Escolar Documentos
Profissional Documentos
Cultura Documentos
SEBASTIAN OCAMPO
SENA
2018
ii
TABLA DE CONTENIDO
“In this post, I will discuss about how to create a network (LAN) with 2 small computer using UTP
cable. For that you need to prepare the UTP cable and RJ-45 Jack is already installed and the
network card in each computer. Normally computers are now equipped with Lan Card on the
computer motherboard. If no you can buy it at a computer store along with UTP cable and RJ-45
Jack.
If only connect 2 computers, you do not need a hub or switch. However, the cord is slightly
different configuration. If you create a network for 2 computers without using a hub or switch, the
configuration used is immune from Cross cable. Conversely, if use traditional a hub or switch, to
create a network of more than 2 computers, the configuration of the cable wire used is Straight.
Ok I just discussed about how to create a network (Lan) for connecting 2 computers…” 1
In this text the author explains the steps for create a network easily, he uses technical
vocabulary understandable.
Already: Ya
Equipped: Equipado
Wire: Cable
Cross: Cruzar
Switch: Intercambiar
Normally: Normalmente
Just: Solamente
Hub: Centro
Jack: Plug
Immune: Inmune
Motherboard: Tarjeta madre
Conversely: A la inversa
Straight: Derecho
Along: A lo largo
b. Direct translation: We translate the text without help trying understand some words
possible.
c. To write words unknown: After to read the document, we write words don't
understand for analyze it.
d. Dictionary meaning: in this step, we research with dictionary's help translation word
to word unknown.
4
BIBLIOGRAPHY
Webpage: http://usuirehardik.blogspot.com.co/2011/03/padapoting-ini-ini-saya-akan-
membahas.html