Você está na página 1de 1

Samriddhi data sheet

International Inc.
INDENTATION RESISTANCE TESTER / PENETROMETER TESTER

The procedure in accordance with these standards is used to determine the indentation resistance of plastic coated pipes and
formed pieces under the influence of weight and temperature.
The Indentation resistance tester(Bath) which is highly useful for testing of indentation hardness or penetration testing of coatings
for polypropylene PP and polyethylene PE coating material at above ambient temperature up to 90 deg cent.
The ability of coating to withstand penetration resistance or deformation force, without breaking through the coating into the
substrate.
It has indentation of a punch in the coating under fixed conditions of temperature and load.
FEATURES:
 Inner chamber made of Stainless steel
 Outer chamber Made of M.S. duly Powder coating
 Microprocessor based digital Temp. Controller (With Heating Bath)
 In build water circulating pump for Uniform temperature throughout the Bath (With Heating Bath)
 Digital timer
 Digital Thickness Gauge (Optional)

TECHNICAL PARAMETERS:
MODEL SIIN / IRT/4030 R SIIN / IRT/4030 H SIIN / IRT/4060 R SIIN / IRT/4060 H
TEST 3 TEST STATIONS 3 TEST STATIONS 6 TEST STATIONS 6 TEST STATIONS
CONSTRUCTION OF BATH Stainless steel
CONSTRUCTION OF ROD Stainless steel
BATH SIZE (INTERNAL) (W x D x H): 300 x 250 x 140 mm 300 x 250 x 180 mm 350 x 290 x 140 mm 350 x 290 x 180 mm
BATH SIZE (EXTERNAL) (W x D x H): 524 x 396 x 250 mm 524 x 396 x 280 mm 580 x 440 x 250 mm 580 x 440 x 280 mm
HEATER ------ 1000 Watts. ----- 1500 Watts.
DIGITAL TIMER RANGE 0 – 999.9 Hrs. 0 – 999.9 Hrs 0 – 999.9 Hrs 0 – 999.9 Hrs
SAMPLE DIMENSIONS (L x W x H): 60 x 20 x 20 mm (MAX.)
POWER 230 V / 50 Hz or 115 V / 60 Hz

MICROPROCCESOR BASE DIGITAL TEMP. CONTROLLER:


TEMP. RANGE ------ 0 0 ------ 0 0
5 C A.A.TO 90 C 5 C A.A.TO 90 C
TEMP. ACCURACY ------- 0 ------ 0
(+/-) 0.5 C (+/-) 0.5 C

BASIC UNIT WITHOUT TEST INDENTERS, WEIGHTS. AND DISPLACEMENT GAUGE:


ACCESSORIES:
PART NUMBER
IRT/4050 250 Gm. TEST INDENTOR WITH TEST DIE 1.8 mm (MADE OF STAINLESS STEEL)
IRT/4051 250 Gm. TESTINDENTOR WITH TEST DIE 2.5 mm (MADE OF STAINLESS STEEL)
IRT/4052 250 Gm. TEST INDENTOR WITH TEST DIE 100.0 mm (MADE OF STAINLESS STEEL)
IRT/4055 WEIGHT FOR LOAD 0.5 Kg. (MADE OF STAINLESS STEEL)
IRT/4056 WEIGHT FOR LOAD 1.0 Kg. (MADE OF STAINLESS STEEL)
IRT/4057 WEIGHT FOR LOAD 2.25 Kg. (MADE OF STAINLESS STEEL)
IRT/4064 WEIGHT FOR LOAD 4.453 Kg.(MADE OF STAINLESS STEEL)
IRT/4065 DISPLACEMENT GAUGE (DIAL) RANGE: 0 – 10 mm X 0.01 mm
IRT/4066 DISPLACEMENT GAUGE (DIGITAL) RANGE: 0 – 12 mm X 0.001 mm
CONFORMS TO DIN 30 670, DIN 30 671, DIN 30 672, DIN 30 674, ASTM G 17
Also available low temperature indentation resistance tester up to minus 5 deg cent.

Model is subject to change without notice.


AVAILABLE AT
Samriddhi International Inc.
405, New Sonal Industrial Estate, Link road,Malad (W), Mumbai – 64, INDIA.
Tele. +91-22-4004 5104, Email: info@samriddhiint.com, samriddhiint@gmail.com

Você também pode gostar