Você está na página 1de 2

Manual/Lab Outline **This outline is subject to change**

Lab1 – Introduction to PSS/E


• Brief explanation of PSS/E (PSS/E Online documentation can be used for this –
contents.pdf in the senior design folder)
1. Power Flow
2. Dynamics
• How to open PSS/E – Include the use of a USB Key
1. Set Bus # & Restart PSS/E
• Brief explanation of file types (*.sav, *.raw, *.sld, *.idv, *.txt, *.dat)
1. Include the purpose and usage with PSS/E
• How to load a Case - Include name of data file (*.sav)
• Explain Tabs (will cover 6 out of 19 tabs)
1. Buses – Bus #, Bus name, kV, Per unit, Code/Type
2. Branches – From # & name, to # & names, length, R(resistance),
X(impedance), B(charge impedance), rate in MVA
3. Loads – Name, #, ID, service status, Pload, Qload
4. Machines – Name, #, ID, service status, Pgen, Pmin, Pmax, Qgen, Qmin, Qmax
5. 2-winding X-FMR – From # & name/kV, to # & name/kV, service status
6. Switch shunts – name, #, kV, remote buss #/VHi/VLow, Binit, Blocks x # steps
• Request information to be extracted and compiled from the data file (*.sav)

Lab2 – 1-Line Diagram/Creating a slider file


• Open PSS/E
• Load data file (*.sav)
• Explain elements of 1-Line diagram
1. Buses, Branches, Transformers, Reactors, Loads, etc.
• Load new slider (file  new  diagram)
1. Set auto draw – select auto draw button
• Load bus - Double click on bus in data file
1. Make sure bus is a line – right click on bus and select toggle bus symbol
• Grow
1. Right Click  select “Grow”
2. Select button in toolbar
• Grow out to a total of 10 Buses & Save
1. Explain Binding & Unbinding
2. The use of knees
3. Adding line load %
• Print
Lab3 – Using the Solve function
• Open PSS/E
• Load data file (*.sav)
• Load Slider file (*.sld)
• Switch one line out at a time and solve

1. Switch out line – Right click on branch  select “Switch”


2. Solve – By clicking on button in toolbar
• Fill in proved table with results
1. Sample table
Outage Line Flow L1 L2 L3 …

L1 X
L2 X
L2 X
… X

Lab4 – Creating ACCC Report


• Open PSS/E
• Load data file (*.sav)
• Load given *.con, *.mon & *.sub files
1. Explain *.con, *.mon & *.sub files
• Generate *.dfx & *.acc files
• Run ACCC
• Get ACCC Report
• Compare results w/ table from Lab3

Lab5 – Multiple ACCC Report


• Modify *.con, *.mon & *.sub files
• Open PSS/E
• Load data file (*.sav)
• Load Slider file (*.sld)
• Load modified *.con, *.mon & *.sub files
• Re-run single ACCC reports

Lab6- Addition of Load/Generation


• Open case
• Draw slider file
• Split line
• Add bus
• Add transformer
• Add wind farm using IPL and files provided

Você também pode gostar