Escolar Documentos
Profissional Documentos
Cultura Documentos
15/42-15/43-15/72-55/30-06/30
Corrosion protection:
KS - Spray phosphating
Powder primer coating
Powder finish coating
Special design:
- ambient temperature (-50°C- +60°C), (-60°C- +60°C), (0- +120°C)
- increased corrosion protection KX
- DS - IP68 – double sealing terminal compartment additional sealed against interior
Electrical equipment:
Basic wiring diagram TPA00R1AA-101-000 contains:
- single limit switch (1NC i 1NO) for each end positions, not galvanically isolated
- single torque switch (1NC i 1NO) or any intermediate position, not galvanically isolated
- thermo switch, preventing overheating, automatic reset
- heater in switch compartment, self-regulating PTC heater, standard 230VAC/50Hz
- motor 3x400VAC/50Hz
- blinker transmitter, running indication
Special design:
- mechanical position indicator;
- position feedback signal, analogue; 0/4 – 20 mA (RWG)
- tandem limit switches (2NO i 2NC), galvanically isolated
- tandem torque switches (2NO i 2NC), galvanically isolated
- intermediate position limit switches (DUO), available for any intermediate position
Tests/adjustment:
Test after mounting: leak test according to DIN 3230 part 4
Closing operation: The actuator is switched off by torque switching, but indicates error if the torque switches
are operated before the limit switch is activated
Opening operation: The actuator is switched off by limit switching
C1 C2
H2
D H4
H1
H3
Dimensions Nominal
AUMA Closing Power Open/closing Closing
current****
Weight
Type no. speed***** (PN) time C1 C2 D H1 H2 H3 H4 torque (IN) kg
AVK Ref. nos. DN turns/min kW s mm mm mm mm mm mm mm Nm A incl. valve
7 52-30-01-7100300 40 SA 07.6* 45 0,20 15 265 249 105 467 210 542 160 40 1,6 34
752-30-01-7100300 50 SA 07.6* 45
0,20 15 265 249 105 467 210 550 160 40 1,6 35
752-30-01-7100300 65 SA 07.6* 45
0,20 19 265 249 105 475 210 568 160 60 1,6 38
752-30-01-7100300 80 SA 07.6* 45
0,20 17 265 249 105 495 210 595 160 35 1,6 42
752-30-01-7100300 100 SA 07.6* 45 0,20 21 265 249 105 558 210 668 160 35 1,6 39
752-30-01-7100300
125 SA 07.6* 45 0,20 26 265 249 105 599 210 724 160 40 1,6 43
752-30-01-7100300
150 SA 07.6* 45 0,20 26 265 249 105 653 210 796 160 40 1,6 52
752-30-03-7100300
200 SA 10.2 45 0,40 35 282 254 125 722 210 892 200 80 2,5 91
752-30-05-5100300 250 SA 14.2 22 0,45 101 385 336 153 798 226 998 315 180 2,5 161
752-30-05-5100300 300 SA 14.2 22
0,45 120 385 336 153 920 226 1148 315 200 2,5 208
752-30-06-5100300 350 SA 14.6 22 0,8 161 385 336 153 1090 226 1350 400 300 5,3 382
752-30-06-5100300 400 SA 14.6 22
0,8 161 385 336 153 1102 226 1392 400 300 5,3 404
752-30-06-5100300 450 SA 14.6 22 0,8 161**/110***
385 336 153 1102 226 1422 400 300/450***
5,3 422
752-30-06-5100300 500 SA 14.6 22
0,8 161**/120***
385 336 153 1102 226 1460 400 300/450***
5,3 480
752-30-06-5100300 600 SA 14.6 22 0,8 145*** 430 365 190 1622 230 2042 500 500*** 5,3 764
For gate valve 55/30
752-30-08-5100300 450 SA 16.2 16 1,5 150 510 355 190 1440 230 1760 500 500 4,8 718
752-30-08-5100300 500 SA 16.2 16 1,5 165 510 355 190 1440 230 1798 500 500 4,8 748
752-30-08-5100300 600 SA 16.2 16 1,5 199 510 355 190 1580 230 2000 500 700 4,8 913
* F10 flange, B3 = ø 20 mm
** type 15/72/***type 06/30
**** given electrical data concern supply voltage 3x400VAC/50Hz for short-time duty S2-15min
***** other closing speeds for request in the range 4-45 rpm