Escolar Documentos
Profissional Documentos
Cultura Documentos
MUR3060PT
SWITCHMODE
Power Rectifiers
. . . designed for use in switching power supplies, inverters and as
free wheeling diodes, these state–of–the–art devices have the http://onsemi.com
following features:
• Ultrafast 35 and 60 Nanosecond Recovery Time ULTRAFAST
• 175°C Operating Junction Temperature RECTIFIERS
• High Voltage Capability to 600 Volts 30 AMPERES
• Low Forward Drop
200–600 VOLTS
• Low Leakage Specified @ 150°C Case Temperature
• Current Derating Specified @ Both Case and Ambient Temperatures
1 2
• Epoxy Meets UL94, VO @ 1/8″
• High Temperature Glass Passivated Junction 3 4
Mechanical Characteristics:
• Case: Epoxy, Molded 4
• Weight: 4.3 grams (approximately)
• Finish: All External Surfaces Corrosion Resistant and
Terminal Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
1
• Shipped 30 units per plastic tube 2
• Marking: U3020, U3040, U3060 3
TO–218AC
MAXIMUM RATINGS CASE 340D
STYLE 2
Please See the Table on the Following Page
MARKING DIAGRAM
AYWW
U30x0
A = Assembly Location
Y = Year
WW = Work Week
U30x0 = Device Code
x = 2, 4 or 6
ORDERING INFORMATION
http://onsemi.com
2
MUR3020PT, MUR3040PT, MUR3060PT
MUR3020PT
100 100
TJ = 150°C
TJ = 150°C 100°C 50
IR , REVERSE CURRENT ( µ A)
20 100°C
50 25°C 10
30 2
20 0.5
25°C
0.2
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
0.1
10 0.05
0.02
0.01
0 20 40 60 80 100 120 140 160 180 200
5
VR, REVERSE VOLTAGE (VOLTS)
14
1
12
dc
10
0.5
SQUARE WAVE
8
0.3
6
0.2 4
0.1 0
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 140 150 160 170 180
Figure 1. Typical Forward Voltage (Per Leg) Figure 3. Current Derating, Case (Per Leg)
14
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
16
I
dc (RESISTIVE LOAD) PK = π
12 14
IAV
RJA = 15C/W AS OBTAINED
USING A SMALL FINNED 12 I
10 HEAT SINK. (CAPACITIVE LOAD) PK = 5
IAV dc
SQUARE WAVE 10
8 10
8
6 dc 20
6
4 SQUARE WAVE
SQUARE WAVE 4
0 0
0 20 40 60 80 100 120 140 160 180 200 0 2 4 6 8 10 12 14 16
TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Current Derating, Ambient (Per Leg) Figure 5. Power Dissipation (Per Leg)
http://onsemi.com
3
MUR3020PT, MUR3040PT, MUR3060PT
MUR3040PT
100 100
TJ = 150°C
50
20
100°C
IR , REVERSE CURRENT ( µ A)
50 10
100°C 25°C
TJ = 150°C 25°C 5
30
2
1
20
0.5
0.2
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
10 0.1
0.05
0.02
0.01
5
0 50 100 150 200 250 300 350 400 450 500
14
1 dc
12
10
0.3 6
4
0.2
RATED VOLTAGE APPLIED
2
0.1 0
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 140 150 160 170 180
Figure 6. Typical Forward Voltage (Per Leg) Figure 8. Current Derating, Case (Per Leg)
14
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
16
I
dc (RESISTIVE-INDUCTIVE LOAD) PK = π
12 14 IAV
I dc
RJA = 15C/W AS OBTAINED (CAPACITIVE LOAD) PK = 5
10
USING A SMALL FINNED 12 IAV
HEAT SINK.
10
8
SQUARE WAVE 10
20 SQUARE WAVE
8
6 dc
6
4
SQUARE WAVE 4
TJ = 125°C
2 RJA = 40C/W
AS OBTAINED IN FREE AIR 2
WITH NO HEAT SINK.
0 0
0 20 40 60 80 100 120 140 160 180 200 0 2 4 6 8 10 12 14 16
TA, AMBIENT TEMPERATURE (C)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 9. Current Derating, Ambient (Per Leg) Figure 10. Power Dissipation (Per Leg)
http://onsemi.com
4
MUR3020PT, MUR3040PT, MUR3060PT
MUR3060PT
100 200
100
50
TJ = 150°C
IR , REVERSE CURRENT ( µ A)
50 20
10
TJ = 150°C 5
100°C
30
2
100°C 1
20
0.5
25°C 25°C
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
0.2
0.1
10
0.05
0.02
150 200 250 300 350 400 450 500 550 600 650
5
VR, REVERSE VOLTAGE (VOLTS)
16
1
I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 14
dc
12
SQUARE WAVE
10
0.5
0.3
6
0.2 4
0.1 0
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
140 150 160 170 180
vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (C)
Figure 11. Typical Forward Voltage (Per Leg) Figure 13. Current Derating, Case (Per Leg)
10
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
16
dc I dc
9
RJA = 16C/W AS OBTAINED (CAPACITIVE LOAD) PK = 5
FROM A SMALL TO–220
HEAT SINK. 14 IAV
8 10
12
7
SQUARE WAVE
6 10
20 SQUARE WAVE
5 8
4
dc 6 (RESISTIVE-INDUCTIVE LOAD)
3
IPK = π
SQUARE WAVE 4
I
2
TJ = 125°C AV
RJA = 60C/W
AS OBTAINED IN FREE AIR 2
1 WITH NO HEAT SINK.
0 0
0 20 40 60 80 100 120 140 160 180 200 0 2 4 6 8 10 12 14 16
TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 14. Current Derating, Ambient (Per Leg) Figure 15. Power Dissipation (Per Leg)
http://onsemi.com
5
MUR3020PT, MUR3040PT, MUR3060PT
D = 0.5
0.5
0.2
0.1
ZJC(t) = r(t) RJC
0.1 RJC = 1.5C/W MAX
0.05 P(pk)
0.01 D CURVES APPLY FOR POWER
0.05 t1 PULSE TRAIN SHOWN
READ TIME AT T1
t2
SINGLE PULSE TJ(pk) - TC = P(pk) ZθJC(t)
0.02
DUTY CYCLE, D = t1/t2
0.01
0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1K
t, TIME (ms)
1K
500
TJ = 25°C
C, CAPACITANCE (pF)
200
100
50
20
10
1 2 5 10 20 50 100
http://onsemi.com
6
MUR3020PT, MUR3040PT, MUR3060PT
PACKAGE DIMENSIONS
C
B Q E NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
U 4 MILLIMETERS INCHES
DIM MIN MAX MIN MAX
A A --- 20.35 --- 0.801
S L
B 14.70 15.20 0.579 0.598
C 4.70 4.90 0.185 0.193
1 2 3 D 1.10 1.30 0.043 0.051
K
E 1.17 1.37 0.046 0.054
G 5.40 5.55 0.213 0.219
H 2.00 3.00 0.079 0.118
J 0.50 0.78 0.020 0.031
K 31.00 REF 1.220 REF
L --- 16.20 --- 0.638
Q 4.00 4.10 0.158 0.161
S 17.80 18.20 0.701 0.717
D J U 4.00 REF 0.157 REF
H V 1.75 REF 0.069
V STYLE 2:
G PIN 1. ANODE 1
2. CATHODE(S)
3. ANODE 2
4. CATHODE(S)
http://onsemi.com
7
MUR3020PT, MUR3040PT, MUR3060PT
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
http://onsemi.com MUR3020PT/D
8
This datasheet has been download from:
www.datasheetcatalog.com