Escolar Documentos
Profissional Documentos
Cultura Documentos
&
INSTRUMENTATION LAB
TM
Specification:
Load cell : 1Kg capacity
Weight : 100 gms. x 10 nos.
Indicator : 3½ digit display to read upto 1 Kg.
B.S.PYROMATIC INDIA (P) LTD.,
Specification:
LDR : 10 K Ohms
Bulb : 12 V Bulb
Displacement : 30mm
Indicator : 3½ digit display to read upto 30mm with variable voltage source to the bulb.
Piezoelectric Trainer - BSPIL-IST-05010
This comprises of piezoelectric crystal mounted inside housing and fitted on a plate. Digital indicator is supplied to indicate the
impact force.
Specification:
Piezoelectric Transducer : 1000 Pf Piezo-crystal
Indicator : 3½ digit display to read impact force.
Capacitance Trainer - BSPIL-IST-05011
This comprises of parallel plate / angular capacitor with dielectric medium air sensor, mounted on the base plated with scale for
displacement. Digital indicator is provided to read the change in capacitance in terms of displacement.
Specification:
Capacitance Sensor : Parallel Plate capacitor for Linear Displacement and Angular displacement.
Displacement : 50mm / 90º
Indicator : 3½ digit display to read displacement
Level Measurement Trainer - BSPIL-IST-05012
Level Trainer is a table top module, it comprises of a measuring tank of 50 cm length, sump tank and load cell or capacitance as
level sensor. A vertical pump is fitted to circulate the water. Digital display indicator is provided to display water level in cm.
Specification:
Level Sensor : Load cell / capacitance
Max. Level : 50 cm
Pump : FHP vertical pump
Digital indicator : 3½ digit LED display to read levels in cms.
rotameter is provided to measure the exact flow rate. Digital timer is provided to note down the duration of flow.
Specification:
Tank capacity : Max. 5 Liters
Rotameter : 6 to 100 LPM
Orifice Meter : Small orifice plate with ¼ BSP tube fitted with U-Tube manometer.
Flow Rate : 6 to 100 LPM
Pump : FHP vertical pump
Timer : 0 to 30 minutes digital timer
Difference pressure sensor in U-type manometer with digital flow indicator at extra cost can be supplied
gauge to build pressure upto 5 Kg / cm² to conduct the experiment. Digital readout is provided to indicate the parameter.
column stand which will enable the student to study the flow rate of given liquid and the quantity of the liquid pumped in the top tank and
reduction of quantity from the bottom tank and see the actual flow through the Rotometer and compare the quantity of the flow in the top tank
which is graduated and check the timing with the digital timer and the timer also facilitate auto shut-off of motor which will avoid air block to
conduct the subsequent tests also a valve is provided to drain the pumped water to bring back to the bottom tank through gravity force which will
enable the student to have the second test cycle and so on.
Only Rotometer - BSPIL-IST-05031
A. Range : 20 to 200 cc/Min B. Range : 50 to 500 cc/Min C. Range : 0.1 to 1 LPM
Float : PVC Conical Float : 304 SS PVC Conical Float : 304 SS PVC Conical
Scale Length : 85mm. Approx Scale Length : 85mm approx Scale Length : 85mm approx.
a. Source:
This consists of a variable speed attachments and a motor. The maximum speed will be 3000 rpm apporx.
b. Sensors:
Non-contact magnetic type
Non-contact photo reflective pickup
Both the sensors can be used to be connected to a digital speed indicator (Tachometer)
Loading source
This consists of hydraulic system, stand and platform for keeping the load measuring units. The loading can be released
with a screw.
Capacity : 1 kgf
maximum over load : 50% of the rated capacity
Type : 'S' type compression
Range : 100 Kg
Dial gauge : 0.10mm
Accuracy : 0.01mm
We do manufacture and deal other mechanical labs such as : Imaging, Metallurgy, Metrology, Dynamics, Heat
Transfer, Thermal, Biotechnology, Refrigeration & Air Condition, Fluid Mechanics, Foundry, Non Destructive Testing,
Strength Of Materials, Workshop.
Above Specifications are indicative and may have variations as per Current R&D Marketed by:
TM B.S.PYROMATIC INDIA (P) LTD.,
P.B.No.6033,27/1,XII Avenue,
Ashok Nagar,Chennai-600 083.INDIA. AN ISO 9001-2000 COMPANY
Phone : 091-44-24890009 / 24890710. Fax: 091-44-24897880
E-Mail: pyromat@satyam.net.in. Websites : www.bspyromatic.com.