Escolar Documentos
Profissional Documentos
Cultura Documentos
nom OD wt ID class
4.00 4.80 0.26 4.28 51
6.00 6.90 0.28 6.34 51
8.00 9.05 0.30 8.45 51
10.00 11.10 0.32 10.46 51
12.00 13.20 0.34 12.52 51
14.00 15.30 0.36 14.58 51
16.00 17.40 0.37 16.66 51
18.00 19.5 0.38 18.74 51.00
20.00 21.60 0.39 20.82 51
24.00 25.82 0.41 25.00 51
36.00 38.30 0.48 37.34 51
nom OD wt ID class
4.00 Not Available - 50 350 ?
6.00 6.90 0.25 6.40 50
8.00 9.05 0.27 8.51 50
10.00 11.10 0.29 10.52 50
12.00 13.20 0.31 12.58 50
14.00 15.30 0.33 14.64 50
16.00 17.40 0.35 16.70 50 8.7
18.00 19.50 0.35 18.80 50
20.00 21.60 0.36 20.88 50
24.00 25.82 0.38 25.06 50
36.00 38.30 0.43 37.44 50
http://www.acipco.com/adip/pipe/pressures-weights/weights-specials.cf
Weight in Po
Wall
Thickness Thickness Per Foot
Size in. Class in. Plain End
18 50 0.35 64.4
pressures-weights/weights-specials.cfm
Weight in Pounds
FASTITE MECHANICAL
Per Per
Per FootJOINT
Nominal** JOINT*
Per Foot Nominal**
Inc. Bell Length Inc. Bell Length
68 1365 - -
IPS sizes
11
160 psi
10.75 8.7960 0.9770 11.00
10.75 8.7178 1.01608 10.58 The WALL thickness is calculated as the minimum WAL
10.75 8.6788 1.03562 10.38 Driscopipe - The WALL thickness is calculated as the mi
1.06
12 12.75 11.1600 0.795 16.04 Driscopipe - The WALL thickness is calculated as the mi
0.75
0% 2 2.38 2.0950 0.1400 16.96
4% 2.38 2.0838 0.1456 16.31 The WALL thickness is calculated as the minimum WAL
6% 2.38 2.0782 0.1484 16.00 Driscopipe - The WALL thickness is calculated as the mi
id = od - 2,12 * (od/dr)
for 10" sdr 17 pipe this gives:
###
Pipe weights are calculated in accordance with PPI TR-7. Average inside diameter calculated using nominal Pressure Ratings are for water
OD and minimum wall plus 6% for use in estimating fluid flows. Actual ID will vary. When designing components service temperature, rat
to fit the pipe ID, refer to pipe dimensions and tolerances in applicable pipe specifications. Manual for Chemical and Environmental Consid
17
100 psi
2 2.375 2.0950 0.1400 16.96
2.375 2.0838 0.1456 16.31 The WALL thickness is calculated as the minimum WAL
2.375 2.0782 0.1484 16.00 Driscopipe - The WALL thickness is calculated as the mi
1.06
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ominal Pressure Ratings are for water at 73.4 °F. For other fluid and
g components service temperature, ratings may differ. Refer to Engineering
r Chemical and Environmental Considerations.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
ss is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
ALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.