Você está na página 1de 2

Your thickener for

acidic formulations
Hostagel® PH1
Hostagel® PH1
Surfactant blend for acidic cleaners, e.g. bath & toilet cleaners. Hostagel® PH 1 thickens
HCl acid formulations and other acidic cleaners based on e.g. phosphoric, sulfamic and
sulfuric acid in the presence of chloride ions. Especially in combination with amine
oxides, Hostagel® PH1 thickened acidic formulations show a long-term storage stability
and low shear dependence.

Advantages
JJ Cost effective liquid thickener for acidic formulations
Hostagel® PH1: initial viscosity

JJ No need for additional surfactants, preservatives or disinfectants­­


3500
Initial Viscosity, 3.7% HCL active
JJ Simplified production, safe use
3000
20 rpm 50 rpm

viscosity (mPas)
JJ Processing at gentle heating
2500
2000
1500
Features 1000
JJ Hostagel® PH1 provides higher initial viscosity at comparable costs
500
JJ 2 % tel quel Hostagel® PH1 (as is) are sufficient to yield a viscosity
0
between 1000-2000 mPas 2% PH1/0.5% 2.5% PH1/0.5% 2% Market 2.5% Market 3% Market
Genaminox CSL Genaminox CSL Standard/0.5% Standard/0.5% Standard
JJ Use of amine oxide increases the detergency, provides foam and
Genaminox CSL Genaminox CSL

stabilizes color and viscosity


JJ A wide range of organic and inorganic acids can efficiently be

Hostagel® PH1: viscosity evolution in presence of


thickened in presence of Hostagel® PH1 5 % of different acids +5 % naCl
JJ Easy processing and filling of Hostagel® PH1 during production

2500
viscosity (mPas)

2% Hostagel PH1 (as is)


2000
Description 20 rpm
1500
Trade Name Hostagel® PH1
1000
Chemical Name Blend of amine components
500
Concentration [%] approx. 90

Appearance Dark yellow slightly brownish 0


viscous liquid at 20° C H3PO4 Amidosulfonic Citric Acid Acetic Acid Sulfuric
Acid Acid
Viscosity at 25° C [mPas] approx. 130

pH value tel quel (20° C) 8.5 – 10.0

Hostagel® PH1: viscosity evolution in presence of


5 % of different acids & 5 % hydrochloric acid
2000
2% Hostagel PH1 (as is) 20 rpm
Application 1800
viscosity (mPas)

JJ Hostagel® PH1 application concentrations of 2 – 3 % active easily 1600


allows achievement of customer’s target rheology profile 1400
JJ Additional use of surfactants, e.g. amine oxides increases detergency
1200
1000
and controlled foam formation of the end-product 800
JJ Reduced formulation costs due to lower active content as the viscosity
600
can be increased through higher acid levels 400
JJ Improved convenience: Hostagel® PH1 combines detergency 200
0
properties with rheology modification HCL only H3PO4 Amidosulfonic Citric Acid Sulfuric
Acid Acid

This information corresponds to the present state of our knowledge and * For sales to customers located within the United States and Canada
is intended as a general description of our products and their possible the following applies in addition:
www.industrialhomecare.clariant.com
applications. Clariant makes no warranties, express or implied, as to the NO EXPRESS OR IMPLIED WARRANTY IS MADE OF
information’s accuracy, adequacy, sufficiency or freedom from defect and THE MERCHANTABILITY, SUITABILITY, FITNESS FOR A Clariant International Ltd
assumes no liability in connection with any use of this information. Any user PARTICULAR PURPOSE OR OTHERWISE OF ANY BU Industrial & Consumer Specialties
of this product is responsible for determining the suitability of Clariant’s PRODUCT OR SERVICE.
products for its particular application. Rothausstrasse 61, CH-4132 Muttenz
* Nothing included in this information waives any of Clariant’s General Terms
and Conditions of Sale, which control unless it agrees otherwise in writing. ® Trademark of Clariant registered in many countries Commercial
Any existing intellectual/industrial property rights must be observed. Due to © 2013 Clariant International Ltd
possible changes in our products and applicable national and international
Phone: +41 61 469 7439
regulations and laws, the status of our products could change. Material
Safety Data Sheets providing safety precautions, that should be observed Application Development
when handling or storing Clariant products, are available upon request and Phone: +49 69 305 20743
are provided in compliance with applicable law. You should obtain and re-
view the applicable Material Safety Data Sheet information before handling
any of these products. For additional information, please contact Clariant.

home Care | Hard Surface Cleaning 06.2013

Você também pode gostar