Escolar Documentos
Profissional Documentos
Cultura Documentos
16024
Electrical data
Advantages
Accuracy - Dynamic performance data
●● Excellent accuracy
X Accuracy @ IPN , TA = 25°C @ ± 15 V (± 5 %) ± 0.65 % ●● Very good linearity
@ ± 12 .. 15 V (± 5 %) ± 0.90 % ●● Low temperature drift
ε
L
Linearity error < 0.15 % ●● Optimized response time
Typ Max ●● Wide frequency bandwidth
IO Offset current @ IP = 0, TA = 25°C ± 0.10 mA ●● No insertion losses
IOM Magnetic offset current 1) @ IP = 0 and specified RM, ●● High immunity to external
after an overload of 3 x IPN ± 0.15 mA interference
IOT Temperature variation of IO - 25°C .. + 85°C ± 0.05 ± 0.30 mA ●● Current overload capability.
- 40°C .. - 25°C ± 0.10 ± 0.50 mA
tra Reaction time to 10 % of IPN step < 500 ns Applications
t r Response time 2) to 90 % of IPN step < 1 µs
●● AC variable speed drives and
di/dt di/dt accurately followed > 200 A/µs
servo motor drives
BW Frequency bandwidth (- 1 dB) DC .. 200 kHz
●● Static converters for DC motor
drives
General data ●● Battery supplied applications
●● Uninterruptible Power Supplies
TA Ambient operating temperature - 40 .. + 85 °C (UPS)
TS Ambient storage temperature - 40 .. + 90 °C ●● Switched Mode Power Supplies
RS Secondary coil resistance @ TA = 70°C 145 Ω (SMPS)
@ TA = 85°C 150 Ω ●● Power supplies for welding
m Mass 18 g applications.
Standards EN 50178: 1997
Application domain
Notes: Result of the coercive field of the magnetic circuit
1)
●● Industrial.
2)
With a di/dt of 100 A/µs.
Page 1/3
090519/13 LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice. www.lem.com
Current Transducer LA 55-P/SP1
Isolation characteristics
Applications examples
Safety
When operating the transducer, certain parts of the module can carry hazardous
voltage (eg. primary busbar, power supply).
Ignoring this warning can lead to injury and/or cause serious damage.
This transducer is a build-in device, whose conducting parts must be inaccessible
after installation.
A protective housing or additional shield could be used.
Main supply must be able to be disconnected.
Page 2/3
090519/13 LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice. www.lem.com
Dimensions LA 55-P/SP1 (in mm. 1 mm = 0.0394 inch)
Front view
Connection
Page 3/3
090519/13 LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice. www.lem.com