Escolar Documentos
Profissional Documentos
Cultura Documentos
GENERAL NOTES :-
This Drawing is property of M&S. No part of this Drawing may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the M&S.
1. All dimensions are in mm.
2. All drawing should be read along with the relevant Architectural
Drawings.
6. Lap length for all bars shall be 50 times the dia of the bar unless
otherwise Specified
12. First stirrup in the beam is 50mm away from face of support.
C
2-Y12(Thro) 3-Y12(Thro) 2-Y12(Thro) C
Y8@200C/C Y8@200C/C
1 230x375
ISSUED FOR APPROVAL
RIGHT
ANY CHANGES MADE AFTER APPROVAL OF THESE DRAWINGS
MAY DELAY THE FABRICATION AND DELIVERY PROCESS.
2.
FABRICATION MAY PROCEED ON THE BASIS
RIGHT OF CORRECTIONS INDICATED.
LEFT
REVIEWED BY ___________________________
NAME
B _________________________ __________ B
SIGNATURE DATE
ENGINEERS :