Escolar Documentos
Profissional Documentos
Cultura Documentos
1
Innovation
and High Performance
• In-house research and development and dedicated
production facilities utilizing the latest technologies
• Expertise and competence in products and applications
• Optimized solutions for the customer
• High quality standards
• High degree of supply, reliability and service
2
We set the table for
your requirements
3
Manual, Electric and Multi-Post Units
General Description
• Complete ready-to-install Height Adjustable System
• Choose from 1 - 6 Cylinders
• Manual or Electric Operation
• Custom Systems Available
Technical Information
• System Capacity:
250 lbs. (113 kg) per Cylinder
1000 lbs. (450 kg) max. capacity on all Base Dyna-Lifts®
1500 lbs. (680 kg) maximum capacity on Heavy Duty Dyna-Lift® Systems
• Weight: Typical 2 Post Manual Unit with 16 Inch Stroke Cylinder:
10 Pounds (4.54 kg)
Typical 4 Post Manual Unit with 12 Inch Stroke Cylinder:
27 Pounds (12.25 kg)
Typical 6 Post Electric Unit with 12 Inch Stroke Cylinder:
72 Pounds (32.69 kg)
• System Must Be Guided 2 & 4 Post
• System Ships Fully Charged and Ready-to-Install Pump Housing
• Smooth, Quiet Operation Dimensions
• Flexible Tubing: 1" Bend Radius
• Highly Refined White Hydraulic Fluid
• Units are Rechargeable and Fully Serviceable in the Field 6 Post
• Powder Coated Housing Finish Pump Housing
• Manual Unit: Dimensions
• Five Revolutions Per Inch Travel
• Retractable Handle (Standard)
• Electric Unit:
• 87 RPM
• Internal Limit Switches
• Thermal Overload Protection
• UL Recognized CSA Certified
4M STD P-H REV:
• 12 VDC Switch. 30mA in Operation
"B"
4
REV DESCRIPTION
DESCRIPTION:
2 Post System Schematic 4 Post System Schematic 6 Post System Schematic
Cylinder Type A1A Cylinder Type B2D Cylinder Type C1C Cylinder Type D1A
Lift Cylinder A Length Lift Cylinder A Length Lift Cylinder A Length Lift Cylinder A Length B Length
Adj. Range IN (mm) Adj. Range IN (mm) Adj. Range IN (mm) Adj. Range IN (mm) IN (mm)
IN (mm) IN (mm) IN (mm) IN (mm)
6 (152) 8.38 (213) 6 (152) 8.75 (222) 6 (152) 8.88 (226) 6 (152) 11.50 (292) 6.50 (165)
8 (203) 10.38 (264) 8 (203) 10.75 (273) 8 (203) 10.88 (276) 8 (203) 13.50 (343) 9.45 (240)
10 (254) 12.38 (314) 10 (254) 12.75 (324) 10 (254) 12.88 (327) 10 (254) 15.50 (394) 9.45 (240)
12 ( 305) 14.38 (365) 12 ( 305) 14.75 (375) 12 ( 305) 14.88 (378) 12 ( 305) 17.50 (445) 13.38 (340)
14 (356) 16.38 (416) 14 (356) 16.75 (425) 14 (356) 16.88 (429) 14 (356) 19.50 (495) 13.38 (340)
16 (406) 18.38 (467) 16 (406) 18.75 (476) 16 (406) 18.88 (480) 16 (406) 21.50 (546) 13.38 (340)
5
System Selection Guide
-
# of Cylinders Actuator Type Cylinder Body Type Cylinder/Pump
Fitting Type
1 M = Manual Crank Drive A = In Line Tubing Port/ 1 = Straight / straight
External Retaining
2 N = No motor / handle
Ring Mount 2 = 90° / straight
3 E = 115 V AC (60 Hertz) (Cylinder Tube End)
3 = Straight / 90°
4 2 = 220 V AC (50 Hertz) B = 90° Tubing Port/
External Retaining
5 3 = 12 V DC 4 = 90° / 90°
Ring Mount
REV:
5 = 115 V AC High speed C = 90° Tubing Port/
(AC motors include a rocker (Cylinder Tube End) THIS PRINT IS THE
PROPERTY OF
MONARCH
HYDRAULICS INC.,
AND IS NOT TO
BE USED DIRECTLY
OR INDIRECTLY IN
NON-SPECIFIED
TOLERANCES:
.XX ± .010
.XXX ± .005
FRACT. ± 1/32
ANGLES ± 1/2°
DESCRIPTION:
CUSTOMER:
SIZE:
REV BY:
REV DATE:
A
REV DATE:
REV BY:
EWR:
SIZE:
REV:
DRAWN BY:
2 x 2 EXTR ASSY
DATE:
DESCRIPTION
DRAWING #:
1
MONARCH HYDRAULICS INC.
SHEET OF: 1
GRAND RAPIDS, MI USA
CUSTOMER:
DO NOT
SCALE
NON-SPECIFIED
.005-.010
REMOVE BURRS
TOLERANCES:
ANGLES ± 1/2°
BREAK EDGES
FRACT. ± 1/32
[MILLIMETER]
.XXX ± .005
INCH
.XX ± .010
REV
HYDRAULICS INC.,
OUR INTEREST
DETRIMENTAL TO
MONARCH
THIS PRINT IS THE
BE USED DIRECTLY
OR INDIRECTLY IN
AND IS NOT TO
PROPERTY OF
ANY WAY
REV:
REV DATE:
REV BY:
EWR:
SIZE:
REV:
DRAWN BY:
DRAWING #:
1
MONARCH HYDRAULICS INC.
SHEET OF: 1
GRAND RAPIDS, MI USA
DESCRIPTION:
CUSTOMER:
DO NOT
SCALE
.005-.010
REMOVE BURRS
TOLERANCES:
ANGLES ± 1/2°
BREAK EDGES
FRACT. ± 1/32
[MILLIMETER]
.XXX ± .005
INCH
.XX ± .010
REV
HYDRAULICS INC.,
OUR INTEREST
DETRIMENTAL TO
MONARCH
THIS PRINT IS THE
BE USED DIRECTLY
OR INDIRECTLY IN
AND IS NOT TO
PROPERTY OF
ANY WAY
REV:
3 INT MNT EXTR
REV DATE:
REV BY:
EWR:
SIZE:
REV:
DRAWN BY:
DRAWING #:
SHEET OF: 1
CUSTOMER:
DO NOT
SCALE
NON-SPECIFIED
.005-.010
REMOVE BURRS
TOLERANCES:
ANGLES ± 1/2°
BREAK EDGES
FRACT. ± 1/32
[MILLIMETER]
.XXX ± .005
INCH
.XX ± .010
REV
HYDRAULICS INC.,
OUR INTEREST
DETRIMENTAL TO
MONARCH
THIS PRINT IS THE
BE USED DIRECTLY
OR INDIRECTLY IN
AND IS NOT TO
PROPERTY OF
ANY WAY
REV:
8.25
(210mm)
3.88
(99mm)
"A"
"B"
6
- -
Live End Rod Type Cylinder Adjustment Standard or Custom Tubing Lenghts
Range Inches (mm)
A =Straight Rod End 06 (156) S = Standard Custom Flexible Tubing
Lengths Required From
08 (203) H = Heavy Duty 1500 lb. capacity
B = Retainer Ring Rod End Pump Unit To Each Cylinder
10 (254) T = Telescopic Leg Assembly (TLA)
C = Clevis Rod End (W B1C Style leg cylinder only.) Cyl # 1
12 (305)
Cyl # 2
D = Threaded Rod End 14 (356) Cyl # 3
16 (406) Cyl # 4
D Style Rod Type Options Cyl # 5
A = 3/8” Adapter with 3/8” Foot Glide 20 (508) ** 4 Post Units Only ** Cyl # 6
B = 3/8” Adapter without Foot Glide
Standard Tube Lengths
C = 1/2” Adapter with 1/2” Caster 2 cyl. 96”-60“
4 cyl. 96”-96”-60”-60”
D = 1/2” Adapter with 1/2” Foot Glide 6 cyl. 120”-120”-120”-96”-96”-96”
Max. Recommended
E = 1/2” Adapter without Foot Glide Tube Length is 12’
2.50
5.29
(64mm)
(134mm)
1.50
(38mm)
2.50
(64mm)
4.00
(102mm)
Ø 3.00
(76mm)
1.25
(32mm)
Rocker Switch Housing Rectractable Folding Handle Foot Glide For 4-Post System Footpedal (option w/electric unit)
(Comes Standard with AC Electric Unit) For Manual Unit
7
Heavy Duty Dyna-Lift®
1,500 lbs. (680 kg) Capacity
Manual Electric
Stroke “A” Dimension “B” Dimension Stroke “A” Dimension “B” Dimension
6 15.75 (400 mm) 20.91 (531 mm) 6 14.65 (372 mm) 28.48 (723 mm)
8 15.74 (400 mm) 20.91 (531 mm) 8 14.65 (372 mm) 28.48 (723 mm)
10 19.80 (503 mm) 24.97 (634 mm) 10 18.71 (475 mm) 32.54 (827 mm)
12 19.80 (503 mm) 24.97 (634 mm) 12 18.71 (475 mm) 32.54 (827 mm)
Specifications
Description mm Model # Manual HD Pump Assembly
8
Dyna-Lift® Internal & External
Aluminum Extrusion Mount
Raise or Lower your Structures with an
Easy-to-Install Dyna-Lift® System
9
Technical Information
• Adjustment ranges available in: 6”, 8”, 10”, 12”, 14” and 16” stroke.
• Lifting capacities up to 1,500 lbs. (with a Heavy Duty Dyna-Lift®).
• Single acting cylinders, power up and gravity down. Approximately
20 lbs. of weight per cylinder needed to retract properly.
• Manual (hand crank) or electric actuation available.
5
1 2
6
6
2
1 4
3
3 7
Assembly Instructions
(typical 2”x2” internal mount)
1. Drive the dowel pins into the #31 drilled holes in extru-
sion until flush.
2. Slide the end bracket over the support sub assembly so
that the counter bore of the bracket mates with the lip
on the housing.
3. Insert the support sub assembly with end bracket
into the extrusion at the end machined for the butt
fasteners.
4. Attach the support sub assembly to the extrusion with
the #10-32 cap screws and butt fasteners.
5. Slide the cylinder sub assembly into the slotted end
of the extrusion until the cylinder stop hits the dowel
pins.
6. Slide the #8-32 cap screws thru the counter bored
holes in the extrusion and secure with the t-nuts.
7. Thread the adjustable glide into the foot.
The leg is now ready for table mounting.
10
Telescopic Leg Assembly (T.L.A.)
Specifically designed to provide optimum form and
function for industry specific ergonomic height
adjustable needs. The two piece anodized alumi-
num extrusions were designed to work in tandem
with each other to provide smooth, quiet, rigid
height adjustability regardless of off-center or canti-
lever loads.
The T.L.A. System allows Original Equipment Manu-
facturers to easily integrate the columns into custom
applications. Simply bolt on your top and bottom
frame with cross member, then add your table top.
The T.L.A. System offers the perfect height adjustable
solution for your ergonomic OEM design.
UP
DOWN
Technical Information
• Materials: extruded aluminum with clear matte anodized finish
• Adjustment range: 12” (305mm)
24” (610mm) fully retracted
36” (914mm) fully extended
• Capacity:
250 lbs. per column
500 lbs. per set of 2 columns
• Multiple columns available
• Designed to be used with B1C cylinders
• Manual (hand crank) or electric actuation
11
*
(Included)
(Included)
(Included)
*
(Included)
Description mm Model #
Two Cylinder, Manual, 12” Stroke 305 2M-B1C-12-T
Two Cylinder, Electric, 12” Stroke 305 2E-B1C-12-T
12
Working with you for the
best hydraulic solution
Super Dyna-Lift®
(3,000 - 20,000 lbs.
(1360 - 9100 kg) capacity)
13
®
14
®
15
®
System Selection Guide
- -
Models # Load # Of Cylinders Leg Code Leg Cyl. Port & Fitting Pump
Z 03 3,000 lbs. 4 R = Retrofit 1 = Top Port, Striaght Fitting P = Pump and Manifold
2 = Side Port, Straight Fitting Electrically Operated
3 = Top Port, 90° Fitting
4 = Side Port, 90° Fitting
Example :
Code Z03-4R4-P2L12-1 Specifies
The Following Unit :
Intermediate Dyna-Lift® Retrofit Style Cylinder
1) 3,000 Pound Lifting Capacity
2) 4 Legs
3) Retrofit Style Leg Design
4) Leg Cylinder Side Port 90° (41 mm)
(50 mm)
(110 mm)
6) 90° Pump Fitting
7) Power Unit: left Side Horizontal
Mount Top View
8) 12 Inch Stroke
9) 110 Volt 1 Phase AC Motor
1.56
(40 mm)
3.33
(85 mm)
(17 mm) (50 mm)
(34 mm)
17.06
(433 mm) 21.71
(551 mm)
(51 mm)
1.12
(28 mm)
(86 mm)
16
-
Pump Fitting Power Unit Orientation Stroke Motor Code Hose Lengths
1 = Straight Fitting Off Pump T = Top Mount, Vertical or Horizontal 12 = 12“ 4 = 480 3 Phase Custom Flexible Tubing
2 = 90° Fitting Off Pump R = Right Side, Vertical or Horizontal 3 = 240 3 Phase Lengths Required From
Pump Unit To Each Cylinder
L = Left Side, Vertical or Horizontal 2 = 240 1 Phase
1 = 110 1 Phase Cyl # 1
H = Hand Pump Cyl # 2
Cyl # 3
Cyl # 4
13.97
Hydraulic Power Unit Hand pump
(355 mm)
5.36 10.00
(136 mm) (254 mm)
12.97
(329 mm) NOTE :
5.36
Top View
12.97
(329 mm)
10.00
As Long as the Fill Plug is Pointing
Upward the Tower can be Stood up
(136 mm) (254 mm)
Right Side Horizontal Vertically or laid Down Horizontally.
Mount
12.97
(329 mm)
13.97
12.97 1.25 25.94
Ø .44 (11 mm) THRU (355(329
mm)mm)
4X (32 mm) (658 mm)
5.36
Side
12.00 View Ø .44 (11 mm) THRU
(136 mm) (305 mm) 4X
13.97 Manual Hand Pump
5.36 (355 mm)
(136 mm)
12.97
(329 mm)
5.36
(136 mm)
15.03
21.18
(382 mm)
(538 mm)
9.50
Bottom View (241 mm)
17
®
System Selection Guide
-
Model # Load Legs Leg Code
Z 06 6,000 Lbs. 2 T = Tube Style
20 20,000 Lbs. 4 R = Retrofit
Z20 Z06
DRILLING,
WELDING AND
CUTTING
PERMISSIBLE
26.31 (668 mm) RETRACTED 26.31 (668 mm) RETRACTED 2.50 (64 mm)
38.31 (973 mm) EXTENDED 38.31 (973 mm) EXTENDED
2.00 2.00
(51 mm) (51 mm)
TYP TYP
8.00 8.00
(203 mm) (203 mm)
20.50
(521 mm)
24.06 WELDING PERMISSIBLE
DRILLING FORBIDDEN
(611 mm)
6.81 6.81
(173 mm) (173 mm)
"C"
Ø 2.00 Ø 1.00
(51 mm) (25 mm)
5.00
(127 mm) Ø .88 (22 mm) THRU
2X
18
-
Pump Stroke Motor Code Hose Lengths
P = Pump and 12 = 12“ 4 = 480 3 Phase Custom Flexible Tubing
Manifold Operated = up to 30“ 3 = 240 3 Phase Lengths Required From
on Z06 Pump Unit To Each Cylinder
2 = 240 1 Phase
= up to 16“ 1 = 110 1 Phase Cyl # 1
on Z20
Cyl # 2
Cyl # 3
Cyl # 4
11.00 12.88
(279 mm) (330 mm)
10.75
(273 mm)
34.50 37.00
(876 mm) (940 mm)
VERTICAL MOUNT
"B" HOLES Ø .563 (14 mm)
8 HOLES
"A"
19
Bucher Hydraulics
info@bucherhydraulics.com