Escolar Documentos
Profissional Documentos
Cultura Documentos
Sizes 3 – 100
ACO Aeropur Plus
The ACO Aeropur Plus sewage treatment plants • Mechanical pre-treatment • Easy installation as a compact and light-
are designed for the complete biological purifi- • Biological treatment by activated sludge weight unit
cation of domestic wastewater originating • Final gravity sedimentation • Very stable and high treatment efficiency
from: during irregular hydraulic and mass load –
• single-houses overload resistant
• residential areas • Effective purification also of total nitrates
• hotels (Ntot)
• boarding-houses • Low maintenance
• companies, etc. • Low energy consumption
Blower
Air
Sludge water
Inlet
Outlet
1
2 4
5
3
Key:
1. Primary treatment – aerated screen basket
2. Buffer tank
3. Activation
4. Final sedimentation
5. Suplus sludge storage tank
ACO Aeropur Plus
Technology description
The ACO Aeropur Plus technological line con- Biological part of the ACO Aeropur Plus con- Surplus sludge is stored separately in the sto-
sists of mechanical and biological parts. sists of the activation tank (3) and the built-in rage tank (5) which is capable of holding it for
final sedimentation tank (4). 100 – 150 days. Thanks to the separate stora-
Mechanical part of the ACO Aeropur Plus is ge tank surplus sludge does not affect purifica-
composed of the aerated screen basket (1) Activation tank is aerated intermittently by tion efficiency of the ACO Aeropur Plus in any
being submerged into the buffer tank (2). micro-bubble aeration. Intermittent operation way.
provides electric power saving up to 50 per-
Sludge water is supplied into the ACO Aeropur cent, and simultaneously even better purifica- Pumping of sludge water, return sludge and
Plus through the inlet pipe whereby it flows into tion efficiency. In the mode of aeration (nitrifica- surplus sludge is carried out with the aid of air-
a screen basket. Coarse-grained matters are tion) there occur degradation of organic pollu- lift pumps in the ACO Aeropur Plus. These
entrapped into the screen basket and pre-trea- tion and ammonia. In the mode of aeration pumps need no maintenance and they are ent-
ted water passes freely through the basket break (denitrification) there is a reduction of irely resistant to clogging. Hydraulic capacity
screening meshes into the buffer tank space. value of nitrogen total volume. of the pumps is continuously adjustable even
Screen basket is aerated intensively from with a very small flow of rate, which helps to
below. Air flowing through the screen basket From the activation tank the water flows into ensure uniform process of purification and thus
grinds/crushes a part of coarse-grained impuri- the final sedimentation tank. Then gravitational stable purification efficiency.
ties (left-overs, paper, etc.) which leaves the separation of treated water from activated slud-
screen basket in the form of small particles ge is realized there. Treated water flows off the As the only electric appliance of the ACO
together with pre-treated water. This “self-clea- sewage treatment plant through an outlet unit. Aeropur Plus there is a blower supplying air
ning effect” of the screen basket extends con- Activated sludge falls down to the bottom of into aeration elements in the activation tank
siderably time period of its filling and even the final sedimentation tank from where it is and into air-lift pumps. Blower operation is
intervals of its emptying by the operating staff. pumped and then returns sludge back to the time-controlled. Blower intermittent operation
activation tank and partly into the storage tank guarantees electric power savings up to 50
Hydraulic peaks at the inlet of the ACO Aeropur (5) as surplus sludge. percent.
Plus sewage treatment plants are eliminated
with the aid of the buffer tank from where pre- Final sedimentation tank is equipped with a
treated water is pumped uniformly into the device for automatic collection and removal of
plant biological part. Hydraulic peak equalizing floating sludge from water level. This device
supports stable purification efficiency consider- supports markedly reduction of maintenance
ably. works during operation.
Outlet Unit 3
Blower
Automatic Removing
Ventilation
of Sludge from
Water Surface
Inlet
Final Sedimentation
Buffer Tank
Activation Tank
Aerated
Screen Basket
Microbubble aeration
Air-lift Pump
Surplus Sludge
Storage Tank
ACO Aeropur Plus
Range of usage
Number of PE 2–5 3–8 8 – 16 16 – 28 28 – 42 42 – 60 60 – 85 85 – 120
Hydraulic load [m3/day] 0.30 – 0.75 0.45 – 1.20 1.2 – 2.4 2.4 – 4.2 4.2 – 6.3 6.3 – 9.0 9.0 – 12.8 12.8 – 18.0
Biological load BOD5 [kg/day] 0.12 – 0.30 0.18 – 0.48 0.48 – 0.96 0.96 – 1.68 1.68 – 2.52 2.52 – 3.60 3.60 – 5.10 5.10 – 7.20
H2
H1
H2
1 3
1 3
H
H
H3
H3
4 2
4 2
LxW
D
4
Inlet Outlet
Inlet 4 2 Outlet
DN150 DN150
DN150 DN150
(Ø160) 1 3 (Ø160)
(Ø160) 1 3 (Ø160)
4 2
Ventilation Ventilation
DN100 DN100
(Ø110) (Ø110)
Key:
1. Buffer tank
2. Activation tank
3. Final sedimentation tank
4. Surplus sludge storage tank
ACO Aeropur Plus
Technical data
Efficiency of purification
5
ACO Aeropur Plus
Main tanks of the ACO Aeropur Plus are stati- To make utilization of the above mentioned If some adapters are used there, the sewage
cally designed for in ground installation without option possible without any expensive con- treatment plant cover remains the same as
concrete encasement up to inlet pipeline depth struction work, the ACO Aeropur Plus main though it were used for the main tank only.
of 1.35 m. This option offers greater flexibility tanks are provided with adapters which means
during installation of the ACO Aeropur Plus and it is possible to heighten the main tank of the
better adaptation to local conditions (installa- ACO Aeropur Plus quick and easily.
tion of inlet and outlet pipeline in ice-free depth,
guarantee sufficient slope of the inlet and out-
let pipeline, etc.).
A B A+B
ACO Aeropur Plus
7
Subject to technical changes without notice
© ACO Industries k.s. All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made without guar-
antee since the conditions of use are beyond the control of the Company. It is the customer’s responsibility to ensure that each product is fit for its intended purpose and that the actual condi-
tions of use are suitable. This brochure and any advice is provided ACO Industries k.s. (the company) free of charge and accordingly on terms that no liability (including liability for negligence) will
attach the Companyor its servants or agents arising out of or in connection with or in relation to this brochure or any such advice. Any goods supplied by the Company will be supplied solely upon
its standard conditions of sale, copies of which are available on request. The Company’s policy of continuous product development and improvement renders specifications liable to modification.
information provided in this brochure is therefore subject to change without prior notification.