Escolar Documentos
Profissional Documentos
Cultura Documentos
Book Produtos PDF
Book Produtos PDF
Quality
Wire rods are avaliable in carbon steel (high, medium
and low carbon) and in alloy steels.
Diameter/Diámetro:
Internal (DI) 810 to 910 mm
External (DE) 1,130 to 1,230 mm
Dimensional Tolerances (mm)/Tolerancias Dimensionales
Tolerance Out of round Length/Largo (C):
Ø ≤ 19.05mm: 1,300 - 1,900mm
Quality level Quality level Ø ≥ 20.00mm: 900 - 1,200mm
Size, mm 202 210 202 210
Adequate side to begin uncoiling: opposite to the strip
5,50 a 10,00 +/- 0,30 +/- 0,25 / 0,20* 0,48 0,40 / 0,32* knot.
10,50 a 19,05 +/- 0,40 +/- 0,30 / 0,25* 0,64 0,48 / 0,40* Lado Adequado para inicio del desarollo: opuesto
20,00 a 24,00 +/- 0,40 +/- 0,30 0,64 0,48 al del nudo amarrillo.
> 24,00 +/- 0,40 +/- 0,40 0,64 0,64
Sizes available / Medidas disponibles (mm): 1084 – 5,50 / 6,50 / 7,00 / 8,00 / 9,00 / 10,00 and BL82 – 10,50 / 11,50 / 12,00 / 12,70.
Other sizes, upon request. Otras medidas, bajo consulta.
Wire Rod Alambrón
SAE 1005 Mod. MA05A 0,08 max. 0,25 - 0,40 0,030 max. 0,050 max. 0,07 - 0,20 0,008 max. 420
SAE 1008 Mod. MA08D 0,10 max. 0,30 - 0,60 0,030 max. 0,050 max. 0,10 - 0,25 0,008 max. 460
SAE 1010 Mod. MA10C 0,08 - 0,13 0,30 - 0,60 0,030 max. 0,050 max. 0,10 - 0,25 0,008 max. 480
SAE 1012 MA12B 0,10 - 0,15 0,30 - 0,60 0,030 max. 0,050 max. 0,10 - 0,25 0,008 max. 490
SAE 1015 MA15S 0,13 - 0,18 0,30 - 0,60 0,030 max. 0,050 max. 0,10 - 0,25 0,008 max. 510
** Sizes available / Medidas disponibles (mm): 5,50 / 6,00 / 7,00 / 8,00 / 9,00 / 10,00 / 12,00 / 12,30. Other sizes, upon request. Otras medidas, bajo consulta.
Wire Rod Alambrón
* Sizes available / Medidas disponibles (mm): 5,50 / 6,50 / 7,00 / 8,00 / 9,00 / 10,00 / 10,50 / 11,50 / 12,00 / 12,70 / 14,30 / 15,90 / 17,50 / 18,30 19,05 /
20,64 / 22,50 / 23,81 / 25,40 / 27,00 / 28,58 / 31,75. Other sizes, upon request. Otras medidas, bajo consulta.
** Sizes available / Medidas disponibles (mm): 5,50 / 6,50 / 7,00 / 8,00 / 9,00 / 10,00 / 10,50 / 11,50 / 12,00 / 12,70. Other sizes, upon
request. Otras medidas, bajo consulta.
Wire Rod for Alambrón
Sizes available / Medidas disponibles (mm): 5,50 / 6,50 / 7,00 / 8,00 / 9,00 / 10,00 / 10,50 / 11,50 / 12,00 / 12,70 / 14,30 / 15,90 / 17,50 18,30 / 19,05 /
20,64 / 22,50 / 23,81 / 25,40 / 27,00 / 28,58 / 31,75. Other sizes, upon request. Otras medidas, bajo consulta.
Wire Rod Alambrón
Sizes available / Medidas disponibles (mm): 5160 - 5,50 / 6,50 / 7,00 / 8,00 / 9,00 / 10,00 / 10,50 / 11,50 / 12,00 / 12,70 / 14,30 / 15,90 / 17,50 18,30 / 19,05
/ 20,64 / 22,50 / 23,81 / 25,40 / 27,00 / 28,58 / 31,75 and 9254 - 6,50 / 7,00 / 8,00 / 9,00 / 10,00 / 10,50 / 11,50 / 12,00 / 12,70 / 14,30 / 15,90. Other
sizes, upon request. Otras medidas, bajo consulta.
Wire Rod Alambrón
Sizes available / Medidas disponibles (mm): 5,50 / 6,50 / 7,00 / 8,00 / 9,00 / 10,00 / 10,50 / 11,50 / 12,00 / 12,70 / 14,30 / 15,90 / 17,50 /
18,30 / 19,05 / 20,64 / 22,50 / 23,81 / 25,40 / 27,00 / 28,58 / 31,75. Other sizes, upon request. Otras medidas, bajo consulta.
Wire Rod Alambrón
Sizes available (mm): 5,50 / 6,50. Upon request, other specifications can be attended.
Medidas disponibles (mm): 5,50 / 6,50. Mediante consulta técnica, otras especificaciones pueden ser atendidas.
Wire Rod for Alambrón para
Sizes available / Medidas disponibles (mm): 5,50 / 6,50 / 7,00 / 8,00 / 9,00 / 10,00 / 10,50 / 11,50 / 12,00 / 12,70 / 14,30 / 15,90 / 17,50 / 18,30 / 19,05 /
20,64 / 22,50 / 23,81 / 25,40 / 27,00 / 28,58 / 31,75. Other sizes, upon request. Otras medidas, bajo consulta.
Sizes available / Medidas disponibles (mm): PZ65 - 5,50 / 6,50 / 7,00 / 8,00 / 9,00 / 10,00 / 10,50 / 11,50 / 12,00 / 12,70 / 14,30 / 15,90 / 17,50 / 18,30 /
19,05 and PZ35 - 11,50 / 12,00 / 12,70 / 14,30 / 15,90 / 17,50 / 18,30 / 19,05 / 20,64 / 22,50 / 23,81. Other sizes, upon request. Otras medidas,
bajo consulta.
Light Sections Perfiles y
Equal Flange Angle Bars — Sizes x Linear Mass (kg/m) Round Bars for Metalwork
Widhts Size Linear Mass
Ticknesses 1/2” 5/8” 3/4” 7/8” 1” 1.1/4” pol mm kg/m
2,5 mm 0,45 0,57 0,70 – 0,95 – 3/8” 9,53 0,56
3,0 mm 0,53 0,68 0,83 – 1,13 – 7/16” 11,11 0,76
1/8” 0,56 0,71 0,87 1,03 1,19 1,50 1/2” 12,70 0,99
– – – – 1,64 2,20 5/8” 15,88 1,55
4,5 mm
11/16” 17,46 1,88
3/16” – – – – 1,72 2,86
3/4” 19,05 2,24
6,0 mm – – – – 2,11 –
7/8” 22,23 3,04
1/4” – – – – 2,22 –
1” 25,40 3,98
1.1/8” 28,58 5,04
1.3/16” 30,16 5,61
1.1/4” 31,75 6,22
Steel Long Products South America General Catalogue - October 2008
Squared Bars — Sizes x Linear Mass (kg/m)
Sizes
1/4” 5/16” 3/8” 11,50mm 12,00mm 1/2” 5/8” 16,00mm 3/4”
0,32 0,48 0,71 1,04 1,13 1,27 1,98 2,01 2,85
Specification: NBR 7007 MR250 (ASTM A 36). Typical sizes: 2,5 mm, 3,0 mm,
4,5 mm, 5,0 mm. Other sizes, upon request. Dimensional tolerance: ASTM A 6.
Especificación: NBR 7007 MR250 (ASTM A 36). Grosor tipico: 2,5 mm, 3,0 mm, 4,5 mm, 5,0 mm.
Otras medidas, bajo consulta. Tolerancia dimensional: ASTM A 6.
Flat Rolled Bars Pletinas Laminadas
Structural Estructurales
3,0mm 0,90 - - - -
- Sizes x Linear Weight (kg/m)
1/8” 0,95 1,27 - -
Metric Series — Generic Use
4,5mm 1,35 1,80 - - -
Width (mm)
3/16” 1,42 1,90 - - -
Ticknesses (mm) 68 92 130
6,0mm 1,80 - - - -
5,06 12 - - 12,25
1/4” 1,90 2,53 3,17 3,80
6,33 14 - - 14,29
5/16” 2,38 3,17 3,96 4,75
7,60 16 - - 16,33
3/8” 2,85 3,80 4,75 5,70
10.13 18 - - 18,37
1/2” 3,80 5,06 6,33 7,60
12,66 19 – – 19,39
5/8” 4,75 6,33 7,92 9,50
15,19 22 - 15,89 -
3/4” - - - 11,40
20,26 28 14,95 - -
1” - - - 15,19
- 35 18,68 - -
1.1/8” - - - 17,09
1.1/4” - - - 18,99 -
Specifications: NBR 7007 MR250 (ASTM A 36), QST
52.3, SAE 1020, SAE 1045, SAE 1050, SAE 1070.
Specifications: NBR 7007 MR250 (ASTM A 36), SAE 1020, SAE Other specifications, upon request. Dimensional
1045, SAE 1050 e SAE 1070. Other specifications, upon request. tolerances: ASTM A 6.
Dimensional tolerances: ASTM A 6.
Especificaciones: NBR 7007 MR250 (ASTM A 36), QST 52.3, SAE
Especificaciones: NBR 7007 MR250 (ASTM A 36), SAE 1020, SAE 1045, SAE 1050 y 1020, SAE 1045, SAE 1050, SAE 1070. Otras especificaciones,
SAE 1070. Otras especificaciones, bajo consulta. Tolerancia dimensional: ASTM A 6. bajo consulta. Tolerancia dimensional: ASTM A 6.
Flat Rolled Bars Pletinas Laminadas
for Leaf Springs para Resortes
Rebar
Mechanical Purposes
Tensile Requirements
Sizes Yield Stregth (YS) Tensile Streght (TS)
Standards Grade TS/YS Elongation (%)
(mm) [No.] (Mpa) (psi) (Mpa) (psi)
minimum maximum minimum maximum minimum minimum
ABNT NBR 7480:2007 CA 50 (6,3 to 32,0 mm) (500 MPa) – (1,08 x YS) – 1.08 8 (in 10 x d)
(#3 to #6) [60000 psi] – [90000 psi] – – 9 [in 203,2mm]
ASTM A615/A615M – 05a GR 60 (#7 to #8) [60000 psi] – [90000 psi] – – 8 [in 203,2mm]
(#8 to #11) [60000 psi] – [90000 psi] – – 7 [in 203,2mm]
(#3 to #6) [60000 psi] [78000 psi] [80000 psi] – 1,25 14 [in 203,2mm]
ASTM A706/A706M – 05a GR 60
(#7 to #11) [60000 psi] [78000 psi] [80000 psi] – 1,25 12 [in 203,2mm]
Norms attended:
Normas atendidas:
• NBR 7480/2007 • NBR 7480/2007
• ASTM A615 / 706 – 05a – Other norms, upon request. • ASTM A615 / 706 – 05a – Otras normas, bajo consulta.
Round, Square and Barras Redondas, Cuadradas
Largo estándar: 6,00 m. Especificación del acero: SAE 1015, SAE 1020, SAE 1045. Otras especificaciones, bajo consulta.
Annealed Alambres
Wires Recocidos
Belgo Annealed Wire is produced with Los Alambres Recocidos Belgo son producidos
low-carbon steel. For this it is very pliable and con acero de bajo tenor de carbono. Por tanto,
son bastante flexibles y fáciles de usar en
easy to use in applications where folding and/ aplicaciones que exigen pliegues y/o torsiones.
Belgo produces wire that conforms to ABNT NBR 5589 Standards or twisting is required. Widely used in civil Son ampliamente utilizados en construcción civil,
requirements. construction mainly to fix concrete mountings sobretodo para fijar armaduras de hormigón en obras de
in works of any size, furthermore, it is used in cualquier porte y, todavía, son utilizados en el amarrado
Los alambres producidos por Belgo cumplen las exigencias de la de piezas industriales.
Norma ABNT NBR 5589. binding industrial parts.
Nails Clavos
As a converter to mm Packaging: Belgo Nails are packed in plastic 1 kg sacks and shipped in 20 kg
cardboard boxes, except for gauges 06, 08 and 10 of pins with and without
Size (h) BWG (Ø) head and for all Screen Nail gauges that are packed in 500 gram plastic
Estándar de Calidad
El estándar de calidad de los productos ArcelorMittal también está en la línea de perfiles de acero. Ellos son producidos
rigurosamente de acuerdo con la Norma Brasileña NBR 7007 y con normas internacionales, entre las cuales, la ASTM
A 36 y ASTM A 572.
Quality Certificates of ArcelorMittal Sections ensure reliability of the product. Los Certificados de Calidad de los Perfiles ArcelorMittal garantizan la confiabilidad del
The uniformity of the chemical composition, the welding guarantee and bundling producto. La uniformidad en la composición química, la garantía de soldabilidad y la
normalización de los atados facilitan todas las etapas del proceso de transformación
standardization facilitate all stages of the mechanical transformation process of mecánica de nuestros perfiles.
our Sections.
T Sections I Sections
Perfiles T
Main applications:
Dimensions and Mass • Metal structures;
Series in Inches (Tolerance conform to ASTM A 6) • Transportation equipment;
Commercial Designation Linear Mass
pol x pol mm X mm kg/m Ib/ft Perfiles I
3/4 x 1/8” 19,05 x 3,18 0,87 0,58
Principales aplicaciones:
7/8 x 1/8” 22,23 x 3,18 1,03 0,69 • Estructuras metálicas;
1 x 1/8” 25,40 x 3,18 1,19 0,80 • Equipamientos de transporte;
Principales aplicaciones:
Main aplications: • Estructuras metálicas;
• Metal structures; • Torres de líneas de transmisión
• Electric power transmission lines tower; de energía eléctrica;
• Telecommunications towers; • Torres de telecomunicaciones;
• Máquinas e implementos
• Agricultural machines and implementations; agrícolas;
• Industria mecánica en general.
Specifications: NBR 7007, grades MR 250, AR 350, AR 350 COR and AR 415. ASTM A 36, ASTM A 572 GR50, ASTM A 572 GR60, ASTM A 588.
Especificaciones: NBR 7007, grados MR 250, AR 350, AR 350 COR y AR 415. ASTM A 36, ASTM A 572 GR50, ASTM A 572 GR60, ASTM A 588.
U Sections Dimensions and Mass – Series in Inches (Tolerance according to ASTM A-6)
Designation Linear Mass Hight (h) Width (b) Core Thickness (ea)
Main applications:
inches X Ib/ft mm X kg/m kg/m mm inches mm inches mm inches
• Metal structures;
• Agricultural machines 3x3,91 (Light) 76,2x5,80 5,80 76,2 3 35,00 1,377 4,32 0,170
and implementations; 3x4,10 (1ª Alma) 76,2x6,10 6,10 76,2 3 35,80 1,410 4,32 0,170
• Transportation equipment; 3x5,00 (2ª Alma) 76,2x7,44 7,44 76,2 3 38,00 1,498 6,55 0,258
4x5,40 (1ª Alma) 101,6x8,04 8,04 101,6 4 40,20 1,584 4,67 0,184
4x6,25* (2ª Alma) 101,6x9,30 9,30 101,6 4 41,84 1,647 6,27 0,247
Perfiles U 4x7,29 (3 Core) 101,6x10,80 10,80 101,6 4 43,70 1,720 8,15 0,320
6x8,20 (1ª Alma) 152,4x12,20 12,20 152,4 6 48,80 1,920 5,08 0,200
Principales aplicaciones:
• Estructuras metálicas; 6x10,50 (2ª Alma) 152,4x15,60 15,60 152,4 6 51,70 2,034 7,98 0,314
S 240 GP
S 270 GP
S 320 GP
S 355 GP
S 390 GP
S 430 GP
S 460 AP
modulus modulus
b h t s kg/m kg/m2
mm mm mm mm cm2/m single pile of wall cm4/m cm3/m cm3/m cm3/m
U - sections
AU 14 750 408 10.0 8.3 132 77.9 104 28680 1405 820 1663 2 2 3 3 3 3 3
AU 16 750 411 11.5 9.3 147 86.3 115 32850 1600 935 1891 2 2 2 2 2 3 3
AU 17 750 412 12.0 9.7 151 89.0 119 34270 1665 975 1968 2 2 2 2 2 2 3
AU 18 750 441 10.5 9.1 150 88.5 118 39300 1780 1030 2082 2 3 3 3 3 3 3
AU 20 750 444 12.0 10.0 165 96.9 129 44440 2000 1155 2339 2 2 2 3 3 3 3
AU 21 750 445 12.5 10.3 169 99.7 133 46180 2075 1200 2423 2 2 2 2 3 3 3
AU 23 750 447 13.0 9.5 173 102.1 136 50700 2270 1285 2600 2 2 2 3 3 3 3
AU 25 750 450 14.5 10.2 188 110.4 147 56240 2500 1420 2866 2 2 2 2 2 3 3
AU 26 750 451 15.0 10.5 192 113.2 151 58140 2580 1465 2955 2 2 2 2 2 2 3
PU - sections
PU 12 600 360 9.8 9.0 140 66.1 110 21600 1200 715 1457 2 2 2 2 2 2 3
PU 12 10/10 600 360 10.0 10.0 148 69.6 116 22580 1255 755 1535 2 2 2 2 2 2 2
PU 18 -1 600 430 10.2 8.4 154 72.6 121 35950 1670 980 1988 2 2 2 2 2 3 3
PU 18 600 430 11.2 9.0 163 76.9 128 38650 1800 1055 2134 2 2 2 2 2 2 2
PU 22 -1 600 450 11.1 9.0 174 81.9 137 46380 2060 1195 2422 2 2 2 2 2 2 2
PU 22 600 450 12.1 9.5 183 86.1 144 49460 2200 1275 2580 2 2 2 2 2 2 2
PU 28 -1 600 452 14.2 9.7 207 97.4 162 60580 2680 1525 3087 2 2 2 2 2 2 2
PU 28 600 454 15.2 10.1 216 101.8 170 64460 2840 1620 3269 2 2 2 2 2 2 2
PU 32 600 452 19.5 11.0 242 114.1 190 72320 3200 1825 3687 2 2 2 2 2 2 2
Width Height Thickness Sectional Mass Moment Elastic Static Plastic Class
S 240 GP
S 270 GP
S 320 GP
S 355 GP
S 390 GP
S 430 GP
S 460 AP
modulus modulus
b h t s kg/m kg/m2
mm mm mm mm cm2/m single pile of wall cm4/m cm3/m cm3/m cm3/m
PU-R sections
PU 8R 600 280 7.5 6.9 103 48.7 81 10830 775 445 905 3 3 4 4 4 4 -
PU 9R 600 360 7.0 6.4 105 49.5 82 16930 940 545 1115 3 3 4 4 4 4 -
PU 10R 600 360 8.0 7.0 114 53.8 90 18960 1055 610 1245 3 3 3 3 3 4 -
PU 11R 600 360 9.0 7.6 123 58.1 97 20960 1165 675 1370 2 2 3 3 3 3 -
PU 13R 675 400 10.0 7.4 124 65.6 97 25690 1285 750 1515 2 2 2 2 3 3 -
PU 14R 675 400 11.0 8.0 133 70.5 104 28000 1400 815 1655 2 2 2 2 2 2 -
PU 15R 675 400 12.0 8.6 142 75.4 112 30290 1515 885 1790 2 2 2 2 2 2 -
GU - sections
GU 7-600 600 309 7.5 6.4 100 47.0 78 11350 735 435 890 2 2 3 3 - - -
GU 8-600 600 309 8.5 7.1 110 51.8 86 12690 820 485 995 2 2 2 2 - - -
GU 9-600 600 309 9.5 7.9 121 57.0 95 14060 910 540 1105 2 2 2 2 - - -
GU 12-500 500 340 9.0 8.5 144 56.6 113 19640 1155 680 1390 2 2 2 2 - - -
GU 13-500 500 340 10.0 9.0 155 60.8 122 21390 1260 740 1515 2 2 2 2 - - -
GU 15-500 500 340 12.0 10.0 177 69.3 139 24810 1460 855 1755 2 2 2 2 - - -
GU 16-400 400 290 12.7 9.4 197 62.0 155 22580 1560 885 1815 2 2 2 2 - - -
GU 18-400 400 292 15.0 9.7 221 69.3 173 26090 1785 1015 2080 2 2 2 2 - - -
1.) Classification according to EN 1993.5. Class 1 is obtained by verification of the rotation capacity
for a class-2 cross-section. A set of tables with all the data required for design in accordance with
EN 1993-5 is avaible from our Techinical Department.
Steel Long Products South America General Catalogue - October 2008
Width Height Thickness Sectional Mass Moment Elastic Static Plastic Class
area of inertia section moment section
S 240 GP
S 270 GP
S 320 GP
S 355 GP
S 390 GP
S 430 GP
S 460 AP
modulus modulus
b h t s kg/m kg/m2
mm mm mm mm cm2/m single pile of wall cm4/m cm3/m cm3/m cm3/m
Z - sections
AZ 12 670 302 8.5 8.5 126 66.1 99 18140 1200 705 1409 2 3 3 3 3 3 3
AZ 13 670 303 9.5 9.5 137 72.0 107 19700 1300 765 1528 2 2 2 3 3 3 3
AZ 14 670 304 10.5 10.5 149 78.3 117 21300 1400 825 1651 2 2 2 2 2 3 3
AZ 17 630 379 8.5 8.5 138 68.4 109 31580 1665 970 1944 2 2 3 3 3 3 3
AZ 18 630 380 9.5 9.5 150 74.4 118 34200 1800 1050 2104 2 2 2 3 3 3 3
AZ 19 630 381 10.5 10.5 164 81.0 129 36980 1940 1140 2275 2 2 2 2 2 3 3
AZ 25 630 426 12.0 11.2 185 91.5 145 52250 2455 1435 2873 2 2 2 2 2 2 2
AZ 26 630 427 13.0 12.2 198 97.8 155 55510 2600 1530 3059 2 2 2 2 2 2 2
AZ 28 630 428 14.0 13.2 211 104.4 166 58940 2755 1625 3252 2 2 2 2 2 2 2
AZ 46 580 481 18.0 14.0 291 132.6 229 110450 4595 2650 5295 2 2 2 2 2 2 2
AZ 48 580 482 19.0 15.0 307 139.6 241 115670 4800 2775 5553 2 2 2 2 2 2 2
AZ 50 580 483 20.0 16.0 322 146.7 253 121060 5015 2910 5816 2 2 2 2 2 2 2
For minimum steel thickness of 10mm 2 2 2 2 2 2 2
AZ 13 10/10 670 304 10.0 10.0 143 75.2 112 20480 1350 795 1589 2 2 2 2 3 3 3
AZ 18 10/10 630 381 10.0 10.0 157 77.8 123 35540 1870 1095 2189 2 2 2 2 3 3 3
Steel Long Products South America General Catalogue - October 2008
Width Height Thickness Sectional Mass Moment Elastic Static Plastic Class
area of inertia section moment section
S 240 GP
S 270 GP
S 320 GP
S 355 GP
S 390 GP
S 430 GP
S 460 AP
modulus modulus
b h t s kg/m kg/m2
AZ - 700 and mm mm mm mm cm2/m single pile of wall cm4/m cm3/m cm3/m cm3/m
AZ - 770
AZ 12 - 770 770 344 8.5 8.5 120 72.6 94 21430 1245 740 1480 2 2 3 3 3 3 3
AZ 13 - 770 770 344 9.0 9.0 126 76.1 99 22360 1300 775 1546 2 2 3 3 3 3 3
AZ 14 - 770 770 345 9.5 9.5 132 79.5 103 23300 1355 805 1611 2 2 2 2 3 3 3
AZ 14 - 770 -10/10 770 345 10.0 10.0 137 82.9 108 24240 1405 840 1677 2 2 2 2 2 3 3
AZ 17 - 700 700 420 8.5 8.5 133 73.1 104 36230 1730 1015 2027 2 2 3 3 3 3 3
AZ 18 - 700 700 420 9.0 9.0 139 76.5 109 37800 1800 1060 2116 2 2 3 3 3 3 3
AZ 19 - 700 700 421 9.5 9.5 146 80.0 114 39380 1870 1105 2206 2 2 2 3 3 3 3
AZ 20 - 700 700 421 10.0 10.0 152 83.5 119 40960 1945 1150 2296 2 2 2 2 2 3 3
AZ 24 - 700 700 459 11.2 11.2 174 95.7 137 55820 2430 1435 2867 2 2 2 2 2 2 3
AZ 26 - 700 700 460 12.2 12.2 187 102.9 147 59720 2600 1535 3070 2 2 2 2 2 2 2
AZ 28 - 700 700 461 13.2 13.2 200 110.0 157 63620 2760 1635 3273 2 2 2 2 2 2 2
AZ 37 - 700 700 499 17.0 12.2 226 124.2 177 92400 3705 2130 4260 2 2 2 2 2 2 2
AZ 39 - 700 700 500 18.0 13.2 240 131.9 188 97500 3900 2250 4500 2 2 2 2 2 2 2
AZ 41 - 700 700 501 19.0 14.2 254 139.5 199 102610 4095 2370 4745 2 2 2 2 2 2 2