Escolar Documentos
Profissional Documentos
Cultura Documentos
FEATURES:
•CURRENT TIME (HR., MIN., & Pressing the START button will reset
SEC.) the seconds digits to 0. If seconds
are 30 or greater, one will be added
•DAY/DATE/MONTH/YEAR to the minutes digits.
At any time, while in TIME 1 mode,
•INDICATES PRESENT TIME, TIDE To set hours digits, press MODE Press MODE button; if you have press START button; current tide
HEIGHT AND DIRECTION button; hours digits will flash. To selected the Caribbean, Mexico, conditions will appear on the top
advance hours digits, press START West USA, or East USA, then DST half of the display.
•MOVEABLE CURSOR INDICATES button; to retard hours digits press ON or DST OFF will appear on the
HOURLY TIDE AND DIRECTION STOP/RESET button; hold for display. DST is an abbreviation for
FOR PRESENT DAY rapid advnce. daylight savings time. Note: All of HOW TO SET AND OPERATE
the western and eastern coastal CURRENT TIDE
•FUTURE TIDE MODE INDICATES states in USA observe DST,
TIDE HEIGHT AND DIRECTION however, neither Hawaii nor Japan Press MODE button until “TIDE”
FOR 15 YEARS observe Daylight Savings Time. appears. Current date will be
Note: The DST feature only needs displayed on the lower half, current
•CHOOSE FROM FIFTEEN PRE- to be activated once by pressing daily tide will be displayed on the
PROGRAMMED ZONES. START button; it will adjust upper half.
automatically thereafter. However,
•CHOOSE FROM 128 PRE- you will still need to adjust the time
PROGRAMMED BEACHES of day at daylight savings time
WITHIN THE FIFTEEN ZONES changes. The DST flag will appear
on the display when the DST feature
•PROGRAM YOUR LOCAL BEACH is in the “ON” position.
BREAK IF NOT INCLUDED To set minutes digits, press MODE
AMONG THE 128 PRE- button; minutes digits will flash. To Press MODE button; “USER OPT”
PROGRAMMED BEACHES advance minutes digits, press will appear on the display. If your
START button; to retard minutes favorite location or beach break is
•MULTIPLE COUNTDOWN TIMERS digits, press STOP/RESET button; not one of the pre-programmed
hold for rapid advnce. locations, you may wish to add it.
•CHRONOGRAPH WITH SPLIT To do this, you will need to know
TIMES the time difference between the high Press START button; and cursor will
tide at your favorite beach and the scroll across tide graph, indicating
•FOUR DAILY OR ONE TIME high tide (for the same day) at high, low, rising and falling tide
ALARMS AND HOURLY CHIME conditions for any hour of the current
day.
•DUAL TIME AND OPTIONAL 24- the closest pre-programmed beach.
HR. TIME This time difference information is You may also set tide zone, location,
usually illustrated on tide calendars DST, or user option from this mode
•WATER-RESISTANT TO 300 FEET or local tide charts, and is indicated by pressing and holding LIGHT/SET
for example as (+ or -) 10, 20 or 30 button for two seconds. Then follow
•NIGHT VISION™ ELECTRO- minutes between two beach the sequence as outlined in “HOW
LUMINESCENT BACKLIGHTING locations. For example, suppose TO SET TIME 1, DATE, 24-HOUR
Continuing through the time and your favorite beach break is Malibu, FORMAT, AND BEACH
date setting mode, the setting which is not pre-programmed in the LOCATION.”
sequence is seconds, hours, watch, and your local tide calendar
minutes, year, month, date, and indicates that Malibu tides are (+10)
12/24- hour mode. minutes, compared to Los Angeles
KEY REFERENCES tides. After entering Malibu as your
favorite beach, you would enter
(+10) as your offset.
________
Total $
__________________________________
Account# Expiration Date
__________________________________
Printed Name
__________________________________
Address
__________________________________
__________________________________
__________________________________
Phone Number
__________________________________
Signature
816004-1-4