Escolar Documentos
Profissional Documentos
Cultura Documentos
DHCP
ICMP
IP
TCP
UDP
For the TCP/IP model for internetwork communication, which statement describes the process for the transition of
data from the internet layer to the network access layer?
Which three types of information are provided to a host by an integrated router that is acting as a DHCP server?
(Choose three.)
host ID
IP address
MAC address
hostname
subnet mask
A host wants to send information simultaneously to all the other hosts in the same network. Which domain will
support this type of communication?
broadcast
unicast
local
multicast
124
126
252
254
255
256
This type of computer is useful for knowledgeable consumers with special needs.
when a high-speed digital connection is required over the regular telephone line
when a satellite dish is used
A home user was successfully browsing the Internet earlier in the day but is now unable to connect. A ping command
from a wireless laptop to a wired PC in the LAN is successful, but the nslookup command fails to resolve a website
address. The user decides to analyze the LEDs on the Linksys router to verify connectivity. Which LED should be of
main concern in this situation?
WLAN LED
power LED
Internet LED
What is the most common reason that ISPs provide symmetrical transfer services?
They identify a specific NIC on a host device by assigning a permanent logical address.
They are used to determine which host device accepts the frame.
They are used to determine the network that the host is located on.
A network designer is working with a small company to determine the network type best suited to the needs of the
company. Which two characteristics could the designer use to describe a peer-to-peer network to the owner of the
company? (Choose two.)
central administration
easy to install
low cost
scalable
secure
Which part of a data packet is used by a router to determine the destination network?
source IP address
user data
destination IP address
control information
Refer to the exhibit. PC1 sends a data packet to PC4. When the router forwards the data out Fa0/1, what destination
MAC address will the router place in the frame?
0050.0FA9.CB47
0050.E208.A761
0200.5455.4E01
0200.545D.25F7
Refer to the exhibit. A local area network is built with four PCs, a switch, and a hub. PC1 sends a packet to PC4
which collides with a packet sent from PC3 to PC1. Which devices will receive the damaged frame?
Refer to the exhibit. Host2 attempts to establish communications with Server1. What action will switch SW1 take prior
to forwarding the frame?
Refer to the exhibit. Which statement is true based on the information that is shown in the exhibit?
All wireless devices that are connected to this AP must have an assigned SSID of University.
Any wireless client that is attached to this AP must have the same IP address and SSID.
Where do ISPs get the public addresses that they assign to end users?
For an IP address, what component decides the number of bits that is used to represent the host ID?
default-gateway
host number
network number
subnet mask
What describes the external IP address that is obtained by a router through a cable or DSL modem?
Which three address ranges can be used to depict private IP addresses? (Choose three.)
10.0.0.0 to 10.0.0.255
127.16.0.0 to 127.16.255.255
150.150.0.0 to 150.150.255.255
172.16.1.0 to 172.16.1.255
192.168.22.0 to 192.168.22.255
200.100.50.0 to 200.100.50.255
Your school network blocks all websites related to online gaming. What type of security policy is being applied?
remote access
acceptable use
incident handling
Bluetooth
infrared
Which type of attack involves flooding a server port with SYN messages?
phishing
brute force
denial of service
data manipulation
adware
hackers
internal users
spammers
Refer to the graphic. What feature can be installed on the Linksys integrated router to convert private IP addresses to
Internet-routable addresses?
authentication
DHCP
encryption
firewall
NAT
WEP
Before implementing a stateful firewall on an ISR router, a network engineer is asked to explain to upper
management in simple terms what a stateful firewall is. Which description should the engineer use?
A stateful firewall can be configured to allow incoming packets only from sessions that are initiated from inside.
to create a dirty zone that allows all inbound and outbound traffic
to allow for a publicly accessible zone without compromising the internal network
to specify a higher security level than normally required for the internal production network
It connects the receive pins on the first device to the receive pins on the second device.
It connects the transmit pins on the first device to the receive pins on the second device.
It disconnects the transmit pins and uses only the receive pins.
What is an advantage of selecting an operating system that has a commercial license over one with a GPL license?
The commercial license-based operating system ensures full access to the source code for everyone.
The commercial license-based operating system ensures that everyone can participate in the enhancement of
the product.
Which installation option enables a single physical resource to function simultaneously as multiple logical resources?
clean install
multi-boot
upgrade
virtualization
For devices that do not autosense, which connection requires a crossover cable?
PC to switch port
PC port to PC port
When terminating UTP cabling, why is it important to untwist only a small amount of each wire pair?
minimizes crosstalk
Top of Form
printer
flash drive
headphones
external DVD
barcode reader
Within a local network, which two items must be unique on a computer for it to successfully connect to the network?
(Choose two.)
IP address
subnet mask
computer name
The DSL modem failed to provide an IP address for the local PC.
Refer to the exhibit. Which statement is true based on the configuration shown?
All APs in the WLAN will allow wireless connections via channel 6.
The network name must be entered on a host computer before the host connects to this
network.
Refer to the exhibit. What is the effect of setting the security mode to WEP on the Linksys integrated router?
The WEP security mode enables the AP to inform clients of its presence.
The WEP security mode encrypts network traffic during transmission between the AP and
the wireless client.
The WEP security mode generates a dynamic key each time a client establishes a
connection with the AP.
A network administrator is planning an inexpensive WLAN implementation at a small business site. Which two
strategies should be included in the site survey? (Choose two.)
While conducting a site survey for a new wireless LAN design, a network technician determines that several wireless
phones in the company use the 2.4GHz band and could interfere with the operation of the wireless LAN. Based on
this, which two wireless LAN standards could be implemented to avoid this interference? (Choose two.)
original 802.11
802.11a
802.11b
802.11g
802.11n
Refer to the exhibit. A small office uses an ISR to provide connectivity for both wired and wireless computers. One
day, a sales person who is using a laptop cannot connect to Server1 through the wireless network. A network
technician attempts to determine if the problem is on the wireless or the wired network. The technician pings
successfully from the wireless laptop to the default gateway IP address on the ISR. What should be the next
troubleshooting step?
Ping from the laptop to the Ethernet port on the cable modem.
A user is unable to send e-mail. To begin troubleshooting this problem, the network technician uses the browser on
the PC and tries to access some popular Internet websites. Which troubleshooting approach is being followed?
bottom-up
divide-and-conquer
top-down
For the second time in a week, workstations on a LAN are not able to log into the server. The technician fixed the
problem the first time, but cannot remember the steps taken to solve it. What aspect of the troubleshooting process
has the technician neglected?
identifying the problem
Refer to the exhibit. When www.cisco.com is entered in a browser window on a PC, the web page is unavailable.
While troubleshooting this problem, the network technician executes the nslookup command as well as the ping
command to the web server. What is the likely reason that the web server home page cannot be displayed?
The reason that the web server is unable to display the web page is that the web server is unavailable.
The increased response time displayed in the ping may indicate a delay in server response time.
A user in a small office is unable to connect to the Internet. The user examines the physical connections to the ISR, a
Linksys WRT300N, and notices a solid green LED on the port that is wired to the computer. What does the LED
indicate about the current state of the port?
The ISR does not detect that the computer is plugged in.
Bottom of Form