Escolar Documentos
Profissional Documentos
Cultura Documentos
WPS No : TWS/WPS/01
Squre Groove
Socket
Backing(Yes/No): Yes
Backing Material:
√ Metal
Nonfusing Metal
Nonmetallic
Other
BASE METAL(QW-403):
P.No. 8 Group No. 1 To P.No. 8 Group No. 1
OR
Specification,type, and grade :
OR
Chemical Analysis,and Mechanical properties :
to Chemical Analysis,and Mechanical properties :
Thickness Range:
Base Metal: Groove- 1.5 mm - 20.00 mm Fillet - All
Pipe Dia. Range: Groove- 73 mm and more Outer Diameter Fillet - All
Others: NIL
FILLER METALS(QW-404):
Parameter Root & Hot Pass Filler & final pass
Spec. No.(SFA) 5.9 5.9
AWS No.(Class) ER316L ER316L
F.No. 6 6
A.No. 8 8
Size of Filler Metals 1.6 mm 2.4 mm & 3.2 mm
Weld Metal :
Groove 20 mm max 20 mm max
Thickness Range
Fillet ALL ALL
Electrode Flux (Class) NA NA
Flux Trade Name NA NA
Consumable Insert Nil Nil
Other:
Each Base Metal - Filler Metal Combination Should be Recorded Individually
Welding Procedure Specification (WPS)
(ASME SEC-IX QW-482)
TECHNIQUE(QW-410):
Stringe or Weave Bead - String Bead and Wavie Bead
Orifice or Gas Cup Size - N/A
Initial and Interpass Cleaning(Brushing,Grinding,etc.) - Wire Brushing or Grinding or both
NAME NAME
DESN. DESN.
DATE DATE
Procedure Qualifiaion Record
(ASME SEC-IX )
Company MALIK POLYCHEM LTD.
PQR No : MPL/PQR/01
WPS No : MPL/WPS/01
JOINTS (QW-402)
Joint Details
FILLER METALS (QW-404) Root & Hotpass Others (Gases) (Mixture) (Flow Rate)
Spec. No. ( SFA ) 5.9 5.9 Sheilding Argon 99.995% 10-15 LPM
AWS No. (Class) ER 316L ER 316L Tracking ----- ------- ------
Filler Metal F. No. 6 6 Backing ----- ----- -----
A. No. 8 8 Purging up to Hot pass -----
Size of Filler Metals 1.6 2.4 ELECTRICAL CHARACTERISTICS (QW-409)
Weld Metal thickness 12.0 mm max Current DC
Others ---- ---- Polarity DCEN
POSITION (QW-405) Tungsten Electrode size N/A
Position of Groove 1G
Others : N/A
Weld Progression (uphill/downhill) Uphill
TECHNIQUE (QW-410)
N/A
OTHER TESTS Radiography Date
TYPE OF TEST N/A
WE CERTIFY THAT THE STATEMENT IN THIS RECORD ARE CORRECT AND TEST WELDS WERE PREPARED
WELDED AND TESTED IN ACCORDANCE WITH THE REQUIREMENTS OF SECTION IX OF ASME CODE.