Você está na página 1de 14

Key(按键) Action(功能) Ver

PROGRAM CONTROL(程序控制)
End mission/track
Esc
退出任务/录相
Take control in the track
Ctrl-Q
在录相播放时取得飞机控制权
Track edit Replace mode (disable old editing commands)
Shift-Backspace
编辑录相-覆盖模式(取消现存编辑命令)
Track edit Insert mode (don’t disable old editing commands)
Alt-Backspace
编辑录相-覆盖模式(取消现存编辑命令)
Toggle Sound On or Off
Ctrl-S
伴音开关
Begin recording microphone sound in the track
Ctrl-0
在录相中开始话筒录音
End recording microphone sound in the track
Shift-0
在录相中结束话筒录音
Record On or Off the place of cursor in the track
Alt-0
在录相中打开/关闭鼠标光标
Begin recording subtitle in the track
Ctrl-9
在录相中开始记录字幕
End recording subtitle in the track
Shift-9
在录相中结束记录字幕
Accelerate simulation speed
Ctrl-A
加快游戏速度(快镜头)
Decelerate simulation speed
Alt-A
减慢游戏速度(慢镜头)
Reset normal simulation speed
Shift-A
恢复正常游戏速度
Toggle Pause/Resume/Launch model time at the mission start.
S
任务开始/暂停/继续
Jump into selected AI plane cockpit or leave current plane cockpit
Alt-J
进入 AI 飞机座舱或离开当前飞机座舱
Show frame rate
Ctrl-Backspace
显示即时帧数(FPS)
Upload screen shots to ScreenShots folder, numbering them with 0, 1, 2, …
Print Screen
截图(图像文件保存于 ScreenShots 目录下,自动编号命名)
Show mission goals window during mission 1.02
‘ (quote) Show scores window during multiplayer mission
单人任务时显示任务目标窗口/联网任务时显示成绩窗口
Toggle chat window for communication with all gamers during multiplayer 1.02
Ctrl-M
联网任务时打开对话窗口――向所有玩家发送信息
Toggle chat window for communication with my side during multiplayer 1.02
Alt-M
联网任务时打开对话窗口――向己方玩家发送信息
Recover human plane
Shift-Return
重新获得飞机(复活)

FLIGHT CONTROL(飞行控制)
Nose up
Down Arrow
机首上抬
Nose down
Up Arrow
机首下压
Bank left
Left Arrow
机身向左侧滚

1
Key(按键) Action(功能) Ver
Bank right
Right Arrow
机身向右侧滚
Trim up
Ctrl-. (Period)
向上配平
Trim down
Ctrl-; (Semi-colon)
向下配平
Trim left
Ctrl-, (Comma)
向左配平
Trim right
Ctrl-/ (Slash)
向右配平
Reset trimmers (except AFM planes Su-25, Su-25T)
Ctrl-T
取消配平(Su-25,Su-25T 等高级飞模机型除外)
Rudder left (in flight), left turn (taxi)
Z
左舵(空中),左转(地面)
Rudder right (in flight), right turn (taxi)
X
右舵(空中),右转(地面)
Trim left rudder
Ctrl-Z
左舵配平
Trim right rudder
Ctrl-X
右舵配平
Engage/disengage autopilot. If the autopilot is on then the plane tries to fly
along the route in the NAV mode or to take the level position in combat
A modes.
全自动驾驶(开启后在导航模式中沿导航线飞行,在作战时自动水平)
Toggle altitude stabilization mode
H
打开/取消高度固定
Toggle auto-throttle
J
打开/取消速度固定
Autopilot override Su-25T (press and hold) 1.1
Alt-~ (Grave)
自动飞行模式-任意模式 (用于 SU-25T,保持键)
Autopilot mode – attitude hold 1.1
Alt-1
自动飞行模式-保持高度
Autopilot mode – altitude and roll hold 1.1
Alt-2
自动飞行模式-保持高度和翻滚姿态
Autopilot mode – transition to level flight (panic button) 1.1
Alt-3
自动飞行模式-从任意飞行姿态转变为水平飞行(强制键)
Autopilot mode – barometric altitude hold 1.1
Alt-4
自动飞行模式-保持气压高度
Autopilot mode – radio-altitude hold 1.1
Alt-5
自动飞行模式-保持雷达高度
Autopilot mode – “Route following” mode. Same as “Toggle autopilot” 1.1
command but without auto-throttle
Alt-6
自动飞行模式-“自动导航”模式,类似于“全自动飞行”但取消速度
自动保持
Autopilot disengage 1.1
Alt-9
取消自动飞行模式
Decrease RWR/SPO sound warnings volume 1.1
Alt-, (Comma)
减小 RWR/SPO 报警音量
Increase RWR/SPO sound warnings volume 1.1
Alt-. (Period)
增加 RWR/SPO 报警音量
Reset Current Audible Warning 1.02
Shift-N
重置语音警报

2
Key(按键) Action(功能) Ver
Toggle immortality mode for own plane (doesn't work in network and in
Alt-V protected missions)
无敌模式(联网或加密任务中无效)
Execute “Pugachev’s Cobra”
K
解除仰角抑制(执行“眼镜蛇”机动)
Setting your plane to the takeoff site on the carrier
U
进入航母起飞位置(舰载机专用)

THROTTLE CONTROL(引擎控制)
Engines Start 1.1
RWin-Home
启动飞机引擎
Engines Stop 1.1
RWin-End
关闭飞机引擎
Left engine only
With Alt
与 ALT 键合用时单独操作左引擎
Right engine only
With Shift
与 SHIFT 键合用时单独操作右引擎
Increase Throttle in increments
Page Up
快速增加引擎推力
Decrease Throttle in increments
Page Down
快速减小引擎推力
Increase Throttle smoothly
Key Pad + (Plus)
缓慢增加引擎推力
Decrease Throttle smoothly
Key Pad - (Minus)
缓慢减小引擎推力

MECHANICAL SYSTEMS CONTROL(机械系统控制)


Toggle airbrake
B
减速板开关
Airbrake out
Shift-B
打开减速板
Airbrake in
Ctrl-B
关闭减速板
Eject (Press E three times holding Ctrl down)
Ctrl-E-E-E
弹射跳伞(按住 CTRL 键并同时按三次 E 键)
Toggle active jamming (requires ECM pods in loadout)
E
雷达电子干扰器开关(需挂载 ECM 吊舱)
Toggle active IR jamming for Su-25T only 1.1
Shift-E
红外电子干扰器开关(Su-25T 专用键)
Toggle flaps up/down
F
襟翼升降开关
Flaps down to the landing position
Shift-F
襟翼完全开启
Flaps up
Ctrl-F
襟翼完全收起
Toggle landing gear up/down
G
起落架升降开关
Toggle landing gear down 1.1
Shift-G
放下起落架
Toggle landing gear up 1.1
Ctrl-G
收起起落架
Toggle arrestor hook down/up (Note: Su-33 only) 1.1
Alt-G
着舰钩收放开关(Su-33 专用键)

3
Key(按键) Action(功能) Ver
Canopy open/close
Ctrl-C
座舱盖开关
Release drogue chute
P
释放减速伞
Toggle folding wings (Note: Su-33 only)
Ctrl-P
机翼折叠开关(SU-33 专用键)
Dump fuel (in flight) or refuel (ground) (Note: Hold key)
Ctrl-R
空中释放燃油/机场加油(保持键)
Jettison fuel tanks
Alt-R
抛弃副油箱
Wheel brakes (ground) (Note: Hold key)
W
地面刹车(保持键)
Toggle wingtip smoke
T
拉烟开关(必须挂载发烟弹)
Toggle refueling boom
R
空中受油管伸缩开关
HUD color selection
Ctrl-H
切换 HUD 颜色
Cockpit illumination
L
座舱照明开关
Electric power switch On/Off (for Su-25, Su-25T only) 1.1
Shift-L
电子设备电源开关(仅用于 Su-25、Su-25T)
Switch on-board lights - Steady/Off
For Su-25T - cycle mode on-board lights – Steady/Flash/Off 1.1
Ctrl-L
机身信号灯-打开/关闭
Su-25T 机身信号灯-开启/闪动/关闭
Toggle gear light Near/Far/Off
Alt-L
起落架灯-近光/远光/关闭

NAVIGATION(导航模式)
Select next waypoint or airfield
~ (Grave)
选择下一导航点或机场
Navigation (NAV) modes
1
导航模式
Reset flight clock
Alt-C
重置飞行时钟
Increase air data system barometric altitude (for Su-25, Su-25T only) 1.1
Shift-+ (Plus)
增加空中数据系统气压高度(仅用于 Su-25/Su-25T)
Decrease air data system barometric altitude (for Su-25, Su-25T only) 1.1
Shift-- (Minus)
减小空中数据系统气压高度(仅用于 Su-25/Su-25T)

COMBAT MODES(作战模式)
Toggle to set Beyond Visual Range (BVR/DVB) mode
2
超视距空战模式
Select Close Air Combat – Vertical Scan (CAC/BVB – VS) mode
3
近距空战――垂直扫描模式
Select Close Air Combat – Bore (CAC/BVB – BORE/STR) mode
4
近距空战――孔径模式
Select Close Air Combat – Helmet-Mounted Target Designator (CAC/BVB
5 – HMTD/SHLEM) mode
近距空战――头盔模式
Select Longitudinal Missile Aiming (LNGT/FIO) mode
6
纵向导弹瞄准模式

4
Key(按键) Action(功能) Ver
Select Air-to-ground (GND/ZEMLYA) mode
7
空对地模式
Select Grid (SETKA) mode
8
目视投弹模式
Cycle through targets (Cycle through targets on MFD in AWACS and Ground
~ (Grave) Attack Modes)
目标循环切换
Lock selected target or target point (turn on tracked target)
TAB
锁定所选目标或目标点(打开目标跟踪)
Turn off tracked target
Ctrl-TAB
关闭目标跟踪
Change the RWR/SPO mode 1.02
For US RWR three modes in cycle: all threats, lock threats, launch threats.
For RF SPO two modes in cycle: all threats, lock threats.
Shift-R RWR/SPO(威胁告警)模式切换
美机三种模式:所有威胁、锁定威胁、导弹威胁
俄机两种模式:所有威胁、锁定威胁
Move radar/EOS scan zone UP
Move radar/EOS scan zone UP for RF fighters incrementally in 1000 m. 1.1
Shift-; (Semicolon) (range-elevation BVR search)
向上移动雷达/光电扫描区
俄式歼击机超视距空战模式中向上调整垂直搜索方位 1000m
Move radar/EOS scan zone LEFT
Shift-, (Comma)
向左移动雷达/光电扫描区
Move radar/EOS scan zone DOWN
Move radar/EOS scan zone DOWN for RF fighters incrementally in 1000 m. 1.1
Shift-. (Period) (range-elevation BVR search)
向下移动雷达/光电扫描区
俄式歼击机超视距空战模式中向下调整垂直搜索方位 1000m
Move radar/EOS scan zone RIGHT
Shift -/ (Slash)
向右移动雷达/光电扫描区
Move HUD target designator Box or TV seeker scan zone DOWN
-; (Semicolon)
HUD 目标扫描框/电视寻的探头下移
Move HUD target designator Box or TV seeker scan zone LEFT
-, (Comma)
HUD 目标扫描框/电视寻的探头左移
Move HUD target designator Box or TV seeker scan zone UP
-. (Period)
HUD 目标扫描框/电视寻的探头上移
Move HUD target designator Box or TV seeker scan zone RIGHT
-/ (Slash)
HUD 目标扫描框/电视寻的探头右移

WEAPONS (武器系统)
Cycle through weapons selection
D
循环选择武器
Toggle cannon
C
选择机炮
Dispense chaff & flare (one chaff and two flares)
Q
手动释放干扰弹(单发释放)
Continuously dispense chaff & flares (until supply is exhausted)
Shift-Q
自动释放干扰弹(连续释放)
Dispense chaffs only 1.02
Insert
释放箔条弹(用于干扰雷达制导导弹)
Dispense flares only (in pair) 1.02
Delete
释放闪光弹(用于干扰红外制导导弹)

5
Key(按键) Action(功能) Ver
Fire weapon (for RF aircrafts) and fire gun (for US aircrafts) 1.02
Spacebar
发射武器(俄机),发射机炮(美机)
Release weapon (for US aircrafts only) 1.02
Enter
发射武器(美机)
Launch permission override (for RF aircrafts) 1.02
Alt-W
取消武器发射限制(俄机,可在未锁定目标时发射)
Jettison weapons (in pairs) while airborne, reloads weapons while on the
Ctrl-W ground
成对抛弃武器(空中),重新装填武器(地面)
Toggle salvo mode on or off
Ctrl-V
武器齐射开关
Change rate of fire for the gun of A-10
Cut-off guns burst for RF planes 1.1
Shift-C
改变机炮射速(A10)
改变机炮连发方式:完全连续射击/间断连续射击 (俄机)
Increase the ripple interval for A-10, Su-25, Su-25T 1.1
V
增加投弹间距(A10, Su-25, Su-25T)
Decrease the ripple interval for A-10, Su-25, Su-25T 1.1
Shift-V
减小投弹间距(A10, Su-25, Su-25T)
Change the ripple quantity for A-10
Change the ripple quantity and gun pods selector for Su-25, Su-25T 1.1
Ctrl-Space
改变投弹数量(A10)
改变投弹数量/航炮吊舱选择(Su-25,Su-25T)
Switch the master arm for A-10
Alt-Space
武器保险开关(A10)
Change the release mode for A-10
Shift-Space
单个/成对投弹模式切换(A10)

RADAR & ELECTRO-OPTICAL SYSTEMS (雷达及光电系统)


Toggle radar on/off
I
雷达开关
Easy radar mode toggle
Shift-I
简易雷达模式
Change radar mode RWS/TWS (US) and SCAN/TWS (RF) 1.1
Alt-I
改变 RWS/TWS 雷达模式(美机)或 SCAN/TWS 模式(俄机)
Change radar search modes PRF (pulse repetition frequency) 1.1
RWin-I Interleaved PRF (AUT) – HI PRF (PPS) – MED PRF (ZPS)
改变雷达搜索模式-(切换脉冲重复频率:交错/高频/中频)
Toggle Electro-Optical System (EOS) on/off for Su-27/33 and MiG-29 1.02
Toggle CCRP bombing mode on/off for A-10
O
光电扫描开关(SU33/27、MIG29)
CCRP 投弹模式开关(A10)
Toggle laser target designator on/off for Su-25 and Su-25T 1.1
Shift-O
激光指引器开关(Su-25、Su-25T)
Toggle Low Level TV pod (night track/targeting) for Su-25T 1.1
Ctrl-O
打开/关闭夜视电视制导(Su-25T 专用,需挂载 LLTV 吊舱)
Reset to center all sensor
Ctrl-I
所有探测器归中
Multi-Functional Display (MFD) zoom in
- (Minus)
减小 MFD 显示范围
Multi-Functional Display zoom out
+ (Plus)
增大 MFD 显示范围

6
Key(按键) Action(功能) Ver
Increase radar antenna azimuth limit for F-15 radar
Increase range to target for RF fighters (range-elevation BVR search) 1.1
Increase target size for RF aircraft in 10 m. (Gun funnel or target box Su-25T) 1.1
Increase the depression angle of SPPU gun-pod barrels (for Su-25/25T) 1.1
Ctrl-+ 增大雷达天线方位角(用于 F-15)
增大目标距离仰角(用于俄机超视距搜索)
增大目标显示尺寸(用于 Su-25T 的机炮漏斗线和目标框)
增大 SPPU 外挂式航炮的俯角(用于 Su-25/25T)
Decrease radar antenna azimuth limit for F-15 radar
Decrease range to target for RF fighters (range-elevation BVR search) 1.1
Decrease target size for RF aircraft in 10 m. (Gun funnel or target box Su- 1.1
25T) 1.1
Ctrl-- Decrease the depression angle of SPPU gun-pod barrels (for Su-25/25T)
减小雷达天线方位角(用于 F-15)
减小目标距离仰角(用于俄机超视距搜索)
减小目标显示尺寸(用于 Su-25T 的机炮漏斗线和目标框)
减小 SPPU 外挂式航炮的俯角(用于 Su-25/25T)
Increase target size for RF aircraft smooth. (Gun funnel or target box Su-25T) 1.1
Increase the depression angle of SPPU gun-pod barrels smooth (for Su- 1.1
Alt-+ 25/25T)
平滑增大目标显示尺寸(用于 Su-25T 的机炮漏斗线和目标框)
平滑增大 SPPU 外挂式航炮的俯角(用于 Su-25/25T)
Decrease target size for RF aircraft smooth. (Gun funnel or target box Su-25T) 1.1
Decrease the depression angle of SPPU gun-pod barrels smooth (for Su- 1.1
Alt-- 25/25T)
平滑减小目标显示尺寸(用于 Su-25T 的机炮漏斗线和目标框)
平滑减小 SPPU 外挂式航炮的俯角(用于 Su-25/25T)

AUTO LOCK ON(自动锁定)


Lock on to nearest enemy air target
ScrollLock
锁定最近的敌空中目标
Lock on to enemy air target nearest the center of the player’s view
Alt-ScrollLock
锁定距视野中线最近的敌空中目标
Lock on to previous enemy air target
Shift-Insert
锁定前一个敌空中目标
Lock on to next enemy air target
Shift-NumLock
锁定下一个敌空中目标
Lock on to nearest enemy ground target
Shift-ScrollLock
锁定最近的敌地面目标
Lock on to enemy ground target nearest the center of the player’s view
Control-ScrollLock
锁定距视野中线最近的敌地面目标
Lock on to previous enemy ground target
Shift-Delete
锁定前一个敌地面目标
Lock on to next enemy ground target
Ctrl-NumLock
锁定下一个敌地面目标

RADIO COMMANDS(无线电通讯)
Communication menu
\
打开无线电呼叫对话框
Dispatch wingman on mission. When mission completion, join up (Complete 1.02
Shift-[ mission and rejoin)
命令僚机执行任务,任务完成后归队
Dispatch wingman on mission. When mission completion, return to base 1.02
Ctrl-[
(Complete mission and RTB)

7
Key(按键) Action(功能) Ver
命令僚机执行任务,任务完成后返航
Toggle tight formation or loose formation (Toggle formation) 1.02
Shift-]
命令机群组成密集/松散编队
Rejoin formation 1.02
Alt+[
命令僚机重返编队
Attack my target
[
命令僚机攻击长机指定目标
Cover my six o’clock (Cover me)
]
命令僚机掩护长机后方
Radio request to AWACS for bearing and distance to the home airfield
Alt-H
呼叫预警机:请求机场方位、距离
Radio request to AWACS for bearing and distance to the tanker
Alt-T
呼叫预警机:请求加油机方位、距离

VIEW SELECTION(视角选择)
Cockpit View
F1
机内座舱视角
Natural Head Movement View
Ctrl-F1
头部自然摆动视角
HUD Only View
Alt-F1
单纯平显视角
External View – All Aircraft & Parachutist
F2
机外视角
Aircraft labels toggle
Shift-F2
打开/关闭飞机标签
Fly-By View
F3
飞越视角
Fly-By Jump View (saving current camera position)
Ctrl-F3
从其它视角切换到飞越视角(保留当前摄像机位置)
Rear View 1.02
F4
后视视角
Chase View 1.02
Ctrl-F4
机后尾随视角
Air Combat View (Cycles through locked enemy planes around the current
plane from nearest to farthest. Looks at the enemy plane from the current
F5 plane.)
空战视角
Air to Ground Combat View (Cycles through locked enemy vehicles/ships
around the current plane from nearest to farthest. Looks at the enemy
Ctrl-F5 vehicle/ship from the current plane.)
空对地视角
Weapons View
F6
武器视角
Chase Weapon View (“Weapon To Target” View)
Ctrl-F6
武器追尾视角(导弹/炸弹对目标视角
Launched missiles labels toggle
Shift-F6
打开/关闭所发射武器标签
Active Ground Objects View
F7
动态地面物体视角
Target View
F8
目标视角

8
Key(按键) Action(功能) Ver
All targets / Player plane targets toggle for the target view.
Alt-F8
目标视角中循环切换所有目标
Ship View
F9
舰船视角
Landing Signal Officer (LSO) View
Alt-F9
航母着舰信号器视角
Ships and ground units labels toggle
Shift-F9
打开/关闭舰船及地面单元标签
Theater View
F10
地图视角
Object labels toggle
Shift-F10
打开/关闭物体标签
Tower & Terrain View
F11
塔台及地表视角
Switches to Tower & Terrain View saving current view position (freezing
camera position). When switching from Theater View (F10) the current F11
camera position comes from the F10 camera position, but it’s altitude does not
Ctrl-F11
exceed 20km.
在当前视角中固定摄像机位置。可在地图中指定地点后用 F11 切换观看,但高度
不得超过 20000 米
Static Objects View
F12
静态物体视角
Civilian transport
Ctrl-F12
民用运输视角
Trains/cars toggle for Ctrl-F12 view
Shift-F12
火车/汽车切换视角
VIEW MODIFIERS(视角调整)
Places external views to Red coalition objects only
Ctrl-Home
在外部视角中只显示友机
Places external views to Blue coalition objects only
Ctrl-End
在外部视角中只显示敌机
Places external views to all objects
Ctrl-Delete
在外部视角中显示所有飞机
Toggle Padlock View (Note: for F1, F2, F6, F7, F8, F9, Alt-F9 LSO View &
F11 Tower View only)
Keypad Del
切换目视锁定视角(只用于 F1、F2、F6、F7、F8、F9、ALT-F9、F11
等视角中)
Toggle Terrain Point Padlock View (Note: for F2, F6, F7, F8, F9 Views only)
Ctrl-Keypad Del
切换到地表目视视角(只用于 F2、F6、F7、F8、F9 等视角中)
Toggle “From object/To object” camera direction mode (Note: for F2, F6, F7,
F8, F9, F12 Views only). Changes cockpit view direction from left to roght
Backspace and vice versa.
切换“目标到目标”视角方向(只用于 F2、F6、F7、F8、F9、F12 等视
角中)
Exclude current object from the view switching
Alt-Delete
在视野中隐藏当前物体
Include all excluded objects to the view switching
Alt-Insert
显示当前视野中隐藏物体
Reverse objects switching direction
Ctrl-PageUp
反序目标切换
Forward objects switching direction
Ctrl-PageDown
正序目标切换

9
Key(按键) Action(功能) Ver
Switch to Weapons Release and Track View for F1 Cockpit, F2 External, F4
Chase, F7 Active Ground Targets, and F9 Ship Views. Switches to ANY
Ctrl Key Pad +(plus) weapon now, not to bombs&missiles only!
武器发射视角切换开关
Starts moving camera forward (F11Tower & Terrain View only)
Alt-Key Pad *
开始向前移动摄像机(用于 F11 视角)
Starts moving camera backward (F11Tower & Terrain View only)
Alt-Key Pad /
开始向后移动摄像机(用于 F11 视角)
Stops moving camera (F11 Tower & Terrain View)
Key Pad 5
停止摄像机移动(用于 F11 视角)
Returns to Tower & Terrain View starting point
Ctrlt-Key Pad 5
返回塔台/地表视角起始点
External View Information Display Cycle Toggle
Y
机外视角信息栏状态切换
Earth Coordinates Units Toggle (Degrees/Meters)
Alt-Y
坐标位置
Insert video edit mode toggle (replace mode is on by default)
Alt-Backspace
视频编辑-插入模式
Replace video edit mode toggle (default)
Shift-Backspace
视频编辑-覆盖模式
External camera jiggle toggle
Shift-J
外部视角中摄像机抖动效果开关
Toggle local/object camera rotation mode for F2, F4, F6, F7, F8, F9 and F12
views.
Shift-Esc
在当前视角中切换为摄像机旋转模式(用于 F2、F4、F6、F7、F8、
F9、F12 等视角)
Keep camera above terrain altitude mode toggle in the F11 view.
Alt-K
在 F11 视角中保持/取消保持摄像机距地面高度

COCKPIT VIEW CONTROL(座舱内视角控制)


Move head down and left
Key Pad 1
视角向左下移动
Move head down
Key Pad 2
视角向下移动
Move head down and right
Key Pad 3
视角向右下移动
Move head left
Key Pad 4
视角向左移动
Centers camera
Key Pad 5
视角归中
Move head right
Key Pad 6
视角向右移动
Move head up and left
Key Pad 7
视角向左上移动
Move head up
Key Pad 8
视角向上移动
Move head up and right
Key Pad 9
视角向右上移动
Move head quickly
Shift – Key Pad 1-9
快速平滑移动视角
Move head with pan steps around pan base
Ctrl – Key Pad 1-9
视角移动即时切换

10
Key(按键) Action(功能) Ver
Center head to pan base
Ctrl – Key Pad 5
视角回中
Move pan steps base
Alt – Key Pad 1-9
分段式视角移动
Center pan steps base
Alt – Key Pad 5
分段移动视角时的视角归中
Pan steps mode toggle (to return or not to return camera tacitly)
Alt – Z
视野移动方式切换(选择移动视角后松开按键视角回中或不回中)
Enable/change target padlock view. Locks terrain point in the A2G mode.
Key Pad Del
打开/切换目视锁定
Disable padlock view 1.02
Key Pad NumLock
关闭目视锁定
All missile padlock toggle
Shift-Key Pad Del
所有导弹目视锁定切换
Threat missile padlock toggle
Alt-Key Pad Del
来袭导弹目视锁定切换
Move head to view right mirror
M
右后视镜视角
Move head to view right mirror
N
左后视镜视角
Zoom in (narrow view angle). With Shift – Zoom in to limit
Key Pad * (Asterisk)
视野拉近(与 SHIFT 合用可拉到最近)
Zoom out (enlarge view angle). With Shift – Zoom out to limit
Key Pad / (Divide)
视野推远(与 SHIFT 合用推到最远)
Set default zoom (default view angle).
Key Pad Enter
恢复默认视野距离
Jump to cockpit panel snap view and back (Note: Hold down then release)
Hold down Key Pad 0 and press Key Pad 1-9 to jump around different
Key Pad 0 instruments with close-up view.
仪表盘视角切换(保持键)
Cockpit panel snap view mode toggle. Don’t hold down. Then press Key Pad
1-9 to jump around different instruments with close-up view. Press Ctrl - Key
Ctrl - Key Pad 0 Pad 0 once more to return to normal mode.
仪表盘视角切换(非保持键)

Save current camera position for the last cockpit snap view, corresponding to
Key Pad 0 – 9, left or right mirror view or default view. May be different for
different planes! If the user runs the mission then all new custom camera snap
positions will be saved in the Config/View/SnapViews.lua file. If the user
records the track then all new custom camera snap positions will be saved in
the track file and then will always be used for that track in future. Note: saving
Alt - Key Pad 0 snap views feature is disabled by default. To enable it set parameter
DisableSnapViewsSaving = false in the Config/View/Cockpit.lua file. You
may always force using default snap views by parameter
UseDefaultSnapViews = true.
保存当前座舱内视角位置

Alternative snap view controls (may be reassigned in options to other


RWin – Key Pad 0-9 keys/buttons)
视角快速移动控制(允许在设置中重新定义为其它按键)
Fast cockpit mouse speed
Ctrl – Right Shift
增快座舱内鼠标移动视线速度
Slow cockpit mouse speed
Alt – Right Shift
减慢座舱内鼠标移动视线速度

11
Key(按键) Action(功能) Ver
Normal cockpit mouse speed
Left Shift – Right Shift
还原座舱内鼠标移动视线速度
Fast cockpit keyboard speed
Ctrl – Left Shift
增快座舱内键盘移动视线速度
Slow cockpit keyboard speed
Alt – Left Shift
减慢座舱内键盘移动视线速度
Normal cockpit keyboard speed
Right Shift – Left Shift
还原座舱内键盘移动视线速度
Changes view direction from left to right and vice versa.
Backspace
改变视角移动方向

EXTERNAL VIEW CONTROL(扩展视角控制)


Rotate viewpoint down and left
Key Pad 1
向左下旋转视点
Rotate viewpoint down
Key Pad 2
向下旋转视点
Rotate viewpoint down and right
Key Pad 3
向右下旋转视点
Rotate viewpoint left
Key Pad 4
向左旋转视点
Centers view (stops F11 viewpoint moving)
Key Pad 5
视点归中(在 F11 中停止视点移动)
Returns to starting point (F11 Tower & Terrain View only)
Ctrl-Key Pad 5
返回起始位置(在 F11 中回到默认位置)
Rotate viewpoint right
Key Pad 6
向右旋转视点
Rotate viewpoint up and left
Key Pad 7
向左上旋转视点
Rotate viewpoint up
Key Pad 8
向上旋转视点
Rotate viewpoint up and right
Key Pad 9
向右上旋转视点
Move viewpoint forward
Key Pad * (Asterisk)
向前移动视点
Move viewpoint back
Key Pad / (Slash)
向后移动视点
Ctrl-Key Pad * Zoom in (narrow view angle).
(Asterisk) 扩展视角拉近
Ctrl-Key Pad / Zoom out (enlarge view angle).
(Divide) 扩展视角推远
Set default zoom (default view angle).
Ctrl-Key Pad Enter
扩展视角还原为默认大小
Moves viewpoints at a faster rate (Note: Hold down Shift and view key)
Shift-(all view keys)
快速移动视角(组合键-保持键
Moves camera instead of rotate it.
Ctrl-(Key Pad 1-9)
改旋转视角为移动视角

MISSION EDITOR(任务编辑)
File(文件)
Create new mission file
Ctrl-N
新建任务文件
Open mission file
Ctrl-O
打开任务文件

12
Key(按键) Action(功能) Ver
Merge mission file
Alt-M
合并任务文件
Save mission file
Ctrl-S
保存任务文件
Save As mission file
Ctrl-Shift-S
任务文件另存
Exit Mission Editor and return to Main Menu
Alt-X
退出任务编辑返回主选项界面
Edit(编辑)
Delete selected object
Del
删除所选目标物体
Classify mission
Ctrl-Shift-C
任务加密
Declassify mission
Ctrl-Shift-D
任务解密
View(查看)
Hide selected object
Ctrl-H
隐藏所选物体
Actual size view (Crimean view)
Ctrl-A
地图全景
Zoom in
Ctrl-+
扩大地图
Zoom out
Ctrl--
缩小地图
Flight(任务)
Display Briefing
Ctrl-B
显示任务简报
Display Debriefing
Ctrl-D
显示战报成绩
Start mission
Ctrl-F
开始任务
Record track file
Ctrl-R
录相
Play track
Ctrl-P
播放录相
Video edit
Ctrl-E
视频编辑
Network Play
Ctrl-L
联网对战
Customize(其它)
Failures
Ctrl-Shift-F
飞机故障设定
Weather
Ctrl-Shift-W
天气设定
Encyclopedia
Ctrl-Shift-E
百科全书
Options
Ctrl-Shift-O
选项设定
Alt-Z Remove all objects from Victory Condition of mission or campaign stage
取消单一任务或战役任务中的胜利条件

13
Axis(轴) Action(功能) Ver
Control of an airсraft on a pitch
Pitch
飞机俯仰控制
Control of an airсraft on a roll
Roll
飞机侧滚控制
Control of an airсraft on a yaw
Rudder
舵控制
Control of engines thrust
Thrust
引擎推力控制
Control of the left engine thrust
Left thrust
左引擎推力控制
Control of the right engine thrust
Right thrust
右引擎推力控制
Control of a view in a horizontal
Horizontal view
水平视角控制
Control of a sight in a vertical
Vertical view
垂直视角控制
Control of a zoom view (increase and decreasing of a focal length in the
Zoom view cockpit)
视角缩放控制
Trim on a pitch 1.02
Trim pitch
俯仰配平
Trim on a roll 1.02
Trim roll
侧滚配平
Trim on a yaw 1.02
Trim rudder
舵配平
Slew of the radar/EOS scan zone in the horizontal for RF fighters and change 1.02
radar antenna azimuth limit for F-15
Radar slew horizontal
俄机:雷达/光电扫描区水平移动控制
美机:雷达天线方位角控制
Slew of the radar/EOS scan zone in the vertical 1.02
Radar slew vertical
雷达/光电扫描区垂直移动控制
Change of a range scale on a MFD and HUD 1.02
MFD range
改变 MFD/HUD 上探测距离
Movement a TDS (radar cursor) in the horizontal 1.02
TDS slew horizontal
雷达锁定框水平移动
Movement a TDS (radar cursor) in the vertical 1.02
TDS slew vertical
雷达锁定框垂直移动
Increase and decrease the target base for weapon systems. For example: 1.1
Target specified size adjust target box for autotrack at SHKVAL system (Su-25T), size of gun
(wingspan for funnel) funnel for Russian fighters.
武器漏斗线间距调整

14

Você também pode gostar