Mobile: - 00966 570483042,0598732646 Email: - Mohammedshaiquenaveed@gmail.com Email: Mohammed.naveed@intertek.com QA/QC WELDING INSPECTOR WORK EXPERIENCE 6 Years: - CAREER OBJECTIVE To join a progressive & reputable company as QA /QC Professional to apply the relevant knowledge, expertise and experience acquired in previous employment & Contribute significant progress. To implement fully the quality control procedure& inspection and test plan in order to meet project specification requirement without causing delay to finish mile stones & HSE Concerning. SKILL/ STRENGTH:- Disciplinary exposure and experience in all aspects of Project Execution. Excellent written and oral communication skills. Ability to effectively work in Multicultural Teams as a member. Ability to work under pressure and meet deadlines. A good technical grasp. Systems approach to problem solving. PROFESSONAL QUALIFACATION:
B.Tec in Mechanical Engineer
TECHNICAL PROFICIENCY: -
AWS (CWI) 3.1 WELDING INSPECTOR
AMERICAN WELDING SOCIETY CERTIFICATE Certificate No : - 17053591, Expiration : 1 May 2020 Certified Welding inspector
SPECIALIZATION:-
ASNT Level II Certificate in NDT Techniques
Radiographic Testing Magnetic Particle Testing. Liquid Penetrant Testing. Ultrasonic Testing WORK EXPERIENCE 6 Years: - Project: FADHILI BACHELOR CAMP-PROJECT Company: INTERTEK.SAUDI ARABIA Position: QA-QC WELDING INSPECTOR [Saudi Aramco PID] Duration: (OCT 2018 to till date) Client: SAUDI ARAMCO
Project : FADHILI GAS-FIRED COMBINED HEAT & POWER PLANT
Company: AL-ADWANI (DOOSAN) Position: QA-QC WELDING INSPECTOR Duration: (Nov 2017 to Sept 2018) Client: Saudi Aramco affiliate (30%), Saudi Electricity Company (30%) and an Engie affiliate (40%)
Project: SAUDI KAYAN
Company: HADI HAMAD AL HAMMAM (SHUTDOWN) Position: QA-QC WELDING INSPECTOR ( SABIC APPROVAL) Duration: (Sep 2017 to Nov 2017) Client: SABIC
Project : POWER PLANT 13
Company: ABDULLAH NAAZ & GAMA Position: QA-QC PIPING & WELDING INSPECTOR Duration: (Mar 2016 to Aug 2017) Client: WORLEY PERSON ( SAUDI ELECTRICITY COMPANY)
Familiar with Saudi Aramco codes, standards & Specifications.
Raising and closing of daily and weekly RFIS of concerned activities In their respective areas, Raising and closing of proactive ,standard violations and internal NCR,s of their concerned areas, Coordinate with site construction team on any quality issues, Familiar with International codes such as ASME 31.3, 31.4,31.8, 16.5, Sec V & IX, API 510,570& 653 etc., Preparation of All documents related from start to close out the job including from Material Receiving, fabrication, installation, coating, testing & As Built (As per Applicable Standards), Checking of material specification as per IFC MTO & Isometrics, Selection of Suitable welding Consumables as per WPS Specifications, Checking of fit‐up and co‐ordinates of spool joints in erection work as per isometrics & Checking of various supports fabrication and installation is as per standard support specifications, Inspection of all welding activities prior, during and after, which include material check, qualifications and calibrations of welding equipment’s, Inspection & Preparing of daily welding reports and all related documents, Witnessing of welder qualification test and WPQR, Issuing of welder qualification cards, Maintaining data base of welder qualification cards, Closely Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions, Monitoring weekly and monthly welder’s performance, Conducting & coordinating of NDT(PT/MT/UT/ RT) on welded joints as per NDT plan & given specifications, Conducting tool box meetings for welders for safety as well as quality concepts, Interpretation of radiographs as per codes & standards, Monitoring & Review of Preheat/Post heat (PWHT) of piping joints, Make sure that activities are done in accordance with standard codes of practice, drawings, applicable job specifications, Quality control procedures (QCP), and Inspection and Test plan (ITP) at the job site. Strict follow-up of the implementation of approved ITP. Assist in preparing Quality Procedures and Test Packages. Prepare weld mapping of isometric drawings and dimension check of completed spools. Reviewing piping isometrics drawing and details. Check all weld sizes, profile and locations. Verify heat number, inspection during fabrication and erection such as pipe cut length, edge preparation, fit-up, branch connections, flanged joints, valve connections, bending and forming, hot adjustment, bolt, nuts, washer, gasket and tolerances cleaning requirements. Inspection of Structural supports as per Isometric Drawings. Clearing of punch/snag list and inspection release note. Preparation and Client approval of Hydro test packages. Witnessing of Hydro test of Piping, valves as required along with the client Inspector. Co-ordinate with construction, testing group and QC department in the preparation of the requirements of each test pack. Hydro testing and facilitate close out of any outstanding punch items before and after Hydro test. Visual Inspection and Hydrostatic/Pneumatic Test witnessing of valves at vendor shops. Monitor welder performance, weekly repair rates, and lot and penalty control. Monitor storage and handling of welding consumables like low hydrogen electrodes. Attend RFIs as per the ITP in each stage of fabrication or installation. Coordinate NDTs, PMIs, PWHTs, & Hardness tests and review the results as per required standards. Carrying out Inspection on Piping and Pipelines for orientation, bolt tightening, gasket verification, spool verification etc. with relevant engineering drawings & specs Review weld history and hydro test packages to ensure compliance to specification requirements and ensure that all ‘A’ punches have been attended. Ensure the materials used for the fabrication are as per bill of materials. Check the spool dimension and orientation as per isometrics. Conduct line checking as per isometric or P&ID for mechanical completion and prepare pretest punch list. Witness hydro test or pneumatic test as required. Monitor reinstatement and lay up requirements as per the specification for mechanical completion. Monitoring welding activities for different materials like P91, P22, P11, P8, P5A, P4, P1, C.S, LTCS, low alloy steel, stainless steel A312TP304, 304L, & 316L we ding in different process GTAW, SMAW, FCAW & SAW follows the approved WPS, applicable code, standards and specification.
Company: MESUKA ENGINEERING SERVICES
Position: MECHANICAL SUPERVISOR Duration: (Aug 2012 to Nov 2013) Client: ACC CEMENT
DUTIES & RESPONSIBILITES:
Making sure all safety precautions are taken
Prepare weld mapping of isometric drawings and dimension check of completed spools. Reviewing piping isometrics drawing and details. Check all weld sizes, profile and locations. Verify heat number, inspection during fabrication and erection such as pipe cut length, edge preparation, fit-up, branch connections, flanged joints, valve connections, bending and forming, hot adjustment, bolt, nuts, washer, gasket and tolerances cleaning requirements. Inspection of Structural supports as per Isometric Drawings. Clearing of punch/snag list and inspection release note. Preparation and Client approval of Hydro test packages. Witnessing of Hydro test of Piping, valves as required along with the client Inspector. Co-ordinate with construction, testing group and QC department in the preparation of the requirements of each test pack. Hydro testing and facilitate close out of any outstanding punch items before and after Hydro test. Visual Inspection and Hydrostatic/Pneumatic Test witnessing of valves at vendor shops. Monitor welder performance, weekly repair rates, lot and penalty control. Monitor storage and handling of welding consumables like low hydrogen electrodes. Attend RFIs as per the ITP in each stage of fabrication or installation. Coordinate NDTs, PMIs, PWHTs, & Hardness tests and review the results as per required standards. Carrying out Inspection on Piping and Pipelines for orientation, bolt tightening, gasket verification, spool verification etc. with relevant engineering drawings & specs Review weld history and hydro test packages to ensure compliance to specification requirements and ensure that all A punches have been attended. Ensure the materials used for the fabrication are as per bill of materials. Check the spool dimension and orientation as per isometrics. Conduct line checking as per isometric or P&ID for mechanical completion and prepare pretest punch list. Witness hydro test or pneumatic test as required. Monitor reinstatement and lay up requirements as per the specification for mechanical completion. KNOWLEDGE OF ENGINEERING STANDARDS: - B31.1- Power Piping B31.3- Process Piping AWS D1.1 - Structural Welding Code Steel
Technical Software : Auto Cad & Solid Works (CAD-CAM)
Application Packages : Microsoft Office Operating Systems : Windows 98/2000/XP/Vista/7 PERSONAL PROFILE:-
1. Name : Mohammed Shaique Naveed
2. Iqama no : 2441995962 3. Nationality : India 4. Marital status : Single 5. Languages Known : English & Hindi. 6. Current location : Jubail, Saudi Arabia DECLARATION I hereby declare that the above statement stated above are true to the best of my knowledge is concerned. I also assure that of ever I get any chance I will work full skill and diligence.