Bookbinding Tutorial
Now take your paper and gather them into sigmatures.1 take 4
pieces but you can choose a different amount. | wouldn't
recommend using more than 6Now comes the most dimcult part. Practice this on scrap paper
first and take your time so you won't have to redo anything. Take
your thread and your first signature. When sewing. remember to
Go in from the outside of the folded paper
Remember to keep the thread tight!
An inside lookand tie it to the string from the start. Use binder clips to keep
the book flat. Continue with the thirc,
When you reach the end of the third...When you reach the end and have sewn all of the sig
it looks like thic.6.25"x.75" for the spine and both covers will be 6.25" = 4.75"
Cur your fabric so there's about .5" border around it and cut the
corners to be a 45°
Den't overcut! Especially the cornerst
Glue the edge over the chipboard, put weight onit and let it dry.Close the book (while making sure the canvas has been glued i
Place} and let the book dry under some weight.
Take your endsheets and measure both (for the front and back)
te be the e size orignal paper. For my 6" x 4.5" book
my endsheets will be 6" x 9" each.
Fold it in half and make sure it fits nicely between the cover and
the first page of your book.