Escolar Documentos
Profissional Documentos
Cultura Documentos
Sketch
2. Material Data
2.1 Used : Plate, t = 8 mm, for clip support
material : A-36
Yield strength (Fy) : 250 mpa = 2549.29 kg/cm2
Allowable axial stress : Fa = 0.66 x Fy = 1682.5314 kg/cm2
Allowable shear stress : Fv = 0.4 x Fy = 1019.716 kg/cm2
3. Loading Data
3.1 Dead Load + Live load WT : 7000 Kg
∑Fy = 0
n.NT = WT
NT = 7,000 kg
4. Strength Control
Where :
fta = Average tension stress on holed section
Fa = Allowable axial stress = 1682.5314 kg/cm2
NT = Tension force acting on net section area = 7,000 Kg
Anet = Net Area of section excluding hole = A-nh.t.d = 687.2 mm2 = 6.87
Hole diameter (d) = 38.1 mm
t = Plate thickness = 8 mm
nh = number of bolt hole = 1 pcs
kg/cm2
kg/cm2
cm2
145 Psi = 0 kg/m2
JOB NO. DOC NO. REV.
CAL-TP-001-A4 0
DATE: 10-May-11