Escolar Documentos
Profissional Documentos
Cultura Documentos
SCOPE :
The yellow Colour Rubber in the Infinity Wheel Stopper is subject to getting Dirty or Discolouring over
a period of time depending on the conditions of installation. This method statement is describes the
regular maintenance schedule for Infinity Wheel stopper. This scope of work shall include regular
maintenance and painting system of Yellow colour parts.
TOOLS:
Road marking Paint - White, Road Marking Paint – Yellow, Fine Emery, Soap Solution ( not detergent)
Cleaning Cloth, Roller Brush, Paint Brush etc.
SAFETY
Personnel Protective Equipment such as Respiratory mash, Safety Shoes, Face mash Hard Hat etc. shall
be worn at the time of painting.
Proper access to the work area shall be maintained through out the working period.
PROCEDURE :
REGULAR MAINTENANCE
The wheel stopper to be cleaned with water at regular intervals to wash out any dirt on the wheel
stoppers and to prevent any spilled chemicals or petrol staying on the Rubber and reacting with the
Rubber with time.
No cleaning Solvent is to be used when cleaning the Infinity Wheel stopper as they may react with
Rubber.
Inspect the condition of Wheel stopper Rubber surface and fixing condition and fixing Bolt.
If required tighten the Bolt or change new one where ever necessary.
When Yellow Colour fades or discolours, the yellow strip is to be repainted using road marking paint.
PAINTING PROCEDURE
PRECAUTIONS:
Maintain containers used in mixing and application of paint in a clean condition, free from foreign
materials and residue.
Stir the paint before application to produce the mixer uniform density, stir as required during
application. Do not stir surface film in to materials. Remove film and if necessary, strain materials before
using.
Don’t paint over dirt, rust, scale, grease, moisture.
Don’t apply succeeding coats until the previous coat has dried properly.