Escolar Documentos
Profissional Documentos
Cultura Documentos
1.1 For the SX-2000(A/T)R Server configuration, the Ethernet ports are defined as:
IMB HFR: eth1 and eth2
SX-2000 Server: eth0, eth1, eth2
Projector: Eth port
TMS Storage Server: Eth port
1.2 For the SX-2000TR/AR Server configuration, Data Transferred within the system are defined as:
Connection between IMB HFR eth2 SX-2000 Server eth1: playback transfer
Connection between SX-2000 Server eth0 Projector Eth port: communication
Connection between SX-2000 Server eth2 TMS Storage Server Eth port: TMS content transfer
Please See Figure 1 for connection diagram at bottom of page 2.
Supplied blue colored CAT6 cable in 3 Meters length is used for the connection from the SX-2000
server to the IMB HFR.
Page 1 of 2
GDC Technology Ltd.
3. Considerations
3.1 Note on IP Address:
a) Please confirm on the admin panel of the SMS interface that the Eth1 IP address is 192.168.1.13.
If this is not so, please contact GDC support staff.
a) "Failed connecting to SM" is due to the server eth0 and projector IP using 192.168.2.X IP, which can
confuse the projector routing with IMB internal 192.168.2.X IP.
b) Failed connecting to SM can be solved by changing projector IP and server eth0 to another range
(e.g. 192.168.0.X or 192.168.3.X).
a) To provide best connectivity, it is recommended to use a high quality CAT6 cable to connect the SX-
2000 server and the IMB HFR.
b) Please ensure that these cable ends are secured. As loose wires can greatly reduce speed.
Page 2 of 2