigS
witch,
40MHz witch~3,
DrxConfigMsgSwitc
Support of UE DrxConfigMsgSwitc
Bit Field Type h, None
Category 6 h~4,
MultiplexingTabSel
Flexible CA from MultiplexingTabSel
Switch,
Multiple Carriers Switch~5,
SCellModCaMeasR
Inter-eNodeB CA SCellModCaMeasR
mvSwitch,
based on mvSwitch~6,
HoCfgReleaseJudg
Coordinated BBU HoCfgReleaseJudg
eSwitch,
Intra-band Carrier eSwitch~7,
ScellIndexLimitSwit
Aggregation for ScellIndexLimitSwit
ch
Downlink 2CC in ch~8
30MHz
(Physical Channel
Management)
 BASED_TNL(Base
d on TNL), BASED_TNL~0,
None Enumeration Type BASED_X2INTERF BASED_X2INTERF None
ACE(Based on X2 ACE~1
Interface)
 BASED_ON_X2FA
ULT(Based on X2
Fault),
BASED_ON_X2FA
BASED_ON_X2US
ULT~0,
AGE_WITH_NEGO
BASED_ON_X2US
Automatic (Based on X2
AGE_WITH_NEGO
Neighbour Relation Bit Field Type Usage with None
~1,
(ANR) Negotiation),
BASED_ON_X2US
BASED_ON_X2US
AGE_WITHOUT_N
AGE_WITHOUT_N
EGO~2
EGO(Based on X2
Usage Without
Negotiation)
Automatic
Neighbour Relation Interval Type 1~50400 N/A min
(ANR)
Automatic
Neighbour Relation Interval Type 1~50400 N/A min
(ANR)
Automatic
Neighbour Relation Interval Type 0~10000 N/A None
(ANR)
Automatic
Neighbour Relation Interval Type 0~10000 N/A None
(ANR)
Automatic
Neighbour Relation
(ANR)
Inter-RAT ANR
PCI Collision DISABLE(Disable), DISABLE~0,
Enumeration Type None
Detection & Self- ENABLE(Enable) ENABLE~1
Optimization
GSM and LTE
Buffer Zone
Optimization(LTE)

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

 MAX_SYNC_USER
_1200(MAX_SYNC
_USER_1200),
MAX_SYNC_USER
MAX_SYNC_USER
_1200~0,
_1800(MAX_SYNC
MAX_SYNC_USER
_USER_1800),
_1800~1,
MAX_SYNC_USER
MAX_SYNC_USER
None Enumeration Type _2400(MAX_SYNC None
_2400~2,
_USER_2400),
MAX_SYNC_USER
MAX_SYNC_USER
_3000~3,
_3000(MAX_SYNC
MAX_SYNC_USER
_USER_3000),
_3600~4
MAX_SYNC_USER
_3600(MAX_SYNC
_USER_3600)
 TIMETOWAIT_NOT
CARRY(TIMETOW
AIT_NOTCARRY),
TIMETOWAIT_NOT
TIMETOWAIT_1s(T
CARRY~0,
IMETOWAIT_1s),
TIMETOWAIT_1s~
TIMETOWAIT_2s(T
1,
IMETOWAIT_2s),
TIMETOWAIT_2s~
TIMETOWAIT_5s(T
2,
IMETOWAIT_5s),
TIMETOWAIT_5s~
TIMETOWAIT_10s(
3,
None Enumeration Type TIMETOWAIT_10s) None
TIMETOWAIT_10s
,
~4,
TIMETOWAIT_20s(
TIMETOWAIT_20s
TIMETOWAIT_20s)
~5,
,
TIMETOWAIT_60s
TIMETOWAIT_60s(
~6,
TIMETOWAIT_60s)
TIMETOWAIT_DEF
,
AULT~7
TIMETOWAIT_DEF
AULT(TIMETOWAI
T_DEFAULT)
None Interval Type 0~2000 N/A None
None Interval Type 5~50400 N/A min
 BASED_ON_EX2F
BASED_ON_EX2F
None Bit Field Type AULT(Based on None
AULT~0
EX2 Fault)

None Interval Type 60~50400 N/A min

 ALL_FREE_MODE(
ALL_FREE_MODE
All free mode),
~0,
HUAWEI_FREE_O
Self-configuration Enumeration Type HUAWEI_FREE_O None
THER_CONTROLL
THER_CONTROLL
ED(HW free other
ED~1
controlled)
Self-configuration Interval Type 1~10000 N/A None
Self-configuration Interval Type 1~50400 N/A min
Security
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Mechanism
 FreqAddCtrl(FreqA
None Bit Field Type FreqAddCtrl~0 None
ddCtrl)

Auto(Auto),
Auto~0,
Self-configuration Enumeration Type Customized(Custo None
Customized~1
mized)
RRC Connection
Interval Type 0~100 N/A None
Management
 ADD_NCELL_CFG
_SW(ADD_NCELL_
CFG_SW), ADD_NCELL_CFG
MOD_NCELL_CFG _SW~0,
_SW(MOD_NCELL MOD_NCELL_CFG
Automatic
_CFG_SW), _SW~1,
Neighbour Relation Bit Field Type None
DEL_NCELL_CFG_ DEL_NCELL_CFG_
(ANR)
SW(DEL_NCELL_C SW~2,
FG_SW), ADD_FREQ_CFG_
ADD_FREQ_CFG_ SW~3
SW(ADD_FREQ_C
FG_SW)
 HoDataSendCtrlSwi
HoDataSendCtrlSwi
None Bit Field Type tch(HoDataSendCtrl None
tch~0
Switch)
 PCI_CONFUSION_
REEST_SWITCH
( PCI_CONFUSION PCI_CONFUSION_
_REEST_SWITCH) REEST_SWITCH
None Bit Field Type , ~0, None
S1_HANDOVER_R S1_HANDOVER_R
EEST_SWITCH(S1 EEST_SWITCH~1
_HANDOVER_REE
ST_SWITCH)

S1MMESonSetupS
witch(S1MMESonS S1MMESonSetupS
etupSwitch), witch~0,
Self-configuration Bit Field Type None
S1MMESonDeleteS S1MMESonDeleteS
witch(S1MMESonD witch~1
eleteSwitch)
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

Radio Bearer
Management
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Radio Bearer
Management
 AbnormalUeHandle
Switch(AbnormalUe
HandleSwitch), AbnormalUeHandle
UltraFlashCsfbCom Switch~0,
OptSw(UltraFlashC UltraFlashCsfbCom
None Bit Field Type None
sfbComOptSw), OptSw~1,
ForbidR8R9UeAcce ForbidR8R9UeAcce
ssB41Sw(ForbidR8 ssB41Sw~2
R9UeAccessB41Sw
)
 UeTypeRecogSwitc
Terminal Awareness UeTypeRecogSwitc
Bit Field Type h(UeTypeRecogSwi None
Differentiation h~0
tch)
 HUAWEI_S1_SCT
P_ABORT_SMOOT
H_SW(Huawei S1 HUAWEI_S1_SCT
SCTP Abort P_ABORT_SMOOT
Smooth Sw), H_SW~0,
S1-flex Bit Field Type None
OTHER_S1_SCTP OTHER_S1_SCTP
_ABORT_SMOOTH _ABORT_SMOOTH
_SW(Other S1 _SW~1
SCTP Abort
Smooth Sw)
 MAX_USER_1200( MAX_USER_1200~
MAX_USER_1200), 0,
None Enumeration Type None
MAX_USER_1800( MAX_USER_1800~
MAX_USER_1800) 1
CSFB to UTRAN UTRAN_CSFB_FR
Flash CSFB to EQ_CHOOSE_OPT UTRAN_CSFB_FR
UTRAN Bit Field Type _SW(UTRAN CSFB EQ_CHOOSE_OPT None
Ultra-Flash CSFB to Freq Choose Opt _SW~0
UTRAN Sw)

LoCation
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Services(LCS)
 RrcConnPunishStat
RrcConnPunishStat
None Bit Field Type Switch(RrcConnPu None
Switch~0
nishStatSwitch)

RAN Sharing with

Common Carrier
RAN Sharing with
Interval Type 0~5 N/A None
Dedicated Carrier
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
RAN Sharing with
Interval Type 1~100 N/A %
Dedicated Carrier
Hybrid RAN
Sharing

Fair User Sharing

License
Management
RAN Sharing with
Common Carrier Interval Type 0~100 N/A %
RAN Sharing with
Dedicated Carrier
Hybrid RAN
Sharing

None Interval Type 0~255 N/A None

eMBMS Phase 1
based on
Interval Type 1~58 N/A 10240ms
Centralized MCE
Architecture

MBMS_RSVD_CEL
MBMS_RSVD_CEL
L(ReservedCell),
L~0,
None Enumeration Type MBMS_NON_RSV None
MBMS_NON_RSV
D_CELL(NoneRese
D_CELL~1
rvedCell)

None Interval Type 0~255 N/A None

eMBMS Phase 1
SessionForMultiMA
based on SessionForMultiMA
Bit Field Type Switch(Session For None
Centralized MCE Switch~0
Multi MA Switch)
Architecture

Intra-LTE Load
Interval Type 0~9 N/A None
Balancing

Intra-LTE Load
Interval Type 0~50000 N/A kbit/s
Balancing

Intra-LTE Load
Interval Type 0~50000 N/A kbit/s
Balancing
Self-configuration Interval Type 0~31 N/A None

Self-configuration Interval Type 0~5 N/A None

Self-configuration String Type 1~127 characters N/A None

None Interval Type 1~300 N/A s

None Interval Type 1~300 N/A s

None Interval Type 0~5 N/A None

 arameter0_bit10), ~6,
RsvdSwPara0_bit1 RsvdSwPara0_bit8
1(ReservedSwitchP ~7,
arameter0_bit11), RsvdSwPara0_bit9
RsvdSwPara0_bit1 ~8,
2(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit12), 0~9,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
3(ReservedSwitchP 1~10,
arameter0_bit13), RsvdSwPara0_bit1
RsvdSwPara0_bit1 2~11,
4(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit14), 3~12,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
5(ReservedSwitchP 4~13,
arameter0_bit15), RsvdSwPara0_bit1
RsvdSwPara0_bit1 5~14,
6(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit16), 6~15,
None Bit Field Type None
RsvdSwPara0_bit1 RsvdSwPara0_bit1
7(ReservedSwitchP 7~16,
arameter0_bit17), RsvdSwPara0_bit1
RsvdSwPara0_bit1 8~17,
8(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit18), 9~18,
RsvdSwPara0_bit1 RsvdSwPara0_bit2
9(ReservedSwitchP 0~19,
arameter0_bit19), RsvdSwPara0_bit2
RsvdSwPara0_bit2 1~20,
0(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit20), 2~21,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
1(ReservedSwitchP 3~22,
arameter0_bit21), RsvdSwPara0_bit2
RsvdSwPara0_bit2 4~23,
2(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit22), 5~24,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
 arameter1_bit10), ~6,
RsvdSwPara1_bit1 RsvdSwPara1_bit8
1(ReservedSwitchP ~7,
arameter1_bit11), RsvdSwPara1_bit9
RsvdSwPara1_bit1 ~8,
2(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit12), 0~9,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
3(ReservedSwitchP 1~10,
arameter1_bit13), RsvdSwPara1_bit1
RsvdSwPara1_bit1 2~11,
4(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit14), 3~12,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
5(ReservedSwitchP 4~13,
arameter1_bit15), RsvdSwPara1_bit1
RsvdSwPara1_bit1 5~14,
6(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit16), 6~15,
None Bit Field Type None
RsvdSwPara1_bit1 RsvdSwPara1_bit1
7(ReservedSwitchP 7~16,
arameter1_bit17), RsvdSwPara1_bit1
RsvdSwPara1_bit1 8~17,
8(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit18), 9~18,
RsvdSwPara1_bit1 RsvdSwPara1_bit2
9(ReservedSwitchP 0~19,
arameter1_bit19), RsvdSwPara1_bit2
RsvdSwPara1_bit2 1~20,
0(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit20), 2~21,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
1(ReservedSwitchP 3~22,
arameter1_bit21), RsvdSwPara1_bit2
RsvdSwPara1_bit2 4~23,
2(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit22), 5~24,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
 arameter2_bit10), ~6,
RsvdSwPara2_bit1 RsvdSwPara2_bit8
1(ReservedSwitchP ~7,
arameter2_bit11), RsvdSwPara2_bit9
RsvdSwPara2_bit1 ~8,
2(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit12), 0~9,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
3(ReservedSwitchP 1~10,
arameter2_bit13), RsvdSwPara2_bit1
RsvdSwPara2_bit1 2~11,
4(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit14), 3~12,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
5(ReservedSwitchP 4~13,
arameter2_bit15), RsvdSwPara2_bit1
RsvdSwPara2_bit1 5~14,
6(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit16), 6~15,
None Bit Field Type None
RsvdSwPara2_bit1 RsvdSwPara2_bit1
7(ReservedSwitchP 7~16,
arameter2_bit17), RsvdSwPara2_bit1
RsvdSwPara2_bit1 8~17,
8(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit18), 9~18,
RsvdSwPara2_bit1 RsvdSwPara2_bit2
9(ReservedSwitchP 0~19,
arameter2_bit19), RsvdSwPara2_bit2
RsvdSwPara2_bit2 1~20,
0(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit20), 2~21,
RsvdSwPara2_bit2 RsvdSwPara2_bit2
1(ReservedSwitchP 3~22,
arameter2_bit21), RsvdSwPara2_bit2
RsvdSwPara2_bit2 4~23,
2(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit22), 5~24,
RsvdSwPara2_bit2 RsvdSwPara2_bit2

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~19 N/A None

None Interval Type 0~4294967295 N/A None

 Level_1_Output(Le
vel_1_Ouput), Level_1_Output~0,
None Enumeration Type None
Level_2_Output(Le Level_2_Output~1
vel_2_Ouput)

SamplingEnable(Sa
mplingEnable), SamplingEnable~0,
None Enumeration Type None
SamplingUnable(Sa SamplingUnable~1
mplingUnable)

None Interval Type 0 N/A None

 CP_CFG(CP
Config),
CP_CFG~0,
UP_CFG(UP
None Enumeration Type UP_CFG~1, None
Config),
CP_UP_CFG~2
CP_UP_CFG(CPU
P Config)

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None String Type 0~256 characters N/A None

0~65535,70000~79
None Interval Type N/A None
999

Normal(Normal), Normal~0,
None Enumeration Type Abnormal(Abnormal Abnormal~1, None
), Blocked(Blocked) Blocked~2

Star Topology
Chain Topology
Interval Type 0~65535 N/A None
Tree Topology
S1-flex

Star Topology
Chain Topology
Enumeration Type S1(S1), X2(X2) S1~0, X2~1 None
Tree Topology
S1-flex
Star Topology
Chain Topology
Interval Type 0~65534 N/A None
Tree Topology
S1-flex

Star Topology
Chain Topology
Interval Type 0~65535 N/A None
Tree Topology
S1-flex

eMBMS Phase 1
based on
Interval Type 0 N/A None
Centralized MCE
Architecture
eMBMS Phase 1
based on
Interval Type 0~65535 N/A None
Centralized MCE
Architecture

None String Type 0~256 characters N/A None

eMBMS Phase 1
based on
Interval Type 0 N/A None
Centralized MCE
Architecture

eMBMS Phase 1
based on
Interval Type 0~65535 N/A None
Centralized MCE
Architecture

None String Type 0~256 characters N/A None

0~65535,70000~79
None Interval Type N/A None
999
 Normal(Normal), Normal~0,
None Enumeration Type Abnormal(Abnormal Abnormal~1, None
), Blocked(Blocked) Blocked~2

Normal(Normal),
Normal~0,
None Enumeration Type Abnormal(Abnormal None
Abnormal~1
)

None Interval Type 0~65535 N/A None

None String Type 0~150 characters N/A None

None String Type 0~20 characters N/A None

Null(NULL),
LowerLinkFault(Low
er Layer Link Fault),
SetupFail(Setup Null~0,
Failure), LowerLinkFault~1,
CfgErr(Configuratio SetupFail~2,
None Enumeration Type n Error), CfgErr~3, None
CellNotAvailable(e CellNotAvailable~4,
MBMS Cell Not NoLicense~5,
Available), Undefine~255
NoLicense(License
Restriction),
Undefine(Undefine)
None String Type 0~560 characters N/A None

Star Topology
Chain Topology
Interval Type 0~31 N/A None
Tree Topology
S1-flex

Star Topology
Chain Topology
Interval Type 0~5 N/A None
Tree Topology
S1-flex

Star Topology
Chain Topology
Interval Type 0~65535 N/A None
Tree Topology
S1-flex

Star Topology
Chain Topology
Interval Type 0~65535 N/A None
Tree Topology
S1-flex

Release_R8(Releas
e 8),
Release_R9(Releas
Star Topology Release_R8~0,
e 9),
Chain Topology Release_R9~1,
Release_R10(Rele
Tree Topology Enumeration Type Release_R10~2, None
ase 10),
3GPP R11 Release_R11~3,
Release_R11(Relea
Specifications Release_R12~4
se 11),
Release_R12(Rele
ase 12)
Star Topology
Chain Topology String Type 0~256 characters N/A None
Tree Topology

CP_CFG(CP
Star Topology Config),
CP_CFG~0,
Chain Topology UP_CFG(UP
Enumeration Type UP_CFG~1, None
Tree Topology Config),
CP_UP_CFG~2
S1-flex CP_UP_CFG(CPU
P Config)

Star Topology
Chain Topology
Interval Type 0~255 N/A None
Tree Topology
S1-flex

Hybrid RAN
Interval Type 0~5,255 N/A None
Sharing
 DISABLE(Disable), DISABLE~0,
None Enumeration Type None
ENABLE(Enable) ENABLE~1

None Interval Type 0~65534 N/A None

Normal(Normal),
Normal~0,
None Enumeration Type Abnormal(Abnormal None
Abnormal~1
)

FALSE(FALSE),
None Enumeration Type FALSE~0, TRUE~1 None
TRUE(TRUE)
 0~65535,70000~79
None Interval Type N/A None
999

Normal(Normal), Normal~0,
None Enumeration Type Abnormal(Abnormal Abnormal~1, None
), Blocked(Blocked) Blocked~2

Star Topology
Chain Topology
Interval Type 0~65534 N/A None
Tree Topology
S1-flex

Star Topology
Chain Topology 0~65535,70000~79
Interval Type N/A None
Tree Topology 999
S1-flex

Star Topology
Chain Topology
Tree Topology
Interval Type 0~5 N/A None
S1-flex
Hybrid RAN
Sharing
 Release_R8(Releas
e 8),
Release_R9(Releas
Star Topology Release_R8~0,
e 9),
Chain Topology Release_R9~1,
Release_R10(Rele
Tree Topology Enumeration Type Release_R10~2, None
ase 10),
3GPP R11 Release_R11~3,
Release_R11(Relea
Specifications Release_R12~4
se 11),
Release_R12(Rele
ase 12)

Star Topology
Chain Topology FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
Tree Topology TRUE(TRUE)
S1-flex
Star Topology
MANUAL_MODE, MANUAL_MODE~0
Chain Topology Enumeration Type None
AUTO_MODE , AUTO_MODE~1
Tree Topology

MANUAL_CREATE MANUAL_CREATE
Star Topology
D(Manual Created), D~0,
Chain Topology Enumeration Type None
AUTO_CREATED( AUTO_CREATED~
Tree Topology
Auto Created) 1
Star Topology
Chain Topology
Interval Type 0~255 N/A None
Tree Topology
S1-flex

Hybrid RAN
Interval Type 0~5,255 N/A None
Sharing

Normal(Normal),
Normal~0,
None Enumeration Type Abnormal(Abnormal None
Abnormal~1
)

Normal(Normal), Normal~0,
None Enumeration Type Abnormal(Abnormal Abnormal~1, None
), Blocked(Blocked) Blocked~2
 FALSE(FALSE),
FALSE~0, TRUE~1,
None Enumeration Type TRUE(TRUE), None
NULL~2
NULL(NULL)

None Interval Type 0~3600 N/A None

None String Type 0~150 characters N/A None

None String Type 0~224 characters N/A None

None String Type 0~300 characters N/A None

None Interval Type 0~255 N/A None

NULL(NULL),
LowerLinkFault(Low
er Layer Link Fault),
MmecImpact(Mmec
Impact),
SetupFail(Setup
Failure),
CfgErr(Configuratio NULL~0,
n Error), LowerLinkFault~1,
LicRestrict(License MmecImpact~2,
Restriction), SetupFail~3,
PlmnDiff(The PLMN CfgErr~4,
None Enumeration Type None
of the operator LicRestrict~5,
owning the S1 PlmnDiff~6,
interface is not TacNotCfg~7,
supported by the Deleting~8,
MME), Undefine~255
TacNotCfg(The TAC
for the operator
owning the S1
interface is not
configured),
Deleting(Deleting),
Undefine(Undefine)

None Interval Type 0 N/A None

 CP_CFG(CP
Config),
CP_CFG~0,
UP_CFG(UP
None Enumeration Type UP_CFG~1, None
Config),
CP_UP_CFG~2
CP_UP_CFG(CPU
P Config)

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None String Type 0~256 characters N/A None

0~65535,70000~79
None Interval Type N/A None
999

Normal(Normal), Normal~0,
None Enumeration Type Abnormal(Abnormal Abnormal~1, None
), Blocked(Blocked) Blocked~2

None Interval Type 0~49 N/A None

ALL(All),
IMEISV_TAC(TAC ALL~0,
of IMEISV), IMEISV_TAC~1,
None Enumeration Type None
IMEISV_TAC_SVN( IMEISV_TAC_SVN
TAC and SVN of ~2
IMEISV)
None Interval Type 0~99999999 N/A None

None Interval Type 0~99 N/A None

None String Type 0~40 characters N/A None

S1AP(S1AP),
S1AP~0, X2AP~1,
None Enumeration Type X2AP(X2AP), None
RRC~2
RRC(RRC)
None Interval Type 0~65535 N/A None

DISCARD~0,
None Enumeration Type DISCARD, MODIFY None
MODIFY~1

ZERO, ONE, TWO, ZERO~0, ONE~1,

None Enumeration Type None
THREE TWO~2, THREE~3
None Interval Type 0~268435455 N/A None

None Interval Type 1~800 N/A None

None String Type 0~100 characters N/A None

None Interval Type 0~268435455 N/A None

None Interval Type 1~800 N/A None

None String Type 0~100 characters N/A None

None Interval Type 0~268435455 N/A None

None Interval Type 1~800 N/A None

None String Type 0~100 characters N/A None

 ZERO, ONE, TWO, ZERO~0, ONE~1,
None Enumeration Type None
THREE TWO~2, THREE~3

None Interval Type 0~268435455 N/A None

None Interval Type 1~800 N/A None

None String Type 0~100 characters N/A None

None Interval Type 0~268435455 N/A None

None Interval Type 1~800 N/A None

None String Type 0~100 characters N/A None

None Interval Type 0~268435455 N/A None

None Interval Type 1~800 N/A None

None String Type 0~100 characters N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~7 N/A None

None Interval Type 0~1 N/A None

None Interval Type 0~6 N/A None

LTE_FDD_ONLY(L
TE FDD Only), LTE_FDD_ONLY~0
TWOMODE_NORM ,
AL(Two mode TWOMODE_NORM
None Enumeration Type None
Normal), AL~1,
THREEMODE_NO THREEMODE_NO
RMAL(Three mode RMAL~2
Normal)
 BLOCKED(Blocked
), BLOCKED~0,
None Enumeration Type None
UNBLOCKED(Unbl UNBLOCKED~1
ocked)

ENABLED(Enabled
), ENABLED~0,
None Enumeration Type None
DISABLED(Disable DISABLED~1
d)
None Interval Type 0~4294967295 N/A None

None Interval Type 0~7 N/A None

None Interval Type 0~1 N/A None

None Interval Type 0~6 N/A None

LTE_TDD_ONLY(L
TE TDD Only), LTE_TDD_ONLY~0
TWOMODE_NORM ,
AL(Two mode TWOMODE_NORM
None Enumeration Type None
Normal), AL~1,
THREEMODE_NO THREEMODE_NO
RMAL(Three mode RMAL~2
Normal)
 BLOCKED(Blocked
), BLOCKED~0,
None Enumeration Type None
UNBLOCKED(Unbl UNBLOCKED~1
ocked)

ENABLED(Enabled
), ENABLED~0,
None Enumeration Type None
DISABLED(Disable DISABLED~1
d)

None Interval Type 0~3 N/A None

CP_UP_CFG(CPU
None Enumeration Type CP_UP_CFG~2 None
P Config)
None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

IDEAL(Ideal
Backhaul), IDEAL~0,
None Enumeration Type None
NON_IDEAL(Non- NON_IDEAL~1
Ideal Backhaul)

None String Type 0~256 characters N/A None

None Interval Type 0~95 N/A None

Normal(Normal),
Normal~0,
None Enumeration Type Abnormal(Abnormal None
Abnormal~1
)

0~65535,70000~79
None Interval Type N/A None
999

Normal(Normal), Normal~0,
None Enumeration Type Abnormal(Abnormal Abnormal~1, None
), Blocked(Blocked) Blocked~2

None Interval Type 0~65534 N/A None

 DISABLE(Disable), DISABLE~0,
None Enumeration Type None
ENABLE(Enable) ENABLE~1
 MANUAL_MODE, MANUAL_MODE~0
None Enumeration Type None
AUTO_MODE , AUTO_MODE~1

Star Topology
Chain Topology Interval Type 0~11 N/A None
Tree Topology

Star Topology
Chain Topology Interval Type 0~5 N/A None
Tree Topology
Star Topology
Chain Topology Interval Type 0~65535 N/A None
Tree Topology

Star Topology
Chain Topology Interval Type 0~65535 N/A None
Tree Topology

Release_R8(Releas
e 8),
Release_R9(Releas
Star Topology Release_R8~0,
e 9),
Chain Topology Release_R9~1,
Release_R10(Rele
Tree Topology Enumeration Type Release_R10~2, None
ase 10),
3GPP R11 Release_R11~3,
Release_R11(Relea
Specifications Release_R12~4
se 11),
Release_R12(Rele
ase 12)

None String Type 0~256 characters N/A None

CP_CFG(CP
Config),
Star Topology CP_CFG~0,
UP_CFG(UP
Chain Topology Enumeration Type UP_CFG~1, None
Config),
Tree Topology CP_UP_CFG~2
CP_UP_CFG(CPU
P Config)
Hybrid RAN
Interval Type 0~5,255 N/A None
Sharing

Normal(Normal), Normal~0,
None Enumeration Type Abnormal(Abnormal Abnormal~1, None
), Blocked(Blocked) Blocked~2

None Interval Type 0~65535 N/A None

Normal(Normal),
Normal~0,
None Enumeration Type Abnormal(Abnormal None
Abnormal~1
)

0~65535,70000~79
None Interval Type N/A None
999

None String Type 3 characters N/A None

None String Type 2~3 characters N/A None

None Interval Type 0~1048575 N/A None

X2_BLACK_LIST_T
YPE(X2 Black List X2_BLACK_LIST_T
Type), YPE~0,
None Enumeration Type None
X2_WHITE_LIST_T X2_WHITE_LIST_T
YPE(X2 White List YPE~1
Type)
Star Topology
Chain Topology Interval Type 0~65535 N/A None
Tree Topology

Star Topology
0~65535,70000~79
Chain Topology Interval Type N/A None
999
Tree Topology

Star Topology
Chain Topology
Tree Topology Interval Type 0~5 N/A None
Hybrid RAN
Sharing

Release_R8(Releas
e 8),
Release_R9(Releas
Star Topology Release_R8~0,
e 9),
Chain Topology Release_R9~1,
Release_R10(Rele
Tree Topology Enumeration Type Release_R10~2, None
ase 10),
3GPP R11 Release_R11~3,
Release_R11(Relea
Specifications Release_R12~4
se 11),
Release_R12(Rele
ase 12)
Star Topology
MANUAL_MODE, MANUAL_MODE~0
Chain Topology Enumeration Type None
AUTO_MODE , AUTO_MODE~1
Tree Topology

MANUAL_CREATE MANUAL_CREATE
Star Topology
D(Manual Created), D~0,
Chain Topology Enumeration Type None
AUTO_CREATED( AUTO_CREATED~
Tree Topology
Auto Created) 1
Hybrid RAN
Interval Type 0~5,255 N/A None
Sharing

None String Type 0~50 characters N/A None

None String Type 0~50 characters N/A None

Normal(Normal),
Normal~0,
None Enumeration Type Abnormal(Abnormal None
Abnormal~1
)
 SCTP_LINK_FAUL
T(SCTP Link
Failure),
SETUP_FAILURE_
OCCUR(Setup SCTP_LINK_FAUL
Failure), T~0,
PEERIN_BLACK_L SETUP_FAILURE_
IST(Peer eNodeB OCCUR~1,
Blacklisted), PEERIN_BLACK_L
None Enumeration Type STATE_NORMAL(N IST~2, None
ULL), STATE_NORMAL~
SETUP_ONLY_ON 3,
E_LINK_ALLOWED SETUP_ONLY_ON
(Only one interface E_LINK_ALLOWED
allowed to be setup ~4, DELETING~5
between two logical
eNodeBs),
DELETING(Deletin
g)

DRX Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

DRX Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

 SF10(10
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF10~0, SF20~1,
SF80(80
SF32~2, SF40~3,
subframes),
SF64~4, SF80~5,
SF128(128
SF128~6,
subframes),
SF160~7,
SF160(160
SF256~8,
subframes),
DRX Enumeration Type SF320~9, subframe
SF256(256
SF512~10,
subframes),
SF640~11,
SF320(320
SF1024~12,
subframes),
SF1280~13,
SF512(512
SF2048~14,
subframes),
SF2560~15
SF640(640
subframes),
SF1024(1024
subframes),
SF1280(1280
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)
 PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
PSF1~0, PSF2~1,
subframes), PSF8(8
PSF3~2, PSF4~3,
PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF10(10 PDCCH
PSF20~8,
subframes),
PSF30~9,
DRX Enumeration Type PSF20(20 PDCCH subframe
PSF40~10,
subframes),
PSF50~11,
PSF30(30 PDCCH
PSF60~12,
subframes),
PSF80~13,
PSF40(40 PDCCH
PSF100~14,
subframes),
PSF200~15
PSF50(50 PDCCH
subframes),
PSF60(60 PDCCH
subframes),
PSF80(80 PDCCH
subframes),
PSF100(100
PDCCH
subframes),
PSF200(200
PDCCH subframes)
 subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
PSF1~0, PSF2~1,
subframes),
PSF3~2, PSF4~3,
PSF30(30 PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF40(40 PDCCH
PSF20~8,
subframes),
PSF30~9,
PSF50(50 PDCCH
PSF40~10,
subframes),
PSF50~11,
PSF60(60 PDCCH
PSF60~12,
DRX Enumeration Type subframes), subframe
PSF80~13,
PSF80(80 PDCCH
PSF100~14,
subframes),
PSF200~15,
PSF100(100
PSF300~16,
PDCCH
PSF500~17,
subframes),
PSF750~18,
PSF200(200
PSF1280~19,
PDCCH
PSF1920~20,
subframes),
PSF2560~21
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280

UU_DISABLE(Disa
ble), UU_DISABLE~0,
DRX Enumeration Type None
UU_ENABLE(Enabl UU_ENABLE~1
e)
 SF2(2 subframes),
SF5(5 subframes),
SF8(8 subframes),
SF10(10
subframes),
SF16(16
subframes),
SF20(20
subframes),
SF32(32 SF2~0, SF5~1,
subframes), SF8~2, SF10~3,
SF40(40 SF16~4, SF20~5,
subframes), SF32~6, SF40~7,
SF64(64 SF64~8, SF80~9,
DRX Enumeration Type subframes), SF128~10, subframe
SF80(80 SF160~11,
subframes), SF256~12,
SF128(128 SF320~13,
subframes), SF512~14,
SF160(160 SF640~15
subframes),
SF256(256
subframes),
SF320(320
subframes),
SF512(512
subframes),
SF640(640
subframes)
DRX Interval Type 1~16 N/A None
 SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes), SF128~6,
SF320(320 SF160~7,
subframes), SF256~8,
SF512(512 SF320~9,
subframes), SF512~10,
DRX Enumeration Type subframe
SF640(640 SF640~11,
subframes), SF1024~12,
SF1024(1024 SF1280~13,
subframes), SF2048~14,
SF1280(1280 SF2560~15
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)

SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes), SF128~6,
SF320(320 SF160~7,
subframes), SF256~8,
SF512(512 SF320~9,
subframes), SF512~10,
DRX Enumeration Type subframe
SF640(640 SF640~11,
subframes), SF1024~12,
SF1024(1024 SF1280~13,
subframes), SF2048~14,
SF1280(1280 SF2560~15
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)
 subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
PSF1~0, PSF2~1,
subframes),
PSF3~2, PSF4~3,
PSF30(30 PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF40(40 PDCCH
PSF20~8,
subframes),
PSF30~9,
PSF50(50 PDCCH
PSF40~10,
subframes),
PSF50~11,
PSF60(60 PDCCH
PSF60~12,
DRX Enumeration Type subframes), subframe
PSF80~13,
PSF80(80 PDCCH
PSF100~14,
subframes),
PSF200~15,
PSF100(100
PSF300~16,
PDCCH
PSF500~17,
subframes),
PSF750~18,
PSF200(200
PSF1280~19,
PDCCH
PSF1920~20,
subframes),
PSF2560~21
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280
 subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
PSF1~0, PSF2~1,
subframes),
PSF3~2, PSF4~3,
PSF30(30 PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF40(40 PDCCH
PSF20~8,
subframes),
PSF30~9,
PSF50(50 PDCCH
PSF40~10,
subframes),
PSF50~11,
PSF60(60 PDCCH
PSF60~12,
DRX Enumeration Type subframes), subframe
PSF80~13,
PSF80(80 PDCCH
PSF100~14,
subframes),
PSF200~15,
PSF100(100
PSF300~16,
PDCCH
PSF500~17,
subframes),
PSF750~18,
PSF200(200
PSF1280~19,
PDCCH
PSF1920~20,
subframes),
PSF2560~21
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280

Extended-QCI
Dynamic Interval Type 10~254 N/A None
Scheduling

IMSSignalling(IMS
Signalling),
IMSSignalling~5,
LowDelay(Low
Dynamic LowDelay~7,
Enumeration Type Delay), None
Scheduling TCPorBuffStreamin
TCPorBuffStreamin
g~9
g(TCP Based or
Buffered Streaming)
Dynamic
Scheduling
Transport Interval Type 1~1000 N/A None
Differentiated Flow
Control

Dynamic
Interval Type 1~1000 N/A None
Scheduling

MinGbrRate_0_KB( MinGbrRate_0_KB
0kB/s), ~0,
MinGbrRate_1_KB( MinGbrRate_1_KB
1kB/s), ~8000,
MinGbrRate_2_KB( MinGbrRate_2_KB
2kB/s), ~16000,
MinGbrRate_4_KB( MinGbrRate_4_KB
Dynamic
4kB/s), ~32000,
Scheduling
MinGbrRate_8_KB( MinGbrRate_8_KB
Transport
8kB/s), ~64000,
Overbooking
MinGbrRate_16_K MinGbrRate_16_K
Transport Enumeration Type kB/s
B(16kB/s), B~128000,
Differentiated Flow
MinGbrRate_32_K MinGbrRate_32_K
Control
B(32kB/s), B~256000,
Transport Resource
MinGbrRate_64_K MinGbrRate_64_K
Overload Control
B(64kB/s), B~512000,
MinGbrRate_128_K MinGbrRate_128_K
B(128kB/s), B~1024000,
MinGbrRate_256_K MinGbrRate_256_K
B(256kB/s), B~2048000,
MinGbrRate_512_K MinGbrRate_512_K
B(512kB/s) B~4096000
 MinGbrRate_0_KB( MinGbrRate_0_KB
0kB/s), ~0,
MinGbrRate_1_KB( MinGbrRate_1_KB
1kB/s), ~8000,
MinGbrRate_2_KB( MinGbrRate_2_KB
2kB/s), ~16000,
MinGbrRate_4_KB( MinGbrRate_4_KB
Dynamic
4kB/s), ~32000,
Scheduling
MinGbrRate_8_KB( MinGbrRate_8_KB
Transport
8kB/s), ~64000,
Overbooking
MinGbrRate_16_K MinGbrRate_16_K
Transport Resource Enumeration Type kB/s
B(16kB/s), B~128000,
Overload Control
MinGbrRate_32_K MinGbrRate_32_K
Different Transport
B(32kB/s), B~256000,
Paths based on
MinGbrRate_64_K MinGbrRate_64_K
QoS Grade
B(64kB/s), B~512000,
MinGbrRate_128_K MinGbrRate_128_K
B(128kB/s), B~1024000,
MinGbrRate_256_K MinGbrRate_256_K
B(256kB/s), B~2048000,
MinGbrRate_512_K MinGbrRate_512_K
B(512kB/s) B~4096000

Enhanced
Scheduling
Interval Type 0~10 N/A None
Dynamic
Scheduling
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Interval Type 0~39 N/A None
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
CDMA2000 1xRTT

PBR_0_KBps(0kB/
s),
PBR_8_KBps(8kB/
s),
PBR_16_KBps(16k PBR_0_KBps~0,
B/s), PBR_8_KBps~1,
Dynamic PBR_32_KBps(32k PBR_16_KBps~2,
Scheduling B/s), PBR_32_KBps~3,
Enumeration Type kB/s
Enhanced PBR_64_KBps(64k PBR_64_KBps~4,
Scheduling B/s), PBR_128_KBps~5,
PBR_128_KBps(12 PBR_256_KBps~6,
8kB/s), PBR_INFINITY~7
PBR_256_KBps(25
6kB/s),
PBR_INFINITY(Infi
nity)
Dynamic
Scheduling
Interval Type 9~16 N/A None
Enhanced
Scheduling

Radio Bearer
Interval Type 0~39 N/A None
Management

Enhanced PAID_USER(Paid
Scheduling User), PAID_USER~0,
Enumeration Type None
Dynamic FREE_USER(Free FREE_USER~1
Scheduling User)
Transport
Overbooking
Transport
Differentiated Flow FLOW_CTRL(Flow
FLOW_CTRL~0,
Control Control),
Enumeration Type NON_FLOW_CTRL None
Transport Resource NON_FLOW_CTRL
~1
Overload Control (Non Flow Control)
Different Transport
Paths based on
QoS Grade

Enhanced extended
Enumeration Type NO, YES NO~0, YES~1 None
QCI
 EQUAL_PRI_TO_Q
CI1(Priority same EQUAL_PRI_TO_Q
Enhanced extended as QCI1), CI1~0,
Enumeration Type None
QCI HIGHER_PRI_THA HIGHER_PRI_THA
N_QCI1(Priority N_QCI1~1
Higher than QCI1)
 EQUAL_PRI_TO_Q
CI1(Priority same EQUAL_PRI_TO_Q
Enhanced extended as QCI1), CI1~0,
Enumeration Type None
QCI HIGHER_PRI_THA HIGHER_PRI_THA
N_QCI1(Priority N_QCI1~1
Higher than QCI1)

SRVCC to UTRAN
SRVCC to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Interval Type 0~39 N/A None
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
PS Inter-RAT PS_HO~0,
PS_HO, SRVCC,
Mobility between E- Bit Field Type SRVCC~1, None
REDIRECTION
UTRAN and REDIRECTION~2
UTRAN

SRVCC to GERAN
PS Inter-RAT
Mobility between E- Bit Field Type SRVCC SRVCC~0 None
UTRAN and
GERAN
SRVCC to GERAN
PS_HO~0,
PS Inter-RAT PS_HO, CCO_HO,
CCO_HO~2,
Mobility between E- Bit Field Type SRVCC, None
SRVCC~3,
UTRAN and REDIRECTION
REDIRECTION~4
GERAN

SRVCC(CDMA1XR
None Bit Field Type SRVCC~0 None
TTHoSwitch)
PS Inter-RAT
Mobility between E- OPT_HO, OPT_HO~0,
Bit Field Type None
UTRAN and NON_OPT_HO NON_OPT_HO~1
CDMA2000

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
PERMIT_HO_ENU PERMIT_HO_ENU
Mobility between E-
M(Permit Ho), M~0,
UTRAN and Enumeration Type None
FORBID_HO_ENU FORBID_HO_ENU
CDMA2000
M(Forbid Ho) M~1
Coverage Based
Intra-frequency
Handover
SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN

PERMIT_FAST_AN
PERMIT_FAST_AN
R_MEAS_ENUM~0
R_MEAS_ENUM,
None Enumeration Type , None
FORBID_FAST_AN
FORBID_FAST_AN
R_MEAS_ENUM
R_MEAS_ENUM~1
None Interval Type 0~15 N/A None

None Interval Type 0~15 N/A None

None Interval Type 0~15 N/A None

Radio Bearer
Interval Type 0~39 N/A None
Management
 DiscardTimer_50(5 DiscardTimer_50~0
0), ,
DiscardTimer_100( DiscardTimer_100~
100), 1,
DiscardTimer_150( DiscardTimer_150~
150), 2,
DiscardTimer_300( DiscardTimer_300~
Radio Bearer 300), 3,
Enumeration Type ms
Management DiscardTimer_500( DiscardTimer_500~
500), 4,
DiscardTimer_750( DiscardTimer_750~
750), 5,
DiscardTimer_1500 DiscardTimer_1500
(1500), ~6,
DiscardTimer_Infinit DiscardTimer_Infinit
y(infinity) y~7

RlcMode_AM(Ackn
owledge Mode),
Radio Bearer RlcMode_AM~1,
Enumeration Type RlcMode_UM(Un- None
Management RlcMode_UM~2
acknowledge
Mode)
 Maxretx_Threshold Maxretx_Threshold
_t1(1), _t1~0,
Maxretx_Threshold Maxretx_Threshold
_t2(2), _t2~1,
Maxretx_Threshold Maxretx_Threshold
_t3(3), _t3~2,
Maxretx_Threshold Maxretx_Threshold
Radio Bearer _t4(4), _t4~3,
Enumeration Type None
Management Maxretx_Threshold Maxretx_Threshold
_t6(6), _t6~4,
Maxretx_Threshold Maxretx_Threshold
_t8(8), _t8~5,
Maxretx_Threshold Maxretx_Threshold
_t16(16), _t16~6,
Maxretx_Threshold Maxretx_Threshold
_t32(32) _t32~7
 Maxretx_Threshold Maxretx_Threshold
_t1(1), _t1~0,
Maxretx_Threshold Maxretx_Threshold
_t2(2), _t2~1,
Maxretx_Threshold Maxretx_Threshold
_t3(3), _t3~2,
Maxretx_Threshold Maxretx_Threshold
Radio Bearer _t4(4), _t4~3,
Enumeration Type None
Management Maxretx_Threshold Maxretx_Threshold
_t6(6), _t6~4,
Maxretx_Threshold Maxretx_Threshold
_t8(8), _t8~5,
Maxretx_Threshold Maxretx_Threshold
_t16(16), _t16~6,
Maxretx_Threshold Maxretx_Threshold
_t32(32) _t32~7
 PollByte_kb25(25
kBytes),
PollByte_kb50(50
kBytes),
PollByte_kb75(75
kBytes),
PollByte_kb25~0,
PollByte_kb100(10
PollByte_kb50~1,
0 kBytes),
PollByte_kb75~2,
PollByte_kb125(12
PollByte_kb100~3,
5 kBytes),
PollByte_kb125~4,
PollByte_kb250(25
PollByte_kb250~5,
0 kBytes),
PollByte_kb375~6,
PollByte_kb375(37
PollByte_kb500~7,
5 kBytes),
PollByte_kb750~8,
Radio Bearer PollByte_kb500(50
Enumeration Type PollByte_kb1000~9, byte
Management 0 kBytes),
PollByte_kb1250~1
PollByte_kb750(75
0,
0 kBytes),
PollByte_kb1500~1
PollByte_kb1000(1
1,
000 kBytes),
PollByte_kb2000~1
PollByte_kb1250(1
2,
250 kBytes),
PollByte_kb3000~1
PollByte_kb1500(1
3,
500 kBytes),
PollByte_infinity~14
PollByte_kb2000(2
000 kBytes),
PollByte_kb3000(3
000 kBytes),
PollByte_infinity(infi
nite kBytes)
 PollByte_kb25(25
kBytes),
PollByte_kb50(50
kBytes),
PollByte_kb75(75
kBytes),
PollByte_kb25~0,
PollByte_kb100(10
PollByte_kb50~1,
0 kBytes),
PollByte_kb75~2,
PollByte_kb125(12
PollByte_kb100~3,
5 kBytes),
PollByte_kb125~4,
PollByte_kb250(25
PollByte_kb250~5,
0 kBytes),
PollByte_kb375~6,
PollByte_kb375(37
PollByte_kb500~7,
5 kBytes),
PollByte_kb750~8,
Radio Bearer PollByte_kb500(50
Enumeration Type PollByte_kb1000~9, byte
Management 0 kBytes),
PollByte_kb1250~1
PollByte_kb750(75
0,
0 kBytes),
PollByte_kb1500~1
PollByte_kb1000(1
1,
000 kBytes),
PollByte_kb2000~1
PollByte_kb1250(1
2,
250 kBytes),
PollByte_kb3000~1
PollByte_kb1500(1
3,
500 kBytes),
PollByte_infinity~14
PollByte_kb2000(2
000 kBytes),
PollByte_kb3000(3
000 kBytes),
PollByte_infinity(infi
nite kBytes)
 PollPdu_p4(4
PDUs),
PollPdu_p8(8
PDUs),
PollPdu_p16(16 PollPdu_p4~0,
PDUs), PollPdu_p8~1,
PollPdu_p32(32 PollPdu_p16~2,
Radio Bearer PDUs), PollPdu_p32~3,
Enumeration Type None
Management PollPdu_p64(64 PollPdu_p64~4,
PDUs), PollPdu_p128~5,
PollPdu_p128(128 PollPdu_p256~6,
PDUs), PollPdu_Infinity~7
PollPdu_p256(256
PDUs),
PollPdu_Infinity(infi
nite PDUs)
 PollPdu_p4(4
PDUs),
PollPdu_p8(8
PDUs),
PollPdu_p16(16 PollPdu_p4~0,
PDUs), PollPdu_p8~1,
PollPdu_p32(32 PollPdu_p16~2,
Radio Bearer PDUs), PollPdu_p32~3,
Enumeration Type None
Management PollPdu_p64(64 PollPdu_p64~4,
PDUs), PollPdu_p128~5,
PollPdu_p128(128 PollPdu_p256~6,
PDUs), PollPdu_Infinity~7
PollPdu_p256(256
PDUs),
PollPdu_Infinity(infi
nite PDUs)
 5), 8,
Tpollretrans_m100( Tpollretrans_m100~
100), 19,
Tpollretrans_m105( Tpollretrans_m105~
105), 20,
Tpollretrans_m110( Tpollretrans_m110~
110), 21,
Tpollretrans_m115( Tpollretrans_m115~
115), 22,
Tpollretrans_m120( Tpollretrans_m120~
120), 23,
Tpollretrans_m125( Tpollretrans_m125~
125), 24,
Tpollretrans_m130( Tpollretrans_m130~
130), 25,
Tpollretrans_m135( Tpollretrans_m135~
135), 26,
Tpollretrans_m140( Tpollretrans_m140~
Radio Bearer
Enumeration Type 140), 27, ms
Management
Tpollretrans_m145( Tpollretrans_m145~
145), 28,
Tpollretrans_m150( Tpollretrans_m150~
150), 29,
Tpollretrans_m155( Tpollretrans_m155~
155), 30,
Tpollretrans_m160( Tpollretrans_m160~
160), 31,
Tpollretrans_m165( Tpollretrans_m165~
165), 32,
Tpollretrans_m170( Tpollretrans_m170~
170), 33,
Tpollretrans_m175( Tpollretrans_m175~
175), 34,
Tpollretrans_m180( Tpollretrans_m180~
180), 35,
Tpollretrans_m185( Tpollretrans_m185~
185), 36,
 5), 8,
Tpollretrans_m100( Tpollretrans_m100~
100), 19,
Tpollretrans_m105( Tpollretrans_m105~
105), 20,
Tpollretrans_m110( Tpollretrans_m110~
110), 21,
Tpollretrans_m115( Tpollretrans_m115~
115), 22,
Tpollretrans_m120( Tpollretrans_m120~
120), 23,
Tpollretrans_m125( Tpollretrans_m125~
125), 24,
Tpollretrans_m130( Tpollretrans_m130~
130), 25,
Tpollretrans_m135( Tpollretrans_m135~
135), 26,
Tpollretrans_m140( Tpollretrans_m140~
Radio Bearer
Enumeration Type 140), 27, ms
Management
Tpollretrans_m145( Tpollretrans_m145~
145), 28,
Tpollretrans_m150( Tpollretrans_m150~
150), 29,
Tpollretrans_m155( Tpollretrans_m155~
155), 30,
Tpollretrans_m160( Tpollretrans_m160~
160), 31,
Tpollretrans_m165( Tpollretrans_m165~
165), 32,
Tpollretrans_m170( Tpollretrans_m170~
170), 33,
Tpollretrans_m175( Tpollretrans_m175~
175), 34,
Tpollretrans_m180( Tpollretrans_m180~
180), 35,
Tpollretrans_m185( Tpollretrans_m185~
185), 36,
 Tstatprohibit_m95(9 Tstatprohibit_m95~
5), 19,
Tstatprohibit_m100( Tstatprohibit_m100
100), ~20,
Tstatprohibit_m105( Tstatprohibit_m105
105), ~21,
Tstatprohibit_m110( Tstatprohibit_m110~
110), 22,
Tstatprohibit_m115( Tstatprohibit_m115~
115), 23,
Tstatprohibit_m120( Tstatprohibit_m120
120), ~24,
Tstatprohibit_m125( Tstatprohibit_m125
125), ~25,
Tstatprohibit_m130( Tstatprohibit_m130
130), ~26,
Tstatprohibit_m135( Tstatprohibit_m135
135), ~27,
Radio Bearer Tstatprohibit_m140( Tstatprohibit_m140
Enumeration Type ms
Management 140), ~28,
Tstatprohibit_m145( Tstatprohibit_m145
145), ~29,
Tstatprohibit_m150( Tstatprohibit_m150
150), ~30,
Tstatprohibit_m155( Tstatprohibit_m155
155), ~31,
Tstatprohibit_m160( Tstatprohibit_m160
160), ~32,
Tstatprohibit_m165( Tstatprohibit_m165
165), ~33,
Tstatprohibit_m170( Tstatprohibit_m170
170), ~34,
Tstatprohibit_m175( Tstatprohibit_m175
175), ~35,
Tstatprohibit_m180( Tstatprohibit_m180
180), ~36,
Tstatprohibit_m185( Tstatprohibit_m185
185), ~37,
 Tstatprohibit_m95(9 Tstatprohibit_m95~
5), 19,
Tstatprohibit_m100( Tstatprohibit_m100
100), ~20,
Tstatprohibit_m105( Tstatprohibit_m105
105), ~21,
Tstatprohibit_m110( Tstatprohibit_m110~
110), 22,
Tstatprohibit_m115( Tstatprohibit_m115~
115), 23,
Tstatprohibit_m120( Tstatprohibit_m120
120), ~24,
Tstatprohibit_m125( Tstatprohibit_m125
125), ~25,
Tstatprohibit_m130( Tstatprohibit_m130
130), ~26,
Tstatprohibit_m135( Tstatprohibit_m135
135), ~27,
Radio Bearer Tstatprohibit_m140( Tstatprohibit_m140
Enumeration Type ms
Management 140), ~28,
Tstatprohibit_m145( Tstatprohibit_m145
145), ~29,
Tstatprohibit_m150( Tstatprohibit_m150
150), ~30,
Tstatprohibit_m155( Tstatprohibit_m155
155), ~31,
Tstatprohibit_m160( Tstatprohibit_m160
160), ~32,
Tstatprohibit_m165( Tstatprohibit_m165
165), ~33,
Tstatprohibit_m170( Tstatprohibit_m170
170), ~34,
Tstatprohibit_m175( Tstatprohibit_m175
175), ~35,
Tstatprohibit_m180( Tstatprohibit_m180
180), ~36,
Tstatprohibit_m185( Tstatprohibit_m185
185), ~37,
 0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
0), ,
Treordering_m45(4 Treordering_m45~9
5), ,
Treordering_m50(5 Treordering_m50~1
0), 0,
Treordering_m55(5 Treordering_m55~1
5), 1,
Treordering_m60(6 Treordering_m60~1
0), 2,
Treordering_m65(6 Treordering_m65~1
5), 3,
Treordering_m70(7 Treordering_m70~1
0), 4,
Treordering_m75(7 Treordering_m75~1
Radio Bearer 5), 5,
Enumeration Type ms
Management Treordering_m80(8 Treordering_m80~1
0), 6,
Treordering_m85(8 Treordering_m85~1
5), 7,
Treordering_m90(9 Treordering_m90~1
0), 8,
Treordering_m95(9 Treordering_m95~1
5), 9,
Treordering_m100( Treordering_m100~
100), 20,
Treordering_m110(1 Treordering_m110~
10), 21,
Treordering_m120( Treordering_m120~
120), 22,
Treordering_m130( Treordering_m130~
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~
 0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
0), ,
Treordering_m45(4 Treordering_m45~9
5), ,
Treordering_m50(5 Treordering_m50~1
0), 0,
Treordering_m55(5 Treordering_m55~1
5), 1,
Treordering_m60(6 Treordering_m60~1
0), 2,
Treordering_m65(6 Treordering_m65~1
5), 3,
Treordering_m70(7 Treordering_m70~1
0), 4,
Treordering_m75(7 Treordering_m75~1
Radio Bearer 5), 5,
Enumeration Type ms
Management Treordering_m80(8 Treordering_m80~1
0), 6,
Treordering_m85(8 Treordering_m85~1
5), 7,
Treordering_m90(9 Treordering_m90~1
0), 8,
Treordering_m95(9 Treordering_m95~1
5), 9,
Treordering_m100( Treordering_m100~
100), 20,
Treordering_m110(1 Treordering_m110~
10), 21,
Treordering_m120( Treordering_m120~
120), 22,
Treordering_m130( Treordering_m130~
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~

PdcpSnsize_7bits(7 PdcpSnsize_7bits~
Radio Bearer ), 0,
Enumeration Type bit
Management PdcpSnsize_12bits( PdcpSnsize_12bits
12) ~1
 RlcSnSize_size5(5)
RlcSnSize_size5~0,
Radio Bearer ,
Enumeration Type RlcSnSize_size10~ bit
Management RlcSnSize_size10(1
1
0)

RlcSnSize_size5(5)
RlcSnSize_size5~0,
Radio Bearer ,
Enumeration Type RlcSnSize_size10~ bit
Management RlcSnSize_size10(1
1
0)
 0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
0), ,
Treordering_m45(4 Treordering_m45~9
5), ,
Treordering_m50(5 Treordering_m50~1
0), 0,
Treordering_m55(5 Treordering_m55~1
5), 1,
Treordering_m60(6 Treordering_m60~1
0), 2,
Treordering_m65(6 Treordering_m65~1
5), 3,
Treordering_m70(7 Treordering_m70~1
0), 4,
Treordering_m75(7 Treordering_m75~1
Radio Bearer 5), 5,
Enumeration Type ms
Management Treordering_m80(8 Treordering_m80~1
0), 6,
Treordering_m85(8 Treordering_m85~1
5), 7,
Treordering_m90(9 Treordering_m90~1
0), 8,
Treordering_m95(9 Treordering_m95~1
5), 9,
Treordering_m100( Treordering_m100~
100), 20,
Treordering_m110(1 Treordering_m110~
10), 21,
Treordering_m120( Treordering_m120~
120), 22,
Treordering_m130( Treordering_m130~
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~
 0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
0), ,
Treordering_m45(4 Treordering_m45~9
5), ,
Treordering_m50(5 Treordering_m50~1
0), 0,
Treordering_m55(5 Treordering_m55~1
5), 1,
Treordering_m60(6 Treordering_m60~1
0), 2,
Treordering_m65(6 Treordering_m65~1
5), 3,
Treordering_m70(7 Treordering_m70~1
0), 4,
Treordering_m75(7 Treordering_m75~1
Radio Bearer 5), 5,
Enumeration Type ms
Management Treordering_m80(8 Treordering_m80~1
0), 6,
Treordering_m85(8 Treordering_m85~1
5), 7,
Treordering_m90(9 Treordering_m90~1
0), 8,
Treordering_m95(9 Treordering_m95~1
5), 9,
Treordering_m100( Treordering_m100~
100), 20,
Treordering_m110(1 Treordering_m110~
10), 21,
Treordering_m120( Treordering_m120~
120), 22,
Treordering_m130( Treordering_m130~
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~

Radio Bearer FALSE(FALSE),

Enumeration Type FALSE~0, TRUE~1 None
Management TRUE(TRUE)
Radio Bearer
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
 m65~12, m70~13,
m75~14, m80~15,
m85~16, m90~17,
m5(), m10(), m15(), m95~18, m100~19,
m20(), m25(), m105~20,
m30(), m35(), m110~21,
m40(), m45(), m115~22,
m50(), m55(), m120~23,
m60(), m65(), m125~24,
m70(), m75(), m130~25,
m80(), m85(), m135~26,
m90(), m95(), m140~27,
m100(), m105(), m145~28,
m110(), m115(), m150~29,
m120(), m125(), m155~30,
m130(), m135(), m160~31,
Radio Bearer
Enumeration Type m140(), m145(), m165~32, ms
Management
m150(), m155(), m170~33,
m160(), m165(), m175~34,
m170(), m175(), m180~35,
m180(), m185(), m185~36,
m190(), m195(), m190~37,
m200(), m205(), m195~38,
m210(), m215(), m200~39,
m220(), m225(), m205~40,
m230(), m235(), m210~41,
m240(), m245(), m215~42,
m250(), m300(), m220~43,
m350(), m400(), m225~44,
m450(), m500() m230~45,
m235~46,
m240~47,
m245~48,
 m40~8, m45~9,
m50~10, m55~11,
m60~12, m65~13,
m70~14, m75~15,
m80~16, m85~17,
m90~18, m95~19,
m100~20,
m105~21,
m110~22,
m115~23,
m0, m5, m10, m15,
m120~24,
m20, m25, m30,
m125~25,
m35, m40, m45,
m130~26,
m50, m55, m60,
m135~27,
m65, m70, m75,
m140~28,
m80, m85, m90,
m145~29,
m95, m100, m105,
m150~30,
m110, m115, m120,
m155~31,
m125, m130, m135,
Radio Bearer m160~32,
Enumeration Type m140, m145, m150, ms
Management m165~33,
m155, m160, m165,
m170~34,
m170, m175, m180,
m175~35,
m185, m190, m195,
m180~36,
m200, m205, m210,
m185~37,
m215, m220, m225,
m190~38,
m230, m235, m240,
m195~39,
m245, m250, m300,
m200~40,
m350, m400, m450,
m205~41,
m500
m210~42,
m215~43,
m220~44,
m225~45,
m230~46,
m235~47,
m240~48,
m245~49,
m250~50,
m300~51,
 m65~12, m70~13,
m75~14, m80~15,
m85~16, m90~17,
m5(), m10(), m15(), m95~18, m100~19,
m20(), m25(), m105~20,
m30(), m35(), m110~21,
m40(), m45(), m115~22,
m50(), m55(), m120~23,
m60(), m65(), m125~24,
m70(), m75(), m130~25,
m80(), m85(), m135~26,
m90(), m95(), m140~27,
m100(), m105(), m145~28,
m110(), m115(), m150~29,
m120(), m125(), m155~30,
m130(), m135(), m160~31,
Radio Bearer
Enumeration Type m140(), m145(), m165~32, ms
Management
m150(), m155(), m170~33,
m160(), m165(), m175~34,
m170(), m175(), m180~35,
m180(), m185(), m185~36,
m190(), m195(), m190~37,
m200(), m205(), m195~38,
m210(), m215(), m200~39,
m220(), m225(), m205~40,
m230(), m235(), m210~41,
m240(), m245(), m215~42,
m250(), m300(), m220~43,
m350(), m400(), m225~44,
m450(), m500() m230~45,
m235~46,
m240~47,
m245~48,
 m40~8, m45~9,
m50~10, m55~11,
m60~12, m65~13,
m70~14, m75~15,
m80~16, m85~17,
m90~18, m95~19,
m100~20,
m105~21,
m110~22,
m115~23,
m0, m5, m10, m15,
m120~24,
m20, m25, m30,
m125~25,
m35, m40, m45,
m130~26,
m50, m55, m60,
m135~27,
m65, m70, m75,
m140~28,
m80, m85, m90,
m145~29,
m95, m100, m105,
m150~30,
m110, m115, m120,
m155~31,
m125, m130, m135,
Radio Bearer m160~32,
Enumeration Type m140, m145, m150, ms
Management m165~33,
m155, m160, m165,
m170~34,
m170, m175, m180,
m175~35,
m185, m190, m195,
m180~36,
m200, m205, m210,
m185~37,
m215, m220, m225,
m190~38,
m230, m235, m240,
m195~39,
m245, m250, m300,
m200~40,
m350, m400, m450,
m205~41,
m500
m210~42,
m215~43,
m220~44,
m225~45,
m230~46,
m235~47,
m240~48,
m245~49,
m250~50,
m300~51,
Radio Bearer
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
Radio Bearer
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
 DiscardTimer_50(5 DiscardTimer_50~0
0), ,
DiscardTimer_100( DiscardTimer_100~
100), 1,
DiscardTimer_150( DiscardTimer_150~
150), 2,
DiscardTimer_300( DiscardTimer_300~
Radio Bearer 300), 3,
Enumeration Type ms
Management DiscardTimer_500( DiscardTimer_500~
500), 4,
DiscardTimer_750( DiscardTimer_750~
750), 5,
DiscardTimer_1500 DiscardTimer_1500
(1500), ~6,
DiscardTimer_Infinit DiscardTimer_Infinit
y(infinity) y~7
Radio Bearer
Interval Type 0~65535 N/A None
Management
 0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
0), ,
Treordering_m45(4 Treordering_m45~9
5), ,
Treordering_m50(5 Treordering_m50~1
0), 0,
Treordering_m55(5 Treordering_m55~1
5), 1,
Treordering_m60(6 Treordering_m60~1
0), 2,
Treordering_m65(6 Treordering_m65~1
5), 3,
Treordering_m70(7 Treordering_m70~1
0), 4,
Treordering_m75(7 Treordering_m75~1
Radio Bearer 5), 5,
Enumeration Type ms
Management Treordering_m80(8 Treordering_m80~1
0), 6,
Treordering_m85(8 Treordering_m85~1
5), 7,
Treordering_m90(9 Treordering_m90~1
0), 8,
Treordering_m95(9 Treordering_m95~1
5), 9,
Treordering_m100( Treordering_m100~
100), 20,
Treordering_m110(1 Treordering_m110~
10), 21,
Treordering_m120( Treordering_m120~
120), 22,
Treordering_m130( Treordering_m130~
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~
 m40(40), m45(45), m40~8, m45~9,
m50(50), m55(55), m50~10, m55~11,
m60(60), m65(65), m60~12, m65~13,
m70(70), m75(75), m70~14, m75~15,
m80(80), m85(85), m80~16, m85~17,
m90(90), m95(95), m90~18, m95~19,
m100(100), m100~20,
m105(105), m105~21,
m110(110), m110~22,
m115(115), m115~23,
m120(120), m120~24,
m125(125), m125~25,
m130(130), m130~26,
m135(135), m135~27,
m140(140), m140~28,
m145(145), m145~29,
m150(150), m150~30,
m155(155), m155~31,
Radio Bearer m160(160), m160~32,
Enumeration Type ms
Management m165(165), m165~33,
m170(170), m170~34,
m175(175), m175~35,
m180(180), m180~36,
m185(185), m185~37,
m190(190), m190~38,
m195(195), m195~39,
m200(200), m200~40,
m205(205), m205~41,
m210(210), m210~42,
m215(215), m215~43,
m220(220), m220~44,
m225(225), m225~45,
m230(230), m230~46,
m235(235), m235~47,
m240(240), m240~48,
m245(245), m245~49,
m250(250), m250~50,
m300(300), m300~51,

AmPdcpSnsize_12 AmPdcpSnsize_12
Radio Bearer bits(12), bits~0,
Enumeration Type bit
Management AmPdcpSnsize_15 AmPdcpSnsize_15
bits(15) bits~1

Radio Bearer SRB1(SRB1),

Enumeration Type SRB1~1, SRB2~2 None
Management SRB2(SRB2)
 Maxretx_Threshold Maxretx_Threshold
_t1(1), _t1~0,
Maxretx_Threshold Maxretx_Threshold
_t2(2), _t2~1,
Maxretx_Threshold Maxretx_Threshold
_t3(3), _t3~2,
Maxretx_Threshold Maxretx_Threshold
Radio Bearer _t4(4), _t4~3,
Enumeration Type None
Management Maxretx_Threshold Maxretx_Threshold
_t6(6), _t6~4,
Maxretx_Threshold Maxretx_Threshold
_t8(8), _t8~5,
Maxretx_Threshold Maxretx_Threshold
_t16(16), _t16~6,
Maxretx_Threshold Maxretx_Threshold
_t32(32) _t32~7

Maxretx_Threshold Maxretx_Threshold
_t1(1), _t1~0,
Maxretx_Threshold Maxretx_Threshold
_t2(2), _t2~1,
Maxretx_Threshold Maxretx_Threshold
_t3(3), _t3~2,
Maxretx_Threshold Maxretx_Threshold
Radio Bearer _t4(4), _t4~3,
Enumeration Type None
Management Maxretx_Threshold Maxretx_Threshold
_t6(6), _t6~4,
Maxretx_Threshold Maxretx_Threshold
_t8(8), _t8~5,
Maxretx_Threshold Maxretx_Threshold
_t16(16), _t16~6,
Maxretx_Threshold Maxretx_Threshold
_t32(32) _t32~7
 PollByte_kb25(25
kBytes),
PollByte_kb50(50
kBytes),
PollByte_kb75(75
kBytes),
PollByte_kb25~0,
PollByte_kb100(10
PollByte_kb50~1,
0 kBytes),
PollByte_kb75~2,
PollByte_kb125(12
PollByte_kb100~3,
5 kBytes),
PollByte_kb125~4,
PollByte_kb250(25
PollByte_kb250~5,
0 kBytes),
PollByte_kb375~6,
PollByte_kb375(37
PollByte_kb500~7,
5 kBytes),
PollByte_kb750~8,
Radio Bearer PollByte_kb500(50
Enumeration Type PollByte_kb1000~9, byte
Management 0 kBytes),
PollByte_kb1250~1
PollByte_kb750(75
0,
0 kBytes),
PollByte_kb1500~1
PollByte_kb1000(1
1,
000 kBytes),
PollByte_kb2000~1
PollByte_kb1250(1
2,
250 kBytes),
PollByte_kb3000~1
PollByte_kb1500(1
3,
500 kBytes),
PollByte_infinity~14
PollByte_kb2000(2
000 kBytes),
PollByte_kb3000(3
000 kBytes),
PollByte_infinity(infi
nite kBytes)
 PollByte_kb25(25
kBytes),
PollByte_kb50(50
kBytes),
PollByte_kb75(75
kBytes),
PollByte_kb25~0,
PollByte_kb100(10
PollByte_kb50~1,
0 kBytes),
PollByte_kb75~2,
PollByte_kb125(12
PollByte_kb100~3,
5 kBytes),
PollByte_kb125~4,
PollByte_kb250(25
PollByte_kb250~5,
0 kBytes),
PollByte_kb375~6,
PollByte_kb375(37
PollByte_kb500~7,
5 kBytes),
PollByte_kb750~8,
Radio Bearer PollByte_kb500(50
Enumeration Type PollByte_kb1000~9, byte
Management 0 kBytes),
PollByte_kb1250~1
PollByte_kb750(75
0,
0 kBytes),
PollByte_kb1500~1
PollByte_kb1000(1
1,
000 kBytes),
PollByte_kb2000~1
PollByte_kb1250(1
2,
250 kBytes),
PollByte_kb3000~1
PollByte_kb1500(1
3,
500 kBytes),
PollByte_infinity~14
PollByte_kb2000(2
000 kBytes),
PollByte_kb3000(3
000 kBytes),
PollByte_infinity(infi
nite kBytes)
 PollPdu_p4(4
PDUs),
PollPdu_p8(8
PDUs),
PollPdu_p16(16 PollPdu_p4~0,
PDUs), PollPdu_p8~1,
PollPdu_p32(32 PollPdu_p16~2,
Radio Bearer PDUs), PollPdu_p32~3,
Enumeration Type None
Management PollPdu_p64(64 PollPdu_p64~4,
PDUs), PollPdu_p128~5,
PollPdu_p128(128 PollPdu_p256~6,
PDUs), PollPdu_Infinity~7
PollPdu_p256(256
PDUs),
PollPdu_Infinity(infi
nite PDUs)
 PollPdu_p4(4
PDUs),
PollPdu_p8(8
PDUs),
PollPdu_p16(16 PollPdu_p4~0,
PDUs), PollPdu_p8~1,
PollPdu_p32(32 PollPdu_p16~2,
Radio Bearer PDUs), PollPdu_p32~3,
Enumeration Type None
Management PollPdu_p64(64 PollPdu_p64~4,
PDUs), PollPdu_p128~5,
PollPdu_p128(128 PollPdu_p256~6,
PDUs), PollPdu_Infinity~7
PollPdu_p256(256
PDUs),
PollPdu_Infinity(infi
nite PDUs)
 5), 8,
Tpollretrans_m100( Tpollretrans_m100~
100), 19,
Tpollretrans_m105( Tpollretrans_m105~
105), 20,
Tpollretrans_m110( Tpollretrans_m110~
110), 21,
Tpollretrans_m115( Tpollretrans_m115~
115), 22,
Tpollretrans_m120( Tpollretrans_m120~
120), 23,
Tpollretrans_m125( Tpollretrans_m125~
125), 24,
Tpollretrans_m130( Tpollretrans_m130~
130), 25,
Tpollretrans_m135( Tpollretrans_m135~
135), 26,
Tpollretrans_m140( Tpollretrans_m140~
Radio Bearer
Enumeration Type 140), 27, ms
Management
Tpollretrans_m145( Tpollretrans_m145~
145), 28,
Tpollretrans_m150( Tpollretrans_m150~
150), 29,
Tpollretrans_m155( Tpollretrans_m155~
155), 30,
Tpollretrans_m160( Tpollretrans_m160~
160), 31,
Tpollretrans_m165( Tpollretrans_m165~
165), 32,
Tpollretrans_m170( Tpollretrans_m170~
170), 33,
Tpollretrans_m175( Tpollretrans_m175~
175), 34,
Tpollretrans_m180( Tpollretrans_m180~
180), 35,
Tpollretrans_m185( Tpollretrans_m185~
185), 36,
 5), 8,
Tpollretrans_m100( Tpollretrans_m100~
100), 19,
Tpollretrans_m105( Tpollretrans_m105~
105), 20,
Tpollretrans_m110( Tpollretrans_m110~
110), 21,
Tpollretrans_m115( Tpollretrans_m115~
115), 22,
Tpollretrans_m120( Tpollretrans_m120~
120), 23,
Tpollretrans_m125( Tpollretrans_m125~
125), 24,
Tpollretrans_m130( Tpollretrans_m130~
130), 25,
Tpollretrans_m135( Tpollretrans_m135~
135), 26,
Tpollretrans_m140( Tpollretrans_m140~
Radio Bearer
Enumeration Type 140), 27, ms
Management
Tpollretrans_m145( Tpollretrans_m145~
145), 28,
Tpollretrans_m150( Tpollretrans_m150~
150), 29,
Tpollretrans_m155( Tpollretrans_m155~
155), 30,
Tpollretrans_m160( Tpollretrans_m160~
160), 31,
Tpollretrans_m165( Tpollretrans_m165~
165), 32,
Tpollretrans_m170( Tpollretrans_m170~
170), 33,
Tpollretrans_m175( Tpollretrans_m175~
175), 34,
Tpollretrans_m180( Tpollretrans_m180~
180), 35,
Tpollretrans_m185( Tpollretrans_m185~
185), 36,
 Tstatprohibit_m95(9 Tstatprohibit_m95~
5), 19,
Tstatprohibit_m100( Tstatprohibit_m100
100), ~20,
Tstatprohibit_m105( Tstatprohibit_m105
105), ~21,
Tstatprohibit_m110( Tstatprohibit_m110~
110), 22,
Tstatprohibit_m115( Tstatprohibit_m115~
115), 23,
Tstatprohibit_m120( Tstatprohibit_m120
120), ~24,
Tstatprohibit_m125( Tstatprohibit_m125
125), ~25,
Tstatprohibit_m130( Tstatprohibit_m130
130), ~26,
Tstatprohibit_m135( Tstatprohibit_m135
135), ~27,
Radio Bearer Tstatprohibit_m140( Tstatprohibit_m140
Enumeration Type ms
Management 140), ~28,
Tstatprohibit_m145( Tstatprohibit_m145
145), ~29,
Tstatprohibit_m150( Tstatprohibit_m150
150), ~30,
Tstatprohibit_m155( Tstatprohibit_m155
155), ~31,
Tstatprohibit_m160( Tstatprohibit_m160
160), ~32,
Tstatprohibit_m165( Tstatprohibit_m165
165), ~33,
Tstatprohibit_m170( Tstatprohibit_m170
170), ~34,
Tstatprohibit_m175( Tstatprohibit_m175
175), ~35,
Tstatprohibit_m180( Tstatprohibit_m180
180), ~36,
Tstatprohibit_m185( Tstatprohibit_m185
185), ~37,
 Tstatprohibit_m95(9 Tstatprohibit_m95~
5), 19,
Tstatprohibit_m100( Tstatprohibit_m100
100), ~20,
Tstatprohibit_m105( Tstatprohibit_m105
105), ~21,
Tstatprohibit_m110( Tstatprohibit_m110~
110), 22,
Tstatprohibit_m115( Tstatprohibit_m115~
115), 23,
Tstatprohibit_m120( Tstatprohibit_m120
120), ~24,
Tstatprohibit_m125( Tstatprohibit_m125
125), ~25,
Tstatprohibit_m130( Tstatprohibit_m130
130), ~26,
Tstatprohibit_m135( Tstatprohibit_m135
135), ~27,
Radio Bearer Tstatprohibit_m140( Tstatprohibit_m140
Enumeration Type ms
Management 140), ~28,
Tstatprohibit_m145( Tstatprohibit_m145
145), ~29,
Tstatprohibit_m150( Tstatprohibit_m150
150), ~30,
Tstatprohibit_m155( Tstatprohibit_m155
155), ~31,
Tstatprohibit_m160( Tstatprohibit_m160
160), ~32,
Tstatprohibit_m165( Tstatprohibit_m165
165), ~33,
Tstatprohibit_m170( Tstatprohibit_m170
170), ~34,
Tstatprohibit_m175( Tstatprohibit_m175
175), ~35,
Tstatprohibit_m180( Tstatprohibit_m180
180), ~36,
Tstatprohibit_m185( Tstatprohibit_m185
185), ~37,
 0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
0), ,
Treordering_m45(4 Treordering_m45~9
5), ,
Treordering_m50(5 Treordering_m50~1
0), 0,
Treordering_m55(5 Treordering_m55~1
5), 1,
Treordering_m60(6 Treordering_m60~1
0), 2,
Treordering_m65(6 Treordering_m65~1
5), 3,
Treordering_m70(7 Treordering_m70~1
0), 4,
Treordering_m75(7 Treordering_m75~1
Radio Bearer 5), 5,
Enumeration Type ms
Management Treordering_m80(8 Treordering_m80~1
0), 6,
Treordering_m85(8 Treordering_m85~1
5), 7,
Treordering_m90(9 Treordering_m90~1
0), 8,
Treordering_m95(9 Treordering_m95~1
5), 9,
Treordering_m100( Treordering_m100~
100), 20,
Treordering_m110(1 Treordering_m110~
10), 21,
Treordering_m120( Treordering_m120~
120), 22,
Treordering_m130( Treordering_m130~
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~
 0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
0), ,
Treordering_m45(4 Treordering_m45~9
5), ,
Treordering_m50(5 Treordering_m50~1
0), 0,
Treordering_m55(5 Treordering_m55~1
5), 1,
Treordering_m60(6 Treordering_m60~1
0), 2,
Treordering_m65(6 Treordering_m65~1
5), 3,
Treordering_m70(7 Treordering_m70~1
0), 4,
Treordering_m75(7 Treordering_m75~1
Radio Bearer 5), 5,
Enumeration Type ms
Management Treordering_m80(8 Treordering_m80~1
0), 6,
Treordering_m85(8 Treordering_m85~1
5), 7,
Treordering_m90(9 Treordering_m90~1
0), 8,
Treordering_m95(9 Treordering_m95~1
5), 9,
Treordering_m100( Treordering_m100~
100), 20,
Treordering_m110(1 Treordering_m110~
10), 21,
Treordering_m120( Treordering_m120~
120), 22,
Treordering_m130( Treordering_m130~
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~

QCI1(QCI 1),
QCI2(QCI 2),
Dynamic QCI3(QCI 3), QCI1~1, QCI2~2,
Scheduling QCI4(QCI 4), QCI3~3, QCI4~4,
Basic Scheduling Enumeration Type QCI5(QCI 5), QCI5~5, QCI6~6, None
Enhanced QCI6(QCI 6), QCI7~7, QCI8~8,
Scheduling QCI7(QCI 7), QCI9~9
QCI8(QCI 8),
QCI9(QCI 9)
Dynamic
Scheduling
Transport Interval Type 1~1000 N/A None
Differentiated Flow
Control

Dynamic
Interval Type 1~1000 N/A None
Scheduling

MinGbrRate_0_KB( MinGbrRate_0_KB
0kB/s), ~0,
MinGbrRate_1_KB( MinGbrRate_1_KB
1kB/s), ~8000,
MinGbrRate_2_KB( MinGbrRate_2_KB
Dynamic 2kB/s), ~16000,
Scheduling MinGbrRate_4_KB( MinGbrRate_4_KB
Transport 4kB/s), ~32000,
Overbooking MinGbrRate_8_KB( MinGbrRate_8_KB
Transport 8kB/s), ~64000,
Differentiated Flow MinGbrRate_16_K MinGbrRate_16_K
Enumeration Type kB/s
Control B(16kB/s), B~128000,
Transport Resource MinGbrRate_32_K MinGbrRate_32_K
Overload Control B(32kB/s), B~256000,
Basic Scheduling MinGbrRate_64_K MinGbrRate_64_K
Enhanced B(64kB/s), B~512000,
Scheduling MinGbrRate_128_K MinGbrRate_128_K
B(128kB/s), B~1024000,
MinGbrRate_256_K MinGbrRate_256_K
B(256kB/s), B~2048000,
MinGbrRate_512_K MinGbrRate_512_K
B(512kB/s) B~4096000
 MinGbrRate_0_KB( MinGbrRate_0_KB
0kB/s), ~0,
MinGbrRate_1_KB( MinGbrRate_1_KB
1kB/s), ~8000,
MinGbrRate_2_KB( MinGbrRate_2_KB
2kB/s), ~16000,
MinGbrRate_4_KB( MinGbrRate_4_KB
Dynamic
4kB/s), ~32000,
Scheduling
MinGbrRate_8_KB( MinGbrRate_8_KB
Transport
8kB/s), ~64000,
Overbooking
MinGbrRate_16_K MinGbrRate_16_K
Transport Resource Enumeration Type kB/s
B(16kB/s), B~128000,
Overload Control
MinGbrRate_32_K MinGbrRate_32_K
Different Transport
B(32kB/s), B~256000,
Paths based on
MinGbrRate_64_K MinGbrRate_64_K
QoS Grade
B(64kB/s), B~512000,
MinGbrRate_128_K MinGbrRate_128_K
B(128kB/s), B~1024000,
MinGbrRate_256_K MinGbrRate_256_K
B(256kB/s), B~2048000,
MinGbrRate_512_K MinGbrRate_512_K
B(512kB/s) B~4096000

Dynamic
Scheduling
Interval Type 0~10 N/A None
Enhanced
Scheduling
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type 0~39 N/A None
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
Dynamic
Scheduling
Basic Scheduling Interval Type 0~39 N/A None
Enhanced
Scheduling

PBR_0_KBps(0kB/
s),
PBR_8_KBps(8kB/
s),
PBR_16_KBps(16k PBR_0_KBps~0,
B/s), PBR_8_KBps~1,
Dynamic
PBR_32_KBps(32k PBR_16_KBps~2,
Scheduling
B/s), PBR_32_KBps~3,
Basic Scheduling Enumeration Type kB/s
PBR_64_KBps(64k PBR_64_KBps~4,
Enhanced
B/s), PBR_128_KBps~5,
Scheduling
PBR_128_KBps(12 PBR_256_KBps~6,
8kB/s), PBR_INFINITY~7
PBR_256_KBps(25
6kB/s),
PBR_INFINITY(Infi
nity)
Dynamic
Scheduling
Basic Scheduling Interval Type 4~16 N/A None
Enhanced
Scheduling

Transport
Overbooking
Transport
Differentiated Flow FLOW_CTRL(Flow
FLOW_CTRL~0,
Control Control),
Enumeration Type NON_FLOW_CTRL None
Transport Resource NON_FLOW_CTRL
~1
Overload Control (Non Flow Control)
Different Transport
Paths based on
QoS Grade
None Interval Type 1~9 N/A None

arameter0_bit10), ~6,
RsvdSwPara0_bit1 RsvdSwPara0_bit8
1(ReservedSwitchP ~7,
arameter0_bit11), RsvdSwPara0_bit9
RsvdSwPara0_bit1 ~8,
2(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit12), 0~9,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
3(ReservedSwitchP 1~10,
arameter0_bit13), RsvdSwPara0_bit1
RsvdSwPara0_bit1 2~11,
4(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit14), 3~12,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
5(ReservedSwitchP 4~13,
arameter0_bit15), RsvdSwPara0_bit1
RsvdSwPara0_bit1 5~14,
6(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit16), 6~15,
None Bit Field Type None
RsvdSwPara0_bit1 RsvdSwPara0_bit1
7(ReservedSwitchP 7~16,
arameter0_bit17), RsvdSwPara0_bit1
RsvdSwPara0_bit1 8~17,
8(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit18), 9~18,
RsvdSwPara0_bit1 RsvdSwPara0_bit2
9(ReservedSwitchP 0~19,
arameter0_bit19), RsvdSwPara0_bit2
RsvdSwPara0_bit2 1~20,
0(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit20), 2~21,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
1(ReservedSwitchP 3~22,
arameter0_bit21), RsvdSwPara0_bit2
RsvdSwPara0_bit2 4~23,
2(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit22), 5~24,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
 arameter1_bit10), ~6,
RsvdSwPara1_bit1 RsvdSwPara1_bit8
1(ReservedSwitchP ~7,
arameter1_bit11), RsvdSwPara1_bit9
RsvdSwPara1_bit1 ~8,
2(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit12), 0~9,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
3(ReservedSwitchP 1~10,
arameter1_bit13), RsvdSwPara1_bit1
RsvdSwPara1_bit1 2~11,
4(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit14), 3~12,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
5(ReservedSwitchP 4~13,
arameter1_bit15), RsvdSwPara1_bit1
RsvdSwPara1_bit1 5~14,
6(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit16), 6~15,
None Bit Field Type None
RsvdSwPara1_bit1 RsvdSwPara1_bit1
7(ReservedSwitchP 7~16,
arameter1_bit17), RsvdSwPara1_bit1
RsvdSwPara1_bit1 8~17,
8(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit18), 9~18,
RsvdSwPara1_bit1 RsvdSwPara1_bit2
9(ReservedSwitchP 0~19,
arameter1_bit19), RsvdSwPara1_bit2
RsvdSwPara1_bit2 1~20,
0(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit20), 2~21,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
1(ReservedSwitchP 3~22,
arameter1_bit21), RsvdSwPara1_bit2
RsvdSwPara1_bit2 4~23,
2(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit22), 5~24,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
 arameter2_bit10), ~6,
RsvdSwPara2_bit1 RsvdSwPara2_bit8
1(ReservedSwitchP ~7,
arameter2_bit11), RsvdSwPara2_bit9
RsvdSwPara2_bit1 ~8,
2(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit12), 0~9,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
3(ReservedSwitchP 1~10,
arameter2_bit13), RsvdSwPara2_bit1
RsvdSwPara2_bit1 2~11,
4(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit14), 3~12,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
5(ReservedSwitchP 4~13,
arameter2_bit15), RsvdSwPara2_bit1
RsvdSwPara2_bit1 5~14,
6(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit16), 6~15,
None Bit Field Type None
RsvdSwPara2_bit1 RsvdSwPara2_bit1
7(ReservedSwitchP 7~16,
arameter2_bit17), RsvdSwPara2_bit1
RsvdSwPara2_bit1 8~17,
8(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit18), 9~18,
RsvdSwPara2_bit1 RsvdSwPara2_bit2
9(ReservedSwitchP 0~19,
arameter2_bit19), RsvdSwPara2_bit2
RsvdSwPara2_bit2 1~20,
0(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit20), 2~21,
RsvdSwPara2_bit2 RsvdSwPara2_bit2
1(ReservedSwitchP 3~22,
arameter2_bit21), RsvdSwPara2_bit2
RsvdSwPara2_bit2 4~23,
2(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit22), 5~24,
RsvdSwPara2_bit2 RsvdSwPara2_bit2

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

Basic Scheduling
Dynamic
Scheduling
Single Streaming Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Beamforming
Dual Streaming
Beamforming
 ms2(2ms),
ms2~2, ms5~5,
ms5(5ms),
ms10~10,
Basic Scheduling ms10(10ms),
ms20~20,
Dynamic Enumeration Type ms20(20ms), ms
ms40~40,
Scheduling ms40(40ms),
ms80~80,
ms80(80ms),
ms160~160
ms160(160ms)

AMC
CQI Adjustment
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Enhanced
Scheduling
Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
Basic Scheduling
Dynamic Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Scheduling
AMC
CQI Adjustment
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Enhanced
Scheduling

Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
 ms5(5ms),
ms10(10ms),
ms5~1, ms10~2,
ms20(20ms),
Physical Channel ms20~3, ms40~4,
Enumeration Type ms40(40ms), ms
Management ms80~5, ms160~6,
ms80(80ms),
ms320~7
ms160(160ms),
ms320(320ms)

Terminal Awareness
Interval Type 0~99999999 N/A None
Differentiation

Terminal Awareness NOT_CFG(NOT_C NOT_CFG~0,

Enumeration Type None
Differentiation FG), CFG(CFG) CFG~1

Terminal Awareness
Interval Type 0~99 N/A None
Differentiation
Carrier Aggregation TCH_OFF(GERAN
for Downlink 2CC in _ANR_SWITCH_O
20MHz FF),
Carrier Aggregation CDMA_ANR_SWIT LTE_ANR_SWITCH
for Downlink 2CC in CH_OFF(CDMA_A _OFF~0,
40MHz NR_SWITCH_OFF) UTRAN_ANR_SWI
Flexible CA from , TCH_OFF~1,
Multiple Carriers DYNAMIC_DRX_S GERAN_ANR_SWI
Carrier Aggregation WITCH_OFF(DYNA TCH_OFF~2,
for 2CC based on MIC_DRX_SWITC CDMA_ANR_SWIT
Coordinated BBU H_OFF), CH_OFF~3,
Carrier Aggregation CA_SWITCH_OFF( DYNAMIC_DRX_S
for Downlink 3CC in CA_SWITCH_OFF) WITCH_OFF~4,
40MHz , CA_SWITCH_OFF
Carrier Aggregation TTI_BUNDLING_S ~5,
for Downlink 3CC in WITCH_OFF(TTI_B TTI_BUNDLING_S
60MHz UNDLING_SWITC WITCH_OFF~6,
Carrier Aggregation H_OFF), MIMO_TM_MODE_
for Uplink 2CC MIMO_TM_MODE_ SET~7,
Bit Field Type None
[Trial] SET(MIMO_TM_M APERIODIC_CQI_
TTI Bundling ODE_SET), RPT_SWITCH_OF
DL 2x2 MIMO APERIODIC_CQI_ F~8,
DL 4x2 MIMO RPT_SWITCH_OF ROHC_SWITCH_O
DL 4x4 MIMO F(APERIODIC_CQI FF~9,
Support of _RPT_SWITCH_O DL_2CC_CA_ENH
aperiodic CQI FF), ANCE_SWITCH_O
reports ROHC_SWITCH_O FF~10,
RObust Header FF(ROHC_SWITC DRX_SWITCH_OF
Compression H_OFF), F~11,
(ROHC) DL_2CC_CA_ENH OSS_INTER_RAT_
Automatic ANCE_SWITCH_O MR_SWITH_OFF~
Neighbour Relation FF(DL_2CC_CA_E 12,
(ANR) NHANCE_SWITCH OSS_INTER_FRE
Inter-RAT ANR _OFF), Q_MR_SWITH_OF
Dynamic DRX DRX_SWITCH_OF F~13
Carrier Aggregation F(DRX_SWITCH_O
for Downlink 2CC in FF),
40MHz OSS_INTER_RAT_

Terminal Awareness
String Type 0~80 characters N/A None
Differentiation
 RANK_DETECT_S
Terminal Awareness RANK_DETECT_S
Bit Field Type WITCH_ON(Rank None
Differentiation WITCH_ON~0
Detect Switch On)

QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3), QCI1~1, QCI2~2,
QCI4(QCI 4), QCI3~3, QCI4~4,
None Enumeration Type QCI5(QCI 5), QCI5~5, QCI6~6, None
QCI6(QCI 6), QCI7~7, QCI8~8,
QCI7(QCI 7), QCI9~9
QCI8(QCI 8),
QCI9(QCI 9)
 TPeriodBSRTimer_
sf5(5 subframes),
TPeriodBSRTimer_
sf10(10 subframes),
TPeriodBSRTimer_
TPeriodBSRTimer_
sf5~0,
sf16(16 subframes),
TPeriodBSRTimer_
TPeriodBSRTimer_
sf10~1,
sf20(20 subframes),
TPeriodBSRTimer_
TPeriodBSRTimer_
sf16~2,
sf32(32 subframes),
TPeriodBSRTimer_
TPeriodBSRTimer_
sf20~3,
sf40(40 subframes),
TPeriodBSRTimer_
TPeriodBSRTimer_
sf32~4,
sf64(64 subframes),
TPeriodBSRTimer_
TPeriodBSRTimer_
sf40~5,
sf80(80 subframes),
TPeriodBSRTimer_
TPeriodBSRTimer_
sf64~6,
sf128(128
TPeriodBSRTimer_
None Enumeration Type subframes), subframe
sf80~7,
TPeriodBSRTimer_
TPeriodBSRTimer_
sf160(160
sf128~8,
subframes),
TPeriodBSRTimer_
TPeriodBSRTimer_
sf160~9,
sf320(320
TPeriodBSRTimer_
subframes),
sf320~10,
TPeriodBSRTimer_
TPeriodBSRTimer_
sf640(640
sf640~11,
subframes),
TPeriodBSRTimer_
TPeriodBSRTimer_
sf1280~12,
sf1280(1280
TPeriodBSRTimer_
subframes),
sf2560~13,
TPeriodBSRTimer_
TPeriodBSRTimer_i
sf2560(2560
nfinity~14
subframes),
TPeriodBSRTimer_i
nfinity(infinity
subframes)
sf320(sf320),
sf320~0, sf640~1,
sf640(sf640),
sf1280~2,
sf1280(sf1280),
None Enumeration Type sf2560~3, subframe
sf2560(sf2560),
sf5120~4,
sf5120(sf5120),
sf10240~5
sf10240(sf10240)
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Mobility
Management
Distance Based
Inter-frequency
Handover
GAP_PATTERN_T GAP_PATTERN_T
Service Based
YPE_1, YPE_1~1,
Inter-frequency Enumeration Type None
GAP_PATTERN_T GAP_PATTERN_T
Handover
YPE_2 YPE_2~2
SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN

Coverage Based
Intra-frequency
FC0~0, FC1~1,
Handover
FC2~2, FC3~3,
Coverage Based
FC0, FC1, FC2, FC4~4, FC5~5,
Inter-frequency
FC3, FC4, FC5, FC6~6, FC7~7,
Handover
Enumeration Type FC6, FC7, FC8, FC8~8, FC9~9, None
Distance Based
FC9, FC11, FC13, FC11~10,
Inter-frequency
FC15, FC17, FC19 FC13~11,
Handover
FC15~12,
Service Based
FC17~13, FC19~14
Inter-frequency
Handover
Coverage Based
Intra-frequency FC0~0, FC1~1,
Handover FC2~2, FC3~3,
Coverage Based FC0, FC1, FC2, FC4~4, FC5~5,
Inter-frequency FC3, FC4, FC5, FC6~6, FC7~7,
Handover Enumeration Type FC6, FC7, FC8, FC8~8, FC9~9, None
Distance Based FC9, FC11, FC13, FC11~10,
Inter-frequency FC15, FC17, FC19 FC13~11,
Handover FC15~12,
Service Based FC17~13, FC19~14
Inter-frequency

PS Inter-RAT FC0~0, FC1~1,

Mobility between E- FC2~2, FC3~3,
UTRAN and FC0, FC1, FC2, FC4~4, FC5~5,
GERAN FC3, FC4, FC5, FC6~6, FC7~7,
SRVCC to GERAN Enumeration Type FC6, FC7, FC8, FC8~8, FC9~9, None
CS Fallback to FC9, FC11, FC13, FC11~10,
GERAN FC15, FC17, FC19 FC13~11,
Flash CS Fallback FC15~12,
to GERAN FC17~13, FC19~14
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Mobility
Management NOT_CFG~0,
Enumeration Type NOT_CFG, CFG None
Distance Based CFG~1
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
SRVCC to UTRAN
SRVCC to GERAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Interval Type -140~-43 N/A dBm
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
Mobility
Management
SRVCC to UTRAN
SRVCC to GERAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Mobility
Management
Distance Based NOT_CFG~0,
Enumeration Type NOT_CFG, CFG None
Inter-frequency CFG~1
Handover
Service Based
Inter-frequency
Handover
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and T_CRMAX_30S(30
GERAN s),
T_CRMAX_30S~0,
Mobility T_CRMAX_60S(60
T_CRMAX_60S~1,
Management s),
T_CRMAX_120S~2
Distance Based T_CRMAX_120S(1
Enumeration Type , s
Inter-frequency 20s),
T_CRMAX_180S~3
Handover T_CRMAX_180S(1
,
Service Based 80s),
T_CRMAX_240S~4
Inter-frequency T_CRMAX_240S(2
Handover 40s)
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and T_CRMAXHYST_3 T_CRMAXHYST_3
GERAN 0S(30s), 0S~0,
Mobility T_CRMAXHYST_6 T_CRMAXHYST_6
Management 0S(60s), 0S~1,
Distance Based T_CRMAXHYST_1 T_CRMAXHYST_1
Enumeration Type s
Inter-frequency 20S(120s), 20S~2,
Handover T_CRMAXHYST_1 T_CRMAXHYST_1
Service Based 80S(180s), 80S~3,
Inter-frequency T_CRMAXHYST_2 T_CRMAXHYST_2
Handover 40S(240s) 40S~4
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Mobility
Management
Distance Based
Interval Type 1~16 N/A None
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Mobility
Management
Distance Based
Interval Type 1~16 N/A None
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
Mobility 0DOT25(0.25), 0DOT25~0,
Management TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
Distance Based 0DOT50(0.5), 0DOT50~1,
Enumeration Type None
Inter-frequency TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
Handover 0DOT75(0.75), 0DOT75~2,
Service Based TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
Inter-frequency LDOT0(1) LDOT0~3
Handover
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN TTT_SF_HIGH_0D TTT_SF_HIGH_0D
Mobility OT25(0.25), OT25~0,
Management TTT_SF_HIGH_0D TTT_SF_HIGH_0D
Distance Based OT50(0.5), OT50~1,
Enumeration Type None
Inter-frequency TTT_SF_HIGH_0D TTT_SF_HIGH_0D
Handover OT75(0.75), OT75~2,
Service Based TTT_SF_HIGH_LD TTT_SF_HIGH_LD
Inter-frequency OT0(1) OT0~3
Handover
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN

FC0~0, FC1~1,
PS Inter-RAT FC2~2, FC3~3,
Mobility between E- FC0, FC1, FC2, FC4~4, FC5~5,
UTRAN and FC3, FC4, FC5, FC6~6, FC7~7,
UTRAN Enumeration Type FC6, FC7, FC8, FC8~8, FC9~9, None
SRVCC to UTRAN FC9, FC11, FC13, FC11~10,
CS Fallback to FC15, FC17, FC19 FC13~11,
UTRAN FC15~12,
FC17~13, FC19~14
 FC0~0, FC1~1,
PS Inter-RAT FC2~2, FC3~3,
Mobility between E- FC0, FC1, FC2, FC4~4, FC5~5,
UTRAN and FC3, FC4, FC5, FC6~6, FC7~7,
UTRAN Enumeration Type FC6, FC7, FC8, FC8~8, FC9~9, None
SRVCC to UTRAN FC9, FC11, FC13, FC11~10,
CS Fallback to FC15, FC17, FC19 FC13~11,
UTRAN FC15~12,
FC17~13, FC19~14

Service Based
Inter-frequency
Handover
Service based inter-
RAT handover to
UTRAN Interval Type 0~20 N/A 30s
Service based inter-
RAT handover to
GERAN
Camp & Handover
Based on SPID
Enhanced CS
Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 Interval Type 1~8 N/A None
SRVCC to UTRAN
SRVCC to GERAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN

Enhanced CS
Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
r1(1), r2(2), r4(4),
UTRAN and r1~0, r2~1, r4~2,
r8(8), r16(16),
CDMA2000 Enumeration Type r8~3, r16~4, r32~5, None
r32(32), r64(64),
SRVCC to UTRAN r64~6, Infinity~7
Infinity(Infinity)
SRVCC to GERAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
120ms~0,
CDMA2000
240ms~1,
SRVCC to GERAN
480ms~2,
CS Fallback to
120ms, 240ms, 640ms~3,
UTRAN
480ms, 640ms, 1024ms~4,
CS Fallback to
1024ms, 2048ms, 2048ms~5,
GERAN Enumeration Type None
5120ms, 10240ms, 5120ms~6,
CS Fallback to
1min, 6min, 12min, 10240ms~7,
CDMA2000 1xRTT
30min, 60min 1min~8, 6min~9,
PS Inter-RAT
12min~10,
Mobility between E-
30min~11,
UTRAN and
60min~12
UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
RSCP, ECN0, RSCP~0, ECN0~1,
UTRAN Enumeration Type None
BOTH BOTH~2
SRVCC to UTRAN
CS Fallback to
UTRAN

120ms~0,
240ms~1,
480ms~2,
PS Inter-RAT
120ms, 240ms, 640ms~3,
Mobility between E-
480ms, 640ms, 1024ms~4,
UTRAN and
1024ms, 2048ms, 2048ms~5,
UTRAN Enumeration Type None
5120ms, 10240ms, 5120ms~6,
SRVCC to UTRAN
1min, 6min, 12min, 10240ms~7,
CS Fallback to
30min, 60min 1min~8, 6min~9,
UTRAN
12min~10,
30min~11,
60min~12
Enhanced CS
Fallback to PILOT_STRENGTH
PILOT_STRENGTH
CDMA2000 1xRTT ~0,
,
PS Inter-RAT Enumeration Type PILOT_PN_PHASE None
PILOT_PN_PHASE
Mobility between E- _AND_STRENGTH
_AND_STRENGTH
UTRAN and ~1
CDMA2000

120ms~0,
240ms~1,
480ms~2,
Enhanced CS
120ms, 240ms, 640ms~3,
Fallback to
480ms, 640ms, 1024ms~4,
CDMA2000 1xRTT
1024ms, 2048ms, 2048ms~5,
PS Inter-RAT Enumeration Type None
5120ms, 10240ms, 5120ms~6,
Mobility between E-
1min, 6min, 12min, 10240ms~7,
UTRAN and
30min, 60min 1min~8, 6min~9,
CDMA2000
12min~10,
30min~11,
60min~12

PS Inter-RAT
Mobility between E- PILOT_STRENGTH
Enumeration Type PILOT_STRENGTH None
UTRAN and ~0
CDMA2000
 120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3,
PS Inter-RAT 480ms, 640ms, 1024ms~4,
Mobility between E- 1024ms, 2048ms, 2048ms~5,
Enumeration Type None
UTRAN and 5120ms, 10240ms, 5120ms~6,
CDMA2000 1min, 6min, 12min, 10240ms~7,
30min, 60min 1min~8, 6min~9,
12min~10,
30min~11,
60min~12

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and RSRP, RSRQ, RSRP~0, RSRQ~1,
Enumeration Type None
GERAN BOTH BOTH~2
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and EventB1(EventB1), EventB1~0,
Enumeration Type None
GERAN EventB2(EventB2) EventB2~1
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN

Enhanced CS
Fallback to Interval Type 1~65535 N/A ms
CDMA2000 1xRTT

Enhanced CS
Fallback to Interval Type 1~6 N/A None
CDMA2000 1xRTT

PS Mobility from E-
UTRAN to
CDMA2000 HRPD
Based on
Frequency-specific
Factors BY_PRIORITY, BY_PRIORITY~0,
Enhanced CS Enumeration Type BY_SELECT_RATI BY_SELECT_RATI None
Fallback to O O~1
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000

CS Fallback to
CDMA2000 1xRTT BY_PRIORITY, BY_PRIORITY~0,
Based on Enumeration Type BY_SELECT_RATI BY_SELECT_RATI None
Frequency-specific O O~1
Factors
Enhanced CS
NONE, NONE~0,
Fallback to Enumeration Type None
REDIRECTION REDIRECTION~1
CDMA2000 1xRTT

Enhanced CS
PERIOD~0,
Fallback to Enumeration Type PERIOD, EVENT None
EVENT~1
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT FIXED, FIXED~0,
Enhanced CS Enumeration Type BY_MEAS_RESUL BY_MEAS_RESUL None
Fallback to T T~1
CDMA2000 1xRTT

PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type 1~16 N/A None
UTRAN
Flash CS Fallback
to UTRAN

PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type 1~32 N/A None
GERAN
Flash CS Fallback
to GERAN

CS Fallback to
Interval Type 0~32 N/A None
GERAN
CS Fallback to
UTRAN
Interval Type 0~16 N/A None
Flash CS Fallback
to UTRAN

BY_RATIO(BY_RA
TIO), BY_RATIO~0,
Mobility
Enumeration Type BY_MEAS_RESUL BY_MEAS_RESUL None
Management
T(BY_MEAS_RES T~1
ULT)
CS Fallback to
UTRAN
CS Fallback to
GERAN
PS Inter-RAT
Mobility between E-
Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN

Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility
Interval Type 1~8 N/A None
Management
SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover r1(1), r2(2), r4(4),
r1~0, r2~1, r4~2,
Mobility r8(8), r16(16),
Enumeration Type r8~3, r16~4, r32~5, None
Management r32(32), r64(64),
r64~6, Infinity~7
SRVCC to UTRAN Infinity(Infinity)
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN

Coverage Based
Intra-frequency Enumeration Type RSRP, RSRQ RSRP~0, RSRQ~1 None
Handover
Coverage Based SAME_AS_TRIG_
SAME_AS_TRIG_
Intra-frequency Enumeration Type QUAN(Same as None
QUAN~0, BOTH~1
Handover Trig Quan), BOTH

120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3,
Coverage Based
480ms, 640ms, 1024ms~4,
Intra-frequency
1024ms, 2048ms, 2048ms~5,
Handover Enumeration Type None
5120ms, 10240ms, 5120ms~6,
Intra-LTE Load
1min, 6min, 12min, 10240ms~7,
Balancing
30min, 60min 1min~8, 6min~9,
12min~10,
30min~11,
60min~12
Coverage Based
Inter-frequency
Handover
Distance Based SAME_AS_TRIG_
SAME_AS_TRIG_
Inter-frequency Enumeration Type QUAN(Same as None
QUAN~0, BOTH~1
Handover Trig Quan), BOTH
Service Based
Inter-frequency
Handover

120ms~0,
240ms~1,
Coverage Based
480ms~2,
Inter-frequency
120ms, 240ms, 640ms~3,
Handover
480ms, 640ms, 1024ms~4,
Distance Based
1024ms, 2048ms, 2048ms~5,
Inter-frequency Enumeration Type None
5120ms, 10240ms, 5120ms~6,
Handover
1min, 6min, 12min, 10240ms~7,
Service Based
30min, 60min 1min~8, 6min~9,
Inter-frequency
12min~10,
Handover
30min~11,
60min~12
Coverage Based
RSRP, RSRQ, RSRP~0, RSRQ~1,
Inter-frequency Enumeration Type None
BOTH BOTH~2
Handover

RSRP, RSRQ, RSRP~0, RSRQ~1,

None Enumeration Type None
BOTH BOTH~2
Coverage Based
Inter-frequency
RSRP, RSRQ, RSRP~0, RSRQ~1,
Handover Enumeration Type None
BOTH BOTH~2
Carrier
Management

Coverage Based
Inter-frequency Interval Type 0~5000 N/A ms
Handover

Coverage Based
RSRP, RSRQ, RSRP~0, RSRQ~1,
Inter-frequency Enumeration Type None
BOTH BOTH~2
Handover

None Interval Type 0~255 N/A None

 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
128ms, 160ms, 256ms~7,
CS Fallback to 256ms, 320ms, 320ms~8,
Enumeration Type ms
UTRAN 480ms, 512ms, 480ms~9,
640ms, 1024ms, 512ms~10,
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15
 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
128ms, 160ms, 256ms~7,
CS Fall Back to 256ms, 320ms, 320ms~8,
Enumeration Type ms
GERAN 480ms, 512ms, 480ms~9,
640ms, 1024ms, 512ms~10,
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15
 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5,
80ms, 100ms, 160ms~6,
Enhanced CS
128ms, 160ms, 256ms~7,
Fallback to
256ms, 320ms, 320ms~8,
CDMA2000 1xRTT Enumeration Type ms
480ms, 512ms, 480ms~9,
CS Fallback
640ms, 1024ms, 512ms~10,
Steering to UTRAN
1280ms, 2560ms, 640ms~11,
5120ms 1024ms~12,
1280ms~13,
2560ms~14,
5120ms~15
CS Fallback to
Interval Type -120~-25 N/A dBm
UTRAN
CS Fallback to
Interval Type -48~0 N/A 0.5dB
UTRAN

CS Fall Back to
Interval Type -110~-48 N/A dBm
GERAN
Enhanced CS
Fallback to
CDMA2000 1xRTT Interval Type -63~0 N/A 0.5dB
CS Fallback
Steering to UTRAN

Flash CS Fallback
to UTRAN
Interval Type -140~-43 N/A dBm
Flash CS Fallback
to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN Interval Type 1~10 N/A s
Enhanced CS
Fallback to
CDMA2000 1xRTT

None Interval Type 0~255 N/A None

 NOT_CFG(Not
Broadcast of NOT_CFG~0,
Enumeration Type configure), None
system information CFG~1
CFG(Configure)
 BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
Emergency Call Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

NOT_CFG(Not
Broadcast of NOT_CFG~0,
Enumeration Type configure), None
system information CFG~1
CFG(Configure)
 P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P00~0, P05~1,
P25(25%),
P10~2, P15~3,
P30(30%),
P20~4, P25~5,
P40(40%),
Broadcast of P30~6, P40~7,
Enumeration Type P50(50%), %
system information P50~8, P60~9,
P60(60%),
P70~10, P75~11,
P70(70%),
P80~12, P85~13,
P75(75%),
P90~14, P95~15
P80(80%),
P85(85%),
P90(90%),
P95(95%)

ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S4~0,
G_TIME_S8(8s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S8~1,
G_TIME_S16(16s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S16~2,
G_TIME_S32(32s),
ACCESS_BARRIN
ACCESS_BARRIN
Broadcast of G_TIME_S32~3,
Enumeration Type G_TIME_S64(64s), s
system information ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S64~4,
G_TIME_S128(128
ACCESS_BARRIN
s),
G_TIME_S128~5,
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S256(256
G_TIME_S256~6,
s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S512~7
G_TIME_S512(512
s)
 BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

NOT_CFG(Not
Broadcast of NOT_CFG~0,
Enumeration Type configure), None
system information CFG~1
CFG(Configure)
 P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P00~0, P05~1,
P25(25%),
P10~2, P15~3,
P30(30%),
P20~4, P25~5,
P40(40%),
Broadcast of P30~6, P40~7,
Enumeration Type P50(50%), %
system information P50~8, P60~9,
P60(60%),
P70~10, P75~11,
P70(70%),
P80~12, P85~13,
P75(75%),
P90~14, P95~15
P80(80%),
P85(85%),
P90(90%),
P95(95%)

ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S4~0,
G_TIME_S8(8s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S8~1,
G_TIME_S16(16s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S16~2,
G_TIME_S32(32s),
ACCESS_BARRIN
ACCESS_BARRIN
Broadcast of G_TIME_S32~3,
Enumeration Type G_TIME_S64(64s), s
system information ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S64~4,
G_TIME_S128(128
ACCESS_BARRIN
s),
G_TIME_S128~5,
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S256(256
G_TIME_S256~6,
s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S512~7
G_TIME_S512(512
s)
 BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

NOT_CFG(Not
Broadcast of NOT_CFG~0,
Enumeration Type configure), None
system information CFG~1
CFG(Configure)
 P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P00~0, P05~1,
P25(25%),
P10~2, P15~3,
P30(30%),
P20~4, P25~5,
P40(40%),
Broadcast of P30~6, P40~7,
Enumeration Type P50(50%), %
system information P50~8, P60~9,
P60(60%),
P70~10, P75~11,
P70(70%),
P80~12, P85~13,
P75(75%),
P90~14, P95~15
P80(80%),
P85(85%),
P90(90%),
P95(95%)

ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S4~0,
G_TIME_S8(8s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S8~1,
G_TIME_S16(16s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S16~2,
G_TIME_S32(32s),
ACCESS_BARRIN
ACCESS_BARRIN
Broadcast of G_TIME_S32~3,
Enumeration Type G_TIME_S64(64s), s
system information ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S64~4,
G_TIME_S128(128
ACCESS_BARRIN
s),
G_TIME_S128~5,
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S256(256
G_TIME_S256~6,
s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S512~7
G_TIME_S512(512
s)
 AC11BARSTATE(A
AC11BARSTATE~0
C11BARSTATE),
,
AC12BARSTATE(A
AC12BARSTATE~1
C12BARSTATE),
,
Broadcast of AC13BARSTATE(A
Bit Field Type AC13BARSTATE~2 None
system information C13BARSTATE),
,
AC14BARSTATE(A
AC14BARSTATE~3
C14BARSTATE),
,
AC15BARSTATE(A
AC15BARSTATE~4
C15BARSTATE)

NOT_CFG(Not
Broadcast of NOT_CFG~0,
Enumeration Type configure), None
system information CFG~1
CFG(Configure)
 P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P00~0, P05~1,
P25(25%),
P10~2, P15~3,
P30(30%),
P20~4, P25~5,
P40(40%),
Broadcast of P30~6, P40~7,
Enumeration Type P50(50%), %
system information P50~8, P60~9,
P60(60%),
P70~10, P75~11,
P70(70%),
P80~12, P85~13,
P75(75%),
P90~14, P95~15
P80(80%),
P85(85%),
P90(90%),
P95(95%)

ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S4~0,
G_TIME_S8(8s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S8~1,
G_TIME_S16(16s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S16~2,
G_TIME_S32(32s),
ACCESS_BARRIN
ACCESS_BARRIN
Broadcast of G_TIME_S32~3,
Enumeration Type G_TIME_S64(64s), s
system information ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S64~4,
G_TIME_S128(128
ACCESS_BARRIN
s),
G_TIME_S128~5,
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S256(256
G_TIME_S256~6,
s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S512~7
G_TIME_S512(512
s)
 AC11BARSTATE(A
AC11BARSTATE~0
C11BARSTATE),
,
AC12BARSTATE(A
AC12BARSTATE~1
C12BARSTATE),
,
Broadcast of AC13BARSTATE(A
Bit Field Type AC13BARSTATE~2 None
system information C13BARSTATE),
,
AC14BARSTATE(A
AC14BARSTATE~3
C14BARSTATE),
,
AC15BARSTATE(A
AC15BARSTATE~4
C15BARSTATE)

NOT_CFG(Not
Broadcast of NOT_CFG~0,
Enumeration Type configure), None
system information CFG~1
CFG(Configure)
 P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P00~0, P05~1,
P25(25%),
P10~2, P15~3,
P30(30%),
P20~4, P25~5,
P40(40%),
Broadcast of P30~6, P40~7,
Enumeration Type P50(50%), %
system information P50~8, P60~9,
P60(60%),
P70~10, P75~11,
P70(70%),
P80~12, P85~13,
P75(75%),
P90~14, P95~15
P80(80%),
P85(85%),
P90(90%),
P95(95%)

ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S4~0,
G_TIME_S8(8s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S8~1,
G_TIME_S16(16s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S16~2,
G_TIME_S32(32s),
ACCESS_BARRIN
ACCESS_BARRIN
Broadcast of G_TIME_S32~3,
Enumeration Type G_TIME_S64(64s), s
system information ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S64~4,
G_TIME_S128(128
ACCESS_BARRIN
s),
G_TIME_S128~5,
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S256(256
G_TIME_S256~6,
s),
ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S512~7
G_TIME_S512(512
s)
 AC11BARSTATE(A
AC11BARSTATE~0
C11BARSTATE),
,
AC12BARSTATE(A
AC12BARSTATE~1
C12BARSTATE),
,
Broadcast of AC13BARSTATE(A
Bit Field Type AC13BARSTATE~2 None
system information C13BARSTATE),
,
AC14BARSTATE(A
AC14BARSTATE~3
C14BARSTATE),
,
AC15BARSTATE(A
AC15BARSTATE~4
C15BARSTATE)
 MMTELVoicePrefer
CfgInd(MMTELVoic MMTELVoicePrefer
ePreferCfgInd), CfgInd~0,
MMTELVideoPrefer MMTELVideoPrefer
AC Barring Skip Bit Field Type None
CfgInd(MMTELVide CfgInd~1,
oPreferCfgInd), SMSPreferCfgInd~
SMSPreferCfgInd(S 2
MSPreferCfgInd)

None Interval Type 0~255 N/A None

Cell Outage
CELL_BARRED(Ba
Detection and CELL_BARRED~0,
rred),
Compensation Enumeration Type CELL_NOT_BARR None
CELL_NOT_BARR
Broadcast of ED~1
ED(Not Barred)
system information
Broadcast of
system information ALLOWED, ALLOWED~0,
Enumeration Type None
Cell Selection and NOT_ALLOWED NOT_ALLOWED~1
Re-selection

RAN Sharing with

Common Carrier NORMAL_MODE(N
Broadcast of ormal mode), NORMAL_MODE~
Enumeration Type None
system information RR_MODE(Round 0, RR_MODE~1
Hybrid RAN Robin Mode)
Sharing

RAN Sharing with

Common Carrier
Broadcast of
Interval Type 1~720 N/A h
system information
Hybrid RAN
Sharing
RAN Sharing with 2000-01-
Common Carrier 01T00:00:00+00:00
Compound Type N/A None
Hybrid RAN ~2099-12-
Sharing 31T23:59:59+00:00

NOT_CFG(Not
NOT_CFG~0,
Dynamic DRX Enumeration Type configure), None
CFG~1
CFG(Configure)
Dynamic DRX Interval Type 1~1000 N/A ms

None Interval Type 0~255 N/A None

Broadcast of
system information
Interval Type 0~65535 N/A None
Cell Selection and
Re-selection
 CELL_RESERVED
_FOR_OP(Reserve CELL_RESERVED
Broadcast of d), _FOR_OP~0,
Enumeration Type None
system information CELL_NOT_RESE CELL_NOT_RESE
RVED_FOR_OP(N RVED_FOR_OP~1
ot Reserved)
RAN Sharing with
Common Carrier
Broadcast of
Interval Type 1~100 N/A %
system information
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
Broadcast of
Interval Type 1~100 N/A %
system information
Hybrid RAN
Sharing
 CELL_MME_CFG_ CELL_MME_CFG_
NUM_0(0), NUM_0~0,
CELL_MME_CFG_ CELL_MME_CFG_
NUM_1(1), NUM_1~1,
CELL_MME_CFG_ CELL_MME_CFG_
S1-flex Enumeration Type None
NUM_2(2), NUM_2~2,
CELL_MME_CFG_ CELL_MME_CFG_
NUM_3(3), NUM_3~3,
CELL_MME_CFG_ CELL_MME_CFG_
NUM_4(4) NUM_4~4
S1-flex Interval Type 0~65535 N/A None
S1-flex Interval Type 0~255 N/A None
S1-flex Interval Type 0~65535 N/A None
S1-flex Interval Type 0~255 N/A None
S1-flex Interval Type 0~65535 N/A None
S1-flex Interval Type 0~255 N/A None
S1-flex Interval Type 0~65535 N/A None
S1-flex Interval Type 0~255 N/A None

Intra-LTE Load
Interval Type 1~100 N/A %
Balancing
Enhanced
Interval Type 1~100 N/A %
Extended QCI

Enhanced
Interval Type 1~100 N/A %
Extended QCI
Enhanced
Interval Type 1~100 N/A %
Extended QCI

Enhanced
Interval Type 1~100 N/A %
Extended QCI

None Interval Type 0~5 N/A None

None Interval Type 0~255 N/A None

DB1_Q_HYST(1dB)
,
DB2_Q_HYST(2dB)
,
DB0_Q_HYST~0,
DB3_Q_HYST(3dB)
DB1_Q_HYST~1,
,
DB2_Q_HYST~2,
DB4_Q_HYST(4dB)
DB3_Q_HYST~3,
,
DB4_Q_HYST~4,
DB5_Q_HYST(5dB)
DB5_Q_HYST~5,
,
DB6_Q_HYST~6,
DB6_Q_HYST(6dB)
DB8_Q_HYST~7,
,
DB10_Q_HYST~8,
Cell Selection and DB8_Q_HYST(8dB)
DB12_Q_HYST~9,
Re-selection ,
Enumeration Type DB14_Q_HYST~10 dB
Broadcast of DB10_Q_HYST(10
,
system information dB),
DB16_Q_HYST~11
DB12_Q_HYST(12
,
dB),
DB18_Q_HYST~12
DB14_Q_HYST(14
,
dB),
DB20_Q_HYST~13
DB16_Q_HYST(16
,
dB),
DB22_Q_HYST~14
DB18_Q_HYST(18
,
dB),
DB24_Q_HYST~15
DB20_Q_HYST(20
dB),
DB22_Q_HYST(22
dB),
Cell Selection and
NOT_CFG(Not
Re-selection NOT_CFG~0,
Enumeration Type configure), None
Broadcast of CFG~1
CFG(Configure)
system information

S30_T_EVALULATI S30_T_EVALULATI
ON(30s), ON~0,
S60_T_EVALULATI S60_T_EVALULATI
Broadcast of ON(60s), ON~1,
system information S120_T_EVALULA S120_T_EVALULA
Enumeration Type s
Cell Selection and TION(120s), TION~2,
Re-selection S180_T_EVALULA S180_T_EVALULA
TION(180s), TION~3,
S240_T_EVALULA S240_T_EVALULA
TION(240s) TION~4
 S30_T_HYST_NOR S30_T_HYST_NOR
MAL(30s), MAL~0,
S60_T_HYST_NOR S60_T_HYST_NOR
Broadcast of MAL(60s), MAL~1,
system information S120_T_HYST_NO S120_T_HYST_NO
Enumeration Type s
Cell Selection and RMAL(120s), RMAL~2,
Re-selection S180_T_HYST_NO S180_T_HYST_NO
RMAL(180s), RMAL~3,
S240_T_HYST_NO S240_T_HYST_NO
RMAL(240s) RMAL~4

Cell Selection and

Re-selection
Interval Type 1~16 N/A None
Broadcast of
system information
Cell Selection and
Re-selection
Interval Type 1~16 N/A None
Broadcast of
system information

DB_6_Q_HYST_SF DB_6_Q_HYST_SF
_MEDIUM(-6dB), _MEDIUM~0,
Broadcast of DB_4_Q_HYST_SF DB_4_Q_HYST_SF
system information _MEDIUM(-4dB), _MEDIUM~1,
Enumeration Type dB
Cell Selection and DB_2_Q_HYST_SF DB_2_Q_HYST_SF
Re-selection _MEDIUM(-2dB), _MEDIUM~2,
DB0_Q_HYST_SF_ DB0_Q_HYST_SF_
MEDIUM(0dB) MEDIUM~3

DB_6_Q_HYST_SF DB_6_Q_HYST_SF
_HIGH(-6dB), _HIGH~0,
Broadcast of DB_4_Q_HYST_SF DB_4_Q_HYST_SF
system information _HIGH(-4dB), _HIGH~1,
Enumeration Type dB
Cell Selection and DB_2_Q_HYST_SF DB_2_Q_HYST_SF
Re-selection _HIGH(-2dB), _HIGH~2,
DB0_Q_HYST_SF_ DB0_Q_HYST_SF_
HIGH(0dB) HIGH~3
Cell Selection and
NOT_CFG(Not
Re-selection NOT_CFG~0,
Enumeration Type configure), None
Broadcast of CFG~1
CFG(Configure)
system information

Cell Selection and

Re-selection
Interval Type 0~31 N/A 2dB
Broadcast of
system information
Cell Selection and
Re-selection
Interval Type 0~31 N/A 2dB
Broadcast of
system information

Cell Selection and

Re-selection
Interval Type 0~7 N/A None
Broadcast of
system information
Cell Selection and
Re-selection
Interval Type -70~-22 N/A 2dBm
Broadcast of
system information

Cell Selection and

NOT_CFG(Not
Re-selection NOT_CFG~0,
Enumeration Type configure), None
Broadcast of CFG~1
CFG(Configure)
system information
Cell Selection and
Re-selection
Interval Type -30~33 N/A dBm
Broadcast of
system information

Cell Selection and

NOT_CFG(Not
Re-selection NOT_CFG~0,
Enumeration Type configure), None
Broadcast of CFG~1
CFG(Configure)
system information

Cell Selection and

Re-selection
Interval Type 0~31 N/A 2dB
Broadcast of
system information

Cell Selection and

NOT_CFG(Not
Re-selection NOT_CFG~0,
Enumeration Type configure), None
Broadcast of CFG~1
CFG(Configure)
system information
 MBW6(1.4M), MBW6~0,
Cell Selection and MBW15(3M), MBW15~1,
Re-selection MBW25(5M), MBW25~2,
Enumeration Type MHz
Broadcast of MBW50(10M), MBW50~3,
system information MBW75(15M), MBW75~4,
MBW100(20M) MBW100~5

Cell Selection and

Re-selection
Interval Type 0~7 N/A s
Broadcast of
system information

Cell Selection and

NOT_CFG(Not
Re-selection NOT_CFG~0,
Enumeration Type configure), None
Broadcast of CFG~1
CFG(Configure)
system information
 T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0,
Cell Selection and T_RESEL_SF_0DO T_RESEL_SF_0DO
Re-selection T5(0.5), T5~1,
Enumeration Type None
Broadcast of T_RESEL_SF_0DO T_RESEL_SF_0DO
system information T75(0.75), T75~2,
T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3

T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0,
Cell Selection and T_RESEL_SF_0DO T_RESEL_SF_0DO
Re-selection T5(0.5), T5~1,
Enumeration Type None
Broadcast of T_RESEL_SF_0DO T_RESEL_SF_0DO
system information T75(0.75), T75~2,
T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3
Cell Selection and BitString00(00), BitString00~0,
Re-selection BitString01(01), BitString01~1,
Enumeration Type None
Broadcast of BitString10(10), BitString10~2,
system information BitString11(11) BitString11~3

Cell Selection and BOOLEAN_FALSE( BOOLEAN_FALSE

Re-selection False), ~0,
Enumeration Type None
Broadcast of BOOLEAN_TRUE( BOOLEAN_TRUE~
system information True) 1
Broadcast of
system information
Interval Type 0~31 N/A dB
Cell Selection and
Re-selection

Broadcast of
system information
Interval Type 0~31 N/A dB
Cell Selection and
Re-selection

Broadcast of
NOT_CFG(Not
system information NOT_CFG~0,
Enumeration Type configure), None
Cell Selection and CFG~1
CFG(Configure)
Re-selection

Broadcast of
system information
Interval Type 0~31 N/A dB
Cell Selection and
Re-selection
Broadcast of
NOT_CFG(Not
system information NOT_CFG~0,
Enumeration Type configure), None
Cell Selection and CFG~1
CFG(Configure)
Re-selection

Broadcast of
system information
Interval Type -34~-3 N/A dB
Cell Selection and
Re-selection
None Interval Type 0~255 N/A None

Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Broadcast of Enumeration Type configure), None
CFG~1
system information CFG(Configure)
Enhanced CS
Fallback to
CDMA2000 1xRTT

Cell Selection and

Re-selection
BOOLEAN_FALSE( BOOLEAN_FALSE
Enhanced CS
False), ~0,
Fallback to Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
CDMA2000 1xRTT
True) 1
Broadcast of
system information

Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E- NOT_CFG(Not
NOT_CFG~0,
UTRAN and Enumeration Type configure), None
CFG~1
CDMA2000 CFG(Configure)
Broadcast of
system information
Enhanced CS
Fallback to
CDMA2000 1xRTT
Cell Selection and
Re-selection
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~15 N/A None
CDMA2000
Broadcast of
system information
Enhanced CS
Fallback to
CDMA2000 1xRTT

Cell Selection and

Re-selection
PS Inter-RAT
NOT_CFG(Not
Mobility between E- NOT_CFG~0,
Enumeration Type configure), None
UTRAN and CFG~1
CFG(Configure)
CDMA2000
Broadcast of
system information

Cell Selection and

Re-selection
PS Inter-RAT
NOT_CFG(Not
Mobility between E- NOT_CFG~0,
Enumeration Type configure), None
UTRAN and CFG~1
CFG(Configure)
CDMA2000
Broadcast of
system information
Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
Interval Type 0~7 N/A s
UTRAN and
CDMA2000
Broadcast of
system information
Cell Selection and
Re-selection
PS Inter-RAT
NOT_CFG(Not
Mobility between E- NOT_CFG~0,
Enumeration Type configure), None
UTRAN and CFG~1
CFG(Configure)
CDMA2000
Broadcast of
system information

Cell Selection and T_RESEL_SF_0DO T_RESEL_SF_0DO

Re-selection T25(0.25), T25~0,
PS Inter-RAT T_RESEL_SF_0DO T_RESEL_SF_0DO
Mobility between E- T5(0.5), T5~1,
Enumeration Type None
UTRAN and T_RESEL_SF_0DO T_RESEL_SF_0DO
CDMA2000 T75(0.75), T75~2,
Broadcast of T_RESEL_SF_1DO T_RESEL_SF_1DO
system information T0(1.0) T0~3
Cell Selection and T_RESEL_SF_0DO T_RESEL_SF_0DO
Re-selection T25(0.25), T25~0,
PS Inter-RAT T_RESEL_SF_0DO T_RESEL_SF_0DO
Mobility between E- T5(0.5), T5~1,
Enumeration Type None
UTRAN and T_RESEL_SF_0DO T_RESEL_SF_0DO
CDMA2000 T75(0.75), T75~2,
Broadcast of T_RESEL_SF_1DO T_RESEL_SF_1DO
system information T0(1.0) T0~3

Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Broadcast of Enumeration Type configure), None
CFG~1
system information CFG(Configure)
Enhanced CS
Fallback to
CDMA2000 1xRTT
Cell Selection and
Re-selection
Enhanced CS NOT_CFG(Not
NOT_CFG~0,
Fallback to Enumeration Type configure), None
CFG~1
CDMA2000 1xRTT CFG(Configure)
Broadcast of
system information

Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Broadcast of Enumeration Type configure), None
CFG~1
system information CFG(Configure)
Enhanced CS
Fallback to
CDMA2000 1xRTT
Cell Selection and
Re-selection
CS Fallback to
CDMA2000 1xRTT
Broadcast of Interval Type 0~7 N/A s
system information
Enhanced CS
Fallback to
CDMA2000 1xRTT

Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Broadcast of Enumeration Type configure), None
CFG~1
system information CFG(Configure)
Enhanced CS
Fallback to
CDMA2000 1xRTT
Cell Selection and
T_RESEL_SF_0DO T_RESEL_SF_0DO
Re-selection
T25(0.25), T25~0,
CS Fallback to
T_RESEL_SF_0DO T_RESEL_SF_0DO
CDMA2000 1xRTT
T5(0.5), T5~1,
Broadcast of Enumeration Type None
T_RESEL_SF_0DO T_RESEL_SF_0DO
system information
T75(0.75), T75~2,
Enhanced CS
T_RESEL_SF_1DO T_RESEL_SF_1DO
Fallback to
T0(1.0) T0~3
CDMA2000 1xRTT

Cell Selection and

T_RESEL_SF_0DO T_RESEL_SF_0DO
Re-selection
T25(0.25), T25~0,
CS Fallback to
T_RESEL_SF_0DO T_RESEL_SF_0DO
CDMA2000 1xRTT
T5(0.5), T5~1,
Broadcast of Enumeration Type None
T_RESEL_SF_0DO T_RESEL_SF_0DO
system information
T75(0.75), T75~2,
Enhanced CS
T_RESEL_SF_1DO T_RESEL_SF_1DO
Fallback to
T0(1.0) T0~3
CDMA2000 1xRTT

NOT_CFG(Not
CS Fallback to NOT_CFG~0,
Enumeration Type configure), None
CDMA2000 1xRTT CFG~1
CFG(Configure)
 BOOLEAN_FALSE( BOOLEAN_FALSE
CS Fallback to False), ~0,
Enumeration Type None
CDMA2000 1xRTT BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

None Interval Type 0~255 N/A None

Cell Selection and

Re-selection
Interval Type 0~7 N/A s
Broadcast of
system information
Cell Selection and
NOT_CFG(Not
Re-selection NOT_CFG~0,
Enumeration Type configure), None
Broadcast of CFG~1
CFG(Configure)
system information

T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0,
Cell Selection and T_RESEL_SF_0DO T_RESEL_SF_0DO
Re-selection T5(0.5), T5~1,
Enumeration Type None
Broadcast of T_RESEL_SF_0DO T_RESEL_SF_0DO
system information T75(0.75), T75~2,
T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3

T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0,
Cell Selection and T_RESEL_SF_0DO T_RESEL_SF_0DO
Re-selection T5(0.5), T5~1,
Enumeration Type None
Broadcast of T_RESEL_SF_0DO T_RESEL_SF_0DO
system information T75(0.75), T75~2,
T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3

None Interval Type 0~255 N/A None

Broadcast of
system information
Interval Type 0~7 N/A s
Cell Selection and
Re-selection

Cell Selection and

NOT_CFG(Not
Re-selection NOT_CFG~0,
Enumeration Type configure), None
Broadcast of CFG~1
CFG(Configure)
system information

T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0,
Cell Selection and T_RESEL_SF_0DO T_RESEL_SF_0DO
Re-selection T5(0.5), T5~1,
Enumeration Type None
Broadcast of T_RESEL_SF_0DO T_RESEL_SF_0DO
system information T75(0.75), T75~2,
T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3
 T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0,
Cell Selection and T_RESEL_SF_0DO T_RESEL_SF_0DO
Re-selection T5(0.5), T5~1,
Enumeration Type None
Broadcast of T_RESEL_SF_0DO T_RESEL_SF_0DO
system information T75(0.75), T75~2,
T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3

None Interval Type 0~255 N/A None

Cell Selection and

Re-selection
Interval Type -70~-22 N/A 2dBm
Broadcast of
system information
Cell Selection and
Re-selection
Interval Type 0~8 N/A 2dB
Broadcast of
system information

Broadcast of
system information
Interval Type -34~-3 N/A dB
Cell Selection and
Re-selection

Broadcast of
NOT_CFG(Not
system information NOT_CFG~0,
Enumeration Type configure), None
Cell Selection and CFG~1
CFG(Configure)
Re-selection
Broadcast of
system information
Interval Type 1~8 N/A dB
Cell Selection and
Re-selection

None Interval Type 0~255 N/A None

BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64
Broadcast of RF32~2, RF64~3,
Enumeration Type radio frames), None
system information RF128~4,
RF128(128 radio
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64
Broadcast of RF32~2, RF64~3,
Enumeration Type radio frames), None
system information RF128~4,
RF128(128 radio
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64
Broadcast of RF32~2, RF64~3,
Enumeration Type radio frames), None
system information RF128~4,
RF128(128 radio
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)
 RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64
Broadcast of RF32~2, RF64~3,
Enumeration Type radio frames), None
system information RF128~4,
RF128(128 radio
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64
Broadcast of RF32~2, RF64~3,
Enumeration Type radio frames), None
system information RF128~4,
RF128(128 radio
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64
Broadcast of RF32~2, RF64~3,
Enumeration Type radio frames), None
system information RF128~4,
RF128(128 radio
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)
 RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64
Broadcast of RF32~2, RF64~3,
Enumeration Type radio frames), None
system information RF128~4,
RF128(128 radio
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
Earthquake and RF32(32 radio
RF8~0, RF16~1,
Tsunami Warning frames), RF64(64
RF32~2, RF64~3,
System (ETWS) Enumeration Type radio frames), None
RF128~4,
Broadcast of RF128(128 radio
RF256~5, RF512~6
system information frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
Earthquake and RF32(32 radio
RF8~0, RF16~1,
Tsunami Warning frames), RF64(64
RF32~2, RF64~3,
System (ETWS) Enumeration Type radio frames), None
RF128~4,
Broadcast of RF128(128 radio
RF256~5, RF512~6
system information frames), RF256(256
radio frames),
RF512(512 radio
frames)
Earthquake and
Tsunami Warning Interval Type 1~300 N/A s
System (ETWS)

Earthquake and
MERGE~0,
Tsunami Warning Enumeration Type MERGE, DISCARD None
DISCARD~1
System (ETWS)
Earthquake and
MERGE~0,
Tsunami Warning Enumeration Type MERGE, DISCARD None
DISCARD~1
System (ETWS)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
CMAS Support frames), RF64(64
RF32~2, RF64~3,
Broadcast of Enumeration Type radio frames), None
RF128~4,
system information RF128(128 radio
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)
Broadcast of
Interval Type 27~1000 N/A None
system information

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
3GPP R8 RF8~0, RF16~1,
frames), RF64(64
Specifications RF32~2, RF64~3,
Enumeration Type radio frames), None
Broadcast of RF128~4,
RF128(128 radio
system information RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
eMBMS Service
radio frames),
Continuity
RF32(32 radio
Broadcast of RF8~0, RF16~1,
frames), RF64(64
system information RF32~2, RF64~3,
Enumeration Type radio frames), None
eMBMS Phase 1 RF128~4,
RF128(128 radio
based on RF256~5, RF512~6
frames), RF256(256
Centralized MCE
radio frames),
Architecture
RF512(512 radio
frames)
 RF8(8 radio
frames), RF16(16
eMBMS Service
radio frames),
Continuity
RF32(32 radio
Broadcast of RF8~0, RF16~1,
frames), RF64(64
system information RF32~2, RF64~3,
Enumeration Type radio frames), None
eMBMS Phase 1 RF128~4,
RF128(128 radio
based on RF256~5, RF512~6
frames), RF256(256
Centralized MCE
radio frames),
Architecture
RF512(512 radio
frames)

Broadcast of
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
system information
Broadcast of
Interval Type 0,40~100 N/A None
system information

None Interval Type 0~255 N/A None

 AL0(0), AL04(0.4),
Uplink Power AL05(0.5), AL0~0, AL04~1,
Control AL06(0.6), AL05~2, AL06~3,
Enumeration Type None
Broadcast of AL07(0.7), AL07~4, AL08~5,
system information AL08(0.8), AL09~6, AL1~7
AL09(0.9), AL1(1)

Uplink Power
Control
Interval Type -127~-96 N/A dBm
Broadcast of
system information
Uplink Power
Control
Interval Type -126~24 N/A dBm
Broadcast of
system information

Uplink Power
DELTAF_2(-2dB), DELTAF_2~0,
Control
Enumeration Type DELTAF0(0dB), DELTAF0~1, dB
Broadcast of
DELTAF2(2dB) DELTAF2~2
system information

Uplink Power
DELTAF1(1dB), DELTAF1~0,
Control
Enumeration Type DELTAF3(3dB), DELTAF3~1, dB
Broadcast of
DELTAF5(5dB) DELTAF5~2
system information
Uplink Power DELTAF_2(-2dB), DELTAF_2~0,
Control DELTAF0(0dB), DELTAF0~1,
Enumeration Type dB
Broadcast of DELTAF1(1dB), DELTAF1~2,
system information DELTAF2(2dB) DELTAF2~3

Uplink Power
DELTAF_2(-2dB), DELTAF_2~0,
Control
Enumeration Type DELTAF0(0dB), DELTAF0~1, dB
Broadcast of
DELTAF2(2dB) DELTAF2~2
system information

Uplink Power
DELTAF_2(-2dB), DELTAF_2~0,
Control
Enumeration Type DELTAF0(0dB), DELTAF0~1, dB
Broadcast of
DELTAF2(2dB) DELTAF2~2
system information
Uplink Power
Control
Interval Type -1~6 N/A 2dB
Broadcast of
system information

DELTAMsg2_NEG6
(-6dB),
DELTAMsg2_NEG4
DELTAMsg2_NEG6
(-4dB),
~0,
DELTAMsg2_NEG2
DELTAMsg2_NEG4
(-2dB),
~1,
DELTAMsg2_0(0dB
DELTAMsg2_NEG2
Uplink Power ),
Enumeration Type ~2, dB
Control DELTAMsg2_2(2dB
DELTAMsg2_0~3,
),
DELTAMsg2_2~4,
DELTAMsg2_4(4dB
DELTAMsg2_4~5,
),
DELTAMsg2_6~6,
DELTAMsg2_6(6dB
DELTAMsg2_8~7
),
DELTAMsg2_8(8dB
)

None Interval Type 0~255 N/A None

None Interval Type 0~65535 N/A None

arameter0_bit10), ~6,
RsvdSwPara0_bit1 RsvdSwPara0_bit8
1(ReservedSwitchP ~7,
arameter0_bit11), RsvdSwPara0_bit9
RsvdSwPara0_bit1 ~8,
2(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit12), 0~9,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
3(ReservedSwitchP 1~10,
arameter0_bit13), RsvdSwPara0_bit1
RsvdSwPara0_bit1 2~11,
4(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit14), 3~12,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
5(ReservedSwitchP 4~13,
arameter0_bit15), RsvdSwPara0_bit1
RsvdSwPara0_bit1 5~14,
6(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit16), 6~15,
None Bit Field Type None
RsvdSwPara0_bit1 RsvdSwPara0_bit1
7(ReservedSwitchP 7~16,
arameter0_bit17), RsvdSwPara0_bit1
RsvdSwPara0_bit1 8~17,
8(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit18), 9~18,
RsvdSwPara0_bit1 RsvdSwPara0_bit2
9(ReservedSwitchP 0~19,
arameter0_bit19), RsvdSwPara0_bit2
RsvdSwPara0_bit2 1~20,
0(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit20), 2~21,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
1(ReservedSwitchP 3~22,
arameter0_bit21), RsvdSwPara0_bit2
RsvdSwPara0_bit2 4~23,
2(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit22), 5~24,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
 arameter1_bit10), ~6,
RsvdSwPara1_bit1 RsvdSwPara1_bit8
1(ReservedSwitchP ~7,
arameter1_bit11), RsvdSwPara1_bit9
RsvdSwPara1_bit1 ~8,
2(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit12), 0~9,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
3(ReservedSwitchP 1~10,
arameter1_bit13), RsvdSwPara1_bit1
RsvdSwPara1_bit1 2~11,
4(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit14), 3~12,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
5(ReservedSwitchP 4~13,
arameter1_bit15), RsvdSwPara1_bit1
RsvdSwPara1_bit1 5~14,
6(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit16), 6~15,
None Bit Field Type None
RsvdSwPara1_bit1 RsvdSwPara1_bit1
7(ReservedSwitchP 7~16,
arameter1_bit17), RsvdSwPara1_bit1
RsvdSwPara1_bit1 8~17,
8(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit18), 9~18,
RsvdSwPara1_bit1 RsvdSwPara1_bit2
9(ReservedSwitchP 0~19,
arameter1_bit19), RsvdSwPara1_bit2
RsvdSwPara1_bit2 1~20,
0(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit20), 2~21,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
1(ReservedSwitchP 3~22,
arameter1_bit21), RsvdSwPara1_bit2
RsvdSwPara1_bit2 4~23,
2(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit22), 5~24,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
 arameter2_bit10), ~6,
RsvdSwPara2_bit1 RsvdSwPara2_bit8
1(ReservedSwitchP ~7,
arameter2_bit11), RsvdSwPara2_bit9
RsvdSwPara2_bit1 ~8,
2(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit12), 0~9,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
3(ReservedSwitchP 1~10,
arameter2_bit13), RsvdSwPara2_bit1
RsvdSwPara2_bit1 2~11,
4(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit14), 3~12,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
5(ReservedSwitchP 4~13,
arameter2_bit15), RsvdSwPara2_bit1
RsvdSwPara2_bit1 5~14,
6(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit16), 6~15,
None Bit Field Type None
RsvdSwPara2_bit1 RsvdSwPara2_bit1
7(ReservedSwitchP 7~16,
arameter2_bit17), RsvdSwPara2_bit1
RsvdSwPara2_bit1 8~17,
8(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit18), 9~18,
RsvdSwPara2_bit1 RsvdSwPara2_bit2
9(ReservedSwitchP 0~19,
arameter2_bit19), RsvdSwPara2_bit2
RsvdSwPara2_bit2 1~20,
0(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit20), 2~21,
RsvdSwPara2_bit2 RsvdSwPara2_bit2
1(ReservedSwitchP 3~22,
arameter2_bit21), RsvdSwPara2_bit2
RsvdSwPara2_bit2 4~23,
2(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit22), 5~24,
RsvdSwPara2_bit2 RsvdSwPara2_bit2

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~23 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~65535 N/A None

None Interval Type -600~500,32767 N/A 0.1dBm

None Interval Type 0~23,255 N/A None

None Interval Type 0~62 N/A None

None Interval Type 60~254 N/A None

None Interval Type 0~8 N/A None

None Interval Type 0~2147483647 N/A 0.1dBm

None Interval Type 0~8 N/A None

None Interval Type 0~60 N/A 0.1dB
 NO_COMPRESSIO
N(No
NO_COMPRESSIO
Compression),
N~0,
CPRI NORMAL_COMPR
NORMAL_COMPR
Compression / ESSION(Normal
Enumeration Type ESSION~1, None
Enhanced CPRI Compression),
ENHANCED_COM
Compression ENHANCED_COM
PRESSION~2,
PRESSION(Enhanc
NULL~255
ed Compression),
NULL(Invalid)

None Interval Type 0~1048575 N/A None

AUTO_MODE_CF
AUTO_MODE_CF
G(AUTO_MOD),
G~0,
None Enumeration Type MANUAL_MODE_ None
MANUAL_MODE_
CFG(MANUAL_MO
CFG~1
DE)
None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~35 N/A None

SectorEqmRefType[
None 0~16 N/A None
]

None Interval Type 0~65535 N/A None

None Interval Type 0~23,255 N/A None
None Interval Type -600~500,32767 N/A 0.1dBm
 NO_COMPRESSIO
N(No
NO_COMPRESSIO
Compression),
N~0,
CPRI NORMAL_COMPR
NORMAL_COMPR
Compression / ESSION(Normal
Enumeration Type ESSION~1, None
Enhanced CPRI Compression),
ENHANCED_COM
Compression ENHANCED_COM
PRESSION~2,
PRESSION(Enhanc
NULL~255
ed Compression),
NULL(Invalid)

AUTO_MODE_CF
AUTO_MODE_CF
G(AUTO_MOD),
G~0,
None Enumeration Type MANUAL_MODE_ None
MANUAL_MODE_
CFG(MANUAL_MO
CFG~1
DE)

None Interval Type 0~255 N/A None

None Interval Type 0~1048575 N/A None

None Interval Type 0~62 N/A None

None Interval Type 4~5,60~254 N/A None

None Interval Type 0~8 N/A None

None Interval Type 0~7 N/A None

None Interval Type 0~4294967295 N/A None

DATA_LINK_AVAIL
ABLE(Data Link DATA_LINK_AVAIL
Available), ABLE~0,
None Enumeration Type None
DATA_LINK_UNAV DATA_LINK_UNAV
AILABLE(Data Link AILABLE~1
Unavailable)

None Interval Type 0~254 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A microsecond

None Interval Type 0~4294967295 N/A None

None Interval Type 0~7 N/A None

None Interval Type 0~1 N/A None

None Interval Type 0~7 N/A None

BIDIRECTIONAL(Bi
directional), BIDIRECTIONAL~0
FORWARD_DIREC ,
TION(Forward_Dire FORWARD_DIREC
None Enumeration Type None
ction), TION~1,
BACKWARD_DIRE BACKWARD_DIRE
CTION(Backward_ CTION~2
Direction)

None Interval Type 0~255 N/A None

 SF500(500
subframes),
SF750(750
subframes),
SF500~0,
SF1280(1280
SF750~1,
subframes),
SF1280~2,
SF1920(1920
SF1920~3,
None Enumeration Type subframes), None
SF2560~4,
SF2560(2560
SF5120~5,
subframes),
SF10240~6,
SF5120(5120
INFINITY~7
subframes),
SF10240(10240
subframes),
INFINITY(Infinity)
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
 INVALID(Invalid
Timing
Measurement
Uplink Timing Mode), INVALID~0,
Enumeration Type None
Based on PUCCH ALLMEASMODE(Al ALLMEASMODE~1
l Timing
Measurement
Mode)
 INVALID(NULL),
SF218(218
subframes),
SF343(343
INVALID~0,
subframes),
SF218~218,
SF608(608
SF343~343,
subframes),
SF608~608,
None Enumeration Type SF928(928 None
SF928~928,
subframes),
SF1248~1248,
SF1248(1248
SF2528~2528,
subframes),
SF5088~5088
SF2528(2528
subframes),
SF5088(5088
subframes)
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

None Interval Type 0~15 N/A Ts

 TaEnhancePuschD
TaEnhancePuschD
None Bit Field Type mrs(TaEnhancePus None
mrs~0
chDmrs)

None Interval Type 0~255 N/A None

 MS100_T300(100m
s),
MS200_T300(200m
s),
MS300_T300(300m MS100_T300~0,
s), MS200_T300~1,
MS400_T300(400m MS300_T300~2,
Broadcast of s), MS400_T300~3,
Enumeration Type ms
system information MS600_T300(600m MS600_T300~4,
s), MS1000_T300~5,
MS1000_T300(100 MS1500_T300~6,
0ms), MS2000_T300~7
MS1500_T300(150
0ms),
MS2000_T300(200
0ms)

MS100_T301(100m
s),
MS200_T301(200m
s),
MS300_T301(300m MS100_T301~0,
s), MS200_T301~1,
MS400_T301(400m MS300_T301~2,
Broadcast of s), MS400_T301~3,
Enumeration Type ms
system information MS600_T301(600m MS600_T301~4,
s), MS1000_T301~5,
MS1000_T301(100 MS1500_T301~6,
0ms), MS2000_T301~7
MS1500_T301(150
0ms),
MS2000_T301(200
0ms)
 MS0_T310(0ms),
MS50_T310(50ms),
MS100_T310(100m
MS0_T310~0,
s),
MS50_T310~1,
MS200_T310(200m
MS100_T310~2,
Broadcast of s),
Enumeration Type MS200_T310~3, ms
system information MS500_T310(500m
MS500_T310~4,
s),
MS1000_T310~5,
MS1000_T310(100
MS2000_T310~6
0ms),
MS2000_T310(200
0ms)

MS1000_T311(100
0ms),
MS3000_T311(300
0ms),
MS1000_T311~0,
MS5000_T311(500
MS3000_T311~1,
0ms),
MS5000_T311~2,
Broadcast of MS10000_T311(10
Enumeration Type MS10000_T311~3, ms
system information 000ms),
MS15000_T311~4,
MS15000_T311(15
MS20000_T311~5,
000ms),
MS30000_T311~6
MS20000_T311(20
000ms),
MS30000_T311(30
000ms)
 n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,
Broadcast of
Enumeration Type n4(4), n5(5), n6(6), n4~3, n5~4, n6~5, None
system information
n8(8), n10(10) n8~6, n10~7

n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,

Broadcast of
Enumeration Type n4(4), n6(6), n8(8), n4~3, n6~4, n8~5, None
system information
n10(10), n20(20) n10~6, n20~7

MIN5_T325(MIN5_
T325),
MIN10_T325(MIN1 MIN5_T325~0,
RRC Connection 0_T325), MIN10_T325~1,
Enumeration Type min
Management MIN15_T325(MIN1 MIN15_T325~2,
5_T325), MIN30_T325~3
MIN30_T325(MIN3
0_T325)
None Interval Type 0~255 N/A None

None String Type 1~99 characters N/A None

Broadcast of BOOLEAN_FALSE( BOOLEAN_FALSE
system information False), ~0,
Enumeration Type None
Cell Selection and BOOLEAN_TRUE( BOOLEAN_TRUE~
Re-selection True) 1

Normal CP NORMAL_CP(Nor
Extended CP mal), NORMAL_CP~0,
Enumeration Type None
Broadcast of EXTENDED_CP(Ex EXTENDED_CP~1
system information tended)
 NORMAL_CP(Nor
Normal CP mal), NORMAL_CP~0,
Enumeration Type None
Extended CP EXTENDED_CP(Ex EXTENDED_CP~1
tended)
Cell Selection and
Re-selection
Broadcast of
system information Interval Type 1~64 N/A None
Multi-Band
Compatibility
Enhancement

Cell Selection and

NOT_CFG(Not
Re-selection NOT_CFG~0,
Enumeration Type configure), None
Broadcast of CFG~1
CFG(Configure)
system information
Coverage Based
Intra-frequency
Handover
18000~46589,5443
Cell Selection and Interval Type N/A None
6~65535
Re-selection
Broadcast of
system information

Broadcast of
system information
Coverage Based
0~46589,54436~65
Intra-frequency Interval Type N/A None
535
Handover
Cell Selection and
Re-selection
 CELL_BW_N6(1.4
M),
CELL_BW_N15(3M
), CELL_BW_N6~0,
Compact
CELL_BW_N25(5M CELL_BW_N15~1,
Bandwidth
), CELL_BW_N25~2,
Broadcast of Enumeration Type None
CELL_BW_N50(10 CELL_BW_N50~3,
system information
M), CELL_BW_N75~4,
Scalable Bandwidth
CELL_BW_N75(15 CELL_BW_N100~5
M),
CELL_BW_N100(2
0M)
 CELL_BW_N6(1.4
M),
CELL_BW_N15(3M
), CELL_BW_N6~0,
Compact
CELL_BW_N25(5M CELL_BW_N15~1,
Bandwidth
), CELL_BW_N25~2,
Broadcast of Enumeration Type None
CELL_BW_N50(10 CELL_BW_N50~3,
system information
M), CELL_BW_N75~4,
Scalable Bandwidth
CELL_BW_N75(15 CELL_BW_N100~5
M),
CELL_BW_N100(2
0M)

Broadcast of
Interval Type 0~255 N/A None
system information
Compact
Bandwidth
Interval Type 0~503 N/A None
Broadcast of
system information

Broadcast of
Interval Type 1~32 N/A None
system information
 CELL_DEACTIVE(
Deactivated), CELL_DEACTIVE~
None Enumeration Type None
CELL_ACTIVE(Acti 0, CELL_ACTIVE~1
ve)
 CELL_UNBLOCK(U CELL_UNBLOCK~
nblock), 0,
CELL_HIGH_BLOC CELL_HIGH_BLOC
K(High block), K~1,
None Enumeration Type None
CELL_MIDDLE_BL CELL_MIDDLE_BL
OCK(Middle block), OCK~2,
CELL_LOW_BLOC CELL_LOW_BLOC
K(Low block) K~3

None Interval Type 1~1440 N/A min

Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
configuration type 7 CELL_FDD(FDD), CELL_FDD~0,
Enumeration Type None
Optional uplink- CELL_TDD(TDD) CELL_TDD~1
downlink subframe
configuration
uplink-downlink
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5
Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
SA0(SA0),
uplink-downlink
SA1(SA1),
special subframe SA0~0, SA1~1,
SA2(SA2),
configuration type 7 SA2~2, SA3~3,
Enumeration Type SA3(SA3), None
Optional uplink- SA4~4, SA5~5,
SA4(SA4),
downlink subframe SA6~6
SA5(SA5),
configuration
SA6(SA6)
uplink-downlink
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5
Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration SSP0(SSP0),
type1&2 SSP1(SSP1),
uplink-downlink SSP2(SSP2),
SSP0~0, SSP1~1,
special subframe SSP3(SSP3),
SSP2~2, SSP3~3,
configuration type 7 SSP4(SSP4),
Enumeration Type SSP4~4, SSP5~5, None
Optional uplink- SSP5(SSP5),
SSP6~6, SSP7~7,
downlink subframe SSP6(SSP6),
SSP8~8, SSP9~9
configuration SSP7(SSP7),
uplink-downlink SSP8(SSP8),
subframe SSP9(SSP9)
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5
Coverage Based
Intra-frequency
Handover
Mobility dB-24(-24dB), dB-
Management 22(-22dB), dB-20(-
Coverage Based 20dB), dB-18(-
Inter-frequency 18dB), dB-16(-
Handover 16dB), dB-14(-
Distance Based 14dB), dB-12(-
Inter-frequency 12dB), dB-10(- dB-24~0, dB-22~1,
Handover 10dB), dB-8(-8dB), dB-20~2, dB-18~3,
Service Based dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
Inter-frequency 5dB), dB-4(-4dB), dB-12~6, dB-10~7,
Handover dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
PS Inter-RAT 2dB), dB-1(-1dB), dB-5~10, dB-4~11,
Mobility between E- dB0(0dB), dB-3~12, dB-2~13,
UTRAN and dB1(1dB), dB-1~14, dB0~15,
Enumeration Type dB
UTRAN dB2(2dB), dB1~16, dB2~17,
Service based dB3(3dB), dB3~18, dB4~19,
Inter-RAT handover dB4(4dB), dB5~20, dB6~21,
to UTRAN dB5(5dB), dB8~22, dB10~23,
Distance based dB6(6dB), dB12~24, dB14~25,
Inter-RAT handover dB8(8dB), dB16~26, dB18~27,
to UTRAN dB10(10dB), dB20~28, dB22~29,
PS Inter-RAT dB12(12dB), dB24~30
Mobility between E- dB14(14dB),
UTRAN and dB16(16dB),
GERAN dB18(18dB),
Service based dB20(20dB),
Inter-RAT handover dB22(22dB),
to GERAN dB24(24dB)
Distance based
Inter-RAT handover
to GERAN
Coverage Based
Intra-frequency
Handover
Cell Selection and
Re-selection dB-24(-24dB), dB-
Mobility 22(-22dB), dB-20(-
Management 20dB), dB-18(-
Coverage Based 18dB), dB-16(-
Inter-frequency 16dB), dB-14(-
Handover 14dB), dB-12(-
Distance Based 12dB), dB-10(- dB-24~0, dB-22~1,
Inter-frequency 10dB), dB-8(-8dB), dB-20~2, dB-18~3,
Handover dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
Service Based 5dB), dB-4(-4dB), dB-12~6, dB-10~7,
Inter-frequency dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
Handover 2dB), dB-1(-1dB), dB-5~10, dB-4~11,
PS Inter-RAT dB0(0dB), dB-3~12, dB-2~13,
Mobility between E- dB1(1dB), dB-1~14, dB0~15,
Enumeration Type dB
UTRAN and dB2(2dB), dB1~16, dB2~17,
UTRAN dB3(3dB), dB3~18, dB4~19,
Service based dB4(4dB), dB5~20, dB6~21,
Inter-RAT handover dB5(5dB), dB8~22, dB10~23,
to UTRAN dB6(6dB), dB12~24, dB14~25,
Distance based dB8(8dB), dB16~26, dB18~27,
Inter-RAT handover dB10(10dB), dB20~28, dB22~29,
to UTRAN dB12(12dB), dB24~30
PS Inter-RAT dB14(14dB),
Mobility between E- dB16(16dB),
UTRAN and dB18(18dB),
GERAN dB20(20dB),
Service based dB22(22dB),
Inter-RAT handover dB24(24dB)
to GERAN
Distance based
Inter-RAT handover
to GERAN
Random Access
Interval Type 0~837 N/A None
Procedure
 LOW_SPEED(Low
speed cell flag),
HIGH_SPEED(High LOW_SPEED~0,
speed cell flag), HIGH_SPEED~1,
High Speed Mobility
ULTRA_HIGH_SPE ULTRA_HIGH_SPE
Ultra High Speed Enumeration Type None
ED(Ultra high ED~2,
Mobility
speed cell flag), EXTRA_HIGH_SPE
EXTRA_HIGH_SPE ED~3
ED(Extra high
speed cell flag)
Random Access
Interval Type 0~4 N/A None
Procedure
Random Access
Procedure
Random Access
Procedure / Interval Type 1~160000 N/A m
Extended Cell
Access Radius
beyond 100km
 NOT_CFG(Not
Compact NOT_CFG~0,
Enumeration Type configure), None
Bandwidth CFG~1
CFG(Configure)
 12~14,44~50,89~1
Compact
Interval Type 00,139~150,183~2 N/A 0.1MHz
Bandwidth
00
 12~14,44~50,89~1
Compact
Interval Type 00,139~150,183~2 N/A 0.1MHz
Bandwidth
00

Earthquake and
Tsunami Warning
NOT_CFG(Not
System (ETWS) NOT_CFG~0,
Enumeration Type configure), None
CMAS Support CFG~1
CFG(Configure)
Broadcast of
system information
Earthquake and
Tsunami Warning
System (ETWS)
Interval Type 0~16777215 N/A None
CMAS Support
Broadcast of
system information

Uplink Power
NOT_CFG(Not
Control NOT_CFG~0,
Enumeration Type configure), None
Broadcast of CFG~1
CFG(Configure)
system information

Uplink Power
Control
Interval Type -30~36 N/A dBm
Broadcast of
system information
SFN
Adaptive
SFN/SDMA
BOOLEAN_FALSE( BOOLEAN_FALSE
Inter-BBP SFN
False), ~0,
Inter-BBU SFN Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
Inter-BBP Adaptive
True) 1
SFN/SDMA
Inter-BBU Adaptive
SFN/SDMA
 SFN(SFN),
CELL_COMBINATI
SFN ON(Cell SFN~0,
Adaptive Combination), CELL_COMBINATI
SFN/SDMA TWO_RRU_COMBI ON~1,
Inter-BBP SFN NATION(TWO RRU TWO_RRU_COMBI
Inter-BBU SFN Enumeration Type Combination), NATION~2, None
Inter-BBP Adaptive DIGITAL_COMBINA DIGITAL_COMBINA
SFN/SDMA TION(Cell Digital TION~3,
Inter-BBU Adaptive Combination), MPRU_AGGREGA
SFN/SDMA MPRU_AGGREGA TION~5
TION(MPRU_AGG
REGATION)
 NO_COMPRESSIO
N(No
NO_COMPRESSIO
Compression),
CPRI N~0,
NORMAL_COMPR
Compression / NORMAL_COMPR
Enumeration Type ESSION(Normal None
Enhanced CPRI ESSION~1,
Compression),
Compression ENHANCED_COM
ENHANCED_COM
PRESSION~2
PRESSION(Enhanc
ed Compression)
None Interval Type 2~7 N/A None
 BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
None Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 CRS_PORT_1(1
port),
DL 2x2 MIMO CRS_PORT_1~1,
CRS_PORT_2(2
DL 4x2 MIMO Enumeration Type CRS_PORT_2~2, None
ports),
DL 4x4 MIMO CRS_PORT_4~4
CRS_PORT_4(4
ports)
 1T1R~0, 1T2R~1,
1T1R, 1T2R, 2T2R,
2T2R~2, 2T4R~3,
None Enumeration Type 2T4R, 4T4R, 8T8R, None
4T4R~4, 8T8R~5,
2T8R, 4T8R
2T8R~6, 4T8R~7

None String Type 0~256 characters N/A None

Intra-Band Carrier
Aggregation for
Downlink 2CC
Inter-Band Carrier
Aggregation for
Downlink 2CC
Carrier Aggregation
UL_DL(Uplink and
for Downlink 2CC in
downlink), UL_DL~0,
40MHz Enumeration Type None
DL_ONLY(Downlink DL_ONLY~1
Support of UE
only)
Category 6
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz

ACTIVE(Active),
Broadcast of ACTIVE~0,
Enumeration Type STANDBY(Standby None
system information STANDBY~1
)
 NOT_CFG(Not
configure),
4T4P_0213(4T4P_
0213),
4T4P_0231(4T4P_
0231), NOT_CFG~0,
4T4P_0123(4T4P_ 4T4P_0213~1,
0123), 4T4P_0231~2,
4T4P_0132(4T4P_ 4T4P_0123~3,
0132), 4T4P_0132~4,
4T4P_0312(4T4P_ 4T4P_0312~5,
0312), 4T4P_0321~6,
4T4P_0321(4T4P_ 4T2P_0011~13,
0321), 4T2P_0101~14,
DL 2x2 MIMO
4T2P_0011(4T2P_0 4T2P_0110~15,
DL 4x2 MIMO Enumeration Type None
011), 8T2P_00001111~16
DL 4x4 MIMO
4T2P_0101(4T2P_ ,
0101), 8T2P_00110011~1
4T2P_0110(4T2P_0 7,
110), 8T2P_01010101~1
8T2P_00001111(8T 8,
2P_00001111), 8T4P_00112233~1
8T2P_00110011(8T 9,
2P_00110011), 8T4P_01230123~2
8T2P_01010101(8T 0
2P_01010101),
8T4P_00112233(8T
4P_00112233),
8T4P_01230123(8T
4P_01230123)
 2_TO_1(2:1
Compression),
2_TO_1~0,
3_TO_1(3:1
None Enumeration Type 3_TO_1~1, None
Compression),
4_TO_1~2
4_TO_1(4:1
Compression)
 CELL_INST_UNIN
STALL(Uninstall),
CELL_INST_UEM_
CFGING(Inner
CELL_INST_UNIN
software module
STALL~0,
configuring),
CELL_INST_UEM_
CELL_INST_RRU_
CFGING~1,
CFGING(RRU
CELL_INST_RRU_
configuring),
CFGING~2,
CELL_INST_BBI_C
CELL_INST_BBI_C
FGING(BBI
FGING~3,
configuring),
CELL_INST_RECF
CELL_INST_RECF
GING~4,
GING(Recfging),
CELL_INST_DELE
CELL_INST_DELE
TING~5,
TING(Deleting),
None Enumeration Type CELL_INST_NORM None
CELL_INST_NORM
AL~6,
AL(Normal),
CELL_INST_BARR
CELL_INST_BARR
ED~7,
ED(Barred),
CELL_INST_ALLO
CELL_INST_ALLO
CATING_RES~8,
CATING_RES(Alloc
CELL_INST_CRM_
ating resource),
CFGING~9,
CELL_INST_CRM_
CELL_INST_SFN_
CFGING(RRU
RECFGING~10,
configuring),
CELL_INST_RRU_
CELL_INST_SFN_
DPD_TRAINING~1
RECFGING(Recfgi
1
ng),
CELL_INST_RRU_
DPD_TRAINING(R
RU DPD Training)

None Interval Type 0~4294967295 N/A None

None String Type 0~32 characters N/A None

 (UnBlock Cell),
CELL_NO_OP~0,
CELL_SETUP_HE
CELL_SETUP_ACT
ALCHK(Cell
~1,
Healthy Check),
CELL_SETUP_UBL
CELL_SETUP_141
~2,
(141 Cell Setup),
CELL_SETUP_HE
CELL_SETUP_UL
ALCHK~3,
WIDESCAN(UL
CELL_SETUP_141
Wide Freq Scan
~4,
Cell Setup),
CELL_SETUP_UL
CELL_DEL_BLK_L
WIDESCAN~5,
OW(Block Cell
CELL_DEL_BLK_L
Low),
OW~26,
CELL_DEL_BLK_M
CELL_DEL_BLK_M
ID(Block Cell Mid),
ID~27,
CELL_DEL_BLK_H
CELL_DEL_BLK_H
IGH(Block Cell
IGH~28,
High),
CELL_DEL_NOUS
None Enumeration Type CELL_DEL_NOUS None
ER~29,
ER(Block Cell No
CELL_DEL_DEA~3
User),
0,
CELL_DEL_DEA(D
CELL_DEL_RMV~3
ea Cell),
1,
CELL_DEL_RMV(D
CELl_DEL_HEALC
elete Cell),
HK~32,
CELl_DEL_HEALC
CELL_DEL_UNHE
HK(Cell Healthy
AL~33,
Chk),
CELL_DEL_SETUP
CELL_DEL_UNHE
_FAIL~34,
AL(Cell Unhealthy),
CELL_DEL_141_D
CELL_DEL_SETUP
EL~35,
_FAIL(Cell Setup
CELL_DEL_ULWID
Fail),
ESCAN~36,
CELL_DEL_141_D
CELL_DEL_CELLN
EL(141 Cell Del),
OACCESSALM~11
CELL_DEL_ULWID
2
ESCAN(UL Wide

None String Type 0~32 characters N/A None

 (UnBlock Cell),
CELL_NO_OP~0,
CELL_SETUP_HE
CELL_SETUP_ACT
ALCHK(Cell
~1,
Healthy Check),
CELL_SETUP_UBL
CELL_SETUP_141
~2,
(141 Cell Setup),
CELL_SETUP_HE
CELL_SETUP_UL
ALCHK~3,
WIDESCAN(UL
CELL_SETUP_141
Wide Freq Scan
~4,
Cell Setup),
CELL_SETUP_UL
CELL_DEL_BLK_L
WIDESCAN~5,
OW(Block Cell
CELL_DEL_BLK_L
Low),
OW~26,
CELL_DEL_BLK_M
CELL_DEL_BLK_M
ID(Block Cell Mid),
ID~27,
CELL_DEL_BLK_H
CELL_DEL_BLK_H
IGH(Block Cell
IGH~28,
High),
CELL_DEL_NOUS
None Enumeration Type CELL_DEL_NOUS None
ER~29,
ER(Block Cell No
CELL_DEL_DEA~3
User),
0,
CELL_DEL_DEA(D
CELL_DEL_RMV~3
ea Cell),
1,
CELL_DEL_RMV(D
CELl_DEL_HEALC
elete Cell),
HK~32,
CELl_DEL_HEALC
CELL_DEL_UNHE
HK(Cell Healthy
AL~33,
Chk),
CELL_DEL_SETUP
CELL_DEL_UNHE
_FAIL~34,
AL(Cell Unhealthy),
CELL_DEL_141_D
CELL_DEL_SETUP
EL~35,
_FAIL(Cell Setup
CELL_DEL_ULWID
Fail),
ESCAN~36,
CELL_DEL_141_D
CELL_DEL_CELLN
EL(141 Cell Del),
OACCESSALM~11
CELL_DEL_ULWID
2
ESCAN(UL Wide
 Shutdown Mode),
CELL_PWRSAVE_
CARRIERPWROFF
(Intelligent Power-
Off of Carriers
Mode),
CELL_PWRSAVE_ CELL_PWRSAVE_
LOWPWR_CELLU UNINSTALL~0,
SEDPWRRDU(Low CELL_PWRSAVE_
Power RFSHD~1,
Consumption CELL_PWRSAVE_
Mode-Cell Used CARRIERPWROFF
Power Reduced), ~2,
CELL_PWRSAVE_ CELL_PWRSAVE_
LOWPWR_RSPWR LOWPWR_CELLU
RDU(Low Power SEDPWRRDU~3,
Consumption CELL_PWRSAVE_
Mode-Reference LOWPWR_RSPWR
Signal Power RDU~4,
None Enumeration Type None
Reduced), CELL_PWRSAVE_
CELL_PWRSAVE_ LOWPWR_RFSHD
LOWPWR_RFSHD( ~5,
Low Power CELL_PWRSAVE_
Consumption LOWPWR_CELLS
Mode-RF HD~6,
Shutdown), AUTO_PWROFF_R
CELL_PWRSAVE_ FSLEEP~7,
LOWPWR_CELLS CELL_PWRSAVE_I
HD(Low Power NTERRAT_CELLS
Consumption HD~8,
Mode-Cell CELL_PWRSAVE_
Shutdown), DYNADJVOLT~9
AUTO_PWROFF_R
FSLEEP(RF
Module Regular
Time Sleep Mode),
CELL_PWRSAVE_I
NTERRAT_CELLS

None String Type 0~12 characters N/A None

 BASIC_TYPE(Basic
Type),
TWO_RRU_COMBI
NATION_TYPE(TW
O RRU
BASIC_TYPE~0,
Combination Type),
TWO_RRU_COMBI
SFN_TYPE(SFN
NATION_TYPE~2,
Type),
SFN_TYPE~3,
BF_TYPE(BF
BF_TYPE~4,
Type),
CELL_COMBINATI
CELL_COMBINATI
None Enumeration Type ON_TYPE~14, None
ON_TYPE(Cell
DIGITAL_COMBINA
Combination Type),
TION_TYPE~15,
DIGITAL_COMBINA
MPRU_AGGREGA
TION_TYPE(Cell
TION_TYPE~16,
Digital Combination
INVALID_TYPE~25
Type),
5
MPRU_AGGREGA
TION_TYPE(MPRU
Aggregation Type),
INVALID_TYPE(Inv
alid Type)

None Interval Type 0~62 N/A None

None Interval Type 4~254 N/A None

None Interval Type 0~8 N/A None

UNINSTALL(Uninst
all), UNINSTALL~0,
None Enumeration Type SYMBOL_SHUTDO SYMBOL_SHUTDO None
WN(Symbol WN~1
shutdown)
None Interval Type -200~65535 N/A 0.1dBm

None Interval Type 0~1048575 N/A None

None Interval Type 0~7 N/A None

None Interval Type 0~1 N/A None

None Interval Type 0~5 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~255 N/A None

Multi-Band
Compatibility MultiBand[] 0~2 N/A None
Enhancement

None Interval Type 1~64 N/A None

Hybrid RAN
Interval Type 0~5,255 N/A None
Sharing

None String Type 0~12 characters N/A None

None String Type 0~12 characters N/A None

None Interval Type 0~12 N/A None

None Interval Type 0~4 N/A None

None Interval Type 0~4 N/A None

None Interval Type 0~2 N/A None

None Interval Type 0~2 N/A None

None Interval Type 0~2 N/A None

None Interval Type 0~1 N/A None

None Interval Type 1~7 N/A None

None Interval Type 0~35 N/A None

None Interval Type 0~35 N/A None

ms5(ms5),
ms10(ms10), ms5~0, ms10~1,
None Enumeration Type ms20(ms20), ms20~2, ms40~3, None
ms40(ms40), ms80~4
ms80(ms80)
None String Type 0~16 characters N/A None

None String Type 0~32 characters N/A None

None String Type 0~32 characters N/A None

PRIMARY(PRIMAR
Y), PRIMARY~0,
None Enumeration Type SECONDARY(SEC SECONDARY~1, None
ONDARY), INVALIDVALUE~2
INVALIDVALUE(-)
 BOOLEAN_FALSE( BOOLEAN_FALSE
Automatic
False), ~0,
Neighbour Relation Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
(ANR)
True) 1

NOT_ALLOWED(N
Automatic
OT_ALLOWED), NOT_ALLOWED~0
Neighbour Relation Enumeration Type None
ALLOWED(ALLOW , ALLOWED~1
(ANR)
ED)
Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe TRUNCATION(TRU
TRUNCATION~0,
configuration type 7 NCATION),
Enumeration Type NO_TRUNCATION None
Optional uplink- NO_TRUNCATION(
~1
downlink subframe NO_TRUNCATION)
configuration
uplink-downlink
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5

Static TDM
eICIC/Static TDM MACRO(MACRO), MACRO~0,
Enumeration Type None
eICIC/Dynamic MICRO(MICRO) MICRO~1
TDM eICIC
Automatic
Neighbour Relation Interval Type 0~31 N/A None
(ANR)

RelaxedBH(Relaxe
dBH), RelaxedBH~0,
None Enumeration Type None
IdealBH(IdealBH), IdealBH~1, other~2
other(other)

None Interval Type 0~1048575 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~1048575 N/A None

Extended Cell
Access Radius Interval Type 0~60000 N/A m
beyond 100km

INTERFHIGHSPEE
INTERFHIGHSPEE
DSTATUS_NO_OP(
DSTATUS_NO_OP
Disable),
~0,
INTERFHIGHSPEE
INTERFHIGHSPEE
None Enumeration Type DSTATUS_ACT(Ru None
DSTATUS_ACT~1,
n),
INTERFHIGHSPEE
INTERFHIGHSPEE
DSTATUS_RENEW
DSTATUS_RENEW
~2
(Restore)

None Interval Type 0~65535 N/A None

None Interval Type 0~1048575 N/A None

EUCELLSECTORE
QM(Sector EUCELLSECTORE
equipment), QM~0,
None Enumeration Type None
EUCELLSECTORE EUCELLSECTORE
QMGROUP(Sector QMGROUP~1
equipment group)

EUCELLSECTORE
QM(Sector EUCELLSECTORE
equipment), QM~0,
None Enumeration Type None
EUCELLSECTORE EUCELLSECTORE
QMGROUP(Sector QMGROUP~1
equipment group)

SUCCESS(SUCCE
SS),
FAILURE(FAILURE
SUCCESS~0,
), NA(NA),
FAILURE~1, NA~2,
FAILURE_LOWSIN
FAILURE_LOWSIN
None Enumeration Type R(FAILURE_LOWS None
R~3,
INR),
FAILURE_BLOCKB
FAILURE_BLOCKB
YTOPTASK~4
YTOPTASK(FAILU
RE_BLOCKBYTOP
TASK)

None String Type 0~32 characters N/A None

INITIAL(INITIAL), INITIAL~0,
None Enumeration Type PERIODIC(PERIO PERIODIC~1, None
DIC), NA(NA) NA~2
 Latest(Latest),
SecondLatest(Seco
ndLatest),
ThirdLatest(ThirdLa
test),
Latest~0,
FourthLatest(Fourth
SecondLatest~1,
Latest),
ThirdLatest~2,
FifthLatest(FifthLate
FourthLatest~3,
st),
FifthLatest~4,
None Enumeration Type SixthLatest(SixthLat None
SixthLatest~5,
est),
SeventhLatest~6,
SeventhLatest(Sev
EighthLatest~7,
enthLatest),
NinthLatest~8,
EighthLatest(Eighth
TenthLatest~9
Latest),
NinthLatest(NinthLa
test),
TenthLatest(TenthL
atest)

NONE(Normal cell),
NONE~0,
None Enumeration Type SPECSERCELL(Sp None
SPECSERCELL~1
ecified service cell)
 NORMAL(NORMAL NORMAL~0,
None Enumeration Type None
), SPLIT(SPLIT) SPLIT~1

Inter-BBU SFN
Inter-BBU Adaptive Interval Type 0~65535 N/A None
SFN/SDMA

None Interval Type 0~1048575 N/A None

None Interval Type 0~255 N/A None

Inter-BBU SFN
Inter-BBU Adaptive Interval Type 0~23,255 N/A None
SFN/SDMA
Inter-BBU SFN
Inter-BBU Adaptive Interval Type -600~500,32767 N/A 0.1dBm
SFN/SDMA

None Interval Type 0~60 N/A 0.1dB

 NO_COMPRESSIO
N(No
NO_COMPRESSIO
Compression),
N~0,
CPRI NORMAL_COMPR
NORMAL_COMPR
Compression / ESSION(Normal
Enumeration Type ESSION~1, None
Enhanced CPRI Compression),
ENHANCED_COM
Compression ENHANCED_COM
PRESSION~2,
PRESSION(Enhanc
NULL~255
ed Compression),
NULL(Invalid)

AUTO_MODE_CF
CPRI AUTO_MODE_CF
G(AUTO_MOD),
Compression / G~0,
Enumeration Type MANUAL_MODE_ None
Enhanced CPRI MANUAL_MODE_
CFG(MANUAL_MO
Compression CFG~1
DE)
Inter-eNodeB SFN
based on
coordinated BBU
Inter-eNodeB
Interval Type 0~35 N/A None
adaptive
SFN/SDMA based
on coordinated
BBU

None Interval Type 0~1048575 N/A None

None Interval Type 0~255 N/A None

Inter-eNodeB SFN
based on
coordinated BBU
Inter-eNodeB
Interval Type 0~23,255 N/A None
adaptive
SFN/SDMA based
on coordinated
BBU
Inter-eNodeB SFN
based on
coordinated BBU
Inter-eNodeB
Interval Type -600~500,32767 N/A 0.1dBm
adaptive
SFN/SDMA based
on coordinated
BBU

SfnSectorEqmRefT
None 0~16 N/A None
ype[]

None Interval Type 0~65535 N/A None

 NO_COMPRESSIO
Inter-eNodeB SFN N(No
NO_COMPRESSIO
based on Compression),
N~0,
coordinated BBU NORMAL_COMPR
NORMAL_COMPR
Inter-eNodeB ESSION(Normal
Enumeration Type ESSION~1, None
adaptive Compression),
ENHANCED_COM
SFN/SDMA based ENHANCED_COM
PRESSION~2,
on coordinated PRESSION(Enhanc
NULL~255
BBU ed Compression),
NULL(Invalid)

Inter-eNodeB SFN
based on
AUTO_MODE_CF
coordinated BBU AUTO_MODE_CF
G(AUTO_MOD),
Inter-eNodeB G~0,
Enumeration Type MANUAL_MODE_ None
adaptive MANUAL_MODE_
CFG(MANUAL_MO
SFN/SDMA based CFG~1
DE)
on coordinated
BBU

None Interval Type 0~255 N/A None

None Interval Type 0~1048575 N/A None

None Interval Type 0~255 N/A None

Intra-LTE Backoff
Interval Type 1~100 N/A %
Load Balancing
Intra-LTE Backoff
Interval Type 1~10000 N/A None
Load Balancing
Intra-LTE Backoff
Interval Type 1~100 N/A %
Load Balancing
Intra-LTE Backoff
Interval Type 1~100 N/A %
Load Balancing
Intra-LTE Backoff
Interval Type 0~28 N/A None
Load Balancing

Intra-LTE Backoff
Interval Type 0~28 N/A None
Load Balancing
Intra-LTE Backoff
Interval Type 0~1000 N/A None
Load Balancing

Intra-LTE Backoff
Interval Type 0~100 N/A None
Load Balancing
Intra-LTE Backoff
Interval Type 0~28 N/A None
Load Balancing

Intra-LTE Backoff
Interval Type 0~28 N/A None
Load Balancing
Intra-LTE Backoff
Interval Type 0~1000 N/A None
Load Balancing

Intra-LTE Backoff
Interval Type 0~100 N/A None
Load Balancing
Uplink Traffic-based
Interval Type 1~100 N/A %
MLB to LTE FDD

Uplink Traffic-based
Interval Type 1~10000 N/A None
MLB to LTE FDD
Uplink Traffic-based
Interval Type 1~200 N/A 0.1s
MLB to LTE FDD

None Interval Type 0~255 N/A None

Single Streaming SINGLE_LAYER_B SINGLE_LAYER_B

Beamforming F(Single-Layer BF), F~0,
Enumeration Type None
Dual Streaming DUAL_LAYER_BF( DUAL_LAYER_BF~
Beamforming Dual-Layer BF) 1

None Interval Type 0~1048575 N/A None

None String Type 0~12 characters N/A None

None String Type 0~32 characters N/A None

None String Type 0~32 characters N/A None

None String Type 0~12 characters N/A dB

None String Type 0~12 characters N/A dB

AUTO_CONFIG(AU
TO_CONFIG),
CIRCULAR_ANTE
AUTO_CONFIG~0,
NNA_ARRAY_BFA
CIRCULAR_ANTE
LG(CIRCULAR_AN
Dual Streaming NNA_ARRAY_BFA
Enumeration Type TENNA_ARRAY_B None
Beamforming LG~1,
FALG),
LINEAR_ANTENNA
LINEAR_ANTENNA
_ARRAY_BFALG~2
_ARRAY_BFALG(LI
NEAR_ANTENNA_
ARRAY_BFALG)

TWO_LAYERS(TW
MU-Beamforming O_LAYERS), TWO_LAYERS~0,
Enumeration Type None
(DL 4-Layer) FOUR_LAYERS(F FOUR_LAYERS~1
OUR_LAYERS)
 PRE_MU_PRI_PAI
R_RULE(PRE_MU
_PRI_PAIR_RULE),
PRE_MU_PRI_PAI
POST_MU_PF_PRI
R_RULE~0,
_PAIR_RULE(POS
MU-Beamforming POST_MU_PF_PRI
Enumeration Type T_MU_PF_PRI_PAI None
(DL 4-Layer) _PAIR_RULE~1,
R_RULE),
POST_MU_EFF_P
POST_MU_EFF_P
RI_PAIR_RULE~2
RI_PAIR_RULE(PO
ST_MU_EFF_PRI_
PAIR_RULE)

None Interval Type 0~255 N/A None

CQI Adjustment Interval Type 0~100 N/A %

CQI Adjustment Interval Type -10~26 N/A None

CQI Adjustment Interval Type 0~1000 N/A None

CQI Adjustment Interval Type 0~1024 N/A None

None Interval Type 0~255 N/A None

DL 2*2 MIMO
NOT_CFG(Not
DL 4*2 MIMO
configure),
DL 4x4 MIMO NOT_CFG~0,
FIXED_CFG(Fixed
DL 2-Layer MIMO Enumeration Type FIXED_CFG~1, None
configure),
Based on TM9 ADAPTIVE_CFG~2
ADAPTIVE_CFG(A
DL 4-Layer MIMO
DAPTIVE_CFG)
Based on TM9

DL 2*2 MIMO
based on TM9
DL 4*2 MIMO
ms5(ms5),
based on TM9
ms10(ms10), ms5~0, ms10~1,
DL 8x2 MIMO
Enumeration Type ms20(ms20), ms20~2, ms40~3, None
based on TM9
ms40(ms40), ms80~4
DL 4x4 MIMO
ms80(ms80)
based on TM9
DL 8x4 MIMO
based on TM9

NotConfigCsiRs(No
tConfigCsiRs), NotConfigCsiRs~0,
None Enumeration Type None
ConfigCsiRs(Config ConfigCsiRs~1
CsiRs)
DL 2*2 MIMO
DL 4*2 MIMO
DL 4x4 MIMO
DL 2-Layer MIMO Interval Type 1~1200 N/A None
Based on TM9
DL 4-Layer MIMO
Based on TM9
DL 2*2 MIMO
DL 4*2 MIMO
DL 4x4 MIMO
DL 2-Layer MIMO Interval Type 1~1200 N/A None
Based on TM9
DL 4-Layer MIMO
Based on TM9
DL 2*2 MIMO
DL 4*2 MIMO
DL 4x4 MIMO
DL 2-Layer MIMO Interval Type 0~100 N/A %
Based on TM9
DL 4-Layer MIMO
Based on TM9
DL 2*2 MIMO
DL 4*2 MIMO
DL 4x4 MIMO
DL 2-Layer MIMO Interval Type 0~100 N/A %
Based on TM9
DL 4-Layer MIMO
Based on TM9

None Interval Type 0~255 N/A None

Coordinated
Scheduling based
Power
Control(Cloud BB)
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Coordinated
Scheduling based
Power Control
(Cloud BB)
Coordinated
Scheduling based
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Power
Control(Cloud BB)

Coordinated
Scheduling based
Interval Type 1~60 N/A s
Power
Control(Cloud BB)
Coordinated
Scheduling based
Interval Type 1~50 N/A 100ms
Power
Control(Cloud BB)

Coordinated
Scheduling based
Power
Control(Cloud BB)
Interval Type 0~100 N/A None
Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
Interval Type 0~100 N/A None
Power
Control(Cloud BB)

Coordinated
Scheduling based
Interval Type 0~100 N/A None
Power
Control(Cloud BB)
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

the routes between

the board
functioning as the
centralized control
node and other
boards),
SCH_FAILURE(The
CELL_INST_UNIN
board used for
STALL~0,
enhanced
SWITCH_OFF~1,
scheduling is faulty
NO_COMMAND~2,
or unavailable),
ROUTE_FAILURE~
HIGH_LOAD(The
3,
board is heavily
SCH_FAILURE~4,
loaded),
HIGH_LOAD~5,
CLOCK_FAILURE(
CLOCK_FAILURE~
The clock accuracy
6,
does not meet the
NOT_IN_CLUSTER
requirement),
~7,
None Enumeration Type NOT_IN_CLUSTER None
SCTP_FAILURE~8,
(The cell is not
GTPU_FAILURE~9,
configured in the
LOW_PAYLOAD~1
cluster or the
0,
configuration does
LINK_CONGESTIO
not take effect),
N~11,
SCTP_FAILURE(Th
RTT_DELAY~12,
e SCTP link
MULTI_CLUSTER_
between the
ABNORMAL~13,
eNodeB and the
MODE_CONFLICT
eCoordinator is
~14, NULL~254,
faulty),
UNKNOWN~255
GTPU_FAILURE(T
he GTP-U tunnel
between the
eNodeB and the
eCoordinator is
faulty),
LOW_PAYLOAD(Lo
MACRO(Macro),
MACRO~0,
None Enumeration Type MICRO(Micro), None
MICRO~1, NA~2
NA(NA)
 ,
CELL_STATUS_AB
NORMAL(Cell
status abnormal),
CLOCK_ABNORM
AL(Clock
inaccurate),
DLCOMP_STATUS
DLCOMP_SWITCH
_NORMAL~0,
_OFF_OR_NO_LIC
CELL_STATUS_AB
ENSE(DL COMP
NORMAL~1,
disabled or no
CLOCK_ABNORM
license),
AL~2,
CLUSTER_ABNOR
DLCOMP_SWITCH
MAL(Clustering
_OFF_OR_NO_LIC
node unavailable),
ENSE~3,
LINK_ABNORMAL(
CLUSTER_ABNOR
Link disconnected),
MAL~4,
LINK_CONGESTIO
LINK_ABNORMAL
None Enumeration Type N(Link congested), None
~5,
RTT_DELAY(RTT
LINK_CONGESTIO
delay exceeding the
N~6,
threshold),
RTT_DELAY~7,
MULTI_CLUSTER_
MULTI_CLUSTER_
ABNORMAL(Mana
ABNORMAL~8,
ged by multiple
NO_COMMAND_R
clustering nodes),
ECEIVED~9,
NO_COMMAND_R
CONTROL_NODE_
ECEIVED(Centraliz
FAILURE~10,
ed Control Node
OTHER_ABNORM
Command Not
AL~255
Received),
CONTROL_NODE_
FAILURE(Faulty
Centralized Control
Node or No
Centralized Control
Node),

None Interval Type 0~255 N/A None

GSM and LTE FDD
Dynamic Spectrum Interval Type 0~20 N/A None
Sharing(LTE FDD)
GSM and LTE FDD
Dynamic Spectrum Interval Type 0~20 N/A None
Sharing(LTE FDD)
GSM and LTE FDD
Dynamic Spectrum Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Sharing(LTE FDD)
 NONE(NONE),
BASEBANDPROC NONE~0,
GSM and LTE FDD ESS(BASEBANDP BASEBANDPROC
Dynamic Spectrum Enumeration Type ROCESS), ESS~1, None
Sharing(LTE FDD) ADAPTIVEPROCE ADAPTIVEPROCE
SS(ADAPTIVEPRO SS~2
CESS)
GSM and LTE FDD
Dynamic Spectrum Interval Type -30~30 N/A 0.5dB
Sharing(LTE FDD)
GSM and LTE FDD
Dynamic Spectrum Interval Type -30~30 N/A 0.5dB
Sharing(LTE FDD)
GSM and LTE FDD
Dynamic Spectrum Interval Type 0~15 N/A dB
Sharing(LTE FDD)
GSM and LTE FDD
Dynamic Spectrum Interval Type 0~15 N/A dB
Sharing(LTE FDD)
GSM and LTE FDD
Dynamic Spectrum Interval Type 0~15 N/A dB
Sharing(LTE FDD)

ECOCONFIG( ECO
GSM and LTE FDD CONFIG), ECOCONFIG~0,
Dynamic Spectrum Enumeration Type ENODEBAIDCONF ENODEBAIDCONF None
Sharing(LTE FDD) IG( ENODEBAIDC IG~1
ONFIG)
None Interval Type 0~255 N/A None

Intelligent Access
Interval Type 10~60 N/A s
Class Control

Intelligent Access
Interval Type 0~100 N/A %
Class Control
Intelligent Access
Interval Type 0~100 N/A %
Class Control

Dynamic Service
Specific Access Interval Type 1~1000 N/A None
Control
Dynamic Service
Specific Access Interval Type 1~1000 N/A None
Control
 ETWS_PN(ETWS
PN),
Dynamic Service ETWS_PN~0,
ETWS_PN_TEST(E
Specific Access Bit Field Type ETWS_PN_TEST~ None
TWS PN FOR
Control 1, CMAS~2
TEST),
CMAS(CMAS)

Dynamic Service
Specific Access Interval Type 1~10080 N/A min
Control
Intelligent Access
Interval Type 1~1000 N/A None
Class Control

Intelligent Access
Interval Type 1~1000 N/A None
Class Control

None Interval Type 0~255 N/A None

 ms), _PER_FIVE~3,
SUBFRAME_5_TW SUBFRAME_0_TW
O_PER_20(Two O_PER_20~4,
ABS with 5 per 20 SUBFRAME_3_TW
ms), O_PER_20~5,
SUBFRAME_8_TW SUBFRAME_4_TW
O_PER_20(Two O_PER_20~6,
ABS with 8 per 20 SUBFRAME_5_TW
ms), O_PER_20~7,
SUBFRAME_9_TW SUBFRAME_8_TW
O_PER_20(Two O_PER_20~8,
ABS with 9 per 20 SUBFRAME_9_TW
ms), O_PER_20~9,
SUBFRAME_4_9_T SUBFRAME_4_9_T
HREE_PER_20(Thr HREE_PER_20~10
ee ABS with 4/9 per ,
20 ms), SUBFRAME_0_5_T
SUBFRAME_0_5_T HREE_PER_20~11
HREE_PER_20(Thr ,
Static TDM eICIC Enumeration Type None
ee ABS with 0/5 per SUBFRAME_3_8_T
20 ms), HREE_PER_20~12
SUBFRAME_3_8_T ,
HREE_PER_20(Thr SUBFRAME_3_4_9
ee ABS with 3/8 per _THREE_PER_20~
20 ms), 13,
SUBFRAME_3_4_9 SUBFRAME_0_5_F
_THREE_PER_20( OUR_PER_20~14,
Three ABS with SUBFRAME_4_9_F
3/4/9 per 20 ms), OUR_PER_20~15,
SUBFRAME_0_5_F SUBFRAME_3_8_F
OUR_PER_20(Four OUR_PER_20~16,
ABS with 0/5 per 20 SUBFRAME_0_4_9
ms), _FIVE_PER_20~17
SUBFRAME_4_9_F ,
OUR_PER_20(Four SUBFRAME_0_5_9
ABS with 4/9 per 20 _FIVE_PER_20~18
ms), ,
SUBFRAME_3_8_F SUBFRAME_3_4_8
 DISABLE(Disable), DISABLE~0,
Static TDM eICIC Enumeration Type None
ENABLE(Enable) ENABLE~1
Static TDM
eICIC/Dynamic Interval Type -30~30 N/A 0.5dB
TDM eICIC

Dynamic TDM
Interval Type 1~300 N/A s
eICIC
eICIC Auto Group
Interval Type 1~1000000 N/A None
Configuration

eICIC Auto Group

Interval Type 0~100 N/A %
Configuration
 AUTO(AUTO),
eICIC Auto Group AUTO~0,
Enumeration Type CONTROLLED(CO None
Configuration CONTROLLED~1
NTROLLED)

eICIC Auto Group

Interval Type 1~43200 N/A min
Configuration
None Interval Type 0~255 N/A None

CustomFrameOffse
t(User-defined
frame offset),
CustomFrameOffse
TL_FrameOffset(T-
t~0,
L Dual Mode frame
None Enumeration Type TL_FrameOffset~1, None
offset),
TL_FrameOffset_S
TL_FrameOffset_S
A2_SSP5~2
A2_SSP5(T-L Dual
Mode SA2+SSP5
frame offset)
 0~261120,275943~
None Interval Type N/A Ts
307200

None Interval Type 0~255 N/A None

None Interval Type -30~30 N/A 0.5dB

None Interval Type -140~-44 N/A dBm

None Interval Type 0~255 N/A None

Low Power
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Consumption Mode
Low Power
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Consumption Mode

Low Power
Compound Type 00:00:00~23:59:59 N/A None
Consumption Mode

Low Power
Compound Type 00:00:00~23:59:59 N/A None
Consumption Mode
Low Power
Interval Type 0~1440 N/A min
Consumption Mode

Low Power
Interval Type 0~1440 N/A min
Consumption Mode

Low Power
Interval Type 0~1440 N/A min
Consumption Mode
Low Power
Interval Type 10~100 N/A %
Consumption Mode

Low Power
Interval Type -10~0 N/A dB
Consumption Mode
Low Power
Interval Type 1~1440 N/A min
Consumption Mode
 CUSTOMIZED(Cus
CUSTOMIZED~0,
tomized),
Low Power POLICY1~1,
Enumeration Type POLICY1(Policy1), None
Consumption Mode POLICY2~2,
POLICY2(Policy2),
POLICY3~3
POLICY3(Policy3)

None Interval Type 0~255 N/A None

eMBMS Phase 1
based on
Interval Type 0~255 N/A None
Centralized MCE
Architecture
eMBMS Phase 1
based on
Interval Type 0~65535 N/A None
Centralized MCE
Architecture

eMBMS Phase 1
based on
String Type 0~2000 characters N/A None
Centralized MCE
Architecture

eMBMS Phase 1
based on MBMSSwitch(MBM
Bit Field Type MBMSSwitch~0 None
Centralized MCE SSwitch)
Architecture

eMBMS Phase 1
based on
ServiceAreaIdRef[] 0~6 N/A None
Centralized MCE
Architecture

None Interval Type 1~65535 N/A None

eMBMS Service SERVICECONTINU SERVICECONTINU
Bit Field Type None
Continuity ITYSWITCH ITYSWITCH~0
eMBMS Phase 1
NEIGHCELLCONFI NEIGHCELLCONFI
based on
Bit Field Type GADAPTIVESWITC GADAPTIVESWITC None
Centralized MCE
H H~0
Architecture

None String Type 0~100 characters N/A None

None Interval Type 0~255 N/A None

Intra-LTE Load
Interval Type 0~255 N/A None
Balancing
Intra-LTE Load
Interval Type 0~255 N/A None
Balancing
Intra-LTE Load
Interval Type 0~255 N/A None
Balancing
Intra-LTE Load
Interval Type 0~255 N/A None
Balancing

Intra-LTE Load
Interval Type 1~15 N/A None
Balancing
Intra-LTE Load
Interval Type 0~28 N/A None
Balancing

None Interval Type 0~255 N/A None

 NOT_CFG(Not
Mobility Robust NOT_CFG~0,
Enumeration Type configure), None
Optimization(MRO) CFG~1
CFG(Configure)
 dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
dB0(0dB), dB-3~12, dB-2~13,
Mobility Robust dB1(1dB), dB-1~14, dB0~15,
Enumeration Type dB
Optimization(MRO) dB2(2dB), dB1~16, dB2~17,
dB3(3dB), dB3~18, dB4~19,
dB4(4dB), dB5~20, dB6~21,
dB5(5dB), dB8~22, dB10~23,
dB6(6dB), dB12~24, dB14~25,
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
dB0(0dB), dB-3~12, dB-2~13,
Mobility Robust dB1(1dB), dB-1~14, dB0~15,
Enumeration Type dB
Optimization(MRO) dB2(2dB), dB1~16, dB2~17,
dB3(3dB), dB3~18, dB4~19,
dB4(4dB), dB5~20, dB6~21,
dB5(5dB), dB8~22, dB10~23,
dB6(6dB), dB12~24, dB14~25,
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
Mobility Robust
Interval Type -140~-43 N/A dBm
Optimization(MRO)

Mobility Robust
Interval Type -140~-43 N/A dBm
Optimization(MRO)

Mobility Robust
Interval Type -140~-43 N/A dBm
Optimization(MRO)

Mobility Robust
Interval Type -140~-43 N/A dBm
Optimization(MRO)
 InterfreqA1RsrpSwit
ch(InterfreqA1Rsrp
Switch),
InterfreqA2RsrpSwit InterfreqA1RsrpSwit
ch(InterfreqA2Rsrp ch~0,
Switch), InterfreqA2RsrpSwit
A3InterfreqA1Rsrp ch~1,
Switch(A3InterfreqA A3InterfreqA1Rsrp
1RsrpSwitch), Switch~2,
Mobility Robust A3InterfreqA2Rsrp A3InterfreqA2Rsrp
Bit Field Type None
Optimization(MRO) Switch(A3InterfreqA Switch~3,
2RsrpSwitch), InterfreqA3CioSwitc
InterfreqA3CioSwitc h~4,
h(InterfreqA3CioSwi InterfreqA4CioSwitc
tch), h~5,
InterfreqA4CioSwitc InterfreqA5Switch~
h(InterfreqA4CioSwi 6
tch),
InterfreqA5Switch(I
nterfreqA5Switch)

None Interval Type 0~255 N/A None

 SRSPC_SINR_BAS
ED( SRSPC_SINR_
SRSPC_SINR_BAS
BASED),
Uplink Power ED~0,
Enumeration Type SRSPC_SINR_RS None
Control SRSPC_SINR_RS
RP_BASED( SRSP
RP_BASED~1
C_SINR_RSRP_BA
SED)
 NOT_USE_P0NOM
INALPUCCH(Not
Use NOT_USE_P0NOM
Uplink Power P0NominalPUCCH) INALPUCCH~0,
Enumeration Type None
Control , USE_P0NOMINAL
USE_P0NOMINAL PUCCH~1
PUCCH(Use
P0NominalPUCCH)

Uplink Power
Interval Type 1~10 N/A 20ms
Control
Uplink Power
Interval Type 0~15 N/A dB
Control

Uplink Power
Interval Type -126~24 N/A dBm
Control
None Interval Type -30~30 N/A 0.5dB
NI based Power
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Control
 80dB~0, 85dB~1,
90dB~2, 95dB~3,
80dB, 85dB, 90dB, 100dB~4, 105dB~5,
95dB, 100dB, 110dB~6, 115dB~7,
105dB, 110dB, 120dB~8, 125dB~9,
NI based Power 115dB, 120dB, 130dB~10,
Enumeration Type None
Control 125dB, 130dB, 135dB~11,
135dB, 140dB, 140dB~12,
145dB, 150dB, 145dB~13,
155dB, 160dB 150dB~14,
155dB~15,
160dB~16
Uplink Power
Interval Type -50~50 N/A dB
Control
Uplink Power
Interval Type -140~-43 N/A dBm
Control
 1~1, 2~2, 3~3, 4~4,
5~5, 6~6, 7~7, 8~8,
Dynamic 1, 2, 3, 4, 5, 6, 7, 8,
9~9, 10~10, 11~11,
Scheduling 9, 10, 11, 12, 13,
Enumeration Type 12~12, 13~13, None
Uplink Power 14, 15, 16,
14~14, 15~15,
Control ADAPTIVE
16~16,
ADAPTIVE~17
 Normal(0), Us(1), Normal~0, Us~1,
Uplink Power
Enumeration Type ULBigPkt(2), ULBigPkt~2, None
Control
UsOrUlBigPkt(3) UsOrUlBigPkt~3
Uplink Power
Interval Type 0~10 N/A None
Control
 1~1, 2~2, 3~3, 4~4,
5~5, 6~6, 7~7, 8~8,
1, 2, 3, 4, 5, 6, 7, 8,
9~9, 10~10, 11~11,
Uplink Power 9, 10, 11, 12, 13,
Enumeration Type 12~12, 13~13, None
Control 14, 15, 16,
14~14, 15~15,
SameAsNs
16~16,
SameAsNs~17
Interference Based
Uplink Power Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Control

Interference Based
Uplink Power Interval Type 70~140 N/A dB
Control
Interference Based
Uplink Power Interval Type -118~-100 N/A dBm
Control
 AllUser(AllUser),
Uplink Power AllUser~0,
Enumeration Type UlBigPktUser(UlBig None
Control UlBigPktUser~1
PktUser)
Uplink Power
Interval Type -100~0 N/A 0.1dB
Control

None Interval Type 0~255 N/A None

Intra-LTE Load
Interval Type 1~100 N/A %
Balancing
Intra-LTE Load
Interval Type 1~100 N/A %
Balancing

Intra-LTE Load
Interval Type 0~50 N/A %
Balancing
Intra-LTE Load
Interval Type 1~100 N/A %
Balancing

None Interval Type 0~255 N/A None

Random Access
Interval Type 0~100000 N/A m
Procedure
Random Access
Interval Type -100~1000 N/A %
Procedure

RACH Optimization String Type 2~3 characters N/A None

RACH Optimization Interval Type 0~1048575 N/A None

RACH Optimization Interval Type 0~255 N/A None

RACH Optimization String Type 3 characters N/A None

None Interval Type 10~600 N/A s

None Interval Type -115~-80 N/A dBm

None Interval Type 5~35 N/A dB

None Interval Type 0~255 N/A None

Admission Control Interval Type 1~15 N/A None

Admission Control Interval Type 1~15 N/A None

Admission Control Interval Type 10~99 N/A %

Admission Control Interval Type 10~99 N/A %

Admission Control Interval Type 10~99 N/A %

Admission Control Interval Type 10~99 N/A %

Admission Control Interval Type 0~90 N/A %

Admission Control Interval Type 0~90 N/A %
Admission Control Interval Type 0~90 N/A %
Congestion Control Interval Type 0~99 N/A %
Congestion Control Interval Type 0~99 N/A %
Congestion Control Interval Type 0~99 N/A %
Congestion Control Interval Type 0~99 N/A %
Congestion Control Interval Type 0~50 N/A %
Admission Control
Interval Type 10~100 N/A %
Congestion Control
Admission Control
Interval Type 10~100 N/A %
Congestion Control

Admission Control Interval Type 0~30 N/A None

Preferential Access
Interval Type 0~100 N/A None
for Voice Service

None Interval Type 1~10 N/A s

None Interval Type 0~255 N/A None

RF Channel
Intelligent Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Shutdown

RF Channel
Intelligent Compound Type 00:00:00~23:59:59 N/A None
Shutdown

RF Channel
Intelligent Compound Type 00:00:00~23:59:59 N/A None
Shutdown

RF Channel
Intelligent Interval Type 0~7 N/A dB
Shutdown
RF Channel
Intelligent Interval Type 0~100 N/A %
Shutdown
RF Channel
Intelligent Interval Type 0~100 N/A %
Shutdown
RF Channel
Intelligent Interval Type 0~100 N/A %
Shutdown
RF Channel
Intelligent Interval Type 0~100 N/A %
Shutdown
RF Channel
Intelligent Interval Type 0~20 N/A None
Shutdown
 RF_INTELLIGENT_
SHUTDOWN(Enteri
ng the RF channel
intelligent shutdown
state),
DELAY_FOR_30MI
NUTES(Not
entering because UE_CONNECTED_
the state is delayed EXCEED~0,
for 30 minutes), LOAD_SIMULATIO
WRONG_REQ_FO N_ENABLED~1,
R_PA_CCE(Not LCS_ENABLED~2,
entering because RF_INTELLIGENT_
the cell bandwidth, SHUTDOWN~3,
PA value, or CCE DELAY_FOR_30MI
aggregation level NUTES~4,
for common WRONG_REQ_FO
signaling does not R_PA_CCE~5,
None Enumeration Type meet requirements), WRONG_ANTENN None
WRONG_ANTENN AS_NUM~6,
AS_NUM(Not POWER_INFSUFFI
entering because CIENT~7,
the number of SWITCH_OFF~8,
antennas does not OTHERS~9,
meet requirements), MBSFN_ENABLED
POWER_INFSUFFI ~10,
CIENT(Not entering QCI1_UE_EXIST~1
because the power 1,
is insufficient), RB_RATIO_EXCEE
SWITCH_OFF(Not D~12
entering because
the switch is turned
off), OTHERS(Not
entering because of
other reasons),
MBSFN_ENABLED
(Not entering
 SWITCH_TURN_O
FF(The switch is
turned off),
TIME_EXPIRES(Ti
me expires),
UE_CONNECTED_
EXCEED(The
number of UEs in
connected mode
SWITCH_TURN_O
exceeds threshold),
FF~0,
POWER_INSUFFIC
TIME_EXPIRES~1,
IENT(The power is
UE_CONNECTED_
insufficient),
EXCEED~2,
INITIAL_ENTERIN
POWER_INSUFFIC
G(None (Initial
IENT~3,
entering)),
INITIAL_ENTERIN
LOAD_SIMULATIO
G~4,
N_ENABLE(Load
None Enumeration Type LOAD_SIMULATIO None
simulation is
N_ENABLE~5,
enabled),
LCS_ENABLED~6,
LCS_ENABLED(LC
OTHERS~7,
S is enabled),
MBSFN_ENABLED
OTHERS(0ther
~8,
reasons),
QCI1_UE_EXIST~9
MBSFN_ENABLED
,
(MBSFN shutdown
RB_RATIO_EXCEE
switch and symbol
D~10
shutdown switch
are all enabled),
QCI1_UE_EXIST(T
he existence of
QCI=1 UEs),
RB_RATIO_EXCEE
D(The UL/DL PRB
ratio exceeds the
PRB threshold)

None Interval Type 0~255 N/A None

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
configuration type 7
Optional uplink-
Interval Type 0~2 N/A None
downlink subframe
configuration
uplink-downlink
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
configuration type 7
Optional uplink-
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
downlink subframe
configuration
uplink-downlink
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5

None Interval Type 0~255 N/A None

 CellConStaReportS
witch(CellConStaRe
portSwitch), CellConStaReportS
FPIGTPUSwitch(FP witch~0,
IGTPUSwitch), FPIGTPUSwitch~1,
None Bit Field Type DSCPRemarkSwitc DSCPRemarkSwitc None
h(DSCPRemarkSwi h~2,
tch), CellUuConStaRepo
CellUuConStaRepo rtSwitch~3
rtSwitch(CellUuCon
StaReportSwitch)
None Interval Type 1~100 N/A %
None Interval Type 1~100 N/A %
None Interval Type 1~10000 N/A None
None Interval Type 1~10000 N/A None
None Interval Type 0~100 N/A None
None Interval Type 0~100 N/A None
None Interval Type 0~100 N/A None

None Interval Type 0~100 N/A None

None Interval Type 0~100 N/A None

None Interval Type 0~100 N/A None

None Interval Type 0~100 N/A None

None Interval Type 0~255 N/A None

Intelligent Power-
Off of Carriers in Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
the Same Coverage
Intelligent Power-
Off of Carriers in Compound Type 00:00:00~23:59:59 N/A None
the Same Coverage

Intelligent Power-
Off of Carriers in Compound Type 00:00:00~23:59:59 N/A None
the Same Coverage

Intelligent Power-
Off of Carriers in Interval Type 0~100 N/A %
the Same Coverage

Intelligent Power-
Off of Carriers in Interval Type 0~100 N/A %
the Same Coverage

Intelligent Power-
Off of Carriers in Interval Type 0~100 N/A %
the Same Coverage
Intelligent Power-
Off of Carriers in Interval Type 0~100 N/A %
the Same Coverage

None Interval Type 0~255 N/A None

SRLTE
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Optimization
SRLTE
Interval Type 1~15 N/A None
Optimization
SRLTE
Interval Type 1~120 N/A ms
Optimization

None Interval Type 0~255 N/A None

Uplink Static Inter-
Cell Interference
Coordination
Uplink Dynamic Interval Type -30~30 N/A 0.5dB
Inter-Cell
Interference
Coordination

None Interval Type 0~255 N/A None

 ULSCH_STRATEG
ULSCH_STRATEG
Y_EPF(EPF),
Y_EPF~0,
Basic Scheduling ULSCH_STRATEG
ULSCH_STRATEG
Dynamic Y_MAX_CI(MAX_C
Y_MAX_CI~1,
Scheduling Enumeration Type I), None
ULSCH_STRATEG
Enhanced ULSCH_STRATEG
Y_PF~2,
Scheduling Y_PF(PF),
ULSCH_STRATEG
ULSCH_STRATEG
Y_RR~3
Y_RR(RR)
UL Synchronous ADAPTIVE_HARQ_
ADAPTIVE_HARQ_
HARQ SW_ON(On),
SW_ON~0,
Basic Scheduling ADAPTIVE_HARQ_
ADAPTIVE_HARQ_
Enhanced Enumeration Type SW_OFF(Off), None
SW_OFF~1,
Scheduling ADAPTIVE_HARQ_
ADAPTIVE_HARQ_
Dynamic SW_SEMI_ON(Se
SW_SEMI_ON~2
Scheduling miOn)
AMC
Interval Type 1~99 N/A None
UL 64QAM

Dynamic
Interval Type 0~100 N/A %
Scheduling
Dynamic
Interval Type 1~40 N/A ms
Scheduling

Dynamic
Interval Type 45~1500 N/A byte
Scheduling
 HOPPING_OFF(Ho
pping off), HOPPING_OFF~0,
HOPPING_TYPE1( HOPPING_TYPE1~
Basic Scheduling Hopping Type 1), 1,
Enhanced Enumeration Type HOPPING_TYPE2( HOPPING_TYPE2~ None
Scheduling Hopping Type 2), 2,
HOPPING_TYPE2_ HOPPING_TYPE2_
RANDOM(Hopping RANDOM~3
Type 2 Random)
Admission Control
Interval Type 0~100 N/A %
Congestion Control
Dynamic
Interval Type 16~15000 N/A bit
Scheduling

Dynamic
Interval Type 2~3 N/A None
Scheduling
Dynamic
Scheduling
Interval Type 0~2000 N/A ms
Enhanced
Scheduling

EPF_CAPC_FACT EPF_CAPC_FACT
OR_1(1), OR_1~0,
EPF_CAPC_FACT EPF_CAPC_FACT
OR_0DOT01(0.01), OR_0DOT01~1,
EPF_CAPC_FACT EPF_CAPC_FACT
Dynamic OR_0DOT5(0.5), OR_0DOT5~2,
Enumeration Type None
Scheduling EPF_CAPC_FACT EPF_CAPC_FACT
OR_2(2), OR_2~3,
EPF_CAPC_FACT EPF_CAPC_FACT
OR_3(3), OR_3~4,
EPF_CAPC_FACT EPF_CAPC_FACT
OR_4(4) OR_4~5
 FS_NONFS_ADAP
TIVE(Fs nonFs
FS_NONFS_ADAP
Strategy),
Dynamic TIVE~0,
Enumeration Type FS_INRANDOM_A None
Scheduling FS_INRANDOM_A
DAPTIVE(Fs
DAPTIVE~1
InRandom
Strategy)
 CLASS_0(CLASS_
Dynamic 0), CLASS_0~0,
Enumeration Type None
Scheduling CLASS_1(CLASS_ CLASS_1~1
1)
Basic Scheduling Interval Type 1~8 N/A None
Dynamic
Interval Type 0~2000 N/A ms
Scheduling
 ms20(20ms),
VoIP Semi-
ms40(40ms), ms20~0, ms40~1,
persistent Enumeration Type None
ADAPTIVE(ADAPTI ADAPTIVE~2
Scheduling
VE)
Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management

Dynamic
Interval Type 0~4 N/A None
Scheduling
 NO_DELAYSCH(N
o Delay
Scheduling),
VOIP_DELAYSCH(
NO_DELAYSCH~0,
VoIP Service Delay
Dynamic VOIP_DELAYSCH~
Scheduling),
Scheduling 1,
VOIP_DELAYSCH_
Voice Characteristic Enumeration Type VOIP_DELAYSCH_ None
DIVISION(VoIP
Awareness DIVISION~2,
Service-based
Scheduling VOIP_AND_DATA_
Delay Scheduling),
DELAYSCH~3
VOIP_AND_DATA_
DELAYSCH(VoIP
and Data Delay
Scheduling)
Enhanced
Scheduling Interval Type 6~120 N/A None
Basic Scheduling
None Interval Type 0~100000 N/A bit

VoIP Semi-
persistent Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Scheduling
 NEW_TX(NEW_TX
NEW_TX~0,
Dynamic ),
Enumeration Type ADAPTIVE_RETX~ None
Scheduling ADAPTIVE_RETX(
1
ADAPTIVE_RETX)
Dynamic
Interval Type 0~20 N/A None
Scheduling
 UlVoipPreAllocation
Swtich(UlVoipPreAll
ocationSwtich),
UlVoipDelaySchSwi
tch(UlVoipDelaySch
UlVoipPreAllocation
Switch),
Swtich~0,
UlVoIPLoadBasedS
UlVoipDelaySchSwi
Dynamic chSwitch(UlVoIPLo
tch~1,
Scheduling adBasedSchSwitch
UlVoIPLoadBasedS
VoIP Semi- ),
chSwitch~2,
persistent UlVoipSchOptSwitc
UlVoipSchOptSwitc
Scheduling Bit Field Type h(UlVoipSchOptSwi None
h~3,
TTI Bundling tch),
UlVoLTEDataSizeE
Voice Characteristic UlVoLTEDataSizeE
stSwitch~4,
Awareness stSwitch(UlVoLTED
UlVoipServStateEn
Scheduling ataSizeEstSwitch),
hancedSw~5,
UlVoipServStateEn
UlVoipRblerControl
hancedSw(UlVoipS
Switch~7
ervStateEnhancedS
w),
UlVoipRblerControl
Switch(UlVoipRbler
ControlSwitch)
Dynamic
Interval Type -500~500 N/A 0.1dB
Scheduling
Intra-eNodeB
Coordinated Uplink
AMC
Interval Type -30~30 N/A 0.5dB
Inter-eNodeB
Coordinated Uplink
AMC
 N5_TTIB_ENTER(5 N5_TTIB_ENTER~
), 0,
N10_TTIB_ENTER( N10_TTIB_ENTER
10), ~1,
TTI Bundling Enumeration Type None
N15_TTIB_ENTER( N15_TTIB_ENTER
15), ~2,
N20_TTIB_ENTER( N20_TTIB_ENTER
20) ~3
 N10_TTIB_EXIT(10
),
N20_TTIB_EXIT(20 N10_TTIB_EXIT~0,
), N20_TTIB_EXIT~1,
TTI Bundling Enumeration Type None
N40_TTIB_EXIT(40 N40_TTIB_EXIT~2,
), N80_TTIB_EXIT~3
N80_TTIB_EXIT(80
)
TTI Bundling Interval Type 3~6 N/A None
TTI Bundling Interval Type 0~7 N/A None

n4(4), n8(8),
n4~0, n8~1, n12~2,
n12(12), n16(16),
TTI Bundling Enumeration Type n16~3, n20~4, None
n20(20), n24(24),
n24~5, n28~6
n28(28)
 SERVICE_VOIP(S
ERVICE_VOIP), SERVICE_VOIP~0,
TTI Bundling Enumeration Type SERVICE_MULTIA SERVICE_MULTIA None
PP(SERVICE_MUL PP~1
TIAPP)
 FastReportDopSwit
FastReportDopSwit
None Bit Field Type ch(FastReportDopS None
ch~0
witch)
UL 2x4 MU-MIMO /
UL 2x8 MU-MIMO /
UL 2x8 MU- Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None
MIMO(per Cell)
(TDD)
Dynamic
Interval Type 0~10000 N/A None
Scheduling
Dynamic
Interval Type 0~1000000 N/A bit
Scheduling
 0bit~0, 32bit~1,
0bit, 32bit, 48bit,
Dynamic 48bit~2, 64bit~3,
Enumeration Type 64bit, 80bit, 96bit, None
Scheduling 80bit~4, 96bit~5,
128bit
128bit~6

SAME_AS_OTHER
_SERVICE(SAME_
SAME_AS_OTHER
AS_OTHER_SERVI
_SERVICE~0,
Dynamic CE), 1ms(1ms),
Enumeration Type 1ms~1, 2ms~2, None
Scheduling 2ms(2ms),
3ms~3, 4ms~4,
3ms(3ms),
5ms~5
4ms(4ms),
5ms(5ms)
 SAME_AS_OTHER
_SERVICE(SAME_
AS_OTHER_SERVI
CE),
SAME_AS_OTHER
80BYTE(80BYTE),
_SERVICE~0,
160BYTE(160BYTE
80BYTE~1,
),
Dynamic 160BYTE~2,
Enumeration Type 320BYTE(320BYTE None
Scheduling 320BYTE~3,
),
640BYTE~4,
640BYTE(640BYTE
1280BYTE~5,
),
2560BYTE~6
1280BYTE(1280BY
TE),
2560BYTE(2560BY
TE)

TWO_MODE_BAS TWO_MODE_BAS
Dynamic ED_ON_PCI(), ED_ON_PCI~0,
Enumeration Type None
Scheduling THREE_MODE_BA THREE_MODE_BA
SED_ON_PCI() SED_ON_PCI~1
AMC
Interval Type 1~99 N/A None
Voice-Specific AMC
Adaptive
Interval Type 2~1800 N/A s
SFN/SDMA

2LAYER(2LAYER), 2LAYER~0,
UL 4-Layer MU-
Enumeration Type 3LAYER(3LAYER), 3LAYER~1, None
MIMO
4LAYER(4LAYER) 4LAYER~2
 INTERVAL_5(INTE
RVAL_5),
INTERVAL_10(INT
ERVAL_10),
INTERVAL_20(INT INTERVAL_5~0,
ERVAL_20), INTERVAL_10~1,
INTERVAL_30(INT INTERVAL_20~2,
ERVAL_30), INTERVAL_30~3,
Dynamic
Enumeration Type INTERVAL_40(INT INTERVAL_40~4, ms
Scheduling
ERVAL_40), INTERVAL_50~5,
INTERVAL_50(INT INTERVAL_60~6,
ERVAL_50), INTERVAL_ADAPT
INTERVAL_60(INT IVE~7
ERVAL_60),
INTERVAL_ADAPT
IVE(INTERVAL_AD
APTIVE)
 INTERVAL_10(INT
ERVAL_10),
INTERVAL_20(INT
ERVAL_20),
INTERVAL_30(INT INTERVAL_10~0,
ERVAL_30), INTERVAL_20~1,
INTERVAL_40(INT INTERVAL_30~2,
Dynamic ERVAL_40), INTERVAL_40~3,
Enumeration Type ms
Scheduling INTERVAL_50(INT INTERVAL_50~4,
ERVAL_50), INTERVAL_70~5,
INTERVAL_70(INT INTERVAL_80~6,
ERVAL_70), INTERVAL_160~7
INTERVAL_80(INT
ERVAL_80),
INTERVAL_160(IN
TERVAL_160)
 SinrFlunIBlerAdapt
Switch(SinrFlunIBle SinrFlunIBlerAdapt
rAdaptSwitch), Switch~0,
AMC Bit Field Type None
SinrJumpIBlerAdapt SinrJumpIBlerAdapt
Switch(SinrJumpIBl Switch~1
erAdaptSwitch)
Enhanced DL
CsiOnly(CsiOnly),
Frequency CsiOnly~0,
Enumeration Type CsiWiUlService(Csi None
Selective CsiWiUlService~1
WiUlService)
Scheduling

Dynamic
Interval Type 0~94 N/A None
Scheduling
 N5(5), N10(10), N5~0, N10~1,
N15(15), N20(20), N15~2, N20~3,
Dynamic
Enumeration Type N25(25), N30(30), N25~4, N30~5, RB
Scheduling
N35(35), N40(40), N35~6, N40~7,
N45(45), N50(50) N45~8, N50~9
AMC Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

UL 2*4 MU-MIMO VmimoOptResSwitc

VmimoOptResSwitc
UL 2*8 MU-MIMO Bit Field Type h(VmimoOptResSw None
h~0
2*8 MU-MIMO itch)
Intra-eNodeB
Coordinated Uplink Interval Type -121~-90 N/A dBm
AMC

UL Unifed Overload
Interval Type 0~255 N/A None
Control
UL Unifed Overload
Interval Type 0~200 N/A %
Control
UL Unifed Overload
Interval Type 0~200 N/A %
Control
UL Unifed Overload
Interval Type 1~20000 N/A None
Control
UL Unifed Overload
Interval Type 1~20000 N/A None
Control
UL Unifed Overload
Interval Type 1~1200 N/A None
Control
UL Unifed Overload
Interval Type 1~1200 N/A None
Control

None Interval Type 0~255 N/A None

 arameter0_bit10), ~6,
RsvdSwPara0_bit1 RsvdSwPara0_bit8
1(ReservedSwitchP ~7,
arameter0_bit11), RsvdSwPara0_bit9
RsvdSwPara0_bit1 ~8,
2(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit12), 0~9,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
3(ReservedSwitchP 1~10,
arameter0_bit13), RsvdSwPara0_bit1
RsvdSwPara0_bit1 2~11,
4(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit14), 3~12,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
5(ReservedSwitchP 4~13,
arameter0_bit15), RsvdSwPara0_bit1
RsvdSwPara0_bit1 5~14,
6(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit16), 6~15,
None Bit Field Type None
RsvdSwPara0_bit1 RsvdSwPara0_bit1
7(ReservedSwitchP 7~16,
arameter0_bit17), RsvdSwPara0_bit1
RsvdSwPara0_bit1 8~17,
8(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit18), 9~18,
RsvdSwPara0_bit1 RsvdSwPara0_bit2
9(ReservedSwitchP 0~19,
arameter0_bit19), RsvdSwPara0_bit2
RsvdSwPara0_bit2 1~20,
0(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit20), 2~21,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
1(ReservedSwitchP 3~22,
arameter0_bit21), RsvdSwPara0_bit2
RsvdSwPara0_bit2 4~23,
2(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit22), 5~24,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
 arameter1_bit10), ~6,
RsvdSwPara1_bit1 RsvdSwPara1_bit8
1(ReservedSwitchP ~7,
arameter1_bit11), RsvdSwPara1_bit9
RsvdSwPara1_bit1 ~8,
2(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit12), 0~9,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
3(ReservedSwitchP 1~10,
arameter1_bit13), RsvdSwPara1_bit1
RsvdSwPara1_bit1 2~11,
4(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit14), 3~12,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
5(ReservedSwitchP 4~13,
arameter1_bit15), RsvdSwPara1_bit1
RsvdSwPara1_bit1 5~14,
6(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit16), 6~15,
None Bit Field Type None
RsvdSwPara1_bit1 RsvdSwPara1_bit1
7(ReservedSwitchP 7~16,
arameter1_bit17), RsvdSwPara1_bit1
RsvdSwPara1_bit1 8~17,
8(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit18), 9~18,
RsvdSwPara1_bit1 RsvdSwPara1_bit2
9(ReservedSwitchP 0~19,
arameter1_bit19), RsvdSwPara1_bit2
RsvdSwPara1_bit2 1~20,
0(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit20), 2~21,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
1(ReservedSwitchP 3~22,
arameter1_bit21), RsvdSwPara1_bit2
RsvdSwPara1_bit2 4~23,
2(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit22), 5~24,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
 arameter2_bit10), ~6,
RsvdSwPara2_bit1 RsvdSwPara2_bit8
1(ReservedSwitchP ~7,
arameter2_bit11), RsvdSwPara2_bit9
RsvdSwPara2_bit1 ~8,
2(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit12), 0~9,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
3(ReservedSwitchP 1~10,
arameter2_bit13), RsvdSwPara2_bit1
RsvdSwPara2_bit1 2~11,
4(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit14), 3~12,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
5(ReservedSwitchP 4~13,
arameter2_bit15), RsvdSwPara2_bit1
RsvdSwPara2_bit1 5~14,
6(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit16), 6~15,
None Bit Field Type None
RsvdSwPara2_bit1 RsvdSwPara2_bit1
7(ReservedSwitchP 7~16,
arameter2_bit17), RsvdSwPara2_bit1
RsvdSwPara2_bit1 8~17,
8(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit18), 9~18,
RsvdSwPara2_bit1 RsvdSwPara2_bit2
9(ReservedSwitchP 0~19,
arameter2_bit19), RsvdSwPara2_bit2
RsvdSwPara2_bit2 1~20,
0(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit20), 2~21,
RsvdSwPara2_bit2 RsvdSwPara2_bit2
1(ReservedSwitchP 3~22,
arameter2_bit21), RsvdSwPara2_bit2
RsvdSwPara2_bit2 4~23,
2(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit22), 5~24,
RsvdSwPara2_bit2 RsvdSwPara2_bit2
 arameter3_bit10), ~6,
RsvdSwPara3_bit1 RsvdSwPara3_bit8
1(ReservedSwitchP ~7,
arameter3_bit11), RsvdSwPara3_bit9
RsvdSwPara3_bit1 ~8,
2(ReservedSwitchP RsvdSwPara3_bit1
arameter3_bit12), 0~9,
RsvdSwPara3_bit1 RsvdSwPara3_bit1
3(ReservedSwitchP 1~10,
arameter3_bit13), RsvdSwPara3_bit1
RsvdSwPara3_bit1 2~11,
4(ReservedSwitchP RsvdSwPara3_bit1
arameter3_bit14), 3~12,
RsvdSwPara3_bit1 RsvdSwPara3_bit1
5(ReservedSwitchP 4~13,
arameter3_bit15), RsvdSwPara3_bit1
RsvdSwPara3_bit1 5~14,
6(ReservedSwitchP RsvdSwPara3_bit1
arameter3_bit16), 6~15,
None Bit Field Type None
RsvdSwPara3_bit1 RsvdSwPara3_bit1
7(ReservedSwitchP 7~16,
arameter3_bit17), RsvdSwPara3_bit1
RsvdSwPara3_bit1 8~17,
8(ReservedSwitchP RsvdSwPara3_bit1
arameter3_bit18), 9~18,
RsvdSwPara3_bit1 RsvdSwPara3_bit2
9(ReservedSwitchP 0~19,
arameter3_bit19), RsvdSwPara3_bit2
RsvdSwPara3_bit2 1~20,
0(ReservedSwitchP RsvdSwPara3_bit2
arameter3_bit20), 2~21,
RsvdSwPara3_bit2 RsvdSwPara3_bit2
1(ReservedSwitchP 3~22,
arameter3_bit21), RsvdSwPara3_bit2
RsvdSwPara3_bit2 4~23,
2(ReservedSwitchP RsvdSwPara3_bit2
arameter3_bit22), 5~24,
RsvdSwPara3_bit2 RsvdSwPara3_bit2

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

Intelligent Power-
Off of Carriers in
the Same Coverage
of UMTS Network Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Multi-RAT Carrier
Joint Intelligent
Shutdown(eNodeB)

Intelligent Power-
Off of Carriers in
the Same Coverage
of UMTS Network Compound Type 00:00:00~23:59:59 N/A None
Multi-RAT Carrier
Joint Intelligent
Shutdown(eNodeB)
Intelligent Power-
Off of Carriers in
the Same Coverage
of UMTS Network Compound Type 00:00:00~23:59:59 N/A None
Multi-RAT Carrier
Joint Intelligent
Shutdown(eNodeB)

Intelligent Power-
Off of Carriers in
Interval Type 0~5000 N/A None
the Same Coverage
of UMTS Network
Intelligent Power-
Off of Carriers in
Interval Type 0~100 N/A %
the Same Coverage
of UMTS Network
Intelligent Power-
Off of Carriers in
Interval Type 0~100 N/A %
the Same Coverage
of UMTS Network
 BY_UTRAN_WITH
OUT_LOAD(By
UTRAN without
BY_UTRAN_WITH
load),
Intelligent Power- OUT_LOAD~0,
BY_UTRAN_WITH
Off of Carriers in BY_UTRAN_WITH
_LOAD(By UTRAN
the Same Coverage _LOAD~1,
with load),
of UMTS Network Enumeration Type BY_GERAN_WITH None
BY_GERAN_WITH
Multi-RAT Carrier _LOAD~2,
_LOAD(By GERAN
Joint Intelligent BY_UTRAN_AND_
with load),
Shutdown(eNodeB) GERAN_WITH_LO
BY_UTRAN_AND_
AD~3
GERAN_WITH_LO
AD( By UTRAN and
GERAN with load)

Multi-RAT Carrier
Joint Intelligent Interval Type 1~15 N/A None
Shutdown(eNodeB)
Multi-RAT Carrier
Joint Intelligent Interval Type 0~100 N/A %
Shutdown(eNodeB)
Multi-RAT Carrier
Joint Intelligent Interval Type 0~100 N/A %
Shutdown(eNodeB)
Multi-RAT Carrier
Joint Intelligent Interval Type 0~100 N/A %
Shutdown(eNodeB)
Multi-RAT Carrier
Joint Intelligent Interval Type 0~100 N/A %
Shutdown(eNodeB)
Multi-RAT Carrier
Joint Intelligent Interval Type 0~100 N/A %
Shutdown(eNodeB)
Multi-RAT Carrier
Joint Intelligent Interval Type 0~100 N/A %
Shutdown(eNodeB)

Coordinated
Scheduling based
Power Control
(Cloud BB)
Coordinated
Scheduling based
Power Control
Interval Type 0~255 N/A None
(Relaxed Backhaul)
Intra-eNodeB UL
CoMP
Intra-eNodeB UL
CoMP Phase II
UL CoMP based on
Coordinated BBU
Coordinated
Scheduling based
Power Control
(Cloud BB)
Coordinated
Scheduling based
Power Control
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
(Relaxed Backhaul)
Intra-eNodeB UL
CoMP
Intra-eNodeB UL
CoMP Phase II
UL CoMP based on
Coordinated BBU

Coordinated
Scheduling based
Power Control
(Cloud BB)
Coordinated
Scheduling based
Power Control
Interval Type -30~30 N/A 0.5dB
(Relaxed Backhaul)
Intra-eNodeB UL
CoMP
Intra-eNodeB UL
CoMP Phase II
UL CoMP based on
Coordinated BBU

None Interval Type 0~255 N/A None

DL 4x2 MIMO
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
DL 4x4 MIMO

DL 4x2 MIMO
Compound Type 00:00:00~23:59:59 N/A None
DL 4x4 MIMO
DL 4x2 MIMO
Interval Type 1~1440 N/A 0.5h
DL 4x4 MIMO

DL 4x2 MIMO
Interval Type 0~100 N/A 0.1m
DL 4x4 MIMO
Super Combined
Interval Type 0~255 N/A None
Cell

Super Combined
Interval Type 0~99 N/A None
Cell

None Interval Type 0~255 N/A None

UL Refarming Zero
Interval Type 0~99 N/A None
Bufferzone

UL Refarming Zero
Interval Type 0~99 N/A None
Bufferzone

UL Refarming Zero
Interval Type 0~100 N/A %
Bufferzone
UL Refarming Zero
Interval Type 0~100 N/A %
Bufferzone

UL Refarming Zero
Interval Type -140~-43 N/A dBm
Bufferzone

UL Refarming Zero
Interval Type 1~60 N/A dB
Bufferzone

UL Refarming Zero
Interval Type 0~20 N/A dB
Bufferzone

UL Refarming Zero
Interval Type -120~-25 N/A dBm
Bufferzone

UL Refarming Zero
Interval Type 0~600 N/A s
Bufferzone
None Interval Type 0~255 N/A None

None Interval Type 50~600 N/A s

None Interval Type -115~-80 N/A dBm

None Interval Type 5~35 N/A dB

None Interval Type 0~255 N/A None

None Interval Type 0~1048576 N/A kbps

None Interval Type 0~1048576 N/A kbps

None Interval Type 0~1048576 N/A kbps

None Interval Type 0~1048576 N/A kbps

None Interval Type 0~1048576 N/A kbps

None Interval Type 0~10000 N/A ms

None Interval Type 0~10000 N/A ms

None Interval Type 0~10000 N/A ms
None Interval Type 0~10000 N/A ms

None Interval Type 0~255 N/A None

None Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None

None Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None

None Interval Type 100~3000 N/A ms

None Interval Type 0~255 N/A None

 RachAdjSwitch(Rac
hAdjSwitch),
HoRaSwitch(HoRa
Switch),
UnsyncRaSwitch(U
nsyncRaSwitch),
RachAdjSwitch~0,
MaksIdxSwitch(Mak
HoRaSwitch~1,
sIdxSwitch),
UnsyncRaSwitch~2
BackOffSwitch(Bac
, MaksIdxSwitch~3,
kOffSwitch),
BackOffSwitch~4,
UeRaInforInqSwitch
UeRaInforInqSwitch
(UeRaInforInqSwitc
~5,
h),
RACH Optimization Bit Field Type PRACHFalseAlarm None
PRACHFalseAlarm
DetSwitch~6,
DetSwitch(PRACHF
RachPwrAdjSwitch
alseAlarmDetSwitch
~7,
),
ForbidAcByRadiusS
RachPwrAdjSwitch(
witch~8,
RachPwrAdjSwitch)
PrachFreqAdjSwitc
,
h~9
ForbidAcByRadiusS
witch(ForbidAcByR
adiusSwitch),
PrachFreqAdjSwitc
h(PrachFreqAdjSwit
ch)
 SrsSubframeRecfS
Physical Channel SrsSubframeRecfS
Bit Field Type witch(SrsSubframe None
Management witch~0
RecfSwitch)
 PucchSwitch(Pucch
Switch),
PucchSwitch~0,
PucchFlexCfgSwitc
PucchFlexCfgSwitc
Physical Channel h(PucchFlexCfgSwi
Bit Field Type h~1, None
Management tch),
Dl2CCAckResShar
Dl2CCAckResShar
eSw~2
eSw(Dl2CCAckRes
ShareSw)

Active Queue
Management Bit Field Type AqmAlgoSwitch AqmAlgoSwitch~0 None
(AQM)
 DlVarIBLERtargetS
witch(DlVarIBLERta
rgetSwitch),
TddBundlingCqiAdj
OptSwitch(TddBun
CqiAdjAlgoSwitch~
dlingCqiAdjOptSwit
0,
ch),
StepVarySwitch~1,
TddMultiplexingCqi
DlVarIBLERtargetS
AdjOptSwitch(TddM
witch~2,
ultiplexingCqiAdjOp
TddBundlingCqiAdj
tSwitch),
OptSwitch~3,
AdaptiveStepVaryS
TddMultiplexingCqi
witch(AdaptiveStep
AdjOptSwitch~4,
VarySwitch),
AdaptiveStepVaryS
DlCqiAdjDeltaOptS
witch~5,
witch(DlCqiAdjDelta
DlCqiAdjDeltaOptS
OptSwitch),
witch~6,
DlEnVarIblerTarget
CQI Adjustment DlEnVarIblerTarget
Switch(DlEnVarIbler
Dynamic Bit Field Type Switch~7, None
TargetSwitch),
Scheduling DlRetxTbsIndexAdj
DlRetxTbsIndexAdj
OptSwitch~8,
OptSwitch(DlRetxT
CfiConvertOptSwitc
bsIndexAdjOptSwit
h~9,
ch),
BundlingOptThdSwi
CfiConvertOptSwitc
tch~10,
h(CfiConvertOptSwi
DlSpsMcsIncrease
tch),
Switch~11,
BundlingOptThdSwi
CqiAdjTimeEffSwitc
tch(BundlingOptThd
h~12,
Switch),
RptCqiFltInitSwitch
DlSpsMcsIncrease
~13,
Switch(DlSpsMcsIn
UeSigInitCqiModSw
creaseSwitch),
itch~14
CqiAdjTimeEffSwitc
h(CqiAdjTimeEffSwi
tch),
RptCqiFltInitSwitch(
RptCqiFltInitSwitch)

Adaptive Power DynAdjVoltSwitch(D DynAdjVoltSwitch~

Bit Field Type None
Consumption ynAdjVoltSwitch) 0
 DlSwitch(dlCacSwit
ch),
UlSwitch(ulCacSwit
ch),
DlLdcSwitch(dlLdcS DlSwitch~0,
witch), UlSwitch~1,
Admission Control
UlLdcSwitch(ulLdcS DlLdcSwitch~5,
Congestion Control
witch), UlLdcSwitch~6,
Radio/transport
PreemptionSwitch( PreemptionSwitch~
resource pre- Bit Field Type None
PreemptionSwitch), 8, PttAcSwitch~9,
emption
PttAcSwitch(PttAcS VoltePrefAdmission
Enhanced extended
witch), Switch~10,
QCI
VoltePrefAdmission VoltePreemptionSwi
Switch(VoltePrefAd tch~11
missionSwitch),
VoltePreemptionSwi
tch(VoltePreemptio
nSwitch)
 InterFreqMlbSwitch(
InterFreqMlbSwitch)
,
UtranMlbSwitch(Utr
InterFreqMlbSwitch
anMlbSwitch),
~1,
Intra-LTE Load GeranMlbSwitch(G
UtranMlbSwitch~2,
Balancing eranMlbSwitch),
GeranMlbSwitch~3,
Inter-RAT Load UtranIdleMlbSwitch(
UtranIdleMlbSwitch
Sharing to UTRAN UtranIdleMlbSwitch)
~6,
Inter-RAT Load Bit Field Type , None
MlbLoadInfoSwitch
Sharing to GERAN MlbLoadInfoSwitch(
~7,
Load Balancing MlbLoadInfoSwitch)
InterFreqBlindMlbS
based on Transport ,
witch~8,
QoS InterFreqBlindMlbS
InterFreqIdleMlbSwi
witch(InterFreqBlind
tch~10
MlbSwitch),
InterFreqIdleMlbSwi
tch(InterFreqIdleMlb
Switch)
 PdschSpsPcSwitch
PdschSpsPcSwitch,
~0,
Physical Channel PhichInnerLoopPcS
PhichInnerLoopPcS
Management witch,
witch~1,
Broadcast of PdcchPcSwitch,
PdcchPcSwitch~2,
system information EDlMaxTXPwrSwitc
EDlMaxTXPwrSwitc
Dynamic Downlink h,
Bit Field Type h~3, None
Power Allocation BFModeUserPwrS
BFModeUserPwrS
Single Streaming witch,
witch~4,
Beamforming SigPowerIncreaseS
SigPowerIncreaseS
Dual Streaming witch,
witch~5,
Beamforming BFModeUserAdptP
BFModeUserAdptP
wrSwitch
wrSwitch~6
 CloseLoopSpsSwitc
h(CloseLoopSpsSw
itch),
InnerLoopPuschSwi
tch(InnerLoopPusc
hSwitch),
InnerLoopPucchSwi
tch(InnerLoopPucc
CloseLoopSpsSwitc
hSwitch),
h~0,
CloseLoopOptPUS
InnerLoopPuschSwi
CHSwitch(CloseLoo
tch~1,
pOptPUSCHSwitch)
InnerLoopPucchSwi
,
tch~3,
PucchPcDtxSinrSwi
CloseLoopOptPUS
tch(PucchPcDtxSinr
CHSwitch~6,
Switch),
Broadcast of PucchPcDtxSinrSwi
PuschIoTCtrlSwitch
system information tch~7,
(PuschIoTCtrlSwitc
Uplink Power PuschIoTCtrlSwitch
Bit Field Type h), None
Control ~8, SrsPcSwitch~9,
SrsPcSwitch(SrsPc
PUCCH Outer Loop NearPointUeOptPU
Switch),
Power Control SCHSwitch~10,
NearPointUeOptPU
PuschRsrpHighThd
SCHSwitch(NearPo
Switch~11,
intUeOptPUSCHSw
OuterLoopPucchSw
itch),
itch~12,
PuschRsrpHighThd
PucchInitialPcSwitc
Switch(PuschRsrpH
h~13,
ighThdSwitch),
GroupPCForPucch
OuterLoopPucchSw
Switch~14
itch(OuterLoopPucc
hSwitch),
PucchInitialPcSwitc
h(PucchInitialPcSwi
tch),
GroupPCForPucch
Switch(GroupPCFor
PucchSwitch)

Single Streaming
Beamforming
Bit Field Type BfSwitch BfSwitch~0 None
Dual Streaming
Beamforming
 MbrCtrlSwitch), MBSFNShutDownS
MbrDlSchSwitch(M witch~3,
brDlSchSwitch), NonGbrBundlingSw
UeAmbrDlSchSwitc itch~4,
h(UeAmbrDlSchSwi EnAperiodicCqiRpt
tch), Switch~5,
EpfEnhancedSwitc DlMbrCtrlSwitch~6,
h(EpfEnhancedSwit MbrDlSchSwitch~7,
Traffic Model Based ch), UeAmbrDlSchSwitc
Performance AperiodicCqiTrigOp h~8,
Optimization tSwitch(AperiodicC EpfEnhancedSwitc
VoIP Semi- qiTrigOptSwitch), h~9,
persistent VoipTbsBasedMcsS AperiodicCqiTrigOp
Scheduling elSwitch(VoipTbsBa tSwitch~10,
Dynamic sedMcsSelSwitch), VoipTbsBasedMcsS
Scheduling PagingInterfRandS elSwitch~11,
DL Non-GBR witch(PagingInterfR PagingInterfRandS
Packet Bundling andSwitch), witch~12,
Symbol Power DlSingleUsrMcsOpt DlSingleUsrMcsOpt
Bit Field Type None
Saving Switch(DlSingleUsr Switch~13,
Scheduling Based McsOptSwitch), SubframeSchDiffSw
on Max Bit Rate SubframeSchDiffSw itch~14,
Basic Scheduling itch(SubframeSchDi TailPackagePriSch
Support of ffSwitch), Switch~15,
aperiodic CQI TailPackagePriSch UeSigMcsEnhance
reports Switch(TailPackage Switch~16,
MBR>GBR PriSchSwitch), FreqSelJudgeIgnor
Configuration UeSigMcsEnhance DopplerSwitch~17,
Enhanced Switch(UeSigMcsE SIB1InterfRandSwit
Extended QCI nhanceSwitch), ch~18,
FreqSelJudgeIgnor EnhExtQCISpsSch
DopplerSwitch(Freq Switch~19,
SelJudgeIgnorDopp DlVoipBundlingSwit
lerSwitch), ch~20,
SIB1InterfRandSwit DlPacketLenAware
ch(SIB1InterfRandS SchSw~21,
witch), RLCArqFeedbackE
EnhExtQCISpsSch nhancedSwitch~22,
 Switch), UlIblerAdjustSwitch
UlEnhancedSrSchS ~8,
witch(UlEnhancedS UlEnhancedFssSwit
rSchSwitch), ch~9,
SchedulerCtrlPower UlEnhancedSrSchS
Switch(SchedulerCt witch~10,
rlPowerSwitch), SchedulerCtrlPower
UlIicsAlgoSwitch(UlI Switch~11,
icsAlgoSwitch), UlIicsAlgoSwitch~1
UlMinGbrSwitch(Ul 2,
MinGbrSwitch), UlMinGbrSwitch~13
VoIP Semi-
UlMbrCtrlSwitch(Ul ,
persistent
MbrCtrlSwitch), UlMbrCtrlSwitch~14
Scheduling
MbrUlSchSwitch(M ,
TTI Bundling
brUlSchSwitch), MbrUlSchSwitch~1
Dynamic
UeAmbrUlSchSwitc 5,
Scheduling
h(UeAmbrUlSchSwi UeAmbrUlSchSwitc
Basic
tch), h~16,
SchedulingTDLOFD
Bit Field Type UlEnhancedDopple UlEnhancedDopple None
-070224:Scheduling
rSwitch(UlEnhance rSwitch~17,
Based on Max Bit
dDopplerSwitch), UlRaUserSchOptS
Rate
UlRaUserSchOptS w~18,
MBR>GBR
w(UlRaUserSchOpt UlLast2RetransSch
Configuration
Sw), OptSwitch~19,
UL 2x2 MU-MIMO
UlLast2RetransSch UlInterfFssSwitch~2
UL 2x4 MU-MIMO
OptSwitch(UlLast2 0,
AMC
RetransSchOptSwit UlSmallRBSpectral
ch), EffOptSw~21,
UlInterfFssSwitch(U PuschUsePucchRb
lInterfFssSwitch), Switch~22,
UlSmallRBSpectral PuschDtxSchOptS
EffOptSw(UlSmallR witch~23,
BSpectralEfficiency ULFSSAlgoSwitch~
OptSw), 24,
PuschUsePucchRb PrachRbReuseSwit
Switch(PuschUseP ch~25,
ucchRbSwitch), SrSchDataAdptSw~

RAN Sharing with

Common Carrier
MOCN Flexible
Priority Based Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Camping
Hybrid RAN
Sharing
 FreqPriorIFHOSwitc
h(FreqPriorIFHOSw
itch), FreqPriorIFHOSwitc
FreqPriorIFBlindHO h~0,
Switch(FreqPriorIF FreqPriorIFBlindHO
BlindHOSwitch), Switch~1,
None Bit Field Type None
MlbBasedFreqPriH MlbBasedFreqPriH
oSwitch(MlbBasedF oSwitch~2,
reqPriHoSwitch), A2BasedFreqPriHo
A2BasedFreqPriHo Switch~3
Switch(A2BasedFre
qPriHoSwitch)
 MuBfSwitch(MuBfS
witch),
MuBfSwitch~0,
MU-Beamforming TM9MuBfSwitch(T
TM9MuBfSwitch~1,
3GPP R8 M9MuBfSwitch),
HighOrderMubfSwit
Specifications Bit Field Type HighOrderMubfSwit None
ch~3,
MU-Beamforming ch(HighOrderMubfS
MubfResAdjSwitch
(DL 4-Layer) witch),
~4
MubfResAdjSwitch(
MubfResAdjSwitch)

Distance Based
Inter-frequency
Handover
Distance based
Inter-RAT handover Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
to UTRAN
Distance based
Inter-RAT handover
to GERAN
 ACBAR_SWITCH_
DYNAMIC(dynamic ACBAR_SWITCH_
Broadcast of configuration), DYNAMIC~0,
system information ACBAR_SWITCH_ ACBAR_SWITCH_
Enumeration Type None
Dynamic AC STATIC(static STATIC~1,
Barring configuration), ACBAR_SWITCH_
ACBAR_SWITCH_ DISABLE~2
DISABLE(Disable)

ADAPTIVE(Adaptiv
e scheduling), ADAPTIVE~0,
None Enumeration Type None
JOINT(Joint JOINT~1
scheduling)
 ADAPTIVE(Adaptiv
e scheduling), ADAPTIVE~0,
None Enumeration Type None
JOINT(Joint JOINT~1
scheduling)

Control Channel PucchIrcSwitch, PucchIrcSwitch~0,

Bit Field Type None
IRC PrachIrcSwitch PrachIrcSwitch~1
DRX, LOFD-
DynDrxSwitch(Dyn
00110501/TDLOFD
DrxSwitch), DynDrxSwitch~0,
-00110501:Dynamic Bit Field Type None
SmartDrxSwitch(S SmartDrxSwitch~1
DRX, TDLBFD-
martDrxSwitch)
070112:Smart DRX

High-Mobility-
Triggered Idle Mode DISABLE(Disable), DISABLE~0,
Enumeration Type None
High-Mobility- ENABLE(Enable) ENABLE~1
Triggered Idle Mode
 AvoidGeranInterfSw
itch(AvoidGeranInte
rfSwitch),
TddAvoidUpPTSInt AvoidGeranInterfSw
erfSwitch(TddAvoid itch~0,
UpPTSInterfSwitch) TddAvoidUpPTSInt
GSM and LTE
, erfSwitch~1,
Buffer Zone
AvoidPrachInterfSw AvoidPrachInterfSw
Optimization(LTE) Bit Field Type None
itch(AvoidPrachInte itch~2,
UL Refarming Zero
rfSwitch), AvoidUtranInterfSwi
Bufferzone
AvoidUtranInterfSwi tch~3,
tch(AvoidUtranInterf IntraBandInterfMoni
Switch), torSwitch~4
IntraBandInterfMoni
torSwitch(IntraBand
InterfMonitorSwitch)
GSM and LTE
Dynamic Power Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Sharing(LTE)
 OFF(Off),
Static TDM
STATIC(Static), OFF~0, STATIC~1,
eICIC/Dynamic Enumeration Type None
DYNAMIC(Dynamic DYNAMIC~2
TDM eICIC
)

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

 IntraDlCompSwitch(
IntraDlCompSwitch)
IntraDlCompSwitch
,
~0,
Inter-eNodeB DL InterDlCompDcsSwi
InterDlCompDcsSwi
CoMP based on Bit Field Type tch(InterDlCompDc None
tch~1,
Relaxed backhaul sSwitch),
InterDlCompCbfSwi
InterDlCompCbfSwi
tch~2
tch(InterDlCompCbf
Switch)
 MumimoPuschPsic
MumimoPuschPsic
Advanced Receiver Bit Field Type Switch(MumimoPus None
Switch~0
chPsicSwitch)
 InterFreqMlbBlindH
o(InterFreqMlbBlind
Ho), InterFreqMlbBlindH
Intra-LTE Load InterRatMlbBlindHo o~0,
Balancing (InterRatMlbBlindH InterRatMlbBlindHo
Inter-RAT Load o), ~1,
Bit Field Type None
Sharing to UTRAN InterFreqMlbRedire InterFreqMlbRedire
Inter-RAT Load ct(InterFreqMlbRedi ct~2,
Sharing to GERAN rect), InterRatMlbRedirect
InterRatMlbRedirect ~3
(InterRatMlbRedirec
t)
 UlJointReceptionSw
itch(UlJointReceptio
nSwitch),
UlJointReceptionPh
aseIISwitch(UlJoint
ReceptionPhaseIIS
witch),
UlJointReceptionSw
UlCompRollbackSw
itch~0,
itch(UlCompRollbac
UlJointReceptionPh
kSwitch),
aseIISwitch~1,
UlJointReception3C
UlCompRollbackSw
ellSwitch(UlJointRe
Intra-eNodeB UL itch~2,
ception3CellSwitch)
CoMP UlJointReception3C
,
Intra-eNodeB UL ellSwitch~3,
UlHetnetJointRecep
CoMP Phase II Bit Field Type UlHetnetJointRecep None
tionSwitch(UlHetnet
UL CoMP based on tionSwitch~4,
JointReceptionSwit
Coordinated BBU UlHetnetCompMan
ch),
Hetnet UL CoMP ualNcellCfgSw~5,
UlHetnetCompMan
UlHetnetCompOnUl
ualNcellCfgSw(UlH
RsrpSw~6,
etnetCompManualN
SimplePairedComp
cellCfgSw),
Sw~7,
UlHetnetCompOnUl
VoipPrioSw~8
RsrpSw(UlHetnetC
ompOnUlRsrpSw),
SimplePairedComp
Sw(SimplePairedCo
mpSw),
VoipPrioSw(VoipPri
oSw)
Single Streaming
Beamforming
TDLOFD-
001061:Dual CrossPolaCalibratio
CrossPolaCalibratio
Streaming Bit Field Type nSwitch(CrossPola None
nSwitch~0
Beamforming CalibrationSwitch)
TDLOFD-
001060:DL 4x4
MIMO

GLDynSpectrumSh
GSM and LTE FDD
areSwitch(GLDynS GLDynSpectrumSh
Dynamic Spectrum Bit Field Type None
pectrumShareSwitc areSwitch~0
Sharing(LTE FDD)
h)
Adaptive
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
SFN/SDMA
 MrcIrcAdptSwitch(M
rcIrcAdptSwitch),
MrcIrcAdptSwitch~0
UL Interference SmartIrcSwitch(Sm
, SmartIrcSwitch~1,
Rejection Bit Field Type artIrcSwitch), None
MrcIrcAdaptivefor2
Combining MrcIrcAdaptivefor2
R~2
R(MrcIrcAdaptivefor
2R)
Cell Selection and
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Re-selection
 INTRA_RAT_ANR_
Automatic SW(INTRA_RAT_A INTRA_RAT_ANR_
Neighbour Relation NR_SW), SW~0,
Bit Field Type None
(ANR) INTER_RAT_ANR_ INTER_RAT_ANR_
Inter-RAT ANR SW(INTER_RAT_A SW~1
NR_SW)
 SfnPdcchDcsSwitch
(SFNPDCCHDCSS
WITCH),
SfnUll2SelectiveRc
vSwitch(SfnUll2Sel
ectiveRcvSwitch),
SfnPdcchDcsSwitch
SfnPdcchSdmaSwit
~0,
ch(SFNPDCCHSD
SfnUll2SelectiveRc
MASWITCH),
vSwitch~1,
SfnPucchAckSdma
SfnPdcchSdmaSwit
Switch(SFNPUCCH
ch~2,
ACKSDMASWITCH
SfnPucchAckSdma
),
Switch~3,
Adaptive SuperCombCellSwit
SuperCombCellSwit
SFN/SDMA ch(SuperCombCell
Bit Field Type ch~4, None
Super Combined Switch),
SfnDl2LoadLevelAd
Cell SfnDl2LoadLevelAd
ptSwitch~5,
ptSwitch(SfnDl2Loa
SfnDlSchAttriAdjsS
dLevelAdptSwitch),
witch~6,
SfnDlSchAttriAdjsS
SfnCbfSwitch~7,
witch(SfnDlSchAttri
SfnVoLteDlJSchSwi
AdjsSwitch),
tch~8,
SfnCbfSwitch(SfnC
SfnTarRruSelEnhS
bfSwitch),
witch~9
SfnVoLteDlJSchSwi
tch(SfnVoLteDlJSch
Switch),
SfnTarRruSelEnhS
witch(SfnTarRruSel
EnhSwitch)
Control Channel
IRC/Control Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Channel IRC

DL 2*2 MIMO
based on TM9
DL 4*2 MIMO
based on TM9
DL 8x2 MIMO TM9Switch(TM9Swi
Bit Field Type TM9Switch~0 None
based on TM9 tch)
DL 4x4 MIMO
based on TM9
DL 8x4 MIMO
based on TM9
Multi-Cell
Interference
Randomizing OFF(OFF),
Multi-Cell ECO_BASED(ECO OFF~0,
Interference Enumeration Type _BASED), ECO_BASED~1, None
Randomizing and ENB_BASED(ENB_ ENB_BASED~2
Coordination BASED)
Dynamic
Scheduling

Dynamic Downlink AntRsPwrSwitch(An

Bit Field Type AntRsPwrSwitch~0 None
Power Allocation tRsPwrSwitch)
Coverage Based FixedMeasObjIDSw
Inter-frequency itch(FixedMeasObjI
FixedMeasObjIDSw
Handover DSwitch),
itch~0,
Distance Based VoipMeasFreqPriS
VoipMeasFreqPriS
Inter-frequency Bit Field Type witch(VoipMeasFre None
witch~1,
Handover qPriSwitch),
PsMeasFreqPriSwit
Service Based PsMeasFreqPriSwit
ch~2
Inter-frequency ch(PsMeasFreqPriS
Handover witch)
 TddAckFbModeCfg
DL Asynchronous OptSwitch(TddAckF TddAckFbModeCfg
Bit Field Type None
HARQ bModeCfgOptSwitc OptSwitch~0
h)
 HANDOVERIMME
DIATELY(HANDOV
ERIMMEDIATELY), HANDOVERIMME
BASEDONSIGNAL DIATELY~0,
Coverage Based
STRENGTH(BASE BASEDONSIGNAL
Inter-frequency Enumeration Type None
DONSIGNALSTRE STRENGTH~1,
Handover
NGTH), BASEDONFREQP
BASEDONFREQP RIORITY~2
RIORITY(BASEDO
NFREQPRIORITY)

eMBMS Service
Continuity
Broadcast of
system information
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
eMBMS Phase 1
based on
Centralized MCE
Architecture
Enhanced
AbnUeSchSwitch(A
Scheduling Bit Field Type AbnUeSchSwitch~0 None
bnUeSchSwitch)
Basic Scheduling

Ssrd8T8RAlgoSwitc
Soft Split Resource Ssrd8T8RAlgoSwitc
Bit Field Type h(Ssrd8T8RAlgoSw None
Duplex h~0
itch)
 IntraBaseBandSwit
ch(IntraBaseBandS
witch), IntraBaseBandSwit
InterBaseBandSwit ch~0,
ch(InterBaseBandS InterBaseBandSwit
SFN
witch), ch~1,
Adaptive Bit Field Type None
ComCoverUlComp ComCoverUlComp
SFN/SDMA
Switch(ComCoverU Switch~2,
lCompSwitch), SfnUplinkComp3Ce
SfnUplinkComp3Ce llSwitch~3
llSwitch(SfnUplinkC
omp3CellSwitch)

Handover
Enhancement at
Speed Mobility
Handover Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Enhancement at
Ultra High Speed
Mobility
 OutOfBandRelayS
Out of Band Relay OutOfBandRelayS
Bit Field Type witch(OutOfBandRe None
introduction witch~0
laySwitch)

Handover
Enhancement at
Speed Mobility
Handover Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Enhancement at
Ultra High Speed
Mobility
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

CqiReliableSwitch( CqiReliableSwitch~
None Bit Field Type None
CqiReliableSwitch) 0
Control Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
IRC
 DYNAMIC_FOR_M
Dynamic Service
O(DYNAMIC_FOR_ DYNAMIC_FOR_M
Specific Access
MO), O~0,
Control Bit Field Type None
DYNAMIC_FOR_S DYNAMIC_FOR_S
Intelligent Access
SAC(DYNAMIC_FO SAC~1
Class Control
R_SSAC)
Static TDM
eICIC/Dynamic Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
TDM eICIC
 InterFreqBackoffSw
Intra-LTE Backoff InterFreqBackoffSw
Bit Field Type itch(InterFreqBacko None
Load Balancing itch~0
ffSwitch)
Service Based SrvBasedInterFreq
SrvBasedInterFreq
Inter-frequency Bit Field Type HoSw(SrvBasedInt None
HoSw~0
Handover erFreqHoSw)
 INTRA_RAT_NCEL
L_CLASS_SW(INT
RA_RAT_NCELL_C
LASS_SW), INTRA_RAT_NCEL
NCELL_CLASS_H L_CLASS_SW~0,
Neighbor cell O_POLICY_SW(NC NCELL_CLASS_H
Classification Bit Field Type ELL_CLASS_HO_P O_POLICY_SW~1, None
Management OLICY_SW), NCELL_CLASS_P
NCELL_CLASS_P CI_CONFLICT_SW
CI_CONFLICT_SW ~2
(NCELL_CLASS_P
CI_CONFLICT_SW
)
 IntraAnrPolicySwitc
h(INTRA_ANR_PO
Specified PCI IntraAnrPolicySwitc
LICY_SWITCH),
Group Based h~0,
Bit Field Type PciConflictDetectPo None
Neighboring Cell PciConflictDetectPo
licySwitch(PCI_CO
Management licySwitch~1
NFLICT_DETECT_
POLICY_SWITCH)
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

 OFF(Off),
FeICIC Enumeration Type OFF~0, ABS~1 None
ABS(ABS)
Intra-eNodeB
UlCamcSw(UlCamc
Coordinated Uplink
Sw), UlCamcSw~0,
AMC
Bit Field Type UlInterEnbCamcSw UlInterEnbCamcSw None
Inter-eNodeB
(UlInterEnbCamcS ~1
Coordinated Uplink
w)
AMC

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

 InterfHighSpeedSW
(InterfHighSpeedS
Coordinated
W), InterfHighSpeedSW
Scheduling and
HighSpeedUserRed ~0,
Interference
Bit Field Type irectSwitch(HighSp HighSpeedUserRed None
Resistance in High-
eedUserRedirectSw irectSwitch~1,
Speed Railway
itch), DlAfcSwitch~2
Scenarios
DlAfcSwitch(DlAfcS
witch)
 VideoRateAdaptSwi
Busy-Hour
tch(VideoRateAdapt VideoRateAdaptSwi
Download Rate
Switch), tch~0,
Control and Video Bit Field Type None
DownLoadRateLimi DownLoadRateLimi
Service Rate
tSwitch(DownLoad tSwitch~1
Adaption
RateLimitSwitch)

Enhanced extended
QCI
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Enhanced extended
QCInt
Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
Voice Characteristic
Awareness Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Scheduling
 Ul1R1RJRSwitch(Ul
Intra-eNodeB UL Ul1R1RJRSwitch~0
1R1RJRSwitch),
CoMP ,
Ul1R2RJRSwitch(Ul
Intra-eNodeB UL Ul1R2RJRSwitch~1
1R2RJRSwitch),
CoMP Phase II ,
Ul2R8RJRSwitch(Ul
UL CoMP based on Bit Field Type Ul2R8RJRSwitch~2 None
2R8RJRSwitch),
Coordinated BBU ,
Ul4R8RJRSwitch(Ul
SFN Ul4R8RJRSwitch~3
4R8RJRSwitch),
Adaptive ,
Ul8R8RJRSwitch(Ul
SFN/SDMA Ul8R8RJRSwitch~4
8R8RJRSwitch)

VamPhaseShiftAlgo
VamPhaseShiftAlgo
DL 2X2 MIMO Bit Field Type Switch(VamPhaseS None
Switch~0
hiftAlgoSwitch)
Automatic BACKWARD_ANR_
BACKWARD_ANR_
Neighbour Relation Bit Field Type SW(BACKWARD_A None
SW~0
(ANR) NR_SW)
Basic Scheduling
Dynamic Dl256QamSwitch(D
Bit Field Type Dl256QamSwitch~0 None
Scheduling l256QamSwitch)
DL 256QAM

Auto Neighbor OverlapIndAutoSwit

OverlapIndAutoSwit
Group Bit Field Type ch(OverlapIndAuto None
ch~0
Configuration Switch)
Auto Neighbor BlindScellAutoSwitc
BlindScellAutoSwitc
Group Bit Field Type h(BlindScellAutoSwi None
h~0
Configuration tch)

eICIC Auto Group

Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Configuration
 DlCellCoverEnhanc
Cell Coverage DlCellCoverEnhanc
Bit Field Type eAlgoSw(DlCellCov None
Enhancement eAlgoSw~0
erEnhanceAlgoSw)
 UlPacketLenAware
SchSw(UlPacketLe
nAwareSchSw),
Traffic Model Based EnhExtQCITtiBundli
UlPacketLenAware
Performance ngSwitch(EnhExtQ
SchSw~0,
Optimization CITtiBundlingSwitch
EnhExtQCITtiBundli
TTI Bundling ),
ngSwitch~1,
VoIP Semi- EnhExtQCISpsSch
EnhExtQCISpsSch
persistent Switch(EnhExtQCIS
Bit Field Type Switch~2, None
Scheduling psSchSwitch),
UlVoipRbRsvSwitch
Enhanced UlVoipRbRsvSwitch
~3,
Extended QCI (UlVoipRbRsvSwitc
UlThpEnhSwitch~4,
Dynamic h),
UlDataFitterRbCalc
Scheduling UlThpEnhSwitch(Ul
Switch~5
Basic Scheduling ThpEnhSwitch),
UlDataFitterRbCalc
Switch(UlDataFitter
RbCalcSwitch)
 BasicUdcSwitch(Ba
None Bit Field Type BasicUdcSwitch~0 None
sicUdcSwitch)
 AcBarForVoLTEPre
AcBarForVoLTEPre
AC Barring Skip Bit Field Type ferSwitch(AcBarFor None
ferSwitch~0
VoLTEPreferSwitch)
 VoipFailDecSelfRec
VoipFailDecSelfRec
None Bit Field Type Switch(VoipFailDec None
Switch~0
SelfRecSwitch)
 UNDELIVER( UND
ELIVER), UNDELIVER~0,
RRC Connection
Enumeration Type FREQUENCY(FRE FREQUENCY~1, None
Management
QUENCY), EUTRA~2
EUTRA(EUTRA)

CMAS Support Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

 COLLISION_REPO
RT_SWITCH(COLL
ISION_REPORT_S COLLISION_REPO
PCI Collision
WITCH), RT_SWITCH~0,
Detection & Self- Bit Field Type None
CONFUSION_REP CONFUSION_REP
Optimization
ORT_SWITCH(CO ORT_SWITCH~1
NFUSION_REPOR
T_SWITCH)
 IntraFreqMroSwitch
(IntraFreqMroAlgoS
witch),
InterFreqMroSwitch
(InterFreqMroAlgoS
witch), IntraFreqMroSwitch
UtranMroSwitch(Utr ~0,
anMroSwitch), InterFreqMroSwitch
GeranMroSwitch(G ~1,
eranMroSwitch), UtranMroSwitch~2,
UEMroSwitch(UeMr GeranMroSwitch~3,
oAlgoSwitch), UEMroSwitch~4,
IntraFreqReselOptS IntraFreqReselOptS
Mobility Robust
Bit Field Type witch(IntraFreqRes witch~5, None
Optimization (MRO)
elOptSwitch), UtranUnnecHoOptS
UtranUnnecHoOptS witch~6,
witch(UtranUnnecH GeranUnnecHoOpt
oOptSwitch), Switch~7,
GeranUnnecHoOpt IntraRatCallbackSw
Switch(GeranUnnec itch~8,
HoOptSwitch), UnnecHoOptWithou
IntraRatCallbackSw tRIM~9
itch(IntraRatCallbac
kSwitch),
UnnecHoOptWithou
tRIM(UnnecHoOpt
WithoutRIM)
 NoUserCellRecover
NoUserCellRecover
None Bit Field Type ySwitch(NoUserCell None
ySwitch~0
RecoverySwitch)

UlHeavyTrafficMlbS
Uplink Traffic-based UlHeavyTrafficMlbS
Bit Field Type witch(UlHeavyTraffi None
MLB to LTE FDD witch~0
cMlbSwitch)
 GSM_MEAS_DEL_
GSM_MEAS_DEL_
INTERFREQ_SW(
SRVCC to GERAN Bit Field Type INTERFREQ_SW~ None
Gsm Meas Del
0
Interfreq Switch)

None Interval Type 0~255 N/A None

 MODE1(DL band
division scheme
Downlink Static
No.1), MODE2(DL
Inter-Cell
band division
Interference MODE1~0,
scheme No.2),
Coordination MODE2~1,
Enumeration Type MODE3(DL band None
Downlink Dynamic MODE3~2,
division scheme
Inter-Cell INVALID~255
No.3),
Interference
INVALID(Invalid DL
Coordination
band division
scheme)
Adaptive Inter-Cell
Interference Interval Type -5~15 N/A dB
Coordination
Adaptive Inter-Cell
Interference Interval Type 0~97 N/A None
Coordination

None Interval Type 0~255 N/A None

Physical Channel
Management
Interval Type -150~150 N/A 0.1dB
Dynamic Downlink
Power Allocation

None Interval Type 0~255 N/A None

Dynamic Downlink PA_NEG6(-6dB),
Power Allocation PA_NEG4DOT77(-
Downlink Static 4.77dB), PA_NEG6~0,
Inter-Cell PA_NEG3(-3dB), PA_NEG4DOT77~1
Interference PA_NEG1DOT77(- , PA_NEG3~2,
Enumeration Type dB
Coordination 1.77dB), PA_NEG1DOT77~3
Downlink Dynamic PA_0(0dB), , PA_0~4, PA_1~5,
Inter-Cell PA_1(1dB), PA_2~6, PA_3~7
Interference PA_2(2dB),
Coordination PA_3(3dB)
Dynamic Downlink PA_NEG6(-6dB),
Power Allocation PA_NEG4DOT77(-
Downlink Static 4.77dB), PA_NEG6~0,
Inter-Cell PA_NEG3(-3dB), PA_NEG4DOT77~1
Interference PA_NEG1DOT77(- , PA_NEG3~2,
Enumeration Type dB
Coordination 1.77dB), PA_NEG1DOT77~3
Downlink Dynamic PA_0(0dB), , PA_0~4, PA_1~5,
Inter-Cell PA_1(1dB), PA_2~6, PA_3~7
Interference PA_2(2dB),
Coordination PA_3(3dB)

Single Streaming
Beamforming
Dual Streaming
Interval Type 900~3600 N/A s
Beamforming
Dynamic Downlink
Power Allocation
Single Streaming
Beamforming
Dual Streaming
Interval Type 1~100 N/A %
Beamforming
Dynamic Downlink
Power Allocation
Single Streaming
Beamforming
Dual Streaming
Interval Type 1~100 N/A %
Beamforming
Dynamic Downlink
Power Allocation
Single Streaming
Beamforming
Dual Streaming
Interval Type 5~1800 N/A 1s
Beamforming
Dynamic Downlink
Power Allocation
Single Streaming
Beamforming
Dual Streaming
Interval Type -30~30 N/A 0.5dB
Beamforming
Dynamic Downlink
Power Allocation

Single Streaming
Beamforming
Dual Streaming
Interval Type -30~30 N/A 0.5dB
Beamforming
Dynamic Downlink
Power Allocation
None Interval Type 0~255 N/A None

Dynamic Downlink
Interval Type -150~150 N/A 0.1dB
Power Allocation

None Interval Type 0~255 N/A None

 DLSCH_PRI_TYPE DLSCH_PRI_TYPE
_EPF(EPF), _EPF~0,
Basic Scheduling
DLSCH_PRI_TYPE DLSCH_PRI_TYPE
Enhanced
_PF(PF), _PF~1,
Scheduling Enumeration Type None
DLSCH_PRI_TYPE DLSCH_PRI_TYPE
Dynamic
_MAX_CI(MAX C/I), _MAX_CI~2,
Scheduling
DLSCH_PRI_TYPE DLSCH_PRI_TYPE
_RR(RR) _RR~3
None Interval Type 0~100 N/A %

SW_MAX_SM_RA SW_MAX_SM_RA
NK_1(Rank1), NK_1~0,
DL 2x2 MIMO
SW_MAX_SM_RA SW_MAX_SM_RA
DL 4x2 MIMO Enumeration Type None
NK_2(Rank2), NK_2~1,
DL 4X4 MIMO
SW_MAX_SM_RA SW_MAX_SM_RA
NK_4(Rank4) NK_4~2
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE BASIC_SCHEDUL
BASIC_SCHEDUL
Category 6 E(Basic Schedule),
E~0,
Flexible CA from Enumeration Type DIFF_SCHEDULE( None
DIFF_SCHEDULE~
Multiple Carriers differentiation
1
Inter-eNodeB CA schedule)
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Enhanced
Scheduling
CQI Adjustment
Dynamic
Scheduling

Dynamic
Interval Type 0~50 N/A %
Scheduling
 EPF_CAPC_FACT EPF_CAPC_FACT
OR_1(1), OR_1~0,
EPF_CAPC_FACT EPF_CAPC_FACT
OR_0DOT01(0.01), OR_0DOT01~1,
EPF_CAPC_FACT EPF_CAPC_FACT
Dynamic OR_0DOT5(0.5), OR_0DOT5~2,
Enumeration Type None
Scheduling EPF_CAPC_FACT EPF_CAPC_FACT
OR_2(2), OR_2~3,
EPF_CAPC_FACT EPF_CAPC_FACT
OR_3(3), OR_3~4,
EPF_CAPC_FACT EPF_CAPC_FACT
OR_4(4) OR_4~5
Dynamic
Interval Type 0~100 N/A %
Scheduling
 ALL_EDGE_USER( ALL_EDGE_USER
Basic Scheduling
All Edge User), ~0,
Dynamic Enumeration Type None
PART_EDGE_USE PART_EDGE_USE
Scheduling
R(Part Edge User) R~1

EDGE_USER_NO_
EDGE_USER_NO_
Basic Scheduling PRIO(Edge User
PRIO~0,
Dynamic Enumeration Type No Prio), None
EDGE_USER_PRI
Scheduling EDGE_USER_PRI
O~1
O(Edge User Prio)
 ROUND_DOWN(R
ound Down),
Basic Scheduling ROUND_DOWN~0,
ROUND_UP(Round
Dynamic Enumeration Type ROUND_UP~1, None
Up),
Scheduling ADAPTIVE~2
ADAPTIVE(Adaptiv
e)

Basic Scheduling Interval Type 1~6 N/A None

Coordinated
Scheduling based
Interval Type 0~10 N/A None
Power
Control(Cloud BB)
Basic Scheduling
Dynamic Interval Type 0~100 N/A ms
Scheduling
Basic Scheduling
Dynamic
Scheduling Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
DL 4X4 MIMO
DL 2X2 MIMO
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in FROMSCC(FROM
40MHz SCC), FROMSCC~0,
Enumeration Type None
Support of UE FROMPCC(FROM FROMPCC~1
Category 6 PCC)
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 ms20(20ms),
VoIP Semi-
ms40(40ms), ms20~0, ms40~1,
persistent Enumeration Type None
ADAPTIVE(ADAPTI ADAPTIVE~2
Scheduling
VE)
 SINGLEUSER_ST
RATEGY(Single
User Strategy), SINGLEUSER_ST
MULTIUSER_STRA RATEGY~0,
CQI Adjustment TEGY(Multiple User MULTIUSER_STRA
Dynamic Enumeration Type Strategy), TEGY~1, None
Scheduling MULTIUSR_LOWM MULTIUSR_LOWM
CSLIMIT_STRATE CSLIMIT_STRATE
GY(Multiple User GY~2
Lower MCS Limited
Strategy)
 DetectRank2AdjSwi
tch(DetectRank2Adj
DetectRank2AdjSwi
Switch),
DL 2X2 MIMO tch~0,
DetectRank1AdjSwi
DL 4x4 MIMO DetectRank1AdjSwi
Bit Field Type tch(DetectRank1Adj None
Dual streaming tch~1,
Switch),
Beamforming BfDetectRank1AdjS
BfDetectRank1AdjS
witch~2
witch(BfDetectRank
1AdjSwitch)
 SubFrame0(SubFra
me0),
SubFrame1(SubFra
me1),
SubFrame2(SubFra
me2), SubFrame0~0,
SubFrame3(SubFra SubFrame1~1,
me3), SubFrame2~2,
DL 2*2 MIMO SubFrame4(SubFra SubFrame3~3,
based on TM9 me4), SubFrame4~4,
Bit Field Type None
DL 4*2 MIMO SubFrame5(SubFra SubFrame5~5,
based on TM9 me5), SubFrame6~6,
SubFrame6(SubFra SubFrame7~7,
me6), SubFrame8~8,
SubFrame7(SubFra SubFrame9~9
me7),
SubFrame8(SubFra
me8),
SubFrame9(SubFra
me9)

Basic Scheduling SCH(Schedule),

Dynamic Enumeration Type NSCH(Not SCH~0, NSCH~1 None
Scheduling Schedule)
Dynamic
Interval Type 0~1000000 N/A bit
Scheduling
Dynamic
Interval Type 0~10000 N/A None
Scheduling
Multi-Cell
Interference
Randomizing
Multi-Cell
MOD3(3), MOD3~0, MOD4~1,
Interference Enumeration Type None
MOD4(4), MOD6(6) MOD6~2
Randomizing and
Coordination
Dynamic
Scheduling
Basic
Scheduling/Dynami Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
c Scheduling
Enhanced
Scheduling Interval Type 6~120 N/A None
Basic Scheduling
Paging Random
Interval Type 10~930 N/A None
Access Procedure

CQI Adjustment Interval Type 0~1000 N/A None

DL 2-Layer MIMO
Based on TM9 UnCfgCsiRsUESch UnCfgCsiRsUESch
Bit Field Type None
DL 4-Layer MIMO Switch Switch~0
Based on TM9
Adaptive
Interval Type 2~1800 N/A s
SFN/SDMA
Enhanced DL
Frequency
Selective, Dynamic
Interval Type 1~10 N/A s
Scheduling,
Dynamic
Scheduling
 DlVoIPLoadBasedS
Dynamic chSwitch(DlVoIPLo DlVoIPLoadBasedS
Bit Field Type None
Scheduling adBasedSchSwitch chSwitch~0
)
Enhanced DL
5ms~0, 10ms~1,
Frequency 5ms, 10ms, 20ms,
20ms~2, 40ms~3,
Selective Enumeration Type 40ms, 80ms, None
80ms~4, 160ms~5,
Dynamic 160ms, inf
inf~6
Scheduling

Adaptive
Interval Type 0~100 N/A %
SFN/SDMA

Adaptive
Interval Type 0~100 N/A %
SFN/SDMA
Adaptive
Interval Type -25~25 N/A dB
SFN/SDMA

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

None Interval Type -1200~400 N/A 0.1dBm/MHz

None Interval Type -1200~400 N/A 0.1dBm/MHz

None String Type 0~32 characters N/A None

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

None Interval Type -1200~400 N/A 0.1dBm/MHz

CQI_PERIOD_BAS
Dynamic ED(CQI_PERIOD_
CQI_PERIOD_BAS
Scheduling BASED),
ED~0,
Support of Enumeration Type CQI_REPORTINTE None
CQI_REPORTINTE
aperiodic CQI RVAL_BASED(CQI
RVAL_BASED~1
reports _REPORTINTERVA
L_BASED)
 EQUALLY_DIVIDE
Dynamic D(EQUALLY_DIVID EQUALLY_DIVIDE
Scheduling ED), D~0,
Enumeration Type None
PDSCH Efficiency ADAPTIVELY_DIVI ADAPTIVELY_DIVI
Improvement DED(ADAPTIVELY DED~1
_DIVIDED)
Dynamic
DlCaUserRbPriMcs
Scheduling
SelSwitch(DlCaUse DlCaUserRbPriMcs
PDSCH Efficiency Bit Field Type None
rRbPriMcsSelSwitc SelSwitch~0
Improvement
h)
CQI Adjustment

Basic Scheduling
Dynamic
Interval Type 1~1000 N/A s
Scheduling
DL 256QAM
 FIX_CONFIG(FIX_
Basic Scheduling
CONFIG), FIX_CONFIG~0,
Dynamic
Enumeration Type ADAPTIVE_CONFI ADAPTIVE_CONFI None
Scheduling
G(ADAPTIVE_CON G~1
DL 256QAM
FIG)

Cell Coverage
Interval Type 0~9 N/A None
Enhancement
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

VoIP Semi-
persistent Interval Type 1~99 N/A None
Scheduling
High Speed Mobility Interval Type 0~1000 N/A None
High Speed Mobility Interval Type 0~1024 N/A None
 CELL_INST_UNIN
STALL(CELL_INST
_UNINSTALL), CELL_INST_UNIN
SWITCH_OFF(SWI STALL~0,
TCH_OFF), SWITCH_OFF~1,
NOT_ALLOWED_P NOT_ALLOWED_P
None Enumeration Type OWER(NOT_ALLO OWER~2, None
WED_POWER), NOT_ALLOWED_B
NOT_ALLOWED_B OARD~3,
OARD(NOT_ALLO UNKNOWN~4,
WED_BOARD), NULL~5
UNKNOWN(UNKN
OWN), NULL(null)

None Interval Type 0~255 N/A None

Intra-LTE Load
Interval Type 1~100 N/A %
Balancing
Inter-RAT Load
Sharing to UTRAN
Interval Type 1~100 N/A %
Inter-RAT Load
Sharing to GERAN
Intra-LTE Load
Balancing
Inter-RAT Load
Interval Type 0~50 N/A %
Sharing to UTRAN
Inter-RAT Load
Sharing to GERAN
Intra-LTE Load
Balancing
Inter-RAT Load
Interval Type 1~50 N/A %
Sharing to UTRAN
Inter-RAT Load
Sharing to GERAN
Inter-RAT Load
Sharing to UTRAN
Interval Type 1~100 N/A %
Inter-RAT Load
Sharing to GERAN

Inter-RAT Load
Interval Type 1~30 N/A s
Sharing to UTRAN
Intra-LTE Load
Interval Type 0~100 N/A %
Balancing

PRB_ONLY(PrbMo
de), PRB_ONLY~0,
Intra-LTE User UE_NUMBER_ONL UE_NUMBER_ONL
Number Load Enumeration Type Y(UeNumMode), Y~1, None
Balancing PRB_OR_UE_NUM PRB_OR_UE_NUM
BER(PrbOrUeNum BER~2
Mode)
Intra-LTE User
Number Load Interval Type 1~10000 N/A None
Balancing
Intra-LTE User
Number Load Interval Type 0~10000 N/A None
Balancing
Intra-LTE User
Number Load Interval Type 1~20 N/A None
Balancing
Intra-LTE User
Number Load Interval Type 0~100 N/A %
Balancing

NON_TRIGGERED
(NON_TRIGGERE NON_TRIGGERED
Intra-LTE Enumeration Type D), ~0, None
UENUMBASED(UE UENUMBASED~1
NUMBASED)
 NON_SHARING(N
ON_SHARING),
Operator Load NON_SHARING~0,
SHARING(SHARIN
Based Intra-LTE Enumeration Type SHARING~1, None
G),
MLB OVERSHARING~2
OVERSHARING(O
VERSHARING)
Intra-LTE User
Number Load Interval Type 0~100 N/A %
Balancing

Inter-RAT Load
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Sharing to UTRAN
Intra-LTE Load Proportion(Proporti
Bit Field Type Proportion~0 None
Balancing on)
Intra-LTE Load
Interval Type 0~10000 N/A None
Balancing
Intra-LTE Load
Interval Type 0~10000 N/A None
Balancing
 SynchronizedUE(Sy
nchronizedUE),
SynchronizedUE~0,
IdleUE(IdleUE),
Intra-LTE User IdleUE~1,
PrbMlbSynchronize
Number Load Bit Field Type PrbMlbSynchronize None
dUE(PrbMlbSynchr
Balancing dUE~2,
onizedUE),
PrbMlbIdleUE~3
PrbMlbIdleUE(PrbM
lbIdleUE)
Intra-LTE User
Number Load Interval Type 1~10000 N/A None
Balancing
Inter-RAT Load
Sharing to UTRAN
Interval Type 1~10000 N/A None
Inter-RAT Load
Sharing to GERAN
Intra-LTE User
Number Load Interval Type 5~30 N/A s
Balancing
Inter-RAT Load
Sharing to UTRAN
Interval Type 5~30 N/A s
Inter-RAT Load
Sharing to GERAN
 FAIRSTRATEGY(F
Intra-LTE User FAIRSTRATEGY~0,
airStrategy),
Number Load Enumeration Type PRIORITYBASED~ None
PRIORITYBASED(
Balancing 1
PriorityBased)
Intra-LTE User
ADAPTIVE(Adaptiv ADAPTIVE~0,
Number Load Enumeration Type None
e), ALL(All) ALL~1
Balancing
Inter-RAT Load
Sharing to UTRAN
Interval Type 0~10000 N/A None
Inter-RAT Load
Sharing to GERAN
 LOADINFOFREQ(L
Intra-LTE User
OADINFOFREQ), LOADINFOFREQ~
Number Load Enumeration Type None
ALLFREQ(ALLFRE 0, ALLFREQ~1
Balancing
Q)
 PRBRATIOHIGHM
Inter-RAT Load ODE(PRBRATIOHI PRBRATIOHIGHM
Sharing to UTRAN GHMODE), ODE~0,
Enumeration Type None
Inter-RAT Load PRBRATIOLOWMO PRBRATIOLOWMO
Sharing to GERAN DE(PRBRATIOLO DE~1
WMODE)
Inter-RAT Load
Sharing to UTRAN
Interval Type 0~50 N/A %
Inter-RAT Load
Sharing to GERAN
 PRB_USAGE(PRB
_USAGE),
PRB_VALUATION_
PRB_USAGE~0,
WITH_CTRL(PRB_
PRB_VALUATION_
Intra-LTE Load VALUATION_WITH
Enumeration Type WITH_CTRL~1, None
Balancing _CTRL),
PRB_VALUATION_
PRB_VALUATION_
NO_CTRL~2
NO_CTRL(PRB_VA
LUATION_NO_CTR
L)
Intra-LTE Load
Interval Type 0~3600 N/A s
Balancing
 ONLY_STRONGES
Intra-LTE Load T_CELL(Only Try ONLY_STRONGES
Balancing Strongest Cell), T_CELL~0,
Intra-LTE User Enumeration Type PERMIT_NON_ST PERMIT_NON_ST None
Number Load RONGEST_CELL( RONGEST_CELL~
Balancing Permit Trying Non- 1
Strongest Cell)
 IRAT_PRB_ONLY(
PRB Usage),
IRAT_PRB_ONLY~
IRAT_UE_NUMBE
Inter-RAT Load 0,
R_ONLY(UE
Sharing to UTRAN IRAT_UE_NUMBE
Enumeration Type Number), None
Inter-RAT Load R_ONLY~1,
IRAT_PRB_OR_UE
Sharing to GERAN IRAT_PRB_OR_UE
_NUMBER(PRB
_NUMBER~2
Usage or UE
Number)
Inter-RAT Load
Sharing to UTRAN
Interval Type 1~10000 N/A None
Inter-RAT Load
Sharing to GERAN

Intra-LTE Load
Balancing
Intra-LTE User
Number Load Interval Type 1~127 N/A None
Balancing
Inter-RAT Load
Sharing to UTRAN
Intra-LTE Load
Balancing
Intra-LTE User
Number Load Interval Type 0~127 N/A None
Balancing
Inter-RAT Load
Sharing to UTRAN

Intra-LTE Load
Balancing
Intra-LTE User
Number Load Interval Type 0~127 N/A None
Balancing
Inter-RAT Load
Sharing to UTRAN

Multi-RRU Cell PrbUsage(PrbUsag

Bit Field Type PrbUsage~0 None
Load Balancing e)
Intra-LTE Load
Balancing
Operator Load Interval Type 0~100 N/A %
Based Intra-LTE
MLB
Intra-LTE Load
Balancing
Operator Load Interval Type 0~10000 N/A None
Based Intra-LTE
MLB
Intra-LTE User
Number Load
Balancing
Interval Type 1~100 N/A None
Operator Load
Based Intra-LTE
MLB
Inter-RAT Load
Sharing to UTRAN
Interval Type 1~20 N/A None
Inter-RAT Load
Sharing to GERAN
Inter-RAT Load
Sharing to UTRAN
Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
Inter-RAT Load
Sharing to GERAN
 INTERRATMLBUE
NUMTHD(INTERRA
INTERRATMLBUE
RIM Based LTE TMLBUENUMTHD)
NUMTHD~0,
Target Cell Enumeration Type , None
L2UMLBTRIGGER
Selection L2UMLBTRIGGER
STATUS~1
STATUS(L2UMLBT
RIGGERSTATUS)

Intra-LTE Load
Interval Type 1~60 N/A s
Balancing
Intra-LTE Load
Balancing WEIGHTEDUENU
WEIGHTEDUENU
Intra-LTE User Bit Field Type M(WEIGHTEDUEN None
M~0
Number Load UM)
Balancing

None Interval Type 0~255 N/A None

Auto Neighbor
Group Interval Type 0~100 N/A %
Configuration
Auto Neighbor
Group Interval Type 0~100 N/A %
Configuration
Auto Neighbor
Group Interval Type 1~65535 N/A min
Configuration

Auto Neighbor
Group Interval Type 0~65535 N/A min
Configuration
 NOT_ALLOWED(N
Auto Neighbor
OT_ALLOWED), NOT_ALLOWED~0
Group Enumeration Type None
ALLOWED(ALLOW , ALLOWED~1
Configuration
ED)

Intra-LTE Load
Interval Type 1~65535 N/A None
Balancing
Auto Neighbor FREE(FREE),
FREE~0,
Group Enumeration Type CONTROLLED(CO None
CONTROLLED~1
Configuration NTROLLED)

None Interval Type 0~255 N/A None

 UsUeGuaranteeSwi
tch(UsUeGuarantee
Switch),
UsHoSwitch(UsHoS
witch),
UsCellReselSwitch(
UsUeGuaranteeSwi
UsCellReselSwitch)
tch~0,
,
UsHoSwitch~1,
UsUePuschPcPriori
UsCellReselSwitch
tySwitch(UsUePusc
~2,
hPcPrioritySwitch),
UsUePuschPcPriori
DlUsVoIPCqiAdjOpt
tySwitch~3,
Switch(DlUsVoIPCq
DlUsVoIPCqiAdjOpt
iAdjOptSwitch),
Switch~4,
UsCellNotDriveNsS
UsCellNotDriveNsS
witch(UsCellNotDriv
witch~5,
eNsSwitch),
NsRbRestrictSwitch
NsRbRestrictSwitch
None Bit Field Type ~6, None
(NsRbRestrictSwitc
UsCtrlDRXSwitch~7
h),
, SfCtrlAsScell~8,
UsCtrlDRXSwitch(U
SfCtrlAsInterNcell~
sCtrlDRXSwitch),
9,
SfCtrlAsScell(SfCtrl
UsSccHoSwitch~10
AsScell),
,
SfCtrlAsInterNcell(S
UlUsVoipRbRsvSwi
fCtrlAsInterNcell),
tch~11,
UsSccHoSwitch(Us
ULCoMPResource
SccHoSwitch),
Ctrl~12,
UlUsVoipRbRsvSwi
UsUlCaSchSwitch~
tch(UlUsVoipRbRsv
13
Switch),
ULCoMPResource
Ctrl(ULCoMPResou
rceCtrl),
UsUlCaSchSwitch(
UsUlCaSchSwitch)

None Interval Type 1~40 N/A ms

None Interval Type 1~40 N/A ms

None Interval Type 45~1500 N/A byte

None Interval Type 45~1500 N/A byte

None Interval Type 0~60000 N/A ms

None Interval Type 0~60000 N/A ms

None Interval Type 0~100 N/A %

None Interval Type 0~10000 N/A None

None Interval Type 0~20 N/A dB

None Interval Type 0~20 N/A dBm

None Interval Type 0~255 N/A None

None Interval Type 1~360 N/A min

None Interval Type 3~3600 N/A s

None Interval Type -141~-43 N/A dBm

None Interval Type -40~-6 N/A 0.5dB

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

 DB_6_P_A(-6 dB),
DB_4DOT77_P_A(- DB_6_P_A~0,
4.77 dB), DB_4DOT77_P_A~
DB_3_P_A(-3 dB), 1, DB_3_P_A~2,
DB_1DOT77_P_A(- DB_1DOT77_P_A~
None Enumeration Type None
1.77 dB), 3, DB0_P_A~4,
DB0_P_A(0 dB), DB1_P_A~5,
DB1_P_A(1 dB), DB2_P_A~6,
DB2_P_A(2 dB), DB3_P_A~7
DB3_P_A(3 dB)

None Interval Type 0~20 N/A dB

None Interval Type 10~90 N/A %

None Interval Type 1~21600 N/A s

None Interval Type 0~12500 N/A kB/s
None Interval Type 0~12500 N/A kB/s

None Interval Type 0~10 N/A 0.5dB

None Interval Type 0~99 N/A None
None Interval Type 0~99 N/A None

Percent10, Percent10~0,
None Enumeration Type None
Percent30 Percent30~1

None Interval Type 0~65535 N/A s

None Interval Type 0~255 N/A None

None Interval Type 0~1000 N/A per mill

None Interval Type 0~1000 N/A per mill

None Interval Type 0~255 N/A None

Physical Channel CONGREG_LV4, CONGREG_LV4~2,

Enumeration Type None
Management CONGREG_LV8 CONGREG_LV8~3
Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management

Adaptive
Interval Type 1~100 N/A 0.5dB
SFN/SDMA
Physical Channel
Interval Type 1~4 N/A None
Management
Physical Channel
Interval Type 0~100 N/A %
Management
 OFF(Off), ON(On),
OFF~0, ON~1,
Physical Channel ECFIADAPTIONON
Enumeration Type ECFIADAPTIONON None
Management (Enhanced CFI
~2
Adaption On)
Physical Channel
Interval Type 1~100 N/A %
Management

Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

AVERAGE(AVERA
GE),
AVERAGE~0,
MINUS_3DB_FIXE
MINUS_3DB_FIXE
D(MINUS_3DB_FIX
None Enumeration Type D~1, None
ED),
MINUS_6DB_FIXE
MINUS_6DB_FIXE
D~2
D(MINUS_6DB_FIX
ED)
 STRATEGYBASED
ONCAPACITY(Cap
acity-based STRATEGYBASED
Selection Strategy), ONCAPACITY~1,
None Enumeration Type None
STRATEGYBASED STRATEGYBASED
ONCOVERAGE(Co ONCOVERAGE~2
verage-based
Selection Strategy)
Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management

Physical Channel
Interval Type 75~120 N/A None
Management
Physical Channel
Enumeration Type 1(1), 2(2), 3(3) 1~1, 2~2, 3~3 None
Management
 STRATEGYBASED
ONCOVERAGE(Co
verage-based STRATEGYBASED
Physical Channel Selection Strategy), ONCOVERAGE~1,
Enumeration Type None
Management STRATEGYBASED STRATEGYBASED
ONCAPACITY(Cap ONCAPACITY~2
acity-based
Selection Strategy)
Physical Channel
Interval Type 0~1 N/A None
Management
Adaptive
Interval Type 0~100 N/A 0.5dB
SFN/SDMA
 ReserveCommonC
Physical Channel CESwitch(Reserve ReserveCommonC
Bit Field Type None
Management CommonCCESwitc CESwitch~0
h)
 1_2(1:2), 1_1(1:1), 1_2~0, 1_1~1,
2_1(2:1), 3_1(3:1), 2_1~2, 3_1~3,
Physical Channel 4_1(4:1), 5_1(5:1), 4_1~4, 5_1~5,
Enumeration Type None
Management 6_1(6:1), 7_1(7:1), 6_1~6, 7_1~7,
8_1(8:1), 9_1(9:1), 8_1~8, 9_1~9,
10_1(10:1) 10_1~10
Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management

PDCCH Utilization
Improvement;Physi
Interval Type 0~1000 N/A None
cal Channel
Management
Physical Channel
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
 EpdcchFunctionSwi
Physical Channel EpdcchFunctionSwi
Bit Field Type tch(EpdcchFunction None
Management tch~0
Switch)

Physical Channel
Interval Type 0~100 N/A None
Management
Physical Channel
Interval Type 0~100 N/A None
Management

Physical Channel
Interval Type 0~100 N/A None
Management

Physical Channel
Interval Type 0~100 N/A None
Management
Physical Channel
Interval Type 0~100 N/A None
Management

None Interval Type 0~255 N/A None

Physical Channel
Interval Type 0~50 N/A None
Management
Physical Channel FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
Management TRUE(TRUE)
 SriAdaptiveHoldFor
VoIPSW(SriAdaptiv
eHoldForVoIPSW), SriAdaptiveHoldFor
SriPeriodCfgOptSW VoIPSW~0,
Physical Channel (SriPeriodCfgOptS SriPeriodCfgOptSW
Bit Field Type None
Management W), ~1,
SriOffsetReConfigF SriOffsetReConfigF
orDrxSW(SriOffset orDrxSW~2
ReConfigForDrxSW
)

3GPP R8
Interval Type 0~255 N/A None
Specifications
RRC Connection
Interval Type 0~10800 N/A None
Management
Dynamic
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Scheduling
 BasedA3EdgeUser
BasedA3EdgeUser
None Bit Field Type Switch(BasedA3Ed None
Switch~0
geUserSwitch)

None Interval Type -30~30 N/A 0.5dB

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 1~1000000 N/A kbps

None Interval Type 0~100 N/A %

3GPP R8
Interval Type 0~255 N/A None
Specifications
 CustomFrameOffse
t(User-defined
frame offset),
CustomFrameOffse
TL_FrameOffset(T-
t~0,
L Dual Mode frame
None Enumeration Type TL_FrameOffset~1, None
offset),
TL_FrameOffset_S
TL_FrameOffset_S
A2_SSP5~2
A2_SSP5(T-L Dual
Mode SA2+SSP5
frame offset)

0~261120,275943~
None Interval Type N/A Ts
307200

None Interval Type 0~255 N/A None

Sleeping Cell
Compound Type 00:00:00~23:59:59 N/A None
Detection

Sleeping Cell
Compound Type 00:00:00~23:59:59 N/A None
Detection
Sleeping Cell
Interval Type 0~72 N/A h
Detection

None Interval Type 0~255 N/A None

MODE1(UL band
division scheme
Uplink Static Inter- No.1), MODE2(UL
Cell Interference band division
MODE1~1,
Coordination scheme No.2),
MODE2~2,
Uplink Dynamic Enumeration Type MODE3(UL band None
MODE3~3,
Inter-Cell division scheme
INVALID~255
Interference No.3),
Coordination INVALID(Invalid UL
band division
scheme)

None Interval Type 0~255 N/A None

GSM and LTE
Buffer Zone Interval Type 1~10 N/A 2RB
Optimization(LTE)

None Interval Type -6~12 N/A dB

Out of Band Relay
Interval Type 0~255 N/A None
introduction

1_10(1/10),
2_10(2/10),
3_10(3/10),
1_10~0, 2_10~1,
4_10(4/10),
3_10~2, 4_10~3,
Out of Band Relay 5_10(5/10),
Enumeration Type 5_10~4, 6_10~5, None
introduction 6_10(6/10),
7_10~6, 8_10~7,
7_10(7/10),
9_10~8, 10_10~9
8_10(8/10),
9_10(9/10),
10_10(10/10)
 1_10(1/10),
2_10(2/10),
3_10(3/10),
1_10~0, 2_10~1,
4_10(4/10),
3_10~2, 4_10~3,
Out of Band Relay 5_10(5/10),
Enumeration Type 5_10~4, 6_10~5, None
introduction 6_10(6/10),
7_10~6, 8_10~7,
7_10(7/10),
9_10~8, 10_10~9
8_10(8/10),
9_10(9/10),
10_10(10/10)

Out of Band Relay

Interval Type 1~40 N/A ms
introduction
Out of Band Relay
Interval Type 45~1500 N/A byte
introduction

Out of Band Relay

Interval Type 1~99 N/A None
introduction

Out of Band Relay

Interval Type 1~99 N/A None
introduction
 UlSPSDegradeSwit
Out of Band Relay UlSPSDegradeSwit
Bit Field Type ch(UlSPSDegradeS None
introduction ch~0
witch)

DlSPSDegradeSwit
Out of Band Relay DlSPSDegradeSwit
Bit Field Type ch(DlSPSDegradeS None
introduction ch~0
witch)

None Interval Type 0~255 N/A None

None Interval Type 0~9 N/A None
 TM1(TM1),
TM2(TM2),
TM1~0, TM2~1,
TM4(TM4),
None Enumeration Type TM4~3, TM7~6, None
TM7(TM7),
TM8~7, TM9~8
TM8(TM8),
TM9(TM9)

None Interval Type 0~15 N/A None

None Interval Type 0~70560 N/A min

None Interval Type 0~100 N/A RB

None Interval Type 0~100 N/A RB

None Interval Type 0~4294967295 N/A 0.01mW

None Interval Type 0~70560 N/A 0.01mW

None Interval Type 0~1200 N/A None

None Interval Type 0~1200 N/A None

None Interval Type 0~70560 N/A min

Super Combined
Interval Type 0~255 N/A None
Cell

Super Combined
Interval Type 0~65535 N/A None
Cell

Super Combined
String Type 3 characters N/A None
Cell
Super Combined
String Type 2~3 characters N/A None
Cell

Super Combined
Interval Type 0~1048575 N/A None
Cell

Super Combined
Interval Type 0~255 N/A None
Cell

Super Combined
Interval Type 0~65535 N/A None
Cell
None Interval Type 0~255 N/A None

MOD_PERIOD_CO MOD_PERIOD_CO
EFF_N2(2), EFF_N2~0,
MOD_PERIOD_CO MOD_PERIOD_CO
Broadcast of EFF_N4(4), EFF_N4~1,
Enumeration Type None
system information MOD_PERIOD_CO MOD_PERIOD_CO
EFF_N8(8), EFF_N8~2,
MOD_PERIOD_CO MOD_PERIOD_CO
EFF_N16(16) EFF_N16~3

None Interval Type 0~255 N/A None

Dynamic Downlink
Power Allocation
Interval Type -3175~3175 N/A 0.005dB
Broadcast of
system information
Dynamic Downlink
Power Allocation
Interval Type -3175~3175 N/A 0.005dB
Broadcast of
system information
Dynamic Downlink
Power Allocation
Interval Type -3175~3175 N/A 0.005dB
Broadcast of
system information
Dynamic Downlink
Power Allocation
Interval Type -3175~3175 N/A 0.005dB
Broadcast of
system information
Paging
Dynamic Downlink
Power Allocation Interval Type -3175~3175 N/A 0.005dB
Broadcast of
system information
Dynamic Downlink
Power Allocation
Interval Type -3175~3175 N/A 0.005dB
Broadcast of
system information
Dynamic Downlink
Power Allocation
Interval Type -3175~3175 N/A 0.005dB
LoCation Services
(LCS)

Dynamic Downlink
Interval Type 20~40 N/A W
Power Allocation
eMBMS Phase 1
based on
Interval Type 0~60,255 N/A 0.1dB
Centralized MCE
Architecture

Dynamic Downlink
Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None
Power Allocation
None Interval Type 0~255 N/A None

Dynamic Downlink
Power Allocation
Interval Type -600~500 N/A 0.1dBm
Broadcast of
system information
Dynamic Downlink
Power Allocation
Interval Type 0~3 N/A None
Broadcast of
system information

None Interval Type 0~60 N/A 0.1dB

None Interval Type 0~255 N/A None

 DB0_PWR_RAMPI DB0_PWR_RAMPI
Broadcast of NG_STEP(0dB), NG_STEP~0,
system information DB2_PWR_RAMPI DB2_PWR_RAMPI
Random Access NG_STEP(2dB), NG_STEP~1,
Enumeration Type dB
Procedure DB4_PWR_RAMPI DB4_PWR_RAMPI
Uplink Power NG_STEP(4dB), NG_STEP~2,
Control DB6_PWR_RAMPI DB6_PWR_RAMPI
NG_STEP(6dB) NG_STEP~3

DBM_120(-
120dBm),
DBM_118(-
118dBm),
DBM_116(-
116dBm),
DBM_120~0,
DBM_114(-
DBM_118~1,
114dBm),
DBM_116~2,
DBM_112(-
DBM_114~3,
112dBm),
DBM_112~4,
DBM_110(-
Broadcast of DBM_110~5,
110dBm),
system information DBM_108~6,
DBM_108(-
Random Access DBM_106~7,
Enumeration Type 108dBm), dBm
Procedure DBM_104~8,
DBM_106(-
Uplink Power DBM_102~9,
106dBm),
Control DBM_100~10,
DBM_104(-
DBM_98~11,
104dBm),
DBM_96~12,
DBM_102(-
DBM_94~13,
102dBm),
DBM_92~14,
DBM_100(-
DBM_90~15
100dBm),
DBM_98(-98dBm),
DBM_96(-96dBm),
DBM_94(-94dBm),
DBM_92(-92dBm),
DBM_90(-90dBm)
None Interval Type 0~15 N/A None

B56_MSG_SIZE_G B56_MSG_SIZE_G
ROUPA(56bits), ROUPA~0,
Broadcast of B144_MSG_SIZE_ B144_MSG_SIZE_
system information GROUPA(144bits), GROUPA~1,
Enumeration Type bit
Random Access B208_MSG_SIZE_ B208_MSG_SIZE_
Procedure GROUPA(208bits), GROUPA~2,
B256_MSG_SIZE_ B256_MSG_SIZE_
GROUPA(256bits) GROUPA~3

Broadcast of
system information
Interval Type 0~94 N/A None
Random Access
Procedure
Broadcast of NOT_CFG(Not
NOT_CFG~0,
system information Enumeration Type configure), None
CFG~1
RACH Optimization CFG(Configure)

Broadcast of
system information
Random Access Interval Type 0~63 N/A None
Procedure
RACH Optimization
 N3_PREMB_TRAN
S_MAX(3times), N3_PREMB_TRAN
N4_PREMB_TRAN S_MAX~0,
S_MAX(4times), N4_PREMB_TRAN
N5_PREMB_TRAN S_MAX~1,
S_MAX(5times), N5_PREMB_TRAN
N6_PREMB_TRAN S_MAX~2,
S_MAX(6times), N6_PREMB_TRAN
N7_PREMB_TRAN S_MAX~3,
S_MAX(7times), N7_PREMB_TRAN
Broadcast of N8_PREMB_TRAN S_MAX~4,
system information S_MAX(8times), N8_PREMB_TRAN
Enumeration Type None
Random Access N10_PREMB_TRA S_MAX~5,
Procedure NS_MAX(10times), N10_PREMB_TRA
N20_PREMB_TRA NS_MAX~6,
NS_MAX(20times), N20_PREMB_TRA
N50_PREMB_TRA NS_MAX~7,
NS_MAX(50times), N50_PREMB_TRA
N100_PREMB_TR NS_MAX~8,
ANS_MAX(100time N100_PREMB_TR
s), ANS_MAX~9,
N200_PREMB_TR N200_PREMB_TR
ANS_MAX(200time ANS_MAX~10
s)

SF40_MAC_RESO
LUTION_TIMER(40
), SF40_MAC_RESO
SF48_MAC_RESO LUTION_TIMER~4,
Broadcast of LUTION_TIMER(48 SF48_MAC_RESO
system information ), LUTION_TIMER~5,
Enumeration Type subframe
Random Access SF56_MAC_RESO SF56_MAC_RESO
Procedure LUTION_TIMER(56 LUTION_TIMER~6,
), SF64_MAC_RESO
SF64_MAC_RESO LUTION_TIMER~7
LUTION_TIMER(64
)
Broadcast of
system information
Interval Type 1~8 N/A None
Random Access
Procedure

Ratio4(4/64),
Ratio4~0, Ratio8~1,
Ratio8(8/64),
Ratio12~2,
Ratio12(12/64),
Ratio16~3,
Ratio16(16/64),
Ratio20~4,
Ratio20(20/64),
Ratio24~5,
Ratio24(24/64),
Ratio28~6,
Ratio28(28/64),
Ratio32~7,
Random Access Ratio32(32/64),
Enumeration Type Ratio36~8, None
Procedure Ratio36(36/64),
Ratio40~9,
Ratio40(40/64),
Ratio44~10,
Ratio44(44/64),
Ratio48~11,
Ratio48(48/64),
Ratio52~12,
Ratio52(52/64),
Ratio56~13,
Ratio56(56/64),
Ratio60~14,
Ratio60(60/64),
Ratio64~15
Ratio64(64/64)
Random Access
Interval Type 6~100 N/A %
Procedure

None Interval Type 0~255 N/A None

 SC0(0), SC1(1), SC0~0, SC1~1,
SC2(2), SC3(3), SC2~2, SC3~3,
SC4(4), SC5(5), SC4~4, SC5~5,
SC6(6), SC7(7), SC6~6, SC7~7,
Physical Channel SC8(8), SC9(9), SC8~8, SC9~9,
Enumeration Type None
Management SC10(10), SC10~10,
SC11(11), SC11~11,
SC12(12), SC12~12,
SC13(13), SC13~13,
SC14(14) SC14~14
 BOOLEAN_FALSE( BOOLEAN_FALSE
Physical Channel False), ~0,
Enumeration Type None
Management BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 BOOLEAN_FALSE( BOOLEAN_FALSE
Physical Channel False), ~0,
Enumeration Type None
Management BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 ACCESS_FIRST(A
ccess First),
ACCESS_FIRST~0
EXPERIENCE_FIR
,
ST(Experience
EXPERIENCE_FIR
First),
Physical Channel ST~1,
Enumeration Type EXPERIENCE_EN None
Management EXPERIENCE_EN
HANCED(Experien
HANCED~2,
ce Enhanced),
ACCESS_ENHANC
ACCESS_ENHANC
ED~3
ED(Access
Enhanced)
 DEFAULTMODE(D
DEFAULTMODE~0,
efault Mode),
None Enumeration Type ADAPTIVEMODE~ None
ADAPTIVEMODE(A
1
daptive Mode)
 SrsSubframeRecfg
OptSwitch( SrsSubf SrsSubframeRecfg
None Bit Field Type None
rameRecfgOptSwitc OptSwitch~0
h)

BW0(BW0),
BW1(BW1),
BW2(BW2),
BW0~0, BW1~1,
BW3(BW3),
BW2~2, BW3~3,
BW4(BW4),
BW4~4, BW5~5,
None Enumeration Type BW5(BW5), None
BW6~6, BW7~7,
BW6(BW6),
INVALID_BANDWI
BW7(BW7),
DTH~255
INVALID_BANDWI
DTH(Invalid
bandwidth)

None Interval Type 0~255 N/A None

Physical Channel
Management
Compact NORMAL, NORMAL~0,
Enumeration Type None
Bandwidth EXTENDED EXTENDED~1
Broadcast of
system information

Physical Channel
Management
ONE_SIXTH~0,
Compact ONE_SIXTH, HALF,
Enumeration Type HALF~1, ONE~2, None
Bandwidth ONE, TWO
TWO~3
Broadcast of
system information

None Interval Type 0~255 N/A None

 rf32(32 radio
frames), rf64(64
Broadcast of
radio frames), rf32~0, rf64~1,
system information Enumeration Type None
rf128(128 radio rf128~2, rf256~3
Paging
frames), rf256(256
radio frames)

FOURT~0,
FOURT, TWOT,
TWOT~1, ONET~2,
ONET, HALFT,
HALFT~3,
QUARTERT,
Broadcast of QUARTERT~4,
ONE_EIGHTT,
system information Enumeration Type ONE_EIGHTT~5, None
ONE_SIXTEENTHT
Paging ONE_SIXTEENTHT
,
~6,
ONE_THIRTY_SEC
ONE_THIRTY_SEC
ONDT
ONDT~7
Paging Interval Type 1~3 N/A None
Paging Interval Type 1~16 N/A None
 PAGING_STRATE
GY_FIFO(First-in
PAGING_STRATE
First-out Strategy),
GY_FIFO~0,
Paging Enumeration Type PAGING_STRATE None
PAGING_STRATE
GY_DIFFPRI(Priorit
GY_DIFFPRI~1
y Differentiation
Strategy)

None Interval Type 0~255 N/A None

Broadcast of
Interval Type 1~4 N/A None
system information

INTER_SUB_FRA
INTER_SUB_FRA
ME(Inter),
Broadcast of ME~0,
Enumeration Type INTRA_AND_INTE None
system information INTRA_AND_INTE
R_SUB_FRAME(Int
R_SUB_FRAME~1
er And Intra)
Broadcast of
Interval Type 0~98 N/A RB
system information
 BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
Broadcast of
Interval Type 0~29 N/A None
system information
 BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

Broadcast of
Interval Type 0~7 N/A None
system information
 BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
UL 64QAM Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
UL 64QAM Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

None Interval Type 0~255 N/A None

 DS1_DELTA_SHIF DS1_DELTA_SHIF
T(ds1), T~0,
Physical Channel DS2_DELTA_SHIF DS2_DELTA_SHIF
Enumeration Type None
Management T(ds2), T~1,
DS3_DELTA_SHIF DS3_DELTA_SHIF
T(ds3) T~2

Physical Channel
Interval Type 0~1000 N/A None
Management
Physical Channel
Interval Type 0~20 N/A None
Management

Physical Channel
Management
Interval Type 1~24 N/A 2RB
PUCCH Flexible
Configuration

3GPP R8
Specifications
Interval Type 0~2047 N/A None
Physical Channel
Management
 FIXEDMODE(Fixed
Mode),
FIXEDMODE~0,
RANDOMMODE(R
Physical Channel RANDOMMODE~1,
Enumeration Type andom Mode), None
Management OPTISELECTMOD
OPTISELECTMOD
E~2
E(OPTISELECTMO
DE)
 OFF(OFF),
OFF~0,
QCIADAPTIVE(QCI
Physical Channel QCIADAPTIVE~1,
Enumeration Type ADAPTIVE), None
Management NOQCIADAPTIVE~
NOQCIADAPTIVE(
2
NOQCIADAPTIVE)

FIXEDMODE(Fixed
Physical Channel Mode), FIXEDMODE~0,
Enumeration Type None
Management RANDOMMODE(R RANDOMMODE~1
andom Mode)
None Interval Type 0~255 N/A None

CS Fallback to
CDMA2000 1xRTT
Enhanced CS String Type 3 characters N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS String Type 2~3 characters N/A None
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 1~4095 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~15 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~32767 N/A None
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~65535 N/A None
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS String Type 0~8 characters N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT
 bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5,
CS Fallback to bc4, bc5, bc6, bc7, bc6~6, bc7~7,
CDMA2000 1xRTT bc8, bc9, bc10, bc8~8, bc9~9,
Enhanced CS Enumeration Type bc11, bc12, bc13, bc10~10, bc11~11, None
Fallback to bc14, bc15, bc16, bc12~12, bc13~13,
CDMA2000 1xRTT bc17, bc18, bc19, bc14~14, bc15~15,
bc20, bc21 bc16~16, bc17~17,
bc18~18, bc19~19,
bc20~20, bc21~21

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
BOOLEAN_FALSE( BOOLEAN_FALSE
CDMA2000 1xRTT
False), ~0,
Enhanced CS Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
Fallback to
True) 1
CDMA2000 1xRTT
CS Fallback to
BOOLEAN_FALSE( BOOLEAN_FALSE
CDMA2000 1xRTT
False), ~0,
Enhanced CS Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
Fallback to
True) 1
CDMA2000 1xRTT

CS Fallback to
BOOLEAN_FALSE( BOOLEAN_FALSE
CDMA2000 1xRTT
False), ~0,
Enhanced CS Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
Fallback to
True) 1
CDMA2000 1xRTT
CS Fallback to
BOOLEAN_FALSE( BOOLEAN_FALSE
CDMA2000 1xRTT
False), ~0,
Enhanced CS Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
Fallback to
True) 1
CDMA2000 1xRTT

CS Fallback to
BOOLEAN_FALSE( BOOLEAN_FALSE
CDMA2000 1xRTT
False), ~0,
Enhanced CS Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
Fallback to
True) 1
CDMA2000 1xRTT
CS Fallback to
BOOLEAN_FALSE( BOOLEAN_FALSE
CDMA2000 1xRTT
False), ~0,
Enhanced CS Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
Fallback to
True) 1
CDMA2000 1xRTT

CS Fallback to
BOOLEAN_FALSE( BOOLEAN_FALSE
CDMA2000 1xRTT
False), ~0,
Enhanced CS Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
Fallback to
True) 1
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~127 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~4095 N/A None
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~63 N/A None
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~255 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~255 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~7 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to IMSIS_ESN(IMSI_S
CDMA2000 1xRTT and ESN), IMSIS_ESN~0,
Enhanced CS Enumeration Type IMSI(IMSI), IMSI~2, None
Fallback to IMSI_ESN(IMSI IMSI_ESN~3
CDMA2000 1xRTT and ESN)
CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~255 N/A 0.125dB
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~255 N/A 0.125dB
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~255 N/A 0.125dB
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~255 N/A 0.125dB
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~255 N/A 0.125dB
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 1~15 N/A None
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~255 N/A 80ms
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT NOT_CFG(Not
NOT_CFG~0,
Enhanced CS Enumeration Type configure), None
CFG~1
Fallback to CFG(Configure)
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
Enhanced CS Interval Type 0~255 N/A 100ms
Fallback to
CDMA2000 1xRTT

None Interval Type 0~255 N/A None

PS Inter-RAT
Mobility between E-
String Type 3~28 characters N/A None
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
String Type 3~8 characters N/A None
UTRAN and
CDMA2000

bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5,
bc4, bc5, bc6, bc7, bc6~6, bc7~7,
PS Inter-RAT
bc8, bc9, bc10, bc8~8, bc9~9,
Mobility between E-
Enumeration Type bc11, bc12, bc13, bc10~10, bc11~11, None
UTRAN and
bc14, bc15, bc16, bc12~12, bc13~13,
CDMA2000
bc17, bc18, bc19, bc14~14, bc15~15,
bc20, bc21 bc16~16, bc17~17,
bc18~18, bc19~19,
bc20~20, bc21~21
PS Inter-RAT
Mobility between E-
Interval Type 0~2047 N/A None
UTRAN and
CDMA2000

PS Inter-RAT PERMIT_HO_ENU PERMIT_HO_ENU

Mobility between E- M(Permit Ho), M~0,
Enumeration Type None
UTRAN and FORBID_HO_ENU FORBID_HO_ENU
CDMA2000 M(Forbid Ho) M~1

PERMIT_RMV_EN
PS Inter-RAT
UM(Permit ANR PERMIT_RMV_EN
Mobility between E-
Remove), UM~0,
UTRAN and Enumeration Type None
FORBID_RMV_EN FORBID_RMV_EN
CDMA2000
UM(Forbid ANR UM~1
Inter-RAT ANR
Remove)

PS Inter-RAT
BOOLEAN_FALSE( BOOLEAN_FALSE
Mobility between E-
False), ~0,
UTRAN and Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
CDMA2000
True) 1
Inter-RAT ANR
PS Inter-RAT
Mobility between E-
String Type 0~99 characters N/A None
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
String Type 0~99 characters N/A None
UTRAN and
CDMA2000
PS Inter-RAT
AUTO_MODE(Auto
Mobility between E-
Mode), AUTO_MODE~0,
UTRAN and Enumeration Type None
MANUAL_MODE(M MANUAL_MODE~1
CDMA2000
anual Mode)
Inter-RAT ANR

None Interval Type 0~255 N/A None

PS Inter-RAT
Mobility between E-
String Type 3 characters N/A None
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
String Type 2~3 characters N/A None
UTRAN and
CDMA2000
PS Inter-RAT BOOLEAN_FALSE( BOOLEAN_FALSE
Mobility between E- False), ~0,
Enumeration Type None
UTRAN and BOOLEAN_TRUE( BOOLEAN_TRUE~
CDMA2000 True) 1

PS Inter-RAT
NOT_CFG(Not
Mobility between E- NOT_CFG~0,
Enumeration Type configure), None
UTRAN and CFG~1
CFG(Configure)
CDMA2000

PS Inter-RAT BOOLEAN_FALSE( BOOLEAN_FALSE

Mobility between E- False), ~0,
Enumeration Type None
UTRAN and BOOLEAN_TRUE( BOOLEAN_TRUE~
CDMA2000 True) 1

PS Inter-RAT
Mobility between E-
Interval Type 0~255 N/A None
UTRAN and
CDMA2000
PS Inter-RAT
NOT_CFG(Not
Mobility between E- NOT_CFG~0,
Enumeration Type configure), None
UTRAN and CFG~1
CFG(Configure)
CDMA2000

PS Inter-RAT
Mobility between E-
Interval Type 0~255 N/A None
UTRAN and
CDMA2000

PS Inter-RAT
NOT_CFG(Not
Mobility between E- NOT_CFG~0,
Enumeration Type configure), None
UTRAN and CFG~1
CFG(Configure)
CDMA2000
PS Inter-RAT
Mobility between E-
Interval Type 0~255 N/A None
UTRAN and
CDMA2000

None Interval Type 0~255 N/A None

PS Inter-RAT
Mobility between E-
String Type 3 characters N/A None
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
String Type 2~3 characters N/A None
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
String Type 3~28 characters N/A None
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
String Type 3~8 characters N/A None
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
Interval Type 0~50 N/A None
UTRAN and
CDMA2000

None Interval Type 0~255 N/A None

bc0~0, bc1~1,
CS Fallback to bc2~2, bc3~3,
CDMA2000 1xRTT bc0, bc1, bc2, bc3, bc4~4, bc5~5,
PS Inter-RAT bc4, bc5, bc6, bc7, bc6~6, bc7~7,
Mobility between E- bc8, bc9, bc10, bc8~8, bc9~9,
UTRAN and Enumeration Type bc11, bc12, bc13, bc10~10, bc11~11, None
CDMA2000 bc14, bc15, bc16, bc12~12, bc13~13,
Enhanced CS bc17, bc18, bc19, bc14~14, bc15~15,
Fallback to bc20, bc21 bc16~16, bc17~17,
CDMA2000 1xRTT bc18~18, bc19~19,
bc20~20, bc21~21
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~2047 N/A None
CDMA2000
Enhanced CS
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and Interval Type -15~15 N/A dB
CDMA2000
Enhanced CS
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E- NOT_CFG(Not
NOT_CFG~0,
UTRAN and Enumeration Type configure), None
CFG~1
CDMA2000 CFG(Configure)
Enhanced CS
Fallback to
CDMA2000 1xRTT
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~15 N/A None
CDMA2000
Enhanced CS
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~32 N/A None
CDMA2000
Enhanced CS
Fallback to
CDMA2000 1xRTT

Coordinated
Scheduling based
Power
Control(Cloud BB)
Interval Type 0~65535 N/A None
Coordinated
Scheduling based
Power Control
(Cloud BB)
Inter-eNodeB DL
CoMP based on
Relaxed backhaul
Inter-eNodeB DL
CoMP Based on
Coordinated BBU
Coordinated
Scheduling based CSPC(CSPC), CSPC~0,
Power Enumeration Type DLCOMP(DLCOMP DLCOMP~1, None
Control(Cloud BB) ), CAMC(CAMC) CAMC~2
Coordinated
Scheduling based
Power Control
(Cloud BB)
Inter-eNodeB
Coordinated Uplink
AMC

Coordinated
Scheduling based
Power
Control(Cloud BB)
Interval Type 0~65535 N/A None
Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
Power
Control(Cloud BB)
String Type 3 characters N/A None
Coordinated
Scheduling based
Power Control
(Cloud BB)
Coordinated
Scheduling based
Power
Control(Cloud BB);
String Type 2~3 characters N/A None
Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
Power
Control(Cloud BB)
Interval Type 0~1048575 N/A None
Coordinated
Scheduling based
Power Control
(Cloud BB)
Coordinated
Scheduling based
Power
Control(Cloud BB)
Interval Type 0~255 N/A None
Coordinated
Scheduling based
Power Control
(Cloud BB)

DLCOMP_STATUS
_NORMAL(Normal)
,
CELL_OUTBOUND
(Number of cells DLCOMP_STATUS
exceeded the _NORMAL~0,
specifications), CELL_OUTBOUND
CELL_CONFIG_DI ~1,
FF(Mismatched CELL_CONFIG_DI
configuration with FF~2,
other cluster cells), EX2_ABNORMAL~
None Enumeration Type None
EX2_ABNORMAL(e 3,
X2 link CELL_ABNORMAL
disconnected), ~4,
CELL_ABNORMAL SCHNODE_ABNO
(Cell unavailable), RMAL~5,
SCHNODE_ABNO OTHER_ABNORM
RMAL(Centralized AL~255
scheduling node
unavailable),
OTHER_ABNORM
AL(Other errors)
 _NORMAL(Normal)
,
CELL_STATUS_AB
NORMAL(Cell
status abnormal),
CLOCK_ABNORM
AL(Clock
inaccurate), ULCAMC_STATUS
ULCAMC_SWITCH _NORMAL~0,
(UL CAMC disabled CELL_STATUS_AB
or no license), NORMAL~1,
CLUSTER_ABNOR CLOCK_ABNORM
MAL(Clustering AL~2,
node unavailable), ULCAMC_SWITCH
LINK_ABNORMAL( ~3,
Link disconnected), CLUSTER_ABNOR
LINK_CONGESTIO MAL~4,
N(Link congested), LINK_ABNORMAL
None Enumeration Type RTT_DELAY(RTT ~5, None
delay exceeding the LINK_CONGESTIO
threshold), N~6,
MULTI_CLUSTER_ RTT_DELAY~7,
ABNORMAL(Mana MULTI_CLUSTER_
ged by multiple ABNORMAL~8,
clustering nodes), NO_COMMAND_R
NO_COMMAND_R ECEIVED~9,
ECEIVED(Centraliz CONTROL_NODE_
ed Control Node FAILURE~10,
Command Not OTHER_ABNORM
Received), AL~255
CONTROL_NODE_
FAILURE(Faulty
Centralized Control
Node or No
Centralized Control
Node),
OTHER_ABNORM
Coordinated
Scheduling based
String Type 3 characters N/A None
Power
Control(Cloud BB)

Coordinated
Scheduling based
String Type 2~3 characters N/A None
Power
Control(Cloud BB)
Coordinated
Scheduling based
Interval Type 0~1048575 N/A None
Power
Control(Cloud BB)

Coordinated
Scheduling based
Interval Type 0~255 N/A None
Power
Control(Cloud BB)
Coordinated
Scheduling based
String Type 3 characters N/A None
Power
Control(Cloud BB)

Coordinated
Scheduling based
String Type 2~3 characters N/A None
Power
Control(Cloud BB)
Coordinated
Scheduling based
Interval Type 0~1048575 N/A None
Power
Control(Cloud BB)
Coordinated
Scheduling based
Interval Type 0~255 N/A None
Power
Control(Cloud BB)

Coordinated
Scheduling based
Interval Type 0~19 N/A None
Power
Control(Cloud BB)

Coordinated
Scheduling based
Interval Type 0~19 N/A None
Power
Control(Cloud BB)
Coordinated
Scheduling based
String Type 3 characters N/A None
Power
Control(Cloud BB)

Coordinated
Scheduling based
String Type 2~3 characters N/A None
Power
Control(Cloud BB)
Coordinated
Scheduling based
Interval Type 0~1048575 N/A None
Power
Control(Cloud BB)

Coordinated
Scheduling based
Interval Type 0~255 N/A None
Power
Control(Cloud BB)
RAN Sharing with
Common Carrier
RAN Sharing with
String Type 3 characters N/A None
Dedicated Carrier
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
RAN Sharing with
String Type 2~3 characters N/A None
Dedicated Carrier
Hybrid RAN
Sharing

None Interval Type 0~1048575 N/A None

RAN Sharing with
Common Carrier
Interval Type 0~255 N/A None
RAN Sharing with
Dedicated Carrier

RAN Sharing with

Common Carrier
RAN Sharing with
String Type 3 characters N/A None
Dedicated Carrier
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
RAN Sharing with
String Type 2~3 characters N/A None
Dedicated Carrier
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
Interval Type 0~65535 N/A None
RAN Sharing with
Dedicated Carrier

RAN Sharing with

Common Carrier
Interval Type 1~65533,65535 N/A None
RAN Sharing with
Dedicated Carrier

RAN Sharing with

Common Carrier
String Type 3 characters N/A None
RAN Sharing with
Dedicated Carrier
RAN Sharing with
Common Carrier
String Type 2~3 characters N/A None
RAN Sharing with
Dedicated Carrier

RAN Sharing with

Common Carrier
String Type 3 characters N/A None
RAN Sharing with
Dedicated Carrier

RAN Sharing with

Common Carrier
String Type 2~3 characters N/A None
RAN Sharing with
Dedicated Carrier
RAN Sharing with
Common Carrier
String Type 3 characters N/A None
RAN Sharing with
Dedicated Carrier

RAN Sharing with

Common Carrier
String Type 2~3 characters N/A None
RAN Sharing with
Dedicated Carrier
RAN Sharing with
Common Carrier
Interval Type 0~65535 N/A None
RAN Sharing with
Dedicated Carrier
RAN Sharing with
Common Carrier
Interval Type 0~65535 N/A None
RAN Sharing with
Dedicated Carrier

RAN Sharing with

Common Carrier
String Type 3 characters N/A None
RAN Sharing with
Dedicated Carrier
RAN Sharing with
Common Carrier
String Type 2~3 characters N/A None
RAN Sharing with
Dedicated Carrier

PS Inter-RAT
Mobility between E-
String Type 3~28 characters N/A None
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
String Type 3~8 characters N/A None
UTRAN and
CDMA2000

bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5,
bc4, bc5, bc6, bc7, bc6~6, bc7~7,
PS Inter-RAT
bc8, bc9, bc10, bc8~8, bc9~9,
Mobility between E-
Enumeration Type bc11, bc12, bc13, bc10~10, bc11~11, None
UTRAN and
bc14, bc15, bc16, bc12~12, bc13~13,
CDMA2000
bc17, bc18, bc19, bc14~14, bc15~15,
bc20, bc21 bc16~16, bc17~17,
bc18~18, bc19~19,
bc20~20, bc21~21
PS Inter-RAT
Mobility between E-
Interval Type 0~2047 N/A None
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
String Type 3 characters N/A None
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
String Type 2~3 characters N/A None
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
Interval Type 0~511 N/A None
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
String Type 0~99 characters N/A None
UTRAN and
CDMA2000
PS Inter-RAT
AUTO_MODE(Auto
Mobility between E-
Mode), AUTO_MODE~0,
UTRAN and Enumeration Type None
MANUAL_MODE(M MANUAL_MODE~1
CDMA2000
anual Mode)
Inter-RAT ANR

Enhanced CS
Fallback to Interval Type 1~4095 N/A None
CDMA2000 1xRTT
Enhanced CS
Fallback to Interval Type 0~15 N/A None
CDMA2000 1xRTT

bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5,
bc4, bc5, bc6, bc7, bc6~6, bc7~7,
Enhanced CS bc8, bc9, bc10, bc8~8, bc9~9,
Fallback to Enumeration Type bc11, bc12, bc13, bc10~10, bc11~11, None
CDMA2000 1xRTT bc14, bc15, bc16, bc12~12, bc13~13,
bc17, bc18, bc19, bc14~14, bc15~15,
bc20, bc21 bc16~16, bc17~17,
bc18~18, bc19~19,
bc20~20, bc21~21

Enhanced CS
Fallback to Interval Type 0~2047 N/A None
CDMA2000 1xRTT

Enhanced CS
Fallback to Interval Type 0~32767 N/A None
CDMA2000 1xRTT
Enhanced CS
Fallback to Interval Type 0~65535 N/A None
CDMA2000 1xRTT

Enhanced CS
Fallback to String Type 3 characters N/A None
CDMA2000 1xRTT
Enhanced CS
Fallback to String Type 2~3 characters N/A None
CDMA2000 1xRTT

Enhanced CS
Fallback to String Type 0~8 characters N/A None
CDMA2000 1xRTT
Enhanced CS
Fallback to Interval Type 0~511 N/A None
CDMA2000 1xRTT

Enhanced CS
Fallback to String Type 0~99 characters N/A None
CDMA2000 1xRTT

Enhanced CS AUTO_MODE(Auto
Fallback to Mode), AUTO_MODE~0,
Enumeration Type None
CDMA2000 1xRTT MANUAL_MODE(M MANUAL_MODE~1
Inter-RAT ANR anual Mode)
None Interval Type 0~255 N/A None

Enhanced CS
Fallback to Interval Type 1~4095 N/A None
CDMA2000 1xRTT

Enhanced CS
Fallback to Interval Type 0~15 N/A None
CDMA2000 1xRTT

bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5,
bc4, bc5, bc6, bc7, bc6~6, bc7~7,
Enhanced CS bc8, bc9, bc10, bc8~8, bc9~9,
Fallback to Enumeration Type bc11, bc12, bc13, bc10~10, bc11~11, None
CDMA2000 1xRTT bc14, bc15, bc16, bc12~12, bc13~13,
bc17, bc18, bc19, bc14~14, bc15~15,
bc20, bc21 bc16~16, bc17~17,
bc18~18, bc19~19,
bc20~20, bc21~21
Enhanced CS
Fallback to Interval Type 0~2047 N/A None
CDMA2000 1xRTT

Enhanced CS
Fallback to Interval Type 0~32767 N/A None
CDMA2000 1xRTT

Enhanced CS
Fallback to Interval Type 0~65535 N/A None
CDMA2000 1xRTT

PERMIT_HO_ENU PERMIT_HO_ENU
Enhanced CS
M(Permit Ho), M~0,
Fallback to Enumeration Type None
FORBID_HO_ENU FORBID_HO_ENU
CDMA2000 1xRTT
M(Forbid Ho) M~1
 PERMIT_RMV_EN
Enhanced CS UM(Permit ANR PERMIT_RMV_EN
Fallback to Remove), UM~0,
Enumeration Type None
CDMA2000 1xRTT FORBID_RMV_EN FORBID_RMV_EN
Inter-RAT ANR UM(Forbid ANR UM~1
Remove)

Enhanced CS BOOLEAN_FALSE( BOOLEAN_FALSE

Fallback to False), ~0,
Enumeration Type None
CDMA2000 1xRTT BOOLEAN_TRUE( BOOLEAN_TRUE~
Inter-RAT ANR True) 1

Enhanced CS
Fallback to String Type 0~99 characters N/A None
CDMA2000 1xRTT
Enhanced CS
Fallback to String Type 0~99 characters N/A None
CDMA2000 1xRTT
Enhanced CS AUTO_MODE(Auto
Fallback to Mode), AUTO_MODE~0,
Enumeration Type None
CDMA2000 1xRTT MANUAL_MODE(M MANUAL_MODE~1
Inter-RAT ANR anual Mode)

None Interval Type 0~255 N/A None

 bc0~0, bc1~1,
bc2~2, bc3~3,
Cell Selection and bc0, bc1, bc2, bc3, bc4~4, bc5~5,
Re-selection bc4, bc5, bc6, bc7, bc6~6, bc7~7,
CS Fallback to bc8, bc9, bc10, bc8~8, bc9~9,
CDMA2000 1xRTT Enumeration Type bc11, bc12, bc13, bc10~10, bc11~11, None
Enhanced CS bc14, bc15, bc16, bc12~12, bc13~13,
Fallback to bc17, bc18, bc19, bc14~14, bc15~15,
CDMA2000 1xRTT bc20, bc21 bc16~16, bc17~17,
bc18~18, bc19~19,
bc20~20, bc21~21

Cell Selection and

Re-selection
CS Fallback to NOT_CFG(Not
NOT_CFG~0,
CDMA2000 1xRTT Enumeration Type configure), None
CFG~1
Enhanced CS CFG(Configure)
Fallback to
CDMA2000 1xRTT

Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT Interval Type 0~7 N/A None
Enhanced CS
Fallback to
CDMA2000 1xRTT
Cell Selection and
Re-selection
CS Fallback to
CDMA2000 1xRTT Interval Type -63~0 N/A 0.5dB
Enhanced CS
Fallback to
CDMA2000 1xRTT

Cell Selection and

Re-selection
CS Fallback to
CDMA2000 1xRTT Interval Type -63~0 N/A 0.5dB
Enhanced CS
Fallback to
CDMA2000 1xRTT
Cell Selection and
Re-selection
NOT_CFG(Not
PS Inter-RAT NOT_CFG~0,
Enumeration Type configure), None
Mobility between E- CFG~1
CFG(Configure)
UTRAN and
CDMA2000

Cell Selection and

Re-selection
PS Inter-RAT
Interval Type 0~7 N/A None
Mobility between E-
UTRAN and
CDMA2000

Cell Selection and

Re-selection
PS Inter-RAT
Interval Type -63~0 N/A 0.5dB
Mobility between E-
UTRAN and
CDMA2000
Cell Selection and
Re-selection
PS Inter-RAT
Interval Type -63~0 N/A 0.5dB
Mobility between E-
UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
String Type 3 characters N/A None
UTRAN and
GERAN

PS Inter-RAT
Mobility between E-
String Type 2~3 characters N/A None
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
Interval Type 0~65535 N/A None
UTRAN and
GERAN

SRVCC to GERAN
CS Fallback with Interval Type 1~65533,65535 N/A None
LAI to GERAN

PS Inter-RAT
NOT_CFG(Not
Mobility between E- NOT_CFG~0,
Enumeration Type configure), None
UTRAN and CFG~1
CFG(Configure)
GERAN

CS Fallback to
GERAN
Flash CS Fallback
to GERAN
Interval Type 0~255 N/A None
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN
CS Fallback to
GSM_dcs1800, GSM_dcs1800~0,
GERAN Enumeration Type None
GSM_pcs1900 GSM_pcs1900~1
Service based inter-
RAT handover to
GERAN
Distance based
inter-RAT handover
to GERAN

PS Inter-RAT
Mobility between E-
Interval Type 0~1023 N/A None
UTRAN and
GERAN

PS Inter-RAT
Mobility between E-
Interval Type 0~7 N/A None
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
Interval Type 0~7 N/A None
UTRAN and
GERAN

PS Inter-RAT
Mobility between E-
DTM_AVAILABLE~
UTRAN and DTM_AVAILABLE,
0,
GERAN Enumeration Type DTM_NOT_AVAILA None
DTM_NOT_AVAILA
Service based inter- BLE
BLE~1
RAT handover to
GERAN
PS Inter-RAT
Mobility between E-
String Type 0~99 characters N/A None
UTRAN and
GERAN

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
SRVCC to GERAN Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 BOOLEAN_FALSE( BOOLEAN_FALSE
Ultra-Flash CSFB to False), ~0,
Enumeration Type None
GERAN BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
Camp Enumeration Type NO(No), YES(Yes) NO~0, YES~1 None
 AUTO_MODE(Auto
Mode), AUTO_MODE~0,
Inter-RAT ANR Enumeration Type None
MANUAL_MODE(M MANUAL_MODE~1
anual Mode)

None Interval Type 0~255 N/A None

PS Inter-RAT
Mobility between E-
String Type 3 characters N/A None
UTRAN and
GERAN

PS Inter-RAT
Mobility between E-
String Type 2~3 characters N/A None
UTRAN and
GERAN

SRVCC to GERAN
Flash CS Fallback
to GERAN
CS Fallback with
LAI to GERAN Interval Type 1~65533,65535 N/A None
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN

PS Inter-RAT
Mobility between E-
Interval Type 0~65535 N/A None
UTRAN and
GERAN
 PERMIT_RMV_EN
UM(Permit ANR PERMIT_RMV_EN
Remove), UM~0,
Inter-RAT ANR Enumeration Type None
FORBID_RMV_EN FORBID_RMV_EN
UM(Forbid ANR UM~1
Remove)
PS Inter-RAT PERMIT_HO_ENU PERMIT_HO_ENU
Mobility between E- M(Permit Ho), M~0,
Enumeration Type None
UTRAN and FORBID_HO_ENU FORBID_HO_ENU
GERAN M(Forbid Ho) M~1

PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN Interval Type 0~32 N/A None
CS Fallback to
GERAN
Flash CS Fallback
to GERAN

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
Inter-RAT ANR Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
Automatic Neighbor
Relation (ANR) String Type 0~99 characters N/A None
Inter-RAT ANR

Automatic
Neighbour Relation
String Type 0~99 characters N/A None
(ANR)
Inter-RAT ANR
Multi-RAT Carrier
Joint Intelligent Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
Shutdown(eNodeB)

Inter-RAT ANR
Flash CS Fallback Interval Type 0~64 N/A None
to GERAN;
 AUTO_MODE(Auto
Mode), AUTO_MODE~0,
Inter-RAT ANR Enumeration Type None
MANUAL_MODE(M MANUAL_MODE~1
anual Mode)

None Interval Type 0~1048575 N/A None

None String Type 0~32 characters N/A None

None String Type 0~32 characters N/A None

None Interval Type 0~255 N/A None

Cell Selection and

Re-selection
PS Inter-RAT
Interval Type 0~31 N/A None
Mobility between E-
UTRAN and
GERAN

PS Inter-RAT
Mobility between E- GSM, GPRS, GSM~0, GPRS~1,
Enumeration Type None
UTRAN and EDGE EDGE~2
GERAN

Cell Selection and

Re-selection
PS Inter-RAT
Interval Type 0~1023 N/A None
Mobility between E-
UTRAN and
GERAN
Cell Selection and
Re-selection
PS Inter-RAT GSM_dcs1800, GSM_dcs1800~0,
Enumeration Type None
Mobility between E- GSM_pcs1900 GSM_pcs1900~1
UTRAN and
GERAN

Cell Selection and

NOT_CFG(Not
Reselection / Cell NOT_CFG~0,
Enumeration Type configure), None
Selection and Re- CFG~1
CFG(Configure)
selection
Cell Selection and
Interval Type 0~7 N/A None
Reselection

PS Inter-RAT
NOT_CFG(Not
Mobility between E- NOT_CFG~0,
Enumeration Type configure), None
UTRAN and CFG~1
CFG(Configure)
GERAN
Cell Selection and
Interval Type 0~39 N/A dBm
Reselection

Cell Selection and

Interval Type 0~45 N/A 2dBm
Reselection
Cell Selection and
Interval Type 0~31 N/A 2dB
Reselection
Cell Selection and
Interval Type 0~31 N/A 2dB
Reselection

PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN Interval Type -15~15 N/A dB
CS Fallback to
GERAN
Flash CS Fallback
to GERAN
Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Interval Type 0~255 N/A None
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
SRVCC to GERAN Interval Type 0~8 N/A None
CS Fallback to
GERAN
Flash CS Fallback
to GERAN
 NON_CONTINUOU
S(NON_CONTINU NON_CONTINUOU
None Enumeration Type OUS), S~0, None
CONTINUOUS(CO CONTINUOUS~1
NTINUOUS)
 BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
Inter-RAT ANR Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

NOT_ALLOWED(N
OT_ALLOWED), NOT_ALLOWED~0
Inter-RAT ANR Enumeration Type None
ALLOWED(ALLOW , ALLOWED~1
ED)
Inter-RAT ANR Interval Type 0~31 N/A None

None Interval Type 0~255 N/A None

Cell Selection and

Re-selection
PS Inter-RAT
Mobility between E-
Interval Type 0~31 N/A None
UTRAN and
GERAN
Broadcast of
system information
Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
Interval Type 0~1023 N/A None
UTRAN and
GERAN
Broadcast of
system information

None Interval Type 0~255 N/A None

Broadcast of
system information
Coverage Based Interval Type 0~503 N/A None
Intra-frequency
Handover

Cell Selection and

Re-selection
Coverage Based String Type 0~99 characters N/A None
Intra-frequency
Handover

n1(n1), n4(n4),
n8(n8), n12(n12),
n1~0, n4~1, n8~2,
n16(n16), n24(n24),
Broadcast of n12~3, n16~4,
n32(n32), n48(n48),
system information n24~5, n32~6,
n64(n64), n84(n84),
Coverage Based Enumeration Type n48~7, n64~8, None
n96(n96),
Intra-frequency n84~9, n96~10,
n128(n128),
Handover n128~11, n168~12,
n168(n168),
n252~13, n504~14
n252(n252),
n504(n504)
None Interval Type 0~255 N/A None

Coverage Based
Intra-frequency String Type 3 characters N/A None
Handover

Coverage Based
Intra-frequency String Type 2~3 characters N/A None
Handover
None Interval Type 0~1048575 N/A None

Coverage Based
Intra-frequency Interval Type 0~255 N/A None
Handover
 dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
Coverage Based
dB0(0dB), dB-3~12, dB-2~13,
Intra-frequency
dB1(1dB), dB-1~14, dB0~15,
Handover Enumeration Type dB
dB2(2dB), dB1~16, dB2~17,
Mobility
dB3(3dB), dB3~18, dB4~19,
Management
dB4(4dB), dB5~20, dB6~21,
dB5(5dB), dB8~22, dB10~23,
dB6(6dB), dB12~24, dB14~25,
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
dB0(0dB), dB-3~12, dB-2~13,
Coverage Based
dB1(1dB), dB-1~14, dB0~15,
Intra-frequency Enumeration Type dB
dB2(2dB), dB1~16, dB2~17,
Handover
dB3(3dB), dB3~18, dB4~19,
dB4(4dB), dB5~20, dB6~21,
dB5(5dB), dB8~22, dB10~23,
dB6(6dB), dB12~24, dB14~25,
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
 PERMIT_HO_ENU PERMIT_HO_ENU
Coverage Based
M(Permit Ho), M~0,
Intra-frequency Enumeration Type None
FORBID_HO_ENU FORBID_HO_ENU
Handover
M(Forbid Ho) M~1

PERMIT_RMV_EN
UM(Permit ANR PERMIT_RMV_EN
Automatic
Remove), UM~0,
Neighbour Relation Enumeration Type None
FORBID_RMV_EN FORBID_RMV_EN
(ANR)
UM(Forbid ANR UM~1
Remove)

BOOLEAN_FALSE( BOOLEAN_FALSE
Automatic
False), ~0,
Neighbour Relation Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
(ANR)
True) 1

Coverage Based
Intra-frequency
Handover
String Type 0~99 characters N/A None
Automatic
Neighbour Relation
(ANR)
Coverage Based
Intra-frequency
Handover
String Type 0~99 characters N/A None
Automatic
Neighbour Relation
(ANR)
Coverage Based
Intra-frequency
Handover
LOW_PRIORITY(L
Distance Based LOW_PRIORITY~0
ow Priority),
Inter-frequency Enumeration Type , None
HIGH_PRIORITY(H
Handover HIGH_PRIORITY~1
igh Priority)
Service Based
Inter-frequency
Handover
Static TDM
eICIC/Dynamic Interval Type 0~15 N/A dB
TDM eICIC

FORMAL(FORMAL
Neighbor cell
), FORMAL~0,
Classification Enumeration Type None
EXTENDED(EXTE EXTENDED~1
Management
NDED)
 AUTO_MODE(Auto
Distance Based
Mode), AUTO_MODE~0,
Inter-frequency Enumeration Type None
MANUAL_MODE(M MANUAL_MODE~1
Handover
anual Mode)

Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Interval Type 0~503 N/A None
Handover
Cell Selection and
Reselection / Cell
Selection and Re-
selection
RAN Sharing with
Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
0~46589,54436~65
Handover Interval Type N/A None
535
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD

Dynamic TDM
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
eICIC
None Interval Type 0~255 N/A None

Coverage Based
Inter-frequency
Handover
Cell Selection and
Re-selection
Distance Based
Inter-frequency 0~46589,54436~65
Interval Type N/A None
Handover 535
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD

Coverage Based
Inter-frequency
Handover
Cell Selection and
Re-selection
Distance Based
NOT_CFG(Not
Inter-frequency NOT_CFG~0,
Enumeration Type configure), None
Handover CFG~1
CFG(Configure)
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
Coverage Based
Inter-frequency
Handover
Cell Selection and
Re-selection
Distance Based
Inter-frequency 18000~46589,5443
Interval Type N/A None
Handover 6~65535
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD

NOT_CFG(Not
Cell Selection and NOT_CFG~0,
Enumeration Type configure), None
Re-selection CFG~1
CFG(Configure)
Cell Selection and
Interval Type 0~7 N/A None
Reselection
Cell Selection and
Interval Type 0~7 N/A s
Re-selection

NOT_CFG(Not
Cell Selection and NOT_CFG~0,
Enumeration Type configure), None
Re-selection CFG~1
CFG(Configure)
 0DOT25_ENUM(0.
25),
0DOT25_ENUM~0,
0DOT5_ENUM(0.5)
Cell Selection and 0DOT5_ENUM~1,
Enumeration Type , None
Re-selection 0DOT75_ENUM~2,
0DOT75_ENUM(0.
1DOT0_ENUM~3
75),
1DOT0_ENUM(1.0)

0DOT25_ENUM(0.
25),
0DOT25_ENUM~0,
0DOT5_ENUM(0.5)
Cell Selection and 0DOT5_ENUM~1,
Enumeration Type , None
Re-selection 0DOT75_ENUM~2,
0DOT75_ENUM(0.
1DOT0_ENUM~3
75),
1DOT0_ENUM(1.0)
Coverage Based
Inter-frequency
MBW6(1.4M), MBW6~0,
Handover
MBW15(3M), MBW15~1,
Distance Based
MBW25(5M), MBW25~2,
Inter-frequency Enumeration Type None
MBW50(10M), MBW50~3,
Handover
MBW75(15M), MBW75~4,
Service Based
MBW100(20M) MBW100~5
Inter-frequency
Handover

dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
dB0(0dB), dB-3~12, dB-2~13,
Cell Selection and dB1(1dB), dB-1~14, dB0~15,
Enumeration Type dB
Re-selection dB2(2dB), dB1~16, dB2~17,
dB3(3dB), dB3~18, dB4~19,
dB4(4dB), dB5~20, dB6~21,
dB5(5dB), dB8~22, dB10~23,
dB6(6dB), dB12~24, dB14~25,
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
Cell Selection and
Interval Type 0~31 N/A 2dB
Reselection

Cell Selection and

Interval Type 0~31 N/A 2dB
Reselection
Cell Selection and
Interval Type -70~-22 N/A 2dBm
Reselection

NOT_CFG(Not
Cell Selection and NOT_CFG~0,
Enumeration Type configure), None
Reselection CFG~1
CFG(Configure)
Cell Selection and
Interval Type -30~33 N/A dBm
Reselection

Coverage Based
Inter-frequency
Handover
Cell Selection and
BitString00(00), BitString00~0,
Re-selection
BitString01(01), BitString01~1,
Distance Based Enumeration Type None
BitString10(10), BitString10~2,
Inter-frequency
BitString11(11) BitString11~3
Handover
Service Based
Inter-frequency
Handover
Coverage Based
Inter-frequency
Handover
Cell Selection and
BOOLEAN_FALSE( BOOLEAN_FALSE
Re-selection
False), ~0,
Distance Based Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
Inter-frequency
True) 1
Handover
Service Based
Inter-frequency
Handover

Intra-LTE Load
Balancing
Intra-LTE User
EventA3(EventA3), EventA3~0,
Number Load
Enumeration Type EventA4(EventA4), EventA4~1, None
Balancing
EventA5(EventA5) EventA5~2
Operator Load
Based Intra-LTE
MLB
Cell Selection and
Reselection / Cell
Interval Type 0~31 N/A dB
Selection and Re-
selection
Cell Selection and
Reselection / Cell
Interval Type 0~31 N/A dB
Selection and Re-
selection

Cell Selection and

NOT_CFG(Not
Reselection / Cell NOT_CFG~0,
Enumeration Type configure), None
Selection and Re- CFG~1
CFG(Configure)
selection
Cell Selection and
Interval Type -34~-3 N/A dB
Re-selection

Coverage Based
Inter-frequency
Handover
Interval Type 0~8 N/A None
Distance Based
Inter-frequency
Handover
 NOT_ALLOWED(N
Intra-LTE Load OT_ALLOWED), NOT_ALLOWED~0
Enumeration Type None
Balancing ALLOWED(ALLOW , ALLOWED~1
ED)

DISABLE(Disable), DISABLE~0,
None Enumeration Type None
ENABLE(Enable) ENABLE~1
Intra-LTE Load
Interval Type 0~100 N/A %
Balancing

Intra-LTE Load
Interval Type 0~7 N/A None
Balancing
 dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
Coverage Based
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
Inter-frequency
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
Handover
dB0(0dB), dB-3~12, dB-2~13,
Distance Based
dB1(1dB), dB-1~14, dB0~15,
Inter-frequency Enumeration Type dB
dB2(2dB), dB1~16, dB2~17,
Handover
dB3(3dB), dB3~18, dB4~19,
Service Based
dB4(4dB), dB5~20, dB6~21,
Inter-frequency
dB5(5dB), dB8~22, dB10~23,
Handover
dB6(6dB), dB12~24, dB14~25,
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)

Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency Interval Type 0~8 N/A None
Handover
Service Based
Inter-frequency
Handover
Coverage Based
Inter-frequency Interval Type -20~20 N/A dBm
Handover
Intra-LTE Load
Interval Type -20~20 N/A dBm
Balancing
Multi-Band
FALSE(False),
Compatibility Enumeration Type FALSE~0, TRUE~1 None
TRUE(True)
Enhancement
 BOOLEAN_FALSE( BOOLEAN_FALSE
Automatic
False), ~0,
Neighbour Relation Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
(ANR)
True) 1

LOW_SPEED(Low
speed Inter-
frequency),
HIGH_SPEED(High
Handover
speed Inter- LOW_SPEED~0,
Enhancement at
frequency), HIGH_SPEED~1,
Speed Mobility
ULTRA_HIGH_SPE ULTRA_HIGH_SPE
Handover Enumeration Type None
ED(Ultra high ED~2,
Enhancement at
speed Inter- EXTRA_HIGH_SPE
Ultra High Speed
frequency), ED~3
Mobility
EXTRA_HIGH_SPE
ED(Extra high
speed Inter-
frequency)
 NOT_ALLOWED(N
Automatic
OT_ALLOWED), NOT_ALLOWED~0
Neighbour Relation Enumeration Type None
ALLOWED(ALLOW , ALLOWED~1
(ANR)
ED)

Coverage Based
Inter-frequency Interval Type 0~8 N/A None
Handover
Coverage Based
Inter-frequency Interval Type 0~8 N/A None
Handover

NOT_ALLOWED(N
OT_ALLOWED), NOT_ALLOWED~0
None Enumeration Type None
ALLOWED(ALLOW , ALLOWED~1
ED)
Automatic
Neighbour Relation Interval Type 0~31 N/A None
(ANR)

NOT_ALLOWED(N
Intra-LTE Backoff OT_ALLOWED), NOT_ALLOWED~0
Enumeration Type None
Load Balancing ALLOWED(ALLOW , ALLOWED~1
ED)
Intra-LTE Load
Balancing
Intra-LTE User
EventA4(EventA4), EventA4~0,
Number Load
Enumeration Type EventA5(EventA5), EventA5~1, None
Balancing
EventA3(EventA3) EventA3~2
Operator Load
Based Intra-LTE
MLB

SpeedMobilityTarge
SpeedMobilityTarge
None Bit Field Type tInd(SpeedMobilityT None
tInd~0
argetInd)
Intra-LTE Load
Interval Type 1~10000 N/A None
Balancing

NOT_ALLOWED(N
Uplink Traffic-based OT_ALLOWED), NOT_ALLOWED~0
Enumeration Type None
MLB to LTE FDD ALLOWED(ALLOW , ALLOWED~1
ED)
Uplink Traffic-based
Interval Type 0~7 N/A None
MLB to LTE FDD

Intra-LTE Load
Interval Type -30~30 N/A 0.5dB
Balancing
 AUTO_MODE(Auto
Automatic
Mode), AUTO_MODE~0,
Neighbour Relation Enumeration Type None
MANUAL_MODE(M MANUAL_MODE~1
(ANR)
anual Mode)

None Interval Type 0~255 N/A None

Cell Selection and
Reselection
0~46589,54436~65
Coverage Based Interval Type N/A None
535
Inter-frequency
Handover

Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency Interval Type 0~503 N/A None
Handover
Service Based
Inter-frequency
Handover

Cell Selection and

Re-selection
Coverage Based String Type 0~99 characters N/A None
Inter-frequency
Handover

n1(n1), n4(n4),
Coverage Based
n8(n8), n12(n12),
Inter-frequency n1~0, n4~1, n8~2,
n16(n16), n24(n24),
Handover n12~3, n16~4,
n32(n32), n48(n48),
Distance Based n24~5, n32~6,
n64(n64), n84(n84),
Inter-frequency Enumeration Type n48~7, n64~8, None
n96(n96),
Handover n84~9, n96~10,
n128(n128),
Service Based n128~11, n168~12,
n168(n168),
Inter-frequency n252~13, n504~14
n252(n252),
Handover
n504(n504)
None Interval Type 0~255 N/A None

Coverage Based
Inter-frequency String Type 3 characters N/A None
Handover

Coverage Based
Inter-frequency String Type 2~3 characters N/A None
Handover
None Interval Type 0~1048575 N/A None

Coverage Based
Inter-frequency Interval Type 0~255 N/A None
Handover
 dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
Coverage Based dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
Inter-frequency 2dB), dB-1(-1dB), dB-5~10, dB-4~11,
Distance Based dB0(0dB), dB-3~12, dB-2~13,
Inter-frequency dB1(1dB), dB-1~14, dB0~15,
Enumeration Type dB
Handover dB2(2dB), dB1~16, dB2~17,
Service Based dB3(3dB), dB3~18, dB4~19,
Inter-frequency dB4(4dB), dB5~20, dB6~21,
Handover dB5(5dB), dB8~22, dB10~23,
dB6(6dB), dB12~24, dB14~25,
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
dB0(0dB), dB-3~12, dB-2~13,
Cell Selection and dB1(1dB), dB-1~14, dB0~15,
Enumeration Type dB
Re-selection dB2(2dB), dB1~16, dB2~17,
dB3(3dB), dB3~18, dB4~19,
dB4(4dB), dB5~20, dB6~21,
dB5(5dB), dB8~22, dB10~23,
dB6(6dB), dB12~24, dB14~25,
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency PERMIT_HO_ENU PERMIT_HO_ENU
Handover M(Permit Ho), M~0,
Enumeration Type None
Service Based FORBID_HO_ENU FORBID_HO_ENU
Inter-frequency M(Forbid Ho) M~1
Handover
Cell Outage
Detection and
Compensation

Automatic PERMIT_RMV_EN
Neighbour Relation UM(Permit ANR PERMIT_RMV_EN
(ANR) Remove), UM~0,
Enumeration Type None
Cell Outage FORBID_RMV_EN FORBID_RMV_EN
Detection and UM(Forbid ANR UM~1
Compensation Remove)

Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency Interval Type 0~32 N/A None
Handover
Mobility between
LTE TDD and LTE
FDD
 BOOLEAN_FALSE( BOOLEAN_FALSE
Automatic
False), ~0,
Neighbour Relation Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
(ANR)
True) 1

Coverage Based
Inter-frequency
Handover String Type 0~99 characters N/A None
Automatic Neighbor
Relation (ANR)

Coverage Based
Inter-frequency
Handover
String Type 0~99 characters N/A None
Automatic
Neighbour Relation
(ANR)
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency LOW_PRIORITY(L
LOW_PRIORITY~0
Handover ow Priority),
Enumeration Type , None
Service Based HIGH_PRIORITY(H
HIGH_PRIORITY~1
Inter-frequency igh Priority)
Handover
Mobility between
LTE TDD and LTE
FDD
Intra-LTE Load
Balancing
Automatic Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
Neighbour Relation
(ANR)

NULL(NULL),
Coverage Based
SAME(SAME), NULL~0, SAME~1,
Inter-frequency Enumeration Type None
BIG(BIG), BIG~2, SMALL~3
Handover
SMALL(SMALL)
 FORMAL(FORMAL
Neighbor cell
), FORMAL~0,
Classification Enumeration Type None
EXTENDED(EXTE EXTENDED~1
Management
NDED)

AUTO_MODE(Auto
Automatic
Mode), AUTO_MODE~0,
Neighbour Relation Enumeration Type None
MANUAL_MODE(M MANUAL_MODE~1
(ANR)
anual Mode)
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Interval Type 0~503 N/A None
Handover
Cell Selection and
Reselection / Cell
Selection and Re-
selection

RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
0~46589,54436~65
Handover Interval Type N/A None
535
Distance Based
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD

RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based String Type 3 characters N/A None
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based String Type 2~3 characters N/A None
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
Hybrid RAN
Sharing

None Interval Type 0~1048575 N/A None

Coverage Based
Intra-frequency
Handover
Interval Type 0~255 N/A None
Coverage Based
Inter-frequency
Handover

RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
0~46589,54436~65
Distance Based Interval Type N/A None
535
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
Hybrid RAN
Sharing

Coverage Based
Intra-frequency
NOT_CFG(Not
Handover NOT_CFG~0,
Enumeration Type configure), None
Coverage Based CFG~1
CFG(Configure)
Inter-frequency
Handover
RAN Sharing with
Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
18000~46589,5443
Distance Based Interval Type N/A None
6~65535
Inter-frequency
Handover
Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
Hybrid RAN
Sharing

Coverage Based
Intra-frequency
Handover
Coverage Based
Interval Type 0~503 N/A None
Inter-frequency
Handover
Cell Selection and
Reselection

Coverage Based
Intra-frequency
Handover
Interval Type 0~65535 N/A None
Coverage Based
Inter-frequency
Handover
Coverage Based
Intra-frequency
Handover
String Type 0~99 characters N/A None
Coverage Based
Inter-frequency
Handover
Multi-Band
Compatibility MultiBand[] 0~2 N/A None
Enhancement

None Interval Type 1~64 N/A None

Camp Enumeration Type NO(No), YES(Yes) NO~0, YES~1 None
 NONE(NONE),
Dedicated Service NONE~0,
Enumeration Type SPECSERCELL(SP None
Carrier SPECSERCELL~1
ECSERCELL)
 AUTO_MODE(Auto
Automatic
Mode), AUTO_MODE~0,
Neighbour Relation Enumeration Type None
MANUAL_MODE(M MANUAL_MODE~1
(ANR)
anual Mode)

None Interval Type 0~255 N/A None

 bc0~0, bc1~1,
CS Fallback to bc2~2, bc3~3,
CDMA2000 1xRTT bc0, bc1, bc2, bc3, bc4~4, bc5~5,
PS Inter-RAT bc4, bc5, bc6, bc7, bc6~6, bc7~7,
Mobility between E- bc8, bc9, bc10, bc8~8, bc9~9,
UTRAN and Enumeration Type bc11, bc12, bc13, bc10~10, bc11~11, None
CDMA2000 bc14, bc15, bc16, bc12~12, bc13~13,
MOCN Flexible bc17, bc18, bc19, bc14~14, bc15~15,
Priority Based bc20, bc21 bc16~16, bc17~17,
Camping bc18~18, bc19~19,
bc20~20, bc21~21

CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and Interval Type 0~5 N/A None
CDMA2000
MOCN Flexible
Priority Based
Camping

CS Fallback to
CDMA2000 1xRTT
NOT_CFG(Not
S1-flex NOT_CFG~0,
Enumeration Type configure), None
MOCN Flexible CFG~1
CFG(Configure)
Priority Based
Camping
CS Fallback to
CDMA2000 1xRTT
S1-flex
Interval Type 0~7 N/A None
MOCN Flexible
Priority Based
Camping

PS Inter-RAT
Mobility between E-
UTRAN and NOT_CFG(Not
NOT_CFG~0,
CDMA2000 Enumeration Type configure), None
CFG~1
MOCN Flexible CFG(Configure)
Priority Based
Camping
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000 Interval Type 0~7 N/A None
MOCN Flexible
Priority Based
Camping

None Interval Type 0~255 N/A None

RAN Sharing with
Common Carrier
MOCN Flexible
0~46589,54436~65
Priority Based Interval Type N/A None
535
Camping
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
MOCN Flexible
Priority Based String Type 3 characters N/A None
Camping
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
MOCN Flexible
Priority Based String Type 2~3 characters N/A None
Camping
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
Cell Selection and
Re-selection NOT_CFG(Not
NOT_CFG~0,
MOCN Flexible Enumeration Type configure), None
CFG~1
Priority Based CFG(Configure)
Camping
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
Cell Selection and
Re-selection
MOCN Flexible Interval Type 0~7 N/A None
Priority Based
Camping
Hybrid RAN
Sharing

None Interval Type 0~255 N/A None

MOCN Flexible
0~46589,54436~65
Priority Based Interval Type N/A None
535
Camping

MOCN Flexible
Priority Based Interval Type 0~5 N/A None
Camping

MOCN Flexible
Priority Based NOT_CFG(Not
NOT_CFG~0,
Camping Enumeration Type configure), None
CFG~1
Cell Selection and CFG(Configure)
Re-selection
MOCN Flexible
Priority Based
Camping Interval Type 0~7 N/A None
Cell Selection and
Re-selection

None Interval Type 0~255 N/A None

MOCN Flexible
Priority Based Interval Type 0~31 N/A None
Camping

MOCN Flexible
Priority Based Interval Type 0~5 N/A None
Camping

MOCN Flexible
Priority Based NOT_CFG(Not
NOT_CFG~0,
Camping Enumeration Type configure), None
CFG~1
Cell Selection and CFG(Configure)
Re-selection
MOCN Flexible
Priority Based
Camping Interval Type 0~7 N/A None
Cell Selection and
Re-selection

None Interval Type 0~255 N/A None

RAN Sharing with

Common Carrier
MOCN Flexible
Priority Based Interval Type 0~31 N/A None
Camping
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
MOCN Flexible
Priority Based String Type 3 characters N/A None
Camping
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
MOCN Flexible
Priority Based String Type 2~3 characters N/A None
Camping
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
Cell Selection and
Re-selection NOT_CFG(Not
NOT_CFG~0,
MOCN Flexible Enumeration Type configure), None
CFG~1
Priority Based CFG(Configure)
Camping
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
Cell Selection and
Re-selection
MOCN Flexible Interval Type 0~7 N/A None
Priority Based
Camping
Hybrid RAN
Sharing

None Interval Type 0~255 N/A None

PS Inter-RAT
Mobility between E-
String Type 3 characters N/A None
UTRAN and
UTRAN

PS Inter-RAT
Mobility between E-
String Type 2~3 characters N/A None
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
Interval Type 0~65535 N/A None
UTRAN
Flash CS Fallback
to UTRAN
Flash CS Fallback
to UTRAN
PS Inter-RAT
Interval Type 0~65535 N/A None
Mobility between E-
UTRAN and
UTRAN

PS Inter-RAT PERMIT_HO_ENU PERMIT_HO_ENU

Mobility between E- M(Permit Ho), M~0,
Enumeration Type None
UTRAN and FORBID_HO_ENU FORBID_HO_ENU
UTRAN M(Forbid Ho) M~1

PERMIT_RMV_EN
UM(Permit ANR PERMIT_RMV_EN
Remove), UM~0,
Inter-RAT ANR Enumeration Type None
FORBID_RMV_EN FORBID_RMV_EN
UM(Forbid ANR UM~1
Remove)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
Inter-RAT ANR Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN
PS Inter-RAT
Mobility between E-
Interval Type 0~32 N/A None
UTRAN and
UTRAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
steering
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN
PS Inter-RAT LOW_PRIORITY(L
LOW_PRIORITY~0
Mobility between E- ow Priority),
Enumeration Type , None
UTRAN and HIGH_PRIORITY(H
HIGH_PRIORITY~1
UTRAN igh Priority)
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
steering
Inter-RAT Load
Sharing to UTRAN
Multi-RAT Carrier Enumeration Type NO(NO), YES(YES) NO~0, YES~1 None
Joint Intelligent
Shutdown(eNodeB)
Inter-RAT ANR
SRVCC to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN
PS Inter-RAT
Mobility between E-
Interval Type 0~128 N/A None
UTRAN and
UTRAN
Service based inter-
RAT handover to
UTRAN
Distance based
inter-RAT handover
to UTRAN
PS Inter-RAT
Mobility between E-
String Type 0~99 characters N/A None
UTRAN and
UTRAN

PS Inter-RAT
Mobility between E-
String Type 0~99 characters N/A None
UTRAN and
UTRAN
 AUTO_MODE(Auto
Mode), AUTO_MODE~0,
Inter-RAT ANR Enumeration Type None
MANUAL_MODE(M MANUAL_MODE~1
anual Mode)

None Interval Type 0~1048575 N/A None

None String Type 0~32 characters N/A None

None String Type 0~32 characters N/A None

None String Type 0~32 characters N/A None

None String Type 0~32 characters N/A None

Normal~0,
Normal, Overload,
Overload~1,
None Enumeration Type Congestion, None
Congestion~2,
Midload
Midload~3

None Interval Type 0~255 N/A None

MOCN Flexible
Priority Based Interval Type 0~16383 N/A None
Camping
MOCN Flexible
Priority Based Interval Type 0~5 N/A None
Camping

MOCN Flexible
Priority Based NOT_CFG(Not
NOT_CFG~0,
Camping Enumeration Type configure), None
CFG~1
Cell Selection and CFG(Configure)
Re-selection

MOCN Flexible
Priority Based
Camping Interval Type 0~7 N/A None
Cell Selection and
Re-selection
None Interval Type 0~255 N/A None

RAN Sharing with

Common Carrier
MOCN Flexible
Priority Based Interval Type 0~16383 N/A None
Camping
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
MOCN Flexible
Priority Based String Type 3 characters N/A None
Camping
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
MOCN Flexible
Priority Based String Type 2~3 characters N/A None
Camping
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
Cell Selection and
Re-selection NOT_CFG(Not
NOT_CFG~0,
MOCN Flexible Enumeration Type configure), None
CFG~1
Priority Based CFG(Configure)
Camping
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
Cell Selection and
Re-selection
MOCN Flexible Interval Type 0~7 N/A None
Priority Based
Camping
Hybrid RAN
Sharing

None Interval Type 0~255 N/A None

Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN Interval Type 0~16383 N/A None
Broadcast of
system information
E-UTRAN to
UTRAN CS/PS
steering

Cell Selection and

Re-selection
R99, HSDPA, R99~0, HSDPA~1,
E-UTRAN to Enumeration Type None
HSUPA, HSPA HSUPA~2, HSPA~3
UTRAN CS/PS
steering
PS Inter-RAT
Mobility between E-
UTRAN_FDD, UTRAN_FDD~0,
UTRAN and Enumeration Type None
UTRAN_TDD UTRAN_TDD~1
UTRAN
Inter-RAT ANR
Cell Selection and
Re-selection
PS Inter-RAT
Mobility between E- NOT_CFG(Not
NOT_CFG~0,
UTRAN and Enumeration Type configure), None
CFG~1
UTRAN CFG(Configure)
E-UTRAN to
UTRAN CS/PS
steering
Cell Selection and
Re-selection
PS Inter-RAT
Interval Type 0~16383 N/A None
Mobility between E-
UTRAN and
UTRAN

Cell Selection and

NOT_CFG(Not
Reselection / Cell NOT_CFG~0,
Enumeration Type configure), None
Selection and Re- CFG~1
CFG(Configure)
selection
Cell Selection and
Re-selection
Broadcast of Interval Type 0~7 N/A None
system information
S1-flex

Cell Selection and

Interval Type -50~33 N/A dBm
Reselection
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN Interval Type -15~15 N/A dB
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN

Cell Selection and

Reselection / Cell
Interval Type -24~0 N/A dB
Selection and Re-
selection
Cell Selection and
Reselection / Cell
Interval Type -60~-13 N/A 2dBm
Selection and Re-
selection
Cell Selection and
Interval Type 0~31 N/A 2dB
Reselection
Cell Selection and
Interval Type 0~31 N/A 2dB
Reselection
Cell Selection and
Reselection / Cell
Interval Type 0~31 N/A dB
Selection and Re-
selection
Cell Selection and
Reselection / Cell
Interval Type 0~31 N/A dB
Selection and Re-
selection
 Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
Priority_0~0,
4),
Priority_1~1,
Priority_5(Priority
Priority_2~2,
5),
Priority_3~3,
Priority_6(Priority
Priority_4~4,
6),
PS Inter-RAT Priority_5~5,
Priority_7(Priority
Mobility between E- Priority_6~6,
7),
UTRAN and Priority_7~7,
Priority_8(Priority
UTRAN Enumeration Type Priority_8~8, None
8),
E-UTRAN to Priority_9~9,
Priority_9(Priority
UTRAN CS/PS Priority_10~10,
9),
steering Priority_11~11,
Priority_10(Priority
Priority_12~12,
10),
Priority_13~13,
Priority_11(Priority
Priority_14~14,
11),
Priority_15~15,
Priority_12(Priority
Priority_16~16
12),
Priority_13(Priority
13),
Priority_14(Priority
14),
Priority_15(Priority
15),
Priority_16(Priority
16)
 Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
Priority_0~0,
4),
Priority_1~1,
Priority_5(Priority
Priority_2~2,
5),
Priority_3~3,
Priority_6(Priority
E-UTRAN to Priority_4~4,
6),
UTRAN CS/PS Priority_5~5,
Priority_7(Priority
Steering Priority_6~6,
7),
CS Fallback to Priority_7~7,
Priority_8(Priority
UTRAN Enumeration Type Priority_8~8, None
8),
Flash CS Fallback Priority_9~9,
Priority_9(Priority
to UTRAN Priority_10~10,
9),
CS Fallback Priority_11~11,
Priority_10(Priority
Steering to UTRAN Priority_12~12,
10),
Priority_13~13,
Priority_11(Priority
Priority_14~14,
11),
Priority_15~15,
Priority_12(Priority
Priority_16~16
12),
Priority_13(Priority
13),
Priority_14(Priority
14),
Priority_15(Priority
15),
Priority_16(Priority
16)
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
Cell Selection and
Re-selection
SRVCC to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
Interval Type 0~8 N/A None
to UTRAN
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
steering
 Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
Priority_0~0,
4),
Priority_1~1,
Priority_5(Priority
CS Fallback Priority_2~2,
5),
Steering to UTRAN Priority_3~3,
Priority_6(Priority
PS Inter-RAT Priority_4~4,
6),
Mobility between E- Priority_5~5,
Priority_7(Priority
UTRAN and Priority_6~6,
7),
UTRAN Priority_7~7,
Priority_8(Priority
CS Fallback to Enumeration Type Priority_8~8, None
8),
UTRAN Priority_9~9,
Priority_9(Priority
Flash CS Fallback Priority_10~10,
9),
to UTRAN Priority_11~11,
Priority_10(Priority
E-UTRAN to Priority_12~12,
10),
UTRAN CS/PS Priority_13~13,
Priority_11(Priority
steering Priority_14~14,
11),
Priority_15~15,
Priority_12(Priority
Priority_16~16
12),
Priority_13(Priority
13),
Priority_14(Priority
14),
Priority_15(Priority
15),
Priority_16(Priority
16)
 NON_CONTINUOU
S(NON_CONTINU NON_CONTINUOU
None Enumeration Type OUS), S~0, None
CONTINUOUS(CO CONTINUOUS~1
NTINUOUS)

Intra-LTE Load
Interval Type 0~7 N/A None
Balancing
Multi-Band
FALSE(False),
Compatibility Enumeration Type FALSE~0, TRUE~1 None
TRUE(True)
Enhancement
 BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
Inter-RAT ANR Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

NOT_ALLOWED(N
OT_ALLOWED), NOT_ALLOWED~0
Inter-RAT ANR Enumeration Type None
ALLOWED(ALLOW , ALLOWED~1
ED)
 Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
Priority_0~0,
4),
Priority_1~1,
Priority_5(Priority
Priority_2~2,
5),
Priority_3~3,
Priority_6(Priority
Priority_4~4,
6),
Priority_5~5,
Priority_7(Priority
Priority_6~6,
7),
Priority_7~7,
SRVCC Flexible Priority_8(Priority
Enumeration Type Priority_8~8, None
Steering to UTRAN 8),
Priority_9~9,
Priority_9(Priority
Priority_10~10,
9),
Priority_11~11,
Priority_10(Priority
Priority_12~12,
10),
Priority_13~13,
Priority_11(Priority
Priority_14~14,
11),
Priority_15~15,
Priority_12(Priority
Priority_16~16
12),
Priority_13(Priority
13),
Priority_14(Priority
14),
Priority_15(Priority
15),
Priority_16(Priority
16)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
None Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
Inter-RAT ANR Interval Type 0~31 N/A None

PS Inter-RAT
Mobility between E-
String Type 3 characters N/A None
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
String Type 2~3 characters N/A None
UTRAN and
UTRAN

Flash CS Fallback
Interval Type 0~65535 N/A None
to UTRAN
PS Inter-RAT
Mobility between E-
Interval Type 0~65535 N/A None
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
Interval Type 0~16383 N/A None
UTRAN and
UTRAN
PS Inter-RAT
NOT_CFG(Not
Mobility between E- NOT_CFG~0,
Enumeration Type configure), None
UTRAN and CFG~1
CFG(Configure)
UTRAN
None Interval Type 0~16383 N/A None

PS Inter-RAT
Mobility between E- UTRAN_FDD, UTRAN_FDD~0,
Enumeration Type None
UTRAN and UTRAN_TDD UTRAN_TDD~1
UTRAN
PS Inter-RAT
NOT_CFG(Not
Mobility between E- NOT_CFG~0,
Enumeration Type configure), None
UTRAN and CFG~1
CFG(Configure)
UTRAN

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
CS Fallback to
GERAN
Flash CS Fallback
to UTRAN
CS Fallback to
UTRAN Interval Type 0~255 N/A None
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
steering

PS Inter-RAT
Mobility between E-
Interval Type 0~511 N/A None
UTRAN and
UTRAN

SRVCC to UTRAN
CS Fallback with
LAI to UTRAN
Interval Type 1~65533,65535 N/A None
E-UTRAN to
UTRAN CS/PS
steering
PS Inter-RAT
Mobility between E-
String Type 0~99 characters N/A None
UTRAN and
UTRAN

SRVCC to UTRAN
PS Inter-RAT
Mobility between E- BOOLEAN_FALSE( BOOLEAN_FALSE
UTRAN and False), ~0,
Enumeration Type None
UTRAN BOOLEAN_TRUE( BOOLEAN_TRUE~
E-UTRAN to True) 1
UTRAN CS/PS
steering
Multi-Band
Compatibility MultiBand[] 0~2 N/A None
Enhancement

None Interval Type 1~64 N/A None

Camp Enumeration Type NO(No), YES(Yes) NO~0, YES~1 None
 AUTO_MODE(Auto
Mode), AUTO_MODE~0,
Inter-RAT ANR Enumeration Type None
MANUAL_MODE(M MANUAL_MODE~1
anual Mode)

None Interval Type 0~5 N/A None

None Interval Type 0~23 N/A None
 LOAD_BALANCE_
MODE_UNAVAILA
BLE(Load
Balancing Mode LOAD_BALANCE_
Unavailable), MODE_UNAVAILA
LOAD_BALANCE_ BLE~0,
MODE_OPEN(Load LOAD_BALANCE_
Balancing Mode MODE_OPEN~1,
None Enumeration Type Enabled), LOAD_BALANCE_ None
LOAD_BALANCE_ MODE_CLOSED~2
MODE_CLOSED(L ,
oad Balancing LOAD_BALANCE_
Mode Disabled), MODE_BLOCKED~
LOAD_BALANCE_ 3
MODE_BLOCKED(
Load Balancing
Mode Blocked)
 BBP_CATEGORY_
NOT_SUPPORTED
(BBP Category Not
Supported),
BBP_STATUS_AB BBP_CATEGORY_
NORMAL(BBP NOT_SUPPORTED
Status Abnormal), ~0,
WORK_MODE_NO BBP_STATUS_AB
T_SUPPORTED(W NORMAL~1,
ork Mode Not WORK_MODE_NO
Supported), T_SUPPORTED~2,
None Enumeration Type SWITCH_OFF(Swit SWITCH_OFF~3, None
ch Off), INTER_BOARD_D
INTER_BOARD_D ATA_LINK_EXCEP
ATA_LINK_EXCEP TION~4,
TION(Inter-Board BBP_STATUS_BLO
Data Link CKED~5,
Exception), NULL~254,
BBP_STATUS_BLO UNKNOWN~255
CKED(BBP Status
Blocked), NULL,
UNKNOWN(Unkno
wn Reasons)
 NULL,
PRIMARY_BBP_W NULL~0,
ORK_TYPE(Primar PRIMARY_BBP_W
None Enumeration Type y BBP), ORK_TYPE~1, None
SECONDARY_BBP SECONDARY_BBP
_WORK_TYPE(Sec _WORK_TYPE~2
ondary BBP)

None Interval Type 0~7 N/A None

None Interval Type 0~1 N/A None

None Interval Type 0~5 N/A None

None Interval Type 1~1440 N/A min
None Interval Type 0~100 N/A %
None Interval Type 0~100 N/A %
 UNBLOCK(Unblock
),
HIGH_PRIORITY_ UNBLOCK~0,
BLOCK(High HIGH_PRIORITY_
Priority Block), BLOCK~1,
None Enumeration Type MIDDLE_PRIORIT MIDDLE_PRIORIT None
Y_BLOCK(Middle Y_BLOCK~2,
Priority Block), LOW_PRIORITY_B
LOW_PRIORITY_B LOCK~3
LOCK(Low Priority
Block)

Cell Outage
Detection and Interval Type 0~4320 N/A min
Compensation
None Bit Field Type S1(S1), X2(X2) S1~0, X2~1 None
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
configuration type 7
Optional uplink-
downlink subframe
configuration
uplink-downlink 0~261120,275943~
Interval Type N/A Ts
subframe 307200
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5
FDD and TDD
Carrier
Aggregation(TDD)
FDD and TDD
Carrier
Aggregation(FDD)

FDD and TDD

Carrier
Aggregation(TDD) 0~261120,275943~
Interval Type N/A Ts
FDD and TDD 307200
Carrier
Aggregation(FDD)
None Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None
 ADAPTIVE(ADAPTI
VE), ADAPTIVE~0,
RESOURCE_PRIM RESOURCE_PRIM
None Enumeration Type ARY(RESOURCE_ ARY~1, None
PRIMARY), LOAD_BALANCE~
LOAD_BALANCE(L 2
OAD_BALANCE)
 ADAPTIVE(ADAPTI
VE), ADAPTIVE~0,
RESOURCE_PRIM RESOURCE_PRIM
None Enumeration Type ARY(RESOURCE_ ARY~1, None
PRIMARY), LOAD_BALANCE~
LOAD_BALANCE(L 2
OAD_BALANCE)

None Interval Type 0~65535 N/A min

Auto Neighbor
Group Compound Type 00:00:00~23:59:59 N/A None
Configuration

None Interval Type 0~23,255 N/A None

 COORDINATED_S
CHEDULING_ONL
Y(COORDINATED_ COORDINATED_S
SCHEDULING_ON CHEDULING_ONL
LY), Y~0,
None Enumeration Type None
COORDINATED_S COORDINATED_S
CHEDULING_MIXI CHEDULING_MIXI
NG(COORDINATE NG~1
D_SCHEDULING_
MIXING)

Inter-eNodeB DL
CoMP based on Interval Type 3~20 N/A ms
Relaxed backhaul
Inter-eNodeB DL
CoMP based on Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Relaxed backhaul

Inter-eNodeB DL
CoMP based on Interval Type 1~25 N/A None
Relaxed backhaul

FIX_MODE(Fixed
Inter-eNodeB DL
Mode), FIX_MODE~0,
CoMP based on Enumeration Type None
ADP_MODE(Adapt ADP_MODE~1
Relaxed backhaul
Mode)
Inter-eNodeB
Coordinated Uplink Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
AMC
 NORMAL(Normal
Mode), NORMAL~0,
None Enumeration Type LBBP_LARGE_CA LBBP_LARGE_CA None
PACITY(Large PACITY~1
Mode)
 NORMAL(NORMAL
), NORMAL~0,
None Enumeration Type LARGECAPABILIT LARGECAPABILIT None
Y(LARGECAPABILI Y~1
TY)
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

Automatic
Congestion
Handling
Interval Type 0~65535 N/A None
Automatic
Congestion
Handling(TDD)

Automatic
Congestion
Handling Cell(Cell),
Enumeration Type Cell~0, eNodeB~1 None
Automatic eNodeB(eNodeB)
Congestion
Handling(TDD)
 BIGGERTHAN(BIG
GERTHAN),
EQUALTO(EQUALT
O),
BIGGERTHAN~0,
SMALLERTHAN(S
Automatic EQUALTO~1,
MALLERTHAN),
Congestion SMALLERTHAN~2,
SMALLERTHANOR
Handling SMALLERTHANOR
Enumeration Type EQUALTO(SMALL None
Automatic EQUALTO~3,
ERTHANOREQUAL
Congestion BIGGERTHANORE
TO),
Handling(TDD) QUALTO~4,
BIGGERTHANORE
NOTEQUALTO~5
QUALTO(BIGGERT
HANOREQUALTO),
NOTEQUALTO(NO
TEQUALTO)

Automatic
Congestion
-
Handling
Interval Type 2147483647~2147 N/A None
Automatic
483647
Congestion
Handling(TDD)
 USER_SPEC_OCC
UPY_RATE(USER_
SPEC_OCCUPY_R
ATE),
UL_PRB_UTILIZAT
ION_RATE(UL_PR USER_SPEC_OCC
B_UTILIZATION_R UPY_RATE~0,
ATE), UL_PRB_UTILIZAT
Automatic
DL_PRB_UTILIZAT ION_RATE~1,
Congestion
ION_RATE(DL_PR DL_PRB_UTILIZAT
Handling
Enumeration Type B_UTILIZATION_R ION_RATE~2, None
Automatic
ATE), PDCCH_CCE_UTIL
Congestion
PDCCH_CCE_UTIL IZATION_RATE~3,
Handling(TDD)
IZATION_RATE(PD ENB_USER_SPEC
CCH_CCE_UTILIZ _EQU_OCCUPY_R
ATION_RATE), ATE~4
ENB_USER_SPEC
_EQU_OCCUPY_R
ATE(ENB_USER_S
PEC_EQU_OCCUP
Y_RATE)

Automatic
Congestion
Handling
Interval Type 0~65535 N/A None
Automatic
Congestion
Handling(TDD)
Automatic
Congestion
Handling
String Type 0~64 characters N/A None
Automatic
Congestion
Handling(TDD)
Automatic
Congestion
Handling
Interval Type 0~65535 N/A None
Automatic
Congestion
Handling(TDD)
Automatic
Congestion
Handling
String Type 0~64 characters N/A None
Automatic
Congestion
Handling(TDD)

Automatic
Congestion
Handling
Interval Type 0~65535 N/A None
Automatic
Congestion
Handling(TDD)

Automatic
Congestion
Handling Cell(Cell),
Enumeration Type Cell~0, eNodeB~1 None
Automatic eNodeB(eNodeB)
Congestion
Handling(TDD)
Automatic
Congestion
Handling
Interval Type 0~255 N/A None
Automatic
Congestion
Handling(TDD)

Automatic
Congestion
Handling NORMAL(Normal), NORMAL~0,
Enumeration Type None
Automatic PENALTY(Penalty) PENALTY~1
Congestion
Handling(TDD)

Automatic
Congestion
Handling
Interval Type 0~65535 N/A None
Automatic
Congestion
Handling(TDD)
Automatic
Congestion Handler
Automatic Interval Type 0~255 N/A None
Congestion
Handler(TDD)

Automatic
Congestion
MODIFY(MODIFY),
Handling MODIFY~0,
Enumeration Type RESUME(RESUME None
Automatic RESUME~1
)
Congestion
Handling(TDD)
Automatic
Congestion
Handling AND(AND),
Enumeration Type AND~0, OR~1 None
Automatic OR(OR)
Congestion
Handling(TDD)

Automatic
Congestion
Handling
Interval Type 0~65535 N/A s
Automatic
Congestion
Handling(TDD)

Automatic
Congestion
Handling
String Type 1~500 characters N/A None
Automatic
Congestion
Handling(TDD)
Automatic
Congestion
Handling
Interval Type 0~65535 N/A None
Automatic
Congestion
Handling(TDD)

Automatic
Congestion
Handling
Interval Type 0~65535 N/A s
Automatic
Congestion
Handling(TDD)
Automatic
Congestion
BOTH(BOTH),
Handling BOTH~0, FDD~1,
Enumeration Type FDD(FDD), None
Automatic TDD~2
TDD(TDD)
Congestion
Handling(TDD)

Automatic
Congestion ACTIVATED(ACTIV
Handling ATED), ACTIVATED~0,
Enumeration Type None
Automatic DEACTIVATED(DE DEACTIVATED~1
Congestion ACTIVATED)
Handling(TDD)
 UN-
Automatic
EXECUTED(UN-
Congestion
EXECUTED), UN-EXECUTED~0,
Handling
Enumeration Type EXECUTING(EXEC EXECUTING~1, None
Automatic
UTING), EXECUTED~2
Congestion
EXECUTED(EXEC
Handling(TDD)
UTED)

Automatic
Congestion
Handling
Interval Type 0~65535 N/A None
Automatic
Congestion
Handling(TDD)

Automatic
Congestion
Handling
Interval Type 0~65535 N/A None
Automatic
Congestion
Handling(TDD)
Automatic
Congestion ACTIVATED(ACTIV
Handling ATED), ACTIVATED~0,
Enumeration Type None
Automatic DEACTIVATED(DE DEACTIVATED~1
Congestion ACTIVATED)
Handling(TDD)

None String Type 3 characters N/A None

None String Type 2~3 characters N/A None

EUTRAN(EUTRAN) EUTRAN~0,
None Enumeration Type , UTRAN(UTRAN), UTRAN~1, None
GERAN(GERAN) GERAN~2
 BLACK_LIST(BLAC
K_LIST),
BLACK_LIST~0,
GREY_LIST(GREY
None Enumeration Type GREY_LIST~1, None
_LIST),
WHITE_LIST~2
WHITE_LIST(WHIT
E_LIST)

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation 0~46589,54436~65
Interval Type N/A None
for Downlink 2CC in 535
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
Interval Type 0~7 N/A None
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
Interval Type -140~-43 N/A dBm
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
Interval Type -40~-6 N/A 0.5dB
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

None Interval Type 0~35 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

DISABLE(Disable), DISABLE~0,
None Enumeration Type None
ENABLE(Enable) ENABLE~1

DISABLE(Disable), DISABLE~0,
None Enumeration Type None
ENABLE(Enable) ENABLE~1

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation 0~46589,54436~65
Interval Type N/A None
for Downlink 2CC in 535
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation 0~46589,54436~65
Interval Type N/A None
for Downlink 2CC in 535
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
Interval Type 1~7 N/A None
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
Interval Type -31~66 N/A dBm
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
Interval Type -35~62 N/A dBm
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

Auto Neighbor
Group Interval Type 0~100 N/A %
Configuration
Auto Neighbor
Group Interval Type 0~100 N/A %
Configuration
Auto Neighbor
AUTO(Auto), AUTO~0,
Group Enumeration Type None
MANUAL(Manual) MANUAL~1
Configuration

Camp & Handover

Based on SPID
UL Pre-allocation
Based on SPID
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
CA for Downlink
2CC From Multiple Interval Type 0~255,65535 N/A None
Carriers
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Inter-eNodeB CA
Based on
Coordinated BBU
FDD+TDD Carrier
Aggregation
Busy-Hour
Download Rate
Control and Video Interval Type 0~100 N/A None
Service Rate
Adaption

Busy-Hour
Download Rate
Control and Video Interval Type 0~100 N/A None
Service Rate
Adaption

Busy-Hour
Download Rate
Control and Video Interval Type 0~100 N/A None
Service Rate
Adaption

Busy-Hour
Download Rate
Control and Video Interval Type 0~100 N/A None
Service Rate
Adaption

Busy-Hour
Download Rate
Control and Video Interval Type 0~100 N/A None
Service Rate
Adaption

Busy-Hour
Download Rate
Control and Video Interval Type 0~100 N/A None
Service Rate
Adaption

Busy-Hour
Download Rate
Control and Video Interval Type 0~100 N/A None
Service Rate
Adaption

Busy-Hour
Download Rate
Control and Video Interval Type 0~100 N/A None
Service Rate
Adaption
Automatic
Neighbour Relation Interval Type 0~100 N/A %
(ANR)

Automatic
Neighbour Relation Interval Type 1~10000 N/A None
(ANR)
Automatic
Neighbour Relation Interval Type 1~10080 N/A min
(ANR)

Automatic r1(1), r2(2), r4(4),

r1~0, r2~1, r4~2,
Neighbour Relation r8(8), r16(16),
Enumeration Type r8~3, r16~4, r32~5, None
(ANR) r32(32), r64(64),
r64~6, Infinity~7
Inter-RAT ANR Infinity(Infinity)

120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3,
Automatic 480ms, 640ms, 1024ms~4,
Neighbour Relation 1024ms, 2048ms, 2048ms~5,
Enumeration Type None
(ANR) 5120ms, 10240ms, 5120ms~6,
Inter-RAT ANR 1min, 6min, 12min, 10240ms~7,
30min, 60min 1min~8, 6min~9,
12min~10,
30min~11,
60min~12
Automatic
Neighbour Relation
Interval Type 1~10080 N/A min
(ANR)
Inter-RAT ANR

Automatic
Neighbour Relation Interval Type -130~-70 N/A dBm
(ANR)

Automatic
Neighbour Relation Interval Type 1~200 N/A None
(ANR)
Inter-RAT ANR Interval Type 1~200 N/A None

Automatic
Neighbour Relation Interval Type 1~10000 N/A None
(ANR)

Inter-RAT ANR Interval Type 1~10000 N/A None

Automatic
FREE(FREE),
Neighbour Relation FREE~0,
Enumeration Type CONTROLLED(CO None
(ANR) CONTROLLED~1
NTROLLED)
Inter-RAT ANR
Automatic
Neighbour Relation
Interval Type 1~50400 N/A min
(ANR)
Inter-RAT ANR
Automatic
Neighbour Relation
Interval Type 1~10000 N/A None
(ANR)
Inter-RAT ANR
PCI Collision
Detection & Self- Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Optimization

PCI Collision
Detection & Self- Compound Type 00:00:00~23:59:59 N/A None
Optimization
PCI Collision
Detection & Self- Compound Type 00:00:00~23:59:59 N/A None
Optimization

Inter-RAT ANR Interval Type -120~-25 N/A dBm

Inter-RAT ANR Interval Type -110~-48 N/A dBm

Inter-RAT ANR Interval Type -63~0 N/A 0.5dB

Inter-RAT ANR Interval Type -63~0 N/A 0.5dB

Automatic
Neighbour Relation Interval Type 0~100 N/A %
(ANR)
Automatic
Neighbour Relation Interval Type 0~10000 N/A None
(ANR)
 NCL_MODE(NCL
Mode),
Automatic
NCL_NRT_MODE( NCL_MODE~0,
Neighbour Relation
Enumeration Type NCL and NRT NCL_NRT_MODE~ None
(ANR)
Mode), 1, NRT_MODE~2
Inter-RAT ANR
NRT_MODE(NRT_
MODE)
 BASED_NCL(BASE
Automatic BASED_NCL~0,
D_NCL),
Neighbour Relation Enumeration Type NOT_BASED_NCL None
NOT_BASED_NCL(
(ANR) ~1
NOT_BASED_NCL)
 CA_UE_CAP(CA
UE Capability),
CA_UE_CAP~0,
Automatic CA_UE_CARRIER_
CA_UE_CARRIER_
Neighbour Relation Enumeration Type NUM(CA UE Carrier None
NUM~1,
(ANR) Number),
ANR_UE_CAP~2
ANR_UE_CAP(AN
R UE Capability)
SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E- PERMIT_HO(PER
UTRAN and MIT_HO), PERMIT_HO~0,
Enumeration Type None
GERAN FORBID_HO(FORB FORBID_HO~1
PS Inter-RAT ID_HO)
Mobility between E-
UTRAN and
CDMA2000
Intra-LTE Load
Balancing
Inter-RAT Load
Sharing to UTRAN
Inter-RAT Load
Sharing to GERAN
Automatic
Neighbour Relation
(ANR)
Inter-RAT ANR
Automatic
DISABLE~0,
Neighbour Relation Enumeration Type DISABLE, ENABLE None
ENABLE~1
(ANR);
 NO_CHECK(NO_C
Automatic
HECK), NO_CHECK~0,
Neighbour Relation Enumeration Type None
PCI_CHECK(PCI_ PCI_CHECK~1
(ANR)
CHECK)
 BASED_NCL(BASE
BASED_NCL~0,
D_NCL),
Inter-RAT ANR Enumeration Type NOT_BASED_NCL None
NOT_BASED_NCL(
~1
NOT_BASED_NCL)
 BASED_NCL(BASE
BASED_NCL~0,
D_NCL),
Inter-RAT ANR Enumeration Type NOT_BASED_NCL None
NOT_BASED_NCL(
~1
NOT_BASED_NCL)
 UTRAN_EVENT_A UTRAN_EVENT_A
NR_WITH_VOIP_M NR_WITH_VOIP_M
ODE, ODE~0,
GERAN_EVENT_A GERAN_EVENT_A
Inter-RAT ANR Bit Field Type NR_WITH_VOIP_M NR_WITH_VOIP_M None
ODE, ODE~1,
CDMA_EVENT_AN CDMA_EVENT_AN
R_WITH_VOIP_MO R_WITH_VOIP_MO
DE DE~2
Inter-RAT ANR Interval Type 2~16 N/A 0.5s

Inter-RAT ANR Interval Type 2~16 N/A 0.5s

 EUTRAN_DELRED
UNDANCENCELL(
EUTRAN_DELRED
UNDANCENCELL),
UTRAN_DELREDU
NDANCENCELL(U
TRAN_DELREDUN
DANCENCELL), EUTRAN_DELRED
GERAN_DELREDU UNDANCENCELL~
NDANCENCELL(G 0,
ERAN_DELREDUN UTRAN_DELREDU
DANCENCELL), NDANCENCELL~1,
UTRAN_DELERRO GERAN_DELREDU
RNCELL(UTRAN_ NDANCENCELL~2,
DELERRORNCELL UTRAN_DELERRO
Automatic
), RNCELL~3,
Neighbour Relation
Bit Field Type GERAN_DELERRO GERAN_DELERRO None
(ANR)
RNCELL(GERAN_ RNCELL~4,
Inter-RAT ANR
DELERRORNCELL EUTRAN_DELCEL
), LERRORNCELL~5,
EUTRAN_DELCEL MLB_DELNCELCT
LERRORNCELL(E RL~6,
UTRAN_DELCELL CA_DELNCELCTR
ERRORNCELL), L~7,
MLB_DELNCELCT BLINDHO_DELNC
RL(MLB_DELNCEL ELCTRL~8
CTRL),
CA_DELNCELCTR
L(CA_DELNCELCT
RL),
BLINDHO_DELNC
ELCTRL(BLINDHO
_DELNCELCTRL)
 EutranCtrlOptMode(
EUTRANCtrlOptMo
EutranCtrlOptMode
de),
Automatic ~0,
UtranCtrlOptMode(
Neighbour Relation UtranCtrlOptMode~
Bit Field Type UTRANCtrlOptMod None
(ANR), 1,
e),
Inter-RAT ANR GeranCtrlOptMode
GeranCtrlOptMode(
~2
GERANCtrlOptMod
e)
Inter-RAT ANR Interval Type 0~10000 N/A None
Inter-RAT ANR Interval Type 0~10000 N/A None

Automatic
Neighbour Relation
Interval Type 1~50400 N/A min
(ANR)
Inter-RAT ANR
Automatic
Neighbour Relation Interval Type 1~10000 N/A None
(ANR)

Inter-RAT ANR Interval Type 1~10000 N/A None

Automatic
Neighbour Relation Interval Type 1~100 N/A None
(ANR)
Inter-RAT ANR;
SRVCC to UTRAN;
CS Fallback to
UTRAN;
Flash CS Fallback
to UTRAN;
Flash CS Fallback
to GERAN;
PS Inter-RAT
Interval Type 10~50400 N/A min
Mobility between E-
UTRAN and
UTRAN;
Service based inter-
RAT handover to
UTRAN;
Distance based
inter-RAT handover
to UTRAN;
Neighbor cell
Classification Interval Type 1~50400 N/A min
Management
Neighbor cell
Classification Interval Type 0~10000 N/A None
Management
Neighbor cell
Classification Interval Type 1~10000 N/A None
Management

None Interval Type 0~35 N/A None

 Andrew(Andrew),
TongYu(TongYu),
HaiTian(HaiTian), Andrew~0,
COMBA(COMBA), TongYu~1,
TTCOM(TTCOM), HaiTian~2,
MOBI(MOBI), COMBA~3,
GUOXIN(GUOXIN), TTCOM~4,
JIESAI(JIESAI), MOBI~5,
OtherManufacturer GUOXIN~6,
1(OtherManufactur JIESAI~7,
None Enumeration Type er1), OtherManufacturer None
OtherManufacturer 1~8,
2(OtherManufactur OtherManufacturer
er2), 2~9,
OtherManufacturer OtherManufacturer
3(OtherManufactur 3~10,
er3), HuaweiAgisson~11,
HuaweiAgisson(Hu ShengLu~12,
aweiAgisson), HongXin~13
ShengLu(ShengLu)
, HongXin(HongXin)

Remote Electrical
Interval Type 0 N/A None
Tilt Control

Remote Electrical
Interval Type 60~254 N/A None
Tilt Control

Remote Electrical
Interval Type 0 N/A None
Tilt Control

Remote Electrical
String Type 0~128 characters N/A None
Tilt Control

None Interval Type 0~15 N/A degree

None Interval Type 30,65,90,360 N/A degree

None Interval Type 33~64 N/A None

INTELLIGENT, INTELLIGENT~1,
None Enumeration Type None
DISTRIBUTED DISTRIBUTED~2

None Interval Type -90~90 N/A degree

SINGLE~1,
None Enumeration Type SINGLE, DUAL None
DUAL~2

None Interval Type 0~360 N/A degree

FOURPORTS(Four
Ports), FOURPORTS~0,
None Enumeration Type None
EIGHTPORTS(Eigh EIGHTPORTS~1
t Ports)

None Interval Type 0~100 N/A None

None Interval Type -180~180 N/A degree

None Interval Type 0~100 N/A None

None Interval Type -180~180 N/A degree

None Interval Type 0~100 N/A None

None Interval Type -180~180 N/A degree

None Interval Type 0~100 N/A None

None Interval Type -180~180 N/A degree

None Interval Type 0~100 N/A None

None Interval Type -180~180 N/A degree

None Interval Type 0~100 N/A None

None Interval Type -180~180 N/A degree

65535~429496729
None Interval Type N/A None
5
Inter-RAT ANR Interval Type 1~50400 N/A min

Inter-RAT ANR Interval Type 1~1000000 N/A None

Inter-RAT ANR Interval Type 0~100 N/A %
Inter-RAT ANR Interval Type 0~100 N/A %
Inter-RAT ANR Interval Type 0~100 N/A %
 FREE(FREE),
FREE~0,
Inter-RAT ANR Enumeration Type CONTROLLED(CO None
CONTROLLED~1
NTROLLED)

Busy-Hour
Download Rate
Control/Video Interval Type 1~63 N/A None
Service Rate
Adaption

Busy-Hour
Download Rate
Control/Video String Type 0~64 characters N/A None
Service Rate
Adaption
Busy-Hour
Download Rate
Control/Video Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None
Service Rate
Adaption

Busy-Hour
Download Rate
Control/Video Interval Type 0~127 N/A None
Service Rate
Adaption

Busy-Hour
Download Rate
Control/Video Interval Type 0~65535 N/A s
Service Rate
Adaption

Busy-Hour
Download Rate
Control/Video Interval Type 0~127,255 N/A None
Service Rate
Adaption
UL Unified Video
Interval Type 0~60 N/A s
Steering

UL Unified Video
Interval Type 0~60 N/A s
Steering

Busy-Hour
Download Rate
Control/Video Interval Type 0~127 N/A None
Service Rate
Adaption
Busy-Hour
VIDEO(VIDEO),
Download Rate VIDEO~0,
DOWNLOAD(DOW
Control/Video Enumeration Type DOWNLOAD~1, None
NLOAD),
Service Rate OTHER~2
OTHER(OTHER)
Adaption

QUEUE0(QUEUE0)
,
QUEUE1(QUEUE1)
,
QUEUE0~0,
QUEUE2(QUEUE2)
QUEUE1~1,
Busy-Hour ,
QUEUE2~2,
Download Rate QUEUE3(QUEUE3)
QUEUE3~3,
Control/Video Enumeration Type , None
QUEUE4~4,
Service Rate QUEUE4(QUEUE4)
QUEUE5~5,
Adaption ,
QUEUE6~6,
QUEUE5(QUEUE5)
QUEUE7~7
,
QUEUE6(QUEUE6)
,
QUEUE7(QUEUE7)
Busy-Hour
Download Rate
Control/Video Interval Type 0~4294967295 N/A Kbit/s
Service Rate
Adaption

Busy-Hour
Download Rate
Control/Video Interval Type 0~4294967295 N/A Kbit/s
Service Rate
Adaption

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~35 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
FDD(FDD),
Support of UE FDD~0, TDD~1,
Enumeration Type TDD(TDD), None
Category 6 FDDTDD~2
FDDTDD(FDDTDD)
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
FDD+TDD Carrier
Aggregation

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~35 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

None Interval Type 0~255 N/A None

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~1048575 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type 0~7 N/A None
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type -140~-43 N/A dBm
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Interval Type -40~-6 N/A 0.5dB
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
None Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
None Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
None Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
None Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
None Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
None Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0,
None Enumeration Type None
BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1
 BOOLEAN_FALSE( BOOLEAN_FALSE
Broadcast of False), ~0,
Enumeration Type None
system information BOOLEAN_TRUE( BOOLEAN_TRUE~
True) 1

2000-01-
Broadcast of 01T00:00:00+00:00
Compound Type N/A None
system information ~2099-12-
31T23:59:59+00:00

Broadcast of
Interval Type 1~365 N/A day
system information

Coordinated
Scheduling based
Power
Control(Cloud BB);
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Coordinated
Scheduling based
Power Control
(Cloud BB)
Coordinated
Scheduling based
Power
Control(Cloud BB); RSRP_UL(Uplink
Enumeration Type RSRP_UL~1 None
Coordinated RSRP)
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based STATIC_CONFIG(S
Power tatic Config), STATIC_CONFIG~
Control(Cloud BB); DYNAMIC_PARTITI 0,
Enumeration Type None
Coordinated ON_CONFIG(Dyna DYNAMIC_PARTITI
Scheduling based mic Partition ON_CONFIG~1
Power Control Config)
(Cloud BB)

Coordinated
Scheduling based
Power
Control(Cloud BB);
Interval Type 1~20 N/A s
Coordinated
Scheduling based
Power Control
(Cloud BB)
Coordinated
Scheduling based
Power
Control(Cloud BB);
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
Interval Type 0~100 N/A %
Power
Control(Cloud BB)
Coordinated
Scheduling based
Power
Control(Cloud BB);
Interval Type 2~10 N/A ms
Coordinated
Scheduling based
Power Control
(Cloud BB))

Coordinated
Scheduling based
Power
Control(Cloud BB);
Interval Type 1~25 N/A None
Coordinated
Scheduling based
Power Control
(Cloud BB)
Coordinated
Scheduling based
Interval Type 0~100 N/A %
Power
Control(Cloud BB)

Coordinated
TddCspcMacroMicr
Scheduling based TddCspcMacroMicr
Bit Field Type oSwitch(TddCspcM None
Power Control oSwitch~0
acroMicroSwitch)
(Cloud BB)
Coordinated
Scheduling based
Interval Type 0~100 N/A %
Power
Control(Cloud BB)

None Interval Type 0~9 N/A None

None IP Address Type Valid IP address N/A None

None Interval Type 0~65535 N/A None

 NONE(Not_Check),
UDP(Check_Wheth
NONE~0, UDP~1,
None Enumeration Type er_UDP), None
TCP~2
TCP(Check_Wheth
er_TCP)

Specified PCI
Group Based 0~46589,54436~65
Interval Type N/A None
Neighboring Cell 535
Management

Specified PCI
Group Based
Interval Type 0~503 N/A None
Neighboring Cell
Management
Specified PCI
Group Based
Interval Type 1~504 N/A None
Neighboring Cell
Management

GERAN
HoSwitch(Cdma200 ch~4,
CS Fallback to
01xRttServiceHoSw UtranServiceHoSwit
CDMA2000 1xRTT
itch), ch~5,
Flash CS Fallback
UlQualityInterRATH GeranServiceHoSw
to UTRAN
oSwitch(UlQualityIn itch~6,
Flash CS Fallback
terRATHoSwitch), CdmaHrpdServiceH
to GERAN
InterPlmnHoSwitch( oSwitch~7,
CS Fallback
InterPlmnHoSwitch) Cdma1xRttService
Steering to UTRAN
, HoSwitch~8,
CS Fallback
UtranFlashCsfbSwit UlQualityInterRATH
Steering to GERAN
ch(UtranFlashCsfb oSwitch~9,
Enhanced CS
Switch), InterPlmnHoSwitch
Fallback to
GeranFlashCsfbSwi ~10,
CDMA2000 1xRTT
tch(GeranFlashCsfb UtranFlashCsfbSwit
PS Inter-RAT
Switch), ch~11,
Mobility between E-
ServiceBasedInterF GeranFlashCsfbSwi
UTRAN and
reqHoSwitch(Servic tch~12,
UTRAN
eBasedInterFreqHo ServiceBasedInterF
PS Inter-RAT
Bit Field Type Switch), reqHoSwitch~13, None
Mobility between E-
UlQualityInterFreqH UlQualityInterFreqH
UTRAN and
oSwitch(UlQualityIn oSwitch~14,
GERAN
terFreqHoSwitch), CsfbAdaptiveBlindH
Service based inter-
CsfbAdaptiveBlindH oSwitch~15,
RAT handover to
oSwitch(CsfbAdapti UtranCsfbSteeringS
UTRAN
veBlindHoSwitch), witch~16,
Service based inter-
UtranCsfbSteeringS GeranCsfbSteering
RAT handover to
witch(UtranCsfbSte Switch~17,
GERAN
eringSwitch), CSFBLoadInfoSwit
Distance based
GeranCsfbSteering ch~18,
inter-RAT handover
Switch(GeranCsfbS Cdma1XrttEcsfbSwi
to UTRAN
teeringSwitch), tch~19,
Distance based
CSFBLoadInfoSwit EmcBlindHoA1Swit
inter-RAT handover
ch(CSFBLoadInfoS ch~20,
to GERAN
witch), EmcInterFreqBlind
Mobility
Cdma1XrttEcsfbSwi HoSwitch~21,
Management
tch(Cdma1XrttEcsfb EPlmnSwitch~22,
Coverage Based
Switch), ServiceReqInterFre
Inter-frequency
 CdmaHrpdNonOpti h~1,
misedHoSwitch(Cd Cdma1xRttVoipCap
SRVCC to UTRAN
maHrpdNonOptimis Switch~3,
SRVCC to GERAN
edHoSwitch), UtranPsHoSwitch~
CS Fallback to
CdmaHrpdOptimise 4,
UTRAN
dHoSwitch(CdmaHr GeranPsHoSwitch~
CS Fallback to
pdOptimisedHoSwit 5,
GERAN
ch), CdmaHrpdNonOpti
PS Inter-RAT
GeranNaccSwitch( misedHoSwitch~6,
Mobility between E-
GeranNaccSwitch), CdmaHrpdOptimise
UTRAN and
GeranCcoSwitch(G dHoSwitch~7,
UTRAN
eranCcoSwitch), GeranNaccSwitch~
PS Inter-RAT
UtranSrvccSwitch(U 8,
Mobility between E-
tranSrvccSwitch), GeranCcoSwitch~9,
UTRAN and
GeranSrvccSwitch( UtranSrvccSwitch~
GERAN
GeranSrvccSwitch), 10,
PS Inter-RAT
Cdma1xRttSrvccSw GeranSrvccSwitch~
Mobility between E-
itch(Cdma1xRttSrvc 11,
UTRAN and
Bit Field Type cSwitch), Cdma1xRttSrvccSw None
CDMA2000
UtranRedirectSwitc itch~12,
Flash CS Fallback
h(UtranRedirectSwit UtranRedirectSwitc
to UTRAN
ch), h~13,
CS Fallback
GeranRedirectSwitc GeranRedirectSwitc
Steering to UTRAN
h(GeranRedirectSw h~14,
Service based
itch), CdmaHrpdRedirect
Inter-RAT handover
CdmaHrpdRedirect Switch~15,
to UTRAN
Switch(CdmaHrpdR Cdma1xRttRedirect
Distance based
edirectSwitch), Switch~16,
Inter-RAT handover
Cdma1xRttRedirect BlindHoSwitch~17,
to UTRAN
Switch(Cdma1xRtt LcsSrvccSwitch~18
Service based
RedirectSwitch), ,
Inter-RAT handover
BlindHoSwitch(Blin AutoGapSwitch~19,
to GERAN
dHoSwitch), UeVoipOnHspaCap
Distance based
LcsSrvccSwitch(Lcs Switch~20,
Inter-RAT handover
SrvccSwitch), UtranFddB1CapSwi
to GERAN
AutoGapSwitch(Aut tch~21,
oGapSwitch), CdmaHrpdNonOpt
Downlink Static
Inter-Cell DlIcicSwitch_OFF_ DlIcicSwitch_OFF_
Interference ENUM, ENUM~0,
Coordination DlIcicDynamicSwitc DlIcicDynamicSwitc
Enumeration Type None
Downlink Dynamic h_ON_ENUM, h_ON_ENUM~1,
Inter-Cell DlIcicStaticSwitch_ DlIcicStaticSwitch_
Interference ON_ENUM ON_ENUM~2
Coordination
 witch~0,
ch(GeranEventAnr
IntraRatFastAnrSwit
Switch),
ch~1,
UtranFastAnrSwitch
IntraRatAnrAutoDel
(UtranFastAnrSwitc
Switch~2,
h),
UtranEventAnrSwitc
GeranFastAnrSwitc
h~3,
h(GeranFastAnrSwi
GeranEventAnrSwit
tch),
ch~4,
CdmaFastAnrSwitc
UtranFastAnrSwitch
h(CdmaFastAnrSwit
~5,
ch),
GeranFastAnrSwitc
UtranAutoNrtDelete
h~6,
Switch(UtranAutoNr
CdmaFastAnrSwitc
tDeleteSwitch),
h~7,
GeranAutoNrtDelet
UtranAutoNrtDelete
eSwitch(GeranAuto
Switch~8,
NrtDeleteSwitch),
Automatic GeranAutoNrtDelet
CdmaAutoNrtDelete
Neighbour Relation eSwitch~9,
Bit Field Type Switch(CdmaAutoN None
(ANR) CdmaAutoNrtDelete
rtDeleteSwitch),
Inter-RAT ANR Switch~10,
CdmaEventAnrSwit
CdmaEventAnrSwit
ch(CdmaEventAnrS
ch~12,
witch),
MlbBasedEventAnr
MlbBasedEventAnr
Switch~13,
Switch(MlbBasedEv
IntraRatNoHoSetAn
entAnrSwitch),
rSwitch~14,
IntraRatNoHoSetAn
IntraRatDoubleThd
rSwitch(IntraRatNo
AnrSwitch~15,
HoSetAnrSwitch),
ServiceBasedEvent
IntraRatDoubleThd
AnrSwitch~16,
AnrSwitch(IntraRat
ServiceReqEventA
DoubleThdAnrSwitc
nrSwitch~17,
h),
IntraRatEnhancedE
ServiceBasedEvent
ventAnrSwitch~18,
AnrSwitch(ServiceB
InterFreqAngcAnrS
asedEventAnrSwitc
witch~19,
h),
CaBasedEventAnrS
Admission Control
Congestion Control
Radio/transport
resource pre-
emption
LoadBasedSwitch~
PS Inter-RAT LoadBasedSwitch,
0,
Mobility between E- GeranFlashRedirect
GeranFlashRedirect
UTRAN and Switch,
Switch~1,
UTRAN Bit Field Type UtranFlashRedirect None
UtranFlashRedirect
PS Inter-RAT Switch,
Switch~2,
Mobility between E- LoadRedirectFreqO
LoadRedirectFreqO
UTRAN and ptSwitch
ptSwitch~3
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
 IntraFreqMroSwitch
(IntraFreqMroAlgoS
witch),
InterFreqMroSwitch
(InterFreqMroAlgoS
witch), IntraFreqMroSwitch
UtranMroSwitch(Utr ~0,
anMroSwitch), InterFreqMroSwitch
GeranMroSwitch(G ~1,
eranMroSwitch), UtranMroSwitch~2,
UEMroSwitch(UeMr GeranMroSwitch~3,
oAlgoSwitch), UEMroSwitch~4,
IntraFreqReselOptS IntraFreqReselOptS
Mobility Robust
Bit Field Type witch(IntraFreqRes witch~5, None
Optimization (MRO)
elOptSwitch), UtranUnnecHoOptS
UtranUnnecHoOptS witch~6,
witch(UtranUnnecH GeranUnnecHoOpt
oOptSwitch), Switch~7,
GeranUnnecHoOpt IntraRatCallbackSw
Switch(GeranUnnec itch~8,
HoOptSwitch), UnnecHoOptWithou
IntraRatCallbackSw tRIM~9
itch(IntraRatCallbac
kSwitch),
UnnecHoOptWithou
tRIM(UnnecHoOpt
WithoutRIM)

Dynamic
Enumeration Type OFF( Off), ON( On) OFF~0, ON~1 None
Scheduling
TCP Proxy
Enhancer (TPE) TpeAlgoSwitch(Tpe
Bit Field Type TpeAlgoSwitch~0 None
TCP Proxy AlgoSwitch)
Enhancer (TPE)

Camp Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

Uplink Static Inter-
Cell Interference
OFF(Off),
Coordination
STATIC(Static), OFF~0, STATIC~1,
Uplink Dynamic Enumeration Type None
DYNAMIC(Dynamic DYNAMIC~2
Inter-Cell
)
Interference
Coordination
 OtdoaSwitch(OTDO
A switch), OtdoaSwitch~0,
LoCation
Bit Field Type EcidInterFreqMeas EcidInterFreqMeas None
Services(LCS)
Switch(EcidInterFre Switch~1
qMeasSwitch)
Transport UlUuFlowCtrlSwitch
UlUuFlowCtrlSwitch
Differentiated Flow Bit Field Type (UU flow control None
~0
Control switch)
PCI Collision
Detection & Self- Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Optimization
 SymbolShutdownS
Symbol Power SymbolShutdownS
Bit Field Type witch(Symbol None
Saving witch~0
shutdown switch)
CS Fallback to UTRAN_RIM_SWIT
GERAN CH(UTRAN RIM UTRAN_RIM_SWIT
Flash CS Fallback Switch), CH~0,
Bit Field Type None
to UTRAN GERAN_RIM_SWI GERAN_RIM_SWI
Flash CS Fallback TCH(GERAN RIM TCH~1
to GERAN Switch)
 NBSLTEPLMNRou
ndSwitch(NBSLTEP
Automatic LMNRoundSwitch),
Neighbour Relation NBSLTERANSharin NBSLTEPLMNRou
(ANR) gSwitch(NBSLTER ndSwitch~0,
Inter-RAT ANR ANSharingSwitch), NBSLTERANSharin
RAN Sharing with NBSUTRANRANSh gSwitch~1,
Bit Field Type None
Common Carrier aringSwitch(NBSUT NBSUTRANRANSh
RAN Sharing with RANRANSharingS aringSwitch~2,
Dedicated Carrier witch), NBSGERANRANSh
Hybrid RAN NBSGERANRANSh aringSwitch~3
Sharing aringSwitch(NBSG
ERANRANSharing
Switch)
SRVCC Flexible
Steering to UTRAN
UtranFreqLayerMea
E-UTRAN to
sSwitch(UtranFreqL
UTRAN CS/PS UtranFreqLayerMea
ayerMeasSwitch),
Steering sSwitch~0,
UtranFreqLayerBlin
SRVCC to UTRAN UtranFreqLayerBlin
Bit Field Type dSwitch(UtranFreqL None
CS Fallback to dSwitch~1,
ayerBlindSwitch),
UTRAN UtranSrvccSteering
UtranSrvccSteering
Flash CS Fallback Switch~2
Switch(UtranSrvccS
to UTRAN
teeringSwitch)
CS Fallback
Steering to UTRAN

CMAS Support Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

VQM_ALGO_SWIT VQM_ALGO_SWIT
CH_OFF(Disable), CH_OFF~0,
None Enumeration Type None
VQM_ALGO_SWIT VQM_ALGO_SWIT
CH_ON(Enable) CH_ON~1
 IntraOpUeNumPree
mptSwitch(IntraOp
UeNumPreemptSwi IntraOpUeNumPree
Radio/transport
tch), mptSwitch~0,
resource pre- Bit Field Type None
InterOpUeNumPree InterOpUeNumPree
emption
mptSwitch(InterOp mptSwitch~1
UeNumPreemptSwi
tch)
SRVCC to UTRAN
SRVCC Flexible
Steering to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN
CS Fallback with
LAI to UTRAN
CS Fallback
Steering to UTRAN UtranSepOpMobility
UtranSepOpMobility
PS Inter-RAT Bit Field Type Switch(UtranSepOp None
Switch~0
Mobility between E- MobilitySwitch)
UTRAN and
UTRAN
Service based inter-
RAT
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
Steering
UL CoMP based on
Coordinated BBU
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
UlJointReceptionOv
Inter-Band Carrier
erBBUsSwitch(UlJoi
Aggregation for
ntReceptionOverBB
Downlink 2CC in UlJointReceptionOv
UsSwitch),
20MHz erBBUsSwitch~0,
FreqCfgCaOverBB
Carrier Aggregation FreqCfgCaOverBB
UsSwitch(FreqCfgC
for Downlink 2CC in UsSwitch~1,
Bit Field Type aOverBBUsSwitch), None
40MHz UlJROverRelaxedB
UlJROverRelaxedB
Support of UE HSw~2,
HSw(UlJROverRela
Category 6 UlSfnJROverBBUs
xedBHSw),
Flexible CA from Switch~3
UlSfnJROverBBUs
Multiple Carriers
Switch(UlSfnJROve
Inter-eNodeB CA
rBBUsSwitch)
based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 LcsInterRatMeasSw
LoCation LcsInterRatMeasSw
Bit Field Type itch(LcsInterRatMea None
Services(LCS) itch~0
sSwitch)
 ReduceInvalidA1A2
RptSigSwitch(Redu
Coverage Based ceInvalidA1A2RptSi
Inter-frequency gSwitch),
Handover MultiQciHoExecOpt
PS Inter-RAT Switch(MultiQciHoE ReduceInvalidA1A2
Mobility between E- xecOptSwitch), RptSigSwitch~0,
UTRAN and ReduceInvalidFreq MultiQciHoExecOpt
UTRAN PriHoSwitch(Reduc Switch~1,
PS Inter-RAT eInvalidFreqPriHoS ReduceInvalidFreq
Mobility between E- witch), PriHoSwitch~2,
UTRAN and AddA2MeasIfQciAd AddA2MeasIfQciAd
Bit Field Type None
GERAN jSwitch(AddA2Meas jSwitch~3,
Coverage Based IfQciAdjSwitch), InterFreqHoA2OptS
Intra-frequency InterFreqHoA2OptS witch~4,
Handover witch(InterFreqHoA McUtranNcellNumO
Distance Based 2OptSwitch), ptSwtich~5,
Inter-frequency McUtranNcellNumO ReduceMeasCtrlMe
Handover ptSwtich(McUtranN sNumSwitch~6
Service Based cellNumOptSwtich),
Inter-frequency ReduceMeasCtrlMe
Handover sNumSwitch(Reduc
eMeasCtrlMesNum
Switch)
 UECapRprtAbnorm
alCtrlSwitch(UECap
RprtAbnormalCtrlS
witch),
Coverage Based ApCqiRptAbnormal
Inter-frequency CtrlSwitch(ApCqiRp UECapRprtAbnorm
Handover tAbnormalCtrlSwitc alCtrlSwitch~0,
Service Based h), ApCqiRptAbnormal
Inter-frequency UeInterRatMeasCtrl CtrlSwitch~1,
Handover Switch(UeInterRatM UeInterRatMeasCtrl
Support of easCtrlSwitch), Switch~2,
aperiodic CQI VoipExProtSwitch(V VoipExProtSwitch~
reports oipExProtSwitch), 3,
PS Inter-RAT UeSRSAntSelectCtr UeSRSAntSelectCtr
Mobility between E- lSwitch(UeSRSAnt lSwitch~4,
Bit Field Type None
UTRAN and SelectCtrlSwitch), ApCqiAndAckAbnC
UTRAN ApCqiAndAckAbnC trlSwitch~5,
PS Inter-RAT trlSwitch(ApCqiAnd CaCqiAndAckAbnC
Mobility between E- AckAbnCtrlSwitch), trlSwitch~6,
UTRAN and CaCqiAndAckAbnC HoRlcSnSizeSwitch
GERAN trlSwitch(CaCqiAnd ~7,
SRVCC to UTRAN AckAbnCtrlSwitch), FddTddCaPcellDupl
SRVCC to GERAN HoRlcSnSizeSwitch exFdd~8,
Carrier Aggregation (RlcSnSizeSwitch), FddTddCaPcellDupl
for Downlink 2CC in FddTddCaPcellDupl exTdd~9
40MHz exFdd(FddTddCaP
cellDuplexFdd),
FddTddCaPcellDupl
exTdd(FddTddCaP
cellDuplexTdd)
 GeranBlindNcellOpt GeranBlindNcellOpt
Switch, Switch~0,
Inter-RAT ANR Bit Field Type None
UtranBlindNcellOpt UtranBlindNcellOpt
Switch Switch~1

eCoordinator based
RIM process
optimization
Flash CS Fallback
to UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Inter-RAT Load
Sharing to
UTRAN(based on
UMTS cell load
information)
CS Fallback to
UTRAN (based on
UMTS cell load
information)
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

itch),
~3,
Intra-Band Carrier SccModA6Switch(S
FreqCfgSwitch~4,
Aggregation for ccModA6Switch),
SccA2RmvSwitch~
Downlink 2CC in GbrAmbrJudgeSwit
5,
20MHz ch(GbrAmbrJudgeS
CaTrafficTriggerSwi
Inter-Band Carrier witch),
tch~6,
Aggregation for MtaAlgSwitch(MtaAl
HoWithSccCfgSwitc
Downlink 2CC in gSwitch),
h~7,
20MHz RelaxedBackhaulC
SccModA6Switch~8
Carrier Aggregation aSwitch(RelaxedBa
,
for Downlink 2CC in ckhaulCaSwitch),
GbrAmbrJudgeSwit
40MHz AdpCaSwitch(AdpC
ch~9,
Support of UE aSwitch),
MtaAlgSwitch~10,
Category 6 CaHoControlSwitch
RelaxedBackhaulC
Flexible CA from (CaHoControlSwitc
aSwitch~11,
Multiple Carriers h),
AdpCaSwitch~12,
Inter-eNodeB CA DistributeCloudbbC
CaHoControlSwitch
based on aSwitch(DistributeC
~13,
Coordinated BBU loudbbCaSwitch),
Bit Field Type DistributeCloudbbC None
Intra-band Carrier SccSmartCfgSwitch
aSwitch~14,
Aggregation for (SccSmartCfgSwitc
SccSmartCfgSwitch
Downlink 2CC in h),
~15,
30MHz IdleModePccAncho
IdleModePccAncho
Carrier Aggregation rSwitch(IdleModePc
rSwitch~16,
for Uplink 2CC cAnchorSwitch),
FreqPriBasedHoCa
Inter-eNodeB CA FreqPriBasedHoCa
FiltSwitch~17,
based on relaxed FiltSwitch(FreqPriB
CaSccSuspendSwit
backhaul asedHoCaFiltSwitc
ch~18,
Carrier Aggregation h),
PccSmartCfgSwitch
for Downlink 3CC in CaSccSuspendSwit
~19,
40MHz ch(CaSccSuspend
CaA5HoEventSwitc
Carrier Aggregation Switch),
h~20,
for Downlink 3CC in PccSmartCfgSwitch
EnhancedPccAnch
60MHz (PccSmartCfgSwitc
orSwitch~21,
Carrier Aggregation h),
CaAdpPreSchSwitc
for Downlink 4CC CaA5HoEventSwitc
h~22,
and 5CC h(CaA5HoEventSwi
CaPreSchSwitch~2
tch),
 INTER_FREQ_IDL
Intra-LTE Load E_MLB_SWITCH(I INTER_FREQ_IDL
Bit Field Type None
Balancing NTER_FREQ_IDLE E_MLB_SWITCH~0
_MLB_SWITCH)
Coverage Based
Inter-frequency
Handover
BasedSriGapOptS
PS Inter-RAT
witch(BasedSriGap
Mobility between E-
OptSwitch),
UTRAN and
L2UBasedHoPolicy BasedSriGapOptS
UTRAN
PenaltySwitch(L2U witch~0,
PS Inter-RAT
BasedHoPolicyPen L2UBasedHoPolicy
Mobility between E-
altySwitch), PenaltySwitch~1,
UTRAN and
DrxBasedSriGapOp DrxBasedSriGapOp
GERAN Bit Field Type None
tSwitch(DrxBasedSr tSwitch~2,
Distance Based
iGapOptSwitch), LaiCsfbBlindNCellS
Inter-frequency
LaiCsfbBlindNCellS elSwitch~3,
Handover
elSwitch(LaiCsfbBli TrigQuanBothMeas
Service Based
ndNCellSelSwitch), OptSw~4
Inter-frequency
TrigQuanBothMeas
Handover
OptSw(TrigQuanBo
CS Fallback to
thMeasOptSw)
UTRAN
CS Fallback to
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Service based
SPECSIGRETRAN
Inter-RAT handover
SOPTSWITCH(SP
to UTRAN SPECSIGRETRAN
ECSIGRETRANSO
Service based SOPTSWITCH~0,
Bit Field Type PTSWITCH), None
Inter-RAT handover FlowCtrlTriBackoffS
FlowCtrlTriBackoffS
to GERAN witch~1
witch(FlowCtrlTriBa
Distance based
ckoffSwitch)
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to GERAN
E-UTRAN to
UTRAN CS/PS
Steering
RACH Optimization
 LOADNOTBALANC
Dynamic ESCHSWITCH(LO LOADNOTBALANC
Bit Field Type None
Scheduling ADNOTBALANCES ESCHSWITCH~0
CHSWITCH)
Random Access
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Procedure
High Speed Mobility Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

TransDropPktsStat
TransDropPktsStat
None Bit Field Type Switch(TransDropP None
Switch~0
ktsStatSwitch)
Inter-RAT ANR
SRVCC to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN GERAN_SWITCH(
Flash CS Fallback GERAN
to GERAN Neighboring Cell GERAN_SWITCH~
PS Inter-RAT Ranking Switch), 0,
Bit Field Type None
Mobility between E- UTRAN_SWITCH( UTRAN_SWITCH~
UTRAN and UTRAN 1
UTRAN Neighboring Cell
Service based inter- Ranking Switch)
RAT handover to
UTRAN
Distance based
inter-RAT handover
to UTRAN

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

 L2LoadBalanceSwit
L2LoadBalanceSwit
None Bit Field Type ch(L2 Load Balance None
ch~0
Switch)
RACH Optimization Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Automatic
Congestion
Handling ACHSwitch(ACHSw
Bit Field Type ACHSwitch~0 None
Automatic itch)
Congestion
Handling(TDD)

None Enumeration Type OFF(OFF), ON(ON) OFF~0, ON~1 None

 BaseBandResetSwi
tch(BaseBandReset
Switch), BaseBandResetSwi
RFResetSwitch(RF tch~0,
Cell Outage ResetSwitch), RFResetSwitch~1,
Detection and Bit Field Type BBPResetDelaySwi BBPResetDelaySwi None
Compensation tch(BBPResetDelay tch~2,
Switch), RFResetDelaySwitc
RFResetDelaySwitc h~3
h(RFResetDelaySw
itch)
 COLLISION_DETE
CT_SWITCH(COLL
ISION_DETECT_S COLLISION_DETE
PCI Collision
WITCH), CT_SWITCH~0,
Detection & Self- Bit Field Type None
CONFUSION_DET CONFUSION_DET
Optimization
ECT_SWITCH(CO ECT_SWITCH~1
NFUSION_DETEC
T_SWITCH)
CA UE Load DlCaLbAlgoSwitch( DlCaLbAlgoSwitch~
Bit Field Type None
Balancing DlCaLbAlgoSwitch) 0

Dynamic
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Scheduling
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

 ADAPTIVE_PROP
ADAPTIVE_PROP
None Bit Field Type ORTION(ADAPTIV None
ORTION~0
E_PROPORTION)
None Interval Type 0~10080 N/A min
None Interval Type 1~10000 N/A None
CA UE Load 3CC(3CC),
Enumeration Type 3CC~0, 2CC~1 None
Balancing 2CC(2CC)

CA UE Load
Interval Type 0~99 N/A None
Balancing
RAN Sharing with
Common Carrier
RAN Sharing with
Interval Type 1~100 N/A %
Dedicated Carrier
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
SHARING(Sharing),
RAN Sharing with SHARING~0,
Enumeration Type DEDICATE(Dedicat None
Dedicated Carrier DEDICATE~1
e)
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
RAN Sharing with
Interval Type 0~5 N/A None
Dedicated Carrier
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
RAN Sharing with
Interval Type 0~100 N/A %
Dedicated Carrier
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
Interval Type 0~100 N/A %
Hybrid RAN
Sharing
Mobility Robust
Interval Type 1~70000 N/A min
Optimization(MRO)

Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)

Mobility Robust
Interval Type 0~10000 N/A None
Optimization(MRO)
Mobility Robust
Interval Type 1~60 N/A s
Optimization(MRO)

Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)
Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)

Mobility Robust
Interval Type -140~-44 N/A dBm
Optimization(MRO)
Mobility Robust
Interval Type -140~-44 N/A dBm
Optimization(MRO)

Mobility Robust
Interval Type 1~7 N/A None
Optimization(MRO)
Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)

Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)
 FREE(FREE),
Mobility Robust FREE~0,
Enumeration Type CONTROLLED(CO None
Optimization(MRO) CONTROLLED~1
NTROLLED)

Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)
Mobility Robust
Interval Type -140~-44 N/A dBm
Optimization(MRO)
Mobility Robust
Interval Type -141~-43 N/A dBm
Optimization(MRO)

Mobility Robust
Interval Type 0~10000 N/A None
Optimization(MRO)
Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)
Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)
Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)

Mobility Robust
Interval Type 1~30 N/A None
Optimization(MRO)
Mobility Robust
Interval Type 1~60 N/A s
Optimization(MRO)
Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)
Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)
Mobility Robust
Interval Type 0~100 N/A %
Optimization(MRO)
Mobility Robust
Interval Type 0~100 N/A s
Optimization(MRO)

None Interval Type 0~9 N/A None

None Interval Type 0~100 N/A %

None Interval Type 0~100 N/A %

None Interval Type 0~50000 N/A ms

None Interval Type 0~50000 N/A ms

None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

TCP Proxy
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Enhancer(TPE)

TCP Proxy
Interval Type 0~4294967295 N/A bit/s
Enhancer(TPE)

TCP Proxy
Interval Type 1~255 N/A ms
Enhancer(TPE)
TCP Proxy
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Enhancer(TPE)

TCP Proxy
Interval Type 1~1460 N/A byte
Enhancer(TPE)
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
configuration type 7
Optional uplink- 0~261120,275943~
Interval Type N/A Ts
downlink subframe 307200
configuration
uplink-downlink
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5

Radio Bearer
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Management
None Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None

TCP Proxy
Interval Type 0~20 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)
TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)
TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

TCP Proxy
Interval Type 0~65535 N/A None
Enhancer(TPE)

None Interval Type 1~255 N/A ms

None Interval Type 0~500 N/A None

None Interval Type 0~500 N/A None

None Interval Type 0~500 N/A None

None Interval Type 0~100 N/A %

None Interval Type 0~100 N/A %
None Interval Type 0~100 N/A None
None Interval Type 0~100 N/A None

None Interval Type 0~500 N/A None

None Interval Type 0~100 N/A %
None Interval Type 0~100 N/A %
None Interval Type 0~100 N/A %
None Interval Type 0~100 N/A %

License
Interval Type 0~65535 N/A min
Management

License
Interval Type 50~100 N/A %
Management
License
Interval Type 1~65535 N/A min
Management

License
Interval Type 49~99 N/A %
Management

arameter0_bit10), ~6,
RsvdSwPara0_bit1 RsvdSwPara0_bit8
1(ReservedSwitchP ~7,
arameter0_bit11), RsvdSwPara0_bit9
RsvdSwPara0_bit1 ~8,
2(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit12), 0~9,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
3(ReservedSwitchP 1~10,
arameter0_bit13), RsvdSwPara0_bit1
RsvdSwPara0_bit1 2~11,
4(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit14), 3~12,
RsvdSwPara0_bit1 RsvdSwPara0_bit1
5(ReservedSwitchP 4~13,
arameter0_bit15), RsvdSwPara0_bit1
RsvdSwPara0_bit1 5~14,
6(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit16), 6~15,
None Bit Field Type None
RsvdSwPara0_bit1 RsvdSwPara0_bit1
7(ReservedSwitchP 7~16,
arameter0_bit17), RsvdSwPara0_bit1
RsvdSwPara0_bit1 8~17,
8(ReservedSwitchP RsvdSwPara0_bit1
arameter0_bit18), 9~18,
RsvdSwPara0_bit1 RsvdSwPara0_bit2
9(ReservedSwitchP 0~19,
arameter0_bit19), RsvdSwPara0_bit2
RsvdSwPara0_bit2 1~20,
0(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit20), 2~21,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
1(ReservedSwitchP 3~22,
arameter0_bit21), RsvdSwPara0_bit2
RsvdSwPara0_bit2 4~23,
2(ReservedSwitchP RsvdSwPara0_bit2
arameter0_bit22), 5~24,
RsvdSwPara0_bit2 RsvdSwPara0_bit2
 arameter1_bit10), ~6,
RsvdSwPara1_bit1 RsvdSwPara1_bit8
1(ReservedSwitchP ~7,
arameter1_bit11), RsvdSwPara1_bit9
RsvdSwPara1_bit1 ~8,
2(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit12), 0~9,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
3(ReservedSwitchP 1~10,
arameter1_bit13), RsvdSwPara1_bit1
RsvdSwPara1_bit1 2~11,
4(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit14), 3~12,
RsvdSwPara1_bit1 RsvdSwPara1_bit1
5(ReservedSwitchP 4~13,
arameter1_bit15), RsvdSwPara1_bit1
RsvdSwPara1_bit1 5~14,
6(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit16), 6~15,
None Bit Field Type None
RsvdSwPara1_bit1 RsvdSwPara1_bit1
7(ReservedSwitchP 7~16,
arameter1_bit17), RsvdSwPara1_bit1
RsvdSwPara1_bit1 8~17,
8(ReservedSwitchP RsvdSwPara1_bit1
arameter1_bit18), 9~18,
RsvdSwPara1_bit1 RsvdSwPara1_bit2
9(ReservedSwitchP 0~19,
arameter1_bit19), RsvdSwPara1_bit2
RsvdSwPara1_bit2 1~20,
0(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit20), 2~21,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
1(ReservedSwitchP 3~22,
arameter1_bit21), RsvdSwPara1_bit2
RsvdSwPara1_bit2 4~23,
2(ReservedSwitchP RsvdSwPara1_bit2
arameter1_bit22), 5~24,
RsvdSwPara1_bit2 RsvdSwPara1_bit2
 arameter2_bit10), ~6,
RsvdSwPara2_bit1 RsvdSwPara2_bit8
1(ReservedSwitchP ~7,
arameter2_bit11), RsvdSwPara2_bit9
RsvdSwPara2_bit1 ~8,
2(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit12), 0~9,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
3(ReservedSwitchP 1~10,
arameter2_bit13), RsvdSwPara2_bit1
RsvdSwPara2_bit1 2~11,
4(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit14), 3~12,
RsvdSwPara2_bit1 RsvdSwPara2_bit1
5(ReservedSwitchP 4~13,
arameter2_bit15), RsvdSwPara2_bit1
RsvdSwPara2_bit1 5~14,
6(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit16), 6~15,
None Bit Field Type None
RsvdSwPara2_bit1 RsvdSwPara2_bit1
7(ReservedSwitchP 7~16,
arameter2_bit17), RsvdSwPara2_bit1
RsvdSwPara2_bit1 8~17,
8(ReservedSwitchP RsvdSwPara2_bit1
arameter2_bit18), 9~18,
RsvdSwPara2_bit1 RsvdSwPara2_bit2
9(ReservedSwitchP 0~19,
arameter2_bit19), RsvdSwPara2_bit2
RsvdSwPara2_bit2 1~20,
0(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit20), 2~21,
RsvdSwPara2_bit2 RsvdSwPara2_bit2
1(ReservedSwitchP 3~22,
arameter2_bit21), RsvdSwPara2_bit2
RsvdSwPara2_bit2 4~23,
2(ReservedSwitchP RsvdSwPara2_bit2
arameter2_bit22), 5~24,
RsvdSwPara2_bit2 RsvdSwPara2_bit2
 arameter3_bit10), ~6,
RsvdSwPara3_bit1 RsvdSwPara3_bit8
1(ReservedSwitchP ~7,
arameter3_bit11), RsvdSwPara3_bit9
RsvdSwPara3_bit1 ~8,
2(ReservedSwitchP RsvdSwPara3_bit1
arameter3_bit12), 0~9,
RsvdSwPara3_bit1 RsvdSwPara3_bit1
3(ReservedSwitchP 1~10,
arameter3_bit13), RsvdSwPara3_bit1
RsvdSwPara3_bit1 2~11,
4(ReservedSwitchP RsvdSwPara3_bit1
arameter3_bit14), 3~12,
RsvdSwPara3_bit1 RsvdSwPara3_bit1
5(ReservedSwitchP 4~13,
arameter3_bit15), RsvdSwPara3_bit1
RsvdSwPara3_bit1 5~14,
6(ReservedSwitchP RsvdSwPara3_bit1
arameter3_bit16), 6~15,
None Bit Field Type None
RsvdSwPara3_bit1 RsvdSwPara3_bit1
7(ReservedSwitchP 7~16,
arameter3_bit17), RsvdSwPara3_bit1
RsvdSwPara3_bit1 8~17,
8(ReservedSwitchP RsvdSwPara3_bit1
arameter3_bit18), 9~18,
RsvdSwPara3_bit1 RsvdSwPara3_bit2
9(ReservedSwitchP 0~19,
arameter3_bit19), RsvdSwPara3_bit2
RsvdSwPara3_bit2 1~20,
0(ReservedSwitchP RsvdSwPara3_bit2
arameter3_bit20), 2~21,
RsvdSwPara3_bit2 RsvdSwPara3_bit2
1(ReservedSwitchP 3~22,
arameter3_bit21), RsvdSwPara3_bit2
RsvdSwPara3_bit2 4~23,
2(ReservedSwitchP RsvdSwPara3_bit2
arameter3_bit22), 5~24,
RsvdSwPara3_bit2 RsvdSwPara3_bit2

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~4294967295 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~65535 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

None Interval Type 0~255 N/A None

Adaptive Power
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
Consumption
Adaptive Power
Compound Type 22:00:00~05:00:00 N/A None
Consumption

Adaptive Power
Compound Type 23:00:00~06:00:00 N/A None
Consumption
 NORMAL(Normal),
POWER_OFF(RF NORMAL~0,
None Enumeration Type None
Module Regular POWER_OFF~1
Time Sleep Mode)

None Interval Type 1~20 N/A s

None Interval Type 50~100 N/A %
Intelligent Access
FLOWCONTROL(F
Class Control
LOWCONTROL), FLOWCONTROL~0
Dynamic Service Enumeration Type None
CPULOAD(CPULO , CPULOAD~1
Specific Access
AD)
Control(SSAC)

Intelligent Access
Class Control
Dynamic Service Interval Type 50~100 N/A %
Specific Access
Control(SSAC)
 Actual Value Recommended Initial Value
Default Value Impact
Range Value Setting Source

Radio Planning CnOperatorExtende

0~5 None None
(Internal planning) dQci

CnOperatorExtende
10~254 None None Engineering Design
dQci

CnOperatorExtende
0~9 0 None Engineering Design
dQci

CnOperatorExtende
0~9 0 None Engineering Design
dQci

0~5 None None Engineering Design CnOperatorHoCfg

EUTRAN_TDD,
Default/Recommen
EUTRAN_FDD, EUTRAN EUTRAN CnOperatorHoCfg
ded Value
EUTRAN

EUTRAN_TDD,
Default/Recommen
EUTRAN_FDD, NULL NULL CnOperatorHoCfg
ded Value
NULL
 Default/Recommen
-100,-20~20 0 0 CnOperatorHoCfg
ded Value
 Default/Recommen
-100,-20~20 0 0 CnOperatorHoCfg
ded Value
 Default/Recommen
-100,-20~20 0 0 CnOperatorHoCfg
ded Value
 Default/Recommen
-100,-20~20 0 0 CnOperatorHoCfg
ded Value
 Default/Recommen
OFF, ON OFF(Off) ON(on) CnOperatorHoCfg
ded Value

UTRAN, GERAN, Radio Planning

GERAN(GERAN) GERAN(GERAN) CnOperatorHoCfg
CDMA2000, NULL (Internal planning)
UTRAN, GERAN, Radio Planning
UTRAN(UTRAN) UTRAN(UTRAN) CnOperatorHoCfg
CDMA2000 (Internal planning)

UTRAN, GERAN, CDMA2000(CDMA CDMA2000(CDMA Radio Planning

CnOperatorHoCfg
CDMA2000, NULL 2000) 2000) (Internal planning)

Radio Planning
0~5 None None CnOperatorSpidCfg
(Internal planning)
1~256 None None Engineering Design CnOperatorSpidCfg

NOT_CFG(NOT_C Radio Planning

NOT_CFG, CFG None CnOperatorSpidCfg
FG) (Internal planning)

Radio Planning
0~255 0 None CnOperatorSpidCfg
(Internal planning)

Radio Planning CnOperatorStandar

0~5 None None
(Internal planning) dQci
QCI1, QCI2, QCI3,
QCI4, QCI5, QCI6, None None
QCI7, QCI8, QCI9
CnOperatorStandar
Engineering Design
dQci

CnOperatorStandar
0~9 0 None Engineering Design
dQci

CnOperatorStandar
0~9 0 None Engineering Design
dQci
SERVICE_HO_QCI
SERVICE_HO_QCI SERVICE_HO_QCI
_ALLOWED, CnOperatorStandar
_ALLOWED(QCI _ALLOWED(QCI Engineering Design
SERVICE_HO_QCI dQci
Bear Allowed) Bear Allowed)
_NOT_ALLOWED
 QCI 1: 0, QCI 2: 0,
QCI 3: 0, QCI 4: 0,
CnOperatorStandar
0~15 0 QCI 5: 0, QCI 6: 0, Engineering Design
dQci
QCI 7: 0, QCI 8: 0,
QCI 9: 0

CSFallBackBlindHo
0~5 None None Engineering Design
Cfg
UTRAN, GERAN, Default/Recommen CSFallBackBlindHo
UTRAN UTRAN
CDMA2000 ded Value Cfg
UTRAN, GERAN, Default/Recommen CSFallBackBlindHo
GERAN GERAN
CDMA2000, NULL ded Value Cfg
UTRAN, GERAN, Default/Recommen CSFallBackBlindHo
CDMA2000 CDMA2000
CDMA2000, NULL ded Value Cfg

Default/Recommen CSFallBackBlindHo
OFF, ON OFF(Off) OFF(Off)
ded Value Cfg

Default/Recommen CSFallBackBlindHo
OFF, ON OFF(Off) OFF(Off)
ded Value Cfg
 Default/Recommen CSFallBackBlindHo
OFF, ON OFF(Off) OFF(Off)
ded Value Cfg

UTRAN, GERAN, Default/Recommen CSFallBackBlindHo

UTRAN UTRAN
CDMA2000 ded Value Cfg
UTRAN, GERAN, Default/Recommen CSFallBackBlindHo
GERAN GERAN
CDMA2000, NULL ded Value Cfg
UTRAN, GERAN, Default/Recommen CSFallBackBlindHo
CDMA2000 CDMA2000
CDMA2000, NULL ded Value Cfg

Default/Recommen CSFallBackBlindHo
OFF, ON OFF(OFF) OFF(Off)
ded Value Cfg
 REDIRECTION:On, REDIRECTION:On,
REDIRECTION, Default/Recommen CSFallBackPolicyCf
CCO_HO:On, CCO_HO:On,PS_H
CCO_HO, PS_HO ded Value g
PS_HO:On O:On

REDIRECTION:On, REDIRECTION:On,
REDIRECTION, Default/Recommen CSFallBackPolicyCf
CCO_HO:On, CCO_HO:On,PS_H
CCO_HO, PS_HO ded Value g
PS_HO:On O:On

CSFallBackPolicyCf
OFF, ON OFF(Off) OFF Engineering Design
g
 CSFallBackPolicyCf
1~15 2 2 Engineering Design
g

Radio Planning
EutranVoipHoBlkLis
000~999 None None (Negotiation with
t
the peer)

Radio Planning
EutranVoipHoBlkLis
00~99,000~999 None None (Negotiation with
t
the peer)
 Radio Planning
EutranVoipHoBlkLis
0~65535 None None (Negotiation with
t
the peer)

Radio Planning
0~5 None None InterPlmnHoList
(Internal planning)

Radio Planning
000~999 None None (Negotiation with InterPlmnHoList
the peer)
 Radio Planning
00~99,000~999 None None (Negotiation with InterPlmnHoList
the peer)

RatFreqPriorityGrou
0~255 None None Engineering Design
p

EUTRAN, UTRAN,
GERAN, Default/Recommen RatFreqPriorityGrou
None None
CDMA20001XRTT, ded Value p
CDMA2000HRPD
0~46589,54436~65 Radio Planning RatFreqPriorityGrou
None None
535 (Internal planning) p

Radio Planning RatFreqPriorityGrou

0~7 0 None
(Internal planning) p

GSM_dcs1800, RatFreqPriorityGrou
GSM_dcs1800 None Engineering Design
GSM_pcs1900 p

Radio Planning ServiceIfDlEarfcnGr

0~5 None None
(Internal planning) p
 ServiceIfDlEarfcnGr
0~9 None None Engineering Design
p

Radio Planning ServiceIfDlEarfcnGr

0~7 None None
(Internal planning) p

0~46589,54436~65 Default/Recommen ServiceIfDlEarfcnGr

0 None
535 ded Value p
 Default/Recommen ServiceIfDlEarfcnGr
0~7 3 None
ded Value p

Radio Planning ServiceIfHoCfgGrou

0~5 None None
(Internal planning) p

ServiceIfHoCfgGrou
0~9 None None Engineering Design
p
NO_HO, Default/Recommen ServiceIfHoCfgGrou
NO_HO NO_HO
PERMIT_HO ded Value p

ServiceIfHoCfgGrou
10~20000 3000 3000 N/A
p
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, ServiceIfHoCfgGrou
640ms(640ms) 640ms(640ms) Engineering Design
480ms, 512ms, p
640ms, 1024ms,
1280ms, 2560ms,
5120ms

Radio Planning ServiceIrHoCfgGro

0~5 None None
(Internal planning) up
 ServiceIrHoCfgGro
0~9 None None Engineering Design
up

NO_HO,
Default/Recommen ServiceIrHoCfgGro
PERMIT_HO, NO_HO NO_HO
ded Value up
MUST_HO
SERVIC_IR_MEAS
_NO_ORDER, SERVIC_IR_MEAS SERVIC_IR_MEAS ServiceIrHoCfgGro
Engineering Design
SERVICE_IR_MEA _NO_ORDER _NO_ORDER up
S_ORDER

1~256 None None Engineering Design SpidCfg

Default/Recommen
FALSE, TRUE FALSE(FALSE) None SpidCfg
ded Value
 NOT_CFG(NOT_C Radio Planning
NOT_CFG, CFG None SpidCfg
FG) (Internal planning)

Radio Planning
0~255 0 None SpidCfg
(Internal planning)

Default/Recommen
FALSE, TRUE TRUE(TRUE) None SpidCfg
ded Value

Default/Recommen
FALSE, TRUE TRUE(TRUE) None SpidCfg
ded Value
 Default/Recommen
FALSE, TRUE TRUE(TRUE) None SpidCfg
ded Value

Default/Recommen
FALSE, TRUE FALSE(FALSE) None SpidCfg
ded Value

Default/Recommen
0.1~1 10 10 SpidCfg
ded Value
 Default/Recommen
0.1~1 10 10 SpidCfg
ded Value

Default/Recommen
-10~10 0 0 SpidCfg
ded Value
 Default/Recommen
-20~20 0 0 SpidCfg
ded Value
 Default/Recommen
-20~20 0 0 SpidCfg
ded Value
NONE, Default/Recommen
NONE(NONE) NONE(NONE) SpidCfg
SPECSERUSER ded Value

0~255 None NONE Engineering Design SpidGrpCfg

0~256 None NONE Engineering Design SpidGrpCfg

0~256 None NONE Engineering Design SpidGrpCfg

Radio Planning
1~256 None None (Negotiation with SpidHPlmnList
the peer)

Radio Planning
1~256 None None (Negotiation with SpidHPlmnList
the peer)
 Radio Planning
000~999 None None (Negotiation with SpidHPlmnList
the peer)

Radio Planning
00~99,000~999 None None (Negotiation with SpidHPlmnList
the peer)
 Radio Planning
UtranNetworkCapCf
000~999 None None (Negotiation with
g
the peer)

Radio Planning
UtranNetworkCapCf
00~99,000~999 None None (Negotiation with
g
the peer)
 Radio Planning
0~65535,42949672 UtranNetworkCapCf
None None (Negotiation with
95 g
the peer)
PsHoCapCfg, PsHoCapCfg:Off, PsHoCapCfg:Off,
SiByRimCapCfg, SiByRimCapCfg:Off SiByRimCapCfg:Off
Radio Planning UtranNetworkCapCf
VoipCapCfg, , VoipCapCfg:On, , VoipCapCfg:On,
(Internal planning) g
UltraFlashCsfbCap UltraFlashCsfbCap UltraFlashCsfbCap
Cfg Cfg:Off Cfg:Off

Radio Planning eNBCnOpQciRsvd

0~5 None None
(Internal planning) Para

Radio Planning eNBCnOpQciRsvd

1~9 None None
(Internal planning) Para
 Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit8:
0,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit9:
1,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
2,
0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
3,
1:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
4,
2:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
5,
3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
6,
4:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
7,
5:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
8,
6:Off, eNBCnOpQciRsvd
RsvdSwPara0_bit1 None Engineering Design
RsvdSwPara0_bit1 Para
9,
7:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
0,
8:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
1,
9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
2,
0:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
3,
1:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
4,
2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
5,
3:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
6,
4:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
7,
5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
 Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit8:
0,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit9:
1,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
2,
0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
3,
1:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
4,
2:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
5,
3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
6,
4:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
7,
5:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
8,
6:Off, eNBCnOpQciRsvd
RsvdSwPara1_bit1 None Engineering Design
RsvdSwPara1_bit1 Para
9,
7:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
0,
8:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
1,
9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
2,
0:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
3,
1:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
4,
2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
5,
3:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
6,
4:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
7,
5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
 On,
RsvdSwPara2_bit1
RsvdSwPara2_bit8:
0,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit9:
1,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
2,
0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
3,
1:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
4,
2:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
5,
3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
6,
4:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
7,
5:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
8,
6:On, eNBCnOpQciRsvd
RsvdSwPara2_bit1 None Engineering Design
RsvdSwPara2_bit1 Para
9,
7:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
0,
8:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
1,
9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
2,
0:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
3,
1:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
4,
2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
5,
3:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
6,
4:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
7,
5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2

eNBCnOpQciRsvd
0~4294967295 0 None Engineering Design
Para
 eNBCnOpQciRsvd
0~4294967295 0 None Engineering Design
Para

eNBCnOpQciRsvd
0~4294967295 0 None Engineering Design
Para
 eNBCnOpQciRsvd
0~4294967295 0 None Engineering Design
Para

eNBCnOpQciRsvd
0~65535 0 None Engineering Design
Para
 eNBCnOpQciRsvd
0~65535 0 None Engineering Design
Para

eNBCnOpQciRsvd
0~65535 0 None Engineering Design
Para
 eNBCnOpQciRsvd
0~65535 0 None Engineering Design
Para

eNBCnOpQciRsvd
0~65535 0 None Engineering Design
Para
 eNBCnOpQciRsvd
0~65535 0 None Engineering Design
Para

eNBCnOpQciRsvd
0~65535 0 None Engineering Design
Para
 eNBCnOpQciRsvd
0~65535 0 None Engineering Design
Para

eNBCnOpQciRsvd
0~255 0 None Engineering Design
Para
 eNBCnOpQciRsvd
0~255 0 None Engineering Design
Para

eNBCnOpQciRsvd
0~255 0 None Engineering Design
Para
 eNBCnOpQciRsvd
0~255 0 None Engineering Design
Para

eNBCnOpQciRsvd
0~255 0 None Engineering Design
Para
 eNBCnOpQciRsvd
0~255 0 None Engineering Design
Para

eNBCnOpQciRsvd
0~255 0 None Engineering Design
Para
 eNBCnOpQciRsvd
0~255 0 None Engineering Design
Para

Radio Planning
1~64 characters None None eNodeBFunction
(Internal planning)
1~255 1 None N/A eNodeBFunction

Radio Planning
0~1048575 0 None eNodeBFunction
(Internal planning)

0~256 characters NULL(empty string) None Engineering Design eNodeBFunction

0~64 characters NULL(empty string) None N/A eNodeBFunction

Default/Recommen
0~128 characters NULL(empty string) None eNodeBFunction
ded Value

Radio Planning
1~100 None None EUAPN
(Internal planning)

Radio Planning
Valid IP address 0.0.0.0 None EUAPN
(Internal planning)
 Radio Planning
Valid IP address 0.0.0.0 None EUAPN
(Internal planning)

Radio Planning
1~15 None None EUAPN
(Internal planning)

Radio Planning
0~65535 None None EUAPNTemplate
(Internal planning)

Radio Planning
1~100 None None EUAPNTemplate
(Internal planning)

Radio Planning
5~254 None None EUAPNTemplate
(Internal planning)

Radio Planning
1~4294967295 None None EUAPNTemplate
(Internal planning)
 Radio Planning
1~4294967295 None None EUAPNTemplate
(Internal planning)

Radio Planning
1~15 None None EUAPNTemplate
(Internal planning)

DISABLED, Radio Planning

None None EUAPNTemplate
ENABLED (Internal planning)

DISABLED, Radio Planning

None None EUAPNTemplate
ENABLED (Internal planning)

Radio Planning
0~255 None None EUEPCInfo
(Internal planning)

Radio Planning
32768~65535 None None EUEPCInfo
(Internal planning)

Radio Planning
0~255 None None EUEPCInfo
(Internal planning)
 Radio Planning
0~64 None None EUEPCInfo
(Internal planning)

Radio Planning
0~64 None None EUEPCInfo
(Internal planning)

EEA0:Off, EEA0:Off, Radio Planning

EEA0, EEA1, EEA2 EUEPCSec
EEA1:Off, EEA2:On EEA1:Off, EEA2:On (Internal planning)

Radio Planning
EIA1, EIA2 EIA1:Off, EIA2:On EIA1:Off, EIA2:On EUEPCSec
(Internal planning)

Radio Planning
1~15 None None EUIPAddressPool
(Internal planning)
 Radio Planning
Valid IP address None None EUIPAddressPool
(Internal planning)

Radio Planning
Valid IP address None None EUIPAddressPool
(Internal planning)

Radio Planning
Valid Mask address None None EUIPAddressPool
(Internal planning)

Radio Planning
0~65535 None None EuRrn
(Internal planning)

Radio Planning
Valid IP address None None EuRrn
(Internal planning)

None None None N/A EuRrn

 Transport
Valid IP address 0.0.0.0 None Planning(Negotiatio EuRrn
n with the peer)

Radio Planning
Valid IP address None None EuRrn
(Internal planning)

0~127 None None N/A EuRrn

Y, N None None N/A EuRrn

Valid IP address None None N/A EuRrn

1~31 None None N/A EuRrn

NormalReset,
None None N/A EuRrn
PoweroffReset

Available,
None None N/A EuRrn
Unavilable

MainArea,
StandbyArea, None None N/A EuRrn
DownloadArea

0~63 None None N/A EuRrn

1~31 None None N/A EuRrn

Transport
OFF, ON OFF(Off) None Planning(Negotiatio EuRrn
n with the peer)

Radio Planning
INVENTORY, LOG None None EuRrn
(Internal planning)

Radio Planning
L3, L2 L3(L3) None EuRrn
(Internal planning)
 Radio Planning
1~32 1 None EuRrn
(Internal planning)

Radio Planning
1~32 2 None EuRrn
(Internal planning)

Radio Planning
0~3825 300 300 EuRrn
(Internal planning)

Radio Planning
OFF, ON OFF(OFF) None EuRrn
(Internal planning)
 Radio Planning
1~4094 1 None EuRrn
(Internal planning)

Radio Planning
0~7 5 5 EuRrn
(Internal planning)

Radio Planning
0~900 None None EuRrn
(Internal planning)
 Radio Planning
0~128 None None EuRrn
(Internal planning)

Radio Planning
Valid IP address 255.255.255.224 None EuRrn
(Internal planning)

Radio Planning
0~65535 None None EuRrnLanIp
(Internal planning)
 Radio Planning
Valid IP address None None EuRrnLanIp
(Internal planning)

Radio Planning
Valid IP address None None EuRrnLanIp
(Internal planning)

Transport
0~65535 None None Planning(Internal EuRrnPort
planning)

Transport
0~1 None None Planning(Internal EuRrnPort
planning)

Transport
Port 0:On, Port
OFF, ON None Planning(Internal EuRrnPort
1:Off
planning)

Radio Planning
0~65535 None None EuRrnRt
(Internal planning)

Radio Planning
0~65535 None None EuRrnRt
(Internal planning)

Radio Planning
Valid IP address None None EuRrnRt
(Internal planning)

Radio Planning
Valid IP address None None EuRrnRt
(Internal planning)
 Radio Planning
Valid IP address None None EuRrnRt
(Internal planning)

Radio Planning
0~65535 None None EuSubscriber
(Internal planning)

Radio Planning
UE, RRN None None EuSubscriber
(Internal planning)

000000000000000
Radio Planning
~99999999999999 None None EuSubscriber
(Internal planning)
9
000000000000000
Radio Planning
~99999999999999 None None EuSubscriber
(Internal planning)
9

Radio Planning
0~255 None None EuSubscriber
(Internal planning)

0000000000000000
Radio Planning
0000000000000000 None None EuSubscriber
(Internal planning)
~ffffffffffffffffffffffffffffffff
0000000000000000
Radio Planning
0000000000000000 None None EuSubscriber
(Internal planning)
~ffffffffffffffffffffffffffffffff

Radio Planning
1~4294967295 75000000 None EuSubscriber
(Internal planning)

Radio Planning
1~4294967295 150000000 None EuSubscriber
(Internal planning)

Radio Planning
0~65535 None None EuSubscriber
(Internal planning)

Radio Planning
0~79 NULL(empty string) None EuSubscriber
(Internal planning)
 Radio Planning EUSubscriberTempl
0~65535 None None
(Internal planning) ate

Radio Planning EUSubscriberTempl

0~65535 None None
(Internal planning) ate

Radio Planning EUSubscriberTempl

0~16 characters NULL(empty string) None
(Internal planning) ate

DISABLED, DISABLED(DISABL Radio Planning EUSubscriberTempl

None
ENABLED ED) (Internal planning) ate

Radio Planning EUSubscriberTempl

0~65535 0 None
(Internal planning) ate
 Radio Planning
10~254 None None RelayExtendedQci
(Internal planning)

Radio Planning
NO, YES NO(NO) None RelayExtendedQci
(Internal planning)

0~39 5 None Engineering Design RelayExtendedQci

 Radio Planning
PQ, WFQ PQ(PQ) None RelayExtendedQci
(Internal planning)
 Radio Planning
1~100 30 None RelayExtendedQci
(Internal planning)

Radio Planning
1~100 30 None RelayExtendedQci
(Internal planning)
 Radio Planning
0~63 0 None RelayExtendedQci
(Internal planning)

Radio Planning
0~63 63 None RelayExtendedQci
(Internal planning)

0~1, step:0.1 10 10 Engineering Design RelayExtendedQci

L3PQ, L2OM, Radio Planning
L3PQ(L3PQ) None RelayExtendedQci
L2HIGH, L2LOW (Internal planning)
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen
256ms 256ms(256ms) ANRMeasureParam
480ms, 512ms, ded Value
640ms, 1024ms,
1280ms, 2560ms,
5120ms
 Default/Recommen
0~15 2 2 ANRMeasureParam
ded Value
 Default/Recommen
-15~15 0 0 ANRMeasureParam
ded Value
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen
512ms 512ms(512ms) ANRMeasureParam
480ms, 512ms, ded Value
640ms, 1024ms,
1280ms, 2560ms,
5120ms
 Default/Recommen
0~15 2 2 ANRMeasureParam
ded Value
 Default/Recommen
-141~-43 -106 -106 ANRMeasureParam
ded Value

Default/Recommen
0,10~600 0 0 CounterCheckPara
ded Value
 Default/Recommen
0,128~4294967295 0 0 CounterCheckPara
ded Value

OFF, ON OFF(Off) OFF(Off) Engineering Design CounterCheckPara

NULL, Snow3G, AES(AES AES(AES

Engineering Design ENodeBCipherCap
AES, ZUC Algorithm) Algorithm)
NULL, Snow3G, Snow3G(SNOW 3G Snow3G(SNOW 3G
Engineering Design ENodeBCipherCap
AES, ZUC Algorithm) Algorithm)

NULL, Snow3G, ZUC(ZUC ZUC(ZUC

Engineering Design ENodeBCipherCap
AES, ZUC Algorithm) Algorithm)

NULL, Snow3G, NULL(NULL NULL(NULL

Engineering Design ENodeBCipherCap
AES, ZUC Algorithm) Algorithm)
 Default/Recommen ENodeBConnState
1~200 20 20
ded Value Timer
 Default/Recommen ENodeBConnState
1~200 20 20
ded Value Timer
 Default/Recommen ENodeBConnState
1~200 35 35
ded Value Timer

Default/Recommen ENodeBConnState
1~65535 5000 5000
ded Value Timer
 Default/Recommen ENodeBConnState
1~65535 5000 5000
ded Value Timer

Default/Recommen ENodeBConnState
1~65535 10000 10000
ded Value Timer

Default/Recommen ENodeBConnState
1~65535 8000 8000
ded Value Timer
 Default/Recommen ENodeBConnState
1~65535 5000 5000
ded Value Timer

Default/Recommen ENodeBConnState
1~65535 5000 5000
ded Value Timer
 Default/Recommen ENodeBConnState
3~15 15 15
ded Value Timer

Default/Recommen ENodeBConnState
1~200 35 35
ded Value Timer
 Default/Recommen ENodeBConnState
1~200 35 35
ded Value Timer

Default/Recommen ENodeBConnState
0~1000 50 50
ded Value Timer
 Default/Recommen ENodeBConnState
0~1000 35 35
ded Value Timer

Default/Recommen ENodeBConnState
1~200 20 20
ded Value Timer
 Default/Recommen ENodeBConnState
1~200 20 20
ded Value Timer

Default/Recommen ENodeBConnState
1~200 35 35
ded Value Timer
 Default/Recommen ENodeBConnState
0~4000 80 80
ded Value Timer

NULL, Snow3G, AES(AES AES(AES ENodeBIntegrityCa

Engineering Design
AES, ZUC Algorithm) Algorithm) p

NULL, Snow3G, Snow3G(SNOW 3G Snow3G(SNOW 3G ENodeBIntegrityCa

Engineering Design
AES, ZUC Algorithm) Algorithm) p

NULL, Snow3G, ZUC(ZUC ZUC(ZUC ENodeBIntegrityCa

Engineering Design
AES, ZUC Algorithm) Algorithm) p
 Enable(Enable Enable(Enable ENodeBIntegrityCa
Disable, Enable Engineering Design
NULL Algorithm) NULL Algorithm) p

eNodeBUSImeisvCf
0~99999999 None None Engineering Design
g

eNodeBUSImeisvCf
0~99,255 None 255 Engineering Design
g
 eNodeBUSImeisvCf
0~80 None None Engineering Design
g

UsBasedSpecificSP
UsBasedSpecificSP
ID:Off,
ID,
UsBasedSpecificIP
UsBasedSpecificIP
Add:Off, UsBasedSpecificSP Radio Planning
Add, eNodeBUSParaCfg
UsBasedSpecificTr ID (Internal planning)
UsBasedSpecificTr
aceID:Off,
aceID,
UsBasedIMEISV:Of
UsBasedIMEISV
f
 Radio Planning
1~256 256 none eNodeBUSParaCfg
(Internal planning)

Radio Planning
0~3600 30 30 eNodeBUSParaCfg
(Internal planning)

Radio Planning
0~3600 70 70 eNodeBUSParaCfg
(Internal planning)
 Radio Planning
0.001~1, step:0.001 20 20 eNodeBUSParaCfg
(Internal planning)

Radio Planning
1~1000 20 20 eNodeBUSParaCfg
(Internal planning)

Radio Planning
1~1000 20 None eNodeBUSParaCfg
(Internal planning)
 Radio Planning
0~120 0 0 eNodeBUSParaCfg
(Internal planning)
 Radio Planning
OFF, ON OFF(Off) OFF(Off) eNodeBUSParaCfg
(Internal planning)

eNodeBUsTraceIdC
0~23 None None N/A
fg
 eNodeBUsTraceIdC
0~4294967295 None None N/A
fg

OFF, ON OFF(Off) OFF(Off) Engineering Design PdcpRohcPara

U_MODE, O_MODE(Bi- O_MODE(Bi-
O_MODE, directional directional Engineering Design PdcpRohcPara
R_MODE Optimistic Mode) Optimistic Mode)
Profile0x0001, Profile0x0001:On, Profile0x0001:On,
Profile0x0002, Profile0x0002:On, Profile0x0002:On,
Engineering Design PdcpRohcPara
Profile0x0003, Profile0x0003:On, Profile0x0003:On,
Profile0x0004 Profile0x0004:On Profile0x0004:On

PrivateCaBandCom
0~31 None None N/A
b
 PrivateCaBandCom
20~300 None None N/A
b

PrivateCaBandCom
0~31 None None N/A
b
 PrivateCaBandCom
1~256 1 None N/A
b

PrivateCaBandCom
1~256 1 None N/A
b
 PrivateCaBandCom
0~256 0 None N/A
b

PrivateCaBandCom
0~256 0 None N/A
b
 Bandwidth_1_4M:O
n,
Bandwidth_1_4M,
Bandwidth_3M:Off,
Bandwidth_3M,
Bandwidth_5M:Off,
Bandwidth_5M, PrivateCaBandCom
Bandwidth_10M:Off None N/A
Bandwidth_10M, b
,
Bandwidth_15M,
Bandwidth_15M:Off
Bandwidth_20M
,
Bandwidth_20M:Off
 Bandwidth_1_4M:O
n,
Bandwidth_1_4M,
Bandwidth_3M:Off,
Bandwidth_3M,
Bandwidth_5M:Off,
Bandwidth_5M, PrivateCaBandCom
Bandwidth_10M:Off None N/A
Bandwidth_10M, b
,
Bandwidth_15M,
Bandwidth_15M:Off
Bandwidth_20M
,
Bandwidth_20M:Off
 Bandwidth_1_4M:O
ff,
Bandwidth_1_4M,
Bandwidth_3M:Off,
Bandwidth_3M,
Bandwidth_5M:Off,
Bandwidth_5M, PrivateCaBandCom
Bandwidth_10M:Off None N/A
Bandwidth_10M, b
,
Bandwidth_15M,
Bandwidth_15M:Off
Bandwidth_20M
,
Bandwidth_20M:Off
 Bandwidth_1_4M:O
ff,
Bandwidth_1_4M,
Bandwidth_3M:Off,
Bandwidth_3M,
Bandwidth_5M:Off,
Bandwidth_5M, PrivateCaBandCom
Bandwidth_10M:Off None N/A
Bandwidth_10M, b
,
Bandwidth_15M,
Bandwidth_15M:Off
Bandwidth_20M
,
Bandwidth_20M:Off

PrivateCaBandCom
0~256 0 None N/A
b
 Bandwidth_1_4M:O
ff,
Bandwidth_1_4M,
Bandwidth_3M:Off,
Bandwidth_3M,
Bandwidth_5M:Off,
Bandwidth_5M, PrivateCaBandCom
Bandwidth_10M:Off None N/A
Bandwidth_10M, b
,
Bandwidth_15M,
Bandwidth_15M:Off
Bandwidth_20M
,
Bandwidth_20M:Off
NOT_CONFILCT,
CONFILCT_WITH_
PrivateCaBandCom
PRIVATE, None None N/A
b
CONFILCT_WITH_
3GPP

Default/Recommen
1~16 4 4 RrcConnStateTimer
ded Value
min5, min10,
min20, min30, Default/Recommen
min10(10) min10(10) RrcConnStateTimer
min60, min120, ded Value
min180

ms50, ms100,
ms150, ms200, Default/Recommen
ms500(500) ms500(500) RrcConnStateTimer
ms500, ms1000, ded Value
ms2000
ms100, ms200,
ms500, ms1000, Default/Recommen
ms8000(8000) ms8000(8000) RrcConnStateTimer
ms2000, ms4000, ded Value
ms8000

min5, min10,
min20, min30, Default/Recommen
min120(120) min120(120) RrcConnStateTimer
min60, min120, ded Value
min180
 Default/Recommen
0~3600 20 20 RrcConnStateTimer
ded Value
 Default/Recommen
0~3600 180 180 RrcConnStateTimer
ded Value

Default/Recommen
0~15 2 2 RrcConnStateTimer
ded Value
 Default/Recommen
10~3600 200 200 RrcConnStateTimer
ded Value
 Default/Recommen
5~3600 20 20 RrcConnStateTimer
ded Value
 Default/Recommen
0~3600 20 20 RrcConnStateTimer
ded Value
 Default/Recommen
10~3600 200 200 RrcConnStateTimer
ded Value
 Default/Recommen
OFF, ON OFF(OFF) OFF(Off) SrbCfg
ded Value

Default/Recommen
1~49 20 20 SrbCfg
ded Value
m5, m10, m15,
m20, m25, m30,
m35, m40, m45,
m50, m55, m60,
m65, m70, m75,
m80, m85, m90,
m95, m100, m105,
m110, m115, m120,
m125, m130, m135,
Default/Recommen
m140, m145, m150, m200(200ms) m200(200ms) SrbCfg
ded Value
m155, m160, m165,
m170, m175, m180,
m185, m190, m195,
m200, m205, m210,
m215, m220, m225,
m230, m235, m240,
m245, m250, m300,
m350, m400, m450,
m500
 Default/Recommen
0~5000 150 150 SrbCfg
ded Value

0~255 None None N/A TceIpMapping

Transport
IPv4, IPv6 IPv4(IPv4 Address) None Planning(Negotiatio TceIpMapping
n with the peer)
 Transport
Valid IP address 0.0.0.0 None Planning(Negotiatio TceIpMapping
n with the peer)

Transport
Valid IP address 0:0:0:0:0:0:0:0 None Planning(Negotiatio TceIpMapping
n with the peer)

ArpPrioritySchSwitc ArpPrioritySchSwitc ArpPrioritySchSwitc Radio Planning

UserPriority
h h:0 h:0 (Internal planning)
GOLD, SILVER, Radio Planning
GOLD(Gold) GOLD(Gold) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

GOLD(Gold) GOLD(Gold) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

GOLD(Gold) GOLD(Gold) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

GOLD(Gold) GOLD(Gold) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

GOLD(Gold) GOLD(Gold) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

SILVER(Silver) SILVER(Silver) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

SILVER(Silver) SILVER(Silver) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

SILVER(Silver) SILVER(Silver) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

SILVER(Silver) SILVER(Silver) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

SILVER(Silver) SILVER(Silver) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

BRONZE(Bronze) BRONZE(Bronze) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

BRONZE(Bronze) BRONZE(Bronze) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

BRONZE(Bronze) BRONZE(Bronze) UserPriority
BRONZE (Internal planning)
GOLD, SILVER, Radio Planning
BRONZE(Bronze) BRONZE(Bronze) UserPriority
BRONZE (Internal planning)

GOLD, SILVER, Radio Planning

BRONZE(Bronze) BRONZE(Bronze) UserPriority
BRONZE (Internal planning)

QCI6, QCI7, QCI8, Radio Planning

None None UserQciPriority
QCI9 (Internal planning)

QCI6: 1000, QCI7:

Radio Planning
0.001~1, step:0.001 850 950, QCI8: 900, UserQciPriority
(Internal planning)
QCI9: 850

QCI6: 1000, QCI7:

Radio Planning
0.001~1, step:0.001 850 950, QCI8: 900, UserQciPriority
(Internal planning)
QCI9: 850
 QCI6: 800, QCI7:
Radio Planning
0.001~1, step:0.001 650 750, QCI8: 700, UserQciPriority
(Internal planning)
QCI9: 650

QCI6: 800, QCI7:

Radio Planning
0.001~1, step:0.001 650 750, QCI8: 700, UserQciPriority
(Internal planning)
QCI9: 650

QCI6: 600, QCI7:

Radio Planning
0.001~1, step:0.001 450 550, QCI8: 500, UserQciPriority
(Internal planning)
QCI9: 450

QCI6: 600, QCI7:

Radio Planning
0.001~1, step:0.001 450 550, QCI8: 500, UserQciPriority
(Internal planning)
QCI9: 450
 Radio Planning X2AutoSetupOpera
000~999 None None
(Internal planning) tor

Radio Planning X2AutoSetupOpera

00~99,000~999 None None
(Internal planning) tor

0~255 None None Engineering Design CaMgtCfg

Default/Recommen
-140~-43 -109 -109 CaMgtCfg
ded Value
 Default/Recommen
-140~-43 -105 -105 CaMgtCfg
ded Value

Default/Recommen
OFF, ON OFF(Off) OFF(Off) CaMgtCfg
ded Value
 Default/Recommen
0~30 9 9 CaMgtCfg
ded Value

Default/Recommen
1~10 3 3 CaMgtCfg
ded Value
 Default/Recommen
0~300 50 50 CaMgtCfg
ded Value

Default/Recommen
10~1000 100 100 CaMgtCfg
ded Value
 Default/Recommen
-15~15 2 2 CaMgtCfg
ded Value
 Default/Recommen
1~65535 15 15 CaMgtCfg
ded Value
r1, r2, r4, r8, r16, Default/Recommen
r8(8) r8(8) CaMgtCfg
r32, r64, Infinity ded Value
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms, Default/Recommen
10240ms 10240ms CaMgtCfg
5120ms, 10240ms, ded Value
1min, 6min, 12min,
30min, 60min
 Default/Recommen
0~15 0 5 CaMgtCfg
ded Value
 Default/Recommen
5~60 60 None CaMgtCfg
ded Value
 CaDl3CCSwitch:Off CaDl3CCSwitch:Off
, ,
CaDl3CCSwitch, CaUl2CCSwitch:Off CaUl2CCSwitch:Off
CaUl2CCSwitch, , ,
CaDl4CCSwitch, CaDl4CCSwitch:Off CaDl4CCSwitch:Off
InterFddTddCaSwit , ,
ch, InterFddTddCaSwit InterFddTddCaSwit Default/Recommen
CaMgtCfg
Tdd2CCDlCaEnhan ch:Off, ch:Off, ded Value
ceSwitch, Tdd2CCDlCaEnhan Tdd2CCDlCaEnhan
CaDl5CCSwitch, ceSwitch:Off, ceSwitch:Off,
CaInstantlyJudgeS CaDl5CCSwitch:Off CaDl5CCSwitch:Off
witch , ,
CaInstantlyJudgeS CaInstantlyJudgeS
witch:Off witch:On

Default/Recommen
0~2000 20 20 CaMgtCfg
ded Value
 Default/Recommen
0~65535 0 0 CaMgtCfg
ded Value
NOT_CFG, 160ms,
256ms, 320ms, Default/Recommen
NOT_CFG 320ms CaMgtCfg
512ms, 640ms, ded Value
1024ms, 1280ms
 Default/Recommen
0~65535 65535 65535 CaMgtCfg
ded Value
 Radio Planning
0~100 80 None CaMgtCfg
(Internal planning)
 Default/Recommen
-140~-43 -85 None CaMgtCfg
ded Value
NOT_ALLOWED, NOT_ALLOWED(N ALLOWED(Allowed Default/Recommen
CaMgtCfg
ALLOWED ot allowed) ) ded Value
 Default/Recommen
1~65535 1000 1000 CaMgtCfg
ded Value

FREE,
FREE(FREE) FREE(FREE) N/A CaMgtCfg
CONTROLLED
 Default/Recommen
0~65535 1440 1440 CaMgtCfg
ded Value
 Default/Recommen
1~65535 1440 1440 CaMgtCfg
ded Value
 Default/Recommen
0~15 0 5 CaMgtCfg
ded Value

2CC, 3CC, 4CC, Default/Recommen

2CC(2CC) None CaMgtCfg
5CC ded Value

2CC, 3CC, 4CC, Default/Recommen

2CC(2CC) None CaMgtCfg
5CC ded Value
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen
640ms(640) None CaMgtCfg
480ms, 512ms, ded Value
640ms, 1024ms,
1280ms, 2560ms,
5120ms

0ms, 40ms, 64ms,

80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen
640ms(640) None CaMgtCfg
480ms, 512ms, ded Value
640ms, 1024ms,
1280ms, 2560ms,
5120ms
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen
640ms(640) None CaMgtCfg
480ms, 512ms, ded Value
640ms, 1024ms,
1280ms, 2560ms,
5120ms

0ms, 40ms, 64ms,

80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen
640ms(640) None CaMgtCfg
480ms, 512ms, ded Value
640ms, 1024ms,
1280ms, 2560ms,
5120ms
 RAT network and
there are CA-
capable multi-mode
UEs that are
periodically
performing
detection of inter-
RAT signals, set
this parameter
based on the UEs'
detection period of
inter-RAT paging
messages.
For example, if the
operator deploys
both an LTE and a
CDMA2000 network
and there are CA-
capable LTE- Default/Recommen
0~255 0 CaMgtCfg
CDMA2000 dual- ded Value
mode UEs, this
parameter can be
set based on the
UEs's detection
period of
CDMA2000 paging
messages. The
detection period is
usually 40 ms or 80
ms, and therefore
this parameter can
be set to 40 ms or
80 ms in the
preceding scenario.
If the operator
deploys only an
LTE network or
there are no such

Default/Recommen
DL0CC, DL2CC DL0CC(DL0CC) None CaMgtCfg
ded Value

Default/Recommen
2CC, 3CC, 4CC 2CC(2CC) None CaMgtCfg
ded Value
 Default/Recommen
FDD, TDD, NULL NULL(NULL) None CaMgtCfg
ded Value

Default/Recommen
FDD, TDD, NULL NULL(NULL) None CaMgtCfg
ded Value
0~255 None None Engineering Design CellBfMimoParaCfg

NO_ADAPTIVE,
TxD_BF_ADAPTIV MIMO_BF_ADAPTI MIMO_BF_ADAPTI
E, VE(MIMO_BF_ADA VE(MIMO_BF_ADA Engineering Design CellBfMimoParaCfg
MIMO_BF_ADAPTI PTIVE) PTIVE)
VE
TM2, TM3, TM7,
TM8, TM4,
TM3(TM3) TM3(TM3) Engineering Design CellBfMimoParaCfg
TM9w/oPMI,
TM9wPMI
OFF, ON OFF(Off) OFF(Off) Engineering Design CellBfMimoParaCfg
 Radio Planning
-3.37~3.45 0 0 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-7.0~5.0 0 0 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-7.0~5.0 0 0 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-7.0~5.0 0 0 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-7.0~5.0 0 0 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-7.0~5.0 0 0 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-12.8~12.8 127 127 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-12.8~12.8 128 128 (Negotiation with CellBfMimoParaCfg
the peer)
0, 1, 2 0(0) 0(0) Engineering Design CellBfMimoParaCfg

OFF, ON OFF(Off) OFF(Off) Engineering Design CellBfMimoParaCfg

OFF, ON OFF(Off) OFF(Off) Engineering Design CellBfMimoParaCfg
 Radio Planning
0~70 0 0 (Negotiation with CellBfMimoParaCfg
the peer)
OFF, ON OFF(Off) OFF(Off) Engineering Design CellBfMimoParaCfg
 Set this parameter
to ON(On) if the
CrsPortNum
parameter is set to Radio Planning
OFF, ON OFF(Off) CellBfMimoParaCfg
CRS_PORT_4(4 (Internal planning)
ports). Otherwise,
set this parameter
to OFF(Off).

Radio Planning
-3~5 0 0 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-5~5 20 20 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-5~5 0 0 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-12~12 0 0 (Negotiation with CellBfMimoParaCfg
the peer)
 Radio Planning
-12~12 0 0 (Negotiation with CellBfMimoParaCfg
the peer)

0~255 None None Engineering Design CellCqiAdaptiveCfg

OFF, ON ON(On) ON(On) Engineering Design CellCqiAdaptiveCfg

ms2, ms5, ms10,

ms20, ms40, ms80, ms40(40ms) ms40(40ms) Engineering Design CellCqiAdaptiveCfg
ms160
OFF, ON ON(On) ON(On) Engineering Design CellCqiAdaptiveCfg
OFF, ON OFF(Off) OFF(Off) Engineering Design CellCqiAdaptiveCfg

Radio Planning
0~255 None None CellDlCompAlgo
(Internal planning)
 Default/Recommen
-15~15 -12 -12 CellDlCompAlgo
ded Value

Radio Planning
0~255 None None CellDlpcPdschPa
(Internal planning)

Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellDlpcPdschPa
ded Value
DB_6_P_A,
DB_4DOT77_P_A,
Dual-antenna or
DB_3_P_A,
four-antenna:
DB_1DOT77_P_A, Default/Recommen
DB_3_P_A(-3 dB) DB_3_P_A(-3 dB) CellDlpcPdschPa
DB0_P_A, ded Value
Single-antenna:
DB1_P_A,
DB0_P_A(0 dB)
DB2_P_A,
DB3_P_A

Radio Planning
0~255 None None CellDrxPara
(Internal planning)
 Default/Recommen
0~1000 1000 1000 CellDrxPara
ded Value
 Default/Recommen
1~1000 1000 1000 CellDrxPara
ded Value
 Default/Recommen
0~1999 300 300 CellDrxPara
ded Value

Default/Recommen
1~2000 800 800 CellDrxPara
ded Value
 Default/Recommen
0~1999 300 300 CellDrxPara
ded Value

Default/Recommen
1~2000 800 800 CellDrxPara
ded Value
 Default/Recommen
40~6000 30 30 CellDrxPara
ded Value

Default/Recommen
OFF, ON OFF(Off) None CellDrxPara
ded Value

Default/Recommen
40~6000 50 None CellDrxPara
ded Value
 Default/Recommen
0~1999 800 None CellDrxPara
ded Value

Default/Recommen
0~1999 900 None CellDrxPara
ded Value
SF10, SF20, SF32,
SF40, SF64, SF80,
SF128, SF160,
SF1280(1280 SF1280(1280 Default/Recommen
SF256, SF320, CellDrxPara
subframes) subframes) ded Value
SF512, SF640,
SF1024, SF1280,
SF2048, SF2560
OFF, ON OFF(Off) OFF(Off) Engineering Design CellDrxPara
PSF1, PSF2, PSF3,
PSF4, PSF5, PSF6,
PSF8, PSF10,
PSF5(5 PDCCH PSF5(5 PDCCH
PSF20, PSF30, Engineering Design CellDrxPara
subframes) subframes)
PSF40, PSF50,
PSF60, PSF80,
PSF100, PSF200
PSF200, PSF300,
PSF500, PSF750, PSF200(200 PSF200(200
Engineering Design CellDrxPara
PSF1280, PDCCH subframes) PDCCH subframes)
PSF1920, PSF2560
DEFAULT,
QCIPRIORITY, Default/Recommen
DEFAULT(Default) DEFAULT(Default) CellDrxPara
3GPPDEFINEDQCI ded Value
PRIORITY
OFF, ON OFF(Off) OFF(Off) Engineering Design CellDrxPara
OFF, ON OFF(Off) OFF(Off) Engineering Design CellDrxPara
OFF, ON OFF(Off) OFF(Off) Engineering Design CellDrxPara
SF128, SF160,
SF256, SF320,
SF160(160 SF160(160
SF512, SF640, Engineering Design CellDrxPara
subframes) subframes)
SF1024, SF1280,
SF2048, SF2560
PSF1, PSF2, PSF3,
PSF4, PSF5, PSF6,
PSF8, PSF10,
PSF2(2 PDCCH PSF2(2 PDCCH
PSF20, PSF30, Engineering Design CellDrxPara
subframes) subframes)
PSF40, PSF50,
PSF60, PSF80,
PSF100, PSF200
PSF1, PSF2, PSF3,
PSF4, PSF5, PSF6,
PSF8, PSF10,
PSF20, PSF30,
PSF40, PSF50, PSF2(2 PDCCH PSF2(2 PDCCH
Engineering Design CellDrxPara
PSF60, PSF80, subframes) subframes)
PSF100, PSF200,
PSF300, PSF500,
PSF750, PSF1280,
PSF1920, PSF2560
PSF1, PSF2, PSF4,
PSF6, PSF8, PSF4(4 PDCCH PSF4(4 PDCCH
Engineering Design CellDrxPara
PSF16, PSF24, subframes) subframes)
PSF33

OFF, ON OFF(Off) OFF(Off) Engineering Design CellDrxPara

SF2, SF5, SF8,
SF10, SF16, SF20,
SF32, SF40, SF64,
SF20(20 SF20(20
SF80, SF128, Engineering Design CellDrxPara
subframes) subframes)
SF160, SF256,
SF320, SF512,
SF640
1~16 1 1 Engineering Design CellDrxPara
OFF, ON OFF(Off) OFF(Off) Engineering Design CellDrxPara
OFF, ON OFF(Off) OFF(Off) Engineering Design CellDrxPara
OFF, ON OFF(Off) OFF(Off) Engineering Design CellDrxPara
OFF, ON OFF(Off) OFF(Off) Engineering Design CellDrxPara

0~255 None None Engineering Design CellHoParaCfg

 Default/Recommen
-140~-43 -121 -121 CellHoParaCfg
ded Value
 Default/Recommen
-20~-3 -28 -28 CellHoParaCfg
ded Value

Default/Recommen
30~350 60 None CellHoParaCfg
ded Value
BlindHoSwitch BlindHoSwitch:Off BlindHoSwitch:Off Engineering Design CellHoParaCfg

SRVCCWITHPSCS SRVCCWITHPSCS SrvccWithPsCsRetr Radio Planning

CellHoParaCfg
RETRYSWITCH RETRYSWITCH:Off ySwitch:Off (Internal planning)
 Radio Planning
0~28 5 None (Negotiation with CellHoParaCfg
the peer)
 Radio Planning
0~100 20 None (Negotiation with CellHoParaCfg
the peer)
HS_30S, HS_60S,
HS_120S,
HS_180S,
HS_30S(30s) HS_30S(30s) Engineering Design CellHoParaCfg
HS_240S, HS_10S,
HS_15S, HS_20S,
HS_45S
1~16 3 3 Engineering Design CellHoParaCfg
HANDOVER_IMME
DIATELY,
HANDOVER_IMME HANDOVER_IMME Radio Planning
BASED_ON_SIGN
DIATELY(HANDOV DIATELY(HANDOV (Negotiation with CellHoParaCfg
AL_STRENGTH,
ER_IMMEDIATELY) ER_IMMEDIATELY) the peer)
BASED_ON_FREQ
_PRIORITY

Radio Planning
60~1000 100 100 (Negotiation with CellHoParaCfg
the peer)
InterFreqCoverHoS InterFreqCoverHoS InterFreqCoverHoS
witch, witch:On, witch:On,
EmcInterFreqBlind EmcInterFreqBlind EmcInterFreqBlind
HoSwitch, HoSwitch:Off, HoSwitch:Off,
Engineering Design CellHoParaCfg
InterFreqSpeedHoS InterFreqSpeedHoS InterFreqSpeedHoS
witch, witch:Off, witch:Off,
IfCoverPreBlindHoS IfCoverPreBlindHoS IfCoverPreBlindHoS
witch witch:Off witch:Off
1~16 3 3 Engineering Design CellHoParaCfg

HoUseInactiveTime HoUseInactiveTime HoUseInactiveTime Radio Planning

CellHoParaCfg
rSwitch rSwitch:Off rSwitch:Off (Internal planning)
 Radio Planning
0~50 0 0 CellHoParaCfg
(Internal planning)
 Default/Recommen
1~60 30 30 CellHoParaCfg
ded Value

0~255 None None Engineering Design CellMimoParaCfg

NO_ADAPTIVE,
OL_ADAPTIVE, OL_ADAPTIVE(OL OL_ADAPTIVE(OL
Engineering Design CellMimoParaCfg
CL_ADAPTIVE, _ADAPTIVE) _ADAPTIVE)
OC_ADAPTIVE
TM2, TM3, TM4,
TM3(TM3) TM3(TM3) Engineering Design CellMimoParaCfg
TM6
 ADAPTIVE(ADAPTI ADAPTIVE(ADAPTI
TM2, ADAPTIVE Engineering Design CellMimoParaCfg
VE) VE)

0~255 None None Engineering Design CellMlbHo

RESELBASED, RESELBASED(RE
None N/A CellMlbHo
MLBPRIOBASED SELPRIOBASED)
PROTECTTIMERM PROTECTTIMERM
ODE, ODE:Off,
None N/A CellMlbHo
SPECEVENTA1A2 SPECEVENTA1A2
MODE MODE:Off
0~3600 0 None N/A CellMlbHo

-140~-43 -105 None N/A CellMlbHo

-20~-3 -20 None N/A CellMlbHo

-140~-43 -109 None N/A CellMlbHo

-20~-3 -24 None N/A CellMlbHo

Radio Planning
UtranRedirectIMMC UtranRedirectIMMC UtranRedirectIMMC
(Negotiation with CellMlbHo
I I:Off I:Off
the peer)
HoAdmitSwitch, HoAdmitSwitch:On, HoAdmitSwitch:On, Radio Planning
X2RoHoAdmitSwitc X2RoHoAdmitSwitc X2RoHoAdmitSwitc (Negotiation with CellMlbHo
h h:Off h:Off the peer)

Radio Planning
0~255 None None CellOpHoCfg
(Internal planning)

0~5 None None Engineering Design CellOpHoCfg

UTRAN, GERAN, Default/Recommen
UTRAN UTRAN CellOpHoCfg
CDMA2000 ded Value

UTRAN, GERAN, Default/Recommen

GERAN GERAN CellOpHoCfg
CDMA2000, NULL ded Value
UTRAN, GERAN, Default/Recommen
CDMA2000 CDMA2000 CellOpHoCfg
CDMA2000, NULL ded Value

UTRAN, GERAN, Default/Recommen

UTRAN UTRAN CellOpHoCfg
CDMA2000 ded Value
UTRAN, GERAN, Default/Recommen
GERAN GERAN CellOpHoCfg
CDMA2000, NULL ded Value

UTRAN, GERAN, Default/Recommen

CDMA2000 CDMA2000 CellOpHoCfg
CDMA2000, NULL ded Value
 Radio Planning
0~255 None None CellPreallocGroup
(Internal planning)

0~9 None None Engineering Design CellPreallocGroup

OFF, ON ON(On) ON(On) Engineering Design CellPreallocGroup

OFF, ON OFF(Off) OFF(Off) Engineering Design CellPreallocGroup

1~40 5 5 Engineering Design CellPreallocGroup

45~1500 80 80 Engineering Design CellPreallocGroup

0~2000 0 50 Engineering Design CellPreallocGroup

0~255 None None Engineering Design CellSrsAdaptiveCfg

OFF, ON ON(On) ON(On) Engineering Design CellSrsAdaptiveCfg

ms5, ms10, ms20,

ms40, ms80, ms40(40ms) ms40(40ms) Engineering Design CellSrsAdaptiveCfg
ms160, ms320

CellUeMeasControl
0~255 None None Engineering Design
Cfg
 Default/Recommen CellUeMeasControl
1~32 7 7
ded Value Cfg
 Default/Recommen CellUeMeasControl
1~8 3 3
ded Value Cfg
 Default/Recommen CellUeMeasControl
1~8 3 3
ded Value Cfg
 Default/Recommen CellUeMeasControl
1~16 3 3
ded Value Cfg
 Default/Recommen CellUeMeasControl
1~16 3 3
ded Value Cfg
 Default/Recommen CellUeMeasControl
1~64 32 32
ded Value Cfg

Radio Planning
0~255 None None CellUlCompAlgo
(Internal planning)
 Default/Recommen
-15~15 -20 -20 CellUlCompAlgo
ded Value

Radio Planning
-15~15 -8 -8 CellUlCompAlgo
(Internal planning)
 Default/Recommen
-15~15 -6 -6 CellUlCompAlgo
ded Value

Radio Planning
0~255 None None CellUlpcDedic
(Internal planning)

UU_DISABLE, UU_DISABLE(Disa UU_DISABLE(Disa Default/Recommen

CellUlpcDedic
UU_ENABLE ble) ble) ded Value
-10.5,-9,-7.5,-6,-
4.5,-3,- Default/Recommen
-30 -30 CellUlpcDedic
1.5,0,1.5,3,4.5,6,7.5 ded Value
,9,10.5,12

-3,-2,-
Default/Recommen
1,0,1,2,3,4,5,6,7,8,9 -30 -30 CellUlpcDedic
ded Value
,10,11,12
UU_FC0_FILTER_
COEFF,
UU_FC1_FILTER_
COEFF,
UU_FC2_FILTER_
COEFF,
UU_FC3_FILTER_
COEFF,
UU_FC4_FILTER_
COEFF,
UU_FC5_FILTER_
COEFF,
UU_FC6_FILTER_
COEFF,
UU_FC6_FILTER_ UU_FC6_FILTER_
UU_FC7_FILTER_ Default/Recommen
COEFF(UU_FC6_F COEFF(UU_FC6_F CellUlpcDedic
COEFF, ded Value
ILTER_COEFF) ILTER_COEFF)
UU_FC8_FILTER_
COEFF,
UU_FC9_FILTER_
COEFF,
UU_FC11_FILTER_
COEFF,
UU_FC13_FILTER_
COEFF,
UU_FC15_FILTER_
COEFF,
UU_FC17_FILTER_
COEFF,
UU_FC19_FILTER_
COEFF

0~255 None None Engineering Design DistBasedHO

EUTRAN:Off,
EUTRAN, GERAN, EUTRAN:Off,GERA
GERAN:Off, Engineering Design DistBasedHO
UTRAN N:Off,UTRAN:Off
UTRAN:Off
100~100000 10 10 Engineering Design DistBasedHO

Radio Planning
0~255 None None DrxParaGroup
(Internal planning)

0~9 None None Engineering Design DrxParaGroup

 QCI 1 and QCI 5:
ON(On)
QCI 2 and QCI 3:
OFF(Off)
OFF, ON OFF(Off) Engineering Design DrxParaGroup
QCI 4 and QCI 7:
ON(On)
QCI 6, QCI 8, and
QCI 9: ON(On)
 QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 2:
PSF4(4 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 3:
PSF4(4 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
PSF1, PSF2, PSF3, configuration 4:
PSF4, PSF5, PSF6, PSF4(4 PDCCH
PSF8, PSF10, subframes)
PSF2(2 PDCCH
PSF20, PSF30, QCI 6, QCI 8, and Engineering Design DrxParaGroup
subframes)
PSF40, PSF50, QCI 9 for TDD in
PSF60, PSF80, subframe
PSF100, PSF200 configuration 5:
PSF4(4 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 6:
PSF2(2 PDCCH
subframes)
TDD with energy
saving preferentially
considered:
QCI 1 and QCI 5 for
TDD in subframe
configuration 0:
PSF4(4 PDCCH
 configuration 3:
PSF6(6 PDCCH
subframes)
QCI 1 and QCI 5 for
TDD in uplink-
downlink
configuration 4:
PSF8(8 PDCCH
subframes)
QCI 1 and QCI 5 for
TDD in uplink-
downlink
configuration 5:
PSF10(10 PDCCH
PSF1, PSF2, PSF3, subframes)
PSF4, PSF5, PSF6, QCI 1 and QCI 5 for
PSF8, PSF10, TDD in uplink-
PSF20, PSF30, downlink
PSF40, PSF50, PSF80(80 PDCCH configuration 6:
Engineering Design DrxParaGroup
PSF60, PSF80, subframes) PSF3(3 PDCCH
PSF100, PSF200, subframes)
PSF300, PSF500, QCI 4 and QCI 7 for
PSF750, PSF1280, TDD in uplink-
PSF1920, PSF2560 downlink
configurations 0 to
6: PSF80(80
PDCCH subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
uplink-downlink
configurations 0 to
6: PSF80(80
PDCCH subframes)
TDD with energy
saving preferentially
considered:
QCI 1 and QCI 5 for
TDD in uplink-
 QCI 1: PSF8(8
PDCCH subframes)
QCI 4 and QCI 7:
PSF1, PSF2, PSF4,
PSF8(8 PDCCH
PSF6, PSF8, PSF8(8 PDCCH
subframes) Engineering Design DrxParaGroup
PSF16, PSF24, subframes)
QCI 5, QCI 6, QCI
PSF33
8, and QCI 9:
PSF8(8 PDCCH
subframes)
 considered:
QCI 1 with downlink
semi-persistent
scheduling enabled:
SF20(20
subframes)
QCI 1 with downlink
semi-persistent
scheduling
disabled: SF40(40
subframes)
QCI 4 and QCI 7:
SF80(80
subframes)
QCI 5, QCI 6, QCI
8, and QCI 9:
SF10, SF20, SF32,
SF320(320
SF40, SF64, SF80,
subframes)
SF128, SF160,
SF40(40 TDD with
SF256, SF320, Engineering Design DrxParaGroup
subframes) performance
SF512, SF640,
preferentially
SF1024, SF1280,
considered:
SF2048, SF2560
QCI 1 and QCI 5 for
TDD in uplink-
downlink
configurations 0 to
6: SF20(20
subframes)
QCI 4 and QCI 7 for
TDD in uplink-
downlink
configurations 0 to
6: SF40(40
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
uplink-downlink
configurations 0 to

QCI 1 and QCI 5:

UU_DISABLE(Disa
ble)
QCI 2 and QCI 3:
UU_DISABLE(Disa
ble)
UU_DISABLE, UU_ENABLE(Enabl
QCI 4 and QCI 7: Engineering Design DrxParaGroup
UU_ENABLE e)
UU_ENABLE(Enabl
e)
QCI 6, QCI 8, and
QCI 9:
UU_ENABLE(Enabl
e)
 QCI 5, QCI 6, QCI
8, and QCI 9:
SF20(20
subframes)
FDD with energy
saving preferentially
considered:
QCI 4 and QCI 7:
SF20(20
subframes)
QCI 5, QCI 6, QCI
8, and QCI 9:
SF80(80
subframes)
TDD with
performance
SF2, SF5, SF8,
preferentially
SF10, SF16, SF20,
considered:
SF32, SF40, SF64,
SF20(20 QCI 4 and QCI 7 for
SF80, SF128, Engineering Design DrxParaGroup
subframes) TDD in uplink-
SF160, SF256,
downlink
SF320, SF512,
configurations 0 to
SF640
6: SF20(20
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
uplink-downlink
configurations 0 to
6: SF20(20
subframes)
TDD with energy
saving preferentially
considered:
QCI 4 and QCI 7 for
TDD in uplink-
downlink
configurations 0 to
6: SF20(20
 FDD with
performance
preferentially
considered:
QCI 4 and QCI 7: 1
QCI 6, QCI 8, and
QCI 9: 1
FDD with energy
saving preferentially
considered:
QCI 4 and QCI 7: 1
QCI 6, QCI 8, and
QCI 9: 1
TDD with
performance
preferentially
considered:
QCI 4 and QCI 7 for
TDD in subframe
1~16 1 Engineering Design DrxParaGroup
configuration 0 to 6:
1
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 0 to 6:
1
TDD with energy
saving preferentially
considered:
QCI 4 and QCI 7 for
TDD in subframe
configuration 0 to 6:
1
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 0 to 6:
1

Radio Planning
0~255 None None GeranInterfArfcn
(Internal planning)
 Radio Planning
0~1023 None None GeranInterfArfcn
(Internal planning)

GSM_dcs1800,
GSM_dcs1800 None Engineering Design GeranInterfArfcn
GSM_pcs1900

InterRatHoCommGr
0~255 None None Engineering Design
oup
 InterRatHoCommGr
0~9 None None Engineering Design
oup

Default/Recommen InterRatHoCommGr
0~15 2 2
ded Value oup
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen InterRatHoCommGr
640ms 640ms
480ms, 512ms, ded Value oup
640ms, 1024ms,
1280ms, 2560ms,
5120ms

Default/Recommen InterRatHoCommGr
-140~-43 -111 -111
ded Value oup
 Default/Recommen InterRatHoCommGr
-20~-3 -20 -20
ded Value oup

Default/Recommen InterRatHoCommGr
-140~-43 -115 -115
ded Value oup

Default/Recommen InterRatHoCommGr
-20~-3 -24 -24
ded Value oup
 Default/Recommen InterRatHoCommGr
-140~-43 -115 -115
ded Value oup

Default/Recommen InterRatHoCommGr
-20~-3 -24 -24
ded Value oup
 Default/Recommen InterRatHoCommGr
-140~-43 -115 -115
ded Value oup

Default/Recommen InterRatHoCommGr
-20~-3 -24 -24
ded Value oup
 InterRatHoCdma1x
0~255 None None Engineering Design
RttGroup

InterRatHoCdma1x
0~9 None None Engineering Design
RttGroup
 Default/Recommen InterRatHoCdma1x
0~15 2 2
ded Value RttGroup

Default/Recommen InterRatHoCdma1x
-31.5~0 -28 -28
ded Value RttGroup
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen InterRatHoCdma1x
640ms 640ms
480ms, 512ms, ded Value RttGroup
640ms, 1024ms,
1280ms, 2560ms,
5120ms

Default/Recommen InterRatHoCdma1x
-31.5~0 -24 -24
ded Value RttGroup
 RlfTimerConstGrou
0~255 None None Engineering Design
p

RlfTimerConstGrou
0~9 None None Engineering Design
p

MS100_T301,
MS200_T301,
MS300_T301,
MS400_T301, MS200_T301(200m MS200_T301(200m Default/Recommen RlfTimerConstGrou
MS600_T301, s) s) ded Value p
MS1000_T301,
MS1500_T301,
MS2000_T301
 QCI 1:
MS200_T310(200m
s)
QCI 2:
MS1000_T310(100
0ms)
QCI 3:
MS1000_T310(100
0ms)
QCI 4:
MS0_T310, MS1000_T310(100
MS50_T310, 0ms)
MS100_T310, QCI 5:
MS1000_T310(100 Default/Recommen RlfTimerConstGrou
MS200_T310, MS1000_T310(100
0ms) ded Value p
MS500_T310, 0ms)
MS1000_T310, QCI 6:
MS2000_T310 MS1000_T310(100
0ms)
QCI 7:
MS1000_T310(100
0ms)
QCI 8:
MS1000_T310(100
0ms)
QCI 9:
MS1000_T310(100
0ms)

MS1000_T311,
MS3000_T311,
MS5000_T311,
MS10000_T311(10 MS10000_T311(10 Default/Recommen RlfTimerConstGrou
MS10000_T311,
000ms) 000ms) ded Value p
MS15000_T311,
MS20000_T311,
MS30000_T311

QCI 1: n6(6)
QCI 2: n10(10)
QCI 3: n10(10)
QCI 4: n10(10)
n1, n2, n3, n4, n6, Default/Recommen RlfTimerConstGrou
n10(10) QCI 5: n10(10)
n8, n10, n20 ded Value p
QCI 6: n10(10)
QCI 7: n10(10)
QCI 8: n10(10)
QCI 9: n10(10)
 QCI 1: n5(5)
QCI 2: n1(1)
QCI 3: n1(1)
QCI 4: n1(1)
n1, n2, n3, n4, n5, Default/Recommen RlfTimerConstGrou
n1(1) QCI 5: n1(1)
n6, n8, n10 ded Value p
QCI 6: n1(1)
QCI 7: n1(1)
QCI 8: n1(1)
QCI 9: n1(1)

10~254 None None Engineering Design CellExtendedQci

0~255 None None Engineering Design CellExtendedQci

Default/Recommen
0~9 0 None CellExtendedQci
ded Value

Default/Recommen
0~9 0 None CellExtendedQci
ded Value
 Default/Recommen
0~9 0 None CellExtendedQci
ded Value

Default/Recommen
0~9 0 None CellExtendedQci
ded Value

Default/Recommen
0~9 0 None CellExtendedQci
ded Value

Default/Recommen
0~9 0 None CellExtendedQci
ded Value

0~9 0 None Engineering Design CellExtendedQci

0~9 0 None Engineering Design CellExtendedQci

NOT_CFG(NOT_C
NOT_CFG, CFG None Engineering Design CellExtendedQci
FG)

0~9 0 None Engineering Design CellExtendedQci

QCI(1, 5): 10000

0~65000 30000 QCI(2, 3, 4, 6, 7, 8, Engineering Design CellExtendedQci
9): 30000
 Radio Planning
0~255 None None CellStandardQci
(Internal planning)

QCI1, QCI2, QCI3,

QCI4, QCI5, QCI6, None None Engineering Design CellStandardQci
QCI7, QCI8, QCI9

0~9 0 None Engineering Design CellStandardQci

0~9 0 None Engineering Design CellStandardQci

0~9 0 None Engineering Design CellStandardQci

0~9 0 None Engineering Design CellStandardQci

0~9 0 None Engineering Design CellStandardQci

0~9 0 None Engineering Design CellStandardQci

0~9 0 None Engineering Design CellStandardQci

0~9 0 None Engineering Design CellStandardQci

ms5, ms10, ms20,

ms10(SRI 10ms) None Engineering Design CellStandardQci
ms40, ms80

NOT_CFG(NOT_C
NOT_CFG, CFG None Engineering Design CellStandardQci
FG)

0~9 0 None Engineering Design CellStandardQci

 QCI(1, 5): 10000
0~65000 30000 QQCI(2, 3, 4, 6, 7, Engineering Design CellStandardQci
8, 9): 30000

1~9 9 None Engineering Design CellStandardQci

0~9,255 255 None N/A CellStandardQci

0~9,255 255 None Engineering Design CellStandardQci

QCI 1:2, QCI 2:4,

QCI 3:3, QCI 4:5,
1~9 9 QCI 5:1, QCI Engineering Design CellStandardQci
6:6,QCI 7:7, QCI
8:8, QCI 9:9
 INTER_FREQ_MLB
INTER_FREQ_MLB _ALLOWED:On
INTER_FREQ_MLB _ALLOWED:On, INTER_FREQ_MLB
_ALLOWED, INTER_FREQ_MLB _LOW_PRIO_IND:
INTER_FREQ_MLB _LOW_PRIO_IND: Off
_LOW_PRIO_IND, Off, INTER_RAT_MLB_
INTER_RAT_MLB_ INTER_RAT_MLB_ ALLOWED:Off Default/Recommen
CellStandardQci
ALLOWED, ALLOWED:On, INTER_RAT_MLB_ ded Value
INTER_RAT_MLB_ INTER_RAT_MLB_ LOW_PRIO_IND:Of
LOW_PRIO_IND, LOW_PRIO_IND:Of f
HO_USE_VOIP_FR f, HO_USE_VOIP_FR
EQ_ALLOWED HO_USE_VOIP_FR EQ_ALLOWED:On
EQ_ALLOWED:Off for QCI 1 and Off
for QCIs 2 to 9

0~9 0 None Engineering Design CellStandardQci

0~9 0 None Engineering Design CellStandardQci

0~9 0 None Engineering Design CellStandardQci

InterRatHoCdmaHr
0~255 None None Engineering Design
pdGroup

InterRatHoCdmaHr
0~9 None None Engineering Design
pdGroup
 Default/Recommen InterRatHoCdmaHr
0~15 2 2
ded Value pdGroup

Default/Recommen InterRatHoCdmaHr
-31.5~0 -14 -14
ded Value pdGroup
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen InterRatHoCdmaHr
640ms 640ms
480ms, 512ms, ded Value pdGroup
640ms, 1024ms,
1280ms, 2560ms,
5120ms

Default/Recommen InterRatHoCdmaHr
-31.5~0 -10 -10
ded Value pdGroup
 Default/Recommen InterRatHoCdmaHr
-140~-43 -113 -113
ded Value pdGroup

Default/Recommen InterRatHoCdmaHr
-20~-3 -14 -14
ded Value pdGroup

Default/Recommen InterRatHoCdmaHr
-140~-43 -120 -120
ded Value pdGroup

Default/Recommen InterRatHoCdmaHr
-20~-3 -14 -14
ded Value pdGroup

Radio Planning QCIEUTRANRELA

0~255 None None
(Internal planning) TION
0~46589,54436~65 Radio Planning QCIEUTRANRELA
None None
535 (Internal planning) TION

QCIEUTRANRELA
0~9 None None Engineering Design
TION

QCIEUTRANRELA
MlbTargetInd MlbTargetInd:On None Engineering Design
TION
 Radio Planning QCIGERANRELATI
0~255 None None
(Internal planning) ON

Radio Planning QCIGERANRELATI

0~31 None None
(Internal planning) ON

QCIGERANRELATI
0~9 None None Engineering Design
ON
 QCIGERANRELATI
MlbTargetInd MlbTargetInd:On None Engineering Design
ON

Radio Planning QCIUTRANRELATI

0~255 None None
(Internal planning) ON

Radio Planning QCIUTRANRELATI

0~16383 None None
(Internal planning) ON
 QCIUTRANRELATI
0~9 None None Engineering Design
ON

QCIUTRANRELATI
MlbTargetInd MlbTargetInd:On None Engineering Design
ON

InterRatHoGeranGr
0~255 None None Engineering Design
oup
 InterRatHoGeranGr
0~9 None None Engineering Design
oup

Default/Recommen InterRatHoGeranGr
0~15 2 2
ded Value oup
 Default/Recommen InterRatHoGeranGr
-110~-48 -100 -100
ded Value oup

0ms, 40ms, 64ms,

80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen InterRatHoGeranGr
640ms 640ms(640ms)
480ms, 512ms, ded Value oup
640ms, 1024ms,
1280ms, 2560ms,
5120ms
 Default/Recommen InterRatHoGeranGr
-110~-48 -98 -98
ded Value oup

InterRatHoUtranGro
0~255 None None Engineering Design
up

InterRatHoUtranGro
0~9 None None Engineering Design
up
 Default/Recommen InterRatHoUtranGro
-24~0 -24 -24
ded Value up

Default/Recommen InterRatHoUtranGro
-120~-25 -103 -103
ded Value up
 Default/Recommen InterRatHoUtranGro
0~15 0 0
ded Value up
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen InterRatHoUtranGro
320ms 320ms(320ms)
480ms, 512ms, ded Value up
640ms, 1024ms,
1280ms, 2560ms,
5120ms
 Default/Recommen InterRatHoUtranGro
-24~0 -18 -18
ded Value up

Default/Recommen InterRatHoUtranGro
-120~-25 -101 -101
ded Value up
0~255 None None Engineering Design CaGroupSCellCfg

Default/Recommen
0~1048575 None None CaGroupSCellCfg
ded Value
 Default/Recommen
0~255 None None CaGroupSCellCfg
ded Value

Default/Recommen
FALSE, TRUE FALSE(FALSE) None CaGroupSCellCfg
ded Value
 Default/Recommen
0~7 1 None CaGroupSCellCfg
ded Value

Default/Recommen
-35~62 0 None CaGroupSCellCfg
ded Value
 Default/Recommen
-31~66 0 None CaGroupSCellCfg
ded Value

Default/Recommen
0~255,65535 65535 65535 CaGroupSCellCfg
ded Value
0~255 None None Engineering Design CellMcPara

Default/Recommen
-15~15 -13 -13 CellMcPara
ded Value

Default/Recommen
0~15 4 4 CellMcPara
ded Value
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen
640ms 640ms CellMcPara
480ms, 512ms, ded Value
640ms, 1024ms,
1280ms, 2560ms,
5120ms

Default/Recommen
1~8 8 8 CellMcPara
ded Value
r1, r2, r4, r8, r16, Default/Recommen
Infinity(Infinity) Infinity(Infinity) CellMcPara
r32, r64, Infinity ded Value

120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms, Default/Recommen
5120ms 5120ms CellMcPara
5120ms, 10240ms, ded Value
1min, 6min, 12min,
30min, 60min
SAME_AS_TRIG_ Default/Recommen
BOTH BOTH CellMcPara
QUAN, BOTH ded Value

Default/Recommen
RSRP, RSRQ RSRP RSRP CellMcPara
ded Value
 Default/Recommen
-15~15 -13 -13 CellMcPara
ded Value

Default/Recommen
1~8 6 6 CellMcPara
ded Value
 Default/Recommen
RSRP, RSRQ RSRP(RSRP) RSRP CellMcPara
ded Value
SAME_AS_TRIG_ Default/Recommen
BOTH(Both) BOTH CellMcPara
QUAN, BOTH ded Value
 Default/Recommen
1~8 3 3 CellMcPara
ded Value

Default/Recommen
RSRP, RSRQ RSRP(RSRP) RSRP CellMcPara
ded Value
SAME_AS_TRIG_ Default/Recommen
BOTH(Both) BOTH CellMcPara
QUAN, BOTH ded Value
UlCoMPA3RptInterv UlCoMPA3RptInterv UlCoMPA3RptInterv Default/Recommen
CellMcPara
alAdapt alAdapt:Off alAdapt:Off ded Value

0~255 None None Engineering Design InterFreqHoGroup

0~9 None None Engineering Design InterFreqHoGroup

Default/Recommen
0~15 2 2 InterFreqHoGroup
ded Value
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen
640ms 640ms InterFreqHoGroup
480ms, 512ms, ded Value
640ms, 1024ms,
1280ms, 2560ms,
5120ms

Default/Recommen
-140~-43 -105 -105 InterFreqHoGroup
ded Value
 Default/Recommen
-20~-3 -20 -20 InterFreqHoGroup
ded Value

Default/Recommen
-140~-43 -109 -109 InterFreqHoGroup
ded Value
 Default/Recommen
-20~-3 -24 -24 InterFreqHoGroup
ded Value

Default/Recommen
0~15 2 2 InterFreqHoGroup
ded Value
 Default/Recommen
-140~-43 -105 -105 InterFreqHoGroup
ded Value

Default/Recommen
-20~-3 -20 -20 InterFreqHoGroup
ded Value
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen
640ms 640ms InterFreqHoGroup
480ms, 512ms, ded Value
640ms, 1024ms,
1280ms, 2560ms,
5120ms

Default/Recommen
-140~-43 -103 -103 InterFreqHoGroup
ded Value
 Default/Recommen
-20~-3 -18 -18 InterFreqHoGroup
ded Value

Default/Recommen
-140~-43 -85 -85 InterFreqHoGroup
ded Value

Default/Recommen
-20~-3 -16 -16 InterFreqHoGroup
ded Value
 Default/Recommen
-15~15 2 2 InterFreqHoGroup
ded Value

Default/Recommen
-140~-43 -95 -95 InterFreqHoGroup
ded Value
 Default/Recommen
-140~-43 -99 -99 InterFreqHoGroup
ded Value

Default/Recommen
-140~-43 -87 -87 InterFreqHoGroup
ded Value

Default/Recommen
-20~-3 -20 -20 InterFreqHoGroup
ded Value
-141~-43 -90 -90 N/A InterFreqHoGroup

Default/Recommen
-140~-43 -109 -109 InterFreqHoGroup
ded Value
 Default/Recommen
-20~-3 -24 -24 InterFreqHoGroup
ded Value

Radio Planning
-140~-43 -130 -130 InterFreqHoGroup
(Internal planning)
 Radio Planning
-20~-3 -36 -36 InterFreqHoGroup
(Internal planning)
 Default/Recommen
-140~-43 -43 None InterFreqHoGroup
ded Value
 Default/Recommen
-20~-3 -24 None InterFreqHoGroup
ded Value
 Radio Planning
-20~20 0 None (Negotiation with InterFreqHoGroup
the peer)

Default/Recommen
-20~-3 -20 -20 InterFreqHoGroup
ded Value
 Default/Recommen
-20~-3 -24 -24 InterFreqHoGroup
ded Value

Default/Recommen
-140~-43 -103 -103 InterFreqHoGroup
ded Value

Default/Recommen
-20~-3 -18 -18 InterFreqHoGroup
ded Value
0~255 None None Engineering Design IntraFreqHoGroup

0~9 None None Engineering Design IntraFreqHoGroup

Default/Recommen
0~15 2 2 IntraFreqHoGroup
ded Value
 Default/Recommen
-15~15 2 2 IntraFreqHoGroup
ded Value

0ms, 40ms, 64ms,

80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Default/Recommen
320ms 320ms IntraFreqHoGroup
480ms, 512ms, ded Value
640ms, 1024ms,
1280ms, 2560ms,
5120ms
 Radio Planning eNBCellQciRsvdPa
0~255 None None
(Internal planning) ra

Radio Planning eNBCellQciRsvdPa

1~9 None None
(Internal planning) ra

Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit8:
0,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit9:
1,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
2,
0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
3,
1:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
4,
2:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
5,
3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
6,
4:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
7,
5:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
8,
6:Off, eNBCellQciRsvdPa
RsvdSwPara0_bit1 None Engineering Design
RsvdSwPara0_bit1 ra
9,
7:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
0,
8:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
1,
9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
2,
0:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
3,
1:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
4,
2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
5,
3:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
6,
4:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
7,
5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
 Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit8:
0,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit9:
1,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
2,
0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
3,
1:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
4,
2:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
5,
3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
6,
4:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
7,
5:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
8,
6:Off, eNBCellQciRsvdPa
RsvdSwPara1_bit1 None Engineering Design
RsvdSwPara1_bit1 ra
9,
7:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
0,
8:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
1,
9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
2,
0:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
3,
1:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
4,
2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
5,
3:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
6,
4:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
7,
5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
 On,
RsvdSwPara2_bit1
RsvdSwPara2_bit8:
0,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit9:
1,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
2,
0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
3,
1:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
4,
2:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
5,
3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
6,
4:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
7,
5:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
8,
6:On, eNBCellQciRsvdPa
RsvdSwPara2_bit1 None Engineering Design
RsvdSwPara2_bit1 ra
9,
7:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
0,
8:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
1,
9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
2,
0:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
3,
1:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
4,
2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
5,
3:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
6,
4:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
7,
5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2

eNBCellQciRsvdPa
0~4294967295 0 None Engineering Design
ra
 eNBCellQciRsvdPa
0~4294967295 0 None Engineering Design
ra

eNBCellQciRsvdPa
0~4294967295 0 None Engineering Design
ra
 eNBCellQciRsvdPa
0~4294967295 0 None Engineering Design
ra

eNBCellQciRsvdPa
0~65535 0 None Engineering Design
ra
 eNBCellQciRsvdPa
0~65535 0 None Engineering Design
ra

eNBCellQciRsvdPa
0~65535 0 None Engineering Design
ra
 eNBCellQciRsvdPa
0~65535 0 None Engineering Design
ra

eNBCellQciRsvdPa
0~65535 0 None Engineering Design
ra
 eNBCellQciRsvdPa
0~65535 0 None Engineering Design
ra

eNBCellQciRsvdPa
0~65535 0 None Engineering Design
ra
 eNBCellQciRsvdPa
0~65535 0 None Engineering Design
ra

eNBCellQciRsvdPa
0~255 0 None Engineering Design
ra
 eNBCellQciRsvdPa
0~255 0 None Engineering Design
ra

eNBCellQciRsvdPa
0~255 0 None Engineering Design
ra
 eNBCellQciRsvdPa
0~255 0 None Engineering Design
ra

eNBCellQciRsvdPa
0~255 0 None Engineering Design
ra
 eNBCellQciRsvdPa
0~255 0 None Engineering Design
ra

eNBCellQciRsvdPa
0~255 0 None Engineering Design
ra
 eNBCellQciRsvdPa
0~255 0 None Engineering Design
ra

Radio Planning
0~5 None None CnOperator
(Internal planning)

1~32 characters None None Engineering Design CnOperator

CNOPERATOR_PR
IMARY, Radio Planning
None None CnOperator
CNOPERATOR_SE (Internal planning)
CONDARY
 Radio Planning
000~999 None None CnOperator
(Internal planning)

Radio Planning
00~99,000~999 None None CnOperator
(Internal planning)

Radio Planning
0~65535 None None CnOperatorIpPath
(Internal planning)

Radio Planning
0~5 None None CnOperatorIpPath
(Internal planning)
 Radio Planning
0~65535 None None CnOperatorTa
(Internal planning)

Radio Planning
0~5 None None CnOperatorTa
(Internal planning)

Radio Planning
1~65533,65535 None None CnOperatorTa
(Internal planning)

Radio Planning
0~5 None None CnOpSharingGroup
(Internal planning)
 Radio Planning
0~5 None None CnOpSharingGroup
(Internal planning)

Radio Planning
0~5 None None CnOpSharingGroup
(Internal planning)

Radio Planning
0~5 None None CnOpSharingGroup
(Internal planning)

Radio Planning
0~5 None None Emc
(Internal planning)
OFF, ON OFF(Off) None Engineering Design Emc
OFF, ON OFF(Off) None Engineering Design Emc
1~15 1 1 Engineering Design Emc
1~15 1 1 Engineering Design Emc
ALL_OUTPUT,
ABNORMAL_ALL_
ABNORMAL_NOR
NORMAL_SAMPLE eNodeBChrOutput
MAL_SAMPLE, None Engineering Design
(Abnormal All Ctrl
ABNORMAL_ALL_
Normal Sample)
NORMAL_SAMPLE
 eNodeBChrOutput
0~100 90 None Engineering Design
Ctrl
 eNodeBChrOutput
0~65535 4000 None Engineering Design
Ctrl

FIXED_TIME, FIXED_TIME(Fixed eNodeBChrOutput

0 Engineering Design
NON_FIXED_TIME Time) Ctrl
INDEPENDENT,
SHARED_FREQ, INDEPENDENT(Ind
Radio Planning ENodeBSharingMo
SEPARATED_FRE ependent Operator None
(Internal planning) de
Q, Mode)
HYBRID_SHARED

OFF, ON ON(On) ON(On) Engineering Design GlobalProcSwitch

X2_OVER_OSS(X2
X2_OVER_OSS,
SonLink is set up None Engineering Design GlobalProcSwitch
X2_OVER_S1
over OSS)

OFF, ON ON(On) ON(On) Engineering Design GlobalProcSwitch

LCG_PROFILE_0,
LCG_PROFILE_1, LCG_PROFILE_0 LCG_PROFILE_0 Engineering Design GlobalProcSwitch
LCG_PROFILE_2

OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch

OFF, ON ON(On) ON(On) Engineering Design GlobalProcSwitch

The value OFF(Off)

is recommended if
the eNodeB
configuration data
on a network is to
be modified by
using the
interlocking
modification
function on the
CME.
OFF, ON OFF(Off) Engineering Design GlobalProcSwitch
The value ON(On)
is recommended if
the eNodeB
configuration data
on a network is to
be modified by
using the automatic
eNodeB
configuration
update over the X2
interface.

OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch

SELECTED_PLMNI
SELECTED_PLMNI
D, None Engineering Design GlobalProcSwitch
D
PRIMARY_PLMNID

NULL,
BASED_ON_RIM, NULL None Engineering Design GlobalProcSwitch
BASED_ON_ECO
OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch
 If the function of
RRC connection
reestablishment
0~6000 0 protection is used, Engineering Design GlobalProcSwitch
you are advised to
set this parameter
to 20.
 The recommended
value is 0 if the X2
automatic removal
function is not
required.
0~50400 0 Engineering Design GlobalProcSwitch
The recommended
value is 10080 if the
X2 automatic
removal function is
required.

PrivateCoding,
PrivateCoding None Engineering Design GlobalProcSwitch
StandardCoding
OFF, ON OFF(Off) OFF Engineering Design GlobalProcSwitch
OFF, ON OFF(Off) None Engineering Design GlobalProcSwitch

OFF, ON OFF(Off) None Engineering Design GlobalProcSwitch

OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch
 RrcSetupOptSwitch
:Off, RrcSetupOptSwitch
RrcSetupOptSwitch
IucsRrcRecfgMcCo :On,
,
mbSwitch:Off, IucsRrcRecfgMcCo
IucsRrcRecfgMcCo
RcrpRrcRecfgMcCo mbSwitch:On,
mbSwitch,
mbSwitch:Off, RcrpRrcRecfgMcCo
RcrpRrcRecfgMcCo
RrcRecfgMcOptSwi mbSwitch:On,
mbSwitch,
tch:Off, RrcRecfgMcOptSwi
RrcRecfgMcOptSwi
IdleCsfbRedirectOp tch:On,
tch,
tSwitch:Off, IdleCsfbRedirectOp
IdleCsfbRedirectOp
UlNasBufferSwitch: tSwitch:On,
tSwitch,
Off, UlNasBufferSwitch:
UlNasBufferSwitch,
IratMeasCfgTransS On,
IratMeasCfgTransS
witch:Off, IratMeasCfgTransS
witch, Engineering Design GlobalProcSwitch
GeranAnrMcOptSwi witch:On,
GeranAnrMcOptSwi
tch:Off, GeranAnrMcOptSwi
tch,
InactDiscardSwitch: tch:On,
InactDiscardSwitch,
Off, InactDiscardSwitch:
SRVCCHoBasedUe
SRVCCHoBasedUe On,
CapSwitch,
CapSwitch:Off, SRVCCHoBasedUe
L2GPLMNChooseO
L2GPLMNChooseO CapSwitch:Off,
ptSwitch,
ptSwitch:Off, L2GPLMNChooseO
HoInRrcRecfgMcCo
HoInRrcRecfgMcCo ptSwitch:Off,
mbSwitch,
mbSwitch:Off, HoInRrcRecfgMcCo
UeCapEnquiryCom
UeCapEnquiryCom mbSwitch:On,
bSwitch,
bSwitch:Off, UeCapEnquiryCom
UeTraceOptSwitch
UeTraceOptSwitch: bSwitch:On
Off
OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch

ACTIVE_CELL,
ACTIVE_CELL(Acti ACTIVE_CELL(Acti
CONFIGURED_CE Engineering Design GlobalProcSwitch
ve Cell) ve Cell)
LL
OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch

r1, r2, r3, r4, r5, Default/Recommen

Infinity(Infinity) Infinity(Infinity) GlobalProcSwitch
Infinity ded Value
OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch

In the scenario
where the
TimeAlignmentTime
r parameter is set to
INFINITY and the
duration of a UE
being lost must be
Default/Recommen
OFF, ON OFF(Off) short, the GlobalProcSwitch
ded Value
parameter value
ON is
recommended. In
other scenarios, the
parameter value
OFF is
recommended.
v32, v64, v128, Radio Planning
v32(v32) None GlobalProcSwitch
v256 (Internal planning)

OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch

RimUtranSwitch, RimUtranSwitch:Off
None Engineering Design GlobalProcSwitch
EcoSwitch , EcoSwitch:Off
SupportS1UeCapM SupportS1UeCapM SupportS1UeCapM
Engineering Design GlobalProcSwitch
atchMsg atchMsg:Off atchMsg:Off
OFF, ON ON(On) ON(On) Engineering Design GlobalProcSwitch

OFF,This switch
should be off if the
Default/Recommen
OFF, ON ON(On) eNodeB needs to GlobalProcSwitch
ded Value
be configured more
than 18 cells.
MMESELECTALGO MMESELECTALGO
SWITCHFORGUUE SWITCHFORGUUE
, :Off,
Default/Recommen
GUMMEITYPESWI GUMMEITYPESWI None GlobalProcSwitch
ded Value
TCH, TCH:Off,
NNSFENHANCEM NNSFENHANCEM
ENTSWITCH ENTSWITCH:Off

Default/Recommen
OFF, ON OFF(Off) OFF GlobalProcSwitch
ded Value
 CaGapMeasPriOffS
CaGapMeasPriOffS CaGapMeasPriOffS
witch:Off,
witch, witch:Off,
CaHoReqWithR9Co
CaHoReqWithR9Co CaHoReqWithR9Co
nfigSwitch:Off,
nfigSwitch, nfigSwitch:Off,
NasSecProcSwitch:
NasSecProcSwitch, NasSecProcSwitch:
Off,
AntennaFullConfigS Off,
AntennaFullConfigS
witch, AntennaFullConfigS
witch:Off,
DrxConfigMsgSwitc witch:Off,
DrxConfigMsgSwitc
h, MultiplexingTabSel Engineering Design GlobalProcSwitch
h:Off,
MultiplexingTabSel Switch:Off,
MultiplexingTabSel
Switch, DrxConfigMsgSwitc
Switch:Off,
SCellModCaMeasR h:Off,
SCellModCaMeasR
mvSwitch, SCellModCaMeasR
mvSwitch:Off,
HoCfgReleaseJudg mvSwitch:Off,
HoCfgReleaseJudg
eSwitch, HoCfgReleaseJudg
eSwitch:Off,
ScellIndexLimitSwit eSwitch:Off,ScellInd
ScellIndexLimitSwit
ch exLimitSwitch:Off.
ch:Off
BASED_TNL,
BASED_TNL(Base Default/Recommen
BASED_X2INTERF None GlobalProcSwitch
d on TNL) ded Value
ACE
BASED_ON_X2FA BASED_ON_X2FA
ULT, ULT:Off,
BASED_ON_X2US BASED_ON_X2US
AGE_WITH_NEGO AGE_WITH_NEGO Default/Recommen
None GlobalProcSwitch
, :Off, ded Value
BASED_ON_X2US BASED_ON_X2US
AGE_WITHOUT_N AGE_WITHOUT_N
EGO EGO:Off
 Default/Recommen
1~50400 10080 None GlobalProcSwitch
ded Value
 Default/Recommen
1~50400 10080 None GlobalProcSwitch
ded Value
 Default/Recommen
0~10000 0 None GlobalProcSwitch
ded Value
 Default/Recommen
0~10000 0 None GlobalProcSwitch
ded Value
DISABLE, ENABLE ENABLE(Enable) DISABLE(Disable) Engineering Design GlobalProcSwitch

Default/Recommen
OFF, ON OFF(Off) OFF(Off) GlobalProcSwitch
ded Value
MAX_SYNC_USER
_1200,
MAX_SYNC_USER
_1800,
MAX_SYNC_USER MAX_SYNC_USER
MAX_SYNC_USER
_1200(MAX_SYNC _1200(MAX_SYNC Engineering Design GlobalProcSwitch
_2400,
_USER_1200) _USER_1200)
MAX_SYNC_USER
_3000,
MAX_SYNC_USER
_3600
TIMETOWAIT_NOT
CARRY,
TIMETOWAIT_1s,
TIMETOWAIT_2s,
TIMETOWAIT_DEF
TIMETOWAIT_5s, Default/Recommen
AULT(TIMETOWAI None GlobalProcSwitch
TIMETOWAIT_10s, ded Value
T_DEFAULT)
TIMETOWAIT_20s,
TIMETOWAIT_60s,
TIMETOWAIT_DEF
AULT
 Default/Recommen
0~2000 0 None GlobalProcSwitch
ded Value
 Default/Recommen
5~50400 30 None GlobalProcSwitch
ded Value
BASED_ON_EX2F BASED_ON_EX2F Default/Recommen
None GlobalProcSwitch
AULT AULT:On ded Value

Default/Recommen
60~50400 10080 None GlobalProcSwitch
ded Value
ALL_FREE_MODE,
HUAWEI_FREE_O ALL_FREE_MODE( Default/Recommen
None GlobalProcSwitch
THER_CONTROLL All free mode) ded Value
ED
 Default/Recommen
1~10000 1 None GlobalProcSwitch
ded Value
 Default/Recommen
1~50400 10080 None GlobalProcSwitch
ded Value
OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch
FreqAddCtrl FreqAddCtrl:On FreqAddCtrl:On Engineering Design GlobalProcSwitch

Radio Planning
Auto, Customized Auto(Auto) None (Negotiation with GlobalProcSwitch
the peer)
 10 for networks
where repeated Radio Planning
0~100 0 GlobalProcSwitch
access failures (Internal planning)
occur
 Off when CME-
ADD_NCELL_CFG ADD_NCELL_CFG based linked
_SW, _SW:Off, updates are
MOD_NCELL_CFG MOD_NCELL_CFG enabled; on when
_SW, _SW:Off, CME-based linked
Engineering Design GlobalProcSwitch
DEL_NCELL_CFG_ DEL_NCELL_CFG_ updates are
SW, SW:Off, disabled and X2-
ADD_FREQ_CFG_ ADD_FREQ_CFG_ based automatic
SW SW:Off updates are
required
HoDataSendCtrlSwi HoDataSendCtrlSwi HoDataSendCtrlSwi
Engineering Design GlobalProcSwitch
tch tch:Off tch:Off
 PCI_CONFUSION_ PCI_CONFUSION_
PCI_CONFUSION_
REEST_SWITCH : REEST_SWITCH:O
REEST_SWITCH , Default/Recommen
Off, n, GlobalProcSwitch
S1_HANDOVER_R ded Value
S1_HANDOVER_R S1_HANDOVER_R
EEST_SWITCH
EEST_SWITCH:Off EEST_SWITCH:On

S1MMESonSetupS S1MMESonSetupS S1MMESonSetupS

witch, witch:Off, witch:Off, Default/Recommen
GlobalProcSwitch
S1MMESonDeleteS S1MMESonDeleteS S1MMESonDeleteS ded Value
witch witch:Off witch:Off
OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch

OFF, ON OFF(Off) OFF(Off) Engineering Design GlobalProcSwitch

AbnormalUeHandle AbnormalUeHandle AbnormalUeHandle
Switch, Switch:Off, Switch:Off,
UltraFlashCsfbCom UltraFlashCsfbCom UltraFlashCsfbCom Default/Recommen
GlobalProcSwitch
OptSw, OptSw:Off, OptSw:Off, ded Value
ForbidR8R9UeAcce ForbidR8R9UeAcce ForbidR8R9UeAcce
ssB41Sw ssB41Sw:Off ssB41Sw:Off
 Radio Planning
UeTypeRecogSwitc UeTypeRecogSwitc
OFF(Off) (Negotiation with GlobalProcSwitch
h h:Off
the peer)
HUAWEI_S1_SCT HUAWEI_S1_SCT
P_ABORT_SMOOT P_ABORT_SMOOT
H_SW, H_SW:Off, Default/Recommen
None GlobalProcSwitch
OTHER_S1_SCTP OTHER_S1_SCTP ded Value
_ABORT_SMOOTH _ABORT_SMOOTH
_SW _SW:Off
MAX_USER_1200, MAX_USER_1200( MAX_USER_1200(
Engineering Design GlobalProcSwitch
MAX_USER_1800 MAX_USER_1200) MAX_USER_1200)
UTRAN_CSFB_FR UTRAN_CSFB_FR UTRAN_CSFB_FR
Default/Recommen
EQ_CHOOSE_OPT EQ_CHOOSE_OPT EQ_CHOOSE_OPT GlobalProcSwitch
ded Value
_SW _SW:Off _SW:Off

Radio Planning
OFF, ON OFF(Off) OFF(Off) GlobalProcSwitch
(Internal planning)
RrcConnPunishStat RrcConnPunishStat RrcConnPunishStat Radio Planning
GlobalProcSwitch
Switch Switch:Off Switch:Off (Internal planning)

Radio Planning LicenseSharingPoli

0~5 None None
(Internal planning) cy
 LicenseSharingPoli
1~100 None None Engineering Design
cy

LicenseSharingPoli
0~100 0 None Engineering Design
cy

0~255 None None Engineering Design MBMSPara

10240~593920 58 58 Engineering Design MBMSPara

MBMS_RSVD_CEL
L,
None None Engineering Design MBMSPara
MBMS_NON_RSV
D_CELL

0~255 None None Engineering Design MBMSPara

SessionForMultiMA SessionForMultiMA Default/Recommen
0 MBMSPara
Switch Switch:Off ded Value

0~9 None None N/A MlbQciGroup

0~50000 0 None N/A MlbQciGroup

0~50000 0 None N/A MlbQciGroup

 Radio Planning
0~31 None None MMEDomainName
(Internal planning)

Radio Planning
0~5 None None MMEDomainName
(Internal planning)

Radio Planning
1~127 characters None None MMEDomainName
(Internal planning)

1~300 1 None Engineering Design S1ReestTimer

1~300 300 None Engineering Design S1ReestTimer

Radio Planning
0~5 None None eNBCnOpRsvdPara
(Internal planning)
 Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit8:
0,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit9:
1,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
2,
0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
3,
1:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
4,
2:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
5,
3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
6,
4:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
7,
5:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
8,
6:Off,
RsvdSwPara0_bit1 None Engineering Design eNBCnOpRsvdPara
RsvdSwPara0_bit1
9,
7:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
0,
8:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
1,
9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
2,
0:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
3,
1:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
4,
2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
5,
3:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
6,
4:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
7,
5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
 Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit8:
0,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit9:
1,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
2,
0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
3,
1:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
4,
2:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
5,
3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
6,
4:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
7,
5:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
8,
6:Off,
RsvdSwPara1_bit1 None Engineering Design eNBCnOpRsvdPara
RsvdSwPara1_bit1
9,
7:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
0,
8:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
1,
9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
2,
0:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
3,
1:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
4,
2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
5,
3:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
6,
4:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
7,
5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
 On,
RsvdSwPara2_bit1
RsvdSwPara2_bit8:
0,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit9:
1,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
2,
0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
3,
1:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
4,
2:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
5,
3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
6,
4:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
7,
5:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
8,
6:On,
RsvdSwPara2_bit1 None Engineering Design eNBCnOpRsvdPara
RsvdSwPara2_bit1
9,
7:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
0,
8:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
1,
9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
2,
0:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
3,
1:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
4,
2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
5,
3:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
6,
4:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
7,
5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2

0~4294967295 0 None Engineering Design eNBCnOpRsvdPara

0~4294967295 0 None Engineering Design eNBCnOpRsvdPara

0~4294967295 0 None Engineering Design eNBCnOpRsvdPara

0~4294967295 0 None Engineering Design eNBCnOpRsvdPara

0~65535 0 None Engineering Design eNBCnOpRsvdPara

0~65535 0 None Engineering Design eNBCnOpRsvdPara

0~65535 0 None Engineering Design eNBCnOpRsvdPara

0~65535 0 None Engineering Design eNBCnOpRsvdPara

0~65535 0 None Engineering Design eNBCnOpRsvdPara

0~65535 0 None Engineering Design eNBCnOpRsvdPara

0~65535 0 None Engineering Design eNBCnOpRsvdPara

0~65535 0 None Engineering Design eNBCnOpRsvdPara

0~255 0 None Engineering Design eNBCnOpRsvdPara

0~255 0 None Engineering Design eNBCnOpRsvdPara

0~255 0 None Engineering Design eNBCnOpRsvdPara

0~255 0 None Engineering Design eNBCnOpRsvdPara

0~255 0 None Engineering Design eNBCnOpRsvdPara

0~255 0 None Engineering Design eNBCnOpRsvdPara

0~255 0 None Engineering Design eNBCnOpRsvdPara

0~255 0 None Engineering Design eNBCnOpRsvdPara

Radio Planning
0~19 None None ChrOutputMode
(Internal planning)

Radio Planning
0~4294967295 None None ChrOutputMode
(Internal planning)
Level_1_Output, Radio Planning
None None ChrOutputMode
Level_2_Output (Internal planning)

SamplingEnable, Radio Planning

None None ChrOutputMode
SamplingUnable (Internal planning)

Radio Planning
0 None None ECO
(Internal planning)
CP_CFG, UP_CFG, CP_UP_CFG(CPU Radio Planning
None ECO
CP_UP_CFG P Config) (Internal planning)

Radio Planning
0~65535 None None ECO
(Internal planning)

Radio Planning
0~65535 None None ECO
(Internal planning)

0~256 characters NULL(empty string) None Engineering Design ECO

0~65535,70000~79
None None N/A ECO
999

Normal, Abnormal,
None None N/A ECO
Blocked

Radio Planning
0~65535 None None eNodeBPath
(Internal planning)

Radio Planning
S1, X2 None None eNodeBPath
(Internal planning)
 Radio Planning
0~65534 None None eNodeBPath
(Internal planning)

Radio Planning
0~65535 None None eNodeBPath
(Internal planning)

Radio Planning
0 None None M1
(Internal planning)

0~65535 None None N/A M1

Radio Planning
0~256 NULL(empty string) None M1
(Internal planning)

Radio Planning
0 None None M2
(Internal planning)

0~65535 None None N/A M2

Radio Planning
0~256 characters NULL(empty string) None M2
(Internal planning)

0~65535,70000~79 Radio Planning

None None M2
999 (Internal planning)
Normal, Abnormal,
None None N/A M2
Blocked

Normal, Abnormal None None N/A M2

0~65535 None None N/A M2

0~150 None None N/A M2

0~20 None None N/A M2

Null,
LowerLinkFault,
SetupFail, CfgErr,
None None N/A M2
CellNotAvailable,
NoLicense,
Undefine
0~560 characters None None N/A M2

Radio Planning
0~31 None None S1
(Internal planning)

Radio Planning
0~5 None None S1
(Internal planning)

Radio Planning
0~65535 None None S1
(Internal planning)

Radio Planning
0~65535 None None S1
(Internal planning)

Release_R8,
Release_R9, Radio Planning
Release_R8(Releas
Release_R10, None (Negotiation with S1
e 8)
Release_R11, the peer)
Release_R12
0~256 characters NULL(empty string) None Engineering Design S1

CP_CFG, UP_CFG, CP_UP_CFG(CPU Radio Planning

None S1
CP_UP_CFG P Config) (Internal planning)

Radio Planning
0~255 255 None S1
(Internal planning)

If the eNodeB
works in hybrid
RAN sharing mode,
the recommended
Radio Planning
0~5,255 255 value is ranging S1
(Internal planning)
from 0 to 5;
otherwise, set this
parameter to the
invalid value 255.
DISABLE, ENABLE DISABLE(Disable) None Engineering Design S1

0~65534 None None N/A S1

Normal, Abnormal None None N/A S1

FALSE, TRUE None None N/A S1

0~65535,70000~79
None None N/A S1
999

Normal, Abnormal,
None None N/A S1
Blocked

Radio Planning
0~65534 None None S1Interface
(Internal planning)

0~65535,70000~79 Radio Planning

None None S1Interface
999 (Internal planning)

Radio Planning
0~5 None None S1Interface
(Internal planning)
Release_R8,
Release_R9, Radio Planning
Release_R8(Releas
Release_R10, None (Negotiation with S1Interface
e 8)
Release_R11, the peer)
Release_R12

Radio Planning
FALSE, TRUE FALSE(FALSE) None S1Interface
(Internal planning)
MANUAL_MODE,
MANUAL_MODE None Engineering Design S1Interface
AUTO_MODE

MANUAL_CREATE
MANUAL_CREATE
D, None N/A S1Interface
D(Manual Created)
AUTO_CREATED
 Radio Planning
0~255 255 None S1Interface
(Internal planning)

If the eNodeB
works in hybrid
RAN sharing mode,
the recommended
Radio Planning
0~5,255 255 value is ranging S1Interface
(Internal planning)
from 0 to 5;
otherwise, set this
parameter to the
invalid value 255.

Normal, Abnormal None None N/A S1Interface

Normal, Abnormal,
None None N/A S1Interface
Blocked
FALSE, TRUE,
None None N/A S1Interface
NULL

0~3600 None None N/A S1Interface

0~150 characters None None N/A S1Interface

0~224 characters None None N/A S1Interface

0~300 characters NULL(empty string) None N/A S1Interface

0~255 None None N/A S1Interface

NULL,
LowerLinkFault,
MmecImpact,
SetupFail, CfgErr,
None None N/A S1Interface
LicRestrict,
PlmnDiff,
TacNotCfg,
Deleting, Undefine

Radio Planning
0 None None SO
(Internal planning)
CP_CFG, UP_CFG, CP_UP_CFG(CPU Radio Planning
None SO
CP_UP_CFG P Config) (Internal planning)

Radio Planning
0~65535 None None SO
(Internal planning)

Radio Planning
0~65535 None None SO
(Internal planning)

0~256 characters NULL(empty string) None Engineering Design SO

0~65535,70000~79
None None N/A SO
999

Normal, Abnormal,
None None N/A SO
Blocked

0~49 None None Engineering Design AblMsg

ALL, IMEISV_TAC, Radio Planning

ALL(All) None AblMsg
IMEISV_TAC_SVN (Internal planning)
 Radio Planning
0~99999999 0 None AblMsg
(Internal planning)

Radio Planning
0~99 0 None AblMsg
(Internal planning)

0~40 characters None None Engineering Design AblMsg

Radio Planning
S1AP, X2AP, RRC None None AblMsg
(Internal planning)
 Radio Planning
0~65535 None None AblMsg
(Internal planning)

Radio Planning
DISCARD, MODIFY None None AblMsg
(Internal planning)

ZERO, ONE, TWO, Radio Planning

ZERO None AblMsg
THREE (Internal planning)
 Radio Planning
0~268435455 0 None AblMsg
(Internal planning)

Radio Planning
1~800 1 None AblMsg
(Internal planning)

Radio Planning
0~100 characters 0 None AblMsg
(Internal planning)
 Radio Planning
0~268435455 0 None AblMsg
(Internal planning)

Radio Planning
1~800 1 None AblMsg
(Internal planning)

Radio Planning
0~100 characters 0 None AblMsg
(Internal planning)
 Radio Planning
0~268435455 0 None AblMsg
(Internal planning)

Radio Planning
1~800 1 None AblMsg
(Internal planning)

Radio Planning
0~100 characters 0 None AblMsg
(Internal planning)
ZERO, ONE, TWO, Radio Planning
ZERO None AblMsg
THREE (Internal planning)

Radio Planning
0~268435455 0 None AblMsg
(Internal planning)
 Radio Planning
1~800 1 None AblMsg
(Internal planning)

Radio Planning
0~100 characters 0 None AblMsg
(Internal planning)

Radio Planning
0~268435455 0 None AblMsg
(Internal planning)
 Radio Planning
1~800 1 None AblMsg
(Internal planning)

Radio Planning
0~100 characters 0 None AblMsg
(Internal planning)

Radio Planning
0~268435455 0 None AblMsg
(Internal planning)
 Radio Planning
1~800 1 None AblMsg
(Internal planning)

Radio Planning
0~100 characters 0 None AblMsg
(Internal planning)
 Radio Planning
0~4294967295 None None eNodeBFddBbRes
(Internal planning)

Radio Planning
0~7 0 None eNodeBFddBbRes
(Internal planning)
 Radio Planning
0~1 0 None eNodeBFddBbRes
(Internal planning)

Radio Planning
0~6 None None eNodeBFddBbRes
(Internal planning)

LTE_FDD_ONLY,
TWOMODE_NORM
LTE_FDD_ONLY(L Radio Planning
AL, None eNodeBFddBbRes
TE FDD Only) (Internal planning)
THREEMODE_NO
RMAL
BLOCKED, UNBLOCKED(Unbl Radio Planning
None eNodeBFddBbRes
UNBLOCKED ocked) (Internal planning)

ENABLED, Radio Planning

None None eNodeBFddBbRes
DISABLED (Internal planning)
 Radio Planning
0~4294967295 None None eNodeBTddBbRes
(Internal planning)

Radio Planning
0~7 0 None eNodeBTddBbRes
(Internal planning)
 Radio Planning
0~1 0 None eNodeBTddBbRes
(Internal planning)

Radio Planning
0~6 None None eNodeBTddBbRes
(Internal planning)

LTE_TDD_ONLY,
TWOMODE_NORM
LTE_TDD_ONLY(L Radio Planning
AL, None eNodeBTddBbRes
TE TDD Only) (Internal planning)
THREEMODE_NO
RMAL
BLOCKED, UNBLOCKED(Unbl Radio Planning
None eNodeBTddBbRes
UNBLOCKED ocked) (Internal planning)

ENABLED, Radio Planning

None None eNodeBTddBbRes
DISABLED (Internal planning)

Radio Planning
0~3 None None eX2
(Internal planning)

CP_UP_CFG(CPU Radio Planning

CP_UP_CFG None eX2
P Config) (Internal planning)
 Radio Planning
0~65535 None None eX2
(Internal planning)

Radio Planning
0~65535 None None eX2
(Internal planning)

IDEAL, Radio Planning

None None eX2
NON_IDEAL (Internal planning)

Radio Planning
0~256 characters None None eX2
(Internal planning)

0~95 None None N/A eX2

Radio Planning
Normal, Abnormal None None eX2
(Internal planning)

0~65535,70000~79 Radio Planning

None None eX2
999 (Internal planning)

Normal, Abnormal, Radio Planning

None None eX2
Blocked (Internal planning)

Radio Planning
0~65534 None None MmeFeatureCfg
(Internal planning)
DISABLE, ENABLE DISABLE(Disable) DISABLE(disable) Engineering Design MmeFeatureCfg
MANUAL_MODE,
MANUAL_MODE None Engineering Design MmeFeatureCfg
AUTO_MODE

Radio Planning
0~11 None None X2
(Internal planning)

Radio Planning
0~5 None None X2
(Internal planning)
 Radio Planning
0~65535 None None X2
(Internal planning)

Radio Planning
0~65535 None None X2
(Internal planning)

Release_R8,
Release_R9, Radio Planning
Release_R10(Rele
Release_R10, None (Negotiation with X2
ase 10)
Release_R11, the peer)
Release_R12

Equipment
0~256 characters NULL(empty string) None X2
Planning

CP_CFG, UP_CFG, CP_UP_CFG(CPU Radio Planning

None X2
CP_UP_CFG P Config) (Internal planning)
 If the eNodeB
works in hybrid
RAN sharing mode,
the recommended
Radio Planning
0~5,255 255 value is ranging X2
(Internal planning)
from 0 to 5;
otherwise, set this
parameter to the
invalid value 255.

Normal, Abnormal,
None None N/A X2
Blocked

0~65535 None None N/A X2

Normal, Abnormal None None N/A X2

0~65535,70000~79
None None N/A X2
999

000~999 None None Engineering Design X2BlackWhiteList

00~99,000~999 None None Engineering Design X2BlackWhiteList

0~1048575 None None Engineering Design X2BlackWhiteList

X2_BLACK_LIST_T
X2_BLACK_LIST_T
YPE, Radio Planning
YPE(X2 Black List None X2BlackWhiteList
X2_WHITE_LIST_T (Internal planning)
Type)
YPE
 Radio Planning
0~65535 None None X2Interface
(Internal planning)

0~65535,70000~79 Radio Planning

None None X2Interface
999 (Internal planning)

Radio Planning
0~5 None None X2Interface
(Internal planning)

Release_R8,
Release_R9,
Release_R10(Rele Radio Planning
Release_R10, None X2Interface
ase 10) (Internal planning)
Release_R11,
Release_R12
MANUAL_MODE,
MANUAL_MODE None Engineering Design X2Interface
AUTO_MODE

MANUAL_CREATE
MANUAL_CREATE
D, None N/A X2Interface
D(Manual Created)
AUTO_CREATED
 If the eNodeB
works in hybrid
RAN sharing mode,
the recommended
Radio Planning
0~5,255 255 value is ranging X2Interface
(Internal planning)
from 0 to 5;
otherwise, set this
parameter to the
invalid value 255.

0~50 characters None None N/A X2Interface

0~50 characters None None N/A X2Interface

Normal, Abnormal None None N/A X2Interface

SCTP_LINK_FAULT
,
SETUP_FAILURE_
OCCUR,
PEERIN_BLACK_L
None None N/A X2Interface
IST,
STATE_NORMAL,
SETUP_ONLY_ON
E_LINK_ALLOWED
, DELETING

OFF, ON OFF(Off) OFF(Off) Engineering Design Drx

Default/Recommen
OFF, ON ON(On) ON(On) Drx
ded Value
SF10, SF20, SF32,
SF40, SF64, SF80,
SF128, SF160,
SF10(10 SF10(10 Default/Recommen
SF256, SF320, Drx
subframes) subframes) ded Value
SF512, SF640,
SF1024, SF1280,
SF2048, SF2560
 PSF5(5 PDCCH
subframes) for FDD
PSF2(2 PDCCH
subframes) for TDD
in subframe
configuration 0
PSF2(2 PDCCH
subframes) for TDD
in subframe
configuration 1
PSF3(3 PDCCH
subframes) for TDD
PSF1, PSF2, PSF3,
in subframe
PSF4, PSF5, PSF6,
configuration 2
PSF8, PSF10,
PSF5(5 PDCCH PSF2(2 PDCCH Default/Recommen
PSF20, PSF30, Drx
subframes) subframes) for TDD ded Value
PSF40, PSF50,
in subframe
PSF60, PSF80,
configuration 3
PSF100, PSF200
PSF3(3 PDCCH
subframes) for TDD
in subframe
configuration 4
PSF3(3 PDCCH
subframes) for TDD
in subframe
configuration 5
PSF2(2 PDCCH
subframes) for TDD
in subframe
configuration 6
 PSF10(10 PDCCH
subframes) for FDD
PSF3(3 PDCCH
subframes) for TDD
in subframe
configuration 0
PSF3(3 PDCCH
subframes) for TDD
in subframe
configuration 1
PSF1, PSF2, PSF3, PSF4(4 PDCCH
PSF4, PSF5, PSF6, subframes) for TDD
PSF8, PSF10, in subframe
PSF20, PSF30, configuration 2
PSF40, PSF50, PSF10(10 PDCCH PSF3(3 PDCCH Default/Recommen
Drx
PSF60, PSF80, subframes) subframes) for TDD ded Value
PSF100, PSF200, in subframe
PSF300, PSF500, configuration 3
PSF750, PSF1280, PSF4(4 PDCCH
PSF1920, PSF2560 subframes) for TDD
in subframe
configuration 4
PSF4(4 PDCCH
subframes) for TDD
in subframe
configuration 5
PSF3(3 PDCCH
subframes) for TDD
in subframe
configuration 6

UU_DISABLE, UU_DISABLE(Disa UU_DISABLE(Disa Default/Recommen

Drx
UU_ENABLE ble) ble) ded Value
SF2, SF5, SF8,
SF10, SF16, SF20,
SF32, SF40, SF64,
SF10(10 SF10(10 Default/Recommen
SF80, SF128, Drx
subframes) subframes) ded Value
SF160, SF256,
SF320, SF512,
SF640
 Default/Recommen
1~16 1 1 Drx
ded Value
SF128, SF160,
SF256, SF320,
SF320(320 SF320(320 Default/Recommen
SF512, SF640, Drx
subframes) subframes) ded Value
SF1024, SF1280,
SF2048, SF2560

LTE->UTRAN:
SF1280(1280
subframes)
LTE->GERAN:
SF2560(2560
SF128, SF160,
subframes)
SF256, SF320,
SF1280(1280 LTE->CDMA2000 Default/Recommen
SF512, SF640, Drx
subframes) 1xRTT: ded Value
SF1024, SF1280,
SF1280(1280
SF2048, SF2560
subframes)
LTE->CDMA2000
HRPD:
SF1280(1280
subframes)
PSF1, PSF2, PSF3,
PSF4, PSF5, PSF6,
PSF8, PSF10,
PSF20, PSF30,
PSF40, PSF50, PSF200(200 PSF200(200 Default/Recommen
Drx
PSF60, PSF80, PDCCH subframes) PDCCH subframes) ded Value
PSF100, PSF200,
PSF300, PSF500,
PSF750, PSF1280,
PSF1920, PSF2560
 PSF80(80 PDCCH
subframes) for TDD
in subframe
configuration 0
PSF100(100
PDCCH subframes)
for TDD in
subframe
configuration 1
PSF100(100
PDCCH subframes)
for TDD in
PSF1, PSF2, PSF3, subframe
PSF4, PSF5, PSF6, configuration 2
PSF8, PSF10, PSF100(100
PSF20, PSF30, PDCCH subframes)
PSF40, PSF50, PSF100(100 for TDD in Radio Planning
Drx
PSF60, PSF80, PDCCH subframes) subframe (Internal planning)
PSF100, PSF200, configuration 3
PSF300, PSF500, PSF100(100
PSF750, PSF1280, PDCCH subframes)
PSF1920, PSF2560 for TDD in
subframe
configuration 4
PSF100(100
PDCCH subframes)
for TDD in
subframe
configuration 5
PSF100(100
PDCCH subframes)
for TDD in
subframe
configuration 6

10~254 None None Engineering Design ExtendedQci

IMS signaling:
IMSSignalling(IMS
Signalling)
Low-delay service:
IMSSignalling, LowDelay(Low
TCPorBuffStreamin
LowDelay, Delay)
g(TCP Based or Engineering Design ExtendedQci
TCPorBuffStreamin TCP service or non-
Buffered Streaming)
g real-time streaming
service:
TCPorBuffStreamin
g(TCP Based or
Buffered Streaming)
 IMS signaling: 1000
Low-delay services:
900
0.001~1, step:0.001 700 Engineering Design ExtendedQci
TCP-based and
buffered streaming
services: 700

IMS signaling: 1000

Low-delay services:
900
0.001~1, step:0.001 700 Engineering Design ExtendedQci
TCP-based and
buffered streaming
services: 700

MinGbrRate_0_KB,
MinGbrRate_1_KB,
MinGbrRate_2_KB,
MinGbrRate_4_KB,
MinGbrRate_8_KB,
MinGbrRate_16_K
B,
MinGbrRate_32_K
MinGbrRate_1_KB( MinGbrRate_1_KB(
B, Engineering Design ExtendedQci
1kB/s) 1kB/s)
MinGbrRate_64_K
B,
MinGbrRate_128_K
B,
MinGbrRate_256_K
B,
MinGbrRate_512_K
B
MinGbrRate_0_KB,
MinGbrRate_1_KB,
MinGbrRate_2_KB,
MinGbrRate_4_KB,
MinGbrRate_8_KB,
MinGbrRate_16_K
B,
MinGbrRate_32_K
MinGbrRate_1_KB( MinGbrRate_1_KB(
B, Engineering Design ExtendedQci
1kB/s) 1kB/s)
MinGbrRate_64_K
B,
MinGbrRate_128_K
B,
MinGbrRate_256_K
B,
MinGbrRate_512_K
B

0~1, step:0.1 10 10 Engineering Design ExtendedQci

0~39 0 None Engineering Design ExtendedQci

PBR_0_KBps,
PBR_8_KBps,
PBR_16_KBps,
PBR_32_KBps, PBR_8_KBps(8kB/ PBR_8_KBps(8kB/
Engineering Design ExtendedQci
PBR_64_KBps, s) s)
PBR_128_KBps,
PBR_256_KBps,
PBR_INFINITY
9~16 11 11 Engineering Design ExtendedQci

0~39 5 None Engineering Design ExtendedQci

PAID_USER, PAID_USER(Paid PAID_USER(Paid

Engineering Design ExtendedQci
FREE_USER User) User)
FLOW_CTRL, FLOW_CTRL(Flow
None Engineering Design ExtendedQci
NON_FLOW_CTRL Control)

Radio Planning
NO, YES NO NO(No) (Negotiation with ExtendedQci
the peer)
EQUAL_PRI_TO_Q
EQUAL_PRI_TO_Q EQUAL_PRI_TO_Q Radio Planning
CI1,
CI1(Priority same CI1(Priority same (Negotiation with ExtendedQci
HIGHER_PRI_THA
as QCI1) as QCI1) the peer)
N_QCI1
EQUAL_PRI_TO_Q
EQUAL_PRI_TO_Q EQUAL_PRI_TO_Q Radio Planning
CI1,
CI1(Priority same CI1(Priority same (Negotiation with ExtendedQci
HIGHER_PRI_THA
as QCI1) as QCI1) the peer)
N_QCI1

InterRatPolicyCfgGr
0~39 None None Engineering Design
oup
 PS_HO:On,
PS_HO, SRVCC, Default/Recommen InterRatPolicyCfgGr
SRVCC:Off, None
REDIRECTION ded Value oup
REDIRECTION:Off

Default/Recommen InterRatPolicyCfgGr
SRVCC SRVCC:On None
ded Value oup
 PS_HO:On,
PS_HO, CCO_HO,
CCO_HO:Off, Default/Recommen InterRatPolicyCfgGr
SRVCC, None
SRVCC:Off, ded Value oup
REDIRECTION
REDIRECTION:Off

Default/Recommen InterRatPolicyCfgGr
SRVCC SRVCC:On None
ded Value oup
OPT_HO, OPT_HO:On, Default/Recommen InterRatPolicyCfgGr
None
NON_OPT_HO NON_OPT_HO:On ded Value oup

PERMIT_HO_ENU
M, PERMIT_HO_ENU Default/Recommen InterRatPolicyCfgGr
None
FORBID_HO_ENU M(Permit Ho) ded Value oup
M

PERMIT_FAST_AN
R_MEAS_ENUM, PERMIT_FAST_AN Default/Recommen InterRatPolicyCfgGr
None
FORBID_FAST_AN R_MEAS_ENUM ded Value oup
R_MEAS_ENUM
 Default/Recommen
0~15 12 None PuschParam
ded Value

Default/Recommen
0~15 5 None PuschParam
ded Value
 Default/Recommen
0~15 9 None PuschParam
ded Value

0~39 None None Engineering Design RlcPdcpParaGroup

 QCI 1:
DiscardTimer_100(
100)
QCI 2:
DiscardTimer_150(
150)
QCI 3:
DiscardTimer_50(5
0)
DiscardTimer_50,
QCI 4:
DiscardTimer_100,
DiscardTimer_300(
DiscardTimer_150,
300)
DiscardTimer_300,
QCI 5:
DiscardTimer_500, DiscardTimer_Infinit Default/Recommen
DiscardTimer_Infinit RlcPdcpParaGroup
DiscardTimer_750, y(infinity) ded Value
y(infinity)
DiscardTimer_1500
QCI 6:
,
DiscardTimer_Infinit
DiscardTimer_Infinit
y(infinity)
y
QCI 7:
DiscardTimer_150(
150)
QCI 8:
DiscardTimer_Infinit
y(infinity)
QCI 9:
DiscardTimer_Infinit
y(infinity)

QCI 1:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 2:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 3:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 4:
RlcMode_AM(Ackn
owledge Mode)
RlcMode_AM, RlcMode_AM(Ackn Default/Recommen
QCI 5: RlcPdcpParaGroup
RlcMode_UM owledge Mode) ded Value
RlcMode_AM(Ackn
owledge Mode)
QCI 6:
RlcMode_AM(Ackn
owledge Mode)
QCI 7:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 8:
RlcMode_AM(Ackn
owledge Mode)
QCI 9:
RlcMode_AM(Ackn
owledge Mode)
Maxretx_Threshold
_t1,
Maxretx_Threshold
_t2,
Maxretx_Threshold
_t3,
Maxretx_Threshold
_t4, Maxretx_Threshold Maxretx_Threshold Default/Recommen
RlcPdcpParaGroup
Maxretx_Threshold _t32(32) _t32(32) ded Value
_t6,
Maxretx_Threshold
_t8,
Maxretx_Threshold
_t16,
Maxretx_Threshold
_t32
Maxretx_Threshold
_t1,
Maxretx_Threshold
_t2,
Maxretx_Threshold
_t3,
Maxretx_Threshold
_t4, Maxretx_Threshold Maxretx_Threshold Default/Recommen
RlcPdcpParaGroup
Maxretx_Threshold _t32(32) _t32(32) ded Value
_t6,
Maxretx_Threshold
_t8,
Maxretx_Threshold
_t16,
Maxretx_Threshold
_t32
PollByte_kb25, QCI4:
PollByte_kb50, PollByte_kb25(25
PollByte_kb75, kBytes)
PollByte_kb100, QCI5:
PollByte_kb125, PollByte_infinity(infi
PollByte_kb250, nite kBytes)
PollByte_kb375, QCI6:
PollByte_kb25(25 Default/Recommen
PollByte_kb500, PollByte_kb25(25 RlcPdcpParaGroup
kBytes) ded Value
PollByte_kb750, kBytes)
PollByte_kb1000, QCI8:
PollByte_kb1250, PollByte_kb25(25
PollByte_kb1500, kBytes)
PollByte_kb2000, QCI9:
PollByte_kb3000, PollByte_kb25(25
PollByte_infinity kBytes)
PollByte_kb25, QCI4:
PollByte_kb50, PollByte_kb25(25
PollByte_kb75, kBytes)
PollByte_kb100, QCI5:
PollByte_kb125, PollByte_infinity(infi
PollByte_kb250, nite kBytes)
PollByte_kb375, QCI6:
PollByte_kb25(25 Default/Recommen
PollByte_kb500, PollByte_kb25(25 RlcPdcpParaGroup
kBytes) ded Value
PollByte_kb750, kBytes)
PollByte_kb1000, QCI8:
PollByte_kb1250, PollByte_kb25(25
PollByte_kb1500, kBytes)
PollByte_kb2000, QCI9:
PollByte_kb3000, PollByte_kb25(25
PollByte_infinity kBytes)
 QCI 4:
PollPdu_p32(32
PDUs)
QCI 5:
PollPdu_p4,
PollPdu_Infinity(infi
PollPdu_p8,
nite PDUs)
PollPdu_p16,
QCI 6:
PollPdu_p32, PollPdu_p32(32 Default/Recommen
PollPdu_p32(32 RlcPdcpParaGroup
PollPdu_p64, PDUs) ded Value
PDUs)
PollPdu_p128,
QCI 8:
PollPdu_p256,
PollPdu_p32(32
PollPdu_Infinity
PDUs)
QCI 9:
PollPdu_p32(32
PDUs)
 QCI 4:
PollPdu_p32(32
PDUs)
QCI 5:
PollPdu_p4,
PollPdu_Infinity(infi
PollPdu_p8,
nite PDUs)
PollPdu_p16,
QCI 6:
PollPdu_p32, PollPdu_p32(32 Default/Recommen
PollPdu_p32(32 RlcPdcpParaGroup
PollPdu_p64, PDUs) ded Value
PDUs)
PollPdu_p128,
QCI 8:
PollPdu_p256,
PollPdu_p32(32
PollPdu_Infinity
PDUs)
QCI 9:
PollPdu_p32(32
PDUs)
Tpollretrans_m50,
Tpollretrans_m55,
Tpollretrans_m60,
Tpollretrans_m65,
Tpollretrans_m70,
Tpollretrans_m75,
Tpollretrans_m80,
Tpollretrans_m85,
Tpollretrans_m90,
Tpollretrans_m95,
Tpollretrans_m100,
Tpollretrans_m105,
Tpollretrans_m110,
Tpollretrans_m115,
Tpollretrans_m120,
Tpollretrans_m125,
Tpollretrans_m130,
Tpollretrans_m135,
Tpollretrans_m40(4 Tpollretrans_m40(4 Default/Recommen
Tpollretrans_m140, RlcPdcpParaGroup
0) 0) ded Value
Tpollretrans_m145,
Tpollretrans_m150,
Tpollretrans_m155,
Tpollretrans_m160,
Tpollretrans_m165,
Tpollretrans_m170,
Tpollretrans_m175,
Tpollretrans_m180,
Tpollretrans_m185,
Tpollretrans_m190,
Tpollretrans_m195,
Tpollretrans_m200,
Tpollretrans_m205,
Tpollretrans_m210,
Tpollretrans_m215,
Tpollretrans_m220,
Tpollretrans_m225,
Tpollretrans_m230,
Tpollretrans_m50,
Tpollretrans_m55,
Tpollretrans_m60,
Tpollretrans_m65,
Tpollretrans_m70,
Tpollretrans_m75,
Tpollretrans_m80,
Tpollretrans_m85,
Tpollretrans_m90,
Tpollretrans_m95,
Tpollretrans_m100,
Tpollretrans_m105,
Tpollretrans_m110,
Tpollretrans_m115,
Tpollretrans_m120,
Tpollretrans_m125,
Tpollretrans_m130,
Tpollretrans_m135,
Tpollretrans_m50(5 Tpollretrans_m50(5 Default/Recommen
Tpollretrans_m140, RlcPdcpParaGroup
0) 0) ded Value
Tpollretrans_m145,
Tpollretrans_m150,
Tpollretrans_m155,
Tpollretrans_m160,
Tpollretrans_m165,
Tpollretrans_m170,
Tpollretrans_m175,
Tpollretrans_m180,
Tpollretrans_m185,
Tpollretrans_m190,
Tpollretrans_m195,
Tpollretrans_m200,
Tpollretrans_m205,
Tpollretrans_m210,
Tpollretrans_m215,
Tpollretrans_m220,
Tpollretrans_m225,
Tpollretrans_m230,
Tstatprohibit_m45,
Tstatprohibit_m50,
Tstatprohibit_m55,
Tstatprohibit_m60,
Tstatprohibit_m65,
Tstatprohibit_m70,
Tstatprohibit_m75,
Tstatprohibit_m80,
Tstatprohibit_m85,
Tstatprohibit_m90,
Tstatprohibit_m95,
Tstatprohibit_m100,
QCI 4:
Tstatprohibit_m105,
Tstatprohibit_m50(5
Tstatprohibit_m110,
0ms)
Tstatprohibit_m115,
QCI 5:
Tstatprohibit_m120,
Tstatprohibit_m0(0
Tstatprohibit_m125,
ms)
Tstatprohibit_m130,
QCI 6:
Tstatprohibit_m135, Tstatprohibit_m50(5 Default/Recommen
Tstatprohibit_m50(5 RlcPdcpParaGroup
Tstatprohibit_m140, 0) ded Value
0ms)
Tstatprohibit_m145,
QCI 8:
Tstatprohibit_m150,
Tstatprohibit_m50(5
Tstatprohibit_m155,
0ms)
Tstatprohibit_m160,
QCI 9:
Tstatprohibit_m165,
Tstatprohibit_m50(5
Tstatprohibit_m170,
0ms)
Tstatprohibit_m175,
Tstatprohibit_m180,
Tstatprohibit_m185,
Tstatprohibit_m190,
Tstatprohibit_m195,
Tstatprohibit_m200,
Tstatprohibit_m205,
Tstatprohibit_m210,
Tstatprohibit_m215,
Tstatprohibit_m220,
Tstatprohibit_m225,
Tstatprohibit_m230,
Tstatprohibit_m45,
Tstatprohibit_m50,
Tstatprohibit_m55,
Tstatprohibit_m60,
Tstatprohibit_m65,
Tstatprohibit_m70,
Tstatprohibit_m75,
Tstatprohibit_m80,
Tstatprohibit_m85,
Tstatprohibit_m90,
Tstatprohibit_m95,
Tstatprohibit_m100,
QCI 4:
Tstatprohibit_m105,
Tstatprohibit_m40(4
Tstatprohibit_m110,
0ms)
Tstatprohibit_m115,
QCI 5:
Tstatprohibit_m120,
Tstatprohibit_m0(0
Tstatprohibit_m125,
ms)
Tstatprohibit_m130,
QCI 6:
Tstatprohibit_m135, Tstatprohibit_m40(4 Default/Recommen
Tstatprohibit_m40(4 RlcPdcpParaGroup
Tstatprohibit_m140, 0) ded Value
0ms)
Tstatprohibit_m145,
QCI 8:
Tstatprohibit_m150,
Tstatprohibit_m40(4
Tstatprohibit_m155,
0ms)
Tstatprohibit_m160,
QCI 9:
Tstatprohibit_m165,
Tstatprohibit_m40(4
Tstatprohibit_m170,
0ms)
Tstatprohibit_m175,
Tstatprohibit_m180,
Tstatprohibit_m185,
Tstatprohibit_m190,
Tstatprohibit_m195,
Tstatprohibit_m200,
Tstatprohibit_m205,
Tstatprohibit_m210,
Tstatprohibit_m215,
Tstatprohibit_m220,
Tstatprohibit_m225,
Tstatprohibit_m230,
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
Treordering_m50,
Treordering_m55,
Treordering_m60,
Treordering_m65,
Treordering_m70,
Treordering_m50(5 Treordering_m50(5 Default/Recommen
Treordering_m75, RlcPdcpParaGroup
0) 0) ded Value
Treordering_m80,
Treordering_m85,
Treordering_m90,
Treordering_m95,
Treordering_m100,
Treordering_m110,
Treordering_m120,
Treordering_m130,
Treordering_m140,
Treordering_m150,
Treordering_m160,
Treordering_m170,
Treordering_m180,
Treordering_m190,
Treordering_m200
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
Treordering_m50,
Treordering_m55,
Treordering_m60,
Treordering_m65,
Treordering_m70,
Treordering_m40(4 Treordering_m40(4 Default/Recommen
Treordering_m75, RlcPdcpParaGroup
0) 0) ded Value
Treordering_m80,
Treordering_m85,
Treordering_m90,
Treordering_m95,
Treordering_m100,
Treordering_m110,
Treordering_m120,
Treordering_m130,
Treordering_m140,
Treordering_m150,
Treordering_m160,
Treordering_m170,
Treordering_m180,
Treordering_m190,
Treordering_m200

QCI 1:
PdcpSnsize_12bits(
12)
QCI 2:
PdcpSnsize_12bits(
PdcpSnsize_7bits, PdcpSnsize_12bits( 12) Default/Recommen
RlcPdcpParaGroup
PdcpSnsize_12bits 12) QCI 3: ded Value
PdcpSnsize_12bits(
12)
QCI 7:
PdcpSnsize_12bits(
12)
 QCI1:
RlcSnSize_size10(1
0), QCI2:
RlcSnSize_size10(1
RlcSnSize_size5, RlcSnSize_size10(1 Default/Recommen
0), QCI3: RlcPdcpParaGroup
RlcSnSize_size10 0) ded Value
lcSnSize_size10(10
), QCI7:
RlcSnSize_size10(1
0)

QCI 1:
RlcSnSize_size10(1
0)
QCI 2:
RlcSnSize_size10(1
RlcSnSize_size5, RlcSnSize_size10(1 0) Default/Recommen
RlcPdcpParaGroup
RlcSnSize_size10 0) QCI 3: ded Value
RlcSnSize_size10(1
0)
QCI 7:
RlcSnSize_size10(1
0)
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
QCI 1:
Treordering_m50,
Treordering_m50(5
Treordering_m55,
0ms)
Treordering_m60,
QCI 2:
Treordering_m65,
Treordering_m50(5
Treordering_m70,
Treordering_m50(5 0ms) Default/Recommen
Treordering_m75, RlcPdcpParaGroup
0) QCI 3: ded Value
Treordering_m80,
Treordering_m15(1
Treordering_m85,
5ms)
Treordering_m90,
QCI 7:
Treordering_m95,
Treordering_m50(5
Treordering_m100,
0ms)
Treordering_m110,
Treordering_m120,
Treordering_m130,
Treordering_m140,
Treordering_m150,
Treordering_m160,
Treordering_m170,
Treordering_m180,
Treordering_m190,
Treordering_m200
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
QCI 1:
Treordering_m50,
Treordering_m40(4
Treordering_m55,
0ms)
Treordering_m60,
QCI 2:
Treordering_m65,
Treordering_m40(4
Treordering_m70,
Treordering_m40(4 0ms) Default/Recommen
Treordering_m75, RlcPdcpParaGroup
0) QCI 3: ded Value
Treordering_m80,
Treordering_m10(1
Treordering_m85,
0ms)
Treordering_m90,
QCI 7:
Treordering_m95,
Treordering_m40(4
Treordering_m100,
0ms)
Treordering_m110,
Treordering_m120,
Treordering_m130,
Treordering_m140,
Treordering_m150,
Treordering_m160,
Treordering_m170,
Treordering_m180,
Treordering_m190,
Treordering_m200

Default/Recommen
FALSE, TRUE TRUE(TRUE) TRUE(TRUE) RlcPdcpParaGroup
ded Value
 Default/Recommen
OFF, ON ON(On) ON(On) RlcPdcpParaGroup
ded Value
m5, m10, m15,
m20, m25, m30,
m35, m40, m45,
m50, m55, m60,
m65, m70, m75,
m80, m85, m90,
m95, m100, m105,
m110, m115, m120,
m125, m130, m135,
Default/Recommen
m140, m145, m150, m200 m200(200) RlcPdcpParaGroup
ded Value
m155, m160, m165,
m170, m175, m180,
m185, m190, m195,
m200, m205, m210,
m215, m220, m225,
m230, m235, m240,
m245, m250, m300,
m350, m400, m450,
m500
m0, m5, m10, m15,
m20, m25, m30,
m35, m40, m45,
m50, m55, m60,
m65, m70, m75,
m80, m85, m90,
m95, m100, m105,
m110, m115, m120,
m125, m130, m135,
Default/Recommen
m140, m145, m150, m200 m200(200) RlcPdcpParaGroup
ded Value
m155, m160, m165,
m170, m175, m180,
m185, m190, m195,
m200, m205, m210,
m215, m220, m225,
m230, m235, m240,
m245, m250, m300,
m350, m400, m450,
m500
m5, m10, m15,
m20, m25, m30,
m35, m40, m45,
m50, m55, m60,
m65, m70, m75,
m80, m85, m90,
m95, m100, m105,
m110, m115, m120,
m125, m130, m135,
Default/Recommen
m140, m145, m150, m200 m200(200) RlcPdcpParaGroup
ded Value
m155, m160, m165,
m170, m175, m180,
m185, m190, m195,
m200, m205, m210,
m215, m220, m225,
m230, m235, m240,
m245, m250, m300,
m350, m400, m450,
m500
m0, m5, m10, m15,
m20, m25, m30,
m35, m40, m45,
m50, m55, m60,
m65, m70, m75,
m80, m85, m90,
m95, m100, m105,
m110, m115, m120,
m125, m130, m135,
Default/Recommen
m140, m145, m150, m200 m200(200) RlcPdcpParaGroup
ded Value
m155, m160, m165,
m170, m175, m180,
m185, m190, m195,
m200, m205, m210,
m215, m220, m225,
m230, m235, m240,
m245, m250, m300,
m350, m400, m450,
m500
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) RlcPdcpParaGroup
ded Value
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) RlcPdcpParaGroup
ded Value
 QCI 1:
DiscardTimer_100(
100)
QCI 2:
DiscardTimer_150(
150)
QCI 3:
DiscardTimer_50(5
0)
DiscardTimer_50,
QCI 4:
DiscardTimer_100,
DiscardTimer_300(
DiscardTimer_150,
300)
DiscardTimer_300,
QCI 5:
DiscardTimer_500, DiscardTimer_Infinit Default/Recommen
DiscardTimer_Infinit RlcPdcpParaGroup
DiscardTimer_750, y(infinity) ded Value
y(infinity)
DiscardTimer_1500
QCI 6:
,
DiscardTimer_Infinit
DiscardTimer_Infinit
y(infinity)
y
QCI 7:
DiscardTimer_150(
150)
QCI 8:
DiscardTimer_Infinit
y(infinity)
QCI 9:
DiscardTimer_Infinit
y(infinity)
 10
Use RLC parameter
Default/Recommen
0~65535 0 adaptation on RlcPdcpParaGroup
ded Value
eNodeBs with CA
enabled.
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
Treordering_m50,
Treordering_m55,
Treordering_m60,
Treordering_m65,
Treordering_m70,
Treordering_m20(2 Treordering_m20(2 Default/Recommen
Treordering_m75, RlcPdcpParaGroup
0) 0) ded Value
Treordering_m80,
Treordering_m85,
Treordering_m90,
Treordering_m95,
Treordering_m100,
Treordering_m110,
Treordering_m120,
Treordering_m130,
Treordering_m140,
Treordering_m150,
Treordering_m160,
Treordering_m170,
Treordering_m180,
Treordering_m190,
Treordering_m200
m0, m5, m10, m15,
m20, m25, m30,
m35, m40, m45,
m50, m55, m60,
m65, m70, m75,
m80, m85, m90,
m95, m100, m105,
m110, m115, m120,
m125, m130, m135,
Default/Recommen
m140, m145, m150, m20(20) m20(20) RlcPdcpParaGroup
ded Value
m155, m160, m165,
m170, m175, m180,
m185, m190, m195,
m200, m205, m210,
m215, m220, m225,
m230, m235, m240,
m245, m250, m300,
m350, m400, m450,
m500

AmPdcpSnsize_12
QCI9:
bits, AmPdcpSnsize_12 Default/Recommen
AmPdcpSnsize_12 RlcPdcpParaGroup
AmPdcpSnsize_15 bits(12) ded Value
bits(12)
bits

SRB1, SRB2 None None Engineering Design SrbRlcPdcpCfg

Maxretx_Threshold
_t1,
Maxretx_Threshold
_t2,
Maxretx_Threshold
_t3,
Maxretx_Threshold
_t4, Maxretx_Threshold Maxretx_Threshold Default/Recommen
SrbRlcPdcpCfg
Maxretx_Threshold _t32(32) _t32(32) ded Value
_t6,
Maxretx_Threshold
_t8,
Maxretx_Threshold
_t16,
Maxretx_Threshold
_t32

Maxretx_Threshold
_t1,
Maxretx_Threshold
_t2,
Maxretx_Threshold
_t3,
Maxretx_Threshold
_t4, Maxretx_Threshold Maxretx_Threshold Default/Recommen
SrbRlcPdcpCfg
Maxretx_Threshold _t32(32) _t32(32) ded Value
_t6,
Maxretx_Threshold
_t8,
Maxretx_Threshold
_t16,
Maxretx_Threshold
_t32
PollByte_kb25,
PollByte_kb50,
PollByte_kb75,
PollByte_kb100,
PollByte_kb125,
PollByte_kb250,
PollByte_kb375,
PollByte_infinity(infi PollByte_infinity(infi Default/Recommen
PollByte_kb500, SrbRlcPdcpCfg
nite kBytes) nite kBytes) ded Value
PollByte_kb750,
PollByte_kb1000,
PollByte_kb1250,
PollByte_kb1500,
PollByte_kb2000,
PollByte_kb3000,
PollByte_infinity
PollByte_kb25, QCI 4:
PollByte_kb50, PollByte_kb25(25
PollByte_kb75, kBytes)
PollByte_kb100, QCI 5:
PollByte_kb125, PollByte_infinity(infi
PollByte_kb250, nite kBytes)
PollByte_kb375, QCI 6:
PollByte_infinity(infi Default/Recommen
PollByte_kb500, PollByte_kb25(25 SrbRlcPdcpCfg
nite kBytes) ded Value
PollByte_kb750, kBytes)
PollByte_kb1000, QCI 8:
PollByte_kb1250, PollByte_kb25(25
PollByte_kb1500, kBytes)
PollByte_kb2000, QCI 9:
PollByte_kb3000, PollByte_kb25(25
PollByte_infinity kBytes)
PollPdu_p4,
PollPdu_p8,
PollPdu_p16,
PollPdu_p32, PollPdu_Infinity(infi PollPdu_Infinity(infi Default/Recommen
SrbRlcPdcpCfg
PollPdu_p64, nite PDUs) nite PDUs) ded Value
PollPdu_p128,
PollPdu_p256,
PollPdu_Infinity
 QCI 4:
PollPdu_p32(32
PDUs)
QCI 5:
PollPdu_p4,
PollPdu_Infinity(infi
PollPdu_p8,
nite PDUs)
PollPdu_p16,
QCI 6:
PollPdu_p32, PollPdu_Infinity(infi Default/Recommen
PollPdu_p32(32 SrbRlcPdcpCfg
PollPdu_p64, nite PDUs) ded Value
PDUs)
PollPdu_p128,
QCI 8:
PollPdu_p256,
PollPdu_p32(32
PollPdu_Infinity
PDUs)
QCI 9:
PollPdu_p32(32
PDUs)
Tpollretrans_m50,
Tpollretrans_m55,
Tpollretrans_m60,
Tpollretrans_m65,
Tpollretrans_m70,
Tpollretrans_m75,
Tpollretrans_m80,
Tpollretrans_m85,
Tpollretrans_m90,
Tpollretrans_m95,
Tpollretrans_m100,
Tpollretrans_m105,
Tpollretrans_m110,
Tpollretrans_m115,
Tpollretrans_m120,
Tpollretrans_m125,
Tpollretrans_m130,
Tpollretrans_m135,
Tpollretrans_m45(4 Tpollretrans_m45(4 Default/Recommen
Tpollretrans_m140, SrbRlcPdcpCfg
5) 5) ded Value
Tpollretrans_m145,
Tpollretrans_m150,
Tpollretrans_m155,
Tpollretrans_m160,
Tpollretrans_m165,
Tpollretrans_m170,
Tpollretrans_m175,
Tpollretrans_m180,
Tpollretrans_m185,
Tpollretrans_m190,
Tpollretrans_m195,
Tpollretrans_m200,
Tpollretrans_m205,
Tpollretrans_m210,
Tpollretrans_m215,
Tpollretrans_m220,
Tpollretrans_m225,
Tpollretrans_m230,
Tpollretrans_m50,
Tpollretrans_m55,
Tpollretrans_m60,
Tpollretrans_m65,
Tpollretrans_m70,
Tpollretrans_m75,
Tpollretrans_m80,
Tpollretrans_m85,
Tpollretrans_m90,
Tpollretrans_m95,
Tpollretrans_m100,
Tpollretrans_m105,
Tpollretrans_m110,
Tpollretrans_m115,
Tpollretrans_m120,
Tpollretrans_m125,
Tpollretrans_m130,
Tpollretrans_m135,
Tpollretrans_m45(4 Tpollretrans_m45(4 Default/Recommen
Tpollretrans_m140, SrbRlcPdcpCfg
5) 5) ded Value
Tpollretrans_m145,
Tpollretrans_m150,
Tpollretrans_m155,
Tpollretrans_m160,
Tpollretrans_m165,
Tpollretrans_m170,
Tpollretrans_m175,
Tpollretrans_m180,
Tpollretrans_m185,
Tpollretrans_m190,
Tpollretrans_m195,
Tpollretrans_m200,
Tpollretrans_m205,
Tpollretrans_m210,
Tpollretrans_m215,
Tpollretrans_m220,
Tpollretrans_m225,
Tpollretrans_m230,
Tstatprohibit_m45,
Tstatprohibit_m50,
Tstatprohibit_m55,
Tstatprohibit_m60,
Tstatprohibit_m65,
Tstatprohibit_m70,
Tstatprohibit_m75,
Tstatprohibit_m80,
Tstatprohibit_m85,
Tstatprohibit_m90,
Tstatprohibit_m95,
Tstatprohibit_m100,
Tstatprohibit_m105,
Tstatprohibit_m110,
Tstatprohibit_m115,
Tstatprohibit_m120,
Tstatprohibit_m125,
Tstatprohibit_m130,
Tstatprohibit_m135, Default/Recommen
Tstatprohibit_m0(0) Tstatprohibit_m0(0) SrbRlcPdcpCfg
Tstatprohibit_m140, ded Value
Tstatprohibit_m145,
Tstatprohibit_m150,
Tstatprohibit_m155,
Tstatprohibit_m160,
Tstatprohibit_m165,
Tstatprohibit_m170,
Tstatprohibit_m175,
Tstatprohibit_m180,
Tstatprohibit_m185,
Tstatprohibit_m190,
Tstatprohibit_m195,
Tstatprohibit_m200,
Tstatprohibit_m205,
Tstatprohibit_m210,
Tstatprohibit_m215,
Tstatprohibit_m220,
Tstatprohibit_m225,
Tstatprohibit_m230,
Tstatprohibit_m45,
Tstatprohibit_m50,
Tstatprohibit_m55,
Tstatprohibit_m60,
Tstatprohibit_m65,
Tstatprohibit_m70,
Tstatprohibit_m75,
Tstatprohibit_m80,
Tstatprohibit_m85,
Tstatprohibit_m90,
Tstatprohibit_m95,
Tstatprohibit_m100,
Tstatprohibit_m105,
Tstatprohibit_m110,
Tstatprohibit_m115,
Tstatprohibit_m120,
Tstatprohibit_m125,
Tstatprohibit_m130,
Tstatprohibit_m135, Default/Recommen
Tstatprohibit_m0(0) Tstatprohibit_m0(0) SrbRlcPdcpCfg
Tstatprohibit_m140, ded Value
Tstatprohibit_m145,
Tstatprohibit_m150,
Tstatprohibit_m155,
Tstatprohibit_m160,
Tstatprohibit_m165,
Tstatprohibit_m170,
Tstatprohibit_m175,
Tstatprohibit_m180,
Tstatprohibit_m185,
Tstatprohibit_m190,
Tstatprohibit_m195,
Tstatprohibit_m200,
Tstatprohibit_m205,
Tstatprohibit_m210,
Tstatprohibit_m215,
Tstatprohibit_m220,
Tstatprohibit_m225,
Tstatprohibit_m230,
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
Treordering_m50,
Treordering_m55,
Treordering_m60,
Treordering_m65,
Treordering_m70,
Treordering_m35(3 Treordering_m35(3 Default/Recommen
Treordering_m75, SrbRlcPdcpCfg
5) 5) ded Value
Treordering_m80,
Treordering_m85,
Treordering_m90,
Treordering_m95,
Treordering_m100,
Treordering_m110,
Treordering_m120,
Treordering_m130,
Treordering_m140,
Treordering_m150,
Treordering_m160,
Treordering_m170,
Treordering_m180,
Treordering_m190,
Treordering_m200
Treordering_m0,
Treordering_m5,
Treordering_m10,
Treordering_m15,
Treordering_m20,
Treordering_m25,
Treordering_m30,
Treordering_m35,
Treordering_m40,
Treordering_m45,
Treordering_m50,
Treordering_m55,
Treordering_m60,
Treordering_m65,
Treordering_m70,
Treordering_m35(3 Treordering_m35(3 Default/Recommen
Treordering_m75, SrbRlcPdcpCfg
5) 5) ded Value
Treordering_m80,
Treordering_m85,
Treordering_m90,
Treordering_m95,
Treordering_m100,
Treordering_m110,
Treordering_m120,
Treordering_m130,
Treordering_m140,
Treordering_m150,
Treordering_m160,
Treordering_m170,
Treordering_m180,
Treordering_m190,
Treordering_m200

QCI1, QCI2, QCI3,

QCI4, QCI5, QCI6, None None Engineering Design StandardQci
QCI7, QCI8, QCI9
 QCI6: 1000
QCI7: 900
0.001~1, step:0.001 700 Engineering Design StandardQci
QCI8: 800
QCI9: 700

QCI6: 1000
QCI7: 900
0.001~1, step:0.001 700 Engineering Design StandardQci
QCI8: 800
QCI9: 700

MinGbrRate_0_KB,
MinGbrRate_1_KB,
MinGbrRate_2_KB,
MinGbrRate_4_KB,
MinGbrRate_8_KB,
MinGbrRate_16_K
B,
MinGbrRate_32_K
MinGbrRate_1_KB( MinGbrRate_1_KB(
B, Engineering Design StandardQci
1kB/s) 1kB/s)
MinGbrRate_64_K
B,
MinGbrRate_128_K
B,
MinGbrRate_256_K
B,
MinGbrRate_512_K
B
MinGbrRate_0_KB,
MinGbrRate_1_KB,
MinGbrRate_2_KB,
MinGbrRate_4_KB,
MinGbrRate_8_KB,
MinGbrRate_16_K
B,
MinGbrRate_32_K
MinGbrRate_1_KB( MinGbrRate_1_KB(
B, Engineering Design StandardQci
1kB/s) 1kB/s)
MinGbrRate_64_K
B,
MinGbrRate_128_K
B,
MinGbrRate_256_K
B,
MinGbrRate_512_K
B

0~1, step:0.1 10 10 Engineering Design StandardQci

0~39 0 None Engineering Design StandardQci

0~39 0 None Engineering Design StandardQci

PBR_0_KBps,
PBR_8_KBps,
PBR_16_KBps,
PBR_32_KBps, PBR_8_KBps(8kB/ PBR_8_KBps(8kB/
Engineering Design StandardQci
PBR_64_KBps, s) s)
PBR_128_KBps,
PBR_256_KBps,
PBR_INFINITY
 QCI1: 5
QCI2: 7
QCI3: 6
QCI4: 8
4~16 11 QCI5: 4 Engineering Design StandardQci
QCI6: 9
QCI7: 10
QCI8: 11
QCI9: 12

FLOW_CTRL, FLOW_CTRL(Flow
None Engineering Design StandardQci
NON_FLOW_CTRL Control)
 Radio Planning
1~9 None None eNBQciRsvdPara
(Internal planning)

Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit8:
0,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit9:
1,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
2,
0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
3,
1:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
4,
2:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
5,
3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
6,
4:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
7,
5:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
8,
6:Off,
RsvdSwPara0_bit1 None Engineering Design eNBQciRsvdPara
RsvdSwPara0_bit1
9,
7:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
0,
8:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
1,
9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
2,
0:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
3,
1:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
4,
2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
5,
3:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
6,
4:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
7,
5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
 Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit8:
0,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit9:
1,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
2,
0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
3,
1:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
4,
2:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
5,
3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
6,
4:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
7,
5:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
8,
6:Off,
RsvdSwPara1_bit1 None Engineering Design eNBQciRsvdPara
RsvdSwPara1_bit1
9,
7:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
0,
8:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
1,
9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
2,
0:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
3,
1:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
4,
2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
5,
3:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
6,
4:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
7,
5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
 On,
RsvdSwPara2_bit1
RsvdSwPara2_bit8:
0,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit9:
1,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
2,
0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
3,
1:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
4,
2:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
5,
3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
6,
4:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
7,
5:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
8,
6:On,
RsvdSwPara2_bit1 None Engineering Design eNBQciRsvdPara
RsvdSwPara2_bit1
9,
7:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
0,
8:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
1,
9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
2,
0:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
3,
1:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
4,
2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
5,
3:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
6,
4:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
7,
5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2

0~4294967295 0 None Engineering Design eNBQciRsvdPara

0~4294967295 0 None Engineering Design eNBQciRsvdPara

0~4294967295 0 None Engineering Design eNBQciRsvdPara

0~4294967295 0 None Engineering Design eNBQciRsvdPara

0~65535 0 None Engineering Design eNBQciRsvdPara

0~65535 0 None Engineering Design eNBQciRsvdPara

0~65535 0 None Engineering Design eNBQciRsvdPara

0~65535 0 None Engineering Design eNBQciRsvdPara

0~65535 0 None Engineering Design eNBQciRsvdPara

0~65535 0 None Engineering Design eNBQciRsvdPara

0~65535 0 None Engineering Design eNBQciRsvdPara

0~65535 0 None Engineering Design eNBQciRsvdPara

0~255 0 None Engineering Design eNBQciRsvdPara

0~255 0 None Engineering Design eNBQciRsvdPara

0~255 0 None Engineering Design eNBQciRsvdPara

0~255 0 None Engineering Design eNBQciRsvdPara

0~255 0 None Engineering Design eNBQciRsvdPara

0~255 0 None Engineering Design eNBQciRsvdPara

0~255 0 None Engineering Design eNBQciRsvdPara

0~255 0 None Engineering Design eNBQciRsvdPara

OFF, ON ON(On) ON(On) Engineering Design CqiAdaptiveCfg

ms2, ms5, ms10,
ms20, ms40, ms80, ms40(40ms) ms40(40ms) Engineering Design CqiAdaptiveCfg
ms160

OFF, ON ON(On) ON(On) Engineering Design CqiAdaptiveCfg

 Default/Recommen
OFF, ON ON(On) ON(On) CqiAdaptiveCfg
ded Value
OFF, ON OFF(Off) OFF Engineering Design CqiAdaptiveCfg
OFF, ON OFF(Off) None Engineering Design CqiAdaptiveCfg

OFF, ON ON(On) ON(On) Engineering Design SrsAdaptiveCfg

ms5, ms10, ms20,
ms40, ms80, ms40(40ms) ms40(40ms) Engineering Design SrsAdaptiveCfg
ms160, ms320

0~99999999 None none Engineering Design UeCompatOpt

NOT_CFG(NOT_C
NOT_CFG, CFG NOT_CFG Engineering Design UeCompatOpt
FG)

0~99 99 none Engineering Design UeCompatOpt

 LTE_ANR_SWITCH
LTE_ANR_SWITCH
LTE_ANR_SWITCH _OFF:No,
_OFF:No,
_OFF, UTRAN_ANR_SWI
UTRAN_ANR_SWI
UTRAN_ANR_SWI TCH_OFF:No,
TCH_OFF:No,
TCH_OFF, GERAN_ANR_SWI
GERAN_ANR_SWI
GERAN_ANR_SWI TCH_OFF:No,
TCH_OFF:No,
TCH_OFF, CDMA_ANR_SWIT
CDMA_ANR_SWIT
CDMA_ANR_SWIT CH_OFF:No,
CH_OFF:No,
CH_OFF, DYNAMIC_DRX_S
DYNAMIC_DRX_S
DYNAMIC_DRX_S WITCH_OFF:No,
WITCH_OFF:No,
WITCH_OFF, CA_SWITCH_OFF:
CA_SWITCH_OFF:
CA_SWITCH_OFF, No,
No,
TTI_BUNDLING_S TTI_BUNDLING_S
TTI_BUNDLING_S
WITCH_OFF, WITCH_OFF:No,
WITCH_OFF:No,
MIMO_TM_MODE_ MIMO_TM_MODE_
MIMO_TM_MODE_
SET, SET:No, Default/Recommen
SET:No, UeCompatOpt
APERIODIC_CQI_ APERIODIC_CQI_ ded Value
APERIODIC_CQI_
RPT_SWITCH_OFF RPT_SWITCH_OF
RPT_SWITCH_OF
, F:No,
F:No,
ROHC_SWITCH_O ROHC_SWITCH_O
ROHC_SWITCH_O
FF, FF:No,
FF:No,
DL_2CC_CA_ENH DL_2CC_CA_ENH
DL_2CC_CA_ENH
ANCE_SWITCH_O ANCE_SWITCH_O
ANCE_SWITCH_O
FF, FF:No,
FF:No,
DRX_SWITCH_OF DRX_SWITCH_OF
DRX_SWITCH_OF
F, F:No,
F:No,
OSS_INTER_RAT_ OSS_INTER_RAT_
DL_2CC_CA_ENH
MR_SWITH_OFF, MR_SWITH_OFF:N
ANCE_SWITCH_O
OSS_INTER_FRE o,
FF:No,
Q_MR_SWITH_OF OSS_INTER_FRE
DRX_SWITCH_OF
F Q_MR_SWITH_OF
F:No
F:No

0~80 None none Engineering Design UeCompatOpt

RANK_DETECT_S RANK_DETECT_S RANK_DETECT_S Default/Recommen
UeCompatOpt
WITCH_ON WITCH_ON:No WITCH_ON:No ded Value

QCI1, QCI2, QCI3,

QCI4, QCI5, QCI6, None None Engineering Design TypDrbBsr
QCI7, QCI8, QCI9
TPeriodBSRTimer_
sf5,
TPeriodBSRTimer_
sf10,
TPeriodBSRTimer_
sf16,
TPeriodBSRTimer_
sf20,
TPeriodBSRTimer_
sf32,
TPeriodBSRTimer_
sf40,
TPeriodBSRTimer_
sf64,
TPeriodBSRTimer_ TPeriodBSRTimer_ Default/Recommen
None TypDrbBsr
sf80, sf10(10 subframes) ded Value
TPeriodBSRTimer_
sf128,
TPeriodBSRTimer_
sf160,
TPeriodBSRTimer_
sf320,
TPeriodBSRTimer_
sf640,
TPeriodBSRTimer_
sf1280,
TPeriodBSRTimer_
sf2560,
TPeriodBSRTimer_i
nfinity

sf320, sf640,
Default/Recommen
sf1280, sf2560, sf320(sf320) None TypDrbBsr
ded Value
sf5120, sf10240
GAP_PATTERN_T
YPE_1, GAP_PATTERN_T GAP_PATTERN_T Default/Recommen
HoMeasComm
GAP_PATTERN_T YPE_1 YPE_1 ded Value
YPE_2

FC0, FC1, FC2,

FC3, FC4, FC5,
Default/Recommen
FC6, FC7, FC8, FC6 FC6 HoMeasComm
ded Value
FC9, FC11, FC13,
FC15, FC17, FC19
FC0, FC1, FC2,
FC3, FC4, FC5,
Default/Recommen
FC6, FC7, FC8, FC6 FC6 HoMeasComm
ded Value
FC9, FC11, FC13,
FC15, FC17, FC19

FC0, FC1, FC2,

FC3, FC4, FC5,
Default/Recommen
FC6, FC7, FC8, FC6 FC6 HoMeasComm
ded Value
FC9, FC11, FC13,
FC15, FC17, FC19
 Default/Recommen
NOT_CFG, CFG NOT_CFG NOT_CFG HoMeasComm
ded Value
 Default/Recommen
-140~-43 -44 -44 HoMeasComm
ded Value
 Default/Recommen
NOT_CFG, CFG NOT_CFG NOT_CFG HoMeasComm
ded Value
T_CRMAX_30S,
T_CRMAX_60S,
T_CRMAX_60S(60 T_CRMAX_60S(60 Default/Recommen
T_CRMAX_120S, HoMeasComm
s) s) ded Value
T_CRMAX_180S,
T_CRMAX_240S
T_CRMAXHYST_3
0S,
T_CRMAXHYST_6
0S,
T_CRMAXHYST_1 T_CRMAXHYST_6 T_CRMAXHYST_6 Default/Recommen
HoMeasComm
20S, 0S(60s) 0S(60s) ded Value
T_CRMAXHYST_1
80S,
T_CRMAXHYST_2
40S
 Default/Recommen
1~16 4 4 HoMeasComm
ded Value
 Default/Recommen
1~16 8 8 HoMeasComm
ded Value
TTT_SF_MEDIUM_
0DOT25,
TTT_SF_MEDIUM_
0DOT50, TTT_SF_MEDIUM_ TTT_SF_MEDIUM_ Default/Recommen
HoMeasComm
TTT_SF_MEDIUM_ LDOT0(1) LDOT0(1) ded Value
0DOT75,
TTT_SF_MEDIUM_
LDOT0
TTT_SF_HIGH_0D
OT25,
TTT_SF_HIGH_0D
OT50, TTT_SF_HIGH_0D TTT_SF_HIGH_0D Default/Recommen
HoMeasComm
TTT_SF_HIGH_0D OT75(0.75) OT75(0.75) ded Value
OT75,
TTT_SF_HIGH_LD
OT0

FC0, FC1, FC2,

FC3, FC4, FC5,
Default/Recommen
FC6, FC7, FC8, FC6 FC6 HoMeasComm
ded Value
FC9, FC11, FC13,
FC15, FC17, FC19
FC0, FC1, FC2,
FC3, FC4, FC5,
Default/Recommen
FC6, FC7, FC8, FC6 FC6 HoMeasComm
ded Value
FC9, FC11, FC13,
FC15, FC17, FC19

Default/Recommen
0~600 0 0 HoMeasComm
ded Value
 Default/Recommen
1~8 4 4 InterRatHoComm
ded Value

r1, r2, r4, r8, r16, Default/Recommen

Infinity(Infinity) infinity(Infinity) InterRatHoComm
r32, r64, Infinity ded Value
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms, Default/Recommen
480ms 480ms InterRatHoComm
5120ms, 10240ms, ded Value
1min, 6min, 12min,
30min, 60min
RSCP, ECN0, Default/Recommen
ECN0 ECN0 InterRatHoComm
BOTH ded Value

120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms, Default/Recommen
480ms 480ms InterRatHoComm
5120ms, 10240ms, ded Value
1min, 6min, 12min,
30min, 60min
PILOT_STRENGTH
, Default/Recommen
PILOT_STRENGTH PILOT_STRENGTH InterRatHoComm
PILOT_PN_PHASE ded Value
_AND_STRENGTH

120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms, Default/Recommen
480ms 480ms InterRatHoComm
5120ms, 10240ms, ded Value
1min, 6min, 12min,
30min, 60min

Default/Recommen
PILOT_STRENGTH PILOT_STRENGTH PILOT_STRENGTH InterRatHoComm
ded Value
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
480ms 480ms Engineering Design InterRatHoComm
5120ms, 10240ms,
1min, 6min, 12min,
30min, 60min

RSRP, RSRQ, Default/Recommen

RSRP RSRP InterRatHoComm
BOTH ded Value
 Default/Recommen
EventB1, EventB2 EventB1(EventB1) EventB1(EventB1) InterRatHoComm
ded Value

Default/Recommen
1~65535 1000 1000 InterRatHoComm
ded Value

Default/Recommen
1~6 1 1 InterRatHoComm
ded Value

BY_PRIORITY,
Default/Recommen
BY_SELECT_RATI BY_PRIORITY BY_PRIORITY InterRatHoComm
ded Value
O

BY_PRIORITY,
Default/Recommen
BY_SELECT_RATI BY_PRIORITY BY_PRIORITY InterRatHoComm
ded Value
O
NONE, Default/Recommen
NONE NONE InterRatHoComm
REDIRECTION ded Value

Default/Recommen
PERIOD, EVENT EVENT EVENT InterRatHoComm
ded Value

FIXED,
Default/Recommen
BY_MEAS_RESUL FIXED FIXED InterRatHoComm
ded Value
T

Default/Recommen
1~16 8 8 InterRatHoComm
ded Value

Default/Recommen
1~32 8 8 InterRatHoComm
ded Value

Default/Recommen
0~32 0 0 InterRatHoComm
ded Value
 Default/Recommen
0~16 0 0 InterRatHoComm
ded Value

BY_RATIO, BY_MEAS_RESUL
BY_MEAS_RESUL Default/Recommen
BY_MEAS_RESUL T(BY_MEAS_RES InterRatHoComm
T ded Value
T ULT)
 Default/Recommen
OFF, ON OFF(OFF) OFF(Off) InterRatHoComm
ded Value

Default/Recommen
1~8 4 4 IntraRatHoComm
ded Value
r1, r2, r4, r8, r16, Default/Recommen
Infinity(Infinity) infinity(Infinity) IntraRatHoComm
r32, r64, Infinity ded Value

Default/Recommen
RSRP, RSRQ RSRP RSRP IntraRatHoComm
ded Value
 SAME_AS_TRIG_ SAME_AS_TRIG_
SAME_AS_TRIG_ Default/Recommen
QUAN(Same as QUAN(Same as IntraRatHoComm
QUAN, BOTH ded Value
Trig Quan) Trig Quan)

120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms, Default/Recommen
240ms 240ms IntraRatHoComm
5120ms, 10240ms, ded Value
1min, 6min, 12min,
30min, 60min
 SAME_AS_TRIG_ SAME_AS_TRIG_
SAME_AS_TRIG_ Default/Recommen
QUAN(Same as QUAN(Same as IntraRatHoComm
QUAN, BOTH ded Value
Trig Quan) Trig Quan)

120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms, Default/Recommen
240ms 240ms IntraRatHoComm
5120ms, 10240ms, ded Value
1min, 6min, 12min,
30min, 60min
RSRP, RSRQ, Default/Recommen
RSRP RSRP IntraRatHoComm
BOTH ded Value

RSRP, RSRQ, Default/Recommen

RSRP RSRP IntraRatHoComm
BOTH ded Value
RSRP, RSRQ, Default/Recommen
RSRP RSRP IntraRatHoComm
BOTH ded Value

Default/Recommen
0~5000 40 None IntraRatHoComm
ded Value

RSRP, RSRQ, Default/Recommen

RSRP RSRP IntraRatHoComm
BOTH ded Value

Radio Planning
0~255 None None CSFallBackHo
(Internal planning)
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Radio Planning
40ms 40ms CSFallBackHo
480ms, 512ms, (Internal planning)
640ms, 1024ms,
1280ms, 2560ms,
5120ms
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Radio Planning
40ms 40ms CSFallBackHo
480ms, 512ms, (Internal planning)
640ms, 1024ms,
1280ms, 2560ms,
5120ms
0ms, 40ms, 64ms,
80ms, 100ms,
128ms, 160ms,
256ms, 320ms, Radio Planning
40ms 40ms CSFallBackHo
480ms, 512ms, (Internal planning)
640ms, 1024ms,
1280ms, 2560ms,
5120ms
 Radio Planning
-120~-25 -106 -106 CSFallBackHo
(Internal planning)
 Radio Planning
-24~0 -24 -24 CSFallBackHo
(Internal planning)

Radio Planning
-110~-48 -103 -103 CSFallBackHo
(Internal planning)
 Default/Recommen
-31.5~0 -34 -34 CSFallBackHo
ded Value

Default/Recommen
-140~-43 -80 -80 CSFallBackHo
ded Value
 Radio Planning
1~10 4 4 CSFallBackHo
(Internal planning)

Radio Planning
0~255 None None CellAcBar
(Internal planning)
 NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellAcBar
configure) configure)
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE(
Engineering Design CellAcBar
BOOLEAN_TRUE False) False)

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellAcBar
configure) configure)
P00, P05, P10,
P15, P20, P25,
Default/Recommen
P30, P40, P50, P95(95%) P95(95%) CellAcBar
ded Value
P60, P70, P75,
P80, P85, P90, P95

ACCESS_BARRIN
G_TIME_S4,
ACCESS_BARRIN
G_TIME_S8,
ACCESS_BARRIN
G_TIME_S16,
ACCESS_BARRIN
G_TIME_S32, ACCESS_BARRIN ACCESS_BARRIN Default/Recommen
CellAcBar
ACCESS_BARRIN G_TIME_S4(4s) G_TIME_S4(4s) ded Value
G_TIME_S64,
ACCESS_BARRIN
G_TIME_S128,
ACCESS_BARRIN
G_TIME_S256,
ACCESS_BARRIN
G_TIME_S512
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen
CellAcBar
BOOLEAN_TRUE False) False) ded Value

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen

CellAcBar
BOOLEAN_TRUE False) False) ded Value
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen
CellAcBar
BOOLEAN_TRUE False) False) ded Value

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen

CellAcBar
BOOLEAN_TRUE False) False) ded Value
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen
CellAcBar
BOOLEAN_TRUE False) False) ded Value

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellAcBar
configure) configure)
P00, P05, P10,
P15, P20, P25,
Default/Recommen
P30, P40, P50, P95(95%) P95(95%) CellAcBar
ded Value
P60, P70, P75,
P80, P85, P90, P95

ACCESS_BARRIN
G_TIME_S4,
ACCESS_BARRIN
G_TIME_S8,
ACCESS_BARRIN
G_TIME_S16,
ACCESS_BARRIN
G_TIME_S32, ACCESS_BARRIN ACCESS_BARRIN Default/Recommen
CellAcBar
ACCESS_BARRIN G_TIME_S4(4s) G_TIME_S4(4s) ded Value
G_TIME_S64,
ACCESS_BARRIN
G_TIME_S128,
ACCESS_BARRIN
G_TIME_S256,
ACCESS_BARRIN
G_TIME_S512
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen
CellAcBar
BOOLEAN_TRUE False) False) ded Value

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen

CellAcBar
BOOLEAN_TRUE False) False) ded Value
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen
CellAcBar
BOOLEAN_TRUE False) False) ded Value

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen

CellAcBar
BOOLEAN_TRUE False) False) ded Value
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen
CellAcBar
BOOLEAN_TRUE False) False) ded Value

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellAcBar
configure) configure)
P00, P05, P10,
P15, P20, P25,
Default/Recommen
P30, P40, P50, P95(95%) P95(95%) CellAcBar
ded Value
P60, P70, P75,
P80, P85, P90, P95

ACCESS_BARRIN
G_TIME_S4,
ACCESS_BARRIN
G_TIME_S8,
ACCESS_BARRIN
G_TIME_S16,
ACCESS_BARRIN
G_TIME_S32, ACCESS_BARRIN ACCESS_BARRIN Default/Recommen
CellAcBar
ACCESS_BARRIN G_TIME_S4(4s) G_TIME_S4(4s) ded Value
G_TIME_S64,
ACCESS_BARRIN
G_TIME_S128,
ACCESS_BARRIN
G_TIME_S256,
ACCESS_BARRIN
G_TIME_S512
 AC11BARSTATE:P AC11BARSTATE:P
ermit, ermit,
AC12BARSTATE:P AC12BARSTATE:P
AC11BARSTATE,
ermit, ermit,
AC12BARSTATE,
AC13BARSTATE:P AC13BARSTATE:P Default/Recommen
AC13BARSTATE, CellAcBar
ermit, ermit, ded Value
AC14BARSTATE,
AC14BARSTATE:P AC14BARSTATE:P
AC15BARSTATE
ermit, ermit,
AC15BARSTATE:P AC15BARSTATE:P
ermit ermit

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellAcBar
configure) configure)
P00, P05, P10,
P15, P20, P25,
Default/Recommen
P30, P40, P50, P95(95%) P95(95%) CellAcBar
ded Value
P60, P70, P75,
P80, P85, P90, P95

ACCESS_BARRIN
G_TIME_S4,
ACCESS_BARRIN
G_TIME_S8,
ACCESS_BARRIN
G_TIME_S16,
ACCESS_BARRIN
G_TIME_S32, ACCESS_BARRIN ACCESS_BARRIN Default/Recommen
CellAcBar
ACCESS_BARRIN G_TIME_S4(4s) G_TIME_S4(4s) ded Value
G_TIME_S64,
ACCESS_BARRIN
G_TIME_S128,
ACCESS_BARRIN
G_TIME_S256,
ACCESS_BARRIN
G_TIME_S512
 AC11BARSTATE:P AC11BARSTATE:P
ermit, ermit,
AC12BARSTATE:P AC12BARSTATE:P
AC11BARSTATE,
ermit, ermit,
AC12BARSTATE,
AC13BARSTATE:P AC13BARSTATE:P Default/Recommen
AC13BARSTATE, CellAcBar
ermit, ermit, ded Value
AC14BARSTATE,
AC14BARSTATE:P AC14BARSTATE:P
AC15BARSTATE
ermit, ermit,
AC15BARSTATE:P AC15BARSTATE:P
ermit ermit

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellAcBar
configure) configure)
P00, P05, P10,
P15, P20, P25,
Default/Recommen
P30, P40, P50, P95(95%) P95(95%) CellAcBar
ded Value
P60, P70, P75,
P80, P85, P90, P95

ACCESS_BARRIN
G_TIME_S4,
ACCESS_BARRIN
G_TIME_S8,
ACCESS_BARRIN
G_TIME_S16,
ACCESS_BARRIN
G_TIME_S32, ACCESS_BARRIN ACCESS_BARRIN Default/Recommen
CellAcBar
ACCESS_BARRIN G_TIME_S4(4s) G_TIME_S4(4s) ded Value
G_TIME_S64,
ACCESS_BARRIN
G_TIME_S128,
ACCESS_BARRIN
G_TIME_S256,
ACCESS_BARRIN
G_TIME_S512
 AC11BARSTATE:P AC11BARSTATE:P
ermit, ermit,
AC12BARSTATE:P AC12BARSTATE:P
AC11BARSTATE,
ermit, ermit,
AC12BARSTATE,
AC13BARSTATE:P AC13BARSTATE:P Default/Recommen
AC13BARSTATE, CellAcBar
ermit, ermit, ded Value
AC14BARSTATE,
AC14BARSTATE:P AC14BARSTATE:P
AC15BARSTATE
ermit, ermit,
AC15BARSTATE:P AC15BARSTATE:P
ermit ermit
 MMTELVoicePrefer MMTELVoicePrefer
MMTELVoicePrefer
CfgInd:CFG, CfgInd:CFG,
CfgInd,
MMTELVideoPrefer MMTELVideoPrefer
MMTELVideoPrefer Engineering Design CellAcBar
CfgInd:CFG, CfgInd:CFG,
CfgInd,
SMSPreferCfgInd:C SMSPreferCfgInd:C
SMSPreferCfgInd
FG FG

Radio Planning
0~255 None None CellAccess
(Internal planning)

CELL_BARRED,
CELL_NOT_BARR CELL_NOT_BARR Default/Recommen
CELL_NOT_BARR CellAccess
ED(Not Barred) ED(Not Barred) ded Value
ED
ALLOWED, Default/Recommen
ALLOWED ALLOWED CellAccess
NOT_ALLOWED ded Value

NORMAL_MODE, NORMAL_MODE(N NORMAL_MODE(N Default/Recommen

CellAccess
RR_MODE ormal mode) ormal mode) ded Value

Default/Recommen
1~720 1 1 CellAccess
ded Value
2000-01-
01T00:00:00+00:00 2000-01- Default/Recommen
None CellAccess
~2099-12- 01T00:00:00+00:00 ded Value
31T23:59:59+00:00

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG CellAccess
configure) configure) ded Value
 Default/Recommen
1~1000 100 100 CellAccess
ded Value

Radio Planning
0~255 None None CellOp
(Internal planning)

Radio Planning
0~65535 None None CellOp
(Internal planning)
CELL_RESERVED
CELL_NOT_RESE CELL_NOT_RESE
_FOR_OP, Default/Recommen
RVED_FOR_OP(N RVED_FOR_OP(N CellOp
CELL_NOT_RESE ded Value
ot Reserved) ot Reserved)
RVED_FOR_OP
 Default/Recommen
1~100 16 16 CellOp
ded Value
 Default/Recommen
1~100 16 16 CellOp
ded Value
CELL_MME_CFG_
NUM_0,
CELL_MME_CFG_
NUM_1,
CELL_MME_CFG_ CELL_MME_CFG_ Radio Planning
None CellOp
NUM_2, NUM_0(0) (Internal planning)
CELL_MME_CFG_
NUM_3,
CELL_MME_CFG_
NUM_4
 Radio Planning
0~65535 0 None CellOp
(Internal planning)
 Radio Planning
0~255 0 None CellOp
(Internal planning)
 Radio Planning
0~65535 0 None CellOp
(Internal planning)
 Radio Planning
0~255 0 None CellOp
(Internal planning)
 Radio Planning
0~65535 0 None CellOp
(Internal planning)
 Radio Planning
0~255 0 None CellOp
(Internal planning)
 Radio Planning
0~65535 0 None CellOp
(Internal planning)
 Radio Planning
0~255 0 None CellOp
(Internal planning)

Default/Recommen
1~100 16 16 CellOp
ded Value
 Default/Recommen
1~100 10 10 CellOp
ded Value

Default/Recommen
1~100 5 5 CellOp
ded Value
 Default/Recommen
1~100 10 10 CellOp
ded Value

Default/Recommen
1~100 5 5 CellOp
ded Value

0~5 None None N/A CellOp

 Radio Planning
0~255 None None CellResel
(Internal planning)

DB0_Q_HYST,
DB1_Q_HYST,
DB2_Q_HYST,
DB3_Q_HYST,
DB4_Q_HYST,
DB5_Q_HYST,
DB6_Q_HYST,
DB8_Q_HYST, Default/Recommen
DB4_Q_HYST(4dB) DB4_Q_HYST(4dB) CellResel
DB10_Q_HYST, ded Value
DB12_Q_HYST,
DB14_Q_HYST,
DB16_Q_HYST,
DB18_Q_HYST,
DB20_Q_HYST,
DB22_Q_HYST,
DB24_Q_HYST

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellResel
configure) configure)

S30_T_EVALULATI
ON,
S60_T_EVALULATI
ON,
S120_T_EVALULA S60_T_EVALULATI S60_T_EVALULATI Default/Recommen
CellResel
TION, ON(60s) ON(60s) ded Value
S180_T_EVALULA
TION,
S240_T_EVALULA
TION
S30_T_HYST_NOR
MAL,
S60_T_HYST_NOR
MAL,
S120_T_HYST_NO S30_T_HYST_NOR S30_T_HYST_NOR Default/Recommen
CellResel
RMAL, MAL(30s) MAL(30s) ded Value
S180_T_HYST_NO
RMAL,
S240_T_HYST_NO
RMAL

Default/Recommen
1~16 4 4 CellResel
ded Value
 Default/Recommen
1~16 8 8 CellResel
ded Value

DB_6_Q_HYST_SF
_MEDIUM,
DB_4_Q_HYST_SF
_MEDIUM, DB0_Q_HYST_SF_ DB0_Q_HYST_SF_ Default/Recommen
CellResel
DB_2_Q_HYST_SF MEDIUM(0dB) MEDIUM(0dB) ded Value
_MEDIUM,
DB0_Q_HYST_SF_
MEDIUM

DB_6_Q_HYST_SF
_HIGH,
DB_4_Q_HYST_SF
_HIGH, DB0_Q_HYST_SF_ DB0_Q_HYST_SF_ Default/Recommen
CellResel
DB_2_Q_HYST_SF HIGH(0dB) HIGH(0dB) ded Value
_HIGH,
DB0_Q_HYST_SF_
HIGH
NOT_CFG, CFG CFG(Configure) CFG(Configure) Engineering Design CellResel

Default/Recommen
0~62 9 9 CellResel
ded Value
 Default/Recommen
0~62 7 7 CellResel
ded Value

Default/Recommen
0~7 7 7 CellResel
ded Value
 Default/Recommen
-140~-44 -64 -64 CellResel
ded Value

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellResel
configure) configure)
 Default/Recommen
-30~33 23 23 CellResel
ded Value

NOT_CFG, CFG CFG(Configure) CFG(Configure) Engineering Design CellResel

Default/Recommen
0~62 29 29 CellResel
ded Value

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellResel
configure) configure)
MBW6, MBW15,
Radio Planning
MBW25, MBW50, MBW6(1.4M) MBW6(1.4M) CellResel
(Internal planning)
MBW75, MBW100

Default/Recommen
0~7 1 1 CellResel
ded Value

NOT_CFG, CFG CFG(Configure) CFG(Configure) Engineering Design CellResel

T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5, T_RESEL_SF_1DO T_RESEL_SF_1DO Default/Recommen
CellResel
T_RESEL_SF_0DO T0(1.0) T0(1.0) ded Value
T75,
T_RESEL_SF_1DO
T0

T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5, T_RESEL_SF_0DO T_RESEL_SF_0DO Default/Recommen
CellResel
T_RESEL_SF_0DO T75(0.75) T75(0.75) ded Value
T75,
T_RESEL_SF_1DO
T0
BitString00,
BitString01, Default/Recommen
BitString01(01) BitString01(01) CellResel
BitString10, ded Value
BitString11

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE(

Engineering Design CellResel
BOOLEAN_TRUE False) False)
 Default/Recommen
0~31 5 5 CellResel
ded Value

Default/Recommen
0~31 4 4 CellResel
ded Value

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellResel
configure) configure)

Default/Recommen
0~31 0 0 CellResel
ded Value
NOT_CFG, CFG CFG(Configure) CFG(Configure) Engineering Design CellResel

Default/Recommen
-34~-3 -18 -18 CellResel
ded Value
 Radio Planning CellReselCdma200
0~255 None None
(Internal planning) 0

NOT_CFG(Not NOT_CFG(Not CellReselCdma200

NOT_CFG, CFG Engineering Design
configure) configure) 0

BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( CellReselCdma200

Engineering Design
BOOLEAN_TRUE True) True) 0

NOT_CFG(Not NOT_CFG(Not CellReselCdma200

NOT_CFG, CFG Engineering Design
configure) configure) 0
 CellReselCdma200
0~15 8 8 Engineering Design
0

NOT_CFG(Not NOT_CFG(Not CellReselCdma200

NOT_CFG, CFG Engineering Design
configure) configure) 0

NOT_CFG(Not NOT_CFG(Not CellReselCdma200

NOT_CFG, CFG Engineering Design
configure) configure) 0
 CellReselCdma200
0~7 1 1 Engineering Design
0
 NOT_CFG(Not NOT_CFG(Not CellReselCdma200
NOT_CFG, CFG Engineering Design
configure) configure) 0

T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5, T_RESEL_SF_0DO T_RESEL_SF_0DO Default/Recommen CellReselCdma200
T_RESEL_SF_0DO T75(0.75) T75(0.75) ded Value 0
T75,
T_RESEL_SF_1DO
T0
T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5, T_RESEL_SF_1DO T_RESEL_SF_1DO Default/Recommen CellReselCdma200
T_RESEL_SF_0DO T0(1.0) T0(1.0) ded Value 0
T75,
T_RESEL_SF_1DO
T0

NOT_CFG(Not NOT_CFG(Not CellReselCdma200

NOT_CFG, CFG Engineering Design
configure) configure) 0
 NOT_CFG(Not NOT_CFG(Not CellReselCdma200
NOT_CFG, CFG Engineering Design
configure) configure) 0

NOT_CFG(Not NOT_CFG(Not CellReselCdma200

NOT_CFG, CFG Engineering Design
configure) configure) 0
 CellReselCdma200
0~7 1 1 Engineering Design
0

NOT_CFG(Not NOT_CFG(Not CellReselCdma200

NOT_CFG, CFG Engineering Design
configure) configure) 0
T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5, T_RESEL_SF_1DO T_RESEL_SF_1DO Default/Recommen CellReselCdma200
T_RESEL_SF_0DO T0(1.0) T0(1.0) ded Value 0
T75,
T_RESEL_SF_1DO
T0

T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5, T_RESEL_SF_0DO T_RESEL_SF_0DO Default/Recommen CellReselCdma200
T_RESEL_SF_0DO T75(0.75) T75(0.75) ded Value 0
T75,
T_RESEL_SF_1DO
T0

NOT_CFG(Not NOT_CFG(Not Default/Recommen CellReselCdma200

NOT_CFG, CFG
configure) configure) ded Value 0
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen CellReselCdma200
BOOLEAN_TRUE False) False) ded Value 0

Radio Planning
0~255 None None CellReselGeran
(Internal planning)

Default/Recommen
0~7 1 1 CellReselGeran
ded Value
 NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellReselGeran
configure) configure)

T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5, T_RESEL_SF_1DO T_RESEL_SF_1DO Default/Recommen
CellReselGeran
T_RESEL_SF_0DO T0(1.0) T0(1.0) ded Value
T75,
T_RESEL_SF_1DO
T0

T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5, T_RESEL_SF_0DO T_RESEL_SF_0DO Default/Recommen
CellReselGeran
T_RESEL_SF_0DO T75(0.75) T75(0.75) ded Value
T75,
T_RESEL_SF_1DO
T0

Radio Planning
0~255 None None CellReselUtran
(Internal planning)
 Default/Recommen
0~7 1 1 CellReselUtran
ded Value

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellReselUtran
configure) configure)

T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5, T_RESEL_SF_1DO T_RESEL_SF_1DO Default/Recommen
CellReselUtran
T_RESEL_SF_0DO T0(1.0) T0(1.0) ded Value
T75,
T_RESEL_SF_1DO
T0
T_RESEL_SF_0DO
T25,
T_RESEL_SF_0DO
T5, T_RESEL_SF_0DO T_RESEL_SF_0DO Default/Recommen
CellReselUtran
T_RESEL_SF_0DO T75(0.75) T75(0.75) ded Value
T75,
T_RESEL_SF_1DO
T0

Radio Planning
0~255 None None CellSel
(Internal planning)

Default/Recommen
-140~-44 -64 -64 CellSel
ded Value
 Default/Recommen
0~16 0 0 CellSel
ded Value

Default/Recommen
-34~-3 -18 -18 CellSel
ded Value

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG CellSel
configure) configure) ded Value
1~8 1 None Engineering Design CellSel

Radio Planning
0~255 None None CellSiMap
(Internal planning)

BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE(

Engineering Design CellSiMap
BOOLEAN_TRUE True) True)
RF8, RF16, RF32,
RF16(16 radio RF16(16 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512

RF8, RF16, RF32,

RF16(16 radio RF16(16 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512

RF8, RF16, RF32,

RF32(32 radio RF32(32 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512
RF8, RF16, RF32,
RF32(32 radio RF32(32 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512

RF8, RF16, RF32,

RF64(64 radio RF64(64 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512

RF8, RF16, RF32,

RF64(64 radio RF64(64 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512
RF8, RF16, RF32,
RF64(64 radio RF64(64 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512

RF8, RF16, RF32,

RF16(16 radio RF16(16 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512

RF8, RF16, RF32,

RF32(32 radio RF32(32 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512
 Default/Recommen
1~300 6 6 CellSiMap
ded Value

Default/Recommen
MERGE, DISCARD DISCARD DISCARD CellSiMap
ded Value
 Default/Recommen
MERGE, DISCARD DISCARD DISCARD CellSiMap
ded Value

RF8, RF16, RF32,

RF32(32 radio RF32(32 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512
 If the bandwidth is
1.4 MHz, set this
parameter to 83.
If the bandwidth is 3
MHz, 5 MHz, 10
MHz, 15 MHz, or 20
MHz, set this
0.027~1, step:0.001 27 parameter to 27. Engineering Design CellSiMap
In peak rate tests,
when four transmit
antennas and 20
MHz bandwidth are
configured, the
recommended
value is 54.

RF8, RF16, RF32,

RF32(32 radio RF32(32 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512

RF8, RF16, RF32,

RF32(32 radio RF32(32 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512
RF8, RF16, RF32,
RF64(64 radio RF64(64 radio Default/Recommen
RF64, RF128, CellSiMap
frames) frames) ded Value
RF256, RF512

Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellSiMap
ded Value
 100(Weak SI
0,0.4~1, step:0.01 0 Demodulation Engineering Design CellSiMap
Performance)

Radio Planning
0~255 None None CellUlpcComm
(Internal planning)
AL0, AL04, AL05,
Default/Recommen
AL06, AL07, AL08, AL07(0.7) AL07(0.7) CellUlpcComm
ded Value
AL09, AL1

Default/Recommen
-127~-96 -115 -115 CellUlpcComm
ded Value
 Default/Recommen
-126~24 -67 -67 CellUlpcComm
ded Value

DELTAF_2,
Default/Recommen
DELTAF0, DELTAF0(0dB) DELTAF0(0dB) CellUlpcComm
ded Value
DELTAF2

DELTAF1,
Default/Recommen
DELTAF3, DELTAF3(3dB) DELTAF3(3dB) CellUlpcComm
ded Value
DELTAF5
DELTAF_2,
DELTAF0, Default/Recommen
DELTAF1(1dB) DELTAF1(1dB) CellUlpcComm
DELTAF1, ded Value
DELTAF2

DELTAF_2,
Default/Recommen
DELTAF0, DELTAF2(2dB) DELTAF2(2dB) CellUlpcComm
ded Value
DELTAF2

DELTAF_2,
Default/Recommen
DELTAF0, DELTAF2(2dB) DELTAF2(2dB) CellUlpcComm
ded Value
DELTAF2
 Default/Recommen
-2~12 4 4 CellUlpcComm
ded Value

DELTAMsg2_NEG6
,
DELTAMsg2_NEG4
,
DELTAMsg2_NEG2 DELTAMsg2_6(6dB DELTAMsg2_6(6dB Radio Planning
CellUlpcComm
, DELTAMsg2_0, ) ) (Internal planning)
DELTAMsg2_2,
DELTAMsg2_4,
DELTAMsg2_6,
DELTAMsg2_8

Radio Planning eNBCellOpRsvdPar

0~255 None None
(Internal planning) a
 Radio Planning eNBCellOpRsvdPar
0~65535 None None
(Internal planning) a

Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit8:
0,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit9:
1,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
2,
0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
3,
1:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
4,
2:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
5,
3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
6,
4:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
7,
5:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
8,
6:Off, Default/Recommen eNBCellOpRsvdPar
RsvdSwPara0_bit1 None
RsvdSwPara0_bit1 ded Value a
9,
7:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
0,
8:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
1,
9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
2,
0:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
3,
1:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
4,
2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
5,
3:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
6,
4:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
7,
5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
 Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit8:
0,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit9:
1,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
2,
0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
3,
1:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
4,
2:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
5,
3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
6,
4:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
7,
5:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
8,
6:Off, Default/Recommen eNBCellOpRsvdPar
RsvdSwPara1_bit1 None
RsvdSwPara1_bit1 ded Value a
9,
7:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
0,
8:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
1,
9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
2,
0:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
3,
1:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
4,
2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
5,
3:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
6,
4:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
7,
5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
 On,
RsvdSwPara2_bit1
RsvdSwPara2_bit8:
0,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit9:
1,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
2,
0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
3,
1:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
4,
2:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
5,
3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
6,
4:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
7,
5:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
8,
6:On, Default/Recommen eNBCellOpRsvdPar
RsvdSwPara2_bit1 None
RsvdSwPara2_bit1 ded Value a
9,
7:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
0,
8:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
1,
9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
2,
0:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
3,
1:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
4,
2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
5,
3:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
6,
4:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
7,
5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2

Default/Recommen eNBCellOpRsvdPar
0~4294967295 0 None
ded Value a
 Default/Recommen eNBCellOpRsvdPar
0~4294967295 0 None
ded Value a

Default/Recommen eNBCellOpRsvdPar
0~4294967295 0 None
ded Value a
 Default/Recommen eNBCellOpRsvdPar
0~4294967295 0 None
ded Value a

Default/Recommen eNBCellOpRsvdPar
0~65535 0 None
ded Value a
 Default/Recommen eNBCellOpRsvdPar
0~65535 0 None
ded Value a

Default/Recommen eNBCellOpRsvdPar
0~65535 0 None
ded Value a
 Default/Recommen eNBCellOpRsvdPar
0~65535 0 None
ded Value a

Default/Recommen eNBCellOpRsvdPar
0~65535 0 None
ded Value a
 Default/Recommen eNBCellOpRsvdPar
0~65535 0 None
ded Value a

Default/Recommen eNBCellOpRsvdPar
0~65535 0 None
ded Value a
 Default/Recommen eNBCellOpRsvdPar
0~65535 0 None
ded Value a

Default/Recommen eNBCellOpRsvdPar
0~255 0 None
ded Value a
 Default/Recommen eNBCellOpRsvdPar
0~255 0 None
ded Value a

Default/Recommen eNBCellOpRsvdPar
0~255 0 None
ded Value a
 Default/Recommen eNBCellOpRsvdPar
0~255 0 None
ded Value a

Default/Recommen eNBCellOpRsvdPar
0~255 0 None
ded Value a
 Default/Recommen eNBCellOpRsvdPar
0~255 0 None
ded Value a

Default/Recommen eNBCellOpRsvdPar
0~255 0 None
ded Value a
 Default/Recommen eNBCellOpRsvdPar
0~255 0 None
ded Value a

Radio Planning
0~255 None None EuCellPriBBEqm
(Internal planning)
 Radio Planning
0~23 None None EuCellPriBBEqm
(Internal planning)

Radio Planning
0~255 None None eUCellSectorEqm
(Internal planning)

Radio Planning
0~65535 None None eUCellSectorEqm
(Internal planning)
 Radio Planning
-60~50,32767 32767 None eUCellSectorEqm
(Internal planning)

Default/Recommen
0~23,255 255 None eUCellSectorEqm
ded Value
0~62 None None N/A eUCellSectorEqm

60~254 None None N/A eUCellSectorEqm

0~8 None None N/A eUCellSectorEqm

0~214748364.7 None None N/A eUCellSectorEqm

0~8 None None N/A eUCellSectorEqm

 Default/Recommen
0~6 0 None eUCellSectorEqm
ded Value
NO_COMPRESSIO
N,
NORMAL_COMPR Default/Recommen
NULL(Invalid) None eUCellSectorEqm
ESSION, ded Value
ENHANCED_COM
PRESSION, NULL

0~1048575 None None N/A eUCellSectorEqm

AUTO_MODE_CF
G, AUTO_MODE_CF AUTO_MODE_CF Radio Planning
eUCellSectorEqm
MANUAL_MODE_ G(AUTO_MOD) G(AUTO_MOD) (Internal planning)
CFG
 Radio Planning
0~255 255 255 eUCellSectorEqm
(Internal planning)

Radio Planning EuSectorEqmGrou

0~255 None None
(Internal planning) p
 Radio Planning EuSectorEqmGrou
0~35 None None
(Internal planning) p

Radio Planning EuSectorEqmGrou

0~16 None None
(Internal planning) p

Radio Planning EuSectorEqmGrou

0~65535 None None
(Internal planning) p
 Radio Planning EuSectorEqmGrou
0~23,255 255 None
(Internal planning) p
 Radio Planning EuSectorEqmGrou
-60~50,32767 32767 None
(Internal planning) p
NO_COMPRESSIO
N,
NORMAL_COMPR Default/Recommen EuSectorEqmGrou
NULL(Invalid) None
ESSION, ded Value p
ENHANCED_COM
PRESSION, NULL

AUTO_MODE_CF
G, AUTO_MODE_CF AUTO_MODE_CF Radio Planning EuSectorEqmGrou
MANUAL_MODE_ G(AUTO_MOD) G(AUTO_MOD) (Internal planning) p
CFG

Radio Planning
0~255 None None IbdlInfo
(Internal planning)
0~1048575 None None N/A IbdlInfo

0~62 None None N/A IbdlInfo

4~5,60~254 None None N/A IbdlInfo

0~8 None None N/A IbdlInfo

0~7 None None N/A IbdlInfo

0~4294967295 None None N/A IbdlInfo

DATA_LINK_AVAIL
ABLE,
None None N/A IbdlInfo
DATA_LINK_UNAV
AILABLE

0~254 None None N/A IbdlInfo

0~4294967295 None None N/A IbdlInfo

0~4294967295 None None N/A IbdlInfo

0~4294967295 None None N/A IbdlInfo

0~4294967295 None None N/A IbdlInfo

0~7 None None N/A IbdlInfo

0~1 None None N/A IbdlInfo

0~7 None None N/A IbdlInfo

BIDIRECTIONAL,
FORWARD_DIREC
TION, None None N/A IbdlInfo
BACKWARD_DIRE
CTION

Radio Planning TimeAlignmentTime

0~255 None None
(Internal planning) r
 or SF500 in high- or
ultra-high-speed
cells . If
TimingAdvCmdOpt
Switch is on, it is
recommended that
TimeAlignmentTime
r be set to
SF10240.
If
TimingAdvCmdOpt
Switch is off, the
TimeAlignmentTime
r value determines
the valid value of
LongDrxCycle. To
ensure that the
SF500, SF750, valid value of
SF1280, SF1920, LongDrxCycle is Default/Recommen TimeAlignmentTime
INFINITY(Infinity)
SF2560, SF5120, greater than or ded Value r
SF10240, INFINITY equal to SF80, it is
recommended that
TimeAlignmentTime
r be set to
INFINITY. If
TimingAdvCmdOpt
Switch is on, the
TimeAlignmentTime
r value does not
determine the valid
value of
LongDrxCycle.
However, to avoid
an increase in the
uplink out-of-
synchronization
probability of UEs in
DRX mode, it is
 The parameter
value ON(On) is
recommended for
common cells. The
parameter value Default/Recommen TimeAlignmentTime
OFF, ON ON(On)
OFF(Off) is ded Value r
recommended for
high-speed and
ultra-high-speed
cells.
 INVALID(Invalid INVALID(Invalid
INVALID, Timing Timing Default/Recommen TimeAlignmentTime
ALLMEASMODE Measurement Measurement ded Value r
Mode) Mode)
 If there are many
UEs in high-speed
mobility in the cell,
the parameter value
INVALID, SF218, SF218 is
SF343, SF608, SF928(928 recommended. If Default/Recommen TimeAlignmentTime
SF928, SF1248, subframes) there are many UEs ded Value r
SF2528, SF5088 in low-speed
mobility in the cell,
the parameter value
SF928 is
recommended.
 The parameter
value ON(On) is
recommended for
common cells. The
parameter value Default/Recommen TimeAlignmentTime
OFF, ON ON(On)
OFF(Off) is ded Value r
recommended for
high-speed and
ultra-high-speed
cells.

TimeAlignmentTime
0~15 15 15 Engineering Design
r
TaEnhancePuschD TaEnhancePuschD TaEnhancePuschD Default/Recommen TimeAlignmentTime
mrs mrs:Off mrs:Off ded Value r

Radio Planning
0~255 None None UeTimerConst
(Internal planning)
MS100_T300,
MS200_T300,
MS300_T300,
MS400_T300, MS1000_T300(100 MS1000_T300(100 Default/Recommen
UeTimerConst
MS600_T300, 0ms) 0ms) ded Value
MS1000_T300,
MS1500_T300,
MS2000_T300

MS100_T301,
MS200_T301,
MS300_T301,
MS400_T301, MS200_T301(200m MS200_T301(200m Default/Recommen
UeTimerConst
MS600_T301, s) s) ded Value
MS1000_T301,
MS1500_T301,
MS2000_T301
MS0_T310,
MS50_T310,
MS100_T310,
MS1000_T310(100 MS1000_T310(100 Default/Recommen
MS200_T310, UeTimerConst
0ms) 0ms) ded Value
MS500_T310,
MS1000_T310,
MS2000_T310

MS1000_T311,
MS3000_T311,
MS5000_T311,
MS10000_T311(10 MS10000_T311(10 Default/Recommen
MS10000_T311, UeTimerConst
000ms) 000ms) ded Value
MS15000_T311,
MS20000_T311,
MS30000_T311
n1, n2, n3, n4, n5, Default/Recommen
n1(1) n1(1) UeTimerConst
n6, n8, n10 ded Value

n1, n2, n3, n4, n6, Default/Recommen

n10(10) n10(10) UeTimerConst
n8, n10, n20 ded Value

MIN5_T325,
MIN10_T325, MIN5_T325(MIN5_ MIN5_T325(MIN5_ Default/Recommen
UeTimerConst
MIN15_T325, T325) T325) ded Value
MIN30_T325
 Radio Planning
0~255 None None Cell
(Internal planning)

Radio Planning
1~99 characters None None Cell
(Internal planning)
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE(
Engineering Design Cell
BOOLEAN_TRUE False) False)

NORMAL_CP, NORMAL_CP(Nor NORMAL_CP(Nor Radio Planning

Cell
EXTENDED_CP mal) mal) (Internal planning)
NORMAL_CP, NORMAL_CP(Nor NORMAL_CP(Nor Radio Planning
Cell
EXTENDED_CP mal) mal) (Internal planning)
 Radio Planning
1~64 None None Cell
(Internal planning)

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG Cell
configure) configure) ded Value
18000~46589,5443 Radio Planning
18000 None Cell
6~65535 (Internal planning)

0~46589,54436~65 Radio Planning

None None Cell
535 (Internal planning)
CELL_BW_N6,
CELL_BW_N15,
CELL_BW_N25, Radio Planning
None None Cell
CELL_BW_N50, (Internal planning)
CELL_BW_N75,
CELL_BW_N100
CELL_BW_N6,
CELL_BW_N15,
CELL_BW_N25, Radio Planning
None None Cell
CELL_BW_N50, (Internal planning)
CELL_BW_N75,
CELL_BW_N100

Radio Planning
0~255 None None Cell
(Internal planning)
 Radio Planning
0~503 None None Cell
(Internal planning)

Default/Recommen
1~32 1 1 Cell
ded Value
CELL_DEACTIVE, CELL_DEACTIVE( CELL_DEACTIVE( Default/Recommen
Cell
CELL_ACTIVE Deactivated) Deactivated) ded Value
CELL_UNBLOCK,
CELL_HIGH_BLOC
K,
CELL_UNBLOCK(U
CELL_MIDDLE_BL None Engineering Design Cell
nblock)
OCK,
CELL_LOW_BLOC
K

Default/Recommen
1~1440 60 60 Cell
ded Value
CELL_FDD, Radio Planning
None None Cell
CELL_TDD (Internal planning)
SA0, SA1, SA2,
Radio Planning
SA3, SA4, SA5, SA0(SA0) None Cell
(Internal planning)
SA6
SSP0, SSP1,
SSP2, SSP3,
Radio Planning
SSP4, SSP5, SSP0(SSP0) None Cell
(Internal planning)
SSP6, SSP7,
SSP8, SSP9
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1, dB0(0dB) dB0(0dB) Engineering Design Cell
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1, dB0(0dB) dB0(0dB) Engineering Design Cell
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24
 During manual
configuration,
adhere to the
following rules:
1. If two
neighboring cells
use the same or
overlapping time-
frequency
resources for the
physical random
access channel
(PRACH), they
must have different
values of this
parameter.
2. If a cell uses a
preamble format
Radio Planning
0~837 None less than 4 and Cell
(Internal planning)
provides coverage
for a highway or an
ultra-high-speed
railway, this
parameter must be
set by referring to
constraints in the
parameter
relationship.
Note: When
manually
configuring root ZC
sequences, ensure
that both the first
logical root
sequence and each
subsequent logical
root sequence are
LOW_SPEED,
HIGH_SPEED,
ULTRA_HIGH_SPE LOW_SPEED(Low LOW_SPEED(Low
Engineering Design Cell
ED, speed cell flag) speed cell flag)
EXTRA_HIGH_SPE
ED
 Cell radius <= 1400
m: Preamble
formats 0 to 3 are
recommended for
an FDD cell,
preamble formats 0
to 4 are
recommended for a
TDD cell;
1400 m < Cell
radius <= 14,500 m:
Preamble formats 0
to 3 are
recommended; Default/Recommen
0~4 0 Cell
14,500 m < Cell ded Value
radius <= 29,500 m:
Preamble formats 1
to 3 are
recommended;
29,500 m < Cell
radius <= 77,300 m:
Preamble formats 1
and 3 are
recommended;
77,300 m < Cell
radius <= 160,000
m: Preamble format
3 is recommended.
 Radio Planning
1~160000 10000 10000 Cell
(Internal planning)
 NOT_CFG(Not NOT_CFG(Not Radio Planning
NOT_CFG, CFG Cell
configure) configure) (Internal planning)
1.2~1.4,4.4~5.0,8.9
Radio Planning
~10.0,13.9~15.0,18 98 98 Cell
(Internal planning)
.3~20.0
1.2~1.4,4.4~5.0,8.9
Radio Planning
~10.0,13.9~15.0,18 98 98 Cell
(Internal planning)
.3~20.0

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG Cell
configure) configure) ded Value
 Radio Planning
0~16777215 0 None Cell
(Internal planning)

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG Cell
configure) configure) ded Value

Default/Recommen
-30~36 23 23 Cell
ded Value
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Radio Planning
Cell
BOOLEAN_TRUE False) False) (Internal planning)
SFN,
CELL_COMBINATI
ON,
TWO_RRU_COMBI
Radio Planning
NATION, SFN(SFN) SFN(SFN) Cell
(Internal planning)
DIGITAL_COMBINA
TION,
MPRU_AGGREGA
TION
NO_COMPRESSIO
N,
NORMAL_COMPR NO_COMPRESSIO NO_COMPRESSIO Radio Planning
Cell
ESSION, N(No Compression) N(No Compression) (Internal planning)
ENHANCED_COM
PRESSION
 Radio Planning
2~7 3 None Cell
(Internal planning)
BOOLEAN_FALSE, BOOLEAN_FALSE( Default/Recommen
None Cell
BOOLEAN_TRUE False) ded Value
CRS_PORT_1,
CRS_PORT_2(2 Radio Planning
CRS_PORT_2, None Cell
ports) (Internal planning)
CRS_PORT_4
1T1R, 1T2R, 2T2R,
Radio Planning
2T4R, 4T4R, 8T8R, None None Cell
(Internal planning)
2T8R, 4T8R

Radio Planning
0~256 None None Cell
(Internal planning)
 UL_DL(Uplink and UL_DL(Uplink and Radio Planning
UL_DL, DL_ONLY Cell
downlink) downlink) (Internal planning)

Radio Planning
ACTIVE, STANDBY ACTIVE(Active) None Cell
(Internal planning)
 recommended.
3. In a TDD cell with
four TX channels
and two CRS ports
configured, the
parameter value
4T2P_0011 is
recommended.
4. In a TDD cell with
four TX channels
and four CRS ports
NOT_CFG, configured, the
4T4P_0213, parameter value
4T4P_0231, 4T4P_0213 is
4T4P_0123, recommended.
4T4P_0132, 5. In a TDD cell in
4T4P_0312, broadcast
4T4P_0321, beamforming and
NOT_CFG(Not Default/Recommen
4T2P_0011, with eight TX Cell
configure) ded Value
4T2P_0101, channels and two
4T2P_0110, CRS ports
8T2P_00001111, configured, the
8T2P_00110011, parameter value
8T2P_01010101, 8T2P_00001111 is
8T4P_00112233, recommended.
8T4P_01230123 6. In a TDD cell in
phase shift diversity
and with eight TX
channels and two
CRS ports
configured, the
parameter value
8T2P_00110011 is
recommended.
7. In a TDD cell in
broadcast
beamforming and
2_TO_1, 3_TO_1, 2_TO_1(2:1 2_TO_1(2:1 Radio Planning
Cell
4_TO_1 Compression) Compression) (Internal planning)
CELL_INST_UNIN
STALL,
CELL_INST_UEM_
CFGING,
CELL_INST_RRU_
CFGING,
CELL_INST_BBI_C
FGING,
CELL_INST_RECF
GING,
CELL_INST_DELE
TING,
None None N/A Cell
CELL_INST_NORM
AL,
CELL_INST_BARR
ED,
CELL_INST_ALLO
CATING_RES,
CELL_INST_CRM_
CFGING,
CELL_INST_SFN_
RECFGING,
CELL_INST_RRU_
DPD_TRAINING

0~4294967295 None None N/A Cell

0~32 characters None None N/A Cell

CELL_NO_OP,
CELL_SETUP_ACT
,
CELL_SETUP_UBL
,
CELL_SETUP_HE
ALCHK,
CELL_SETUP_141,
CELL_SETUP_UL
WIDESCAN,
CELL_DEL_BLK_L
OW,
CELL_DEL_BLK_M
ID,
CELL_DEL_BLK_H
IGH,
None None N/A Cell
CELL_DEL_NOUS
ER,
CELL_DEL_DEA,
CELL_DEL_RMV,
CELl_DEL_HEALC
HK,
CELL_DEL_UNHE
AL,
CELL_DEL_SETUP
_FAIL,
CELL_DEL_141_D
EL,
CELL_DEL_ULWID
ESCAN,
CELL_DEL_CELLN
OACCESSALM

0~32 characters None None N/A Cell

CELL_NO_OP,
CELL_SETUP_ACT
,
CELL_SETUP_UBL
,
CELL_SETUP_HE
ALCHK,
CELL_SETUP_141,
CELL_SETUP_UL
WIDESCAN,
CELL_DEL_BLK_L
OW,
CELL_DEL_BLK_M
ID,
CELL_DEL_BLK_H
IGH,
None None N/A Cell
CELL_DEL_NOUS
ER,
CELL_DEL_DEA,
CELL_DEL_RMV,
CELl_DEL_HEALC
HK,
CELL_DEL_UNHE
AL,
CELL_DEL_SETUP
_FAIL,
CELL_DEL_141_D
EL,
CELL_DEL_ULWID
ESCAN,
CELL_DEL_CELLN
OACCESSALM
CELL_PWRSAVE_
UNINSTALL,
CELL_PWRSAVE_
RFSHD,
CELL_PWRSAVE_
CARRIERPWROFF
,
CELL_PWRSAVE_
LOWPWR_CELLU
SEDPWRRDU,
CELL_PWRSAVE_
LOWPWR_RSPWR
RDU, None None N/A Cell
CELL_PWRSAVE_
LOWPWR_RFSHD,
CELL_PWRSAVE_
LOWPWR_CELLS
HD,
AUTO_PWROFF_R
FSLEEP,
CELL_PWRSAVE_I
NTERRAT_CELLS
HD,
CELL_PWRSAVE_
DYNADJVOLT

0~12 characters None None N/A Cell

BASIC_TYPE,
TWO_RRU_COMBI
NATION_TYPE,
SFN_TYPE,
BF_TYPE,
CELL_COMBINATI
None None N/A Cell
ON_TYPE,
DIGITAL_COMBINA
TION_TYPE,
MPRU_AGGREGA
TION_TYPE,
INVALID_TYPE

0~62 None None N/A Cell

4~254 None None N/A Cell

0~8 None None N/A Cell

UNINSTALL,
SYMBOL_SHUTDO None None N/A Cell
WN
-20~6553.5 None None N/A Cell

0~1048575 None None N/A Cell

0~7 None None N/A Cell

0~1 None None N/A Cell

0~5 None None N/A Cell

0~4294967295 None None N/A Cell

0~255 None None N/A Cell

 Radio Planning
0~2 None None Cell
(Internal planning)

Radio Planning
1~64 None None Cell
(Internal planning)
 If a valid operator
must be configured,
set this parameter
to a value within the
Default/Recommen
0~5,255 255 range of 0 to 5. If Cell
ded Value
an invalid operator
must be configured,
set this parameter
to 255.

0~12 characters None None N/A Cell

0~12 characters None None N/A Cell

0~12 None None N/A Cell

0~4 None None N/A Cell

0~4 None None N/A Cell

0~2 None None N/A Cell

0~2 None None N/A Cell

0~2 None None N/A Cell

0~1 None None N/A Cell

1~7 None None N/A Cell

0~35 None None N/A Cell

0~35 None None N/A Cell

ms5, ms10, ms20, Default/Recommen

ms10(ms10) ms10(ms10) Cell
ms40, ms80 ded Value
0~16 characters None None N/A Cell

0~32 characters None None N/A Cell

0~32 characters None None N/A Cell

PRIMARY,
SECONDARY, None None N/A Cell
INVALIDVALUE
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( Default/Recommen
Cell
BOOLEAN_TRUE True) True) ded Value

NOT_ALLOWED, ALLOWED(ALLOW ALLOWED(ALLOW Radio Planning

Cell
ALLOWED ED) ED) (Internal planning)
TRUNCATION, TRUNCATION(TRU Radio Planning
None Cell
NO_TRUNCATION NCATION) (Internal planning)

MACRO, MICRO MACRO(MACRO) MACRO(MACRO) Engineering Design Cell

 Radio Planning
0~31 0 0 Cell
(Internal planning)

RelaxedBH,
None None N/A Cell
IdealBH, other

0~1048575 None None N/A Cell

0~65535 None None N/A Cell

0~1048575 None None N/A Cell

 Radio Planning
0~60000 0 None Cell
(Internal planning)

INTERFHIGHSPEE
DSTATUS_NO_OP,
INTERFHIGHSPEE
None None N/A Cell
DSTATUS_ACT,
INTERFHIGHSPEE
DSTATUS_RENEW

0~65535 None None N/A Cell

0~1048575 None None N/A Cell

EUCELLSECTORE
QM,
None None N/A Cell
EUCELLSECTORE
QMGROUP

EUCELLSECTORE
QM,
None None N/A Cell
EUCELLSECTORE
QMGROUP

SUCCESS,
FAILURE, NA,
FAILURE_LOWSIN
None None N/A Cell
R,
FAILURE_BLOCKB
YTOPTASK

0~32 characters None None N/A Cell

INITIAL,
None None N/A Cell
PERIODIC, NA
Latest,
SecondLatest,
ThirdLatest,
FourthLatest,
FifthLatest,
None None N/A Cell
SixthLatest,
SeventhLatest,
EighthLatest,
NinthLatest,
TenthLatest

NONE, Default/Recommen
NONE(Normal cell) NONE(Normal cell) Cell
SPECSERCELL ded Value
 NORMAL(NORMAL Radio Planning
NORMAL, SPLIT NORMAL Cell
) (Internal planning)

Radio Planning
0~65535 None None SfnAuxResBind
(Internal planning)

Radio Planning
0~1048575 None None SfnAuxResBind
(Internal planning)
 Radio Planning
0~255 None None SfnAuxResBind
(Internal planning)

Default/Recommen
0~23,255 255 None SfnAuxResBind
ded Value
 Radio Planning
-60~50,32767 32767 None SfnAuxResBind
(Internal planning)

Default/Recommen
0~6 0 None SfnAuxResBind
ded Value
NO_COMPRESSIO
N,
NORMAL_COMPR Default/Recommen
NULL(Invalid) None SfnAuxResBind
ESSION, ded Value
ENHANCED_COM
PRESSION, NULL

AUTO_MODE_CF
G, AUTO_MODE_CF AUTO_MODE_CF Radio Planning
SfnAuxResBind
MANUAL_MODE_ G(AUTO_MOD) G(AUTO_MOD) (Internal planning)
CFG
 Radio Planning
0~35 None None SfnAuxResGrpBind
(Internal planning)

Radio Planning
0~1048575 None None SfnAuxResGrpBind
(Internal planning)
 Radio Planning
0~255 None None SfnAuxResGrpBind
(Internal planning)

Default/Recommen
0~23,255 255 None SfnAuxResGrpBind
ded Value
 Radio Planning
-60~50,32767 32767 None SfnAuxResGrpBind
(Internal planning)

Radio Planning
0~16 None None SfnAuxResGrpBind
(Internal planning)

Radio Planning
0~65535 None None SfnAuxResGrpBind
(Internal planning)
NO_COMPRESSIO
N,
NORMAL_COMPR Default/Recommen
NULL(Invalid) None SfnAuxResGrpBind
ESSION, ded Value
ENHANCED_COM
PRESSION, NULL

AUTO_MODE_CF
G, AUTO_MODE_CF AUTO_MODE_CF Radio Planning
SfnAuxResGrpBind
MANUAL_MODE_ G(AUTO_MOD) G(AUTO_MOD) (Internal planning)
CFG

Radio Planning
0~255 None None SfnCellBind
(Internal planning)

Radio Planning
0~1048575 None None SfnCellBind
(Internal planning)
 Radio Planning
0~255 None None CellBackOff
(Internal planning)

Default/Recommen
1~100 50 50 CellBackOff
ded Value
 Default/Recommen
1~10000 5 5 CellBackOff
ded Value
 Default/Recommen
1~100 10 10 CellBackOff
ded Value
 Default/Recommen
1~100 30 30 CellBackOff
ded Value
 Default/Recommen
0~28 5 5 CellBackOff
ded Value

Default/Recommen
0~28 10 10 CellBackOff
ded Value
 Default/Recommen
0~1, step:0.001 125 125 CellBackOff
ded Value

Default/Recommen
0~100 0 0 CellBackOff
ded Value
 Default/Recommen
0~28 5 5 CellBackOff
ded Value

Default/Recommen
0~28 10 10 CellBackOff
ded Value
 Default/Recommen
0~1, step:0.001 125 125 CellBackOff
ded Value

Default/Recommen
0~100 0 0 CellBackOff
ded Value
 Radio Planning
1~100 100 100 CellBackOff
(Internal planning)

Radio Planning
1~10000 100 100 CellBackOff
(Internal planning)
 Radio Planning
0.1~20, step:0.1 50 50 CellBackOff
(Internal planning)

Radio Planning
0~255 None None CellBf
(Internal planning)

SINGLE_LAYER_B
SINGLE_LAYER_B SINGLE_LAYER_B
F, Engineering Design CellBf
F(Single-Layer BF) F(Single-Layer BF)
DUAL_LAYER_BF

0~1048575 None None N/A CellBf

0~12 characters None None N/A CellBf

0~32 characters None None N/A CellBf

0~32 characters None None N/A CellBf

0~12 characters None None N/A CellBf

0~12 characters None None N/A CellBf

AUTO_CONFIG,
CIRCULAR_ANTE
NNA_ARRAY_BFA AUTO_CONFIG(AU
None Engineering Design CellBf
LG, TO_CONFIG)
LINEAR_ANTENNA
_ARRAY_BFALG

TWO_LAYERS, FOUR_LAYERS(F FOUR_LAYERS(F

Engineering Design CellBf
FOUR_LAYERS OUR_LAYERS) OUR_LAYERS)
PRE_MU_PRI_PAI
R_RULE, POST_MU_PF_PRI POST_MU_PF_PRI
POST_MU_PF_PRI _PAIR_RULE(POS _PAIR_RULE(POS
Engineering Design CellBf
_PAIR_RULE, T_MU_PF_PRI_PAI T_MU_PF_PRI_PAI
POST_MU_EFF_P R_RULE) R_RULE)
RI_PAIR_RULE

Radio Planning
0~255 None None CellCqiAdjAlgo
(Internal planning)
 Default/Recommen
0~100 10 10 CellCqiAdjAlgo
ded Value

Default/Recommen
-10~26 -4 -4 CellCqiAdjAlgo
ded Value
 Default/Recommen
0~10, step:0.01 10 10 CellCqiAdjAlgo
ded Value

HighSpeedFlag of
cell is set to
ULTRA_HIGH_SPE
ED:32;HighSpeedFl Default/Recommen
0~1, step:1/1024 256 CellCqiAdjAlgo
ag of cell is not set ded Value
to
ULTRA_HIGH_SPE
ED:256.

Radio Planning
0~255 None None CellCsiRsParaCfg
(Internal planning)
 It is recommended
that this parameter
be set to
NOT_CFG(Not
configure) when the
EnhMIMOSwitch
parameter value is
TM9Switch(TM9Swi
tch):Off.
It is recommended
that this parameter
NOT_CFG,
NOT_CFG(Not be set to Default/Recommen
FIXED_CFG, CellCsiRsParaCfg
configure) FIXED_CFG(Fixed ded Value
ADAPTIVE_CFG
configure) for LTE
FDD networks and
to
ADAPTIVE_CFG(A
DAPTIVE_CFG) for
LTE TDD networks
when the
EnhMIMOSwitch
parameter value is
TM9Switch(TM9Swi
tch):On.

ms5(ms5) is
recommended for
ms5, ms10, ms20, LTE FDD cells. Default/Recommen
ms5(ms5) CellCsiRsParaCfg
ms40, ms80 ms10(ms10) is ded Value
recommended for
LTE TDD cells.

NotConfigCsiRs,
None None N/A CellCsiRsParaCfg
ConfigCsiRs
 Default/Recommen
1~1200 10 10 CellCsiRsParaCfg
ded Value
 Default/Recommen
1~1200 200 200 CellCsiRsParaCfg
ded Value
 30 is recommended
for LTE FDD ASFN
cells.
30 is recommended
for LTE TDD 4T
Default/Recommen
0~100 50 cells. 50 is CellCsiRsParaCfg
ded Value
recommended for
LTE TDD 8T cells.
60 is recommended
for LTE TDD ASFN
cells.
 20 is recommended
for LTE FDD ASFN
cells.
20 is recommended
for LTE TDD 4T
Default/Recommen
0~100 40 cells. 40 is CellCsiRsParaCfg
ded Value
recommended for
LTE TDD 8T cells.
50 is recommended
for LTE TDD ASFN
cells.

Radio Planning
0~255 None None CellCspcPara
(Internal planning)

Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellCspcPara
ded Value
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellCspcPara
ded Value

Default/Recommen
1~60 30 30 CellCspcPara
ded Value
 Default/Recommen
100~5000 10 10 CellCspcPara
ded Value

Default/Recommen
0~1, step:0.01 0 FDD: 0; TDD: 25 CellCspcPara
ded Value

Default/Recommen
0~1, step:0.01 10 10 CellCspcPara
ded Value

Default/Recommen
0~1, step:0.01 20 20 CellCspcPara
ded Value
OFF, ON None None N/A CellCspcPara

CELL_INST_UNIN
STALL,
SWITCH_OFF,
NO_COMMAND,
ROUTE_FAILURE,
SCH_FAILURE,
HIGH_LOAD,
CLOCK_FAILURE,
NOT_IN_CLUSTER
None None N/A CellCspcPara
, SCTP_FAILURE,
GTPU_FAILURE,
LOW_PAYLOAD,
LINK_CONGESTIO
N, RTT_DELAY,
MULTI_CLUSTER_
ABNORMAL,
MODE_CONFLICT,
NULL, UNKNOWN

MACRO, MICRO,
None None N/A CellCspcPara
NA
DLCOMP_STATUS
_NORMAL,
CELL_STATUS_AB
NORMAL,
CLOCK_ABNORM
AL,
DLCOMP_SWITCH
_OFF_OR_NO_LIC
ENSE,
CLUSTER_ABNOR
MAL,
None None N/A CellCspcPara
LINK_ABNORMAL,
LINK_CONGESTIO
N, RTT_DELAY,
MULTI_CLUSTER_
ABNORMAL,
NO_COMMAND_R
ECEIVED,
CONTROL_NODE_
FAILURE,
OTHER_ABNORM
AL

Radio Planning
0~255 None None CellDss
(Internal planning)
0~20 0 None Engineering Design CellDss
0~20 0 None Engineering Design CellDss
OFF, ON OFF(Off) None Engineering Design CellDss
NONE,
BASEBANDPROC BASEBANDPROC
ESS, ESS(BASEBANDP None Engineering Design CellDss
ADAPTIVEPROCE ROCESS)
SS
-15~15 -20 None Engineering Design CellDss
-15~15 -20 None Engineering Design CellDss
0~15 0 None Engineering Design CellDss
0~15 0 None Engineering Design CellDss
0~15 2 None Engineering Design CellDss

ECOCONFIG( ECO
CONFIG), which
ECOCONFIG, ENODEBAIDCONF
enables smooth
ENODEBAIDCONF IG( ENODEBAIDC Engineering Design CellDss
upgrade and
IG ONFIG)
therefore is
recommended.
 Radio Planning CellDynAcBarAlgoP
0~255 None None
(Internal planning) ara

CellDynAcBarAlgoP
10~60 20 20 Engineering Design
ara

CellDynAcBarAlgoP
0~100 100 100 Engineering Design
ara
 CellDynAcBarAlgoP
0~100 80 80 Engineering Design
ara

CellDynAcBarAlgoP
1~1000 2 2 Engineering Design
ara
 CellDynAcBarAlgoP
1~1000 1 1 Engineering Design
ara
ETWS_PN, ETWS_PN:On, ETWS_PN:On,
CellDynAcBarAlgoP
ETWS_PN_TEST, ETWS_PN_TEST:O ETWS_PN_TEST:O Engineering Design
ara
CMAS ff, CMAS:Off ff, CMAS:Off

CellDynAcBarAlgoP
1~10080 60 60 Engineering Design
ara
 CellDynAcBarAlgoP
1~1000 2 2 Engineering Design
ara

CellDynAcBarAlgoP
1~1000 1 1 Engineering Design
ara

Radio Planning
0~255 None None CellEicic
(Internal planning)
SUBFRAME_THRE
E_PER_FIVE,
SUBFRAME_FOUR
_PER_FIVE,
SUBFRAME_0_TW
O_PER_20,
SUBFRAME_3_TW
O_PER_20,
SUBFRAME_4_TW
O_PER_20,
SUBFRAME_5_TW
O_PER_20,
SUBFRAME_8_TW
O_PER_20,
SUBFRAME_9_TW
O_PER_20,
SUBFRAME_4_9_T
HREE_PER_20, SUBFRAME_ONE_ SUBFRAME_ONE_
SUBFRAME_0_5_T PER_FIVE(One PER_FIVE(One Engineering Design CellEicic
HREE_PER_20, ABS per 5 ms) ABS per 5 ms)
SUBFRAME_3_8_T
HREE_PER_20,
SUBFRAME_3_4_9
_THREE_PER_20,
SUBFRAME_0_5_F
OUR_PER_20,
SUBFRAME_4_9_F
OUR_PER_20,
SUBFRAME_3_8_F
OUR_PER_20,
SUBFRAME_0_4_9
_FIVE_PER_20,
SUBFRAME_0_5_9
_FIVE_PER_20,
SUBFRAME_3_4_8
_9_FIVE_PER_20,
SUBFRAME_0_4_8
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) Engineering Design CellEicic
 Default/Recommen
-15~15 -10 -10 CellEicic
ded Value

1~300 10 10 Engineering Design CellEicic

 Radio Planning
1~1000000 200 200 CellEicic
(Internal planning)

Radio Planning
0~100 50 50 CellEicic
(Internal planning)
AUTO, Radio Planning
AUTO(AUTO) AUTO(AUTO) CellEicic
CONTROLLED (Internal planning)

Radio Planning
1~43200 10080 10080 CellEicic
(Internal planning)
 Radio Planning
0~255 None None CellFrameOffset
(Internal planning)

CustomFrameOffse
CustomFrameOffse
t, TL_FrameOffset, Default/Recommen
t(User-defined None CellFrameOffset
TL_FrameOffset_S ded Value
frame offset)
A2_SSP5
0~261120,275943~
0 None Engineering Design CellFrameOffset
307200

Radio Planning
0~255 None None CellIIcsPara
(Internal planning)

Radio Planning
-15~15 -30 -30 CellIIcsPara
(Internal planning)
 Radio Planning
-140~-44 -112 -112 CellIIcsPara
(Internal planning)

Radio Planning
0~255 None None CellLowPower
(Internal planning)

OFF, ON OFF(Off) OFF(Off) Engineering Design CellLowPower

 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellLowPower
ded Value

Default/Recommen
00:00:00~23:59:59 00:00:00 00:00:00 CellLowPower
ded Value

Default/Recommen
00:00:00~23:59:59 06:00:00 06:00:00 CellLowPower
ded Value
 Default/Recommen
0~1440 120 120 CellLowPower
ded Value

Default/Recommen
0~1440 120 120 CellLowPower
ded Value

Default/Recommen
0~1440 120 120 CellLowPower
ded Value
 Default/Recommen
10~100 50 50 CellLowPower
ded Value

Default/Recommen
-10~0 -1 -1 CellLowPower
ded Value
 Default/Recommen
1~1440 5 5 CellLowPower
ded Value
CUSTOMIZED,
POLICY1, CUSTOMIZED(Cus CUSTOMIZED(Cus Default/Recommen
CellLowPower
POLICY2, tomized) tomized) ded Value
POLICY3

Radio Planning
0~255 None None CellMBMSCfg
(Internal planning)

Radio Planning
0~255 None None CellMBMSCfg
(Internal planning)
0~65535 0 0 Engineering Design CellMBMSCfg

Radio Planning
0~2000 characters None None CellMBMSCfg
(Internal planning)

MBMSSwitch MBMSSwitch:Off MBMSSwitch:Off Engineering Design CellMBMSCfg

0~6 None None Engineering Design CellMBMSCfg

Radio Planning
1~65535 None None CellMBMSCfg
(Internal planning)
SERVICECONTINU SERVICECONTINU SERVICECONTINU Default/Recommen
CellMBMSCfg
ITYSWITCH ITYSWITCH:Off ITYSWITCH:Off ded Value
NEIGHCELLCONFI NEIGHCELLCONFI NEIGHCELLCONFI
Default/Recommen
GADAPTIVESWITC GADAPTIVESWITC GADAPTIVESWITC CellMBMSCfg
ded Value
H H:Off H:Off

Radio Planning
0~100 None None CellMBMSCfg
(Internal planning)

Radio Planning
0~255 None None CellMlbUeSel
(Internal planning)
 Radio Planning
0~255 255 255 CellMlbUeSel
(Internal planning)
 Radio Planning
0~255 0 0 CellMlbUeSel
(Internal planning)
 Radio Planning
0~255 0 0 CellMlbUeSel
(Internal planning)
 Radio Planning
0~255 0 0 CellMlbUeSel
(Internal planning)

Radio Planning
1~15 1 1 CellMlbUeSel
(Internal planning)
 Default/Recommen
0~28 0 0 CellMlbUeSel
ded Value

Radio Planning
0~255 None None CellMro
(Internal planning)
 NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design CellMro
configure) configure)
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1, dB24(24dB) dB24(24dB) Engineering Design CellMro
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24

dB-24, dB-22, dB-

20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
dB-1, dB0, dB1, dB-24(-24dB) dB-24(-24dB) Engineering Design CellMro
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24
 Default/Recommen
-140~-43 -99 None CellMro
ded Value

Default/Recommen
-140~-43 -115 None CellMro
ded Value

Default/Recommen
-140~-43 -89 None CellMro
ded Value

Default/Recommen
-140~-43 -115 None CellMro
ded Value
 InterfreqA1RsrpSwit
InterfreqA1RsrpSwit
ch:Off,
ch,
InterfreqA2RsrpSwit
InterfreqA2RsrpSwit
ch:On,
ch,
A3InterfreqA1Rsrp
A3InterfreqA1Rsrp
Switch:Off,
Switch,
A3InterfreqA2Rsrp Default/Recommen
A3InterfreqA2Rsrp None CellMro
Switch:On, ded Value
Switch,
InterfreqA3CioSwitc
InterfreqA3CioSwitc
h:On,
h,
InterfreqA4CioSwitc
InterfreqA4CioSwitc
h:On,
h,
InterfreqA5Switch:
InterfreqA5Switch
On

0~255 None None N/A CellPcAlgo

SRSPC_SINR_BAS
SRSPC_SINR_BAS SrsPcStrategy:SRS
ED,
ED( SRSPC_SINR_ PC_SINR_RSRP_B Engineering Design CellPcAlgo
SRSPC_SINR_RS
BASED) ASED
RP_BASED
NOT_USE_P0NOM NOT_USE_P0NOM NOT_USE_P0NOM
INALPUCCH, INALPUCCH(Not INALPUCCH(Not Default/Recommen
CellPcAlgo
USE_P0NOMINAL Use Use ded Value
PUCCH P0NominalPUCCH) P0NominalPUCCH)

Default/Recommen
20~200 10 10 CellPcAlgo
ded Value
 Default/Recommen
0~15 0 0 CellPcAlgo
ded Value

Default/Recommen
-126~24 -82 -82 CellPcAlgo
ded Value
-15~15 -10 -10 Engineering Design CellPcAlgo
 ON
In scenarios where
the IoT value is
greater than 7 dB, it
is recommended
Default/Recommen
OFF, ON OFF(Off) that this parameter CellPcAlgo
ded Value
be set to ON to
ensure the average
cell throughput after
IoT power control is
enabled.
80dB, 85dB, 90dB,
95dB, 100dB,
105dB, 110dB,
115dB, 120dB,
110dB 110dB Engineering Design CellPcAlgo
125dB, 130dB,
135dB, 140dB,
145dB, 150dB,
155dB, 160dB
 Default/Recommen
-50~50 1 1 CellPcAlgo
ded Value
 Default/Recommen
-140~-43 -118 -118 CellPcAlgo
ded Value
 Set this parameter
to 8 when the
network load is
light, which leads to
1, 2, 3, 4, 5, 6, 7, 8, optimal uplink
9, 10, 11, 12, 13, throughput.
8 Engineering Design CellPcAlgo
14, 15, 16, Set this parameter
ADAPTIVE to ADAPTIVE when
the network load is
heavy, which leads
to optimal uplink
throughput.
 If interference from
an external source
exists, set this
parameter to
UsOrUlBigPkt after
the
CloseLoopOptPUS
CHSwitch(CloseLoo
Normal, Us, pOptPUSCHSwitch)
ULBigPkt, Normal(0) check box under Engineering Design CellPcAlgo
UsOrUlBigPkt the UlPcAlgoSwitch
parameter is
selected, which
reduces the
interference on
neighboring cells
caused by
optimized closed-
loop power control.
 Radio Planning
0~0.1, step:0.01 2 2 CellPcAlgo
(Internal planning)
1, 2, 3, 4, 5, 6, 7, 8,
9, 10, 11, 12, 13, Radio Planning
8 8 CellPcAlgo
14, 15, 16, (Internal planning)
SameAsNs
 ON
It is recommended
that this parameter
be set to ON when
interference-based
uplink power control
OFF, ON OFF(Off) Engineering Design CellPcAlgo
is enabled. This
ensures
interference-based
uplink power control
to be enabled more
accurately.

70~140 125 125 Engineering Design CellPcAlgo

-118~-100 -111 -111 Engineering Design CellPcAlgo
 UlBigPktUser
If inter-RAT
interference exists
and the
NearPointUeOptPU
SCHSwitch option
of the
UlPcAlgoSwitch
parameter is
AllUser, selected, you are Default/Recommen
AllUser(AllUser) CellPcAlgo
UlBigPktUser advised to set this ded Value
parameter to
UlBigPktUser to
decrease
interference on
neighboring cells
caused by the
PUSCH power
increase for UEs
near the cell center.
 When the network
is heavily loaded
(for example, the
network has
multiple cells with
each cell serving
200 UEs among
which 20 UEs run
voice services), it is
-10~0 0 Engineering Design CellPcAlgo
recommended that
this parameter be
set to -30 to
decrease
interference from
UEs running voice
services near the
cell center on
neighboring cells.

0~255 None None N/A CellPrbValMlb

1~100 80 80 N/A CellPrbValMlb
1~100 80 80 N/A CellPrbValMlb

0~50 0 0 N/A CellPrbValMlb

 Default/Recommen
0.01~1 10 10 CellPrbValMlb
ded Value

Radio Planning
0~255 None None CellRachAlgo
(Internal planning)
 Radio Planning
0~100000 0 None CellRachAlgo
(Internal planning)
 Radio Planning
-100~1000 0 None CellRachAlgo
(Internal planning)

Radio Planning
00~99,000~999 None None CellRachAlgo
(Internal planning)
 Radio Planning
0~1048575 None None CellRachAlgo
(Internal planning)

Radio Planning
0~255 None None CellRachAlgo
(Internal planning)

Radio Planning
000~999 None None CellRachAlgo
(Internal planning)
 Default/Recommen
10~600 30 None CellRachAlgo
ded Value

Default/Recommen
-115~-80 -108 None CellRachAlgo
ded Value
 Default/Recommen
5~35 5 None CellRachAlgo
ded Value

Radio Planning
0~255 None None CellRacThd
(Internal planning)

1~15 5 5 Engineering Design CellRacThd

1~15 10 10 Engineering Design CellRacThd

10~99 90 90 Engineering Design CellRacThd

10~99 90 90 Engineering Design CellRacThd

10~99 90 90 Engineering Design CellRacThd

10~99 90 90 Engineering Design CellRacThd

0~90 5 5 Engineering Design CellRacThd

0~90 5 5 Engineering Design CellRacThd
0~90 5 5 Engineering Design CellRacThd
0~99 65 65 Engineering Design CellRacThd
0~99 65 65 Engineering Design CellRacThd
0~99 65 65 Engineering Design CellRacThd
0~99 65 65 Engineering Design CellRacThd
0~50 20 20 Engineering Design CellRacThd
10~100 95 95 Engineering Design CellRacThd
10~100 90 90 Engineering Design CellRacThd

0~30 0 0 Engineering Design CellRacThd

0~100 30 30 Engineering Design CellRacThd

1~10 5 5 Engineering Design CellRacThd

Radio Planning
0~255 None None CellRfShutdown
(Internal planning)
OFF, ON OFF(Off) OFF(Off) Engineering Design CellRfShutdown

Default/Recommen
00:00:00~23:59:59 00:00:00 00:00:00 CellRfShutdown
ded Value

Default/Recommen
00:00:00~23:59:59 06:00:00 06:00:00 CellRfShutdown
ded Value

0~7 3 3 Engineering Design CellRfShutdown

0~100 0 0 Engineering Design CellRfShutdown
0~100 0 0 Engineering Design CellRfShutdown
0~100 0 0 Engineering Design CellRfShutdown
0~100 0 0 Engineering Design CellRfShutdown
 Default/Recommen
0~20 0 0 CellRfShutdown
ded Value
UE_CONNECTED_
EXCEED,
LOAD_SIMULATIO
N_ENABLED,
LCS_ENABLED,
RF_INTELLIGENT_
SHUTDOWN,
DELAY_FOR_30MI
NUTES,
WRONG_REQ_FO
R_PA_CCE, None None N/A CellRfShutdown
WRONG_ANTENN
AS_NUM,
POWER_INFSUFFI
CIENT,
SWITCH_OFF,
OTHERS,
MBSFN_ENABLED
, QCI1_UE_EXIST,
RB_RATIO_EXCEE
D
SWITCH_TURN_O
FF,
TIME_EXPIRES,
UE_CONNECTED_
EXCEED,
POWER_INSUFFIC
IENT,
INITIAL_ENTERIN
G, None None N/A CellRfShutdown
LOAD_SIMULATIO
N_ENABLE,
LCS_ENABLED,
OTHERS,
MBSFN_ENABLED
, QCI1_UE_EXIST,
RB_RATIO_EXCEE
D

Radio Planning
0~255 None None CellRicAlgo
(Internal planning)
 The value OFF is
recommended if
there is no remote
interference to the
cell.
OFF, ON OFF(Off) Engineering Design CellRicAlgo
The value ON is
recommended if
there is remote
interference to the
cell.

The value 0 is
recommended if
there is no remote
interference to the
cell.
0~2 0 Engineering Design CellRicAlgo
The value 1 is
recommended if
there is remote
interference to the
cell.
 Radio Planning
OFF, ON OFF(Off) OFF(Off) CellRicAlgo
(Internal planning)

Radio Planning
0~255 None None CellServiceDiffCfg
(Internal planning)
 CellConStaReportS CellConStaReportS
CellConStaReportS
witch:Off, witch:Off,
witch,
FPIGTPUSwitch:Off FPIGTPUSwitch:Off
FPIGTPUSwitch,
, ,
DSCPRemarkSwitc Engineering Design CellServiceDiffCfg
DSCPRemarkSwitc DSCPRemarkSwitc
h,
h:Off, h:Off,
CellUuConStaRepo
CellUuConStaRepo CellUuConStaRepo
rtSwitch
rtSwitch:Off rtSwitch:Off
 Default/Recommen
1~100 75 75 CellServiceDiffCfg
ded Value
 Default/Recommen
1~100 85 85 CellServiceDiffCfg
ded Value
 Default/Recommen
1~10000 150 150 CellServiceDiffCfg
ded Value
 Default/Recommen
1~10000 200 200 CellServiceDiffCfg
ded Value
0~1, step:0.01 10 10 Engineering Design CellServiceDiffCfg
0~1, step:0.01 1 1 Engineering Design CellServiceDiffCfg
0~1, step:0.01 10 10 Engineering Design CellServiceDiffCfg

0~1, step:0.01 10 10 Engineering Design CellServiceDiffCfg

0~1, step:0.01 10 10 Engineering Design CellServiceDiffCfg

0~1, step:0.01 10 10 Engineering Design CellServiceDiffCfg

0~1, step:0.01 10 10 Engineering Design CellServiceDiffCfg

Radio Planning
0~255 None None CellShutdown
(Internal planning)

OFF, ON OFF(Off) OFF(Off) Engineering Design CellShutdown

 Default/Recommen
00:00:00~23:59:59 00:00:00 00:00:00 CellShutdown
ded Value

Default/Recommen
00:00:00~23:59:59 06:00:00 06:00:00 CellShutdown
ded Value

Default/Recommen
0~100 20 20 CellShutdown
ded Value

Default/Recommen
0~100 20 20 CellShutdown
ded Value

Default/Recommen
0~100 20 20 CellShutdown
ded Value
 Default/Recommen
0~100 20 20 CellShutdown
ded Value

Radio Planning
0~255 None None CellSrlte
(Internal planning)
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellSrlte
ded Value
 Default/Recommen
1~15 6 6 CellSrlte
ded Value
 Default/Recommen
1~120 10 10 CellSrlte
ded Value

Radio Planning
0~255 None None CellULIcicMcPara
(Internal planning)
 Default/Recommen
-15~15 -10 -10 CellULIcicMcPara
ded Value

Radio Planning
0~255 None None CellUlschAlgo
(Internal planning)
 Scenario A: The
EPF policy is
recommended on
live networks.
Scenario B: The
MAX_CI policy is
recommended
when the operator
or Huawei desires
to verify the system
performance in
maximum
capacities.
ULSCH_STRATEG Scenario C: The PF
Y_EPF, policy is
ULSCH_STRATEG recommended
Y_MAX_CI, ULSCH_STRATEG when the operator Default/Recommen
CellUlschAlgo
ULSCH_STRATEG Y_EPF(EPF) or Huawei desires ded Value
Y_PF, to verify the system
ULSCH_STRATEG performance in
Y_RR scenarios where
the capacity,
coverage, and
fairness reach a
tradeoff.
Scenario D: The RR
policy is
recommended
when the operator
or Huawei desires
to verify that each
UE has an equal
opportunity to be
scheduled.
ADAPTIVE_HARQ_
SW_ON,
ADAPTIVE_HARQ_ ADAPTIVE_HARQ_
ADAPTIVE_HARQ_
SW_SEMI_ON(Se SW_SEMI_ON(Se Engineering Design CellUlschAlgo
SW_OFF,
miOn) miOn)
ADAPTIVE_HARQ_
SW_SEMI_ON
0.01~0.99, Default/Recommen
10 10 CellUlschAlgo
step:0.01 ded Value

In cells with the

bandwidth of 1.4
MHz, it is
recommended that
this parameter be
set to 50 for Default/Recommen
0~100 25 CellUlschAlgo
preallocation UEs ded Value
within each TTI. In
cells with other
bandwidths, the
recommended
value is 25.
 Default/Recommen
1~40 5 5 CellUlschAlgo
ded Value

Default/Recommen
45~1500 80 80 CellUlschAlgo
ded Value
HOPPING_OFF,
HOPPING_TYPE1,
HOPPING_OFF(Ho HOPPING_OFF(Ho Default/Recommen
HOPPING_TYPE2, CellUlschAlgo
pping off) pping off) ded Value
HOPPING_TYPE2_
RANDOM
 Default/Recommen
0~100 0 0 CellUlschAlgo
ded Value
 Default/Recommen
16~15000 600 600 CellUlschAlgo
ded Value

Scenario A: The
recommended
value is 3 if the cell
serves a large
number of cell
center users Default/Recommen
2~3 2 CellUlschAlgo
(CCUs). ded Value
Scenario B: The
recommended
value is 2 in
commercial
networks.
 Default/Recommen
0~2000 50 50 CellUlschAlgo
ded Value

EPF_CAPC_FACT
OR_1,
EPF_CAPC_FACT
OR_0DOT01,
EPF_CAPC_FACT
OR_0DOT5, EPF_CAPC_FACT EPF_CAPC_FACT Default/Recommen
CellUlschAlgo
EPF_CAPC_FACT OR_1(1) OR_1(1) ded Value
OR_2,
EPF_CAPC_FACT
OR_3,
EPF_CAPC_FACT
OR_4
FS_NONFS_ADAP FS_INRANDOM_A FS_INRANDOM_A
TIVE, DAPTIVE(Fs DAPTIVE(Fs
Engineering Design CellUlschAlgo
FS_INRANDOM_A InRandom InRandom
DAPTIVE Strategy) Strategy)
CLASS_0, CLASS_0(CLASS_ Default/Recommen
CLASS_0(0) CellUlschAlgo
CLASS_1 0) ded Value
 Default/Recommen
1~8 5 5 CellUlschAlgo
ded Value
 The parameter
value 1500 is
recommended for
ping services.
The Default/Recommen
0~2000 1500 CellUlschAlgo
SmartPreAllocation ded Value
Duration parameter
value is
recommended for
non-ping services.
ms20, ms40, Default/Recommen
ms20(20ms) ms20(20ms) CellUlschAlgo
ADAPTIVE ded Value
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellUlschAlgo
ded Value

Default/Recommen
0~4 0 0 CellUlschAlgo
ded Value
NO_DELAYSCH,
VOIP_DELAYSCH,
NO_DELAYSCH(N NO_DELAYSCH(N
VOIP_DELAYSCH_ Default/Recommen
o Delay o Delay CellUlschAlgo
DIVISION, ded Value
Scheduling) Scheduling)
VOIP_AND_DATA_
DELAYSCH
 Default/Recommen
6~120 15 15 CellUlschAlgo
ded Value
 Default/Recommen
0~100000 4000 4000 CellUlschAlgo
ded Value

OFF(Off) is
recommended
when
SpsSchSwitch of
the UlSchSwitch
parameter is off; Default/Recommen
OFF, ON OFF(Off) CellUlschAlgo
ON is ded Value
recommended
when
SpsSchSwitch of
the UlSchSwitch
parameter is on.
 The value
ADAPTIVE_RETX
is recommended for
NEW_TX, ADAPTIVE_RETX( this parameter Default/Recommen
CellUlschAlgo
ADAPTIVE_RETX ADAPTIVE_RETX) when ded Value
PuschDtxSwitch of
the UlSchSwitch
parameter is on.
 20 is recommended
for LTE FDD cells.
In LTE TDD cells,
the recommended
values vary with
uplink-downlink
subframe
configurations:
12 for uplink-
downlink subframe
configuration 0;
8 for uplink-
downlink subframe
configuration 1;
Radio Planning
0~20 0 4 for uplink- CellUlschAlgo
(Internal planning)
downlink subframe
configuration 2;
6 for uplink-
downlink subframe
configuration 3;
4 for uplink-
downlink subframe
configuration 4;
2 for uplink-
downlink subframe
configuration 5;
10 for uplink-
downlink subframe
configuration 6;
 UlVoipPreAllocation
UlVoipPreAllocation UlVoipPreAllocation Swtich:Off,
Swtich, Swtich:Off, UlVoipDelaySchSwi
UlVoipDelaySchSwi UlVoipDelaySchSwi tch:Off,
tch, tch:Off, UlVoIPLoadBasedS
UlVoIPLoadBasedS UlVoIPLoadBasedS chSwitch:Off,
chSwitch, chSwitch:Off, UlVoipSchOptSwitc
UlVoipSchOptSwitc UlVoipSchOptSwitc h:Off, Default/Recommen
CellUlschAlgo
h, h:Off, UlVoLTEDataSizeE ded Value
UlVoLTEDataSizeE UlVoLTEDataSizeE stSwitch:Off,
stSwitch, stSwitch:Off, UlVoipServStateEn
UlVoipServStateEn UlVoipServStateEn hancedSw:Off,
hancedSw, hancedSw:Off, UlSpsTtibRestraint
UlVoipRblerControl UlVoipRblerControl Switch:Off,
Switch Switch:Off UlVoipRblerControl
Switch:Off
 Default/Recommen
-50~50 0 0 CellUlschAlgo
ded Value
 Default/Recommen
-15~15 -20 -20 CellUlschAlgo
ded Value
N5_TTIB_ENTER,
N10_TTIB_ENTER, N10_TTIB_ENTER( N10_TTIB_ENTER( Default/Recommen
CellUlschAlgo
N15_TTIB_ENTER, 10) 10) ded Value
N20_TTIB_ENTER
N10_TTIB_EXIT,
N20_TTIB_EXIT, N20_TTIB_EXIT(20 N20_TTIB_EXIT(20 Default/Recommen
CellUlschAlgo
N40_TTIB_EXIT, ) ) ded Value
N80_TTIB_EXIT
 Default/Recommen
3~6 5 5 CellUlschAlgo
ded Value
 4 is recommended
for LTE FDD cells.
In LTE TDD cells,
the recommended
values vary with
uplink-downlink
subframe
configurations:
Default/Recommen
0~7 4 3 for uplink- CellUlschAlgo
ded Value
downlink subframe
configuration 0;
2 for uplink-
downlink subframe
configuration 1;
2 for uplink-
downlink subframe
configuration 6;

n16(16) is
recommended for
LTE FDD cells.
In LTE TDD cells,
the recommended
values vary with
uplink-downlink
subframe
n4, n8, n12, n16, configurations: Default/Recommen
n16(16) CellUlschAlgo
n20, n24, n28 n8(8) for uplink- ded Value
downlink subframe
configuration 0;
n12(12) for uplink-
downlink subframe
configuration 1;
n8(8) for uplink-
downlink subframe
configuration 6;
SERVICE_VOIP,
SERVICE_VOIP(S SERVICE_VOIP(S Default/Recommen
SERVICE_MULTIA CellUlschAlgo
ERVICE_VOIP) ERVICE_VOIP) ded Value
PP
FastReportDopSwit FastReportDopSwit FastReportDopSwit Default/Recommen
CellUlschAlgo
ch ch:Off ch:Off ded Value
 Default/Recommen
OFF, ON OFF(OFF) OFF(OFF) CellUlschAlgo
ded Value
 Default/Recommen
0~10000 10000 10000 CellUlschAlgo
ded Value
 Default/Recommen
0~1000000 10000 10000 CellUlschAlgo
ded Value
 The parameter
value 48bit is
recommended in
scenarios where
0bit, 32bit, 48bit, RLC initial
Default/Recommen
64bit, 80bit, 96bit, 0bit transmission is CellUlschAlgo
ded Value
128bit performed on a
single service and
the MAC layer
sends BSRs or
PHRs.

SAME_AS_OTHER SAME_AS_OTHER
_SERVICE, 1ms, _SERVICE(SAME_ SAME_AS_OTHER Default/Recommen
CellUlschAlgo
2ms, 3ms, 4ms, AS_OTHER_SERVI _SERVICE ded Value
5ms CE)
SAME_AS_OTHER
_SERVICE,
SAME_AS_OTHER
80BYTE, 160BYTE,
_SERVICE(SAME_ SAME_AS_OTHER Default/Recommen
320BYTE, CellUlschAlgo
AS_OTHER_SERVI _SERVICE ded Value
640BYTE,
CE)
1280BYTE,
2560BYTE

TWO_MODE_BAS
ED_ON_PCI, TWO_MODE_BAS TWO_MODE_BAS Default/Recommen
CellUlschAlgo
THREE_MODE_BA ED_ON_PCI ED_ON_PCI(On) ded Value
SED_ON_PCI
 Radio Planning
0.01~0.99 10 10 CellUlschAlgo
(Internal planning)
 Radio Planning
2~1800 1800 1800 (Negotiation with CellUlschAlgo
the peer)

2LAYER, 3LAYER, Default/Recommen

4LAYER(4LAYER) 4LAYER(4LAYER) CellUlschAlgo
4LAYER ded Value
 The value
INTERVAL_10 is
recommended in
INTERVAL_5, competitive tests,
INTERVAL_10, the value
INTERVAL_20, INTERVAL_20 is
INTERVAL_30, INTERVAL_ADAPT recommended in
Default/Recommen
INTERVAL_40, IVE(INTERVAL_AD networks with light- CellUlschAlgo
ded Value
INTERVAL_50, APTIVE) loaded voice
INTERVAL_60, services, and the
INTERVAL_ADAPT value
IVE INTERVAL_ADAPT
IVE is
recommended in
other scenarios.
 The value
INTERVAL_10 is
recommended in
INTERVAL_10, competitive tests,
INTERVAL_20, the value
INTERVAL_30, INTERVAL_50 is
INTERVAL_40, INTERVAL_160(IN recommended in Default/Recommen
CellUlschAlgo
INTERVAL_50, TERVAL_160) networks with light- ded Value
INTERVAL_70, loaded voice
INTERVAL_80, services, and the
INTERVAL_160 value
INTERVAL_80 is
recommended in
other scenarios.
SinrFlunIBlerAdapt SinrFlunIBlerAdapt SinrFlunIBlerAdapt
Switch, Switch:Off, Switch:Off, Default/Recommen
CellUlschAlgo
SinrJumpIBlerAdapt SinrJumpIBlerAdapt SinrJumpIBlerAdapt ded Value
Switch Switch:Off Switch:Off
CsiOnly, Default/Recommen
CsiOnly(CsiOnly) CsiOnly(CsiOnly) CellUlschAlgo
CsiWiUlService ded Value

Radio Planning
0~94 0 0 CellUlschAlgo
(Internal planning)
N5, N10, N15, N20,
Radio Planning
N25, N30, N35, N5(5) N5(5) CellUlschAlgo
(Internal planning)
N40, N45, N50
 Default/Recommen
OFF, ON ON(On) ON(On) CellUlschAlgo
ded Value

VmimoOptResSwitc VmimoOptResSwitc VmimoOptResSwitc Default/Recommen

CellUlschAlgo
h h:Off h:Off ded Value
 Default/Recommen
-121~-90 -121 -121 CellUlschAlgo
ded Value

0~255 None None N/A CellULUnifiedOLC

 Default/Recommen
0~200 50 50 CellULUnifiedOLC
ded Value
 Default/Recommen
0~200 10 10 CellULUnifiedOLC
ded Value
 Default/Recommen
1~20000 2000 2000 CellULUnifiedOLC
ded Value
 Default/Recommen
1~20000 1000 1000 CellULUnifiedOLC
ded Value
 Default/Recommen
1~1200 400 400 CellULUnifiedOLC
ded Value
 Default/Recommen
1~1200 250 250 CellULUnifiedOLC
ded Value

Radio Planning
0~255 None None eNBCellRsvdPara
(Internal planning)
 Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit8:
0,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit9:
1,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
2,
0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
3,
1:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
4,
2:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
5,
3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
6,
4:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
7,
5:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
8,
6:Off, Default/Recommen
RsvdSwPara0_bit1 None eNBCellRsvdPara
RsvdSwPara0_bit1 ded Value
9,
7:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
0,
8:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
1,
9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
2,
0:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
3,
1:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
4,
2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
5,
3:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
6,
4:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
7,
5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
 Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit8:
0,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit9:
1,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
2,
0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
3,
1:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
4,
2:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
5,
3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
6,
4:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
7,
5:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
8,
6:Off, Default/Recommen
RsvdSwPara1_bit1 None eNBCellRsvdPara
RsvdSwPara1_bit1 ded Value
9,
7:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
0,
8:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
1,
9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
2,
0:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
3,
1:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
4,
2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
5,
3:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
6,
4:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
7,
5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
 On,
RsvdSwPara2_bit1
RsvdSwPara2_bit8:
0,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit9:
1,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
2,
0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
3,
1:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
4,
2:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
5,
3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
6,
4:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
7,
5:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
8,
6:On, Default/Recommen
RsvdSwPara2_bit1 None eNBCellRsvdPara
RsvdSwPara2_bit1 ded Value
9,
7:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
0,
8:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
1,
9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
2,
0:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
3,
1:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
4,
2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
5,
3:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
6,
4:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
7,
5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
 Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit8:
0,
Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit9:
1,
Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
2,
0:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
3,
1:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
4,
2:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
5,
3:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
6,
4:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
7,
5:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
8,
6:Off, Default/Recommen
RsvdSwPara3_bit1 None eNBCellRsvdPara
RsvdSwPara3_bit1 ded Value
9,
7:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit1
0,
8:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit1
1,
9:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
2,
0:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
3,
1:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
4,
2:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
5,
3:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
6,
4:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
7,
5:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBCellRsvdPara
ded Value

Radio Planning InterRatCellShutdo

0~255 None None
(Internal planning) wn

InterRatCellShutdo
OFF, ON OFF(Off) OFF(Off) Engineering Design
wn

Default/Recommen InterRatCellShutdo
00:00:00~23:59:59 03:00:00 03:00:00
ded Value wn
 Default/Recommen InterRatCellShutdo
00:00:00~23:59:59 05:00:00 05:00:00
ded Value wn

Default/Recommen InterRatCellShutdo
0~5000 20 20
ded Value wn
 Default/Recommen InterRatCellShutdo
0~100 10 10
ded Value wn
 Default/Recommen InterRatCellShutdo
0~100 10 10
ded Value wn
BY_UTRAN_WITH
OUT_LOAD,
BY_UTRAN_WITH
BY_UTRAN_WITH
_LOAD,
OUT_LOAD(By Default/Recommon InterRatCellShutdo
BY_GERAN_WITH None
UTRAN without ded Value wn
_LOAD,
load)
BY_UTRAN_AND_
GERAN_WITH_LO
AD

Default/Recommon InterRatCellShutdo
1~15 5 5
ded Value wn
 Default/Recommon InterRatCellShutdo
0~100 30 30
ded Value wn
 Default/Recommon InterRatCellShutdo
0~100 40 40
ded Value wn
 Default/Recommon InterRatCellShutdo
0~100 15 15
ded Value wn
 Default/Recommon InterRatCellShutdo
0~100 40 40
ded Value wn
 Default/Recommon InterRatCellShutdo
0~100 25 25
ded Value wn
 InterRatCellShutdo
0~100 20 20 N/A
wn

Radio Planning
0~255 None None NCellSrsMeasPara
(Internal planning)
 Default/Recommen
OFF, ON OFF(Off) None NCellSrsMeasPara
ded Value

Default/Recommen
-15~15 -20 -20 NCellSrsMeasPara
ded Value

Radio Planning
0~255 None None RruJointCalParaCfg
(Internal planning)
 ON(On) for 4T4R or Default/Recommen
OFF, ON OFF(Off) RruJointCalParaCfg
4T8R cells ded Value

Default/Recommen
00:00:00~23:59:59 03:00:00 03:00:00 RruJointCalParaCfg
ded Value
 Default/Recommen
0.5~720 48 48 RruJointCalParaCfg
ded Value

Equipment
0~10 0 0 RruJointCalParaCfg
Planning
 Radio Planning
0~255 None None SuperCombCell
(Internal planning)

Radio Planning
0~99 None None SuperCombCell
(Internal planning)

Radio Planning
0~255 None None ULZeroBufferZone
(Internal planning)

0~99 0 0 Engineering Design ULZeroBufferZone

0~99 5 5 Engineering Design ULZeroBufferZone

0~100 25 25 Engineering Design ULZeroBufferZone

0~100 5 5 Engineering Design ULZeroBufferZone

-140~-43 -80 -80 Engineering Design ULZeroBufferZone

1~60 20 20 Engineering Design ULZeroBufferZone

0~20 5 5 Engineering Design ULZeroBufferZone

-120~-25 -103 -103 Engineering Design ULZeroBufferZone

0~600 30 30 Engineering Design ULZeroBufferZone

 Default/Recommen
0~255 None None UpPTSInterfCfg
ded Value

Default/Recommen
50~600 50 50 UpPTSInterfCfg
ded Value

Default/Recommen
-115~-80 -100 -100 UpPTSInterfCfg
ded Value
 Default/Recommen
5~35 15 15 UpPTSInterfCfg
ded Value

Default/Recommen
0~255 None None UserVpfmPara
ded Value

Default/Recommen
0~1048576 500 500 UserVpfmPara
ded Value
 Default/Recommen
0~1048576 1024 1024 UserVpfmPara
ded Value

Default/Recommen
0~1048576 2048 2048 UserVpfmPara
ded Value

Default/Recommen
0~1048576 5120 5120 UserVpfmPara
ded Value
 Default/Recommen
0~1048576 10240 10240 UserVpfmPara
ded Value

Default/Recommen
0~10000 150 150 UserVpfmPara
ded Value

Default/Recommen
0~10000 250 250 UserVpfmPara
ded Value
 Default/Recommen
0~10000 150 150 UserVpfmPara
ded Value
 Default/Recommen
0~10000 250 250 UserVpfmPara
ded Value

Radio Planning
0~255 None None WtcpProxyAlgo
(Internal planning)
 Radio Planning
OFF, ON OFF(OFF) OFF(OFF) WtcpProxyAlgo
(Internal planning)

Radio Planning
OFF, ON OFF(OFF) OFF(OFF) WtcpProxyAlgo
(Internal planning)
 Radio Planning
100~3000 300 300 WtcpProxyAlgo
(Internal planning)

Radio Planning
0~255 None None CellAlgoSwitch
(Internal planning)
 RachAdjSwitch:Off, RachAdjSwitch:Off,
RachAdjSwitch, HoRaSwitch:On, HoRaSwitch:On,
HoRaSwitch, UnsyncRaSwitch:O UnsyncRaSwitch:O
UnsyncRaSwitch, n, n,
MaksIdxSwitch, MaksIdxSwitch:Off, MaksIdxSwitch:Off,
BackOffSwitch, BackOffSwitch:Off, BackOffSwitch:Off,
UeRaInforInqSwitch UeRaInforInqSwitch UeRaInforInqSwitch
, :Off, :Off,
Engineering Design CellAlgoSwitch
PRACHFalseAlarm PRACHFalseAlarm PRACHFalseAlarm
DetSwitch, DetSwitch:Off, DetSwitch:Off,
RachPwrAdjSwitch, RachPwrAdjSwitch: RachPwrAdjSwitch:
ForbidAcByRadiusS Off, Off,
witch, ForbidAcByRadiusS ForbidAcByRadiusS
PrachFreqAdjSwitc witch:Off, witch:Off,
h PrachFreqAdjSwitc PrachFreqAdjSwitc
h:Off h:Off
SrsSubframeRecfS SrsSubframeRecfS SrsSubframeRecfS
Engineering Design CellAlgoSwitch
witch witch:On witch:On
 PucchSwitch:
In ultra-high-speed
scenarios, the
recommended
value is Off.
In other scenarios,
the recommended
value is On.
PucchFlexCfgSwitc
h:
If PUCCHs
experience
interference, the
recommended
PucchSwitch, PucchSwitch:On,
value is On.
PucchFlexCfgSwitc PucchFlexCfgSwitc
If PUCCHs do not
h, h:Off, Engineering Design CellAlgoSwitch
experience
Dl2CCAckResShar Dl2CCAckResShar
interference, the
eSw eSw:Off
recommended
value is Off.
Dl2CCAckResShar
eSw:
If the number of
SCCs associated
with a PCC is less
than 2, equal to 2,
or greater than 8,
the recommended
value is On.
In other scenarios,
the recommended
value is Off.

AqmAlgoSwitch AqmAlgoSwitch:Off AqmAlgoSwitch:Off Engineering Design CellAlgoSwitch

 TddMultiplexingCqi
AdjOptSwitch:Off,
AdaptiveStepVaryS
witch:Off,
DlCqiAdjDeltaOptS
CqiAdjAlgoSwitch:O
witch:Off,
CqiAdjAlgoSwitch, n,
DlEnVarIblerTarget
StepVarySwitch, StepVarySwitch:Off,
Switch:Off,
DlVarIBLERtargetS DlVarIBLERtargetS
DlRetxTbsIndexAdj
witch, witch:Off,
OptSwitch:Off,
TddBundlingCqiAdj TddBundlingCqiAdj
DlSpsMcsIncrease
OptSwitch, OptSwitch:Off,
Switch:Off,
TddMultiplexingCqi TddMultiplexingCqi
RptCqiFltInitSwitch:
AdjOptSwitch, AdjOptSwitch:Off,
Off,
AdaptiveStepVaryS AdaptiveStepVaryS
CqiAdjTimeEffSwitc
witch, witch:Off,
h:Off,
DlCqiAdjDeltaOptS DlCqiAdjDeltaOptS
UeSigInitCqiModSw
witch, witch:Off,
itch:Off
DlEnVarIblerTarget DlEnVarIblerTarget
In LTE TDD:
Switch, Switch:Off, Engineering Design CellAlgoSwitch
CqiAdjAlgoSwitch:O
DlRetxTbsIndexAdj DlRetxTbsIndexAdj
n,
OptSwitch, OptSwitch:Off,
StepVarySwitch:Off,
CfiConvertOptSwitc CfiConvertOptSwitc
DlVarIBLERtargetS
h, h:Off,
witch:Off,
BundlingOptThdSwi BundlingOptThdSwi
TddBundlingCqiAdj
tch, tch:Off,
OptSwitch:Off,
DlSpsMcsIncrease DlSpsMcsIncrease
TddMultiplexingCqi
Switch, Switch:Off,
AdjOptSwitch:Off,
CqiAdjTimeEffSwitc CqiAdjTimeEffSwitc
AdaptiveStepVaryS
h, h:Off,
witch:Off,
RptCqiFltInitSwitch, RptCqiFltInitSwitch:
DlEnVarIblerTarget
UeSigInitCqiModSw Off,
Switch:Off,
itch UeSigInitCqiModSw
DlRetxTbsIndexAdj
itch:Off
OptSwitch:Off,
CfiConvertOptSwitc
h:Off,
BundlingOptThdSwi
tch:Off,

DynAdjVoltSwitch:O Dynamic Adjust

DynAdjVoltSwitch Engineering Design CellAlgoSwitch
ff Voltage Switch:Off
 DlSwitch:Off, DlSwitch:Off,
DlSwitch, UlSwitch, UlSwitch:Off, UlSwitch:Off,
DlLdcSwitch, DlLdcSwitch:Off, DlLdcSwitch:Off,
UlLdcSwitch, UlLdcSwitch:Off, UlLdcSwitch:Off,
PreemptionSwitch, PreemptionSwitch: PreemptionSwitch:
PttAcSwitch, Off, Off, Engineering Design CellAlgoSwitch
VoltePrefAdmission PttAcSwitch:Off, PttAcSwitch:Off,
Switch, VoltePrefAdmission VoltePrefAdmission
VoltePreemptionSwi Switch:Off, Switch:Off,
tch VoltePreemptionSwi VoltePreemptionSwi
tch:Off tch:Off
 imbalance in the
load between cells
(that is, the load
difference between
cells exceeds the
related threshold).
It is recommended
that
UtranMlbSwitch,
UtranIdleMlbSwitch,
MlbLoadInfoSwitch,
GeranMlbSwitch,
InterFreqMlbSwitch: and
Off, CdmaMlbSwitch all
InterFreqMlbSwitch, UtranMlbSwitch:Off, be selected if the
UtranMlbSwitch, GeranMlbSwitch:Off cell load is light in
GeranMlbSwitch, , an early stage of
UtranIdleMlbSwitch, UtranIdleMlbSwitch: network
MlbLoadInfoSwitch, Off, deployment (that is, Engineering Design CellAlgoSwitch
InterFreqBlindMlbS MlbLoadInfoSwitch: the average cell
witch, Off, load is lower than
InterFreqIdleMlbSwi InterFreqBlindMlbS 70%).
tch witch:Off, It is recommended
InterFreqIdleMlbSwi that
tch:Off UtranMlbSwitch,
UtranIdleMlbSwitch,
MlbLoadInfoSwitch,
GeranMlbSwitch,
and
CdmaMlbSwitch all
be selected if the
cell load is heavy
(for example, the
average cell load is
larger than the
InterRatMlbThd
parameter value).
 PdschSpsPcSwitch:
Off,
PhichInnerLoopPcS
witch:Off,
PdcchPcSwitch:On,
PdschSpsPcSwitch:
PdschSpsPcSwitch,
Off, EDlMaxTXPwrSwitc
PhichInnerLoopPcS
PhichInnerLoopPcS h:On for single-
witch,
witch:Off, mode single-carrier
PdcchPcSwitch,
PdcchPcSwitch:On, RRUs, and
EDlMaxTXPwrSwitc
EDlMaxTXPwrSwitc EDlMaxTXPwrSwitc
h,
h:Off, h:On for multi-mode Engineering Design CellAlgoSwitch
BFModeUserPwrS
BFModeUserPwrS RRUs or multi-
witch,
witch:Off, carrier RRUs so
SigPowerIncreaseS
SigPowerIncreaseS that system
witch,
witch:Off, performance is not
BFModeUserAdptP
BFModeUserAdptP affected.
wrSwitch
wrSwitch:Off BFModeUserPwrS
witch:Off,
SigPowerIncreaseS
witch:Off,
BFModeUserAdptP
wrSwitch:Off
 CloseLoopSpsSwitc CloseLoopSpsSwitc
CloseLoopSpsSwitc
h:Off, h:Off,
h,
InnerLoopPuschSwi InnerLoopPuschSwi
InnerLoopPuschSwi
tch:On, tch:On,
tch,
InnerLoopPucchSwi InnerLoopPucchSwi
InnerLoopPucchSwi
tch:On, tch:On,
tch,
CloseLoopOptPUS CloseLoopOptPUS
CloseLoopOptPUS
CHSwitch:Off, CHSwitch:Off,
CHSwitch,
PucchPcDtxSinrSwi PucchPcDtxSinrSwi
PucchPcDtxSinrSwi
tch:Off, tch:Off,
tch,
PuschIoTCtrlSwitch PuschIoTCtrlSwitch
PuschIoTCtrlSwitch
:Off, :Off, Engineering Design CellAlgoSwitch
, SrsPcSwitch,
SrsPcSwitch:On, SrsPcSwitch:On,
NearPointUeOptPU
NearPointUeOptPU NearPointUeOptPU
SCHSwitch,
SCHSwitch:Off, SCHSwitch:Off,
PuschRsrpHighThd
PuschRsrpHighThd PuschRsrpHighThd
Switch,
Switch:Off, Switch:Off,
OuterLoopPucchSw
OuterLoopPucchSw OuterLoopPucchSw
itch,
itch:Off, itch:Off,
PucchInitialPcSwitc
PucchInitialPcSwitc PucchInitialPcSwitc
h,
h:Off, h:Off,
GroupPCForPucch
GroupPCForPucch GroupPCForPucch
Switch
Switch:Off Switch:Off

BfSwitch BfSwitch:Off BfSwitch:Off Engineering Design CellAlgoSwitch

 witch:Off, MBSFNShutDownS
MBSFNShutDownS
NonGbrBundlingSw witch:Off,
witch,
itch:Off, NonGbrBundlingSw
NonGbrBundlingSw
EnAperiodicCqiRpt itch:Off,
itch,
Switch:Off, EnAperiodicCqiRpt
EnAperiodicCqiRpt
DlMbrCtrlSwitch:Off Switch:Off,
Switch,
, DlMbrCtrlSwitch:Off
DlMbrCtrlSwitch,
MbrDlSchSwitch:Off ,
MbrDlSchSwitch,
, MbrDlSchSwitch:Off
UeAmbrDlSchSwitc
UeAmbrDlSchSwitc ,
h,
h:Off, UeAmbrDlSchSwitc
EpfEnhancedSwitc
EpfEnhancedSwitc h:Off,
h,
h:Off, EpfEnhancedSwitc
AperiodicCqiTrigOp
AperiodicCqiTrigOp h:Off,
tSwitch,
tSwitch:Off, AperiodicCqiTrigOp
VoipTbsBasedMcsS
VoipTbsBasedMcsS tSwitch:Off,
elSwitch,
elSwitch:Off, VoipTbsBasedMcsS
PagingInterfRandS
PagingInterfRandS elSwitch:Off,
witch,
witch:Off, PagingInterfRandS
DlSingleUsrMcsOpt Engineering Design CellAlgoSwitch
DlSingleUsrMcsOpt witch:Off,
Switch,
Switch:Off, DlSingleUsrMcsOpt
SubframeSchDiffSw
SubframeSchDiffSw Switch:Off,
itch,
itch:Off, SubframeSchDiffSw
TailPackagePriSch
TailPackagePriSch itch:Off,
Switch,
Switch:Off, TailPackagePriSch
UeSigMcsEnhance
UeSigMcsEnhance Switch:Off,
Switch,
Switch:Off, UeSigMcsEnhance
FreqSelJudgeIgnor
FreqSelJudgeIgnor Switch:Off,
DopplerSwitch,
DopplerSwitch:Off, FreqSelJudgeIgnor
SIB1InterfRandSwit
SIB1InterfRandSwit DopplerSwitch:Off,
ch,
ch:On, SIB1InterfRandSwit
EnhExtQCISpsSch
EnhExtQCISpsSch ch:On,
Switch,
Switch:Off, EnhExtQCISpsSch
DlVoipBundlingSwit
DlVoipBundlingSwit Switch:Off,
ch,
ch:Off, DlVoipBundlingSwit
DlPacketLenAware
DlPacketLenAware ch:Off,
SchSw,
SchSw:Off, DlPacketLenAware
RLCArqFeedbackE
RLCArqFeedbackE SchSw:Off,
 PuschDtxSwitch:On
ImIcSwitch, ,
,
SmartPreAllocation UlIblerAdjustSwitch:
UlIblerAdjustSwitch:
Switch, Off,
Off,
PuschDtxSwitch, UlEnhancedFssSwit
UlEnhancedFssSwit
UlIblerAdjustSwitch, ch:On,
ch:On,
UlEnhancedFssSwit UlEnhancedSrSchS
UlEnhancedSrSchS
ch, witch:Off,
witch:Off,
UlEnhancedSrSchS SchedulerCtrlPower
SchedulerCtrlPower
witch, Switch:Off,
Switch:Off,
SchedulerCtrlPower UlIicsAlgoSwitch:Of
UlIicsAlgoSwitch:Of
Switch, f,
f,
UlIicsAlgoSwitch, UlMinGbrSwitch:Off
UlMinGbrSwitch:Off
UlMinGbrSwitch, ,
,
UlMbrCtrlSwitch, UlMbrCtrlSwitch:Off
UlMbrCtrlSwitch:Off
MbrUlSchSwitch, ,
,
UeAmbrUlSchSwitc MbrUlSchSwitch:Off
MbrUlSchSwitch:Off
h, ,
,
UlEnhancedDopple UeAmbrUlSchSwitc
UeAmbrUlSchSwitc
rSwitch, h:Off, Engineering Design CellAlgoSwitch
h:Off,
UlRaUserSchOptS UlEnhancedDopple
UlEnhancedDopple
w, rSwitch:Off,
rSwitch:Off,
UlLast2RetransSch UlRaUserSchOptS
UlRaUserSchOptS
OptSwitch, w:Off,
w:Off,
UlInterfFssSwitch, UlLast2RetransSch
UlLast2RetransSch
UlSmallRBSpectral OptSwitch:Off,
OptSwitch:Off,
EffOptSw, UlInterfFssSwitch:O
UlInterfFssSwitch:O
PuschUsePucchRb ff,
ff,
Switch, UlSmallRBSpectral
UlSmallRBSpectral
PuschDtxSchOptS EfficiencyOptSw:Off
EffOptSw:Off,
witch, ,
PuschUsePucchRb
ULFSSAlgoSwitch, PuschUsePucchRb
Switch:Off,
PrachRbReuseSwit Switch:Off,
PuschDtxSchOptS
ch, PuschDtxSchOptS
witch:Off,
SrSchDataAdptSw, witch:Off,
ULFSSAlgoSwitch:
UlFssUserThdStSwi ULFSSAlgoSwitch:
On,
tch, On,
PrachRbReuseSwit
HighOrderVMIMOS PrachRbReuseSwit
ch:Off,

Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellAlgoSwitch
ded Value
FreqPriorIFHOSwitc FreqPriorIFHOSwitc FreqPriorIFHOSwitc
h, h:Off, h:Off,
FreqPriorIFBlindHO FreqPriorIFBlindHO FreqPriorIFBlindHO
Switch, Switch:On, Switch:On, Default/Recommen
CellAlgoSwitch
MlbBasedFreqPriH MlbBasedFreqPriH MlbBasedFreqPriH ded Value
oSwitch, oSwitch:Off, oSwitch:Off,
A2BasedFreqPriHo A2BasedFreqPriHo A2BasedFreqPriHo
Switch Switch:Off Switch:Off
 MuBfSwitch:Off, MuBfSwitch:Off,
MuBfSwitch, TM9MuBfSwitch:Off TM9MuBfSwitch:Off
TM9MuBfSwitch, , ,
Default/Recommen
HighOrderMubfSwit HighOrderMubfSwit HighOrderMubfSwit CellAlgoSwitch
ded Value
ch, ch:Off, ch:off,
MubfResAdjSwitch MubfResAdjSwitch: MubfResAdjSwitch:
Off off

Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellAlgoSwitch
ded Value
ACBAR_SWITCH_
DYNAMIC,
ACBAR_SWITCH_ ACBAR_SWITCH_
ACBAR_SWITCH_
STATIC(static STATIC(static Engineering Design CellAlgoSwitch
STATIC,
configuration) configuration)
ACBAR_SWITCH_
DISABLE

FDD: SFN:
JOINT(Joint
scheduling); TDD:
Indoor SFN:
JOINT(Joint
JOINT(Joint scheduling),
ADAPTIVE, JOINT Engineering Design CellAlgoSwitch
scheduling) Outdoor SFN:
ADAPTIVE(Adaptiv
e scheduling), Cell
combination:
JOINT(Joint
scheduling).
 FDD: SFN:
JOINT(Joint
scheduling); TDD:
Indoor SFN:
JOINT(Joint
JOINT(Joint scheduling),
ADAPTIVE, JOINT Engineering Design CellAlgoSwitch
scheduling) Outdoor SFN:
ADAPTIVE(Adaptiv
e scheduling), Cell
combination:
JOINT(Joint
scheduling).

PucchIrcSwitch, PucchIrcSwitch:Off, PucchIrcSwitch:Off,

Engineering Design CellAlgoSwitch
PrachIrcSwitch PrachIrcSwitch:Off PrachIrcSwitch:Off
DynDrxSwitch, DynDrxSwitch:Off, DynDrxSwitch:Off,
Engineering Design CellAlgoSwitch
SmartDrxSwitch SmartDrxSwitch:Off SmartDrxSwitch:Off

DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) Engineering Design CellAlgoSwitch

AvoidGeranInterfSw AvoidGeranInterfSw
itch, itch:Off, AvoidGeranInterfSw
TddAvoidUpPTSInt TddAvoidUpPTSInt itch:Off
erfSwitch, erfSwitch:Off, TddAvoidUpPTSInt
AvoidPrachInterfSw AvoidPrachInterfSw erfSwitch:Off
Engineering Design CellAlgoSwitch
itch, itch:Off, AvoidPrachInterfSw
AvoidUtranInterfSwi AvoidUtranInterfSwi itch:Off
tch, tch:Off, AvoidUtranInterfSwi
IntraBandInterfMoni IntraBandInterfMoni tch:Off
torSwitch torSwitch:Off
OFF, ON OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch
OFF, STATIC,
OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch
DYNAMIC

OFF, ON OFF(Off) OFF(off) Engineering Design CellAlgoSwitch

 IntraDlCompSwitch:
IntraDlCompSwitch,
Off,
InterDlCompDcsSwi
InterDlCompDcsSwi
tch, DlCompSwitch:Off Engineering Design CellAlgoSwitch
tch:Off,
InterDlCompCbfSwi
InterDlCompCbfSwi
tch
tch:Off
MumimoPuschPsic MumimoPuschPsic MuMimoPuschPsic
Engineering Design CellAlgoSwitch
Switch Switch:Off Switch:Off
 InterFreqMlbBlindH
InterFreqMlbBlindH o:Off,
o, InterRatMlbBlindHo: InterFreqMlbBlindH
InterRatMlbBlindHo, Off, o:Off,
Engineering Design CellAlgoSwitch
InterFreqMlbRedire InterFreqMlbRedire InterRatMlbBlindHo:
ct, ct:Off, Off
InterRatMlbRedirect InterRatMlbRedirect
:Off
 UlJointReceptionSw UlJointReceptionSw
UlJointReceptionSw
itch:Off, itch:Off,
itch,
UlJointReceptionPh UlJointReceptionPh
UlJointReceptionPh
aseIISwitch:Off, aseIISwitch:Off,
aseIISwitch,
UlCompRollbackSw UlCompRollbackSw
UlCompRollbackSw
itch:On, itch:On,
itch,
UlJointReception3C UlJointReception3C
UlJointReception3C
ellSwitch:Off, ellSwitch:Off,
ellSwitch,
UlHetnetJointRecep UlHetnetJointRecep Engineering Design CellAlgoSwitch
UlHetnetJointRecep
tionSwitch:Off, tionSwitch:Off,
tionSwitch,
UlHetnetCompMan UlHetnetCompMan
UlHetnetCompMan
ualNcellCfgSw:Off, ualNcellCfgSw:Off,
ualNcellCfgSw,
UlHetnetCompOnUl UlHetnetCompOnUl
UlHetnetCompOnUl
RsrpSw:Off, RsrpSw:Off,
RsrpSw,
SimplePairedComp SimplePairedComp
SimplePairedComp
Sw:Off, Sw:Off,
Sw, VoipPrioSw
VoipPrioSw:Off VoipPrioSw:Off
 It is recommended
that this switch be
CrossPolaCalibratio CrossPolaCalibratio
on for two groups of N/A CellAlgoSwitch
nSwitch nSwitch:Off
4T cross-polarized
antennas.

GLDynSpectrumSh GLDynSpectrumSh
None Engineering Design CellAlgoSwitch
areSwitch areSwitch:Off
OFF, ON OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch
 MrcIrcAdptSwitch:O MrcIrcAdptSwitch:O
MrcIrcAdptSwitch,
n, n,
SmartIrcSwitch,
SmartIrcSwitch:Off, SmartIrcSwitch:Off, Engineering Design CellAlgoSwitch
MrcIrcAdaptivefor2
MrcIrcAdaptivefor2 MrcIrcAdaptivefor2
R
R:Off R:Off
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellAlgoSwitch
ded Value
INTRA_RAT_ANR_ INTRA_RAT_ANR_
SW, SW:Off, Radio Planning
None CellAlgoSwitch
INTER_RAT_ANR_ INTER_RAT_ANR_ (Internal planning)
SW SW:Off
SfnPdcchDcsSwitch SfnPdcchDcsSwitch SFNPDCCHDCSS
, :Off, WITCH:Off,
SfnUll2SelectiveRc SfnUll2SelectiveRc SfnUll2SelectiveRc
vSwitch, vSwitch:Off, vSwitch:Off,
SfnPdcchSdmaSwit SfnPdcchSdmaSwit SFNPDCCHSDMA
ch, ch:Off, SWITCH:Off,
SfnPucchAckSdma SfnPucchAckSdma SFNPUCCHACKS
Switch, Switch:Off, DMASWITCH:Off,
SuperCombCellSwit SuperCombCellSwit SuperCombCellSwit
Default/Recommen
ch, ch:Off, ch:Off, CellAlgoSwitch
ded Value
SfnDl2LoadLevelAd SfnDl2LoadLevelAd SfnDl2LoadLevelAd
ptSwitch, ptSwitch:Off, ptSwitch:Off,
SfnDlSchAttriAdjsS SfnDlSchAttriAdjsS SfnDlSchAttriAdjsS
witch, witch:Off, witch:Off,
SfnCbfSwitch, SfnCbfSwitch:Off, SfnCbfSwitch:Off,
SfnVoLteDlJSchSwi SfnVoLteDlJSchSwi SfnVoLteDlJSchSwi
tch, tch:Off, tch:Off,
SfnTarRruSelEnhS SfnTarRruSelEnhS SfnTarRruSelEnhS
witch witch:Off witch:Off
OFF, ON OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch

TM9Switch(TM9Swi Default/Recommen
TM9Switch TM9Switch:Off CellAlgoSwitch
tch):Off ded Value
OFF, ECO_BASED, Default/Recommen
OFF(OFF) OFF(OFF) CellAlgoSwitch
ENB_BASED ded Value

AntRsPwrSwitch:Of AntRsPwrSwitch:Of
AntRsPwrSwitch Engineering Design CellAlgoSwitch
f f
FixedMeasObjIDSw FixedMeasObjIDSw
FixedMeasObjIDSw
itch, itch:Off,
itch:Off,
VoipMeasFreqPriS VoipMeasFreqPriS Radio Planning
VoipMeasFreqPriS CellAlgoSwitch
witch, witch:Off, (Internal planning)
witch:Off,PsMeasFr
PsMeasFreqPriSwit PsMeasFreqPriSwit
eqPriSwitch:On
ch ch:Off
TddAckFbModeCfg TddAckFbModeCfg TddAckFbModeCfg Default/Recommen
CellAlgoSwitch
OptSwitch OptSwitch:Off OptSwitch:Off ded Value
HANDOVERIMME
DIATELY,
HANDOVERIMME
BASEDONSIGNAL Default/Recommen
DIATELY(HANDOV None CellAlgoSwitch
STRENGTH, ded Value
ERIMMEDIATELY)
BASEDONFREQP
RIORITY

Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellAlgoSwitch
ded Value
 AbnUeSchSwitch:O AbnUeSchSwitch:O Default/Recommen
AbnUeSchSwitch CellAlgoSwitch
ff ff ded Value

Ssrd8T8RAlgoSwitc Ssrd8T8RAlgoSwitc Ssrd8T8RAlgoSwitc Default/Recommen

CellAlgoSwitch
h h:Off h:Off ded Value
 ch:Turning on this
switch is
recommended
because intra-BBP
UL CoMP can
increase the
average uplink
throughput and
improve the uplink
coverage of an SFN
cell.
InterBaseBandSwit
ch:Turning on this
switch is
recommended
IntraBaseBandSwit IntraBaseBandSwit because intra-BBP
ch, ch:Off, UL CoMP can
InterBaseBandSwit InterBaseBandSwit increase the
ch, ch:Off, average uplink Default/Recommen
CellAlgoSwitch
ComCoverUlComp ComCoverUlComp throughput and ded Value
Switch, Switch:Off, improve the uplink
SfnUplinkComp3Ce SfnUplinkComp3Ce coverage of an SFN
llSwitch llSwitch:Off cell.
ComCoverUlComp
Switch:Turning off
this switch is
recommended if
multiple RF
modules provide
different coverages
in an SFN cell.
SfnUplinkComp3Ce
llSwitch:Turning on
this switch is
recommended
when an SFN cell is
composed of three
or more physical

OFF, ON OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch

OutOfBandRelayS OutOfBandRelayS OutOfBandRelayS Radio Planning
CellAlgoSwitch
witch witch:Off witch:Off (Internal planning)

OFF, ON OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch

 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellAlgoSwitch
ded Value

CqiReliableSwitch: CqiReliableSwitch: Default/Recommen

CqiReliableSwitch CellAlgoSwitch
Off Off ded Value
OFF, ON OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch
DYNAMIC_FOR_M DYNAMIC_FOR_M DYNAMIC_FOR_M
O, O:On, O:On,
Engineering Design CellAlgoSwitch
DYNAMIC_FOR_S DYNAMIC_FOR_S DYNAMIC_FOR_S
SAC SAC:Off SAC:Off
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellAlgoSwitch
ded Value
InterFreqBackoffSw InterFreqBackoffSw InterFreqBackoffSw Default/Recommen
CellAlgoSwitch
itch itch:Off itch:Off ded Value
 Radio Planning
SrvBasedInterFreq SrvBasedInterFreq SrvBasedInterFreq
(Negotiation with CellAlgoSwitch
HoSw HoSw:On HoSw:On
the peer)
 INTRA_RAT_NCEL
INTRA_RAT_NCEL L_CLASS_SW:Off,
L_CLASS_SW, NCELL_CLASS_H
NCELL_CLASS_H O_POLICY_SW:Off
None Engineering Design CellAlgoSwitch
O_POLICY_SW, ,
NCELL_CLASS_P NCELL_CLASS_P
CI_CONFLICT_SW CI_CONFLICT_SW
:Off
IntraAnrPolicySwitc IntraAnrPolicySwitc IntraAnrPolicySwitc
h, h:Off, h:Off,
Engineering Design CellAlgoSwitch
PciConflictDetectPo PciConflictDetectPo PciConflictDetectPo
licySwitch licySwitch:Off licySwitch:Off
 The parameter
value ON(On) is
recommended in
scenarios with the
presence of PIM Default/Recommen
OFF, ON OFF(Off) CellAlgoSwitch
interference. ded Value
The parameter
value OFF(Off) is
recommended in
other scenarios.

OFF, ON OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch

OFF, ABS OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch
 UlCamcSw:Off, UlCamcSw:Off
UlCamcSw, Default/Recommen
UlInterEnbCamcSw UlInterEnbCamcSw CellAlgoSwitch
UlInterEnbCamcSw ded Value
:Off :Off

Default/Recommen
OFF, ON OFF(Off) OFF CellAlgoSwitch
ded Value
 It is recommended
that the
InterfHighSpeedSW
option be selected
when the eNodeB
is connected to the
eCoordinator and
interference
coordination for
high-speed railway
scenarios is
required. It is
recommended that
this option be
InterfHighSpeedSW InterfHighSpeedSW deselected in other
, :Off, scenarios. Radio Planning
HighSpeedUserRed HighSpeedUserRed It is recommended (Negotiation with CellAlgoSwitch
irectSwitch, irectSwitch:Off, that the the peer)
DlAfcSwitch DlAfcSwitch:Off HighSpeedUserRed
irectSwitch option
be selected in
common cells near
the high-speed
railway and be
deselected in other
scenarios. It is
recommended that
the DlAfcSwitch
option be selected
only in high-speed
railway cell
combination
scenarios.
VideoRateAdaptSwi VideoRateAdaptSwi VideoRateAdaptSwi
tch, tch:Off, tch:Off, Radio Planning
CellAlgoSwitch
DownLoadRateLimi DownLoadRateLimi DownLoadRateLimi (Internal planning)
tSwitch tSwitch:Off tSwitch:Off

OFF, ON OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch

 Default/Recommen
OFF, ON ON(On) ON(On) CellAlgoSwitch
ded Value
OFF, ON OFF(Off) OFF(Off) Engineering Design CellAlgoSwitch
 Ul1R1RJRSwitch:O
ff,
Ul1R1RJRSwitch:O
Ul1R2RJRSwitch:O
Ul1R1RJRSwitch, ff,
ff,
Ul1R2RJRSwitch, Ul1R2RJRSwitch:O
Ul2R8RJRSwitch:O Default/Recommen
Ul2R8RJRSwitch, ff,Ul2R8RJRSwitch: CellAlgoSwitch
ff, ded Value
Ul4R8RJRSwitch, Off,Ul4R8RJRSwitc
Ul4R8RJRSwitch:O
Ul8R8RJRSwitch h:Off,Ul8R8RJRSwi
ff,
tch:Off
Ul8R8RJRSwitch:O
ff

VamPhaseShiftAlgo VamPhaseShiftAlgo VamPhaseShiftAlgo

Engineering Design CellAlgoSwitch
Switch Switch:Off Switch:Off
BACKWARD_ANR_ BACKWARD_ANR_
None Engineering Design CellAlgoSwitch
SW SW:On
 Dl256QamSwitch:O Dl256QamSwitch:O Default/Recommen
Dl256QamSwitch CellAlgoSwitch
ff ff ded Value

OverlapIndAutoSwit OverlapIndAutoSwit OverlapIndAutoSwit Default/Recommen

CellAlgoSwitch
ch ch:Off ch:On ded Value
BlindScellAutoSwitc BlindScellAutoSwitc BlindScellAutoSwitc Default/Recommen
CellAlgoSwitch
h h:Off h:On ded Value

Radio Planning
OFF, ON OFF(Off) OFF(Off) CellAlgoSwitch
(Internal planning)
DlCellCoverEnhanc DlCellCoverEnhanc DlCellCoverEnhanc
Engineering Design CellAlgoSwitch
eAlgoSw eAlgoSw:off eAlgoSw:off
 UlPacketLenAware UlPacketLenAware
UlPacketLenAware SchSw:Off, SchSw:Off,
SchSw, EnhExtQCITtiBundli EnhExtQCITtiBundli
EnhExtQCITtiBundli ngSwitch:Off, ngSwitch:Off,
ngSwitch, EnhExtQCISpsSch EnhExtQCISpsSch
EnhExtQCISpsSch Switch:Off, Switch:Off,
Engineering Design CellAlgoSwitch
Switch, UlVoipRbRsvSwitch UlVoipRbRsvSwitch
UlVoipRbRsvSwitch :Off, :Off,
, UlThpEnhSwitch, UlThpEnhSwitch:Of UlThpEnhSwitch:Of
UlDataFitterRbCalc f, f,
Switch UlDataFitterRbCalc UlDataFitterRbCalc
Switch:Off Switch:Off.
BasicUdcSwitch BasicUdcSwitch:Off BasicUdcSwitch:Off Engineering Design CellAlgoSwitch
AcBarForVoLTEPre AcBarForVoLTEPre AcBarForVoLTEPre Default/Recommen
CellAlgoSwitch
ferSwitch ferSwitch:Off ferSwitch:Off ded Value
VoipFailDecSelfRec VoipFailDecSelfRec
None Engineering Design CellAlgoSwitch
Switch Switch:Off
UNDELIVER,
UNDELIVER( UND UNDELIVER(UNDE Default/Recommen
FREQUENCY, CellAlgoSwitch
ELIVER) LIVER) ded Value
EUTRA

Default/Recommen
OFF, ON OFF(Off) None CellAlgoSwitch
ded Value
COLLISION_REPO COLLISION_REPO
RT_SWITCH, RT_SWITCH:On, Radio Planning
None CellAlgoSwitch
CONFUSION_REP CONFUSION_REP (Internal planning)
ORT_SWITCH ORT_SWITCH:On
 IntraFreqMroAlgoS
IntraFreqMroSwitch witch:Off,
IntraFreqMroSwitch :Off, InterFreqMroAlgoS
, InterFreqMroSwitch witch:Off,
InterFreqMroSwitch :Off, UtranMroSwitch:Off
, UtranMroSwitch, UtranMroSwitch:Off ,
GeranMroSwitch, , GeranMroSwitch:Of
UEMroSwitch, GeranMroSwitch:Of f,
IntraFreqReselOptS f, UEMroSwitch:Off, UeMroAlgoSwitch:
witch, IntraFreqReselOptS Off,
Engineering Design CellAlgoSwitch
UtranUnnecHoOptS witch:Off, IntraFreqReselOptS
witch, UtranUnnecHoOptS witch:Off,
GeranUnnecHoOpt witch:Off, UtranUnnecHoOptS
Switch, GeranUnnecHoOpt witch:Off,
IntraRatCallbackSw Switch:Off, GeranUnnecHoOpt
itch, IntraRatCallbackSw Switch:Off,
UnnecHoOptWithou itch:Off, IntraRatCallbackSw
tRIM UnnecHoOptWithou tich:Off,
tRIM:Off UnnecHoOptWithou
tRIM:Off
NoUserCellRecover NoUserCellRecover NoUserCellRecover Radio Planning
CellAlgoSwitch
ySwitch ySwitch:Off ySwitch:Off (Internal planning)

UlHeavyTrafficMlbS UlHeavyTrafficMlbS UlHeavyTrafficMlbS Radio Planning

CellAlgoSwitch
witch witch:Off witch:Off (Internal planning)
 GSM_MEAS_DEL_ GSM_MEAS_DEL_ Radio Planning
GSM_MEAS_DEL_
INTERFREQ_SW: INTERFREQ_SW: (Negotiation with CellAlgoSwitch
INTERFREQ_SW
Off Off the peer)

Radio Planning
0~255 None None CellDlIcic
(Internal planning)
 If this parameter is
not set to
INVALID(Invalid DL
band division
scheme), it is
recommended that
this parameter be
set to a different
value from those of
neighboring cells. If
it is impossible for
INVALID(Invalid DL
MODE1, MODE2, neighboring cells to
band division Engineering Design CellDlIcic
MODE3, INVALID use mutually
scheme)
different band
modes, it is
recommended that
this parameter be
set to the same
value as that of a
neighboring cell
that has the
weakest
interference with
the current cell.
 Radio Planning
-5~15 1 1 CellDlIcic
(Internal planning)
 Radio Planning
-140~-43 38 38 CellDlIcic
(Internal planning)

Radio Planning
0~255 None None CellDlpcPdcch
(Internal planning)
 setting of PaPcOff.
When PaPcOff is
set to -6, you are
advised to set
DediDciPwrOffset
to -60.
When PaPcOff is
set to -4.77, you are
advised to set
DediDciPwrOffset
to -48.
When PaPcOff is
set to -3, you are
advised to set
DediDciPwrOffset
to -30.
When PaPcOff is
set to -1.77, you are
Default/Recommen
-15~15 -30 advised to set CellDlpcPdcch
ded Value
DediDciPwrOffset
to -18.
When PaPcOff is
set to 0, you are
advised to set
DediDciPwrOffset
to 0.
When PaPcOff is
set to 1, you are
advised to set
DediDciPwrOffset
to 10.
When PaPcOff is
set to 2, you are
advised to set
DediDciPwrOffset
to 20.
When PaPcOff is

Radio Planning
0~255 None None CellDlpcPdsch
(Internal planning)
 When PaPcOff is
set to -6, you are
not advised to
enable the ICIC
function.
When PaPcOff is
set to -4.77, you are
advised to set
CcuPa to -6 dB.
When PaPcOff is
set to -3, you are
advised to set
CcuPa to -6 dB.
When PaPcOff is
PA_NEG6,
set to -1.77, you are
PA_NEG4DOT77,
advised to set
PA_NEG3, Default/Recommen
PA_NEG6(-6dB) CcuPa to -4.77 dB. CellDlpcPdsch
PA_NEG1DOT77, ded Value
When PaPcOff is
PA_0, PA_1, PA_2,
set to 0, you are
PA_3
advised to set
CcuPa to -3 dB.
When PaPcOff is
set to 1, you are
advised to set
CcuPa to -1.77 dB.
When PaPcOff is
set to 2, you are
advised to set
CcuPa to 0 dB.
When PaPcOff is
set to 3, you are not
advised to enable
the ICIC function.
 When PaPcOff is
set to -6, you are
not advised to
enable the ICIC
function.
When PaPcOff is
set to -4.77, you are
advised to set
CeuPa to -3 dB.
When PaPcOff is
set to -3, you are
advised to set
CeuPa to -1.77 dB.
When PaPcOff is
PA_NEG6,
set to -1.77, you are
PA_NEG4DOT77,
advised to set
PA_NEG3, PA_NEG1DOT77(- Default/Recommen
CeuPa to 0 dB. CellDlpcPdsch
PA_NEG1DOT77, 1.77dB) ded Value
When PaPcOff is
PA_0, PA_1, PA_2,
set to 0, you are
PA_3
advised to set
CeuPa to 1 dB.
When PaPcOff is
set to 1, you are
advised to set
CeuPa to 2 dB.
When PaPcOff is
set to 2, you are
advised to set
CeuPa to 3 dB.
When PaPcOff is
set to 3, you are not
advised to enable
the ICIC function.

Default/Recommen
900~3600 1800 1800 CellDlpcPdsch
ded Value
 Default/Recommen
1~100 30 30 CellDlpcPdsch
ded Value
 Default/Recommen
1~100 70 70 CellDlpcPdsch
ded Value
 Default/Recommen
5~1800 1800 1800 CellDlpcPdsch
ded Value
 Default/Recommen
-15~15 -13 -13 CellDlpcPdsch
ded Value

Default/Recommen
-15~15 -13 -13 CellDlpcPdsch
ded Value
 Radio Planning
0~255 None None CellDlpcPhich
(Internal planning)
The setting of this
parameter is
recommended to be
the same as the
setting of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
PwrOffset to -30.
When PaPcOff is
set to -4.77, you are
advised to set
PwrOffset to -18.
When PaPcOff is
set to -3, you are
advised to set
PwrOffset to 0.
When PaPcOff is Default/Recommen
-15~15 0 CellDlpcPhich
set to -1.77, you are ded Value
advised to set
PwrOffset to 12.
When PaPcOff is
set to 0, you are
advised to set
PwrOffset to 30.
When PaPcOff is
set to 1, you are
advised to set
PwrOffset to 40.
When PaPcOff is
set to 2, you are
advised to set
PwrOffset to 50.
When PaPcOff is
set to 3, you are
advised to set
PwrOffset to 60.

Radio Planning
0~255 None None CellDlschAlgo
(Internal planning)
DLSCH_PRI_TYPE
_EPF,
DLSCH_PRI_TYPE
_PF, DLSCH_PRI_TYPE DLSCH_PRI_TYPE Default/Recommen
CellDlschAlgo
DLSCH_PRI_TYPE _EPF(EPF) _EPF(EPF) ded Value
_MAX_CI,
DLSCH_PRI_TYPE
_RR
 Default/Recommen
0~100 0 0 CellDlschAlgo
ded Value

If MIMO is not used

for a cell, the value
SW_MAX_SM_RA
NK_1 is
recommended. If
2x2 MIMO is used
for a 2T2R or 2T4R
SW_MAX_SM_RA
cell or 4x2 MIMO is
NK_1,
used for a 4T4R
SW_MAX_SM_RA SW_MAX_SM_RA Default/Recommen
cell, the value CellDlschAlgo
NK_2, NK_2(Rank2) ded Value
SW_MAX_SM_RA
SW_MAX_SM_RA
NK_2 is
NK_4
recommended. If
4x4 MIMO is used
for a 4T4R cell, the
value
SW_MAX_SM_RA
NK_4 is
recommended.
BASIC_SCHEDUL
BASIC_SCHEDUL BASIC_SCHEDUL Default/Recommen
E, CellDlschAlgo
E(Basic Schedule) E(Basic Schedule) ded Value
DIFF_SCHEDULE

Default/Recommen
0~50 0 0 CellDlschAlgo
ded Value
EPF_CAPC_FACT
OR_1,
EPF_CAPC_FACT
OR_0DOT01,
EPF_CAPC_FACT
OR_0DOT5, EPF_CAPC_FACT EPF_CAPC_FACT Default/Recommen
CellDlschAlgo
EPF_CAPC_FACT OR_1(1) OR_1(1) ded Value
OR_2,
EPF_CAPC_FACT
OR_3,
EPF_CAPC_FACT
OR_4
 Default/Recommen
0~100 10 10 CellDlschAlgo
ded Value
ALL_EDGE_USER,
ALL_EDGE_USER( ALL_EDGE_USER( Default/Recommen
PART_EDGE_USE CellDlschAlgo
All Edge User) All Edge User) ded Value
R

EDGE_USER_NO_
EDGE_USER_NO_ EDGE_USER_NO_
PRIO, Default/Recommen
PRIO(Edge User PRIO(Edge User CellDlschAlgo
EDGE_USER_PRI ded Value
No Prio) No Prio)
O
ROUND_DOWN,
ROUND_DOWN(R ROUND_DOWN(R Default/Recommen
ROUND_UP, CellDlschAlgo
ound Down) ound Down) ded Value
ADAPTIVE

1~6 5 5 N/A CellDlschAlgo

Default/Recommen
0~1, step:0.1 8 8 CellDlschAlgo
ded Value
 Default/Recommen
0~100 60 60 CellDlschAlgo
ded Value
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellDlschAlgo
ded Value
FROMSCC, FROMSCC(FROM FROMSCC(FROM Default/Recommen
CellDlschAlgo
FROMPCC SCC) SCC) ded Value
ms20, ms40, Default/Recommen
ms20(20ms) ms20(20ms) CellDlschAlgo
ADAPTIVE ded Value
SINGLEUSER_ST
RATEGY,
MULTIUSER_STRA SINGLEUSER_ST SINGLEUSER_ST
Default/Recommen
TEGY, RATEGY(Single RATEGY(Single CellDlschAlgo
ded Value
MULTIUSR_LOWM User Strategy) User Strategy)
CSLIMIT_STRATE
GY
 DETECTRANK1AD
JSWITCH:Off,
DetectRank2AdjSwi DetectRank2AdjSwi DETECTRANK2AD
tch, tch:Off, JSWITCH:Off is
DetectRank1AdjSwi DetectRank1AdjSwi recommended for Default/Recommen
CellDlschAlgo
tch, tch:Off, LTE FDD cells, On ded Value
BfDetectRank1AdjS BfDetectRank1AdjS is recommended for
witch witch:Off LTE TDD cells,
BfDetectRank1AdjS
witch:Off.
 SubFrame0(SubFra
me0):Off,
SubFrame1(SubFra
me1):Off,
SubFrame2(SubFra
SubFrame0, SubFrame0:Off, me2):Off,
SubFrame1, SubFrame1:Off, SubFrame3(SubFra
SubFrame2, SubFrame2:Off, me3):Off,
SubFrame3, SubFrame3:Off, SubFrame4(SubFra
SubFrame4, SubFrame4:Off, me4):Off,
N/A CellDlschAlgo
SubFrame5, SubFrame5:Off, SubFrame5(SubFra
SubFrame6, SubFrame6:Off, me5):Off,
SubFrame7, SubFrame7:Off, SubFrame6(SubFra
SubFrame8, SubFrame8:Off, me6):Off,
SubFrame9 SubFrame9:Off SubFrame7(SubFra
me7):Off,
SubFrame8(SubFra
me8):Off,
SubFrame9(SubFra
me9):Off

Default/Recommen
SCH, NSCH SCH(Schedule) SCH(Schedule) CellDlschAlgo
ded Value
 Default/Recommen
0~1000000 0 0 CellDlschAlgo
ded Value
 Default/Recommen
0~10000 10000 10000 CellDlschAlgo
ded Value
 For a network with
three sectors:
It is recommended
that this parameter
be set to MOD6
when the average
PRB usage in an
area is lower than
or equal to 30%.
It is recommended
that this parameter
be set to MOD3
when the average
PRB usage in an
area is greater than
MOD3, MOD4, 30%. Default/Recommen
MOD6(6) CellDlschAlgo
MOD6 For a network with ded Value
four sectors:
It is recommended
that this parameter
be set to MOD6
when the average
PRB usage in an
area is lower than
or equal to 30%.
It is recommended
that this parameter
be set to MOD4
when the average
PRB usage in an
area is greater than
30%.
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellDlschAlgo
ded Value
 Default/Recommen
6~120 15 15 CellDlschAlgo
ded Value
 1. 400 for 1.4 MHz
cells;
2. 117 for cells in a
0.010~0.930, Radio Planning
117 bandwidth of 3 CellDlschAlgo
step:0.001 (Internal planning)
MHz, 5 MHz, 10
MHz, 15 MHz, or 20
MHz.

Default/Recommen
0~10, step:0.01 10 10 CellDlschAlgo
ded Value
UnCfgCsiRsUESch UnCfgCsiRsUESch UnCfgCsiRsUESch
Engineering Design CellDlschAlgo
Switch Switch:Off Switch:On
 Radio Planning
2~1800 30 30 CellDlschAlgo
(Internal planning)
 Default/Recommen
1~10 10 10 CellDlschAlgo
ded Value
DlVoIPLoadBasedS DlVoIPLoadBasedS DlVoIPLoadBasedS Radio Planning
CellDlschAlgo
chSwitch chSwitch:Off chSwitch:off (Internal planning)
5ms, 10ms, 20ms,
Radio Planning
40ms, 80ms, 5ms 5ms(5ms) CellDlschAlgo
(Internal planning)
160ms, inf

Default/Recommen
0~100 45 45 CellDlschAlgo
ded Value

Default/Recommen
0~100 30 30 CellDlschAlgo
ded Value
 Default/Recommen
-25~25 0 0 CellDlschAlgo
ded Value

Default/Recommen
OFF, ON OFF(Off) OFF(OFF) CellDlschAlgo
ded Value

Default/Recommen
-1200~400 -850 -850 CellDlschAlgo
ded Value

Default/Recommen
-1200~400 -900 -900 CellDlschAlgo
ded Value

Default/Recommen
0~32 None none CellDlschAlgo
ded Value
 Default/Recommen
OFF, ON None none CellDlschAlgo
ded Value

Default/Recommen
-1200~400 None none CellDlschAlgo
ded Value

CQI_PERIOD_BAS
CQI_PERIOD_BAS
ED, CQI_PERIOD_BAS Radio Planning
ED(CQI_PERIOD_ CellDlschAlgo
CQI_REPORTINTE ED (Internal planning)
BASED)
RVAL_BASED
EQUALLY_DIVIDE
EQUALLY_DIVIDE EQUALLY_DIVIDE
D, Radio Planning
D(EQUALLY_DIVID D(EQUALLY_DIVID CellDlschAlgo
ADAPTIVELY_DIVI (Internal planning)
ED) ED)
DED
DlCaUserRbPriMcs DlCaUserRbPriMcs DlCaUserRbPriMcs Radio Planning
CellDlschAlgo
SelSwitch SelSwitch:off SelSwitch:Off (Internal planning)

Default/Recommen
1~1000 10 10 CellDlschAlgo
ded Value
FIX_CONFIG, ADAPTIVE_CONFI ADAPTIVE_CONFI
Default/Recommen
ADAPTIVE_CONFI G(ADAPTIVE_CON G(ADAPTIVE_CON CellDlschAlgo
ded Value
G FIG) FIG)

Default/Recommen
0~9 9 9 CellDlschAlgo
ded Value
 Default/Recommen
OFF, ON None None CellDlschAlgo
ded Value

20 (It is
recommended that
this parameter be
set to 20 if the
0.01~0.99, SpsSchSwitch Default/Recommen
40 CellDlschAlgo
step:0.01 option of the ded Value
DlSchSwitch
parameter in the
CellAlgoSwitch MO
is selected.)
 Radio Planning
0~1000 700 700 CellDlschAlgo
(Internal planning)
 Set this parameter
based on the
maximum train
speed. The
mapping between
the parameter value
and the train speed
Radio Planning
0~1024 256 is as follows: 32 CellDlschAlgo
(Internal planning)
(150 km/h), 64 (200
km/h), 128 (250
km/h), 256 (300
km/h), 384 (350
km/h), 512 (400
km/h), 640 (450
km/h).
CELL_INST_UNIN
STALL,
SWITCH_OFF,
NOT_ALLOWED_P
None None N/A CellDlschAlgo
OWER,
NOT_ALLOWED_B
OARD,
UNKNOWN, NULL

Radio Planning
0~255 None None CellMLB
(Internal planning)
1~100 60 60 Engineering Design CellMLB
1~100 75 75 Engineering Design CellMLB
 Default/Recommen
0~50 8 8 CellMLB
ded Value
 Default/Recommen
1~50 15 15 CellMLB
ded Value
 Default/Recommen
1~100 15 15 CellMLB
ded Value

1~30 10 10 Engineering Design CellMLB

 Default/Recommen
0~100 0 0 CellMLB
ded Value

PRB_ONLY,
UE_NUMBER_ONL
PRB_ONLY(PrbMo PRB_ONLY(PrbMo
Y, Engineering Design CellMLB
de) de)
PRB_OR_UE_NUM
BER
1~10000 100 100 Engineering Design CellMLB
 Default/Recommen
0~10000 20 20 CellMLB
ded Value
 Default/Recommen
1~20 5 5 CellMLB
ded Value
 Default/Recommen
0~50 2 2 CellMLB
ded Value

It is recommended
that
DlDataMlbMode be
set to
NON_TRIGGERED
when the cell load
is light and UEs are
evenly distributed in
NON_TRIGGERED different cells in an
NON_TRIGGERED Default/Recommen
(NON_TRIGGERE early stage of CellMLB
, UENUMBASED ded Value
D) network
deployment. If the
cell load is close to
the full load and
UEs are not
evenly distributed
between cells, set
this parameter to
UeNumBased.
NON_SHARING,
NON_SHARING(N NON_SHARING(N
SHARING, Engineering Design CellMLB
ON_SHARING) ON_SHARING)
OVERSHARING
 Default/Recommen
0~100 15 15 CellMLB
ded Value

Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellMLB
ded Value
Proportion Proportion:Off Proportion: Off Engineering Design CellMLB
 For a network with
MLB deployed not
for the first time,
this parameter is
set to 0 by default
after a version
upgrade if this
parameter is
unavailable in the
source version, and
you are advised to
set this parameter
to 10 after the
upgrade. The
upgrade does not
affect the MLB
effects in the live
network. If this
Radio Planning
0~10000 0 parameter is CellMLB
(Internal planning)
available in the
source version, you
are advised to
inherit the
parameter value
after the upgrade.
For a network with
MLB deployed for
the first time, you
are advised to set
this parameter to 10
so that the number
of unnecessary
handovers for load
balancing can be
reduced to achieve
better balancing
performance.
 For a network with
MLB deployed not
for the first time,
this parameter is
set to 0 by default
after a version
upgrade if this
parameter is
unavailable in the
source version, and
you are advised to
set this parameter
to 5 after the
upgrade. The
upgrade does not
affect the MLB
effects in the live
network. If this
Radio Planning
0~10000 0 parameter is CellMLB
(Internal planning)
available in the
source version, you
are advised to
inherit the
parameter value
after the upgrade.
For a network with
MLB deployed for
the first time, you
are advised to set
this parameter to 5
so that the number
of unnecessary
handovers for load
balancing can be
reduced to achieve
better balancing
performance.
 SynchronizedUE:O SynchronizedUE:O
SynchronizedUE,
n, IdleUE:Off, n, IdleUE:Off,
IdleUE,
PrbMlbSynchronize PrbMlbSynchronize Engineering Design CellMLB
PrbMlbSynchronize
dUE:On, dUE:On,
dUE, PrbMlbIdleUE
PrbMlbIdleUE:Off PrbMlbIdleUE:Off
 Default/Recommen
1~10000 100 100 CellMLB
ded Value
1~10000 150 150 Engineering Design CellMLB
 Default/Recommen
5~30 30 30 CellMLB
ded Value
 Default/Recommen
5~30 30 30 CellMLB
ded Value
FAIRSTRATEGY, FAIRSTRATEGY(F FAIRSTRATEGY(F
Engineering Design CellMLB
PRIORITYBASED airStrategy) airStrategy)
 ADAPTIVE(Adaptiv ADAPTIVE(Adaptiv
ADAPTIVE, ALL Engineering Design CellMLB
e) e)
0~10000 0 20 Engineering Design CellMLB
LOADINFOFREQ, LOADINFOFREQ(L LOADINFOFREQ(L Default/Recommen
CellMLB
ALLFREQ OADINFOFREQ) OADINFOFREQ) ded Value
PRBRATIOHIGHM
PRBRATIOHIGHM PRBRATIOHIGHM
ODE, Default/Recommen
ODE(PRBRATIOHI ODE(PRBRATIOHI CellMLB
PRBRATIOLOWMO ded Value
GHMODE) GHMODE)
DE
 Default/Recommen
0~50 2 2 CellMLB
ded Value
PRB_USAGE,
PRB_VALUATION_
PRB_USAGE(PRB PRB_USAGE(Prb Default/Recommen
WITH_CTRL, CellMLB
_USAGE) Usage) ded Value
PRB_VALUATION_
NO_CTRL
 Default/Recommen
0~3600 120 120 CellMLB
ded Value
ONLY_STRONGES PERMIT_NON_ST
ONLY_TRY_STRO
T_CELL, RONGEST_CELL( Default/Recommen
NGEST_CELL(Only CellMLB
PERMIT_NON_ST Permit Trying Non- ded Value
Try Strongest Cell)
RONGEST_CELL Strongest Cell)
IRAT_PRB_ONLY,
IRAT_UE_NUMBE
IRAT_PRB_ONLY( IRAT_PRB_ONLY(
R_ONLY, Engineering Design CellMLB
PRB Usage) PRB Usage)
IRAT_PRB_OR_UE
_NUMBER
 Default/Recommen
1~10000 150 150 CellMLB
ded Value

1~127 1 1 Engineering Design CellMLB

0~127 4 4 Engineering Design CellMLB

0~127 4 4 Engineering Design CellMLB

Default/Recommen
PrbUsage PrbUsage:Off PrbUsage: Off CellMLB
ded Value
0~100 0 Null Engineering Design CellMLB
0~10000 0 Null Engineering Design CellMLB
0.1~10, step:0.1 10 Null Engineering Design CellMLB
 Default/Recommen
1~20 3 3 CellMLB
ded Value
 YES(YES). It is
recommended that
this parameter be Default/Recommen
NO, YES NO(NO) CellMLB
set to YES(YES) ded Value
when inter-RAT
MLB is enabled.
INTERRATMLBUE
INTERRATMLBUE L2UMLBTRIGGER
NUMTHD, Default/Recommen
NUMTHD(INTERRA STATUS(L2UMLBT CellMLB
L2UMLBTRIGGER ded Value
TMLBUENUMTHD) RIGGERSTATUS)
STATUS

Radio Planning
1~60 5 5 CellMLB
(Internal planning)
WEIGHTEDUENU WEIGHTEDUENU WEIGHTEDUENU Radio Planning
CellMLB
M M:Off M:Off (Internal planning)

Radio Planning
0~255 None None CellMlbAutoGroup
(Internal planning)
0~100 40 40 Engineering Design CellMlbAutoGroup
0~100 30 30 Engineering Design CellMlbAutoGroup
 Radio Planning
1~65535 1440 1440 CellMlbAutoGroup
(Internal planning)

Radio Planning
0~65535 1440 1440 CellMlbAutoGroup
(Internal planning)
NOT_ALLOWED, NOT_ALLOWED(N NOT_ALLOWED(N Default/Recommen
CellMlbAutoGroup
ALLOWED OT_ALLOWED) OT_ALLOWED) ded Value

Radio Planning
1~65535 1000 1000 CellMlbAutoGroup
(Internal planning)
FREE, Default/Recommen
FREE(FREE) FREE(FREE) CellMlbAutoGroup
CONTROLLED ded Value

Radio Planning
0~255 None None CellUSParaCfg
(Internal planning)
 UsUeGuaranteeSwi
tch:Off, UsUeGuaranteeSwi
UsHoSwitch:Off, tch:Off,
UsUeGuaranteeSwi UsCellReselSwitch: UsHoSwitch:Off,
tch, UsHoSwitch, Off, UsCellReselSwitch:
UsCellReselSwitch, UsUePuschPcPriori Off,
UsUePuschPcPriori tySwitch:Off, UsUePuschPcPriori
tySwitch, DlUsVoIPCqiAdjOpt tySwitch:Off,
DlUsVoIPCqiAdjOpt Switch:Off, UsCellNotDriveNsS
Switch, UsCellNotDriveNsS witch:Off,
UsCellNotDriveNsS witch:Off, NsRbRestrictSwitch
witch, NsRbRestrictSwitch :Off,
Radio Planning
NsRbRestrictSwitch :Off, UsCtrlDRXSwitch:O CellUSParaCfg
(Internal planning)
, UsCtrlDRXSwitch, UsCtrlDRXSwitch:O ff, SfCtrlAsScell:Off,
SfCtrlAsScell, ff, SfCtrlAsScell:Off, SfCtrlAsInterNcell:O
SfCtrlAsInterNcell, SfCtrlAsInterNcell:O ff,
UsSccHoSwitch, ff, UsSccHoSwitch:Off
UlUsVoipRbRsvSwi UsSccHoSwitch:Off ,
tch, , UlUsVoipRbRsvSwi
ULCoMPResource UlUsVoipRbRsvSwi tch:Off,
Ctrl, tch:Off, ULCoMPResource
UsUlCaSchSwitch ULCoMPResource Ctrl:Off,
Ctrl:Off, UsUlCaSchSwitch:
UsUlCaSchSwitch: Off
Off

Radio Planning
1~40 5 5 CellUSParaCfg
(Internal planning)
 It is recommended
that this parameter
be set to 1 when
the cell bandwidth
is 20 MHz or 15
MHz. It is
recommended that Radio Planning
1~40 1 CellUSParaCfg
this parameter be (Internal planning)
set to the same
value of the
PreallocationMinPer
iod parameter when
the cell bandwidth
is 10 MHz or less.

Radio Planning
45~1500 80 80 CellUSParaCfg
(Internal planning)

Radio Planning
45~1500 80 80 CellUSParaCfg
(Internal planning)
 Radio Planning
0~60000 1500 1500 CellUSParaCfg
(Internal planning)

Radio Planning
0~60000 1500 1500 CellUSParaCfg
(Internal planning)
 Radio Planning
0~100 5 5 CellUSParaCfg
(Internal planning)

Radio Planning
0~10000 5 5 CellUSParaCfg
(Internal planning)

Radio Planning
0~20 0 0 CellUSParaCfg
(Internal planning)
 Radio Planning
0~20 0 0 CellUSParaCfg
(Internal planning)

Radio Planning
0~255 255 255 CellUSParaCfg
(Internal planning)

Radio Planning
1~360 15 15 CellUSParaCfg
(Internal planning)

Radio Planning
3~3600 60 60 CellUSParaCfg
(Internal planning)
 Radio Planning
-141~-43 -106 -106 CellUSParaCfg
(Internal planning)

Radio Planning
-20~-3 -24 -24 CellUSParaCfg
(Internal planning)

Radio Planning
0~255 255 255 CellUSParaCfg
(Internal planning)

Radio Planning
0~255 255 255 CellUSParaCfg
(Internal planning)
DB_6_P_A,
DB_4DOT77_P_A,
DB_3_P_A,
DB_1DOT77_P_A, Radio Planning
DB_6_P_A(-6 dB) DB_6_P_A(-6 dB) CellUSParaCfg
DB0_P_A, (Internal planning)
DB1_P_A,
DB2_P_A,
DB3_P_A

Radio Planning
0~20 0 0 CellUSParaCfg
(Internal planning)
 Radio Planning
10~90 50 50 CellUSParaCfg
(Internal planning)

Radio Planning
1~21600 60 60 CellUSParaCfg
(Internal planning)
 Radio Planning
0~12500 0 0 CellUSParaCfg
(Internal planning)
 Radio Planning
0~12500 0 0 CellUSParaCfg
(Internal planning)

Radio Planning
0~5 0 0 CellUSParaCfg
(Internal planning)
 Radio Planning
0~99 0 0 CellUSParaCfg
(Internal planning)
 Radio Planning
0~99 0 0 CellUSParaCfg
(Internal planning)

Percent10, Radio Planning

Percent10 Percent10 CellUSParaCfg
Percent30 (Internal planning)

Radio Planning
0~65535 65535 65535 CellUSParaCfg
(Internal planning)
 Radio Planning
0~255 255 None CellUSParaCfg
(Internal planning)

Default/Recommen
0~1 1000 1000 CellUSParaCfg
ded Value
 Default/Recommen
0~1 1000 1000 CellUSParaCfg
ded Value

Radio Planning
0~255 None None CellPdcchAlgo
(Internal planning)

CONGREG_LV4,
CONGREG_LV4 CONGREG_LV4 Engineering Design CellPdcchAlgo
CONGREG_LV8
OFF, ON ON(On) ON(On) Engineering Design CellPdcchAlgo

1~50 40 40 Engineering Design CellPdcchAlgo

 (Enhanced CFI
Adaption On), this
parameter does not
take effect for the
bandwidths of 1.4
MHz and 3 MHz,
and the
recommended
parameter value is
1 for the
bandwidths larger
than 5 MHz. If the
PdcchSymNumSwit
ch parameter is set
to OFF(Off), the
recommended
value for the
bandwidth of 1.4
MHz is 4 and for
1~4 1 Engineering Design CellPdcchAlgo
other bandwidths is
3. In addition, if the
PdcchSymNumSwit
ch parameter is set
to OFF(Off) for a
small-bandwidth
cell, PDCCH
resources may be
insufficient due to
the smaller number
of occupied OFDM
symbols, and
accordingly UEs
cannot access the
cell. In this
scenario, the
minimum
recommended
value for the
0~100 0 0 Engineering Design CellPdcchAlgo
 In non-ultra-high-
speed scenarios
where the eNodeB
operates in FDD
mode, the
ECFIADAPTIONON
OFF, ON, parameter value
(Enhanced CFI Engineering Design CellPdcchAlgo
ECFIADAPTIONON ECFIADAPTIONON
Adaption On)
is recommended. In
other scenarios, the
parameter value
OFF is
recommended.
 lower limit is 65
when the eNodeB
uses four physical
antenna ports and
is 58 when the
eNodeB uses two
physical antenna
ports;
(4) If the cell
bandwidth and the
number of PDCCH
symbols are 15
MHz and 1,
respectively, the
lower limit is 100
when the eNodeB
uses either two or
four physical
1~100 100 antenna ports; Engineering Design CellPdcchAlgo
(5) If the cell
bandwidth and the
number of PDCCH
symbols are 15
MHz and 2,
respectively, the
lower limit is 80
when the eNodeB
uses four physical
antenna ports and
is 63 when the
eNodeB uses two
physical antenna
ports;
(6) If the cell
bandwidth and the
number of PDCCH
symbols are 15

OFF, ON ON(On) ON(On) Engineering Design CellPdcchAlgo

OFF, ON OFF(Off) OFF(Off) Engineering Design CellPdcchAlgo

AVERAGE,
MINUS_3DB_FIXE
AVERAGE(AVERA AVERAGE(AVERA
D, Engineering Design CellPdcchAlgo
GE) GE)
MINUS_6DB_FIXE
D
STRATEGYBASED STRATEGYBASED STRATEGYBASED
ONCAPACITY, ONCAPACITY(Cap ONCAPACITY(Cap
Engineering Design CellPdcchAlgo
STRATEGYBASED acity-based acity-based
ONCOVERAGE Selection Strategy) Selection Strategy)
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellPdcchAlgo
ded Value

Default/Recommen
0.75~1.2, step:0.01 75 75 CellPdcchAlgo
ded Value
 If the PDCCH
Symbol Number
Adjust Switch
parameter is set to
OFF, you are
advised to set this
parameter to 3.
1, 2, 3 3(3) Engineering Design CellPdcchAlgo
If the PDCCH
Symbol Number
Adjust Switch
parameter is set to
ON, you are
advised to set this
parameter to 1.
STRATEGYBASED STRATEGYBASED STRATEGYBASED
ONCOVERAGE, ONCOVERAGE(Co ONCOVERAGE(Co
Engineering Design CellPdcchAlgo
STRATEGYBASED verage-based verage-based
ONCAPACITY Selection Strategy) Selection Strategy)
 Default/Recommen
0~1 1 1 CellPdcchAlgo
ded Value
 Default/Recommen
0~50 24 24 CellPdcchAlgo
ded Value
ReserveCommonC ReserveCommonC ReserveCommonC Default/Recommen
CellPdcchAlgo
CESwitch CESwitch:Off CESwitch:Off ded Value
1_2, 1_1, 2_1, 3_1,
Radio Planning
4_1, 5_1, 6_1, 7_1, 1_2(1:2) 1_2(1:2) CellPdcchAlgo
(Internal planning)
8_1, 9_1, 10_1
OFF, ON OFF(Off) OFF(Off) Engineering Design CellPdcchAlgo

15 is recommended
in most scenarios.
Do not change the Default/Recommen
0~1, step:0.001 15 CellPdcchAlgo
parameter value ded Value
unless it is
necessary.
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) CellPdcchAlgo
ded Value
EpdcchFunctionSwi EpdcchFunctionSwi EpdcchFunctionSwi
Engineering Design CellPdcchAlgo
tch tch:Off tch:Off

Default/Recommen
0~100 80 80 CellPdcchAlgo
ded Value
 Default/Recommen
0~100 60 60 CellPdcchAlgo
ded Value

Default/Recommen
0~100 60 60 CellPdcchAlgo
ded Value

Default/Recommen
0~100 5 5 CellPdcchAlgo
ded Value
 Default/Recommen
0~100 80 80 CellPdcchAlgo
ded Value

Radio Planning
0~255 None None CellPucchAlgo
(Internal planning)
 SA0 or SA1, the
recommended
value is 0 for
bandwidths of 1.4
MHz and 3 MHz,
and 5 for
bandwidths of 5
MHz, 10 MHz, 15
MHz, and 20 MHz.
In TDD mode with
the
SubframeAssignme
nt parameter set to
SA2 or SA5, the
recommended
value is 0 for all
bandwidths.
If a competition test
on the access delay Default/Recommen
0~50 10 CellPucchAlgo
or handover delay ded Value
is to be conducted
with UL
preallocation
disabled, set this
parameter to a
value greater than
1.
It is recommended
that the default
value of the
parameter be
retained. If
adjustments are
mandatory, avoid
setting this
parameter to an
excessively large
value as it may lead
 Default/Recommen
FALSE, TRUE FALSE(FALSE) FALSE(FALSE) CellPucchAlgo
ded Value
SriAdaptiveHoldFor SriAdaptiveHoldFor SriAdaptiveHoldFor
VoIPSW, VoIPSW:Off, VoIPSW:Off,
SriPeriodCfgOptSW SriPeriodCfgOptSW SriPeriodCfgOptSW Default/Recommen
CellPucchAlgo
, :Off, :Off, ded Value
SriOffsetReConfigF SriOffsetReConfigF SriOffsetReConfigF
orDrxSW orDrxSW:Off orDrxSW:Off

Radio Planning CellCounterParaGr

0~255 None None
(Internal planning) oup
 Default/Recommen CellCounterParaGr
0~10800 400 400
ded Value oup
 Default/Recommen CellCounterParaGr
OFF, ON OFF(Off) OFF
ded Value oup
BasedA3EdgeUser BasedA3EdgeUser BasedA3EdgeUser Default/Recommen CellCounterParaGr
Switch Switch:Off Switch:Off ded Value oup

Default/Recommen CellCounterParaGr
-15~15 -13 -13
ded Value oup
 Default/Recommen CellCounterParaGr
1~1000000 512 512
ded Value oup

Default/Recommen CellCounterParaGr
1~1000000 1024 1024
ded Value oup
 Default/Recommen CellCounterParaGr
1~1000000 2048 2048
ded Value oup

Default/Recommen CellCounterParaGr
1~1000000 5120 5120
ded Value oup
 Default/Recommen CellCounterParaGr
1~1000000 10240 10240
ded Value oup

Default/Recommen CellCounterParaGr
1~1000000 15360 15360
ded Value oup
 Default/Recommen CellCounterParaGr
1~1000000 20480 20480
ded Value oup

Default/Recommen CellCounterParaGr
1~1000000 40960 40960
ded Value oup
 Default/Recommen CellCounterParaGr
1~1000000 81920 81920
ded Value oup

Default/Recommen CellCounterParaGr
1~1000000 256 256
ded Value oup
 Default/Recommen CellCounterParaGr
1~1000000 512 512
ded Value oup

Default/Recommen CellCounterParaGr
1~1000000 1024 1024
ded Value oup
 Default/Recommen CellCounterParaGr
1~1000000 2048 2048
ded Value oup

Default/Recommen CellCounterParaGr
1~1000000 5120 5120
ded Value oup
 Default/Recommen CellCounterParaGr
1~1000000 10240 10240
ded Value oup

Default/Recommen CellCounterParaGr
1~1000000 15360 15360
ded Value oup
 Default/Recommen CellCounterParaGr
1~1000000 20480 20480
ded Value oup

Default/Recommen CellCounterParaGr
1~1000000 40960 40960
ded Value oup
 Default/Recommen CellCounterParaGr
0~100 0 0
ded Value oup

Radio Planning TddCellFrameOffse

0~255 None None
(Internal planning) t
CustomFrameOffse
CustomFrameOffse
t, TL_FrameOffset, Default/Recommen TddCellFrameOffse
t(User-defined None
TL_FrameOffset_S ded Value t
frame offset)
A2_SSP5

0~261120,275943~ TddCellFrameOffse
0 None Engineering Design
307200 t

Radio Planning CellNoAccessAlmP

0~255 None None
(Internal planning) ara
 Default/Recommen CellNoAccessAlmP
00:00:00~23:59:59 00:00:00 00:00:00
ded Value ara

Default/Recommen CellNoAccessAlmP
00:00:00~23:59:59 00:00:00 00:00:00
ded Value ara
 Default/Recommen CellNoAccessAlmP
0~72 0 0
ded Value ara

Radio Planning
0~255 None None CellUlIcic
(Internal planning)

If this parameter is
not set to
INVALID(Invalid UL
band division
scheme), it is
recommended that
this parameter be
set to different
values in
neighboring cells. If
it is impossible for
INVALID(Invalid UL
MODE1, MODE2, neighboring cells to
band division Engineering Design CellUlIcic
MODE3, INVALID use mutually
scheme)
different band
modes, it is
recommended that
this parameter be
set to the same
value in
neighboring cells
that has the
weakest
interference to each
other.

Radio Planning
0~255 None None GeranInterfCfg
(Internal planning)
 Set this parameter
based on the
2~20 1 number of RBs Engineering Design GeranInterfCfg
interfered by the
GERAN cell.

-6~12 -3 -3 Engineering Design GeranInterfCfg

 Radio Planning
0~255 None None CellRelayAlgoPara
(Internal planning)

1_10, 2_10, 3_10,

4_10, 5_10, 6_10, Radio Planning
None None CellRelayAlgoPara
7_10, 8_10, 9_10, (Internal planning)
10_10
1_10, 2_10, 3_10,
4_10, 5_10, 6_10, Radio Planning
None None CellRelayAlgoPara
7_10, 8_10, 9_10, (Internal planning)
10_10

Radio Planning
1~40 5 5 CellRelayAlgoPara
(Internal planning)
 Radio Planning
45~1500 80 80 CellRelayAlgoPara
(Internal planning)

0.01~0.99, Radio Planning

10 10 CellRelayAlgoPara
step:0.01 (Internal planning)

0.01~0.99, Radio Planning

10 10 CellRelayAlgoPara
step:0.01 (Internal planning)
UlSPSDegradeSwit UlSPSDegradeSwit UlSPSDegradeSwit Radio Planning
CellRelayAlgoPara
ch ch:off ch:Off (Internal planning)

DlSPSDegradeSwit DlSPSDegradeSwit DlSPSDegradeSwit Radio Planning

CellRelayAlgoPara
ch ch:off ch:Off (Internal planning)

Radio Planning
0~255 None None CellSimuLoad
(Internal planning)
 Default/Recommen
0~9 4 4 CellSimuLoad
ded Value
TM1, TM2, TM4, Default/Recommen
TM2(TM2) TM2(TM2) CellSimuLoad
TM7, TM8, TM9 ded Value

Default/Recommen
0~15 4 null CellSimuLoad
ded Value
 Default/Recommen
0~70560 0 0 CellSimuLoad
ded Value

0~100 None None N/A CellSimuLoad

0~100 None None N/A CellSimuLoad

0~42949672.95 None None N/A CellSimuLoad

0~42949672.95 None None N/A CellSimuLoad

0~1200 None None N/A CellSimuLoad

0~1200 None None N/A CellSimuLoad

0~70560 None None N/A CellSimuLoad

Radio Planning SfnEdgeRruRelatio

0~255 None None
(Internal planning) n

Radio Planning SfnEdgeRruRelatio

0~65535 None None
(Internal planning) n

Radio Planning SfnEdgeRruRelatio

000~999 None None
(Internal planning) n
 Radio Planning SfnEdgeRruRelatio
00~99,000~999 None None
(Internal planning) n

Radio Planning SfnEdgeRruRelatio

0~1048575 None None
(Internal planning) n

Radio Planning SfnEdgeRruRelatio

0~255 None None
(Internal planning) n

Radio Planning SfnEdgeRruRelatio

0~65535 None None
(Internal planning) n
 Radio Planning
0~255 None None BcchCfg
(Internal planning)

MOD_PERIOD_CO
EFF_N2,
MOD_PERIOD_CO
EFF_N4, MOD_PERIOD_CO MOD_PERIOD_CO Default/Recommen
BcchCfg
MOD_PERIOD_CO EFF_N2(2) EFF_N2(2) ded Value
EFF_N8,
MOD_PERIOD_CO
EFF_N16

Radio Planning
0~255 None None CellChPwrCfg
(Internal planning)
 advised to set
PcfichPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
PcfichPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
PcfichPwr to 400.
When PaPcOff is
set to 3, you are
advised to set
PcfichPwr to 600.
In LTE TDD, if the
cell bandwidth is
10, 15, or 20 MHz,
you are advised to
Default/Recommen
-15.875~15.875 -600 set PcfichPwr to the CellChPwrCfg
ded Value
value of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
PcfichPwr to -600.
When PaPcOff is
set to -4.77, you are
advised to set
PcfichPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
PcfichPwr to 0.
When PaPcOff is
set to -1.77, you are
advised to set
PcfichPwr to 246.
 parameter is
recommended to be
the same as the
setting of PaPcOff.
PbchPwr can be set
as follows:
When PaPcOff is
set to -6, you are
advised to set
PbchPwr to -1200.
When PaPcOff is
set to -4.77, you are
advised to set
PbchPwr to -954.
When PaPcOff is
set to -3, you are
advised to set
PbchPwr to -600.
Default/Recommen
-15.875~15.875 -600 When PaPcOff is CellChPwrCfg
ded Value
set to -1.77, you are
advised to set
PbchPwr to -354.
When PaPcOff is
set to 0, you are
advised to set
PbchPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
PbchPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
PbchPwr to 400.
When PaPcOff is
set to 3, you are
advised to set
 is 10, 15, or 20
MHz, you are
advised to set this
parameter to the
value of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
SchPwr to -600.
When PaPcOff is
set to -4.77, you are
advised to set
SchPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
SchPwr to 0.
When PaPcOff is Default/Recommen
-15.875~15.875 0 CellChPwrCfg
set to -1.77, you are ded Value
advised to set
SchPwr to 246.
When PaPcOff is
set to 0, you are
advised to set
SchPwr to 600.
When PaPcOff is
set to 1, you are
advised to set
SchPwr to 800.
When PaPcOff is
set to 2, you are
advised to set
SchPwr to 1000.
When PaPcOff is
set to 3, you are
advised to set
SchPwr to 1200.
 parameter is
recommended to be
the same as the
setting of PaPcOff.
DbchPwr can be
set as follows:
When PaPcOff is
set to -6, you are
advised to set
DbchPwr to -1200.
When PaPcOff is
set to -4.77, you are
advised to set
DbchPwr to -954.
When PaPcOff is
set to -3, you are
advised to set
DbchPwr to -600.
Default/Recommen
-15.875~15.875 -600 When PaPcOff is CellChPwrCfg
ded Value
set to -1.77, you are
advised to set
DbchPwr to -354.
When PaPcOff is
set to 0, you are
advised to set
DbchPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
DbchPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
DbchPwr to 400.
When PaPcOff is
set to 3, you are
advised to set
 is 10, 15, or 20
MHz, you are
advised to set this
parameter to the
value of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
PchPwr to -600.
When PaPcOff is
set to -4.77, you are
advised to set
PchPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
PchPwr to 0.
When PaPcOff is Default/Recommen
-15.875~15.875 0 CellChPwrCfg
set to -1.77, you are ded Value
advised to set
PchPwr to 246.
When PaPcOff is
set to 0, you are
advised to set
PchPwr to 600.
When PaPcOff is
set to 1, you are
advised to set
PchPwr to 800.
When PaPcOff is
set to 2, you are
advised to set
PchPwr to 1000.
When PaPcOff is
set to 3, you are
advised to set
PchPwr to 1200.
 is 10, 15, or 20
MHz, you are
advised to set this
parameter to the
value of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
RaRspPwr to -600.
When PaPcOff is
set to -4.77, you are
advised to set
RaRspPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
RaRspPwr to 0.
When PaPcOff is Default/Recommen
-15.875~15.875 0 CellChPwrCfg
set to -1.77, you are ded Value
advised to set
RaRspPwr to 246.
When PaPcOff is
set to 0, you are
advised to set
RaRspPwr to 600.
When PaPcOff is
set to 1, you are
advised to set
RaRspPwr to 800.
When PaPcOff is
set to 2, you are
advised to set
RaRspPwr to 1000.
When PaPcOff is
set to 3, you are
advised to set
RaRspPwr to 1200.
 is 10, 15, or 20
MHz, you are
advised to set this
parameter to the
value of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
PrsPwr to -600.
When PaPcOff is
set to -4.77, you are
advised to set
PrsPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
PrsPwr to 0.
When PaPcOff is Default/Recommen
-15.875~15.875 0 CellChPwrCfg
set to -1.77, you are ded Value
advised to set
PrsPwr to 246.
When PaPcOff is
set to 0, you are
advised to set
PrsPwr to 600.
When PaPcOff is
set to 1, you are
advised to set
PrsPwr to 800.
When PaPcOff is
set to 2, you are
advised to set
PrsPwr to 1000.
When PaPcOff is
set to 3, you are
advised to set
PrsPwr to 1200.

Default/Recommen
20~40 20 20 CellChPwrCfg
ded Value
 Radio Planning
0~6,255 255 None CellChPwrCfg
(Internal planning)

Default/Recommen
OFF, ON OFF(OFF) OFF(OFF) CellChPwrCfg
ded Value
 Radio Planning
0~255 None None PDSCHCfg
(Internal planning)

Default/Recommen
-60~50 182 None PDSCHCfg
ded Value
 Single-antenna: 0; Default/Recommen
0~3 1 PDSCHCfg
double-antenna: 1 ded Value

Default/Recommen
0~6 0 None PDSCHCfg
ded Value

Radio Planning
0~255 None None RACHCfg
(Internal planning)
DB0_PWR_RAMPI
NG_STEP,
DB2_PWR_RAMPI
NG_STEP, DB2_PWR_RAMPI DB2_PWR_RAMPI Default/Recommen
RACHCfg
DB4_PWR_RAMPI NG_STEP(2dB) NG_STEP(2dB) ded Value
NG_STEP,
DB6_PWR_RAMPI
NG_STEP

DBM_120,
DBM_118,
DBM_116,
DBM_114,
DBM_112,
DBM_110,
DBM_108, DBM_104(- DBM_104(- Default/Recommen
RACHCfg
DBM_106, 104dBm) 104dBm) ded Value
DBM_104,
DBM_102,
DBM_100,
DBM_98, DBM_96,
DBM_94, DBM_92,
DBM_90
0~15 None None N/A RACHCfg

B56_MSG_SIZE_G
ROUPA,
B144_MSG_SIZE_
GROUPA, B56_MSG_SIZE_G B56_MSG_SIZE_G Default/Recommen
RACHCfg
B208_MSG_SIZE_ ROUPA(56bits) ROUPA(56bits) ded Value
GROUPA,
B256_MSG_SIZE_
GROUPA

0~94 6 6 Engineering Design RACHCfg

 NOT_CFG(Not NOT_CFG(Not Default/Recommen
NOT_CFG, CFG RACHCfg
configure) configure) ded Value

can be set to 63 or
a value in the range
of 48 to 53.
For TDD cells
established on an
LBBPd or UBBP:
If a cell is
configured with
HighSpeedFlag of
LOW_SPEED and
preamble format of
0:
Subframe
assignment of 0,
this parameter can
be set to a value in
the range of 0 to 8.
Subframe
assignment of 1,
0~63 3 Engineering Design RACHCfg
this parameter can
be set to a value in
the range of 0 to 7.
Subframe
assignment of 2,
this parameter can
be set to 6 or a
value in the range
of 0 to 4.
Subframe
assignment of 5,
this parameter can
be set to 3, 0, or 1.
If a cell is
configured with
HighSpeedFlag of
LOW_SPEED and
preamble format of
1:
N3_PREMB_TRAN
S_MAX,
N4_PREMB_TRAN
S_MAX,
N5_PREMB_TRAN
S_MAX,
N6_PREMB_TRAN
S_MAX,
N7_PREMB_TRAN
S_MAX,
N8_PREMB_TRAN N10_PREMB_TRA N10_PREMB_TRA Default/Recommen
RACHCfg
S_MAX, NS_MAX(10times) NS_MAX(10times) ded Value
N10_PREMB_TRA
NS_MAX,
N20_PREMB_TRA
NS_MAX,
N50_PREMB_TRA
NS_MAX,
N100_PREMB_TR
ANS_MAX,
N200_PREMB_TR
ANS_MAX

SF40_MAC_RESO
LUTION_TIMER,
SF48_MAC_RESO
SF64_MAC_RESO SF64_MAC_RESO
LUTION_TIMER, Default/Recommen
LUTION_TIMER(64 LUTION_TIMER(64 RACHCfg
SF56_MAC_RESO ded Value
) )
LUTION_TIMER,
SF64_MAC_RESO
LUTION_TIMER
 Default/Recommen
1~8 5 5 RACHCfg
ded Value

Ratio4, Ratio8,
Ratio12, Ratio16,
Ratio20, Ratio24,
Ratio28, Ratio32, Radio Planning
Ratio52(52/64) Ratio52(52/64) RACHCfg
Ratio36, Ratio40, (Internal planning)
Ratio44, Ratio48,
Ratio52, Ratio56,
Ratio60, Ratio64
 It is recommended
that this parameter
be set based on the
counters
L.RA.GrpA.Att
(indicating the
number of group A
random preambles
received) and
L.RA.GrpB.Att
Radio Planning
6~100 50 (indicating the RACHCfg
(Internal planning)
number of group B
random preambles
received). That is,
set this parameter
based on the value
calculated by the
following formula:
L.RA.GrpA.Att/
(L.RA.GrpA.Att+L.R
A.GrpB.Att).

Radio Planning
0~255 None None SRSCfg
(Internal planning)
 The value SC3(3) is
SC0, SC1, SC2,
recommended for
SC3, SC4, SC5,
FDD cells.
SC6, SC7, SC8, SC3(3) Engineering Design SRSCfg
The value SC0(0) is
SC9, SC10, SC11,
recommended for
SC12, SC13, SC14
TDD cells.
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( Default/Recommen
SRSCfg
BOOLEAN_TRUE True) True) ded Value
BOOLEAN_FALSE, BOOLEAN_TRUE( Default/Recommen
BOOLEAN_TRUE SRSCfg
BOOLEAN_TRUE True) ded Value
ACCESS_FIRST,
EXPERIENCE_FIR
ST, ACCESS_ENHANC ACCESS_ENHANC
EXPERIENCE_EN ED(Access ED(Access Engineering Design SRSCfg
HANCED, Enhanced) Enhanced)
ACCESS_ENHANC
ED
 The parameter
value
ADAPTIVEMODE(A
daptive Mode) is
recommended for
common cells. The
parameter value
DEFAULTMODE(D
DEFAULTMODE, ADAPTIVEMODE(A efault Mode) is
N/A SRSCfg
ADAPTIVEMODE daptive Mode) recommended for
SFN cells, CSPC
cells, LampSite
cells equipped with
MPRU_AGGREGA
TION cells, high-
speed cells, and
ultra-high-speed
cells.
SrsSubframeRecfg SrsSubframeRecfg SrsSubframeRecfg
N/A SRSCfg
OptSwitch OptSwitch:Off OptSwitch:Off

BW0, BW1, BW2,

BW3, BW4, BW5,
BW6, BW7, None None N/A SRSCfg
INVALID_BANDWI
DTH

Radio Planning
0~255 None None PHICHCfg
(Internal planning)
NORMAL, Default/Recommen
NORMAL NORMAL PHICHCfg
EXTENDED ded Value

ONE_SIXTH, HALF, Default/Recommen

ONE ONE PHICHCfg
ONE, TWO ded Value

Radio Planning
0~255 None None PCCHCfg
(Internal planning)
rf32, rf64, rf128, rf128(128 radio rf128(128 radio Default/Recommen
PCCHCfg
rf256 frames) frames) ded Value

FOURT, TWOT,
ONET, HALFT,
QUARTERT,
ONE_EIGHTT, Default/Recommen
ONET ONET PCCHCfg
ONE_SIXTEENTHT ded Value
,
ONE_THIRTY_SEC
ONDT
 Default/Recommen
1~3 1 1 PCCHCfg
ded Value
 1. 16 for cells in a
bandwidth of 20
MHz or 15 MHz;
2. 8 for cells in a
Default/Recommen
1~16 16 bandwidth of 10 PCCHCfg
ded Value
MHz or 5 MHz;
3. 4 for cells in a
bandwidth of 3.3
MHz or 1.4 MHz.
PAGING_STRATE
PAGING_STRATE PAGING_STRATE
GY_FIFO,
GY_FIFO(First-in GY_FIFO(First-in Engineering Design PCCHCfg
PAGING_STRATE
First-out Strategy) First-out Strategy)
GY_DIFFPRI

Radio Planning
0~255 None None PUSCHCfg
(Internal planning)
 are set to
HOPPING_TYPE2
and
INTER_SUB_FRA
ME, respectively,
the recommended
value of this
parameter is 4.
If UlHoppingType
and HoppingMode
are set to
HOPPING_TYPE2
and
INTRA_AND_INTE
R_SUB_FRAME,
respectively, the
recommended
value of this
parameter is 1. Default/Recommen
1~4 4 PUSCHCfg
If UlHoppingType ded Value
and HoppingMode
are set to
HOPPING_TYPE2_
RANDOM and
INTER_SUB_FRA
ME, respectively,
the recommended
value of this
parameter is 4.
If UlHoppingType
and HoppingMode
are set to
HOPPING_TYPE2_
RANDOM and
INTRA_AND_INTE
R_SUB_FRAME,
respectively, the
recommended

INTER_SUB_FRA
ME, INTER_SUB_FRA INTER_SUB_FRA Default/Recommen
PUSCHCfg
INTRA_AND_INTE ME(Inter) ME(Inter) ded Value
R_SUB_FRAME
 corresponding to
cell bandwidths in
ascending order; if
DeltaShift is set to
DS3_DELTA_SHIFT
, the recommended
values of this
parameter are 0, 0,
9, 16, 21, and 24,
corresponding to
cell bandwidths in
ascending order.
In TDD cells with
the uplink-downlink
subframe
configuration of
SA1 and with the
extended CP
Default/Recommen
0~98 22 length, if DeltaShift PUSCHCfg
ded Value
is set to
DS2_DELTA_SHIFT
, the recommended
values of this
parameter are 0, 0,
6, 11, 16, and 19,
corresponding to
cell bandwidths in
ascending order;if
DeltaShift is set to
DS3_DELTA_SHIFT
, the recommended
values of this
parameter are 0, 0,
8, 15, 22, and 26,
corresponding to
cell bandwidths in
ascending order.
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE(
Engineering Design PUSCHCfg
BOOLEAN_TRUE False) False)
0~29 0 0 Engineering Design PUSCHCfg
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE(
Engineering Design PUSCHCfg
BOOLEAN_TRUE False) False)

Default/Recommen
0~7 0 0 PUSCHCfg
ded Value
 It is recommended
that this parameter
be set to
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_FALSE( Default/Recommen
PUSCHCfg
BOOLEAN_TRUE True) False) by default ded Value
because the UL
64QAM feature is
license-controlled.

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_TRUE( Radio Planning

PUSCHCfg
BOOLEAN_TRUE False) True) (Internal planning)

Radio Planning
0~255 None None PUCCHCfg
(Internal planning)
 For a cell
established on an
LBBPc and
configured with the
normal cyclic prefix
(CP), the parameter
value
DS2_DELTA_SHIF
T is recommended.
For a cell
established on an
LBBPc and
configured with the
extended CP, the
DS1_DELTA_SHIFT
parameter value
,
DS3_DELTA_SHIF
DS2_DELTA_SHIFT DS1_DELTA_SHIF Default/Recommen
T is recommended. PUCCHCfg
, T(ds1) ded Value
For a cell
DS3_DELTA_SHIF
established on an
T
LBBPd or UBBP
and configured with
the normal CP, the
parameter value
DS1_DELTA_SHIF
T is recommended.
For a cell
established on an
LBBPd or UBBP
and configured with
extended CP, the
parameter value
DS3_DELTA_SHIF
T is recommended.

0~1000 6 6 Engineering Design PUCCHCfg

0~20 1 1 Engineering Design PUCCHCfg

2~48 1 On Engineering Design PUCCHCfg

0~2047 None None N/A PUCCHCfg

 When the number
of UEs in the cell is
small (in newly
deployed sites or in
off-peak hours), this
parameter can be
set to either
FIXEDMODE(Fixed
Mode) or
RANDOMMODE(R
andom Mode).
When the number
of UEs in the cell is
FIXEDMODE,
large, the
RANDOMMODE, FIXEDMODE(Fixed Default/Recommen
parameter value PUCCHCfg
OPTISELECTMOD Mode) ded Value
RANDOMMODE(R
E
andom Mode) is
recommended.
In high speed
railway scenarios, if
a small number of
PUCCH RB
resources is
required, the
parameter value
OPTISELECTMOD
E(OPTISELECTMO
DE) is
recommended.
OFF,
QCIADAPTIVE(QCI QCIADAPTIVE(QCI
QCIADAPTIVE, Engineering Design PUCCHCfg
ADAPTIVE) ADAPTIVE)
NOQCIADAPTIVE

RANDOMMODE(R
andom Mode) is
recommended
FIXEDMODE, FIXEDMODE(Fixed Default/Recommen
though the default PUCCHCfg
RANDOMMODE Mode) ded Value
value is
FIXEDMODE(Fixed
Mode).
 Radio Planning Cdma20001XrttPre
0~255 None None
(Internal planning) Reg

Radio Planning Cdma20001XrttPre

000~999 None None
(Internal planning) Reg

Radio Planning Cdma20001XrttPre

00~99,000~999 None None
(Internal planning) Reg
 Radio Planning Cdma20001XrttPre
1~4095 None None
(Internal planning) Reg

Radio Planning Cdma20001XrttPre

0~15 None None
(Internal planning) Reg

Radio Planning Cdma20001XrttPre

0~32767 None None
(Internal planning) Reg
 Radio Planning Cdma20001XrttPre
0~65535 None None
(Internal planning) Reg
 Cdma20001XrttPre
0~8 characters None None Engineering Design
Reg

NOT_CFG(Not NOT_CFG(Not Radio Planning Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) (Internal planning) Reg
bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
Default/Recommen Cdma20001XrttPre
bc11, bc12, bc13, bc3 bc3(bc3)
ded Value Reg
bc14, bc15, bc16,
bc17, bc18, bc19,
bc20, bc21

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre

BOOLEAN_TRUE False) False) ded Value Reg
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre
BOOLEAN_TRUE False) False) ded Value Reg

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre

BOOLEAN_TRUE False) False) ded Value Reg
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre
BOOLEAN_TRUE False) False) ded Value Reg

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre

BOOLEAN_TRUE False) False) ded Value Reg
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre
BOOLEAN_TRUE False) False) ded Value Reg

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre

BOOLEAN_TRUE False) False) ded Value Reg
 Radio Planning Cdma20001XrttPre
0~127 0 0
(Internal planning) Reg

Radio Planning Cdma20001XrttPre

0~4095 0 0
(Internal planning) Reg
 Radio Planning Cdma20001XrttPre
0~7 1 1
(Internal planning) Reg

Radio Planning Cdma20001XrttPre

0~7 7 7
(Internal planning) Reg
 NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre
NOT_CFG, CFG
configure) configure) ded Value Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg

Default/Recommen Cdma20001XrttPre
0~63 0 0
ded Value Reg
 Default/Recommen Cdma20001XrttPre
0~7 0 0
ded Value Reg

Default/Recommen Cdma20001XrttPre
0~7 0 0
ded Value Reg

Default/Recommen Cdma20001XrttPre
0~7 0 0
ded Value Reg
 Default/Recommen Cdma20001XrttPre
0~7 0 0
ded Value Reg

Default/Recommen Cdma20001XrttPre
0~7 0 0
ded Value Reg

Default/Recommen Cdma20001XrttPre
0~7 0 0
ded Value Reg
 Default/Recommen Cdma20001XrttPre
0~7 0 0
ded Value Reg

Default/Recommen Cdma20001XrttPre
0~7 0 0
ded Value Reg

Default/Recommen Cdma20001XrttPre
0~7 0 0
ded Value Reg
 NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre
NOT_CFG, CFG
configure) configure) ded Value Reg

Radio Planning Cdma20001XrttPre

0~255 6 6
(Internal planning) Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg

Radio Planning Cdma20001XrttPre

0~255 2 2
(Internal planning) Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg
 Default/Recommen Cdma20001XrttPre
NO, YES YES(YES) YES(YES)
ded Value Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg

Radio Planning Cdma20001XrttPre

0~7 1 1
(Internal planning) Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg

IMSIS_ESN, IMSI, IMSI_ESN(IMSI IMSI_ESN(IMSI Default/Recommen Cdma20001XrttPre

IMSI_ESN and ESN) and ESN) ded Value Reg
 NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre
NOT_CFG, CFG
configure) configure) ded Value Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg
 Default/Recommen Cdma20001XrttPre
NO, YES NO(NO) NO(No)
ded Value Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg

Default/Recommen Cdma20001XrttPre
0~31.875 40 40
ded Value Reg

Default/Recommen Cdma20001XrttPre
0~31.875 48 48
ded Value Reg
 Default/Recommen Cdma20001XrttPre
0~31.875 42 42
ded Value Reg

Default/Recommen Cdma20001XrttPre
0~31.875 40 40
ded Value Reg

Default/Recommen Cdma20001XrttPre
0~31.875 40 40
ded Value Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg
 Radio Planning Cdma20001XrttPre
1~15 4 4
(Internal planning) Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg
 NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre
NOT_CFG, CFG
configure) configure) ded Value Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre

NOT_CFG, CFG
configure) configure) ded Value Reg

Default/Recommen Cdma20001XrttPre
0~20400 30 30
ded Value Reg
 NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma20001XrttPre
NOT_CFG, CFG
configure) configure) ded Value Reg

Radio Planning Cdma20001XrttPre

0~25500 60 60
(Internal planning) Reg

Radio Planning Cdma2000HrpdNC

0~255 None None
(Internal planning) ell
 Radio Planning Cdma2000HrpdNC
3~28 characters None None
(Internal planning) ell
 Radio Planning Cdma2000HrpdNC
3~8 characters None None
(Internal planning) ell

bc0, bc1, bc2, bc3,

bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
Radio Planning Cdma2000HrpdNC
bc11, bc12, bc13, None None
(Internal planning) ell
bc14, bc15, bc16,
bc17, bc18, bc19,
bc20, bc21
 Radio Planning Cdma2000HrpdNC
0~2047 None None
(Internal planning) ell

PERMIT_HO_ENU
M, PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning Cdma2000HrpdNC
FORBID_HO_ENU M(Permit Ho) M(Permit Ho) (Internal planning) ell
M

PERMIT_RMV_EN
PERMIT_RMV_EN PERMIT_RMV_EN
UM, Radio Planning Cdma2000HrpdNC
UM(Permit ANR UM(Permit ANR
FORBID_RMV_EN (Internal planning) ell
Remove) Remove)
UM

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Cdma2000HrpdNC

Engineering Design
BOOLEAN_TRUE False) False) ell
 Cdma2000HrpdNC
0~99 characters NULL(empty string) None Engineering Design
ell

Cdma2000HrpdNC
0~99 characters NULL(empty string) None Engineering Design
ell
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning Cdma2000HrpdNC
MANUAL_MODE Mode) Mode) (Internal planning) ell

Radio Planning Cdma2000HrpdPre

0~255 None None
(Internal planning) Reg
 Radio Planning Cdma2000HrpdPre
000~999 None None
(Internal planning) Reg

Radio Planning Cdma2000HrpdPre

00~99,000~999 None None
(Internal planning) Reg
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma2000HrpdPre
BOOLEAN_TRUE False) False) ded Value Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma2000HrpdPre

NOT_CFG, CFG
configure) configure) ded Value Reg

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen Cdma2000HrpdPre

BOOLEAN_TRUE False) False) ded Value Reg

Radio Planning Cdma2000HrpdPre

0~255 0 0
(Internal planning) Reg
 NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma2000HrpdPre
NOT_CFG, CFG
configure) configure) ded Value Reg

Radio Planning Cdma2000HrpdPre

0~255 0 None
(Internal planning) Reg

NOT_CFG(Not NOT_CFG(Not Default/Recommen Cdma2000HrpdPre

NOT_CFG, CFG
configure) configure) ded Value Reg
 Radio Planning Cdma2000HrpdPre
0~255 0 None
(Internal planning) Reg

Radio Planning Cdma2000HrpdRef

0~255 None None
(Internal planning) Cell

Radio Planning Cdma2000HrpdRef

000~999 None None
(Internal planning) Cell
 Radio Planning Cdma2000HrpdRef
00~99,000~999 None None
(Internal planning) Cell

Radio Planning Cdma2000HrpdRef

3~28 characters None None
(Internal planning) Cell
 Radio Planning Cdma2000HrpdRef
3~8 characters None None
(Internal planning) Cell
 Radio Planning Cdma2000HrpdRef
0~50 None None
(Internal planning) Cell

Radio Planning
0~255 None None Cdma2000Nfreq
(Internal planning)

bc0, bc1, bc2, bc3,

bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
Radio Planning
bc11, bc12, bc13, None None Cdma2000Nfreq
(Internal planning)
bc14, bc15, bc16,
bc17, bc18, bc19,
bc20, bc21
 Radio Planning
0~2047 None None Cdma2000Nfreq
(Internal planning)

-15~15 0 0 Engineering Design Cdma2000Nfreq

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design Cdma2000Nfreq
configure) configure)
0~15 8 8 Engineering Design Cdma2000Nfreq

0~32 0 0 Engineering Design Cdma2000Nfreq

Default/Recommen
0~65535 None None Cluster
ded Value
CSPC, DLCOMP,
CSPC(CSPC) None Engineering Design Cluster
CAMC

Default/Recommen
0~65535 None None ClusterCell
ded Value

Radio Planning
000~999 None None ClusterCell
(Internal planning)
 Radio Planning
00~99,000~999 None None ClusterCell
(Internal planning)

Radio Planning
0~1048575 None None ClusterCell
(Internal planning)
 Radio Planning
0~255 None None ClusterCell
(Internal planning)

DLCOMP_STATUS
_NORMAL,
CELL_OUTBOUND
,
CELL_CONFIG_DI
FF,
None None N/A ClusterCell
EX2_ABNORMAL,
CELL_ABNORMAL,
SCHNODE_ABNO
RMAL,
OTHER_ABNORM
AL
ULCAMC_STATUS
_NORMAL,
CELL_STATUS_AB
NORMAL,
CLOCK_ABNORM
AL,
ULCAMC_SWITCH
,
CLUSTER_ABNOR
MAL,
LINK_ABNORMAL, None None N/A ClusterCell
LINK_CONGESTIO
N, RTT_DELAY,
MULTI_CLUSTER_
ABNORMAL,
NO_COMMAND_R
ECEIVED,
CONTROL_NODE_
FAILURE,
OTHER_ABNORM
AL
 Radio Planning CspcCellSrsMeasN
000~999 None None
(Internal planning) Cell

Radio Planning CspcCellSrsMeasN

00~99,000~999 None None
(Internal planning) Cell
 Radio Planning CspcCellSrsMeasN
0~1048575 None None
(Internal planning) Cell

Radio Planning CspcCellSrsMeasN

0~255 None None
(Internal planning) Cell
 Radio Planning CspcCellSrsMeasN
000~999 None None
(Internal planning) Cell

Radio Planning CspcCellSrsMeasN

00~99,000~999 None None
(Internal planning) Cell
 Radio Planning CspcCellSrsMeasN
0~1048575 None None
(Internal planning) Cell
 Radio Planning CspcCellSrsMeasN
0~255 None None
(Internal planning) Cell

Default/Recommen
0~19 None None CspcCluster
ded Value

Default/Recommen
0~19 None None CspcClusterCell
ded Value
 Radio Planning
000~999 None None CspcClusterCell
(Internal planning)

Radio Planning
00~99,000~999 None None CspcClusterCell
(Internal planning)
 Radio Planning
0~1048575 None None CspcClusterCell
(Internal planning)

Radio Planning
0~255 None None CspcClusterCell
(Internal planning)
 Radio Planning EutranExternalCell
000~999 None None
(Internal planning) Plmn

Radio Planning EutranExternalCell

00~99,000~999 None None
(Internal planning) Plmn

Radio Planning EutranExternalCell

0~1048575 None None
(Internal planning) Plmn
 Radio Planning EutranExternalCell
0~255 None None
(Internal planning) Plmn

Radio Planning EutranExternalCell

000~999 None None
(Internal planning) Plmn
 Radio Planning EutranExternalCell
00~99,000~999 None None
(Internal planning) Plmn

Radio Planning GeranExternalCellP

0~65535 None None
(Internal planning) lmn

Radio Planning GeranExternalCellP

1~65533,65535 None None
(Internal planning) lmn

Radio Planning GeranExternalCellP

000~999 None None
(Internal planning) lmn
 Radio Planning GeranExternalCellP
00~99,000~999 None None
(Internal planning) lmn

Radio Planning GeranExternalCellP

000~999 None None
(Internal planning) lmn

Radio Planning GeranExternalCellP

00~99,000~999 None None
(Internal planning) lmn
 Radio Planning UtranExternalCellPl
000~999 None None
(Internal planning) mn

Radio Planning UtranExternalCellPl

00~99,000~999 None None
(Internal planning) mn
 Radio Planning UtranExternalCellPl
0~65535 None None
(Internal planning) mn
 Radio Planning UtranExternalCellPl
0~65535 None None
(Internal planning) mn

Radio Planning UtranExternalCellPl

000~999 None None
(Internal planning) mn
 Radio Planning UtranExternalCellPl
00~99,000~999 None None
(Internal planning) mn

Radio Planning Cdma2000HrpdExt

3~28 characters None None
(Internal planning) Cell
 Radio Planning Cdma2000HrpdExt
3~8 characters None None
(Internal planning) Cell

bc0, bc1, bc2, bc3,

bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
Radio Planning Cdma2000HrpdExt
bc11, bc12, bc13, None None
(Internal planning) Cell
bc14, bc15, bc16,
bc17, bc18, bc19,
bc20, bc21
 Radio Planning Cdma2000HrpdExt
0~2047 None None
(Internal planning) Cell

Radio Planning Cdma2000HrpdExt

000~999 None None
(Internal planning) Cell

Radio Planning Cdma2000HrpdExt

00~99,000~999 None None
(Internal planning) Cell
 Radio Planning Cdma2000HrpdExt
0~511 None None
(Internal planning) Cell

Cdma2000HrpdExt
0~99 characters NULL(empty string) None Engineering Design
Cell
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning Cdma2000HrpdExt
MANUAL_MODE Mode) Mode) (Internal planning) Cell

Radio Planning Cdma20001XrttExt

1~4095 None None
(Internal planning) Cell
 Radio Planning Cdma20001XrttExt
0~15 None None
(Internal planning) Cell

bc0, bc1, bc2, bc3,

bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
Radio Planning Cdma20001XrttExt
bc11, bc12, bc13, None None
(Internal planning) Cell
bc14, bc15, bc16,
bc17, bc18, bc19,
bc20, bc21

Radio Planning Cdma20001XrttExt

0~2047 None None
(Internal planning) Cell

Radio Planning Cdma20001XrttExt

0~32767 None None
(Internal planning) Cell
 Radio Planning Cdma20001XrttExt
0~65535 None None
(Internal planning) Cell

Radio Planning Cdma20001XrttExt

000~999 None None
(Internal planning) Cell
 Radio Planning Cdma20001XrttExt
00~99,000~999 None None
(Internal planning) Cell

Radio Planning Cdma20001XrttExt

0~8 characters NULL(empty string) None
(Internal planning) Cell
 Radio Planning Cdma20001XrttExt
0~511 None None
(Internal planning) Cell

Radio Planning Cdma20001XrttExt

0~99 characters NULL(empty string) None
(Internal planning) Cell

AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning Cdma20001XrttExt

MANUAL_MODE Mode) Mode) (Internal planning) Cell
 Radio Planning Cdma20001XrttNC
0~255 None None
(Internal planning) ell

Radio Planning Cdma20001XrttNC

1~4095 None None
(Internal planning) ell

Radio Planning Cdma20001XrttNC

0~15 None None
(Internal planning) ell

bc0, bc1, bc2, bc3,

bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
Radio Planning Cdma20001XrttNC
bc11, bc12, bc13, None None
(Internal planning) ell
bc14, bc15, bc16,
bc17, bc18, bc19,
bc20, bc21
 Radio Planning Cdma20001XrttNC
0~2047 None None
(Internal planning) ell

Radio Planning Cdma20001XrttNC

0~32767 None None
(Internal planning) ell

Radio Planning Cdma20001XrttNC

0~65535 None None
(Internal planning) ell

PERMIT_HO_ENU
M, PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning Cdma20001XrttNC
FORBID_HO_ENU M(Permit Ho) M(Permit Ho) (Internal planning) ell
M
PERMIT_RMV_EN
PERMIT_RMV_EN PERMIT_RMV_EN
UM, Radio Planning Cdma20001XrttNC
UM(Permit ANR UM(Permit ANR
FORBID_RMV_EN (Internal planning) ell
Remove) Remove)
UM

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Cdma20001XrttNC

Engineering Design
BOOLEAN_TRUE False) False) ell

Cdma20001XrttNC
0~99 characters NULL(empty string) None Engineering Design
ell
 Cdma20001XrttNC
0~99 characters NULL(empty string) None Engineering Design
ell
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning Cdma20001XrttNC
MANUAL_MODE Mode) Mode) (Internal planning) ell

Radio Planning Cdma2000BandCla

0~255 None None
(Internal planning) ss
bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
Radio Planning Cdma2000BandCla
bc11, bc12, bc13, None None
(Internal planning) ss
bc14, bc15, bc16,
bc17, bc18, bc19,
bc20, bc21

NOT_CFG(Not NOT_CFG(Not Radio Planning Cdma2000BandCla

NOT_CFG, CFG
configure) configure) (Internal planning) ss

Radio Planning Cdma2000BandCla

0~7 2 2
(Internal planning) ss
 Radio Planning Cdma2000BandCla
-31.5~0 -34 -34
(Internal planning) ss

Radio Planning Cdma2000BandCla

-31.5~0 -34 -34
(Internal planning) ss
 NOT_CFG(Not NOT_CFG(Not Radio Planning Cdma2000BandCla
NOT_CFG, CFG
configure) configure) (Internal planning) ss

Radio Planning Cdma2000BandCla

0~7 2 2
(Internal planning) ss

Radio Planning Cdma2000BandCla

-31.5~0 -26 -26
(Internal planning) ss
 Radio Planning Cdma2000BandCla
-31.5~0 -26 -26
(Internal planning) ss

Radio Planning
000~999 None None GeranExternalCell
(Internal planning)

Radio Planning
00~99,000~999 None None GeranExternalCell
(Internal planning)
 Radio Planning
0~65535 None None GeranExternalCell
(Internal planning)

Radio Planning
1~65533,65535 None None GeranExternalCell
(Internal planning)

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG GeranExternalCell
configure) configure) ded Value

Radio Planning
0~255 0 None GeranExternalCell
(Internal planning)
GSM_dcs1800, Radio Planning
None None GeranExternalCell
GSM_pcs1900 (Internal planning)

Radio Planning
0~1023 None None GeranExternalCell
(Internal planning)

Radio Planning
0~7 None None GeranExternalCell
(Internal planning)
 Radio Planning
0~7 None None GeranExternalCell
(Internal planning)

DTM_AVAILABLE,
DTM_NOT_AVAILA DTM_NOT_AVAILA Radio Planning
DTM_NOT_AVAILA GeranExternalCell
BLE BLE (Internal planning)
BLE
0~99 characters NULL(empty string) None Engineering Design GeranExternalCell

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Radio Planning

GeranExternalCell
BOOLEAN_TRUE False) False) (Internal planning)
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( Radio Planning
GeranExternalCell
BOOLEAN_TRUE True) True) (Internal planning)
 Default/Recommen
NO, YES NO(No) NO GeranExternalCell
ded Value
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning
GeranExternalCell
MANUAL_MODE Mode) Mode) (Internal planning)

Radio Planning
0~255 None None GeranNcell
(Internal planning)
 Radio Planning
000~999 None None GeranNcell
(Internal planning)

Radio Planning
00~99,000~999 None None GeranNcell
(Internal planning)

Radio Planning
1~65533,65535 None None GeranNcell
(Internal planning)

Radio Planning
0~65535 None None GeranNcell
(Internal planning)
PERMIT_RMV_EN
PERMIT_RMV_EN PERMIT_RMV_EN
UM,
UM(Permit ANR UM(Permit ANR Engineering Design GeranNcell
FORBID_RMV_EN
Remove) Remove)
UM

PERMIT_HO_ENU
M, PERMIT_HO_ENU PERMIT_HO_ENU
Engineering Design GeranNcell
FORBID_HO_ENU M(Permit Ho) M(Permit Ho)
M

0~32 0 0 Engineering Design GeranNcell

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen

GeranNcell
BOOLEAN_TRUE False) False) ded Value
0~99 characters NULL(empty string) None Engineering Design GeranNcell

0~99 characters NULL(empty string) None Engineering Design GeranNcell

 Default/Recommen
NO, YES NO(NO) NO(NO) GeranNcell
ded Value

Default/Recommen
0~64 0 0 GeranNcell
ded Value
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning
GeranNcell
MANUAL_MODE Mode) Mode) (Internal planning)

0~1048575 None None N/A GeranNcell

0~32 characters None None N/A GeranNcell

0~32 characters None None N/A GeranNcell

 Radio Planning
0~255 None None GeranNfreqGroup
(Internal planning)

Radio Planning
0~31 None None GeranNfreqGroup
(Internal planning)

GSM, GPRS, Radio Planning

None None GeranNfreqGroup
EDGE (Internal planning)

Radio Planning
0~1023 None None GeranNfreqGroup
(Internal planning)
GSM_dcs1800, Radio Planning
None None GeranNfreqGroup
GSM_pcs1900 (Internal planning)

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design GeranNfreqGroup
configure) configure)
0~7 1 1 Engineering Design GeranNfreqGroup

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG GeranNfreqGroup
configure) configure) ded Value
0~39 0 None Engineering Design GeranNfreqGroup

Default/Recommen
-115~-25 0 0 GeranNfreqGroup
ded Value
 Default/Recommen
0~62 7 7 GeranNfreqGroup
ded Value
 Default/Recommen
0~62 7 7 GeranNfreqGroup
ded Value

Default/Recommen
-15~15 0 0 GeranNfreqGroup
ded Value
 Default/Recommen
0~255 255 255 GeranNfreqGroup
ded Value

0~8 0 0 Engineering Design GeranNfreqGroup

 NON_CONTINUOU NON_CONTINUOU
NON_CONTINUOU Default/Recommen
S(NON_CONTINU S(NON_CONTINU GeranNfreqGroup
S, CONTINUOUS ded Value
OUS) OUS)
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( Default/Recommen
GeranNfreqGroup
BOOLEAN_TRUE True) True) ded Value

NOT_ALLOWED, ALLOWED(ALLOW ALLOWED(ALLOW Radio Planning

GeranNfreqGroup
ALLOWED ED) ED) (Internal planning)
 Radio Planning
0~31 0 0 GeranNfreqGroup
(Internal planning)

Radio Planning GeranNfreqGroupA

0~255 None None
(Internal planning) rfcn

Radio Planning GeranNfreqGroupA

0~31 None None
(Internal planning) rfcn
 Radio Planning GeranNfreqGroupA
0~1023 None None
(Internal planning) rfcn

0~255 None None Engineering Design IntraFreqBlkCell

0~503 None None Engineering Design IntraFreqBlkCell

0~99 characters NULL(empty string) None Engineering Design IntraFreqBlkCell

n1, n4, n8, n12,

n16, n24, n32, n48,
n64, n84, n96, n1(n1) None Engineering Design IntraFreqBlkCell
n128, n168, n252,
n504
 Radio Planning EutranIntraFreqNC
0~255 None None
(Internal planning) ell

Radio Planning EutranIntraFreqNC

000~999 None None
(Internal planning) ell

Radio Planning EutranIntraFreqNC

00~99,000~999 None None
(Internal planning) ell
 Radio Planning EutranIntraFreqNC
0~1048575 None None
(Internal planning) ell

Radio Planning EutranIntraFreqNC

0~255 None None
(Internal planning) ell
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
Default/Recommen EutranIntraFreqNC
dB-1, dB0, dB1, dB0(0dB) dB0(0dB)
ded Value ell
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24

dB-24, dB-22, dB-

20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
Default/Recommen EutranIntraFreqNC
dB-1, dB0, dB1, dB0(0dB) dB0(0dB)
ded Value ell
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24
PERMIT_HO_ENU
M, PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning EutranIntraFreqNC
FORBID_HO_ENU M(Permit Ho) M(Permit Ho) (Internal planning) ell
M

PERMIT_RMV_EN
PERMIT_RMV_EN PERMIT_RMV_EN
UM, Radio Planning EutranIntraFreqNC
UM(Permit ANR UM(Permit ANR
FORBID_RMV_EN (Internal planning) ell
Remove) Remove)
UM

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen EutranIntraFreqNC

BOOLEAN_TRUE False) False) ded Value ell

EutranIntraFreqNC
0~99 characters NULL(empty string) None Engineering Design
ell
 EutranIntraFreqNC
0~99 characters NULL(empty string) None Engineering Design
ell
LOW_PRIORITY, LOW_PRIORITY(L LOW_PRIORITY(L Default/Recommen EutranIntraFreqNC
HIGH_PRIORITY ow Priority) ow Priority) ded Value ell
 Default/Recommen EutranIntraFreqNC
0~15 0 0
ded Value ell

FORMAL, FORMAL(FORMAL Radio Planning EutranIntraFreqNC

None
EXTENDED ) (Internal planning) ell
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning EutranIntraFreqNC
MANUAL_MODE Mode) Mode) (Internal planning) ell

Radio Planning EutranIntraFreqNC

0~503 None None
(Internal planning) ell
0~46589,54436~65 Radio Planning EutranIntraFreqNC
None None
535 (Internal planning) ell

Radio Planning EutranIntraFreqNC

OFF, ON OFF(Off) OFF(Off)
(Internal planning) ell
 Radio Planning
0~255 None None EutranInterNFreq
(Internal planning)

0~46589,54436~65 Radio Planning

None None EutranInterNFreq
535 (Internal planning)

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG EutranInterNFreq
configure) configure) ded Value
18000~46589,5443 Radio Planning
18000 None EutranInterNFreq
6~65535 (Internal planning)

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG EutranInterNFreq
configure) configure) ded Value
 Radio Planning
0~7 1 1 EutranInterNFreq
(Internal planning)
 Default/Recommen
0~7 1 1 EutranInterNFreq
ded Value

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG EutranInterNFreq
configure) configure) ded Value
0DOT25_ENUM,
0DOT5_ENUM,
1DOT0_ENUM(1.0) None Engineering Design EutranInterNFreq
0DOT75_ENUM,
1DOT0_ENUM

0DOT25_ENUM,
0DOT5_ENUM, 0DOT75_ENUM(0.
None Engineering Design EutranInterNFreq
0DOT75_ENUM, 75)
1DOT0_ENUM
MBW6, MBW15,
MBW25, MBW50, None None Engineering Design EutranInterNFreq
MBW75, MBW100

dB-24, dB-22, dB-

20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
Default/Recommen
dB-1, dB0, dB1, dB0(0dB) dB0(0dB) EutranInterNFreq
ded Value
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24
 Default/Recommen
0~62 11 11 EutranInterNFreq
ded Value

Default/Recommen
0~62 11 11 EutranInterNFreq
ded Value
 Default/Recommen
-140~-44 -64 -64 EutranInterNFreq
ded Value

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG EutranInterNFreq
configure) configure) ded Value
 Default/Recommen
-30~33 23 23 EutranInterNFreq
ded Value

BitString00,
BitString01, Default/Recommen
BitString01(01) BitString01(01) EutranInterNFreq
BitString10, ded Value
BitString11
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen
EutranInterNFreq
BOOLEAN_TRUE False) False) ded Value

If the neighboring
E-UTRAN
frequency and the
serving frequency
are in the same
frequency band, the
value EventA3 is
EventA3, EventA4, recommended.
EventA4(EventA4) Engineering Design EutranInterNFreq
EventA5 If the neighboring
E-UTRAN
frequency and the
serving frequency
are in different
frequency bands,
the value EventA4
is recommended.
 Radio Planning
0~31 0 0 EutranInterNFreq
(Internal planning)
 Radio Planning
0~31 0 0 EutranInterNFreq
(Internal planning)

NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Engineering Design EutranInterNFreq
configure) configure)
 Radio Planning
-34~-3 -18 -18 EutranInterNFreq
(Internal planning)

Radio Planning
0~8 0 0 EutranInterNFreq
(Internal planning)
NOT_ALLOWED, ALLOWED(ALLOW ALLOWED(ALLOW Default/Recommen
EutranInterNFreq
ALLOWED ED) ED) ded Value

Radio Planning
DISABLE, ENABLE DISABLE(Disable) DISABLE(Disable) EutranInterNFreq
(Internal planning)
 You are advised to
set this parameter
based on the
frequency
coverage,
frequency
bandwidth, and UE
capability. For
example, if the
network has two
frequencies (F1 and Radio Planning
0~100 0 EutranInterNFreq
F2) with the same (Internal planning)
coverage and in the
same bandwidth,
and all UEs in the
network support
both frequencies, it
is recommended
that the proportions
for load balancing
of F1 and F2 are
both set to 50%.

Radio Planning
0~7 7 7 EutranInterNFreq
(Internal planning)
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
Default/Recommen
dB-1, dB0, dB1, dB0(0dB) dB0(0dB) EutranInterNFreq
ded Value
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24

Radio Planning
0~8 0 None EutranInterNFreq
(Internal planning)
 Radio Planning
-20~20 0 None EutranInterNFreq
(Internal planning)
 Default/Recommen
-20~20 0 0 EutranInterNFreq
ded Value
 Default/Recommen
FALSE, TRUE FALSE(False) None EutranInterNFreq
ded Value
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( Default/Recommen
EutranInterNFreq
BOOLEAN_TRUE True) True) ded Value

LOW_SPEED,
HIGH_SPEED,
LOW_SPEED(Low
ULTRA_HIGH_SPE Radio Planning
speed Inter- None EutranInterNFreq
ED, (Internal planning)
frequency)
EXTRA_HIGH_SPE
ED
NOT_ALLOWED, ALLOWED(ALLOW ALLOWED(ALLOW Radio Planning
EutranInterNFreq
ALLOWED ED) ED) (Internal planning)

Radio Planning
0~8 1 1 EutranInterNFreq
(Internal planning)
0~8 1 1 Engineering Design EutranInterNFreq

NOT_ALLOWED, ALLOWED(ALLOW ALLOWED(ALLOW Radio Planning

EutranInterNFreq
ALLOWED ED) ED) (Internal planning)
 Radio Planning
0~31 0 0 EutranInterNFreq
(Internal planning)

NOT_ALLOWED, NOT_ALLOWED(N Default/Recommen

NOT_ALLOWED EutranInterNFreq
ALLOWED OT_ALLOWED) ded Value
EventA4, EventA5, Default/Recommen
EventA4(EventA4) None. EutranInterNFreq
EventA3 ded Value

SpeedMobilityTarge SpeedMobilityTarge Default/Recommen

NONE EutranInterNFreq
tInd tInd:Off ded Value
 Radio Planning
0.01~100, step:0.01 100 100 EutranInterNFreq
(Internal planning)

NOT_ALLOWED, NOT_ALLOWED(N NOT_ALLOWED(N Radio Planning

EutranInterNFreq
ALLOWED OT_ALLOWED) OT ALLOWED) (Internal planning)
 Radio Planning
0~7 7 7 EutranInterNFreq
(Internal planning)

Default/Recommen
-15~15 -2 -2 EutranInterNFreq
ded Value
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning
EutranInterNFreq
MANUAL_MODE Mode) Mode) (Internal planning)

0~255 None None Engineering Design InterFreqBlkCell

0~46589,54436~65
None None Engineering Design InterFreqBlkCell
535

0~503 None None Engineering Design InterFreqBlkCell

0~99 characters NULL(empty string) None Engineering Design InterFreqBlkCell

n1, n4, n8, n12,

n16, n24, n32, n48,
n64, n84, n96, n1(n1) None Engineering Design InterFreqBlkCell
n128, n168, n252,
n504
 Radio Planning EutranInterFreqNC
0~255 None None
(Internal planning) ell

Radio Planning EutranInterFreqNC

000~999 None None
(Internal planning) ell

Radio Planning EutranInterFreqNC

00~99,000~999 None None
(Internal planning) ell
 Radio Planning EutranInterFreqNC
0~1048575 None None
(Internal planning) ell

Radio Planning EutranInterFreqNC

0~255 None None
(Internal planning) ell
dB-24, dB-22, dB-
20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
Default/Recommen EutranInterFreqNC
dB-1, dB0, dB1, dB0(0dB) dB0(0dB)
ded Value ell
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24

dB-24, dB-22, dB-

20, dB-18, dB-16,
dB-14, dB-12, dB-
10, dB-8, dB-6, dB-
5, dB-4, dB-3, dB-2,
Default/Recommen EutranInterFreqNC
dB-1, dB0, dB1, dB0(0dB) dB0(0dB)
ded Value ell
dB2, dB3, dB4,
dB5, dB6, dB8,
dB10, dB12, dB14,
dB16, dB18, dB20,
dB22, dB24
PERMIT_HO_ENU
M, PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning EutranInterFreqNC
FORBID_HO_ENU M(Permit Ho) M(Permit Ho) (Internal planning) ell
M

PERMIT_RMV_EN
PERMIT_RMV_EN PERMIT_RMV_EN
UM, Radio Planning EutranInterFreqNC
UM(Permit ANR UM(Permit ANR
FORBID_RMV_EN (Internal planning) ell
Remove) Remove)
UM

Radio Planning EutranInterFreqNC

0~32 0 0
(Internal planning) ell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen EutranInterFreqNC
BOOLEAN_TRUE False) False) ded Value ell

EutranInterFreqNC
0~99 characters NULL(empty string) None Engineering Design
ell

EutranInterFreqNC
0~99 characters NULL(empty string) None Engineering Design
ell
LOW_PRIORITY, LOW_PRIORITY(L LOW_PRIORITY(L Default/Recommen EutranInterFreqNC
HIGH_PRIORITY ow Priority) ow Priority) ded Value ell
 Radio Planning EutranInterFreqNC
NO, YES NO(NO) NO(NO)
(Internal planning) ell

NULL, SAME, BIG, Radio Planning EutranInterFreqNC

NULL(NULL) NULL(NULL)
SMALL (Internal planning) ell
FORMAL, FORMAL(FORMAL Radio Planning EutranInterFreqNC
None
EXTENDED ) (Internal planning) ell

AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning EutranInterFreqNC

MANUAL_MODE Mode) Mode) (Internal planning) ell
 Radio Planning EutranInterFreqNC
0~503 None None
(Internal planning) ell

0~46589,54436~65 Radio Planning EutranInterFreqNC

None None
535 (Internal planning) ell

Radio Planning
000~999 None None EutranExternalCell
(Internal planning)
 Radio Planning
00~99,000~999 None None EutranExternalCell
(Internal planning)

Radio Planning
0~1048575 None None EutranExternalCell
(Internal planning)
 Radio Planning
0~255 None None EutranExternalCell
(Internal planning)

0~46589,54436~65 Radio Planning

None None EutranExternalCell
535 (Internal planning)

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG EutranExternalCell
configure) configure) ded Value
18000~46589,5443 Radio Planning
18000 None EutranExternalCell
6~65535 (Internal planning)

Radio Planning
0~503 None None EutranExternalCell
(Internal planning)

Radio Planning
0~65535 None None EutranExternalCell
(Internal planning)
0~99 characters NULL(empty string) None Engineering Design EutranExternalCell
 Radio Planning
0~2 None None EutranExternalCell
(Internal planning)

Radio Planning
1~64 None None EutranExternalCell
(Internal planning)
 Default/Recommen
NO, YES NO(No) NO EutranExternalCell
ded Value
NONE, Default/Recommen
NONE(NONE) NONE EutranExternalCell
SPECSERCELL ded Value
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning
EutranExternalCell
MANUAL_MODE Mode) Mode) (Internal planning)

Radio Planning Cdma2000BcSCell

0~255 None None
(Internal planning) Op
bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7,
bc8, bc9, bc10,
Radio Planning Cdma2000BcSCell
bc11, bc12, bc13, None None
(Internal planning) Op
bc14, bc15, bc16,
bc17, bc18, bc19,
bc20, bc21

Radio Planning Cdma2000BcSCell

0~5 None None
(Internal planning) Op

NOT_CFG(Not NOT_CFG(Not Radio Planning Cdma2000BcSCell

NOT_CFG, CFG
configure) configure) (Internal planning) Op
 Radio Planning Cdma2000BcSCell
0~7 0 0
(Internal planning) Op

NOT_CFG(Not NOT_CFG(Not Radio Planning Cdma2000BcSCell

NOT_CFG, CFG
configure) configure) (Internal planning) Op
 Radio Planning Cdma2000BcSCell
0~7 0 0
(Internal planning) Op

Radio Planning EutranNFreqRanSh

0~255 None None
(Internal planning) are
0~46589,54436~65 Radio Planning EutranNFreqRanSh
None None
535 (Internal planning) are

Radio Planning EutranNFreqRanSh

000~999 None None
(Internal planning) are

Radio Planning EutranNFreqRanSh

00~99,000~999 None None
(Internal planning) are
 NOT_CFG(Not NOT_CFG(Not Radio Planning EutranNFreqRanSh
NOT_CFG, CFG
configure) configure) (Internal planning) are

Radio Planning EutranNFreqRanSh

0~7 0 0
(Internal planning) are

Radio Planning EutranNFreqSCellO

0~255 None None
(Internal planning) p
0~46589,54436~65 Radio Planning EutranNFreqSCellO
None None
535 (Internal planning) p

Radio Planning EutranNFreqSCellO

0~5 None None
(Internal planning) p

NOT_CFG(Not NOT_CFG(Not Default/Recommen EutranNFreqSCellO

NOT_CFG, CFG
configure) configure) ded Value p
 Radio Planning EutranNFreqSCellO
0~7 0 0
(Internal planning) p

Radio Planning GeranNFGroupSCe

0~255 None None
(Internal planning) llOp
 Radio Planning GeranNFGroupSCe
0~31 None None
(Internal planning) llOp

Radio Planning GeranNFGroupSCe

0~5 None None
(Internal planning) llOp

NOT_CFG(Not NOT_CFG(Not Radio Planning GeranNFGroupSCe

NOT_CFG, CFG
configure) configure) (Internal planning) llOp
 Radio Planning GeranNFGroupSCe
0~7 0 0
(Internal planning) llOp

Radio Planning
0~255 None None GeranRanShare
(Internal planning)

Radio Planning
0~31 None None GeranRanShare
(Internal planning)
 Radio Planning
000~999 None None GeranRanShare
(Internal planning)

Radio Planning
00~99,000~999 None None GeranRanShare
(Internal planning)

NOT_CFG(Not NOT_CFG(Not Radio Planning

NOT_CFG, CFG GeranRanShare
configure) configure) (Internal planning)
 Radio Planning
0~7 0 0 GeranRanShare
(Internal planning)

Radio Planning
0~255 None None UtranNCell
(Internal planning)
 Radio Planning
000~999 None None (Negotiation with UtranNCell
the peer)

Radio Planning
00~99,000~999 None None UtranNCell
(Internal planning)
 Radio Planning
0~65535 None None UtranNCell
(Internal planning)
 Radio Planning
0~65535 None None UtranNCell
(Internal planning)

PERMIT_HO_ENU
M, PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning
UtranNCell
FORBID_HO_ENU M(Permit Ho) M(Permit Ho) (Internal planning)
M

PERMIT_RMV_EN
PERMIT_RMV_EN PERMIT_RMV_EN
UM, Radio Planning
UM(Permit ANR UM(Permit ANR UtranNCell
FORBID_RMV_EN (Internal planning)
Remove) Remove)
UM

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen

UtranNCell
BOOLEAN_TRUE False) False) ded Value
 Radio Planning
0~32 0 0 UtranNCell
(Internal planning)

LOW_PRIORITY, LOW_PRIORITY(L LOW_PRIORITY(L Default/Recommen

UtranNCell
HIGH_PRIORITY ow Priority) ow Priority) ded Value
 Default/Recommen
NO, YES NO(NO) NO(NO) UtranNCell
ded Value
 Default/Recommen
0~128 0 0 UtranNCell
ded Value
0~99 characters NULL(empty string) None Engineering Design UtranNCell

0~99 characters NULL(empty string) None Engineering Design UtranNCell

AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning
UtranNCell
MANUAL_MODE Mode) Mode) (Internal planning)

0~1048575 None None N/A UtranNCell

0~32 characters None None N/A UtranNCell

0~32 characters None None N/A UtranNCell

0~32 None None N/A UtranNCell

0~32 None None N/A UtranNCell

Normal, Overload,
Congestion, None None N/A UtranNCell
Midload

Radio Planning
0~255 None None UtranNFreqSCellOp
(Internal planning)

Radio Planning
0~16383 None None UtranNFreqSCellOp
(Internal planning)
 Radio Planning
0~5 None None UtranNFreqSCellOp
(Internal planning)

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG UtranNFreqSCellOp
configure) configure) ded Value

Radio Planning
0~7 0 0 UtranNFreqSCellOp
(Internal planning)
 Radio Planning
0~255 None None UtranRanShare
(Internal planning)

Radio Planning
0~16383 None None UtranRanShare
(Internal planning)
 Radio Planning
000~999 None None UtranRanShare
(Internal planning)

Radio Planning
00~99,000~999 None None UtranRanShare
(Internal planning)

NOT_CFG(Not NOT_CFG(Not Radio Planning

NOT_CFG, CFG UtranRanShare
configure) configure) (Internal planning)
 Radio Planning
0~7 0 0 UtranRanShare
(Internal planning)

Radio Planning
0~255 None None UtranNFreq
(Internal planning)
 Radio Planning
0~16383 None None UtranNFreq
(Internal planning)

R99, HSDPA,
HSUPA HSUPA Engineering Design UtranNFreq
HSUPA, HSPA

UTRAN_FDD, Radio Planning

UTRAN_FDD UTRAN_FDD UtranNFreq
UTRAN_TDD (Internal planning)
 NOT_CFG(Not NOT_CFG(Not Default/Recommen
NOT_CFG, CFG UtranNFreq
configure) configure) ded Value
 Radio Planning
0~16383 0 None UtranNFreq
(Internal planning)

NOT_CFG(Not NOT_CFG(Not Default/Recommen

NOT_CFG, CFG UtranNFreq
configure) configure) ded Value
 Radio Planning
0~7 1 1 UtranNFreq
(Internal planning)

Default/Recommen
-50~33 24 24 UtranNFreq
ded Value
 Default/Recommen
-15~15 0 0 UtranNFreq
ded Value

Default/Recommen
-24~0 -22 -22 UtranNFreq
ded Value
 Default/Recommen
-119~-25 -58 -58 UtranNFreq
ded Value
 Default/Recommen
0~62 6 6 UtranNFreq
ded Value
 Default/Recommen
0~62 6 6 UtranNFreq
ded Value
 Default/Recommen
0~31 0 0 UtranNFreq
ded Value
 Default/Recommen
0~31 0 0 UtranNFreq
ded Value
Priority_0,
Priority_1,
Priority_2,
Priority_3,
Priority_4,
Priority_5,
Priority_6,
Priority_7,
Priority_8, Priority_2(Priority 2) Priority_2(Priority 2) Engineering Design UtranNFreq
Priority_9,
Priority_10,
Priority_11,
Priority_12,
Priority_13,
Priority_14,
Priority_15,
Priority_16
Priority_0,
Priority_1,
Priority_2,
Priority_3,
Priority_4,
Priority_5,
Priority_6,
Priority_7,
Priority_8, Priority_2(Priority 2) Priority_2(Priority 2) Engineering Design UtranNFreq
Priority_9,
Priority_10,
Priority_11,
Priority_12,
Priority_13,
Priority_14,
Priority_15,
Priority_16
 Radio Planning
0~8 0 0 UtranNFreq
(Internal planning)
Priority_0,
Priority_1,
Priority_2,
Priority_3,
Priority_4,
Priority_5,
Priority_6,
Priority_7,
Radio Planning
Priority_8, Priority_2(Priority 2) Priority_2(Priority 2) UtranNFreq
(Internal planning)
Priority_9,
Priority_10,
Priority_11,
Priority_12,
Priority_13,
Priority_14,
Priority_15,
Priority_16
 NON_CONTINUOU NON_CONTINUOU
NON_CONTINUOU Default/Recommen
S(NON_CONTINU S(NON_CONTINU UtranNFreq
S, CONTINUOUS ded Value
OUS) OUS)

Radio Planning
0~7 0 7 UtranNFreq
(Internal planning)
 Default/Recommen
FALSE, TRUE FALSE(False) None UtranNFreq
ded Value
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( Default/Recommen
UtranNFreq
BOOLEAN_TRUE True) True) ded Value

NOT_ALLOWED, ALLOWED(ALLOW ALLOWED(ALLOW Radio Planning

UtranNFreq
ALLOWED ED) ED) (Internal planning)
Priority_0,
Priority_1,
Priority_2,
Priority_3,
Priority_4,
Priority_5,
Priority_6,
Priority_7,
Priority_8, Priority_2(Priority 2) Priority_2(Priority 2) Engineering Design UtranNFreq
Priority_9,
Priority_10,
Priority_11,
Priority_12,
Priority_13,
Priority_14,
Priority_15,
Priority_16

BOOLEAN_FALSE, BOOLEAN_FALSE( Default/Recommen

0 UtranNFreq
BOOLEAN_TRUE False) ded Value
 Radio Planning
0~31 0 0 UtranNFreq
(Internal planning)

Radio Planning
000~999 None None UtranExternalCell
(Internal planning)
 Radio Planning
00~99,000~999 None None UtranExternalCell
(Internal planning)

Radio Planning
0~65535 None None UtranExternalCell
(Internal planning)
 Radio Planning
0~65535 None None UtranExternalCell
(Internal planning)
 Radio Planning
0~16383 None None UtranExternalCell
(Internal planning)
 NOT_CFG(Not NOT_CFG(Not Default/Recommen
NOT_CFG, CFG UtranExternalCell
configure) configure) ded Value
 Radio Planning
0~16383 0 None UtranExternalCell
(Internal planning)

UTRAN_FDD,
UTRAN_FDD UTRAN_FDD Engineering Design UtranExternalCell
UTRAN_TDD
 NOT_CFG(Not NOT_CFG(Not Default/Recommen
NOT_CFG, CFG UtranExternalCell
configure) configure) ded Value

Radio Planning
0~255 0 None UtranExternalCell
(Internal planning)

Radio Planning
0~511 None None UtranExternalCell
(Internal planning)

Radio Planning
1~65533,65535 None None UtranExternalCell
(Internal planning)
0~99 characters NULL(empty string) None Engineering Design UtranExternalCell

BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen

UtranExternalCell
BOOLEAN_TRUE False) False) ded Value
 Radio Planning
0~2 None None UtranExternalCell
(Internal planning)

Radio Planning
1~64 None None UtranExternalCell
(Internal planning)
 Default/Recommen
NO, YES NO(No) NO UtranExternalCell
ded Value
AUTO_MODE, AUTO_MODE(Auto AUTO_MODE(Auto Radio Planning
UtranExternalCell
MANUAL_MODE Mode) Mode) (Internal planning)

0~5 None None N/A BbpCollaborateGrp

0~23 None None N/A BbpCollaborateGrp
LOAD_BALANCE_
MODE_UNAVAILA
BLE,
LOAD_BALANCE_
MODE_OPEN, None None N/A BbpCollaborateGrp
LOAD_BALANCE_
MODE_CLOSED,
LOAD_BALANCE_
MODE_BLOCKED
BBP_CATEGORY_
NOT_SUPPORTED
,
BBP_STATUS_AB
NORMAL,
WORK_MODE_NO
T_SUPPORTED,
None None N/A BbpCollaborateGrp
SWITCH_OFF,
INTER_BOARD_D
ATA_LINK_EXCEP
TION,
BBP_STATUS_BLO
CKED, NULL,
UNKNOWN
NULL,
PRIMARY_BBP_W
ORK_TYPE, None None N/A BbpCollaborateGrp
SECONDARY_BBP
_WORK_TYPE

0~7 None None N/A BbpCollaborateGrp

0~1 None None N/A BbpCollaborateGrp

0~5 None None N/A BbpCollaborateGrp

 Default/Recommen
1~1440 60 60 BbpCollaborateGrp
ded Value
 Radio Planning
0~100 0 None BbpCollaborateGrp
(Internal planning)
 Radio Planning
0~100 0 None BbpCollaborateGrp
(Internal planning)
UNBLOCK,
HIGH_PRIORITY_
BLOCK,
UNBLOCK(Unblock
MIDDLE_PRIORIT None Engineering Design BbpCollaborateGrp
)
Y_BLOCK,
LOW_PRIORITY_B
LOCK

Equipment
0~4320 1080 1080 eNodeBAlmCfg
Planning
 Radio Planning
S1, X2 S1:Off, X2:Off S1:Off,X2:Off eNodeBAlmCfg
(Internal planning)
0~261120,275943~ ENodeBFrameOffs
0 None Engineering Design
307200 et

0~261120,275943~ ENodeBFrameOffs
0 None Engineering Design
307200 et
 OFF(OFF)
When the
BbResExclusiveSwi
tch parameter is set
to ON(On),
baseband
processing units
cannot be shared
among cells if the
baseband
resources and cells Radio Planning eNodeBResModeAl
OFF, ON OFF(OFF)
are automatically (Internal planning) go
bound. Therefore, if
the
BbpResAutoConfig
Sw parameter is set
to ON(ON), it is
recommended that
the
BbResExclusiveSwi
tch parameter be
set to OFF(Off).
ADAPTIVE,
RESOURCE_PRIM ADAPTIVE(ADAPTI ADAPTIVE(ADAPTI Radio Planning eNodeBResModeAl
ARY, VE) VE) (Internal planning) go
LOAD_BALANCE
ADAPTIVE,
RESOURCE_PRIM ADAPTIVE(ADAPTI ADAPTIVE(ADAPTI Radio Planning eNodeBResModeAl
ARY, VE) VE) (Internal planning) go
LOAD_BALANCE

Radio Planning eNodeBResModeAl

0~65535 10 10
(Internal planning) go
 Radio Planning
00:00:00~23:59:59 2:00:00 2:00:00 eNodeBSonDBCfg
(Internal planning)

Default/Recommen
0~23,255 255 None EuCoSchCfg
ded Value
COORDINATED_S
COORDINATED_S
CHEDULING_ONLY
CHEDULING_ONL Transport
,
Y(COORDINATED_ None Planning(Internal EuCoSchCfg
COORDINATED_S
SCHEDULING_ON planning)
CHEDULING_MIXI
LY)
NG

Equipment EuCoSchDLCoMP
3~20 6 6
Planning Cfg
 Equipment EuCoSchDLCoMP
OFF, ON OFF(Off) OFF(Off)
Planning Cfg

Equipment EuCoSchDLCoMP
1~25 1 1
Planning Cfg

FIX_MODE, FIX_MODE(Fixed FIX_MODE(Fixed Equipment EuCoSchDLCoMP

ADP_MODE Mode) Mode) Planning Cfg
 Equipment
OFF, ON OFF(Off) OFF(off) EuUlCoSchCfg
Planning
NORMAL,
NORMAL(Normal NORMAL(Normal
LBBP_LARGE_CA N/A FddResMode
Mode) Mode)
PACITY
NORMAL,
NORMAL(NORMAL NORMAL(NORMAL Default/Recommen
LARGECAPABILIT FddResMode
) ) ded Value
Y
 Set this parameter
to ON(On) in the
following scenario:
Only some cells Default/Recommen
OFF, ON OFF(Off) FddResMode
served by the ded Value
eNodeB are bound
to the baseband
equipment.

Default/Recommen
0~65535 None None LIOptAtomRule
ded Value

Default/Recommen
Cell, eNodeB Cell(Cell) None LIOptAtomRule
ded Value
BIGGERTHAN,
EQUALTO,
SMALLERTHAN,
SMALLERTHANOR BIGGERTHAN(BIG Default/Recommen
None LIOptAtomRule
EQUALTO, GERTHAN) ded Value
BIGGERTHANORE
QUALTO,
NOTEQUALTO

-
Default/Recommen
2147483647~2147 0 None LIOptAtomRule
ded Value
483647
USER_SPEC_OCC
UPY_RATE,
UL_PRB_UTILIZAT
ION_RATE,
USER_SPEC_OCC
DL_PRB_UTILIZAT
UPY_RATE(USER_ Default/Recommen
ION_RATE, None LIOptAtomRule
SPEC_OCCUPY_R ded Value
PDCCH_CCE_UTIL
ATE)
IZATION_RATE,
ENB_USER_SPEC
_EQU_OCCUPY_R
ATE

Default/Recommen
0~65535 None None LIOptFeature
ded Value

Default/Recommen
0~64 NULL(empty string) None LIOptFeature
ded Value

Default/Recommen
0~65535 None None LIOptFunction
ded Value
 Default/Recommen
0~64 NULL(empty string) None LIOptFunction
ded Value

Default/Recommen
0~65535 1 None LIOptFunction
ded Value

Default/Recommen
Cell, eNodeB Cell(Cell) None LIOptFunction
ded Value
0~255 None None N/A LIOptFunction

NORMAL,
None None N/A LIOptFunction
PENALTY

0~65535 None None N/A LIOptRule

0~255 None None N/A LIOptRule

Default/Recommen
MODIFY, RESUME MODIFY(MODIFY) None LIOptRule
ded Value
 Default/Recommen
AND, OR AND(AND) None LIOptRule
ded Value

Default/Recommen
0~65535 300 None LIOptRule
ded Value

Default/Recommen
1~500 NULL(empty string) None LIOptRule
ded Value
 Default/Recommen
0~65535 1 None LIOptRule
ded Value

Default/Recommen
0~65535 300 None LIOptRule
ded Value
 Default/Recommen
BOTH, FDD, TDD BOTH(BOTH) None LIOptRule
ded Value

ACTIVATED, ACTIVATED(ACTIV Default/Recommen

None LIOptRule
DEACTIVATED ATED) ded Value
UN-EXECUTED,
EXECUTING, None None N/A LIOptRule
EXECUTED

Default/Recommen
0~65535 None None LIOptRuleMember
ded Value

Default/Recommen
0~65535 None None LIOptRuleMember
ded Value
ACTIVATED, ACTIVATED(ACTIV Default/Recommen
None LIOptRuleMember
DEACTIVATED ATED) ded Value

Radio Planning
000~999 None None NCellPlmnList
(Internal planning)

Radio Planning
00~99,000~999 None None NCellPlmnList
(Internal planning)

EUTRAN, UTRAN,
None None N/A NCellPlmnList
GERAN
BLACK_LIST,
BLACK_LIST(BLAC
GREY_LIST, None N/A NCellPlmnList
K_LIST)
WHITE_LIST

0~46589,54436~65 Radio Planning

None None PccFreqCfg
535 (Internal planning)
 Radio Planning
0~7 0 None PccFreqCfg
(Internal planning)

Radio Planning
-140~-43 -105 None PccFreqCfg
(Internal planning)
 Radio Planning
-20~-3 -20 None PccFreqCfg
(Internal planning)

Radio Planning
0~35 None None PIMCellGroup
(Internal planning)

Radio Planning
0~255 None None PIMCellGroup
(Internal planning)

Radio Planning
0~255 None None PIMCellGroup
(Internal planning)
 Radio Planning
0~65535 None None PIMCellGroup
(Internal planning)

Radio Planning
0~65535 None None PIMCellGroup
(Internal planning)

Radio Planning
DISABLE, ENABLE None None PIMCellGroup
(Internal planning)

Radio Planning
DISABLE, ENABLE None None PIMCellGroup
(Internal planning)

0~46589,54436~65 Radio Planning

None None SccFreqCfg
535 (Internal planning)
0~46589,54436~65 Radio Planning
None None SccFreqCfg
535 (Internal planning)

Radio Planning
1~7 1 None SccFreqCfg
(Internal planning)

Radio Planning
-31~66 0 None SccFreqCfg
(Internal planning)
 Radio Planning
-35~62 0 None SccFreqCfg
(Internal planning)

Default/Recommen
0~100 75 75 SccFreqCfg
ded Value
 Default/Recommen
0~100 50 50 SccFreqCfg
ded Value
 Default/Recommen
AUTO, MANUAL AUTO(Auto) AUTO(Auto) SccFreqCfg
ded Value

Radio Planning
0~255,65535 65535 65535 SccFreqCfg
(Internal planning)
 Default/Recommen
0~1, step:0.01 10 10 ServiceDiffSetting
ded Value

Default/Recommen
0~1, step:0.01 5 5 ServiceDiffSetting
ded Value

Default/Recommen
0~1, step:0.01 5 5 ServiceDiffSetting
ded Value

Default/Recommen
0~1, step:0.01 10 10 ServiceDiffSetting
ded Value

Default/Recommen
0~1, step:0.01 10 10 ServiceDiffSetting
ded Value

Default/Recommen
0~1, step:0.01 20 20 ServiceDiffSetting
ded Value

Default/Recommen
0~1, step:0.01 20 20 ServiceDiffSetting
ded Value

Default/Recommen
0~1, step:0.01 20 20 ServiceDiffSetting
ded Value
0~100 0 0 Engineering Design ANR

1~10000 200 200 Engineering Design ANR

1~10080 1440 1440 Engineering Design ANR

r1, r2, r4, r8, r16,

r4(4) r4(4) Engineering Design ANR
r32, r64, Infinity

120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
5120ms 5120ms Engineering Design ANR
5120ms, 10240ms,
1min, 6min, 12min,
30min, 60min
1~10080 60 60 Engineering Design ANR

-130~-70 -102 -102 Engineering Design ANR

1~200 5 5 Engineering Design ANR

1~200 5 5 Engineering Design ANR

1~10000 20 20 Engineering Design ANR

1~10000 20 20 Engineering Design ANR

FREE,
FREE(FREE) FREE(FREE) Engineering Design ANR
CONTROLLED
1~50400 10080 10080 Engineering Design ANR
1~10000 200 200 Engineering Design ANR
OFF, ON OFF(Off) OFF(Off) Engineering Design ANR

Default/Recommen
00:00:00~23:59:59 14:00:00 14:00:00 ANR
ded Value
 Default/Recommen
00:00:00~23:59:59 15:00:00 15:00:00 ANR
ded Value

-120~-25 -106 -106 Engineering Design ANR

-110~-48 -103 -103 Engineering Design ANR

-31.5~0 -30 -30 Engineering Design ANR

-31.5~0 -16 -16 Engineering Design ANR

0~100 40 40 Engineering Design ANR
0~10000 0 0 Engineering Design ANR
NCL_MODE,
NCL_MODE(NCL NCL_MODE(NCL
NCL_NRT_MODE, Engineering Design ANR
Mode) Mode)
NRT_MODE
BASED_NCL, BASED_NCL(BASE Default/Recommen
BASED_NCL ANR
NOT_BASED_NCL D_NCL) ded Value
CA_UE_CAP,
CA_UE_CARRIER_ CA_UE_CAP(CA Default/Recommen
None ANR
NUM, UE Capability) ded Value
ANR_UE_CAP
PERMIT_HO, PERMIT_HO(PER PERMIT_HO(PER Default/Recommen
ANR
FORBID_HO MIT_HO) MIT_HO) ded Value
 Default/Recommen
DISABLE, ENABLE ENABLE None ANR
ded Value
NO_CHECK, NO_CHECK(NO_C NO_CHECK(NO_C
Engineering Design ANR
PCI_CHECK HECK) HECK)
BASED_NCL, BASED_NCL(BASE BASED_NCL(BASE Default/Recommen
ANR
NOT_BASED_NCL D_NCL) D_NCL) ded Value
BASED_NCL, BASED_NCL(BASE BASED_NCL(BASE Default/Recommen
ANR
NOT_BASED_NCL D_NCL) D_NCL) ded Value
UTRAN_EVENT_A UTRAN_EVENT_A
NR_WITH_VOIP_M NR_WITH_VOIP_M
ODE, ODE:On,
GERAN_EVENT_A GERAN_EVENT_A
Default/Recommen
NR_WITH_VOIP_M NR_WITH_VOIP_M none ANR
ded Value
ODE, ODE:On,
CDMA_EVENT_AN CDMA_EVENT_AN
R_WITH_VOIP_MO R_WITH_VOIP_MO
DE DE:On
1~8 4 4 Engineering Design ANR

1~8 8 8 Engineering Design ANR

 EUTRAN_DELRED
UNDANCENCELL:
EUTRAN_DELRED Off,
UNDANCENCELL, UTRAN_DELREDU
UTRAN_DELREDU NDANCENCELL:Of
NDANCENCELL, f,
GERAN_DELREDU GERAN_DELREDU
NDANCENCELL, NDANCENCELL:Of
UTRAN_DELERRO f,
RNCELL, UTRAN_DELERRO
GERAN_DELERRO RNCELL:Off, Radio Planning
None ANR
RNCELL, GERAN_DELERRO (Internal planning)
EUTRAN_DELCEL RNCELL:Off,
LERRORNCELL, EUTRAN_DELCEL
MLB_DELNCELCT LERRORNCELL:Of
RL, f,
CA_DELNCELCTR MLB_DELNCELCT
L, RL:Off,
BLINDHO_DELNC CA_DELNCELCTR
ELCTRL L:Off,
BLINDHO_DELNC
ELCTRL:Off
 EutranCtrlOptMode:
On,
EutranCtrlOptMode,
UtranCtrlOptMode:
UtranCtrlOptMode, None Engineering Design ANR
On,
GeranCtrlOptMode
GeranCtrlOptMode:
On
 Radio Planning
0~10000 0 0 ANR
(Internal planning)
 Radio Planning
0~10000 0 0 ANR
(Internal planning)

1~50400 10080 10080 Engineering Design ANR

 The parameter
value 10 is
recommended
1~10000 1 Engineering Design ANR
when neighbor
relationship removal
by ANR is enabled.

The parameter
value 10 is
recommended
1~10000 1 Engineering Design ANR
when neighbor
relationship removal
by ANR is enabled.
1~100 80 None Engineering Design ANR
10~50400 10080 10080 Engineering Design ANR
1~50400 1440 1440 Engineering Design NCellClassMgt
0~10000 20 None Engineering Design NCellClassMgt
1~10000 20 None Engineering Design NCellClassMgt

Equipment
0~35 None None BfAnt
Planning
Andrew, TongYu,
HaiTian, COMBA,
TTCOM, MOBI,
GUOXIN, JIESAI,
OtherManufacturer OtherManufacturer
Default/Recommen
1, 1(OtherManufactur None BfAnt
ded Value
OtherManufacturer er1)
2,
OtherManufacturer
3, HuaweiAgisson,
ShengLu, HongXin

Equipment
0 0 0 BfAnt
Planning

Equipment
60~254 None None BfAnt
Planning

Equipment
0 0 None BfAnt
Planning

Equipment
0~128 characters NULL(empty string) None BfAnt
Planning

Radio Planning
0~15 0 None BfAnt
(Internal planning)

Radio Planning
30,65,90,360 30 None BfAnt
(Internal planning)
 Radio Planning
33~64 33 None BfAnt
(Internal planning)

INTELLIGENT, Default/Recommen
INTELLIGENT None BfAnt
DISTRIBUTED ded Value

Default/Recommen
-90~90 0 0 BfAnt
ded Value

SINGLE, DUAL None None N/A BfAnt

0~360 None None N/A BfAnt

FOURPORTS,
None None N/A BfAnt
EIGHTPORTS

0~1, step:0.01 None None N/A BfAnt

-180~180 None None N/A BfAnt

0~1, step:0.01 None None N/A BfAnt

-180~180 None None N/A BfAnt

0~1, step:0.01 None None N/A BfAnt

-180~180 None None N/A BfAnt

0~1, step:0.01 None None N/A BfAnt

-180~180 None None N/A BfAnt

0~1, step:0.01 None None N/A BfAnt

-180~180 None None N/A BfAnt

0~1, step:0.01 None None N/A BfAnt

-180~180 None None N/A BfAnt

65535~429496729
None None N/A BfAnt
5
 Default/Recommen
1~50400 10080 10080 BlindNcellOpt
ded Value

Default/Recommen
1~1000000 200 200 BlindNcellOpt
ded Value
 Default/Recommen
0~100 98 98 BlindNcellOpt
ded Value
 Default/Recommen
0~100 98 98 BlindNcellOpt
ded Value
 Default/Recommen
0~100 98 98 BlindNcellOpt
ded Value
FREE, CONTROLLED(CO CONTROLLED(CO Default/Recommen
BlindNcellOpt
CONTROLLED NTROLLED) NTROLLED) ded Value

Radio Planning
1~63 None None IpServiceQos
(Internal planning)

Radio Planning
0~64 None None IpServiceQos
(Internal planning)
 Radio Planning
OFF, ON OFF(OFF) None IpServiceQos
(Internal planning)

Radio Planning
0~127 None None IpServiceQos
(Internal planning)

Radio Planning
0~65535 0 None IpServiceQos
(Internal planning)

Radio Planning
0~127,255 255 0~127 IpServiceQos
(Internal planning)
 Default/Recommen
0~60 5 5 QoEHoCommonCfg
ded Value

Default/Recommen
0~60 3 3 QoEHoCommonCfg
ded Value

Radio Planning
0~127 None None QosPolicy
(Internal planning)
VIDEO,
Radio Planning
DOWNLOAD, OTHER(OTHER) OTHER(OTHER) QosPolicy
(Internal planning)
OTHER

QUEUE0,
QUEUE1,
QUEUE2,
Radio Planning
QUEUE3, QUEUE0(QUEUE0) None QosPolicy
(Internal planning)
QUEUE4,
QUEUE5,
QUEUE6, QUEUE7
 Radio Planning
0~4294967295 0 None QosPolicy
(Internal planning)

Radio Planning
0~4294967295 0 None QosPolicy
(Internal planning)

0~35 None None Engineering Design CaGroup

FDD, TDD,
FDD(FDD) None Engineering Design CaGroup
FDDTDD

Radio Planning
0~255 None None SsrdCellGroup
(Internal planning)

Radio Planning
0~255 None None SsrdCellGroup
(Internal planning)
0~35 None None Engineering Design CaGroupCell

0~255 None None Engineering Design CaGroupCell

Radio Planning
0~1048575 None None CaGroupCell
(Internal planning)
 Radio Planning
0~7 0 None CaGroupCell
(Internal planning)

Radio Planning
-140~-43 -105 None CaGroupCell
(Internal planning)
 Radio Planning
-20~-3 -20 None CaGroupCell
(Internal planning)

BOOLEAN_FALSE,
None None N/A CaGroupCell
BOOLEAN_TRUE

BOOLEAN_FALSE,
None None N/A CaGroupCell
BOOLEAN_TRUE

BOOLEAN_FALSE,
None None N/A CaGroupCell
BOOLEAN_TRUE
BOOLEAN_FALSE,
None None N/A CaGroupCell
BOOLEAN_TRUE

BOOLEAN_FALSE,
None None N/A CaGroupCell
BOOLEAN_TRUE

BOOLEAN_FALSE,
None None N/A CaGroupCell
BOOLEAN_TRUE

BOOLEAN_FALSE,
None None N/A CaGroupCell
BOOLEAN_TRUE
BOOLEAN_FALSE, BOOLEAN_FALSE(
OFF(Off) Engineering Design CellIdPrdUpt
BOOLEAN_TRUE False)

2000-01-
01T00:00:00+00:00 2000-01- 2000-01-
Engineering Design CellIdPrdUpt
~2099-12- 01T00:00:00+00:00 01T00:00:00+00:00
31T23:59:59+00:00

1~365 1 1 Engineering Design CellIdPrdUpt

Default/Recommen
OFF, ON OFF(Off) OFF(Off) CspcAlgoPara
ded Value
 RSRP_UL(Uplink RSRP_UL(Uplink Default/Recommen
RSRP_UL CspcAlgoPara
RSRP) RSRP) ded Value

STATIC_CONFIG,
STATIC_CONFIG(S STATIC_CONFIG(S Default/Recommen
DYNAMIC_PARTITI CspcAlgoPara
tatic Config) tatic Config) ded Value
ON_CONFIG

Default/Recommen
1~20 5 5 CspcAlgoPara
ded Value
 Default/Recommen
OFF, ON ON(On) ON(On) CspcAlgoPara
ded Value

Default/Recommen
0~100 5 5 CspcAlgoPara
ded Value
2~10 7 7 N/A CspcAlgoPara

Default/Recommen
1~25 1 1 CspcAlgoPara
ded Value
 Default/Recommen
0~100 70 70 CspcAlgoPara
ded Value

TddCspcMacroMicr TddCspcMacroMicr TddCspcMacroMicr Default/Recommen

CspcAlgoPara
oSwitch oSwitch:Off oSwitch:Off ded Value
 Default/Recommen
0~100 100 None CspcAlgoPara
ded Value

Radio Planning eNodeBUSServerCf

0~9 None None
(Internal planning) g
 Default/Recommen eNodeBUSServerCf
Valid IP address None None
ded Value g

Radio Planning eNodeBUSServerCf

0~65535 0 None
(Internal planning) g
 Radio Planning eNodeBUSServerCf
NONE, UDP, TCP NONE(Not_Check) None(Not_Check)
(Internal planning) g

0~46589,54436~65 Radio Planning

None None EutranSpePciCell
535 (Internal planning)

Radio Planning
0~503 None None EutranSpePciCell
(Internal planning)
 Radio Planning
1~504 1 None EutranSpePciCell
(Internal planning)

Cdma1xRttCsfbSwit
ch, Cdma20001xRttCsf
ch:Off,
UtranServiceHoSwit bSwitch:Off,
UtranServiceHoSwit
ch, UtranServiceHoSwit
ch:Off,
GeranServiceHoSw ch:Off,
GeranServiceHoSw
itch, GeranServiceHoSw
itch:Off,
CdmaHrpdServiceH itch:Off,
CdmaHrpdServiceH
oSwitch, Cdma2000HrpdSer
oSwitch:Off,
Cdma1xRttService viceHoSwitch:Off,
Cdma1xRttService
HoSwitch, Cdma20001xRttSer
HoSwitch:Off,
UlQualityInterRATH viceHoSwitch:Off,
UlQualityInterRATH
oSwitch, UlQualityInterRATH
oSwitch:Off,
InterPlmnHoSwitch, oSwitch:Off,
InterPlmnHoSwitch:
UtranFlashCsfbSwit InterPlmnHoSwitch:
Off,
ch, Off,
UtranFlashCsfbSwit
GeranFlashCsfbSwi UtranFlashCsfbSwit
ch:Off,
tch, ch:Off,
GeranFlashCsfbSwi
ServiceBasedInterF GeranFlashCsfbSwi
tch:Off,
reqHoSwitch, tch:Off,
ServiceBasedInterF
UlQualityInterFreqH ServiceBasedInterF Engineering Design ENodeBAlgoSwitch
reqHoSwitch:Off,
oSwitch, reqHoSwitch:Off,
UlQualityInterFreqH
CsfbAdaptiveBlindH UlQualityInterFreqH
oSwitch:Off,
oSwitch, oSwitch:Off,
CsfbAdaptiveBlindH
UtranCsfbSteeringS CsfbAdaptiveBlindH
oSwitch:Off,
witch, oSwitch:Off,
UtranCsfbSteeringS
GeranCsfbSteering UtranCsfbSteeringS
witch:Off,
Switch, witch:Off,
GeranCsfbSteering
CSFBLoadInfoSwit GeranCsfbSteering
Switch:Off,
ch, Switch:Off,
CSFBLoadInfoSwit
Cdma1XrttEcsfbSwi CSFBLoadInfoSwit
ch:Off,
tch, ch:Off,
Cdma1XrttEcsfbSwi
EmcBlindHoA1Swit Cdma1XrttEcsfbSwi
tch:Off,
ch, tch:Off,
EmcBlindHoA1Swit
EmcInterFreqBlind EmcBlindHoA1Swit
ch:Off,
HoSwitch, ch:Off,
EmcInterFreqBlind
EPlmnSwitch, EmcInterFreqBlind
HoSwitch:Off,
ServiceReqInterFre HoSwitch:Off,
EPlmnSwitch:Off,
qHoSwitch, EPlmnSwitch:Off,
ServiceReqInterFre
 h:Off, h:Off,
Cdma1xRttVoipCap Cdma1xRttVoipCap
UtranVoipCapSwitc Switch:Off, Switch:Off,
h, UtranPsHoSwitch:O UtranPsHoSwitch:O
Cdma1xRttVoipCap ff, ff,
Switch, GeranPsHoSwitch: GeranPsHoSwitch:
UtranPsHoSwitch, Off, Off,
GeranPsHoSwitch, CdmaHrpdNonOpti CdmaHrpdNonOpti
CdmaHrpdNonOpti misedHoSwitch:Off, misedHoSwitch:Off,
misedHoSwitch, CdmaHrpdOptimise CdmaHrpdOptimise
CdmaHrpdOptimise dHoSwitch:Off, dHoSwitch:Off,
dHoSwitch, GeranNaccSwitch: GeranNaccSwitch:
GeranNaccSwitch, Off, Off,
GeranCcoSwitch, GeranCcoSwitch:Of GeranCcoSwitch:Of
UtranSrvccSwitch, f, f,
GeranSrvccSwitch, UtranSrvccSwitch:O UtranSrvccSwitch:O
Cdma1xRttSrvccSw ff, ff,
itch, GeranSrvccSwitch: GeranSrvccSwitch:
UtranRedirectSwitc Off, Off, Engineering Design ENodeBAlgoSwitch
h, Cdma1xRttSrvccSw Cdma1xRttSrvccSw
GeranRedirectSwitc itch:Off, itch:Off,
h, UtranRedirectSwitc UtranRedirectSwitc
CdmaHrpdRedirect h:Off, h:Off,
Switch, GeranRedirectSwitc GeranRedirectSwitc
Cdma1xRttRedirect h:Off, h:Off,
Switch, CdmaHrpdRedirect CdmaHrpdRedirect
BlindHoSwitch, Switch:Off, Switch:Off,
LcsSrvccSwitch, Cdma1xRttRedirect Cdma1xRttRedirect
AutoGapSwitch, Switch:Off, Switch:Off,
UeVoipOnHspaCap BlindHoSwitch:Off, BlindHoSwitch:Off,
Switch, LcsSrvccSwitch:Off, LcsSrvccSwitch:Off,
UtranFddB1CapSwi AutoGapSwitch:Off, AutoGapSwitch:Off,
tch, UeVoipOnHspaCap UeVoipOnHspaCap
CdmaHrpdNonOpt Switch:Off, Switch:Off,
MeaHoSwitch UtranFddB1CapSwi UtranFddB1CapSwi
tch:Off, tch:Off,
CdmaHrpdNonOpt CdmaHrpdNonOpt
DlIcicSwitch_OFF_
ENUM,
DlIcicDynamicSwitc DlIcicSwitch_OFF_ DlIcicSwitch_OFF_
Engineering Design ENodeBAlgoSwitch
h_ON_ENUM, ENUM ENUM
DlIcicStaticSwitch_
ON_ENUM
witch, witch:Off, IntraRatFastAnrSwit
IntraRatFastAnrSwit IntraRatFastAnrSwit ch:Off,
ch, ch:Off, IntraRatAnrAutoDel
IntraRatAnrAutoDel IntraRatAnrAutoDel Switch:On,
Switch, Switch:On, UtranEventAnrSwitc
UtranEventAnrSwitc UtranEventAnrSwitc h:Off,
h, h:Off, GeranEventAnrSwit
GeranEventAnrSwit GeranEventAnrSwit ch:Off,
ch, ch:Off, UtranFastAnrSwitch
UtranFastAnrSwitch UtranFastAnrSwitch :Off,
, :Off, GeranFastAnrSwitc
GeranFastAnrSwitc GeranFastAnrSwitc h:Off,
h, h:Off, CdmaFastAnrSwitc
CdmaFastAnrSwitc CdmaFastAnrSwitc h:Off,
h, h:Off, UtranAutoNrtDelete
UtranAutoNrtDelete UtranAutoNrtDelete Switch:On,
Switch, Switch:On, GeranAutoNrtDelet
GeranAutoNrtDelet GeranAutoNrtDelet eSwitch:On,
eSwitch, eSwitch:On, CdmaAutoNrtDelete
Engineering Design ENodeBAlgoSwitch
CdmaAutoNrtDelete CdmaAutoNrtDelete Switch:On,
Switch, Switch:On, ExtendIntraRatAnrS
CdmaEventAnrSwit CdmaEventAnrSwit witch:Off,
ch, ch:Off, CdmaEventAnrSwit
MlbBasedEventAnr MlbBasedEventAnr ch:Off,
Switch, Switch:Off, MlbBasedEventAnr
IntraRatNoHoSetAn IntraRatNoHoSetAn Switch:Off,
rSwitch, rSwitch:Off, IntraRatNoHoSetAn
IntraRatDoubleThd IntraRatDoubleThd rSwitch:Off,
AnrSwitch, AnrSwitch:Off, IntraRatDoubleThd
ServiceBasedEvent ServiceBasedEvent AnrSwitch:Off,
AnrSwitch, AnrSwitch:Off, ServiceBasedEvent
ServiceReqEventA ServiceReqEventA AnrSwitch:Off,
nrSwitch, nrSwitch:Off, ServiceReqEventA
IntraRatEnhancedE IntraRatEnhancedE nrSwitch:Off,
ventAnrSwitch, ventAnrSwitch:Off, IntraRatEnhancedE
InterFreqAngcAnrS InterFreqAngcAnrS ventAnrSwitch:Off,
witch, witch:Off, InterFreqAngcAnrS
CaBasedEventAnrS CaBasedEventAnrS witch:Off,
 LoadBasedSwitch: LoadBasedSwitch:
LoadBasedSwitch,
Off, Off,
GeranFlashRedirect
GeranFlashRedirect GeranFlashRedirect
Switch,
Switch:Off, Switch:Off,
UtranFlashRedirect Engineering Design ENodeBAlgoSwitch
UtranFlashRedirect UranFlashRedirect
Switch,
Switch:Off, Switch:Off,
LoadRedirectFreqO
LoadRedirectFreqO LoadRedirectFreqO
ptSwitch
ptSwitch:Off ptSwitch:Off
 IntraFreqMroSwitch IntraFreqMroAlgoS
IntraFreqMroSwitch :Off, witch:Off,
, InterFreqMroSwitch InterFreqMroAlgoS
InterFreqMroSwitch :Off, witch: Off,
, UtranMroSwitch, UtranMroSwitch:Off UtranMroSwitch:
GeranMroSwitch, , Off,
UEMroSwitch, GeranMroSwitch:Of GeranMroSwitch:
IntraFreqReselOptS f, UEMroSwitch:Off, Off,
witch, IntraFreqReselOptS UeMroAlgoSwitch:
Engineering Design ENodeBAlgoSwitch
UtranUnnecHoOptS witch:Off, Off,
witch, UtranUnnecHoOptS IntraFreqReselOptS
GeranUnnecHoOpt witch:Off, witch: Off,
Switch, GeranUnnecHoOpt UtranUnnecHoOptS
IntraRatCallbackSw Switch:Off, witch: Off,
itch, IntraRatCallbackSw GeranUnnecHoOpt
UnnecHoOptWithou itch:Off, Switch: Off,
tRIM UnnecHoOptWithou IntraRatCallbackSw
tRIM:Off itch: Off

OFF, ON OFF( Off) OFF(Off) Engineering Design ENodeBAlgoSwitch

TpeAlgoSwitch TpeAlgoSwitch:Off TpeAlgoSwitch:Off Engineering Design ENodeBAlgoSwitch

Default/Recommen
OFF, ON OFF(Off) OFF(Off) ENodeBAlgoSwitch
ded Value
OFF, STATIC,
OFF(Off) OFF(Off) Engineering Design ENodeBAlgoSwitch
DYNAMIC
OtdoaSwitch, OtdoaSwitch:Off, OTDOA switch:Off,
Default/Recommen
EcidInterFreqMeas EcidInterFreqMeas EcidInterFreqMeas ENodeBAlgoSwitch
ded Value
Switch Switch:Off Switch:off
 UlUuFlowCtrlSwitch UU flow control
UlUuFlowCtrlSwitch Engineering Design ENodeBAlgoSwitch
:Off switch:Off
 Default/Recommen
OFF, ON OFF(Off) OFF(Off) ENodeBAlgoSwitch
ded Value
SymbolShutdownS SymbolShutdownS Symbol shutdown
Engineering Design ENodeBAlgoSwitch
witch witch:Off switch:off
UTRAN_RIM_SWIT UTRAN_RIM_SWIT
UTRAN RIM
CH, CH:Off,
Switch:Off, GERAN Engineering Design ENodeBAlgoSwitch
GERAN_RIM_SWI GERAN_RIM_SWI
RIM Switch:Off
TCH TCH:Off
NBSLTEPLMNRou NBSLTEPLMNRou NBSLTEPLMNRou
ndSwitch, ndSwitch:Off, ndSwitch:Off,
NBSLTERANSharin NBSLTERANSharin NBSLTERANSharin
gSwitch, gSwitch:Off, gSwitch:Off,
Engineering Design ENodeBAlgoSwitch
NBSUTRANRANSh NBSUTRANRANSh NBSUTRANRANSh
aringSwitch, aringSwitch:Off, aringSwitch:Off,
NBSGERANRANSh NBSGERANRANSh NBSGERANRANSh
aringSwitch aringSwitch:Off aringSwitch:Off
UtranFreqLayerMea UtranFreqLayerMea UtranFreqLayerMea
sSwitch, sSwitch:Off, sSwitch:Off,
UtranFreqLayerBlin UtranFreqLayerBlin UtranFreqLayerBlin
Engineering Design ENodeBAlgoSwitch
dSwitch, dSwitch:Off, dSwitch:Off,
UtranSrvccSteering UtranSrvccSteering UtranSrvccSteering
Switch Switch:Off Switch:Off

Default/Recommen
OFF, ON OFF(Off) None ENodeBAlgoSwitch
ded Value

VQM_ALGO_SWIT
CH_OFF, VQM_ALGO_SWIT VQM_ALGO_SWIT
Engineering Design ENodeBAlgoSwitch
VQM_ALGO_SWIT CH_OFF(Disable) CH_OFF(Disable)
CH_ON
IntraOpUeNumPree IntraOpUeNumPree IntraOpUeNumPree
mptSwitch, mptSwitch:Off, mptSwitch:Off,
Engineering Design ENodeBAlgoSwitch
InterOpUeNumPree InterOpUeNumPree InterOpUeNumPree
mptSwitch mptSwitch:Off mptSwitch:Off
UtranSepOpMobility UtranSepOpMobility UtranSepOpMobility
Engineering Design ENodeBAlgoSwitch
Switch Switch:Off Switch:Off
UlJointReceptionOv UlJointReceptionOv UlJointReceptionOv
erBBUsSwitch, erBBUsSwitch:Off, erBBUsSwitch:Off,
FreqCfgCaOverBB FreqCfgCaOverBB FreqCfgCaOverBB
UsSwitch, UsSwitch:Off, UsSwitch:Off,
Engineering Design ENodeBAlgoSwitch
UlJROverRelaxedB UlJROverRelaxedB UlJROverRelaxedB
HSw, HSw:Off, HSw:Off,
UlSfnJROverBBUs UlSfnJROverBBUs UlSfnJROverBBUs
Switch Switch:Off Switch:Off
LcsInterRatMeasSw LcsInterRatMeasSw LcsInterRatMeasSw Default/Recommen
ENodeBAlgoSwitch
itch itch:Off itch:Off ded Value
ReduceInvalidA1A2 ReduceInvalidA1A2 ReduceInvalidA1A2
RptSigSwitch, RptSigSwitch:Off, RptSigSwitch:Off,
MultiQciHoExecOpt MultiQciHoExecOpt MultiQciHoExecOpt
Switch, Switch:Off, Switch:Off,
ReduceInvalidFreq ReduceInvalidFreq ReduceInvalidFreq
PriHoSwitch, PriHoSwitch:Off, PriHoSwitch:Off,
AddA2MeasIfQciAd AddA2MeasIfQciAd AddA2MeasIfQciAd Default/Recommen
ENodeBAlgoSwitch
jSwitch, jSwitch:Off, jSwitch:Off, ded Value
InterFreqHoA2OptS InterFreqHoA2OptS InterFreqHoA2OptS
witch, witch:Off, witch:Off,
McUtranNcellNumO McUtranNcellNumO McUtranNcellNumO
ptSwtich, ptSwtich:Off, ptSwtich:Off,
ReduceMeasCtrlMe ReduceMeasCtrlMe ReduceMeasCtrlMe
sNumSwitch sNumSwitch:Off sNumSwitch:Off
 UECapRprtAbnorm
UECapRprtAbnorm
alCtrlSwitch:Off,
alCtrlSwitch, UECapRprtAbnorm
ApCqiRptAbnormal
ApCqiRptAbnormal alCtrlSwitch:Off,
CtrlSwitch:Off,
CtrlSwitch, ApCqiRptAbnormal
UeInterRatMeasCtrl
UeInterRatMeasCtrl CtrlSwitch:Off,
Switch:Off,
Switch, UeInterRatMeasCtrl
VoipExProtSwitch:O
VoipExProtSwitch, Switch:Off,
ff,
UeSRSAntSelectCtr VoipExProtSwitch:O
UeSRSAntSelectCtr
lSwitch, ff,
lSwitch:Off,
ApCqiAndAckAbnC UeSRSAntSelectCtr Engineering Design ENodeBAlgoSwitch
ApCqiAndAckAbnC
trlSwitch, lSwitch:Off,
trlSwitch:Off,
CaCqiAndAckAbnC ApCqiAndAckAbnC
CaCqiAndAckAbnC
trlSwitch, trlSwitch:Off,
trlSwitch:Off,
HoRlcSnSizeSwitch CaCqiAndAckAbnC
HoRlcSnSizeSwitch
, trlSwitch:Off,FddTd
:Off,
FddTddCaPcellDupl dCaPcellDuplexFdd
FddTddCaPcellDupl
exFdd, :on,FddTddCaPcell
exFdd:On,
FddTddCaPcellDupl DuplexTdd:off
FddTddCaPcellDupl
exTdd
exTdd:Off
GeranBlindNcellOpt GeranBlindNcellOpt
Switch, Switch:Off, Default/Recommen
None ENodeBAlgoSwitch
UtranBlindNcellOpt UtranBlindNcellOpt ded Value
Switch Switch:Off

OFF, ON OFF(Off) OFF(Off) N/A ENodeBAlgoSwitch

OFF, ON ON(On) None Engineering Design ENodeBAlgoSwitch

PccAnchorSwitch, Off,
SccBlindCfgSwitch, FreqCfgSwitch:Off,
FreqCfgSwitch, SccA2RmvSwitch:O
SccA2RmvSwitch, n,
CaTrafficTriggerSwi CaTrafficTriggerSwi
tch, tch:Off,
HoWithSccCfgSwitc HoWithSccCfgSwitc
h, h:Off,
SccModA6Switch, SccModA6Switch:O
GbrAmbrJudgeSwit ff,
ch, MtaAlgSwitch, GbrAmbrJudgeSwit
RelaxedBackhaulC ch:On, PdcchOverlapSrch
aSwitch, MtaAlgSwitch:Off, SpcSwitch:On,
AdpCaSwitch, RelaxedBackhaulC CaCapbFiltSwitch:
CaHoControlSwitch aSwitch:Off, Off,
, AdpCaSwitch:Off, GbrAmbrJudgeSwit
DistributeCloudbbC CaHoControlSwitch ch:Off,
aSwitch, :Off, AdpCaSwitch:Off,
SccSmartCfgSwitch DistributeCloudbbC CaHoControlSwitch N/A ENodeBAlgoSwitch
, aSwitch:Off, :Off,
IdleModePccAncho SccSmartCfgSwitch FreqPriBasedHoCa
rSwitch, :Off, FiltSwitch:On,
FreqPriBasedHoCa IdleModePccAncho CaA5HoEventSwitc
FiltSwitch, rSwitch:Off, h:On,
CaSccSuspendSwit FreqPriBasedHoCa CaSccSuspendSwit
ch, FiltSwitch:Off, ch:Off
PccSmartCfgSwitch CaSccSuspendSwit
, ch:Off,
CaA5HoEventSwitc PccSmartCfgSwitch
h, :Off,
EnhancedPccAnch CaA5HoEventSwitc
orSwitch, h:On,
CaAdpPreSchSwitc EnhancedPccAnch
h, CaPreSchSwitch, orSwitch:Off,
CaLoadBalancePre CaAdpPreSchSwitc
AllocSwitch, h:Off,
RelaxedBHCaArqS CaPreSchSwitch:Of
 INTER_FREQ_IDL INTER_FREQ_IDL
INTER_FREQ_IDL
E_MLB_SWITCH:O E_MLB_SWITCH:O Engineering Design ENodeBAlgoSwitch
E_MLB_SWITCH
ff ff
BasedSriGapOptS BasedSriGapOptS BasedSriGapOptS
witch, witch:On, witch:On,
L2UBasedHoPolicy L2UBasedHoPolicy L2UBasedHoPolicy
PenaltySwitch, PenaltySwitch:Off, PenaltySwitch:Off,
DrxBasedSriGapOp DrxBasedSriGapOp DrxBasedSriGapOp
Engineering Design ENodeBAlgoSwitch
tSwitch, tSwitch:On, tSwitch:On,
LaiCsfbBlindNCellS LaiCsfbBlindNCellS LaiCsfbBlindNCellS
elSwitch, elSwitch:Off, elSwitch:Off,
TrigQuanBothMeas TrigQuanBothMeas TrigQuanBothMeas
OptSw OptSw:Off OptSw:On
SPECSIGRETRAN SPECSIGRETRAN SPECSIGRETRAN
SOPTSWITCH, SOPTSWITCH:Off, SOPTSWITCH:Off,
Engineering Design ENodeBAlgoSwitch
FlowCtrlTriBackoffS FlowCtrlTriBackoffS FlowCtrlTriBackoffS
witch witch:Off witch:Off
LOADNOTBALANC LOADNOTBALANC LOADNOTBALANC
Engineering Design ENodeBAlgoSwitch
ESCHSWITCH ESCHSWITCH:Off ESCHSWITCH:Off
 Radio Planning
OFF, ON OFF(Off) OFF(Off) ENodeBAlgoSwitch
(Internal planning)
OFF, ON OFF(Off) ON(On) N/A ENodeBAlgoSwitch

TransDropPktsStat TransDropPktsStat TransDropPktsStat Default/Recommen

ENodeBAlgoSwitch
Switch Switch:Off Switch:Off ded Value
 GREAN
GERAN_SWITCH: Neighboring Cell
GERAN_SWITCH, Off, Ranking Switch:Off
Engineering Design ENodeBAlgoSwitch
UTRAN_SWITCH UTRAN_SWITCH: UTRAN
Off Neighboring Cell
Ranking Switch:Off

Radio Planning
OFF, ON OFF(Off) None ENodeBAlgoSwitch
(Internal planning)
L2LoadBalanceSwit L2LoadBalanceSwit L2 Load Balance Radio Planning
ENodeBAlgoSwitch
ch ch:Off Switch:Off (Internal planning)
 The parameter
value ON(On) is
recommended
when the RACH Default/Recommen
OFF, ON OFF(Off) ENodeBAlgoSwitch
success rate is ded Value
lower than the
predefined RACH
success rate.
ACHSwitch ACHSwitch:Off ACHSwitch:Off N/A ENodeBAlgoSwitch

Default/Recommen
OFF, ON OFF(OFF) None ENodeBAlgoSwitch
ded Value
BaseBandResetSwi BaseBandResetSwi BaseBandResetSwi
tch, tch:On, tch:On,
RFResetSwitch, RFResetSwitch:On, RFResetSwitch:On,
Default/Recommen
BBPResetDelaySwi BBPResetDelaySwi BBPResetDelaySwi ENodeBAlgoSwitch
ded Value
tch, tch:On, tch:On,
RFResetDelaySwitc RFResetDelaySwitc RFResetDelaySwitc
h h:On h:On
COLLISION_DETE COLLISION_DETE COLLISION_DETE
CT_SWITCH, CT_SWITCH:On, CT_SWITCH:Off,C Default/Recommen
ENodeBAlgoSwitch
CONFUSION_DET CONFUSION_DET ONFUSION_DETE ded Value
ECT_SWITCH ECT_SWITCH:On CT_SWITCH:On
 DlCaLbAlgoSwitch: DlCaLbAlgoSwitch: Default/Recommen
DlCaLbAlgoSwitch ENodeBAlgoSwitch
Off Off ded Value

Radio Planning
OFF, ON OFF(Off) OFF(Off) ENodeBAlgoSwitch
(Internal planning)
 Radio Planning
OFF, ON OFF(Off) None ENodeBAlgoSwitch
(Internal planning)

Default/Recommen
OFF, ON OFF(Off) OFF(Off) ENodeBAlgoSwitch
ded Value
ADAPTIVE_PROP ADAPTIVE_PROP ADAPTIVE_PROP
Engineering Design eNodeBMlb
ORTION ORTION:Off ORTION:Off
0~10080 1440 1440 Engineering Design eNodeBMlb
1~10000 3 3 Engineering Design eNodeBMlb
 Default/Recommen
3CC, 2CC 3CC(3CC) 3CC(3CC) eNodeBMlb
ded Value

Default/Recommen
0~99 0 0 eNodeBMlb
ded Value
1~100 25 25 Engineering Design LicRatio

SHARING,
SHARING(Sharing) SHARING(Sharing) Engineering Design LicRatio
DEDICATE

Radio Planning
0~5 None None LicRatioSharePolicy
(Internal planning)
 Radio Planning
0~100 0 None LicRatioSharePolicy
(Internal planning)

Radio Planning
0~100 0 0 LicRatioSharePolicy
(Internal planning)
 Default/Recommen
1~70000 1440 1440 MRO
ded Value

Default/Recommen
0~100 99 99 MRO
ded Value

Default/Recommen
0~10000 1000 1000 MRO
ded Value
 Default/Recommen
1~60 1 1 MRO
ded Value

Default/Recommen
0~100 5 5 MRO
ded Value
 Default/Recommen
0~100 60 60 MRO
ded Value

Default/Recommen
-140~-44 -116 -116 MRO
ded Value
 Default/Recommen
-140~-44 -116 -116 MRO
ded Value

Default/Recommen
1~7 5 5 MRO
ded Value
 20 for newly
deployed networks
Default/Recommen
0~100 5 with inter-frequency MRO
ded Value
MRO deployed for
the first time

Default/Recommen
0~100 2 2 MRO
ded Value
FREE, Default/Recommen
FREE(FREE) FREE(FREE) MRO
CONTROLLED ded Value

Default/Recommen
0~100 95 95 MRO
ded Value
 Default/Recommen
-140~-44 -115 -115 MRO
ded Value
 Default/Recommen
-141~-43 -118 -118 MRO
ded Value

Default/Recommen
0~10000 1000 1000 MRO
ded Value
 Default/Recommen
0~100 70 70 MRO
ded Value
 Default/Recommen
0~100 70 70 MRO
ded Value
 Default/Recommen
0~100 10 10 MRO
ded Value

Default/Recommen
1~30 30 None MRO
ded Value
 Default/Recommen
1~60 3 3 MRO
ded Value
 Radio Planning
0~100 10 10 MRO
(Internal planning)
 Radio Planning
0~100 20 20 MRO
(Internal planning)
 Radio Planning
0~100 20 20 MRO
(Internal planning)
 Default/Recommen
0~100 2 2 MRO
ded Value

0~9 None None Engineering Design SimuLoad

Default/Recommen
0~100 50 50 SimuLoad
ded Value
 Default/Recommen
0~100 50 50 SimuLoad
ded Value

Default/Recommen
0~50000 500 500 SimuLoad
ded Value

Default/Recommen
0~50000 5000 5000 SimuLoad
ded Value

Default/Recommen
OFF, ON OFF(Off) OFF(Off) SimuLoad
ded Value
OFF, ON OFF(Off) OFF(Off) Engineering Design TcpAckCtrlAlgo

0~4294967295 0 0 Engineering Design TcpAckCtrlAlgo

1~255 1 1 Engineering Design TcpAckCtrlAlgo

 Default/Recommen
OFF, ON OFF(Off) OFF(Off) TcpMssCtrl
ded Value

Default/Recommen
1~1460 1460 1460 TcpMssCtrl
ded Value
0~261120,275943~ Default/Recommen
0 0 TddFrameOffset
307200 ded Value

OFF, ON OFF(Off) OFF(Off) Engineering Design TddResModeSwitch

 You are advised to
set this parameter
to ON in either of
the following
scenarios:
Only some cells
served by the
OFF, ON OFF(Off) eNodeB are bound Engineering Design TddResModeSwitch
to baseband
processing units.
The UBBPd is
installed in the
eNodeB, and cell
combination must
be enabled.

0~20 3 3 Engineering Design TpeAlgo

0~65535 20 20 Engineering Design TpeAlgo

0~65535 80 80 Engineering Design TpeAlgo

0~65535 8080 8080 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

0~65535 0 0 Engineering Design TpeAlgo

1~255 100 100 Engineering Design VQMAlgo

0~5, step:0.01 300 300 Engineering Design VQMAlgo

0~5, step:0.01 200 200 Engineering Design VQMAlgo

0~5, step:0.01 100 100 Engineering Design VQMAlgo

0~100 10 10 Engineering Design VQMAlgo

0~100 5 5 Engineering Design VQMAlgo
0~100 2 2 Engineering Design VQMAlgo
0~100 1 1 Engineering Design VQMAlgo

Default/Recommen
0~5, step:0.01 400 400 VQMAlgo
ded Value
0~100 20 20 Engineering Design VQMAlgo
0~100 15 15 Engineering Design VQMAlgo
0~100 10 10 Engineering Design VQMAlgo
0~100 30 30 Engineering Design VQMAlgo

Default/Recommen
0~65535 5 5 eNBLicenseAlmThd
ded Value

Default/Recommen
50~100 100 100 eNBLicenseAlmThd
ded Value
 Default/Recommen
1~65535 5 5 eNBLicenseAlmThd
ded Value

Default/Recommen
49~99 90 90 eNBLicenseAlmThd
ded Value

Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit8:
0,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit9:
1,
Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
2,
0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
3,
1:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
4,
2:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
5,
3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
6,
4:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
7,
5:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1
8,
6:Off, Default/Recommen
RsvdSwPara0_bit1 None eNBRsvdPara
RsvdSwPara0_bit1 ded Value
9,
7:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
0,
8:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1
1,
9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
2,
0:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
3,
1:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
4,
2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
5,
3:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
6,
4:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
7,
5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2
 Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit8:
0,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit9:
1,
Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
2,
0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
3,
1:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
4,
2:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
5,
3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
6,
4:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
7,
5:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1
8,
6:Off, Default/Recommen
RsvdSwPara1_bit1 None eNBRsvdPara
RsvdSwPara1_bit1 ded Value
9,
7:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
0,
8:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1
1,
9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
2,
0:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
3,
1:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
4,
2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
5,
3:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
6,
4:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
7,
5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2
 On,
RsvdSwPara2_bit1
RsvdSwPara2_bit8:
0,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit9:
1,
On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
2,
0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
3,
1:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
4,
2:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
5,
3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
6,
4:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
7,
5:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1
8,
6:On, Default/Recommen
RsvdSwPara2_bit1 None eNBRsvdPara
RsvdSwPara2_bit1 ded Value
9,
7:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
0,
8:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1
1,
9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
2,
0:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
3,
1:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
4,
2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
5,
3:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
6,
4:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
7,
5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2
 Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit8:
0,
Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit9:
1,
Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
2,
0:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
3,
1:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
4,
2:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
5,
3:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
6,
4:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
7,
5:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1
8,
6:Off, Default/Recommen
RsvdSwPara3_bit1 None eNBRsvdPara
RsvdSwPara3_bit1 ded Value
9,
7:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit1
0,
8:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit1
1,
9:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
2,
0:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
3,
1:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
4,
2:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
5,
3:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
6,
4:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2
7,
5:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2

Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value

Default/Recommen
0~4294967295 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value

Default/Recommen
0~65535 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBRsvdPara
ded Value
 Default/Recommen
0~255 0 None eNBRsvdPara
ded Value

Default/Recommen
0~255 0 None eNBRsvdPara
ded Value

eNodeBAutoPower
OFF, ON OFF(Off) None Engineering Design
Off
 eNodeBAutoPower
22:00:00~05:00:00 00:00:00 None Engineering Design
Off

eNodeBAutoPower
23:00:00~06:00:00 06:00:00 None Engineering Design
Off
NORMAL, eNodeBAutoPower
None None N/A
POWER_OFF Off

eNodeBFlowCtrlPar
1~20 4 4 Engineering Design
a
 eNodeBFlowCtrlPar
50~100 100 100 Engineering Design
a
FLOWCONTROL, FLOWCONTROL(F FLOWCONTROL(F Default/Recommen eNodeBFlowCtrlPar
CPULOAD LOWCONTROL) LOWCONTROL) ded Value a

Default/Recommen eNodeBFlowCtrlPar
50~100 80 80
ded Value a
 Service
Parameter Interruption
Access Interrupted After Interruption Scope
Relationship Duration (min)
Modification

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
NULL if FirstRatPri
is set to EUTRAN.
In the
CnOperatorHoCfg
MO, SecondRatPri
No (And no impact
must be set to
Read & Write on the UE in idle N/A N/A
EUTRAN_TDD if
mode)
FirstRatPri is set to
EUTRAN_FDD.
In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
EUTRAN_FDD if
FirstRatPri is set to
EUTRAN_TDD.

In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
NULL if FirstRatPri
is set to EUTRAN.
In the
CnOperatorHoCfg
MO, SecondRatPri
No (And no impact
must be set to
Read & Write on the UE in idle N/A N/A
EUTRAN_TDD if
mode)
FirstRatPri is set to
EUTRAN_FDD.
In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
EUTRAN_FDD if
FirstRatPri is set to
EUTRAN_TDD.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
CnOperatorHoCfg
MO, if
PsInterRatSecondP
Read & Write N/A N/A N/A
ri is set to NULL,
PsInterRatLowestPr
i must also be set to
NULL.
In the
CnOperatorHoCfg
MO, the value of
PsInterRatHighestP
ri must be different
from the values of
PsInterRatSecondP
ri and
PsInterRatLowestPr
i.
In the Read & Write N/A N/A N/A
CnOperatorHoCfg
MO, if
PsInterRatSecondP
ri is set to a value
other than NULL,
the value must be
different from the
value of
PsInterRatLowestPr
i.

None Read & Write N/A N/A N/A

CnOperatorId in an
CnOperatorSpidCfg
MO must be set in Read Only N/A N/A N/A
the associated
CnOperator MO.
None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

RatFreqPriorityGrou
pId in a
CnOperatorSpidCfg No (And no impact
MO must be set in Read & Write on the UE in idle N/A N/A
the associated mode)
RatFreqPriorityGrou
p MO.

None Read Only N/A N/A N/A

The
ServiceHoBearerPo
licy in the
CnOperatorStandar
dQci can be set to
SERVICE_HO_QCI
Read Only N/A N/A N/A
_NOT_ALLOWED
only when the value
of the Qci in the
CnOperatorStandar
dQci is set to QCI1
or QCI2.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
The
ServiceHoBearerPo
licy in the
CnOperatorStandar
dQci can be set to
No (And no impact
SERVICE_HO_QCI
Read & Write on the UE in idle N/A N/A
_NOT_ALLOWED
mode)
only when the value
of the Qci in the
CnOperatorStandar
dQci is set to QCI1
or QCI2.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

In the
CSFallBackBlindHo
Cfg MO,
InterRatHighestPri
must be different
from
No (And no impact
InterRatLowestPri.
Read & Write on the UE in idle N/A N/A
In the
mode)
CSFallBackBlindHo
Cfg MO,
InterRatHighestPri
must be different
from
InterRatSecondPri.
In the
CSFallBackBlindHo
Cfg MO,
InterRatHighestPri
must be different
from
InterRatSecondPri. No (And no impact
In the Read & Write on the UE in idle N/A N/A
CSFallBackBlindHo mode)
Cfg MO,
InterRatLowestPri
must be set to
NULL if
InterRatSecondPri
is set to NULL.
In the
CSFallBackBlindHo
Cfg MO,
InterRatHighestPri
must be different
from
InterRatLowestPri.
In the
CSFallBackBlindHo
Cfg MO,
InterRatLowestPri
No (And no impact
must be set to
Read & Write on the UE in idle N/A N/A
NULL if
mode)
InterRatSecondPri
is set to NULL.
In the
CSFallBackBlindHo
Cfg MO,
InterRatSecondPri
must be different
from
InterRatLowestPri if
InterRatSecondPri
is not set to NULL.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbHighestPri
must be different
from
No (And no impact
IdleCsfbLowestPri.
Read & Write on the UE in idle N/A N/A
In the
mode)
CSFallBackBlindHo
Cfg MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbSecondPri.
In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbSecondPri.
In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbLowestPri
No (And no impact
must be set to
Read & Write on the UE in idle N/A N/A
NULL if
mode)
IdleCsfbSecondPri
is set to NULL.
In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbSecondPri
must be different
from
IdleCsfbLowestPri if
IdleCsfbSecondPri
is not set to NULL.
In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbLowestPri.
In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbLowestPri
No (And no impact
must be set to
Read & Write on the UE in idle N/A N/A
NULL if
mode)
IdleCsfbSecondPri
is set to NULL.
In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbSecondPri
must be different
from
IdleCsfbLowestPri if
IdleCsfbSecondPri
is not set to NULL.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

In the same
RAT/frequency
priority group
specified by
No (And no impact
RatFreqPriorityGrou
Read & Write on the UE in idle N/A N/A
pId, frequencies
mode)
used for different
RATs must be
assigned different
priorities.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

DlEarfcn in
ServiceIfDlEarfcnGr
p can not be
reduplicated for the
same CnOperatorId
Read & Write N/A N/A N/A
and
ServiceIfHoCfgGrou
pId in
ServiceIfDlEarfcnGr
p
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A
None Read & Write N/A N/A N/A
None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

Mcc in each
SpidHPlmnList MO
Read Only N/A N/A N/A
consists of digits
only.

Mnc in each
SpidHPlmnList MO
Read Only N/A N/A N/A
consists of digits
only.
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

When more than
oneUtranNetworkC
apCfgis
configured,under
the same Mcc and Read Only N/A N/A N/A
Mnc, RncId
4294967295 can
not be co-exist with
other RncId values.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

quotation marks ("),

commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three or
more consecutive
plus signs (+), two
or more
consecutive
spaces, and two or
more consecutive
percentage signs
(%).
Due to the
limitations defined
in 3GPP TS 36.413
for the S1 interface, No (And no impact
the value of Read & Write on the UE in idle N/A N/A
eNodeBFunctionNa mode)
me can contain only
the following
characters that
comply with
American Standard
Code for
Information
Interchange
(ASCII): upper-case
letters (A to Z),
lower-case letters
(a to z), digits (0 to
9), single blank ( ),
left brackets ((),
right brackets ()),
plus signs (+),
hyphens (-), and full
None Read Only N/A N/A N/A

Less than 3
None Read & Write Yes eNodeB
minutes

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

The corresponding
RRN resets. During
In all EuRrn MOs,
the reset, services
the values of the
on the RRN and all
RelayType Read & Write Yes 2
eNodeBs
parameter must be
connected to this
the same.
RRN are
interrupted.
None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write Noo/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

The number of the

EuRrnLanIp MOs
with the
LocalSubscriberId
Read Only N/A N/A N/A
parameters set to
the same value is
less than or equal
to 16.
None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

The number of the

EuRrnRt MOs with
the
LocalSubscriberId
Read & Write N/A N/A N/A
parameters set to
the same value is
less than or equal
to 8.

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

The value of the

IMSI parameter in
the EuSubscriber Read & Write N/A N/A N/A
MO must be
unique.
The value of the
RrnId parameter in
each EuSubscriber
MO must be
unique.
The value of the Read & Write N/A N/A N/A
RrnId parameter in
the EuSubscriber
MO must consist of
digits from 0 to 9
only.

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

One and only one

RelayExtendedQci
MO in which the
DefaultBearerInd Read & Write N/A N/A N/A
parameter is set to
YES can be
configured.

None Read & Write N/A N/A N/A

A maximum of four
RelayExtendedQci
MOs in which the
SchType parameter
is set to PQ(PQ)
can be configured.
Read & Write N/A N/A N/A
A maximum of three
RelayExtendedQci
MOs in which the
SchType parameter
is set to WFQ can
be configured.
None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

A maximum of one
RelayExtendedQci
MO can be
configured if the
Read & Write N/A N/A N/A
PqType parameter
is set to L3PQ,
L2OM, L2HIGH, or
L2LOW.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
ENodeBCipherCap
MO, the
PrimaryCipherAlgo,
No (And no impact
SecondCipherAlgo,
Read & Write on the UE in idle N/A N/A
ThirdCipherAlgo,an
mode)
d FourthCipherAlgo
parameters must be
set to different
values.
In the
ENodeBCipherCap
MO, the
PrimaryCipherAlgo,
No (And no impact
SecondCipherAlgo,
Read & Write on the UE in idle N/A N/A
ThirdCipherAlgo,an
mode)
d FourthCipherAlgo
parameters must be
set to different
values.

In the
ENodeBCipherCap
MO, the
PrimaryCipherAlgo,
No (And no impact
SecondCipherAlgo,
Read & Write on the UE in idle N/A N/A
ThirdCipherAlgo,an
mode)
d FourthCipherAlgo
parameters must be
set to different
values.

In the
ENodeBCipherCap
MO, the
PrimaryCipherAlgo,
No (And no impact
SecondCipherAlgo,
Read & Write on the UE in idle N/A N/A
ThirdCipherAlgo,an
mode)
d FourthCipherAlgo
parameters must be
set to different
values.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
ENodeBIntegrityCa
p MO, the
PrimaryIntegrityAlg
o, No (And no impact
SecondIntegrityAlg Read & Write on the UE in idle N/A N/A
o, and mode)
ThirdIntegrityAlgo
parameters must be
set to different
values.

In the
ENodeBIntegrityCa
p MO, the
PrimaryIntegrityAlg
o, No (And no impact
SecondIntegrityAlg Read & Write on the UE in idle N/A N/A
o, and mode)
ThirdIntegrityAlgo
parameters must be
set to different
values.

In the
ENodeBIntegrityCa
p MO, the
PrimaryIntegrityAlg
o, No (And no impact
SecondIntegrityAlg Read & Write on the UE in idle N/A N/A
o, and mode)
ThirdIntegrityAlgo
parameters must be
set to different
values.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
UeTypeDesc is a
string of a
maximum of 80
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
quotation marks ("), No (And no impact
commas (,), Read & Write on the UE in idle N/A N/A
semicolons (;), mode)
equal signs (=),
single quotation
marks ('), three plus
signs (+++), two or
more consecutive
spaces, and two or
more consecutive
percentage signs
(%)

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A
None Read & Write N/A N/A N/A

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In a
PrivateCaBandCom
b MO, the value of No (And no impact
CombBand2Id must Read & Write on the UE in idle N/A N/A
be greater than or mode)
equal to the value
of CombBand1Id.
In a
PrivateCaBandCom
b MO, if the value
of CombBand3Id is No (And no impact
not 0, the value of Read & Write on the UE in idle N/A N/A
CombBand3Id must mode)
be greater than or
equal to the value
of CombBand2Id.

In a
PrivateCaBandCom
b MO, if the value
of CombBand4Id is
not 0, the value of
CombBand4Id must
be greater than or
equal to the value No (And no impact
of CombBand3Id. Read & Write on the UE in idle N/A N/A
In a mode)
PrivateCaBandCom
b MO, if the value
of CombBand4Id is
not 0, the value of
CombBand3Id must
be a non-zero
value.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In a
PrivateCaBandCom
b MO, if the value
of CombBand5Id is
not 0, the value of
CombBand5Id must
be greater than or
equal to the value No (And no impact
of CombBand4Id. Read & Write on the UE in idle N/A N/A
In a mode)
PrivateCaBandCom
b MO, if the value
of CombBand5Id is
not 0, the value of
CombBand4Id must
be a non-zero
value.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
valid only when the
DynDrxSwitch
No (And no impact
option of the
Read & Write on the UE in idle N/A N/A
DynDrxSwitch
mode)
parameter in the
CellAlgoSwitch MO
is cleared.
This parameter
takes effect when
the DynDrxSwitch
option of the No (And no impact
DynDrxSwitch Read & Write on the UE in idle N/A N/A
parameter is mode)
deselected or UEs
are not DRX-
capable.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
valid only when the
DynDrxSwitch
No (And no impact
option of the
Read & Write on the UE in idle N/A N/A
DynDrxSwitch
mode)
parameter in the
CellAlgoSwitch MO
is selected.
This parameter is
valid only when the
DynDrxSwitch
No (And no impact
option of the
Read & Write on the UE in idle N/A N/A
DynDrxSwitch
mode)
parameter in the
CellAlgoSwitch MO
is selected.
This parameter is
valid only when the
DynDrxSwitch
No (And no impact
option of the
Read & Write on the UE in idle N/A N/A
DynDrxSwitch
mode)
parameter in the
CellAlgoSwitch MO
is cleared.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A
None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
When the IPMODE
parameter is set to
IPV4(IPv4), the
TceIpV4Addr
parameter must be No (And no impact
set. When the Read & Write on the UE in idle N/A N/A
IPMODE parameter mode)
is set to IPV6(IPv6),
the TceIpV4Addr
parameter does not
need to be set.

When the IPMODE

parameter is set to
IPV6(IPv6), the
TceIpV6Addr
parameter must be No (And no impact
set. When the Read & Write on the UE in idle N/A N/A
IPMODE parameter mode)
is set to IPV4(IPv4),
the TceIpV6Addr
parameter does not
need to be set.

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

Mcc in each
X2AutoSetupOpera
Read Only N/A N/A N/A
tor MO consists of
digits only.

Mnc in each
X2AutoSetupOpera
Read Only N/A N/A N/A
tor MO consists of
digits only.

None Read Only N/A N/A N/A

In the CaMgtCfg
MO, the value of
CarrAggrA4ThdRsr No (And no impact
p must be greater Read & Write on the UE in idle N/A N/A
than the value of mode)
CarrAggrA2ThdRsr
p
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If the
CaDl4CCSwitch
option of the
CellCaAlgoSwitch
parameter in the
CaMgtCfg MO is
selected, the
CaDl3CCSwitch
option of the
CellCaAlgoSwitch
parameter must be
No (And no impact
selected.
Read & Write on the UE in idle N/A N/A
If the
mode)
CaDl5CCSwitch
option of the
CellCaAlgoSwitch
parameter in the
CaMgtCfg MO is
selected, the
CaDl4CCSwitch
option of the
CellCaAlgoSwitch
parameter must be
selected.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

This parameter is
valid only when the
BfSwitch check box
No (And no impact
is selected in the
Read & Write on the UE in idle N/A N/A
BfAlgoSwitch
mode)
parameter under
the CellAlgoSwitch
MO.
determines the
transmission mode
that applies to UEs
served by a multi-
antenna eNodeB.
The transmission
modes vary with the
application
scenarios:
1. TM2 applies to
UEs with low SINR
and a high speed.
2. TM3 applies to
UEs with high SINR
and a high speed.
3. TM4 applies to
UEs with high SINR
and a low speed.
No (And no impact
4. TM7 applies to
Read & Write on the UE in idle N/A N/A
UEs with low SINR
mode)
and a low speed.
5. TM8 applies to
UEs with high SINR
and a low speed.
6. TM9w/oPMI
applies to UEs with
high SINR and a
low speed.
7. TM9wPMI
applies to UEs with
high SINR and a
low speed.
The throughput and
coverage achieve
the best
performance only
when the setting of
this parameter
This parameter is
valid only if the
BfMimoAdaptiveSwi
tch No (And no impact
parameter is set to Read & Write on the UE in idle N/A N/A
MIMO_BF_ADAPTI mode)
VE(MIMO_BF_ADA
PTIVE)
.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
The value of the
DualBfToTM3Rank2
Offset parameter
under the
CellBfMimoParaCfg
MO must be less
No (And no impact
than or equal to the
Read & Write on the UE in idle N/A N/A
value of the
mode)
TM3Rank2ToDualBf
ThdOffset
parameter under
the
CellBfMimoParaCfg
MO plus 4.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
The value of the
DualBfToTM3Rank2
Offset parameter
under the
CellBfMimoParaCfg
MO must be less
No (And no impact
than or equal to the
Read & Write on the UE in idle N/A N/A
value of the
mode)
TM3Rank2ToDualBf
ThdOffset
parameter under
the
CellBfMimoParaCfg
MO plus 4.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
valid only when the
BfSwitch check box
No (And no impact
is selected in the
Read & Write on the UE in idle N/A N/A
BfAlgoSwitch
mode)
parameter under
the CellAlgoSwitch
MO.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

This parameter is
valid only when the No (And no impact
CqiPeriodAdaptive Read & Write on the UE in idle N/A N/A
parameter is set to mode)
OFF(Off).
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

This parameter is
valid only when the
DlCompSwitch
No (And no impact
parameter in the
Read & Write on the UE in idle N/A N/A
CellAlgoSwitch MO
mode)
of the
corresponding cell
is selected.

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter
must be set for
using a fixed
PDSCH power if
PdschSpsPcSwitch
under the No (And no impact
DlPcAlgoSwitch Read & Write on the UE in idle N/A N/A
parameter is turned mode)
off and the
DlIcicSwitch
parameter is set to
DlIcicSwitch_OFF_
ENUM.

None Read Only N/A N/A N/A

In a CellDrxPara
MO, the value of
No (And no impact
FddEnterDrxThd
Read & Write on the UE in idle N/A N/A
must not be greater
mode)
than the value of
FddExitDrxThd.
In a CellDrxPara
MO, the value of
No (And no impact
FddEnterDrxThd
Read & Write on the UE in idle N/A N/A
must not be greater
mode)
than the value of
FddExitDrxThd.
In a CellDrxPara
MO, the value of
No (And no impact
TddEnterDrxThdUl
Read & Write on the UE in idle N/A N/A
must be less than
mode)
the value of
TddExitDrxThdUl.

In a CellDrxPara
MO, the value of
No (And no impact
TddEnterDrxThdUl
Read & Write on the UE in idle N/A N/A
must be less than
mode)
the value of
TddExitDrxThdUl.
In a CellDrxPara
MO, the value of
No (And no impact
TddEnterDrxThdDl
Read & Write on the UE in idle N/A N/A
must be less than
mode)
the value of
TddExitDrxThdDl.

In a CellDrxPara
MO, the value of
No (And no impact
TddEnterDrxThdDl
Read & Write on the UE in idle N/A N/A
must be less than
mode)
the value of
TddExitDrxThdDl.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In a CellDrxPara
MO, the value of
TddPowerSavingEn
No (And no impact
terDrxThd must be
Read & Write on the UE in idle N/A N/A
less than the value
mode)
of
TddPowerSavingEx
itDrxThd.

In a CellDrxPara
MO, the value of
TddPowerSavingEn
No (And no impact
terDrxThd must be
Read & Write on the UE in idle N/A N/A
less than the value
mode)
of
TddPowerSavingEx
itDrxThd.
In a CellDrxPara
MO, the value of
OndurationTimerUn
sync must be
smaller than the
value of
LongDrxCycleUnsy
nc. For LTE TDD
cells, the unit for
the value of the
OndurationTimerUn
sync parameter is
PSF while that for
the value of the No (And no impact
LongDrxCycleUnsy Read & Write on the UE in idle N/A N/A
nc parameter is SF. mode)
Before comparing
the periods
specified by these
parameters and
whether these
parameters are
effective, unify the
value units. For
details, see
"Parameter
Relationship" about
OndurationTimerUn
sync.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
divided by 10.
If SA0 is used, the
value of
LongDrxCycleUnsy
nc equals to x*4 +
temp(y) where: if y
= 0, temp = 0; y = 2,
temp = 2; y = 4,
temp = 2; y = 5,
temp = 2; y = 6,
temp = 3; y = 8,
temp = 4.
If SA1 is used, the
value of
LongDrxCycleUnsy
nc equals to x*6 +
temp(y) where: if y
= 0, temp = 0; y = 2, No (And no impact
temp = 2; y = 4, Read & Write on the UE in idle N/A N/A
temp = 2; y = 5, mode)
temp = 3; y = 6,
temp = 4; y = 8,
temp = 5.
If SA2 is used, the
value of
LongDrxCycleUnsy
nc equals to x*8 +
temp(y) where: if y
= 0, temp = 0; y = 2,
temp = 2; y = 4,
temp = 3; y = 5,
temp = 4; y = 6,
temp = 5; y = 8,
temp = 6.
If SA3 is used, the
value of
LongDrxCycleUnsy
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
When this
parameter is set to
HANDOVER_IMME
DIATELY, the Read & Write No N/A N/A
CsfbMRWaitingTim
er parameter does
not take effect.

None Read & Write No N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

This parameter is
valid only when the
BfSwitch option of No (And no impact
the BfAlgoSwitch Read & Write on the UE in idle N/A N/A
parameter in the mode)
CellAlgoSwitch MO
is cleared.
This parameter is
valid only when the No (And no impact
MimoAdaptiveSwitc Read & Write on the UE in idle N/A N/A
h parameter is set mode)
to NO_ADAPTIVE.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

The value of
InterFreqMlbHoInA
1ThdRsrp in the
CellMlbHo MO No (And no impact
cannot be smaller Read & Write on the UE in idle N/A N/A
than the value of mode)
InterFreqMlbHoInA
2ThdRsrp in the
CellMlbHo MO.
The value of
InterFreqMlbHoInA
1ThdRsrq in the
CellMlbHo MO No (And no impact
cannot be smaller Read & Write on the UE in idle N/A N/A
than the value of mode)
InterFreqMlbHoInA
2ThdRsrq in the
CellMlbHo MO.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

In the CellOpHoCfg
MO,
InterRatHighestPri
must be different
from
No (And no impact
InterRatLowestPri.
Read & Write on the UE in idle N/A N/A
In the CellOpHoCfg
mode)
MO,
InterRatHighestPri
must be different
from
InterRatSecondPri.

In the CellOpHoCfg
MO,
InterRatHighestPri
must be different
from
InterRatSecondPri.
In the CellOpHoCfg
MO,
InterRatLowestPri
must be set to No (And no impact
NULL if Read & Write on the UE in idle N/A N/A
InterRatSecondPri mode)
is set to NULL.
In the CellOpHoCfg
MO,
InterRatSecondPri
must be different
from
InterRatLowestPri if
InterRatSecondPri
is not set to NULL.
In the CellOpHoCfg
MO,
InterRatHighestPri
must be different
from
InterRatLowestPri.
In the CellOpHoCfg
MO,
InterRatLowestPri
must be set to No (And no impact
NULL if Read & Write on the UE in idle N/A N/A
InterRatSecondPri mode)
is set to NULL.
In the CellOpHoCfg
MO,
InterRatSecondPri
must be different
from
InterRatLowestPri if
InterRatSecondPri
is not set to NULL.

In the CellOpHoCfg
MO,
IdleCsfbHighestPri
must be different
from
No (And no impact
IdleCsfbLowestPri.
Read & Write on the UE in idle N/A N/A
In the CellOpHoCfg
mode)
MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbSecondPri.
In the CellOpHoCfg
MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbSecondPri.
In the CellOpHoCfg
MO,
IdleCsfbLowestPri
must be set to No (And no impact
NULL if Read & Write on the UE in idle N/A N/A
IdleCsfbSecondPri mode)
is set to NULL.
In the CellOpHoCfg
MO,
IdleCsfbSecondPri
must be different
from
IdleCsfbLowestPri if
IdleCsfbSecondPri
is not set to NULL.

In the CellOpHoCfg
MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbLowestPri.
In the CellOpHoCfg
MO,
IdleCsfbLowestPri
must be set to No (And no impact
NULL if Read & Write on the UE in idle N/A N/A
IdleCsfbSecondPri mode)
is set to NULL.
In the CellOpHoCfg
MO,
IdleCsfbSecondPri
must be different
from
IdleCsfbLowestPri if
IdleCsfbSecondPri
is not set to NULL.
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only No N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

This parameter is
valid only when the No (And no impact
SrsPeriodAdaptive Read & Write on the UE in idle N/A N/A
parameter is set to mode)
OFF(Off).

None Read Only No N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

This parameter is
valid only when the
UL CoMP function
specified by the
No (And no impact
UplinkCompSwitch
Read & Write on the UE in idle N/A N/A
parameter in the
mode)
CellAlgoSwitch MO
for the
corresponding cell
is enabled.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
Due to the
restraints on
transmission
latency and
bandwidths, the
eNodeB only
selects UEs with
more potential
gains for relaxed-
backhaul-based UL
No (And no impact
CoMP. Therefore,
Read & Write on the UE in idle N/A N/A
the
mode)
UlCompA3OffsetFo
rRelaxedBH
parameter must be
set to a large value,
and it is
recommended that
it be greater than
the value of the
UlCompA3Offset
parameter.

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
10(metric system);
Read & Write on the UE in idle N/A N/A
33(imperial system)
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
value of the
LongDrxCycle or
ShortDrxCycle
parameter divided
by 10.
If SA0 is used, the
value of
LongDrxCycle or
ShortDrxCycle
equals to x*4 +
temp(y) where: if y
= 0, temp = 0; y = 2,
temp = 2; y = 4,
temp = 2; y = 5,
temp = 2; y = 6,
temp = 3; y = 8,
temp = 4.
If SA1 is used, the
No (And no impact
value of
Read & Write on the UE in idle N/A N/A
LongDrxCycle or
mode)
ShortDrxCycle
equals to x*6 +
temp(y) where: if y
= 0, temp = 0; y = 2,
temp = 2; y = 4,
temp = 2; y = 5,
temp = 3; y = 6,
temp = 4; y = 8,
temp = 5.
If SA2 is used, the
value of
LongDrxCycle or
ShortDrxCycle
equals to x*8 +
temp(y) where: if y
= 0, temp = 0; y = 2,
temp = 2; y = 4,
temp = 3; y = 5,
This parameter is
No (And no impact
invalid when
Read & Write on the UE in idle N/A N/A
EnterDrxSwitch is
mode)
set to OFF.
This parameter is
No (And no impact
invalid when
Read & Write on the UE in idle N/A N/A
EnterDrxSwitch is
mode)
set to OFF.
This parameter is
invalid when
EnterDrxSwitch is
set to OFF.
In a DrxParaGroup
MO, the value of
OnDurationTimer
must not be greater
than the value of
LongDrxCycle. For
LTE TDD cells, the
unit for the value of
the
OnDurationTimer
parameter is PSF No (And no impact
while that for the Read & Write on the UE in idle N/A N/A
value of the mode)
LongDrxCycle
parameter is SF.
Before comparing
the periods
specified by these
parameters and
whether these
parameters are
effective, unify the
value units. For
details, see
"Parameter
Relationship" about
OnDurationTimer.

This parameter is
No (And no impact
invalid when
Read & Write on the UE in idle N/A N/A
EnterDrxSwitch is
mode)
set to OFF.
UU_ENABLE, the
value of
LongDrxCycle must
be an integer
multiple of
ShortDrxCycle.
This parameter is
invalid when
EnterDrxSwitch is
set to OFF.
In a DrxParaGroup
MO, the value of
OnDurationTimer
must not be greater
than the value of
ShortDrxCycle if
SupportShortDrx is
set to
No (And no impact
UU_ENABLE. For
Read & Write on the UE in idle N/A N/A
LTE TDD cells, the
mode)
unit for the value of
the
OnDurationTimer
parameter is PSF
while that for the
value of the
ShortDrxCycle
parameter is SF.
Before comparing
the periods
specified by these
parameters and
whether these
parameters are
effective, unify the
value units. For
details, see
"Parameter
This parameter is
No (And no impact
invalid when
Read & Write on the UE in idle N/A N/A
EnterDrxSwitch is
mode)
set to OFF.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In an
InterRatHoCommGr
oup MO, the value
of
No (And no impact
InterRatHoA1ThdR
Read & Write on the UE in idle N/A N/A
srp must be greater
mode)
than or equal to the
value of
InterRatHoA2ThdR
srp.
In an
InterRatHoCommGr
oup MO, the value
of
No (And no impact
InterRatHoA1ThdR
Read & Write on the UE in idle N/A N/A
srq must be greater
mode)
than or equal to the
value of
InterRatHoA2ThdR
srq.

In an
InterRatHoCommGr
oup MO, the value
of
No (And no impact
InterRatHoA1ThdR
Read & Write on the UE in idle N/A N/A
srp must be greater
mode)
than or equal to the
value of
InterRatHoA2ThdR
srp.

In an
InterRatHoCommGr
oup MO, the value
of
No (And no impact
InterRatHoA1ThdR
Read & Write on the UE in idle N/A N/A
srq must be greater
mode)
than or equal to the
value of
InterRatHoA2ThdR
srq.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If coverage-based
handover is
enabled and the
threshold specified
by this parameter is
higher than the
associated
threshold for
coverage-based
No (And no impact
inter-RAT handover,
Read & Write on the UE in idle N/A N/A
coverage-based
mode)
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
service-based
handovers will not
occur.
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

This parameter is
No (And no impact
valid only when
Read & Write on the UE in idle N/A N/A
RlfTimerConstCfgIn
mode)
d is set to CFG.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

This parameter is
valid only when the
No (And no impact
SriPeriodAdaptive
Read & Write on the UE in idle N/A N/A
parameter in the
mode)
PUCCHCfg MO is
set to OFF.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

This parameter is
No (And no impact
valid only when
Read & Write on the UE in idle N/A N/A
RlfTimerConstCfgIn
mode)
d is set to CFG.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If coverage-based
handover is
enabled and the
threshold specified
by this parameter is
higher than the
associated
threshold for
coverage-based
No (And no impact
inter-RAT handover,
Read & Write on the UE in idle N/A N/A
coverage-based
mode)
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
service-based
handovers will not
occur.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If the threshold
specified through
this parameter is
higher than the
associated
threshold for the
coverage-based
inter-RAT handover
and the coverage-
based handover is No (And no impact
enabled, the Read & Write on the UE in idle N/A N/A
coverage-based mode)
handover takes
precedence over
both the load- and
service-based
handovers. In this
case, the load- and
service-based
handovers would
not occur.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If coverage-based
handover is
enabled and the
threshold specified
by this parameter is
higher than the
associated
threshold for
coverage-based
No (And no impact
inter-RAT handover,
Read & Write on the UE in idle N/A N/A
coverage-based
mode)
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
service-based
handovers will not
occur.

If coverage-based
handover is
enabled and the
threshold specified
by this parameter is
higher than the
associated
threshold for
coverage-based
No (And no impact
inter-RAT handover,
Read & Write on the UE in idle N/A N/A
coverage-based
mode)
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
service-based
handovers will not
occur.
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In an
InterFreqHoGroup
MO, the value of
InterFreqHoA1Thd
No (And no impact
Rsrp must be
Read & Write on the UE in idle N/A N/A
greater than or
mode)
equal to the value
of
InterFreqHoA2Thd
Rsrp.
In an
InterFreqHoGroup
MO, the value of
InterFreqHoA1Thd
No (And no impact
Rsrq must be
Read & Write on the UE in idle N/A N/A
greater than or
mode)
equal to the value
of
InterFreqHoA2Thd
Rsrq.

1. The value of
InterFreqHoA2Thd
Rsrp must be
smaller than that of
InterFreqHoA1Thd
Rsrp.
No (And no impact
2. In an
Read & Write on the UE in idle N/A N/A
InterFreqHoGroup
mode)
MO, the value of
InterFreqHoA1Thd
Rsrp must be larger
than or equal to
InterFreqHoA2Thd
Rsrp.
1. The value of
InterFreqHoA2Thd
Rsrq must be
smaller than that of
InterFreqHoA1Thd
Rsrq.
No (And no impact
2. In an
Read & Write on the UE in idle N/A N/A
InterFreqHoGroup
mode)
MO, the value of
InterFreqHoA1Thd
Rsrq must be larger
than or equal to
InterFreqHoA2Thd
Rsrq.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In an
InterFreqHoGroup
MO, the value of
A3InterFreqHoA1T
No (And no impact
hdRsrp must be
Read & Write on the UE in idle N/A N/A
greater than or
mode)
equal to the value
of
A3InterFreqHoA2T
hdRsrp.
In an
InterFreqHoGroup
MO, the value of
A3InterFreqHoA1T
No (And no impact
hdRsrp must be
Read & Write on the UE in idle N/A N/A
greater than or
mode)
equal to the value
of
A3InterFreqHoA2T
hdRsrp.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In an
InterFreqHoGroup
MO, the value of
A3InterFreqHoA1T
No (And no impact
hdRsrq must be
Read & Write on the UE in idle N/A N/A
greater than or
mode)
equal to the value
of
A3InterFreqHoA2T
hdRsrq.
In an
InterFreqHoGroup
MO, the value of
A3InterFreqHoA1T
No (And no impact
hdRsrq must be
Read & Write on the UE in idle N/A N/A
greater than or
mode)
equal to the value
of
A3InterFreqHoA2T
hdRsrq.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

The value of
CnOperatorName in No (And no impact
each CnOperator Read & Write on the UE in idle N/A N/A
MO must be mode)
unique.

CnOperatorType
can be set to
Less than 3
CNOPERATOR_PR Read & Write Yes eNodeB
minutes
IMARY in only one
CnOperator MO.
Mcc in each
CnOperator MO
consists of digits
only.
Less than 3
The combination of Read & Write Yes eNodeB
minutes
Mcc and Mnc in
each CnOperator
MO must be
unique.

Mnc in each
CnOperator MO Less than 3
Read & Write Yes eNodeB
consists of digits minutes
only.

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

The combination of
CnOperatorId and
Less than 0.1
Tac in each Read & Write Yes Cell
minute
CnOperatorTa MO
must be unique.

The combination of
CnOperatorId and
Less than 0.1
Tac in each Read & Write Yes Cell
minute
CnOperatorTa MO
must be unique.

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
PrimaryOperatorId
and
SecondaryOperator
Id referenced by
SecondaryOperator
List in the same
CnOpSharingGroup
Less than 0.1
MO must be set to Read & Write Yes Cell
minute
different values.
The value of
PrimaryOperatorId
in each
CnOpSharingGroup
MO must be
unique.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
No (And no impact
valid when
Read & Write on the UE in idle N/A N/A
EmcEnable is set to
mode)
ON.
This parameter is
No (And no impact
valid when
Read & Write on the UE in idle N/A N/A
EmcEnable is set to
mode)
ON.
This parameter is
No (And no impact
valid when
Read & Write on the UE in idle N/A N/A
EmcEnable is set to
mode)
ON.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 3
None Read & Write Yes eNodeB
minutes

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
none Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Less than 3
None Read & Write Yes LMPT borad
minutes
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 3
None Read & Write Yes eNodeB
minutes
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write No N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
thereby network
KPIs are affected,
selecting
AbnormalUeHandle
Switch can disable
related features on
UEs and therefore
the KPIs are
improved.
UltraFlashCsfbCom
OptSw: If this
option is selected,
UE incompatibility
risks in ultra-flash
CSFB can be
resolved. In
addition, if a UE
that does not
No (And no impact
support ultra-flash
Read & Write on the UE in idle N/A N/A
CSFB fails to
mode)
perform ultra-flash
CSFB, the
standardized CSFB
procedure can be
avoided to be
triggered for the
UE. If this option is
deselected, if a UE
that does not
support ultra-flash
CSFB fails to
perform ultra-flash
CSFB, the
standardized CSFB
procedure is
triggered for the
UE. The
standardized CSFB
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write No N/A N/A

None Read Only N/A N/A N/A

The sum of
MaxUserNumRate
in all
LicenseSharingPoli
cy MOs cannot
exceed 100.
No (And no impact
In the
Read & Write on the UE in idle N/A N/A
LicenseSharingPoli
mode)
cy MO, the value of
UserNumSharingRa
te must be less
than or equal to that
of
MaxUserNumRate

In the
LicenseSharingPoli
cy MO, the value of
No (And no impact
UserNumSharingRa
Read & Write on the UE in idle N/A N/A
te must be less
mode)
than or equal to that
of
MaxUserNumRate

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

The value of
MMEDomName in
the
MMEDomainName
MO can contain
only the following
characters: lower-
case letters (a to z), No (And no impact
upper-case letters Read & Write on the UE in idle N/A N/A
(A to Z), digits (0 to mode)
9), hyphens (-), and
full stops (.).
The values of
MMEDomName in
MMEDomainName
MOs must be
different.

In the
S1ReestTimer MO,
the value of No (And no impact
S1ReestMinTimer Read & Write on the UE in idle N/A N/A
must be less than mode)
or equal to that of
S1ReestMaxTimer.
In the
S1ReestTimer MO,
the value of No (And no impact
S1ReestMinTimer Read & Write on the UE in idle N/A N/A
must be less than mode)
or equal to that of
S1ReestMaxTimer.

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write Yes eNodeB Less than 1 minute

When the AppType
parameter is set to
S1(S1), the
S1InterfaceId
parameter must be
set. When the Read & Write Yes eNodeB Less than 1 minute
AppType parameter
is set to X2(X2), the
S1InterfaceId
parameter does not
need to be set.

When the AppType

parameter is set to
X2(X2), the
X2InterfaceId
parameter must be
set. When the Read & Write Yes eNodeB Less than 1 minute
AppType parameter
is set to S1(S1), the
X2InterfaceId
parameter does not
need to be set.

None Read Only N/A N/A N/A

Less than 0.1

None Read & Write Yes eNodeB
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

Less than 0.1

None Read & Write Yes eNodeB
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Less than 0.1

None Read Only N/A Cell
minute
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

Less than 0.1

None Read & Write Yes Cell
minute

The CpEpGroupId
value in each S1 Less than 0.1
Read & Write Yes Cell
MO must be minute
unique.

Less than 0.1

None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Less than 0.1

None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Less than 0.1

None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 Less than 0.1
None Read Only N/A Cell
minute

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

The S1CpBearerId
value in each Less than 0.1
Read & Write Yes Cell
S1Interface MO minute
must be unique.

Less than 0.1

None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (After an S1
interface is blocked,
None Read & Write UEs in idle mode N/A N/A
cannot access the
network.)
 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Less than 0.1

None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

Services provided
by the multi-mode
baseband
None Read Only Yes processing board 2 minutes
where the
baseband resource
is located
 Services provided
by the multi-mode
baseband
None Read Only Yes processing board 2 minutes
where the
baseband resource
is located

Services provided
by the multi-mode
baseband
None Read Only Yes processing board 2 minutes
where the
baseband resource
is located

Services provided
by the multi-mode
baseband
None Read Only Yes processing board 2 minutes
where the
baseband resource
is located
 Until the eNodeB
Services provided
FDD baseband
None Read & Write Yes by the baseband
resource is
resource
unblocked

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

Services provided
by the multi-mode
baseband
None Read Only Yes processing board 2 minutes
where the
baseband resource
is located
 Services provided
by the multi-mode
baseband
None Read Only Yes processing board 2 minutes
where the
baseband resource
is located

Services provided
by the multi-mode
baseband
None Read Only Yes processing board 2 minutes
where the
baseband resource
is located

Services provided
by the multi-mode
baseband
None Read Only Yes processing board 2 minutes
where the
baseband resource
is located
 Until the eNodeB
The baseband TDD baseband
None Read & Write Yes
resource itself resource is
unblocked

None Read Only No N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
The CpEpGroupId
No (And no impact
value in each eX2
Read & Write on the UE in idle N/A N/A
MO must be
mode)
unique.

The UpEpGroupId
No (And no impact
value in each eX2
Read & Write on the UE in idle N/A N/A
MO must be
mode)
unique.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

Less than 0.1

None Read & Write Yes eNodeB
minute
The CpEpGroupId
value in each X2 Less than 0.1
Read & Write Yes eNodeB
MO must be minute
unique.

Less than 0.1

None Read & Write Yes eNodeB
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Less than 0.1

None Read & Write Yes eNodeB
minute
 Less than 0.1
None Read & Write Yes eNodeB
minute

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

Mcc in an
X2BlackWhiteList
Read Only N/A N/A N/A
MO consists of
digits only.
Mnc in an
X2BlackWhiteList
Read Only N/A N/A N/A
MO consists of
digits only.

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

The X2CpBearerId
value in each Less than 0.1
Read & Write Yes eNodeB
X2Interface MO minute
must be unique.

Less than 0.1

None Read & Write Yes eNodeB
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes eNodeB
minute

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the Drx MO, the
value of
OnDurationTimerSp
ecial must not be
greater than the
value of
LongDrxCycleSpeci
al. For LTE TDD
cells, the unit for
the value of the
OnDurationTimerSp
ecial parameter is
PSF while that for
the value of the No (And no impact
LongDrxCycleSpeci Read & Write on the UE in idle N/A N/A
al parameter is SF. mode)
Before comparing
the periods
specified by these
parameters and
whether these
parameters are
effective, unify the
value units. For
details, see
"Parameter
Relationship" about
OnDurationTimerSp
ecial.
LongDrxCycleSpeci
al or
ShortDrxCycleSpeci
al parameter
divided by 10.
If SA0 is used, the
value of
LongDrxCycleSpeci
al or
ShortDrxCycleSpeci
al equals to x*4 +
temp(y) where: if y
= 0, temp = 0; y = 2,
temp = 2; y = 4,
temp = 2; y = 5,
temp = 2; y = 6,
temp = 3; y = 8,
temp = 4.
No (And no impact
If SA1 is used, the
Read & Write on the UE in idle N/A N/A
value of
mode)
LongDrxCycleSpeci
al or
ShortDrxCycleSpeci
al equals to x*6 +
temp(y) where: if y
= 0, temp = 0; y = 2,
temp = 2; y = 4,
temp = 2; y = 5,
temp = 3; y = 6,
temp = 4; y = 8,
temp = 5.
If SA2 is used, the
value of
LongDrxCycleSpeci
al or
ShortDrxCycleSpeci
al equals to x*8 +
temp(y) where: if y
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
UU_ENABLE, the
value of
LongDrxCycleSpeci
al must be an
integer multiple of
ShortDrxCycleSpeci
al.
In the Drx MO, the
value of
OnDurationTimerSp
ecial must not be
greater than the
value of
ShortDrxCycleSpeci
al if
SupportShortDrxSp
ecial is set to
UU_ENABLE. For No (And no impact
LTE TDD cells, the Read & Write on the UE in idle N/A N/A
unit for the value of mode)
the
OnDurationTimerSp
ecial parameter is
PSF while that for
the value of the
ShortDrxCycleSpeci
al parameter is SF.
Before comparing
the periods
specified by these
parameters and
whether these
parameters are
effective, unify the
value units. For
details, see
"Parameter
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.

This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_UM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_UM.

This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_UM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_UM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_UM.

This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.
This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.

This parameter is
No (And no impact
valid when RlcMode
Read & Write on the UE in idle N/A N/A
is set to
mode)
RlcMode_AM.

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

This parameter is No (And no impact
valid only for QCIs Read & Write on the UE in idle N/A N/A
6 to 9. mode)

This parameter is No (And no impact

valid only for QCIs Read & Write on the UE in idle N/A N/A
6 to 9. mode)

This parameter is No (And no impact

valid only for QCIs Read & Write on the UE in idle N/A N/A
6 to 9. mode)
This parameter is No (And no impact
valid only for QCIs Read & Write on the UE in idle N/A N/A
6 to 9. mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

This parameter is
No (And no impact
valid only for QCIs
Read & Write on the UE in idle N/A N/A
2 to 4 and QCIs 6
mode)
to 9.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

This parameter is No (And no impact

valid only for QCIs Read & Write on the UE in idle N/A N/A
5 to 9. mode)
None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
valid only when the No (And no impact
CqiPeriodAdaptive Read & Write on the UE in idle N/A N/A
parameter is set to mode)
OFF(Off).

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes eNodeB
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
valid only when the No (And no impact
SrsPeriodAdaptive Read & Write on the UE in idle N/A N/A
parameter is set to mode)
OFF(Off).

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If SMeasureInd is
set to CFG,
SMeasure must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If SMeasureInd is
mode)
set to NOT_CFG,
SMeasure does not
need to be set.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If
SpeedDepParaInd
is set to CFG,
TcrMaxConnMode
must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
SpeedDepParaInd mode)
is set to NOT_CFG,
TcrMaxConnMode
does not need to be
set.
If
SpeedDepParaInd
is set to CFG,
TcrMaxHystConnM
ode must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
SpeedDepParaInd mode)
is set to NOT_CFG,
TcrMaxHystConnM
ode does not need
to be set.
In the
HoMeasComm MO,
if
SpeedDepParaInd
is set to CFG,
NcrHighConnMode
must be greater
than
NcrMediumConnMo
de. No (And no impact
If Read & Write on the UE in idle N/A N/A
SpeedDepParaInd mode)
is set to CFG,
NcrMediumConnMo
de must be set.
If
SpeedDepParaInd
is set to NOT_CFG,
NcrMediumConnMo
de does not need to
be set.
In the
HoMeasComm MO,
if
SpeedDepParaInd
is set to CFG,
NcrHighConnMode
must be greater
than
NcrMediumConnMo
de. No (And no impact
If Read & Write on the UE in idle N/A N/A
SpeedDepParaInd mode)
is set to CFG,
NcrHighConnMode
must be set.
If
SpeedDepParaInd
is set to NOT_CFG,
NcrHighConnMode
does not need to be
set.
If
SpeedDepParaInd
is set to CFG,
TttSfMedium must
No (And no impact
be set.
Read & Write on the UE in idle N/A N/A
If
mode)
SpeedDepParaInd
is set to NOT_CFG,
TttSfMedium does
not need to be set.
If
SpeedDepParaInd
is set to CFG,
TttSfHigh must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If
mode)
SpeedDepParaInd
is set to NOT_CFG,
TttSfHigh does not
need to be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In a
InterRatHoComm
MO, if
Cdma20001XrttMe
asMode is set to No (And no impact
PERIOD, Read & Write on the UE in idle N/A N/A
Cdma20001XrttFre mode)
qSelMode must be
set to
BY_SELECT_RATI
O.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In a
InterRatHoComm
MO, if
Cdma20001XrttMe
asMode is set to No (And no impact
PERIOD, Read & Write on the UE in idle N/A N/A
Cdma20001XrttFre mode)
qSelMode must be
set to
BY_SELECT_RATI
O.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
on the UE in idle
mode. This
parameter is used
None Read & Write with other N/A N/A
parameters related
to cell access
barring to control
the UE accesses.)
 No (For the UE in
idle mode, if it is
AcBarringForEmerg
BOOLEAN_TRUE,
ency is optional,
the emergency calls
depending on the
Read & Write initiated by the UEs N/A N/A
setting of
of access
AcBarringInfoCfgIn
categories 0 to 9 or
d.
UEs without IMSI
are rejected.)

No (The access
request of the
AcBarringForMoDat mobile-originated
aCfgInd is optional, call initiated by a
depending on the UE in idle mode is
Read & Write N/A N/A
setting of accepted or
AcBarringInfoCfgIn rejected according
d. to the
corresponding
barring status.)
 No (For the UE in
idle mode, the
AcBarringFactorFor source call
Call is optional, accesses are
depending on the allowed only when
Read & Write N/A N/A
setting of the random number
AcBarringForMoDat generated by the
aCfgInd. UE is smaller than
the access
probability factor.)

AcBarTimeForCall
is optional,
No (And no impact
depending on the
Read & Write on the UE in idle N/A N/A
setting of
mode)
AcBarringForMoDat
aCfgInd.
 No (And no impact
on the UE in idle
AC11BarforCall is
mode. If this
optional, depending
parameter is set to
on the setting of Read & Write N/A N/A
BOOLEAN_TRUE,
AcBarringForMoDat
UEs of access class
aCfgInd.
11 are not allowed
to initiate calls.)

No (And no impact
on the UE in idle
mode. If this
AC12BarforCall is
parameter is set to
optional, depending
BOOLEAN_TRUE,
on the setting of Read & Write N/A N/A
the mobile-
AcBarringForMoDat
originated calls
aCfgInd.
initiated by UEs of
access class 12 are
not allowed.)
 No (And no impact
on the UE in idle
mode. If this
AC13BarforCall is
parameter is set to
optional, depending
BOOLEAN_TRUE,
on the setting of Read & Write N/A N/A
the mobile-
AcBarringForMoDat
originated calls
aCfgInd.
initiated by UEs of
access class 13 are
not allowed.)

No (And no impact
on the UE in idle
mode. If this
AC14BarforCall is
parameter is set to
optional, depending
BOOLEAN_TRUE,
on the setting of Read & Write N/A N/A
the mobile-
AcBarringForMoDat
originated calls
aCfgInd.
initiated by UEs of
access class 14 are
not allowed.)
 No (And no impact
on the UE in idle
mode. If this
AC15BarforCall is
parameter is set to
optional, depending
BOOLEAN_TRUE,
on the setting of Read & Write N/A N/A
the mobile-
AcBarringForMoDat
originated calls
aCfgInd.
initiated by UEs of
access class 15 are
not allowed.)

No (The access
request of the
AcBarringForMoSig
signaling initiated
CfgInd is optional,
by a UE in idle
depending on the
Read & Write mode is accepted N/A N/A
setting of
or rejected
AcBarringInfoCfgIn
according to the
d.
corresponding
barring status.)
 No (The signaling
initiated by a UE in
AcBarTimeForSig is idle mode is
optional, depending granted access only
on the setting of the Read & Write when the random N/A N/A
AcBarringForMoSig number generated
CfgInd parameter. by the UE is smaller
than the access
probability factor.)

AcBarTimeForSig is
optional, depending No (And no impact
on the setting of Read & Write on the UE in idle N/A N/A
AcBarringForMoSig mode)
CfgInd.
 No (And no impact
on the UE in idle
AC11BarForSig is mode. If this
optional, depending parameter is set to
on the setting of Read & Write BOOLEAN_TRUE, N/A N/A
AcBarringForMoSig the signaling
CfgInd. access initiated by
UEs of access class
11 are not allowed.)

No (And no impact
on the UE in idle
AC12BarForSig is mode. If this
optional, depending parameter is set to
on the setting of Read & Write BOOLEAN_TRUE, N/A N/A
AcBarringForMoSig the signaling
CfgInd. access initiated by
UEs of access class
12 are not allowed.)
 No (And no impact
on the UE in idle
AC13BarForSig is mode. If this
optional, depending parameter is set to
on the setting of Read & Write BOOLEAN_TRUE, N/A N/A
AcBarringForMoSig the signaling
CfgInd. access initiated by
UEs of access class
13 are not allowed.)

No (And no impact
on the UE in idle
AC14BarForSig is mode. If this
optional, depending parameter is set to
on the setting of Read & Write BOOLEAN_TRUE, N/A N/A
AcBarringForMoSig the signaling
CfgInd. access initiated by
UEs of access class
14 are not allowed.)
 No (And no impact
on the UE in idle
AC15BarForSig is mode. If this
optional, depending parameter is set to
on the setting of Read & Write BOOLEAN_TRUE, N/A N/A
AcBarringForMoSig the signaling
CfgInd. access initiated by
UEs of access class
15 are not allowed.)

No (The access
The request of MMTEL
AcBarForMVoiceCf voice services
gInd parameter is initiated by a UE in
optional, depending Read & Write idle mode is N/A N/A
on the accepted or barred
AcBarringInfoCfgIn based on the
d parameter setting. corresponding
barring indicator.)
In the CellAcBar
MO, if any of
AC11BARSTATE,
No (If the random
AC12BARSTATE,
number generated
AC13BARSTATE,
by the UE in idle
AC14BARSTATE,
mode is less than
and
Read & Write this access N/A N/A
AC15BARSTATE
probability factor,
under
the MMTEL voice
SpecialACBarForM
service is granted
Voice is selected,
access.)
AcBarFactorForMV
oice must be set to
P00.

The
AcBarTimeForMVoi
ce parameter is
No (And no impact
optional, depending
Read & Write on the UE in idle N/A N/A
on the
mode)
AcBarForMVoiceCf
gInd parameter
setting.
In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE,
AC13BARSTATE,
AC14BARSTATE,
No (And no impact
and
Read & Write on the UE in idle N/A N/A
AC15BARSTATE
mode)
under
SpecialACBarForM
Voice is selected,
AcBarFactorForMV
oice must be set to
P00.

No (The access
The request of MMTEL
AcBarForMVideoCf video services
gInd parameter is initiated by a UE in
optional, depending Read & Write idle mode is N/A N/A
on the accepted or barred
AcBarringInfoCfgIn based on the
d parameter setting. corresponding
barring indicator.)
In the CellAcBar
MO, if any of
AC11BARSTATE,
No (If the random
AC12BARSTATE,
number generated
AC13BARSTATE,
by the UE in idle
AC14BARSTATE,
mode is less than
and
Read & Write this access N/A N/A
AC15BARSTATE
probability factor,
under
the MMTEL video
SpecialACBarForM
service is granted
Video is selected,
access.)
AcBarFactorForMVi
deo must be set to
P00.

The
AcBarTimeForMVid
eo parameter is
No (And no impact
optional, depending
Read & Write on the UE in idle N/A N/A
on the
mode)
AcBarForMVideoCf
gInd parameter
setting.
In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE,
AC13BARSTATE,
AC14BARSTATE,
No (And no impact
and
Read & Write on the UE in idle N/A N/A
AC15BARSTATE
mode)
under
SpecialACBarForM
Video is selected,
AcBarFactorForMVi
deo must be set to
P00.

No (The access
The request of the
AcBarForCsfbCfgIn CSFB service
d parameter is initiated by a UE in
optional, depending Read & Write idle mode is N/A N/A
on the accepted or barred
AcBarringInfoCfgIn based on
d parameter setting. corresponding
barring status.)
In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE, No (If the random
AC13BARSTATE, number generated
AC14BARSTATE, by the UE in idle
and mode is less than
Read & Write N/A N/A
AC15BARSTATE this access
under probability factor,
SpecialACBarForCs the CS service is
fb is selected, granted access.)
AcBarFactorForCsf
b must be set to
P00.

The
AcBarTimeForCsfb
parameter is No (And no impact
optional, depending Read & Write on the UE in idle N/A N/A
on the mode)
AcBarForCsfbCfgIn
d parameter setting.
In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE,
AC13BARSTATE,
AC14BARSTATE,
No (And no impact
and
Read & Write on the UE in idle N/A N/A
AC15BARSTATE
mode)
under
SpecialACBarForCs
fb is selected,
AcBarFactorForCsf
b must be set to
P00.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

No (Modifications
on this parameter
None Read & Write will affect the cell on N/A N/A
which the UE in idle
mode camps.)
 No (Modifications
on this parameter
None Read & Write will affect the cell on N/A N/A
which the UE in idle
mode camps.)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the CellAccess
MO, the year,
month, day, and
hour in
RoundActionTime No (And no impact
can be set to non- Read & Write on the UE in idle N/A N/A
zero values, and mode)
others (such as the
minute and second)
in this parameter
must be set to 0.

LOFD-001105 /
No (And no impact
TDLOFD-
Read & Write on the UE in idle N/A N/A
001105:Dynamic
mode)
DRX
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
The sum of
OpUlRbUsedRatio No (And no impact
in all CellOp MOs of Read & Write on the UE in idle N/A N/A
the same cell mode)
cannot exceed 100.
The sum of
OpDlRbUsedRatio No (And no impact
in all CellOp MOs of Read & Write on the UE in idle N/A N/A
the same cell mode)
cannot exceed 100.
When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity Read & Write Yes Cell 0.1
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.
When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity Read & Write Yes Cell 0.1
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.
When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity Read & Write Yes Cell 0.1
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.
When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity Read & Write Yes Cell 0.1
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.
When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity Read & Write Yes Cell 0.1
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.
When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity Read & Write Yes Cell 0.1
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.
When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity Read & Write Yes Cell 0.1
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.
When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity Read & Write Yes Cell 0.1
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.
When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
MME group identity Read & Write Yes Cell 0.1
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.

In the CellOp MO,

the sum of
No (And no impact
OpUeNumRatio in
Read & Write on the UE in idle N/A N/A
the same cell must
mode)
be less than or
equal to 100.
In a CellOp MO, the
value of
No (And no impact
OpPttUlRbLowThd
Read & Write on the UE in idle N/A N/A
must be smaller
mode)
than
OpPttUlRbHighThd.

In a CellOp MO, the

value of
No (And no impact
OpPttUlRbLowThd
Read & Write on the UE in idle N/A N/A
must be smaller
mode)
than
OpPttUlRbHighThd.
In a CellOp MO, the
value of
No (And no impact
OpPttDlRbLowThd
Read & Write on the UE in idle N/A N/A
must be smaller
mode)
than
OpPttDlRbHighThd.

In a CellOp MO, the

value of
No (And no impact
OpPttDlRbLowThd
Read & Write on the UE in idle N/A N/A
must be smaller
mode)
than
OpPttDlRbHighThd.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

This parameter is
optional, depending
on the setting of the
SpeedDepReselCfg
Ind parameter.
If the
SpeedDepReselCfg No (Modifications
Ind parameter is set on this parameter
to CFG, this Read & Write would affect cell N/A N/A
parameter must be reselection of the
set. UE in idle mode.)
If the
SpeedDepReselCfg
Ind parameter is set
to NOT_CFG, this
parameter does not
need to be set.
This parameter is
optional, depending
on the setting of
SpeedDepReselCfg
Ind.
If
No (Modifications
SpeedDepReselCfg
on this parameter
Ind is set to CFG,
Read & Write would affect cell N/A N/A
THystNormal must
reselection of the
be set.
UE in idle mode.)
If
SpeedDepReselCfg
Ind is set to
NOT_CFG,
THystNormal does
not need to be set.

In the CellResel
MO, if
SpeedDepReselCfg
Ind is set to CFG,
NCellChangeHigh
must be greater
than
NCellChangeMediu
m. No (Modifications
If on this parameter
SpeedDepReselCfg Read & Write would affect cell N/A N/A
Ind is set to CFG, reselection of the
NCellChangeMediu UE in idle mode.)
m must be set.
If
SpeedDepReselCfg
Ind is set to
NOT_CFG,
NCellChangeMediu
m does not need to
be set.
In the CellResel
MO, if
SpeedDepReselCfg
Ind is set to CFG,
NCellChangeHigh
must be greater
than
NCellChangeMediu
m. No (Modifications
If on this parameter
SpeedDepReselCfg Read & Write would affect cell N/A N/A
Ind is set to CFG, reselection of the
NCellChangeHigh UE in idle mode.)
must be set.
If
SpeedDepReselCfg
Ind is set to
NOT_CFG,
NCellChangeHigh
does not need to be
set.

This parameter is
optional, depending
on the setting of
SpeedDepReselCfg
Ind.
If
SpeedDepReselCfg No (Modifications
Ind is set to CFG, on this parameter
QHystSfMedium Read & Write would affect cell N/A N/A
must be set. reselection of the
If UE in idle mode.)
SpeedDepReselCfg
Ind is set to
NOT_CFG,
QHystSfMedium
does not need to be
set.

This parameter is
optional, depending
on the setting of
SpeedDepReselCfg
Ind.
If
No (Modifications
SpeedDepReselCfg
on this parameter
Ind is set to CFG,
Read & Write would affect cell N/A N/A
QHystSfHigh must
reselection of the
be set.
UE in idle mode.)
If
SpeedDepReselCfg
Ind is set to
NOT_CFG,
QHystSfHigh does
not need to be set.
 No (Modifications
on this parameter
None Read & Write will affect cell N/A N/A
reselection of the
UE in idle mode.)

This parameter is
optional, depending
on the setting of
SNonIntraSearchCf
gInd.
If
SNonIntraSearchCf No (Modifications
gInd is set to CFG, on this parameter
SNonIntraSearch Read & Write would affect cell N/A N/A
needs to be set. reselection of the
If UE in idle mode.)
SNonIntraSearchCf
gInd is set to
NOT_CFG,
SNonIntraSearch
does not need to be
set.
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write will affect cell N/A N/A
reselection of the
UE in idle mode.)
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
This parameter is
optional, depending
on the setting of
PMaxCfgInd. No (Modifications
If PMaxCfgInd is on this parameter
set to CFG, PMax Read & Write would affect cell N/A N/A
must be set. reselection of the
If PMaxCfgInd is UE in idle mode.)
set to NOT_CFG,
PMax does not
need to be set.

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

This parameter is
optional, depending
on the setting of
SIntraSearchCfgInd
.
If No (Modifications
SIntraSearchCfgInd on this parameter
is set to CFG, Read & Write would affect cell N/A N/A
SIntraSearch needs reselection of the
to be set. UE in idle mode.)
If
SIntraSearchCfgInd
is set to NOT_CFG,
SIntraSearch does
not need to be set.

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
This parameter is
optional, depending
on the setting of
MeasBandWidthCfg
Ind.
If
MeasBandWidthCfg No (Modifications
Ind is set to CFG, on this parameter
MeasBandWidth Read & Write would affect cell N/A N/A
must be set. reselection of the
If UE in idle mode.)
MeasBandWidthCfg
Ind is set to
NOT_CFG,
MeasBandWidth
does not need to be
set.

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn No (Modifications
d is set to CFG, on this parameter
TReselEutranSfMe Read & Write would affect cell N/A N/A
dium must be set. reselection of the
If UE in idle mode.)
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselEutranSfMe
dium does not need
to be set.
This parameter is
optional, depending
on the setting of the
SpeedStateSfCfgIn
d parameter.
If
SpeedStateSfCfgIn No (Modifications
d is set to CFG, on this parameter
TReselEutranSfHig Read & Write would affect cell N/A N/A
h must be set. reselection of the
If UE in idle mode.)
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselEutranSfHig
h does not need to
be set.
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

This parameter is
optional, depending
on the setting of
ThrshServLowQCfg
Ind.
If
No (Modifications
ThrshServLowQCfg
on this parameter
Ind is set to CFG,
Read & Write would affect cell N/A N/A
this parameter must
reselection of the
be set.
UE in idle mode.)
If
ThrshServLowQCfg
Ind is set to
NOT_CFG, this
parameter does not
need to be set.
If QQualMinCfgInd
is set to CFG, the
following cell
reselection
parameters in
compliance with
3GPP Release 9 in
SIB3 will be
set:SIntraSearchQ,
SNonIntraSearchQ,
SIntraSearch,SNonI
No (Modifications
ntraSearch and
on this parameter
QQualMin.
Read & Write would affect cell N/A N/A
If QQualMinCfgInd
reselection of the
is set to NOT_CFG,
UE in idle mode.)
the following cell
reselection
parameters in
compliance with
3GPP Release 9 in
SIB3 will not be
set:SIntraSearchQ,
SNonIntraSearchQ,
SIntraSearch,SNonI
ntraSearch and
QQualMin.

This parameter is
optional, depending
on the setting of
QQualMinCfgInd.
No (Modifications
If QQualMinCfgInd
on this parameter
is set to CFG, this
Read & Write would affect cell N/A N/A
parameter must be
reselection of the
set.
UE in idle mode.)
If QQualMinCfgInd
is set to NOT_CFG,
this parameter does
not need to be set.
None Read Only N/A N/A N/A

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

This parameter is
optional, depending
on the setting of
SysTimeCfgInd.
If SysTimeCfgInd is No (Modifications
set to CFG, on this parameter
CdmaEutraSyn Read & Write would affect cell N/A N/A
must be set. reselection of the
If SysTimeCfgInd is UE in idle mode.)
set to NOT_CFG,
CdmaEutraSyn
does not need to be
set.

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
This parameter is
optional, depending
on the setting of
SearchWndSizeCfg
Ind.
If
SearchWndSizeCfg No (Modifications
Ind is set to CFG, on this parameter
SearchWndSize Read & Write would affect cell N/A N/A
must be set. reselection of the
If UE in idle mode.)
SearchWndSizeCfg
Ind is set to
NOT_CFG,
SearchWndSize
does not need to be
set.

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

This parameter is
optional, depending
on the setting of
HrpdParaCfgInd.
If HrpdParaCfgInd
No (Modifications
is set to CFG,
on this parameter
HrpdCellReselectP
Read & Write would affect cell N/A N/A
aramCfgInd must
reselection of the
be set.
UE in idle mode.)
If HrpdParaCfgInd
is set to NOT_CFG,
HrpdCellReselectP
aramCfgInd does
not need to be set.
This parameter is
optional, depending
on the setting of the
HrpdCellReselectP
aramCfgInd
parameter.
If the
HrpdCellReselectP
No (Modifications
aramCfgInd
on this parameter
parameter is set to
Read & Write would affect cell N/A N/A
CFG, this
reselection of the
parameter must be
UE in idle mode.)
set.
If the
HrpdCellReselectP
aramCfgInd
parameter is set to
NOT_CFG, this
parameter does not
need to be set.
optional, depending
on the setting of
HrpdCellReselectP
aramCfgInd.
If
HrpdCellReselectP
aramCfgInd is set
to CFG,
SpeedStateSfCfgIn
d must be set.
If
HrpdCellReselectP
aramCfgInd is set
to NOT_CFG,
SpeedStateSfCfgIn
d does not need to
be set. No (Modifications
2 If on this parameter
SpeedStateSfCfgIn Read & Write would affect cell N/A N/A
d is set to CFG, the reselection of the
following UE in idle mode.)
parameters must be
set:
TReselCdmaHrpdSf
Medium and
TReselCdmaHrpdSf
High.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG, the
following
parameters do not
need to be set:
TReselCdmaHrpdSf
Medium and
TReselCdmaHrpdSf
This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn No (Modifications
d is set to CFG, on this parameter
TReselCdmaHprdSf Read & Write would affect cell N/A N/A
High must be set. reselection of the
If UE in idle mode.)
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselCdmaHprdSf
High does not need
to be set.
This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
No (Modifications
d is set to CFG,
on this parameter
TReselCdmaHrpdSf
Read & Write would affect cell N/A N/A
Medium must be
reselection of the
set.
UE in idle mode.)
If
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselCdmaHrpdSf
Medium does not
need to be set.

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
This parameter is
optional, depending
on the setting of
Cdma1XrttParaCfgI
nd.
If
Cdma1XrttParaCfgI
No (Modifications
nd is set to CFG,
on this parameter
Cdma1XrttLongCod
Read & Write would affect cell N/A N/A
eStateCfgInd must
reselection of the
be set.
UE in idle mode.)
If
Cdma1XrttParaCfgI
nd is set to
NOT_CFG,
Cdma1XrttLongCod
eStateCfgInd does
not need to be set.

This parameter is
optional, depending
on the setting of
Cdma1XrttParaCfgI
nd.
If
Cdma1XrttParaCfgI No (Modifications
nd is set to CFG, on this parameter
Cdma1XrttCellRese Read & Write would affect cell N/A N/A
lCfgInd must be set. reselection of the
If UE in idle mode.)
Cdma1XrttParaCfgI
nd is set to
NOT_CFG,
Cdma1XrttCellRese
lCfgInd does not
need to be set.
This parameter is
optional, depending
on the setting of the
Cdma1XrttCellRese
lCfgInd parameter.
If the
Cdma1XrttCellRese No (Modifications
lCfgInd parameter on this parameter
is set to CFG, this Read & Write would affect cell N/A N/A
parameter must be reselection of the
set. UE in idle mode.)
If the
Cdma1XrttCellRese
lCfgInd parameter
is set to NOT_CFG,
this parameter does
not need to be set.

This parameter is
optional, depending
on the setting of
Cdma1XrttCellRese
lCfgInd.
If
Cdma1XrttCellRese
lCfgInd is set to No (Modifications
CFG, on this parameter
Cdma1XrttSpeedSt Read & Write would affect cell N/A N/A
ateCfgInd must be reselection of the
set. UE in idle mode.)
If
Cdma1XrttCellRese
lCfgInd is set to
NOT_CFG,
Cdma1XrttSpeedSt
ateCfgInd does not
need to be set.
This parameter is
optional, depending
on the setting of
Cdma1XrttSpeedSt
ateCfgInd.
If
Cdma1XrttSpeedSt
No (Modifications
ateCfgInd is set to
on this parameter
CFG,
Read & Write would affect cell N/A N/A
Cdma1XrttSfMediu
reselection of the
m must be set.
UE in idle mode.)
If
Cdma1XrttSpeedSt
ateCfgInd is set to
NOT_CFG,
Cdma1XrttSfMediu
m does not need to
be set.

This parameter is
optional. Whether
to set this
parameter is
determined by the
parameter
Cdma1XrttSpeedSt
ateCfgInd.
When No (Modifications
Cdma1XrttSpeedSt on this parameter
ateCfgInd is set to Read & Write would affect cell N/A N/A
CFG, reselection of the
Cdma1XrttSfHigh UE in idle mode.)
needs to be set.
When
Cdma1XrttSpeedSt
ateCfgInd is set to
NOT_CFG,
Cdma1XrttSfHigh
does not need to be
set.

No (Modifications
on this parameter
None Read & Write will affect cell N/A N/A
reselection of the
UE in idle mode.)
This parameter is
optional, depending
on the setting of the
SupportDualRxCsfb
CfgInd parameter. If
the
No (Modifications
SupportDualRxCsfb
on this parameter
CfgInd parameter is
Read & Write will affect cell N/A N/A
set to CFG, this
reselection of the
parameter must be
UE in idle mode.)
set. If the
SupportDualRxCsfb
CfgInd parameter is
set to NOT_CFG,
this parameter does
not need to be set.

None Read Only N/A N/A N/A

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn No (Modifications
d is set to CFG, on this parameter
TReselGeranSfMed Read & Write would affect cell N/A N/A
ium must be set. reselection of the
If UE in idle mode.)
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselGeranSfMed
ium does not need
to be set.
This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn No (Modifications
d is set to CFG, on this parameter
TReselGeranSfHigh Read & Write would affect cell N/A N/A
must be set. reselection of the
If UE in idle mode.)
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselGeranSfHigh
does not need to be
set.

None Read Only N/A N/A N/A

 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

This parameter is
optional, depending
on the setting of the
SpeedStateSfCfgIn
d parameter.
If
SpeedStateSfCfgIn No (Modifications
d is set to CFG, on this parameter
TReselUtranSfMedi Read & Write would affect cell N/A N/A
um must be set. reselection of the
If UE in idle mode.)
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselUtranSfMedi
um does not need
to be set.
This parameter is
optional, depending
on the setting of the
SpeedStateSfCfgIn
d parameter.
If
SpeedStateSfCfgIn No (Modifications
d is set to CFG, on this parameter
TReselUtranSfHigh Read & Write would affect cell N/A N/A
must be set. reselection of the
If UE in idle mode.)
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselUtranSfHigh
does not need to be
set.

None Read Only N/A N/A N/A

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
selection of the UE
in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
selection of the UE
in idle mode.)
This parameter is
optional, depending
on the setting of
QQualMinOffsetCfg
Ind.
If
No (Modifications
QQualMinOffsetCfg
on this parameter
Ind is set to CFG,
Read & Write would affect cell N/A N/A
this parameter must
selection of the UE
be set.
in idle mode.)
If
QQualMinOffsetCfg
Ind is set to
NOT_CFG, this
parameter does not
need to be set.

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

SECTORID on
which SectorEqmId
Read Only N/A N/A N/A
depends must have
been configured.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Less than 0.1

None Read & Write Yes Cell
minute
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

CellId on which
SectorEqmGroupId
Read Only N/A N/A N/A
depends must have
been configured.

Less than 0.1

None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

If
TimingAdvCmdOpt
Switch is set to ON,
TACmdSendPeriod
can be configured
only when the GUI No (And no impact
value is Invalid or Read & Write on the UE in idle N/A N/A
less than or equal mode)
to the enumerated
value in the
following formula:
Floor(TimeAlignmen
tTimer/2-32).
If
TimingAdvCmdOpt
Switch is set to ON,
TACmdSendPeriod
can be configured
only when the GUI No (And no impact
value is Invalid or Read & Write on the UE in idle N/A N/A
less than or equal mode)
to the enumerated
value in the
following formula:
Floor(TimeAlignmen
tTimer/2-32).
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If
TimingAdvCmdOpt
Switch is set to ON,
TACmdSendPeriod
can be configured
only when the GUI No (And no impact
value is Invalid or Read & Write on the UE in idle N/A N/A
less than or equal mode)
to the enumerated
value in the
following formula:
Floor(TimeAlignmen
tTimer/2-32).
If the
TimingResOptSwitc
h in
TimeAlignmentTime
No (And no impact
r MO is set to OFF,
Read & Write on the UE in idle N/A N/A
the
mode)
TaEnhancePuschD
mrs under the
TaEnhance must be
set to OFF.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
Cell MO is set to
CELL_TDD, the
TaEnhancePuschD
mrs under the
TaEnhance must be
set to OFF.
If the HoppingMode
in PUSCHCfg MO
is set to
INTRA_AND_INTE
R_SUB_FRAME,th
e
TaEnhancePuschD
mrs under the
TaEnhance must be
set to OFF.
If the
HighSpeedFlag in No (And no impact
Cell MO is set to Read & Write on the UE in idle N/A N/A
HIGH_SPEED or mode)
ULTRA_HIGH_SPE
ED or
EXTRA_HIGH_SPE
ED,the
TaEnhancePuschD
mrs under the
TaEnhance must be
set to OFF.
If the
TimingResOptSwitc
h in
TimeAlignmentTime
r MO is set to OFF,
the
TaEnhancePuschD
mrs under the
TaEnhance must be

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

In the Cell MO, the

value of CellName
is a string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
No (And no impact
quotation marks ("),
Read & Write on the UE in idle N/A N/A
commas (,),
mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+++), two or
more consecutive
spaces, and two or
more consecutive
percentage signs
(%).
CsgInd in a Cell MO
Less than 0.1
must be set to Read & Write Yes Cell
minute
BOOLEAN_FALSE.

SSP6, or SSP7;
(4) If UlCyclicPrefix
is set to
NORMAL_CP and
DlCyclicPrefix is set
to EXTENDED_CP,
SpecialSubframePa
tterns can be set to
SSP3, SSP4,
SSP5, or SSP6.
In the Cell MO, if
FddTddInd is
CELL_TDD and
DlBandWidth is
CELL_BW_N25,
UlCyclicPrefix and
DlCyclicPrefix must
be set
Less than 0.1
NORMAL_CP. Read & Write Yes Cell
minute
If MultiRruCellFlag
in a Cell MO is set
to
BOOLEAN_TRUE
and
MultiRruCellMode
in a Cell MO is set
to
DIGITAL_COMBINA
TION,
DlCyclicPrefix and
UlCyclicPrefix in
Cell MO must be
set to
NORMAL_CP.
In a Cell MO, if
FddTddInd,
MultiRruCellFlag
SSP6, or SSP7;
(4) If UlCyclicPrefix
is set to
NORMAL_CP and
DlCyclicPrefix is set
to EXTENDED_CP,
SpecialSubframePa
tterns can be set to
SSP3, SSP4,
SSP5, or SSP6.
In the Cell MO, if
FddTddInd is
CELL_TDD and
DlBandWidth is
CELL_BW_N25,
UlCyclicPrefix and
DlCyclicPrefix must
be set
Less than 0.1
NORMAL_CP. Read & Write Yes Cell
minute
If MultiRruCellFlag
in a Cell MO is set
to
BOOLEAN_TRUE
and
MultiRruCellMode
in a Cell MO is set
to
DIGITAL_COMBINA
TION,
DlCyclicPrefix and
UlCyclicPrefix in
Cell MO must be
set to
NORMAL_CP.
In a Cell MO, if
FddTddInd,
MultiRruCellFlag
In a Cell MO,
DlEarfcn must be
set based on the
setting of
FreqBand. For
details, see 3GPP
TS 36.104.
In a Cell MO, if
FreqBand is set to
29, UlEarfcnCfgInd
must be set to
NOT_CFG.
In a Cell MO, if
FreqBand is set to
29, WorkMode must
be set to DL_ONLY.
In a Cell MO,
Less than 0.1
UlEarfcn must be Read & Write Yes Cell
minute
set based on the
setting of
FreqBand. For
details, see 3GPP
TS 36.104.
In a Cell MO,
SubframeAssignme
nt set to SA2,
DlCyclicPrefixand
UlCyclicPrefix must
be set to
NORMAL_CP and
FreqBand set to 39
if
SpecialSubframePa
tterns is set to
SSP9.

In a Cell MO, if
FddTddInd is set to
CELL_TDD and
UlEarfcnCfgInd is
set to CFG,
DlEarfcn and
UlEarfcn must be Less than 0.1
Read & Write Yes Cell
set to the same minute
value.
In a Cell MO, if
FreqBand is set to
29, UlEarfcnCfgInd
must be set to
NOT_CFG.
In a Cell MO, if
FddTddInd is set to
CELL_TDD and
UlEarfcnCfgInd is
set to CFG,
DlEarfcn and
UlEarfcn must be
set to the same
value.
In a Cell MO,
UlEarfcn must be
set based on the Less than 0.1
Read & Write Yes Cell
setting of minute
FreqBand. For
details, see 3GPP
TS 36.104.
If UlEarfcnCfgInd is
set to CFG,
UlEarfcn must be
set.
If UlEarfcnCfgInd is
set to NOT_CFG,
UlEarfcn does not
need to be set.

In a Cell MO,
DlEarfcn must be
set based on the
setting of
FreqBand. For
details, see 3GPP
TS 36.104.
In a Cell MO, if Less than 0.1
Read & Write Yes Cell
FddTddInd is set to minute
CELL_TDD and
UlEarfcnCfgInd is
set to CFG,
DlEarfcn and
UlEarfcn must be
set to the same
value.
BOOLEAN_TRUE
and
MultiRruCellMode
in a Cell MO is set
to
DIGITAL_COMBINA
TION, DlBandWidth
and UlBandWidth in
Cell MO must be
set to
CELL_BW_N25,
CELL_BW_N50,
CELL_BW_N75 or
CELL_BW_N100.
When the
FddTddInd is set to
CELL_FDD and
AirCellFlag in Cell
MO is set to Less than 0.1
Read & Write Yes Cell
BOOLEAN_TRUE, minute
DlBandWidth and
UlBandWidth must
be set to a value in
one of the following
combinations(DlBan
dWidth/UlBandWidt
h):
CELL_BW_N15/CE
LL_BW_N15;
CELL_BW_N15/CE
LL_BW_N25;
CELL_BW_N15/CE
LL_BW_N50;
CELL_BW_N25/CE
LL_BW_N15;
CELL_BW_N25/CE
LL_BW_N25;
CELL_BW_N25/CE
CELL_FDD, the
actual value range
of
CPRICompression
varies depending
on the DlBandWidth
parameter setting. If
DlBandWidth is set
to CELL_BW_N6 or
CELL_BW_N15,
CPRICompression
must be set to
NO_COMPRESSIO
N. If DlBandWidth is
set to
CELL_BW_N25,
CPRICompression
can be set to
NO_COMPRESSIO Less than 0.1
Read & Write Yes Cell
N or minute
NORMAL_COMPR
ESSION. If
DlBandWidth is set
to any other value,
CPRICompression
can be set to any
value in its value
range.
If MultiRruCellFlag
in a Cell MO is set
to
BOOLEAN_TRUE
and
MultiRruCellMode
in a Cell MO is set
to
DIGITAL_COMBINA
TION, DlBandWidth

CellId must have a

unique value in Less than 0.1
Read & Write Yes Cell
each Cell MO under minute
the same eNodeB.
ranges: 4 to 33, 53
to 70, 79 to 84, 102
to 108, 117 to 132,
154 to 181, 199 to
220, 229 to 230,
248 to 258, 267 to
278, 304 to 327,
345 to 370, 394 to
408, 417 to 424,
442 to 445, 454 to
473, and 492 to
503;
If
CustomizedDLBand
Width is set to a
value in the range
of 89 to 95,
PhyCellId must be
Less than 0.1
set to a value in Read & Write Yes Cell
minute
one of the following
ranges: 4 to 20, 36
to 38, 68 to 70, 79
to 85, 104 to 117,
132 to 134, 164 to
170, 179 to 181,
204 to 213, 229 to
230, 244 to 245,
260 to 270, 292 to
295, 304 to 309,
340 to 341, 356 to
370, 388 to 395,
404 to 405, 420,
436 to 437, 454 to
469, and 484 to
495;
If
CustomizedDLBand

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
and
MultiRruCellMode
are set to
CELL_ACTIVE,
BOOLEAN_TRUE,
and
CELL_COMBINATI
ON, respectively,
TxRxMode must be
set to 1T1R, 2T2R
or 4T4R or 8T8R.
In a Cell MO, if
CellActiveState,
MultiRruCellFlag,
and
MultiRruCellMode
are set to
CELL_ACTIVE,
BOOLEAN_TRUE, Until the cell is
Read & Write Yes Cell
and activated
TWO_RRU_COMBI
NATION,
respectively,
TxRxMode must be
set to 2T2R.
In a Cell MO, if
CellActiveState,
MultiRruCellFlag,
and
MultiRruCellMode
are set to
CELL_ACTIVE,
BOOLEAN_TRUE,
and
DIGITAL_COMBINA
TION, respectively,
TxRxMode must be
set to 1T1R or
 Until the cell is
None Read & Write Yes Cell
unblocked

This parameter
needs to be
No (And no impact
specified only when
Read & Write on the UE in idle N/A N/A
the middle-priority
mode)
blocking is
performed.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_FDD,
4T4R, and
CRS_PORT_4,
respectively,
CrsPortMap must
be set to
NOT_CFG,
4T4P_0213,
4T4P_0231,
4T4P_0123,
4T4P_0132,
4T4P_0312, or
4T4P_0321.
In a Cell MO, if
Less than 0.1
MultiRruCellFlag is Read & Write Yes Cell
minute
set to
BOOLEAN_TRUE
and FddTddIndis
set to CELL_TDD,
or MultiRruCellFlag
is set to
BOOLEAN_TRUE,
and FddTddInd is
set to CELL_FDD
and
MultiRruCellModeis
not set to SFN,
CrsPortMap must
be set to
NOT_CFG.
In a Cell MO, if
FddTddInd,
TxRxMode, and
is set to 0,
SubframeAssignme
nt can be set to
SA0, SA1, SA2,
SA3, or SA5;
(2) If PreambleFmt
is set to 1,
SubframeAssignme
nt can be set to
SA0, SA1, or SA3;
(3) If PreambleFmt
is set to 2,
SubframeAssignme
nt can be set to
SA0, SA1, or SA3;
(4) If PreambleFmt
is set to 3,
SubframeAssignme
nt can be set to Less than 0.1
Read & Write Yes Cell
SA0 or SA3; minute
(5) If PreambleFmt
is set to 4,
SubframeAssignme
nt can be set to
SA0, SA1, SA2,
SA3, or SA5.
If FddTddInd is set
to CELL_TDD,
SubframeAssignme
nt must be set.
If FddTddInd is set
to CELL_FDD,
SubframeAssignme
nt does not need to
be set.
The
MultiCellShareMod
e parameter in the
(2) If UlCyclicPrefix
and DlCyclicPrefix
are both set to
EXTENDED_CP,
SpecialSubframePa
tterns can be set to
SSP3, SSP4,
SSP5, or SSP6;
(3) If UlCyclicPrefix
is set to
EXTENDED_CP
and DlCyclicPrefix
is set to
NORMAL_CP,
SpecialSubframePa
tterns can be set to
SSP4, SSP5,
SSP6, or SSP7;
Less than 0.1
(4) If UlCyclicPrefix Read & Write Yes Cell
minute
is set to
NORMAL_CP and
DlCyclicPrefix is set
to EXTENDED_CP,
SpecialSubframePa
tterns can be set to
SSP3, SSP4,
SSP5, or SSP6.
If FddTddInd is set
to CELL_TDD,
SpecialSubframePa
tterns must be set.
If FddTddInd is set
to CELL_FDD,
SpecialSubframePa
tterns does not
need to be set.
In a Cell MO, if
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
RootSequenceIdx
is 42~797;
(5) 2600m(8530ft) <
CellRadius <=
3500m(11483ft): the
value range of
RootSequenceIdx
is 52~786;
(6) 3500m(11483ft)
< CellRadius <=
4300m(14107ft):
the value range of
RootSequenceIdx
is 64~779;
(7) 4300m(14107ft)
< CellRadius <=
5500m(18044ft):
the value range of
Less than 0.1
RootSequenceIdx Read & Write Yes Cell
minute
is 76~765;
(8) 5500m(18044ft)
< CellRadius <=
6800m(22309ft):
the value range of
RootSequenceIdx
is 90~747;
(9) 6800m(22309ft)
< CellRadius <=
8600m(28215ft):
the value range of
RootSequenceIdx
is 116~731;
(10)
8600m(28215ft) <
CellRadius <=
10600m(34776ft):
the value range of
RootSequenceIdx
is 116~731;
(10)
8600m(28215ft) <
CellRadius <=
10600m(34776ft):
the value range of
RootSequenceIdx
is 136~706;
(11)
10600m(34776ft) <
CellRadius <=
13200m(43307ft):
the value range of
RootSequenceIdx
is 168~676;
(12)
13200m(43307ft) <
CellRadius <= Less than 0.1
Read & Write Yes Cell
17200m(56430ft): minute
the value range of
RootSequenceIdx
is 204~602;
(13)
17200m(56430ft) <
CellRadius <=
21500m(70537ft):
the value range of
RootSequenceIdx
is 264~566;
(14)
21500m(70537ft) <
CellRadius <=
27800m(91206ft):
the value range of
RootSequenceIdx
is 328~498;
(15)
(8) 5500m(18044ft)
< CellRadius <=
6800m(22309ft):
the value range of
RootSequenceIdx
is 90~747;
(9) 6800m(22309ft)
< CellRadius <=
8600m(28215ft):
the value range of
RootSequenceIdx
is 116~731;
(10)
8600m(28215ft) <
CellRadius <=
10600m(34776ft):
the value range of
RootSequenceIdx
is 136~706; Less than 0.1
Read & Write Yes Cell
(11) minute
10600m(34776ft) <
CellRadius <=
13200m(43307ft):
the value range of
RootSequenceIdx
is 168~676;
(12)
13200m(43307ft) <
CellRadius <=
17200m(56430ft):
the value range of
RootSequenceIdx
is 204~602;
(13)
17200m(56430ft) <
CellRadius <=
21500m(70537ft):
the value range of
RootSequenceIdx
is 64~779;
(7) 4300m(14107ft)
< CellRadius <=
5500m(18044ft):
the value range of
RootSequenceIdx
is 76~765;
(8) 5500m(18044ft)
< CellRadius <=
6800m(22309ft):
the value range of
RootSequenceIdx
is 90~747;
(9) 6800m(22309ft)
< CellRadius <=
8600m(28215ft):
the value range of
Less than 0.1
RootSequenceIdx Read & Write Yes Cell
minute
is 116~731;
(10)
8600m(28215ft) <
CellRadius <=
10600m(34776ft):
the value range of
RootSequenceIdx
is 136~706;
(11)
10600m(34776ft) <
CellRadius <=
13200m(43307ft):
the value range of
RootSequenceIdx
is 168~676;
(12)
13200m(43307ft) <
CellRadius <=
to 97, 102, 110,
117, 127 to 132,
140 to 147, 156,
171 to 172, 177 to
178, 190 to 194,
202, 209, 217 to
222, 232 to 235,
240, 255, 265 to
270, 278 to 285,
294, 309 to 310,
315 to 316, 327 to
332, 340, 347, 355
to 360, 370 to 372,
377 to 378, 393,
402 to 408, 416 to
422, 432, 447, 452
to 454, 465 to 470,
478, 485, and 493
Less than 0.1
to 497. Read & Write Yes Cell
minute
In a Cell MO, when
CustomizedBandWi
dthCfgInd is set to
CFG:
If UlBandWidth is
set to
CELL_BW_N6,
CustomizedULBand
Width must be set
to a value in the
range of 12 to 14;
If UlBandWidth is
set to
CELL_BW_N25,
CustomizedULBand
Width must be set
to a value in the
range of 44 to 50;
CELL_BW_N25,
CustomizedULBand
Width must be set
to a value in the
range of 44 to 50;
If UlBandWidth is
set to
CELL_BW_N50,
CustomizedULBand
Width must be set
to a value in the
range of 89 to 100;
If UlBandWidth is
set to
CELL_BW_N75,
CustomizedULBand
Width must be set
to a value in the
range of 139 to Less than 0.1
Read & Write Yes Cell
150; minute
If UlBandWidth is
set to
CELL_BW_N100,
CustomizedULBand
Width must be set
to a value in the
range of 183 to
200.
In a Cell MO, if
CustomizedBandWi
dthCfgInd is set to
CFG,
CustomizedULBand
Width and
CustomizedDLBand
Width cannot both
be set to 14, 50,
100, 150, or 200.
503;
If
CustomizedDLBand
Width is set to a
value in the range
of 89 to 95,
PhyCellId must be
set to a value in
one of the following
ranges: 4 to 20, 36
to 38, 68 to 70, 79
to 85, 104 to 117,
132 to 134, 164 to
170, 179 to 181,
204 to 213, 229 to
230, 244 to 245,
260 to 270, 292 to
295, 304 to 309,
340 to 341, 356 to Less than 0.1
Read & Write Yes Cell
370, 388 to 395, minute
404 to 405, 420,
436 to 437, 454 to
469, and 484 to
495;
If
CustomizedDLBand
Width is set to a
value in the range
of 44 to 47,
PhyCellId must be
set to a value in
one of the following
ranges: 2 to 10, 18,
33 to 35, 40, 52 to
56, 71, 79 to 85, 94
to 97, 102, 110,
117, 127 to 132,
140 to 147, 156,

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
EmergencyAreaId
is optional,
depending on the
setting of
EmergencyAreaIdC
fgInd.
If
EmergencyAreaIdC
No (And no impact
fgInd is set to CFG,
Read & Write on the UE in idle N/A N/A
EmergencyAreaId
mode)
must be set.
If
EmergencyAreaIdC
fgInd is set to
NOT_CFG,
EmergencyAreaId
does not need to be
set.

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

When the
AirCellFlag in Cell
MO is
BOOLEAN_TRUE,
the range of the
UePowerMax is
-27~36.
When the
AirCellFlag in Cell
MO is not
No (Modifications
BOOLEAN_TRUE,
on this parameter
the range of the
Read & Write would affect cell N/A N/A
UePowerMax is
reselection of the
-30~33.
UE in idle mode.)
If
UePowerMaxCfgInd
is set to CFG,
UePowerMax must
be set.
If
UePowerMaxCfgInd
is set to NOT_CFG,
UePowerMax does
not need to be set.
MultiRruCellMode
are set to
CELL_ACTIVE,
BOOLEAN_TRUE,
and
DIGITAL_COMBINA
TION, respectively,
TxRxMode must be
set to 1T1R or
2T2R.
In a Cell MO, if
CellActiveState is
CELL_ACTIVE,
FddTddInd is set to
CELL_FDD, and
CPRICompression
is set to
NORMAL_COMPR
ESSION, Less than 0.1
Read & Write Yes Cell
TxRxMode must be minute
set to 1T1R, 1T2R,
2T2R, 2T4R, 4T4R,
2T8R, or 4T8R.
In a Cell MO, if
FddTddInd is set to
TDD,
MultiRruCellFlag
and
MultiRruCellMode
are set to
BOOLEAN_TRUE
and
MPRU_AGGREGA
TION, respectively,
TxRxMode must be
set to 2T2R.
In a Cell MO, if
FddTddInd,
CellActiveState,
MultiRruCellFlag,
and
MultiRruCellMode
are set to
CELL_ACTIVE,
BOOLEAN_TRUE,
and
DIGITAL_COMBINA
TION, respectively,
TxRxMode must be
set to 1T1R or
2T2R.
In a Cell MO, if
CellActiveState is
CELL_ACTIVE,
FddTddInd is set to
CELL_FDD, and
CPRICompression Less than 0.1
Read & Write Yes Cell
is set to minute
NORMAL_COMPR
ESSION,
TxRxMode must be
set to 1T1R, 1T2R,
2T2R, 2T4R, 4T4R,
2T8R, or 4T8R.
In a Cell MO, if
FddTddInd is set to
TDD,
MultiRruCellFlag
and
MultiRruCellMode
are set to
BOOLEAN_TRUE
and
MPRU_AGGREGA
TION, respectively,
TxRxMode must be
must be set
NO_COMPRESSIO
N.
In the Cell MO, if
FddTddInd is
CELL_TDD and
DlBandWidth is
CELL_BW_N50,
CPRICompression
can be set to
NO_COMPRESSIO
N or
NORMAL_COMPR
ESSION.
In a Cell MO, when
FddTddInd is set to
CELL_FDD, the
actual value range
of Less than 0.1
Read & Write Yes Cell
CPRICompression minute
varies depending
on the DlBandWidth
parameter setting. If
DlBandWidth is set
to CELL_BW_N6 or
CELL_BW_N15,
CPRICompression
must be set to
NO_COMPRESSIO
N. If DlBandWidth is
set to
CELL_BW_N25,
CPRICompression
can be set to
NO_COMPRESSIO
N or
NORMAL_COMPR
ESSION. If
If the
MultiRruCellMode
parameter is set to
SFN, the
SectorEqmNum
parameter must be
set. Less than 0.1
Read & Write Yes Cell
If the minute
MultiRruCellMode
parameter is not set
to SFN, the
SectorEqmNum
parameter does not
need to be set.
CELL_BW_N15/CE
LL_BW_N25;
CELL_BW_N15/CE
LL_BW_N50;
CELL_BW_N25/CE
LL_BW_N15;
CELL_BW_N25/CE
LL_BW_N25;
CELL_BW_N25/CE
LL_BW_N50;
CELL_BW_N50/CE
LL_BW_N15;
CELL_BW_N50/CE
LL_BW_N25;
CELL_BW_N50/CE
LL_BW_N50;
CELL_BW_N100/C
ELL_BW_N25;
Less than 0.1
CELL_BW_N100/C Read & Write Yes Cell
minute
ELL_BW_N50.
In a Cell MO, if
AirCellFlag is set to
BOOLEAN_TRUE,
RootSequenceIdx
must be set to a
value smaller than
or equal to 69.
When the
AirCellFlag in Cell
MO is
BOOLEAN_TRUE,
the range of the
UePowerMax is
-27~36.
When the
AirCellFlag in Cell
MO is not
be set to
NOT_CFG,
4T2P_0011,
4T2P_0101, or
4T2P_0110.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_TDD,
8T8R, and
CRS_PORT_2,
respectively,
CrsPortMap must
be set to
NOT_CFG,
8T2P_00001111,
8T2P_00110011, or
Less than 0.1
8T2P_01010101. Read & Write Yes Cell
minute
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_TDD,
4T4R, and
CRS_PORT_4,
respectively,
CrsPortMap must
be set to
NOT_CFG,
4T4P_0213,
4T4P_0231,
4T4P_0123, or
4T4P_0132.
In a Cell MO, if
FddTddInd,
TxRxMode, and
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_FDD,
4T4R, and
CRS_PORT_2,
respectively,
CrsPortMap must
be set to
NOT_CFG,
4T2P_0011,
4T2P_0101, or
4T2P_0110.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
Less than 0.1
to CELL_TDD, Read & Write Yes Cell
minute
4T4R, and
CRS_PORT_1,
respectively,
CrsPortMap must
be set to
NOT_CFG.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_TDD,
8T8R, and
CRS_PORT_1,
respectively,
CrsPortMap must
be set to
NOT_CFG.
In a Cell MO, if
No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In a Cell MO, if
FddTddInd and
WorkMode are set
to CELL_FDD and
DL_ONLY,
respectively,
DlBandWidth must
be set to
CELL_BW_N25,
CELL_BW_N50,
Less than 0.1
CELL_BW_N75, or Read & Write Yes Cell
minute
CELL_BW_N100.
In a Cell MO,
WorkMode must be
set to UL_DL if
FddTddInd is set to
CELL_TDD.
In a Cell MO, if
FreqBand is set to
29, WorkMode must
be set to DL_ONLY.

In a Cell MO,
MultiRruCellFlag
set to
BOOLEAN_TRUE
and
MultiRruCellMode
set to SFN or
MPRU_AGGREGA Less than 0.1
Read & Write Yes Cell
TION, or minute
MultiRruCellFlag
set to
BOOLEAN_FALSE
if
EuCellStandbyMod
e is set to
STANDBY.
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_TDD,
8T8R, and
CRS_PORT_1,
respectively,
CrsPortMap must
be set to
NOT_CFG.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_TDD,
4T4R, and
CRS_PORT_2,
respectively,
Less than 0.1
CrsPortMap must Read & Write Yes Cell
minute
be set to
NOT_CFG,
4T2P_0011,
4T2P_0101, or
4T2P_0110.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_TDD,
8T8R, and
CRS_PORT_2,
respectively,
CrsPortMap must
be set to
NOT_CFG,
8T2P_00001111,
8T2P_00110011, or
 Less than 0.1
None Read & Write Yes Cell
minute
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

Less than 0.1

None Read & Write Yes Cell
minute
8T8R.
The
MultiCellShareMod
e parameter in the
Cell MO can be set
to SPLIT only if the
FddTddInd
parameter in the
Cell MO is set to
CELL_TDD.
The
MultiCellShareMod
e parameter in the
Cell MO can be set
to SPLIT only if the
HighSpeedFlag
parameter in the
Cell MO is set to
LOW_SPEED. Less than 0.1
Read & Write Yes Cell
The minute
MultiCellShareMod
e parameter in the
Cell MO can be set
to SPLIT only if the
SubframeAssignme
nt parameter in the
Cell MO is set to
SA1 or SA2.
The
MultiCellShareMod
e parameter in the
Cell MO can be set
to SPLIT only if the
MultiRruCellFlag
parameter in the
Cell MO is set to
BOOLEAN_FALSE.
The

SECTORID on
which SectorEqmId
Read Only N/A N/A N/A
depends must have
been configured.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

Less than 0.1

None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
SECTORID on
which SectorEqmId
Read Only N/A N/A N/A
depends must have
been configured.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

Less than 0.1

None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write Yes N/A N/A

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

In the CellBackOff
MO, the
RBPriMcsSelectSto
pPrbThd parameter No (And no impact
must be set to a Read & Write on the UE in idle N/A N/A
value smaller than mode)
that of the
InterFreqBackoffPrb
Thd parameter.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the CellBackOff
MO, the
RBPriMcsSelectTrig
PrbThd parameter No (And no impact
must be set to a Read & Write on the UE in idle N/A N/A
value smaller than mode)
that of the
RBPriMcsSelectSto
pPrbThd parameter.
In the CellBackOff
MO, the
RBPriMcsSelectTrig
PrbThd parameter
must be set to a
value smaller than
that of the
RBPriMcsSelectSto
No (And no impact
pPrbThd parameter.
Read & Write on the UE in idle N/A N/A
In the CellBackOff
mode)
MO, the
RBPriMcsSelectSto
pPrbThd parameter
must be set to a
value smaller than
that of the
InterFreqBackoffPrb
Thd parameter.
In the CellBackOff
MO, the
LowestEffDlMcsThd
parameter must be No (And no impact
set to a value Read & Write on the UE in idle N/A N/A
smaller than or mode)
equal to that of the
LowEffDlMcsThd
parameter.

In the CellBackOff
MO, the
LowestEffDlMcsThd
parameter must be No (And no impact
set to a value Read & Write on the UE in idle N/A N/A
smaller than or mode)
equal to that of the
LowEffDlMcsThd
parameter.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the CellBackOff
MO, the
LowestEffUlMcsThd
parameter must be No (And no impact
set to a value Read & Write on the UE in idle N/A N/A
smaller than or mode)
equal to that of the
LowEffUlMcsThd
parameter.

In the CellBackOff
MO, the
LowestEffUlMcsThd
parameter must be No (And no impact
set to a value Read & Write on the UE in idle N/A N/A
smaller than or mode)
equal to that of the
LowEffUlMcsThd
parameter.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

If the CsiRsSwitch
in
CellCsiRsParaCfg
MO is set to
ADAPTIVE_CFG,
The value of
No (And no impact
CsiRsConfigUserRa
Read & Write on the UE in idle N/A N/A
tioTh must be
mode)
greater than the
value of
CsiRsUnconfigUser
RatioTh in the
CellCsiRsParaCfg
MO.

Less than 0.1

None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If the CsiRsSwitch
in
CellCsiRsParaCfg
MO is set to
ADAPTIVE_CFG,
The value of
No (And no impact
CsiRsConfigUserRa
Read & Write on the UE in idle N/A N/A
tioTh must be
mode)
greater than the
value of
CsiRsUnconfigUser
RatioTh in the
CellCsiRsParaCfg
MO.
If the CsiRsSwitch
in
CellCsiRsParaCfg
MO is set to
ADAPTIVE_CFG,
The value of
No (And no impact
CsiRsConfigUserRa
Read & Write on the UE in idle N/A N/A
tioTh must be
mode)
greater than the
value of
CsiRsUnconfigUser
RatioTh in the
CellCsiRsParaCfg
MO.

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute
 Less than 0.1
None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
CellDynAcBarAlgoP
ara MO,
No (And no impact
DynAcBarTriggerTh
Read & Write on the UE in idle N/A N/A
d must be greater
mode)
than
DynAcBarCancelTh
d.
In the
CellDynAcBarAlgoP
ara MO,
No (And no impact
DynAcBarTriggerTh
Read & Write on the UE in idle N/A N/A
d must be greater
mode)
than
DynAcBarCancelTh
d.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

A smaller value of
this parameter
results in a higher
probability that
macro-micro
associations are
frequently updated
due to the impact
exerted by a
minority of UEs and
UEs on networks No (And no impact
experience Read & Write on the UE in idle N/A N/A
performance mode)
deterioration. A
larger value of this
parameter results in
a lower probability
of reflecting the
actual network
condition changes
and achieving the
optimal effect of
TDM eICIC.
None Read Only N/A N/A N/A

None Read & Write Yes Cell 0.1

None Read & Write Yes Cell 0.1

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If the
LowPwrSwitch
parameter is set to
ON, the
LowPwrOrder
parameter must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If the
mode)
LowPwrSwitch
parameter is set to
OFF, the
LowPwrOrder
parameter does not
need to be set.

If the LowPwrOrder
parameter is set to
OFF, the StartTime
parameter must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If the LowPwrOrder
mode)
parameter is set to
ON, the StartTime
parameter does not
need to be set.

If the LowPwrOrder
parameter is set to
OFF, the StopTime
parameter must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If the LowPwrOrder
mode)
parameter is set to
ON, the StopTime
parameter does not
need to be set.
If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
CellUsedPwrReduc
eTimeLen
parameter must be
set. No (And no impact
If the Read & Write on the UE in idle N/A N/A
BakPwrSavPolicy mode)
parameter is not set
to CUSTOMIZED,
the
CellUsedPwrReduc
eTimeLen
parameter does not
need to be set.

If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
RsPwrReduceTime
Len parameter
must be set.
No (And no impact
If the
Read & Write on the UE in idle N/A N/A
BakPwrSavPolicy
mode)
parameter is not set
to CUSTOMIZED,
the
RsPwrReduceTime
Len parameter
does not need to be
set.

If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
RfShutDownTimeLe
n parameter must
be set. No (And no impact
If the Read & Write on the UE in idle N/A N/A
BakPwrSavPolicy mode)
parameter is not set
to CUSTOMIZED,
the
RfShutDownTimeLe
n parameter does
not need to be set.
If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
CellUsedPwrRatio
parameter must be
set. No (And no impact
If the Read & Write on the UE in idle N/A N/A
BakPwrSavPolicy mode)
parameter is not set
to CUSTOMIZED,
the
CellUsedPwrRatio
parameter does not
need to be set.

If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
RsPwrAdjOffset
parameter must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If the
mode)
BakPwrSavPolicy
parameter is not set
to CUSTOMIZED,
the RsPwrAdjOffset
parameter does not
need to be set.
If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
EnterTimeLen
parameter must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If the
mode)
BakPwrSavPolicy
parameter is not set
to CUSTOMIZED,
the EnterTimeLen
parameter does not
need to be set.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the CellMro MO,
if CioAdjLimitCfgInd
is set to CFG,
CioAdjLowerLimit
must be smaller
than
CioAdjUpperLimit.
No (And no impact
If CioAdjLimitCfgInd
Read & Write on the UE in idle N/A N/A
is set to CFG,
mode)
CioAdjUpperLimit
must be set.
If CioAdjLimitCfgInd
is set to NOT_CFG,
CioAdjUpperLimit
does not need to be
set.

In the CellMro MO,

if CioAdjLimitCfgInd
is set to CFG,
CioAdjLowerLimit
must be smaller
than
CioAdjUpperLimit.
No (And no impact
If CioAdjLimitCfgInd
Read & Write on the UE in idle N/A N/A
is set to CFG,
mode)
CioAdjLowerLimit
must be set.
If CioAdjLimitCfgInd
is set to NOT_CFG,
CioAdjLowerLimit
does not need to be
set.
In the CellMro,
InterFreqA2RsrpLo
No (And no impact
wLimitmust be
Read & Write on the UE in idle N/A N/A
lower
mode)
thanInterFreqA2Rsr
pUpLimit.

In the CellMro,
InterFreqA2RsrpLo
No (And no impact
wLimitmust be
Read & Write on the UE in idle N/A N/A
lower
mode)
thanInterFreqA2Rsr
pUpLimit.

In the CellMro,
A3InterFreqA2Rsrp
No (And no impact
LowLimitmust be
Read & Write on the UE in idle N/A N/A
lower
mode)
thanA3InterFreqA2
RsrpUpLimit.

In the CellMro,
A3InterFreqA2Rsrp
No (And no impact
LowLimitmust be
Read & Write on the UE in idle N/A N/A
lower
mode)
thanA3InterFreqA2
RsrpUpLimit.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A
None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

In the CellRacThd
MO,
GoldServiceArpThd No (And no impact
must be smaller Read & Write on the UE in idle N/A N/A
than mode)
SilverServiceArpTh
d.
In the CellRacThd
MO,
GoldServiceArpThd No (And no impact
must be smaller Read & Write on the UE in idle N/A N/A
than mode)
SilverServiceArpTh
d.

In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci1HoThd must be
smaller than or No (And no impact
equal to 100. Read & Write on the UE in idle N/A N/A
In the CellRacThd mode)
MO, the sum of
Qci1CongThd and
CongRelOffset
must be smaller
than Qci1HoThd.
In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci2HoThd must be
smaller than or No (And no impact
equal to 100. Read & Write on the UE in idle N/A N/A
In the CellRacThd mode)
MO, the sum of
Qci2CongThd and
CongRelOffset
must be smaller
than Qci2HoThd.

In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci3HoThd must be
smaller than or No (And no impact
equal to 100. Read & Write on the UE in idle N/A N/A
In the CellRacThd mode)
MO, the sum of
Qci3CongThd and
CongRelOffset
must be smaller
than Qci3HoThd.
In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci4HoThd must be
smaller than or No (And no impact
equal to 100. Read & Write on the UE in idle N/A N/A
In the CellRacThd mode)
MO, the sum of
Qci4CongThd and
CongRelOffset
must be smaller
than Qci4HoThd.

In the CellRacThd
MO,
NewGoldServiceOff No (And no impact
set must be smaller Read & Write on the UE in idle N/A N/A
than or equal to mode)
NewSilverServiceOf
fset.
In the CellRacThd
MO,
NewGoldServiceOff
set must be smaller
than or equal to
NewSilverServiceOf
No (And no impact
fset.
Read & Write on the UE in idle N/A N/A
In the CellRacThd
mode)
MO,
NewSilverServiceOf
fset must be smaller
than or equal to
NewCopperService
Offset.
In the CellRacThd
MO,
NewSilverServiceOf
fset must be smaller
than or equal to
NewCopperService
Offset.
In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci1HoThd must be
smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
NewCopperService No (And no impact
Offset and Read & Write on the UE in idle N/A N/A
Qci2HoThd must be mode)
smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci3HoThd must be
smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci4HoThd must be
smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
No (And no impact
Qci1CongThd and
Read & Write on the UE in idle N/A N/A
CongRelOffset
mode)
must be smaller
than Qci1HoThd.
In the CellRacThd
MO, the sum of
No (And no impact
Qci2CongThd and
Read & Write on the UE in idle N/A N/A
CongRelOffset
mode)
must be smaller
than Qci2HoThd.
In the CellRacThd
MO, the sum of
No (And no impact
Qci3CongThd and
Read & Write on the UE in idle N/A N/A
CongRelOffset
mode)
must be smaller
than Qci3HoThd.
In the CellRacThd
MO, the sum of
No (And no impact
Qci4CongThd and
Read & Write on the UE in idle N/A N/A
CongRelOffset
mode)
must be smaller
than Qci4HoThd.
In the CellRacThd
MO, the sum of
Qci1CongThd and
CongRelOffset
must be smaller
than Qci1HoThd.
In the CellRacThd
MO, the sum of
Qci2CongThd and
CongRelOffset
must be smaller
No (And no impact
than Qci2HoThd.
Read & Write on the UE in idle N/A N/A
In the CellRacThd
mode)
MO, the sum of
Qci3CongThd and
CongRelOffset
must be smaller
than Qci3HoThd.
In the CellRacThd
MO, the sum of
Qci4CongThd and
CongRelOffset
must be smaller
than Qci4HoThd.
In the CellRacThd
No (And no impact
MO, UlRbHighThd
Read & Write on the UE in idle N/A N/A
must be greater
mode)
than UlRbLowThd.
In the CellRacThd
No (And no impact
MO, UlRbHighThd
Read & Write on the UE in idle N/A N/A
must be greater
mode)
than UlRbLowThd.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the
CellRfShutdown
MO, the sum of No (And no impact
DlPrbThd and Read & Write on the UE in idle N/A N/A
DlPrbOffset must mode)
be smaller than or
equal to 100.
In the
CellRfShutdown
MO, the sum of No (And no impact
UlPrbThd and Read & Write on the UE in idle N/A N/A
UlPrbOffset must mode)
be smaller than or
equal to 100.
In the
CellRfShutdown
MO, the sum of No (And no impact
DlPrbThd and Read & Write on the UE in idle N/A N/A
DlPrbOffset must mode)
be smaller than or
equal to 100.
In the
CellRfShutdown
MO, the sum of No (And no impact
UlPrbThd and Read & Write on the UE in idle N/A N/A
UlPrbOffset must mode)
be smaller than or
equal to 100.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Less than 0.1

None Read & Write Yes Cell
minute
 Less than 0.1
None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

When both of
DSCPRemarkSwitc
h(DSCPRemarkSwi
tch) and
FPIGTPUSwitch(FP No (And no impact
IGTPUSwitch) are Read & Write on the UE in idle N/A N/A
turned on, only the mode)
former ralated
feature is enabled
actually, but not the
later.
In the
CellServiceDiffCfg
MO, the
CellConStatePrbTh
No (And no impact
d parameter must
Read & Write on the UE in idle N/A N/A
be set to a value
mode)
smaller than that of
the
CellOverloadStateP
rbThd parameter.
In the
CellServiceDiffCfg
MO, the
CellConStatePrbTh
No (And no impact
d parameter must
Read & Write on the UE in idle N/A N/A
be set to a value
mode)
smaller than that of
the
CellOverloadStateP
rbThd parameter.
In the
CellServiceDiffCfg
MO, the
CellConStateUeNu
mThd parameter No (And no impact
must be set to a Read & Write on the UE in idle N/A N/A
value smaller than mode)
that of the
CellOverloadStateU
eNumThd
parameter.
In the
CellServiceDiffCfg
MO, the
CellConStateUeNu
mThd parameter No (And no impact
must be set to a Read & Write on the UE in idle N/A N/A
value smaller than mode)
that of the
CellOverloadStateU
eNumThd
parameter.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
CellShutdown MO,
the sum of No (And no impact
DlPrbThd and Read & Write on the UE in idle N/A N/A
DlPrbOffset must mode)
be smaller than or
equal to 100.

In the
CellShutdown MO,
the sum of No (And no impact
DlPrbThd and Read & Write on the UE in idle N/A N/A
DlPrbOffset must mode)
be smaller than or
equal to 100.

In the
CellShutdown MO,
the sum of No (And no impact
UlPrbThd and Read & Write on the UE in idle N/A N/A
UlPrbOffset must mode)
be smaller than or
equal to 100.
In the
CellShutdown MO,
the sum of No (And no impact
UlPrbThd and Read & Write on the UE in idle N/A N/A
UlPrbOffset must mode)
be smaller than or
equal to 100.

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If the switch for
frequency-domain
uplink ICIC in the
frequency domain
is turned on, the
UlHoppingType
parameter in the Less than 0.1
Read & Write Yes Cell
CellUlschAlgo minute
MO does not take
effect. In this
situation, the
default value
HOPPING_OFF
is retained.
 Less than 0.1
None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write No N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write No N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

In the
CellULUnifiedOLC
MO, the value of
RrcRejectRateLowT
Read & Write N/A N/A N/A
hd must be less
than the value of
RrcRejectRateHigh
Thd.
In the
CellULUnifiedOLC
MO, the value of
RrcRejectRateLowT
Read & Write N/A N/A N/A
hd must be less
than the value of
RrcRejectRateHigh
Thd.
In the
CellULUnifiedOLC
MO, the value of
RrcReqNumLowTh
Read & Write N/A N/A N/A
d must be less than
the value of
RrcReqNumHighTh
d.
In the
CellULUnifiedOLC
MO, the value of
RrcReqNumLowTh
Read & Write N/A N/A N/A
d must be less than
the value of
RrcReqNumHighTh
d.
In the
CellULUnifiedOLC
MO, the value of No (And no impact
UeNumLowThd Read & Write on the UE in idle N/A N/A
must be less than mode)
the value of
UeNumHighThd.
In the
CellULUnifiedOLC
MO, the value of No (And no impact
UeNumLowThd Read & Write on the UE in idle N/A N/A
must be less than mode)
the value of
UeNumHighThd.

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
5 Read & Write on the UE in idle N/A N/A
mode)
In the
InterRatCellShutdo
wn MO, the sum of
values of
No (And no impact
UtranCellDlLoadTh
Read & Write on the UE in idle N/A N/A
d and
mode)
UtranCellDlLoadOff
set must be less
than or equal to
100.
In the
InterRatCellShutdo
wn MO, the sum of
values of
No (And no impact
UtranCellDlLoadTh
Read & Write on the UE in idle N/A N/A
d and
mode)
UtranCellDlLoadOff
set must be less
than or equal to
100.
In the
InterRatCellShutdo
wn MO, the sum of
values of
No (And no impact
UtranCellUlLoadTh
Read & Write on the UE in idle N/A N/A
d and
mode)
UtranCellUlLoadOff
set must be less
than or equal to
100.
In the
InterRatCellShutdo
wn MO, the sum of
values of
No (And no impact
UtranCellUlLoadTh
Read & Write on the UE in idle N/A N/A
d and
mode)
UtranCellUlLoadOff
set must be less
than or equal to
100.
In the
InterRatCellShutdo
wn MO, the sum of
values of
No (And no impact
GeranCellLoadThd
Read & Write on the UE in idle N/A N/A
and
mode)
GeranCellLoadOffs
et must be less
than or equal to
100.
In the
InterRatCellShutdo
wn MO, the sum of
values of
No (And no impact
GeranCellLoadThd
Read & Write on the UE in idle N/A N/A
and
mode)
GeranCellLoadOffs
et must be less
than or equal to
100.

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

Less than 0.1

None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

The value of
ULSharedFreqEnd
RB must be greater
No (And no impact
than the value of
Read & Write on the UE in idle N/A N/A
ULSharedFreqStart
mode)
RB in the
ULZeroBufferZone
MO.

The value of
ULSharedFreqEnd
RB must be greater
No (And no impact
than the value of
Read & Write on the UE in idle N/A N/A
ULSharedFreqStart
mode)
RB in the
ULZeroBufferZone
MO.
The value of
ULZeroBufZonePR
BThd must be
greater than the No (And no impact
value of Read & Write on the UE in idle N/A N/A
ULZeroBufZonePR mode)
BOffset in the
ULZeroBufferZone
MO.
The value of
ULZeroBufZonePR
BThd must be
greater than the No (And no impact
value of Read & Write on the UE in idle N/A N/A
ULZeroBufZonePR mode)
BOffset in the
ULZeroBufferZone
MO.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

UlAccessDelayGoo
dThd in a
UserVpfmPara MO No (And no impact
must be lower than Read & Write on the UE in idle N/A N/A
UlAccessDelayBad mode)
Thd in a
UserVpfmPara.

UlAccessDelayGoo
dThd in a
UserVpfmPara MO No (And no impact
must be lower than Read & Write on the UE in idle N/A N/A
UlAccessDelayBad mode)
Thd in a
UserVpfmPara.
DlAccessDelayGoo
dThd in a
UserVpfmPara MO
must be lower than
DlAccessDelayBad
Thd in a
UserVpfmPara.
DlUserThruputThd0
in a UserVpfmPara
MO must be lower
than
DlUserThruputThd1
in a UserVpfmPara
and
DlUserThruputThd1
in a UserVpfmPara
No (And no impact
MO must be lower
Read & Write on the UE in idle N/A N/A
than
mode)
DlUserThruputThd2
in a UserVpfmPara
and
DlUserThruputThd2
in a UserVpfmPara
MO must be lower
than
DlUserThruputThd3
in a UserVpfmPara
and
DlUserThruputThd3
in a UserVpfmPara
MO must be lower
than
DlUserThruputThd4
in a UserVpfmPara.
DlAccessDelayGoo
dThd in a
UserVpfmPara MO
must be lower than
DlAccessDelayBad
Thd in a
UserVpfmPara.
DlUserThruputThd0
in a UserVpfmPara
MO must be lower
than
DlUserThruputThd1
in a UserVpfmPara
and
DlUserThruputThd1
in a UserVpfmPara
No (And no impact
MO must be lower
Read & Write on the UE in idle N/A N/A
than
mode)
DlUserThruputThd2
in a UserVpfmPara
and
DlUserThruputThd2
in a UserVpfmPara
MO must be lower
than
DlUserThruputThd3
in a UserVpfmPara
and
DlUserThruputThd3
in a UserVpfmPara
MO must be lower
than
DlUserThruputThd4
in a UserVpfmPara.

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

If
PrachConfigIndexC
fgInd in the
RACHCfg MO is set
to NOT_CFG and
RachAdjSwitch is No (And no impact
on, the RACH Read & Write on the UE in idle N/A N/A
resources in the cell mode)
can be adaptively
adjusted based on
the access type and
the number of
access attempts.
If the
SuperCombCellSwit
ch check box under
the SfnAlgoSwitch
parameter in the
CellAlgoSwitch MO
is selected, the No (And no impact
SrsSubframeRecfS Read & Write on the UE in idle N/A N/A
witch check box mode)
under the
SrsAlgoSwitch
parameter in the
CellAlgoSwitch MO
must not be
selected.
If either
PucchSwitch or
PucchFlexCfgSwitc
h of
PucchAlgoSwitch in
the CellAlgoSwitch
Less than 0.1
MO is selected, Read & Write Yes Cell
minute
SuperCombCellSwit
ch of SfnAlgoSwitch
in the
CellAlgoSwitch MO
must be
deselected.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In a CellAlgoSwitch
MO, the
InterFreqIdleMlbSwi
tch and No (And no impact
UtranIdleMlbSwitch Read & Write on the UE in idle N/A N/A
under the mode)
MlbAlgoSwitch
cannot be turned on
simultaneously.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the
CellAlgoSwitch MO,
when the
PucchPcDtxSinrSwi
tch in
UlPcAlgoSwitch is
ON, the
InnerLoopPucchSwi
tch in
UlPcAlgoSwitch No (And no impact
must be ON. Read & Write on the UE in idle N/A N/A
In the cell, when the mode)
PucchInitialPcSwitc
h in UlPcAlgoSwitch
in CellAlgoSwitch is
ON, the
InnerLoopPucchSwi
tch in
UlPcAlgoSwitch in
the CellAlgoSwitch
must be ON.

In the
CellAlgoSwitch,
No (And no impact
SsrdAlgoSwitch is
Read & Write on the UE in idle N/A N/A
set to On only when
mode)
BfAlgoSwitch has
been set to On.
OutOfBandRelayS
witch under the
RelaySwitch
parameter in the
CellAlgoSwitch MO
cannot be turned on
when
MBSFNShutDownS
witch under the
DlSchSwitch
parameter is turned No (And no impact
on. Read & Write on the UE in idle N/A N/A
If mode)
SuperCombCellSwit
ch of SfnAlgoSwitch
in the
CellAlgoSwitch MO
is set to on,
SpsSchSwitch of
DlSchSwitch in the
CellAlgoSwitch MO
must be
deselected.
is set to On only if
UlVmimoSwitch
under UlSchSwitch
in a CellAlgoSwitch
MO is set to On.
OutOfBandRelayS
witch under the
RelaySwitch
parameter in the
CellAlgoSwitch MO
cannot be turned on
when
TtiBundlingSwitch
under the
UlSchSwitch
parameter is turned
on.
OutOfBandRelayS
No (And no impact
witch under the
Read & Write on the UE in idle N/A N/A
RelaySwitch
mode)
parameter in the
CellAlgoSwitch MO
cannot be turned on
when
UlIicsAlgoSwitch
under the
UlSchSwitch
parameter is turned
on.
If
SuperCombCellSwit
ch of SfnAlgoSwitch
in the
CellAlgoSwitch MO
is set to on,
SpsSchSwitch of
UlSchSwitch in the
CellAlgoSwitch MO

Less than 0.1

None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
and
MuBfAlgoSwitch
cannot be set to On
simultaneously.
In the
CellAlgoSwitch MO,
the TM9MuBfSwitch
check box can be
selected under the
MuBfAlgoSwitch
parameter only if
the MuBfSwitch
check box is
selected under the
MuBfAlgoSwitch
parameter or the
SfnCbfSwitch check
box is selected
No (And no impact
under the
Read & Write on the UE in idle N/A N/A
SfnAlgoSwitch
mode)
parameter.
In the
CellAlgoSwitch MO,
the
MubfResAdjSwitch
check box can be
selected under the
MuBfAlgoSwitch
parameter only if
both the following
conditions are met:
The MuBfSwitch
check box is
selected under the
MuBfAlgoSwitch
parameter or the
SfnCbfSwitch check
box is selected

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the
CellAlgoSwitch MO,
if AcBarAlgoSwitch
is set to
ACBAR_SWITCH_
DYNAMIC, either
No (And no impact
the
Read & Write on the UE in idle N/A N/A
DYNAMIC_FOR_M
mode)
O or
DYNAMIC_FOR_S
SAC option of
AcBarAlgoforDynS
witch must be
selected.

In a CellAlgoSwitch,
if
SfnUplinkCompSwit
ch turn on
ComCoverUlComp
Switch, then the
SfnUlSchSwitch in
CellAlgoSwitch is
set to JOINT. No (And no impact
In the Read & Write on the UE in idle N/A N/A
CellAlgoSwitch MO, mode)
if SfnUlSchSwitch is
set to ADAPTIVE or
SfnDlSchSwitch is
set to ADAPTIVE,
SuperCombCellSwit
ch of SfnAlgoSwitch
must be
deselected.
In a CellAlgoSwitch,
if SfnDlSchSwitch is
not set to
ADAPTIVE, then
the SfnAlgoSwitch
in CellAlgoSwitch
could not turn on
SfnPdcchSdmaSwit
ch. No (And no impact
In the Read & Write on the UE in idle N/A N/A
CellAlgoSwitch MO, mode)
if SfnUlSchSwitch is
set to ADAPTIVE or
SfnDlSchSwitch is
set to ADAPTIVE,
SuperCombCellSwit
ch of SfnAlgoSwitch
must be
deselected.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
The
DlCellCoverEnhanc
eAlgoSw option of
CellDlCoverEnhanc
eSwitch in the No (And no impact
CellAlgoSwitch MO Read & Write on the UE in idle N/A N/A
can be selected mode)
only if GLPwrShare
of the
CellAlgoSwitch MO
is set to OFF.
EicicSwitch in the
CellAlgoSwitch MO
cannot be set to
STATIC or
DYNAMIC when
OutOfBandRelayS
witch under the
No (And no impact
RelaySwitch
Read & Write on the UE in idle N/A N/A
parameter is turned
mode)
on.
In the
CellAlgoSwitch MO,
if FeicicSwitch is set
to ABS, EicicSwitch
must be set to
DYNAMIC.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If the
InterDlCompCbfSwi
tch check box
under the
DlCompSwitch
parameter is
selected, the
InterDlCompDcsSwi
tch check box
cannot be cleared.
If the FddTddInd
parameter in the
Cell MO is set to
No (And no impact
CELL_TDD, and
Read & Write on the UE in idle N/A N/A
InterDlCompCbfSwi
mode)
tch or
InterDlCompDcsSwi
tch under the
DlCompSwitch
parameter in the
CellAlgoSwitch MO
is set to 1,
IntraDlCompSwitch
under the
DlCompSwitch
parameter in the
CellAlgoSwitch MO
must be set to 1.
PsicSwitch in the
CellAlgoSwitch MO
is set to On only if No (And no impact
UlVmimoSwitch Read & Write on the UE in idle N/A N/A
under UlSchSwitch mode)
in a CellAlgoSwitch
MO is set to On.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the
CellAlgoSwitch MO,
if
UlJointReceptionPh
aseIISwitch under
UplinkCompSwitch
is turned on,
UlJointReceptionSw
itch under
UplinkCompSwitch
must also be turned
No (And no impact
on.
Read & Write on the UE in idle N/A N/A
In the
mode)
CellAlgoSwitch MO,
if
UlJointReception3C
ellSwitch under
UplinkCompSwitch
is turned on,
UlJointReceptionSw
itch under
UplinkCompSwitch
must also be turned
on.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write Yes Cell 0.1

The
SfnDl2LoadLevelAd
ptSwitch check box
cannot be selected
under the
SfnAlgoSwitch No (And no impact
parameter in the Read & Write on the UE in idle N/A N/A
CellAlgoSwitch MO mode)
if the
SfnLoadBasedAdpt
Switch parameter in
the CellAlgoSwitch
is set to OFF.
In the
CellAlgoSwitch MO,
if SmartIrcSwitch
under
PuschIrcAlgoSwitch No (And no impact
is turned on, Read & Write on the UE in idle N/A N/A
MrcIrcAdptSwitch mode)
under
PuschIrcAlgoSwitch
must also be turned
on.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
is set to on,
SpsSchSwitch of
DlSchSwitch in the
CellAlgoSwitch MO
must be
deselected.
If
SuperCombCellSwit
ch of SfnAlgoSwitch
in the
CellAlgoSwitch MO
is set to on,
SpsSchSwitch of
UlSchSwitch in the
CellAlgoSwitch MO
must be
deselected.
If the No (And no impact
Less than 0.1
SuperCombCellSwit Read & Write on the UE in idle Cell
minute
ch check box under mode)
the SfnAlgoSwitch
parameter in the
CellAlgoSwitch MO
is selected, the
SrsSubframeRecfS
witch check box
under the
SrsAlgoSwitch
parameter in the
CellAlgoSwitch MO
must not be
selected.
The
SfnDl2LoadLevelAd
ptSwitch check box
cannot be selected
under the
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Less than 0.1

None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
CellAlgoSwitch,
SsrdAlgoSwitch
and
MuBfAlgoSwitch
cannot be set to On No (And no impact
simultaneously. Read & Write on the UE in idle N/A N/A
In the mode)
CellAlgoSwitch,
SsrdAlgoSwitch is
set to On only when
BfAlgoSwitch has
been set to On.
In a CellAlgoSwitch,
if
SfnUplinkCompSwit
ch turn on
ComCoverUlComp
Switch, then the
SfnUlSchSwitch in
CellAlgoSwitch is
set to JOINT.
If the
InterBaseBandSwit
ch check box under
the
SfnUplinkCompSwit
ch parameter in the
CellAlgoSwitch MO
is selected, the
IntraBaseBandSwit No (And no impact
ch check box under Read & Write on the UE in idle N/A N/A
the mode)
SfnUplinkCompSwit
ch parameter must
be selected.
If the
SfnUplinkComp3Ce
llSwitch check box
under the
SfnUplinkCompSwit
ch parameter in the
CellAlgoSwitch MO
is selected, the
IntraBaseBandSwit
ch check box under
the
SfnUplinkCompSwit
ch parameter must
be selected.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
DYNAMIC when
OutOfBandRelayS
witch under the
RelaySwitch
parameter is turned
on.
OutOfBandRelayS
witch under the
RelaySwitch
parameter in the
CellAlgoSwitch MO
cannot be turned on
when
MBSFNShutDownS
witch under the
DlSchSwitch
parameter is turned
on.
No (And no impact
OutOfBandRelayS
Read & Write on the UE in idle N/A N/A
witch under the
mode)
RelaySwitch
parameter in the
CellAlgoSwitch MO
cannot be turned on
when
TtiBundlingSwitch
under the
UlSchSwitch
parameter is turned
on.
OutOfBandRelayS
witch under the
RelaySwitch
parameter in the
CellAlgoSwitch MO
cannot be turned on
when
UlIicsAlgoSwitch

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the
CellAlgoSwitch MO,
if AcBarAlgoSwitch
is set to
ACBAR_SWITCH_
DYNAMIC, either
No (And no impact
the
Read & Write on the UE in idle N/A N/A
DYNAMIC_FOR_M
mode)
O or
DYNAMIC_FOR_S
SAC option of
AcBarAlgoforDynS
witch must be
selected.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the
CellAlgoSwitch MO,
No (And no impact
if FeicicSwitch is set
Read & Write on the UE in idle N/A N/A
to ABS, EicicSwitch
mode)
must be set to
DYNAMIC.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write No N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
The
DlCellCoverEnhanc
eAlgoSw option of
CellDlCoverEnhanc
eSwitch in the No (And no impact
CellAlgoSwitch MO Read & Write on the UE in idle N/A N/A
can be selected mode)
only if GLPwrShare
of the
CellAlgoSwitch MO
is set to OFF.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write No N/A N/A
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write N/A N/A N/A
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write N/A N/A N/A
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

The value of the

LbtNiHighThreshold
parameter in the
CellDlschAlgo MO
No (And no impact
must be greater
Read & Write on the UE in idle N/A N/A
than or equal to that
mode)
of the
LbtNiLowThreshold
parameter in the
CellDlschAlgo MO.

The value of the

LbtNiHighThreshold
parameter in the
CellDlschAlgo MO
No (And no impact
must be greater
Read & Write on the UE in idle N/A N/A
than or equal to that
mode)
of the
LbtNiLowThreshold
parameter in the
CellDlschAlgo MO.

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

In the CellMLB MO,
the sum of
InterFreqMlbThd No (And no impact
and LoadOffset Read & Write on the UE in idle N/A N/A
must be smaller mode)
than or equal to
100.
In the CellMLB MO,
the sum of
No (And no impact
InterRatMlbThd and
Read & Write on the UE in idle N/A N/A
LoadOffset must be
mode)
smaller than or
equal to 100.
In the CellMLB MO,
the sum of
InterFreqMlbThd
and LoadOffset
must be smaller
than or equal to No (And no impact
100. Read & Write on the UE in idle N/A N/A
In the CellMLB MO, mode)
the sum of
InterRatMlbThd and
LoadOffset must be
smaller than or
equal to 100.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the CellMLB MO,

InterRatLoadEvalPr No (And no impact
d must be greater Read & Write on the UE in idle N/A N/A
than or equal to mode)
InitValidPeriod.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In a CellMLB MO,
the sum of
InterFreqMlbUeNu No (And no impact
mThd and Read & Write on the UE in idle N/A N/A
MlbUeNumOffset mode)
must be less than
or equal to 10000.
In a CellMLB MO,
the sum of
InterFreqMlbUeNu No (And no impact
mThd and Read & Write on the UE in idle N/A N/A
MlbUeNumOffset mode)
must be less than
or equal to 10000.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the CellMLB MO,
if
InterFreqMLBRanS
hareMode is set to No (And no impact
SHARING,Proportio Read & Write on the UE in idle N/A N/A
n under mode)
InterFreqIdleMlbMo
de must be turned
off.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the CellMLB MO,
if
InterFreqMLBRanS
hareMode is set to No (And no impact
SHARING,Proportio Read & Write on the UE in idle N/A N/A
n under mode)
InterFreqIdleMlbMo
de must be turned
off.
 No (Modifications
on this parameter
None Read & Write will affect cell N/A N/A
reselection of the
UE in idle mode.)
 No (Modifications
on this parameter
None Read & Write will affect cell N/A N/A
reselection of the
UE in idle mode.)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the CellMLB MO,
InterRatLoadEvalPr No (And no impact
d must be greater Read & Write on the UE in idle N/A N/A
than or equal to mode)
InitValidPeriod.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

In a
CellMlbAutoGroup
No (And no impact
MO, the value of
Read & Write on the UE in idle N/A N/A
OverlapIndAddThd
mode)
must be larger than
OverlapIndDelThd.
In a
CellMlbAutoGroup
No (And no impact
MO, the value of
Read & Write on the UE in idle N/A N/A
OverlapIndAddThd
mode)
must be larger than
OverlapIndDelThd.
 No (And affects the
None Read & Write cell reselection for N/A N/A
UEs in idle mode)

No (And affects the

None Read & Write cell reselection for N/A N/A
UEs in idle mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And affects the

None Read & Write cell reselection for N/A N/A
UEs in idle mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write No N/A N/A

None Read & Write No N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In a CellPdcchAlgo
MO, the value of
CceThdtoEnableEp No (And no impact
dcch must be Read & Write on the UE in idle N/A N/A
larger than mode)
CceThdtoDisableEp
dcch.
In a CellPdcchAlgo
MO, the value of
RbThdtoEnableEpd No (And no impact
cch must be smaller Read & Write on the UE in idle N/A N/A
than mode)
RbThdtoDisableEp
dcch.

In a CellPdcchAlgo
MO, the value of
CceThdtoEnableEp No (And no impact
dcch must be Read & Write on the UE in idle N/A N/A
larger than mode)
CceThdtoDisableEp
dcch.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In a CellPdcchAlgo
MO, the value of
RbThdtoEnableEpd No (And no impact
cch must be smaller Read & Write on the UE in idle N/A N/A
than mode)
RbThdtoDisableEp
dcch.

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute
None Read & Write No N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute

If FrameOffsetMode
is set to
CustomFrameOffse Read & Write Yes Cell 0.1
t, CellFrameOffset
must be set.

None Read Only N/A N/A N/A

In the
CellNoAccessAlmP
ara MO, if
NoAccessStartDete
ctTime is different
from
NoAccessStopDete
ctTime, No (And no impact
NoAccessDetectTi Read & Write on the UE in idle N/A N/A
mer must be mode)
smaller than the
time difference
between
NoAccessStartDete
ctTime and
NoAccessStopDete
ctTime.

In the
CellNoAccessAlmP
ara MO, if
NoAccessStartDete
ctTime is different
from
NoAccessStopDete
ctTime, No (And no impact
NoAccessDetectTi Read & Write on the UE in idle N/A N/A
mer must be mode)
smaller than the
time difference
between
NoAccessStartDete
ctTime and
NoAccessStopDete
ctTime.
In the
CellNoAccessAlmP
ara MO, if
NoAccessStartDete
ctTime is different
from
NoAccessStopDete
ctTime, No (And no impact
NoAccessDetectTi Read & Write on the UE in idle N/A N/A
mer must be mode)
smaller than the
time difference
between
NoAccessStartDete
ctTime and
NoAccessStopDete
ctTime.

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

It is recommended
that this parameter
be set to a value
smaller than the
No (And no impact
default value only in
Read & Write on the UE in idle N/A N/A
scenarios where
mode)
short delay and low
jitter are required
regardless of the
throughput.

It is recommended
that this parameter
be set to a value
smaller than the
No (And no impact
default value only in
Read & Write on the UE in idle N/A N/A
scenarios where
mode)
short delay and low
jitter are required
regardless of the
throughput.
It is recommended
that the
UlSPSDegradeSwit
No (And no impact
ch option be
Read & Write on the UE in idle N/A N/A
selected when
mode)
uplink SPS is
enabled on a
network.

It is recommended
that the
DlSPSDegradeSwit
No (And no impact
ch option be
Read & Write on the UE in idle N/A N/A
selected when
mode)
downlink SPS is
enabled on a
network.

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (The parameter
modification has no
None Read & Write N/A N/A
impact on the
equipment.)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

Mcc in an
SfnEdgeRruRelatio
Read & Write N/A N/A N/A
n MO consists of
digits only.
Mnc in an
SfnEdgeRruRelatio
Read & Write N/A N/A N/A
n MO consists of
digits only.

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

Less than 0.1

None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write N/A N/A N/A

No (And no impact
None Read & Write N/A N/A on the UE in idle
mode)
None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

PrachFreqOffset
parameter can be
manually
configured only
when PucchSwitch
of the
PucchAlgoSwitch
parameter in the
CellAlgoSwitch MO
is turned off.
The
PrachFreqOffset
parameter must be
properly set so that
the PRACH RBs
are strictly confined
to the cell Less than 0.1
Read & Write Yes Cell
bandwidth. minute
Otherwise, the cell
cannot be
activated.
The
PrachFreqOffset
parameter must be
properly set so that
the PRACH RBs
and PUCCH RBs
do not overlap in
the frequency
domain when the
cell bandwidth is
not 1.4 MHz.
Otherwise, the cell
cannot be
If RachAdjSwitch in
the CellAlgoSwitch
MO is turned on
and this parameter Less than 0.1
Read & Write Yes Cell
is set to CFG, this minute
parameter takes
precedence over
RachAdjSwitch.

The setting of this

parameter takes
effect only when the Less than 0.1
Read & Write Yes Cell
PrachConfigIndexC minute
fgInd parameter is
set to CFG.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute
 Less than 0.1
None Read & Write Yes Cell
minute
 Less than 0.1
None Read & Write Yes Cell
minute
If the SrsCfgInd
parameter is set to
TRUE, the
TddSrsCfgMode
parameter must be
set. Less than 0.1
Read & Write Yes Cell
If the SrsCfgInd minute
parameter is not set
to TRUE, the
TddSrsCfgMode
parameter does not
need to be set.
 Less than 0.1
None Read & Write Yes Cell
minute
 Less than 0.1
None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute

Less than 0.1

None Read & Write Yes Cell
minute
 Less than 0.1
None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A 0
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute

If the HoppingMode
in PUSCHCfg MO
is set to
INTRA_AND_INTE
R_SUB_FRAME,th Less than 0.1
Read & Write Yes Cell
e minute
TaEnhancePuschD
mrs under the
TaEnhance must be
set to OFF.
 Less than 0.1
None Read & Write Yes Cell
minute
 Less than 0.1
None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute

This parameter can

be set only if
PucchAlgoSwitch in
the CellAlgoSwitch
MO is turned off.
Otherwise, the
parameter setting
does not take
effect.
The NaSriChNum
parameter must be Less than 0.1
Read & Write Yes Cell
properly set so that minute
the PRACH RBs
and PUCCH RBs
do not overlap in
the frequency
domain when the
cell bandwidth is
not 1.4 MHz.
Otherwise, the cell
cannot be
activated.
This parameter can
be set only if
PucchAlgoSwitch in
the CellAlgoSwitch
MO is turned off.
Otherwise, the
parameter setting
does not take
effect.
Less than 0.1
This parameter Read & Write Yes Cell
minute
must be properly
set so that the
PRACH RBs and
PUCCH RBs do not
overlap in the
frequency domain.
Otherwise, the cell
cannot be
activated.

Less than 0.1

None Read & Write Yes Cell
minute

None Read Only N/A N/A N/A

 Less than 0.1
None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

Mcc in an
Cdma20001XrttPre
Read Only N/A N/A N/A
Reg MO consists of
digits only.

Mnc in an
Cdma20001XrttPre
Read Only N/A N/A N/A
Reg MO consists of
digits only.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
MscId in the
Cdma20001XrttPre
Reg MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
No (And no impact
number is
Read & Write on the UE in idle N/A N/A
composed of upper-
mode)
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If BandClassInclude
is set to CFG,
BandClass must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If BandClassInclude
mode)
is set to NOT_CFG,
BandClass does
not need to be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If CsfbRegCfgInd is
set to CFG,
MultiSidInd must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If CsfbRegCfgInd is
mode)
set to NOT_CFG,
MultiSidInd does
not need to be set.
If CsfbRegCfgInd is
set to CFG,
MultiNidInd must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If CsfbRegCfgInd is
mode)
set to NOT_CFG,
MultiNidInd does
not need to be set.

If CsfbRegCfgInd is
set to CFG,
HomeRegInd must
No (And no impact
be set.
Read & Write on the UE in idle N/A N/A
If CsfbRegCfgInd is
mode)
set to NOT_CFG,
HomeRegInd does
not need to be set.
If CsfbRegCfgInd is
set to CFG,
ForeignSidRegInd
must be set. No (And no impact
If CsfbRegCfgInd is Read & Write on the UE in idle N/A N/A
set to NOT_CFG, mode)
ForeignSidRegInd
does not need to be
set.

If CsfbRegCfgInd is
set to CFG,
ForeignNidRegInd
must be set. No (And no impact
If CsfbRegCfgInd is Read & Write on the UE in idle N/A N/A
set to NOT_CFG, mode)
ForeignNidRegInd
does not need to be
set.
If CsfbRegCfgInd is
set to CFG,
ParamRegInd must
No (And no impact
be set.
Read & Write on the UE in idle N/A N/A
If CsfbRegCfgInd is
mode)
set to NOT_CFG,
ParamRegInd does
not need to be set.

If CsfbRegCfgInd is
set to CFG,
PowerUpRegInd
must be set. No (And no impact
If CsfbRegCfgInd is Read & Write on the UE in idle N/A N/A
set to NOT_CFG, mode)
PowerUpRegInd
does not need to be
set.
If CsfbRegCfgInd is
set to CFG,
RegPeriod must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If CsfbRegCfgInd is
mode)
set to NOT_CFG,
RegPeriod does not
need to be set.

If CsfbRegCfgInd is
set to CFG,
RegZone must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If CsfbRegCfgInd is
mode)
set to NOT_CFG,
RegZone does not
need to be set.
If CsfbRegCfgInd is
set to CFG,
TotalZone must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If CsfbRegCfgInd is
mode)
set to NOT_CFG,
TotalZone does not
need to be set.

If CsfbRegCfgInd is
set to CFG,
ZoneTimer must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If CsfbRegCfgInd is
mode)
set to NOT_CFG,
ZoneTimer does not
need to be set.
If CsfbRegCfgInd is
set to CFG,
PowerDownInclude
must be set. No (And no impact
If CsfbRegCfgInd is Read & Write on the UE in idle N/A N/A
set to NOT_CFG, mode)
PowerDownInclude
does not need to be
set.

If CsfbRegCfgInd is
set to CFG,
No (Modifications
AcBarCfgInd must
on this parameter
be set.
Read & Write will affect cell N/A N/A
If CsfbRegCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBarCfgInd does
not need to be set.

If AcBarCfgInd is
set to CFG,
No (Modifications
AcBar0to9 must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If AcBarCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBar0to9 does not
need to be set.
If AcBarCfgInd is
set to CFG,
No (Modifications
AcBar10 must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If AcBarCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBar10 does not
need to be set.

If AcBarCfgInd is
set to CFG,
No (Modifications
AcBar11 must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If AcBarCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBar11 does not
need to be set.

If AcBarCfgInd is
set to CFG,
No (Modifications
AcBar12 must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If AcBarCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBar12 does not
need to be set.
If AcBarCfgInd is
set to CFG,
No (Modifications
AcBar13 must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If AcBarCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBar13 does not
need to be set.

If AcBarCfgInd is
set to CFG,
No (Modifications
AcBar14 must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If AcBarCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBar14 does not
need to be set.

If AcBarCfgInd is
set to CFG,
No (Modifications
AcBar15 must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If AcBarCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBar15 does not
need to be set.
If AcBarCfgInd is
set to CFG,
No (Modifications
AcBarMsg must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If AcBarCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBarMsg does not
need to be set.

If AcBarCfgInd is
set to CFG,
No (Modifications
AcBarReg must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If AcBarCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBarReg does not
need to be set.

If AcBarCfgInd is
set to CFG,
No (Modifications
AcBarEmg must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If AcBarCfgInd is
reselection of the
set to NOT_CFG,
UE in idle mode.)
AcBarEmg does not
need to be set.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If ProtocolRevInc is
set to CFG,
ProtocolRev must
No (And no impact
be set.
Read & Write on the UE in idle N/A N/A
If ProtocolRevInc is
mode)
set to NOT_CFG,
ProtocolRev does
not need to be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If
MinProtocolRevInc
is set to CFG,
MinProtocolRev
must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
MinProtocolRevInc mode)
is set to NOT_CFG,
MinProtocolRev
does not need to be
set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If AuthInclude is set
to CFG, Auth must
be set. No (And no impact
If AuthInclude is set Read & Write on the UE in idle N/A N/A
to NOT_CFG, Auth mode)
does not need to be
set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If
MaxNumAltSoInclu
de is set to CFG,
MaxNumAltSo must
be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
MaxNumAltSoInclu mode)
de is set to
NOT_CFG,
MaxNumAltSo does
not need to be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If
PrefMsIdTypeInclud
e is set to CFG,
PrefMsIdType must
be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
PrefMsIdTypeInclud mode)
e is set to
NOT_CFG,
PrefMsIdType does
not need to be set.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If
ImsiTSupportedIncl
ude is set to CFG,
ImsiTSupported
must be set.
No (And no impact
If
Read & Write on the UE in idle N/A N/A
ImsiTSupportedIncl
mode)
ude is set to
NOT_CFG,
ImsiTSupported
does not need to be
set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc3
must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
FpcFchCfgInclude mode)
is set to NOT_CFG,
FpcFchInitSteptRc3
does not need to be
set.
If
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc4
must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
FpcFchCfgInclude mode)
is set to NOT_CFG,
FpcFchInitSteptRc4
does not need to be
set.
If
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc5
must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
FpcFchCfgInclude mode)
is set to NOT_CFG,
FpcFchInitSteptRc5
does not need to be
set.
If
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc1
1 must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
FpcFchCfgInclude mode)
is set to NOT_CFG,
FpcFchInitSteptRc1
1 does not need to
be
If set.
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc1
2 must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
FpcFchCfgInclude mode)
is set to NOT_CFG,
FpcFchInitSteptRc1
2 does not need to
be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If PilotIncrInclude is
set to CFG,
PilotIncr must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If PilotIncrInclude is
mode)
set to NOT_CFG,
PilotIncr does not
need to be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If
GcsnaL2AckTimerI
nclude is set to
CFG,
GcsnaL2AckTimer
must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
GcsnaL2AckTimerI mode)
nclude is set to
NOT_CFG,
GcsnaL2AckTimer
does not need to be
set.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If
GcsnaSeqContextT
Include is set to
CFG,
GcsnaSeqContextTi
mer must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
GcsnaSeqContextT mode)
Include is set to
NOT_CFG,
GcsnaSeqContextTi
mer does not need
to be set.

None Read Only N/A N/A N/A

SectorId104 in the
Cdma2000HrpdNC
ell MO must be set
to a hexadecimal
number starting
with 0x and with a
total length not
greater than 26
digits. A
hexadecimal
number is
composed of upper- Read Only N/A N/A N/A
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.
SectorId24 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
number is
Read Only N/A N/A N/A
composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

In the
Cdma2000HrpdNce
ll MO,
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following No (And no impact
characters: double Read & Write on the UE in idle N/A N/A
quotation marks ("), mode)
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+), two or
more blanks, and
two or more
percentage signs
(%).

In the
Cdma2000HrpdNce
ll MO,
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following No (And no impact
characters:double Read & Write on the UE in idle N/A N/A
quotation marks ("), mode)
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+), two or
more blanks, and
two or more
percentage signs
(%).
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

Mcc in an
Cdma2000HrpdPre
Read Only N/A N/A N/A
Reg MO consists of
digits only.

Mnc in an
Cdma2000HrpdPre
Read Only N/A N/A N/A
Reg MO consists of
digits only.
 No (Modifications
on this parameter
None Read & Write will affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write will affect cell N/A N/A
reselection of the
UE in idle mode.)

If
McPreRegParaCfgI
nd is set to CFG,
McPreRegistrationA
No (Modifications
llowed must be set.
on this parameter
If
Read & Write will affect cell N/A N/A
McPreRegParaCfgI
reselection of the
nd is set to
UE in idle mode.)
NOT_CFG,
McPreRegistrationA
llowed does not
need to be set.

No (For the UE in
idle mode,
modifications on
None Read & Write N/A N/A
this parameter
would affect cell
reselection.)
 No (Modifications
on this parameter
None Read & Write will affect cell N/A N/A
reselection of the
UE in idle mode.)

If
SecondaryPreRegZ
oneId0Ind is set to
CFG,
No (For the UE in
SecondaryPreRegZ
idle mode,
oneId0 must be set.
modifications on
If Read & Write N/A N/A
this parameter
SecondaryPreRegZ
would affect cell
oneId0Ind is set to
reselection.)
NOT_CFG,
SecondaryPreRegZ
oneId0 does not
need to be set.

If
SecondaryPreRegZ
oneId0Ind is set to
CFG,
SecondaryPreRegZ
No (Modifications
oneId1Ind must be
on this parameter
set.
Read & Write will affect cell N/A N/A
If
reselection of the
SecondaryPreRegZ
UE in idle mode.)
oneId0Ind is set to
NOT_CFG,
SecondaryPreRegZ
oneId1Ind does not
need to be set.
If
SecondaryPreRegZ
oneId1Ind is set to
CFG,
No (For the UE in
SecondaryPreRegZ
idle mode,
oneId1 must be set.
modifications on
If Read & Write N/A N/A
this parameter
SecondaryPreRegZ
would affect cell
oneId1Ind is set to
reselection.)
NOT_CFG,
SecondaryPreRegZ
oneId1 does not
need to be set.

None Read Only N/A N/A N/A

Mcc in an
Cdma2000HrpdRef
Read Only N/A N/A N/A
Cell MO consists of
digits only.
Mnc in an
Cdma2000HrpdRef
Read Only N/A N/A N/A
Cell MO consists of
digits only.

SectorId104 in the
Cdma2000HrpdNC
ell MO must be set
to a hexadecimal
number starting
with 0x and with a
total length not
greater than 26
digits. A
hexadecimal
number is
composed of upper- Read Only N/A N/A N/A
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.
SectorId24 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
number is
Read Only N/A N/A N/A
composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If
SearchWindowSize
CfgInd is set to
CFG,
SearchWindowSize
must be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
SearchWindowSize mode)
CfgInd is set to
NOT_CFG,
SearchWindowSize
does not need to be
set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

The value of the

ClusterId parameter
in the Cluster MO Read Only N/A N/A N/A
ranges from 0 to
999.
A maximum of 60
Cluster MOs with
No (And no impact
the ClusterType
Read & Write on the UE in idle N/A N/A
parameter set to
mode)
the same value can
be configured.

None Read Only N/A N/A N/A

Mcc in a ClusterCell
MO must be set to Read Only N/A N/A N/A
a number.
Mnc in a ClusterCell
MO must be set to Read Only N/A N/A N/A
a number.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A
A maximum of 10
CspcCellSrsMeasN
Cell MOs can
include the same
combination of Mcc,
Mnc, eNodeBId,
and CellId.
Mcc in a
CspcCellSrsMeasN
Cell MO must be
set to a number.
In a
CspcCellSrsMeasN
Cell MO, the
Read Only N/A N/A N/A
combination of Mcc,
Mnc, eNodeBId,
and CellId that
identify the local
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.

A maximum of 10
CspcCellSrsMeasN
Cell MOs can
include the same
combination of Mcc,
Mnc, eNodeBId,
and CellId.
Mnc in a
CspcCellSrsMeasN
Cell MO must be
set to a number.
In a
CspcCellSrsMeasN
Cell MO, the
Read Only N/A N/A N/A
combination of Mcc,
Mnc, eNodeBId,
and CellId that
identify the local
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.
A maximum of 10
CspcCellSrsMeasN
Cell MOs can
include the same
combination of Mcc,
Mnc, eNodeBId,
and CellId.
In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Mnc, eNodeBId,
Read Only N/A N/A N/A
and CellId that
identify the local
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.

A maximum of 10
CspcCellSrsMeasN
Cell MOs can
include the same
combination of Mcc,
Mnc, eNodeBId,
and CellId.
In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Mnc, eNodeBId,
Read Only N/A N/A N/A
and CellId that
identify the local
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.
NCellMcc in a
CspcCellSrsMeasN
Cell MO must be
set to a number.
In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Mnc, eNodeBId,
and CellId that
identify the local Read Only N/A N/A N/A
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.

NCellMnc in a
CspcCellSrsMeasN
Cell MO must be
set to a number.
In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Mnc, eNodeBId,
and CellId that
identify the local Read Only N/A N/A N/A
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.
In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Mnc, eNodeBId,
and CellId that
identify the local
cell cannot be the
same as the Read Only N/A N/A N/A
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.
In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Mnc, eNodeBId,
and CellId that
identify the local
cell cannot be the
same as the Read Only N/A N/A N/A
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.

None Read Only N/A N/A N/A

The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each
CspcClusterCell
MO must be
Read Only N/A N/A N/A
unique.
A maximum of 36
CspcClusterCell
MOs can be
configured under a
CspcCluster MO.
The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each
CspcClusterCell
MO must be Read Only N/A N/A N/A
unique.
Mcc in a
CspcClusterCell
MO must be set to
a number.

The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each
CspcClusterCell
MO must be Read Only N/A N/A N/A
unique.
Mnc in a
CspcClusterCell
MO must be set to
a number.
The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each Read Only N/A N/A N/A
CspcClusterCell
MO must be
unique.

The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each Read Only N/A N/A N/A
CspcClusterCell
MO must be
unique.
Mcc in an
EutranExternalCell
Plmn MO consists
of digits only.
In an
EutranExternalCell
Read Only N/A N/A N/A
Plmn MO, the
combination of Mnc
and Mcc must be
different from that of
ShareMnc and
ShareMcc.

In an
EutranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
different from that of
Read Only N/A N/A N/A
ShareMnc and
ShareMcc.
Mnc in an
EutranExternalCell
Plmn MO consists
of digits only.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

In an
EutranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
different from that of
Read Only N/A N/A N/A
ShareMnc and
ShareMcc.
ShareMcc in an
EutranExternalCell
Plmn MO consists
of digits only.
In an
EutranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
different from that of
Read Only N/A N/A N/A
ShareMnc and
ShareMcc.
ShareMnc in an
EutranExternalCell
Plmn MO consists
of digits only.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

In a
GeranExternalCellP
lmn MO, the
combination of Mnc
and Mcc must be
different from that of
Read Only N/A N/A N/A
ShareMnc and
ShareMcc.
Mcc in a
GeranExternalCellP
lmn MO consists of
digits only.
In a
GeranExternalCellP
lmn MO, the
combination of Mnc
and Mcc must be
different from that of
Read Only N/A N/A N/A
ShareMnc and
ShareMcc.
Mnc in a
GeranExternalCellP
lmn MO consists of
digits only.

In a
GeranExternalCellP
lmn MO, the
combination of Mnc
and Mcc must be
different from that of
Read Only N/A N/A N/A
ShareMnc and
ShareMcc.
ShareMcc in a
GeranExternalCellP
lmn MO consists of
digits only.

In a
GeranExternalCellP
lmn MO, the
combination of Mnc
and Mcc must be
different from that of
Read Only N/A N/A N/A
ShareMnc and
ShareMcc.
ShareMnc in a
GeranExternalCellP
lmn MO consists of
digits only.
Mcc in a
UtranExternalCellPl
mn MO consists of
digits only.
In a
UtranExternalCellPl
Read Only N/A N/A N/A
mn MO, the
combination of Mnc
and Mcc must be
different from that of
ShareMnc and
ShareMcc.

In a
UtranExternalCellPl
mn MO, the
combination of Mnc
and Mcc must be
different from that of
Read Only N/A N/A N/A
ShareMnc and
ShareMcc.
Mnc in a
UtranExternalCellPl
mn MO consists of
digits only.
None Read Only N/A N/A N/A
None Read Only N/A N/A N/A

In a
UtranExternalCellPl
mn MO, the
combination of Mnc
and Mcc must be
different from that of
Read Only N/A N/A N/A
ShareMnc and
ShareMcc.
ShareMcc in a
UtranExternalCellPl
mn MO consists of
digits only.
In a
UtranExternalCellPl
mn MO, the
combination of Mnc
and Mcc must be
different from that of
Read Only N/A N/A N/A
ShareMnc and
ShareMcc.
ShareMnc in a
UtranExternalCellPl
mn MO consists of
digits only.

SectorId104 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 26
digits. A
hexadecimal
number is
Read Only N/A N/A N/A
composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.
SectorId24 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
number is
Read Only N/A N/A N/A
composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

Mcc in an
No (And no impact
Cdma2000HrpdExt
Read & Write on the UE in idle N/A N/A
Cell MO consists of
mode)
digits only.

Mnc in an
No (And no impact
Cdma2000HrpdExt
Read & Write on the UE in idle N/A N/A
Cell MO consists of
mode)
digits only.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
Cdma2000External
Cell MO, CellName
is a string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
No (And no impact
characters:double
Read & Write on the UE in idle N/A N/A
quotation marks ("),
mode)
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+), two or
more blanks, and
two or more
percentage signs
(%).
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

Mcc in an
No (And no impact
Cdma20001XrttExt
Read & Write on the UE in idle N/A N/A
Cell MO consists of
mode)
digits only.
Mnc in an
No (And no impact
Cdma20001XrttExt
Read & Write on the UE in idle N/A N/A
Cell MO consists of
mode)
digits only.

MscId in the
Cdma20001XrttExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
No (And no impact
number is
Read & Write on the UE in idle N/A N/A
composed of upper-
mode)
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

In the
Cdma20001XrttNC
ell MO,
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following No (And no impact
characters: double Read & Write on the UE in idle N/A N/A
quotation marks ("), mode)
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+), two or
more blanks, and
two or more
percentage signs
(%).
In the
Cdma20001XRTTN
cell MO,
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following No (And no impact
characters:double Read & Write on the UE in idle N/A N/A
quotation marks ("), mode)
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+), two or
more blanks, and
two or more
percentage signs
(%).
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If
Cdma20001XrttCell
ReselInd is set to
CFG,
Cdma20001XrttCell
ReselPri must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If
mode)
Cdma20001XrttCell
ReselInd is set to
NOT_CFG,
Cdma20001XrttCell
ReselPri does not
need to be set.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If
Cdma2000HrpdCell
ReselInd is set to
CFG,
Cdma2000HrpdCell
ReselPri must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If
mode)
Cdma2000HrpdCell
ReselInd is set to
NOT_CFG,
Cdma2000HrpdCell
ReselPri does not
need to be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Mcc in a
GeranExternalCell
Read Only N/A N/A N/A
MO consists of
digits only.

Mnc in a
GeranExternalCell
Read Only N/A N/A N/A
MO consists of
digits only.
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If RacCfgInd is set
to CFG, this
parameter must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If RacCfgInd is set
mode)
to NOT_CFG, this
parameter does not
need to be set.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the
GeranExternalCell
MO, the value of
CellName is a string
of a maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
No (And no impact
quotation marks ("),
Read & Write on the UE in idle N/A N/A
commas (,),
mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write No N/A N/A
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

Mcc in a
GeranNcell MO
Read Only N/A N/A N/A
consists of digits
only.

Mnc in a
GeranNcell MO
Read Only N/A N/A N/A
consists of digits
only.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

In the GeranNcell
MO, the value of
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
No (And no impact
quotation marks ("),
Read & Write on the UE in idle N/A N/A
commas (,),
mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

In the GeranNcell
MO, the value of
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
No (And no impact
quotation marks ("),
Read & Write on the UE in idle N/A N/A
commas (,),
mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If
CellReselPriorityCfg
Ind is set to CFG,
CellReselPriority
must be set.
No (And no impact
If
Read & Write on the UE in idle N/A N/A
CellReselPriorityCfg
mode)
Ind is set to
NOT_CFG,
CellReselPriority
does not need to be
set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If
PmaxGeranCfgInd
is set to CFG,
PmaxGeran must
No (And no impact
be set.
Read & Write on the UE in idle N/A N/A
If
mode)
PmaxGeranCfgInd
is set to NOT_CFG,
PmaxGeran does
not need to be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

The sum of the

value of
PhyCellIdRange(n1
is 1, n4 is 4, n8 is
8,and so on) and
Read Only N/A N/A N/A
the value of
PhyCellId must be
smaller than 504 in
the IntraFreqBlkCell
MO.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

The sum of the

value of
PhyCellIdRange(n1
is 1, n4 is 4, n8 is
No (And no impact
8,and so on) and
Read & Write on the UE in idle N/A N/A
the value of
mode)
PhyCellId must be
smaller than 504 in
the IntraFreqBlkCell
MO.
None Read Only N/A N/A N/A

Mcc in an
EutranIntraFreqNC
Read Only N/A N/A N/A
ell MO consists of
digits only.

Mnc in an
EutranIntraFreqNC
Read Only N/A N/A N/A
ell MO consists of
digits only.
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

In the
EutranIntraFreqNC
ell MO, the value of
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double No (And no impact
quotation marks ("), Read & Write on the UE in idle N/A N/A
commas (,), mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
In the
EutranIntraFreqNC
ell MO, the value of
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters: double No (And no impact
quotation marks ("), Read & Write on the UE in idle N/A N/A
commas (,), mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

coordination (eICIC)
takes effect only
when homing
relationships
between macro and
micro cells are
configured. After
dynamic eICIC is
enabled and
homing
relationships
between macro and
micro cells are
modified, the
almost-blank
subframe (ABS) of
the new homing
macro cell may
No (And no impact
differ from that of
Read & Write on the UE in idle N/A N/A
the original homing
mode)
macro cell.
However, to
decrease signaling
overheads in the
RRC layer, the
micro cells whose
homing
relationships are
modified do not
initiate CRE and
measurement
subset
reconfiguration for
UEs that have
already accessed
the cells. As a
result, these UEs
may suffer stronger
None Read Only N/A N/A N/A

DlEarfcn in an
EutranInterNFreq
MO must be a valid
frequency.
In an
EutranInterNFreq Read Only N/A N/A N/A
MO, if DlEarfcn is
specific to band 29,
UlEarfcnCfgInd
must be set to
NOT_CFG.

In an
EutranInterNFreq
MO, if DlEarfcn is No (And no impact
specific to band 29, Read & Write on the UE in idle N/A N/A
UlEarfcnCfgInd mode)
must be set to
NOT_CFG.
UlEarfcn in an
EutranInterNFreq
MO must be a valid
frequency.
If UlEarfcnCfgInd is
No (And no impact
set to CFG,
Read & Write on the UE in idle N/A N/A
UlEarfcn must be
mode)
set.
If UlEarfcnCfgInd is
set to NOT_CFG,
UlEarfcn does not
need to be set.

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
If
CellReselPriorityCfg
Ind is set to CFG,
CellReselPriority
No (Modifications
must be set.
on this parameter
If
Read & Write will affect cell N/A N/A
CellReselPriorityCfg
reselection of the
Ind is set to
UE in idle mode.)
NOT_CFG,
CellReselPriority
does not need to be
set.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
If the
SpeedDependSPCf
gInd parameter is
set to CFG, the
TReselEutranSfMe
dium parameter No (Modifications
must be set. on this parameter
If the Read & Write would affect cell N/A N/A
SpeedDependSPCf reselection of the
gInd parameter is UE in idle mode.)
set to NOT_CFG,
the
TReselEutranSfHig
h parameter does
not need to be set.

If the
SpeedDependSPCf
gInd parameter is
set to CFG, the
TReselEutranSfHig
h parameter must No (Modifications
be set. on this parameter
If the Read & Write would affect cell N/A N/A
SpeedDependSPCf reselection of the
gInd parameter is UE in idle mode.)
set to NOT_CFG,
the
TReselEutranSfHig
h parameter does
not need to be set.
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
A larger value of
this parameter
leads to a lower
probability of a cell
meeting criteria S
and becoming a
suitable cell for cell
No (Modifications
selection. A smaller
on this parameter
value of this
Read & Write would affect cell N/A N/A
parameter leads to
reselection of the
a higher probability.
UE in idle mode.)
Set this parameter
properly so that the
selected cell can
provide signals that
meet the quality
requirement of
basic services.

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
If PmaxCfgInd is
set to CFG, Pmax No (Modifications
must be set. on this parameter
If PmaxCfgInd is Read & Write would affect cell N/A N/A
set to NOT_CFG, reselection of the
Pmax does not UE in idle mode.)
need to be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
 No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)

No (Modifications
on this parameter
None Read & Write would affect cell N/A N/A
reselection of the
UE in idle mode.)
If QqualMinCfgInd
is set to CFG, this
No (Modifications
parameter must be
on this parameter
set.
Read & Write would affect cell N/A N/A
If QqualMinCfgInd
reselection of the
is set to NOT_CFG,
UE in idle mode.)
this parameter does
not need to be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (Modifications
on this parameter
None Read & Write will affect cell N/A N/A
reselection of the
UE in idle mode.)
The sum of
IdleMlbUERelease No (Modifications
Ratio in all on this parameter
EutranInterNFreq Read & Write will affect cell N/A N/A
MOs of the same reselection of the
cell cannot exceed UE in idle mode.)
100.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

DlEarfcn in an
InterFreqBlkCell
Read Only N/A N/A N/A
MO must be a valid
frequency.

The sum of the

value of
PhyCellIdRange(n1
is 1, n4 is 4, n8 is
8,and so on) and
Read Only N/A N/A N/A
the value of
PhyCellId must be
smaller than 504 in
the InterFreqBlkCell
MO.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

The sum of the

value of
PhyCellIdRange(n1
is 1, n4 is 4, n8 is
No (And no impact
8,and so on) and
Read & Write on the UE in idle N/A N/A
the value of
mode)
PhyCellId must be
smaller than 504 in
the InterFreqBlkCell
MO.
None Read Only N/A N/A N/A

Mcc in an
EutranInterFreqNC
Read Only N/A N/A N/A
ell MO consists of
digits only.

Mnc in an
EutranInterFreqNC
Read Only N/A N/A N/A
ell MO consists of
digits only.
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A

In the
EutranInterFreqNC
ell MO, the value of
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double No (And no impact
quotation marks ("), Read & Write on the UE in idle N/A N/A
commas (,), mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

In the
EutranInterFreqNC
ell MO, the value of
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double No (And no impact
quotation marks ("), Read & Write on the UE in idle N/A N/A
commas (,), mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

Mcc in an
EutranExternalCell
Read Only N/A N/A N/A
MO consists of
digits only.
Mnc in an
EutranExternalCell
Read Only N/A N/A N/A
MO consists of
digits only.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

DlEarfcn in an
EutranExternalCell
MO must be a valid
frequency.
In an No (And no impact
EutranExternalCell Read & Write on the UE in idle N/A N/A
MO, if DlEarfcn is mode)
specific to band 29,
UlEarfcnCfgInd
must be set to
NOT_CFG.

In an
EutranExternalCell
MO, if DlEarfcn is No (And no impact
specific to band 29, Read & Write on the UE in idle N/A N/A
UlEarfcnCfgInd mode)
must be set to
NOT_CFG.
UlEarfcn in an
EutranExternalCell
MO must be a valid
frequency.
If UlEarfcnCfgInd is
No (And no impact
set to CFG,
Read & Write on the UE in idle N/A N/A
UlEarfcn must be
mode)
set.
If UlEarfcnCfgInd is
set to NOT_CFG,
UlEarfcn does not
need to be set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the
EutranExternalCell
MO, the value of
CellName is a string
of a maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
No (And no impact
quotation marks ("),
Read & Write on the UE in idle N/A N/A
commas (,),
mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read & Write No N/A N/A
None Read & Write N/A N/A N/A
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
optional, depending No (And no impact
on the setting of Read & Write on the UE in idle N/A N/A
Cdma1XrttCellRese mode)
lPriInd.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
optional, depending No (And no impact
on the setting of Read & Write on the UE in idle N/A N/A
HrpdCellReselDedi mode)
PriCfgInd.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

This parameter is
optional, depending No (And no impact
on the setting of Read & Write on the UE in idle N/A N/A
CellReselPriorityCfg mode)
Ind.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
optional, depending No (And no impact
on the setting of Read & Write on the UE in idle N/A N/A
CellReselDediPriCf mode)
gInd.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
optional, depending No (And no impact
on the setting of Read & Write on the UE in idle N/A N/A
CellReselDediPriCf mode)
gInd.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
optional, depending No (And no impact
on the setting of Read & Write on the UE in idle N/A N/A
CellReselPriorityCfg mode)
Ind.

None Read Only N/A N/A N/A

Mcc in a UtranNCell
MO consists of Read Only N/A N/A N/A
digits only.

Mnc in a UtranNCell
MO consists of Read Only N/A N/A N/A
digits only.
In the UtranNCell
MO, if the RncId
parameter is set to
a value larger than
4095, CellId Read Only N/A N/A N/A
parameter must be
set to a value
smaller than or
equal to 4095.
In the UtranNCell
MO, if the RncId
parameter is set to
a value larger than
4095, CellId Read Only N/A N/A N/A
parameter must be
set to a value
smaller than or
equal to 4095.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A
In the UtranNCell
MO, the value of
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
No (And no impact
quotation marks ("),
Read & Write on the UE in idle N/A N/A
commas (,),
mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

In the UtranNCell
MO, the value of
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
No (And no impact
quotation marks ("),
Read & Write on the UE in idle N/A N/A
commas (,),
mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

This parameter is
optional, depending No (And no impact
on the setting of Read & Write on the UE in idle N/A N/A
CellReselDediPriCf mode)
gInd.
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
This parameter is
optional, depending No (And no impact
on the setting of Read & Write on the UE in idle N/A N/A
CellReselPriorityCfg mode)
Ind.

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
1. If
UtranUlArfcnCfgInd
is set to CFG,
UtranUlArfcn must
be set. If
UtranUlArfcnCfgInd
No (And no impact
is set to NOT_CFG,
Read & Write on the UE in idle N/A N/A
UtranUlArfcn does
mode)
not need to be set.
2. The DL UARFCN
and UL UARFCN
must be in the
same frequency
band.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
If
CellReselPriorityCfg
Ind is set to CFG,
CellReselPriority
must be set.
No (And no impact
If
Read & Write on the UE in idle N/A N/A
CellReselPriorityCfg
mode)
Ind is set to
NOT_CFG,
CellReselPriority
does not need to be
set.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Qqualmin must be
set if No (And no impact
UtranFddTddType Read & Write on the UE in idle N/A N/A
is set to mode)
UTRAN_FDD.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
ThreshXHighQ
must be set if No (And no impact
UtranFddTddType Read & Write on the UE in idle N/A N/A
is set to mode)
UTRAN_FDD.
ThreshXLowQ must
be set if No (And no impact
UtranFddTddType Read & Write on the UE in idle N/A N/A
is set to mode)
UTRAN_FDD.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Mcc in a
UtranExternalCell
Read Only N/A N/A N/A
MO consists of
digits only.
Mnc in a
UtranExternalCell
Read Only N/A N/A N/A
MO consists of
digits only.

In the
UtranExternalCell
MO, if the RncId
parameter is set to
a value larger than
Read Only N/A N/A N/A
4095, CellId
parameter must be
set to a value
smaller than or
equal to 4095.
In the
UtranExternalCell
MO, if the RncId
parameter is set to
a value larger than
Read Only N/A N/A N/A
4095, CellId
parameter must be
set to a value
smaller than or
equal to 4095.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
When
UtranUlArfcnCfgInd
is set to CFG,
UtranUlArfcn must
be set. No (And no impact
If Read & Write on the UE in idle N/A N/A
UtranUlArfcnCfgInd mode)
is set to NOT_CFG,
UtranUlArfcn does
not need to be
configured.

In a
UtranExternalCell
MO, PScrambCode
cannot exceed 127
if UtranFddTddType
is set to
UTRAN_TDD. No (And no impact
In a Read & Write on the UE in idle N/A N/A
UtranExternalCell mode)
MO, if
UtranFddTddType
is set to
UTRAN_TDD,
MultiBand is
forbidden.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If RacCfgInd is set
to CFG, this
parameter must be
No (And no impact
set.
Read & Write on the UE in idle N/A N/A
If RacCfgInd is set
mode)
to NOT_CFG, this
parameter does not
need to be set.

In a
UtranExternalCell
MO, PScrambCode No (And no impact
cannot exceed 127 Read & Write on the UE in idle N/A N/A
if UtranFddTddType mode)
is set to
UTRAN_TDD.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the
UtranExternalCell
MO, the value of
CellName is a string
of a maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
No (And no impact
quotation marks ("),
Read & Write on the UE in idle N/A N/A
commas (,),
mode)
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In a
UtranExternalCell
MO, if
No (And no impact
UtranFddTddType
Read & Write on the UE in idle N/A N/A
is set to
mode)
UTRAN_TDD,
MultiBand is
forbidden.

None Read Only N/A N/A N/A

None Read & Write No N/A N/A
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read Only N/A N/A N/A
None Read Only N/A N/A N/A
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In a
BbpCollaborateGrp
MO, if
BbpCollaborateTrig
gerThd is set to a
non-zero value,
BbpCollaborateCle
arThd cannot be set
to 0.
In a
BbpCollaborateGrp
MO, if
BbpCollaborateCle
arThd is set to a
non-zero value,
BbpCollaborateTrig No (And no impact
gerThd cannot be Read & Write on the UE in idle N/A N/A
set to 0. mode)
In a
BbpCollaborateGrp
MO, if both
BbpCollaborateTrig
gerThd and
BbpCollaborateCle
arThd are set to
non-zero values,
the value of
BbpCollaborateTrig
gerThd must be
greater than the
value of
BbpCollaborateCle
arThd.
In a
BbpCollaborateGrp
MO, if
BbpCollaborateTrig
gerThd is set to a
non-zero value,
BbpCollaborateCle
arThd cannot be set
to 0.
In a
BbpCollaborateGrp
MO, if
BbpCollaborateCle
arThd is set to a
non-zero value,
BbpCollaborateTrig No (And no impact
gerThd cannot be Read & Write on the UE in idle N/A N/A
set to 0. mode)
In a
BbpCollaborateGrp
MO, if both
BbpCollaborateTrig
gerThd and
BbpCollaborateCle
arThd are set to
non-zero values,
the value of
BbpCollaborateTrig
gerThd must be
greater than the
value of
BbpCollaborateCle
arThd.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

Less than 0.1

None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A
 This command
affects all cells
Less than 0.1
None Read & Write Yes established on
minute
LBBPd3 boards in
the eNodeB.
 All SFN cells in the
None Read & Write Yes 1 minute
eNodeB
 All cells served by Less than 0.1
None Read & Write Yes
the eNodeB minute

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

In the
LIOPTFUNCTION
MO,
IOptFunctionName
is a string of a
maximum of 64
characters. The
string cannot be
null characters or
contain any of the
following
characters: double Read & Write N/A N/A N/A
quotation marks ("),
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+++), two or
more blanks, and
two or more
percentage signs
(%).

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

Mcc in a
NCellPlmnList MO
Read Only N/A N/A N/A
consists of digits
only.

Mnc in a
NCellPlmnList MO
Read Only N/A N/A N/A
consists of digits
only.

In a NCellPlmnList
MO, PlmnListType
can be set to a
maximum of two Read Only N/A N/A N/A
values for PLMNs
with the same value
of RatType.
In a NCellPlmnList
MO, PlmnListType
can be set to a
maximum of two Read & Write N/A N/A N/A
values for PLMNs
with the same value
of RatType.

PccDlEarfcn in an
PccFreqCfg MO
Read Only N/A N/A N/A
must be a valid
frequency.
None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
None Read & Write No N/A N/A

None Read & Write No N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

PccDlEarfcn in an
SccFreqCfg MO
Read Only N/A N/A N/A
must be a valid
frequency.
SccDlEarfcn in an
SccFreqCfg MO
Read Only N/A N/A N/A
must be a valid
frequency.

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

In a SccFreqCfg
MO, the value of No (And no impact
BlindScellAddThd Read & Write on the UE in idle N/A N/A
must be larger than mode)
BlindScellDelThd.
In a SccFreqCfg
MO, the value of No (And no impact
BlindScellAddThd Read & Write on the UE in idle N/A N/A
must be larger than mode)
BlindScellDelThd.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write Yes Cell Less than 1 minute

None Read & Write Yes Cell Less than 1 minute

None Read & Write Yes Cell Less than 1 minute

None Read & Write Yes Cell Less than 1 minute

The parameter is
used only when the No (And no impact
PROTOCOL Read & Write on the UE in idle N/A N/A
parameter is set to mode)
TDL_IR.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

In a QosPolicy MO,
if TrafficType is set
to VIDEO, DlSgbr
must be set to a
value greater than 0
and DlSmbr must
be set to 0.
In a QosPolicy MO,
if TrafficType is set
to DOWNLOAD,
DlSgbr must be set
to 0 and DlSmbr
must be set to a
value greater than No (And no impact
0. Read & Write on the UE in idle N/A N/A
In a QosPolicy MO, mode)
if TrafficType is set
to VIDEO,
PriQueueId must be
set to QUEUE5,
QUEUE6, or
QUEUE7.
In a QosPolicy MO,
if TrafficType is set
to DOWNLOAD,
PriQueueId must be
set to QUEUE0,
QUEUE1, or
QUEUE2.

In a QosPolicy MO,
if TrafficType is set
to VIDEO,
PriQueueId must be
set to QUEUE5,
QUEUE6, or
No (And no impact
QUEUE7.
Read & Write on the UE in idle N/A N/A
In a QosPolicy MO,
mode)
if TrafficType is set
to DOWNLOAD,
PriQueueId must be
set to QUEUE0,
QUEUE1, or
QUEUE2.
In a QosPolicy MO,
if TrafficType is set
to VIDEO, DlSgbr
must be set to a
value greater than 0
and DlSmbr must
be set to 0. No (And no impact
In a QosPolicy MO, Read & Write on the UE in idle N/A N/A
if TrafficType is set mode)
to DOWNLOAD,
DlSgbr must be set
to 0 and DlSmbr
must be set to a
value greater than
0.

In a QosPolicy MO,
if TrafficType is set
to VIDEO, DlSgbr
must be set to a
value greater than 0
and DlSmbr must
be set to 0. No (And no impact
In a QosPolicy MO, Read & Write on the UE in idle N/A N/A
if TrafficType is set mode)
to DOWNLOAD,
DlSgbr must be set
to 0 and DlSmbr
must be set to a
value greater than
0.

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Under all
SsrdCellGroup
MOs, the
PrimaryLocalCellID
parameter and the Read Only N/A N/A N/A
SsrdLocalCellID
parameter must be
set to unique
values.
Under all
SsrdCellGroup
MOs, the
PrimaryLocalCellID
parameter and the Read Only N/A N/A N/A
SsrdLocalCellID
parameter must be
set to unique
values.
None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read & Write N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

None Read Only N/A N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
CspcAlgoPara MO,
No (And no impact
TddCspcAlgoSwitch
Read & Write on the UE in idle N/A N/A
and
mode)
CspcAlgoSwitch are
mutually exclusive.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
CspcAlgoPara MO,
No (And no impact
TddCspcAlgoSwitch
Read & Write on the UE in idle N/A N/A
and
mode)
CspcAlgoSwitch are
mutually exclusive.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)

No (And no impact
None Read Only on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

HoAlgoSwitch
parameter in the
ENodeBAlgoSwitch
is On, the
ServiceBasedInterF
reqHoSwitch,
UtranServiceHoSwit
ch,
GeranServiceHoSw
itch,
CdmaHrpdServiceH
oSwitch, or
Cdma1xRttService
HoSwitch check
box under the
HoAlgoSwitch
parameter in the
ENodeBAlgoSwitch
No (And no impact
cannot be On.
Read & Write on the UE in idle N/A N/A
If any of the
mode)
ServiceBasedInterF
reqHoSwitch,
UtranServiceHoSwit
ch,
GeranServiceHoSw
itch,
CdmaHrpdServiceH
oSwitch, or
Cdma1xRttService
HoSwitch checkbox
under the
HoAlgoSwitch
parameter in the
ENodeBAlgoSwitch
is On, the
ServiceReqInterFre
qHoSwitch check
box under the
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
Cells with
customized
bandwidths support
only static ICIC.
The No (And no impact
DlIcicDynamicSwitc Read & Write on the UE in idle N/A N/A
h_ON_ENUM and mode)
DlIcicReuse3Switch
_ON_ENUM values
do not take effect
for these cells.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read & Write No N/A N/A

 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If
CaAdpPreSchSwitc
h of CaAlgoSwitch
in
No (And no impact
ENodeBAlgoSwitch
Read & Write on the UE in idle N/A N/A
is set to On,
mode)
CaPreSchSwitch of
CaAlgoSwitch in
ENodeBAlgoSwitch
can be set to On.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

Yes (And impact on

None Read & Write the UE in idle eNodeB at all times
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A 0
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
The
CompactRANMultiA
PN parameter in
the
ENodeBAlgoSwitch Yes (And impact on
MO can be set to Read & Write the UE in idle eNodeB at all times
ON(On) only when mode)
the
EUCompactRANSw
itch parameter is
set to ON(On).

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

The sum of TrfRatio
in all
LicRatioSharePolicy
MOs cannot exceed
100. No (And no impact
In the Read & Write on the UE in idle N/A N/A
LicRatioSharePolicy mode)
MO,
TrfSharingRatio
cannot exceed
TrfRatio.

In the
LicRatioSharePolicy
No (And no impact
MO,
Read & Write on the UE in idle N/A N/A
TrfSharingRatio
mode)
cannot exceed
TrfRatio.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the MRO MO,
InterFreqA2RollBac
No (And no impact
kThd must be
Read & Write on the UE in idle N/A N/A
smaller than
mode)
InterFreqMeasTooL
ateHoThd.

In the MRO MO,

InterFreqA2RollBac
No (And no impact
kThd must be
Read & Write on the UE in idle N/A N/A
smaller than
mode)
InterFreqMeasTooL
ateHoThd.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Less than 0.1
None Read & Write Yes Cell
minute

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
In the VQMAlgo
MO,
VqiExcellentThd
must be larger than No (And no impact
VqiGoodThd. Read & Write on the UE in idle N/A N/A
In the VQMAlgo mode)
MO, VqiGoodThd
must be larger than
VqiPoorThd.

In the VQMAlgo
MO, VqiGoodThd
must be larger than
No (And no impact
VqiPoorThd.
Read & Write on the UE in idle N/A N/A
In the VQMAlgo
mode)
MO, VqiPoorThd
must be larger than
VqiBadThd.
In the VQMAlgo
No (And no impact
MO, VqiPoorThd
Read & Write on the UE in idle N/A N/A
must be larger than
mode)
VqiBadThd.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the VQMAlgo
MO, No (And no impact
VqiExcellentThd Read & Write on the UE in idle N/A N/A
must be larger than mode)
VqiGoodThd.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
eNBLicenseAlmThd No (And no impact
MO, RTHD must be Read & Write on the UE in idle N/A N/A
smaller than or mode)
equal to OTHD.
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

In the
eNBLicenseAlmThd No (And no impact
MO, RTHD must be Read & Write on the UE in idle N/A N/A
smaller than or mode)
equal to OTHD.

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

If
AutoPowerOffSwitc
h is set to ON,
None Read & Write Yes eNodeB services are
interrupted from
PowerOffTime to
PowerOnTime.
In the
eNodeBAutoPower
Off MO,
PowerOffTime must
be set to a time in
the range of
22:00:00 to
05:00:00 of the next
day.
In the
If
eNodeBAutoPower
AutoPowerOffSwitc
Off MO, the value of
h is set to ON,
PowerOnTime must
Read & Write Yes eNodeB services are
be one hour later
interrupted from
than that of
PowerOffTime to
PowerOffTime.
PowerOnTime.
If
AutoPowerOffSwitc
h is set to ON,
PowerOffTime must
be set.
If
AutoPowerOffSwitc
h is set to OFF,
PowerOffTime does
not need to be set.

In the
eNodeBAutoPower
Off MO,
PowerOnTime must
be set to a time in
the range of
23:00:00 to
06:00:00 of the next
day.
In the
If
eNodeBAutoPower
AutoPowerOffSwitc
Off MO, the value of
h is set to ON,
PowerOnTime must
Read & Write Yes eNodeB services are
be one hour later
interrupted from
than that of
PowerOffTime to
PowerOffTime.
PowerOnTime.
If
AutoPowerOffSwitc
h is set to ON,
PowerOnTime must
be set.
If
AutoPowerOffSwitc
h is set to OFF,
PowerOnTime does
not need to be set.
None Read Only N/A N/A N/A

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)

No (And no impact
None Read & Write on the UE in idle N/A N/A
mode)
 Impact on Radio
Validation of Introduced in
Caution Network Attribute
Modification Version...
Performance

BTS3900:
V100R008C00
None N/A None BTS3900 LTE: Radio
V100R003C00

BTS3900:
V100R008C00
None N/A None BTS3900 LTE: Radio
V100R003C00

BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R003C00
equipment.

BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R005C00
equipment.

BTS3900:
V100R008C00
None N/A None BTS3900 LTE: Radio
V100R008C00
 BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R008C00
equipment.

BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R008C00
equipment.
 BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R008C00
equipment.
 BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R008C00
equipment.
 BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R008C00
equipment.
 BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R008C00
equipment.
 BTS3900:
The parameter
V100R010C10
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R010C10
equipment.

BTS3900:
The parameter
V100R011C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R011C00
equipment.
 BTS3900:
The parameter
V100R011C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R011C00
equipment.

BTS3900:
The parameter
V100R011C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R011C00
equipment.

BTS3900:
V100R008C00
None N/A None BTS3900 LTE: Radio
V100R008C00
 BTS3900:
V100R008C00
None N/A None BTS3900 LTE: Radio
V100R003C00

BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R008C00
equipment.

BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R008C00
equipment.

BTS3900:
V100R008C00
None N/A None BTS3900 LTE: Radio
V100R003C00
 BTS3900:
V100R008C00
None N/A None BTS3900 LTE: Radio
V100R003C00

BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R003C00
equipment.

BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R005C00
equipment.
 Only the
ServiceHoBearerPo
licy parameter for
QCIs 1 and 2 can
be set to
SERVICE_HO_QCI BTS3900:
The parameter
_NOT_ALLOWED. V100R009C00
modification has no
None If the BTS3900 LTE: Radio
impact on the
ServiceHoBearerPo V100R009C00
equipment.
licy parameter for
other QCIs is set to
SERVICE_HO_QCI
_NOT_ALLOWED,
default bearers are
removed.
 set to 0, the
network
performance is not
affected. If this
parameter is set to
a value ranging
from 1 to 15, a
larger value
indicates a lower
priority. During
access admission,
UEs are admitted
based on the ARP
confirmed on the
eNodeB. In this
case, a higher ARP
leads to a higher
BTS3900:
The parameter admission success
V100R011C00
modification has no rate. During inter-
None BTS3900 LTE: Radio
impact on the RAT cell shutdown,
V100R011C00
equipment. carriers are shut
down based on the
ARP configured on
the eNodeB. In this
case, a higher ARP
leads to a lower
carrier shutdown
success rate.
During inter-
frequency MLB,
UEs are selected
based on the ARP
configured on the
eNodeB. In this
case, a higher
priority leads to a
lower probability
that a UE is

BTS3900:
V100R008C00
None N/A None BTS3900 LTE: Radio
V100R003C00
 BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R003C00
equipment.
 BTS3900:
The parameter
V100R008C00
modification has no
None None BTS3900 LTE: Radio
impact on the
V100R003