Escolar Documentos
Profissional Documentos
Cultura Documentos
2003
Cross-linking
Wirsbo-PEX is a pipe for a wide range of applications. The pipe is made from
cross-linked high-density polyethylene (PE-X) in accordance with the Engel
process. Cross-linking is a process, which changes the chemical structure of
the plastic material in such a way that the polymer chains are connected with
each other to form a strong three-dimensional net of chemical bonds.
The new chemical structure makes it impossible to melt or dissolve the
polymer, without first destroying its structure. Wirsbo-PEX pipes are suitable
for use at pressures and temperatures for which previously only metal pipes
were appropriate.
Molecular structure of cross-linked
polyethylene.
Some facts Wirsbo-PEX material has features common to most plastics and some,
which are unique:
It is unaffected by corrosion or erosion
It is resistant to additives in concrete
With it’s small thermal expansion forces, it will not cause cracks
neither in the PE-X material nor in the concrete in which it is
laid
It is crack-resistant for scratches of up to a depth of 20% of the
wall thickness
It has very low friction, resulting in small pressure drop
It has a low weight
It is flexible enough to allow small bending radii
It is flexible at temperatures down to –40°C
It tolerates temperatures from -100°C to +110°C
It has a flexibility, which will absorb noise generated at any given
point within the pipe
Environmentally friendly
It is a very clean pipe that is used in hospital environments, e.g.
dialysis and clinics.
... for various applications
Wirsbo Tap Water System
We offer a complete easy-to-install and water damage safe tap water
system, based on the Wirsbo-PEX pipe. The pipes channelled through
conduits can be laid safely concealed within building structures. One
single seamless length of Wirsbo-PEX Pipe-in-conduit from the manifold
all the way to the draw-off point simplifies design and installation work.
Wirsbo Tap Water System
Special applications
The strong and unique properties of Wirsbo-PEX
can be used in a wide range of demanding applications,
e.g. mining, electrical - and medical applications.
Special applications – industrial use
Wirsbo-PEX© is the registered Trade Mark of Uponor Wirsbo AB of Sweden. The
1197GB 03-01-2-M
products described in this manual are generally protected by Letters Patent
throughout the world. In keeping with our policy of continuous improvement
and development, the company reserves the right to change specifications
without prior notice.
Thermal properties
Temperature range –100 to +110 °C
Coefficient of linear expansion (at 20°C) 1.4 x 10–4 m/m°C
Coefficient of linear expansion (at 100°C) 2.05 x 10 –4
m/m°C
Softening temperature +133 °C
Specific heat 2.3 kJ/kg°C
Coefficient of thermal conduc- 0.35 W/m°C DIN 4725
tivity
Electrical properties
Specific internal resistance (at 20°C) 1015 Ωm
Dielectric constant (at 20°C) 2.3 –
Dielectric loss factor (at 20°C/50 Hz) 1 x 10–3 –
Rupture voltage (at 20°C) 60–90 kV/mm
Uponor Wirsbo AB
Box 101 Tel +46 (0)223 380 00
SE-730 61 Virsbo Fax +46 (0)223 387 15
Sweden www.wirsbosystems.com