Você está na página 1de 56

SKM Compact Screw Chillers

APCY-H Series - R-134a


R-134a

APCY-H Series
Screw Chillers

Range 76 TR to 519 TR
(267 kW to 1825 kW)

www.skmaircon.com
facebook.com/skmaircon @skmaircon
Sharjah Economic Excellence
Award winner
1
SKM Compact Screw Chillers
APCY-H Series - R-134a

Contents
Introduction ...........................................2 Selection Procedure .................................27
Legend.................................................. 2 Electrical Data ...........................................28 Introduction
Nomenclature ...................................... 2 Typical Wiring Diagram .............................33
General Features ................................3 Power Entry Connection ..........................34
SKM APCY-H Series environment friendly
Main Component Features ...................3 Dimensional Data......................................35
(R-134a) Air Cooled Screw Chillers are
Microprocessor Control .......................4 Center Of Gravity....................................43
designed and manufactured to provide utmost
Optional Features ................................6 Loading Points..........................................44
performance, efficiency, reliability, to meet the
General Data ....................................8 Sound Data................................................46
requirements and long life from Gulf’s severe
Capacity Ratings ................................12 Location And Space Requirements .......48
climatic condition.
Capacity Correction &Limits ..............25 Water Piping Practices ..............................49
Water Pressure Drop ...........................26 Guide Specifications .................................53
APCY-H Series Chillers have low noise
and minimum vibration ideal for vast range
of applications including hotels, high-rise
Legend buildings, stores, hospitals, and modern
cooling applications of modern manufacturing
The following legends are used throughout this manual: industries.

cfm...........Cubic feet per minute l/s.............Liters per second


EER.........Energy Efficiency Ratio MBH.........Btu/hr x 1000 APCY-H units are factory assembled, leak
Hz............Hertz Ph............Phase tested, evacuated, internally wired and fully
kW...........Kilowatts PI.............Power Input of Compressor charged with refrigerant R-134a. Every unit
kg.............Kilogram TR............Tons of Refrigeration
lbs............Pounds V..............Volts is fully tested before delivery and is ready for
installation.

APCY-H Chillers are designed and


manufactured as per SKM Quality,
Environment, Occupational, Health and
Nomenclature
Safety Management Systems that confirms
APC Y 5 115 S H Y with ISO 9001:2008, ISO 14001:2004 and
OHSAS 18001:2007.
Air Cooled Power Supply Code
Packaged Chillers
Y: 380V/3Ph/50Hz APCY-H Chillers are rated on accordance
Y1: 415V/3Ph/50Hz with AHRI 550/590.
Y-version P: 440V/3Ph/50Hz
Screw Compressor, R-134a R : 380-400V/3Ph/60Hz
Power Supply 5 : 50 Hz E : 460V/3Ph/60Hz SKM provides qualified service and stock
Frequency 6 : 60 Hz T: 220V/3Ph/60Hz of replacement parts in all major cities of the
(Consult SKM) G.C.C. countries, Egypt, Jordan, and Pakistan.
Size See back cover for details or call SKM.
H : High Efficiency
No. of Refrigeration circuits
S – Single
D – Double
T – Triple
SKM Air Conditioning LLC

SKM reserves the right to change, in part or in


whole the specifications of its Air Conditioning
Equipment at any time in order to add the latest
technology. Therefore, the enclosed information
may change without any prior notice.
You name it.....We cool it
2
SKM Compact Screw Chillers
APCY-H Series - R-134a
General Features Condensers
Condenser coils are manufactured from seamless Hi-x copper
High COP tubes mechanically bonded to aluminium fins to ensure optimum
heat transfer. All coils are tested against leakage by air pressure
APCY-H Series chillers provide tremendous savings in operating of 450 psig (3102 kPa) under water. All standard coils are 3
costs by using high efficiency, semi hermetic screw compressor. rows ,16 FPI (1.59 mm fin spacing) ,3/8” (9.5mm) O.D. tubes.
High COP is made possible due to perfect screw profile and
precise machining. The stepless capacity control provides precise Condenser fin materials should be matched with site conditions
capacity as required by the system load, and thus giving higher to inhibit coil corrosion and ensure extended equipment life.
part load efficiencies. The compressor can be loaded from
25 or 35 to 100% of capacity depending upon the requirement For different application requirements, other optional condenser
through state of the art microprocessor control which precisely fin materials are available:
monitors the water temperature and accurately modulates the
compressor accordingly. • Copper fins .
• Copper fins electro-tinned after manufacturing .
• Precoated Aluminum fins.
Maintenance Free Operation The pre-coated is hydrophobic polyurethane resin. This option
provides substantial corrosion protection beyond standard
APCY-H Series chillers have compact design and are supplied as coil construction.
a complete package, ready to be wired and piped for operation. • Aeris Guard Coil Coating.
Screw compressors in SKM APCY-H Series provide virtually The Aeris Guard Coil is a self etching high performance
maintenance free operation as there are fewer moving parts. modified epoxy finish that is specifically designed to coat
Special bearings facilitate longer run periods of compressor and protect Aluminum and Copper surfaces. In addition, the
without any need for maintenance. coating is ideal for the protection of ferrous and non ferrous
materials.

Wide Operating Range


Low Noise Condenser Fans
APCY-H chillers are designed, as standard, to operate at a wide
range of ambient temperatures from 25oF (-4oC) to 125.6oF (52oC). The condenser fans are propeller type, aluminium alloy blades,
directly driven by electric motors. Motors are Totally Enclosed
Air Over (TEAO) six pole with class ‘F’ insulation and IP55
protection. The TEAO and class ‘F’ insulation features ensure
Main Component Features long life and are unique to SKM.

The motors are factory wired to chiller unit control panel where
Compressors the motor starters are located to control the operation of these
motors. The fans are individually statically and dynamically
APCY-H Series Chillers use high performance and high efficiency balanced at the factory. Complete fan assembly is provided with
screw compressors which are with 5:6 ratio screw rotor profile suitable acrylic coated fan guard.
designed specifically for modern refrigerant characteristics,
double-walled rotor housing, robust in construction and have
a very few moving parts to minimize noise and ensure rigidity. Evaporator
Screw Compressors are directly flanged on a three stage oil
separator with low oil carry over and pressure drop demister to APCY-H evaporators are direct expansion, shell and tube,
ensure minimal refrigerant dilution in the oil and maintain high with removable head, and having 1, 2 or 3 refrigerant circuits.
oil viscosity. Oil sight glass, oil drain valve, oil heater, discharge Evaporator shell is made of steel. Tubes of copper fixed to steel
check valve, discharge stop valve are available as standard. end plates. Baffles are provided in the water flow to increase
heat transfer efficiency. Evaporators are provided with drain
Continuous (Stepless) capacity control system and automatic and vent plugs. Cooler shell is insulated with 1.0” (25mm)
start unloading are provided as standard. thick flexible closed cell insulation, K factor 0.28 Btu. in/ft².h.oF
All compressors are provided with motor winding temperature (0.04W/m.oK). Maximum working pressure of waterside is 145
protection, discharge temperature protection, phase reversal psig (1000 kPa) and refrigerant side is 239.3 psig (1650 kPa).
protection, phase failure protection and oil level protection.

3
SKM Compact Screw Chillers
APCY-H Series - R-134a
Electronic Expansion Valve
APCY-H series chillers use electronic expansion valve for • Compressors are with part winding start or star-delta start
precise control refrigerant mass flow. Our electronic expansion depending on models.
valve improves EER (Energy Efficiency Ratio) at full & part-load
• Individual compressor and condenser fan motor contactors.
conditions. Also it improves temperature control & increases the
range of operating conditions. • Thermal magnetic circuit breakers for compressors and
condenser fan motors.
• Voltage monitoring module for protection against under
Casing/Structure Frame voltage, over voltage, phase loss, phase reversal and phase
unbalance of the incoming voltage.
The unit casing in APCY-H series chillers is made of zinc
• Circuit breaker for control circuit.
coated galvanized steel sheets conforming to JIS-G 3302
and ASTM A 653 which is phosphatized and baked after an • Remote/Off/Local selector switch.
electrostatic powder coat of approximately 60 microns. This finish • Microprocessor master board with graphical display.
and coating can pass a 1000 hour in 5% salt spray testing at
95°F (35°C) and 95% RH as per ASTM B117. • Microprocessor expansion boards as required.
• Electronic expansion valve control boards.
APCY-H chillers are assembled on rigid structural steel skid • Control Relays.
channels painted with one coat galvanized primer and one coat
black enamel. The package is assembled for easy handling • Control circuit on/off switch and pump down switches.
during transportation and robust support during installation • Volt free contacts for run, common fault and auto mode
and operation. indications.
• Provision for accepting volt free contact for remote start/
stop.
Refrigerant Piping
• Control terminal blocks and power terminal blocks/bus bars.
The refrigeration circuit piping is fabricated from ACR grade
copper piping. Each refrigeration circuit includes filter drier,
electronic expansion valve, and shut off valve. The refrigeration
circuit suction line is insulated with ½” (13mm) wall thickness Microprocessor Controller
closed cell pipe insulation.

Economizer
All units are equipped with economiser circuit. Economiser
operation improves both cooling capacity and efficiency by
increasing sub cooling where part of the liquid refrigerant is
flashed to an intermediate pressure which is used to cool the
remaining liquid refrigerant. This flash refrigerant is then fed into
a compressor where it helps to cool the vapour from the main
circuit. The economiser channel is integrated into the control
slide to enable sub cooling circuit to operate regardless of the
compressor load condition. The components of an economiser
cycle include thermostatic expansion valve, plate type heat
exchanger, solenoid valve & ECO muffler kit.
Microprocessor control system is available for APCY-H series
chiller as a standard feature. Our high energy efficient chiller has
Control Panel a full function microprocessor control unit designed to keep the
chiller running at its most energy efficient level. It is a rugged
The unit mounted chiller control panel enclosure is fabricated microprocessor based controller that is designed for the hostile
out of heavy gauge sheet steel in phosphatized powder coated environment of HVAC industry.
baked finish. The enclosure conforms to IP54 as per guidelines
in IEC 529. A hinged access door and key-fastener is provided It provides flexibility with set points and control options that can
for easy access and security. The panel is factory wired in be selected prior to commissioning a system or when the unit is
accordance with NEC 430 & 440, labeled, tagged and features live and functioning. Displays, alarms and other interfaces are
220V / 240V controls. accomplished in a clear and simple language that informs the
user as to the status of the system. It is designed to safeguard
the system that is being controlled, eliminate the need for
manual intervention and to provide a simple but meaningful
man-machine-interface.

4
SKM Compact Screw Chillers
APCY-H Series - R-134a
This controller provides complete operational control for the • Service tools.
chiller and has built-in auto diagnostic capability that can signal • Lockout Reset.
normal operation or alarm conditions as well as shutting down
the chiller or system, if necessary. • Lockout Alarm.
• Password.

The Main Features of the controller are as follows: System Control Philosophy

The unit may be enabled or disabled manually or through the


• A large graphical LCD Display (2.8˝ diagonal) with back-lit
use of an external signal from a building automation system.
that can be seen in bright or dim lighting.
• A nine button generic keypad that is so user friendly, it Control is based upon leaving chilled water temperature. How fast
rarely requires a reference manual. the temperature changes is calculated and capacity decisions
• Battery backed up built in real time clock to program the are based upon the rate, the current temperature, and the control
chiller for 2 starts and 2 stops daily to provide the information temperature zone.
about the running hours of the compressors.
Capacity is never added if the system is moving toward the
• Multiple authorization levels to provide tight security of the temperature target at an acceptable rate. The unit will monitor
control system. all control functions and stage the compressor to maintain the
• Two operating schedules per each day of the week and 8 required operating capacity.
holidays.
• The system provides ‘last time’ enabled & disabled, number
of cycles, and total run hours.
Easy Accessible Measurements Include:
• Automatic Lead/Lag changeover of the compressors.
• Pump-down at the beginning and end of every circuit cycle.
• Capacity control based on leaving chilled water temperature.
A special control zone based on leaving water temperature • Status of the chiller.
that reduces compressor cycling, and improved unit part • Status of each circuit/compressor.
load efficiency.
• Status of condenser fans.
• Start/stop facility from remote through Volt Free Contact
• Leaving and Entering chilled water temperature.
(VFC) .
• Suction pressure and temperature for each refrigerant
• Common Run, Fault and remote mode operation status volt circuit.
free contacts provided for remote signaling.
• Discharge pressure and temperature for each refrigerant
circuit.
Display Information • Suction and discharge superheat for each refrigerant circuit.
• Oil pressure for each compressor.
SKM APCY-H chillers offer a graphics LCD display which allows • Winding temperature for each compressor.
the operator to access different parameters of the chiller. Operator • Ampere draw for each compressor.
can view and change the set point of chiller parameters. The • Expansion valve opening percentage.
graphical display has lot of features, trending is one of the key
• Ambient temperature.
features of graphical display, which shows last 25 samples with
an appropriate scale to allow it to fit on the display. • All active set points.
• Run time for each compressor.
The well designed keypad with three function keys, four direction • Number of compressor starts.
keys and two selection keys allows the operator to navigate
through different Menu, such as: • Lockout and alarm status.
• Status of water flow switch, voltage monitor, compressor
• Status. internal motor protector, oil level switch, run/stop input and
pump down switches.
• Outputs.
• Log of last 100 alarms.
• Inputs.
• Lead compressor identification.
• Alarms.
• Date and time.
• Graphs.
• Graphs of all inputs and outputs.
• Setpoint.

5
SKM Compact Screw Chillers
APCY-H Series - R-134a
System Protection Hard wired signals
The following system protection controls will automatically act Volt free contacts for Run, Common fault and Auto mode
to insure system reliability and protection of the unit. indications and provision for remote start/stop are provided as
standard feature. In addition to these, below options can be
• Low suction pressure protection. provided if specified.
• High discharge pressure protection.
• High discharge temperature protection. • Emergency Stop – A volt free contact from BMS to chiller,
• Low discharge pressure protection. which is normally closed and opens on an emergency shut
down condition. It will make the chiller to shut down immed
• Low oil pressure protection. -iately bypassing normal shut down procedure.
• Low oil level protection.
• High compressor motor winding temperature protection. • Chilled water reset – A 0-5VDC signal from BMS to chiller,
which allows resetting chilled water set point around an
• Low superheat protection.
acceptable range.
• High compressor ampere protection.
• Compressor internal thermal protection.
• Freeze protection.
BMS protocols
• Under voltage, over voltage, phase loss, phase reversal
and phase unbalance protection.
The chiller controller is capable to interface with four major building
• Chilled water flow loss protection. management systems, which are BACnet, Modbus, Lonworks and
• Sensor error protection. Johnson N2, by adding optional hardware. This interface allows to
• Pump down. monitor the status of chiller and individual circuits, all inputs and
outputs, chilled water set point etc. The required BMS protocol
• Anti-recycle. and number of chillers needs to be specified during the time of
• Time delay between stages. order as costing of the BMS interface involves these parameters.
• 4-Levels of passwords to restrict the intentional mishandling.

Optional Features available for the Micro Factory Installed Options


Controller
Alternative Condenser Material
PC Support Software Made of copper tubes and alternative fin material and/or
protective coats.
PC software to communicate with APCY-H microprocessor is
available as an optional feature. Software is named MCS-Connect
• Condenser coil with Pre Coated Aluminum fins, specify (FAP).
and it can provide both local and remote communications to the
chiller microprocessor. This program allows viewing the entire • Condenser coil with A eris Coated Aluminum fins,specify (FAA).
status of chiller, inputs, outputs, set points, alarms, graphs etc. • Condenser coil with Copper fins, specify (FC).
• Condenser coil with Aeris Coated copper fins, specify (FCA).
If there is more than one chiller, these chillers can be connected
together via Rs-485 network which can support up to 20 chillers. • Electrotinned copper fins for Condenser coil, specify (CFT).
Access to this network can be local, via RS 232 or Ethernet ( consult SKM )
connection, or remote via 14.4K Baud modem. Each chiller in the
network must be assigned to a unique address. This address can
be changed from the LCD/keypad of the unit or through MCS-
Connect software. RS 232 transmission should not exceed 50 Galvanized Frame (GFB)
feet in length and RS 485 transmission should not exceed 1 mile Hot dip galvanized steel frame and base.
without repeater. For Ethernet communication, it is necessary to
use a crossover cable when connected directly to a PC. Evaporator Casing (ECA/ECG/ECS)
Evaporator enclosed in a casing of Aluminium /Galvanized Steel
This software can run with Windows 2000 or newer version.
/ Stainless Steel, and injected with polyurethane foam. 1.5”
(38mm) insulation thickness.
BMS Communication
Condenser Coil Guard (CGP)
BMS communication with the chiller microprocessor is possible
Galvanized wire mesh guard with painted finish for condenser
through hardwired signals or major BMS protocols.
coils. Recommended on ground level installations where coil
needs to be protected against vandalism.

6
SKM Compact Screw Chillers
APCY-H Series - R-134a
Extra Low Noise Fan & Motor (LNF) Evaporator Freeze Up Protection (EFP)
Low noise Fan & Motor assembly can be provided for Heating cable with thermostat to prevent evaporator
applications where minimal unit sound is required. (consult SKM) freeze-up where low ambient temperatures below 32oF (0oC)
are anticipated with/out chiller operation.
Pressure Relief Valve (PRV)
To protect the chiller from hi-pressure in the event of failure of IP55 Control Panel Enclosure (ICP)
primary high pressure safety mechanisims. Control Panel for special applications to meet IP55 requirements.

Marine Paint (MP) Main Isolator (ISO)


Marine Painting on casing and steel structure, to improve corrosion For main power isolation. (consult SKM)

resistance in coastal environments and off-shore locations.


Star/Delta Starter For Compressors (SDS)
Compressor Sound Enclosure (CSE) For models with part winding start to reduce starting current of
compressors by reduced voltage starting method. Compressors
compressor sound enclosure with insulated panels is mounted will be started in star and after few seconds it will be changed
around the compressor, to reduce sound. over to delta. ( Consult SKM).

ASME Stamped Evaporator (STE) Soft Starter (SFS)


Shell and Tube evaporator with ASME stamp. To reduce the starting current of compressors using reduced
voltage starting method. Compressors will be started using
Pressure Guages (Suction / Discharge) (SDG1) electronic solid state soft starters that will ramp up the speed
Suction & discharge pressure indication of each refrigerant circuit. of the compressors to rated speed within few seconds thus
Gauges are mounted outside the Control Panel. reducing the mechanical & electrical stresses .

Extra Shut Off Valve (XFV) Voltmeter & Selector Switch (VSS)
Extra Shut off valve in liquid line to fully isolate the filter drier. For incoming line voltage.

Suction Shut off Valve (SSOV) Microchannel Condenser Coils (MCHE)


Screw compressors are with suction shut off valves to isolate the Optional Micro Channel Condenser coil for improved galvanic
compressor from the evaporator, this may be beneficial when corrosion resistant due to single material and reduced unit weight
servicing the chiller. & refrigerant charge. (consult SKM)

Ammeter & Phase Selector Switch (AMPC)


To indicate running AMPS of each compressor.

Ammeter & Phase Selector switch (AMPI) Options for Field Installation
To indicate running AMPS on main incomer of a chiller.

Chilled Water Flow Switch (CWFS)


BMS Interface thru protocol (BMSP) To control the chilled water flow.
For interacting the units with major BMS protocols such as BACNet,
Modbus or LON. Extra hardware may be required depending on
Anti-vibration mounts, spring type (CAVM)
the protocol.
Recommended for roof mounted units or other locations in
the vicinity of occupied spaces, where noise/vibration may be
Condenser Fan Motors with built-in Anti-
objectionable. Can be supplied loose for site installation.
Condensation Heaters. (CFMA)
Where application so requires.
Hi-Lo Pressure Gauges-Loose (CSDG1)
Without piping or isolating pet cocks.
Voltage Monitoring Module as per DEWA (DVM)
Under voltage relay as per DEWA specification.This option is
available for Dubai,UAE only.

7
SKM Compact Screw Chillers
APCY-H Series - R-134a
GENERAL
Model DATA - APCY
50 Hz5075 SH 5085 SH 5095 SH 5115 SH 5135 SH 5150 SH 5155 DH 5165 DH
Compressor - Semi Hermetic, Screw
Qty Model APCY# 50751 SH 50851 SH 50951 SH 51151 SH 51351 SH 51501 SH 51552 DH 51652 DH
Oil Charge(CPI Solest 220) US Gal 4.2 / - / - 4.5 / - / - 5/-/- 6.1 / - / - 6.9 / - / - 7.4 / - / - 4.2 / 4.2 / - 4.2 / 4.5 / -
Compressor - Semi Hermetic, Screw
Ckt (A / B / C ) Litre 16 / - / - 17 / - / - 19 / - / - 23 / - / - 26 / - / - 28 / - / - 16 / 16 / - 16 / 17 / -
Qty # 1 1 1 1 1 1 2 2
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Oil Charge(CPI Solest 220) US Gal 4.2 / - / - 4.5 / - / - 5/-/- 6.1 / - / - 6.9 / - / - 7.4 / - / - 4.2 / 4.2 / - 4.2 / 4.5 / -
ft 162.5 162.5 195.0 195.0 260.0 260.0 325.0 325.0
Ckt (AArea
Face / B /(Total)
C) Litre 16 / - / - 17 / - / - 19 / - / - 23 / - / - 26 / - / - 28 / - / - 16 / 16 / - 16 / 17 / -
m 15.10 15.10 18.12 18.12 24.15 24.15 30.19 30.19
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Condenser Fan - Propeller Direct Drive
ft 162.5 162.5 195.0 195.0 260.0 260.0 325.0 325.0
Face Area (Total)
Quantity # 5 5 6 6 8 8 10 10
m 15.10 15.10 18.12 18.12 24.15 24.15 30.19 30.19
cfm 58,800 58,800 70,560 70,560 94,080 94,080 117,600 117,600
Condenser Fan
Air Flow Rate - Propeller Direct Drive
l/s 27,751 27,751 33,301 33,301 44,401 44,401 55,501 55,501
Quantity # 5 5 6 6 8 8 10 10
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
cfm 58,800 58,800 70,560 70,560 94,080 94,080 117,600 117,600
Air
SizeFlow Rate
x Quantity kW x # 1.5 x 5 1.5 x 5 1.5 x 6 1.5 x 6 1.5 x 8 1.5 x 8 1.5 x 10 1.5 x 10
l/s 27,751 27,751 33,301 33,301 44,401 44,401 55,501 55,501
Evaporator - Direct Expansion Shell and Tube
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
Quantity # 1 1 1 1 1 1 1 1
Size x Quantity kW x # 1.5 x 5 1.5 x 5 1.5 x 6 1.5 x 6 1.5 x 8 1.5 x 8 1.5 x 10 1.5 x 10
Refrigerant Circuits # 1 1 1 1 1 1 2 2
Evaporator - Direct Expansion Shell and Tube
US Gal 22.1 22.1 22.1 36.4 36.4 36.4 63.4 63.4
Quantity
Water Volume # 1 1 1 1 1 1 1 1
Litre 83.7 83.7 83.7 137.8 137.8 137.8 240.0 240.0
Refrigerant Circuits # 1 1 1 1 1 1 2 2
lbs 213.2 213.2 249.6 267.9 339.4 340.4 429.7 429.7
Refrigerant Charge (R134a) US Gal 22.1 22.1 22.1 36.4 36.4 36.4 63.4 63.4
Water Volume kg 96.7 96.7 113.2 121.5 153.9 154.4 194.9 194.9
Litre 83.7 83.7 83.7 137.8 137.8 137.8 240.0 240.0
lbs 213.2 213.2 249.6 267.9 339.4 340.4 429.7 429.7
Refrigerant Charge (R134a)
kg 96.7 96.7 113.2 121.5 153.9 154.4 194.9 194.9

Model APCY 5295 TH 5300 DH 5310 TH 5325 DH 5325 TH 5345 DH 5345 TH 5365 TH
Compressor - Semi Hermetic, Screw
Qty Model APCY# 52953 TH 2
5300 DH 3
5310 TH 53252 DH 53253 TH 53452 DH 53453 TH 53653 TH
Oil Charge(CPI Solest 220) US Gal 5/5/5 7.4 / 7.4 / - 5 / 5 / 6.1 7.4 / 7.7 / - 5 / 6.1 / 6.1 7.7 / 7.7 / - 6.1 / 6.1 / 6.1 6.1 / 6.1 / 6.9
Compressor - Semi Hermetic, Screw
Ckt (A / B / C ) Litre 19 / 19 / 19 28 / 28 / - 19 / 19 / 23 28 / 29 / - 19 / 23 / 23 29 / 29 / - 23 / 23 / 23 23 / 23 / 26
Qty # 3 2 3 2 3 2 3 3
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Oil Charge(CPI Solest 220) US Gal 5/5/5 7.4 / 7.4 / - 5 / 5 / 6.1 7.4 / 7.7 / - 5 / 6.1 / 6.1 7.7 / 7.7 / - 6.1 / 6.1 / 6.1 6.1 / 6.1 / 6.9
ft 520.0 520.0 585.0 585.0 585.0 585.0 585.0 650.0
Ckt (AArea
Face / B /(Total)
C) Litre 19 / 19 / 19 28 / 28 / - 19 / 19 / 23 28 / 29 / - 19 / 23 / 23 29 / 29 / - 23 / 23 / 23 23 / 23 / 26
m 48.31 48.31 54.35 54.35 54.35 54.35 54.35 60.39
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Condenser Fan - Propeller Direct Drive
ft 520.0 520.0 585.0 585.0 585.0 585.0 585.0 650.0
Face Area (Total)
Quantity # 16 16 18 18 18 18 18 20
m 48.31 48.31 54.35 54.35 54.35 54.35 54.35 60.39
cfm 188,160 188,160 211,680 211,680 211,680 211,680 211,680 235,200
Condenser Fan
Air Flow Rate - Propeller Direct Drive
l/s 88,802 88,802 99,902 99,902 99,902 99,902 99,902 111,002
Quantity # 16 16 18 18 18 18 18 20
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
cfm 188,160 188,160 211,680 211,680 211,680 211,680 211,680 235,200
Air
SizeFlow Rate
x Quantity kW x # 1.5 x 16 1.5 x 16 1.5 x 18 1.5 x 18 1.5 x 18 1.5 x 18 1.5 x 18 1.5 x 20
l/s 88,802 88,802 99,902 99,902 99,902 99,902 99,902 111,002
Evaporator - Direct Expansion Shell and Tube
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
Quantity # 1 1 1 1 1 1 1 1
Size x Quantity kW x # 1.5 x 16 1.5 x 16 1.5 x 18 1.5 x 18 1.5 x 18 1.5 x 18 1.5 x 18 1.5 x 20
Refrigerant Circuits # 3 2 3 2 3 2 3 3
Evaporator - Direct Expansion Shell and Tube
US Gal 120.9 94.2 120.9 94.2 120.9 94.2 114.1 114.1
Quantity
Water Volume # 1 1 1 1 1 1 1 1
Litre 457.7 356.6 457.7 356.6 457.7 356.6 431.9 431.9
Refrigerant Circuits # 3 2 3 2 3 2 3 3
lbs 683.1 680.8 768.8 751.9 783.4 751.9 800.0 871.6
Refrigerant Charge (R134a) US Gal 120.9 94.2 120.9 94.2 120.9 94.2 114.1 114.1
Water Volume kg 309.8 308.8 348.7 341.0 355.3 341.0 362.8 395.3
Litre 457.7 356.6 457.7 356.6 457.7 356.6 431.9 431.9
Table 1
lbs 683.1 680.8 768.8 751.9 783.4 751.9 800.0 871.6
Refrigerant Charge (R134a)
kg 309.8 308.8 348.7 341.0 355.3 341.0 362.8 395.3

8
SKM Compact Screw Chillers
APCY-H Series - R-134a
GENERAL DATA - 50 Hz
Model APCY 5175 DH 5185 DH 5195 DH 5210 DH 5230 DH 5250 DH 5265 DH 5285 DH 5285 TH
Compressor Model APCY - 5175 DH 5185 DH 5195 DH 5210 DH Semi Hermetic,
5230 DH Screw 5250 DH 5265 DH 5285 DH 5285 TH
Compressor
Qty #- 2 2 2 2 Semi Hermetic,
2 Screw 2 2 2 3
QtyCharge(CPI Solest 220)
Oil US#Gal 4.5 / 24.5 / - 4.5 /25 / - 5 / 25 / - 2 /-
5 / 6.1 6.1 / 26.1 / - 6.1 / 26.9 / - 6.9 / 26.9 / - 6.9 / 27.4 / - 4.5 /35 / 5
Oil Charge(CPI
Ckt (A / B / C ) Solest 220) US
LitreGal 4.5 4.5//--
17 / 17 4.5/ /195 / -
17 195 / 195 / /- - 5 / /6.1
19 23 / - 6.1 6.1//--
23 / 23 6.1 6.9//--
23 / 26 6.9 6.9//--
26 / 26 6.9 7.4//--
26 / 28 174.5/ 19
/ 5 // 19
5
Ckt (A / B Coil
Condenser /C) Litre
- 17 / 17 / - 17 / 19 / - 19Air/ Cooled
19 / - 3 rows,
19 16
/ 23fpi/ -(1.59mm)23fin/ 23spacing,
/ - copper23 / 26tubes
/ - Aluminum
26 / 26
fins/ - 26 / 28 / - 17 / 19 / 19
Condenser Coil ft- 325.0 325.0 Air390.0
Cooled 3 rows,390.0
16 fpi (1.59mm)390.0 fin spacing, copper 455.0tubes Aluminum fins
455.0 520.0 520.0
Face Area (Total)
mft 325.0
30.19 325.0
30.19 390.0
36.23 390.0
36.23 390.0
36.23 455.0
42.27 455.0
42.27 520.0
48.31 520.0
48.31
Face Area (Total)
Condenser Fan m- 30.19 30.19 36.23 36.23 Propeller36.23 Direct Drive 42.27 42.27 48.31 48.31
Condenser
Quantity Fan #- 10 10 12 12 Propeller 12 Direct Drive 14 14 16 16
Quantity cfm# 10
117,600 10
117,600 12
141,120 12
141,120 12
141,120 14
164,640 14
164,640 16
188,160 16
188,160
Air Flow Rate
cfm
l/s 117,600
55,501 117,600
55,501 141,120
66,601 141,120
66,601 141,120
66,601 164,640
77,701 164,640
77,701 188,160
88,802 188,160
88,802
Air Flow Rate
Condenser Fan Motor l/s- 55,501 55,501 66,601 66,601
Totally enclosed air over, Class66,601 77,701
F insulation, 6 pole, 77,701
IP - 55 protected 88,802 88,802
Condenser Fan Motor
Size x Quantity kW -x # 1.5 x 10 1.5 x 10 1.5 Totally
x 12 enclosed 1.5 air
x 12over, Class1.5F insulation,
x 12 6 pole,
1.5 xIP14- 55 protected
1.5 x 14 1.5 x 16 1.5 x 16
Size x Quantity
Evaporator kW-x # 1.5 x 10 1.5 x 10 1.5 x 12 1.5 xDirect
12 Expansion 1.5 x Shell
12 and Tube 1.5 x 14 1.5 x 14 1.5 x 16 1.5 x 16
Evaporator
Quantity #- 1 1 1 1Direct Expansion1 Shell and Tube1 1 1 1
Quantity Circuits
Refrigerant # 21 21 12 12 12 12 21 21 31
Refrigerant Circuits US#Gal 2
63.4 2
63.4 63.42 2
63.4 2
71.4 2
71.4 2
71.4 2
94.2 120.93
Water Volume
US
LitreGal 63.4
240.0 63.4
240.0 63.4
240.0 63.4
240.0 71.4
270.3 71.4
270.3 71.4
270.3 94.2
356.6 120.9
457.7
Water Volume
Litre
lbs 240.0
429.7 240.0
430.5 240.0
502.3 240.0
516.9 270.3
535.0 270.3
606.6 270.3
607.0 356.6
679.9 457.7
682.3
Refrigerant Charge (R134a)
lbs
kg 429.7
194.9 430.5
195.2 502.3
227.8 516.9
234.4 535.0
242.6 606.6
275.1 607.0
275.3 679.9
308.3 682.3
309.4
Refrigerant Charge (R134a)
kg 194.9 195.2 227.8 234.4 242.6 275.1 275.3 308.3 309.4

Model APCY 5380 TH 5395 TH 5410 TH 5425 TH 5455 TH 5475 TH 5495 TH 5520 TH
Compressor Model APCY - 5380 TH 5395 TH 5410 TH 5425
SemiTHHermetic,5455
ScrewTH 5475 TH 5495 TH 5520 TH
Compressor
Qty -# 3 3 3 Semi
3 Hermetic, Screw3 3 3 3
QtyCharge(CPI Solest 220)
Oil US#Gal 6.1 / 6.9 3 / 6.9 6.9 / 6.93 / 6.9 6.9 / 6.93 / 7.4 6.9 / 7.43 / 7.4 7.4 / 7.4 3 / 7.4 7.4 / 7.4 3 / 7.7 7.4 / 7.7 3 / 7.7 7.7 / 7.7 3 / 7.7
Oil Charge(CPI
Ckt (A / B / C ) Solest 220) US
LitreGal 6.1
23 / 6.9
26 // 26
6.9 6.9
26 / 6.9
26 // 26
6.9 6.9
26 / 6.9
26 // 28
7.4 6.9
26 / 7.4
28 // 28
7.4 7.428 / 7.4
28 // 28
7.4 7.428 / 7.4
28 // 29
7.7 7.4 28 / 7.7
29 // 29
7.7 7.729 / 7.7
29 // 29
7.7
Ckt (A / B / C ) Litre 23 / 26 / 26 26 / 26 / 26 26 / 26 / 28 26 / 28 / 28 28 / 28 / 28 Air28Cooled / 28 / 294 rows,2814/ fpi
29 (1.59mm)
/ 29 29fin/spacing,
29 / 29
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Air Cooledcopper
4 rows,tubes
14 fpiAluminum
(1.59mm)finsfin spacing,
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
ft 650.0 715.0 715.0 780.0 780.0 780.0 copper tubes Aluminum
780.0 fins 780.0
Face Area (Total)
mft 650.0
60.39 715.0
66.43 715.0
66.43 780.0
72.46 780.0
72.46 780.0
72.46 780.0
72.46 780.0
72.46
Face Area (Total)
Condenser Fan m- 60.39 66.43 66.43 72.46 72.46
Propeller Direct Drive 72.46 72.46 72.46
Condenser
Quantity Fan #- 20 22 22 Propeller
24 Direct Drive
24 24 24 24
Quantity cfm# 20
235,200 22
258,720 22
258,720 24
282,240 24
282,240 24
278,592 24
278,592 24
278,592
Air Flow Rate
cfm
l/s 235,200
111,002 258,720
122,102 258,720
122,102 282,240
133,202 282,240
133,202 278,592
131,481 278,592
131,481 278,592
131,481
Air Flow Rate
Condenser Fan Motor l/s- 111,002 122,102 Totally122,102 133,202
enclosed air over, 133,202
Class F insulation, 6 pole, IP - 131,481
55 protected 131,481 131,481
Condenser Fan Motor
Size x Quantity kW -x # 1.5 x 20 1.5 x 22 Totally1.5enclosed
x 22 air over,
1.5 Class
x 24 F insulation,
1.5 x 246 pole, IP - 1.5
55 protected
x 24 1.5 x 24 1.5 x 24
Size x Quantity
Evaporator kW-x # 1.5 x 20 1.5 x 22 1.5 x 22 Direct 1.5Expansion
x 24 Shell1.5and
x 24Tube 1.5 x 24 1.5 x 24 1.5 x 24
Evaporator
Quantity -# 1 1 1 Direct Expansion
1 Shell and
1 Tube 1 1 1
Quantity Circuits
Refrigerant # 31 31 31 31 31 31 31 31
Refrigerant Circuits US#Gal 3
114.1 3
114.1 3
114.1 3
114.1 3
172.0 172.03 3
172.0 3
163.5
Water Volume
US
LitreGal 114.1
431.9 114.1
431.9 114.1
431.9 114.1
431.9 172.0
651.1 172.0
651.1 172.0
651.1 163.5
618.9
Water Volume
Litre
lbs 431.9
872.0 431.9
943.6 431.9
944.5 431.9
1016.5 651.1
1021.0 651.1
1297.0 651.1
1297.0 618.9
1299.5
Refrigerant Charge (R134a)
lbs
kg 872.0
395.5 943.6
427.9 944.5
428.3 1016.5
461.0 1021.0
463.0 1297.0
588.2 1297.0
588.2 1299.5
589.3
Refrigerant Charge (R134a)
kg 395.5 427.9 428.3 461.0 463.0 588.2 588.2 589.3
Table 2

9
SKM Compact Screw Chillers
APCY-H Series - R-134a
GENERAL
Model DATAAPCY- 606090
HSHz 6100 SH 6120 SH 6140 SH 6160 SH 6175 SH 6185 DH 6195 DH 6205 DH
Compressor - Semi Hermetic, Screw
Qty # 1 1 1 1 1 1 2 2 2
Model APCY 6090 SH 6100 SH 6120 SH 6140 SH 6160 SH 6175 SH 6185 DH 6195 DH 6205 DH
Oil Charge(CPI Solest 220) US Gal 4.2 / - / - 4.5 / - / - 5/-/- 6.1 / - / - 6.9 / - / - 7.4 / - / - 4.2 / 4.2 / - 4.2 / 4.5 / - 4.5 / 4.5 / -
Compressor - Semi Hermetic, Screw
Ckt (A / B / C ) Litre 16 / - / - 17 / - / - 19 / - / - 23 / - / - 26 / - / - 28 / - / - 16 / 16 / - 16 / 17 / - 17 / 17 / -
Qty # 1 1 1 1 1 1 2 2 2
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Oil Charge(CPI Solest 220) US Gal 4.2 / - / - 4.5 / - / - 5/-/- 6.1 / - / - 6.9 / - / - 7.4 / - / - 4.2 / 4.2 / - 4.2 / 4.5 / - 4.5 / 4.5 / -
ft 162.5 162.5 195.0 227.5 260.0 292.5 325.0 325.0 325.0
Face(AArea
Ckt / B /(Total)
C) Litre 16 / - / - 17 / - / - 19 / - / - 23 / - / - 26 / - / - 28 / - / - 16 / 16 / - 16 / 17 / - 17 / 17 / -
m 15.10 15.10 18.12 21.14 24.15 27.17 30.19 30.19 30.19
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Condenser Fan - Propeller Direct Drive
ft 162.5 162.5 195.0 227.5 260.0 292.5 325.0 325.0 325.0
Quantity
Face Area (Total) # 5 5 6 7 8 9 10 10 10
m 15.10 15.10 18.12 21.14 24.15 27.17 30.19 30.19 30.19
cfm 67,105 67,105 80,526 93,947 107,368 120,789 134,210 134,210 134,210
Air Flow Rate
Condenser Fan - Propeller Direct Drive
l/s 31,670 31,670 38,004 44,338 50,672 57,006 63,340 63,340 63,340
Quantity # 5 5 6 7 8 9 10 10 10
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
cfm 67,105 67,105 80,526 93,947 107,368 120,789 134,210 134,210 134,210
SizeFlow
Air x Quantity
Rate kW x # 2x5 2x5 2x6 2x7 2x8 2x9 2 x 10 2 x 10 2 x 10
l/s 31,670 31,670 38,004 44,338 50,672 57,006 63,340 63,340 63,340
Evaporator - Direct Expansion Shell and Tube
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
Quantity # 1 1 1 1 1 1 1 1 1
Size x Quantity kW x # 2x5 2x5 2x6 2x7 2x8 2x9 2 x 10 2 x 10 2 x 10
Refrigerant Circuits # 1 1 1 1 1 1 2 2 2
Evaporator - Direct Expansion Shell and Tube
US Gal 22.1 31.5 36.4 36.4 36.4 36.4 63.4 63.4 63.4
Water Volume
Quantity # 1 1 1 1 1 1 1 1 1
Litre 83.7 119.2 137.8 137.8 137.8 137.8 240.0 240.0 240.0
Refrigerant Circuits # 1 1 1 1 1 1 2 2 2
lbs 213.2 214.3 253.3 303.4 339.4 375.9 429.7 429.7 429.7
Refrigerant Charge (R134a) US Gal 22.1 31.5 36.4 36.4 36.4 36.4 63.4 63.4 63.4
Water Volume kg 96.7 97.2 114.9 137.6 153.9 170.5 194.9 194.9 194.9
Litre 83.7 119.2 137.8 137.8 137.8 137.8 240.0 240.0 240.0
lbs 213.2 214.3 253.3 303.4 339.4 375.9 429.7 429.7 429.7
Refrigerant Charge (R134a)
kg 96.7 97.2 114.9 137.6 153.9 170.5 194.9 194.9 194.9

Model APCY 6310 TH 6320 DH 6320 TH 6340 DH 6345 TH 6355 TH 6360 DH 6375 TH 6385 DH
Compressor - Semi Hermetic, Screw
Qty # 3 2 3 2 3 3 2 3 2
Model APCY 6310 TH 6320 DH 6320 TH 6340 DH 6345 TH 6355 TH 6360 DH 6375 TH 6385 DH
Oil Charge(CPI Solest 220) US Gal 4.5 / 4.5 / 4.5 6.9 / 6.9 / - 4.5 / 4.5 / 5 6.9 / 7.4 / - 4.5 / 5 / 5 5/5/5 7.4 / 7.4 / - 5 / 5 / 6.1 7.4 / 7.7 / -
Compressor - Semi Hermetic, Screw
Ckt (A / B / C ) Litre 17 / 17 / 17 26 / 26 / - 17 / 17 / 19 26 / 28 / - 17 / 19 / 19 19 / 19 / 19 28 / 28 / - 19 / 19 / 23 28 / 29 / -
Qty # 3 2 3 2 3 3 2 3 2
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Oil Charge(CPI Solest 220) US Gal 4.5 / 4.5 / 4.5 6.9 / 6.9 / - 4.5 / 4.5 / 5 6.9 / 7.4 / - 4.5 / 5 / 5 5/5/5 7.4 / 7.4 / - 5 / 5 / 6.1 7.4 / 7.7 / -
ft 520.0 520.0 520.0 585.0 585.0 585.0 585.0 650.0 650.0
Face(AArea
Ckt / B /(Total)
C) Litre 17 / 17 / 17 26 / 26 / - 17 / 17 / 19 26 / 28 / - 17 / 19 / 19 19 / 19 / 19 28 / 28 / - 19 / 19 / 23 28 / 29 / -
m 48.31 48.31 48.31 54.35 54.35 54.35 54.35 60.39 60.39
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Condenser Fan - Propeller Direct Drive
ft 520.0 520.0 520.0 585.0 585.0 585.0 585.0 650.0 650.0
Quantity
Face Area (Total) # 16 16 16 18 18 18 18 20 20
m 48.31 48.31 48.31 54.35 54.35 54.35 54.35 60.39 60.39
cfm 214,736 214,736 214,736 241,578 241,578 241,578 241,578 268,420 268,420
Air Flow Rate
Condenser Fan - Propeller Direct Drive
l/s 101,344 101,344 101,344 114,012 114,012 114,012 114,012 126,680 126,680
Quantity # 16 16 16 18 18 18 18 20 20
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
cfm 214,736 214,736 214,736 241,578 241,578 241,578 241,578 268,420 268,420
SizeFlow
Air x Quantity
Rate kW x # 2 x 16 2 x 16 2 x 16 2 x 18 2 x 18 2 x 18 2 x 18 2 x 20 2 x 20
l/s 101,344 101,344 101,344 114,012 114,012 114,012 114,012 126,680 126,680
Evaporator - Direct Expansion Shell and Tube
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
Quantity # 1 1 1 1 1 1 1 1 1
Size x Quantity kW x # 2 x 16 2 x 16 2 x 16 2 x 18 2 x 18 2 x 18 2 x 18 2 x 20 2 x 20
Refrigerant Circuits # 3 2 3 2 3 3 2 3 2
Evaporator - Direct Expansion Shell and Tube
US Gal 120.9 94.2 120.9 94.2 114.1 114.1 94.2 114.1 94.2
Water Volume
Quantity # 1 1 1 1 1 1 1 1 1
Litre 457.7 356.6 457.7 356.6 431.9 431.9 356.6 431.9 356.6
Refrigerant Circuits # 3 2 3 2 3 3 2 3 2
lbs 680.7 679.0 681.5 751.0 755.5 756.2 751.9 841.9 823.0
Refrigerant Charge (R134a) US Gal 120.9 94.2 120.9 94.2 114.1 114.1 94.2 114.1 94.2
Water Volume kg 308.7 307.9 309.1 340.6 342.6 342.9 341.0 381.8 373.2
Litre 457.7 356.6 457.7 356.6 431.9 431.9 356.6 431.9 356.6
Table 3
lbs 680.7 679.0 681.5 751.0 755.5 756.2 751.9 841.9 823.0
Refrigerant Charge (R134a)
kg 308.7 307.9 309.1 340.6 342.6 342.9 341.0 381.8 373.2

10
SKM Compact Screw Chillers
APCY-H Series - R-134a
Model
GENERAL DATAAPCY- 606220
HDHz 6230 DH 6240 DH 6260 DH 6275 DH 6285 TH 6290 TH 6300 DH 6300 TH
Compressor - Semi Hermetic, Screw
Qty # 2 2 2 2 2 3 3 2 3
Model APCY 6220 DH 6230 DH 6240 DH 6260 DH 6275 DH 6285 TH 6290 TH 6300 DH 6300 TH
Oil Charge(CPI Solest 220) US Gal 4.5 / 5 / - 5/5/- 5/5/- 5 / 6.1 / - 6.1 / 6.1 / - 4.2 / 4.2 / 4.2 4.2 / 4.2 / 4.5 6.1 / 6.9 / - 4.2 / 4.5 / 4.5
Compressor - Semi Hermetic, Screw
Ckt (A / B / C ) Litre 17 / 19 / - 19 / 19 / - 19 / 19 / - 19 / 23 / - 23 / 23 / - 16 / 16 / 16 16 / 16 / 17 23 / 26 / - 16 / 17 / 17
Qty # 2 2 2 2 2 3 3 2 3
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Oil Charge(CPI Solest 220) US Gal 4.5 / 5 / - 5/5/- 5/5/- 5 / 6.1 / - 6.1 / 6.1 / - 4.2 / 4.2 / 4.2 4.2 / 4.2 / 4.5 6.1 / 6.9 / - 4.2 / 4.5 / 4.5
ft 390.0 390.0 390.0 455.0 455.0 520.0 520.0 520.0 520.0
Face
Ckt (AArea
/ B /(Total)
C) Litre 17 / 19 / - 19 / 19 / - 19 / 19 / - 19 / 23 / - 23 / 23 / - 16 / 16 / 16 16 / 16 / 17 23 / 26 / - 16 / 17 / 17
m 36.23 36.23 36.23 42.27 42.27 48.31 48.31 48.31 48.31
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Condenser Fan - Propeller Direct Drive
ft 390.0 390.0 390.0 455.0 455.0 520.0 520.0 520.0 520.0
Quantity
Face Area (Total) # 12 12 12 14 14 16 16 16 16
m 36.23 36.23 36.23 42.27 42.27 48.31 48.31 48.31 48.31
cfm 161,052 161,052 161,052 187,894 187,894 214,736 214,736 214,736 214,736
Air Flow Rate
Condenser Fan - Propeller Direct Drive
l/s 76,008 76,008 76,008 88,676 88,676 101,344 101,344 101,344 101,344
Quantity # 12 12 12 14 14 16 16 16 16
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
cfm 161,052 161,052 161,052 187,894 187,894 214,736 214,736 214,736 214,736
Size x Quantity
Air Flow Rate kW x # 2 x 12 2 x 12 2 x 12 2 x 14 2 x 14 2 x 16 2 x 16 2 x 16 2 x 16
l/s 76,008 76,008 76,008 88,676 88,676 101,344 101,344 101,344 101,344
Evaporator - Direct Expansion Shell and Tube
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
Quantity # 1 1 1 1 1 1 1 1 1
Size x Quantity kW x # 2 x 12 2 x 12 2 x 12 2 x 14 2 x 14 2 x 16 2 x 16 2 x 16 2 x 16
Refrigerant Circuits # 2 2 2 2 2 3 3 2 3
Evaporator - Direct Expansion Shell and Tube
US Gal 63.4 63.4 71.4 71.4 71.4 120.9 120.9 94.2 120.9
Water Volume
Quantity # 1 1 1 1 1 1 1 1 1
Litre 240.0 240.0 270.3 270.3 270.3 457.7 457.7 356.6 457.7
Refrigerant Circuits # 2 2 2 2 2 3 3 2 3
lbs 501.6 502.3 505.8 591.5 606.1 680.7 680.7 678.5 680.7
Refrigerant Charge (R134a) US Gal 63.4 63.4 71.4 71.4 71.4 120.9 120.9 94.2 120.9
Water Volume kg 227.5 227.8 229.4 268.3 274.9 308.7 308.7 307.7 308.7
Litre 240.0 240.0 270.3 270.3 270.3 457.7 457.7 356.6 457.7
lbs 501.6 502.3 505.8 591.5 606.1 680.7 680.7 678.5 680.7
Refrigerant Charge (R134a)
kg 227.5 227.8 229.4 268.3 274.9 308.7 308.7 307.7 308.7

Model APCY 6390 TH 6405 DH 6410 TH 6425 TH 6445 TH 6465 TH 6480 TH 6495 TH 6510 TH
Compressor - Semi Hermetic, Screw
Qty # 3 2 3 3 3 3 3 3 3
Model APCY 6390 TH 6405 DH 6410 TH 6425 TH 6445 TH 6465 TH 6480 TH 6495 TH 6510 TH
Oil Charge(CPI Solest 220) US Gal 5 / 6.1 / 6.1 7.7 / 7.7 / - 6.1 / 6.1 / 6.1 6.1 / 6.1 / 6.9 6.1 / 6.9 / 6.9 6.9 / 6.9 / 6.9 6.9 / 6.9 / 7.4 6.9 / 7.4 / 7.4 7.4 / 7.4 / 7.4
Compressor - Semi Hermetic, Screw
Ckt (A / B / C ) Litre 19 / 23 / 23 29 / 29 / - 23 / 23 / 23 23 / 23 / 26 23 / 26 / 26 26 / 26 / 26 26 / 26 / 28 26 / 28 / 28 28 / 28 / 28
Qty # 3 2 3 3 3 3 3 3 3
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Oil Charge(CPI Solest 220) US Gal 5 / 6.1 / 6.1 7.7 / 7.7 / - 6.1 / 6.1 / 6.1 6.1 / 6.1 / 6.9 6.1 / 6.9 / 6.9 6.9 / 6.9 / 6.9 6.9 / 6.9 / 7.4 6.9 / 7.4 / 7.4 7.4 / 7.4 / 7.4
ft 650.0 650.0 715.0 715.0 780.0 780.0 780.0 780.0 780.0
Face
Ckt (AArea
/ B /(Total)
C) Litre 19 / 23 / 23 29 / 29 / - 23 / 23 / 23 23 / 23 / 26 23 / 26 / 26 26 / 26 / 26 26 / 26 / 28 26 / 28 / 28 28 / 28 / 28
m 60.39 60.39 66.43 66.43 72.46 72.46 72.46 72.46 72.46
Condenser Coil - Air Cooled 3 rows, 16 fpi (1.59mm) fin spacing, copper tubes Aluminum fins
Condenser Fan - Propeller Direct Drive
ft 650.0 650.0 715.0 715.0 780.0 780.0 780.0 780.0 780.0
Quantity
Face Area (Total) # 20 20 22 22 24 24 24 24 24
m 60.39 60.39 66.43 66.43 72.46 72.46 72.46 72.46 72.46
cfm 268,420 268,420 295,262 295,262 322,104 322,104 322,104 322,104 322,104
Air Flow Rate
Condenser Fan - Propeller Direct Drive
l/s 126,680 126,680 139,348 139,348 152,016 152,016 152,016 152,016 152,016
Quantity # 20 20 22 22 24 24 24 24 24
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
cfm 268,420 268,420 295,262 295,262 322,104 322,104 322,104 322,104 322,104
Size x Quantity
Air Flow Rate kW x # 2 x 20 2 x 20 2 x 22 2 x 22 2 x 24 2 x 24 2 x 24 2 x 24 2 x 24
l/s 126,680 126,680 139,348 139,348 152,016 152,016 152,016 152,016 152,016
Evaporator - Direct Expansion Shell and Tube
Condenser Fan Motor - Totally enclosed air over, Class F insulation, 6 pole, IP - 55 protected
Quantity # 1 1 1 1 1 1 1 1 1
Size x Quantity kW x # 2 x 20 2 x 20 2 x 22 2 x 22 2 x 24 2 x 24 2 x 24 2 x 24 2 x 24
Refrigerant Circuits # 3 2 3 3 3 3 3 3 3
Evaporator - Direct Expansion Shell and Tube
US Gal 114.1 94.2 114.1 114.1 114.1 114.1 114.1 114.1 114.1
Water Volume
Quantity # 1 1 1 1 1 1 1 1 1
Litre 431.9 356.6 431.9 431.9 431.9 431.9 431.9 431.9 431.9
Refrigerant Circuits # 3 2 3 3 3 3 3 3 3
lbs 856.5 823.0 942.2 942.7 1014.2 1014.7 1015.6 1016.5 1017.5
Refrigerant Charge (R134a) US Gal 114.1 94.2 114.1 114.1 114.1 114.1 114.1 114.1 114.1
Water Volume kg 388.4 373.2 427.3 427.5 460.0 460.2 460.6 461.0 461.5
Litre 431.9 356.6 431.9 431.9 431.9 431.9 431.9 431.9 431.9
Table 4
lbs 856.5 823.0 942.2 942.7 1014.2 1014.7 1015.6 1016.5 1017.5
Refrigerant Charge (R134a)
kg 388.4 373.2 427.3 427.5 460.0 460.2 460.6 461.0 461.5

11
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 50 Hz (IP)
Model Condenser Entering Air Temperature °F
LCWT 95 105 115 118.4 125
EER CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °F TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg
42 73.8 70.4 177.0 11.4 71.2 81.1 170.9 10.6 68.4 93.2 164.3 9.9 67.4 97.6 161.9 9.6 65.4 106.7 157.0 9.1
5075 SH
44 76.2 71.0 183.0 12.1 73.7 81.9 176.8 11.3 70.8 94.2 170.0 10.5 69.8 98.7 167.6 10.2 67.8 107.9 162.6 9.7
11.6 45 77.5 71.4 186.1 12.5 74.9 82.3 179.9 11.7 72.1 94.7 173.0 10.9 71.1 99.3 170.6 10.6 69.0 108.6 165.6 10.0
48 81.3 72.3 195.0 13.6 78.6 83.5 188.7 12.8 75.7 96.2 181.6 11.9 74.6 100.9 179.1 11.6 72.5 110.5 174.0 11.0
42 80.8 80.8 193.9 13.5 78.0 93.0 187.1 12.6 74.9 106.7 179.6 11.7 73.7 111.7 176.9 11.3 71.5 121.9 171.5 10.7
5085 SH
44 83.5 81.7 200.5 14.4 80.6 94.1 193.6 13.4 77.5 108.0 186.0 12.5 76.3 113.1 183.2 12.1 74.1 123.3 177.7 11.4
11.2 45 85.0 82.1 203.9 14.8 82.0 94.7 196.9 13.9 78.9 108.6 189.3 12.9 77.7 113.7 186.5 12.5 75.4 124.1 181.0 11.8
48 89.1 83.5 213.8 16.2 86.1 96.3 206.6 15.2 82.8 110.5 198.8 14.1 81.7 115.6 196.0 13.8 79.3 126.1 190.3 13.0
42 91.4 89.4 219.4 17.1 88.3 103.0 211.9 16.0 84.8 118.2 203.6 14.8 83.6 123.8 200.6 14.4 81.1 135.1 194.5 13.6
5095 SH
44 94.5 90.4 226.9 18.2 91.3 104.1 219.2 17.0 87.8 119.6 210.8 15.8 86.6 125.2 207.8 15.4 84.0 136.6 201.6 14.5
11.4 45 96.1 90.8 230.7 18.8 92.9 104.7 223.0 17.6 89.4 120.2 214.5 16.3 88.1 125.9 211.5 15.9 85.5 137.4 205.3 15.0
48 100.9 92.3 242.2 20.7 97.6 106.5 234.3 19.4 94.0 122.2 225.6 18.0 92.7 127.9 222.4 17.5 90.0 139.5 216.1 16.6
42 111.9 112.5 268.7 5.1 107.8 129.4 258.7 4.8 103.3 148.1 247.9 4.4 101.7 154.9 244.0 4.3 98.4 168.7 236.1 4.0
5115 SH
44 115.5 113.9 277.2 5.4 111.3 131.0 267.1 5.1 106.7 149.9 256.2 4.7 105.1 156.8 252.3 4.6 101.8 170.7 244.3 4.3
11.3 45 117.9 114.8 283.0 5.6 113.7 132.1 272.9 5.3 109.2 151.2 262.0 4.9 107.5 158.1 258.0 4.7 104.2 172.1 250.1 4.5
48 123.7 117.0 296.9 6.1 119.4 134.6 286.6 5.8 114.7 154.0 275.3 5.3 113.1 161.0 271.3 5.2 109.7 175.2 263.2 4.9
42 130.1 122.8 312.2 6.7 125.5 141.4 301.3 6.3 120.5 162.2 289.3 5.9 118.7 169.8 285.0 5.7 115.1 185.2 276.2 5.4
5135 SH
44 134.2 124.0 322.0 7.2 129.6 142.9 311.0 6.7 124.5 163.9 298.9 6.2 122.7 171.6 294.5 6.1 119.0 187.1 285.7 5.7
11.8 45 136.8 124.8 328.3 7.4 132.2 143.9 317.3 7.0 127.2 165.1 305.2 6.5 125.3 172.8 300.8 6.3 121.7 188.4 292.1 6.0
48 143.7 127.0 344.9 8.1 139.0 146.4 333.6 7.6 133.8 167.9 321.1 7.1 131.9 175.7 316.7 6.9 128.2 191.6 307.7 6.6
42 144.8 145.1 347.5 8.3 139.6 166.9 334.9 7.7 133.8 191.2 321.1 7.1 131.7 200.0 316.2 6.9 127.6 218.0 306.1 6.5
5150 SH
44 149.3 146.8 358.4 8.8 144.0 168.9 345.7 8.2 138.2 193.4 331.7 7.6 136.1 202.4 326.7 7.4 131.9 220.5 316.6 6.9
11.3 45 152.1 147.8 365.0 9.1 146.8 170.1 352.2 8.5 141.0 194.8 338.3 7.9 138.9 203.8 333.3 7.6 134.7 222.0 323.3 7.2
48 159.9 150.7 383.7 10.0 154.4 173.4 370.6 9.3 148.5 198.5 356.3 8.7 146.3 207.6 351.2 8.4 142.0 226.1 340.8 8.0
42 152.5 142.0 365.9 7.6 147.2 163.7 353.2 7.1 141.4 188.2 339.3 6.6 139.3 197.2 334.2 6.4 135.0 215.6 324.1 6.0
5155 DH
44 157.3 143.3 377.5 8.1 152.0 165.3 364.7 7.6 146.1 190.2 350.6 7.0 144.0 199.4 345.6 6.8 139.7 218.1 335.3 6.4
11.9 45 160.7 144.2 385.6 8.5 155.3 166.4 372.8 7.9 149.5 191.6 358.8 7.3 147.4 200.9 353.7 7.1 143.1 220.0 343.5 6.7
48 168.6 146.2 404.7 9.3 163.2 169.0 391.6 8.7 157.1 194.9 377.1 8.1 155.0 204.4 371.9 7.9 150.6 224.0 361.4 7.5
42 160.1 152.6 384.1 8.4 154.4 175.9 370.6 7.8 148.3 202.0 355.8 7.2 146.0 211.5 350.5 7.0 141.6 230.9 339.7 6.6
5165 DH
44 165.1 154.1 396.3 8.9 159.4 177.7 382.6 8.3 153.2 204.2 367.7 7.7 151.0 213.8 362.3 7.5 146.4 233.6 351.4 7.1
11.7 45 168.6 155.1 404.5 9.3 162.9 179.0 390.9 8.7 156.7 205.7 376.0 8.1 154.4 215.5 370.7 7.8 149.9 235.4 359.9 7.4
48 177.0 157.6 424.7 10.2 171.1 182.0 410.7 9.5 164.7 209.3 395.4 8.9 162.4 219.2 389.9 8.6 157.8 239.6 378.8 8.2
42 167.5 163.5 402.0 9.2 161.5 188.3 387.7 8.6 155.0 216.0 372.1 7.9 152.7 226.1 366.4 7.7 147.9 246.6 355.1 7.2
5175 DH
44 172.8 165.2 414.6 9.7 166.7 190.4 400.2 9.1 160.2 218.4 384.4 8.4 157.8 228.6 378.7 8.2 153.0 249.3 367.2 7.7
11.5 45 176.3 166.4 423.1 10.1 170.3 191.8 408.6 9.5 163.7 220.1 392.9 8.8 161.4 230.3 387.2 8.5 156.6 251.2 375.8 8.1
48 185.1 169.3 444.3 11.0 178.9 195.2 429.4 10.4 172.2 223.9 413.2 9.7 169.8 234.3 407.4 9.4 164.9 255.5 395.7 8.9
42 177.6 178.2 426.1 10.2 171.1 205.1 410.7 9.5 164.1 235.1 393.8 8.8 161.5 246.0 387.7 8.6 156.4 268.2 375.4 8.0
5185 DH
44 183.1 180.2 439.4 10.8 176.6 207.5 423.8 10.1 169.5 237.8 406.7 9.4 166.9 248.8 400.6 9.1 161.7 271.2 388.2 8.6
11.3 45 186.7 181.5 448.1 11.2 180.2 209.1 432.5 10.5 173.1 239.7 415.4 9.7 170.6 250.7 409.3 9.5 165.4 273.3 397.0 8.9
48 196.1 185.0 470.7 12.3 189.4 213.0 454.6 11.5 182.1 244.1 437.1 10.7 179.5 255.3 430.8 10.4 174.2 278.1 418.2 9.9
42 190.3 181.1 456.8 11.6 183.7 208.6 440.9 10.9 176.4 239.4 423.5 10.1 173.8 250.6 417.2 9.8 168.5 273.5 404.5 9.3
5195 DH
44 196.2 182.9 471.0 12.3 189.5 210.8 454.9 11.5 182.2 241.9 437.3 10.7 179.6 253.2 430.9 10.4 174.2 276.2 418.1 9.9
11.7 45 200.0 184.0 479.9 12.7 193.3 212.2 463.9 12.0 186.0 243.5 446.3 11.1 183.3 254.9 440.0 10.8 178.0 278.1 427.3 10.3
48 210.2 187.1 504.5 13.9 203.3 215.8 488.0 13.1 195.8 247.6 469.9 12.2 193.1 259.2 463.5 11.9 187.7 282.6 450.4 11.3
Table 5

Notes:

Capacity ratings are based on 10ºF range and 0.0001h . ft² . ºF/Btu fouling factor.
* Power input mentioned in this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical data
pages (28 to 32) should be referred for the same.

12
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 50 Hz (IP)
Model Condenser Entering Air Temperature °F
LCWT 95 105 115 118.4 125
EER CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °F TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg
42 203.9 201.3 489.4 13.2 196.7 231.8 472.1 12.3 188.8 265.8 453.1 11.4 185.9 278.1 446.2 11.1 180.1 303.3 432.3 10.5
5210 DH
44 210.2 203.5 504.5 13.9 202.9 234.4 487.0 13.1 194.9 268.7 467.7 12.1 192.0 281.2 460.8 11.8 186.2 306.5 446.8 11.2
11.4 45 214.1 204.8 513.7 14.4 206.7 235.9 496.2 13.5 198.8 270.5 477.0 12.6 195.9 283.1 470.1 12.2 190.1 308.6 456.2 11.6
48 225.1 208.6 540.2 15.8 217.6 240.3 522.2 14.8 209.4 275.5 502.5 13.8 206.4 288.2 495.4 13.5 200.5 314.0 481.1 12.8
42 223.3 224.8 536.0 9.9 215.3 258.6 516.7 9.2 206.5 296.2 495.6 8.5 203.3 309.9 488.0 8.2 197.0 337.6 472.7 7.7
5230 DH
44 231.3 227.8 555.2 10.6 223.1 262.2 535.5 9.9 214.2 300.2 514.1 9.1 211.0 314.0 506.4 8.9 204.5 342.0 490.9 8.3
11.3 45 235.3 229.4 564.7 10.9 227.0 263.9 544.9 10.2 218.0 302.2 523.3 9.4 214.8 316.0 515.5 9.2 208.3 344.1 499.9 8.6
48 247.6 234.1 594.2 12.0 239.1 269.3 573.8 11.2 229.9 308.2 551.7 10.4 226.6 322.3 543.8 10.2 219.9 350.8 527.9 9.6
42 241.1 234.4 578.7 11.4 232.7 269.9 558.5 10.7 223.5 309.5 536.4 9.9 220.2 323.8 528.4 9.6 213.5 353.1 512.3 9.1
5250 DH
44 249.8 237.3 599.5 12.2 241.2 273.3 578.9 11.4 231.8 313.4 556.4 10.6 228.5 327.9 548.4 10.3 221.7 357.5 532.0 9.7
11.6 45 254.1 238.8 609.9 12.6 245.5 275.1 589.1 11.8 236.0 315.3 566.5 11.0 232.6 330.0 558.3 10.7 225.8 359.7 541.9 10.1
48 267.5 243.3 641.9 13.9 258.6 280.3 620.6 13.0 248.9 321.3 597.4 12.1 245.5 336.1 589.1 11.8 238.5 366.3 572.3 11.2
42 255.5 257.0 613.2 12.7 246.4 295.8 591.4 11.9 236.5 338.9 567.5 11.0 232.9 354.6 558.9 10.7 225.6 386.5 541.5 10.1
5265 DH
44 264.7 260.5 635.3 13.6 255.4 299.8 613.1 12.7 245.3 343.5 588.8 11.8 241.7 359.4 580.0 11.5 234.3 391.6 562.4 10.8
11.3 45 269.3 262.2 646.4 14.1 260.0 301.8 623.9 13.2 249.8 345.8 599.4 12.2 246.1 361.8 590.6 11.9 238.7 394.2 572.8 11.2
48 283.5 267.5 680.3 15.5 273.9 308.0 657.3 14.5 263.4 352.7 632.2 13.5 259.6 369.0 623.2 13.1 252.1 401.9 605.0 12.4
42 278.5 268.6 668.4 6.9 268.8 309.3 645.0 6.4 258.1 354.6 619.5 5.9 254.3 371.1 610.3 5.7 246.5 404.6 591.7 5.3
5285 DH
44 288.4 272.0 692.1 7.3 278.4 313.2 668.1 6.8 267.5 359.0 641.9 6.3 263.5 375.6 632.5 6.1 255.6 409.4 613.5 5.7
11.7 45 292.8 273.5 702.8 7.5 282.7 314.9 678.4 7.1 271.6 361.0 651.9 6.5 267.7 377.6 642.4 6.3 259.6 411.5 623.1 5.9
48 304.3 277.4 730.2 8.1 293.8 319.4 705.0 7.6 282.3 365.9 677.6 7.0 278.2 382.7 667.7 6.8 270.0 416.9 647.9 6.4
42 275.4 269.2 660.9 6.0 265.8 310.1 637.9 5.6 255.3 355.7 612.7 5.2 251.5 372.3 603.6 5.1 243.9 406.1 585.3 4.8
5285 TH
44 285.1 272.6 684.2 6.3 275.3 314.0 660.7 6.0 264.6 360.2 635.0 5.6 260.8 376.9 625.8 5.4 253.0 410.9 607.2 5.1
11.5 45 289.8 274.2 695.6 6.5 279.9 315.9 671.8 6.1 269.1 362.3 645.9 5.7 265.2 379.1 636.6 5.6 257.4 413.2 617.7 5.3
48 300.4 277.8 720.9 6.9 290.1 320.0 696.2 6.5 278.8 366.8 669.2 6.1 274.8 383.7 659.5 5.9 266.6 418.0 639.9 5.6
42 285.1 283.9 684.3 6.3 275.1 327.0 660.3 6.0 264.1 374.9 633.9 5.5 260.1 392.3 624.3 5.4 252.1 427.7 605.1 5.1
5295 TH
44 295.2 287.6 708.5 6.7 285.0 331.2 683.9 6.3 273.8 379.7 657.0 5.9 269.7 397.2 647.4 5.8 261.6 432.9 627.8 5.4
11.4 45 300.2 289.4 720.4 6.9 289.8 333.3 695.5 6.5 278.5 382.0 668.3 6.1 274.4 399.6 658.6 5.9 266.2 435.4 638.8 5.6
48 311.4 293.5 747.4 7.4 300.6 337.9 721.4 6.9 288.8 387.0 693.0 6.5 284.5 404.7 682.8 6.3 276.0 440.7 662.3 6.0
42 293.0 291.4 703.3 7.5 282.6 335.3 678.2 7.1 271.2 384.2 650.9 6.5 267.1 402.0 641.0 6.3 258.8 438.1 621.1 5.9
5300 DH
44 303.5 295.3 728.5 8.0 292.8 339.9 702.8 7.5 281.2 389.3 674.8 7.0 277.0 407.2 664.7 6.8 268.5 443.6 644.4 6.4
11.4 45 308.3 297.1 740.0 8.3 297.5 341.9 713.9 7.8 285.6 391.5 685.5 7.2 281.4 409.5 675.3 7.0 272.8 446.0 654.8 6.6
48 320.7 301.7 769.6 8.9 309.4 347.1 742.6 8.3 297.2 397.2 713.2 7.7 292.8 415.3 702.6 7.5 283.9 452.1 681.4 7.1
42 301.4 292.4 723.3 7.0 291.0 336.9 698.5 6.6 279.7 386.5 671.2 6.1 275.6 404.6 661.4 6.0 267.3 441.3 641.5 5.7
5310 TH
44 312.1 296.0 749.0 7.4 301.5 341.1 723.7 7.0 290.0 391.3 696.0 6.5 285.8 409.5 686.0 6.4 277.4 446.5 665.8 6.0
11.6 45 317.4 297.8 761.8 7.6 306.8 343.2 736.2 7.2 295.1 393.6 708.2 6.7 290.9 411.9 698.1 6.6 282.4 449.1 677.7 6.2
48 329.9 301.9 791.7 8.1 318.7 347.8 764.9 7.7 306.5 398.7 735.5 7.2 302.1 417.1 725.0 7.0 293.2 454.5 703.8 6.7
42 314.9 307.1 755.8 8.6 303.9 353.6 729.4 8.1 291.9 405.3 700.6 7.5 287.6 424.2 690.2 7.3 278.8 462.5 669.2 6.9
5325 DH
44 326.4 311.1 783.4 9.1 315.2 358.2 756.4 8.6 302.9 410.6 726.8 8.0 298.4 429.6 716.2 7.8 289.5 468.3 694.7 7.4
11.6 45 331.8 313.0 796.3 9.4 320.3 360.4 768.8 8.8 307.8 413.0 738.8 8.3 303.4 432.1 728.0 8.0 294.3 470.9 706.3 7.6
48 345.7 317.8 829.6 10.1 333.7 365.9 801.0 9.5 320.8 419.1 769.8 8.9 316.1 438.4 758.7 8.6 306.7 477.5 736.1 8.2
42 314.5 313.1 754.8 7.5 303.6 360.5 728.6 7.1 291.6 413.4 699.9 6.6 287.3 432.6 689.5 6.4 278.6 471.7 668.5 6.1
5325 TH
44 325.8 317.1 781.9 8.0 314.6 365.2 755.1 7.5 302.4 418.7 725.8 7.0 298.0 438.1 715.2 6.8 289.1 477.6 693.9 6.5
11.4 45 331.4 319.1 795.4 8.2 320.1 367.5 768.2 7.7 307.8 421.3 738.6 7.2 303.3 440.8 727.9 7.1 294.3 480.4 706.4 6.7
48 344.9 323.9 827.6 8.8 333.0 372.9 799.1 8.2 320.0 427.2 768.1 7.7 315.4 446.8 757.0 7.5 306.0 486.7 734.5 7.2
Table 6

Notes:
Notes:
Capacity ratings are based on 10ºF range and 0.0001h ft ºF/Btu fouling factor.
* Power input mentioned
Capacity in this page
ratings areshould
based not beon
used10ºF
for cablerange
or fuse selection. MCA and MFA. values
and 0.0001h given in thefouling
ft² . ºF/Btu electrical data
factor.
* pages (17 to 19)input
Power should be referred for the same.
mentioned in this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical data
pages (28 to 32) should be referred for the same.

13
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 50 Hz (IP)
Model Condenser Entering Air Temperature °F
LCWT 95 105 115 118.4 125
EER CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °F TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg
42 333.2 336.1 799.7 9.5 321.4 386.6 771.4 8.9 308.5 442.9 740.3 8.3 303.8 463.3 729.1 8.1 294.4 504.9 706.5 7.6
5345 DH
44 345.6 340.8 829.4 10.0 333.4 392.1 800.3 9.5 320.2 449.1 768.4 8.8 315.4 469.8 757.0 8.6 305.8 511.8 733.8 8.2
11.3 45 351.4 343.0 843.4 10.3 339.1 394.7 813.8 9.7 325.6 452.0 781.4 9.1 320.7 472.7 769.8 8.9 311.0 514.9 746.3 8.4
48 366.6 348.8 879.9 11.1 353.7 401.3 848.9 10.4 339.7 459.3 815.2 9.8 334.6 480.3 803.1 9.5 324.4 522.9 778.6 9.0
42 334.0 336.8 801.5 8.4 322.1 387.6 773.0 7.9 309.1 444.0 741.8 7.3 304.4 464.5 730.6 7.0 294.9 506.1 707.9 6.6
5345 TH
44 345.1 341.0 828.2 8.9 333.0 392.5 799.2 8.4 319.8 449.6 767.5 7.8 315.1 470.2 756.2 7.5 305.5 512.2 733.2 7.1
11.3 45 351.0 343.3 842.3 9.2 338.8 395.1 813.1 8.6 325.5 452.5 781.2 8.0 320.7 473.3 769.7 7.8 311.1 515.5 746.6 7.4
48 365.5 348.8 877.2 9.9 352.8 401.4 846.7 9.3 339.0 459.4 813.6 8.7 334.1 480.4 801.8 8.4 324.1 522.9 777.8 8.0
42 351.5 346.0 843.6 9.2 339.3 398.5 814.3 8.7 325.9 456.9 782.1 8.0 321.1 478.1 770.6 7.8 311.3 521.2 747.2 7.4
5365 TH
44 363.2 350.2 871.8 9.8 350.8 403.3 842.0 9.2 337.2 462.4 809.4 8.6 332.3 483.8 797.6 8.3 322.5 527.4 773.9 7.9
11.5 45 369.5 352.4 886.7 10.1 356.9 405.9 856.7 9.5 343.2 465.3 823.8 8.8 338.3 486.8 812.0 8.6 328.4 530.6 788.1 8.2
48 385.3 357.9 924.7 10.8 372.2 412.2 893.3 10.2 357.9 472.3 859.1 9.5 352.8 494.0 846.8 9.3 342.5 538.2 822.0 8.8
42 365.6 368.8 877.4 9.9 352.8 424.5 846.6 9.3 338.7 486.5 812.8 8.6 333.6 509.0 800.6 8.4 323.3 554.9 776.0 7.9
5380 TH
44 377.8 373.4 906.8 10.4 364.8 429.9 875.4 9.8 350.5 492.6 841.1 9.2 345.3 515.4 828.7 8.9 334.9 561.7 803.8 8.5
11.2 45 384.3 375.9 922.4 10.7 371.1 432.7 890.7 10.1 356.7 495.8 856.1 9.5 351.5 518.7 843.7 9.2 341.1 565.2 818.5 8.7
48 401.2 382.2 962.8 11.6 387.4 439.9 929.7 10.9 372.3 503.8 893.6 10.2 366.9 526.9 880.6 9.9 356.0 573.8 854.4 9.4
42 382.6 378.1 918.2 10.7 369.5 435.4 886.7 10.1 355.0 499.3 852.1 9.4 349.8 522.6 839.6 9.1 339.3 569.9 814.3 8.7
5395 TH
44 395.5 382.6 949.1 11.3 382.1 440.7 917.0 10.6 367.4 505.4 881.8 10.0 362.2 528.9 869.2 9.7 351.5 576.7 843.5 9.2
11.4 45 402.3 385.0 965.6 11.6 388.8 443.5 933.2 11.0 374.0 508.6 897.7 10.3 368.7 532.2 884.9 10.0 357.9 580.3 859.0 9.5
48 420.5 391.3 1009.3 12.5 406.4 450.8 975.2 11.8 390.9 516.7 938.1 11.1 385.3 540.5 924.8 10.8 374.1 589.1 897.8 10.3
42 396.3 400.5 951.0 11.3 382.5 461.1 918.1 10.7 367.4 528.7 881.9 10.0 362.0 553.2 868.8 9.7 351.0 603.2 842.3 9.2
5410 TH
44 409.7 405.6 983.2 12.0 395.7 467.0 949.6 11.3 380.3 535.3 912.7 10.6 374.8 560.1 899.5 10.3 363.6 610.6 872.6 9.8
11.2 45 416.8 408.2 1000.3 12.3 402.6 470.1 966.3 11.6 387.1 538.8 929.2 10.9 381.6 563.8 915.8 10.6 370.3 614.4 888.7 10.1
48 436.1 415.5 1046.5 13.3 421.2 478.3 1010.8 12.5 405.0 547.8 971.9 11.7 399.1 573.0 957.9 11.5 387.4 624.1 929.7 10.9
42 412.7 409.8 990.5 12.1 398.7 472.0 956.9 11.4 383.3 541.5 919.9 10.7 377.6 566.7 906.2 10.4 366.5 618.3 879.5 9.9
5425 TH
44 426.8 414.8 1024.2 12.8 412.5 477.8 989.9 12.1 396.8 548.1 952.3 11.3 391.1 573.6 938.7 11.1 379.7 625.5 911.3 10.5
11.4 45 434.2 417.4 1042.1 13.2 419.8 480.9 1007.5 12.5 404.0 551.5 969.5 11.7 398.3 577.2 955.9 11.4 386.7 629.3 928.2 10.9
48 454.9 424.7 1091.8 14.3 439.7 489.2 1055.3 13.5 423.1 560.6 1015.5 12.6 417.2 586.5 1001.2 12.3 405.1 639.1 972.3 11.7
42 436.3 435.9 1047.2 12.0 421.0 501.7 1010.5 11.3 404.3 575.1 970.3 10.4 398.2 601.7 955.8 10.1 386.0 656.0 926.5 9.6
5455 TH
44 453.2 442.2 1087.7 12.9 437.5 509.0 1050.0 12.1 420.4 583.2 1008.9 11.2 414.2 610.1 994.1 10.9 401.7 664.8 964.2 10.3
11.4 45 461.0 445.1 1106.3 13.3 445.0 512.3 1068.1 12.5 427.6 586.9 1026.3 11.6 421.4 613.9 1011.4 11.3 408.8 668.7 981.1 10.7
48 480.8 452.5 1153.8 14.4 464.2 520.7 1114.1 13.5 446.2 596.1 1070.9 12.5 439.8 623.3 1055.5 12.2 426.8 678.6 1024.2 11.5
42 456.9 455.1 1096.5 13.1 440.9 523.8 1058.3 12.3 423.5 600.5 1016.4 11.4 417.2 628.3 1001.3 11.1 404.5 685.1 970.9 10.4
5475 TH
44 474.7 461.6 1139.3 14.1 458.4 531.5 1100.1 13.2 440.5 609.1 1057.3 12.2 434.1 637.2 1041.8 11.9 421.1 694.5 1010.7 11.3
11.4 45 483.0 464.7 1159.2 14.5 466.4 535.0 1119.4 13.6 448.3 613.0 1076.0 12.6 441.8 641.2 1060.3 12.3 428.7 698.7 1028.8 11.6
48 504.2 472.5 1210.1 15.7 487.0 543.8 1168.7 14.7 468.2 622.8 1123.7 13.7 461.5 651.3 1107.5 13.3 447.9 709.3 1074.9 12.6
42 474.8 484.3 1139.4 14.1 458.0 557.2 1099.2 13.2 439.7 638.4 1055.2 12.2 433.0 667.9 1039.3 11.9 419.7 727.9 1007.3 11.2
5495 TH
44 493.4 491.6 1184.1 15.1 476.2 565.7 1142.9 14.1 457.4 648.0 1097.8 13.1 450.7 677.8 1081.6 12.8 437.0 738.5 1048.9 12.1
11.2 45 502.2 495.1 1205.3 15.6 484.7 569.7 1163.3 14.6 465.7 652.4 1117.6 13.6 458.8 682.4 1101.1 13.2 445.0 743.3 1067.9 12.5
48 524.6 503.9 1259.1 16.9 506.4 579.7 1215.4 15.8 486.6 663.5 1167.9 14.7 479.5 693.8 1150.8 14.3 465.2 755.3 1116.4 13.5
42 501.1 518.0 1202.7 15.3 482.9 595.5 1159.0 14.3 463.0 681.6 1111.3 13.2 455.9 712.8 1094.1 12.8 441.4 776.3 1059.4 12.0
5520 TH
44 519.0 525.4 1245.6 16.3 500.5 604.2 1201.2 15.2 480.4 691.5 1152.9 14.1 473.1 723.2 1135.5 13.7 458.5 787.5 1100.4 12.9
11.1 45 528.7 529.5 1268.9 16.9 510.1 608.9 1224.3 15.8 489.8 696.9 1175.5 14.6 482.5 728.8 1158.0 14.2 467.8 793.4 1122.7 13.4
48 550.2 538.5 1320.5 18.2 530.5 619.0 1273.3 17.0 509.1 707.8 1221.9 15.7 501.5 740.0 1203.5 15.3 486.0 805.1 1166.3 14.4
Table 7
Notes:
Notes:
Capacity ratings are based on 10ºF range and 0.0001h ft ºF/Btu fouling factor.
* Power input mentioned
Capacity in this page
ratings areshould
based not beon
used10ºF
for cablerange
or fuse selection. MCA and MFA. values
and 0.0001h given in thefouling
ft² . ºF/Btu electrical data
factor.
* pages (17 to 19)input
Power should be referred for the same.
mentioned in this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical data
pages (28 to 32) should be referred for the same.

14
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 60 Hz (IP)
Model Condenser Entering Air Temperature °F
LCWT 95 105 115 118.4 125
EER CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °F TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg
42 86.5 86.9 207.5 15.3 83.4 100.1 200.2 14.3 80.1 114.9 192.2 13.3 78.9 120.3 189.4 12.9 76.5 131.4 183.5 12.1
6090 SH
44 89.4 87.8 214.5 16.3 86.3 101.2 207.1 15.3 82.9 116.2 199.0 14.2 81.7 121.8 196.1 13.8 79.2 133.1 190.2 13.0
11 45 90.9 88.2 218.2 16.9 87.8 101.7 210.7 15.8 84.4 117.0 202.5 14.6 83.2 122.5 199.6 14.2 80.7 134.0 193.6 13.4
48 95.4 89.6 228.9 18.5 92.2 103.4 221.3 17.3 88.7 119.1 212.8 16.1 87.4 124.8 209.8 15.7 84.9 136.6 203.7 14.8
42 97.8 101.3 234.7 4.6 94.2 116.5 226.1 4.3 90.2 133.4 216.5 4.0 88.8 139.6 213.1 3.9 85.9 152.1 206.1 3.6
6100 SH
44 101.0 102.5 242.4 4.9 97.3 117.9 233.6 4.6 93.3 135.1 224.0 4.2 91.9 141.3 220.5 4.1 89.0 153.9 213.5 3.9
10.8 45 102.6 103.1 246.3 5.0 99.0 118.7 237.5 4.7 94.9 135.9 227.9 4.4 93.5 142.2 224.4 4.3 90.6 154.8 217.4 4.0
48 107.8 105.1 258.8 5.5 104.1 121.0 249.9 5.2 100.1 138.6 240.2 4.8 98.6 144.9 236.7 4.7 95.7 157.8 229.7 4.4
42 115.2 113.3 276.5 5.4 111.0 130.3 266.5 5.0 106.5 149.4 255.6 4.7 104.8 156.3 251.6 4.5 101.5 170.4 243.6 4.3
6120 SH
44 118.9 114.4 285.3 5.7 114.7 131.7 275.2 5.3 110.0 151.0 264.1 4.9 108.4 158.0 260.1 4.8 105.0 172.3 252.1 4.5
11.3 45 121.3 115.2 291.2 5.9 117.1 132.6 281.1 5.5 112.5 152.1 270.0 5.2 110.8 159.2 266.0 5.0 107.5 173.7 258.0 4.7
48 127.4 117.1 305.7 6.5 123.0 134.9 295.2 6.1 118.3 154.8 283.8 5.7 116.6 162.0 279.7 5.5 113.1 176.8 271.5 5.2
42 133.6 131.9 320.5 7.1 128.8 151.8 309.0 6.6 123.5 173.9 296.4 6.1 121.6 182.0 291.9 6.0 117.8 198.4 282.7 5.6
6140 SH
44 137.8 133.3 330.6 7.5 132.9 153.4 319.0 7.0 127.6 175.8 306.2 6.5 125.7 183.9 301.6 6.3 121.8 200.5 292.4 6.0
11.2 45 140.4 134.1 337.0 7.8 135.5 154.4 325.3 7.3 130.2 177.0 312.6 6.8 128.3 185.2 308.0 6.6 124.5 202.0 298.8 6.2
48 147.5 136.4 354.1 8.6 142.5 157.1 342.1 8.0 137.1 180.1 328.9 7.4 135.1 188.5 324.2 7.2 131.1 205.6 314.7 6.9
42 152.7 152.1 366.5 9.1 147.2 175.0 353.4 8.5 141.3 200.6 339.0 7.9 139.1 209.9 333.9 7.7 134.8 228.8 323.4 7.2
6160 SH
44 157.5 153.7 378.0 9.7 152.0 176.9 364.7 9.1 145.9 202.7 350.2 8.4 143.7 212.2 344.9 8.1 139.3 231.4 334.4 7.7
11.1 45 160.3 154.6 384.8 10.0 154.8 178.0 371.5 9.4 148.7 204.1 357.0 8.7 146.6 213.6 351.8 8.5 142.2 233.0 341.2 8.0
48 168.6 157.3 404.7 11.1 162.9 181.2 391.0 10.3 156.7 207.8 376.0 9.6 154.4 217.5 370.7 9.3 149.9 237.3 359.8 8.8
42 171.2 172.2 411.0 11.4 165.2 198.2 396.4 10.6 158.5 227.0 380.4 9.8 156.1 237.5 374.6 9.5 151.2 258.9 363.0 9.0
6175 SH
44 176.7 174.0 424.0 12.1 170.5 200.3 409.2 11.3 163.7 229.5 392.9 10.4 161.3 240.1 387.1 10.2 156.4 261.8 375.3 9.6
11 45 179.6 175.0 431.1 12.5 173.5 201.4 416.3 11.7 166.7 230.9 400.1 10.8 164.3 241.6 394.3 10.5 159.4 263.5 382.5 9.9
48 189.1 178.1 453.8 13.8 182.7 205.1 438.5 12.9 175.8 235.2 421.9 12.0 173.3 246.2 415.9 11.7 168.2 268.6 403.8 11.0
42 179.6 175.8 431.1 10.4 173.3 202.6 415.8 9.8 166.3 232.7 399.0 9.0 163.7 243.7 393.0 8.8 158.6 266.3 380.7 8.3
6185 DH
44 185.2 177.5 444.5 11.1 178.8 204.7 429.1 10.4 171.7 235.3 412.1 9.6 169.2 246.6 406.0 9.3 164.0 269.6 393.7 8.8
11.3 45 188.9 178.6 453.2 11.5 182.4 206.1 437.8 10.7 175.4 237.1 420.9 10.0 172.9 248.5 414.8 9.7 167.7 271.9 402.5 9.2
48 198.4 181.5 476.2 12.5 191.8 209.7 460.3 11.8 184.6 241.7 442.9 11.0 181.9 253.4 436.7 10.7 176.7 277.5 424.0 10.1
42 188.3 189.2 452.0 11.4 181.5 217.9 435.6 10.6 174.0 249.9 417.7 9.8 171.3 261.5 411.2 9.6 165.9 285.3 398.1 9.0
6195 DH
44 194.1 191.2 466.0 12.0 187.3 220.3 449.5 11.3 179.7 252.8 431.4 10.5 177.0 264.6 424.9 10.2 171.6 288.8 411.7 9.6
11 45 197.9 192.5 474.8 12.5 191.0 221.8 458.4 11.7 183.5 254.7 440.4 10.9 180.8 266.7 434.0 10.6 175.4 291.1 420.9 10.0
48 207.9 196.0 499.0 13.7 200.9 226.0 482.2 12.8 193.2 259.6 463.8 11.9 190.5 271.9 457.2 11.6 185.0 296.9 443.9 11.0
42 196.8 203.0 472.3 12.4 189.6 233.5 454.9 11.5 181.6 267.5 435.8 10.7 178.7 279.8 428.9 10.3 172.9 304.8 414.9 9.7
6205 DH
44 202.9 205.3 486.9 13.1 195.6 236.3 469.4 12.2 187.6 270.6 450.1 11.3 184.7 283.0 443.2 11.0 178.9 308.3 429.3 10.4
10.8 45 206.6 206.8 496.0 13.5 199.4 238.0 478.5 12.6 191.4 272.6 459.4 11.7 188.6 285.2 452.6 11.4 182.8 310.7 438.8 10.8
48 217.2 210.8 521.4 14.8 209.8 242.7 503.5 13.9 201.7 277.9 484.1 12.9 198.8 290.7 477.2 12.6 193.0 316.6 463.2 11.9
42 211.6 207.1 507.9 14.1 204.2 238.5 490.1 13.2 196.1 273.5 470.6 12.3 193.1 286.2 463.5 11.9 187.2 312.2 449.2 11.3
6220 DH
44 218.2 209.1 523.6 14.9 210.7 240.8 505.6 14.0 202.5 276.3 485.9 13.0 199.5 289.2 478.8 12.7 193.5 315.4 464.4 12.0
11.2 45 222.1 210.3 533.0 15.4 214.6 242.3 515.0 14.5 206.4 278.0 495.4 13.5 203.5 291.0 488.3 13.1 197.5 317.4 474.0 12.4
48 233.6 213.8 560.7 16.9 225.9 246.4 542.3 15.9 217.6 282.8 522.1 14.8 214.5 296.0 514.9 14.5 208.5 323.0 500.3 13.7
42 223.1 224.1 535.5 15.5 215.3 258.0 516.6 14.5 206.6 295.8 495.8 13.5 203.5 309.6 488.4 13.1 197.2 337.6 473.2 12.4
6230 DH
44 230.0 226.4 552.1 16.4 222.0 260.6 532.9 15.4 213.3 298.9 511.8 14.3 210.1 312.8 504.3 13.9 203.7 341.2 488.9 13.2
11 45 234.0 227.6 561.6 16.9 226.0 262.1 542.5 15.9 217.3 300.7 521.5 14.8 214.1 314.7 513.9 14.4 207.8 343.4 498.7 13.6
48 246.3 231.6 591.0 18.6 238.0 266.7 571.3 17.5 229.0 306.1 549.6 16.3 225.8 320.4 541.9 15.9 219.2 349.7 526.1 15.0
42 229.7 226.3 551.3 10.4 221.6 260.5 531.8 9.7 212.7 298.6 510.5 9.0 209.5 312.5 502.9 8.7 203.1 340.8 487.4 8.2
6240 DH
44 237.9 228.9 571.1 11.1 229.7 263.5 551.3 10.4 220.7 302.2 529.6 9.7 217.4 316.3 521.8 9.4 210.9 345.0 506.0 8.9
11.3 45 242.1 230.2 580.9 11.5 233.7 265.1 561.0 10.8 224.6 304.0 539.1 10.0 221.3 318.2 531.2 9.7 214.7 347.2 515.3 9.2
48 254.7 234.2 611.4 12.7 246.2 269.9 590.9 11.9 236.9 309.8 568.5 11.0 233.5 324.3 560.4 10.8 226.7 353.9 544.1 10.2
Table 8
Notes:
Notes:
Capacity ratings are based on 10ºF range and 0.0001h ft ºF/Btu fouling factor.
* Power input mentioned
Capacity in this page
ratings areshould
based not beon
used10ºF
for cablerange
or fuse selection. MCA and MFA. values
and 0.0001h given in thefouling
ft² . ºF/Btu electrical data
factor.
* pages (17 to 19)input
Power should be referred for the same.
mentioned in this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical data
pages (28 to 32) should be referred for the same.

15
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 60 Hz (IP)
Model Condenser Entering Air Temperature °F
LCWT 95 105 115 118.4 125
EER CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °F TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg
42 249.0 238.4 597.7 12.1 240.5 274.6 577.2 11.4 231.1 315.1 554.7 10.5 227.8 329.8 546.6 10.3 220.9 359.8 530.2 9.7
6260 DH
44 258.0 241.0 619.3 13.0 249.3 277.7 598.4 12.2 239.8 318.6 575.6 11.3 236.4 333.5 567.3 11.0 229.5 364.0 550.7 10.4
11.5 45 262.5 242.3 630.1 13.4 253.8 279.2 609.0 12.6 244.2 320.4 586.0 11.7 240.7 335.4 577.7 11.4 233.7 366.1 560.9 10.8
48 276.4 246.3 663.3 14.7 267.4 283.9 641.7 13.9 257.5 326.0 618.1 12.9 254.0 341.3 609.6 12.6 246.8 372.6 592.4 11.9
42 265.1 263.1 636.2 13.6 255.8 302.9 613.9 12.8 245.6 347.2 589.5 11.8 242.0 363.4 580.8 11.5 234.6 396.3 563.0 10.9
6275 DH
44 274.7 266.2 659.2 14.6 265.2 306.5 636.5 13.7 254.9 351.4 611.7 12.7 251.2 367.8 602.8 12.3 243.7 401.1 584.8 11.7
11.2 45 279.5 267.8 670.7 15.1 269.9 308.3 647.8 14.1 259.5 353.5 622.8 13.1 255.8 370.0 613.8 12.8 248.2 403.5 595.7 12.1
48 294.2 272.6 706.1 16.6 284.4 313.9 682.6 15.6 273.7 360.1 657.0 14.5 269.9 376.9 647.8 14.1 262.2 411.1 629.2 13.4
42 273.4 258.8 656.1 5.9 264.1 298.4 633.9 5.5 253.9 343.1 609.5 5.2 250.3 359.5 600.6 5.0 242.8 393.2 582.8 4.7
6285 TH
44 283.0 261.5 679.2 6.3 273.6 301.7 656.6 5.9 263.2 347.2 631.7 5.5 259.5 364.0 622.7 5.4 251.9 398.3 604.5 5.1
11.6 45 287.7 262.8 690.5 6.4 278.2 303.3 667.6 6.1 267.7 349.2 642.5 5.7 263.9 366.1 633.4 5.5 256.3 400.8 615.0 5.2
48 298.2 265.7 715.6 6.8 288.2 306.8 691.7 6.5 277.3 353.5 665.5 6.0 273.4 370.7 656.1 5.9 265.4 405.9 637.0 5.6
42 282.1 271.7 677.0 6.2 272.4 313.2 653.9 5.9 261.8 359.7 628.4 5.5 258.0 376.7 619.2 5.3 250.2 411.5 600.5 5.0
6290 TH
44 292.1 274.7 701.0 6.6 282.2 316.8 677.4 6.2 271.4 364.1 651.4 5.8 267.5 381.4 642.1 5.7 259.7 416.8 623.2 5.4
11.4 45 297.0 276.2 712.8 6.8 287.0 318.6 688.9 6.4 276.1 366.3 662.7 6.0 272.2 383.7 653.3 5.8 264.3 419.4 634.2 5.5
48 308.0 279.5 739.3 7.2 297.7 322.5 714.4 6.8 286.3 370.9 687.2 6.4 282.2 388.6 677.4 6.2 274.0 424.8 657.6 5.9
42 291.4 278.6 699.4 7.5 281.4 320.8 675.3 7.0 270.4 368.0 648.9 6.5 266.4 385.2 639.4 6.3 258.4 420.2 620.2 5.9
6300 DH
44 301.9 281.8 724.5 8.0 291.6 324.5 699.8 7.5 280.3 372.2 672.7 6.9 276.2 389.6 663.0 6.7 268.0 425.1 643.3 6.3
11.5 45 306.6 283.2 735.9 8.2 296.2 326.1 710.8 7.7 284.8 374.1 683.4 7.2 280.6 391.6 673.5 7.0 272.3 427.2 653.6 6.6
48 318.9 286.8 765.5 8.8 308.1 330.3 739.4 8.3 296.2 379.0 711.0 7.7 292.0 396.7 700.8 7.5 283.4 432.9 680.1 7.1
42 290.7 284.8 697.7 6.6 280.6 328.1 673.5 6.2 269.5 376.5 646.9 5.7 265.5 394.2 637.3 5.6 257.5 430.1 617.9 5.3
6300 TH
44 301.0 288.2 722.4 7.0 290.8 332.1 697.8 6.6 279.5 381.2 670.9 6.1 275.5 399.1 661.2 6.0 267.3 435.6 641.5 5.7
11.3 45 306.1 289.8 734.6 7.2 295.7 334.1 709.8 6.8 284.4 383.5 682.6 6.3 280.3 401.5 672.8 6.2 272.1 438.2 653.0 5.8
48 317.8 293.5 762.6 7.6 307.0 338.4 736.7 7.2 295.2 388.6 708.5 6.7 291.0 406.8 698.4 6.6 282.5 443.9 677.9 6.2
42 299.1 298.2 718.0 6.9 288.7 343.3 692.8 6.5 277.1 393.6 665.1 6.0 273.0 411.8 655.1 5.9 264.5 449.0 634.9 5.6
6310 TH
44 309.8 301.9 743.5 7.3 299.1 347.7 717.9 6.9 287.5 398.6 689.9 6.4 283.3 417.0 679.8 6.3 274.8 454.6 659.5 5.9
11.1 45 315.1 303.7 756.2 7.5 304.3 349.8 730.3 7.1 292.6 401.0 702.1 6.6 288.3 419.6 692.0 6.5 279.8 457.3 671.5 6.1
48 327.2 307.9 785.4 8.0 316.1 354.6 758.7 7.6 304.0 406.4 729.5 7.1 299.6 425.1 719.0 6.9 290.8 463.2 697.9 6.6
42 308.8 305.3 741.1 8.3 298.0 351.4 715.1 7.8 286.1 402.8 686.7 7.2 281.7 421.5 676.1 7.0 273.2 459.7 655.7 6.6
6320 DH
44 320.1 309.0 768.2 8.8 308.9 355.7 741.4 8.3 296.8 407.8 712.2 7.7 292.4 426.8 701.7 7.5 283.5 465.5 680.5 7.1
11.3 45 325.3 310.7 780.6 9.1 314.0 357.7 753.5 8.5 301.6 410.1 723.9 8.0 297.2 429.2 713.2 7.7 288.2 468.1 691.7 7.3
48 338.7 315.2 812.9 9.7 326.9 362.8 784.7 9.2 314.1 416.0 753.9 8.5 309.5 435.4 742.8 8.3 300.2 474.9 720.5 7.9
42 310.6 315.7 745.4 7.3 299.6 363.4 719.1 6.9 287.6 416.5 690.1 6.4 283.2 435.8 679.7 6.3 274.4 475.1 658.5 5.9
6320 TH
44 321.7 319.7 772.0 7.8 310.5 368.1 745.2 7.3 298.3 421.9 715.9 6.9 293.9 441.4 705.3 6.7 285.0 481.2 683.9 6.3
11 45 327.2 321.7 785.3 8.0 315.9 370.4 758.2 7.6 303.6 424.5 728.6 7.1 299.1 444.2 717.9 6.9 290.2 484.1 696.4 6.5
48 340.4 326.4 816.9 8.6 328.6 375.7 788.5 8.1 315.7 430.5 757.6 7.5 311.1 450.4 746.5 7.4 301.7 490.8 724.2 7.0
42 329.0 318.9 789.6 9.3 317.7 367.1 762.5 8.7 305.3 421.0 732.8 8.1 300.9 440.7 722.1 7.9 291.9 480.6 700.5 7.5
6340 DH
44 341.2 322.6 818.9 9.8 329.6 371.5 791.1 9.3 316.9 426.1 760.7 8.7 312.4 445.9 749.7 8.5 303.1 486.5 727.5 8.0
11.4 45 346.9 324.3 832.7 10.1 335.2 373.5 804.4 9.5 322.3 428.4 773.5 8.9 317.7 448.4 762.4 8.7 308.3 489.2 739.9 8.3
48 361.9 328.8 868.5 10.9 349.6 378.7 839.0 10.2 336.2 434.5 806.8 9.6 331.4 454.8 795.3 9.4 321.6 496.2 771.9 8.9
42 331.6 321.6 795.8 8.3 320.1 370.4 768.3 7.8 307.6 424.9 738.1 7.2 303.0 444.7 727.2 7.0 293.8 485.0 705.2 6.5
6345 TH
44 342.7 325.1 822.4 8.8 331.0 374.5 794.5 8.3 318.3 429.6 763.9 7.7 313.7 449.6 752.9 7.5 304.4 490.5 730.6 7.0
11.4 45 348.5 326.9 836.5 9.1 336.8 376.6 808.3 8.5 324.0 432.1 777.6 8.0 319.4 452.3 766.5 7.7 310.0 493.4 744.0 7.3
48 363.0 331.3 871.2 9.8 350.8 381.8 841.9 9.2 337.5 438.1 810.0 8.6 332.7 458.5 798.5 8.4 323.1 500.2 775.3 7.9
42 343.3 339.0 824.0 8.8 331.4 390.3 795.3 8.3 318.3 447.5 763.8 7.7 313.5 468.4 752.5 7.5 304.0 510.9 729.5 7.0
6355 TH
44 354.8 342.7 851.5 9.4 342.6 394.6 822.4 8.8 329.3 452.6 790.4 8.2 324.5 473.7 778.9 8.0 314.8 516.8 755.6 7.5
11.2 45 360.9 344.6 866.1 9.7 348.6 396.9 836.7 9.1 335.2 455.3 804.5 8.5 330.4 476.5 792.9 8.3 320.6 519.9 769.4 7.8
48 376.1 349.5 902.7 10.4 363.3 402.5 872.0 9.8 349.4 461.8 838.5 9.1 344.3 483.4 826.4 8.9 334.2 527.5 802.0 8.4
Table 9
Notes:
Notes:
Capacity ratings are based on 10ºF range and 0.0001h ft ºF/Btu fouling factor.
* Power input mentioned
Capacity in this page
ratings areshould
based not beon
used10ºF
for cablerange
or fuse selection. MCA and MFA. values
and 0.0001h given in thefouling
ft² . ºF/Btu electrical data
factor.
* pages (17 to 19)input
Power should be referred for the same.
mentioned in this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical data
pages (28 to 32) should be referred for the same.

16
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 60 Hz (IP)
Model Condenser Entering Air Temperature °F
LCWT 95 105 115 118.4 125
EER CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °F TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg TR kW USgpm ft.wg
42 345.8 345.6 829.9 10.1 333.7 397.7 801.0 9.5 320.5 455.7 769.3 8.8 315.8 476.8 757.8 8.6 306.1 519.8 734.7 8.2
6360 DH
44 358.7 349.9 861.0 10.7 346.4 402.7 831.3 10.1 332.9 461.5 798.8 9.4 328.0 482.9 787.1 9.2 318.1 526.6 763.5 8.7
11.2 45 364.9 351.9 875.8 11.0 352.3 405.0 845.6 10.4 338.6 464.2 812.6 9.7 333.7 485.8 800.8 9.5 323.7 529.7 776.8 9.0
48 381.1 357.2 914.6 11.8 367.9 411.2 883.1 11.2 353.6 471.4 848.6 10.4 348.4 493.3 836.3 10.2 338.0 538.0 811.3 9.7
42 362.3 350.9 869.5 9.7 350.0 404.2 840.0 9.2 336.5 463.7 807.5 8.5 331.6 485.4 795.7 8.3 321.7 529.6 772.0 7.8
6375 TH
44 374.5 354.5 898.8 10.3 361.9 408.4 868.7 9.7 348.2 468.7 835.7 9.1 343.2 490.6 823.8 8.8 333.2 535.3 799.7 8.4
11.4 45 380.9 356.5 914.3 10.6 368.3 410.7 883.9 10.0 354.4 471.3 850.6 9.4 349.4 493.4 838.6 9.1 339.3 538.4 814.3 8.7
48 397.6 361.4 954.3 11.4 384.4 416.4 922.5 10.7 369.9 477.9 887.8 10.1 364.7 500.3 875.3 9.8 354.2 546.1 850.0 9.3
42 370.4 365.9 889.1 11.3 357.8 421.3 858.6 10.6 343.8 483.0 825.2 10.0 338.8 505.4 813.2 9.7 328.7 551.2 788.8 9.2
6385 DH
44 384.5 370.4 922.8 12.0 371.5 426.4 891.7 11.3 357.3 489.0 857.5 10.6 352.2 511.8 845.2 10.4 341.8 558.2 820.2 9.9
11.2 45 391.4 372.6 939.3 12.4 378.2 428.9 907.6 11.7 363.7 491.9 872.9 10.9 358.5 514.8 860.4 10.7 347.9 561.5 835.1 10.2
48 409.6 378.3 983.2 13.4 395.7 435.5 949.8 12.6 380.6 499.5 913.4 11.8 375.1 522.8 900.3 11.5 364.1 570.3 873.8 11.0
42 378.0 375.6 907.2 10.4 365.0 432.5 876.0 9.8 350.7 496.0 841.7 9.2 345.6 519.1 829.4 9.0 335.1 566.1 804.3 8.5
6390 TH
44 390.7 379.8 937.8 11.0 377.5 437.3 906.0 10.4 363.0 501.5 871.2 9.8 357.7 524.9 858.6 9.5 347.2 572.5 833.2 9.0
11.2 45 397.5 382.0 954.0 11.4 384.1 439.9 921.9 10.7 369.5 504.5 886.8 10.1 364.2 528.0 874.1 9.8 353.5 576.0 848.5 9.3
48 415.3 387.7 996.8 12.2 401.3 446.5 963.2 11.6 386.0 512.1 926.4 10.8 380.5 536.0 913.2 10.6 369.4 584.6 886.5 10.0
42 391.4 399.9 939.3 12.4 377.8 460.2 906.6 11.7 362.8 527.4 870.8 10.9 357.4 551.8 857.8 10.6 346.5 601.5 831.6 10.1
6405 DH
44 406.3 405.2 975.2 13.2 392.4 466.3 941.8 12.4 377.1 534.4 905.1 11.6 371.6 559.2 891.9 11.3 360.5 609.6 865.1 10.8
11 45 413.8 407.8 993.1 13.7 399.6 469.3 959.1 12.8 384.1 537.8 921.8 12.0 378.5 562.8 908.4 11.7 367.2 613.5 881.2 11.1
48 433.9 414.8 1041.3 14.9 418.9 477.3 1005.4 14.0 402.5 547.0 966.1 13.0 396.7 572.3 952.0 12.7 384.8 624.0 923.5 12.0
42 396.4 387.3 951.3 11.3 383.0 446.2 919.3 10.7 368.4 511.9 884.1 10.0 363.1 535.9 871.4 9.8 352.4 584.6 845.6 9.3
6410 TH
44 409.8 391.4 983.6 12.0 396.2 450.9 951.0 11.3 381.3 517.4 915.2 10.6 375.9 541.6 902.2 10.4 365.0 591.0 876.1 9.8
11.3 45 417.0 393.6 1000.7 12.3 403.2 453.5 967.8 11.7 388.2 520.4 931.7 10.9 382.8 544.7 918.6 10.7 371.8 594.3 892.3 10.2
48 436.3 399.5 1047.2 13.3 421.9 460.2 1012.6 12.6 406.1 528.0 974.7 11.8 400.4 552.7 961.1 11.5 389.0 603.0 933.5 11.0
42 412.7 413.5 990.6 12.1 398.7 476.2 957.0 11.4 383.3 546.2 920.0 10.7 377.8 571.6 906.6 10.4 366.5 623.5 879.5 9.9
6425 TH
44 426.8 418.1 1024.4 12.8 412.5 481.6 990.1 12.1 396.8 552.4 952.4 11.3 391.2 578.1 938.8 11.1 379.7 630.7 911.2 10.5
11.1 45 434.3 420.6 1042.3 13.2 419.8 484.4 1007.6 12.5 404.0 555.7 969.6 11.7 398.3 581.6 955.9 11.4 386.7 634.5 928.1 10.9
48 455.0 427.4 1092.1 14.3 439.8 492.2 1055.5 13.5 423.1 564.5 1015.5 12.6 417.1 590.8 1001.1 12.3 405.0 644.5 972.0 11.7
42 431.7 426.7 1036.0 13.1 417.3 491.5 1001.6 12.3 401.5 564.0 963.7 11.6 395.8 590.4 950.0 11.3 384.2 644.3 922.1 10.7
6445 TH
44 446.5 431.3 1071.7 13.9 431.9 496.9 1036.5 13.1 415.8 570.2 997.8 12.3 409.9 597.0 983.9 12.0 398.1 651.5 955.6 11.4
11.2 45 454.4 433.8 1090.6 14.3 439.6 499.7 1055.1 13.5 423.3 573.5 1016.0 12.6 417.5 600.4 1001.9 12.4 405.6 655.3 973.3 11.8
48 476.9 440.7 1144.5 15.6 461.2 507.7 1106.9 14.7 444.0 582.6 1065.7 13.7 437.8 609.9 1050.8 13.4 425.4 665.7 1020.9 12.8
42 447.3 452.7 1073.5 13.9 432.4 521.3 1037.7 13.1 415.9 598.0 998.2 12.3 409.9 626.0 983.8 12.0 397.8 682.9 954.8 11.4
6465 TH
44 462.9 457.8 1110.9 14.8 447.6 527.3 1074.1 13.9 430.7 605.0 1033.7 13.0 424.6 633.2 1019.1 12.7 412.3 690.9 989.5 12.1
11 45 471.1 460.6 1130.6 15.3 455.6 530.5 1093.4 14.4 438.6 608.6 1052.6 13.4 432.4 637.1 1037.8 13.1 420.0 695.2 1007.9 12.5
48 495.0 468.4 1188.0 16.7 478.5 539.5 1148.5 15.7 460.5 619.0 1105.3 14.6 454.1 647.9 1089.7 14.3 440.9 707.0 1058.3 13.6
42 462.5 479.3 1109.9 14.8 447.0 551.9 1072.7 13.9 429.8 632.8 1031.5 13.0 423.6 662.2 1016.6 12.7 411.0 722.2 986.3 12.0
6480 TH
44 478.7 485.1 1148.9 15.7 462.8 558.5 1110.6 14.8 445.2 640.4 1068.5 13.8 438.9 670.2 1053.2 13.5 426.0 731.0 1022.4 12.8
10.8 45 487.3 488.1 1169.4 16.2 471.1 562.0 1130.7 15.3 453.4 644.5 1088.1 14.2 447.0 674.5 1072.7 13.9 434.0 735.8 1041.5 13.2
48 512.6 497.0 1230.3 17.9 495.4 572.2 1189.1 16.8 476.6 656.1 1143.9 15.6 469.8 686.7 1127.6 15.2 456.1 749.0 1094.7 14.4
42 477.1 506.4 1145.1 15.6 461.1 582.9 1106.6 14.7 443.3 668.1 1063.8 13.7 436.8 699.1 1048.3 13.3 423.7 762.1 1016.8 12.7
6495 TH
44 494.1 512.8 1185.8 16.7 477.5 590.3 1146.0 15.6 459.3 676.5 1102.2 14.6 452.6 707.9 1086.3 14.2 439.2 771.9 1054.2 13.5
10.6 45 503.0 516.2 1207.1 17.3 486.2 594.1 1166.9 16.2 467.7 681.0 1122.5 15.1 461.0 712.6 1106.5 14.7 447.5 777.1 1074.0 13.9
48 529.8 526.2 1271.6 19.2 511.9 605.5 1228.6 17.9 492.3 694.1 1181.5 16.6 485.2 726.3 1164.5 16.1 470.9 792.0 1130.2 15.2
42 491.3 534.0 1179.0 16.5 474.7 614.6 1139.3 15.5 456.3 704.1 1095.1 14.4 449.6 736.6 1079.0 14.0 436.0 802.8 1046.3 13.3
6510 TH
44 509.0 541.1 1221.5 17.7 491.8 622.7 1180.3 16.5 472.9 713.4 1134.9 15.4 466.0 746.3 1118.4 15.0 452.1 813.5 1085.0 14.2
10.4 45 518.2 544.8 1243.7 18.3 500.8 626.9 1201.9 17.1 481.6 718.3 1155.9 15.9 474.7 751.5 1139.3 15.5 460.6 819.2 1105.5 14.7
48 546.6 556.0 1311.8 20.4 527.9 639.7 1267.0 19.0 507.5 732.9 1218.0 17.6 500.1 766.8 1200.3 17.1 485.2 835.8 1164.6 16.1
Table 10
Notes:
Notes:
Capacity ratings are based on 10ºF range and 0.0001h ft ºF/Btu fouling factor.
* Power input mentioned
Capacity in this page
ratings areshould
based not beon
used10ºF
for cablerange
or fuse selection. MCA and MFA. values
and 0.0001h given in thefouling
ft² . ºF/Btu electrical data
factor.
* pages (17 to 19)input
Power should be referred for the same.
mentioned in this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical data
pages (28 to 32) should be referred for the same.

17
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 50 Hz (SI)
Model Condenser Entering Air Temperature °C
LCWT 35 40 45 48 51.67
COP CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °C kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
5 253.6 69.9 12.1 39.7 245.8 79.4 11.8 37.4 237.3 90.0 11.3 35.0 231.8 96.9 11.1 33.5 224.7 105.9 10.7 31.6
5075 SH
6 261.6 70.5 12.5 42.1 253.7 80.2 12.1 39.7 245.0 90.9 11.7 37.1 239.4 97.9 11.5 35.6 232.3 107.0 11.1 33.6
3.4 7 269.6 71.1 12.9 44.5 261.5 80.9 12.5 42.0 252.7 91.8 12.1 39.4 247.1 98.9 11.8 37.7 239.8 108.2 11.5 35.7
8 278.0 71.7 13.3 47.2 269.8 81.6 12.9 44.6 260.9 92.7 12.5 41.8 255.2 99.9 12.2 40.1 247.8 109.4 11.9 38.0
5 277.7 80.2 13.3 47.1 268.9 91.0 12.9 44.3 259.4 103.1 12.4 41.4 253.2 110.9 12.1 39.5 245.4 121.0 11.7 37.3
5085 SH
6 286.5 81.0 13.7 50.1 277.6 92.0 13.3 47.1 267.9 104.2 12.8 44.0 261.7 112.1 12.5 42.1 253.7 122.3 12.1 39.7
3.3 7 295.2 81.8 14.1 53.0 286.1 93.0 13.7 49.9 276.3 105.3 13.2 46.7 270.0 113.3 12.9 44.7 261.9 123.6 12.5 42.2
8 304.4 82.7 14.6 56.2 295.2 94.0 14.1 53.0 285.2 106.4 13.6 49.6 278.9 114.5 13.3 47.5 270.7 124.9 12.9 44.9
5 313.9 88.7 15.0 59.7 304.2 100.8 14.6 56.2 293.6 114.1 14.0 52.5 286.8 122.8 13.7 50.2 278.0 134.1 13.3 47.3
5095 SH
6 323.9 89.6 15.5 63.5 314.1 101.8 15.0 59.8 303.3 115.3 14.5 55.9 296.4 124.1 14.2 53.4 287.5 135.5 13.8 50.4
3.4 7 333.8 90.5 16.0 67.4 323.8 102.8 15.5 63.5 312.9 116.5 15.0 59.4 305.9 125.3 14.6 56.8 296.9 136.8 14.2 53.6
8 344.1 91.4 16.5 71.5 334.0 103.9 16.0 67.4 323.0 117.7 15.4 63.1 315.9 126.6 15.1 60.5 306.9 138.2 14.7 57.2
5 386.1 111.7 18.5 17.9 373.3 126.7 17.9 16.8 359.4 143.2 17.2 15.7 350.6 153.8 16.8 15.0 339.2 167.6 16.2 14.1
5115 SH
6 397.0 112.8 19.0 18.8 384.0 128.0 18.4 17.7 369.8 144.7 17.7 16.5 360.8 155.4 17.3 15.8 349.3 169.3 16.7 14.9
3.3 7 409.5 114.2 19.6 20.0 396.3 129.6 19.0 18.8 382.2 146.5 18.3 17.5 373.1 157.3 17.8 16.8 361.6 171.3 17.3 15.8
8 427.4 116.2 20.4 21.6 414.3 131.8 19.8 20.4 400.2 149.0 19.1 19.1 391.2 160.0 18.7 18.3 379.7 174.3 18.2 17.3
5 447.8 121.9 21.4 23.6 433.8 138.4 20.7 22.3 418.5 156.8 20.0 20.8 408.8 168.6 19.6 19.9 396.2 183.9 19.0 18.8
5135 SH
6 461.2 123.1 22.1 25.0 446.8 139.8 21.4 23.5 431.2 158.3 20.6 22.0 421.2 170.2 20.1 21.1 408.4 185.7 19.5 19.9
3.5 7 475.1 124.3 22.7 26.4 460.6 141.3 22.0 24.9 445.0 160.0 21.3 23.4 435.0 172.0 20.8 22.4 422.2 187.6 20.2 21.1
8 494.3 126.0 23.6 28.5 480.0 143.2 23.0 27.0 464.4 162.3 22.2 25.3 454.5 174.5 21.7 24.3 441.8 190.4 21.1 23.0
5 497.9 143.8 23.8 28.9 481.7 163.2 23.0 27.2 464.2 184.6 22.2 25.3 452.9 198.5 21.7 24.2 438.5 216.4 21.0 22.7
5150 SH
6 513.2 145.5 24.5 30.6 496.6 165.1 23.8 28.8 478.7 186.7 22.9 26.8 467.2 200.6 22.3 25.6 452.5 218.7 21.6 24.1
3.3 7 528.2 147.1 25.3 32.4 511.5 166.9 24.5 30.5 493.5 188.8 23.6 28.4 482.0 202.8 23.1 27.2 467.3 221.0 22.4 25.6
8 548.2 149.2 26.2 34.8 531.7 169.4 25.4 32.8 513.8 191.6 24.6 30.7 502.4 205.9 24.0 29.4 487.9 224.3 23.3 27.8
5 526.0 141.3 25.2 27.0 509.7 160.5 24.4 25.4 491.9 182.0 23.5 23.7 480.5 196.0 23.0 22.6 465.8 214.2 22.3 21.3
5155 DH
6 540.7 142.4 25.9 28.4 524.0 161.8 25.1 26.8 505.8 183.6 24.2 25.0 494.2 197.8 23.6 23.9 479.3 216.3 22.9 22.5
3.5 7 557.8 143.6 26.7 30.1 541.1 163.4 25.9 28.5 522.9 185.5 25.0 26.7 511.2 200.0 24.5 25.6 496.3 218.9 23.7 24.1
8 583.6 145.5 27.9 32.8 566.9 165.8 27.1 31.0 548.9 188.5 26.3 29.2 537.3 203.4 25.7 28.1 522.5 222.9 25.0 26.6
5 551.9 151.7 26.4 29.5 534.6 172.3 25.6 27.8 515.7 195.2 24.7 26.0 503.6 210.1 24.1 24.8 488.1 229.4 23.3 23.4
5165 DH
6 567.5 153.0 27.1 31.1 549.8 173.9 26.3 29.3 530.5 197.1 25.4 27.4 518.2 212.1 24.8 26.2 502.4 231.6 24.0 24.7
3.5 7 585.2 154.5 28.0 32.9 567.4 175.7 27.1 31.1 548.1 199.2 26.2 29.2 535.7 214.5 25.6 27.9 520.0 234.3 24.9 26.4
8 611.4 156.7 29.2 35.7 593.7 178.3 28.4 33.8 574.6 202.4 27.5 31.8 562.4 218.1 26.9 30.6 546.7 238.4 26.2 29.0
5 577.3 162.4 27.6 32.1 559.0 184.4 26.7 30.2 539.0 208.8 25.8 28.3 526.2 224.6 25.2 27.0 509.9 245.0 24.4 25.4
5175 DH
6 593.8 163.9 28.4 33.8 575.0 186.2 27.5 31.9 554.7 210.9 26.5 29.8 541.7 226.8 25.9 28.5 525.0 247.3 25.1 26.9
3.4 7 612.0 165.7 29.3 35.7 593.2 188.3 28.4 33.8 572.7 213.2 27.4 31.6 559.8 229.3 26.8 30.3 543.1 250.1 26.0 28.7
8 638.6 168.2 30.5 38.6 619.9 191.2 29.7 36.6 599.7 216.6 28.7 34.4 586.8 233.0 28.1 33.1 570.3 254.1 27.3 31.4
5 611.5 176.9 29.3 35.7 591.7 200.8 28.3 33.6 570.2 227.2 27.3 31.4 556.4 244.2 26.6 30.0 538.7 266.3 25.8 28.2
5185 DH
6 629.3 178.7 30.1 37.6 609.0 202.9 29.1 35.4 587.0 229.5 28.1 33.1 573.0 246.7 27.4 31.7 555.0 269.0 26.5 29.8
3.3 7 648.2 180.7 31.0 39.7 627.8 205.2 30.0 37.4 605.8 232.2 29.0 35.1 591.7 249.5 28.3 33.6 573.7 272.0 27.4 31.7
8 675.3 183.5 32.3 42.8 655.1 208.5 31.3 40.5 633.3 235.9 30.3 38.0 619.4 253.6 29.6 36.5 601.5 276.4 28.8 34.6
5 654.8 179.8 31.3 40.4 634.5 204.3 30.4 38.2 612.3 231.4 29.3 35.8 598.1 248.9 28.6 34.3 579.8 271.7 27.7 32.4
5195 DH
6 674.4 181.5 32.3 42.7 653.6 206.3 31.3 40.3 630.9 233.6 30.2 37.8 616.4 251.3 29.5 36.2 597.8 274.2 28.6 34.2
3.5 7 694.2 183.2 33.2 45.0 673.3 208.3 32.2 42.5 650.6 236.0 31.1 40.0 636.1 253.8 30.4 38.4 617.5 276.9 29.5 36.3
8 722.1 185.6 34.5 48.3 701.3 211.2 33.5 45.8 678.9 239.3 32.5 43.2 664.6 257.4 31.8 41.5 646.2 280.8 30.9 39.5
Table 11
Notes:
Capacity ratings are based
Capacity ratingson 5ºCare
rangebased
and 0.018on
m K/kW
5ºCfouling
range factor. and 0.018 m² . K/kW fouling factor.
** Power input mentioned in this page should
Power input mentioned in this page should not be used for cable or fuse selection.
not be MCA and MFA
used forvalues
cablegivenor
in the electrical
fuse data
selection. MCA and MFA values given in the electrical data
pagespages
(17 to 19) (28
shouldto
be referred for the same
32) should be referred for the same

18
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 50 Hz (SI)
Model Condenser Entering Air Temperature °C
LCWT 35 40 45 48 51.67
COP CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °C kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
5 700.9 199.7 33.5 45.8 678.7 226.8 32.5 43.2 654.6 256.7 31.3 40.4 639.1 276.0 30.6 38.7 619.2 301.1 29.6 36.5
5210 DH
6 722.4 201.8 34.6 48.4 699.7 229.2 33.5 45.6 674.9 259.4 32.3 42.7 659.1 278.9 31.5 40.9 638.8 304.1 30.6 38.7
3.4 7 743.1 203.8 35.5 51.0 720.3 231.6 34.5 48.1 695.5 262.1 33.3 45.1 679.6 281.8 32.5 43.3 659.3 307.2 31.5 40.9
8 771.5 206.6 36.9 54.6 748.8 234.8 35.8 51.7 724.3 265.9 34.6 48.6 708.7 285.8 33.9 46.7 688.7 311.6 32.9 44.3
5 768.0 222.9 36.7 34.6 743.0 252.9 35.5 32.5 715.9 286.0 34.2 30.3 698.7 307.3 33.4 28.9 676.5 334.9 32.4 27.2
5230 DH
6 793.0 225.6 37.9 36.7 767.6 256.0 36.7 34.5 740.1 289.5 35.4 32.2 722.7 311.0 34.6 30.8 700.2 338.9 33.5 29.0
3.3 7 818.2 228.3 39.1 38.9 792.4 259.2 37.9 36.6 764.5 293.0 36.6 34.3 746.8 314.7 35.7 32.8 724.1 342.8 34.6 30.9
8 843.4 231.1 40.3 41.2 817.2 262.3 39.1 38.8 788.9 296.4 37.7 36.3 770.9 318.4 36.9 34.8 747.9 346.7 35.8 32.9
5 828.7 232.5 39.6 39.8 802.6 264.0 38.4 37.5 774.2 298.8 37.0 35.1 756.1 321.2 36.2 33.6 732.8 350.4 35.1 31.6
5250 DH
6 855.8 235.1 40.9 42.3 829.2 267.0 39.7 39.9 800.5 302.2 38.3 37.3 782.1 324.9 37.4 35.8 758.6 354.3 36.3 33.8
3.4 7 883.2 237.7 42.2 44.9 856.2 270.1 41.0 42.3 827.0 305.7 39.6 39.7 808.4 328.6 38.7 38.0 784.5 358.3 37.5 36.0
8 910.7 240.4 43.6 47.5 883.3 273.1 42.3 44.9 853.6 309.1 40.8 42.1 834.8 332.2 39.9 40.4 810.5 362.1 38.8 38.2
5 877.8 254.8 42.0 44.3 849.6 289.1 40.6 41.7 819.0 327.1 39.2 39.0 799.5 351.6 38.2 37.3 774.4 383.3 37.0 35.1
5265 DH
6 906.5 257.8 43.4 47.1 877.9 292.7 42.0 44.4 846.8 331.1 40.5 41.5 827.0 355.9 39.6 39.7 801.6 387.9 38.3 37.4
3.3 7 935.6 260.9 44.8 49.9 906.5 296.3 43.4 47.1 875.0 335.1 41.9 44.1 854.9 360.1 40.9 42.2 829.1 392.5 39.7 39.9
8 964.8 264.1 46.2 52.9 935.2 299.8 44.7 49.9 903.2 339.1 43.2 46.8 882.8 364.4 42.2 44.8 856.6 397.0 41.0 42.4
5 956.7 266.4 45.8 23.9 926.5 302.5 44.3 22.5 893.7 342.3 42.7 21.0 872.8 368.1 41.7 20.1 845.9 401.4 40.5 18.8
5285 DH
6 988.9 269.5 47.3 25.3 958.2 306.1 45.8 23.9 924.9 346.4 44.2 22.4 903.6 372.4 43.2 21.5 876.3 406.1 41.9 20.2
3.4 7 1019.2 272.5 48.8 26.7 987.7 309.4 47.2 25.3 953.6 350.1 45.6 23.7 931.9 376.3 44.6 22.8 904.0 410.2 43.2 21.5
8 1045.7 275.0 50.0 27.8 1013.4 312.3 48.5 26.4 978.5 353.3 46.8 24.8 956.3 379.7 45.7 23.9 927.8 413.7 44.4 22.6
5 946.3 267.1 45.3 20.6 916.7 303.3 43.8 19.5 884.4 343.4 42.3 18.3 863.8 369.3 41.3 17.6 837.3 402.9 40.1 16.6
5285 TH
6 977.1 270.1 46.7 21.7 946.9 306.8 45.3 20.6 914.1 347.4 43.7 19.4 893.2 373.5 42.7 18.6 866.3 407.4 41.4 17.6
3.4 7 1007.7 273.0 48.2 22.9 977.0 310.3 46.7 21.7 943.6 351.2 45.1 20.5 922.3 377.6 44.1 19.7 895.0 411.7 42.8 18.7
8 1035.7 275.8 49.5 23.9 1004.2 313.4 48.0 22.7 970.1 354.7 46.4 21.4 948.3 381.2 45.4 20.6 920.4 415.5 44.0 19.6
5 979.7 281.5 46.9 21.8 948.6 319.7 45.4 20.6 914.8 361.8 43.8 19.4 893.2 389.0 42.7 18.6 865.4 424.3 41.4 17.6
5295 TH
6 1011.5 284.8 48.4 23.0 979.9 323.5 46.9 21.8 945.6 366.1 45.2 20.5 923.7 393.6 44.2 19.7 895.5 429.1 42.8 18.7
3.3 7 1043.4 288.1 49.9 24.2 1011.2 327.3 48.4 23.0 976.2 370.3 46.7 21.7 954.0 398.0 45.6 20.8 925.3 433.8 44.3 19.8
8 1072.9 291.2 51.3 25.4 1039.8 330.7 49.7 24.1 1004.0 374.1 48.0 22.7 981.2 401.9 46.9 21.9 951.9 437.9 45.5 20.8
5 1006.4 288.8 48.1 26.1 974.1 327.7 46.6 24.6 938.9 370.8 44.9 23.1 916.5 398.5 43.8 22.1 887.7 434.5 42.5 20.8
5300 DH
6 1040.2 292.4 49.8 27.6 1007.4 331.9 48.2 26.1 971.7 375.4 46.5 24.5 949.0 403.4 45.4 23.5 919.8 439.7 44.0 22.2
3.4 7 1072.7 295.9 51.3 29.1 1039.0 335.8 49.7 27.5 1002.5 379.7 48.0 25.9 979.2 408.0 46.8 24.9 949.4 444.4 45.4 23.5
8 1101.3 298.9 52.7 30.4 1066.7 339.2 51.0 28.8 1029.3 383.4 49.2 27.1 1005.6 411.8 48.1 26.0 975.1 448.5 46.6 24.7
5 1034.9 290.1 49.5 23.9 1002.9 329.5 48.0 22.7 968.1 373.1 46.3 21.4 945.8 401.3 45.2 20.5 917.2 437.9 43.9 19.5
5310 TH
6 1068.7 293.3 51.1 25.2 1036.2 333.2 49.6 24.0 1000.8 377.3 47.9 22.6 978.2 405.8 46.8 21.7 949.2 442.7 45.4 20.7
3.4 7 1102.8 296.5 52.8 26.6 1069.6 336.9 51.2 25.3 1033.6 381.5 49.4 23.9 1010.7 410.2 48.3 23.0 981.1 447.4 46.9 21.9
8 1134.9 299.5 54.3 27.9 1100.8 340.4 52.7 26.5 1063.9 385.3 50.9 25.0 1040.3 414.2 49.8 24.1 1010.1 451.5 48.3 23.0
5 1081.1 304.5 51.7 29.5 1047.1 345.7 50.1 27.9 1010.1 391.1 48.3 26.2 986.4 420.5 47.2 25.2 956.0 458.6 45.7 23.8
5325 DH
6 1117.5 308.1 53.5 31.1 1082.9 349.8 51.8 29.5 1045.4 395.9 50.0 27.8 1021.5 425.6 48.9 26.8 990.7 464.1 47.4 25.4
3.4 7 1153.5 311.7 55.2 32.8 1118.0 353.9 53.5 31.1 1079.5 400.4 51.6 29.4 1055.0 430.4 50.5 28.3 1023.5 469.1 49.0 26.8
8 1185.6 314.8 56.7 34.4 1149.1 357.5 55.0 32.6 1109.6 404.4 53.1 30.8 1084.4 434.5 51.9 29.6 1052.2 473.5 50.3 28.1
5 1079.7 310.4 51.6 25.7 1045.9 352.4 50.0 24.3 1009.2 398.9 48.3 22.9 985.7 429.0 47.1 22.0 955.4 467.9 45.7 20.9
5325 TH
6 1114.9 314.0 53.3 27.1 1080.7 356.6 51.7 25.7 1043.3 403.6 49.9 24.2 1019.5 433.9 48.8 23.3 988.9 473.2 47.3 22.1
3.3 7 1150.8 317.6 55.0 28.6 1115.8 360.8 53.4 27.1 1077.8 408.3 51.6 25.6 1053.5 438.9 50.4 24.6 1022.4 478.4 48.9 23.4
8 1185.0 321.0 56.7 30.1 1148.9 364.7 55.0 28.5 1109.9 412.6 53.1 26.9 1085.1 443.4 51.9 25.9 1053.2 483.2 50.4 24.6
Table 12
Notes:
Notes:
Capacity ratings are based on 5ºC range and 0.018 m² . K/kW fouling factor.
Capacity
* Power ratings are basedmentioned
input on 5ºC range andin0.018 m page
this K/kW fouling
shouldfactor. not be used for cable or fuse selection. MCA and MFA values given in the electrical data
* Powerpages
input mentioned in this page should not be
(28 to 32) should be referred for used for cable or fusethe
selection.
same MCA and MFA values given in the electrical data
pages (17 to 19) should be referred for the same

19
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 50 Hz (SI)
Model Condenser Entering Air Temperature °C
LCWT 35 40 45 48 51.67
COP CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °C kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
5 1143.9 333.0 54.7 32.4 1107.2 377.8 53.0 30.6 1067.3 427.2 51.1 28.8 1041.9 459.1 49.8 27.7 1009.2 500.4 48.3 26.2
5345 DH
6 1182.0 337.2 56.5 34.2 1144.9 382.6 54.8 32.4 1104.5 432.7 52.8 30.5 1078.8 465.0 51.6 29.3 1045.7 506.7 50.0 27.8
3.3 7 1220.9 341.4 58.4 36.1 1182.7 387.4 56.6 34.2 1141.3 438.1 54.6 32.2 1114.9 470.6 53.3 31.0 1080.9 512.8 51.7 29.4
8 1256.0 345.2 60.1 37.9 1216.7 391.7 58.2 35.9 1174.0 442.8 56.2 33.8 1146.9 475.6 54.9 32.5 1112.0 518.1 53.2 30.9
5 1149.3 334.0 55.0 29.2 1112.6 379.1 53.2 27.6 1072.7 428.8 51.3 25.8 1047.2 460.8 50.1 24.7 1014.5 502.3 48.5 23.3
5345 TH
6 1183.3 337.7 56.6 30.7 1146.0 383.3 54.8 29.0 1105.5 433.5 52.9 27.3 1079.7 465.9 51.6 26.1 1046.5 507.7 50.1 24.7
3.3 7 1219.4 341.6 58.3 32.2 1181.5 387.8 56.5 30.6 1140.5 438.6 54.6 28.8 1114.3 471.2 53.3 27.6 1080.8 513.3 51.7 26.2
8 1256.0 345.6 60.1 33.9 1217.3 392.3 58.2 32.2 1175.5 443.5 56.2 30.3 1148.9 476.4 55.0 29.1 1114.8 518.9 53.3 27.7
5 1208.8 343.3 57.8 31.8 1171.2 389.8 56.0 30.1 1130.2 441.2 54.1 28.3 1104.0 474.4 52.8 27.2 1070.2 517.4 51.2 25.7
5365 TH
6 1244.9 346.9 59.5 33.4 1206.6 394.0 57.7 31.7 1165.0 445.9 55.7 29.8 1138.4 479.4 54.5 28.7 1104.2 522.7 52.8 27.2
3.4 7 1283.1 350.7 61.4 35.1 1244.1 398.4 59.5 33.4 1201.9 450.9 57.5 31.5 1175.0 484.7 56.2 30.3 1140.4 528.4 54.6 28.8
8 1322.2 354.6 63.2 37.0 1282.4 402.9 61.3 35.1 1239.3 455.9 59.3 33.1 1211.9 489.9 58.0 31.9 1176.7 533.9 56.3 30.4
5 1256.7 365.6 60.1 33.9 1217.2 415.0 58.2 32.1 1174.1 469.6 56.2 30.2 1146.6 504.9 54.8 29.0 1111.2 550.5 53.2 27.5
5380 TH
6 1294.5 369.7 61.9 35.7 1254.2 419.7 60.0 33.8 1210.4 474.9 57.9 31.8 1182.5 510.4 56.6 30.6 1146.5 556.5 54.8 29.0
3.3 7 1334.2 374.0 63.8 37.5 1293.3 424.6 61.9 35.6 1248.8 480.4 59.7 33.6 1220.5 516.3 58.4 32.3 1184.1 562.7 56.6 30.7
8 1375.3 378.4 65.8 39.5 1333.4 429.7 63.8 37.5 1288.0 486.0 61.6 35.4 1259.1 522.2 60.2 34.0 1222.0 569.0 58.5 32.4
5 1314.1 374.9 62.9 36.6 1273.8 425.7 60.9 34.7 1229.9 482.0 58.8 32.7 1201.7 518.4 57.5 31.5 1165.3 565.5 55.7 29.9
5395 TH
6 1354.1 378.9 64.8 38.5 1313.0 430.4 62.8 36.5 1268.2 487.2 60.7 34.4 1239.5 523.9 59.3 33.1 1202.6 571.5 57.5 31.5
3.4 7 1395.9 383.1 66.8 40.6 1354.1 435.2 64.8 38.5 1308.6 492.7 62.6 36.3 1279.5 529.7 61.2 35.0 1242.2 577.7 59.4 33.3
8 1439.6 387.4 68.9 42.8 1396.8 440.2 66.8 40.6 1350.3 498.2 64.6 38.3 1320.6 535.6 63.2 36.9 1282.5 584.0 61.3 35.1
5 1360.3 397.0 65.1 38.8 1318.3 450.7 63.1 36.8 1272.4 510.1 60.9 34.6 1242.9 548.5 59.5 33.3 1204.9 598.4 57.6 31.6
5410 TH
6 1402.0 401.4 67.1 40.9 1359.1 455.8 65.0 38.7 1312.2 515.9 62.8 36.5 1282.3 554.6 61.3 35.1 1243.7 604.8 59.5 33.3
3.3 7 1445.5 406.1 69.1 43.1 1401.8 461.1 67.1 40.9 1354.2 521.9 64.8 38.5 1323.8 561.0 63.3 37.0 1284.6 611.6 61.4 35.2
8 1491.2 410.9 71.3 45.6 1446.3 466.7 69.2 43.2 1397.7 528.0 66.9 40.7 1366.6 567.5 65.4 39.1 1326.8 618.4 63.5 37.2
5 1415.6 406.2 67.7 41.6 1372.9 461.3 65.7 39.4 1326.1 522.4 63.4 37.1 1296.1 562.0 62.0 35.7 1257.3 613.4 60.1 34.0
5425 TH
6 1459.6 410.6 69.8 43.9 1415.9 466.4 67.7 41.6 1368.1 528.2 65.4 39.2 1337.5 568.1 64.0 37.7 1298.1 619.8 62.1 35.8
3.3 7 1505.2 415.2 72.0 46.4 1460.6 471.7 69.9 43.9 1412.1 534.1 67.5 41.4 1381.0 574.3 66.1 39.8 1341.1 626.5 64.1 37.9
8 1553.5 420.0 74.3 49.2 1507.8 477.2 72.1 46.5 1458.1 540.2 69.7 43.8 1426.4 580.8 68.2 42.1 1385.6 633.3 66.3 40.0
5 1496.7 431.8 71.6 41.7 1449.2 490.1 69.3 39.3 1397.6 554.6 66.9 36.8 1364.6 596.2 65.3 35.2 1322.3 650.3 63.2 33.2
5455 TH
6 1549.0 437.4 74.1 44.4 1500.8 496.6 71.8 41.9 1448.6 561.8 69.3 39.3 1415.2 603.9 67.7 37.6 1372.4 658.4 65.6 35.5
3.3 7 1601.5 443.0 76.6 47.2 1552.1 502.9 74.2 44.6 1498.5 568.9 71.7 41.8 1464.4 611.3 70.0 40.1 1420.6 666.1 68.0 37.9
8 1647.2 447.9 78.8 49.7 1596.4 508.4 76.4 46.9 1541.5 574.8 73.7 44.0 1506.6 617.5 72.1 42.2 1461.8 672.6 69.9 39.9
5 1566.8 450.9 74.9 45.4 1458.5 504.4 69.8 39.8 1463.7 579.1 70.0 40.0 1429.4 622.6 68.4 38.3 1385.3 679.0 66.3 36.2
5475 TH
6 1621.3 456.6 77.6 48.3 1571.3 518.4 75.2 45.6 1517.0 586.6 72.6 42.7 1482.3 630.6 70.9 41.0 1437.7 687.5 68.8 38.7
3.4 7 1677.2 462.4 80.2 51.4 1625.8 525.1 77.8 48.5 1570.1 594.0 75.1 45.5 1534.6 638.4 73.4 43.7 1489.0 695.8 71.2 41.3
8 1726.2 467.6 82.6 54.2 1673.4 530.9 80.0 51.2 1616.2 600.4 77.3 48.0 1579.8 645.0 75.6 46.0 1533.1 702.8 73.3 43.6
5 1628.0 479.7 77.9 48.7 1576.0 544.2 75.4 45.8 1519.5 615.4 72.7 42.9 1483.4 661.5 71.0 41.0 1437.1 721.1 68.7 38.7
5495 TH
6 1684.3 485.9 80.6 51.8 1631.7 551.5 78.0 48.9 1574.6 623.7 75.3 45.8 1538.1 670.3 73.6 43.8 1491.3 730.6 71.3 41.4
3.3 7 1742.9 492.5 83.4 55.2 1688.9 558.9 80.8 52.1 1630.3 632.0 78.0 48.8 1593.0 679.1 76.2 46.8 1545.0 739.9 73.9 44.2
8 1795.0 498.3 85.9 58.3 1739.4 565.5 83.2 55.0 1679.1 639.2 80.3 51.5 1640.8 686.6 78.5 49.4 1591.5 747.9 76.1 46.7
5 1721.9 513.1 82.4 53.3 1665.8 581.9 79.7 50.1 1604.8 657.6 76.8 46.7 1565.9 706.4 74.9 44.6 1515.8 769.5 72.5 41.9
5520 TH
6 1775.9 519.5 84.9 56.5 1718.9 589.3 82.2 53.1 1657.1 665.9 79.3 49.6 1617.6 715.3 77.4 47.4 1567.0 779.1 75.0 44.6
3.3 7 1834.3 526.5 87.7 60.1 1776.6 597.2 85.0 56.6 1714.0 674.9 82.0 52.9 1674.1 724.9 80.1 50.6 1622.9 789.4 77.6 47.7
8 1894.0 533.6 90.6 63.9 1834.8 605.3 87.8 60.1 1770.6 683.8 84.7 56.2 1729.8 734.3 82.7 53.8 1677.4 799.4 80.2 50.8
Table 13
Notes:
Notes:
Capacity ratings are based on 5ºC range and 0.018 m² . K/kW fouling factor.
Capacity ratings are based on 5ºC range and 0.018 m K/kW fouling factor.
** PowerPower input
input mentioned mentioned
in this inused
page should not be thisfor page should
cable or fuse selection.not beMFA
MCA and used
valuesfor
givencable or fuse
in the electrical data selection. MCA and MFA values given in the electrical data
pagespages (28betoreferred
(17 to 19) should 32)forshould
the same be referred for the same

20
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 60 Hz (SI)
Model Condenser Entering Air Temperature °C
LCWT 35 40 45 48 51.67
COP CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °C kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
5 297.0 86.3 14.2 53.6 287.6 97.9 13.8 50.4 277.4 110.9 13.3 47.0 270.9 119.3 13.0 44.9 262.3 130.2 12.5 42.3
6090 SH
6 306.4 87.1 14.7 57.0 296.9 98.9 14.2 53.6 286.5 112.1 13.7 50.1 279.9 120.7 13.4 47.9 271.4 131.8 13.0 45.1
3.2 7 315.7 87.9 15.1 60.4 306.1 99.9 14.6 56.9 295.6 113.3 14.1 53.1 288.8 122.0 13.8 50.8 280.2 133.4 13.4 48.0
8 325.5 88.7 15.6 64.1 315.7 100.9 15.1 60.4 305.1 114.5 14.6 56.5 298.3 123.4 14.3 54.1 289.5 135.0 13.8 51.1
5 336.5 100.5 16.1 16.1 325.3 114.0 15.6 15.1 313.1 128.9 15.0 14.1 305.3 138.5 14.6 13.5 295.2 150.9 14.1 12.6
6100 SH
6 346.8 101.6 16.6 17.0 335.4 115.3 16.0 16.0 323.1 130.3 15.5 14.9 315.1 140.0 15.1 14.3 305.0 152.6 14.6 13.4
3.2 7 356.9 102.7 17.1 18.0 345.5 116.5 16.5 16.9 333.0 131.8 15.9 15.8 325.0 141.6 15.5 15.1 314.8 154.2 15.1 14.2
8 367.9 103.9 17.6 19.0 356.3 117.9 17.0 17.9 343.8 133.3 16.4 16.8 335.9 143.2 16.1 16.0 325.7 156.0 15.6 15.2
5 397.3 112.5 19.0 18.9 384.4 127.7 18.4 17.7 370.4 144.5 17.7 16.6 361.4 155.3 17.3 15.8 350.0 169.3 16.7 14.9
6120 SH
6 408.6 113.6 19.5 19.9 395.5 128.9 18.9 18.7 381.2 145.8 18.2 17.5 372.1 156.7 17.8 16.7 360.4 170.9 17.2 15.7
3.3 7 421.4 114.7 20.2 21.1 408.2 130.2 19.5 19.8 393.8 147.4 18.8 18.6 384.7 158.5 18.4 17.8 372.9 172.9 17.8 16.8
8 439.6 116.4 21.0 22.8 426.4 132.2 20.4 21.5 412.1 149.7 19.7 20.2 403.0 161.0 19.3 19.4 391.3 175.8 18.7 18.3
5 459.7 130.9 22.0 24.8 444.9 148.6 21.3 23.3 428.8 168.1 20.5 21.8 418.5 180.7 20.0 20.8 405.4 197.1 19.4 19.6
6140 SH
6 473.4 132.2 22.6 26.3 458.3 150.1 21.9 24.7 441.9 169.8 21.1 23.0 431.4 182.5 20.6 22.0 417.9 199.0 20.0 20.7
3.3 7 487.6 133.5 23.3 27.8 472.4 151.6 22.6 26.2 455.9 171.5 21.8 24.5 445.4 184.4 21.3 23.4 431.9 201.1 20.7 22.1
8 507.1 135.3 24.3 30.0 491.9 153.7 23.5 28.3 475.5 174.0 22.7 26.5 465.1 187.1 22.2 25.4 451.7 204.1 21.6 24.0
5 524.6 150.9 25.1 32.0 507.8 171.3 24.3 30.0 489.6 193.8 23.4 28.0 478.0 208.3 22.9 26.8 463.0 227.1 22.1 25.2
6160 SH
6 541.1 152.5 25.9 33.9 523.9 173.0 25.1 31.9 505.2 195.8 24.2 29.7 493.3 210.4 23.6 28.4 478.0 229.5 22.9 26.8
3.3 7 556.7 153.9 26.6 35.8 539.4 174.7 25.8 33.7 520.6 197.7 24.9 31.5 508.6 212.6 24.3 30.1 493.3 231.9 23.6 28.4
8 577.2 155.9 27.6 38.4 560.0 177.0 26.8 36.2 541.3 200.4 25.9 34.0 529.5 215.6 25.3 32.5 514.2 235.2 24.6 30.8
5 587.1 170.8 28.1 39.7 568.5 193.8 27.2 37.3 548.3 219.2 26.2 34.8 535.3 235.6 25.6 33.2 518.7 256.8 24.8 31.3
6175 SH
6 606.5 172.6 29.0 42.3 587.4 195.9 28.1 39.7 566.6 221.6 27.1 37.1 553.3 238.1 26.5 35.4 536.2 259.6 25.6 33.3
3.2 7 623.6 174.3 29.8 44.6 604.3 197.8 28.9 42.0 583.2 223.7 27.9 39.2 570.0 240.5 27.3 37.5 552.9 262.2 26.4 35.4
8 645.1 176.3 30.9 47.6 625.9 200.1 29.9 44.9 605.1 226.5 28.9 42.1 591.8 243.6 28.3 40.3 574.9 265.8 27.5 38.1
5 618.5 174.7 29.6 36.4 598.9 198.4 28.6 34.4 577.6 224.8 27.6 32.1 563.9 241.9 27.0 30.7 546.3 264.3 26.1 29.0
6185 DH
6 636.6 176.2 30.5 38.4 616.6 200.3 29.5 36.2 594.7 227.0 28.4 33.9 580.8 244.5 27.8 32.5 562.8 267.2 26.9 30.6
3.3 7 655.7 177.9 31.4 40.5 635.5 202.3 30.4 38.3 613.7 229.5 29.4 35.9 599.7 247.3 28.7 34.4 581.7 270.5 27.8 32.6
8 682.9 180.3 32.7 43.7 663.0 205.2 31.7 41.4 641.3 233.2 30.7 38.9 627.5 251.5 30.0 37.4 609.7 275.4 29.2 35.5
5 648.1 187.9 31.0 39.7 627.1 213.2 30.0 37.4 604.3 241.3 28.9 34.9 589.6 259.5 28.2 33.4 570.7 283.1 27.3 31.4
6195 DH
6 667.3 189.7 31.9 41.9 645.9 215.4 30.9 39.4 622.6 243.9 29.8 36.9 607.7 262.3 29.1 35.3 588.5 286.2 28.1 33.3
3.2 7 686.9 191.6 32.9 44.1 665.5 217.7 31.8 41.6 642.2 246.6 30.7 39.0 627.3 265.3 30.0 37.4 608.2 289.6 29.1 35.3
8 714.6 194.3 34.2 47.4 693.4 221.0 33.2 44.9 670.4 250.5 32.1 42.2 655.8 269.7 31.4 40.5 637.1 294.6 30.5 38.5
5 676.8 201.4 32.4 43.0 654.6 228.4 31.3 40.4 630.1 258.3 30.1 37.7 614.5 277.5 29.4 36.0 594.3 302.5 28.4 33.9
6205 DH
6 697.3 203.6 33.4 45.3 674.5 231.0 32.3 42.7 649.6 261.2 31.1 39.9 633.7 280.6 30.3 38.1 613.3 305.7 29.3 35.9
3.2 7 717.5 205.8 34.3 47.8 694.6 233.6 33.2 45.0 669.9 264.1 32.0 42.1 654.1 283.7 31.3 40.4 633.9 309.1 30.3 38.1
8 745.5 208.8 35.7 51.3 723.0 237.1 34.6 48.5 698.7 268.2 33.4 45.5 683.0 288.2 32.7 43.7 663.6 314.1 31.7 41.4
5 726.9 205.5 34.8 48.9 704.2 233.4 33.7 46.2 679.4 264.2 32.5 43.2 663.4 284.2 31.7 41.4 642.9 310.0 30.8 39.1
6220 DH
6 749.6 207.5 35.9 51.8 726.3 235.7 34.7 48.9 700.9 266.8 33.5 45.8 684.6 286.9 32.7 43.9 663.7 313.0 31.7 41.4
3.3 7 770.9 209.4 36.9 54.5 747.6 237.9 35.8 51.5 722.1 269.4 34.5 48.3 705.9 289.7 33.8 46.4 685.0 316.1 32.8 43.9
8 799.7 211.9 38.3 58.4 776.5 240.8 37.1 55.3 751.5 272.8 35.9 52.0 735.5 293.5 35.2 50.0 715.0 320.4 34.2 47.5
5 765.6 222.4 36.6 53.8 741.6 252.5 35.5 50.8 715.3 285.8 34.2 47.5 698.5 307.2 33.4 45.5 676.8 335.1 32.4 42.9
6230 DH
6 790.2 224.6 37.8 57.1 765.4 255.0 36.6 53.8 738.4 288.6 35.3 50.4 721.1 310.3 34.5 48.2 698.9 338.5 33.4 45.5
3.2 7 812.3 226.7 38.9 60.1 787.4 257.4 37.7 56.7 760.3 291.4 36.4 53.2 742.9 313.3 35.5 50.9 720.7 341.8 34.5 48.2
8 841.5 229.3 40.3 64.3 816.7 260.5 39.1 60.7 789.9 295.1 37.8 57.1 772.8 317.4 37.0 54.8 750.8 346.5 35.9 51.9
5 789.6 224.6 37.8 36.4 764.5 255.0 36.6 34.3 737.2 288.5 35.3 32.0 719.8 310.1 34.4 30.6 697.3 338.2 33.4 28.8
6240 DH
6 815.4 227.0 39.0 38.7 789.9 257.7 37.8 36.4 762.2 291.6 36.5 34.1 744.5 313.5 35.6 32.6 721.8 342.0 34.5 30.7
3.3 7 841.5 229.3 40.3 41.0 815.5 260.4 39.0 38.7 787.4 294.7 37.7 36.2 769.4 317.0 36.8 34.7 746.4 345.8 35.7 32.7
8 867.6 231.7 41.5 43.4 841.2 263.1 40.2 41.0 812.6 297.9 38.9 38.4 794.4 320.5 38.0 36.8 770.9 349.7 36.9 34.8
Table 14
Notes:Notes:

Capacity ratings are based on 5ºC range and 0.018 m K/kW fouling factor. . K/kW fouling factor.
Capacity
* Power input mentionedratings
in this pageare
shouldbased
not be usedon 5ºC
for cable range
or fuse selection.and 0.018
MCA and m²given
MFA values in the electrical data
*pagesPower input
(17 to 19) should mentioned
be referred for the samein this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical data
pages (28 to 32) should be referred for the same

21
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 60 Hz (SI)
Model Condenser Entering Air Temperature °C
LCWT 35 40 45 48 51.67
COP CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °C kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
5 855.6 236.7 40.9 42.3 829.2 268.9 39.7 39.9 800.4 304.4 38.3 37.3 782.0 327.4 37.4 35.7 758.3 357.3 36.3 33.7
6260 DH
6 883.7 239.1 42.3 44.9 856.8 271.6 41.0 42.4 827.6 307.5 39.6 39.7 809.0 330.8 38.7 38.1 785.0 361.0 37.5 36.0
3.4 7 912.2 241.4 43.6 47.6 884.9 274.3 42.3 45.0 855.2 310.6 40.9 42.2 836.3 334.1 40.0 40.5 811.9 364.7 38.8 38.3
8 940.7 243.8 45.0 50.4 912.9 277.0 43.7 47.7 882.8 313.7 42.2 44.8 863.6 337.5 41.3 43.0 838.9 368.5 40.1 40.8
5 910.4 261.0 43.5 47.5 881.7 296.3 42.2 44.7 850.5 335.4 40.7 41.8 830.5 360.6 39.7 40.0 804.9 393.2 38.5 37.7
6275 DH
6 940.2 263.8 45.0 50.4 910.7 299.5 43.6 47.5 879.4 339.0 42.1 44.5 859.2 364.5 41.1 42.6 833.2 397.5 39.9 40.2
3.3 7 970.6 266.7 46.4 53.5 940.9 302.8 45.0 50.5 908.8 342.7 43.5 47.3 888.2 368.4 42.5 45.3 861.9 401.9 41.2 42.9
8 1001.0 269.5 47.9 56.6 970.9 306.0 46.4 53.5 938.2 346.4 44.9 50.2 917.4 372.4 43.9 48.1 890.6 406.2 42.6 45.6
5 939.4 257.1 44.9 20.3 910.8 292.2 43.6 19.3 879.6 331.3 42.1 18.1 859.5 356.7 41.1 17.4 833.8 389.9 39.9 16.5
6285 TH
6 970.0 259.5 46.4 21.4 940.9 295.0 45.0 20.4 909.1 334.8 43.5 19.2 888.8 360.7 42.5 18.5 862.7 394.6 41.3 17.5
3.4 7 1000.5 261.9 47.9 22.6 970.8 297.9 46.4 21.5 938.4 338.3 44.9 20.3 917.8 364.7 43.9 19.5 891.2 399.2 42.6 18.5
8 1028.2 264.1 49.2 23.7 997.8 300.5 47.7 22.5 964.7 341.5 46.1 21.2 943.6 368.2 45.1 20.5 916.4 403.2 43.8 19.5
5 969.2 269.8 46.4 21.4 939.3 306.5 44.9 20.3 906.7 347.3 43.4 19.1 885.8 373.7 42.4 18.4 858.8 408.2 41.1 17.4
6290 TH
6 1000.8 272.5 47.9 22.6 970.4 309.7 46.4 21.5 937.3 351.1 44.8 20.2 916.1 378.0 43.8 19.5 888.9 413.0 42.5 18.5
3.4 7 1032.4 275.1 49.4 23.8 1001.4 312.9 47.9 22.6 967.8 354.9 46.3 21.4 946.3 382.2 45.3 20.6 918.7 417.7 43.9 19.5
8 1061.5 277.6 50.8 24.9 1029.8 315.8 49.3 23.7 995.4 358.3 47.6 22.4 973.4 386.0 46.6 21.6 945.2 421.9 45.2 20.5
5 1000.7 276.5 47.9 25.8 969.6 314.0 46.4 24.4 935.8 355.5 44.8 22.9 914.2 382.3 43.7 22.0 886.4 417.1 42.4 20.7
6300 DH
6 1034.5 279.4 49.5 27.3 1002.9 317.4 48.0 25.9 968.5 359.3 46.3 24.4 946.6 386.4 45.3 23.4 918.4 421.6 43.9 22.2
3.4 7 1066.9 282.2 51.0 28.8 1034.4 320.5 49.5 27.3 999.2 362.9 47.8 25.8 976.7 390.3 46.7 24.8 947.8 425.8 45.3 23.5
8 1095.4 284.6 52.4 30.1 1062.0 323.2 50.8 28.6 1025.9 366.0 49.1 27.0 1002.9 393.6 48.0 25.9 973.3 429.5 46.6 24.6
5 998.5 282.7 47.8 22.5 967.4 321.0 46.3 21.3 933.3 363.5 44.6 20.1 911.4 391.0 43.6 19.3 883.3 426.6 42.3 18.3
6300 TH
6 1031.1 285.6 49.3 23.8 999.4 324.5 47.8 22.5 965.0 367.6 46.2 21.3 942.9 395.4 45.1 20.4 914.5 431.6 43.7 19.4
3.3 7 1063.8 288.6 50.9 25.0 1031.6 328.0 49.3 23.8 996.6 371.7 47.7 22.4 974.3 399.9 46.6 21.6 945.6 436.5 45.2 20.5
8 1094.2 291.4 52.3 26.3 1061.2 331.3 50.8 24.9 1025.5 375.4 49.1 23.5 1002.7 403.9 48.0 22.7 973.5 440.9 46.6 21.6
5 1027.3 295.7 49.1 23.6 994.9 335.7 47.6 22.4 959.4 379.9 45.9 21.0 936.6 408.4 44.8 20.2 907.2 445.4 43.4 19.1
6310 TH
6 1060.9 299.0 50.7 24.9 1028.0 339.6 49.2 23.6 992.1 384.3 47.5 22.3 969.1 413.2 46.4 21.4 939.6 450.5 44.9 20.3
3.3 7 1094.7 302.3 52.4 26.3 1061.2 343.5 50.8 24.9 1024.9 388.7 49.0 23.5 1001.7 417.8 47.9 22.6 972.0 455.5 46.5 21.5
8 1126.4 305.5 53.9 27.6 1092.1 347.0 52.2 26.2 1055.1 392.7 50.5 24.7 1031.5 422.0 49.3 23.8 1001.3 460.0 47.9 22.6
5 1060.3 302.9 50.7 28.5 1026.7 343.7 49.1 27.0 990.2 388.9 47.4 25.4 966.8 418.1 46.2 24.3 936.9 456.0 44.8 23.0
6320 DH
6 1096.0 306.2 52.4 30.1 1061.9 347.6 50.8 28.6 1024.8 393.4 49.0 26.9 1001.2 422.9 47.9 25.9 970.8 461.3 46.4 24.5
3.3 7 1131.0 309.5 54.1 31.8 1095.9 351.4 52.4 30.1 1057.9 397.6 50.6 28.4 1033.7 427.5 49.4 27.3 1002.6 466.3 48.0 25.9
8 1162.1 312.4 55.6 33.2 1126.1 354.7 53.9 31.5 1087.1 401.4 52.0 29.7 1062.2 431.6 50.8 28.6 1030.3 470.8 49.3 27.2
5 1066.3 313.1 51.0 25.1 1032.4 355.4 49.4 23.8 995.3 402.0 47.6 22.4 971.6 432.1 46.5 21.5 940.9 471.2 45.0 20.4
6320 TH
6 1101.1 316.6 52.7 26.5 1066.7 359.5 51.0 25.2 1029.2 406.7 49.2 23.7 1005.2 437.2 48.1 22.8 974.3 476.7 46.6 21.6
3.2 7 1136.5 320.2 54.4 28.0 1101.4 363.6 52.7 26.6 1063.3 411.4 50.9 25.0 1039.0 442.2 49.7 24.1 1007.8 482.1 48.2 22.9
8 1170.0 323.6 56.0 29.5 1134.0 367.5 54.2 27.9 1095.1 415.8 52.4 26.3 1070.2 446.9 51.2 25.3 1038.4 487.1 49.7 24.0
5 1129.4 316.4 54.0 31.7 1094.3 359.3 52.3 30.1 1056.2 406.6 50.5 28.3 1031.8 437.2 49.4 27.2 1000.5 476.9 47.9 25.8
6340 DH
6 1167.2 319.7 55.8 33.5 1131.8 363.1 54.1 31.8 1093.2 411.0 52.3 30.0 1068.5 442.0 51.1 28.9 1036.8 482.2 49.6 27.4
3.4 7 1205.5 323.1 57.7 35.4 1169.1 366.9 55.9 33.6 1129.5 415.3 54.0 31.7 1104.2 446.7 52.8 30.5 1071.7 487.3 51.3 29.0
8 1240.1 326.0 59.3 37.1 1202.5 370.2 57.5 35.2 1161.8 419.2 55.6 33.2 1135.8 450.8 54.3 32.0 1102.5 491.9 52.7 30.4
5 1141.1 319.4 54.6 28.8 1105.7 362.7 52.9 27.3 1067.1 410.6 51.0 25.6 1042.4 441.6 49.9 24.5 1010.5 481.7 48.3 23.1
6345 TH
6 1175.0 322.4 56.2 30.3 1139.0 366.2 54.5 28.7 1099.9 414.6 52.6 27.0 1074.8 445.9 51.4 25.9 1042.6 486.4 49.9 24.5
3.3 7 1210.9 325.6 57.9 31.9 1174.5 369.9 56.2 30.3 1134.9 418.8 54.3 28.5 1109.6 450.5 53.1 27.4 1077.0 491.5 51.5 26.0
8 1247.4 328.8 59.7 33.5 1210.2 373.6 57.9 31.8 1169.8 423.1 56.0 30.1 1144.1 455.1 54.7 28.9 1111.1 496.5 53.1 27.5
5 1181.0 336.6 56.5 30.5 1144.2 382.2 54.7 28.9 1104.0 432.5 52.8 27.2 1078.4 465.0 51.6 26.1 1045.3 507.2 50.0 24.6
6355 TH
6 1216.2 339.8 58.2 32.1 1178.7 385.8 56.4 30.5 1138.0 436.7 54.4 28.7 1111.9 469.6 53.2 27.5 1078.3 512.3 51.6 26.1
3.3 7 1253.5 343.2 60.0 33.8 1215.4 389.7 58.1 32.1 1174.0 441.2 56.2 30.2 1147.6 474.6 54.9 29.1 1113.6 517.8 53.3 27.6
8 1291.5 346.6 61.8 35.5 1252.6 393.7 59.9 33.7 1210.3 445.8 57.9 31.8 1183.4 479.5 56.6 30.7 1148.7 523.3 54.9 29.1
Table 15
Notes:Notes:

Capacity ratings are based


Capacity on 5ºC range
ratings areandbased
0.018 m K/kW
on fouling range and 0.018 m² . K/kW fouling factor.
5ºCfactor.
** Power input mentioned in this page should
Power input mentioned in this page should not be used for cable or fuse selection.not
MCA and
beMFA valuesfor
used givencable
in the electrical
or fuse data selection. MCA and MFA values given in the electrical data
pagespages
(17 to 19) should be referred for the same
(28 to 32) should be referred for the same

22
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - 60 Hz (SI)
Model Condenser Entering Air Temperature °C
LCWT 35 40 45 48 51.67
COP CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD CCap PI* WFR WPD
APCY °C kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
5 1186.9 342.8 56.8 34.4 1149.4 389.0 55.0 32.6 1108.7 440.0 53.0 30.7 1082.7 472.8 51.8 29.5 1049.2 515.4 50.2 28.0
6360 DH
6 1226.2 346.5 58.7 36.4 1188.4 393.3 56.8 34.5 1147.3 445.0 54.9 32.5 1121.1 478.3 53.6 31.3 1087.2 521.5 52.0 29.7
3.3 7 1267.1 350.4 60.6 38.5 1228.3 397.7 58.8 36.5 1186.1 450.0 56.7 34.4 1159.2 483.7 55.4 33.1 1124.5 527.5 53.8 31.5
8 1304.6 353.9 62.4 40.6 1264.5 401.7 60.5 38.4 1221.0 454.5 58.4 36.1 1193.3 488.6 57.1 34.7 1157.7 532.9 55.4 33.0
5 1245.4 348.4 59.6 33.4 1207.5 395.8 57.8 31.7 1166.2 448.1 55.8 29.9 1139.7 482.0 54.5 28.7 1105.5 525.9 52.9 27.3
6375 TH
6 1282.9 351.6 61.4 35.1 1244.3 399.4 59.5 33.4 1202.3 452.3 57.5 31.5 1175.3 486.5 56.2 30.3 1140.6 530.9 54.6 28.8
3.3 7 1322.5 355.0 63.3 37.0 1283.2 403.3 61.4 35.1 1240.0 456.7 59.3 33.2 1213.2 491.4 58.0 32.0 1178.1 536.3 56.4 30.4
8 1363.2 358.4 65.2 38.9 1323.1 407.2 63.3 37.0 1279.5 461.3 61.2 35.0 1251.6 496.3 59.9 33.7 1215.8 541.7 58.2 32.1
5 1271.4 363.0 60.8 38.7 1231.9 412.1 58.9 36.7 1188.9 466.3 56.9 34.5 1161.4 501.3 55.6 33.2 1126.0 546.7 53.9 31.5
6385 DH
6 1312.8 366.8 62.8 41.0 1273.1 416.5 60.9 38.8 1229.9 471.4 58.8 36.6 1202.3 506.8 57.5 35.2 1166.7 552.8 55.8 33.4
3.3 7 1357.7 370.9 64.9 43.6 1317.0 421.1 63.0 41.3 1272.7 476.6 60.9 38.8 1244.3 512.5 59.5 37.3 1207.8 559.1 57.8 35.5
8 1399.8 374.6 67.0 46.2 1357.7 425.4 64.9 43.6 1311.9 481.5 62.8 41.0 1282.6 517.7 61.4 39.4 1245.1 564.8 59.6 37.4
5 1298.6 372.7 62.1 35.9 1258.7 423.3 60.2 34.0 1215.2 479.1 58.1 32.1 1187.2 515.2 56.8 30.8 1151.3 562.0 55.1 29.2
6390 TH
6 1338.0 376.4 64.0 37.7 1297.3 427.4 62.1 35.8 1253.0 483.9 59.9 33.8 1224.6 520.3 58.6 32.5 1188.0 567.6 56.8 30.9
3.3 7 1379.4 380.2 66.0 39.7 1337.9 431.8 64.0 37.7 1292.9 488.9 61.8 35.6 1264.1 525.7 60.5 34.3 1227.1 573.5 58.7 32.6
8 1422.4 384.2 68.0 41.9 1380.0 436.3 66.0 39.8 1333.9 494.0 63.8 37.5 1304.5 531.3 62.4 36.1 1266.7 579.6 60.6 34.4
5 1343.3 396.5 64.3 42.8 1300.9 450.0 62.2 40.3 1254.7 509.0 60.0 37.9 1225.1 547.0 58.6 36.3 1187.1 596.3 56.8 34.4
6405 DH
6 1385.9 400.9 66.3 45.3 1343.5 455.0 64.3 42.8 1297.2 514.8 62.1 40.1 1267.6 553.3 60.6 38.5 1229.5 603.3 58.8 36.6
3.2 7 1434.1 405.7 68.6 48.4 1390.6 460.5 66.5 45.6 1343.1 521.0 64.2 42.8 1312.8 560.0 62.8 41.0 1273.7 610.6 60.9 38.9
8 1480.3 410.3 70.8 51.6 1435.1 465.7 68.6 48.5 1386.0 526.8 66.3 45.3 1354.6 566.2 64.8 43.4 1314.3 617.4 62.9 41.1
5 1360.6 384.3 65.1 38.8 1319.8 436.6 63.1 36.8 1275.2 494.5 61.0 34.8 1246.6 531.9 59.6 33.5 1209.6 580.5 57.9 31.8
6410 TH
6 1402.4 388.0 67.1 40.9 1360.8 440.8 65.1 38.8 1315.3 499.3 62.9 36.6 1286.1 537.0 61.5 35.3 1248.6 586.0 59.7 33.6
3.3 7 1446.1 391.8 69.2 43.2 1403.6 445.2 67.1 41.0 1357.4 504.2 64.9 38.7 1327.8 542.4 63.5 37.2 1289.7 591.8 61.7 35.4
8 1491.9 395.8 71.4 45.7 1448.4 449.7 69.3 43.3 1401.1 509.3 67.0 40.8 1370.9 547.9 65.6 39.3 1332.0 597.9 63.7 37.4
5 1415.7 410.0 67.7 41.6 1373.0 465.8 65.7 39.4 1326.2 527.4 63.4 37.2 1296.2 567.2 62.0 35.7 1257.4 618.8 60.1 34.0
6425 TH
6 1459.8 414.2 69.8 43.9 1416.0 470.5 67.7 41.6 1368.2 532.7 65.4 39.2 1337.6 572.9 64.0 37.7 1298.1 625.0 62.1 35.8
3.3 7 1505.4 418.5 72.0 46.4 1460.8 475.4 69.9 43.9 1412.2 538.2 67.5 41.4 1381.1 578.9 66.1 39.8 1341.0 631.6 64.1 37.9
8 1553.8 423.1 74.3 49.2 1508.0 480.5 72.1 46.6 1458.2 544.1 69.8 43.8 1426.4 585.1 68.2 42.1 1385.4 638.4 66.3 40.0
5 1479.0 423.1 70.7 44.9 1435.5 480.8 68.7 42.6 1387.8 544.5 66.4 40.2 1357.1 585.8 64.9 38.6 1317.4 639.3 63.0 36.7
6445 TH
6 1525.9 427.3 73.0 47.6 1481.2 485.5 70.9 45.1 1432.3 549.9 68.5 42.4 1400.9 591.6 67.0 40.8 1360.4 645.6 65.1 38.8
3.3 7 1574.2 431.6 75.3 50.5 1528.5 490.4 73.1 47.7 1478.7 555.5 70.7 44.9 1446.7 597.6 69.2 43.2 1405.6 652.3 67.2 41.1
8 1625.7 436.2 77.8 53.7 1578.7 495.6 75.5 50.8 1527.6 561.4 73.1 47.7 1494.9 604.0 71.5 45.8 1452.8 659.3 69.5 43.5
5 1531.2 448.6 73.2 47.9 1486.1 509.6 71.1 45.3 1436.5 577.1 68.7 42.7 1404.5 620.7 67.2 41.0 1363.2 677.3 65.2 38.9
6465 TH
6 1580.5 453.3 75.6 50.9 1534.0 515.0 73.4 48.1 1483.1 583.1 70.9 45.2 1450.3 627.2 69.4 43.4 1408.1 684.4 67.4 41.2
3.2 7 1631.0 458.1 78.0 54.1 1583.3 520.4 75.7 51.0 1531.3 589.3 73.2 47.9 1498.0 633.9 71.7 46.0 1455.0 691.8 69.6 43.6
8 1685.0 463.2 80.6 57.8 1636.0 526.2 78.3 54.4 1582.6 595.9 75.7 51.0 1548.4 641.0 74.1 48.9 1504.4 699.6 72.0 46.4
5 1581.4 474.7 75.6 50.9 1534.8 539.2 73.4 48.1 1483.4 610.3 71.0 45.2 1450.3 656.3 69.4 43.4 1407.3 715.8 67.3 41.1
6480 TH
6 1633.3 480.0 78.1 54.3 1585.1 545.1 75.8 51.1 1532.1 617.0 73.3 48.0 1498.1 663.4 71.7 46.0 1454.0 723.7 69.6 43.6
3.2 7 1686.0 485.3 80.6 57.9 1636.4 551.1 78.3 54.5 1582.3 623.8 75.7 51.0 1547.6 670.8 74.0 48.9 1502.8 731.9 71.9 46.3
8 1742.6 491.0 83.4 62.1 1691.6 557.5 80.9 58.3 1635.9 631.2 78.3 54.4 1600.3 678.8 76.5 52.1 1554.3 740.6 74.3 49.3
5 1629.7 501.1 78.0 54.0 1581.7 569.2 75.7 50.9 1528.7 644.1 73.1 47.8 1494.4 692.4 71.5 45.8 1449.8 755.0 69.3 43.4
6495 TH
6 1684.3 507.1 80.6 57.8 1634.4 575.8 78.2 54.3 1579.6 651.5 75.6 50.8 1544.2 700.3 73.9 48.7 1498.5 763.7 71.7 46.0
3.1 7 1739.3 513.0 83.2 61.8 1687.9 582.4 80.7 58.0 1631.7 659.0 78.0 54.1 1595.6 708.5 76.3 51.8 1548.9 772.7 74.1 48.9
8 1798.5 519.3 86.0 66.5 1745.5 589.5 83.5 62.3 1687.6 667.1 80.7 58.0 1650.5 717.3 79.0 55.4 1602.7 782.3 76.7 52.3
5 1675.9 528.0 80.2 57.2 1626.8 599.6 77.8 53.8 1572.2 678.4 75.2 50.4 1536.8 729.1 73.5 48.2 1490.8 794.8 71.3 45.6
6510 TH
6 1733.5 534.7 82.9 61.4 1682.0 607.0 80.5 57.6 1625.4 686.6 77.7 53.7 1588.8 737.9 76.0 51.4 1541.4 804.4 73.7 48.5
3.0 7 1790.8 541.2 85.7 65.9 1737.7 614.3 83.1 61.7 1679.4 694.8 80.3 57.4 1642.0 746.8 78.5 54.8 1593.6 814.2 76.2 51.7
8 1852.6 548.2 88.6 71.1 1797.7 622.2 86.0 66.4 1737.7 703.8 83.1 61.7 1699.2 756.5 81.3 58.8 1649.6 824.9 78.9 55.3
Table 16
Notes:Notes:

Capacity ratings are based


Capacity on 5ºC range
ratings areandbased
0.018 m K/kW
on fouling
5ºCfactor.
range and 0.018 m² . K/kW fouling factor.
* Power input mentioned in this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical data
*pagesPower input mentioned in this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical data
(17 to 19) should be referred for the same
pages (28 to 32) should be referred for the same

23
SKM Compact Screw Chillers
APCY-H Series - R-134a
CAPACITY RATINGS - AHRI
AHRI Capacity rating
Capacity rating and Part Load Performance - 50 Hz high efficiency
Capacity rating and Part Load Performance 50- Hz high efficiency

AHRI
Model
Capacity
Nominalrating
Compressor PI (2) Total Power
FULL LOAD Model
Nominal
Compressor PI(2)
Total Power
FULL LOAD
(1) (2)
Capacity Capacity (1) Input(2)
Capacity rating and Part Load PerformanceInput
50- Hz high efficiency IPLV IPLV
APCY TR kW kW EER COP APCY TR kW kW EER COP
5075 SH 76.2
Nominal 71 Total78.5
Power 11.6 3.4 14.0 5295 TH 295.2
Nominal 287.6 311.6
Total Power 11.4 3.3 14.2
Model Compressor PI(2) FULL LOAD Model Compressor PI(2) FULL LOAD
5085 SH Capacity
83.5 (1) 81.7 89.2(2)
Input 11.2 3.3 14.0
IPLV 5300 DH 303.5 (1)
Capacity 295.3 319.3(2)
Input 11.4 3.3 14.2
IPLV
5095 SH
APCY TR
94.5 kW
90.4 kW
99.4 EER
11.4 COP
3.3 14.1 5310
APCYTH TR
312.1 kW
296 kW
323 EER
11.6 COP
3.4 14.1
5075
5115 SH 76.2
115.5 71
113.9 78.5
122.9 11.6
11.3 3.4
3.3 14.0
14.3 5295 DH
5325 TH 295.2
326.4 287.6
311.1 311.6
338.1 11.4
11.6 3.3
3.4 14.2
14.1
5085
5135 SH 83.5
134.2 81.7
124 89.2
136 11.2
11.8 3.3
3.5 14.0
14.2 5300
5325 DH
TH 303.5
325.8 295.3
317.1 319.3
344.1 11.4 3.3 14.2
5095
5150 SH 94.5
149.3 90.4
146.8 99.4
158.8 11.4
11.3 3.3 14.1
14.3 5310 DH
5345 TH 312.1
345.6 296
340.8 323
367.8 11.6
11.3 3.4
3.3 14.1
14.3
5115 DH
5155 SH 115.5
157.3 113.9
143.3 122.9
158.3 11.3
11.9 3.3
3.5 14.3
14.0 5325
5345 DH
TH 326.4
345.1 311.1
341 338.1
368 11.6
11.3 3.4
3.3 14.1
14.3
5135 DH
5165 SH 134.2
165.1 124
154.1 136
169.1 11.8
11.7 3.5
3.4 14.2
14.0 5325
5365 TH 325.8
363.2 317.1
350.2 344.1
380.2 11.4
11.5 3.3
3.4 14.2
14.0
5150 DH
5175 SH 149.3
172.8 146.8
165.2 158.8
180.2 11.3
11.5 3.3
3.4 14.3
14.0 5345
5380 DH
TH 345.6
377.8 340.8
373.4 367.8
403.4 11.3
11.2 3.3 14.3
14.1
5155
5185 DH 157.3
183.1 143.3
180.2 158.3
195.2 11.9
11.3 3.5
3.3 14.0
14.1 5345
5395 TH 345.1
395.5 341
382.6 368
415.6 11.3
11.4 3.3 14.3
14.0
5165
5195 DH 165.1
196.2 154.1
182.9 169.1
200.9 11.7 3.4 14.0
14.1 5365
5410 TH 363.2
409.7 350.2
405.6 380.2
438.6 11.5
11.2 3.4
3.3 14.0
14.1
5175
5210 DH 172.8
210.2 165.2
203.5 180.2
221.5 11.5
11.4 3.4
3.3 14.0
14.2 5380
5425 TH 377.8
426.8 373.4
414.8 403.4
450.8 11.2
11.4 3.3 14.1
5185
5230 DH 183.1
231.3 180.2
227.8 195.2
245.8 11.3 3.3 14.1
14.3 5395
5455 TH 395.5
453.2 382.6
442.2 415.6
478.2 11.4 3.3 14.0
5195
5250 DH 196.2
249.8 182.9
237.3 200.9
258.3 11.7
11.6 3.4 14.1
14.0 5410
5475 TH 409.7
474.7 405.6
461.6 438.6
497.6 11.2
11.4 3.3
3.4 14.1
14.2
5210
5265 DH 210.2
264.7 203.5
260.5 221.5
281.5 11.4
11.3 3.3 14.2
14.1 5425
5495 TH 426.8
493.4 414.8
491.6 450.8
527.6 11.4
11.2 3.3 14.1
14.3
5230
5285 DH 231.3
288.4 227.8
272 245.8
296 11.3
11.7 3.3
3.4 14.3
14.1 5455 TH 453.2 442.2 478.2 11.4 3.3 14.0
5520 TH 519 525.4 561.4 11.1 3.3 14.4
5250
5285 DH
TH 249.8
285.1 237.3
272.6 258.3
296.6 11.6
11.5 3.4 14.0
14.1 5475 TH 474.7 461.6 497.6 11.4 3.4 14.2
5265 DH 264.7 260.5 281.5 11.3 3.3 14.1 5495 TH 493.4 491.6 527.6 11.2 3.3 14.3 17
Table
Capacity
5285 DHrating288.4
and Part Load272
Performance 296 60- Hz high 11.7
efficiency 3.4 14.1
5520 TH 519 525.4 561.4 11.1 3.3 14.4
5285 TH 285.1 272.6 296.6 11.5 3.4 14.1
Nominal Total Power Nominal Total Power
(2)
FULL LOAD (2)
FULL LOAD
Model
Capacity ratingCompressor
Capacity and Part
(1) PI
Load
Input Performance
(2)

Capacity rating and Part Load Performance 60- Hz high efficiency


-60 Model
IPLV Hz high efficiency
Capacity
Compressor PI (1)
Input(2) IPLV
APCY TR kW kW EER COP APCY TR kW kW EER COP
6090 SH 89.4
Nominal
87.8 97.8
Total Power
11.0 3.2 14.0 6310 TH 309.8
Nominal
301.9 333.9
Total Power
11.1 3.3 14.1
(2)
FULL LOAD PI(2) FULL LOAD
Model
6100 SH Capacity101 (1) Compressor
102.5 PI 112.5
Input (2) 10.8 3.2 14.1
IPLV
Model
6320 DH 320.1
Capacity (1) Compressor
309 341
Input (2) 11.3 3.3 14.2
IPLV
6120
APCYSH TR
118.9 kW
114.4 kW
126.4 EER
11.3 COP
3.3 14.2 6320
APCYTH TR
321.7 kW
319.7 kW
351.7 EER
11.0 COP
3.2 14.2
6090
6140 SH 89.4
137.8 87.8
133.3 97.8
147.3 11.0
11.2 3.2
3.3 14.0
14.2 6310 DH
6340 TH 309.8
341.2 301.9
322.6 333.9
358.6 11.1
11.4 3.3 14.1
14.0
6100
6160 SH 101
157.5 102.5
153.7 112.5
169.7 10.8
11.1 3.2
3.3 14.1
14.2 6320
6345 DHTH 320.1
342.7 309
325.1 341
361.1 11.3
11.4 3.3 14.2
14.1
6120
6175 SH 118.9
176.7 114.4
174 126.4
192 11.3
11.0 3.3
3.2 14.2
14.1 6320
6355 TH 321.7
354.8 319.7
342.7 351.7
378.7 11.0
11.2 3.2
3.3 14.2
6140 DH
6185 SH 137.8
185.2 133.3
177.5 147.3
197.5 11.2
11.3 3.3 14.2
14.0 6340
6360 DH 341.2
358.7 322.6
349.9 358.6
385.9 11.4
11.2 3.3 14.0
14.1
6160 SH
6195 DH 157.5
194.1 153.7
191.2 169.7
211.2 11.1
11.0 3.3
3.2 14.2
14.0 6345
6375 TH 342.7
374.5 325.1
354.5 361.1
394.5 11.4 3.3 14.1
14.0
6175 DH
6205 SH 176.7
202.9 174
205.3 192
225.3 11.0
10.8 3.2 14.1 6355 DH
6385 TH 354.8
384.5 342.7
370.4 378.7
410.4 11.2 3.3 14.2
14.0
6185
6220 DH 185.2
218.2 177.5
209.1 197.5
233.1 11.3
11.2 3.3 14.0
14.1 6360
6390 DHTH 358.7
390.7 349.9
379.8 385.9
419.8 11.2 3.3 14.1
14.0
6195
6230 DH 194.1
230 191.2
226.4 211.2
250.4 11.0 3.2 14.0
14.2 6375 DH
6405 TH 374.5
406.3 354.5
405.2 394.5
445.2 11.4
11.0 3.3
3.2 14.0
14.2
6205
6240 DH 202.9
237.9 205.3
228.9 225.3
252.9 10.8
11.3 3.2
3.3 14.1
14.2 6385
6410 DHTH 384.5
409.8 370.4
391.4 410.4
435.4 11.2
11.3 3.3 14.0
6220
6260 DH 218.2
258 209.1
241 233.1
269 11.2
11.5 3.3
3.4 14.1
14.0 6390
6425 TH 390.7
426.8 379.8
418.1 419.8
462.1 11.2
11.1 3.3
3.2 14.0
14.1
6230
6275 DH 230
274.7 226.4
266.2 250.4
294.2 11.0
11.2 3.2
3.3 14.2 6405
6445 DHTH 406.3
446.5 405.2
431.3 445.2
479.3 11.0
11.2 3.2
3.3 14.2
14.0
6240
6285 DH
TH 237.9
283 228.9
261.5 252.9
293.5 11.3
11.6 3.3
3.4 14.2
14.0 6410
6465 TH 409.8
462.9 391.4
457.8 435.4
505.8 11.3
11.0 3.3
3.2 14.0
14.1
6260
6290 DH
TH 258
292.1 241
274.7 269
306.7 11.5
11.4 3.4
3.3 14.0 6425
6480 TH 426.8
478.7 418.1
485.1 462.1
533.1 11.1
10.8 3.2 14.1
6275
6300 DH 274.7
301.9 266.2
281.8 294.2
313.8 11.2
11.5 3.3
3.4 14.2
14.1 6445
6495 TH 446.5
494.1 431.3
512.8 479.3
560.8 11.2
10.6 3.3
3.1 14.0
14.2
6285
6300 TH 283
301 261.5
288.2 293.5
320.2 11.6
11.3 3.4
3.3 14.0
14.1 6465
6510 TH 462.9
509 457.8
541.1 505.8
589.1 11.0
10.4 3.2
3.0 14.1
14.2
6290 TH 292.1 274.7 306.7 11.4 3.3 14.0 6480 TH 478.7 485.1 533.1 10.8 3.2 14.1
Notes:
6300 DH 301.9 281.8 313.8 11.5 3.4 14.1 6495 TH 494.1 512.8 560.8 10.6 3.1 14.2
1.Nominal Capacity are based on standard AHRI 590/550 conditions of 95ºF ambient, 44ºF leaving chilled water temperature, 10ºF evaporator range and 0.0001 ft2.hºF/Btu fouling factor.
6300 TH
2.Power 301 in this page288.2
input mentioned 320.2
should not be used 11.3selection. MCA
for cable or fuse values given 6510
3.3 and MFA14.1 in the TH 509pages (17 to 541.1
electrical data 589.1for the same.
19) should be referred 10.4 3.0 14.2
Table 18
Notes:
1.Nominal Capacity are based on standard AHRI 590/550 conditions of 95ºF ambient, 44ºF leaving chilled water temperature, 10ºF evaporator range and 0.0001 ft2.hºF/Btu fouling factor.
2.Power input mentioned in this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical data pages (17 to 19) should be referred for the same.

Notes:

1.Nominal Capacity are based on standard AHRI 550/590 conditions of 95ºF ambient, 44ºF leaving chilled water temperature,
10ºF evaporator range and 0.0001 ft2.hºF/Btu fouling factor.
2.Power input mentioned in this page should not be used for cable or fuse selection. MCA and MFA values given in the electrical
data pages (28 to 32) should be referred for the same.

24
SKM Compact Screw Chillers
APCY-H Series - R-134a

Capacity Correction & Limits


Evaporator Chiller Limits of Operation Cooler Fouling Factors
Maximum LCWT : 48°F (8.9°C) The units are rated at 0.0001h. ft².°F/Btu (0.018m² . K/kW). Other
Maximum ECWT : 76°F (24.4°C)* than this fouling factor use SKM Air Cooled Chiller Selection
Minimum LCWT : 41°F (5°C) Software to determine the unit performance.
An increase in the fouling factor, results in decrease in the unit
For Lower LCWT ethylene glycol solution to be used, consult SKM.
capacity and efficiency.
(*For short periods.)

Altitude Correction Factor


Range & Flow Limits
The units ratings are based on sea level. Above sea level apply
Range limit 8°F - 16°F (4.4°C - 8.9°C) except where limited by the following correction factors:
water flow rate limits for evaporator. For minimum & maximum
water flow rate refer to page 27. Altitude Capacity
Power Multiplier
Feet Meters Multiplier
0 0 1 1
Working & Test Pressures
2000 610 0.99 1.01
4000 1219 0.98 1.02
Evaporator Pressure Refrigerant Water
6000 1829 0.97 1.03
psig 239.3 145
Maximum Working Pressure 8000 2438 0.96 1.04
kPa 1650 1000 10000 3048 0.95 1.05
psig 334.3 207.4 Table 21
Test Pressure Range Correction Factors
kPa 2305 1430
Table 19 Capacity ratings based on 10°F (IP) and 5°C (SI) chilled water
range. For other than this range please use correction factor below.

Range
Condenser Pressure Refrigerant Capacity Multiplier Power Multiplier
psig 300 °F (IP) °C (SI)
Maximum Working Pressure
kPa 2068 8 3.9 0.995 0.998
psig 450 10 5 1 1
Test Pressure
kPa 3102 12 6.1 1.005 1.002
Table 20
14 7.2 1.01 1.004
16 8.3 1.015 1.006
Table 22

25
SKM Compact Screw Chillers
APCY-H Series - R-134a

Evaporator Water Pressure Drop

(kPa) Ft.Wg

(300) 100.0

B
D E
H

C G
F
A

(30) 10.0

(3) 1.0
10.0 100.0 1000.0 10000.0 US gpm
(0.63) (6.3) (63.1) (631) (Liter / sec)

Evaporator Water Pressure Drop


Water Flow Rate
Graph Models Minimum Maximum
US gpm L/s US gpm L/s
A 5075 SH ,5085 SH ,5095 SH ,6090 SH 70 4.42 220 13.88
B 6100 SH 120 7.57 451 28.45
C 5115 SH ,5135 SH ,5150 SH ,6120 SH ,6140 SH ,6160 SH ,6175 SH 224 14.13 566 35.71
5155 DH ,5165 DH ,5175 DH ,5185 DH ,5195 DH ,5210 DH ,6185 DH ,6195 DH
D 307 19.37 767 48.39
,6205 DH ,6220 DH ,6230 DH
E 5230 DH ,5250 DH ,5265 DH ,6240 DH ,6260 DH ,6275 DH 475 29.97 999 63.03
5285 DH ,5300 DH ,5325 DH ,5345 DH ,6300 DH ,6320 DH ,6340 DH ,6360 DH
F 450 28.39 1177 74.26
,6385 DH ,6405 DH
5285 TH ,5295 TH ,5310 TH ,5325 TH ,6285 TH ,6290 TH ,6300 TH ,6310 TH ,6320
462 29.15 1177 74.26
TH
G
5345 TH ,5365 TH ,5380 TH ,5395 TH ,5410 TH ,5425 TH ,6345 TH ,6355 TH ,6375
462 29.15 1373 86.62
TH ,6390 TH ,6410 TH ,6425 TH ,6445 TH ,6465 TH ,6480 TH ,6495 TH ,6510 TH
5455 TH ,5475 TH ,5495 TH 520 32.81 1717 108.33
H
5520 TH 640 40.38 1962 123.78
Table 23
Note :
To calculate the water pressure drop for shaded models,use the indicated graphs and halve the WFR as the evaporators are
connected in parallel.

26
SKM Compact Screw Chillers
APCY-H Series - R-134a

Selection Procedure
APCY-H Chillers should be selected with specific Design Considerations, requirements and parameters of the intended application.
Care and good engineering should lead to an efficient and cost effective selection. Sample procedures are shown below:

Example 1: (IP System) Example 2: (SI System)

Select an Air Cooled Package Chiller giving a capacity Select an Air Cooled Package Chiller giving a capacity of 620
of 150.0 TR to cool water from 54ºF to 44ºF at 2000 ft. kW of refrigeration to cool water from 12ºC to 7ºC at 610M
altitude, 0.0001 fouling factor, power supply 415V/3Ph/50Hz an altitude, 0.018 fouling factor, power supply 380V/3Ph/60Hz

SKM Split Air Conditioners


115 ºF ambient Temperature. and 40 ºC ambient Temperature.

APCY Series - R134a


Find compressor power input in kW. Find compressor power input in kW.

Selection: Selection:

Apply the following factors to convert the required capacity to Apply the following factors to convert the required capacity to
tabulated capacity ratings. tabulated capacity ratings.

Capacity Multiplier Power Multiplier


Capacity Multiplier Power Multiplier
Altitude 0.99 1.01
Altitude 0.99 1.01

150
Tabulated rated capacity = 620
0.99 Tabulated rated capacity =
0.99
= 151.5 TR
=
626.3 kW
Refer to capacity rating 50Hz under 115 ºF condenser entering
air temperature and select a chiller giving a capacity nearest Refer to capacity rating 60Hz under 40 ºC condenser entering
larger to 151.5 at 44 ºF LCWT. Select model APCY 5165DH air temperature and select a chiller giving a capacity nearest
giving a capacity of 153.2 TR and PI = 204.2 kW. larger to 626.3 at 7 ºC LCWT. Select model APCY 6185DH
giving a capacity of 635.5 kW and PI = 202.3 kW.
Apply correction factors to the selected unit to find actual
capacity and P I. Apply correction factors to the selected unit to find actual
capacity and P I.
Capacity = 153.2 x 0.99
= 151.7 TR Capacity = 635.5 x 0.99
= 629.1 kW
P I = 204.2 x 1.01
= 206.2 kW P I = 202.3x 1.01
= 204.3 kW
Calculation of Water Flow Rate (WFR)
Calculation of Water Flow Rate (WFR)
To calculate the water flow rate to be circulated, use the
following: To calculate the water flow rate to be circulated, use the
following:
C.CAP (TR) x 24
WFR (US gpm) = C.CAP (kW) x 0.239
Range (ºF) WFR (L/s) =
Range (ºC)

151.7 x 24 629.1 x 0.239
= =364.1 US gpm = = 30.1 L/s.
10 5

For more details refer to other specifications and


dimensional drawings for the selected model.

27
SKM Compact Screw Chillers
APCY-H Series - R-134a
APCY-H1 Series (Bulletin #116/2015A)
ELECTRICAL
ELECTRICAL DATA DATA
Power Supply: 380V/3PH/50Hz

Unit Characteristic Compressor Condenser Fan Motor


Model
APCY
MFA MCA ICF QTY RLA LRA QTY FLA LRA
5075 SH 500 287 658 1 214 641 5 3.96 16.5
5085 SH 630 316 847 1 237 830 5 3.96 16.5
5095 SH 800 360 963 1 269 946 6 3.96 16.5
5115 SH 800 423 545 1 319 528 6 3.96 16.5
5135 SH 1000 485 647 1 363 630 8 3.96 16.5
5150 SH 1000 544 734 1 410 717 8 3.96 16.5
5155 DH 800 521 891 2 214 641 10 3.96 16.5
5165 DH 800 550 1080 1+1 237 + 214 830 + 641 10 3.96 16.5
5175 DH 1000 573 1103 2 237 830 10 3.96 16.5
5185 DH 1000 613 1219 1+1 269 + 237 946 + 830 10 3.96 16.5
5195 DH 1000 653 1255 2 269 946 12 3.96 16.5
5210 DH 1250 715 1305 1+1 319 + 269 528 + 946 12 3.96 16.5
5230 DH 1250 765 887 2 319 528 12 3.96 16.5
5250 DH 1250 828 993 1+1 363 + 319 630 + 528 14 3.96 16.5
5265 DH 1250 872 1037 2 363 630 14 3.96 16.5
5285 DH 1500 939 1128 1+1 410 + 363 717 + 630 16 3.96 16.5
5285 TH 1250 906 1508 2+1 269 + 237 946 + 830 16 3.96 16.5
5295 TH 1250 938 1540 3 269 946 16 3.96 16.5
5300 DH 1600 986 1175 2 410 717 16 3.96 16.5
5310 TH 1600 1008 1598 1+2 319 + 269 528 + 946 18 3.96 16.5
5325 DH 1600 1073 1330 1+1 473 + 410 868 + 717 18 3.96 16.5
5325 TH 1600 1058 1648 2+1 319 + 269 528 + 946 18 3.96 16.5
5345 DH 1600 1136 1393 2 473 868 18 3.96 16.5
5345 TH 1600 1108 1230 3 319 528 18 3.96 16.5
5365 TH 1600 1171 1332 1+2 363 + 319 630 + 528 20 3.96 16.5
5380 TH 1250 + 800 872 + 423 1037 + 545 2+1 363 + 319 630 + 528 20 3.96 16.5
5395 TH 1000 + 1250 485 + 872 647 + 1037 3 363 630 22 3.96 16.5
5410 TH 1000 + 1250 544 + 872 734 + 1037 1+2 410 + 363 717 + 630 22 3.96 16.5
5425 TH 1600 + 1000 986 + 485 1175 + 647 2+1 410 + 363 717 + 630 24 3.96 16.5
5455 TH 1600 + 1000 986 + 544 1175 + 734 3 410 717 24 3.96 16.5
5475 TH 1250 + 1600 623 + 986 885 + 1175 1+2 473 + 410 868 + 717 24 3.96 16.5
5495 TH 1600 + 1000 1128 + 544 1389 + 734 2+1 473 + 410 868 + 717 24 3.96 16.5
5520 TH 1600 + 1250 1128 + 623 1389 + 885 3 473 868 24 3.96 16.5
Table 24
NOTE:
220/1PH/50Hz control power must be supplied from a separate source, through field supplied and installed disconnect switch.
NOTE:
220/1PH/50Hz control power must be supplied from a separate source, through field supplied and installed disconnect switch

Legend
MFA Maximum Fuse Amps (for fuse/circuit breaker sizing), RLA Rated Load Amps. (at worst operating condition) .
complies with NEC Article 440-22 & 430-52. LRA Locked Rotor Amps.
MCA Minimum Circuit Amps.(for wire sizing), complies with FLA Full Load Amps.
NEC article 440-33.
ICF Maximum Instantaneous Current Flow.

Note :

Voltage imbalance not to exceed ± 2 % of the rated voltage.

28
SKM Compact Screw Chillers
APCY-H Series - R-134a
APCY-H1 Series (Bulletin #116/2015A)
ELECTRICAL DATA
ELECTRICAL DATA
Power Supply: 415V/3PH/50Hz

Unit Characteristic Compressor Condenser Fan Motor


Model
APCY
MFA MCA ICF QTY RLA LRA QTY FLA LRA
5075 SH 500 265 639 1 196 622 5 3.96 16.5
5085 SH 630 291 834 1 217 817 5 3.96 16.5
5095 SH 630 331 939 1 246 922 6 3.96 16.5
5115 SH 800 389 515 1 292 498 6 3.96 16.5
5135 SH 800 448 604 1 333 587 8 3.96 16.5
5150 SH 1000 502 675 1 376 658 8 3.96 16.5
5155 DH 800 481 854 2 196 622 10 3.96 16.5
5165 DH 800 507 1049 1+1 217 + 196 817 + 622 10 3.96 16.5
5175 DH 800 528 1070 2 217 817 10 3.96 16.5
5185 DH 1000 564 1175 1+1 246 + 217 922 + 817 10 3.96 16.5
5195 DH 1000 601 1208 2 246 922 12 3.96 16.5
5210 DH 1000 659 1254 1+1 292 + 246 498 + 922 12 3.96 16.5
5230 DH 1000 705 830 2 292 498 12 3.96 16.5
5250 DH 1250 764 923 1+1 333 + 292 587 + 498 14 3.96 16.5
5265 DH 1250 805 964 2 333 587 14 3.96 16.5
5285 DH 1250 866 1039 1+1 376 + 333 658 + 587 16 3.96 16.5
5285 TH 1250 834 1441 2+1 246 + 217 922 + 817 16 3.96 16.5
5295 TH 1250 863 1470 3 246 922 16 3.96 16.5
5300 DH 1500 909 1082 2 376 658 16 3.96 16.5
5310 TH 1250 928 1524 1+2 292 + 246 498 + 922 18 3.96 16.5
5325 DH 1600 989 1248 1+1 433 + 376 820 + 658 18 3.96 16.5
5325 TH 1600 974 1570 2+1 292 + 246 498 + 922 18 3.96 16.5
5345 DH 1600 1046 1305 2 433 820 18 3.96 16.5
5345 TH 1600 1020 1146 3 292 498 18 3.96 16.5
5365 TH 1600 1079 1235 1+2 333 + 292 587 + 498 20 3.96 16.5
5380 TH 1600 1120 1280 2+1 333 + 292 587 + 498 20 3.96 16.5
5395 TH 1600 1169 1325 3 333 587 22 3.96 16.5
5410 TH 1000 + 1250 502 + 805 675 + 964 1+2 376 + 333 658 + 587 22 3.96 16.5
5425 TH 1600 + 800 909 + 448 1082 + 604 2+1 376 + 333 658 + 587 24 3.96 16.5
5455 TH 1600 + 1000 909 + 502 1082 + 675 3 376 658 24 3.96 16.5
5475 TH 1250 + 1600 573 + 909 837 + 1082 1+2 433 + 376 820 + 658 24 3.96 16.5
5495 TH 1600 + 1000 1038 + 502 1301 + 675 2+1 433 + 376 820 + 658 24 3.96 16.5
5520 TH 1600 + 1250 1038 + 573 1301 + 837 3 433 820 24 3.96 16.5
Table 25
NOTE:
240/1PH/50Hz control power must be supplied from a separate source, through field supplied and installed disconnect switch.
NOTE:
240/1PH/50Hz control power must be supplied from a separate source, through field supplied and installed disconnect switch

Legend
MFA Maximum Fuse Amps (for fuse/circuit breaker sizing), RLA Rated Load Amps. (at worst operating condition) .
complies with NEC Article 440-22 & 430-52. LRA Locked Rotor Amps.
MCA Minimum Circuit Amps.(for wire sizing), complies with FLA Full Load Amps.
NEC article 440-33.
ICF Maximum Instantaneous Current Flow.

Note :

Voltage imbalance not to exceed ± 2 % of the rated voltage.

29
SKM Compact Screw Chillers
APCY-H Series - R-134a
APCY-H1 Series (Bulletin #116/2015A)
ELECTRICAL DATA
ELECTRICAL DATA
Power Supply: 440V/3PH/50Hz

Unit Characteristic Compressor Condenser Fan Motor


Model
APCY
MFA MCA ICF QTY RLA LRA QTY FLA LRA
5075 SH 500 250 585 1 186 570 5 3.5 14.7
5085 SH 500 275 733 1 206 718 5 3.5 14.7
5095 SH 630 312 893 1 233 878 6 3.5 14.7
5115 SH 800 361 475 1 272 460 6 3.5 14.7
5135 SH 800 408 552 1 304 537 8 3.5 14.7
5150 SH 1000 473 610 1 356 595 8 3.5 14.7
5155 DH 800 454 788 2 186 570 10 3.5 14.7
5165 DH 800 479 936 1+1 206 + 186 718 + 570 10 3.5 14.7
5175 DH 800 499 956 2 206 718 10 3.5 14.7
5185 DH 800 532 1116 1+1 233 + 206 878 + 718 10 3.5 14.7
5195 DH 800 566 1147 2 233 878 12 3.5 14.7
5210 DH 1000 615 1186 1+1 272 + 233 460 + 878 12 3.5 14.7
5230 DH 1000 654 768 2 272 460 12 3.5 14.7
5250 DH 1250 701 848 1+1 304 + 272 537 + 460 14 3.5 14.7
5265 DH 1250 733 880 2 304 537 14 3.5 14.7
5285 DH 1250 805 942 1+1 356 + 304 595 + 537 16 3.5 14.7
5285 TH 1250 786 1367 2+1 233 + 206 878 + 718 16 3.5 14.7
5295 TH 1250 813 1394 3 233 878 16 3.5 14.7
5300 DH 1250 857 994 2 356 595 16 3.5 14.7
5310 TH 1250 869 1440 1+2 272 + 233 460 + 878 18 3.5 14.7
5325 DH 1600 929 1167 1+1 408 + 356 765 + 595 18 3.5 14.7
5325 TH 1250 908 1479 2+1 272 + 233 460 + 878 18 3.5 14.7
5345 DH 1600 981 1219 2 408 765 18 3.5 14.7
5345 TH 1250 947 1061 3 272 460 18 3.5 14.7
5365 TH 1600 994 1138 1+2 304 + 272 537 + 460 20 3.5 14.7
5380 TH 1600 1026 1173 2+1 304 + 272 537 + 460 20 3.5 14.7
5395 TH 1600 1065 1209 3 304 537 22 3.5 14.7
5410 TH 1600 1130 1267 1+2 356 + 304 595 + 537 22 3.5 14.7
5425 TH 1600 1189 1326 2+1 356 + 304 595 + 537 24 3.5 14.7
5455 TH 1250 + 1000 857 + 473 994 + 610 3 356 595 24 3.5 14.7
5475 TH 1000 + 1250 538 + 857 780 + 994 1+2 408 + 356 765 + 595 24 3.5 14.7
5495 TH 1600 + 1000 974 + 473 1216 + 610 2+1 408 + 356 765 + 595 24 3.5 14.7
5520 TH 1600 + 1000 974 + 538 1216 + 780 3 408 765 24 3.5 14.7
Table 26
NOTE:
220/1PH/50Hz control power must be supplied from a separate source, through field supplied and installed disconnect switch.
NOTE:
220/1PH/50Hz control power must be supplied from a separate source, through field supplied and installed disconnect switch

Legend
MFA Maximum Fuse Amps (for fuse/circuit breaker sizing), RLA Rated Load Amps. (at worst operating condition) .
complies with NEC Article 440-22 & 430-52. LRA Locked Rotor Amps.
MCA Minimum Circuit Amps.(for wire sizing), complies with FLA Full Load Amps.
NEC article 440-33.
ICF Maximum Instantaneous Current Flow.

Note :

Voltage imbalance not to exceed ± 2 % of the rated voltage.

30
SKM Compact Screw Chillers
APCY-H Series - R-134a
APCY-H1 Series (Bulletin #116/2015A)
ELECTRICAL DATA
ELECTRICAL DATA
Power Supply: 380 - 400V/3PH/60Hz

Unit Characteristic Compressor Condenser Fan Motor


Model
APCY
MFA MCA ICF QTY RLA LRA QTY FLA LRA
6090 SH 630 337 774 1 254 755 5 3.9 19
6100 SH 800 376 1037 1 285 1018 5 3.9 19
6120 SH 800 431 1233 1 326 1214 6 3.9 19
6140 SH 1000 497 661 1 376 642 7 3.9 19
6160 SH 1000 556 807 1 420 788 8 3.9 19
6175 SH 1250 658 951 1 498 932 9 3.9 19
6185 DH 1000 611 1048 2 254 755 10 3.9 19
6195 DH 1000 649 1311 1+1 285 + 254 1018 + 755 10 3.9 19
6205 DH 1000 680 1342 2 285 1018 10 3.9 19
6220 DH 1250 739 1541 1+1 326 + 285 1214 + 1018 12 3.9 19
6230 DH 1250 780 1582 2 326 1214 12 3.9 19
6240 DH 1250 780 1582 2 326 1214 12 3.9 19
6260 DH 1250 851 1636 1+1 376 + 326 642 + 1214 14 3.9 19
6275 DH 1600 901 1064 2 376 642 14 3.9 19
6285 TH 1250 888 1321 3 254 755 16 3.9 19
6290 TH 1250 927 1584 1+2 285 + 254 1018 + 755 16 3.9 19
6300 DH 1600 963 1214 1+1 420 + 376 788 + 642 16 3.9 19
6300 TH 1250 958 1615 2+1 285 + 254 1018 + 755 16 3.9 19
6310 TH 1600 989 1646 3 285 1018 16 3.9 19
6320 DH 1600 1007 1258 2 420 788 16 3.9 19
6320 TH 1600 1040 1842 1+2 326 + 285 1214 + 1018 16 3.9 19
6340 DH 1600 1113 1406 1+1 498 + 420 932 + 788 18 3.9 19
6345 TH 1600 1089 1891 2+1 326 + 285 1214 + 1018 18 3.9 19
6355 TH 1600 1130 1932 3 326 1214 18 3.9 19
6360 DH 1600 1191 1484 2 498 932 18 3.9 19
6375 TH 1600 1200 1990 1+2 376 + 326 642 + 1214 20 3.9 19
6385 DH 1600 + 1250 720 + 662 1104 + 951 1+1 545 + 498 1085 + 932 20 3.9 19
6390 TH 1600 + 800 901 + 431 1064 + 1233 2+1 376 + 326 642 + 1214 20 3.9 19
6405 DH 1600 + 1600 720 + 720 1104 + 1104 2 545 1085 20 3.9 19
6410 TH 1000 + 1600 501 + 901 661 + 1064 3 376 642 22 3.9 19
6425 TH 1000 + 1600 556 + 901 807 + 1064 1+2 420 + 376 788 + 642 22 3.9 19
6445 TH 1600 + 1000 1007 + 501 1258 + 661 2+1 420 + 376 788 + 642 24 3.9 19
6465 TH 1600 + 1000 1007 + 556 1258 + 807 3 420 788 24 3.9 19
6480 TH 1250 + 1600 654 + 1007 951 + 1258 1+2 498 + 420 932 + 788 24 3.9 19
6495 TH 1600 + 1000 1183 + 556 1480 + 807 2+1 498 + 420 932 + 788 24 3.9 19
6510 TH 1600 + 1250 1183 + 654 1480 + 951 3 498 932 24 3.9 19
Table 27
NOTE:
220/1PH/60Hz control power must be supplied from a separate source, through field supplied and installed disconnect switch.
NOTE:
220/1PH/60Hz control power must be supplied from a separate source, through field supplied and installed disconnect switch

Legend
MFA Maximum Fuse Amps (for fuse/circuit breaker sizing), RLA Rated Load Amps. (at worst operating condition) .
complies with NEC Article 440-22 & 430-52. LRA Locked Rotor Amps.
MCA Minimum Circuit Amps.(for wire sizing), complies with FLA Full Load Amps.
NEC article 440-33.
ICF Maximum Instantaneous Current Flow.

Note :

Voltage imbalance not to exceed ± 2 % of the rated voltage.

31
SKM Compact Screw Chillers
APCY-H Series - R-134a
APCY-H1 Series (Bulletin #116/2015A)
ELECTRICAL DATA
ELECTRICAL DATA
Power Supply: 460V/3PH/60Hz

Unit Characteristic Compressor Condenser Fan Motor


Model
APCY
MFA MCA ICF QTY RLA LRA QTY FLA LRA
6090 SH 500 284 694 1 212 674 5 3.8 20
6100 SH 630 317 895 1 238 875 5 3.8 20
6120 SH 800 363 1016 1 272 996 6 3.8 20
6140 SH 800 418 577 1 313 557 7 3.8 20
6160 SH 1000 482 683 1 361 663 8 3.8 20
6175 SH 1000 549 775 1 412 755 9 3.8 20
6185 DH 800 515 925 2 212 674 10 3.8 20
6195 DH 800 548 1126 1+1 238 + 212 875 + 674 10 3.8 20
6205 DH 1000 574 1152 2 238 875 10 3.8 20
6220 DH 1000 624 1277 1+1 272 + 238 996 + 875 12 3.8 20
6230 DH 1000 658 1311 2 272 996 12 3.8 20
6240 DH 1000 658 1311 2 272 996 12 3.8 20
6260 DH 1250 716 1356 1+1 313 + 272 557 + 996 14 3.8 20
6275 DH 1250 757 917 2 313 557 14 3.8 20
6285 TH 1000 750 1156 3 212 674 16 3.8 20
6290 TH 1250 782 1357 1+2 238 + 212 875 + 674 16 3.8 20
6300 DH 1250 825 1026 1+1 361 + 313 663 + 557 16 3.8 20
6300 TH 1250 808 1383 2+1 238 + 212 875 + 674 16 3.8 20
6310 TH 1250 834 1409 3 238 875 16 3.8 20
6320 DH 1250 873 1074 2 361 663 16 3.8 20
6320 TH 1250 877 1530 1+2 272 + 238 996 + 875 16 3.8 20
6340 DH 1600 944 1170 1+1 412 + 361 755 + 663 18 3.8 20
6345 TH 1250 918 1572 2+1 272 + 238 996 + 875 18 3.8 20
6355 TH 1250 952 1606 3 272 996 18 3.8 20
6360 DH 1600 995 1221 2 412 755 18 3.8 20
6375 TH 1600 1011 1654 1+2 313 + 272 557 + 996 20 3.8 20
6385 DH 1600 1076 1383 1+1 470 + 412 913 + 755 20 3.8 20
6390 TH 1600 1052 1695 2+1 313 + 272 557 + 996 20 3.8 20
6405 DH 1600 1134 1441 2 470 913 20 3.8 20
6410 TH 1600 1101 1256 3 313 557 22 3.8 20
6425 TH 1600 1161 1362 1+2 361 + 313 663 + 557 22 3.8 20
6445 TH 1250 + 800 873 + 422 1074 + 577 2+1 361 + 313 663 + 557 24 3.8 20
6465 TH 1250 + 1000 873 + 482 1074 + 683 3 361 663 24 3.8 20
6480 TH 1000 + 1250 545 + 873 775 + 1074 1+2 412 + 361 755 + 663 24 3.8 20
6495 TH 1600 + 1000 988 + 482 1217 + 683 2+1 412 + 361 755 + 663 24 3.8 20
6510 TH 1600 + 1000 988 + 545 1217 + 775 3 412 755 24 3.8 20
Table 28
NOTE:
220/1PH/60Hz control power must be supplied from a separate source, through field supplied and installed disconnect switch.
NOTE:
220/1PH/60Hz control power must be supplied from a separate source, through field supplied and installed disconnect switch

Legend
MFA Maximum Fuse Amps (for fuse/circuit breaker sizing), RLA Rated Load Amps. (at worst operating condition) .
complies with NEC Article 440-22 & 430-52. LRA Locked Rotor Amps.
MCA Minimum Circuit Amps.(for wire sizing), complies with FLA Full Load Amps.
NEC article 440-33.
ICF Maximum Instantaneous Current Flow.

Note :

Voltage imbalance not to exceed ± 2 % of the rated voltage.

32
POWER SUPPLY
L1
L2
L3 LEGEND
FDS
( BY OTHERS ) CB1 F FIELD CONNECTIONS & FIELD SUPPLIED DEVICES WFS WATER FLOW SWITCH
2A
FDS FUSED DISCONNECT SWITCH AFT ANTIFREEZE THERMOSTAT
CT CURRENT TRANSFORMER SV SOLENOID VALVE
CT MPCB1 MPCB2 MPCB3 MPCB4 MPCB5 MPCB6
CB CIRCUIT BREAKER ESV ECINOMISER SOLENOID VALVE
I> I> I> I> I> I> I> I> I> I> I> I> I> I> I> I> I> I>
C1 C2 C CONTACTOR S MANUAL PUMP DOWN SWITCH
1 7 CM COMPRESSOR MOTOR MP COMPRESSOR MOTOR PROTECTOR
2 CM 8 C3 C4 C5 C6 C7 C8
3 9 VMM MPCB MOTOR PROTECTOR CIRCUIT BREAKER OLM OIL LEVEL MONITOR
A B C
Discharge CFM CONDENSER FAN MOTOR F POWER CIRCUIT FUSE
TEMP. PTC CFM1 CFM2 CFM3 CFM4 CFM5 CFM6 NC Com NO

MCB MINIATURE CIRCUIT BREAKER VMM VOLTAGE MONITORING MODULE


CCH CRANK CASE HEATER RPB RESET PUSH BUTTON
L1 L2 L3 S1 S2
Typical Wiring Diagram

SS SELECTOR SWITCH
N L
CR CONTROL RELAY
INT69HBY RPB

M1
M2

MP

L
MCB1

SS SS
MCB2 REMOTE LOCAL
SV2 SV3 ESV
C1 C2 C3 C4 C5 C6 C7 C8 CR3

CFM 1
CFM 2
CFM 3
CFM 4
CFM 5
CFM 6

( BY OTHERS )
PUMP INTERLOCK
C1

COMPRESSOR ( B )

COMPRESSOR ( A )
LOAD SOLENOID VALVE
FAULT / ALARM RELAY
APCY-H Series - R-134a

ECONOMISER SOL. VALVE


F1 F2 F3

UNLOAD SOL. VALVE (%50)


1 2 3 C1
WFS

( BY OTHERS )
4

REMOTE START / STOP


( BY OTHERS )
5 6

7 FUSE
COM NO NC COM NO NC COM NO NC COM NO NC COM NO NC COM NO NC COM NO NC COM NO NC COM NO NC COM NO NC L1 L2 Gnd Com NO NC Com NO NC Com NO NC Com NO NC Com NO NC L1 L2 Gnd
AFT Menu 230V
8 RELAY1- RELAY2- RELAY3- RELAY4- RELAY5- RELAY6- RELAY7- RELAY8- RELAY9- RELAY10- POWER
RELAY1- RELAY2- RELAY3- RELAY4- RELAY5- POWER
SV1
Brown POWER INPUT

-485

CCH
FUSE
DISPLAY / KEYPAD Blue

+485
1
SPARE 2
Purple 3

SDA
FUSE RELAY OUTPUT EXPANSION BOARD 4
Yellow 5

SOLENOID VALVE ( %25 )


6

KEYPAD
SCL
230V 7
CR1 CR2
8
Black

GND
N
SKM Compact Screw Chillers

Red

12+V
RELAY6- RELAY7- RELAY8- RELAY9- RELAY10- MCS I / O

NC NO COM NC NO COM NC NO COM NC NO COM NC NO COM + - GND

MCB3 A B

A2 Gnd A1
2A

ANALOG OUTPUTS
MICROPROCESSOR
P 1
MAIN BOARD
12+ Volts

N 2
Red CR1 CR2

A4 Gnd A3
Red 3

ANALOG OUTPUTS
Green
- Gnd 12+ Gnd

Green 4
RS485-

White
+

White 5

CONTROLLER
Blue
Blue 6

MCS UC5011-
- Gnd

+
7 B

ELECTRONIC EXPANSION VALVE


MCS I/O

A
+

DIGITAL INPUTS
DI2 5+ DI1 5+
- 8

SENSOR 1 SENSOR 2 SENSOR 3 SENSOR 4 SENSOR 5 SENSOR 6 SENSOR 7 SENSOR 8 SENSOR 9 SENSOR 10 SENSOR 11 SENSOR 12
ANALOG ANALOG ANALOG ANALOG ANALOG ANALOG ANALOG ANALOG ANALOG ANALOG ANALOG ANALOG
DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL

DIGITAL INPUTS
DI4 5+ DI3 5+
ETHERNET
5+ Gnd SI 5+ Gnd SI 5+ Gnd SI 5+ Gnd SI 5+ Gnd SI 5+ Gnd SI 5+ Gnd SI 5+ Gnd SI 5+ Gnd SI 5+ Gnd SI 5+ Gnd SI 5+ Gnd SI CR3 SS C2
SPARE
FUSE
REMOTE

VMM
1.27K
4 / 1 Watt

VOLT FREE CONTACTS FOR VOLT FREE CONTACTS FOR VOLT FREE CONTACTS FOR
MP FAULT INDICATION REMOTE MODE INDICATION RUN INDICATION
ORANGE

OLM S
ENTERING LEAVING COMP. COMP. COMP. COMP. COMP. M1
AMBIENT
WATER WATER SUCTION DISCHARGE SUCTION DISCHARGE AMPS COMP. TEMP.
TEMP. TEMP. PRESSURE PRESSURE TEMP. TEMP. ( CT ) M2 WINDING TEMP.
BLUE
BROWN
YELLOW

33
SKM Compact Screw Chillers
APCY-H Series - R-134a
Power Entry Connections
Power Entry Connections
Power Supply Model APCY No. of Entry Points

5075 SH ~ 5365 TH ONE


380V/3PH/50HZ
5380 TH ~ 5520 TH TWO

5075 SH ~ 5395 TH ONE


415V/3PH/50HZ
5410 TH ~ 5520 TH TWO

5075 SH ~ 5425 TH ONE


440V/3PH/50HZ
5455 TH ~ 5520 TH TWO

6090 SH ~ 6375 TH ONE


380V/3PH/60HZ
6385 DH ~ 6510 TH TWO

6090 SH ~ 6425 TH ONE


460V/3PH/60HZ
6445 TH ~ 6510 TH TWO
Table 29

POWER
DISCONNECT
SWITCHES UNIT MOUNTED
(BY OTHERS) CONTROL PANEL

FIELD POWER
POWER POINT-2
SUPPLY TERMINAL
BOARD.

FIELD
POWER
POWER
POINT-1
SUPPLY
TERMINAL
BOARD.

FIELD
CONTROL CONTROL
SUPPLY SUPPLY

FIELD
POWER
SUPPLY

FIELD CONTROL
CONTROL
SUPPLY SUPPLY

(FOR SINGLE POINT POWER CONNECTION.


WITH BUILT-IN ISOLATOR - CONSULT SKM)

34
SKM Compact Screw Chillers
APCY-H Series - R-134a
Dimensional Data
APCY Models - 5075 SH APCY
, 5085Models - 5075SH
SH , 6090 SH,, 6100
5085 SH,
SH6090 SH, 6100 SH
LEGEND
01. COMPRESSOR
LEGEND 10 40.03 40.03 40.03 10

02. CONDENSER COIL MODEL P


[254] [1017] [1017] [1017] [254]

01. COMPRESSOR APCY


A1 A3 A5 A7
03. CONDENSER FAN
02. CONDENSER COIL
04. EVAPORATOR
03. CONDENSER FAN
05. CONTROL PANEL 5075 SH 05
04. EVAPORATOR 9.33
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL [237]
5085 SH
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE : 9.33
6090 SH
CONDENSER FAN & UNIT HEIGHT WILL [237]
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
CONDENSER FAN & UNIT HEIGHT WILL 6100 SH 10.31
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR [262] A2 A4 A6 A8

* 440V/3Ph/50Hz * 460V/3Ph/60Hz Table 30


THE POWER SUPPLY: 88.27 140.08 12
* 380V/3Ph/60Hz * 220V/3Ph/60Hz [305]
* 440V/3Ph/50Hz * 460V/3Ph/60Hz [2242] [3558]

* 380V/3Ph/60Hz * 220V/3Ph/60Hz 03

02

FILTERED
VENTILATION
BOTH SIDE
116.46
[2958]

DETACHABLE
PLATE FOR
CABLE ENTRY

STEEL WIRE
P

GUARD

01 04 C.W. OUT 5" C.W. IN 5" RIGGING HOLES


[125]

[DN 125] [DN 125]


4.92

4x Ø7/8 [22]
85.71 35.43 73.23
[2177] [900] [1860]

APCY SH
APCY Models - 5095 SH , 5115 Models - 5095
, 6120 SHSH, 5115 SH, 6120 SH
LEGEND
10 40.03 40.03 40.03 10
01. COMPRESSOR
LEGEND MODEL [254] [1017] [1017] [1017] [254]
A B P C.W. IN/OUT
02. CONDENSER COIL APCY A1 A3 A5 A7
01. COMPRESSOR
03. CONDENSER FAN 35.43 73.23 9.33 5"
02. CONDENSER COIL 5095 SH
04. EVAPORATOR [900] [1860] [237] DN 125
03. CONDENSER FAN 05
05. CONTROL PANEL 5115 SH 16.93 98.42 10.11 6"
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL 6120 SH [430] [2500] [257] DN 150
ALL DIMENSIONS ARE IN INCHES [mm]
Table 31
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
CONDENSER FAN & UNIT HEIGHT WILL
THE POWER SUPPLY: A2 A4 A6 A8
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY: 88.27 140.08 12
* 380V/3Ph/60Hz * 220V/3Ph/60Hz [2242] [3558] [305]
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
* 380V/3Ph/60Hz * 220V/3Ph/60Hz 03

02

FILTERED
VENTILATION
BOTH SIDE
116.46
[2958]

DETACHABLE
PLATE FOR
CABLE ENTRY

STEEL WIRE
P

GUARD

01 04 C.W. OUT C.W. IN RIGGING HOLES


[125]
4.92

4x Ø7/8 [22]
85.71 A B
[2177]

NOTE:
Evaporator Dimensions are subject to change without notice. Certified drawings will be provided upon request or at time of order.

35
SKM Compact Screw Chillers
APCY-H Series - R-134a
Dimensional Data
APCYSH
APCY Models - 6140 Models - 6140 SH
LEGEND
01. COMPRESSOR
LEGEND 10 42.08 42.08 42.08 42.08 10
[254] [1069] [1069] [1069] [1069] [254]
02. CONDENSER COIL
01. COMPRESSOR A1 A3 A5 A7 A9
03. CONDENSER FAN
02. CONDENSER COIL
04. EVAPORATOR
03. CONDENSER FAN 05
05. CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
CONDENSER FAN & UNIT HEIGHT WILL A2 A4 A6 A8 A10
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY:
* 380V/3Ph/60Hz * 220V/3Ph/60Hz 88.27 188.31 12
* 440V/3Ph/50Hz * 460V/3Ph/60Hz [2242] [4783] [305]
03
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
02

FILTERED
VENTILATION
BOTH SIDE
[2893]
113.9

DETACHABLE
PLATE FOR
CABLE ENTRY
10.11
[257]

STEEL WIRE
GUARD

01 04 C.W. OUT 6" C.W. IN 6" RIGGING HOLES


[DN 150] [DN 150]
[150]
5.91

4x Ø1 1/4 [32]
85.31 35.43 98.42
[2167] [900] [2500]

APCY Models - 5135 SH, 5150 SH, 6160 SH


APCY Models - 5135 SH , 5150 SH , 6160 SH
LEGEND
01. COMPRESSOR
LEGEND 10 42.08 42.08 42.08 42.08 10
[254] [1069] [1069] [1069] [1069] [254]
02. CONDENSER COIL
01. COMPRESSOR A1 A3 A5 A7 A9
03. CONDENSER FAN
02. CONDENSER COIL
04. EVAPORATOR
03. CONDENSER FAN 05
05. CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
CONDENSER FAN & UNIT HEIGHT WILL A2 A4 A6 A8 A10
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY: 88.27 188.31 12
* 380V/3Ph/60Hz * 220V/3Ph/60Hz [2242] [4783] [305]
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
03
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
02

FILTERED
VENTILATION
BOTH SIDE
117.44
[2983]

DETACHABLE
PLATE FOR
CABLE ENTRY
10.11
[257]

STEEL WIRE
GUARD

01 04 C.W. OUT 6" C.W. IN 6" RIGGING HOLES


[DN 150] [DN 150]
[150]
5.91

4x Ø1 1/4 [32]
85.31 35.43 98.42
[2167] [900] [2500]

NOTE:
Evaporator Dimensions are subject to change without notice. Certified drawings will be provided upon request or at time of order.

36
SKM Compact Screw Chillers
APCY-H Series - R-134a
Dimensional Data
APCY Models - 6175 SH
LEGEND
APCY Models - 6175 SH
01. COMPRESSOR
LEGEND 10 53.56 53.56 53.56 53.56 10
[254] [1360] [1360] [1360] [1360] [254]
02. CONDENSER COIL A1 A3 A5 A7 A9
01. COMPRESSOR
03. CONDENSER FAN
02. CONDENSER COIL
04. EVAPORATOR
03. CONDENSER FAN 05
05. CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
CONDENSER FAN & UNIT HEIGHT WILL A2 A4 A6 A8 A10
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY: 88.27 234.23 12
* 380V/3Ph/60Hz * 220V/3Ph/60Hz [305]
* 440V/3Ph/50Hz * 460V/3Ph/60Hz [2242] [5950]
03
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
02

FILTERED
VENTILATION
BOTH SIDE
[2893]
113.9

DETACHABLE
PLATE FOR
CABLE ENTRY
10.11
[257]

STEEL WIRE
GUARD

01 04 C.W. OUT 6" C.W. IN 6" RIGGING HOLES


[DN 150] [DN 150]
[150]
5.91

4x Ø1 1/4 [32]
85.31 70.87 98.42
[2167] [1800] [2500]

APCY Models - 5155 DH, 5165 DH, 5175 DH, 5185 DH


6185 DH, 6195 DH, 6205 DH
APCY
LEGEND Models - 5155 DH, 5165 DH, 5175 DH, 5185 DH, 6185 DH , 6195 DH , 6205 DH
10 53.56 53.56 53.56 53.56 10
01. COMPRESSOR
LEGEND [254] [1360] [1360] [1360] [1360] [254]
02. CONDENSER COIL A1 A3 A5 A7 A9
01. COMPRESSOR
03. CONDENSER FAN 05
02. CONDENSER COIL
04. EVAPORATOR
03. CONDENSER FAN
05. CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR A2 A4 A6 A8 A10
CONDENSER FAN & UNIT HEIGHT WILL
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz 88.27 234.23 12
THE POWER SUPPLY: [2242] [5950] [305]
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
* 440V/3Ph/50Hz * 460V/3Ph/60Hz 03

* 380V/3Ph/60Hz * 220V/3Ph/60Hz
02

FILTERED
VENTILATION
117.44
[2983]

BOTH SIDE

DETACHABLE
PLATE FOR
11.66
[296]

CABLE ENTRY
STEEL WIRE
GUARD

01 04 C.W. OUT 8" C.W. IN 8" RIGGING HOLES


[DN 200] [DN 200]
[150]
5.91

85.31 23.62 96.47 4x Ø1 1/4 [32]


[2167] [600] [2450]

NOTE:
Evaporator Dimensions are subject to change without notice. Certified drawings will be provided upon request or at time of order.

37
SKM Compact Screw Chillers
APCY-H Series - R-134a
Dimensional APCY
DataModels - 5195 DH, 5210 DH, 5230 DH
6220 DH, 6230 DH, 6240 DH
APCY
LEGEND
Models - 5195 DH , 5210 DH , 5230 DH , 6220 DH , 6230 DH , 6240 DH
01. COMPRESSOR
LEGEND 10 52.03 52.03 52.03 52.03 52.03 10
02. CONDENSER COIL [254] [1322] [1322] [1322] [1322] [1322] [254]

01.
03. COMPRESSOR
CONDENSER FAN
A1 A3 A5 A7 A9 A11

02. EVAPORATOR
04. CONDENSER COIL
05
03.
05. CONDENSER FAN
CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR A2 A4 A6 A8 A10 A12
CONDENSER FAN & UNIT HEIGHT WILL
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz 88.27 280.16 12
THE POWER SUPPLY: [2242] [7116] [305]
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
* 440V/3Ph/50Hz * 460V/3Ph/60Hz 03

* 380V/3Ph/60Hz * 220V/3Ph/60Hz
MODEL B 02
APCY

5195 DH
96.47
FILTERED
[2450] VENTILATION
119.41
[3033]

5210 DH BOTH SIDE

120.09
5230 DH
[3050] DETACHABLE
PLATE FOR
11.66
[296]

CABLE ENTRY
6220 DH
96.47 STEEL WIRE
GUARD
[2450]
6230 DH
01 04 C.W. OUT 8" C.W. IN 8" RIGGING HOLES
[DN 200] [DN 200]
[200]

120.09
7.87

85.12 31.5 B 8x Ø1 1/4 [32]


6240 DH [2162] [800]
[3050]
Table 32

APCY Models - 5250 DH, 5265 DH, 6260 DH, 6275 DH


APCY Models - 5250 DH , 5265 DH , 6260 DH , 6275 DH
LEGEND
01. COMPRESSOR
LEGEND 10 51.4 51.4 51.4 51.4 51.4 51.4 10
[254] [1305] [1305] [1305] [1305] [1305] [1305] [254]
02. CONDENSER COIL
01. COMPRESSOR A1 A3 A5 A7 A9 A11 A13
03. CONDENSER FAN
02. CONDENSER COIL
04. EVAPORATOR 05
03. CONDENSER FAN
05. CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
CONDENSER FAN & UNIT HEIGHT WILL A2 A4 A6 A8 A10 A12 A14
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz 328.39 12
THE POWER SUPPLY: 88.27
[305]
* 380V/3Ph/60Hz * 220V/3Ph/60Hz [2242] [8341]
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
03
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
02

FILTERED
VENTILATION
119.41
[3033]

BOTH SIDE

DETACHABLE
PLATE FOR
11.64
[296]

CABLE ENTRY
STEEL WIRE
GUARD

01 04 C.W. OUT 8" C.W. IN 8" RIGGING HOLES


[DN 200] [DN 200]
[200]

8x Ø1 1/4 [32]
7.87

85.12 62.99 120.09


[2162] [1600] [3050]

NOTE:
Evaporator Dimensions are subject to change without notice. Certified drawings will be provided upon request or at time of order.

38
SKM Compact Screw Chillers
APCY-H Series - R-134a
Dimensional Data
APCY ModelsAPCY
- 5285
ModelsDH, 5300
- 5285 DH,DH,6300
DH, 5300 DH,
6300 DH, 6320
6320 DH DH
LEGEND
10 59.05 59.05 59.05 59.05 59.05 59.05 10
01. COMPRESSOR
LEGEND [254] [1500] [1500] [1500] [1500] [1500] [1500] [254]
02. CONDENSER COIL A1 A3 A5 A7 A9 A11 A13
01. COMPRESSOR
03. CONDENSER FAN
02. CONDENSER COIL 05
04. EVAPORATOR
03. CONDENSER FAN
05. CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE : A2 A4 A6 A8 A10 A12 A14
BE DIFFERENT FROM THE LAYOUT FOR
CONDENSER FAN & UNIT HEIGHT WILL
THE POWER SUPPLY: 88.27 374.31 12
BE DIFFERENT FROM THE LAYOUT FOR [2242] [9507] [305]
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY: 03
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
* 380V/3Ph/60Hz * 220V/3Ph/60Hz 02

FILTERED
VENTILATION
119.41
[3033]

BOTH SIDE

DETACHABLE
[375]
14.76

PLATE FOR
CABLE ENTRY
STEEL WIRE
GUARD

01 04 C.W. OUT 10" C.W. IN 10" RIGGING HOLES


[DN 250] [DN 250]
[200]
7.87

8x Ø1 1/4 [32]
85.12 62.99 90.94
[2162] [1600] [2310]

APCY Models - 5285 TH, 5295 TH, 6285 TH, 6290 TH


APCY Models6300
- 5285 TH,TH,
TH, 6310 5295
6320TH,
TH 6285 TH, 6290 TH , 6300 TH, 6310 TH, 6320 TH
LEGEND
01. COMPRESSOR
LEGEND 10 59.05 59.05 59.05 59.05 59.05 59.05 10
02. CONDENSER COIL [254] [1500] [1500] [1500] [1500] [1500] [1500] [254]
01.
03. COMPRESSOR
CONDENSER FAN A1 A3 A5 A7 A9 A11 A13
02. EVAPORATOR
04. CONDENSER COIL
05
03.
05. CONDENSER FAN
CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
A2 A4 A6 A8 A10 A12 A14
CONDENSER FAN & UNIT HEIGHT WILL
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY:
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
88.27 374.31 14
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
[2242] [9507] [356]

03

02

JUNCTION
BOX
119.41
[3033]

DETACHABLE
PLATE FOR
[375]

CABLE ENTRY
14.76

FILTERED
VENTILATION
4-NOS.

01 04 C.W. OUT 10" C.W. IN 10" RIGGING HOLES STEEL WIRE


[200]

[DN 250] [DN 250]


7.87

85.12 102.36 112.6 8x Ø1 1/4 [32] GUARD


[2162] [2600] [2860]

NOTE:
Evaporator Dimensions are subject to change without notice. Certified drawings will be provided upon request or at time of order.

39
SKM Compact Screw Chillers
APCY-H Series - R-134a
Dimensional Data
APCY
APCYModels
LEGEND
- 5325
Models - 5325 DH,DH,5345
DH, 5345 DH,
6340 DH, 6340
6360 DH DH, 6360 DH
01. COMPRESSOR
LEGEND 10 57.18 57.18 57.18 57.18 57.18 57.18 57.18 10
02. CONDENSER COIL [254] [1452] [1452] [1452] [1452] [1452] [1452] [1452] [254]
01. CONDENSER
03. COMPRESSORFAN A1 A3 A5 A7 A9 A11 A13 A15
02.
04. CONDENSER
EVAPORATORCOIL 05
03.
05. CONDENSER FAN
CONTROL PANEL
04.
ALLEVAPORATOR
DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
CONDENSER FAN & UNIT HEIGHT WILL A2 A4 A6 A8 A10 A12 A14 A16
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY:
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
88.27 420.24 12
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
[2242] [10674] [305]
03

02

FILTERED
VENTILATION
119.41
[3033]

BOTH SIDE

DETACHABLE
[375]
14.76

PLATE FOR
CABLE ENTRY
STEEL WIRE
GUARD

01 04 C.W. OUT 10" C.W. IN 10" RIGGING HOLES


[DN 250] [DN 250]
[200]
7.87

8x Ø1 1/4 [32]
85.12 102.36 90.94
[2162] [2600] [2310]

APCY ModelsModels
APCY - 5310 TH, 5325 TH,
- 5310 TH,53455325
TH, 6345
TH,TH, 6355 TH,
5345 TH 6345 TH, 6355 TH
LEGEND
01. COMPRESSOR
LEGEND 10 57.18 57.18 57.18 57.18 57.18 57.18 57.18 10
02. CONDENSER COIL [254] [1452] [1452] [1452] [1452] [1452] [1452] [1452] [254]
01. COMPRESSOR
03. CONDENSER FAN A1 A3 A5 A7 A9 A11 A13 A15
02. CONDENSER COIL
04. EVAPORATOR 05
03. CONDENSER FAN
05. CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
CONDENSER FAN & UNIT HEIGHT WILL
THE POWER SUPPLY: A2 A4 A6 A8 A10 A12 A14 A16
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY:
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
88.27 420.24 14
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
[2242] [10674] [356]

03

02

JUNCTION
BOX
119.41
[3033]

DETACHABLE
PLATE FOR
CABLE ENTRY
[375]
14.76

FILTERED
VENTILATION
4-NOS.

01 04 C.W. OUT 10" C.W. IN 10" RIGGING HOLES STEEL WIRE


[DN 250] [DN 250]
[200]

8x Ø1 1/4 [32]
7.87

153.54 112.6 GUARD


85.12
[2162] [3900] [2860]

NOTE:
Evaporator Dimensions are subject to change without notice. Certified drawings will be provided upon request or at time of order.

40
SKM Compact Screw Chillers
APCY-H Series - R-134a
Dimensional Data
APCY
APCY Models - 6385 DH,
Models 6405 DH
- 6385 DH, 6405 DH
LEGEND
01. COMPRESSOR 10 56.06 56.06 56.06 56.06 56.06 56.06 56.06 56.06 10
LEGEND
[254] [1424] [1424] [1424] [1424] [1424] [1424] [1424] [1424] [254]
02. CONDENSER COIL
01. COMPRESSOR A1 A3 A5 A7 A9 A11 A13 A15 A17
03. CONDENSER FAN
02. CONDENSER COIL 05
04. EVAPORATOR
03. CONDENSER FAN
05. CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR A2 A4 A6 A8 A10 A12 A14 A16 A18
CONDENSER FAN & UNIT HEIGHT WILL
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY:
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
88.27 468.46 12
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
[2242] [11899] [305]
03

02

FILTERED
VENTILATION
117.83
[2993]

BOTH SIDE
14.76
[375]

DETACHABLE
PLATE FOR
CABLE ENTRY
STEEL WIRE
GUARD

01 04 C.W. OUT 10" C.W. IN 10" RIGGING HOLES


[DN 250] [DN 250]
[250]

8x Ø1 1/4 [32]
9.84

86.27 102.36 90.94


[2191] [2600] [2310]

APCY Models - 5365 TH, 5380 TH, 6375 TH, 6390 TH


APCY Models - 5365 TH, 5380 TH, 6375 TH, 6390 TH
LEGEND
01. COMPRESSOR
LEGEND 10 56.06 56.06 56.06 56.06 56.06 56.06 56.06 56.06 10
02. CONDENSER COIL [254] [1424] [1424] [1424] [1424] [1424] [1424] [1424] [1424] [254]
01. COMPRESSOR
03. CONDENSER FAN A1 A3 A5 A7 A9 A11 A13 A15 A17
02. CONDENSER COIL
04. EVAPORATOR
03. CONDENSER FAN 05
05. CONTROL PANEL
04. EVAPORATOR
ALL DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
CONDENSER FAN & UNIT HEIGHT WILL A2 A4 A6 A8 A10 A12 A14 A16 A18
THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY:
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
* 380V/3Ph/60Hz * 88.27
220V/3Ph/60Hz 468.46 14
[2242] [11899] [356]

03

02

JUNCTION
BOX
121.38
[3083]

DETACHABLE
PLATE FOR
14.76

CABLE ENTRY
[375]

FILTERED
VENTILATION
4-NOS.

01 04 C.W. OUT 10" C.W. IN 10" RIGGING HOLES STEEL WIRE


[DN 250] [DN 250] 8x Ø1 1/4 [32] GUARD
[250]

185.04 112.6
9.84

86.27
[2191] [4700] [2860]

NOTE:
Evaporator Dimensions are subject to change without notice. Certified drawings will be provided upon request or at time of order.

41
SKM Compact Screw Chillers
APCY-H Series - R-134a
Dimensional Data
APCY
APCYModels
LEGEND Models - 5395- TH,
5395 TH6410
5410 TH, , 5410
TH, 6425TH
TH , 6410 TH , 6425 TH
01. COMPRESSOR
LEGEND
10 54.93 54.93 54.93 54.93 54.93 54.93 54.93 54.93 54.93 10
[254] [1395] [1395] [1395] [1395] [1395] [1395] [1395] [1395] [1395] [254]
02. CONDENSER COIL
01.
03. COMPRESSOR
CONDENSER FAN A1 A3 A5 A7 A9 A11 A13 A15 A17 A19
02.
04. CONDENSER
EVAPORATORCOIL 05
03.
05. CONDENSER FAN
CONTROL PANEL
04.
ALLEVAPORATOR
DIMENSIONS ARE IN INCHES [mm]
05. CONTROL PANEL
ALL DIMENSIONS ARE IN INCHES [mm]
NOTE :
CONDENSER FAN & UNIT HEIGHT WILL
NOTE :
BE DIFFERENT FROM THE LAYOUT FOR
A2 A4 A6 A8 A10 A12 A14 A16 A18 A20

CONDENSER FAN & UNIT HEIGHT WILL


THE POWER SUPPLY:
BE DIFFERENT FROM THE LAYOUT FOR
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
THE POWER SUPPLY:
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
* 440V/3Ph/50Hz * 460V/3Ph/60Hz
88.27 514.39 14
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
APCY Models - 5425 TH, 5455 TH, 5475 TH, 5495 TH, 5520 TH
[2242] [13065] [356]
03
6445 TH, 6465 TH, 6480 TH, 6495 TH, 6510 TH
02
10 54.03 54.03 54.03 54.03 54.03 54.03 54.03 54.03 54.03 54.03 10
[254] [1372] [1372] [1372] [1372] [1372] [1372] [1372] [1372] [1372] [1372] [254]JUNCTION
BOX
A1 A3 A5 A7 A9 A11 A13 A15 A17 A19 A21
121.38
[3083]

DETACHABLE
05
PLATE FOR
14.76
[375]

CABLE ENTRY

FILTERED
VENTILATION
4-NOS.

01 04 C.W. OUT 10" C.W. IN 10" RIGGING HOLES STEEL WIRE


[DN 250] [DN 250] 8x Ø1 1/4 [32] GUARD
[250]
9.84

86.27 196.85 112.6


[2191] [5000] [2860]
A2 A4 A6 A8 A10 A12 A14 A16 A18 A20 A22

APCY Models - 5425 TH, 5455 TH, 5475 TH, 5495 TH, 5520 TH , 6445 TH, 6465 TH, 6480 TH,
APCY Models - 5425 TH, 5455 TH, 5475 TH, 5495 TH, 5520 TH
6495 TH, 6510 TH
6445 TH, 6465 TH, 6480 TH, 6495 TH, 6510 TH
10 54.03 54.03 54.03 54.03 54.03 54.03 54.03 54.03 54.03 54.03 10
[254] [1372] [1372] [1372] [1372] [1372] [1372] [1372] [1372] [1372] [1372] [254]

A1 A3 A5 A7 A9 A11 A13 A15 A17 A19 A21

05

A2 A4 A6 A8 A10 A12 A14 A16 A18 A20 A22

88.27 560.31 14
[2242] [14232] [356]

03

02
LEGEND
JUNCTION
BOX
01. COMPRESSOR
121.38
[3083]

02. CONDENSER COIL DETACHABLE


PLATE FOR
03. CONDENSER FAN CABLE ENTRY
P

04. EVAPORATOR FILTERED


VENTILATION
05. CONTROL PANEL 4-NOS.
ALL DIMENSIONS
C.W. OUT
ARE IN INCHES
C.W. IN
[mm] RIGGING HOLES STEEL WIRE
01 04 GUARD
8x Ø1 1/4 [32]
[250]

255.91 B
9.84

86.27
[2191] [6500]

MODEL B P C.W. IN/OUT LEGEND NOTE :


APCY
CONDENSER FAN & UNIT HEIGHT WILL
5425 TH
112.6
88.27 14.76 10" 01. COMPRESSOR 560.31 14
[2860]
[2242] [375] DN 250 BE DIFFERENT
[14232] FROM THE LAYOUT FOR [356]
02. CONDENSER COIL
5455 TH THE POWER SUPPLY:
03 03. CONDENSER FAN
5475 TH 04. EVAPORATOR * 440V/3Ph/50Hz * 460V/3Ph/60Hz
110.63 16.73
02 12"
[2810] [425] DN 300 05. CONTROL PANEL * 380V/3Ph/60Hz * 220V/3Ph/60Hz
5495 TH
ALL DIMENSIONS ARE IN INCHES [mm] JUNCTION
BOX
5520 TH
121.38
[3083]

DETACHABLE
6445 TH PLATE FOR
NOTE : CABLE ENTRY
P

6465 TH
CONDENSER FAN & UNIT HEIGHT WILL FILTERED
112.6 14.76 10" VENTILATION
6480 TH BE DIFFERENT FROM THE LAYOUT FOR 4-NOS.
[2860] [375] DN 250
6495 TH THE POWER SUPPLY: C.W. OUT C.W. IN RIGGING HOLES STEEL WIRE
01 04 GUARD
8x Ø1 1/4 [32]
[250]

255.91 B
9.84

86.27
6510 TH [2191] * 440V/3Ph/50Hz
[6500] * 460V/3Ph/60Hz
* 380V/3Ph/60Hz * 220V/3Ph/60Hz
NOTE: Table 33

Evaporator Dimensions are subject to change without notice. Certified drawings will be provided upon request or at time of order.

42
SKM Compact Screw Chillers
APCY-H Series - R-134a
CENTER OF GRAVITY

UNIT LENGHT

UNIT WIDTH
Y

ORIGIN 0,0
X

CENTER OF GRAVITY CENTER OF GRAVITY


MODEL X Y MODEL X Y MODEL X Y MODEL X Y
77.28 44.83 191.19 45.12 77.56 44.92 191.05 44.89
5075 SH 5295 TH 6090 SH 6310 TH
[1963] [1139] [4856] [1146] [1970] [1141] [4853] [1140]
77.52 45.03 200.07 41.51 77.25 44.04 198.33 41.18
5085 SH 5300 DH 6100 SH 6320 DH
[1969] [1144] [5082] [1054] [1962] [1119] [5038] [1046]
77.68 45.28 220.49 45.29 76.71 44.59 191.36 44.97
5095 SH 5310 TH 6120 SH 6320 TH
[1973] [1150] [5600] [1150] [1948] [1133] [4860] [1142]
77.61 45.68 231.68 41.30 99.99 45.25 230.11 41.62
5115 SH 5325 DH 6140 SH 6340 DH
[1971] [1160] [5885] [1049] [2540] [1149] [5845] [1057]
100.07 45.41 220.56 45.62 100.08 45.40 219.30 44.84
5135 SH 5325 TH 6160 SH 6345 TH
[2542] [1153] [5602] [1159] [2542] [1153] [5570] [1139]
100.71 45.93 232.78 41.16 120.14 45.66 218.92 44.91
5150 SH 5345 DH 6175 SH 6355 TH
[2558] [1167] [5913] [1045] [3052] [1160] [5561] [1141]
129.77 41.31 218.38 45.91 129.77 41.31 231.00 41.39
5155 DH 5345 TH 6185 DH 6360 DH
[3296] [1049] [5547] [1166] [3296] [1049] [5867] [1051]
130.08 41.42 242.75 45.84 130.08 41.42 244.85 45.16
5165 DH 5365 TH 6195 DH 6375 TH
[3304] [1052] [6166] [1164] [3304] [1052] [6219] [1147]
130.15 41.33 242.79 45.91 130.15 41.33 248.78 41.70
5175 DH 5380 TH 6205 DH 6385 DH
[3306] [1050] [6167] [1166] [3306] [1050] [6319] [1059]
130.53 41.49 263.72 45.88 153.36 41.61 244.65 45.47
5185 DH 5395 TH 6220 DH 6390 TH
[3315] [1054] [6699] [1165] [3895] [1057] [6214] [1155]
153.50 41.55 264.99 46.06 153.36 41.61 247.90 41.56
5195 DH 5410 TH 6220 DH 6405 DH
[3899] [1055] [6731] [1170] [3895] [1057] [6297] [1056]
155.40 42.23 307.27 46.13 153.24 41.07 263.65 45.68
5210 DH 5425 TH 6240 DH 6410 TH
[3947] [1073] [7805] [1172] [3892] [1043] [6697] [1160]
158.69 41.24 306.62 45.06 184.85 42.12 264.02 45.74
5230 DH 5455 TH 6260 DH 6425 TH
[4031] [1047] [7788] [1145] [4695] [1070] [6706] [1162]
187.38 41.77 306.44 45.12 186.91 41.71 305.85 45.73
5250 DH 5475 TH 6275 DH 6445 TH
[4759] [1061] [7784] [1146] [4748] [1059] [7768] [1161]
187.62 41.75 306.54 45.22 190.94 44.71 305.51 45.79
5265 DH 5495 TH 6285 TH 6465 TH
[4765] [1061] [7786] [1149] [4850] [1136] [7760] [1163]
199.30 41.72 305.96 45.29 191.17 44.77 307.10 45.96
5285 DH 5520 TH 6290 TH 6480 TH
[5062] [1060] [7771] [1150] [4856] [1137] [7800] [1167]
191.45 45.05 Table 34 191.25 44.83 307.39 46.13
5285 TH 6300 TH 6495 TH
[4863] [1144] [4858] [1139] [7808] [1172]
ALL DIMENSIONS ARE IN INCHES [mm] 197.76 41.49 306.45 46.29
6300 DH 6510 TH
[5023] [1054] [7784] [1176]
ALL DIMENSIONS ARE IN INCHES [mm] Table 35

43
SKM Compact Screw Chillers
APCY-H Series - R-134a
LOAD DISTRIBUTION ON MOUNTING POINTS - 50Hz
APCY Mounting Loads Operating
Units
Models A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 Weight
lbs 647 679 943 1026 1527 1203 1014 979 - - - - - - - - - - - - - - 8018
5075 SH
kg 293 308 428 465 692 546 460 444 - - - - - - - - - - - - - - 3636
lbs 647 679 950 1028 1564 1217 1022 982 - - - - - - - - - - - - - - 8089
5085 SH
kg 293 308 431 466 709 552 464 445 - - - - - - - - - - - - - - 3669
lbs 684 716 1004 1077 1605 1261 1151 1069 - - - - - - - - - - - - - - 8566
5095 SH
kg 310 325 455 488 728 572 522 485 - - - - - - - - - - - - - - 3885
lbs 769 927 1011 991 1847 1368 1260 1179 - - - - - - - - - - - - - - 9353
5115 SH
kg 349 421 458 449 838 621 571 535 - - - - - - - - - - - - - - 4242
lbs 730 769 968 1191 1742 1234 1651 1422 951 954 - - - - - - - - - - - - 11613
5135 SH
kg 331 349 439 540 790 560 749 645 431 433 - - - - - - - - - - - - 5267
lbs 733 772 970 1193 1872 1282 1752 1459 954 957 - - - - - - - - - - - - 11943
5150 SH
kg 332 350 440 541 849 581 794 662 433 434 - - - - - - - - - - - - 5416
lbs 1003 1223 1172 1366 1353 1753 1909 1880 1639 1621 - - - - - - - - - - - - 14918
5155 DH
kg 455 555 531 620 613 795 866 853 744 735 - - - - - - - - - - - - 6765
lbs 1003 1223 1172 1366 1353 1753 1941 1891 1660 1628 - - - - - - - - - - - - 14989
5165 DH
kg 455 555 531 620 613 795 880 858 753 738 - - - - - - - - - - - - 6798
lbs 1003 1223 1172 1366 1353 1753 1954 1923 1668 1648 - - - - - - - - - - - - 15061
5175 DH
kg 455 555 531 620 613 795 886 872 756 748 - - - - - - - - - - - - 6830
lbs 1005 1225 1174 1368 1355 1755 1998 1940 1697 1660 - - - - - - - - - - - - 15175
5185 DH
kg 456 556 532 621 614 796 906 880 770 753 - - - - - - - - - - - - 6882
lbs 980 1131 1195 1427 1307 1680 1234 1291 2227 2186 1420 1412 - - - - - - - - - - 17489
5195 DH
kg 444 513 542 647 593 762 559 585 1010 991 644 640 - - - - - - - - - - 7931
lbs 982 1134 1197 1429 1309 1683 1264 1303 2486 2280 1485 1437 - - - - - - - - - - 17990
5210 DH
kg 446 514 543 648 594 763 573 591 1127 1034 674 652 - - - - - - - - - - 8159
lbs 1014 1209 1234 1520 1211 1431 1277 1590 2594 2539 1670 1653 - - - - - - - - - - 18943
5230 DH
kg 460 548 560 689 549 649 579 721 1176 1151 758 750 - - - - - - - - - - 8591
lbs 845 803 1322 1759 1068 1159 1359 1766 1277 1392 2640 2544 1532 1511 - - - - - - - - 20977
5250 DH
kg 383 364 600 798 485 526 616 801 579 631 1197 1154 695 685 - - - - - - - - 9513
lbs 847 804 1324 1761 1070 1161 1361 1767 1282 1401 2666 2608 1539 1528 - - - - - - - - 21120
5265 DH
kg 384 365 600 799 485 526 617 802 581 635 1209 1183 698 693 - - - - - - - - 9578
lbs 893 850 1740 2461 1527 2149 1262 1474 2447 2327 2379 2280 1222 1225 - - - - - - - - 24235
5285 DH
kg 405 385 789 1116 692 975 572 668 1110 1055 1079 1034 554 556 - - - - - - - - 10991
lbs 953 887 1887 1771 2255 2504 2468 2540 1820 1699 2148 1602 1380 1384 - - - - - - - - 25298
5285 TH
kg 432 402 856 803 1023 1136 1119 1152 825 771 974 726 626 627 - - - - - - - - 11473
lbs 955 889 1918 1783 2296 2520 2469 2542 1821 1701 2150 1603 1382 1385 - - - - - - - - 25412
5295 TH
kg 433 403 870 809 1041 1143 1120 1153 826 771 975 727 627 628 - - - - - - - - 11525
lbs 895 851 1741 2463 1529 2151 1264 1475 2496 2448 2420 2382 1224 1227 - - - - - - - - 24565
5300 DH
kg 406 386 790 1117 693 975 573 669 1132 1110 1098 1080 555 556 - - - - - - - - 11141
lbs 926 860 1867 1447 1791 1692 2260 2425 1957 2329 1726 1657 2264 1589 1406 1410 - - - - - - 27606
5310 TH
kg 420 390 847 656 812 767 1025 1100 888 1056 783 751 1027 721 638 639 - - - - - - 12520
lbs 867 824 1294 1457 1507 2122 1576 2329 1102 1130 2737 2625 2227 2158 1223 1226 - - - - - - 26404
5325 DH
kg 393 374 587 661 683 963 715 1056 500 513 1241 1190 1010 979 555 556 - - - - - - 11975
lbs 928 862 1869 1449 1792 1694 2481 2506 2087 2376 1728 1659 2266 1591 1408 1411 - - - - - - 28107
5325 TH
kg 421 391 848 657 813 768 1125 1136 946 1078 784 752 1027 722 639 640 - - - - - - 12747
lbs 867 824 1294 1457 1507 2122 1576 2329 1102 1130 2771 2712 2250 2214 1223 1226 - - - - - - 26604
5345 DH
kg 393 374 587 661 683 963 715 1056 500 513 1257 1230 1020 1004 555 556 - - - - - - 12065
lbs 930 864 2066 1521 1949 1754 2488 2519 2093 2390 1731 1664 2268 1593 1410 1413 - - - - - - 28653
5345 TH
kg 422 392 937 690 884 796 1128 1142 949 1084 785 755 1028 722 640 641 - - - - - - 12995
lbs 950 884 1912 1461 1976 1461 1696 2113 2548 2188 2038 2529 2367 1611 1375 1255 1482 1485 - - - - 31331
5365 TH
kg 431 401 867 662 896 662 769 958 1155 992 924 1147 1073 731 624 569 672 673 - - - - 14209
lbs 952 886 1914 1462 1977 1462 1708 2118 2615 2213 2049 2534 2368 1612 1376 1256 1483 1486 - - - - 31473
5380 TH
kg 432 402 868 663 897 663 775 961 1186 1004 929 1149 1074 731 624 570 673 674 - - - - 14274
lbs 931 865 1701 1349 2204 1533 1314 1616 2579 2401 2047 2378 1537 1520 2344 1593 1238 1171 1517 1520 - - 33357
5395 TH
kg 422 392 771 612 999 695 596 733 1170 1089 928 1078 697 689 1063 723 561 531 688 689 - - 15128
lbs 932 866 1702 1350 2205 1534 1315 1618 2580 2402 2048 2379 1582 1537 2512 1654 1255 1178 1518 1521 - - 33687
5410 TH
kg 423 393 772 612 1000 696 596 734 1170 1089 929 1079 718 697 1139 750 569 534 688 690 - - 15278
lbs 915 849 1109 1107 1139 1144 1915 1391 1945 1653 1763 2281 2724 2419 1581 1744 1832 1399 2216 1515 1557 1560 35758
5425 TH
kg 415 385 503 502 517 519 869 631 882 750 799 1035 1236 1097 717 791 831 635 1005 687 706 708 16217
lbs 916 851 1110 1108 1140 1145 2035 1436 2117 1853 2012 2889 2915 2884 1706 2047 1833 1401 2217 1516 1558 1561 38250
5455 TH
kg 416 386 503 502 517 519 923 651 960 840 912 1310 1322 1308 774 929 831 635 1005 688 707 708 17347
lbs 968 903 1184 1182 1217 1223 2108 1508 2190 1925 2083 2961 2987 2957 1778 2120 1966 1499 2381 1624 1610 1613 39988
5475 TH
kg 439 409 537 536 552 555 956 684 993 873 945 1343 1355 1341 806 962 892 680 1080 736 730 732 18135
lbs 968 903 1184 1182 1217 1223 2108 1508 2190 1925 2102 2968 3092 2995 1800 2128 1966 1499 2381 1624 1610 1613 40188
5495 TH
kg 439 409 537 536 552 555 956 684 993 873 953 1346 1402 1358 816 965 892 680 1080 736 730 732 18226
lbs 968 903 1184 1182 1217 1223 2185 1537 2260 1955 2109 2983 3097 3007 1803 2136 1966 1499 2381 1624 1610 1614 40445
5520 TH
kg 439 409 537 536 552 555 991 697 1025 887 956 1353 1404 1364 818 969 892 680 1080 736 730 732 18342
Table 36

44
SKM Compact Screw Chillers
APCY-H Series - R-134a
LOAD DISTRIBUTION ON MOUNTING POINTS - 60Hz
APCY Mounting Loads Operating
Units Weight
Models A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22
lbs 647 679 943 1026 1527 1203 1014 979 - - - - - - - - - - - - - - 8018
6090 SH
kg 293 308 428 465 692 546 460 444 - - - - - - - - - - - - - - 3636
lbs 660 713 993 1137 1602 1312 1042 1031 - - - - - - - - - - - - - - 8489
6100 SH
kg 299 323 450 516 726 595 472 467 - - - - - - - - - - - - - - 3850
lbs 766 924 963 971 1614 1282 1183 1149 - - - - - - - - - - - - - - 8852
6120 SH
kg 347 419 437 441 732 582 536 521 - - - - - - - - - - - - - - 4014
lbs 692 731 918 1141 1645 1168 1564 1358 886 889 - - - - - - - - - - - - 10993
6140 SH
kg 314 331 416 518 746 530 709 616 402 403 - - - - - - - - - - - - 4985
lbs 730 769 968 1191 1742 1234 1651 1422 951 954 - - - - - - - - - - - - 11613
6160 SH
kg 331 349 439 540 790 560 749 645 431 433 - - - - - - - - - - - - 5267
lbs 731 711 1476 1434 2399 1695 1238 1387 1013 1016 - - - - - - - - - - - - 13099
6175 SH
kg 331 322 670 650 1088 769 561 629 460 461 - - - - - - - - - - - - 5941
lbs 1003 1223 1172 1366 1353 1753 1909 1880 1639 1621 - - - - - - - - - - - - 14918
6185 DH
kg 455 555 531 620 613 795 866 853 744 735 - - - - - - - - - - - - 6765
lbs 1003 1223 1172 1366 1353 1753 1941 1891 1660 1628 - - - - - - - - - - - - 14989
6195 DH
kg 455 555 531 620 613 795 880 858 753 738 - - - - - - - - - - - - 6798
lbs 1003 1223 1172 1366 1353 1753 1954 1923 1668 1648 - - - - - - - - - - - - 15061
6205 DH
kg 455 555 531 620 613 795 886 872 756 748 - - - - - - - - - - - - 6830
lbs 978 1130 1193 1425 1305 1679 1230 1284 2206 2134 1414 1398 - - - - - - - - - - 17375
6220 DH
kg 444 512 541 646 592 761 558 582 1000 968 641 634 - - - - - - - - - - 7880
lbs 980 1131 1195 1427 1307 1680 1234 1291 2227 2186 1420 1412 - - - - - - - - - - 17489
6230 DH
kg 444 513 542 647 593 762 559 585 1010 991 644 640 - - - - - - - - - - 7931
lbs 1009 1204 1230 1515 1206 1427 1271 1584 2232 2191 1542 1530 - - - - - - - - - - 17940
6240 DH
kg 458 546 558 687 547 647 576 718 1012 993 700 694 - - - - - - - - - - 8136
lbs 841 799 1318 1755 1065 1155 1355 1762 1255 1357 2473 2267 1489 1442 - - - - - - - - 20333
6260 DH
kg 382 362 598 796 483 524 615 799 569 615 1122 1028 675 654 - - - - - - - - 9221
lbs 843 801 1320 1757 1067 1157 1357 1764 1268 1388 2574 2519 1515 1504 - - - - - - - - 20834
6275 DH
kg 382 363 599 797 484 525 616 800 575 629 1167 1142 687 682 - - - - - - - - 9449
lbs 951 884 1861 1760 2217 2489 2371 2504 1761 1676 2055 1566 1378 1381 - - - - - - - - 24855
6285 TH
kg 431 401 844 798 1006 1129 1075 1136 799 760 932 710 625 626 - - - - - - - - 11272
lbs 951 884 1861 1760 2217 2489 2371 2504 1775 1681 2094 1580 1378 1381 - - - - - - - - 24927
6290 TH
kg 431 401 844 798 1006 1129 1075 1136 805 763 950 717 625 626 - - - - - - - - 11305
lbs 890 846 1736 2458 1523 2146 1259 1470 2303 2234 2257 2201 1219 1222 - - - - - - - - 23763
6300 DH
kg 403 384 787 1115 691 973 571 667 1044 1013 1024 998 553 554 - - - - - - - - 10777
lbs 951 884 1861 1760 2219 2490 2412 2518 1785 1685 2094 1580 1378 1381 - - - - - - - - 24998
6300 TH
kg 431 401 844 798 1006 1129 1094 1142 810 764 950 717 625 626 - - - - - - - - 11337
lbs 951 884 1884 1768 2249 2501 2412 2518 1785 1685 2094 1580 1378 1381 - - - - - - - - 25070
6310 TH
kg 431 401 854 802 1020 1134 1094 1142 810 764 950 717 625 626 - - - - - - - - 11370
lbs 891 848 1738 2459 1525 2148 1260 1472 2323 2282 2274 2241 1221 1224 - - - - - - - - 23906
6320 DH
kg 404 385 788 1115 692 974 572 668 1053 1035 1031 1016 554 555 - - - - - - - - 10842
lbs 952 886 1885 1769 2251 2502 2413 2520 1805 1693 2147 1600 1379 1382 - - - - - - - - 25184
6320 TH
kg 432 402 855 802 1021 1135 1094 1143 818 768 974 726 625 627 - - - - - - - - 11421
lbs 866 823 1293 1455 1505 2121 1574 2328 1101 1129 2592 2457 2134 2050 1221 1225 - - - - - - 25874
6340 DH
kg 393 373 586 660 683 962 714 1056 499 512 1176 1114 968 930 554 555 - - - - - - 11734
lbs 923 857 1825 1431 1759 1682 2261 2433 1959 2337 1620 1620 2017 1499 1404 1407 - - - - - - 27035
6345 TH
kg 419 389 828 649 798 763 1026 1104 888 1060 735 735 915 680 637 638 - - - - - - 12261
lbs 924 858 1866 1446 1791 1694 2263 2435 1960 2339 1622 1622 2019 1500 1405 1408 - - - - - - 27149
6355 TH
kg 419 389 846 656 812 768 1026 1104 889 1061 735 735 915 680 637 639 - - - - - - 12313
lbs 867 824 1294 1457 1507 2122 1576 2329 1102 1130 2647 2593 2170 2137 1223 1226 - - - - - - 26204
6360 DH
kg 393 374 587 661 683 963 715 1056 500 513 1200 1176 984 969 555 556 - - - - - - 11884
lbs 946 880 1747 1398 1785 1389 1649 2093 2279 2089 1981 2506 2298 1583 1360 1246 1477 1480 - - - - 30186
6375 TH
kg 429 399 792 634 809 630 748 949 1033 947 898 1136 1042 718 617 565 670 671 - - - - 13690
lbs 889 846 1269 1404 1557 2200 1563 2270 1150 1225 2194 2120 2725 2617 1154 1159 1269 1273 - - - - 28886
6385 DH
kg 403 384 576 637 706 998 709 1029 522 556 995 961 1236 1187 523 526 576 577 - - - - 13100
lbs 947 881 1748 1400 1787 1391 1693 2110 2545 2185 2023 2522 2300 1585 1361 1248 1479 1482 - - - - 30687
6390 TH
kg 430 400 793 635 810 631 768 957 1154 991 917 1144 1043 719 617 566 671 672 - - - - 13917
lbs 889 846 1269 1404 1557 2200 1563 2270 1150 1225 2218 2179 2758 2702 1154 1159 1269 1273 - - - - 29086
6405 DH
kg 403 384 576 637 706 998 709 1029 522 556 1006 988 1251 1225 523 526 576 577 - - - - 13191
lbs 927 861 1668 1334 2143 1509 1310 1613 2516 2376 2016 2365 1517 1510 2276 1567 1228 1165 1513 1516 - - 32929
6410 TH
kg 421 391 756 605 972 684 594 731 1141 1077 914 1072 688 685 1032 711 557 528 686 688 - - 14934
lbs 929 863 1669 1335 2144 1510 1312 1614 2517 2377 2017 2366 1535 1517 2341 1591 1235 1168 1514 1517 - - 33072
6425 TH
kg 421 391 757 606 972 685 595 732 1141 1078 915 1073 696 688 1062 722 560 530 687 688 - - 14999
lbs 912 846 1106 1104 1136 1141 1867 1371 1902 1635 1730 2267 2560 2357 1544 1728 1743 1364 2074 1461 1554 1557 34956
6445 TH
kg 414 384 501 500 515 517 847 622 862 741 784 1028 1161 1069 700 784 790 619 941 662 705 706 15853
lbs 913 847 1107 1105 1137 1142 1913 1389 1943 1651 1731 2268 2562 2358 1545 1729 1744 1366 2075 1462 1555 1558 35098
6465 TH
kg 414 384 502 501 516 518 868 630 881 749 785 1029 1162 1069 701 784 791 619 941 663 705 707 15918
lbs 914 848 1108 1106 1138 1143 1914 1390 1944 1652 1732 2269 2563 2359 1546 1730 1831 1398 2215 1514 1556 1559 35428
6480 TH
kg 415 385 502 501 516 518 868 630 882 749 785 1029 1162 1070 701 785 830 634 1004 687 706 707 16067
lbs 915 849 1109 1107 1139 1144 1915 1391 1945 1653 1763 2281 2724 2419 1581 1744 1832 1399 2216 1515 1557 1560 35758
6495 TH
kg 415 385 503 502 517 519 869 631 882 750 799 1035 1236 1097 717 791 831 635 1005 687 706 708 16217
lbs 916 850 1110 1108 1140 1145 2035 1435 2052 1693 1764 2282 2725 2420 1582 1745 1833 1400 2217 1516 1558 1561 36087
6510 TH
kg 415 386 503 502 517 519 923 651 931 768 800 1035 1236 1098 717 791 831 635 1005 688 707 708 16366
Table 37

45
SKM Compact Screw Chillers
APCY-H Series - R-134a
Sound Data - 50Hz
Sound Data - 50Hz

MODELS Sound power level in dB ref 10-12 W MODELS Sound pressure leve
Overall
Spectrum per octave band
APCY APCY
63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz dBA 63 Hz 125 Hz 250 H
5075 SH 107.2 93.5 92.0 88.9 87.8 86.6 79.7 72.9 93.9 5075 SH 96.2 82.5 81.0
5085 SH 107.2 93.5 92.1 89.1 88.1 87.1 80.2 73.2 94.2 5085 SH 96.2 82.5 81.1
5095 SH 108.0 94.3 93.0 89.9 89.2 88.3 81.5 74.1 95.3 5095 SH 97.0 83.3 82.0
5115 SH 108.0 94.3 93.1 90.1 89.6 88.9 82.0 74.3 95.6 5115 SH 97.0 83.3 82.1
5135 SH 109.2 95.5 94.3 91.0 90.6 89.6 82.8 74.7 96.6 5135 SH 98.2 84.5 83.3
5150 SH 109.2 95.5 94.4 91.2 91.0 90.1 83.4 74.9 97.0 5150 SH 98.2 84.5 83.4
5155 DH 110.2 96.5 95.0 91.9 90.8 89.6 82.7 75.9 96.9 5155 DH 99.2 85.5 84.0
5165 DH 110.2 96.5 95.1 92.0 91.0 89.9 83.0 76.1 97.1 5165 DH 99.2 85.5 84.1
5175 DH 110.2 96.5 95.1 92.1 91.1 90.1 83.3 76.2 97.3 5175 DH 99.2 85.5 84.1
5185 DH 110.2 96.5 95.2 92.3 91.4 90.6 83.8 76.6 97.6 5185 DH 99.2 85.5 84.2
5195 DH 111.0 97.3 96.0 92.9 92.2 91.3 84.5 77.1 98.3 5195 DH 100.0 86.3 85.0
5210 DH 111.0 97.3 96.0 93.0 92.4 91.6 84.8 77.2 98.5 5210 DH 100.0 86.3 85.1
5230 DH 111.0 97.3 96.1 93.1 92.6 91.9 85.0 77.4 98.7 5230 DH 100.0 86.3 85.1
5250 DH 111.7 98.0 96.7 93.6 93.1 92.2 85.4 77.5 99.2 5250 DH 100.7 87.0 85.7
5265 DH 111.7 98.0 96.8 93.7 93.3 92.4 85.7 77.6 99.3 5265 DH 100.7 87.0 85.8
5285 DH 112.2 98.5 97.3 94.1 93.8 92.9 86.1 77.8 99.8 5285 DH 101.2 87.6 86.3
5285 TH 112.2 98.5 97.2 94.3 93.5 92.6 85.8 78.5 99.6 5285 TH 101.2 87.6 86.2
5295 TH 112.2 98.5 97.3 94.4 93.7 92.9 86.1 78.8 99.8 5295 TH 101.2 87.6 86.3
5300 DH 112.2 98.5 97.4 94.2 94.1 93.2 86.4 77.9 100.0 5300 DH 101.2 87.6 86.4
5310 TH 112.8 99.1 97.8 94.8 94.1 93.3 86.4 78.9 100.2 5310 TH 101.8 88.1 86.8
5325 DH 112.8 99.1 97.9 94.6 94.6 93.6 86.8 78.2 100.5 5325 DH 101.8 88.1 86.9
5325 TH 112.8 99.1 97.8 94.8 94.2 93.4 86.6 79.0 100.3 5325 TH 101.8 88.1 86.8
5345 DH 112.8 99.1 98.0 94.7 94.7 93.9 87.1 78.3 100.7 5345 DH 101.8 88.1 87.0
5345 TH 112.8 99.1 97.9 94.9 94.3 93.6 86.8 79.1 100.4 5345 TH 101.8 88.1 86.9
5365 TH 113.2 99.5 98.3 95.2 94.7 93.9 87.1 79.2 100.8 5365 TH 102.2 88.5 87.3
5380 TH 113.2 99.5 98.3 95.2 94.8 94.0 87.2 79.3 100.8 5380 TH 102.2 88.5 87.3
5395 TH 113.6 99.9 98.7 95.5 95.2 94.2 87.5 79.4 101.2 5395 TH 102.6 88.9 87.7
5410 TH 113.6 99.9 98.8 95.6 95.3 94.4 87.7 79.5 101.3 5410 TH 102.6 88.9 87.8
5425 TH 114.0 100.3 99.1 95.9 95.7 94.7 88.0 79.6 101.6 5425 TH 103.0 89.3 88.1
5455 TH 114.0 100.3 99.2 95.9 95.8 94.9 88.2 79.7 101.7 5455 TH 103.0 89.3 88.2
5475 TH 114.0 100.3 99.2 96.0 96.0 95.1 88.4 79.8 101.9 5475 TH 103.0 89.3 88.2
5495 TH 114.0 100.3 99.3 96.1 96.1 95.3 88.6 79.9 102.0 5495 TH 103.0 89.3 88.3
5520 TH 114.0 100.3 99.3 96.2 96.2 95.5 88.8 80.0 102.2 5520 TH 103.0 89.3 88.3

Notes:
MODELS
Overall Sound pressure level in dB ref 2x10-5 Pa @ 1meter in free field Overall
Octave band sound values are non A-Weighted
Spectrum per octave band
APCY Pressure Level according to ISO 3744, full load operation at 95ºF (35ºC) ambient and 44ºF (6.7ºC) / 54ºF (12.2ºC) evaporator leaving and entering
Sound
Hz 4000 Hz 8000 Hz dBA 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz dBA
79.7 72.9 93.9 5075 SH 96.2 82.5 81.0 77.9 76.8 75.6 68.7 61.9 82.9
80.2 73.2 94.2 5085 SH 96.2 82.5 81.1 78.1 77.1 76.1 69.3 62.2 83.3
81.5 74.1 95.3 5095 SH 97.0 83.3 82.0 78.9 78.2 77.3 70.5 63.1 84.3
82.0 74.3 95.6 5115 SH 97.0 83.3 82.1 79.1 78.6 77.9 71.0 63.3 84.6
82.8 74.7 96.6 5135 SH 98.2 84.5 83.3 80.0 79.6 78.6 71.8 63.7 85.6
83.4 74.9 97.0 5150 SH 98.2 84.5 83.4 80.2 80.1 79.2 72.4 63.9 86.0
82.7 75.9 96.9 5155 DH 99.2 85.5 84.0 80.9 79.8 78.6 71.7 64.9 85.9
83.0 76.1 97.1 5165 DH 99.2 85.5 84.1 81.0 80.0 78.9 72.0 65.1 86.1
83.3 76.2 97.3 5175 DH 99.2 85.5 84.1 81.1 80.1 79.1 72.3 65.2 86.3
83.8 76.6 97.6 5185 DH 99.2 85.5 84.2 81.3 80.4 79.6 72.8 65.6 86.6
84.5 77.1 98.3 5195 DH 100.0 86.3 85.0 81.9 81.2 80.3 73.5 66.1 87.3
84.8 77.2 98.5 5210 DH 100.0 86.3 85.1 82.0 81.4 80.6 73.8 66.2 87.5
85.0 77.4 98.7 5230 DH 100.0 86.3 85.1 82.1 81.6 80.9 74.0 66.4 87.7
85.4 77.5 99.2 5250 DH 100.7 87.0 85.7 82.6 82.1 81.2 74.5 66.5 88.2
85.7 77.6 99.3 5265 DH 100.7 87.0 85.8 82.7 82.3 81.4 74.7 66.6 88.3
86.1 77.8 99.8 5285 DH 101.2 87.6 86.3 83.1 82.9 81.9 75.1 66.8 88.8
85.8 78.5 99.6 5285 TH 101.2 87.6 86.2 83.3 82.5 81.6 74.8 67.5 88.6
86.1 78.8 99.8 5295 TH 101.2 87.6 86.3 83.4 82.7 81.9 75.1 67.8 88.8
86.4 77.9 100.0 5300 DH 101.2 87.6 86.4 83.2 83.1 82.2 75.4 66.9 89.0
86.4 78.9 100.2 5310 TH 101.8 88.1 86.8 83.8 83.1 82.3 75.4 67.9 89.2
86.8 78.2 100.5 5325 DH 101.8 88.1 86.9 83.6 83.6 82.6 75.8 67.2 89.5
86.6 79.0 100.3 5325 TH 101.8 88.1 86.8 83.8 83.2 82.5 75.6 68.0 89.3
87.1 78.3 100.7 5345 DH 101.8 88.1 87.0 83.7 83.8 82.9 76.1 67.3 89.7
86.8 79.1 100.4 5345 TH 101.8 88.1 86.9 83.9 83.3 82.6 75.8 68.1 89.4
87.1 79.2 100.8 5365 TH 102.2 88.5 87.3 84.2 83.7 82.9 76.1 68.2 89.8
87.2 79.3 100.8 5380 TH 102.2 88.5 87.3 84.3 83.8 83.0 76.2 68.3 89.9
87.5 79.4 101.2 5395 TH 102.6 88.9 87.7 84.6 84.2 83.2 76.5 68.4 90.2
87.7 79.5 101.3 5410 TH 102.6 88.9 87.8 84.6 84.3 83.4 76.7 68.5 90.3
88.0 79.6 101.6 5425 TH 103.0 89.3 88.1 84.9 84.7 83.7 77.0 68.6 90.6
88.2 79.7 101.7 5455 TH 103.0 89.3 88.2 84.9 84.8 83.9 77.2 68.7 90.8
88.4 79.8 101.9 5475 TH 103.0 89.3 88.2 85.0 85.0 84.1 77.4 68.8 90.9
88.6 79.9 102.0 5495 TH 103.0 89.3 88.3 85.1 85.1 84.3 77.6 68.9 91.0
88.8 80.0 102.2 5520 TH 103.0 89.3 88.3 85.2 85.3 84.5 77.8 69.1 91.2
NOTE: Table 38

Octave
5ºC) ambient band
and 44ºF sound
(6.7ºC) / 54ºFvalues are non A-Weighted.
(12.2ºC) evaporator leaving and entering water temperatures.
Sound Pressure Level according to ISO 3744, full load operation at 95ºF (35ºC) ambient and 44ºF (6.7ºC) / 54ºF (12.2ºC) evaporator
leaving and entering water temperatures.

46
SKM Compact Screw Chillers
APCY-H Series - R-134a
Sound Data - 60Hz
Sound Data - 60Hz

MODELS Sound power level in dB ref 10-12 W MODELS


Overall
Spectrum per octave band
APCY APCY
63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz dBA 63 Hz
6090 SH 114.0 125.4 115.3 113.4 102.9 99.5 93.2 78.9 114.5 6090 SH 103.0
6100 SH 114.0 125.4 115.3 113.4 102.9 99.6 93.2 79.0 114.5 6100 SH 103.0
6120 SH 114.8 126.2 116.1 114.2 103.7 100.4 94.1 79.8 115.3 6120 SH 103.8
6140 SH 115.5 126.9 116.8 114.9 104.3 101.1 94.7 80.4 116.0 6140 SH 104.5
6160 SH 116.0 127.4 117.3 115.4 104.9 101.6 95.3 80.8 116.6 6160 SH 105.0
6175 SH 116.5 127.9 117.8 116.0 105.5 102.2 95.8 81.3 117.1 6175 SH 105.6
6185 DH 117.0 128.4 118.3 116.4 105.9 102.5 96.2 81.9 117.5 6185 DH 106.0
6195 DH 117.0 128.4 118.3 116.4 105.9 102.5 96.2 81.7 117.5 6195 DH 106.0
6205 DH 117.0 128.4 118.3 116.4 105.9 102.6 96.2 82.0 117.5 6205 DH 106.0
6220 DH 117.8 129.2 119.1 117.2 106.7 103.3 97.0 82.4 118.3 6220 DH 106.8
6230 DH 117.8 129.2 119.1 117.2 106.7 103.4 97.1 82.8 118.3 6230 DH 106.8
6240 DH 117.8 129.2 119.1 117.2 106.7 103.4 97.1 82.8 118.3 6240 DH 106.8
6260 DH 118.5 129.9 119.8 117.9 107.3 104.0 97.7 83.0 119.0 6260 DH 107.5
6275 DH 118.5 129.9 119.8 117.9 107.4 104.1 97.7 83.4 119.0 6275 DH 107.5
6285 TH 119.0 130.4 120.3 118.4 107.9 104.6 98.2 83.8 119.6 6285 TH 108.0
6290 TH 119.0 130.4 120.3 118.4 107.9 104.5 98.2 83.5 119.6 6290 TH 108.0
6300 DH 119.0 130.4 120.3 118.4 107.9 104.6 98.3 83.5 119.6 6300 DH 108.0
6300 TH 119.0 130.4 120.3 118.4 107.9 104.6 98.2 83.7 119.6 6300 TH 108.0
6310 TH 119.0 130.4 120.3 118.4 107.9 104.6 98.3 84.0 119.6 6310 TH 108.0
6320 DH 119.0 130.4 120.3 118.4 107.9 104.7 98.3 83.8 119.6 6320 DH 108.0
6320 TH 119.0 130.4 120.3 118.4 107.9 104.6 98.2 83.7 119.6 6320 TH 108.0
6340 DH 119.6 131.0 120.9 119.0 108.4 105.1 98.8 84.0 120.1 6340 DH 108.6
6345 TH 119.6 131.0 120.9 119.0 108.4 105.1 98.8 84.3 120.1 6345 TH 108.6
6355 TH 119.6 131.0 120.9 119.0 108.4 105.2 98.8 84.6 120.1 6355 TH 108.6
6360 DH 119.6 131.0 120.9 119.0 108.5 105.2 98.9 84.3 120.1 6360 DH 108.6
6375 TH 120.0 131.4 121.3 119.4 108.9 105.5 99.2 84.5 120.6 6375 TH 109.0
6385 DH 120.0 131.4 121.3 119.4 108.9 105.6 99.3 84.4 120.6 6385 DH 109.0
6390 TH 120.0 131.4 121.3 119.4 108.9 105.6 99.3 84.8 120.6 6390 TH 109.0
6405 DH 120.0 131.4 121.3 119.4 108.9 105.7 99.3 84.7 120.6 6405 DH 109.0
6410 TH 120.4 131.8 121.7 119.8 109.3 106.0 99.7 85.3 121.0 6410 TH 109.4
6425 TH 120.4 131.8 121.7 119.8 109.3 106.0 99.6 84.9 121.0 6425 TH 109.4
6445 TH 120.8 132.2 122.1 120.2 109.7 106.4 100.0 85.4 121.3 6445 TH 109.8
6465 TH 120.8 132.2 122.1 120.2 109.7 106.4 100.1 85.6 121.4 6465 TH 109.8
6480 TH 120.8 132.2 122.1 120.2 109.7 106.4 100.0 85.3 121.3 6480 TH 109.8
6495 TH 120.8 132.2 122.1 120.2 109.7 106.4 100.1 85.5 121.4 6495 TH 109.8
6510 TH 120.8 132.2 122.1 120.2 109.7 106.5 100.1 85.7 121.4 6510 TH 109.8

Notes:
MODELS Sound pressure level in dB ref 2x10-5 Pa @ 1meter in free field
Overall Octave band sound values are non A-Weighted Overall
Spectrum per octave band
Sound Pressure Level according to ISO 3744, full load operation at 95ºF (35ºC) ambient and 44ºF (6.7ºC) / 54ºF (12.2ºC) evaporator leaving and
APCY
00 Hz 8000 Hz dBA 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz dBA
93.2 78.9 114.5 6090 SH 103.0 114.4 104.3 102.4 91.9 88.5 82.2 67.9 103.5
93.2 79.0 114.5 6100 SH 103.0 114.4 104.3 102.4 91.9 88.6 82.2 68.0 103.5
94.1 79.8 115.3 6120 SH 103.8 115.2 105.1 103.2 92.7 89.4 83.1 68.8 104.3
94.7 80.4 116.0 6140 SH 104.5 115.9 105.8 103.9 93.4 90.1 83.7 69.4 105.0
95.3 80.8 116.6 6160 SH 105.0 116.4 106.3 104.4 93.9 90.7 84.3 69.8 105.6
95.8 81.3 117.1 6175 SH 105.6 117.0 106.9 105.0 94.5 91.2 84.9 70.3 106.1
96.2 81.9 117.5 6185 DH 106.0 117.4 107.3 105.4 94.9 91.5 85.2 70.9 106.6
96.2 81.7 117.5 6195 DH 106.0 117.4 107.3 105.4 94.9 91.5 85.2 70.7 106.5
96.2 82.0 117.5 6205 DH 106.0 117.4 107.3 105.4 94.9 91.6 85.2 71.0 106.6
97.0 82.4 118.3 6220 DH 106.8 118.2 108.1 106.2 95.7 92.3 86.0 71.4 107.3
97.1 82.8 118.3 6230 DH 106.8 118.2 108.1 106.2 95.7 92.4 86.1 71.9 107.4
97.1 82.8 118.3 6240 DH 106.8 118.2 108.1 106.2 95.7 92.4 86.1 71.9 107.4
97.7 83.0 119.0 6260 DH 107.5 118.9 108.8 106.9 96.3 93.0 86.7 72.1 108.0
97.7 83.4 119.0 6275 DH 107.5 118.9 108.8 106.9 96.4 93.1 86.8 72.4 108.0
98.2 83.8 119.6 6285 TH 108.0 119.4 109.4 107.5 96.9 93.6 87.2 72.9 108.6
98.2 83.5 119.6 6290 TH 108.0 119.4 109.4 107.5 96.9 93.5 87.2 72.5 108.6
98.3 83.5 119.6 6300 DH 108.0 119.4 109.4 107.5 96.9 93.6 87.3 72.5 108.6
98.2 83.7 119.6 6300 TH 108.0 119.4 109.4 107.5 96.9 93.6 87.2 72.7 108.6
98.3 84.0 119.6 6310 TH 108.0 119.4 109.4 107.5 96.9 93.6 87.3 73.0 108.6
98.3 83.8 119.6 6320 DH 108.0 119.4 109.4 107.5 97.0 93.7 87.3 72.8 108.6
98.2 83.7 119.6 6320 TH 108.0 119.4 109.4 107.5 96.9 93.6 87.2 72.7 108.6
98.8 84.0 120.1 6340 DH 108.6 120.0 109.9 108.0 97.4 94.1 87.8 73.0 109.1
98.8 84.3 120.1 6345 TH 108.6 120.0 109.9 108.0 97.4 94.1 87.8 73.3 109.1
98.8 84.6 120.1 6355 TH 108.6 120.0 109.9 108.0 97.5 94.2 87.8 73.6 109.1
98.9 84.3 120.1 6360 DH 108.6 120.0 109.9 108.0 97.5 94.2 87.9 73.3 109.1
99.2 84.5 120.6 6375 TH 109.0 120.4 110.3 108.4 97.9 94.6 88.2 73.6 109.6
99.3 84.4 120.6 6385 DH 109.0 120.4 110.3 108.4 97.9 94.6 88.3 73.4 109.6
99.3 84.8 120.6 6390 TH 109.0 120.4 110.3 108.4 97.9 94.6 88.3 73.8 109.6
99.3 84.7 120.6 6405 DH 109.0 120.4 110.3 108.4 97.9 94.7 88.3 73.7 109.6
99.7 85.3 121.0 6410 TH 109.4 120.8 110.7 108.8 98.3 95.0 88.7 74.3 110.0
99.6 84.9 121.0 6425 TH 109.4 120.8 110.7 108.8 98.3 95.0 88.6 73.9 110.0
00.0 85.4 121.3 6445 TH 109.8 121.2 111.1 109.2 98.7 95.4 89.1 74.4 110.4
00.1 85.6 121.4 6465 TH 109.8 121.2 111.1 109.2 98.7 95.4 89.1 74.6 110.4
00.0 85.3 121.3 6480 TH 109.8 121.2 111.1 109.2 98.7 95.4 89.0 74.3 110.4
00.1 85.5 121.4 6495 TH 109.8 121.2 111.1 109.2 98.7 95.4 89.1 74.5 110.4
00.1 85.7 121.4 6510 TH 109.8 121.2 111.1 109.2 98.7 95.5 89.1 74.7 110.4
Table 39
NOTE:
Octave
mbient and 44ºF (6.7ºC) band soundevaporator
/ 54ºF (12.2ºC) values are non
leaving A-Weighted.
and entering water temperatures.
Sound Pressure Level according to ISO 3744, full load operation at 95ºF (35ºC) ambient and 44ºF (6.7ºC) / 54ºF (12.2ºC) evaporator
leaving and entering water temperatures.

47
SKM Compact Screw Chillers
APCY-H Series - R-134a

Location And Space Requirements


SINGLE UNIT INSTALLATION
To enhance system performance and operating economy,
certain precautions should be followed before installation.

[2134]
84"
1. There should be no obstruction on the air discharge.

2. Unit must not be installed in a pit or near a parapet


wall that is taller than the unit height.

3. Orient the unit so that prevailing winds blow parallel to


unit length. If it is not practical to orient in this manner,
a wind deflecting shield should be considered.

4. Provide adequate clearance on all sides of the unit for


service access and avoid coil starvation. Refer to
figure below for recommended clearances. 60"
[1524]
60"
[1524]

[2134]
84"
Recommended Clearances
It is a necessity that the units are installed with adequate free space around them to ensure proper circulation of air that is rejected
by the condensers and to provide adequate space for unit access for servicing and maintenance. There is a possibility of recycling
of air if the rejected air from condenser encounters any obstacles leading to an increase in the ambient air temperature surrounding
the units.

Air distribution across the entire heat exchange area will be impaired if the air outlet is obstructed. These conditions lead to a
reduction in the heat exchange capacity of the coils causing an increase in discharge pressure of the compressors. This leads to a
loss of capacity & increase in compressor power input.

Units should not be completely shrouded with higher uninterupted wind shield in order to prevent reversing of airflow. In case,
such a configuration cannot be avoided , a properly designed exhaust duct or hood that does not influence any additional pressure
on the fans and which is of the same height as surrounding shield to be installed. For installation involving more than 3 chillers,
consult SKM for acceptable clearance.
MULTIPLE UNIT INSTALLATION
HEIGHT SHOULD BE LESS
THAN UNIT HEIGHT

HEIGHT

84" 122"
[2134] [3098]

60" 60"
[1524] [1524]

Figure A

Foundation
Provide a level and rigid concrete foundation or a steel platform that is strong enough to carry the operating weight of the unit.
SKM Air Conditioning is not liable for any damages and problems in the equipment caused by erroneous design in the foundation.

48
SKM Compact Screw Chillers
APCY-H Series - R-134a

Water Piping Practices


SKM suggests abiding by the local authorities’ chilled water piping recommendations and practices as they can provide the
installer the building and safety codes required for the installation.

Water piping should be designed to have a minimum number of bends and horizontal piping levels. Below are the following
components it should have:

1. Temperature and pressure gauges in entering and leaving chiller water piping for unit servicing and commissioning.
Pressure gauges must be installed on the same level.
2. Vibration eliminators in entering and leaving chilled water piping to lessen the sound and vibration transmitted to the
building.
3. Pipe strainer in the evaporator entering piping to protect the evaporator from water debris and maintain chiller efficiency.
4. Water flow switch in the leaving chilled water piping, wired to the terminals provided in the control panel, to make sure
that it has sufficient flow of water in the evaporator. This will prevent the evaporator from freezing up when the water flow is
interrupted and avoid compressor slugging on start-up.
5. To isolate the unit from the piping system when servicing or during maintenance, install a shut off valve on the entering
and leaving chilled water piping.
6. Expansion Tank provides additional space in the chilled water piping system as temperature rises and furthermore, it
maintains a positive pressure within the working limitations of the system.
7. Air Vents at high points in the chilled water system to bleed air from the system.
8. Vapor barrier on the outside of the insulation to avoid condensation in the cold surface of the pipe that may cause damage
on the building structure. A thorough leak test should be made before insulating the pipe.

Flush all chilled water piping before making the final connection to the unit. SKM recommends hiring services of water treatment
specialist to determine the type of necessary treatment. Improper or untreated chilled water leads to scaling, erosion, corrosion or
algae that can cause inefficient operation and tube damage. SKM will not be liable for damages caused by improper or untreated
chilled water.

Run the pumps 2 to 3 minutes before starting the chiller to ensure no freezing occurs that may damage the evaporator.

TYPICAL CHILLED WATER PIPING

TOR
O RA
V AP
EE
WA
TE
UB R
FL
&T OW
ELL
SH GUA
GE
RE
S SU R
RE TO
N +P INA
HO L IM
P E
SY IO
N
R
T
RA H INE
VIB ITC T RA
SW R
S
OW TE VEVE
FL WA L AL
VA EV
NG A T
I /G VE
NC VE AL
LA AL EV
BA V
FL

T
OW

WA LL A
BA E/G
TE A LV
R V
FL LL
OW BA

Figure B

49
SKM Compact Screw Chillers
APCY-H Series - R-134a

Vibration Isolation
It is recommended to install under the base of the unit a vibration isolation of rubber-in-shear or spring type for further reduction
of sound and vibration transmission to building structures . Vibration isolators must be correctly designed for each mounting loads
of the unit. Refer to unit certified drawing for operating weight at each mounting points.

Leveling Bolt

Upper Housing

Spring Cap
Anti Frictioner
Coil Spring
Lower Housing
Non skid pad

Detail-A

Note :
SKM can supply CAVM Spring type Anti-vibration mounts (optional). The CAVM has a deflection of 25mm and each rated load
can be distinguished easily as it is represented by different colours.

Water Loop Volume


In chilled water system, presence of sufficient volume of water in the piping system is crucial to achieve proper operation,
unfortunately, some systems will run with less water volume than needed, this will result in inconsistence system operation, and
uncontrolled compressor cycling, this condition is called “ short water loop”.

If our building for example didn’t provide enough water volume to achieve stable controls, a storage tank should be installed to
increase the water volume.

In a standard air conditioning application, the tank should be sized to attain at least 2 minute water loop and 2.5-4 minute water
loop for process cooling systems.

Having enough water loop time, hence enough water volume in the evaporator loop will prevent irregular compressor cycling,
which means smoother operation.

50
SKM Compact Screw Chillers
APCY-H Series - R-134a

Evaporator Water Flow Rate and Temperature Range

APCY-H Series can operate at wide evaporator temperature range, 8ºF (4.4ºC) - 16ºF (8.9ºC), within the water flow rate limits, and
is flexible enough to permit leaving water temperatures ranging from 41ºF (5ºC) - 48ºF (8.9ºC). The minimum and maximum water
flow rates of each evaporator are shown in the Evaporator Water Pressure Drop table.

Although in a lot of process cooling applications, it could be found that the flow rates or leaving temperatures are outside the
specified limits, however this can be solve by making changes in the chilled water piping arrangement.

51
SKM Compact Screw Chillers
APCY-H Series - R-134a
Unit Sizing Multiple Chiller Operation

It is strongly recommended to size the chiller for the present If the capacity requires installing more than one chiller unit or
load. For future expansion, it is recommended to install another where standby units are desired, units should be of equal size
chiller to meet the additional load demand. (or near) to ensure balanced water flow.

Over sizing of chillers by more than 10% at design conditions SKM recommends that water flow supply & return are connected
must be avoided. Over sizing causes energy inefficiency (more either parallel in case of range < 16°F (8.9°C) or in series if
power consumption), erratic system operation and shortened range > 16°F (8.9°C).
compressor life due to excessive cycling of compressors.

SKM Split Air Conditioners


APCY Series - R134a
Chilled Water Piping for Typical Multiple Chiller Installation
Chilled Water Piping for Typical Multiple Chiller Installation

CHILLER-1 CHILLER-2 CHILLER- - - - - - - N

LWT-1 EWT-1 LWT-2 EWT-2


SENSOR SENSOR SENSOR SENSOR
(FACTORY INSTALLED) (FACTORY INSTALLED) (FACTORY INSTALLED) (FACTORY INSTALLED)

WFS WFS

EWT - ENTERING WATER TEMPERATURE SENSOR


LWT - LEAVING WATER TEMPERATURE SENSOR COMMON LEAVING WATER LINE
WFS -WATER FLOW SWITCH (SKM SUPPLIED AS OPTION,FIELD INSTALLATION)
CHILLED WATER PIPING (BY CONTRACTOR & FIELD INSTALLATION)
COMMON ENTERING WATER LINE

Figure C

52
SKM Compact Screw Chillers
APCY-H Series - R-134a

GUIDE SPECIFICATIONS
GENERAL EVAPORATOR
The contractor shall supply and install factory assembled Evaporator shall be of direct expansion, shell & tube type with
air-cooled packaged water chillers, the number and capacity of removable head and 1, 2, or 3 refrigeration circuits. The bundle
which shall be as indicated in the capacity schedule shown on shall be made of copper tubes, expanded into steel tube sheets,
the drawings. with brass baffles located into a steel shell.

Each machine shall consist of at least one refrigerating circuit The evaporator shall be provided with water drain, air vent and
comprising of semi hermetic compact screw compressor(s), fittings for temperature sensors. The shell shall be insulated with
air-cooled condenser, evaporator, interconnecting refrigerant 1” (25mm) thick flexible closed cell insulation with a maximum
piping, controls, safety devices and accessories. K factor of 0.28 Btu.in/ft2.hr.°F (0.04 W/m.°K).

The machine shall be factory assembled, leak tested, evacuated The evaporator shall be designed for 239.3 psig (1650 kPa)
and completely charged with refrigerant R-134a. All factory wiring refrigerant side working pressure and 145 psig (1000 kPa)
and piping shall be contained within the machine enclosure. waterside working pressure.
All electrical components shall be protected from the weather.

Air cooled chillers shall be rated in accordance with AHRI-550/590. CONDENSER COIL
Each machine shall be capable of operating satisfactorily in a
wide range of ambient air temperatures ranging from 25°F (-4°C) Condenser coil shall be air cooled and shall be constructed
to 127.4°F (53 °C ). of seamless Hi-X copper tubes, maximum 3 rows deep, 3/8”
(9.52 mm) O.D. and mechanically bonded to the wavy type
Unless indicated otherwise on electrical wiring diagram, each aluminum fins .
unit shall be factory equipped to connect to only one electrical
power feeder with the necessary circuit breakers. Fins spacing shall be maximum 16 FPI (1.59 mm). Slit fins
shall not be accepted. Precoated fins shall be used for saline
Each unit shall be mounted on anti vibration isolators flexible and corrosive environment.
enough to dampen any vibrations.
The coils shall be tested against leakage by air pressure of
450 psig (3102 kPa) under water.

COMPRESSOR
CONDENSER FANS & MOTORS
Compressor shall be high performance and high efficiency screw
type. The compressor shall be driven by an electric motor in The machine shall be furnished with direct driven propeller type
a single housing. For stability and additional sound attenuation, discharging air upward condenser fans. Fans shall be constructed
the rotors shall be mounted in a double wall housing. of corrosion resistant blades such as heavy gauge aluminum. The
fan and drive shall be held in proper alignment. Fan assemblies
The compressor motor shall be refrigerant gas cooled. Each shall be provided with heavy gauge, rust resistant steel. The fan
compressor shall be mounted on anti-vibration mounts to minimize assembly shall be protected with an acrylic coated steel wire
vibration transmission. fan guard. All condenser fans shall be individually statically and
dynamically balanced for vibration free operation.
Compressor shall have discharge stop off valves, built in three-
stage oil separator, oil heater, oil sight glass, oil drain service Condenser fan motor shall be Totally Enclosed Air Over (TEAO),
valves and discharge check valve. 3-phase type, 6 poles with Class F insulation, Class B temperature
rise and IP55 protection. Also, Motor shall be with permanently
Compressor shall have automatic start unloading and shall have lubricated bearings and inherent corrosion resistance shaft.
infinite capacity control. Each compressor shall be provided with
safety devices including check valve in discharge gas outlet, Condenser fan motors shall be provided with individual 3 pole
motor winding temperature protection by integrated PTC sensors motor protector circuit breakers and contactor rated for AC3
in each winding, phase sequence protection for direction of duty operation.
rotation, discharge temperature protection, oil pressure and oil
level protection.
REFRIGERATION CIRCUITS
All compressors shall be provided with an individual 3 pole
MCCB for short circuit protection & Isolation. Individual 3 pole Refrigeration circuits piping shall be fabricated from ACR
contactors for switching of the compressors shall be rated for grade copper pipes and each refrigeration circuit shall include
AC3 duty. To reduce the starting inrush on the power supply a removable core filter drier, electronic expansion valve, and
system, compressors shall be provided with part winding start shut off valve.
or star-delta start depending on the models.

53
SKM Compact Screw Chillers
APCY-H Series - R-134a

GUIDE SPECIFICATIONS
Suction line shall be insulated with ½” (13mm) wall • Electronic expansion valve control boards.
thickness closed cell pipe insulation with maximum k factor
0.26 Btu.in/ft2.hr.°F (0.038 W/m.° K). • Control Relays.

• Control circuit on/off switch and pump down switches.


CASING
• Volt free contacts for run, common fault and auto mode
Machine casing shall be made of heavy gauge zinc coated indications.
galvanized steel sheets conforming to JIS-G 3302 and ASTM-
A 635. • Provision for accepting volt free contact for remote start/
stop.
To provide an extremely tough, scratch resistance, excellent
anti-corrosive protection, fabricated steel shall be thoroughly de- • Control terminal blocks and power terminal blocks/bus bars.
greased and then phosphatized before application of an average
60 micron backed electrostatic polyester dry powder coating in A Microprocessor must be provided to control the chiller as a
RAL 7032 color scheme. This finish shall pass 1000 hour, 5% standard. The controller shall provide the flexibility with set points
salt spray test at 95°F (35°C) and 95% relative humidity as per and control options that can be selected prior to the commisioning.
(ASTM B 117). The microprocessor shall provide a complete operational control
for the chiller and shall have built-in auto diagnostic capability
The machine shall be fully assembled on welded rigid structural that can signal off normal operation or alarm conditions as well
steel skid painted with one coat primer and minimum one coat as shutting down the chiller.
of rust-preventing black enamel.
The Master Micro Controller board shall have sensor inputs,
digital inputs, relay outputs 0-10 Vdc analog outputs, keypad,
CONTROL PANEL & CONTROLS graphics LCD with 2.8” diagonal viewing area, real time clock,
RS-232, RS-485 and ethernet communication ports.
Control panel enclosure shall be fabricated out of heavy gauge
steel in phosphatized, powder coated baked finish. The enclosure
shall be conformed to IP54 as per guidelines in IEC 529. A hinged The main features of the Controller shall be as
access door and key fastener shall be provided for easy access follows :
and security.

The control panel shall be ventilated using louvers and filters. • A large graphical display with backlit that can be seen in
The panel shall be factory wired in accordance with NEC 430 & bright or dim lighting..
440, labeled, tagged and have 1 phase, 220 / 240 V for controls.
• A user friendly nine button generic keypad.
Control Panel should include the following components as
minimum : • Battery backed up built-in real time clock to program two
start/step daily and provide the information of running hours
• Individual compressor and condenser fan motor contactors. of the compressors.

• Thermal magnetic circuit breakers for compressors and • A multiple level passwords for security.
condenser fan motors.
• Automatic lead/lag changeover of the compressors.
• Voltage monitoring module for protection against under
voltage, over voltage, phase loss, phase reversal and phase • Pump down at the beginning and end of every circuit cycle.
unbalance of the incoming voltage.
• Capacity control based on leaving chilled water temperature.
• Circuit breaker for control circuit.
• Remote Start/Stop facility through Volt Free Contact.
• Remote/Off/Local selector switch.
• Volt Free Contacts for common Run, Fault and Remote
• Microprocessor master board with graphical display. mode operation status.

• Microprocessor expansion boards as required.

54
SKM Compact Screw Chillers
APCY-H Series - R-134a

GUIDE SPECIFICATIONS
EASY ACCESSIBLE MEASUREMENTS SHALL THE FOLLOWING SYSTEM PROTECTION CONTROLS
INCLUDE THE FOLLOWING : SHALL AUTOMATICALLY ACT TO ENSURE SYSTEM
RELIABILITY AND PROTECTION OF THE UNIT THROUGH
• Status of the chiller. THE MICROPROCESSOR:

• Status of each circuit/compressor. • Low suction pressure protection.

• Status of condenser fans. • High discharge pressure protection.

• Leaving and Entering chilled water temperature. • High discharge temperature protection.

• Suction pressure and temperature for each refrigerant • Low discharge pressure protection.
circuit.
• Low oil pressure protection.
• Discharge pressure and temperature for each refrigerant
circuit. • Low oil level protection.

• Suction and discharge superheat for each refrigerant circuit. • High compressor motor winding temperature protection.

• Oil pressure for each compressor. • Low superheat protection.

• Winding temperature for each compressor. • High compressor ampere protection.

• Ampere draw for each compressor. • Compressor internal thermal protection.

• Expansion valve opening percentage. • Freeze protection.

• Ambient temperature. • Under voltage, over voltage, phase loss, phase reversal
and phase unbalance protection.
• All active set points.
• Chilled water flow loss protection.
• Run time for each compressor.
• Sensor error protection.
• Number of compressor starts.
• Pump down.
• Lockout and alarm status.
• Anti-recycle.
• Status of water flow switch, voltage monitor, compressor
internal motor protector, oil level switch, run/stop input and • Time delay between stages.
pump down switches.
• 4-Levels of passwords to restrict the intentional mishandling.
• Log of last 100 alarms.

• Lead compressor identification.

• Date and time.

• Graphs of all inputs and outputs.

55
SKM Compact Screw Chillers
APCY-H Series - R-134a
HEAD OFFICE
P.O Box: 6004
Sharjah, United Arab Emirates
Tel: +971 6 514 3333
Fax: +971 6 514 3300
Email: sales@skmaircon.com
Email: info@skmaircon.com

Spare Parts Division


Email: spareparts.skm@skmaircon.com

Service Centre
Email: aftersales.skm@skmaircon.com

REGIONAL OFFICES
United Arab Emirates Saudi Arabia (Production Facility)
Abu Dhabi SKM Air Conditioning Factory
P.O Box: 27788 Eastern province
Tel: +971 2 6445223 AD Dammam
Fax: +971 2 6445145 2nd industrial city
Email: abudhabisales.skm@skmaircon.com Abqiq main road Hail Street
Tel: +966 3 8123332 / 4 / 5
Al Ain
Fax: +966 3 8123337 / +966 3 8123092
Tel: +971 3 7619921
Email: saudifactory.skm@skmaircon.com
Fax: +971 3 7619941
Email: alainsales.skm@skmaircon.com Egypt
Dubai 9 Mosadak Street,
P.O Box: 98822 3rd floor, Dokki, Giza
Tel: +971 4 2940900 Tel: +20 2 37619617 / +20 2 37621974
Fax: +971 4 2940029 Fax: +20 2 37621973
Email: dubaisales.skm@skmaircon.com Email: egyptsales.skm@skmaircon.com

Kuwait Algeria
Dasman Aissat Idir ( EX-ENMA) City
P.O Box: 1215-PC 15463 Bldg1, Flat 2, Dar El Beida Algiers
Tel: +965 2 2492200 Tel: +213 21 508197
Fax: +965 2 2494400 Fax: +213 21 508197
Email: kuwaitsales.skm@skmaircon.com Email: algeriasales.skm@skmaircon.com

For SKM Distributors visit:


www.skmaircon.com

116/2016
56 Supersedes # 116/2015

Você também pode gostar