Escolar Documentos
Profissional Documentos
Cultura Documentos
Tenderers are required to provide below technical data of the material, apparatus or equipment
they are offering.
They shall submit together with this schedule, leaflets and catalogues of every item of material,
apparatus or equipment where catalogue number of other reference is indicated on the schedule.
Tenderers shall note that it is not sufficient to just indicate UK made, local made or Malaysian
made for the material or equipment they are offering. They must state clearly the names of the
makers or manufacturers as well as other information which are required.
Tenderers shall note also that their tenders will not be considered if the information required by
this schedule is not supplied at the time of tendering.
A ELECTRICAL
b) Manufacturer of Cubicle
Weight of Cubicle
d) Electrical Performance
Busbar dimensions
Type of insulation
Manufacturer
Model or Type No
Breaking Capacity
S2.1
SCHEDULE 2
f) IDMT Relays
Reference number(s) of
Characteristic curves
g) Current Transformers
Maker
Class
Ratio
Class
Ratio
h) Measuring Instruments
Maker
S2.2
SCHEDULE 2
Factor Meter
a) Cables:
PVC insulated
b) Flexible Cords
S2.3
and sheathed
SCHEDULE 2
c) Cable Glands
d) Cable Boxes
a) Switches
one way
two way
one way
two way
intermediate
flushed mounted
surface mounted
surface metal-clad
S2.4
surface moulded
SCHEDULE 2
flush mounted
surface mounted
d) Miscellaneous Apparatus:-
Time switches
Lightning Preventors
Isolators
Earth Electrodes
Manufacturer
Model or Type No
Breaking capacity
1 sec (amps)
S2.5
3 sec (amps)
SCHEDULE 2
Manufacturer
7 Capacitor Element
Country of Manufacture
Insulation level:
S2.6
BS 1650 : 1970 (C)
Dielectric material
Crcapsulation material
SCHEDULE 2
8 Capacitor Step
Country of Manufacture
Measuring system:
- Type
- Voltage
Adjustable settings:
- No voltage reset
- Manual operation
10 Capacitor
S2.7
Maker and type
Country of manufacture
Electrical endurance
SCHEDULE 2
a) Manufacturer
b) Model No
c) Local Agent
S2.8
SCHEDULE 2 - MECHANICAL INSTALLATION
B SACCHARIFICATION PROCESS
Valve manufacturer
Valve type
Actuator manufacturer
Place of Manufacture
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
Thickness of tank
Manufacturer
S2.9
Type
Impeller material
Motor rating
Motor speed
Impeller diameter mm
SCHEDULE 2
Place of Manufacturer
(i) Pump
Impeller
Shaft
Seal
Head m
Impeller diameter mm
Type
Insulation Class
S2.10
Rated HP
Volt/Phase/
Cycle
Speed rpm
Type
Rated HP
SCHEDULE 2
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
Thickness of tank
Manufacturer
Type
Impeller material
Motor rating
S2.11
Motor speed
Impeller diameter mm
Place of Manufacturer
3c Dust Extractor
Manufacturer
Model No.
Capacity cmm
Place of Manufacturer
SCHEDULE 2
3c Dust Extractor
Manufacturer
Model No.
Capacity cmm
Place of Manufacturer
3d Conveyor
Manufacturer
Model
Capacity kg/min
Motor rating
Motor speed
Place of manufacture
(i) Pump
S2.12
Pump Capacity
Impeller
Shaft
Seal
Head m
Impeller diameter mm
SCHEDULE 2
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
3f Steam Ejector
Manufacturer
S2.13
Model
Capacity
Place of manufacture
Manufacturer
Material
Type
Place of manufacture
Capacity
SCHEDULE 2
Dimension
Thickness of tank
Manufacturer
Type
Impeller material
Motor rating
Motor speed
Impeller diameter mm
S2.14
Type of frequency invertor
Place of manufacture
4c Feed Pump
(i) Pump
Pump Capacity
Impeller
Shaft
Seal
Head m
Impeller diameter mm
SCHEDULE 2
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
S2.15
5a Detention Tank
Quantity 3
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
Thickness of tank
SCHEDULE 2
5b Feed Pump
(i) Pump
Pump Capacity
Impeller
Shaft
Seal
Head m
Impeller diameter mm
S2.16
(ii) Pump Motor
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
Type
Rated HP k/w
SCHEDULE 2
C FERMENTATION PROCESS
1a Antifoam Tank
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
Thickness of tank
S2.17
1b Antifoam Tank Mixer
Manufacturer
Type
Speed Range
Impeller material
Motor rating
Motor speed
Impeller diameter
Place of Manufacturer
1c Antifoam Pump
(i) Pump
SCHEDULE 2
Pump Capacity
Impeller
Shaft
Seal
Head m
Impeller diameter mm
S2.18
Make & Model No.
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
2a PGK Tank
Manufacturer
Material
Type
Place of manufacture
SCHEDULE 2
Capacity
Weight
Dimension
Thickness of tank
Manufacturer
Type
S2.19
Power absorbed (maximum)
Impeller material
Motor rating
Impeller diameter mm
Place of manufacture
2c PGK Pump
(i) Pump
Impeller
Shaft
Seal
Head m
SCHEDULE 2
Impeller diameter mm
Type
Insulation Class
Rated HP
S2.20
Volt/Phase/Cycle
Speed
Type
Rated HP
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
Thickness of tank
SCHEDULE 2
4a Fermenter Tank
Manufacturer
Material
Type
Place of manufacture
Capacity
S2.21
Weight
Dimension
Thickness of tank
Operating temperature
Operating pressure
Manufacturer
Type
Impeller material
Motor rating
Motor speed
Impeller diameter mm
Place of manufacture
SCHEDULE 2
(i) Pump
S2.22
Impeller
Shaft
Seal
Head m
Impeller diameter mm
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
Manufacturer
SCHEDULE 2
Type
Place of manufacture
Temperature range
S2.23
Manufacturer
Type
Place of manufacture
5 Cyclone
Manufacturer
Type
Place of manufacture
6a Yeast Tank
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
Thickness of tank
Manufacturer
Type
SCHEDULE 2
Impeller material
Motor rating
Motor speed
S2.24
Impeller diameter mm
Place of manufacture
(i) Pump
Impeller
Shaft
Seal
Head m
Impeller diameter mm
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
SCHEDULE 2
Type
S2.25
Rated HP
7 CENTRIFULGAL SEPERATOR
Model
Manufacturer
Capacity
Type
Place of manufacture
8a Broth Tank
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
Thickness of tank
(i) Pump
Impeller
SCHEDULE 2
Seal
Head m
S2.26
Impeller diameter mm
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight kg
Dimension
Thickness of tank
SCHEDULE 2
S2.27
(i) Pump
Pump Capacity
Impeller
Shaft
Seal
Head m
Impeller diameter mm
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
SCHEDULE 2
S2.28
D DISTILLATION PROCESS
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
Inlet temperature
Outlet temperature
Operating temperature
Operating pressure
1b ML Pump
(i) Pump
Impeller
Shaft
Seal
Head m
Impeller diameter mm
SCHEDULE 2
S2.29
ITEM DESCRIPTION DETAILS
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
1c COOLER PLATE
Number
Manufacturer
Type
Place of manufacture
Inlet temperature
Outlet temperature
2 Condenser EP3203
Manufacturer
Type
Place of manufacture
SCHEDULE 2
S2.30
ITEM DESCRIPTION DETAILS
Electrical characteristics
(V/PH/CYC/PF)
Method of starting
Weight kg
Dimension
Inlet temperature
Outlet temperature
Operating pressure
3 Chamber VP3204
Number
Manufacturer
Type
Place of manufacture
Weight kg
Dimension
Maximum temperature
Maximum pressure
Operating temperature
Operating pressure
S2.31
SCHEDULE 2
PC3205
4 Recycle Pump
(i) Pump
Impeller
Shaft
Seal
Head m
Impeller diameter mm
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
S2.32
SCHEDULE 2
E DEHYDRATION PROCESS
1 Heater
Number
Manufacturer
Type
Place of manufacture
Weight
Dimension
Inlet temperature
Outlet temperature
Operating pressure
Operating temperature
2 Strainer
Number
Manufacturer
Type
Place of manufacture
Manufacturer
Type
Place of manufacture
Weight
Dimension
Capacity
S2.33
Inlet temperature
SCHEDULE 2
Outlet temperature
Operating pressure
Operating Temperature
Manufacturer
Type
Place of manufacture
Method of starting
Weight
Dimension
Inlet temperature
Outlet temperature
Operating pressure
Manufacturer
Type
Place of manufacture
Weight
S2.34
Dimension
SCHEDULE 2
Maximum temperature
Maximum Pressure
Operating temperature
Operating pressure
6a Ethanol Tank
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight kg
Dimension
Thickness of tank
6b Delivery Pump
Number
(i) Pump
Impeller
Shaft
Seal
S2.35
Head m
Impeller diameter mm
SCHEDULE 2
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed
Type
Rated HP
7 Vacum Pump
(i) Pump
Impeller
Shaft
Seal
Head m
S2.36
Impeller diameter mm
SCHEDULE 2
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed
Type
Rated HP
8 Chiller Unit
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
S2.37
SCHEDULE 2
F UTILITY PROCESS
1a Cooling Tower
Type
Make
Country of manufacture
Model no.
Capacity
Flowrate
Fan - rpm/bhp
Motor - type
S2.38
- make
- model no.
- enclosure
- V/Ø/Hz
- rpm/hp
SCHEDULE 2
- method of starting
- FLA
- starting amps/LRA
Dry weight
Operating weight
Casing material
Fill material
Basin material
(i) Pump
Pump Capacity
Impeller
Shaft
Seal
Head
S2.39
Impeller diameter
Type
Insulation Class
SCHEDULE 2
Rated HP
Volt/Phase/Cycle
Speed
Type
Rated HP
1c Chiller Unit
Number
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
2a WC2O Tank
S2.40
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight
Dimension
Thickness of tank
SCHEDULE 2
2b Sending Pump
Number
(i) Pump
Pump Capacity
Impeller
Shaft
Seal
Head m
Impeller diameter mm
Type
Insulation Class
Rated HP
S2.41
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
SCHEDULE 2
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight kg
Dimension mm
Thickness of tank mm
(i) Pump
Pump Capacity
Impeller
Shaft
Seal
S2.42
Head m
Impeller diameter mm
Type
Insulation Class
Rated HP
SCHEDULE 2
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
Manufacturer
Type
Place of manufacture
4a Softener
Number
Manufacturer
Type
Place of manufacture
S2.43
4b Softerner Water Tank
Manufacturer
Material
Type
Place of manufacture
Capacity
Weight kg
Dimension mm
Thickness of tank mm
SCHEDULE 2
(i) Pump
Impeller
Shaft
Seal
Head m
Impeller diameter mm
Type
S2.44
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed rpm
Type
Rated HP
SCHEDULE 2
4d Softener Pump
(i) Pump
Impeller
Shaft
Seal
Head m
Impeller diameter mm
Type
S2.45
Insulation Class
Rated HP
Volt/Phase/Cycle
Speed
Type
Rated HP
5a Boiler
Manufacturer
SCHEDULE 2
Type
Place of manufacture
Operating pressure
Operating Temperature
Capacity
Dimension
Weight kg
Manufacturer
Type
Place of manufacture
6a Oil Tank
Manufacturer
S2.46
Material
Type
Place of manufacture
Capacity
Weight kg
Dimension mm
Thickness of tank mm
(i) Pump
SCHEDULE 2
Impeller
Shaft
Seal
Head m
Impeller diameter mm
Type
Insulation Class
Rated HP
Volt/Phase/Cycle
S2.47
Speed
Type
Rated HP
SCHEDULE 2
G VALVES
- manufacturer
- type
- place of manufacture
- rating (PN)
2 On Off Valves
- manufacturer
- type
- place of manufacture
- rating (PN)
S2.48
3 Solenoid Valve
- manufacturer
- type
- place of manufacture
- rating (PN)
4 Ball valve
- manufacturer
- type
- place of manufacture
- rating (PN)
5 Solenoid valve
- manufacturer
- type
- place of manufacture
- rating (PN)
SCHEDULE 2
- manufacturer
- type
- place of manufacture
- rating (PN)
7 Cock
- manufacturer
- type
- place of manufacture
- rating (PN)
S2.49
8 Boll Cock
- manufacturer
- type
- place of manufacture
- rating (PN)
9 Boll Valve
- manufacturer
- type
- place of manufacture
- rating (PN)
10 Gate Valve
- manufacturer
- type
- place of manufacture
- rating (PN)
SCHEDULE 2
- manufacturer
- type
- place of manufacture
- rating (PN)
12 Check Valve
- manufacturer
- type
- place of manufacture
S2.50
- rating (PN)
- manufacturer
- type
- place of manufacture
- rating (PN)
14 Safety Valve
- manufacturer
- type
- place of manufacture
- rating (PN)
15 Flame Arrester
- manufacturer
- type
- place of manufacture
- rating (PN)
SCHEDULE 2
- manufacturer
- type
- place of manufacture
- rating (PN)
17 Reducing Valve
- manufacturer
- type
S2.51
- place of manufacture
- rating (PN)
18 Filter
- manufacturer
- type
- place of manufacture
- rating (PN)
19 Flow indicator
- manufacturer
- type
- place of manufacture
- rating (PN)
20 Sight Glass
- manufacturer
- type
- place of manufacture
- rating (PN)
SCHEDULE 2
- manufacturer
- type
- place of manufacture
- rating (PN)
22 Steam Trap
- manufacturer
S2.52
- type
- place of manufacture
- rating (PN)
H PIPING
1 Stainless Steel
- manufacturer
- place of manufacture
- ratng (PN)
- type
2 Rubber pipe
- manufacturer
- place of manufacture
- ratng (PN)
- type
Signature: .....................................................................................................................................................
Address: .......................................................................................................................................................
S2.53
MECHANICAL AND ELECTRICAL SERVICES INSTALLATION FOR THE CONSTRUCTION AND COMPLETION OF T
1020/07/KCH
S2.54
S2.55
...................................
...................................
...................................
..................................
S2.56
CTION AND COMPLETION OF THE PROPOSED BIO-ETHANOL PILOT PLANT PROJECT, KUCHING
S2.57