Escolar Documentos
Profissional Documentos
Cultura Documentos
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS FXS PORT FXO PORT
MAC Address: WAN 00:0B:82:36:81:B1 LAN 00:0B:82:36:81:B0 (Device MAC)
WAN IP Address: 192.168.5.160
Product Model: HT503 V1.1B
Software Version: Program 1.0.5.5 Bootloader 1.0.0.15 Core 1.0.5.2 Base 1.0.5.2
System Up Time: 03:41:35 up 4 days
PPPoE Link Up: Disabled
NAT:
Port Status: Port Hook Registration DND Forward Busy Forward Delayed Forward
FXS On Hook Registered No
FXO Idle Registered No
All Rights Reserved Grandstream Networks, Inc. 20062008
http://192.168.5.160/cgibin/dologin 1/1
25/4/2016 Grandstream Device Configuration
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS FXS PORT FXO PORT
End User Password: (purposely not displayed for security protection)
Web Port: 80 (default for HTTP is 80)
Telnet Server: No Yes
IP Address: dynamically assigned via DHCP
DHCP hostname: HT503 (optional)
DHCP domain: (optional)
DHCP vendor class ID: HT500 (optional)
use PPPoE
PPPoE account ID:
PPPoE password:
PPPoE Service Name:
Preferred DNS server: 0 . 0 . 0 . 0
statically configured as:
IP Address: 192 . 168 . 5 . 160
Subnet Mask: 255 . 255 . 255 . 0
Default Router: 192 . 168 . 5 . 1
DNS Server 1: 80 . 58 . 61 . 250
DNS Server 2: 80 . 58 . 61 . 254
Time Zone: Using selfdefined Time Zone
SelfDefined Time Zone: MTZ+6MDT+5,M3.2.0,M11.1.0 (For example: "MTZ+6MDT+5,M4.1.0,M11.1.0")
Language: English
NAT/DHCP Server Information & Configuration:
Device Mode: NAT Router Bridge
NAT maximum ports: 1024 (range: 0 4096, default is 1024)
NAT TCP timeout: 3600 (range: 0 3600, default is 3600)
NAT UDP timeout: 300 (range: 0 3600, default is 300)
Uplink bandwidth: Disabled
Downlink bandwidth: Disabled
Enable UPnP support: No Yes
Reply to ICMP on WAN port: No Yes (Unit will not respond to PING from WAN side if set to No)
WAN side HTTP/Telnet access: No Yes (WAN side access will be rejected if set to No)
Cloned WAN MAC Addr: (in hex format)
Enable LAN DHCP: No Yes
LAN DHCP Base IP: 192.168.2.1 (base IP for the LAN port, default is 192.168.2.1)
LAN DHCP Start IP: 100 (default is 100)
LAN DHCP End IP: 199 (default is 199)
LAN Subnet Mask: 255.255.255.0 (default is 255.255.255.0)
DHCP IP Lease Time: 120 (in units of hours, default is 120 hours or 5 days)
DMZ IP:
WAN port 0 LAN IP LAN port 0 Protocol
TCP/UDP
WAN port 0 LAN IP LAN port 0 Protocol
TCP/UDP
WAN port 0 LAN IP LAN port 0 Protocol
TCP/UDP
WAN port 0 LAN IP LAN port 0 Protocol
TCP/UDP
Port Forwarding: WAN port 0
LAN IP LAN port 0 Protocol
http://192.168.5.160/cgibin/config2 1/2
25/4/2016 Grandstream Device Configuration
TCP/UDP
WAN port 0 LAN IP LAN port 0 Protocol
TCP Only
WAN port 0 LAN IP LAN port 0 Protocol
TCP/UDP
WAN port 0 LAN IP LAN port 0 Protocol
TCP/UDP
PSTN Access Code: *00 (Key pattern to use PSTN line. Maximum 5 digits. Default is "*00")
(Maximum 8 digits to authorize calling PSTN numbers from VoIP. No
PIN for VoIPtoPSTN Calls:
default)
(Maximum 8 digits to authorize calling VOIP terminals from PSTN. No
PIN for PSTNtoVoIP Calls:
default)
Unconditional Call Forward to (VoIP calls will be forwarded to the specified PSTN
PSTN: number)
User ID Sip Server Sip Destination Port
Unconditional Call Forward to 80
@ 192.168.5.251 : 5060
VOIP:
Update Cancel Reboot
All Rights Reserved Grandstream Networks, Inc. 20062008
http://192.168.5.160/cgibin/config2 2/2
25/4/2016 Grandstream Device Configuration
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS FXS PORT FXO PORT
Admin Password: (purposely not displayed for security protection)
Layer 3 QoS: 12 (DiffServ or Precedence value)
802.1Q/VLAN Tag 0 802.1p priority value 0 (07)
Layer 2 QoS:
802.1p priority value (NATed traffic) 0 (07)
STUN Server: (URI or IP:port)
Keepalive Interval: 20 (in seconds, default 20 seconds)
Use STUN to detect network No
connectivity: Yes, total STUN response misses 3 to restart DHCP client(mininum=3)
Firmware Upgrade and Provisioning: Upgrade Via TFTP HTTP HTTPS
Firmware Server Path: fm.grandstream.com/gs
Config Server Path: fm.grandstream.com/gs
XML Config File Password:
HTTP/HTTPS User Name:
HTTP/HTTPS Password:
Firmware File Prefix: Firmware File Postfix:
Config File Prefix: Config File Postfix:
Allow DHCP Option 66 to override server:
No Yes
Automatic Upgrade:
No Yes, every 10080 minutes(605256000).
Yes, daily at hour 1 (023). Yes, weekly on day 1 (06).
Always Check for New Firmware at Boot up
Check New Firmware only when F/W pre/suffix changes
Always Skip the Firmware Check
Authenticate Conf File: No Yes (cfg file would be authenticated before acceptance if set to Yes)
Firmware Key: (in Hexadecimal Representation)
SSL Certificate:
SSL Private Key:
SSL Private Key Password:
ACS URL:
ACS Username:
ACS Password:
Periodic Inform Enable: No Yes
Periodic Inform Interval: 300
http://192.168.5.160/cgibin/config 1/2
25/4/2016 Grandstream Device Configuration
Conncetion Request Username:
Connection Request Password:
c=2000/4000; (Syntax: c=on1/off1on2/off2
System Ring Cadence:
on3/off3;)
Dial Tone: f1=425@11,f2=425@11,c=0/0;
Ringback Tone: f1=425@11,f2=425@11,c=1500/3000;
Busy Tone: f1=425@11,f2=425@11,c=200/200;
Reorder Tone: f1=425@11,f2=425@11,c=200/200200/200200/600;
Call Progress Tones:
Confirmation Tone: f1=350@11,f2=440@11,c=100/100100/100100/100;
Call Waiting Tone: f1=440@13,c=300/10000300/100000/0;
(Syntax: f1=freq@vol[,f2=freq@vol[,c=on1/off1[on2/off2[
on3/off3]]]]);
(Note: freq: 0 4000Hz; vol: 30 0dBm; Cadence on and off are in milliseconds)
Lock Keypad Update: No Yes (configuration update via keypad is disabled if set to Yes)
Disable Voice Prompt: No Yes (voice prompt is disabled if set to Yes)
Disable Direct IP Call: No Yes (direct IP call is disabled if set to Yes)
Life Line Mode: Auto Always Disconnected Always Connected
NTP Server: us.pool.ntp.org (URI or IP address)
Syslog Server:
Syslog Level: NONE
Download Device Configuration: Download
Update Cancel Reboot
All Rights Reserved Grandstream Networks, Inc. 20062008
http://192.168.5.160/cgibin/config 2/2
4/5/2016 Grandstream Device Configuration
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS FXS PORT FXO PORT
Account Active: No Yes
Primary SIP Server: 192.168.5.251 (e.g., sip.mycompany.com, or IP address)
Failover SIP Server: (Optional, used when primary server no response)
http://192.168.5.160/cgibin/config_a1 1/3
4/5/2016 Grandstream Device Configuration
Ring Tone 1 used if incoming caller ID is
Distinctive Ring Tone: Ring Tone 1 used if incoming caller ID is
Ring Tone 1 used if incoming caller ID is
Disable CallWaiting: No Yes
Disable CallWaiting Caller ID: No Yes
Disable CallWaiting Tone: No Yes
Disable Receiver Offhook Tone: No Yes (ROH tone will not be played after offhook for 60 seconds)
Disable Reminder Ring for OnHold Call: No Yes
Disable Visual MWI: No Yes
Ring Timeout: 60 (10300, default is 60 seconds)
Delayed Call Forward Wait Time: 20 (Allowed range 1120, in seconds.)
No Key Entry Timeout: 4 (in seconds, default is 4 seconds)
Early Dial: No Yes (use "Yes" only if proxy supports 484 response)
Dial Plan Prefix: (this prefix string is added to each dialed number)
Use # as Dial Key: No Yes (if set to Yes, "#" will function as the "(Re)Dial" key)
Dial Plan: { x+ | *x+ }
SUBSCRIBE for MWI: No, do not send SUBSCRIBE for Message Waiting Indication
Yes, send periodical SUBSCRIBE for Message Waiting Indication
Send Anonymous: No Yes (caller ID will be blocked if set to Yes)
Anonymous Call Rejection: No Yes
Special Feature: Standard
Session Expiration: 180 (in seconds. default 180 seconds)
MinSE: 90 (in seconds. default and minimum 90 seconds)
Caller Request Timer: No Yes (Request for timer when making outbound calls)
Callee Request Timer: No Yes (When caller supports timer but did not request one)
Force Timer: No Yes (Use timer even when remote party does not support)
UAC Specify Refresher: UAC UAS Omit (Recommended)
UAS Specify Refresher: UAC UAS (When UAC did not specify refresher tag)
Force INVITE: No Yes (Always refresh with INVITE instead of UPDATE)
Send ReINVITE After Fax: No Yes
Enable 100rel: No Yes
Use First Matching Vocoder in 200OK
SDP: No
Yes
Preferred Vocoder: choice 1: PCMU
(in listed order) choice 2: PCMA
choice 3: G723
choice 4: G729
choice 5: G72632
choice 6: iLBC
choice 7: G729E
choice 8: AAL2G72616
G723 Rate: 6.3kbps encoding rate 5.3kbps encoding rate
iLBC Frame Size: 20ms 30ms
iLBC Payload Type: 97 (between 96 and 127, default is 97)
AAL2G72616 Payload Type: 100 (between 96 and 127, default is 100)
AAL2G72624 Payload Type: 99 (between 96 and 127, default is 99)
AAL2G72632 payload type: 104 (between 96 and 127, default is 104)
AAL2G72640 Payload Type: 103 (between 96 and 127, default is 103)
G729E Payload Type: 102 (between 96 and 127, default is 102)
VAD: No Yes
Symmetric RTP: No Yes
http://192.168.5.160/cgibin/config_a1 2/3
4/5/2016 Grandstream Device Configuration
Fax Mode: T.38 (Auto Detect) PassThrough
Fax Tone Detection Mode: Caller Callee Caller or Callee
Jitter Buffer Type: Fixed Adaptive
Jitter Buffer Length: Low Medium High
SRTP Mode: Disabled Enabled but not forced Enabled and forced
SLIC Setting: USA
Caller ID Scheme: Bellcore/Telcordia
Caller ID TX Level (dB): 20 (40 0dB. Default 20dB)
Polarity Reversal: No Yes (reverse polarity upon call establishment and termination)
Loop Current Disconnect: No Yes (loop current disconnect upon call termination)
Loop Current Disconnect Duration: 200 (100 10000 milliseconds. Default 200 milliseconds)
Hook Flash Timing: In 402000 milliseconds range, minimum: 300 maximum: 1100
On Hook Timing: 400 (In 402000 milliseconds range, default is 400)
Gain: TX 0dB default RX 0dB default
Disable Line Echo Canceller (LEC): No Yes
Ring Tones (Syntax: c=on1/off1on2/off2on3/off3;)
Ring Tone 1: c=2000/4000;
Ring Tone 2: c=2000/4000;
Ring Tone 3: c=2000/4000;
Ring Tone 4: c=2000/4000;
Ring Tone 5: c=2000/4000;
Ring Tone 6: c=2000/4000;
Ring Tone 7: c=2000/4000;
Ring Tone 8: c=2000/4000;
Ring Tone 9: c=2000/4000;
Ring Tone 10: c=2000/4000;
Update Cancel Reboot
All Rights Reserved Grandstream Networks, Inc. 20062008
http://192.168.5.160/cgibin/config_a1 3/3
4/5/2016 Grandstream Device Configuration
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS FXS PORT FXO PORT
Account Active: No Yes
Primary SIP Server: 192.168.5.251 (e.g., sip.mycompany.com, or IP address)
Failover SIP Server: (Optional, used when primary server no response)
Prefer Primary SIP Server: No Yes ( yes will register to Primary Server if Failover registration expires)
Outbound Proxy: 192.168.5.251 (e.g., proxy.myprovider.com, or IP address, if any)
SIP Transport: UDP TCP TLS (default is UDP)
NAT Traversal (STUN): No No, but send keepalive Yes
SIP User ID: 10000 (the user part of an SIP address)
Authenticate ID: 10000 (can be identical to or different from SIP User ID)
Authenticate Password: (purposely not displayed for security protection)
Name: 10000 (optional, e.g., John Doe)
DNS Mode: A Record SRV NAPTR/SRV
Tel URI: Disabled
SIP Registration: No Yes
Unregister On Reboot: No Yes
Outgoing Call without Registration: No Yes
Register Expiration: 60 (in minutes. default 1 hour, max 45 days)
SIP Registration Failure Retry Wait 20
(in seconds. Between 13600, default is 20)
Time:
Local SIP port: 5062 (default 5062)
Local RTP port: 5012 (102465535, default 5012)
Use Random Port: No Yes
Remove OBP from Route Header: No Yes
Support SIP Instance ID: No Yes
Validate Incoming SIP Message: No Yes
Check SIP User ID for incoming
No Yes (no direct IP calling if Yes)
INVITE:
Allow Incoming SIP Messages
No Yes (no direct IP calling if Yes)
from SIP Proxy Only:
SIP T1 Timeout: 0.5 sec
SIP T2 Interval: 4 sec
DTMF Payload Type: 100
Preferred DTMF method: Priority 1: RFC2833
(in listed order) Priority 2: RFC2833
Priority 3: RFC2833
Disable DTMF Negotiation: No (default, negotiate with peer) Yes (use above DTMF order without negotiation)
ProxyRequire:
Use NAT IP: (used in SIP/SDP message if specified)
Ring Timeout: 60 (10300, default is 60 seconds)
Early Dial: No Yes (use "Yes" only if proxy supports 484 response)
Dial Plan Prefix: (this prefix string is added to each dialed number)
Use # as Dial Key: No Yes (if set to Yes, "#" will function as the "Dial" key)
Dial Plan: { x+ | *x+ }
SUBSCRIBE for MWI: No, do not send SUBSCRIBE for Message Waiting Indication
Yes, send periodical SUBSCRIBE for Message Waiting Indication
Anonymous Call Rejection: No Yes
http://192.168.5.160/cgibin/config_a2 1/3
4/5/2016 Grandstream Device Configuration
Special Feature: Standard
Session Expiration: 180 (in seconds. default 180 seconds)
MinSE: 90 (in seconds. default and minimum 90 seconds)
Caller Request Timer: No Yes (Request for timer when making outbound calls)
Callee Request Timer: No Yes (When caller supports timer but did not request one)
Force Timer: No Yes (Use timer even when remote party does not support)
UAC Specify Refresher: UAC UAS Omit (Recommended)
UAS Specify Refresher: UAC UAS (When UAC did not specify refresher tag)
Force INVITE: No Yes (Always refresh with INVITE instead of UPDATE)
INVITE RingNoAnswer Timeout 40
(5300 seconds. Default 40 seconds)
(sec):
Enable 100rel: No Yes
Use First Matching Vocoder in
200OK SDP: No
Yes
Preferred Vocoder: choice 1: PCMU
(in listed order) choice 2: PCMA
choice 3: G723
choice 4: G729
choice 5: G72632
choice 6: iLBC
choice 7: G729E
choice 8: AAL2G72616
G723 Rate: 6.3kbps encoding rate 5.3kbps encoding rate
iLBC Frame Size: 20ms 30ms
iLBC Payload Type: 97 (between 96 and 127, default is 97)
AAL2G72616 Payload Type: 100 (between 96 and 127, default is 100)
AAL2G72624 Payload Type: 99 (between 96 and 127, default is 99)
AAL2G72632 payload type: 104 (between 96 and 127, default is 104)
AAL2G72640 Payload Type: 103 (between 96 and 127, default is 103)
G729E Payload Type: 102 (between 96 and 127, default is 102)
VAD: No Yes
Symmetric RTP: No Yes
Fax Mode: T.38 (Auto Detect) PassThrough
Fax Tone Detection Mode: Caller Callee Caller or Callee
Jitter Buffer Type: Fixed Adaptive
Jitter Buffer Length: Low Medium High
SRTP Mode: Disabled Enabled but not forced Enabled and forced
Caller ID Scheme: ETSIFSK prior to ringing with RP
FSK Caller ID Minimum RX Level 13
(96 0dB. Default 40dB)
(dB):
FSK Caller ID Seizure Bits: 300 (0 800 bits. Default 70)
FSK Caller ID Mark Bits: 180 (1 800 bits. Default 40)
Caller ID Transport Type: Relay via SIP From
http://192.168.5.160/cgibin/config_a2 2/3
4/5/2016 Grandstream Device Configuration
Enable Current No Yes (Default Yes. If set to yes, enter threshold below)
Disconnect:
Current Disconnect 100
(50800 milliseconds. Default 100 milliseconds)
Threshold (ms):
Enable PSTN Disconnect
Tone Detection: No Yes (Default No)
(If set to yes, the following tone is used as the disconnect signal)
PSTN Disconnect Tone: f1=425@32,f2=425@32,c=200/200200/200200/600;
(Syntax: f1=freq@vol, f2=freq@vol, c=on1/off1on2/off2on3/off3;)
(Allowed Range: freq = 0 to 4000Hz; vol = 40 to 24dBm)
(Default: Busy Tone: f1=480@32,f2=620@32,c=500/500;)
AC Termination Model Countrybased Impedancebased (Default Countrybased )
Countrybased SPAIN
Impedancebased 600C 600 ohms + 2.16uF
Number of Rings: 1 (150. Default 4)
(Number of rings for a PSTN incoming call before FXO port answers to accept VoIP
number)
PSTN Ring Thru FXS: No Yes (Default Yes)
(If set to yes, all incoming PSTN calls will ring the FXS port after the Ring Thru Delay)
PSTN Ring Thru Delay 4
(110 seconds. Default 4 seconds)
(sec):
Channel Dialing
DTMF Digit Length (ms): 100 (40127 milliseconds, Default 100 milliseconds)
DTMF Dial Pause (ms): 100 (40127 milliseconds, Default 100 milliseconds)
First Digit Timeout (sec): 10 (120 seconds. Default 10 seconds)
InterDigit Timeout (sec): 4 (115 seconds. Default 4 seconds)
Wait for DialTone: No Yes (Default Yes dial upon dialtone)
Stage Method (1/2): 1 (Default 2 2 stage dialing)
Update Cancel Reboot
All Rights Reserved Grandstream Networks, Inc. 20062008
http://192.168.5.160/cgibin/config_a2 3/3